ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.98 by root, Sat Dec 22 06:10:25 2007 UTC vs.
Revision 1.155 by root, Mon May 19 13:48:20 2008 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head1 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
		11	// a single header file is required
11	#include <ev.h>	12	#include <ev.h>
12		13
		14	// every watcher type has its own typedef'd struct
		15	// with the name ev_<type>
13	ev_io stdin_watcher;	16	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	17	ev_timer timeout_watcher;
15		18
		19	// all watcher callbacks have a similar signature
16	/* called when data readable on stdin */	20	// this callback is called when data is readable on stdin
17	static void	21	static void
18	stdin_cb (EV_P_ struct ev_io *w, int revents)	22	stdin_cb (EV_P_ struct ev_io *w, int revents)
19	{	23	{
20	/* puts ("stdin ready"); */	24	puts ("stdin ready");
21	ev_io_stop (EV_A_ w); /* just a syntax example */	25	// for one-shot events, one must manually stop the watcher
22	ev_unloop (EV_A_ EVUNLOOP_ALL); /* leave all loop calls */	26	// with its corresponding stop function.
		27	ev_io_stop (EV_A_ w);
		28
		29	// this causes all nested ev_loop's to stop iterating
		30	ev_unloop (EV_A_ EVUNLOOP_ALL);
23	}	31	}
24		32
		33	// another callback, this time for a time-out
25	static void	34	static void
26	timeout_cb (EV_P_ struct ev_timer *w, int revents)	35	timeout_cb (EV_P_ struct ev_timer *w, int revents)
27	{	36	{
28	/* puts ("timeout"); */	37	puts ("timeout");
29	ev_unloop (EV_A_ EVUNLOOP_ONE); /* leave one loop call */	38	// this causes the innermost ev_loop to stop iterating
		39	ev_unloop (EV_A_ EVUNLOOP_ONE);
30	}	40	}
31		41
32	int	42	int
33	main (void)	43	main (void)
34	{	44	{
		45	// use the default event loop unless you have special needs
35	struct ev_loop *loop = ev_default_loop (0);	46	struct ev_loop *loop = ev_default_loop (0);
36		47
37	/* initialise an io watcher, then start it */	48	// initialise an io watcher, then start it
		49	// this one will watch for stdin to become readable
38	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);	50	ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
39	ev_io_start (loop, &stdin_watcher);	51	ev_io_start (loop, &stdin_watcher);
40		52
		53	// initialise a timer watcher, then start it
41	/* simple non-repeating 5.5 second timeout */	54	// simple non-repeating 5.5 second timeout
42	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);	55	ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
43	ev_timer_start (loop, &timeout_watcher);	56	ev_timer_start (loop, &timeout_watcher);
44		57
45	/* loop till timeout or data ready */	58	// now wait for events to arrive
46	ev_loop (loop, 0);	59	ev_loop (loop, 0);
47		60
		61	// unloop was called, so exit
48	return 0;	62	return 0;
49	}	63	}
50		64
51	=head1 DESCRIPTION	65	=head1 DESCRIPTION
52		66
53	The newest version of this document is also available as a html-formatted	67	The newest version of this document is also available as an html-formatted
54	web page you might find easier to navigate when reading it for the first	68	web page you might find easier to navigate when reading it for the first
55	time: L<http://cvs.schmorp.de/libev/ev.html>.	69	time: L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.
56		70
57	Libev is an event loop: you register interest in certain events (such as a	71	Libev is an event loop: you register interest in certain events (such as a
58	file descriptor being readable or a timeout occurring), and it will manage	72	file descriptor being readable or a timeout occurring), and it will manage
59	these event sources and provide your program with events.	73	these event sources and provide your program with events.
60		74
…		…
65	You register interest in certain events by registering so-called I<event	79	You register interest in certain events by registering so-called I<event
66	watchers>, which are relatively small C structures you initialise with the	80	watchers>, which are relatively small C structures you initialise with the
67	details of the event, and then hand it over to libev by I<starting> the	81	details of the event, and then hand it over to libev by I<starting> the
68	watcher.	82	watcher.
69		83
70	=head1 FEATURES	84	=head2 FEATURES
71		85
72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	86	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	87	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	88	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	89	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
…		…
82		96
83	It also is quite fast (see this	97	It also is quite fast (see this
84	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent	98	L<benchmark|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	99	for example).
86		100
87	=head1 CONVENTIONS	101	=head2 CONVENTIONS
88		102
89	Libev is very configurable. In this manual the default configuration will	103	Libev is very configurable. In this manual the default (and most common)
90	be described, which supports multiple event loops. For more info about	104	configuration will be described, which supports multiple event loops. For
91	various configuration options please have a look at B<EMBED> section in	105	more info about various configuration options please have a look at
92	this manual. If libev was configured without support for multiple event	106	B<EMBED> section in this manual. If libev was configured without support
93	loops, then all functions taking an initial argument of name C<loop>	107	for multiple event loops, then all functions taking an initial argument of
94	(which is always of type C<struct ev_loop *>) will not have this argument.	108	name C<loop> (which is always of type C<struct ev_loop *>) will not have
		109	this argument.
95		110
96	=head1 TIME REPRESENTATION	111	=head2 TIME REPRESENTATION
97		112
98	Libev represents time as a single floating point number, representing the	113	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	114	(fractional) number of seconds since the (POSIX) epoch (somewhere near
100	the beginning of 1970, details are complicated, don't ask). This type is	115	the beginning of 1970, details are complicated, don't ask). This type is
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	116	called C<ev_tstamp>, which is what you should use too. It usually aliases
…		…
181	See the description of C<ev_embed> watchers for more info.	196	See the description of C<ev_embed> watchers for more info.
182		197
183	=item ev_set_allocator (void *(*cb)(void *ptr, long size))	198	=item ev_set_allocator (void *(*cb)(void *ptr, long size))
184		199
185	Sets the allocation function to use (the prototype is similar - the	200	Sets the allocation function to use (the prototype is similar - the
186	semantics is identical - to the realloc C function). It is used to	201	semantics are identical to the C<realloc> C89/SuS/POSIX function). It is
187	allocate and free memory (no surprises here). If it returns zero when	202	used to allocate and free memory (no surprises here). If it returns zero
188	memory needs to be allocated, the library might abort or take some	203	when memory needs to be allocated (C<size != 0>), the library might abort
189	potentially destructive action. The default is your system realloc	204	or take some potentially destructive action.
190	function.	205
		206	Since some systems (at least OpenBSD and Darwin) fail to implement
		207	correct C<realloc> semantics, libev will use a wrapper around the system
		208	C<realloc> and C<free> functions by default.
191		209
192	You could override this function in high-availability programs to, say,	210	You could override this function in high-availability programs to, say,
193	free some memory if it cannot allocate memory, to use a special allocator,	211	free some memory if it cannot allocate memory, to use a special allocator,
194	or even to sleep a while and retry until some memory is available.	212	or even to sleep a while and retry until some memory is available.
195		213
196	Example: Replace the libev allocator with one that waits a bit and then	214	Example: Replace the libev allocator with one that waits a bit and then
197	retries).	215	retries (example requires a standards-compliant C<realloc>).
198		216
199	static void *	217	static void *
200	persistent_realloc (void *ptr, size_t size)	218	persistent_realloc (void *ptr, size_t size)
201	{	219	{
202	for (;;)	220	for (;;)
…		…
241		259
242	An event loop is described by a C<struct ev_loop *>. The library knows two	260	An event loop is described by a C<struct ev_loop *>. The library knows two
243	types of such loops, the I<default> loop, which supports signals and child	261	types of such loops, the I<default> loop, which supports signals and child
244	events, and dynamically created loops which do not.	262	events, and dynamically created loops which do not.
245		263
246	If you use threads, a common model is to run the default event loop
247	in your main thread (or in a separate thread) and for each thread you
248	create, you also create another event loop. Libev itself does no locking
249	whatsoever, so if you mix calls to the same event loop in different
250	threads, make sure you lock (this is usually a bad idea, though, even if
251	done correctly, because it's hideous and inefficient).
252
253	=over 4	264	=over 4
254		265
255	=item struct ev_loop *ev_default_loop (unsigned int flags)	266	=item struct ev_loop *ev_default_loop (unsigned int flags)
256		267
257	This will initialise the default event loop if it hasn't been initialised	268	This will initialise the default event loop if it hasn't been initialised
…		…
259	false. If it already was initialised it simply returns it (and ignores the	270	false. If it already was initialised it simply returns it (and ignores the
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	271	flags. If that is troubling you, check C<ev_backend ()> afterwards).
261		272
262	If you don't know what event loop to use, use the one returned from this	273	If you don't know what event loop to use, use the one returned from this
263	function.	274	function.
		275
		276	Note that this function is I<not> thread-safe, so if you want to use it
		277	from multiple threads, you have to lock (note also that this is unlikely,
		278	as loops cannot bes hared easily between threads anyway).
		279
		280	The default loop is the only loop that can handle C<ev_signal> and
		281	C<ev_child> watchers, and to do this, it always registers a handler
		282	for C<SIGCHLD>. If this is a problem for your app you can either
		283	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		284	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		285	C<ev_default_init>.
264		286
265	The flags argument can be used to specify special behaviour or specific	287	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	288	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		289
268	The following flags are supported:	290	The following flags are supported:
…		…
290	enabling this flag.	312	enabling this flag.
291		313
292	This works by calling C<getpid ()> on every iteration of the loop,	314	This works by calling C<getpid ()> on every iteration of the loop,
293	and thus this might slow down your event loop if you do a lot of loop	315	and thus this might slow down your event loop if you do a lot of loop
294	iterations and little real work, but is usually not noticeable (on my	316	iterations and little real work, but is usually not noticeable (on my
295	Linux system for example, C<getpid> is actually a simple 5-insn sequence	317	GNU/Linux system for example, C<getpid> is actually a simple 5-insn sequence
296	without a syscall and thus I<very> fast, but my Linux system also has	318	without a syscall and thus I<very> fast, but my GNU/Linux system also has
297	C<pthread_atfork> which is even faster).	319	C<pthread_atfork> which is even faster).
298		320
299	The big advantage of this flag is that you can forget about fork (and	321	The big advantage of this flag is that you can forget about fork (and
300	forget about forgetting to tell libev about forking) when you use this	322	forget about forgetting to tell libev about forking) when you use this
301	flag.	323	flag.
…		…
306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	328	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
307		329
308	This is your standard select(2) backend. Not I<completely> standard, as	330	This is your standard select(2) backend. Not I<completely> standard, as
309	libev tries to roll its own fd_set with no limits on the number of fds,	331	libev tries to roll its own fd_set with no limits on the number of fds,
310	but if that fails, expect a fairly low limit on the number of fds when	332	but if that fails, expect a fairly low limit on the number of fds when
311	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	333	using this backend. It doesn't scale too well (O(highest_fd)), but its
312	the fastest backend for a low number of fds.	334	usually the fastest backend for a low number of (low-numbered :) fds.
		335
		336	To get good performance out of this backend you need a high amount of
		337	parallelity (most of the file descriptors should be busy). If you are
		338	writing a server, you should C<accept ()> in a loop to accept as many
		339	connections as possible during one iteration. You might also want to have
		340	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		341	readiness notifications you get per iteration.
313		342
314	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	343	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
315		344
316	And this is your standard poll(2) backend. It's more complicated than	345	And this is your standard poll(2) backend. It's more complicated
317	select, but handles sparse fds better and has no artificial limit on the	346	than select, but handles sparse fds better and has no artificial
318	number of fds you can use (except it will slow down considerably with a	347	limit on the number of fds you can use (except it will slow down
319	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	348	considerably with a lot of inactive fds). It scales similarly to select,
		349	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		350	performance tips.
320		351
321	=item C<EVBACKEND_EPOLL> (value 4, Linux)	352	=item C<EVBACKEND_EPOLL> (value 4, Linux)
322		353
323	For few fds, this backend is a bit little slower than poll and select,	354	For few fds, this backend is a bit little slower than poll and select,
324	but it scales phenomenally better. While poll and select usually scale	355	but it scales phenomenally better. While poll and select usually scale
325	like O(total_fds) where n is the total number of fds (or the highest fd),	356	like O(total_fds) where n is the total number of fds (or the highest fd),
326	epoll scales either O(1) or O(active_fds). The epoll design has a number	357	epoll scales either O(1) or O(active_fds). The epoll design has a number
327	of shortcomings, such as silently dropping events in some hard-to-detect	358	of shortcomings, such as silently dropping events in some hard-to-detect
328	cases and rewiring a syscall per fd change, no fork support and bad	359	cases and requiring a syscall per fd change, no fork support and bad
329	support for dup:	360	support for dup.
330		361
331	While stopping, setting and starting an I/O watcher in the same iteration	362	While stopping, setting and starting an I/O watcher in the same iteration
332	will result in some caching, there is still a syscall per such incident	363	will result in some caching, there is still a syscall per such incident
333	(because the fd could point to a different file description now), so its	364	(because the fd could point to a different file description now), so its
334	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	365	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
…		…
336		367
337	Please note that epoll sometimes generates spurious notifications, so you	368	Please note that epoll sometimes generates spurious notifications, so you
338	need to use non-blocking I/O or other means to avoid blocking when no data	369	need to use non-blocking I/O or other means to avoid blocking when no data
339	(or space) is available.	370	(or space) is available.
340		371
		372	Best performance from this backend is achieved by not unregistering all
		373	watchers for a file descriptor until it has been closed, if possible, i.e.
		374	keep at least one watcher active per fd at all times.
		375
		376	While nominally embeddeble in other event loops, this feature is broken in
		377	all kernel versions tested so far.
		378
341	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	379	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
342		380
343	Kqueue deserves special mention, as at the time of this writing, it	381	Kqueue deserves special mention, as at the time of this writing, it
344	was broken on I<all> BSDs (usually it doesn't work with anything but	382	was broken on all BSDs except NetBSD (usually it doesn't work reliably
345	sockets and pipes, except on Darwin, where of course it's completely	383	with anything but sockets and pipes, except on Darwin, where of course
346	useless. On NetBSD, it seems to work for all the FD types I tested, so it
347	is used by default there). For this reason it's not being "autodetected"	384	it's completely useless). For this reason it's not being "autodetected"
348	unless you explicitly specify it explicitly in the flags (i.e. using	385	unless you explicitly specify it explicitly in the flags (i.e. using
349	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	386	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
350	system like NetBSD.	387	system like NetBSD.
351		388
		389	You still can embed kqueue into a normal poll or select backend and use it
		390	only for sockets (after having made sure that sockets work with kqueue on
		391	the target platform). See C<ev_embed> watchers for more info.
		392
352	It scales in the same way as the epoll backend, but the interface to the	393	It scales in the same way as the epoll backend, but the interface to the
353	kernel is more efficient (which says nothing about its actual speed,	394	kernel is more efficient (which says nothing about its actual speed, of
354	of course). While stopping, setting and starting an I/O watcher does	395	course). While stopping, setting and starting an I/O watcher does never
355	never cause an extra syscall as with epoll, it still adds up to two event	396	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
356	changes per incident, support for C<fork ()> is very bad and it drops fds	397	two event changes per incident, support for C<fork ()> is very bad and it
357	silently in similarly hard-to-detetc cases.	398	drops fds silently in similarly hard-to-detect cases.
		399
		400	This backend usually performs well under most conditions.
		401
		402	While nominally embeddable in other event loops, this doesn't work
		403	everywhere, so you might need to test for this. And since it is broken
		404	almost everywhere, you should only use it when you have a lot of sockets
		405	(for which it usually works), by embedding it into another event loop
		406	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		407	sockets.
358		408
359	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	409	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
360		410
361	This is not implemented yet (and might never be).	411	This is not implemented yet (and might never be, unless you send me an
		412	implementation). According to reports, C</dev/poll> only supports sockets
		413	and is not embeddable, which would limit the usefulness of this backend
		414	immensely.
362		415
363	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	416	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
364		417
365	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	418	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
366	it's really slow, but it still scales very well (O(active_fds)).	419	it's really slow, but it still scales very well (O(active_fds)).
367		420
368	Please note that solaris event ports can deliver a lot of spurious	421	Please note that solaris event ports can deliver a lot of spurious
369	notifications, so you need to use non-blocking I/O or other means to avoid	422	notifications, so you need to use non-blocking I/O or other means to avoid
370	blocking when no data (or space) is available.	423	blocking when no data (or space) is available.
371		424
		425	While this backend scales well, it requires one system call per active
		426	file descriptor per loop iteration. For small and medium numbers of file
		427	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		428	might perform better.
		429
		430	On the positive side, ignoring the spurious readiness notifications, this
		431	backend actually performed to specification in all tests and is fully
		432	embeddable, which is a rare feat among the OS-specific backends.
		433
372	=item C<EVBACKEND_ALL>	434	=item C<EVBACKEND_ALL>
373		435
374	Try all backends (even potentially broken ones that wouldn't be tried	436	Try all backends (even potentially broken ones that wouldn't be tried
375	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	437	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
376	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	438	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
377		439
		440	It is definitely not recommended to use this flag.
		441
378	=back	442	=back
379		443
380	If one or more of these are ored into the flags value, then only these	444	If one or more of these are ored into the flags value, then only these
381	backends will be tried (in the reverse order as given here). If none are	445	backends will be tried (in the reverse order as listed here). If none are
382	specified, most compiled-in backend will be tried, usually in reverse	446	specified, all backends in C<ev_recommended_backends ()> will be tried.
383	order of their flag values :)
384		447
385	The most typical usage is like this:	448	The most typical usage is like this:
386		449
387	if (!ev_default_loop (0))	450	if (!ev_default_loop (0))
388	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	451	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
402		465
403	Similar to C<ev_default_loop>, but always creates a new event loop that is	466	Similar to C<ev_default_loop>, but always creates a new event loop that is
404	always distinct from the default loop. Unlike the default loop, it cannot	467	always distinct from the default loop. Unlike the default loop, it cannot
405	handle signal and child watchers, and attempts to do so will be greeted by	468	handle signal and child watchers, and attempts to do so will be greeted by
406	undefined behaviour (or a failed assertion if assertions are enabled).	469	undefined behaviour (or a failed assertion if assertions are enabled).
		470
		471	Note that this function I<is> thread-safe, and the recommended way to use
		472	libev with threads is indeed to create one loop per thread, and using the
		473	default loop in the "main" or "initial" thread.
407		474
408	Example: Try to create a event loop that uses epoll and nothing else.	475	Example: Try to create a event loop that uses epoll and nothing else.
409		476
410	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);	477	struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
411	if (!epoller)	478	if (!epoller)
…		…
435	Like C<ev_default_destroy>, but destroys an event loop created by an	502	Like C<ev_default_destroy>, but destroys an event loop created by an
436	earlier call to C<ev_loop_new>.	503	earlier call to C<ev_loop_new>.
437		504
438	=item ev_default_fork ()	505	=item ev_default_fork ()
439		506
		507	This function sets a flag that causes subsequent C<ev_loop> iterations
440	This function reinitialises the kernel state for backends that have	508	to reinitialise the kernel state for backends that have one. Despite the
441	one. Despite the name, you can call it anytime, but it makes most sense	509	name, you can call it anytime, but it makes most sense after forking, in
442	after forking, in either the parent or child process (or both, but that	510	the child process (or both child and parent, but that again makes little
443	again makes little sense).	511	sense). You I<must> call it in the child before using any of the libev
		512	functions, and it will only take effect at the next C<ev_loop> iteration.
444		513
445	You I<must> call this function in the child process after forking if and	514	On the other hand, you only need to call this function in the child
446	only if you want to use the event library in both processes. If you just	515	process if and only if you want to use the event library in the child. If
447	fork+exec, you don't have to call it.	516	you just fork+exec, you don't have to call it at all.
448		517
449	The function itself is quite fast and it's usually not a problem to call	518	The function itself is quite fast and it's usually not a problem to call
450	it just in case after a fork. To make this easy, the function will fit in	519	it just in case after a fork. To make this easy, the function will fit in
451	quite nicely into a call to C<pthread_atfork>:	520	quite nicely into a call to C<pthread_atfork>:
452		521
453	pthread_atfork (0, 0, ev_default_fork);	522	pthread_atfork (0, 0, ev_default_fork);
454		523
455	At the moment, C<EVBACKEND_SELECT> and C<EVBACKEND_POLL> are safe to use
456	without calling this function, so if you force one of those backends you
457	do not need to care.
458
459	=item ev_loop_fork (loop)	524	=item ev_loop_fork (loop)
460		525
461	Like C<ev_default_fork>, but acts on an event loop created by	526	Like C<ev_default_fork>, but acts on an event loop created by
462	C<ev_loop_new>. Yes, you have to call this on every allocated event loop	527	C<ev_loop_new>. Yes, you have to call this on every allocated event loop
463	after fork, and how you do this is entirely your own problem.	528	after fork, and how you do this is entirely your own problem.
		529
		530	=item int ev_is_default_loop (loop)
		531
		532	Returns true when the given loop actually is the default loop, false otherwise.
464		533
465	=item unsigned int ev_loop_count (loop)	534	=item unsigned int ev_loop_count (loop)
466		535
467	Returns the count of loop iterations for the loop, which is identical to	536	Returns the count of loop iterations for the loop, which is identical to
468	the number of times libev did poll for new events. It starts at C<0> and	537	the number of times libev did poll for new events. It starts at C<0> and
…		…
513	usually a better approach for this kind of thing.	582	usually a better approach for this kind of thing.
514		583
515	Here are the gory details of what C<ev_loop> does:	584	Here are the gory details of what C<ev_loop> does:
516		585
517	- Before the first iteration, call any pending watchers.	586	- Before the first iteration, call any pending watchers.
518	* If there are no active watchers (reference count is zero), return.	587	* If EVFLAG_FORKCHECK was used, check for a fork.
519	- Queue all prepare watchers and then call all outstanding watchers.	588	- If a fork was detected, queue and call all fork watchers.
		589	- Queue and call all prepare watchers.
520	- If we have been forked, recreate the kernel state.	590	- If we have been forked, recreate the kernel state.
521	- Update the kernel state with all outstanding changes.	591	- Update the kernel state with all outstanding changes.
522	- Update the "event loop time".	592	- Update the "event loop time".
523	- Calculate for how long to block.	593	- Calculate for how long to sleep or block, if at all
		594	(active idle watchers, EVLOOP_NONBLOCK or not having
		595	any active watchers at all will result in not sleeping).
		596	- Sleep if the I/O and timer collect interval say so.
524	- Block the process, waiting for any events.	597	- Block the process, waiting for any events.
525	- Queue all outstanding I/O (fd) events.	598	- Queue all outstanding I/O (fd) events.
526	- Update the "event loop time" and do time jump handling.	599	- Update the "event loop time" and do time jump handling.
527	- Queue all outstanding timers.	600	- Queue all outstanding timers.
528	- Queue all outstanding periodics.	601	- Queue all outstanding periodics.
529	- If no events are pending now, queue all idle watchers.	602	- If no events are pending now, queue all idle watchers.
530	- Queue all check watchers.	603	- Queue all check watchers.
531	- Call all queued watchers in reverse order (i.e. check watchers first).	604	- Call all queued watchers in reverse order (i.e. check watchers first).
532	Signals and child watchers are implemented as I/O watchers, and will	605	Signals and child watchers are implemented as I/O watchers, and will
533	be handled here by queueing them when their watcher gets executed.	606	be handled here by queueing them when their watcher gets executed.
534	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	607	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
535	were used, return, otherwise continue with step *.	608	were used, or there are no active watchers, return, otherwise
		609	continue with step *.
536		610
537	Example: Queue some jobs and then loop until no events are outsanding	611	Example: Queue some jobs and then loop until no events are outstanding
538	anymore.	612	anymore.
539		613
540	... queue jobs here, make sure they register event watchers as long	614	... queue jobs here, make sure they register event watchers as long
541	... as they still have work to do (even an idle watcher will do..)	615	... as they still have work to do (even an idle watcher will do..)
542	ev_loop (my_loop, 0);	616	ev_loop (my_loop, 0);
…		…
546		620
547	Can be used to make a call to C<ev_loop> return early (but only after it	621	Can be used to make a call to C<ev_loop> return early (but only after it
548	has processed all outstanding events). The C<how> argument must be either	622	has processed all outstanding events). The C<how> argument must be either
549	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	623	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
550	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	624	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		625
		626	This "unloop state" will be cleared when entering C<ev_loop> again.
551		627
552	=item ev_ref (loop)	628	=item ev_ref (loop)
553		629
554	=item ev_unref (loop)	630	=item ev_unref (loop)
555		631
…		…
560	returning, ev_unref() after starting, and ev_ref() before stopping it. For	636	returning, ev_unref() after starting, and ev_ref() before stopping it. For
561	example, libev itself uses this for its internal signal pipe: It is not	637	example, libev itself uses this for its internal signal pipe: It is not
562	visible to the libev user and should not keep C<ev_loop> from exiting if	638	visible to the libev user and should not keep C<ev_loop> from exiting if
563	no event watchers registered by it are active. It is also an excellent	639	no event watchers registered by it are active. It is also an excellent
564	way to do this for generic recurring timers or from within third-party	640	way to do this for generic recurring timers or from within third-party
565	libraries. Just remember to I<unref after start> and I<ref before stop>.	641	libraries. Just remember to I<unref after start> and I<ref before stop>
		642	(but only if the watcher wasn't active before, or was active before,
		643	respectively).
566		644
567	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	645	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
568	running when nothing else is active.	646	running when nothing else is active.
569		647
570	struct ev_signal exitsig;	648	struct ev_signal exitsig;
…		…
596	overhead for the actual polling but can deliver many events at once.	674	overhead for the actual polling but can deliver many events at once.
597		675
598	By setting a higher I<io collect interval> you allow libev to spend more	676	By setting a higher I<io collect interval> you allow libev to spend more
599	time collecting I/O events, so you can handle more events per iteration,	677	time collecting I/O events, so you can handle more events per iteration,
600	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	678	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
601	C<ev_timer>) will be not affected.	679	C<ev_timer>) will be not affected. Setting this to a non-null value will
		680	introduce an additional C<ev_sleep ()> call into most loop iterations.
602		681
603	Likewise, by setting a higher I<timeout collect interval> you allow libev	682	Likewise, by setting a higher I<timeout collect interval> you allow libev
604	to spend more time collecting timeouts, at the expense of increased	683	to spend more time collecting timeouts, at the expense of increased
605	latency (the watcher callback will be called later). C<ev_io> watchers	684	latency (the watcher callback will be called later). C<ev_io> watchers
606	will not be affected.	685	will not be affected. Setting this to a non-null value will not introduce
		686	any overhead in libev.
607		687
608	Many (busy) programs can usually benefit by setting the io collect	688	Many (busy) programs can usually benefit by setting the io collect
609	interval to a value near C<0.1> or so, which is often enough for	689	interval to a value near C<0.1> or so, which is often enough for
610	interactive servers (of course not for games), likewise for timeouts. It	690	interactive servers (of course not for games), likewise for timeouts. It
611	usually doesn't make much sense to set it to a lower value than C<0.01>,	691	usually doesn't make much sense to set it to a lower value than C<0.01>,
…		…
716		796
717	=item C<EV_FORK>	797	=item C<EV_FORK>
718		798
719	The event loop has been resumed in the child process after fork (see	799	The event loop has been resumed in the child process after fork (see
720	C<ev_fork>).	800	C<ev_fork>).
		801
		802	=item C<EV_ASYNC>
		803
		804	The given async watcher has been asynchronously notified (see C<ev_async>).
721		805
722	=item C<EV_ERROR>	806	=item C<EV_ERROR>
723		807
724	An unspecified error has occured, the watcher has been stopped. This might	808	An unspecified error has occured, the watcher has been stopped. This might
725	happen because the watcher could not be properly started because libev	809	happen because the watcher could not be properly started because libev
…		…
943	In general you can register as many read and/or write event watchers per	1027	In general you can register as many read and/or write event watchers per
944	fd as you want (as long as you don't confuse yourself). Setting all file	1028	fd as you want (as long as you don't confuse yourself). Setting all file
945	descriptors to non-blocking mode is also usually a good idea (but not	1029	descriptors to non-blocking mode is also usually a good idea (but not
946	required if you know what you are doing).	1030	required if you know what you are doing).
947		1031
948	You have to be careful with dup'ed file descriptors, though. Some backends
949	(the linux epoll backend is a notable example) cannot handle dup'ed file
950	descriptors correctly if you register interest in two or more fds pointing
951	to the same underlying file/socket/etc. description (that is, they share
952	the same underlying "file open").
953
954	If you must do this, then force the use of a known-to-be-good backend	1032	If you must do this, then force the use of a known-to-be-good backend
955	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1033	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
956	C<EVBACKEND_POLL>).	1034	C<EVBACKEND_POLL>).
957		1035
958	Another thing you have to watch out for is that it is quite easy to	1036	Another thing you have to watch out for is that it is quite easy to
959	receive "spurious" readyness notifications, that is your callback might	1037	receive "spurious" readiness notifications, that is your callback might
960	be called with C<EV_READ> but a subsequent C<read>(2) will actually block	1038	be called with C<EV_READ> but a subsequent C<read>(2) will actually block
961	because there is no data. Not only are some backends known to create a	1039	because there is no data. Not only are some backends known to create a
962	lot of those (for example solaris ports), it is very easy to get into	1040	lot of those (for example solaris ports), it is very easy to get into
963	this situation even with a relatively standard program structure. Thus	1041	this situation even with a relatively standard program structure. Thus
964	it is best to always use non-blocking I/O: An extra C<read>(2) returning	1042	it is best to always use non-blocking I/O: An extra C<read>(2) returning
…		…
992	optimisations to libev.	1070	optimisations to libev.
993		1071
994	=head3 The special problem of dup'ed file descriptors	1072	=head3 The special problem of dup'ed file descriptors
995		1073
996	Some backends (e.g. epoll), cannot register events for file descriptors,	1074	Some backends (e.g. epoll), cannot register events for file descriptors,
997	but only events for the underlying file descriptions. That menas when you	1075	but only events for the underlying file descriptions. That means when you
998	have C<dup ()>'ed file descriptors and register events for them, only one	1076	have C<dup ()>'ed file descriptors or weirder constellations, and register
999	file descriptor might actually receive events.	1077	events for them, only one file descriptor might actually receive events.
1000		1078
1001	There is no workaorund possible except not registering events	1079	There is no workaround possible except not registering events
1002	for potentially C<dup ()>'ed file descriptors or to resort to	1080	for potentially C<dup ()>'ed file descriptors, or to resort to
1003	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1081	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1004		1082
1005	=head3 The special problem of fork	1083	=head3 The special problem of fork
1006		1084
1007	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1085	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
…		…
1011	To support fork in your programs, you either have to call	1089	To support fork in your programs, you either have to call
1012	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,	1090	C<ev_default_fork ()> or C<ev_loop_fork ()> after a fork in the child,
1013	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or	1091	enable C<EVFLAG_FORKCHECK>, or resort to C<EVBACKEND_SELECT> or
1014	C<EVBACKEND_POLL>.	1092	C<EVBACKEND_POLL>.
1015		1093
		1094	=head3 The special problem of SIGPIPE
		1095
		1096	While not really specific to libev, it is easy to forget about SIGPIPE:
		1097	when reading from a pipe whose other end has been closed, your program
		1098	gets send a SIGPIPE, which, by default, aborts your program. For most
		1099	programs this is sensible behaviour, for daemons, this is usually
		1100	undesirable.
		1101
		1102	So when you encounter spurious, unexplained daemon exits, make sure you
		1103	ignore SIGPIPE (and maybe make sure you log the exit status of your daemon
		1104	somewhere, as that would have given you a big clue).
		1105
1016		1106
1017	=head3 Watcher-Specific Functions	1107	=head3 Watcher-Specific Functions
1018		1108
1019	=over 4	1109	=over 4
1020		1110
…		…
1033	=item int events [read-only]	1123	=item int events [read-only]
1034		1124
1035	The events being watched.	1125	The events being watched.
1036		1126
1037	=back	1127	=back
		1128
		1129	=head3 Examples
1038		1130
1039	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1131	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1040	readable, but only once. Since it is likely line-buffered, you could	1132	readable, but only once. Since it is likely line-buffered, you could
1041	attempt to read a whole line in the callback.	1133	attempt to read a whole line in the callback.
1042		1134
…		…
1095	configure a timer to trigger every 10 seconds, then it will trigger at	1187	configure a timer to trigger every 10 seconds, then it will trigger at
1096	exactly 10 second intervals. If, however, your program cannot keep up with	1188	exactly 10 second intervals. If, however, your program cannot keep up with
1097	the timer (because it takes longer than those 10 seconds to do stuff) the	1189	the timer (because it takes longer than those 10 seconds to do stuff) the
1098	timer will not fire more than once per event loop iteration.	1190	timer will not fire more than once per event loop iteration.
1099		1191
1100	=item ev_timer_again (loop)	1192	=item ev_timer_again (loop, ev_timer *)
1101		1193
1102	This will act as if the timer timed out and restart it again if it is	1194	This will act as if the timer timed out and restart it again if it is
1103	repeating. The exact semantics are:	1195	repeating. The exact semantics are:
1104		1196
1105	If the timer is pending, its pending status is cleared.	1197	If the timer is pending, its pending status is cleared.
…		…
1140	or C<ev_timer_again> is called and determines the next timeout (if any),	1232	or C<ev_timer_again> is called and determines the next timeout (if any),
1141	which is also when any modifications are taken into account.	1233	which is also when any modifications are taken into account.
1142		1234
1143	=back	1235	=back
1144		1236
		1237	=head3 Examples
		1238
1145	Example: Create a timer that fires after 60 seconds.	1239	Example: Create a timer that fires after 60 seconds.
1146		1240
1147	static void	1241	static void
1148	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)	1242	one_minute_cb (struct ev_loop *loop, struct ev_timer *w, int revents)
1149	{	1243	{
…		…
1212	In this configuration the watcher triggers an event at the wallclock time	1306	In this configuration the watcher triggers an event at the wallclock time
1213	C<at> and doesn't repeat. It will not adjust when a time jump occurs,	1307	C<at> and doesn't repeat. It will not adjust when a time jump occurs,
1214	that is, if it is to be run at January 1st 2011 then it will run when the	1308	that is, if it is to be run at January 1st 2011 then it will run when the
1215	system time reaches or surpasses this time.	1309	system time reaches or surpasses this time.
1216		1310
1217	=item * non-repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)	1311	=item * repeating interval timer (at = offset, interval > 0, reschedule_cb = 0)
1218		1312
1219	In this mode the watcher will always be scheduled to time out at the next	1313	In this mode the watcher will always be scheduled to time out at the next
1220	C<at + N * interval> time (for some integer N, which can also be negative)	1314	C<at + N * interval> time (for some integer N, which can also be negative)
1221	and then repeat, regardless of any time jumps.	1315	and then repeat, regardless of any time jumps.
1222		1316
…		…
1279	Simply stops and restarts the periodic watcher again. This is only useful	1373	Simply stops and restarts the periodic watcher again. This is only useful
1280	when you changed some parameters or the reschedule callback would return	1374	when you changed some parameters or the reschedule callback would return
1281	a different time than the last time it was called (e.g. in a crond like	1375	a different time than the last time it was called (e.g. in a crond like
1282	program when the crontabs have changed).	1376	program when the crontabs have changed).
1283		1377
		1378	=item ev_tstamp ev_periodic_at (ev_periodic *)
		1379
		1380	When active, returns the absolute time that the watcher is supposed to
		1381	trigger next.
		1382
1284	=item ev_tstamp offset [read-write]	1383	=item ev_tstamp offset [read-write]
1285		1384
1286	When repeating, this contains the offset value, otherwise this is the	1385	When repeating, this contains the offset value, otherwise this is the
1287	absolute point in time (the C<at> value passed to C<ev_periodic_set>).	1386	absolute point in time (the C<at> value passed to C<ev_periodic_set>).
1288		1387
…		…
1299		1398
1300	The current reschedule callback, or C<0>, if this functionality is	1399	The current reschedule callback, or C<0>, if this functionality is
1301	switched off. Can be changed any time, but changes only take effect when	1400	switched off. Can be changed any time, but changes only take effect when
1302	the periodic timer fires or C<ev_periodic_again> is being called.	1401	the periodic timer fires or C<ev_periodic_again> is being called.
1303		1402
1304	=item ev_tstamp at [read-only]
1305
1306	When active, contains the absolute time that the watcher is supposed to
1307	trigger next.
1308
1309	=back	1403	=back
		1404
		1405	=head3 Examples
1310		1406
1311	Example: Call a callback every hour, or, more precisely, whenever the	1407	Example: Call a callback every hour, or, more precisely, whenever the
1312	system clock is divisible by 3600. The callback invocation times have	1408	system clock is divisible by 3600. The callback invocation times have
1313	potentially a lot of jittering, but good long-term stability.	1409	potentially a lot of jittering, but good long-term stability.
1314		1410
…		…
1354	with the kernel (thus it coexists with your own signal handlers as long	1450	with the kernel (thus it coexists with your own signal handlers as long
1355	as you don't register any with libev). Similarly, when the last signal	1451	as you don't register any with libev). Similarly, when the last signal
1356	watcher for a signal is stopped libev will reset the signal handler to	1452	watcher for a signal is stopped libev will reset the signal handler to
1357	SIG_DFL (regardless of what it was set to before).	1453	SIG_DFL (regardless of what it was set to before).
1358		1454
		1455	If possible and supported, libev will install its handlers with
		1456	C<SA_RESTART> behaviour enabled, so syscalls should not be unduly
		1457	interrupted. If you have a problem with syscalls getting interrupted by
		1458	signals you can block all signals in an C<ev_check> watcher and unblock
		1459	them in an C<ev_prepare> watcher.
		1460
1359	=head3 Watcher-Specific Functions and Data Members	1461	=head3 Watcher-Specific Functions and Data Members
1360		1462
1361	=over 4	1463	=over 4
1362		1464
1363	=item ev_signal_init (ev_signal *, callback, int signum)	1465	=item ev_signal_init (ev_signal *, callback, int signum)
…		…
1371		1473
1372	The signal the watcher watches out for.	1474	The signal the watcher watches out for.
1373		1475
1374	=back	1476	=back
1375		1477
		1478	=head3 Examples
		1479
		1480	Example: Try to exit cleanly on SIGINT and SIGTERM.
		1481
		1482	static void
		1483	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)
		1484	{
		1485	ev_unloop (loop, EVUNLOOP_ALL);
		1486	}
		1487
		1488	struct ev_signal signal_watcher;
		1489	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
		1490	ev_signal_start (loop, &sigint_cb);
		1491
1376		1492
1377	=head2 C<ev_child> - watch out for process status changes	1493	=head2 C<ev_child> - watch out for process status changes
1378		1494
1379	Child watchers trigger when your process receives a SIGCHLD in response to	1495	Child watchers trigger when your process receives a SIGCHLD in response to
1380	some child status changes (most typically when a child of yours dies).	1496	some child status changes (most typically when a child of yours dies). It
		1497	is permissible to install a child watcher I<after> the child has been
		1498	forked (which implies it might have already exited), as long as the event
		1499	loop isn't entered (or is continued from a watcher).
		1500
		1501	Only the default event loop is capable of handling signals, and therefore
		1502	you can only rgeister child watchers in the default event loop.
		1503
		1504	=head3 Process Interaction
		1505
		1506	Libev grabs C<SIGCHLD> as soon as the default event loop is
		1507	initialised. This is necessary to guarantee proper behaviour even if
		1508	the first child watcher is started after the child exits. The occurance
		1509	of C<SIGCHLD> is recorded asynchronously, but child reaping is done
		1510	synchronously as part of the event loop processing. Libev always reaps all
		1511	children, even ones not watched.
		1512
		1513	=head3 Overriding the Built-In Processing
		1514
		1515	Libev offers no special support for overriding the built-in child
		1516	processing, but if your application collides with libev's default child
		1517	handler, you can override it easily by installing your own handler for
		1518	C<SIGCHLD> after initialising the default loop, and making sure the
		1519	default loop never gets destroyed. You are encouraged, however, to use an
		1520	event-based approach to child reaping and thus use libev's support for
		1521	that, so other libev users can use C<ev_child> watchers freely.
1381		1522
1382	=head3 Watcher-Specific Functions and Data Members	1523	=head3 Watcher-Specific Functions and Data Members
1383		1524
1384	=over 4	1525	=over 4
1385		1526
1386	=item ev_child_init (ev_child *, callback, int pid)	1527	=item ev_child_init (ev_child *, callback, int pid, int trace)
1387		1528
1388	=item ev_child_set (ev_child *, int pid)	1529	=item ev_child_set (ev_child *, int pid, int trace)
1389		1530
1390	Configures the watcher to wait for status changes of process C<pid> (or	1531	Configures the watcher to wait for status changes of process C<pid> (or
1391	I<any> process if C<pid> is specified as C<0>). The callback can look	1532	I<any> process if C<pid> is specified as C<0>). The callback can look
1392	at the C<rstatus> member of the C<ev_child> watcher structure to see	1533	at the C<rstatus> member of the C<ev_child> watcher structure to see
1393	the status word (use the macros from C<sys/wait.h> and see your systems	1534	the status word (use the macros from C<sys/wait.h> and see your systems
1394	C<waitpid> documentation). The C<rpid> member contains the pid of the	1535	C<waitpid> documentation). The C<rpid> member contains the pid of the
1395	process causing the status change.	1536	process causing the status change. C<trace> must be either C<0> (only
		1537	activate the watcher when the process terminates) or C<1> (additionally
		1538	activate the watcher when the process is stopped or continued).
1396		1539
1397	=item int pid [read-only]	1540	=item int pid [read-only]
1398		1541
1399	The process id this watcher watches out for, or C<0>, meaning any process id.	1542	The process id this watcher watches out for, or C<0>, meaning any process id.
1400		1543
…		…
1407	The process exit/trace status caused by C<rpid> (see your systems	1550	The process exit/trace status caused by C<rpid> (see your systems
1408	C<waitpid> and C<sys/wait.h> documentation for details).	1551	C<waitpid> and C<sys/wait.h> documentation for details).
1409		1552
1410	=back	1553	=back
1411		1554
1412	Example: Try to exit cleanly on SIGINT and SIGTERM.	1555	=head3 Examples
		1556
		1557	Example: C<fork()> a new process and install a child handler to wait for
		1558	its completion.
		1559
		1560	ev_child cw;
1413		1561
1414	static void	1562	static void
1415	sigint_cb (struct ev_loop *loop, struct ev_signal *w, int revents)	1563	child_cb (EV_P_ struct ev_child *w, int revents)
1416	{	1564	{
1417	ev_unloop (loop, EVUNLOOP_ALL);	1565	ev_child_stop (EV_A_ w);
		1566	printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
1418	}	1567	}
1419		1568
1420	struct ev_signal signal_watcher;	1569	pid_t pid = fork ();
1421	ev_signal_init (&signal_watcher, sigint_cb, SIGINT);	1570
1422	ev_signal_start (loop, &sigint_cb);	1571	if (pid < 0)
		1572	// error
		1573	else if (pid == 0)
		1574	{
		1575	// the forked child executes here
		1576	exit (1);
		1577	}
		1578	else
		1579	{
		1580	ev_child_init (&cw, child_cb, pid, 0);
		1581	ev_child_start (EV_DEFAULT_ &cw);
		1582	}
1423		1583
1424		1584
1425	=head2 C<ev_stat> - did the file attributes just change?	1585	=head2 C<ev_stat> - did the file attributes just change?
1426		1586
1427	This watches a filesystem path for attribute changes. That is, it calls	1587	This watches a filesystem path for attribute changes. That is, it calls
…		…
1450	as even with OS-supported change notifications, this can be	1610	as even with OS-supported change notifications, this can be
1451	resource-intensive.	1611	resource-intensive.
1452		1612
1453	At the time of this writing, only the Linux inotify interface is	1613	At the time of this writing, only the Linux inotify interface is
1454	implemented (implementing kqueue support is left as an exercise for the	1614	implemented (implementing kqueue support is left as an exercise for the
		1615	reader, note, however, that the author sees no way of implementing ev_stat
1455	reader). Inotify will be used to give hints only and should not change the	1616	semantics with kqueue). Inotify will be used to give hints only and should
1456	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1617	not change the semantics of C<ev_stat> watchers, which means that libev
1457	to fall back to regular polling again even with inotify, but changes are	1618	sometimes needs to fall back to regular polling again even with inotify,
1458	usually detected immediately, and if the file exists there will be no	1619	but changes are usually detected immediately, and if the file exists there
1459	polling.	1620	will be no polling.
		1621
		1622	=head3 ABI Issues (Largefile Support)
		1623
		1624	Libev by default (unless the user overrides this) uses the default
		1625	compilation environment, which means that on systems with optionally
		1626	disabled large file support, you get the 32 bit version of the stat
		1627	structure. When using the library from programs that change the ABI to
		1628	use 64 bit file offsets the programs will fail. In that case you have to
		1629	compile libev with the same flags to get binary compatibility. This is
		1630	obviously the case with any flags that change the ABI, but the problem is
		1631	most noticably with ev_stat and largefile support.
		1632
		1633	=head3 Inotify
		1634
		1635	When C<inotify (7)> support has been compiled into libev (generally only
		1636	available on Linux) and present at runtime, it will be used to speed up
		1637	change detection where possible. The inotify descriptor will be created lazily
		1638	when the first C<ev_stat> watcher is being started.
		1639
		1640	Inotify presence does not change the semantics of C<ev_stat> watchers
		1641	except that changes might be detected earlier, and in some cases, to avoid
		1642	making regular C<stat> calls. Even in the presence of inotify support
		1643	there are many cases where libev has to resort to regular C<stat> polling.
		1644
		1645	(There is no support for kqueue, as apparently it cannot be used to
		1646	implement this functionality, due to the requirement of having a file
		1647	descriptor open on the object at all times).
		1648
		1649	=head3 The special problem of stat time resolution
		1650
		1651	The C<stat ()> syscall only supports full-second resolution portably, and
		1652	even on systems where the resolution is higher, many filesystems still
		1653	only support whole seconds.
		1654
		1655	That means that, if the time is the only thing that changes, you can
		1656	easily miss updates: on the first update, C<ev_stat> detects a change and
		1657	calls your callback, which does something. When there is another update
		1658	within the same second, C<ev_stat> will be unable to detect it as the stat
		1659	data does not change.
		1660
		1661	The solution to this is to delay acting on a change for slightly more
		1662	than a second (or till slightly after the next full second boundary), using
		1663	a roughly one-second-delay C<ev_timer> (e.g. C<ev_timer_set (w, 0., 1.02);
		1664	ev_timer_again (loop, w)>).
		1665
		1666	The C<.02> offset is added to work around small timing inconsistencies
		1667	of some operating systems (where the second counter of the current time
		1668	might be be delayed. One such system is the Linux kernel, where a call to
		1669	C<gettimeofday> might return a timestamp with a full second later than
		1670	a subsequent C<time> call - if the equivalent of C<time ()> is used to
		1671	update file times then there will be a small window where the kernel uses
		1672	the previous second to update file times but libev might already execute
		1673	the timer callback).
1460		1674
1461	=head3 Watcher-Specific Functions and Data Members	1675	=head3 Watcher-Specific Functions and Data Members
1462		1676
1463	=over 4	1677	=over 4
1464		1678
…		…
1470	C<path>. The C<interval> is a hint on how quickly a change is expected to	1684	C<path>. The C<interval> is a hint on how quickly a change is expected to
1471	be detected and should normally be specified as C<0> to let libev choose	1685	be detected and should normally be specified as C<0> to let libev choose
1472	a suitable value. The memory pointed to by C<path> must point to the same	1686	a suitable value. The memory pointed to by C<path> must point to the same
1473	path for as long as the watcher is active.	1687	path for as long as the watcher is active.
1474		1688
1475	The callback will be receive C<EV_STAT> when a change was detected,	1689	The callback will receive C<EV_STAT> when a change was detected, relative
1476	relative to the attributes at the time the watcher was started (or the	1690	to the attributes at the time the watcher was started (or the last change
1477	last change was detected).	1691	was detected).
1478		1692
1479	=item ev_stat_stat (ev_stat *)	1693	=item ev_stat_stat (loop, ev_stat *)
1480		1694
1481	Updates the stat buffer immediately with new values. If you change the	1695	Updates the stat buffer immediately with new values. If you change the
1482	watched path in your callback, you could call this fucntion to avoid	1696	watched path in your callback, you could call this function to avoid
1483	detecting this change (while introducing a race condition). Can also be	1697	detecting this change (while introducing a race condition if you are not
1484	useful simply to find out the new values.	1698	the only one changing the path). Can also be useful simply to find out the
		1699	new values.
1485		1700
1486	=item ev_statdata attr [read-only]	1701	=item ev_statdata attr [read-only]
1487		1702
1488	The most-recently detected attributes of the file. Although the type is of	1703	The most-recently detected attributes of the file. Although the type is
1489	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types	1704	C<ev_statdata>, this is usually the (or one of the) C<struct stat> types
1490	suitable for your system. If the C<st_nlink> member is C<0>, then there	1705	suitable for your system, but you can only rely on the POSIX-standardised
		1706	members to be present. If the C<st_nlink> member is C<0>, then there was
1491	was some error while C<stat>ing the file.	1707	some error while C<stat>ing the file.
1492		1708
1493	=item ev_statdata prev [read-only]	1709	=item ev_statdata prev [read-only]
1494		1710
1495	The previous attributes of the file. The callback gets invoked whenever	1711	The previous attributes of the file. The callback gets invoked whenever
1496	C<prev> != C<attr>.	1712	C<prev> != C<attr>, or, more precisely, one or more of these members
		1713	differ: C<st_dev>, C<st_ino>, C<st_mode>, C<st_nlink>, C<st_uid>,
		1714	C<st_gid>, C<st_rdev>, C<st_size>, C<st_atime>, C<st_mtime>, C<st_ctime>.
1497		1715
1498	=item ev_tstamp interval [read-only]	1716	=item ev_tstamp interval [read-only]
1499		1717
1500	The specified interval.	1718	The specified interval.
1501		1719
1502	=item const char *path [read-only]	1720	=item const char *path [read-only]
1503		1721
1504	The filesystem path that is being watched.	1722	The filesystem path that is being watched.
1505		1723
1506	=back	1724	=back
		1725
		1726	=head3 Examples
1507		1727
1508	Example: Watch C</etc/passwd> for attribute changes.	1728	Example: Watch C</etc/passwd> for attribute changes.
1509		1729
1510	static void	1730	static void
1511	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)	1731	passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
…		…
1524	}	1744	}
1525		1745
1526	...	1746	...
1527	ev_stat passwd;	1747	ev_stat passwd;
1528		1748
1529	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	1749	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1530	ev_stat_start (loop, &passwd);	1750	ev_stat_start (loop, &passwd);
		1751
		1752	Example: Like above, but additionally use a one-second delay so we do not
		1753	miss updates (however, frequent updates will delay processing, too, so
		1754	one might do the work both on C<ev_stat> callback invocation I<and> on
		1755	C<ev_timer> callback invocation).
		1756
		1757	static ev_stat passwd;
		1758	static ev_timer timer;
		1759
		1760	static void
		1761	timer_cb (EV_P_ ev_timer *w, int revents)
		1762	{
		1763	ev_timer_stop (EV_A_ w);
		1764
		1765	/* now it's one second after the most recent passwd change */
		1766	}
		1767
		1768	static void
		1769	stat_cb (EV_P_ ev_stat *w, int revents)
		1770	{
		1771	/* reset the one-second timer */
		1772	ev_timer_again (EV_A_ &timer);
		1773	}
		1774
		1775	...
		1776	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1777	ev_stat_start (loop, &passwd);
		1778	ev_timer_init (&timer, timer_cb, 0., 1.02);
1531		1779
1532		1780
1533	=head2 C<ev_idle> - when you've got nothing better to do...	1781	=head2 C<ev_idle> - when you've got nothing better to do...
1534		1782
1535	Idle watchers trigger events when no other events of the same or higher	1783	Idle watchers trigger events when no other events of the same or higher
…		…
1561	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1809	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1562	believe me.	1810	believe me.
1563		1811
1564	=back	1812	=back
1565		1813
		1814	=head3 Examples
		1815
1566	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1816	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1567	callback, free it. Also, use no error checking, as usual.	1817	callback, free it. Also, use no error checking, as usual.
1568		1818
1569	static void	1819	static void
1570	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)	1820	idle_cb (struct ev_loop *loop, struct ev_idle *w, int revents)
1571	{	1821	{
1572	free (w);	1822	free (w);
1573	// now do something you wanted to do when the program has	1823	// now do something you wanted to do when the program has
1574	// no longer asnything immediate to do.	1824	// no longer anything immediate to do.
1575	}	1825	}
1576		1826
1577	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));	1827	struct ev_idle *idle_watcher = malloc (sizeof (struct ev_idle));
1578	ev_idle_init (idle_watcher, idle_cb);	1828	ev_idle_init (idle_watcher, idle_cb);
1579	ev_idle_start (loop, idle_cb);	1829	ev_idle_start (loop, idle_cb);
…		…
1621		1871
1622	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1872	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1623	priority, to ensure that they are being run before any other watchers	1873	priority, to ensure that they are being run before any other watchers
1624	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1874	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1625	too) should not activate ("feed") events into libev. While libev fully	1875	too) should not activate ("feed") events into libev. While libev fully
1626	supports this, they will be called before other C<ev_check> watchers did	1876	supports this, they might get executed before other C<ev_check> watchers
1627	their job. As C<ev_check> watchers are often used to embed other event	1877	did their job. As C<ev_check> watchers are often used to embed other
1628	loops those other event loops might be in an unusable state until their	1878	(non-libev) event loops those other event loops might be in an unusable
1629	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	1879	state until their C<ev_check> watcher ran (always remind yourself to
1630	others).	1880	coexist peacefully with others).
1631		1881
1632	=head3 Watcher-Specific Functions and Data Members	1882	=head3 Watcher-Specific Functions and Data Members
1633		1883
1634	=over 4	1884	=over 4
1635		1885
…		…
1641	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1891	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1642	macros, but using them is utterly, utterly and completely pointless.	1892	macros, but using them is utterly, utterly and completely pointless.
1643		1893
1644	=back	1894	=back
1645		1895
		1896	=head3 Examples
		1897
1646	There are a number of principal ways to embed other event loops or modules	1898	There are a number of principal ways to embed other event loops or modules
1647	into libev. Here are some ideas on how to include libadns into libev	1899	into libev. Here are some ideas on how to include libadns into libev
1648	(there is a Perl module named C<EV::ADNS> that does this, which you could	1900	(there is a Perl module named C<EV::ADNS> that does this, which you could
1649	use for an actually working example. Another Perl module named C<EV::Glib>	1901	use as a working example. Another Perl module named C<EV::Glib> embeds a
1650	embeds a Glib main context into libev, and finally, C<Glib::EV> embeds EV	1902	Glib main context into libev, and finally, C<Glib::EV> embeds EV into the
1651	into the Glib event loop).	1903	Glib event loop).
1652		1904
1653	Method 1: Add IO watchers and a timeout watcher in a prepare handler,	1905	Method 1: Add IO watchers and a timeout watcher in a prepare handler,
1654	and in a check watcher, destroy them and call into libadns. What follows	1906	and in a check watcher, destroy them and call into libadns. What follows
1655	is pseudo-code only of course. This requires you to either use a low	1907	is pseudo-code only of course. This requires you to either use a low
1656	priority for the check watcher or use C<ev_clear_pending> explicitly, as	1908	priority for the check watcher or use C<ev_clear_pending> explicitly, as
…		…
1774	=head2 C<ev_embed> - when one backend isn't enough...	2026	=head2 C<ev_embed> - when one backend isn't enough...
1775		2027
1776	This is a rather advanced watcher type that lets you embed one event loop	2028	This is a rather advanced watcher type that lets you embed one event loop
1777	into another (currently only C<ev_io> events are supported in the embedded	2029	into another (currently only C<ev_io> events are supported in the embedded
1778	loop, other types of watchers might be handled in a delayed or incorrect	2030	loop, other types of watchers might be handled in a delayed or incorrect
1779	fashion and must not be used). (See portability notes, below).	2031	fashion and must not be used).
1780		2032
1781	There are primarily two reasons you would want that: work around bugs and	2033	There are primarily two reasons you would want that: work around bugs and
1782	prioritise I/O.	2034	prioritise I/O.
1783		2035
1784	As an example for a bug workaround, the kqueue backend might only support	2036	As an example for a bug workaround, the kqueue backend might only support
…		…
1818	portable one.	2070	portable one.
1819		2071
1820	So when you want to use this feature you will always have to be prepared	2072	So when you want to use this feature you will always have to be prepared
1821	that you cannot get an embeddable loop. The recommended way to get around	2073	that you cannot get an embeddable loop. The recommended way to get around
1822	this is to have a separate variables for your embeddable loop, try to	2074	this is to have a separate variables for your embeddable loop, try to
1823	create it, and if that fails, use the normal loop for everything:	2075	create it, and if that fails, use the normal loop for everything.
		2076
		2077	=head3 Watcher-Specific Functions and Data Members
		2078
		2079	=over 4
		2080
		2081	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
		2082
		2083	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)
		2084
		2085	Configures the watcher to embed the given loop, which must be
		2086	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		2087	invoked automatically, otherwise it is the responsibility of the callback
		2088	to invoke it (it will continue to be called until the sweep has been done,
		2089	if you do not want thta, you need to temporarily stop the embed watcher).
		2090
		2091	=item ev_embed_sweep (loop, ev_embed *)
		2092
		2093	Make a single, non-blocking sweep over the embedded loop. This works
		2094	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		2095	apropriate way for embedded loops.
		2096
		2097	=item struct ev_loop *other [read-only]
		2098
		2099	The embedded event loop.
		2100
		2101	=back
		2102
		2103	=head3 Examples
		2104
		2105	Example: Try to get an embeddable event loop and embed it into the default
		2106	event loop. If that is not possible, use the default loop. The default
		2107	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		2108	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		2109	used).
1824		2110
1825	struct ev_loop *loop_hi = ev_default_init (0);	2111	struct ev_loop *loop_hi = ev_default_init (0);
1826	struct ev_loop *loop_lo = 0;	2112	struct ev_loop *loop_lo = 0;
1827	struct ev_embed embed;	2113	struct ev_embed embed;
1828		2114
…		…
1839	ev_embed_start (loop_hi, &embed);	2125	ev_embed_start (loop_hi, &embed);
1840	}	2126	}
1841	else	2127	else
1842	loop_lo = loop_hi;	2128	loop_lo = loop_hi;
1843		2129
1844	=head2 Portability notes	2130	Example: Check if kqueue is available but not recommended and create
		2131	a kqueue backend for use with sockets (which usually work with any
		2132	kqueue implementation). Store the kqueue/socket-only event loop in
		2133	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1845		2134
1846	Kqueue is nominally embeddable, but this is broken on all BSDs that I	2135	struct ev_loop *loop = ev_default_init (0);
1847	tried, in various ways. Usually the embedded event loop will simply never	2136	struct ev_loop *loop_socket = 0;
1848	receive events, sometimes it will only trigger a few times, sometimes in a	2137	struct ev_embed embed;
1849	loop. Epoll is also nominally embeddable, but many Linux kernel versions	2138
1850	will always eport the epoll fd as ready, even when no events are pending.	2139	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2140	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2141	{
		2142	ev_embed_init (&embed, 0, loop_socket);
		2143	ev_embed_start (loop, &embed);
		2144	}
1851		2145
1852	While libev allows embedding these backends (they are contained in	2146	if (!loop_socket)
1853	C<ev_embeddable_backends ()>), take extreme care that it will actually	2147	loop_socket = loop;
1854	work.
1855		2148
1856	When in doubt, create a dynamic event loop forced to use sockets (this	2149	// now use loop_socket for all sockets, and loop for everything else
1857	usually works) and possibly another thread and a pipe or so to report to
1858	your main event loop.
1859
1860	=head3 Watcher-Specific Functions and Data Members
1861
1862	=over 4
1863
1864	=item ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
1865
1866	=item ev_embed_set (ev_embed *, callback, struct ev_loop *embedded_loop)
1867
1868	Configures the watcher to embed the given loop, which must be
1869	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1870	invoked automatically, otherwise it is the responsibility of the callback
1871	to invoke it (it will continue to be called until the sweep has been done,
1872	if you do not want thta, you need to temporarily stop the embed watcher).
1873
1874	=item ev_embed_sweep (loop, ev_embed *)
1875
1876	Make a single, non-blocking sweep over the embedded loop. This works
1877	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1878	apropriate way for embedded loops.
1879
1880	=item struct ev_loop *other [read-only]
1881
1882	The embedded event loop.
1883
1884	=back
1885		2150
1886		2151
1887	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2152	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1888		2153
1889	Fork watchers are called when a C<fork ()> was detected (usually because	2154	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
1905	believe me.	2170	believe me.
1906		2171
1907	=back	2172	=back
1908		2173
1909		2174
		2175	=head2 C<ev_async> - how to wake up another event loop
		2176
		2177	In general, you cannot use an C<ev_loop> from multiple threads or other
		2178	asynchronous sources such as signal handlers (as opposed to multiple event
		2179	loops - those are of course safe to use in different threads).
		2180
		2181	Sometimes, however, you need to wake up another event loop you do not
		2182	control, for example because it belongs to another thread. This is what
		2183	C<ev_async> watchers do: as long as the C<ev_async> watcher is active, you
		2184	can signal it by calling C<ev_async_send>, which is thread- and signal
		2185	safe.
		2186
		2187	This functionality is very similar to C<ev_signal> watchers, as signals,
		2188	too, are asynchronous in nature, and signals, too, will be compressed
		2189	(i.e. the number of callback invocations may be less than the number of
		2190	C<ev_async_sent> calls).
		2191
		2192	Unlike C<ev_signal> watchers, C<ev_async> works with any event loop, not
		2193	just the default loop.
		2194
		2195	=head3 Queueing
		2196
		2197	C<ev_async> does not support queueing of data in any way. The reason
		2198	is that the author does not know of a simple (or any) algorithm for a
		2199	multiple-writer-single-reader queue that works in all cases and doesn't
		2200	need elaborate support such as pthreads.
		2201
		2202	That means that if you want to queue data, you have to provide your own
		2203	queue. But at least I can tell you would implement locking around your
		2204	queue:
		2205
		2206	=over 4
		2207
		2208	=item queueing from a signal handler context
		2209
		2210	To implement race-free queueing, you simply add to the queue in the signal
		2211	handler but you block the signal handler in the watcher callback. Here is an example that does that for
		2212	some fictitiuous SIGUSR1 handler:
		2213
		2214	static ev_async mysig;
		2215
		2216	static void
		2217	sigusr1_handler (void)
		2218	{
		2219	sometype data;
		2220
		2221	// no locking etc.
		2222	queue_put (data);
		2223	ev_async_send (EV_DEFAULT_ &mysig);
		2224	}
		2225
		2226	static void
		2227	mysig_cb (EV_P_ ev_async *w, int revents)
		2228	{
		2229	sometype data;
		2230	sigset_t block, prev;
		2231
		2232	sigemptyset (&block);
		2233	sigaddset (&block, SIGUSR1);
		2234	sigprocmask (SIG_BLOCK, &block, &prev);
		2235
		2236	while (queue_get (&data))
		2237	process (data);
		2238
		2239	if (sigismember (&prev, SIGUSR1)
		2240	sigprocmask (SIG_UNBLOCK, &block, 0);
		2241	}
		2242
		2243	(Note: pthreads in theory requires you to use C<pthread_setmask>
		2244	instead of C<sigprocmask> when you use threads, but libev doesn't do it
		2245	either...).
		2246
		2247	=item queueing from a thread context
		2248
		2249	The strategy for threads is different, as you cannot (easily) block
		2250	threads but you can easily preempt them, so to queue safely you need to
		2251	employ a traditional mutex lock, such as in this pthread example:
		2252
		2253	static ev_async mysig;
		2254	static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;
		2255
		2256	static void
		2257	otherthread (void)
		2258	{
		2259	// only need to lock the actual queueing operation
		2260	pthread_mutex_lock (&mymutex);
		2261	queue_put (data);
		2262	pthread_mutex_unlock (&mymutex);
		2263
		2264	ev_async_send (EV_DEFAULT_ &mysig);
		2265	}
		2266
		2267	static void
		2268	mysig_cb (EV_P_ ev_async *w, int revents)
		2269	{
		2270	pthread_mutex_lock (&mymutex);
		2271
		2272	while (queue_get (&data))
		2273	process (data);
		2274
		2275	pthread_mutex_unlock (&mymutex);
		2276	}
		2277
		2278	=back
		2279
		2280
		2281	=head3 Watcher-Specific Functions and Data Members
		2282
		2283	=over 4
		2284
		2285	=item ev_async_init (ev_async *, callback)
		2286
		2287	Initialises and configures the async watcher - it has no parameters of any
		2288	kind. There is a C<ev_asynd_set> macro, but using it is utterly pointless,
		2289	believe me.
		2290
		2291	=item ev_async_send (loop, ev_async *)
		2292
		2293	Sends/signals/activates the given C<ev_async> watcher, that is, feeds
		2294	an C<EV_ASYNC> event on the watcher into the event loop. Unlike
		2295	C<ev_feed_event>, this call is safe to do in other threads, signal or
		2296	similar contexts (see the dicusssion of C<EV_ATOMIC_T> in the embedding
		2297	section below on what exactly this means).
		2298
		2299	This call incurs the overhead of a syscall only once per loop iteration,
		2300	so while the overhead might be noticable, it doesn't apply to repeated
		2301	calls to C<ev_async_send>.
		2302
		2303	=item bool = ev_async_pending (ev_async *)
		2304
		2305	Returns a non-zero value when C<ev_async_send> has been called on the
		2306	watcher but the event has not yet been processed (or even noted) by the
		2307	event loop.
		2308
		2309	C<ev_async_send> sets a flag in the watcher and wakes up the loop. When
		2310	the loop iterates next and checks for the watcher to have become active,
		2311	it will reset the flag again. C<ev_async_pending> can be used to very
		2312	quickly check wether invoking the loop might be a good idea.
		2313
		2314	Not that this does I<not> check wether the watcher itself is pending, only
		2315	wether it has been requested to make this watcher pending.
		2316
		2317	=back
		2318
		2319
1910	=head1 OTHER FUNCTIONS	2320	=head1 OTHER FUNCTIONS
1911		2321
1912	There are some other functions of possible interest. Described. Here. Now.	2322	There are some other functions of possible interest. Described. Here. Now.
1913		2323
1914	=over 4	2324	=over 4
…		…
1982		2392
1983	=item * Priorities are not currently supported. Initialising priorities	2393	=item * Priorities are not currently supported. Initialising priorities
1984	will fail and all watchers will have the same priority, even though there	2394	will fail and all watchers will have the same priority, even though there
1985	is an ev_pri field.	2395	is an ev_pri field.
1986		2396
		2397	=item * In libevent, the last base created gets the signals, in libev, the
		2398	first base created (== the default loop) gets the signals.
		2399
1987	=item * Other members are not supported.	2400	=item * Other members are not supported.
1988		2401
1989	=item * The libev emulation is I<not> ABI compatible to libevent, you need	2402	=item * The libev emulation is I<not> ABI compatible to libevent, you need
1990	to use the libev header file and library.	2403	to use the libev header file and library.
1991		2404
…		…
2141	Example: Define a class with an IO and idle watcher, start one of them in	2554	Example: Define a class with an IO and idle watcher, start one of them in
2142	the constructor.	2555	the constructor.
2143		2556
2144	class myclass	2557	class myclass
2145	{	2558	{
2146	ev_io io; void io_cb (ev::io &w, int revents);	2559	ev::io io; void io_cb (ev::io &w, int revents);
2147	ev_idle idle void idle_cb (ev::idle &w, int revents);	2560	ev:idle idle void idle_cb (ev::idle &w, int revents);
2148		2561
2149	myclass ();	2562	myclass (int fd)
2150	}
2151
2152	myclass::myclass (int fd)
2153	{	2563	{
2154	io .set <myclass, &myclass::io_cb > (this);	2564	io .set <myclass, &myclass::io_cb > (this);
2155	idle.set <myclass, &myclass::idle_cb> (this);	2565	idle.set <myclass, &myclass::idle_cb> (this);
2156		2566
2157	io.start (fd, ev::READ);	2567	io.start (fd, ev::READ);
		2568	}
2158	}	2569	};
		2570
		2571
		2572	=head1 OTHER LANGUAGE BINDINGS
		2573
		2574	Libev does not offer other language bindings itself, but bindings for a
		2575	numbe rof languages exist in the form of third-party packages. If you know
		2576	any interesting language binding in addition to the ones listed here, drop
		2577	me a note.
		2578
		2579	=over 4
		2580
		2581	=item Perl
		2582
		2583	The EV module implements the full libev API and is actually used to test
		2584	libev. EV is developed together with libev. Apart from the EV core module,
		2585	there are additional modules that implement libev-compatible interfaces
		2586	to C<libadns> (C<EV::ADNS>), C<Net::SNMP> (C<Net::SNMP::EV>) and the
		2587	C<libglib> event core (C<Glib::EV> and C<EV::Glib>).
		2588
		2589	It can be found and installed via CPAN, its homepage is found at
		2590	L<http://software.schmorp.de/pkg/EV>.
		2591
		2592	=item Ruby
		2593
		2594	Tony Arcieri has written a ruby extension that offers access to a subset
		2595	of the libev API and adds filehandle abstractions, asynchronous DNS and
		2596	more on top of it. It can be found via gem servers. Its homepage is at
		2597	L<http://rev.rubyforge.org/>.
		2598
		2599	=item D
		2600
		2601	Leandro Lucarella has written a D language binding (F<ev.d>) for libev, to
		2602	be found at L<http://git.llucax.com.ar/?p=software/ev.d.git;a=summary>.
		2603
		2604	=back
2159		2605
2160		2606
2161	=head1 MACRO MAGIC	2607	=head1 MACRO MAGIC
2162		2608
2163	Libev can be compiled with a variety of options, the most fundamantal	2609	Libev can be compiled with a variety of options, the most fundamantal
…		…
2199		2645
2200	=item C<EV_DEFAULT>, C<EV_DEFAULT_>	2646	=item C<EV_DEFAULT>, C<EV_DEFAULT_>
2201		2647
2202	Similar to the other two macros, this gives you the value of the default	2648	Similar to the other two macros, this gives you the value of the default
2203	loop, if multiple loops are supported ("ev loop default").	2649	loop, if multiple loops are supported ("ev loop default").
		2650
		2651	=item C<EV_DEFAULT_UC>, C<EV_DEFAULT_UC_>
		2652
		2653	Usage identical to C<EV_DEFAULT> and C<EV_DEFAULT_>, but requires that the
		2654	default loop has been initialised (C<UC> == unchecked). Their behaviour
		2655	is undefined when the default loop has not been initialised by a previous
		2656	execution of C<EV_DEFAULT>, C<EV_DEFAULT_> or C<ev_default_init (...)>.
		2657
		2658	It is often prudent to use C<EV_DEFAULT> when initialising the first
		2659	watcher in a function but use C<EV_DEFAULT_UC> afterwards.
2204		2660
2205	=back	2661	=back
2206		2662
2207	Example: Declare and initialise a check watcher, utilising the above	2663	Example: Declare and initialise a check watcher, utilising the above
2208	macros so it will work regardless of whether multiple loops are supported	2664	macros so it will work regardless of whether multiple loops are supported
…		…
2304		2760
2305	libev.m4	2761	libev.m4
2306		2762
2307	=head2 PREPROCESSOR SYMBOLS/MACROS	2763	=head2 PREPROCESSOR SYMBOLS/MACROS
2308		2764
2309	Libev can be configured via a variety of preprocessor symbols you have to define	2765	Libev can be configured via a variety of preprocessor symbols you have to
2310	before including any of its files. The default is not to build for multiplicity	2766	define before including any of its files. The default in the absense of
2311	and only include the select backend.	2767	autoconf is noted for every option.
2312		2768
2313	=over 4	2769	=over 4
2314		2770
2315	=item EV_STANDALONE	2771	=item EV_STANDALONE
2316		2772
…		…
2342	=item EV_USE_NANOSLEEP	2798	=item EV_USE_NANOSLEEP
2343		2799
2344	If defined to be C<1>, libev will assume that C<nanosleep ()> is available	2800	If defined to be C<1>, libev will assume that C<nanosleep ()> is available
2345	and will use it for delays. Otherwise it will use C<select ()>.	2801	and will use it for delays. Otherwise it will use C<select ()>.
2346		2802
		2803	=item EV_USE_EVENTFD
		2804
		2805	If defined to be C<1>, then libev will assume that C<eventfd ()> is
		2806	available and will probe for kernel support at runtime. This will improve
		2807	C<ev_signal> and C<ev_async> performance and reduce resource consumption.
		2808	If undefined, it will be enabled if the headers indicate GNU/Linux + Glibc
		2809	2.7 or newer, otherwise disabled.
		2810
2347	=item EV_USE_SELECT	2811	=item EV_USE_SELECT
2348		2812
2349	If undefined or defined to be C<1>, libev will compile in support for the	2813	If undefined or defined to be C<1>, libev will compile in support for the
2350	C<select>(2) backend. No attempt at autodetection will be done: if no	2814	C<select>(2) backend. No attempt at autodetection will be done: if no
2351	other method takes over, select will be it. Otherwise the select backend	2815	other method takes over, select will be it. Otherwise the select backend
…		…
2369	be used is the winsock select). This means that it will call	2833	be used is the winsock select). This means that it will call
2370	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2834	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2371	it is assumed that all these functions actually work on fds, even	2835	it is assumed that all these functions actually work on fds, even
2372	on win32. Should not be defined on non-win32 platforms.	2836	on win32. Should not be defined on non-win32 platforms.
2373		2837
		2838	=item EV_FD_TO_WIN32_HANDLE
		2839
		2840	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2841	file descriptors to socket handles. When not defining this symbol (the
		2842	default), then libev will call C<_get_osfhandle>, which is usually
		2843	correct. In some cases, programs use their own file descriptor management,
		2844	in which case they can provide this function to map fds to socket handles.
		2845
2374	=item EV_USE_POLL	2846	=item EV_USE_POLL
2375		2847
2376	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2848	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2377	backend. Otherwise it will be enabled on non-win32 platforms. It	2849	backend. Otherwise it will be enabled on non-win32 platforms. It
2378	takes precedence over select.	2850	takes precedence over select.
2379		2851
2380	=item EV_USE_EPOLL	2852	=item EV_USE_EPOLL
2381		2853
2382	If defined to be C<1>, libev will compile in support for the Linux	2854	If defined to be C<1>, libev will compile in support for the Linux
2383	C<epoll>(7) backend. Its availability will be detected at runtime,	2855	C<epoll>(7) backend. Its availability will be detected at runtime,
2384	otherwise another method will be used as fallback. This is the	2856	otherwise another method will be used as fallback. This is the preferred
2385	preferred backend for GNU/Linux systems.	2857	backend for GNU/Linux systems. If undefined, it will be enabled if the
		2858	headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
2386		2859
2387	=item EV_USE_KQUEUE	2860	=item EV_USE_KQUEUE
2388		2861
2389	If defined to be C<1>, libev will compile in support for the BSD style	2862	If defined to be C<1>, libev will compile in support for the BSD style
2390	C<kqueue>(2) backend. Its actual availability will be detected at runtime,	2863	C<kqueue>(2) backend. Its actual availability will be detected at runtime,
…		…
2409		2882
2410	=item EV_USE_INOTIFY	2883	=item EV_USE_INOTIFY
2411		2884
2412	If defined to be C<1>, libev will compile in support for the Linux inotify	2885	If defined to be C<1>, libev will compile in support for the Linux inotify
2413	interface to speed up C<ev_stat> watchers. Its actual availability will	2886	interface to speed up C<ev_stat> watchers. Its actual availability will
2414	be detected at runtime.	2887	be detected at runtime. If undefined, it will be enabled if the headers
		2888	indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.
		2889
		2890	=item EV_ATOMIC_T
		2891
		2892	Libev requires an integer type (suitable for storing C<0> or C<1>) whose
		2893	access is atomic with respect to other threads or signal contexts. No such
		2894	type is easily found in the C language, so you can provide your own type
		2895	that you know is safe for your purposes. It is used both for signal handler "locking"
		2896	as well as for signal and thread safety in C<ev_async> watchers.
		2897
		2898	In the absense of this define, libev will use C<sig_atomic_t volatile>
		2899	(from F<signal.h>), which is usually good enough on most platforms.
2415		2900
2416	=item EV_H	2901	=item EV_H
2417		2902
2418	The name of the F<ev.h> header file used to include it. The default if	2903	The name of the F<ev.h> header file used to include it. The default if
2419	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2904	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2420	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2905	used to virtually rename the F<ev.h> header file in case of conflicts.
2421		2906
2422	=item EV_CONFIG_H	2907	=item EV_CONFIG_H
2423		2908
2424	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2909	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2425	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2910	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2426	C<EV_H>, above.	2911	C<EV_H>, above.
2427		2912
2428	=item EV_EVENT_H	2913	=item EV_EVENT_H
2429		2914
2430	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2915	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2431	of how the F<event.h> header can be found.	2916	of how the F<event.h> header can be found, the default is C<"event.h">.
2432		2917
2433	=item EV_PROTOTYPES	2918	=item EV_PROTOTYPES
2434		2919
2435	If defined to be C<0>, then F<ev.h> will not define any function	2920	If defined to be C<0>, then F<ev.h> will not define any function
2436	prototypes, but still define all the structs and other symbols. This is	2921	prototypes, but still define all the structs and other symbols. This is
…		…
2487	=item EV_FORK_ENABLE	2972	=item EV_FORK_ENABLE
2488		2973
2489	If undefined or defined to be C<1>, then fork watchers are supported. If	2974	If undefined or defined to be C<1>, then fork watchers are supported. If
2490	defined to be C<0>, then they are not.	2975	defined to be C<0>, then they are not.
2491		2976
		2977	=item EV_ASYNC_ENABLE
		2978
		2979	If undefined or defined to be C<1>, then async watchers are supported. If
		2980	defined to be C<0>, then they are not.
		2981
2492	=item EV_MINIMAL	2982	=item EV_MINIMAL
2493		2983
2494	If you need to shave off some kilobytes of code at the expense of some	2984	If you need to shave off some kilobytes of code at the expense of some
2495	speed, define this symbol to C<1>. Currently only used for gcc to override	2985	speed, define this symbol to C<1>. Currently this is used to override some
2496	some inlining decisions, saves roughly 30% codesize of amd64.	2986	inlining decisions, saves roughly 30% codesize of amd64. It also selects a
		2987	much smaller 2-heap for timer management over the default 4-heap.
2497		2988
2498	=item EV_PID_HASHSIZE	2989	=item EV_PID_HASHSIZE
2499		2990
2500	C<ev_child> watchers use a small hash table to distribute workload by	2991	C<ev_child> watchers use a small hash table to distribute workload by
2501	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more	2992	pid. The default size is C<16> (or C<1> with C<EV_MINIMAL>), usually more
2502	than enough. If you need to manage thousands of children you might want to	2993	than enough. If you need to manage thousands of children you might want to
2503	increase this value (I<must> be a power of two).	2994	increase this value (I<must> be a power of two).
2504		2995
2505	=item EV_INOTIFY_HASHSIZE	2996	=item EV_INOTIFY_HASHSIZE
2506		2997
2507	C<ev_staz> watchers use a small hash table to distribute workload by	2998	C<ev_stat> watchers use a small hash table to distribute workload by
2508	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2999	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2509	usually more than enough. If you need to manage thousands of C<ev_stat>	3000	usually more than enough. If you need to manage thousands of C<ev_stat>
2510	watchers you might want to increase this value (I<must> be a power of	3001	watchers you might want to increase this value (I<must> be a power of
2511	two).	3002	two).
		3003
		3004	=item EV_USE_4HEAP
		3005
		3006	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3007	timer and periodics heap, libev uses a 4-heap when this symbol is defined
		3008	to C<1>. The 4-heap uses more complicated (longer) code but has
		3009	noticably faster performance with many (thousands) of watchers.
		3010
		3011	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3012	(disabled).
		3013
		3014	=item EV_HEAP_CACHE_AT
		3015
		3016	Heaps are not very cache-efficient. To improve the cache-efficiency of the
		3017	timer and periodics heap, libev can cache the timestamp (I<at>) within
		3018	the heap structure (selected by defining C<EV_HEAP_CACHE_AT> to C<1>),
		3019	which uses 8-12 bytes more per watcher and a few hundred bytes more code,
		3020	but avoids random read accesses on heap changes. This improves performance
		3021	noticably with with many (hundreds) of watchers.
		3022
		3023	The default is C<1> unless C<EV_MINIMAL> is set in which case it is C<0>
		3024	(disabled).
2512		3025
2513	=item EV_COMMON	3026	=item EV_COMMON
2514		3027
2515	By default, all watchers have a C<void *data> member. By redefining	3028	By default, all watchers have a C<void *data> member. By redefining
2516	this macro to a something else you can include more and other types of	3029	this macro to a something else you can include more and other types of
…		…
2590		3103
2591	#include "ev_cpp.h"	3104	#include "ev_cpp.h"
2592	#include "ev.c"	3105	#include "ev.c"
2593		3106
2594		3107
		3108	=head1 THREADS AND COROUTINES
		3109
		3110	=head2 THREADS
		3111
		3112	Libev itself is completely threadsafe, but it uses no locking. This
		3113	means that you can use as many loops as you want in parallel, as long as
		3114	only one thread ever calls into one libev function with the same loop
		3115	parameter.
		3116
		3117	Or put differently: calls with different loop parameters can be done in
		3118	parallel from multiple threads, calls with the same loop parameter must be
		3119	done serially (but can be done from different threads, as long as only one
		3120	thread ever is inside a call at any point in time, e.g. by using a mutex
		3121	per loop).
		3122
		3123	If you want to know which design is best for your problem, then I cannot
		3124	help you but by giving some generic advice:
		3125
		3126	=over 4
		3127
		3128	=item * most applications have a main thread: use the default libev loop
		3129	in that thread, or create a seperate thread running only the default loop.
		3130
		3131	This helps integrating other libraries or software modules that use libev
		3132	themselves and don't care/know about threading.
		3133
		3134	=item * one loop per thread is usually a good model.
		3135
		3136	Doing this is almost never wrong, sometimes a better-performance model
		3137	exists, but it is always a good start.
		3138
		3139	=item * other models exist, such as the leader/follower pattern, where one
		3140	loop is handed through multiple threads in a kind of round-robbin fashion.
		3141
		3142	Chosing a model is hard - look around, learn, know that usually you cna do
		3143	better than you currently do :-)
		3144
		3145	=item * often you need to talk to some other thread which blocks in the
		3146	event loop - C<ev_async> watchers can be used to wake them up from other
		3147	threads safely (or from signal contexts...).
		3148
		3149	=back
		3150
		3151	=head2 COROUTINES
		3152
		3153	Libev is much more accomodating to coroutines ("cooperative threads"):
		3154	libev fully supports nesting calls to it's functions from different
		3155	coroutines (e.g. you can call C<ev_loop> on the same loop from two
		3156	different coroutines and switch freely between both coroutines running the
		3157	loop, as long as you don't confuse yourself). The only exception is that
		3158	you must not do this from C<ev_periodic> reschedule callbacks.
		3159
		3160	Care has been invested into making sure that libev does not keep local
		3161	state inside C<ev_loop>, and other calls do not usually allow coroutine
		3162	switches.
		3163
		3164
2595	=head1 COMPLEXITIES	3165	=head1 COMPLEXITIES
2596		3166
2597	In this section the complexities of (many of) the algorithms used inside	3167	In this section the complexities of (many of) the algorithms used inside
2598	libev will be explained. For complexity discussions about backends see the	3168	libev will be explained. For complexity discussions about backends see the
2599	documentation for C<ev_default_init>.	3169	documentation for C<ev_default_init>.
…		…
2608		3178
2609	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	3179	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2610		3180
2611	This means that, when you have a watcher that triggers in one hour and	3181	This means that, when you have a watcher that triggers in one hour and
2612	there are 100 watchers that would trigger before that then inserting will	3182	there are 100 watchers that would trigger before that then inserting will
2613	have to skip those 100 watchers.	3183	have to skip roughly seven (C<ld 100>) of these watchers.
2614		3184
2615	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	3185	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2616		3186
2617	That means that for changing a timer costs less than removing/adding them	3187	That means that changing a timer costs less than removing/adding them
2618	as only the relative motion in the event queue has to be paid for.	3188	as only the relative motion in the event queue has to be paid for.
2619		3189
2620	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	3190	=item Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
2621		3191
2622	These just add the watcher into an array or at the head of a list.	3192	These just add the watcher into an array or at the head of a list.
		3193
2623	=item Stopping check/prepare/idle watchers: O(1)	3194	=item Stopping check/prepare/idle/fork/async watchers: O(1)
2624		3195
2625	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	3196	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2626		3197
2627	These watchers are stored in lists then need to be walked to find the	3198	These watchers are stored in lists then need to be walked to find the
2628	correct watcher to remove. The lists are usually short (you don't usually	3199	correct watcher to remove. The lists are usually short (you don't usually
2629	have many watchers waiting for the same fd or signal).	3200	have many watchers waiting for the same fd or signal).
2630		3201
2631	=item Finding the next timer per loop iteration: O(1)	3202	=item Finding the next timer in each loop iteration: O(1)
		3203
		3204	By virtue of using a binary or 4-heap, the next timer is always found at a
		3205	fixed position in the storage array.
2632		3206
2633	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	3207	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2634		3208
2635	A change means an I/O watcher gets started or stopped, which requires	3209	A change means an I/O watcher gets started or stopped, which requires
2636	libev to recalculate its status (and possibly tell the kernel).	3210	libev to recalculate its status (and possibly tell the kernel, depending
		3211	on backend and wether C<ev_io_set> was used).
2637		3212
2638	=item Activating one watcher: O(1)	3213	=item Activating one watcher (putting it into the pending state): O(1)
2639		3214
2640	=item Priority handling: O(number_of_priorities)	3215	=item Priority handling: O(number_of_priorities)
2641		3216
2642	Priorities are implemented by allocating some space for each	3217	Priorities are implemented by allocating some space for each
2643	priority. When doing priority-based operations, libev usually has to	3218	priority. When doing priority-based operations, libev usually has to
2644	linearly search all the priorities.	3219	linearly search all the priorities, but starting/stopping and activating
		3220	watchers becomes O(1) w.r.t. priority handling.
		3221
		3222	=item Sending an ev_async: O(1)
		3223
		3224	=item Processing ev_async_send: O(number_of_async_watchers)
		3225
		3226	=item Processing signals: O(max_signal_number)
		3227
		3228	Sending involves a syscall I<iff> there were no other C<ev_async_send>
		3229	calls in the current loop iteration. Checking for async and signal events
		3230	involves iterating over all running async watchers or all signal numbers.
2645		3231
2646	=back	3232	=back
2647		3233
2648		3234
		3235	=head1 Win32 platform limitations and workarounds
		3236
		3237	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		3238	requires, and its I/O model is fundamentally incompatible with the POSIX
		3239	model. Libev still offers limited functionality on this platform in
		3240	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		3241	descriptors. This only applies when using Win32 natively, not when using
		3242	e.g. cygwin.
		3243
		3244	Lifting these limitations would basically require the full
		3245	re-implementation of the I/O system. If you are into these kinds of
		3246	things, then note that glib does exactly that for you in a very portable
		3247	way (note also that glib is the slowest event library known to man).
		3248
		3249	There is no supported compilation method available on windows except
		3250	embedding it into other applications.
		3251
		3252	Due to the many, low, and arbitrary limits on the win32 platform and
		3253	the abysmal performance of winsockets, using a large number of sockets
		3254	is not recommended (and not reasonable). If your program needs to use
		3255	more than a hundred or so sockets, then likely it needs to use a totally
		3256	different implementation for windows, as libev offers the POSIX readiness
		3257	notification model, which cannot be implemented efficiently on windows
		3258	(microsoft monopoly games).
		3259
		3260	=over 4
		3261
		3262	=item The winsocket select function
		3263
		3264	The winsocket C<select> function doesn't follow POSIX in that it requires
		3265	socket I<handles> and not socket I<file descriptors>. This makes select
		3266	very inefficient, and also requires a mapping from file descriptors
		3267	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,
		3268	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor
		3269	symbols for more info.
		3270
		3271	The configuration for a "naked" win32 using the microsoft runtime
		3272	libraries and raw winsocket select is:
		3273
		3274	#define EV_USE_SELECT 1
		3275	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		3276
		3277	Note that winsockets handling of fd sets is O(n), so you can easily get a
		3278	complexity in the O(n²) range when using win32.
		3279
		3280	=item Limited number of file descriptors
		3281
		3282	Windows has numerous arbitrary (and low) limits on things.
		3283
		3284	Early versions of winsocket's select only supported waiting for a maximum
		3285	of C<64> handles (probably owning to the fact that all windows kernels
		3286	can only wait for C<64> things at the same time internally; microsoft
		3287	recommends spawning a chain of threads and wait for 63 handles and the
		3288	previous thread in each. Great).
		3289
		3290	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		3291	to some high number (e.g. C<2048>) before compiling the winsocket select
		3292	call (which might be in libev or elsewhere, for example, perl does its own
		3293	select emulation on windows).
		3294
		3295	Another limit is the number of file descriptors in the microsoft runtime
		3296	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		3297	or something like this inside microsoft). You can increase this by calling
		3298	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		3299	arbitrary limit), but is broken in many versions of the microsoft runtime
		3300	libraries.
		3301
		3302	This might get you to about C<512> or C<2048> sockets (depending on
		3303	windows version and/or the phase of the moon). To get more, you need to
		3304	wrap all I/O functions and provide your own fd management, but the cost of
		3305	calling select (O(n²)) will likely make this unworkable.
		3306
		3307	=back
		3308
		3309
		3310	=head1 PORTABILITY REQUIREMENTS
		3311
		3312	In addition to a working ISO-C implementation, libev relies on a few
		3313	additional extensions:
		3314
		3315	=over 4
		3316
		3317	=item C<sig_atomic_t volatile> must be thread-atomic as well
		3318
		3319	The type C<sig_atomic_t volatile> (or whatever is defined as
		3320	C<EV_ATOMIC_T>) must be atomic w.r.t. accesses from different
		3321	threads. This is not part of the specification for C<sig_atomic_t>, but is
		3322	believed to be sufficiently portable.
		3323
		3324	=item C<sigprocmask> must work in a threaded environment
		3325
		3326	Libev uses C<sigprocmask> to temporarily block signals. This is not
		3327	allowed in a threaded program (C<pthread_sigmask> has to be used). Typical
		3328	pthread implementations will either allow C<sigprocmask> in the "main
		3329	thread" or will block signals process-wide, both behaviours would
		3330	be compatible with libev. Interaction between C<sigprocmask> and
		3331	C<pthread_sigmask> could complicate things, however.
		3332
		3333	The most portable way to handle signals is to block signals in all threads
		3334	except the initial one, and run the default loop in the initial thread as
		3335	well.
		3336
		3337	=item C<long> must be large enough for common memory allocation sizes
		3338
		3339	To improve portability and simplify using libev, libev uses C<long>
		3340	internally instead of C<size_t> when allocating its data structures. On
		3341	non-POSIX systems (Microsoft...) this might be unexpectedly low, but
		3342	is still at least 31 bits everywhere, which is enough for hundreds of
		3343	millions of watchers.
		3344
		3345	=item C<double> must hold a time value in seconds with enough accuracy
		3346
		3347	The type C<double> is used to represent timestamps. It is required to
		3348	have at least 51 bits of mantissa (and 9 bits of exponent), which is good
		3349	enough for at least into the year 4000. This requirement is fulfilled by
		3350	implementations implementing IEEE 754 (basically all existing ones).
		3351
		3352	=back
		3353
		3354	If you know of other additional requirements drop me a note.
		3355
		3356
2649	=head1 AUTHOR	3357	=head1 AUTHOR
2650		3358
2651	Marc Lehmann <libev@schmorp.de>.	3359	Marc Lehmann <libev@schmorp.de>.
2652		3360

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines