--- rxvt-unicode/README.FAQ 2005/01/11 02:24:59 1.1 +++ rxvt-unicode/README.FAQ 2006/01/16 14:48:39 1.29 @@ -1,7 +1,190 @@ FREQUENTLY ASKED QUESTIONS + The new selection selects pieces that are too big, how can I select + single words? + Yes. For example, if you want to select alphanumeric words, you can + use the following resource: + + URxvt.selection.pattern-0: ([[:word:]]+) + + If you click more than twice, the selection will be extended more + and more. + + To get a selection that is very similar to the old code, try this + pattern: + + URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+) + + Please also note that the *LeftClick Shift-LeftClik* combination + also selects words like the old code. + + I don't like the new selection/popups/hotkeys/perl, how do I + change/disable it? + You can disable the perl extension completely by setting the + perl-ext-common resource to the empty string, which also keeps + rxvt-unicode from initialising perl, saving memory. + + If you only want to disable specific features, you first have to + identify which perl extension is responsible. For this, read the + section PREPACKAGED EXTENSIONS in the rxvtperl(3) manpage. For + example, to disable the selection-popup and option-popup, specify + this perl-ext-common resource: + + URxvt.perl-ext-common: default,-selection-popup,-option-popup + + This will keep the default extensions, but disable the two popup + extensions. Some extensions can also be configured, for example, + scrollback search mode is triggered by M-s. You can move it to any + other combination either by setting the searchable-scrollback + resource: + + URxvt.searchable-scrollback: CM-s + + Isn't rxvt supposed to be small? Don't all those features bloat? + I often get asked about this, and I think, no, they didn't cause + extra bloat. If you compare a minimal rxvt and a minimal urxvt, you + can see that the urxvt binary is larger (due to some encoding tables + always being compiled in), but it actually uses less memory (RSS) + after startup. Even with "--disable-everything", this comparison is + a bit unfair, as many features unique to urxvt (locale, encoding + conversion, iso14755 etc.) are already in use in this mode. + + text data bss drs rss filename + 98398 1664 24 15695 1824 rxvt --disable-everything + 188985 9048 66616 18222 1788 urxvt --disable-everything + + When you "--enable-everything" (which _is_ unfair, as this involves + xft and full locale/XIM support which are quite bloaty inside libX11 + and my libc), the two diverge, but not unreasnobaly so. + + text data bss drs rss filename + 163431 2152 24 20123 2060 rxvt --enable-everything + 1035683 49680 66648 29096 3680 urxvt --enable-everything + + The very large size of the text section is explained by the + east-asian encoding tables, which, if unused, take up disk space but + nothing else and can be compiled out unless you rely on X11 core + fonts that use those encodings. The BSS size comes from the 64k + emergency buffer that my c++ compiler allocates (but of course + doesn't use unless you are out of memory). Also, using an xft font + instead of a core font immediately adds a few megabytes of RSS. Xft + indeed is responsible for a lot of RSS even when not used. + + Of course, due to every character using two or four bytes instead of + one, a large scrollback buffer will ultimately make rxvt-unicode use + more memory. + + Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), + this still fares rather well. And compared to some monsters like + gnome-terminal (21152k + extra 4204k in separate processes) or + konsole (22200k + extra 43180k in daemons that stay around after + exit, plus half a minute of startup time, including the hundreds of + warnings it spits out), it fares extremely well *g*. + + Why C++, isn't that unportable/bloated/uncool? + Is this a question? :) It comes up very often. The simple answer is: + I had to write it, and C++ allowed me to write and maintain it in a + fraction of the time and effort (which is a scarce resource for me). + Put even shorter: It simply wouldn't exist without C++. + + My personal stance on this is that C++ is less portable than C, but + in the case of rxvt-unicode this hardly matters, as its portability + limits are defined by things like X11, pseudo terminals, locale + support and unix domain sockets, which are all less portable than + C++ itself. + + Regarding the bloat, see the above question: It's easy to write + programs in C that use gobs of memory, an certainly possible to + write programs in C++ that don't. C++ also often comes with large + libraries, but this is not necessarily the case with GCC. Here is + what rxvt links against on my system with a minimal config: + + libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) + libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000) + libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000) + /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) + + And here is rxvt-unicode: + + libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) + libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000) + libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000) + libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000) + /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) + + No large bloated libraries (of course, none were linked in + statically), except maybe libX11 :) + + Does it support tabs, can I have a tabbed rxvt-unicode? + rxvt-unicode does not directly support tabs. It will work fine with + tabbing functionality of many window managers or similar tabbing + programs, and its embedding-features allow it to be embedded into + other programs, as witnessed by doc/rxvt-tabbed or the upcoming + "Gtk2::URxvt" perl module, which features a tabbed urxvt (murxvt) + terminal as an example embedding application. + How do I know which rxvt-unicode version I'm using? The version number is displayed with the usage (-h). Also the escape - sequence "ESC[8n" sets the window title to the version number. + sequence "ESC [ 8 n" sets the window title to the version number. + When using the rxvtc client, the version displayed is that of the + daemon. + + I am using Debian GNU/Linux and have a problem... + The Debian GNU/Linux package of rxvt-unicode in sarge contains large + patches that considerably change the behaviour of rxvt-unicode. + Before reporting a bug to the original rxvt-unicode author please + download and install the genuine version + () and try to reproduce the + problem. If you cannot, chances are that the problems are specific + to Debian GNU/Linux, in which case it should be reported via the + Debian Bug Tracking System (use "reportbug" to report the bug). + + For other problems that also affect the Debian package, you can and + probably should use the Debian BTS, too, because, after all, it's + also a bug in the Debian version and it serves as a reminder for + other users that might encounter the same issue. + + I am maintaining rxvt-unicode for distribution/OS XXX, any + recommendation? + You should build one binary with the default options. configure now + enables most useful options, and the trend goes to making them + runtime-switchable, too, so there is usually no drawback to enbaling + them, except higher disk and possibly memory usage. The perl + interpreter should be enabled, as important functionality (menus, + selection, likely more in the future) depends on it. + + You should not overwrite the "perl-ext-common" snd "perl-ext" + resources system-wide (except maybe with "defaults"). This will + result in useful behaviour. If your distribution aims at low memory, + add an empty "perl-ext-common" resource to the app-defaults file. + This will keep the perl interpreter disabled until the user enables + it. + + If you can/want build more binaries, I recommend building a minimal + one with "--disable-everything" (very useful) and a maximal one with + "--enable-everything" (less useful, it will be very big due to a lot + of encodings built-in that increase download times and are rarely + used). + + I need to make it setuid/setgid to support utmp/ptys on my OS, is this + safe? + Likely not. While I honestly try to make it secure, and am probably + not bad at it, I think it is simply unreasonable to expect all of + freetype + fontconfig + xft + xlib + perl + ... + rxvt-unicode + itself to all be secure. Also, rxvt-unicode disables some options + when it detects that it runs setuid or setgid, which is not nice. + Besides, with the embedded perl interpreter the possibility for + security problems easily multiplies. + + Elevated privileges are only required for utmp and pty operations on + some systems (for example, GNU/Linux doesn't need any extra + privileges for ptys, but some need it for utmp support). It is + planned to mvoe this into a forked handler process, but this is not + yet done. + + So, while setuid/setgid operation is supported and not a problem on + your typical single-user-no-other-logins unix desktop, always + remember that its an awful lot of code, most of which isn't checked + for security issues regularly. When I log-in to another system it tells me about missing terminfo data? The terminal description used by rxvt-unicode is not as widely @@ -23,41 +206,53 @@ applications. It's a nice quick-and-dirty workaround for rare cases, though. - If you always want to do this you can either recompile rxvt-unicode - with the desired TERM value or use a resource to set it: + If you always want to do this (and are fine with the consequences) + you can either recompile rxvt-unicode with the desired TERM value or + use a resource to set it: URxvt.termName: rxvt If you don't plan to use rxvt (quite common...) you could also replace the rxvt terminfo file with the rxvt-unicode one. + "tic" outputs some error when compiling the terminfo entry. + Most likely it's the empty definition for "enacs=". Just replace it + by "enacs=\E[0@" and try again. + + "bash"'s readline does not work correctly under rxvt. I need a termcap file entry. + One reason you might want this is that some distributions or + operating systems still compile some programs using the + long-obsoleted termcap library (Fedora Core's bash is one example) + and rely on a termcap entry for "rxvt-unicode". + You could use rxvt's termcap entry with resonable results in many cases. You can also create a termcap entry by using terminfo's infocmp program like this: infocmp -C rxvt-unicode - OR you could this termcap entry: + Or you could use this termcap entry, generated by the command above: rxvt-unicode|rxvt-unicode terminal (X Window System):\ :am:bw:eo:km:mi:ms:xn:xo:\ - :co#80:it#8:li#24:\ + :co#80:it#8:li#24:lm#0:\ :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ - :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\ - :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ - :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ - :ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\ - :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ - :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\ - :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ - :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\ - :ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ - :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ - :nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ - :st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\ - :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ + :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\ + :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ + :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\ + :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\ + :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\ + :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ + :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ + :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\ + :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\ + :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\ + :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\ + :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ + :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\ + :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ :vs=\E[?25h: Why does "ls" no longer have coloured output? @@ -86,6 +281,14 @@ log-in to another system it tells me about missing terminfo data? on how to do this). + My numerical keypad acts weird and generates differing output? + Some Debian GNUL/Linux users seem to have this problem, although no + specific details were reported so far. It is possible that this is + caused by the wrong "TERM" setting, although the details of wether + and how this can happen are unknown, as "TERM=rxvt" should offer a + compatible keymap. See the answer to the previous question, and + please report if that helped. + Rxvt-unicode does not seem to understand the selected encoding? Unicode does not seem to work? If you encounter strange problems like typing an accented character @@ -96,8 +299,8 @@ Rxvt-unicode must be started with the same "LC_CTYPE" setting as the programs. Often rxvt-unicode is started in the "C" locale, while the login script running within the rxvt-unicode window changes the - locale to sth. else, e.h. "en_GB.UTF-8". Needless to say, this is - not going to work. + locale to something else, e.g. "en_GB.UTF-8". Needless to say, this + is not going to work. The best thing is to fix your startup environment, as you will likely run into other problems. If nothing works you can try this in @@ -107,7 +310,9 @@ If this doesn't work, then maybe you use a "LC_CTYPE" specification not supported on your systems. Some systems have a "locale" command - which displays this. If it displays sth. like: + which displays this (also, "perl -e0" can be used to check locale + settings, as it will complain loudly if it cannot set the locale). + If it displays something like: locale: Cannot set LC_CTYPE to default locale: ... @@ -125,12 +330,12 @@ want to display. rxvt-unicode makes a best-effort try at finding a replacement font. - Often the result is fine, but sometimes the chosen font looks bad. - Many fonts have totally strange characters that don't resemble the - correct glyph at all, and rxvt-unicode lacks the artificial - intelligence to detect that a specific glyph is wrong: it has to - believe the font that the characters it contains indeed look - correct. + Often the result is fine, but sometimes the chosen font looks + bad/ugly/wrong. Some fonts have totally strange characters that + don't resemble the correct glyph at all, and rxvt-unicode lacks the + artificial intelligence to detect that a specific glyph is wrong: it + has to believe the font that the characters it claims to contain + indeed look correct. In that case, select a font of your taste and add it to the font list, e.g.: @@ -143,20 +348,21 @@ up this search and use less resources within rxvt-unicode and the X-server. - The only limitation is that all the fonts must not be larger than - the base font, as the base font defines the principal cell size, - which must be the same due to the way terminals work. + The only limitation is that none of the fonts may be larger than the + base font, as the base font defines the terminal character cell + size, which must be the same due to the way terminals work. Why do some chinese characters look so different than others? This is because there is a difference between script and language -- rxvt-unicode does not know which language the text that is output is, as it only knows the unicode character codes. If rxvt-unicode - first sees a japanese character, it might choose a japanese font for - it. Subsequent japanese characters will take that font. Now, many - chinese characters aren't represented in japanese fonts, so when the - first non-japanese character comes up, rxvt-unicode will look for a - chinese font -- unfortunately at this point, it will still use the - japanese font for japanese characters that are also chinese. + first sees a japanese/chinese character, it might choose a japanese + font for display. Subsequent japanese characters will use that font. + Now, many chinese characters aren't represented in japanese fonts, + so when the first non-japanese character comes up, rxvt-unicode will + look for a chinese font -- unfortunately at this point, it will + still use the japanese font for chinese characters that are also in + the japanese font. The workaround is easy: just tag a chinese font at the end of your font list (see the previous question). The key is to view the font @@ -164,10 +370,13 @@ japanese font first. If you expect more chinese, put a chinese font first. - In the future it might be possible to switch preferences at runtime - (the internal data structure has no problem with using different - fonts for the same character at the same time, but no interface for - this has been designed yet). + In the future it might be possible to switch language preferences at + runtime (the internal data structure has no problem with using + different fonts for the same character at the same time, but no + interface for this has been designed yet). + + Until then, you might get away with switching fonts at runtime (see + "Can I switch the fonts at runtime?" later in this document). Why does rxvt-unicode sometimes leave pixel droppings? Most fonts were not designed for terminal use, which means that @@ -191,6 +400,13 @@ All of this is not a problem when using X11 core fonts, as their bounding box data is correct. + On Solaris 9, many line-drawing characters are too wide. + Seems to be a known bug, read + . Some people use the + following ugly workaround to get non-double-wide-characters working: + + #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x) + My Compose (Multi_key) key is no longer working. The most common causes for this are that either your locale is not set correctly, or you specified a preeditStyle that is not supported @@ -211,23 +427,24 @@ telnet escape character and so on. How can I keep rxvt-unicode from using reverse video so much? - First of all, make sure you are running with the right terminfo - ("urxvt"), which will get rid of most of these effects. Then make - sure you have specified colours for italic and bold, as otherwise - rxvt-unicode might use reverse video to simulate the effect: + First of all, make sure you are running with the right terminal + settings ("TERM=rxvt-unicode"), which will get rid of most of these + effects. Then make sure you have specified colours for italic and + bold, as otherwise rxvt-unicode might use reverse video to simulate + the effect: - URxvt*colorBD: white - URxvt*colorIT: green + URxvt.colorBD: white + URxvt.colorIT: green Some programs assume totally weird colours (red instead of blue), how can I fix that? - For some unexplainable reason, some programs (i.e. irssi) assume a - very weird colour palette when confronted with a terminal with more - than the standard 8 colours (rxvt-unicode supports 88). The right - fix is, of course, to fix these programs not to assume non-ISO - colours without very good reasons. + For some unexplainable reason, some rare programs assume a very + weird colour palette when confronted with a terminal with more than + the standard 8 colours (rxvt-unicode supports 88). The right fix is, + of course, to fix these programs not to assume non-ISO colours + without very good reasons. - In the meantime, you can either edit your "urxvt" terminfo + In the meantime, you can either edit your "rxvt-unicode" terminfo definition to only claim 8 colour support or use "TERM=rxvt", which will fix colours but keep you from using other rxvt-unicode features. @@ -240,15 +457,19 @@ As you might have guessed, FreeBSD does neither define this symobl nor does it support it. Instead, it uses it's own internal - representation of wchar_t. This is, of course, completely legal. + representation of wchar_t. This is, of course, completely fine with + respect to standards. - However, "__STDC_ISO_10646__" is the only sane way to support - multi-language apps in an OS, as using a locale-dependent (and - non-standardized) representation of wchar_t makes it impossible to - convert between wchar_t (as used by X11 and your applications) and - any other encoding without implementing OS-specific-wrappers for - each and every locale. There simply are no APIs to convert wchar_t - into anything except the current locale encoding. + However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" + and "UTF-8" locales under FreeBSD (which all use Unicode as wchar_t. + + "__STDC_ISO_10646__" is the only sane way to support multi-language + apps in an OS, as using a locale-dependent (and non-standardized) + representation of wchar_t makes it impossible to convert between + wchar_t (as used by X11 and your applications) and any other + encoding without implementing OS-specific-wrappers for each and + every locale. There simply are no APIs to convert wchar_t into + anything except the current locale encoding. Some applications (such as the formidable mlterm) work around this by carrying their own replacement functions for character set @@ -259,7 +480,23 @@ The rxvt-unicode author insists that the right way to fix this is in the system libraries once and for all, instead of forcing every app - to carry complete replacements. + to carry complete replacements for them :) + + I use Solaris 9 and it doesn't compile/work/etc. + Try the diff in doc/solaris9.patch as a base. It fixes the worst + problems with "wcwidth" and a compile problem. + + How can I use rxvt-unicode under cygwin? + rxvt-unicode should compile and run out of the box on cygwin, using + the X11 libraries that come with cygwin. libW11 emulation is no + longer supported (and makes no sense, either, as it only supported a + single font). I recommend starting the X-server in "-multiwindow" or + "-rootless" mode instead, which will result in similar look&feel as + the old libW11 emulation. + + At the time of this writing, cygwin didn't seem to support any + multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are + likely limited to 8-bit encodings. How does rxvt-unicode determine the encoding to use? Is there an option to switch encodings? @@ -272,6 +509,9 @@ selecting the encoding, doing I/O and (most important) communicating this to all applications so everybody agrees on character properties such as width and code number. This mechanism is the *locale*. + Applications not using that info will have problems (for example, + "xterm" gets the width of characters wrong as it uses it's own, + locale-independent table under all locales). Rxvt-unicode uses the "LC_CTYPE" locale category to select encoding. All programs doing the same (that is, most) will automatically agree @@ -289,31 +529,37 @@ Rxvt-unicode ignores all other locale categories, and except for the encoding, ignores country or language-specific settings, i.e. - "de_DE.UTF-8" and "ja_JP.UTF-8" are the same for rxvt-unicode. + "de_DE.UTF-8" and "ja_JP.UTF-8" are the normally same to + rxvt-unicode. If you want to use a specific encoding you have to make sure you start rxvt-unicode with the correct "LC_CTYPE" category. Can I switch locales at runtime? - Yes, using an escape sequence. Try sth. like this, which sets + Yes, using an escape sequence. Try something like this, which sets rxvt-unicode's idea of "LC_CTYPE". printf '\e]701;%s\007' ja_JP.SJIS - See also the previous question. + See also the previous answer. Sometimes this capability is rather handy when you want to work in - one locale (e.g. "de_DE.UTF-8") but some programs don't support - UTF-8. For example, I use this script to start "xjdic", which first - switches to a locale supported by xjdic and back later: + one locale (e.g. "de_DE.UTF-8") but some programs don't support it + (e.g. UTF-8). For example, I use this script to start "xjdic", which + first switches to a locale supported by xjdic and back later: printf '\e]701;%s\007' ja_JP.SJIS xjdic -js printf '\e]701;%s\007' de_DE.UTF-8 + You can also use xterm's "luit" program, which usually works fine, + except for some locales where character width differs between + program- and rxvt-unicode-locales. + Can I switch the fonts at runtime? - Yes, using an escape sequence. Try sth. like this, which has the - same effect as using the "-fn" switch, and takes effect immediately: + Yes, using an escape sequence. Try something like this, which has + the same effect as using the "-fn" switch, and takes effect + immediately: printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic" @@ -326,11 +572,11 @@ Why do italic characters look as if clipped? Many fonts have difficulties with italic characters and hinting. For example, the otherwise very nicely hinted font "xft:Bitstream Vera - Sans Mono" completely fails in it's italic face. A workaround is to - enable freetype autohinting, i.e. like this: + Sans Mono" completely fails in it's italic face. A workaround might + be to enable freetype autohinting, i.e. like this: - URxvt*italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true - URxvt*boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true + URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true + URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true My input method wants but I want UTF-8, what can I do? You can specify separate locales for the input method and the rest @@ -343,13 +589,24 @@ be able to input characters outside "EUC-JP" in a normal way then, as your input method limits you. + Rxvt-unicode crashes when the X Input Method changes or exits. + Unfortunately, this is unavoidable, as the XIM protocol is racy by + design. Applications can avoid some crashes at the expense of memory + leaks, and Input Methods can avoid some crashes by careful ordering + at exit time. kinput2 (and derived input methods) generally + succeeds, while SCIM (or similar input methods) fails. In the end, + however, crashes cannot be completely avoided even if both sides + cooperate. + + So the only workaround is not to kill your Input Method Servers. + Rxvt-unicode uses gobs of memory, how can I reduce that? - Rxvt-unicode tries to obey the rule of not charging you for sth. you - don't use. One thing you should try is to configure out all settings - that you don't need, for example, Xft support is a resource hog by - design, when used. Compiling it out ensures that no Xft font will be - loaded accidentally when rxvt-unicode tries to find a font for your - characters. + Rxvt-unicode tries to obey the rule of not charging you for + something you don't use. One thing you should try is to configure + out all settings that you don't need, for example, Xft support is a + resource hog by design, when used. Compiling it out ensures that no + Xft font will be loaded accidentally when rxvt-unicode tries to find + a font for your characters. Also, many people (me included) like large windows and even larger scrollback buffers: Without "--enable-unicode3", rxvt-unicode will @@ -361,8 +618,8 @@ Can I speed up Xft rendering somehow? Yes, the most obvious way to speed it up is to avoid Xft entirely, as it is simply slow. If you still want Xft fonts you might try to - disable antialiasing (by appending ":antialiasing=false"), which - saves lots of memory and also speeds up rendering considerably. + disable antialiasing (by appending ":antialias=false"), which saves + lots of memory and also speeds up rendering considerably. Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? Rxvt-unicode will use whatever you specify as a font. If it needs to @@ -378,7 +635,7 @@ some editors prematurely may leave the mouse in mouse report mode. I've heard that tcsh may use mouse reporting unless it otherwise specified. A quick check is to see if cut/paste works when the Alt - or Shift keys are depressed. See rxvt(7) + or Shift keys are depressed. What's with this bold/blink stuff? If no bold colour is set via "colorBD:", bold will invert text using @@ -403,26 +660,26 @@ Here are values that are supposed to resemble a VGA screen, including the murky brown that passes for low-intensity yellow: - URxvt*color0: #000000 - URxvt*color1: #A80000 - URxvt*color2: #00A800 - URxvt*color3: #A8A800 - URxvt*color4: #0000A8 - URxvt*color5: #A800A8 - URxvt*color6: #00A8A8 - URxvt*color7: #A8A8A8 - - URxvt*color8: #000054 - URxvt*color9: #FF0054 - URxvt*color10: #00FF54 - URxvt*color11: #FFFF54 - URxvt*color12: #0000FF - URxvt*color13: #FF00FF - URxvt*color14: #00FFFF - URxvt*color15: #FFFFFF + URxvt.color0: #000000 + URxvt.color1: #A80000 + URxvt.color2: #00A800 + URxvt.color3: #A8A800 + URxvt.color4: #0000A8 + URxvt.color5: #A800A8 + URxvt.color6: #00A8A8 + URxvt.color7: #A8A8A8 + + URxvt.color8: #000054 + URxvt.color9: #FF0054 + URxvt.color10: #00FF54 + URxvt.color11: #FFFF54 + URxvt.color12: #0000FF + URxvt.color13: #FF00FF + URxvt.color14: #00FFFF + URxvt.color15: #FFFFFF - And here is a more complete set of non-standard colors described as - "pretty girly": + And here is a more complete set of non-standard colors described + (not by me) as "pretty girly". URxvt.cursorColor: #dc74d1 URxvt.pointerColor: #dc74d1 @@ -443,6 +700,10 @@ URxvt.color7: #e1dddd URxvt.color15: #e1dddd + How can I start rxvtd in a race-free way? + Try "rxvtd -f -o", which tells rxvtd to open the display, create the + listening socket and then fork. + What's with the strange Backspace/Delete key behaviour? Assuming that the physical Backspace key corresponds to the BackSpace keysym (not likely for Linux ... see the following @@ -470,7 +731,7 @@ $ stty erase ^? $ rxvt - Toggle with "ESC[36h" / "ESC[36l" as documented in rxvt(7). + Toggle with "ESC [ 36 h" / "ESC [ 36 l". For an existing rxvt-unicode: @@ -489,7 +750,8 @@ The Delete key is a another casualty of the ill-defined Backspace problem. To avoid confusion between the Backspace and Delete keys, the Delete key has been assigned an escape sequence to match the - vt100 for Execute (ESC[3~) and is in the supplied termcap/terminfo. + vt100 for Execute ("ESC [ 3 ~") and is in the supplied + termcap/terminfo. Some other Backspace problems: @@ -503,49 +765,33 @@ There are some compile-time selections available via configure. Unless you have run "configure" with the "--disable-resources" option you can use the `keysym' resource to alter the keystrings - associated with keysym 0xFF00 - 0xFFFF (function, cursor keys, etc). + associated with keysyms. + + Here's an example for a URxvt session started using "rxvt -name + URxvt" - Here's an example for a tn3270 session started using `rxvt -name - tn3270' + URxvt.keysym.Home: \033[1~ + URxvt.keysym.End: \033[4~ + URxvt.keysym.C-apostrophe: \033 + URxvt.keysym.C-slash: \033 + URxvt.keysym.C-semicolon: \033 + URxvt.keysym.C-grave: \033 + URxvt.keysym.C-comma: \033 + URxvt.keysym.C-period: \033 + URxvt.keysym.C-0x60: \033 + URxvt.keysym.C-Tab: \033 + URxvt.keysym.C-Return: \033 + URxvt.keysym.S-Return: \033 + URxvt.keysym.S-space: \033 + URxvt.keysym.M-Up: \033 + URxvt.keysym.M-Down: \033 + URxvt.keysym.M-Left: \033 + URxvt.keysym.M-Right: \033 + URxvt.keysym.M-C-0: list \033 + URxvt.keysym.M-C-a: list \033 + URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007 - !# ----- special uses ------: - ! tn3270 login, remap function and arrow keys. - tn3270*font: *clean-bold-*-*--15-* - - ! keysym - used by rxvt only - ! Delete - ^D - tn3270*keysym.0xFFFF: \004 - - ! Home - ^A - tn3270*keysym.0xFF50: \001 - ! Left - ^B - tn3270*keysym.0xFF51: \002 - ! Up - ^P - tn3270*keysym.0xFF52: \020 - ! Right - ^F - tn3270*keysym.0xFF53: \006 - ! Down - ^N - tn3270*keysym.0xFF54: \016 - ! End - ^E - tn3270*keysym.0xFF57: \005 - - ! F1 - F12 - tn3270*keysym.0xFFBE: \e1 - tn3270*keysym.0xFFBF: \e2 - tn3270*keysym.0xFFC0: \e3 - tn3270*keysym.0xFFC1: \e4 - tn3270*keysym.0xFFC2: \e5 - tn3270*keysym.0xFFC3: \e6 - tn3270*keysym.0xFFC4: \e7 - tn3270*keysym.0xFFC5: \e8 - tn3270*keysym.0xFFC6: \e9 - tn3270*keysym.0xFFC7: \e0 - tn3270*keysym.0xFFC8: \e- - tn3270*keysym.0xFFC9: \e= - - ! map Prior/Next to F7/F8 - tn3270*keysym.0xFF55: \e7 - tn3270*keysym.0xFF56: \e8 + See some more examples in the documentation for the keysym resource. I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the @@ -561,8 +807,8 @@ possible keyboard mappings, it is better to use `xmodmap' to remap the keys as required for your particular machine. - How do I distinguish if I'm running rxvt-unicode or a regular xterm? I - need this to decide about setting colors etc. + How do I distinguish wether I'm running rxvt-unicode or a regular xterm? + I need this to decide about setting colors etc. rxvt and rxvt-unicode always export the variable "COLORTERM", so you can check and see if that is set. Note that several programs, JED, slrn, Midnight Commander automatically check this variable to decide