[ViewVC] Diff of: cvs/libev/ev.pod

Comparing libev/ev.pod (file contents):
Revision 1.99 by root, Sat Dec 22 06:16:36 2007 UTC vs.
Revision 1.118 by root, Thu Jan 10 06:00:55 2008 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	#include <ev.h>	7	#include <ev.h>
8		8
9	=head1 EXAMPLE PROGRAM	9	=head2 EXAMPLE PROGRAM
10		10
11	#include <ev.h>	11	#include <ev.h>
12		12
13	ev_io stdin_watcher;	13	ev_io stdin_watcher;
14	ev_timer timeout_watcher;	14	ev_timer timeout_watcher;
…		…
65	You register interest in certain events by registering so-called I<event	65	You register interest in certain events by registering so-called I<event
66	watchers>, which are relatively small C structures you initialise with the	66	watchers>, which are relatively small C structures you initialise with the
67	details of the event, and then hand it over to libev by I<starting> the	67	details of the event, and then hand it over to libev by I<starting> the
68	watcher.	68	watcher.
69		69
70	=head1 FEATURES	70	=head2 FEATURES
71		71
72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the	72	Libev supports C<select>, C<poll>, the Linux-specific C<epoll>, the
73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms	73	BSD-specific C<kqueue> and the Solaris-specific event port mechanisms
74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface	74	for file descriptor events (C<ev_io>), the Linux C<inotify> interface
75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers	75	(for C<ev_stat>), relative timers (C<ev_timer>), absolute timers
…		…
82		82
83	It also is quite fast (see this	83	It also is quite fast (see this
84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent	84	L<benchmark\|http://libev.schmorp.de/bench.html> comparing it to libevent
85	for example).	85	for example).
86		86
87	=head1 CONVENTIONS	87	=head2 CONVENTIONS
88		88
89	Libev is very configurable. In this manual the default configuration will	89	Libev is very configurable. In this manual the default configuration will
90	be described, which supports multiple event loops. For more info about	90	be described, which supports multiple event loops. For more info about
91	various configuration options please have a look at B<EMBED> section in	91	various configuration options please have a look at B<EMBED> section in
92	this manual. If libev was configured without support for multiple event	92	this manual. If libev was configured without support for multiple event
93	loops, then all functions taking an initial argument of name C<loop>	93	loops, then all functions taking an initial argument of name C<loop>
94	(which is always of type C<struct ev_loop *>) will not have this argument.	94	(which is always of type C<struct ev_loop *>) will not have this argument.
95		95
96	=head1 TIME REPRESENTATION	96	=head2 TIME REPRESENTATION
97		97
98	Libev represents time as a single floating point number, representing the	98	Libev represents time as a single floating point number, representing the
99	(fractional) number of seconds since the (POSIX) epoch (somewhere near	99	(fractional) number of seconds since the (POSIX) epoch (somewhere near
100	the beginning of 1970, details are complicated, don't ask). This type is	100	the beginning of 1970, details are complicated, don't ask). This type is
101	called C<ev_tstamp>, which is what you should use too. It usually aliases	101	called C<ev_tstamp>, which is what you should use too. It usually aliases
…		…
260	flags. If that is troubling you, check C<ev_backend ()> afterwards).	260	flags. If that is troubling you, check C<ev_backend ()> afterwards).
261		261
262	If you don't know what event loop to use, use the one returned from this	262	If you don't know what event loop to use, use the one returned from this
263	function.	263	function.
264		264
		265	The default loop is the only loop that can handle C<ev_signal> and
		266	C<ev_child> watchers, and to do this, it always registers a handler
		267	for C<SIGCHLD>. If this is a problem for your app you can either
		268	create a dynamic loop with C<ev_loop_new> that doesn't do that, or you
		269	can simply overwrite the C<SIGCHLD> signal handler I<after> calling
		270	C<ev_default_init>.
		271
265	The flags argument can be used to specify special behaviour or specific	272	The flags argument can be used to specify special behaviour or specific
266	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).	273	backends to use, and is usually specified as C<0> (or C<EVFLAG_AUTO>).
267		274
268	The following flags are supported:	275	The following flags are supported:
269		276
…		…
306	=item C<EVBACKEND_SELECT> (value 1, portable select backend)	313	=item C<EVBACKEND_SELECT> (value 1, portable select backend)
307		314
308	This is your standard select(2) backend. Not I<completely> standard, as	315	This is your standard select(2) backend. Not I<completely> standard, as
309	libev tries to roll its own fd_set with no limits on the number of fds,	316	libev tries to roll its own fd_set with no limits on the number of fds,
310	but if that fails, expect a fairly low limit on the number of fds when	317	but if that fails, expect a fairly low limit on the number of fds when
311	using this backend. It doesn't scale too well (O(highest_fd)), but its usually	318	using this backend. It doesn't scale too well (O(highest_fd)), but its
312	the fastest backend for a low number of fds.	319	usually the fastest backend for a low number of (low-numbered :) fds.
		320
		321	To get good performance out of this backend you need a high amount of
		322	parallelity (most of the file descriptors should be busy). If you are
		323	writing a server, you should C<accept ()> in a loop to accept as many
		324	connections as possible during one iteration. You might also want to have
		325	a look at C<ev_set_io_collect_interval ()> to increase the amount of
		326	readyness notifications you get per iteration.
313		327
314	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)	328	=item C<EVBACKEND_POLL> (value 2, poll backend, available everywhere except on windows)
315		329
316	And this is your standard poll(2) backend. It's more complicated than	330	And this is your standard poll(2) backend. It's more complicated
317	select, but handles sparse fds better and has no artificial limit on the	331	than select, but handles sparse fds better and has no artificial
318	number of fds you can use (except it will slow down considerably with a	332	limit on the number of fds you can use (except it will slow down
319	lot of inactive fds). It scales similarly to select, i.e. O(total_fds).	333	considerably with a lot of inactive fds). It scales similarly to select,
		334	i.e. O(total_fds). See the entry for C<EVBACKEND_SELECT>, above, for
		335	performance tips.
320		336
321	=item C<EVBACKEND_EPOLL> (value 4, Linux)	337	=item C<EVBACKEND_EPOLL> (value 4, Linux)
322		338
323	For few fds, this backend is a bit little slower than poll and select,	339	For few fds, this backend is a bit little slower than poll and select,
324	but it scales phenomenally better. While poll and select usually scale	340	but it scales phenomenally better. While poll and select usually scale
325	like O(total_fds) where n is the total number of fds (or the highest fd),	341	like O(total_fds) where n is the total number of fds (or the highest fd),
326	epoll scales either O(1) or O(active_fds). The epoll design has a number	342	epoll scales either O(1) or O(active_fds). The epoll design has a number
327	of shortcomings, such as silently dropping events in some hard-to-detect	343	of shortcomings, such as silently dropping events in some hard-to-detect
328	cases and rewiring a syscall per fd change, no fork support and bad	344	cases and rewiring a syscall per fd change, no fork support and bad
329	support for dup:	345	support for dup.
330		346
331	While stopping, setting and starting an I/O watcher in the same iteration	347	While stopping, setting and starting an I/O watcher in the same iteration
332	will result in some caching, there is still a syscall per such incident	348	will result in some caching, there is still a syscall per such incident
333	(because the fd could point to a different file description now), so its	349	(because the fd could point to a different file description now), so its
334	best to avoid that. Also, C<dup ()>'ed file descriptors might not work	350	best to avoid that. Also, C<dup ()>'ed file descriptors might not work
…		…
336		352
337	Please note that epoll sometimes generates spurious notifications, so you	353	Please note that epoll sometimes generates spurious notifications, so you
338	need to use non-blocking I/O or other means to avoid blocking when no data	354	need to use non-blocking I/O or other means to avoid blocking when no data
339	(or space) is available.	355	(or space) is available.
340		356
		357	Best performance from this backend is achieved by not unregistering all
		358	watchers for a file descriptor until it has been closed, if possible, i.e.
		359	keep at least one watcher active per fd at all times.
		360
		361	While nominally embeddeble in other event loops, this feature is broken in
		362	all kernel versions tested so far.
		363
341	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)	364	=item C<EVBACKEND_KQUEUE> (value 8, most BSD clones)
342		365
343	Kqueue deserves special mention, as at the time of this writing, it	366	Kqueue deserves special mention, as at the time of this writing, it
344	was broken on I<all> BSDs (usually it doesn't work with anything but	367	was broken on all BSDs except NetBSD (usually it doesn't work reliably
345	sockets and pipes, except on Darwin, where of course it's completely	368	with anything but sockets and pipes, except on Darwin, where of course
346	useless. On NetBSD, it seems to work for all the FD types I tested, so it
347	is used by default there). For this reason it's not being "autodetected"	369	it's completely useless). For this reason it's not being "autodetected"
348	unless you explicitly specify it explicitly in the flags (i.e. using	370	unless you explicitly specify it explicitly in the flags (i.e. using
349	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)	371	C<EVBACKEND_KQUEUE>) or libev was compiled on a known-to-be-good (-enough)
350	system like NetBSD.	372	system like NetBSD.
351		373
		374	You still can embed kqueue into a normal poll or select backend and use it
		375	only for sockets (after having made sure that sockets work with kqueue on
		376	the target platform). See C<ev_embed> watchers for more info.
		377
352	It scales in the same way as the epoll backend, but the interface to the	378	It scales in the same way as the epoll backend, but the interface to the
353	kernel is more efficient (which says nothing about its actual speed,	379	kernel is more efficient (which says nothing about its actual speed, of
354	of course). While stopping, setting and starting an I/O watcher does	380	course). While stopping, setting and starting an I/O watcher does never
355	never cause an extra syscall as with epoll, it still adds up to two event	381	cause an extra syscall as with C<EVBACKEND_EPOLL>, it still adds up to
356	changes per incident, support for C<fork ()> is very bad and it drops fds	382	two event changes per incident, support for C<fork ()> is very bad and it
357	silently in similarly hard-to-detetc cases.	383	drops fds silently in similarly hard-to-detect cases.
		384
		385	This backend usually performs well under most conditions.
		386
		387	While nominally embeddable in other event loops, this doesn't work
		388	everywhere, so you might need to test for this. And since it is broken
		389	almost everywhere, you should only use it when you have a lot of sockets
		390	(for which it usually works), by embedding it into another event loop
		391	(e.g. C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>) and using it only for
		392	sockets.
358		393
359	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)	394	=item C<EVBACKEND_DEVPOLL> (value 16, Solaris 8)
360		395
361	This is not implemented yet (and might never be).	396	This is not implemented yet (and might never be, unless you send me an
		397	implementation). According to reports, C</dev/poll> only supports sockets
		398	and is not embeddable, which would limit the usefulness of this backend
		399	immensely.
362		400
363	=item C<EVBACKEND_PORT> (value 32, Solaris 10)	401	=item C<EVBACKEND_PORT> (value 32, Solaris 10)
364		402
365	This uses the Solaris 10 event port mechanism. As with everything on Solaris,	403	This uses the Solaris 10 event port mechanism. As with everything on Solaris,
366	it's really slow, but it still scales very well (O(active_fds)).	404	it's really slow, but it still scales very well (O(active_fds)).
367		405
368	Please note that solaris event ports can deliver a lot of spurious	406	Please note that solaris event ports can deliver a lot of spurious
369	notifications, so you need to use non-blocking I/O or other means to avoid	407	notifications, so you need to use non-blocking I/O or other means to avoid
370	blocking when no data (or space) is available.	408	blocking when no data (or space) is available.
371		409
		410	While this backend scales well, it requires one system call per active
		411	file descriptor per loop iteration. For small and medium numbers of file
		412	descriptors a "slow" C<EVBACKEND_SELECT> or C<EVBACKEND_POLL> backend
		413	might perform better.
		414
		415	On the positive side, ignoring the spurious readyness notifications, this
		416	backend actually performed to specification in all tests and is fully
		417	embeddable, which is a rare feat among the OS-specific backends.
		418
372	=item C<EVBACKEND_ALL>	419	=item C<EVBACKEND_ALL>
373		420
374	Try all backends (even potentially broken ones that wouldn't be tried	421	Try all backends (even potentially broken ones that wouldn't be tried
375	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as	422	with C<EVFLAG_AUTO>). Since this is a mask, you can do stuff such as
376	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.	423	C<EVBACKEND_ALL & ~EVBACKEND_KQUEUE>.
377		424
		425	It is definitely not recommended to use this flag.
		426
378	=back	427	=back
379		428
380	If one or more of these are ored into the flags value, then only these	429	If one or more of these are ored into the flags value, then only these
381	backends will be tried (in the reverse order as given here). If none are	430	backends will be tried (in the reverse order as listed here). If none are
382	specified, most compiled-in backend will be tried, usually in reverse	431	specified, all backends in C<ev_recommended_backends ()> will be tried.
383	order of their flag values :)
384		432
385	The most typical usage is like this:	433	The most typical usage is like this:
386		434
387	if (!ev_default_loop (0))	435	if (!ev_default_loop (0))
388	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");	436	fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");
…		…
513	usually a better approach for this kind of thing.	561	usually a better approach for this kind of thing.
514		562
515	Here are the gory details of what C<ev_loop> does:	563	Here are the gory details of what C<ev_loop> does:
516		564
517	- Before the first iteration, call any pending watchers.	565	- Before the first iteration, call any pending watchers.
518	* If there are no active watchers (reference count is zero), return.	566	* If EVFLAG_FORKCHECK was used, check for a fork.
519	- Queue all prepare watchers and then call all outstanding watchers.	567	- If a fork was detected, queue and call all fork watchers.
		568	- Queue and call all prepare watchers.
520	- If we have been forked, recreate the kernel state.	569	- If we have been forked, recreate the kernel state.
521	- Update the kernel state with all outstanding changes.	570	- Update the kernel state with all outstanding changes.
522	- Update the "event loop time".	571	- Update the "event loop time".
523	- Calculate for how long to block.	572	- Calculate for how long to sleep or block, if at all
		573	(active idle watchers, EVLOOP_NONBLOCK or not having
		574	any active watchers at all will result in not sleeping).
		575	- Sleep if the I/O and timer collect interval say so.
524	- Block the process, waiting for any events.	576	- Block the process, waiting for any events.
525	- Queue all outstanding I/O (fd) events.	577	- Queue all outstanding I/O (fd) events.
526	- Update the "event loop time" and do time jump handling.	578	- Update the "event loop time" and do time jump handling.
527	- Queue all outstanding timers.	579	- Queue all outstanding timers.
528	- Queue all outstanding periodics.	580	- Queue all outstanding periodics.
529	- If no events are pending now, queue all idle watchers.	581	- If no events are pending now, queue all idle watchers.
530	- Queue all check watchers.	582	- Queue all check watchers.
531	- Call all queued watchers in reverse order (i.e. check watchers first).	583	- Call all queued watchers in reverse order (i.e. check watchers first).
532	Signals and child watchers are implemented as I/O watchers, and will	584	Signals and child watchers are implemented as I/O watchers, and will
533	be handled here by queueing them when their watcher gets executed.	585	be handled here by queueing them when their watcher gets executed.
534	- If ev_unloop has been called or EVLOOP_ONESHOT or EVLOOP_NONBLOCK	586	- If ev_unloop has been called, or EVLOOP_ONESHOT or EVLOOP_NONBLOCK
535	were used, return, otherwise continue with step *.	587	were used, or there are no active watchers, return, otherwise
		588	continue with step *.
536		589
537	Example: Queue some jobs and then loop until no events are outsanding	590	Example: Queue some jobs and then loop until no events are outstanding
538	anymore.	591	anymore.
539		592
540	... queue jobs here, make sure they register event watchers as long	593	... queue jobs here, make sure they register event watchers as long
541	... as they still have work to do (even an idle watcher will do..)	594	... as they still have work to do (even an idle watcher will do..)
542	ev_loop (my_loop, 0);	595	ev_loop (my_loop, 0);
…		…
546		599
547	Can be used to make a call to C<ev_loop> return early (but only after it	600	Can be used to make a call to C<ev_loop> return early (but only after it
548	has processed all outstanding events). The C<how> argument must be either	601	has processed all outstanding events). The C<how> argument must be either
549	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or	602	C<EVUNLOOP_ONE>, which will make the innermost C<ev_loop> call return, or
550	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.	603	C<EVUNLOOP_ALL>, which will make all nested C<ev_loop> calls return.
		604
		605	This "unloop state" will be cleared when entering C<ev_loop> again.
551		606
552	=item ev_ref (loop)	607	=item ev_ref (loop)
553		608
554	=item ev_unref (loop)	609	=item ev_unref (loop)
555		610
…		…
560	returning, ev_unref() after starting, and ev_ref() before stopping it. For	615	returning, ev_unref() after starting, and ev_ref() before stopping it. For
561	example, libev itself uses this for its internal signal pipe: It is not	616	example, libev itself uses this for its internal signal pipe: It is not
562	visible to the libev user and should not keep C<ev_loop> from exiting if	617	visible to the libev user and should not keep C<ev_loop> from exiting if
563	no event watchers registered by it are active. It is also an excellent	618	no event watchers registered by it are active. It is also an excellent
564	way to do this for generic recurring timers or from within third-party	619	way to do this for generic recurring timers or from within third-party
565	libraries. Just remember to I<unref after start> and I<ref before stop>.	620	libraries. Just remember to I<unref after start> and I<ref before stop>
		621	(but only if the watcher wasn't active before, or was active before,
		622	respectively).
566		623
567	Example: Create a signal watcher, but keep it from keeping C<ev_loop>	624	Example: Create a signal watcher, but keep it from keeping C<ev_loop>
568	running when nothing else is active.	625	running when nothing else is active.
569		626
570	struct ev_signal exitsig;	627	struct ev_signal exitsig;
…		…
596	overhead for the actual polling but can deliver many events at once.	653	overhead for the actual polling but can deliver many events at once.
597		654
598	By setting a higher I<io collect interval> you allow libev to spend more	655	By setting a higher I<io collect interval> you allow libev to spend more
599	time collecting I/O events, so you can handle more events per iteration,	656	time collecting I/O events, so you can handle more events per iteration,
600	at the cost of increasing latency. Timeouts (both C<ev_periodic> and	657	at the cost of increasing latency. Timeouts (both C<ev_periodic> and
601	C<ev_timer>) will be not affected. Setting this to a non-null bvalue will	658	C<ev_timer>) will be not affected. Setting this to a non-null value will
602	introduce an additional C<ev_sleep ()> call into most loop iterations.	659	introduce an additional C<ev_sleep ()> call into most loop iterations.
603		660
604	Likewise, by setting a higher I<timeout collect interval> you allow libev	661	Likewise, by setting a higher I<timeout collect interval> you allow libev
605	to spend more time collecting timeouts, at the expense of increased	662	to spend more time collecting timeouts, at the expense of increased
606	latency (the watcher callback will be called later). C<ev_io> watchers	663	latency (the watcher callback will be called later). C<ev_io> watchers
…		…
945	In general you can register as many read and/or write event watchers per	1002	In general you can register as many read and/or write event watchers per
946	fd as you want (as long as you don't confuse yourself). Setting all file	1003	fd as you want (as long as you don't confuse yourself). Setting all file
947	descriptors to non-blocking mode is also usually a good idea (but not	1004	descriptors to non-blocking mode is also usually a good idea (but not
948	required if you know what you are doing).	1005	required if you know what you are doing).
949		1006
950	You have to be careful with dup'ed file descriptors, though. Some backends
951	(the linux epoll backend is a notable example) cannot handle dup'ed file
952	descriptors correctly if you register interest in two or more fds pointing
953	to the same underlying file/socket/etc. description (that is, they share
954	the same underlying "file open").
955
956	If you must do this, then force the use of a known-to-be-good backend	1007	If you must do this, then force the use of a known-to-be-good backend
957	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and	1008	(at the time of this writing, this includes only C<EVBACKEND_SELECT> and
958	C<EVBACKEND_POLL>).	1009	C<EVBACKEND_POLL>).
959		1010
960	Another thing you have to watch out for is that it is quite easy to	1011	Another thing you have to watch out for is that it is quite easy to
…		…
994	optimisations to libev.	1045	optimisations to libev.
995		1046
996	=head3 The special problem of dup'ed file descriptors	1047	=head3 The special problem of dup'ed file descriptors
997		1048
998	Some backends (e.g. epoll), cannot register events for file descriptors,	1049	Some backends (e.g. epoll), cannot register events for file descriptors,
999	but only events for the underlying file descriptions. That menas when you	1050	but only events for the underlying file descriptions. That means when you
1000	have C<dup ()>'ed file descriptors and register events for them, only one	1051	have C<dup ()>'ed file descriptors or weirder constellations, and register
1001	file descriptor might actually receive events.	1052	events for them, only one file descriptor might actually receive events.
1002		1053
1003	There is no workaorund possible except not registering events	1054	There is no workaround possible except not registering events
1004	for potentially C<dup ()>'ed file descriptors or to resort to	1055	for potentially C<dup ()>'ed file descriptors, or to resort to
1005	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.	1056	C<EVBACKEND_SELECT> or C<EVBACKEND_POLL>.
1006		1057
1007	=head3 The special problem of fork	1058	=head3 The special problem of fork
1008		1059
1009	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit	1060	Some backends (epoll, kqueue) do not support C<fork ()> at all or exhibit
…		…
1035	=item int events [read-only]	1086	=item int events [read-only]
1036		1087
1037	The events being watched.	1088	The events being watched.
1038		1089
1039	=back	1090	=back
		1091
		1092	=head3 Examples
1040		1093
1041	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well	1094	Example: Call C<stdin_readable_cb> when STDIN_FILENO has become, well
1042	readable, but only once. Since it is likely line-buffered, you could	1095	readable, but only once. Since it is likely line-buffered, you could
1043	attempt to read a whole line in the callback.	1096	attempt to read a whole line in the callback.
1044		1097
…		…
1142	or C<ev_timer_again> is called and determines the next timeout (if any),	1195	or C<ev_timer_again> is called and determines the next timeout (if any),
1143	which is also when any modifications are taken into account.	1196	which is also when any modifications are taken into account.
1144		1197
1145	=back	1198	=back
1146		1199
		1200	=head3 Examples
		1201
1147	Example: Create a timer that fires after 60 seconds.	1202	Example: Create a timer that fires after 60 seconds.
1148		1203
1149	static void	1204	static void
1150	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)	1205	one_minute_cb (struct ev_loop loop, struct ev_timer w, int revents)
1151	{	1206	{
…		…
1308	When active, contains the absolute time that the watcher is supposed to	1363	When active, contains the absolute time that the watcher is supposed to
1309	trigger next.	1364	trigger next.
1310		1365
1311	=back	1366	=back
1312		1367
		1368	=head3 Examples
		1369
1313	Example: Call a callback every hour, or, more precisely, whenever the	1370	Example: Call a callback every hour, or, more precisely, whenever the
1314	system clock is divisible by 3600. The callback invocation times have	1371	system clock is divisible by 3600. The callback invocation times have
1315	potentially a lot of jittering, but good long-term stability.	1372	potentially a lot of jittering, but good long-term stability.
1316		1373
1317	static void	1374	static void
…		…
1408		1465
1409	The process exit/trace status caused by C<rpid> (see your systems	1466	The process exit/trace status caused by C<rpid> (see your systems
1410	C<waitpid> and C<sys/wait.h> documentation for details).	1467	C<waitpid> and C<sys/wait.h> documentation for details).
1411		1468
1412	=back	1469	=back
		1470
		1471	=head3 Examples
1413		1472
1414	Example: Try to exit cleanly on SIGINT and SIGTERM.	1473	Example: Try to exit cleanly on SIGINT and SIGTERM.
1415		1474
1416	static void	1475	static void
1417	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)	1476	sigint_cb (struct ev_loop loop, struct ev_signal w, int revents)
…		…
1458	semantics of C<ev_stat> watchers, which means that libev sometimes needs	1517	semantics of C<ev_stat> watchers, which means that libev sometimes needs
1459	to fall back to regular polling again even with inotify, but changes are	1518	to fall back to regular polling again even with inotify, but changes are
1460	usually detected immediately, and if the file exists there will be no	1519	usually detected immediately, and if the file exists there will be no
1461	polling.	1520	polling.
1462		1521
		1522	=head3 Inotify
		1523
		1524	When C<inotify (7)> support has been compiled into libev (generally only
		1525	available on Linux) and present at runtime, it will be used to speed up
		1526	change detection where possible. The inotify descriptor will be created lazily
		1527	when the first C<ev_stat> watcher is being started.
		1528
		1529	Inotify presense does not change the semantics of C<ev_stat> watchers
		1530	except that changes might be detected earlier, and in some cases, to avoid
		1531	making regular C<stat> calls. Even in the presense of inotify support
		1532	there are many cases where libev has to resort to regular C<stat> polling.
		1533
		1534	(There is no support for kqueue, as apparently it cannot be used to
		1535	implement this functionality, due to the requirement of having a file
		1536	descriptor open on the object at all times).
		1537
		1538	=head3 The special problem of stat time resolution
		1539
		1540	The C<stat ()> syscall only supports full-second resolution portably, and
		1541	even on systems where the resolution is higher, many filesystems still
		1542	only support whole seconds.
		1543
		1544	That means that, if the time is the only thing that changes, you might
		1545	miss updates: on the first update, C<ev_stat> detects a change and calls
		1546	your callback, which does something. When there is another update within
		1547	the same second, C<ev_stat> will be unable to detect it.
		1548
		1549	The solution to this is to delay acting on a change for a second (or till
		1550	the next second boundary), using a roughly one-second delay C<ev_timer>
		1551	(C<ev_timer_set (w, 0., 1.01); ev_timer_again (loop, w)>). The C<.01>
		1552	is added to work around small timing inconsistencies of some operating
		1553	systems.
		1554
1463	=head3 Watcher-Specific Functions and Data Members	1555	=head3 Watcher-Specific Functions and Data Members
1464		1556
1465	=over 4	1557	=over 4
1466		1558
1467	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)	1559	=item ev_stat_init (ev_stat , callback, const char path, ev_tstamp interval)
…		…
1504	=item const char *path [read-only]	1596	=item const char *path [read-only]
1505		1597
1506	The filesystem path that is being watched.	1598	The filesystem path that is being watched.
1507		1599
1508	=back	1600	=back
		1601
		1602	=head3 Examples
1509		1603
1510	Example: Watch C</etc/passwd> for attribute changes.	1604	Example: Watch C</etc/passwd> for attribute changes.
1511		1605
1512	static void	1606	static void
1513	passwd_cb (struct ev_loop loop, ev_stat w, int revents)	1607	passwd_cb (struct ev_loop loop, ev_stat w, int revents)
…		…
1526	}	1620	}
1527		1621
1528	...	1622	...
1529	ev_stat passwd;	1623	ev_stat passwd;
1530		1624
1531	ev_stat_init (&passwd, passwd_cb, "/etc/passwd");	1625	ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
1532	ev_stat_start (loop, &passwd);	1626	ev_stat_start (loop, &passwd);
		1627
		1628	Example: Like above, but additionally use a one-second delay so we do not
		1629	miss updates (however, frequent updates will delay processing, too, so
		1630	one might do the work both on C<ev_stat> callback invocation I<and> on
		1631	C<ev_timer> callback invocation).
		1632
		1633	static ev_stat passwd;
		1634	static ev_timer timer;
		1635
		1636	static void
		1637	timer_cb (EV_P_ ev_timer *w, int revents)
		1638	{
		1639	ev_timer_stop (EV_A_ w);
		1640
		1641	/* now it's one second after the most recent passwd change */
		1642	}
		1643
		1644	static void
		1645	stat_cb (EV_P_ ev_stat *w, int revents)
		1646	{
		1647	/* reset the one-second timer */
		1648	ev_timer_again (EV_A_ &timer);
		1649	}
		1650
		1651	...
		1652	ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
		1653	ev_stat_start (loop, &passwd);
		1654	ev_timer_init (&timer, timer_cb, 0., 1.01);
1533		1655
1534		1656
1535	=head2 C<ev_idle> - when you've got nothing better to do...	1657	=head2 C<ev_idle> - when you've got nothing better to do...
1536		1658
1537	Idle watchers trigger events when no other events of the same or higher	1659	Idle watchers trigger events when no other events of the same or higher
…		…
1562	Initialises and configures the idle watcher - it has no parameters of any	1684	Initialises and configures the idle watcher - it has no parameters of any
1563	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,	1685	kind. There is a C<ev_idle_set> macro, but using it is utterly pointless,
1564	believe me.	1686	believe me.
1565		1687
1566	=back	1688	=back
		1689
		1690	=head3 Examples
1567		1691
1568	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the	1692	Example: Dynamically allocate an C<ev_idle> watcher, start it, and in the
1569	callback, free it. Also, use no error checking, as usual.	1693	callback, free it. Also, use no error checking, as usual.
1570		1694
1571	static void	1695	static void
…		…
1623		1747
1624	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)	1748	It is recommended to give C<ev_check> watchers highest (C<EV_MAXPRI>)
1625	priority, to ensure that they are being run before any other watchers	1749	priority, to ensure that they are being run before any other watchers
1626	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,	1750	after the poll. Also, C<ev_check> watchers (and C<ev_prepare> watchers,
1627	too) should not activate ("feed") events into libev. While libev fully	1751	too) should not activate ("feed") events into libev. While libev fully
1628	supports this, they will be called before other C<ev_check> watchers did	1752	supports this, they will be called before other C<ev_check> watchers
1629	their job. As C<ev_check> watchers are often used to embed other event	1753	did their job. As C<ev_check> watchers are often used to embed other
1630	loops those other event loops might be in an unusable state until their	1754	(non-libev) event loops those other event loops might be in an unusable
1631	C<ev_check> watcher ran (always remind yourself to coexist peacefully with	1755	state until their C<ev_check> watcher ran (always remind yourself to
1632	others).	1756	coexist peacefully with others).
1633		1757
1634	=head3 Watcher-Specific Functions and Data Members	1758	=head3 Watcher-Specific Functions and Data Members
1635		1759
1636	=over 4	1760	=over 4
1637		1761
…		…
1642	Initialises and configures the prepare or check watcher - they have no	1766	Initialises and configures the prepare or check watcher - they have no
1643	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>	1767	parameters of any kind. There are C<ev_prepare_set> and C<ev_check_set>
1644	macros, but using them is utterly, utterly and completely pointless.	1768	macros, but using them is utterly, utterly and completely pointless.
1645		1769
1646	=back	1770	=back
		1771
		1772	=head3 Examples
1647		1773
1648	There are a number of principal ways to embed other event loops or modules	1774	There are a number of principal ways to embed other event loops or modules
1649	into libev. Here are some ideas on how to include libadns into libev	1775	into libev. Here are some ideas on how to include libadns into libev
1650	(there is a Perl module named C<EV::ADNS> that does this, which you could	1776	(there is a Perl module named C<EV::ADNS> that does this, which you could
1651	use for an actually working example. Another Perl module named C<EV::Glib>	1777	use for an actually working example. Another Perl module named C<EV::Glib>
…		…
1776	=head2 C<ev_embed> - when one backend isn't enough...	1902	=head2 C<ev_embed> - when one backend isn't enough...
1777		1903
1778	This is a rather advanced watcher type that lets you embed one event loop	1904	This is a rather advanced watcher type that lets you embed one event loop
1779	into another (currently only C<ev_io> events are supported in the embedded	1905	into another (currently only C<ev_io> events are supported in the embedded
1780	loop, other types of watchers might be handled in a delayed or incorrect	1906	loop, other types of watchers might be handled in a delayed or incorrect
1781	fashion and must not be used). (See portability notes, below).	1907	fashion and must not be used).
1782		1908
1783	There are primarily two reasons you would want that: work around bugs and	1909	There are primarily two reasons you would want that: work around bugs and
1784	prioritise I/O.	1910	prioritise I/O.
1785		1911
1786	As an example for a bug workaround, the kqueue backend might only support	1912	As an example for a bug workaround, the kqueue backend might only support
…		…
1820	portable one.	1946	portable one.
1821		1947
1822	So when you want to use this feature you will always have to be prepared	1948	So when you want to use this feature you will always have to be prepared
1823	that you cannot get an embeddable loop. The recommended way to get around	1949	that you cannot get an embeddable loop. The recommended way to get around
1824	this is to have a separate variables for your embeddable loop, try to	1950	this is to have a separate variables for your embeddable loop, try to
1825	create it, and if that fails, use the normal loop for everything:	1951	create it, and if that fails, use the normal loop for everything.
		1952
		1953	=head3 Watcher-Specific Functions and Data Members
		1954
		1955	=over 4
		1956
		1957	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
		1958
		1959	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
		1960
		1961	Configures the watcher to embed the given loop, which must be
		1962	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
		1963	invoked automatically, otherwise it is the responsibility of the callback
		1964	to invoke it (it will continue to be called until the sweep has been done,
		1965	if you do not want thta, you need to temporarily stop the embed watcher).
		1966
		1967	=item ev_embed_sweep (loop, ev_embed *)
		1968
		1969	Make a single, non-blocking sweep over the embedded loop. This works
		1970	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
		1971	apropriate way for embedded loops.
		1972
		1973	=item struct ev_loop *other [read-only]
		1974
		1975	The embedded event loop.
		1976
		1977	=back
		1978
		1979	=head3 Examples
		1980
		1981	Example: Try to get an embeddable event loop and embed it into the default
		1982	event loop. If that is not possible, use the default loop. The default
		1983	loop is stored in C<loop_hi>, while the mebeddable loop is stored in
		1984	C<loop_lo> (which is C<loop_hi> in the acse no embeddable loop can be
		1985	used).
1826		1986
1827	struct ev_loop *loop_hi = ev_default_init (0);	1987	struct ev_loop *loop_hi = ev_default_init (0);
1828	struct ev_loop *loop_lo = 0;	1988	struct ev_loop *loop_lo = 0;
1829	struct ev_embed embed;	1989	struct ev_embed embed;
1830		1990
…		…
1841	ev_embed_start (loop_hi, &embed);	2001	ev_embed_start (loop_hi, &embed);
1842	}	2002	}
1843	else	2003	else
1844	loop_lo = loop_hi;	2004	loop_lo = loop_hi;
1845		2005
1846	=head2 Portability notes	2006	Example: Check if kqueue is available but not recommended and create
		2007	a kqueue backend for use with sockets (which usually work with any
		2008	kqueue implementation). Store the kqueue/socket-only event loop in
		2009	C<loop_socket>. (One might optionally use C<EVFLAG_NOENV>, too).
1847		2010
1848	Kqueue is nominally embeddable, but this is broken on all BSDs that I	2011	struct ev_loop *loop = ev_default_init (0);
1849	tried, in various ways. Usually the embedded event loop will simply never	2012	struct ev_loop *loop_socket = 0;
1850	receive events, sometimes it will only trigger a few times, sometimes in a	2013	struct ev_embed embed;
1851	loop. Epoll is also nominally embeddable, but many Linux kernel versions	2014
1852	will always eport the epoll fd as ready, even when no events are pending.	2015	if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
		2016	if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
		2017	{
		2018	ev_embed_init (&embed, 0, loop_socket);
		2019	ev_embed_start (loop, &embed);
		2020	}
1853		2021
1854	While libev allows embedding these backends (they are contained in	2022	if (!loop_socket)
1855	C<ev_embeddable_backends ()>), take extreme care that it will actually	2023	loop_socket = loop;
1856	work.
1857		2024
1858	When in doubt, create a dynamic event loop forced to use sockets (this	2025	// now use loop_socket for all sockets, and loop for everything else
1859	usually works) and possibly another thread and a pipe or so to report to
1860	your main event loop.
1861
1862	=head3 Watcher-Specific Functions and Data Members
1863
1864	=over 4
1865
1866	=item ev_embed_init (ev_embed , callback, struct ev_loop embedded_loop)
1867
1868	=item ev_embed_set (ev_embed , callback, struct ev_loop embedded_loop)
1869
1870	Configures the watcher to embed the given loop, which must be
1871	embeddable. If the callback is C<0>, then C<ev_embed_sweep> will be
1872	invoked automatically, otherwise it is the responsibility of the callback
1873	to invoke it (it will continue to be called until the sweep has been done,
1874	if you do not want thta, you need to temporarily stop the embed watcher).
1875
1876	=item ev_embed_sweep (loop, ev_embed *)
1877
1878	Make a single, non-blocking sweep over the embedded loop. This works
1879	similarly to C<ev_loop (embedded_loop, EVLOOP_NONBLOCK)>, but in the most
1880	apropriate way for embedded loops.
1881
1882	=item struct ev_loop *other [read-only]
1883
1884	The embedded event loop.
1885
1886	=back
1887		2026
1888		2027
1889	=head2 C<ev_fork> - the audacity to resume the event loop after a fork	2028	=head2 C<ev_fork> - the audacity to resume the event loop after a fork
1890		2029
1891	Fork watchers are called when a C<fork ()> was detected (usually because	2030	Fork watchers are called when a C<fork ()> was detected (usually because
…		…
2370	wants osf handles on win32 (this is the case when the select to	2509	wants osf handles on win32 (this is the case when the select to
2371	be used is the winsock select). This means that it will call	2510	be used is the winsock select). This means that it will call
2372	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,	2511	C<_get_osfhandle> on the fd to convert it to an OS handle. Otherwise,
2373	it is assumed that all these functions actually work on fds, even	2512	it is assumed that all these functions actually work on fds, even
2374	on win32. Should not be defined on non-win32 platforms.	2513	on win32. Should not be defined on non-win32 platforms.
		2514
		2515	=item EV_FD_TO_WIN32_HANDLE
		2516
		2517	If C<EV_SELECT_IS_WINSOCKET> is enabled, then libev needs a way to map
		2518	file descriptors to socket handles. When not defining this symbol (the
		2519	default), then libev will call C<_get_osfhandle>, which is usually
		2520	correct. In some cases, programs use their own file descriptor management,
		2521	in which case they can provide this function to map fds to socket handles.
2375		2522
2376	=item EV_USE_POLL	2523	=item EV_USE_POLL
2377		2524
2378	If defined to be C<1>, libev will compile in support for the C<poll>(2)	2525	If defined to be C<1>, libev will compile in support for the C<poll>(2)
2379	backend. Otherwise it will be enabled on non-win32 platforms. It	2526	backend. Otherwise it will be enabled on non-win32 platforms. It
…		…
2416	be detected at runtime.	2563	be detected at runtime.
2417		2564
2418	=item EV_H	2565	=item EV_H
2419		2566
2420	The name of the F<ev.h> header file used to include it. The default if	2567	The name of the F<ev.h> header file used to include it. The default if
2421	undefined is C<< <ev.h> >> in F<event.h> and C<"ev.h"> in F<ev.c>. This	2568	undefined is C<"ev.h"> in F<event.h>, F<ev.c> and F<ev++.h>. This can be
2422	can be used to virtually rename the F<ev.h> header file in case of conflicts.	2569	used to virtually rename the F<ev.h> header file in case of conflicts.
2423		2570
2424	=item EV_CONFIG_H	2571	=item EV_CONFIG_H
2425		2572
2426	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override	2573	If C<EV_STANDALONE> isn't C<1>, this variable can be used to override
2427	F<ev.c>'s idea of where to find the F<config.h> file, similarly to	2574	F<ev.c>'s idea of where to find the F<config.h> file, similarly to
2428	C<EV_H>, above.	2575	C<EV_H>, above.
2429		2576
2430	=item EV_EVENT_H	2577	=item EV_EVENT_H
2431		2578
2432	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea	2579	Similarly to C<EV_H>, this macro can be used to override F<event.c>'s idea
2433	of how the F<event.h> header can be found.	2580	of how the F<event.h> header can be found, the default is C<"event.h">.
2434		2581
2435	=item EV_PROTOTYPES	2582	=item EV_PROTOTYPES
2436		2583
2437	If defined to be C<0>, then F<ev.h> will not define any function	2584	If defined to be C<0>, then F<ev.h> will not define any function
2438	prototypes, but still define all the structs and other symbols. This is	2585	prototypes, but still define all the structs and other symbols. This is
…		…
2504	than enough. If you need to manage thousands of children you might want to	2651	than enough. If you need to manage thousands of children you might want to
2505	increase this value (I<must> be a power of two).	2652	increase this value (I<must> be a power of two).
2506		2653
2507	=item EV_INOTIFY_HASHSIZE	2654	=item EV_INOTIFY_HASHSIZE
2508		2655
2509	C<ev_staz> watchers use a small hash table to distribute workload by	2656	C<ev_stat> watchers use a small hash table to distribute workload by
2510	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),	2657	inotify watch id. The default size is C<16> (or C<1> with C<EV_MINIMAL>),
2511	usually more than enough. If you need to manage thousands of C<ev_stat>	2658	usually more than enough. If you need to manage thousands of C<ev_stat>
2512	watchers you might want to increase this value (I<must> be a power of	2659	watchers you might want to increase this value (I<must> be a power of
2513	two).	2660	two).
2514		2661
…		…
2610		2757
2611	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)	2758	=item Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
2612		2759
2613	This means that, when you have a watcher that triggers in one hour and	2760	This means that, when you have a watcher that triggers in one hour and
2614	there are 100 watchers that would trigger before that then inserting will	2761	there are 100 watchers that would trigger before that then inserting will
2615	have to skip those 100 watchers.	2762	have to skip roughly seven (C<ld 100>) of these watchers.
2616		2763
2617	=item Changing timer/periodic watchers (by autorepeat, again): O(log skipped_other_timers)	2764	=item Changing timer/periodic watchers (by autorepeat or calling again): O(log skipped_other_timers)
2618		2765
2619	That means that for changing a timer costs less than removing/adding them	2766	That means that changing a timer costs less than removing/adding them
2620	as only the relative motion in the event queue has to be paid for.	2767	as only the relative motion in the event queue has to be paid for.
2621		2768
2622	=item Starting io/check/prepare/idle/signal/child watchers: O(1)	2769	=item Starting io/check/prepare/idle/signal/child watchers: O(1)
2623		2770
2624	These just add the watcher into an array or at the head of a list.	2771	These just add the watcher into an array or at the head of a list.
		2772
2625	=item Stopping check/prepare/idle watchers: O(1)	2773	=item Stopping check/prepare/idle watchers: O(1)
2626		2774
2627	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))	2775	=item Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid % EV_PID_HASHSIZE))
2628		2776
2629	These watchers are stored in lists then need to be walked to find the	2777	These watchers are stored in lists then need to be walked to find the
2630	correct watcher to remove. The lists are usually short (you don't usually	2778	correct watcher to remove. The lists are usually short (you don't usually
2631	have many watchers waiting for the same fd or signal).	2779	have many watchers waiting for the same fd or signal).
2632		2780
2633	=item Finding the next timer per loop iteration: O(1)	2781	=item Finding the next timer in each loop iteration: O(1)
		2782
		2783	By virtue of using a binary heap, the next timer is always found at the
		2784	beginning of the storage array.
2634		2785
2635	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)	2786	=item Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
2636		2787
2637	A change means an I/O watcher gets started or stopped, which requires	2788	A change means an I/O watcher gets started or stopped, which requires
2638	libev to recalculate its status (and possibly tell the kernel).	2789	libev to recalculate its status (and possibly tell the kernel, depending
		2790	on backend and wether C<ev_io_set> was used).
2639		2791
2640	=item Activating one watcher: O(1)	2792	=item Activating one watcher (putting it into the pending state): O(1)
2641		2793
2642	=item Priority handling: O(number_of_priorities)	2794	=item Priority handling: O(number_of_priorities)
2643		2795
2644	Priorities are implemented by allocating some space for each	2796	Priorities are implemented by allocating some space for each
2645	priority. When doing priority-based operations, libev usually has to	2797	priority. When doing priority-based operations, libev usually has to
2646	linearly search all the priorities.	2798	linearly search all the priorities, but starting/stopping and activating
		2799	watchers becomes O(1) w.r.t. prioritiy handling.
2647		2800
2648	=back	2801	=back
2649		2802
2650		2803
		2804	=head1 Win32 platform limitations and workarounds
		2805
		2806	Win32 doesn't support any of the standards (e.g. POSIX) that libev
		2807	requires, and its I/O model is fundamentally incompatible with the POSIX
		2808	model. Libev still offers limited functionality on this platform in
		2809	the form of the C<EVBACKEND_SELECT> backend, and only supports socket
		2810	descriptors. This only applies when using Win32 natively, not when using
		2811	e.g. cygwin.
		2812
		2813	There is no supported compilation method available on windows except
		2814	embedding it into other applications.
		2815
		2816	Due to the many, low, and arbitrary limits on the win32 platform and the
		2817	abysmal performance of winsockets, using a large number of sockets is not
		2818	recommended (and not reasonable). If your program needs to use more than
		2819	a hundred or so sockets, then likely it needs to use a totally different
		2820	implementation for windows, as libev offers the POSIX model, which cannot
		2821	be implemented efficiently on windows (microsoft monopoly games).
		2822
		2823	=over 4
		2824
		2825	=item The winsocket select function
		2826
		2827	The winsocket C<select> function doesn't follow POSIX in that it requires
		2828	socket I<handles> and not socket I<file descriptors>. This makes select
		2829	very inefficient, and also requires a mapping from file descriptors
		2830	to socket handles. See the discussion of the C<EV_SELECT_USE_FD_SET>,
		2831	C<EV_SELECT_IS_WINSOCKET> and C<EV_FD_TO_WIN32_HANDLE> preprocessor
		2832	symbols for more info.
		2833
		2834	The configuration for a "naked" win32 using the microsoft runtime
		2835	libraries and raw winsocket select is:
		2836
		2837	#define EV_USE_SELECT 1
		2838	#define EV_SELECT_IS_WINSOCKET 1 /* forces EV_SELECT_USE_FD_SET, too */
		2839
		2840	Note that winsockets handling of fd sets is O(n), so you can easily get a
		2841	complexity in the O(n²) range when using win32.
		2842
		2843	=item Limited number of file descriptors
		2844
		2845	Windows has numerous arbitrary (and low) limits on things. Early versions
		2846	of winsocket's select only supported waiting for a max. of C<64> handles
		2847	(probably owning to the fact that all windows kernels can only wait for
		2848	C<64> things at the same time internally; microsoft recommends spawning a
		2849	chain of threads and wait for 63 handles and the previous thread in each).
		2850
		2851	Newer versions support more handles, but you need to define C<FD_SETSIZE>
		2852	to some high number (e.g. C<2048>) before compiling the winsocket select
		2853	call (which might be in libev or elsewhere, for example, perl does its own
		2854	select emulation on windows).
		2855
		2856	Another limit is the number of file descriptors in the microsoft runtime
		2857	libraries, which by default is C<64> (there must be a hidden I<64> fetish
		2858	or something like this inside microsoft). You can increase this by calling
		2859	C<_setmaxstdio>, which can increase this limit to C<2048> (another
		2860	arbitrary limit), but is broken in many versions of the microsoft runtime
		2861	libraries.
		2862
		2863	This might get you to about C<512> or C<2048> sockets (depending on
		2864	windows version and/or the phase of the moon). To get more, you need to
		2865	wrap all I/O functions and provide your own fd management, but the cost of
		2866	calling select (O(n²)) will likely make this unworkable.
		2867
		2868	=back
		2869
		2870
2651	=head1 AUTHOR	2871	=head1 AUTHOR
2652		2872
2653	Marc Lehmann <libev@schmorp.de>.	2873	Marc Lehmann <libev@schmorp.de>.
2654		2874

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing libev/ev.pod (file contents): Revision 1.99 by root, Sat Dec 22 06:16:36 2007 UTC vs. Revision 1.118 by root, Thu Jan 10 06:00:55 2008 UTC

Diff Legend

Comparing libev/ev.pod (file contents):
Revision 1.99 by root, Sat Dec 22 06:16:36 2007 UTC vs.
Revision 1.118 by root, Thu Jan 10 06:00:55 2008 UTC