ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/rxvt-unicode/README.FAQ

Comparing rxvt-unicode/README.FAQ (file contents):
Revision 1.38 by root, Tue Jan 31 01:42:21 2006 UTC vs.
Revision 1.56 by root, Tue Nov 4 23:00:43 2008 UTC

1	FREQUENTLY ASKED QUESTIONS	1	RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS
2	The new selection selects pieces that are too big, how can I select single words?	2	Meta, Features & Commandline Issues
3	If you want to select e.g. alphanumeric words, you can use the following	3	My question isn't answered here, can I ask a human?
4	setting:	4	Before sending me mail, you could go to IRC: "irc.freenode.net", channel
		5	"#rxvt-unicode" has some rxvt-unicode enthusiasts that might be
		6	interested in learning about new and exciting problems (but not FAQs :).
5		7
6	URxvt.selection.pattern-0: ([[:word:]]+)	8	I use Gentoo, and I have a problem...
		9	There are three big problems with Gentoo Linux: first of all, most if
		10	not all Gentoo systems are completely broken (missing or mismatched
		11	header files, broken compiler etc. are just the tip of the iceberg);
		12	secondly, the Gentoo maintainer thinks it is a good idea to add broken
		13	patches to the code; and lastly, it should be called Gentoo GNU/Linux.
7		14
8	If you click more than twice, the selection will be extended more and	15	For these reasons, it is impossible to support rxvt-unicode on Gentoo.
9	more.	16	Problems appearing on Gentoo systems will usually simply be ignored
		17	unless they can be reproduced on non-Gentoo systems.
10		18
11	To get a selection that is very similar to the old code, try this	19	Does it support tabs, can I have a tabbed rxvt-unicode?
12	pattern:	20	Beginning with version 7.3, there is a perl extension that implements a
		21	simple tabbed terminal. It is installed by default, so any of these
		22	should give you tabs:
13		23
14	URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)	24	urxvt -pe tabbed
15		25
16	Please also note that the *LeftClick Shift-LeftClik* combination also
17	selects words like the old code.
18
19	I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
20	You can disable the perl extension completely by setting the
21	perl-ext-common resource to the empty string, which also keeps
22	rxvt-unicode from initialising perl, saving memory.
23
24	If you only want to disable specific features, you first have to
25	identify which perl extension is responsible. For this, read the section
26	PREPACKAGED EXTENSIONS in the rxvtperl(3) manpage. For example, to
27	disable the selection-popup and option-popup, specify this
28	perl-ext-common resource:
29
30	URxvt.perl-ext-common: default,-selection-popup,-option-popup
31
32	This will keep the default extensions, but disable the two popup
33	extensions. Some extensions can also be configured, for example,
34	scrollback search mode is triggered by M-s. You can move it to any other
35	combination either by setting the searchable-scrollback resource:
36
37	URxvt.searchable-scrollback: CM-s
38
39	The cursor moves when selecting text in the current input line, how do I switch this off?
40	See next entry.
41
42	During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?
43	These are caused by the "readline" perl extension. Under normal
44	circumstances, it will move your cursor around when you click into the
45	line that contains it. It tries hard not to do this at the wrong moment,
46	but when running a program that doesn't parse cursor movements or in
47	some cases during rlogin sessions, it fails to detect this properly.
48
49	You can permamently switch this feature off by disabling the "readline"
50	extension:
51
52	URxvt.perl-ext-common: default,-readline	26	URxvt.perl-ext-common: default,tabbed
53		27
54	Why doesn't rxvt-unicode read my resources?	28	It will also work fine with tabbing functionality of many window
55	Well, why, indeed? It does, in a way very similar to other X	29	managers or similar tabbing programs, and its embedding-features allow
56	applications. Most importantly, this means that if you or your OS loads	30	it to be embedded into other programs, as witnessed by doc/rxvt-tabbed
57	resources into the X display (the right way to do it), rxvt-unicode will	31	or the upcoming "Gtk2::URxvt" perl module, which features a tabbed urxvt
58	ignore any resource files in your home directory. It will only read	32	(murxvt) terminal as an example embedding application.
59	$HOME/.Xdefaults when no resources are attached to the display.
60		33
61	If you have or use an $HOME/.Xresources file, chances are that resources	34	How do I know which rxvt-unicode version I'm using?
62	are loaded into your X-server. In this case, you have to re-login after	35	The version number is displayed with the usage (-h). Also the escape
63	every change (or run xrdb -merge $HOME/.Xresources).	36	sequence "ESC [ 8 n" sets the window title to the version number. When
		37	using the urxvtc client, the version displayed is that of the daemon.
64		38
65	Also consider the form resources have to use:	39	Rxvt-unicode uses gobs of memory, how can I reduce that?
		40	Rxvt-unicode tries to obey the rule of not charging you for something
		41	you don't use. One thing you should try is to configure out all settings
		42	that you don't need, for example, Xft support is a resource hog by
		43	design, when used. Compiling it out ensures that no Xft font will be
		44	loaded accidentally when rxvt-unicode tries to find a font for your
		45	characters.
66		46
67	URxvt.resource: value	47	Also, many people (me included) like large windows and even larger
		48	scrollback buffers: Without "--enable-unicode3", rxvt-unicode will use 6
		49	bytes per screen cell. For a 160x?? window this amounts to almost a
		50	kilobyte per line. A scrollback buffer of 10000 lines will then (if
		51	full) use 10 Megabytes of memory. With "--enable-unicode3" it gets
		52	worse, as rxvt-unicode then uses 8 bytes per screen cell.
68		53
69	If you want to use another form (there are lots of different ways of	54	How can I start urxvtd in a race-free way?
70	specifying resources), make sure you understand wether and why it works.	55	Try "urxvtd -f -o", which tells urxvtd to open the display, create the
71	If unsure, use the form above.	56	listening socket and then fork.
72		57
73	I can't get transparency working, what am I doing wrong?	58	How can I start urxvtd automatically when I run urxvtc?
74	First of all, transparency isn't officially supported in rxvt-unicode,	59	If you want to start urxvtd automatically whenever you run urxvtc and
75	so you are mostly on your own. Do not bug the author about it (but you	60	the daemon isn't running yet, use this script:
76	may bug everybody else). Also, if you can't get it working consider it a
77	rite of passage: ... and you failed.
78		61
79	Here are four ways to get transparency. Do read the manpage and option	62	#!/bin/sh
80	descriptions for the programs mentioned and rxvt-unicode. Really, do it!	63	urxvtc "$@"
		64	if [ $? -eq 2 ]; then
		65	urxvtd -q -o -f
		66	urxvtc "$@"
		67	fi
81		68
82	1. Use inheritPixmap:	69	This tries to create a new terminal, and if fails with exit status 2,
		70	meaning it couldn't connect to the daemon, it will start the daemon and
		71	re-run the command. Subsequent invocations of the script will re-use the
		72	existing daemon.
83		73
84	Esetroot wallpaper.jpg	74	How do I distinguish whether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.
85	rxvt -ip -tint red -sh 40	75	The original rxvt and rxvt-unicode always export the variable
		76	"COLORTERM", so you can check and see if that is set. Note that several
		77	programs, JED, slrn, Midnight Commander automatically check this
		78	variable to decide whether or not to use color.
86		79
87	That works. If you think it doesn't, you lack transparency and tinting	80	How do I set the correct, full IP address for the DISPLAY variable?
88	support, or you are unable to read.	81	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
		82	insecure mode then it is possible to use the following shell script
		83	snippets to correctly set the display. If your version of rxvt-unicode
		84	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets)
		85	then the COLORTERM variable can be used to distinguish rxvt-unicode from
		86	a regular xterm.
89		87
90	2. Use a simple pixmap and emulate pseudo-transparency. This enables you	88	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
91	to use effects other than tinting and shading: Just shade/tint/whatever	89	snippets:
92	your picture with gimp:
93		90
94	convert wallpaper.jpg -blur 20x20 -modulate 30 background.xpm	91	# Bourne/Korn/POSIX family of shells:
95	rxvt -pixmap background.xpm -pe automove-background	92	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
		93	if [ ${TERM:-foo} = xterm ]; then
		94	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
		95	echo -n '^[Z'
		96	read term_id
		97	stty icanon echo
		98	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
		99	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
		100	read DISPLAY # set it in our local shell
		101	fi
		102	fi
96		103
97	That works. If you think it doesn't, you lack XPM and Perl support, or	104	How do I compile the manual pages on my own?
98	you are unable to read.	105	You need to have a recent version of perl installed as /usr/bin/perl,
		106	one that comes with pod2man, pod2text and pod2xhtml (from Pod::Xhtml).
		107	Then go to the doc subdirectory and enter "make alldoc".
99		108
100	3. Use an ARGB visual:
101
102	rxvt -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
103
104	This requires XFT support, and the support of your X-server. If that
105	doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
106	there yet, no matter what they claim. Rxvt-Unicode contains the
107	neccessary bugfixes and workarounds for Xft and Xlib to make it work,
108	but that doesn't mean that your WM has the required kludges in place.
109
110	4. Use xcompmgr and let it do the job:
111
112	xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \
113	-set _NET_WM_WINDOW_OPACITY 0xc0000000
114
115	Then click on a window you want to make transparent. Replace 0xc0000000
116	by other values to change the degree of opacity. If it doesn't work and
117	your server crashes, you got to keep the pieces.
118
119	Isn't rxvt supposed to be small? Don't all those features bloat?	109	Isn't rxvt-unicode supposed to be small? Don't all those features bloat?
120	I often get asked about this, and I think, no, they didn't cause extra	110	I often get asked about this, and I think, no, they didn't cause extra
121	bloat. If you compare a minimal rxvt and a minimal urxvt, you can see	111	bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
122	that the urxvt binary is larger (due to some encoding tables always	112	that the urxvt binary is larger (due to some encoding tables always
123	being compiled in), but it actually uses less memory (RSS) after	113	being compiled in), but it actually uses less memory (RSS) after
124	startup. Even with "--disable-everything", this comparison is a bit	114	startup. Even with "--disable-everything", this comparison is a bit
…		…
127		117
128	text data bss drs rss filename	118	text data bss drs rss filename
129	98398 1664 24 15695 1824 rxvt --disable-everything	119	98398 1664 24 15695 1824 rxvt --disable-everything
130	188985 9048 66616 18222 1788 urxvt --disable-everything	120	188985 9048 66616 18222 1788 urxvt --disable-everything
131		121
132	When you "--enable-everything" (which _is_ unfair, as this involves xft	122	When you "--enable-everything" (which *is* unfair, as this involves xft
133	and full locale/XIM support which are quite bloaty inside libX11 and my	123	and full locale/XIM support which are quite bloaty inside libX11 and my
134	libc), the two diverge, but not unreasnobaly so.	124	libc), the two diverge, but not unreasonably so.
135		125
136	text data bss drs rss filename	126	text data bss drs rss filename
137	163431 2152 24 20123 2060 rxvt --enable-everything	127	163431 2152 24 20123 2060 rxvt --enable-everything
138	1035683 49680 66648 29096 3680 urxvt --enable-everything	128	1035683 49680 66648 29096 3680 urxvt --enable-everything
139		129
…		…
155	gnome-terminal (21152k + extra 4204k in separate processes) or konsole	145	gnome-terminal (21152k + extra 4204k in separate processes) or konsole
156	(22200k + extra 43180k in daemons that stay around after exit, plus half	146	(22200k + extra 43180k in daemons that stay around after exit, plus half
157	a minute of startup time, including the hundreds of warnings it spits	147	a minute of startup time, including the hundreds of warnings it spits
158	out), it fares extremely well *g*.	148	out), it fares extremely well *g*.
159		149
160	Why C++, isn't that unportable/bloated/uncool?	150	Why C++, isn't that unportable/bloated/uncool?
161	Is this a question? :) It comes up very often. The simple answer is: I	151	Is this a question? :) It comes up very often. The simple answer is: I
162	had to write it, and C++ allowed me to write and maintain it in a	152	had to write it, and C++ allowed me to write and maintain it in a
163	fraction of the time and effort (which is a scarce resource for me). Put	153	fraction of the time and effort (which is a scarce resource for me). Put
164	even shorter: It simply wouldn't exist without C++.	154	even shorter: It simply wouldn't exist without C++.
165		155
…		…
181		171
182	And here is rxvt-unicode:	172	And here is rxvt-unicode:
183		173
184	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)	174	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
185	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)	175	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
186	libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)	176	libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
187	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)	177	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
188	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)	178	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
189		179
190	No large bloated libraries (of course, none were linked in statically),	180	No large bloated libraries (of course, none were linked in statically),
191	except maybe libX11 :)	181	except maybe libX11 :)
192		182
193	Does it support tabs, can I have a tabbed rxvt-unicode?	183	Rendering, Font & Look and Feel Issues
194	Beginning with version 7.3, there is a perl extension that implements a	184	I can't get transparency working, what am I doing wrong?
195	simple tabbed terminal. It is installed by default, so any of these	185	First of all, please address all transparency related issues to Sasha
196	should give you tabs:	186	Vasko at sasha@aftercode.net and do not bug the author about it. Also,
197		187	if you can't get it working consider it a rite of passage: ... and you
198	rxvt -pe tabbed
199
200	URxvt.perl-ext-common: default,tabbed
201
202	It will also work fine with tabbing functionality of many window
203	managers or similar tabbing programs, and its embedding-features allow
204	it to be embedded into other programs, as witnessed by doc/rxvt-tabbed
205	or the upcoming "Gtk2::URxvt" perl module, which features a tabbed urxvt
206	(murxvt) terminal as an example embedding application.
207
208	How do I know which rxvt-unicode version I'm using?
209	The version number is displayed with the usage (-h). Also the escape
210	sequence "ESC [ 8 n" sets the window title to the version number. When
211	using the rxvtc client, the version displayed is that of the daemon.
212
213	I am using Debian GNU/Linux and have a problem...
214	The Debian GNU/Linux package of rxvt-unicode in sarge contains large
215	patches that considerably change the behaviour of rxvt-unicode (but
216	unfortunately this notice has been removed). Before reporting a bug to
217	the original rxvt-unicode author please download and install the genuine
218	version (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
219	the problem. If you cannot, chances are that the problems are specific
220	to Debian GNU/Linux, in which case it should be reported via the Debian
221	Bug Tracking System (use "reportbug" to report the bug).
222
223	For other problems that also affect the Debian package, you can and
224	probably should use the Debian BTS, too, because, after all, it's also a
225	bug in the Debian version and it serves as a reminder for other users
226	that might encounter the same issue.
227
228	I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
229	You should build one binary with the default options. configure now
230	enables most useful options, and the trend goes to making them
231	runtime-switchable, too, so there is usually no drawback to enbaling
232	them, except higher disk and possibly memory usage. The perl interpreter
233	should be enabled, as important functionality (menus, selection, likely
234	more in the future) depends on it.
235
236	You should not overwrite the "perl-ext-common" snd "perl-ext" resources
237	system-wide (except maybe with "defaults"). This will result in useful
238	behaviour. If your distribution aims at low memory, add an empty
239	"perl-ext-common" resource to the app-defaults file. This will keep the
240	perl interpreter disabled until the user enables it.
241
242	If you can/want build more binaries, I recommend building a minimal one
243	with "--disable-everything" (very useful) and a maximal one with
244	"--enable-everything" (less useful, it will be very big due to a lot of
245	encodings built-in that increase download times and are rarely used).
246
247	I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
248	It should be, starting with release 7.1. You are encouraged to properly
249	install urxvt with privileges necessary for your OS now.
250
251	When rxvt-unicode detects that it runs setuid or setgid, it will fork
252	into a helper process for privileged operations (pty handling on some
253	systems, utmp/wtmp/lastlog handling on others) and drop privileges
254	immediately. This is much safer than most other terminals that keep
255	privileges while running (but is more relevant to urxvt, as it contains
256	things as perl interpreters, which might be "helpful" to attackers).
257
258	This forking is done as the very first within main(), which is very
259	early and reduces possible bugs to initialisation code run before
260	main(), or things like the dynamic loader of your system, which should
261	result in very little risk.
262
263	When I log-in to another system it tells me about missing terminfo data?
264	The terminal description used by rxvt-unicode is not as widely available
265	as that for xterm, or even rxvt (for which the same problem often
266	arises).
267
268	The correct solution for this problem is to install the terminfo, this
269	can be done like this (with ncurses' infocmp):
270
271	REMOTE=remotesystem.domain
272	infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
273
274	... or by installing rxvt-unicode normally on the remote system,
275
276	If you cannot or do not want to do this, then you can simply set
277	"TERM=rxvt" or even "TERM=xterm", and live with the small number of
278	problems arising, which includes wrong keymapping, less and different
279	colours and some refresh errors in fullscreen applications. It's a nice
280	quick-and-dirty workaround for rare cases, though.
281
282	If you always want to do this (and are fine with the consequences) you
283	can either recompile rxvt-unicode with the desired TERM value or use a
284	resource to set it:
285
286	URxvt.termName: rxvt
287
288	If you don't plan to use rxvt (quite common...) you could also replace
289	the rxvt terminfo file with the rxvt-unicode one.
290
291	"tic" outputs some error when compiling the terminfo entry.
292	Most likely it's the empty definition for "enacs=". Just replace it by
293	"enacs=\E[0@" and try again.
294
295	"bash"'s readline does not work correctly under rxvt.
296	See next entry.
297
298	I need a termcap file entry.
299	One reason you might want this is that some distributions or operating
300	systems still compile some programs using the long-obsoleted termcap
301	library (Fedora Core's bash is one example) and rely on a termcap entry
302	for "rxvt-unicode".
303
304	You could use rxvt's termcap entry with resonable results in many cases.
305	You can also create a termcap entry by using terminfo's infocmp program
306	like this:
307
308	infocmp -C rxvt-unicode
309
310	Or you could use this termcap entry, generated by the command above:
311
312	rxvt-unicode|rxvt-unicode terminal (X Window System):\
313	:am:bw:eo:km:mi:ms:xn:xo:\
314	:co#80:it#8:li#24:lm#0:\
315	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
316	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
317	:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\
318	:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
319	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
320	:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
321	:i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
322	:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
323	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
324	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
325	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
326	:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
327	:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\
328	:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
329	:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\
330	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
331	:vs=\E[?25h:
332
333	Why does "ls" no longer have coloured output?
334	The "ls" in the GNU coreutils unfortunately doesn't use terminfo to
335	decide wether a terminal has colour, but uses it's own configuration
336	file. Needless to say, "rxvt-unicode" is not in it's default file (among
337	with most other terminals supporting colour). Either add:
338
339	TERM rxvt-unicode
340
341	to "/etc/DIR_COLORS" or simply add:
342
343	alias ls='ls --color=auto'
344
345	to your ".profile" or ".bashrc".
346
347	Why doesn't vim/emacs etc. use the 88 colour mode?
348	See next entry.
349
350	Why doesn't vim/emacs etc. make use of italic?
351	See next entry.
352
353	Why are the secondary screen-related options not working properly?
354	Make sure you are using "TERM=rxvt-unicode". Some pre-packaged
355	distributions (most notably Debian GNU/Linux) break rxvt-unicode by
356	setting "TERM" to "rxvt", which doesn't have these extra features.
357	Unfortunately, some of these (most notably, again, Debian GNU/Linux)
358	furthermore fail to even install the "rxvt-unicode" terminfo file, so
359	you will need to install it on your own (See the question When I log-in
360	to another system it tells me about missing terminfo data? on how to do
361	this).
362
363	My numerical keypad acts weird and generates differing output?
364	Some Debian GNUL/Linux users seem to have this problem, although no
365	specific details were reported so far. It is possible that this is
366	caused by the wrong "TERM" setting, although the details of wether and
367	how this can happen are unknown, as "TERM=rxvt" should offer a
368	compatible keymap. See the answer to the previous question, and please
369	report if that helped.
370
371	Rxvt-unicode does not seem to understand the selected encoding?
372	See next entry.
373
374	Unicode does not seem to work?
375	If you encounter strange problems like typing an accented character but
376	getting two unrelated other characters or similar, or if program output
377	is subtly garbled, then you should check your locale settings.
378
379	Rxvt-unicode must be started with the same "LC_CTYPE" setting as the
380	programs. Often rxvt-unicode is started in the "C" locale, while the
381	login script running within the rxvt-unicode window changes the locale
382	to something else, e.g. "en_GB.UTF-8". Needless to say, this is not
383	going to work.
384
385	The best thing is to fix your startup environment, as you will likely
386	run into other problems. If nothing works you can try this in your
387	.profile.	188	failed.
388		189
389	printf '\e]701;%s\007' "$LC_CTYPE"	190	Here are four ways to get transparency. Do read the manpage and option
		191	descriptions for the programs mentioned and rxvt-unicode. Really, do it!
390		192
391	If this doesn't work, then maybe you use a "LC_CTYPE" specification not	193	1. Use transparent mode:
392	supported on your systems. Some systems have a "locale" command which
393	displays this (also, "perl -e0" can be used to check locale settings, as
394	it will complain loudly if it cannot set the locale). If it displays
395	something like:
396		194
397	locale: Cannot set LC_CTYPE to default locale: ...	195	Esetroot wallpaper.jpg
		196	urxvt -tr -tint red -sh 40
398		197
399	Then the locale you specified is not supported on your system.	198	That works. If you think it doesn't, you lack transparency and tinting
		199	support, or you are unable to read.
400		200
401	If nothing works and you are sure that everything is set correctly then	201	2. Use a simple pixmap and emulate pseudo-transparency. This enables you
402	you will need to remember a little known fact: Some programs just don't	202	to use effects other than tinting and shading: Just shade/tint/whatever
403	support locales :(	203	your picture with gimp or any other tool:
404		204
405	Why do some characters look so much different than others?	205	convert wallpaper.jpg -blur 20x20 -modulate 30 background.jpg
406	See next entry.	206	urxvt -pixmap "background.jpg;:root"
407		207
408	How does rxvt-unicode choose fonts?	208	That works. If you think it doesn't, you lack AfterImage support, or you
409	Most fonts do not contain the full range of Unicode, which is fine.	209	are unable to read.
410	Chances are that the font you (or the admin/package maintainer of your
411	system/os) have specified does not cover all the characters you want to
412	display.
413		210
414	rxvt-unicode makes a best-effort try at finding a replacement font.	211	3. Use an ARGB visual:
415	Often the result is fine, but sometimes the chosen font looks
416	bad/ugly/wrong. Some fonts have totally strange characters that don't
417	resemble the correct glyph at all, and rxvt-unicode lacks the artificial
418	intelligence to detect that a specific glyph is wrong: it has to believe
419	the font that the characters it claims to contain indeed look correct.
420		212
421	In that case, select a font of your taste and add it to the font list,	213	urxvt -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
422	e.g.:
423		214
424	rxvt -fn basefont,font2,font3...	215	This requires XFT support, and the support of your X-server. If that
		216	doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
		217	there yet, no matter what they claim. Rxvt-Unicode contains the
		218	necessary bugfixes and workarounds for Xft and Xlib to make it work, but
		219	that doesn't mean that your WM has the required kludges in place.
425		220
426	When rxvt-unicode sees a character, it will first look at the base font.	221	4. Use xcompmgr and let it do the job:
427	If the base font does not contain the character, it will go to the next
428	font, and so on. Specifying your own fonts will also speed up this
429	search and use less resources within rxvt-unicode and the X-server.
430		222
431	The only limitation is that none of the fonts may be larger than the	223	xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \
432	base font, as the base font defines the terminal character cell size,	224	-set _NET_WM_WINDOW_OPACITY 0xc0000000
433	which must be the same due to the way terminals work.
434		225
435	Why do some chinese characters look so different than others?	226	Then click on a window you want to make transparent. Replace 0xc0000000
436	This is because there is a difference between script and language --	227	by other values to change the degree of opacity. If it doesn't work and
437	rxvt-unicode does not know which language the text that is output is, as	228	your server crashes, you got to keep the pieces.
438	it only knows the unicode character codes. If rxvt-unicode first sees a
439	japanese/chinese character, it might choose a japanese font for display.
440	Subsequent japanese characters will use that font. Now, many chinese
441	characters aren't represented in japanese fonts, so when the first
442	non-japanese character comes up, rxvt-unicode will look for a chinese
443	font -- unfortunately at this point, it will still use the japanese font
444	for chinese characters that are also in the japanese font.
445		229
446	The workaround is easy: just tag a chinese font at the end of your font
447	list (see the previous question). The key is to view the font list as a
448	preference list: If you expect more japanese, list a japanese font
449	first. If you expect more chinese, put a chinese font first.
450
451	In the future it might be possible to switch language preferences at
452	runtime (the internal data structure has no problem with using different
453	fonts for the same character at the same time, but no interface for this
454	has been designed yet).
455
456	Until then, you might get away with switching fonts at runtime (see "Can
457	I switch the fonts at runtime?" later in this document).
458
459	Why does rxvt-unicode sometimes leave pixel droppings?	230	Why does rxvt-unicode sometimes leave pixel droppings?
460	Most fonts were not designed for terminal use, which means that	231	Most fonts were not designed for terminal use, which means that
461	character size varies a lot. A font that is otherwise fine for terminal	232	character size varies a lot. A font that is otherwise fine for terminal
462	use might contain some characters that are simply too wide. Rxvt-unicode	233	use might contain some characters that are simply too wide. Rxvt-unicode
463	will avoid these characters. For characters that are just "a bit" too	234	will avoid these characters. For characters that are just "a bit" too
464	wide a special "careful" rendering mode is used that redraws adjacent	235	wide a special "careful" rendering mode is used that redraws adjacent
…		…
468	however: Xft fonts often draw glyphs larger than their acclaimed	239	however: Xft fonts often draw glyphs larger than their acclaimed
469	bounding box, and rxvt-unicode has no way of detecting this (the correct	240	bounding box, and rxvt-unicode has no way of detecting this (the correct
470	way is to ask for the character bounding box, which unfortunately is	241	way is to ask for the character bounding box, which unfortunately is
471	wrong in these cases).	242	wrong in these cases).
472		243
473	It's not clear (to me at least), wether this is a bug in Xft, freetype,	244	It's not clear (to me at least), whether this is a bug in Xft, freetype,
474	or the respective font. If you encounter this problem you might try	245	or the respective font. If you encounter this problem you might try
475	using the "-lsp" option to give the font more height. If that doesn't	246	using the "-lsp" option to give the font more height. If that doesn't
476	work, you might be forced to use a different font.	247	work, you might be forced to use a different font.
477		248
478	All of this is not a problem when using X11 core fonts, as their	249	All of this is not a problem when using X11 core fonts, as their
479	bounding box data is correct.	250	bounding box data is correct.
480		251
481	On Solaris 9, many line-drawing characters are too wide.
482	Seems to be a known bug, read
483	<http://nixdoc.net/files/forum/about34198.html>. Some people use the
484	following ugly workaround to get non-double-wide-characters working:
485
486	#define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
487
488	My Compose (Multi_key) key is no longer working.
489	The most common causes for this are that either your locale is not set
490	correctly, or you specified a preeditStyle that is not supported by your
491	input method. For example, if you specified OverTheSpot and your input
492	method (e.g. the default input method handling Compose keys) does not
493	support this (for instance because it is not visual), then rxvt-unicode
494	will continue without an input method.
495
496	In this case either do not specify a preeditStyle or specify more than
497	one pre-edit style, such as OverTheSpot,Root,None.
498
499	I cannot type "Ctrl-Shift-2" to get an ASCII NUL character due to ISO 14755
500	Either try "Ctrl-2" alone (it often is mapped to ASCII NUL even on
501	international keyboards) or simply use ISO 14755 support to your
502	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for
503	other codes, too, such as "Ctrl-Shift-1-d" to type the default telnet
504	escape character and so on.
505
506	How can I keep rxvt-unicode from using reverse video so much?	252	How can I keep rxvt-unicode from using reverse video so much?
507	First of all, make sure you are running with the right terminal settings	253	First of all, make sure you are running with the right terminal settings
508	("TERM=rxvt-unicode"), which will get rid of most of these effects. Then	254	("TERM=rxvt-unicode"), which will get rid of most of these effects. Then
509	make sure you have specified colours for italic and bold, as otherwise	255	make sure you have specified colours for italic and bold, as otherwise
510	rxvt-unicode might use reverse video to simulate the effect:	256	rxvt-unicode might use reverse video to simulate the effect:
511		257
512	URxvt.colorBD: white	258	URxvt.colorBD: white
513	URxvt.colorIT: green	259	URxvt.colorIT: green
514		260
515	Some programs assume totally weird colours (red instead of blue), how can I fix that?	261	Some programs assume totally weird colours (red instead of blue), how can I fix that?
516	For some unexplainable reason, some rare programs assume a very weird	262	For some unexplainable reason, some rare programs assume a very weird
517	colour palette when confronted with a terminal with more than the	263	colour palette when confronted with a terminal with more than the
518	standard 8 colours (rxvt-unicode supports 88). The right fix is, of	264	standard 8 colours (rxvt-unicode supports 88). The right fix is, of
519	course, to fix these programs not to assume non-ISO colours without very	265	course, to fix these programs not to assume non-ISO colours without very
520	good reasons.	266	good reasons.
521		267
522	In the meantime, you can either edit your "rxvt-unicode" terminfo	268	In the meantime, you can either edit your "rxvt-unicode" terminfo
523	definition to only claim 8 colour support or use "TERM=rxvt", which will	269	definition to only claim 8 colour support or use "TERM=rxvt", which will
524	fix colours but keep you from using other rxvt-unicode features.	270	fix colours but keep you from using other rxvt-unicode features.
525		271
526	I am on FreeBSD and rxvt-unicode does not seem to work at all.
527	Rxvt-unicode requires the symbol "__STDC_ISO_10646__" to be defined in
528	your compile environment, or an implementation that implements it,
529	wether it defines the symbol or not. "__STDC_ISO_10646__" requires that
530	wchar_t is represented as unicode.
531
532	As you might have guessed, FreeBSD does neither define this symobl nor
533	does it support it. Instead, it uses it's own internal representation of
534	wchar_t. This is, of course, completely fine with respect to standards.
535
536	However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" and
537	"UTF-8" locales under FreeBSD (which all use Unicode as wchar_t.
538
539	"__STDC_ISO_10646__" is the only sane way to support multi-language apps
540	in an OS, as using a locale-dependent (and non-standardized)
541	representation of wchar_t makes it impossible to convert between wchar_t
542	(as used by X11 and your applications) and any other encoding without
543	implementing OS-specific-wrappers for each and every locale. There
544	simply are no APIs to convert wchar_t into anything except the current
545	locale encoding.
546
547	Some applications (such as the formidable mlterm) work around this by
548	carrying their own replacement functions for character set handling with
549	them, and either implementing OS-dependent hacks or doing multiple
550	conversions (which is slow and unreliable in case the OS implements
551	encodings slightly different than the terminal emulator).
552
553	The rxvt-unicode author insists that the right way to fix this is in the
554	system libraries once and for all, instead of forcing every app to carry
555	complete replacements for them :)
556
557	I use Solaris 9 and it doesn't compile/work/etc.
558	Try the diff in doc/solaris9.patch as a base. It fixes the worst
559	problems with "wcwidth" and a compile problem.
560
561	How can I use rxvt-unicode under cygwin?
562	rxvt-unicode should compile and run out of the box on cygwin, using the
563	X11 libraries that come with cygwin. libW11 emulation is no longer
564	supported (and makes no sense, either, as it only supported a single
565	font). I recommend starting the X-server in "-multiwindow" or
566	"-rootless" mode instead, which will result in similar look&feel as the
567	old libW11 emulation.
568
569	At the time of this writing, cygwin didn't seem to support any
570	multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are
571	likely limited to 8-bit encodings.
572
573	How does rxvt-unicode determine the encoding to use?
574	See next entry.
575
576	Is there an option to switch encodings?
577	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
578	specific "utf-8" mode, such as xterm. In fact, it doesn't even know
579	about UTF-8 or any other encodings with respect to terminal I/O.
580
581	The reasons is that there exists a perfectly fine mechanism for
582	selecting the encoding, doing I/O and (most important) communicating
583	this to all applications so everybody agrees on character properties
584	such as width and code number. This mechanism is the *locale*.
585	Applications not using that info will have problems (for example,
586	"xterm" gets the width of characters wrong as it uses it's own,
587	locale-independent table under all locales).
588
589	Rxvt-unicode uses the "LC_CTYPE" locale category to select encoding. All
590	programs doing the same (that is, most) will automatically agree in the
591	interpretation of characters.
592
593	Unfortunately, there is no system-independent way to select locales, nor
594	is there a standard on how locale specifiers will look like.
595
596	On most systems, the content of the "LC_CTYPE" environment variable
597	contains an arbitrary string which corresponds to an already-installed
598	locale. Common names for locales are "en_US.UTF-8", "de_DE.ISO-8859-15",
599	"ja_JP.EUC-JP", i.e. "language_country.encoding", but other forms (i.e.
600	"de" or "german") are also common.
601
602	Rxvt-unicode ignores all other locale categories, and except for the
603	encoding, ignores country or language-specific settings, i.e.
604	"de_DE.UTF-8" and "ja_JP.UTF-8" are the normally same to rxvt-unicode.
605
606	If you want to use a specific encoding you have to make sure you start
607	rxvt-unicode with the correct "LC_CTYPE" category.
608
609	Can I switch locales at runtime?
610	Yes, using an escape sequence. Try something like this, which sets
611	rxvt-unicode's idea of "LC_CTYPE".
612
613	printf '\e]701;%s\007' ja_JP.SJIS
614
615	See also the previous answer.
616
617	Sometimes this capability is rather handy when you want to work in one
618	locale (e.g. "de_DE.UTF-8") but some programs don't support it (e.g.
619	UTF-8). For example, I use this script to start "xjdic", which first
620	switches to a locale supported by xjdic and back later:
621
622	printf '\e]701;%s\007' ja_JP.SJIS
623	xjdic -js
624	printf '\e]701;%s\007' de_DE.UTF-8
625
626	You can also use xterm's "luit" program, which usually works fine,
627	except for some locales where character width differs between program-
628	and rxvt-unicode-locales.
629
630	Can I switch the fonts at runtime?	272	Can I switch the fonts at runtime?
631	Yes, using an escape sequence. Try something like this, which has the	273	Yes, using an escape sequence. Try something like this, which has the
632	same effect as using the "-fn" switch, and takes effect immediately:	274	same effect as using the "-fn" switch, and takes effect immediately:
633		275
634	printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"	276	printf '\33]50;%s\007' "9x15bold,xft:Kochi Gothic"
635		277
636	This is useful if you e.g. work primarily with japanese (and prefer a	278	This is useful if you e.g. work primarily with japanese (and prefer a
637	japanese font), but you have to switch to chinese temporarily, where	279	japanese font), but you have to switch to chinese temporarily, where
638	japanese fonts would only be in your way.	280	japanese fonts would only be in your way.
639		281
640	You can think of this as a kind of manual ISO-2022 switching.	282	You can think of this as a kind of manual ISO-2022 switching.
641		283
642	Why do italic characters look as if clipped?	284	Why do italic characters look as if clipped?
643	Many fonts have difficulties with italic characters and hinting. For	285	Many fonts have difficulties with italic characters and hinting. For
644	example, the otherwise very nicely hinted font "xft:Bitstream Vera Sans	286	example, the otherwise very nicely hinted font "xft:Bitstream Vera Sans
645	Mono" completely fails in it's italic face. A workaround might be to	287	Mono" completely fails in its italic face. A workaround might be to
646	enable freetype autohinting, i.e. like this:	288	enable freetype autohinting, i.e. like this:
647		289
648	URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true	290	URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
649	URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true	291	URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
650		292
651	My input method wants <some encoding> but I want UTF-8, what can I do?
652	You can specify separate locales for the input method and the rest of
653	the terminal, using the resource "imlocale":
654
655	URxvt.imlocale: ja_JP.EUC-JP
656
657	Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and still
658	use your input method. Please note, however, that you will not be able
659	to input characters outside "EUC-JP" in a normal way then, as your input
660	method limits you.
661
662	Rxvt-unicode crashes when the X Input Method changes or exits.
663	Unfortunately, this is unavoidable, as the XIM protocol is racy by
664	design. Applications can avoid some crashes at the expense of memory
665	leaks, and Input Methods can avoid some crashes by careful ordering at
666	exit time. kinput2 (and derived input methods) generally succeeds, while
667	SCIM (or similar input methods) fails. In the end, however, crashes
668	cannot be completely avoided even if both sides cooperate.
669
670	So the only workaround is not to kill your Input Method Servers.
671
672	Rxvt-unicode uses gobs of memory, how can I reduce that?
673	Rxvt-unicode tries to obey the rule of not charging you for something
674	you don't use. One thing you should try is to configure out all settings
675	that you don't need, for example, Xft support is a resource hog by
676	design, when used. Compiling it out ensures that no Xft font will be
677	loaded accidentally when rxvt-unicode tries to find a font for your
678	characters.
679
680	Also, many people (me included) like large windows and even larger
681	scrollback buffers: Without "--enable-unicode3", rxvt-unicode will use 6
682	bytes per screen cell. For a 160x?? window this amounts to almost a
683	kilobyte per line. A scrollback buffer of 10000 lines will then (if
684	full) use 10 Megabytes of memory. With "--enable-unicode3" it gets
685	worse, as rxvt-unicode then uses 8 bytes per screen cell.
686
687	Can I speed up Xft rendering somehow?	293	Can I speed up Xft rendering somehow?
688	Yes, the most obvious way to speed it up is to avoid Xft entirely, as it	294	Yes, the most obvious way to speed it up is to avoid Xft entirely, as it
689	is simply slow. If you still want Xft fonts you might try to disable	295	is simply slow. If you still want Xft fonts you might try to disable
690	antialiasing (by appending ":antialias=false"), which saves lots of	296	antialiasing (by appending ":antialias=false"), which saves lots of
691	memory and also speeds up rendering considerably.	297	memory and also speeds up rendering considerably.
692		298
693	Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?	299	Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
694	Rxvt-unicode will use whatever you specify as a font. If it needs to	300	Rxvt-unicode will use whatever you specify as a font. If it needs to
695	fall back to it's default font search list it will prefer X11 core	301	fall back to its default font search list it will prefer X11 core fonts,
696	fonts, because they are small and fast, and then use Xft fonts. It has	302	because they are small and fast, and then use Xft fonts. It has
697	antialiasing disabled for most of them, because the author thinks they	303	antialiasing disabled for most of them, because the author thinks they
698	look best that way.	304	look best that way.
699		305
700	If you want antialiasing, you have to specify the fonts manually.	306	If you want antialiasing, you have to specify the fonts manually.
701		307
702	Mouse cut/paste suddenly no longer works.
703	Make sure that mouse reporting is actually turned off since killing some
704	editors prematurely may leave the mouse in mouse report mode. I've heard
705	that tcsh may use mouse reporting unless it otherwise specified. A quick
706	check is to see if cut/paste works when the Alt or Shift keys are
707	depressed.
708
709	What's with this bold/blink stuff?	308	What's with this bold/blink stuff?
710	If no bold colour is set via "colorBD:", bold will invert text using the	309	If no bold colour is set via "colorBD:", bold will invert text using the
711	standard foreground colour.	310	standard foreground colour.
712		311
713	For the standard background colour, blinking will actually make the text	312	For the standard background colour, blinking will actually make the text
714	blink when compiled with "--enable-blinking". with standard colours.	313	blink when compiled with "--enable-text-blink". Without
715	Without "--enable-blinking", the blink attribute will be ignored.	314	"--enable-text-blink", the blink attribute will be ignored.
716		315
717	On ANSI colours, bold/blink attributes are used to set high-intensity	316	On ANSI colours, bold/blink attributes are used to set high-intensity
718	foreground/background colors.	317	foreground/background colors.
719		318
720	color0-7 are the low-intensity colors.	319	color0-7 are the low-intensity colors.
721		320
722	color8-15 are the corresponding high-intensity colors.	321	color8-15 are the corresponding high-intensity colors.
723		322
724	I don't like the screen colors. How do I change them?	323	I don't like the screen colors. How do I change them?
725	You can change the screen colors at run-time using ~/.Xdefaults	324	You can change the screen colors at run-time using ~/.Xdefaults
726	resources (or as long-options).	325	resources (or as long-options).
727		326
728	Here are values that are supposed to resemble a VGA screen, including	327	Here are values that are supposed to resemble a VGA screen, including
729	the murky brown that passes for low-intensity yellow:	328	the murky brown that passes for low-intensity yellow:
…		…
744	URxvt.color12: #0000FF	343	URxvt.color12: #0000FF
745	URxvt.color13: #FF00FF	344	URxvt.color13: #FF00FF
746	URxvt.color14: #00FFFF	345	URxvt.color14: #00FFFF
747	URxvt.color15: #FFFFFF	346	URxvt.color15: #FFFFFF
748		347
749	And here is a more complete set of non-standard colors described (not by	348	And here is a more complete set of non-standard colors.
750	me) as "pretty girly".
751		349
752	URxvt.cursorColor: #dc74d1	350	URxvt.cursorColor: #dc74d1
753	URxvt.pointerColor: #dc74d1	351	URxvt.pointerColor: #dc74d1
754	URxvt.background: #0e0e0e	352	URxvt.background: #0e0e0e
755	URxvt.foreground: #4ad5e1	353	URxvt.foreground: #4ad5e1
…		…
766	URxvt.color6: #73f7ff	364	URxvt.color6: #73f7ff
767	URxvt.color14: #73f7ff	365	URxvt.color14: #73f7ff
768	URxvt.color7: #e1dddd	366	URxvt.color7: #e1dddd
769	URxvt.color15: #e1dddd	367	URxvt.color15: #e1dddd
770		368
771	How can I start rxvtd in a race-free way?	369	They have been described (not by me) as "pretty girly".
772	Try "rxvtd -f -o", which tells rxvtd to open the display, create the
773	listening socket and then fork.
774		370
		371	Why do some characters look so much different than others?
		372	See next entry.
		373
		374	How does rxvt-unicode choose fonts?
		375	Most fonts do not contain the full range of Unicode, which is fine.
		376	Chances are that the font you (or the admin/package maintainer of your
		377	system/os) have specified does not cover all the characters you want to
		378	display.
		379
		380	rxvt-unicode makes a best-effort try at finding a replacement font.
		381	Often the result is fine, but sometimes the chosen font looks
		382	bad/ugly/wrong. Some fonts have totally strange characters that don't
		383	resemble the correct glyph at all, and rxvt-unicode lacks the artificial
		384	intelligence to detect that a specific glyph is wrong: it has to believe
		385	the font that the characters it claims to contain indeed look correct.
		386
		387	In that case, select a font of your taste and add it to the font list,
		388	e.g.:
		389
		390	urxvt -fn basefont,font2,font3...
		391
		392	When rxvt-unicode sees a character, it will first look at the base font.
		393	If the base font does not contain the character, it will go to the next
		394	font, and so on. Specifying your own fonts will also speed up this
		395	search and use less resources within rxvt-unicode and the X-server.
		396
		397	The only limitation is that none of the fonts may be larger than the
		398	base font, as the base font defines the terminal character cell size,
		399	which must be the same due to the way terminals work.
		400
		401	Why do some chinese characters look so different than others?
		402	This is because there is a difference between script and language --
		403	rxvt-unicode does not know which language the text that is output is, as
		404	it only knows the unicode character codes. If rxvt-unicode first sees a
		405	japanese/chinese character, it might choose a japanese font for display.
		406	Subsequent japanese characters will use that font. Now, many chinese
		407	characters aren't represented in japanese fonts, so when the first
		408	non-japanese character comes up, rxvt-unicode will look for a chinese
		409	font -- unfortunately at this point, it will still use the japanese font
		410	for chinese characters that are also in the japanese font.
		411
		412	The workaround is easy: just tag a chinese font at the end of your font
		413	list (see the previous question). The key is to view the font list as a
		414	preference list: If you expect more japanese, list a japanese font
		415	first. If you expect more chinese, put a chinese font first.
		416
		417	In the future it might be possible to switch language preferences at
		418	runtime (the internal data structure has no problem with using different
		419	fonts for the same character at the same time, but no interface for this
		420	has been designed yet).
		421
		422	Until then, you might get away with switching fonts at runtime (see "Can
		423	I switch the fonts at runtime?" later in this document).
		424
		425	How can I make mplayer display video correctly?
		426	We are working on it, in the meantime, as a workaround, use something
		427	like:
		428
		429	urxvt -b 600 -geometry 20x1 -e sh -c 'mplayer -wid $WINDOWID file...'
		430
		431	Keyboard, Mouse & User Interaction
		432	The new selection selects pieces that are too big, how can I select single words?
		433	If you want to select e.g. alphanumeric words, you can use the following
		434	setting:
		435
		436	URxvt.selection.pattern-0: ([[:word:]]+)
		437
		438	If you click more than twice, the selection will be extended more and
		439	more.
		440
		441	To get a selection that is very similar to the old code, try this
		442	pattern:
		443
		444	URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
		445
		446	Please also note that the *LeftClick Shift-LeftClick* combination also
		447	selects words like the old code.
		448
		449	I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
		450	You can disable the perl extension completely by setting the
		451	perl-ext-common resource to the empty string, which also keeps
		452	rxvt-unicode from initialising perl, saving memory.
		453
		454	If you only want to disable specific features, you first have to
		455	identify which perl extension is responsible. For this, read the section
		456	PREPACKAGED EXTENSIONS in the urxvtperl(3) manpage. For example, to
		457	disable the selection-popup and option-popup, specify this
		458	perl-ext-common resource:
		459
		460	URxvt.perl-ext-common: default,-selection-popup,-option-popup
		461
		462	This will keep the default extensions, but disable the two popup
		463	extensions. Some extensions can also be configured, for example,
		464	scrollback search mode is triggered by M-s. You can move it to any other
		465	combination either by setting the searchable-scrollback resource:
		466
		467	URxvt.searchable-scrollback: CM-s
		468
		469	The cursor moves when selecting text in the current input line, how do I switch this off?
		470	See next entry.
		471
		472	During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?
		473	These are caused by the "readline" perl extension. Under normal
		474	circumstances, it will move your cursor around when you click into the
		475	line that contains it. It tries hard not to do this at the wrong moment,
		476	but when running a program that doesn't parse cursor movements or in
		477	some cases during rlogin sessions, it fails to detect this properly.
		478
		479	You can permanently switch this feature off by disabling the "readline"
		480	extension:
		481
		482	URxvt.perl-ext-common: default,-readline
		483
		484	My numerical keypad acts weird and generates differing output?
		485	Some Debian GNUL/Linux users seem to have this problem, although no
		486	specific details were reported so far. It is possible that this is
		487	caused by the wrong "TERM" setting, although the details of whether and
		488	how this can happen are unknown, as "TERM=rxvt" should offer a
		489	compatible keymap. See the answer to the previous question, and please
		490	report if that helped.
		491
		492	My Compose (Multi_key) key is no longer working.
		493	The most common causes for this are that either your locale is not set
		494	correctly, or you specified a preeditStyle that is not supported by your
		495	input method. For example, if you specified OverTheSpot and your input
		496	method (e.g. the default input method handling Compose keys) does not
		497	support this (for instance because it is not visual), then rxvt-unicode
		498	will continue without an input method.
		499
		500	In this case either do not specify a preeditStyle or specify more than
		501	one pre-edit style, such as OverTheSpot,Root,None.
		502
		503	I cannot type "Ctrl-Shift-2" to get an ASCII NUL character due to ISO 14755
		504	Either try "Ctrl-2" alone (it often is mapped to ASCII NUL even on
		505	international keyboards) or simply use ISO 14755 support to your
		506	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for
		507	other codes, too, such as "Ctrl-Shift-1-d" to type the default telnet
		508	escape character and so on.
		509
		510	Mouse cut/paste suddenly no longer works.
		511	Make sure that mouse reporting is actually turned off since killing some
		512	editors prematurely may leave the mouse in mouse report mode. I've heard
		513	that tcsh may use mouse reporting unless it otherwise specified. A quick
		514	check is to see if cut/paste works when the Alt or Shift keys are
		515	depressed.
		516
775	What's with the strange Backspace/Delete key behaviour?	517	What's with the strange Backspace/Delete key behaviour?
776	Assuming that the physical Backspace key corresponds to the BackSpace	518	Assuming that the physical Backspace key corresponds to the Backspace
777	keysym (not likely for Linux ... see the following question) there are	519	keysym (not likely for Linux ... see the following question) there are
778	two standard values that can be used for Backspace: "^H" and "^?".	520	two standard values that can be used for Backspace: "^H" and "^?".
779		521
780	Historically, either value is correct, but rxvt-unicode adopts the	522	Historically, either value is correct, but rxvt-unicode adopts the
781	debian policy of using "^?" when unsure, because it's the one only only	523	debian policy of using "^?" when unsure, because it's the one and only
782	correct choice :).	524	correct choice :).
783		525
784	Rxvt-unicode tries to inherit the current stty settings and uses the	526	Rxvt-unicode tries to inherit the current stty settings and uses the
785	value of `erase' to guess the value for backspace. If rxvt-unicode	527	value of `erase' to guess the value for backspace. If rxvt-unicode
786	wasn't started from a terminal (say, from a menu or by remote shell),	528	wasn't started from a terminal (say, from a menu or by remote shell),
…		…
790		532
791	For starting a new rxvt-unicode:	533	For starting a new rxvt-unicode:
792		534
793	# use Backspace = ^H	535	# use Backspace = ^H
794	$ stty erase ^H	536	$ stty erase ^H
795	$ rxvt	537	$ urxvt
796		538
797	# use Backspace = ^?	539	# use Backspace = ^?
798	$ stty erase ^?	540	$ stty erase ^?
799	$ rxvt	541	$ urxvt
800		542
801	Toggle with "ESC [ 36 h" / "ESC [ 36 l".	543	Toggle with "ESC [ 36 h" / "ESC [ 36 l".
802		544
803	For an existing rxvt-unicode:	545	For an existing rxvt-unicode:
804		546
…		…
824	some editors use termcap/terminfo, some editors (vim I'm told) expect	566	some editors use termcap/terminfo, some editors (vim I'm told) expect
825	Backspace = ^H, GNU Emacs (and Emacs-like editors) use ^H for help.	567	Backspace = ^H, GNU Emacs (and Emacs-like editors) use ^H for help.
826		568
827	Perhaps someday this will all be resolved in a consistent manner.	569	Perhaps someday this will all be resolved in a consistent manner.
828		570
829	I don't like the key-bindings. How do I change them?	571	I don't like the key-bindings. How do I change them?
830	There are some compile-time selections available via configure. Unless	572	There are some compile-time selections available via configure. Unless
831	you have run "configure" with the "--disable-resources" option you can	573	you have run "configure" with the "--disable-resources" option you can
832	use the `keysym' resource to alter the keystrings associated with	574	use the `keysym' resource to alter the keystrings associated with
833	keysyms.	575	keysyms.
834		576
835	Here's an example for a URxvt session started using "rxvt -name URxvt"	577	Here's an example for a URxvt session started using "urxvt -name URxvt"
836		578
837	URxvt.keysym.Home: \033[1~	579	URxvt.keysym.Home: \033[1~
838	URxvt.keysym.End: \033[4~	580	URxvt.keysym.End: \033[4~
839	URxvt.keysym.C-apostrophe: \033<C-'>	581	URxvt.keysym.C-apostrophe: \033<C-'>
840	URxvt.keysym.C-slash: \033<C-/>	582	URxvt.keysym.C-slash: \033<C-/>
…		…
855	URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz >	597	URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz >
856	URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007	598	URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007
857		599
858	See some more examples in the documentation for the keysym resource.	600	See some more examples in the documentation for the keysym resource.
859		601
860	I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following mappings that rxvt-unicode doesn't recognize.	602	I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map
861	KP_Insert == Insert	603	KP_Insert == Insert
862	F22 == Print	604	F22 == Print
863	F27 == Home	605	F27 == Home
864	F29 == Prior	606	F29 == Prior
865	F33 == End	607	F33 == End
…		…
867		609
868	Rather than have rxvt-unicode try to accommodate all the various	610	Rather than have rxvt-unicode try to accommodate all the various
869	possible keyboard mappings, it is better to use `xmodmap' to remap the	611	possible keyboard mappings, it is better to use `xmodmap' to remap the
870	keys as required for your particular machine.	612	keys as required for your particular machine.
871		613
872	How do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.	614	Terminal Configuration
873	rxvt and rxvt-unicode always export the variable "COLORTERM", so you can	615	Can I see a typical configuration?
874	check and see if that is set. Note that several programs, JED, slrn,	616	The default configuration tries to be xterm-like, which I don't like
875	Midnight Commander automatically check this variable to decide whether	617	that much, but it's least surprise to regular users.
876	or not to use color.
877		618
878	How do I set the correct, full IP address for the DISPLAY variable?	619	As a rxvt or rxvt-unicode user, you are practically supposed to invest
879	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled	620	time into customising your terminal. To get you started, here is the
880	insecure mode then it is possible to use the following shell script	621	author's .Xdefaults entries, with comments on what they do. It's
881	snippets to correctly set the display. If your version of rxvt-unicode	622	certainly not *typical*, but what's typical...
882	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets)
883	then the COLORTERM variable can be used to distinguish rxvt-unicode from
884	a regular xterm.
885		623
886	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script	624	URxvt.cutchars: "()*,<>[]{}|'
887	snippets:	625	URxvt.print-pipe: cat >/tmp/xxx
888		626
889	# Bourne/Korn/POSIX family of shells:	627	These are just for testing stuff.
890	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
891	if [ ${TERM:-foo} = xterm ]; then
892	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
893	echo -n '^[Z'
894	read term_id
895	stty icanon echo
896	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
897	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
898	read DISPLAY # set it in our local shell
899	fi
900	fi
901		628
902	How do I compile the manual pages for myself?	629	URxvt.imLocale: ja_JP.UTF-8
903	You need to have a recent version of perl installed as /usr/bin/perl,	630	URxvt.preeditType: OnTheSpot,None
904	one that comes with pod2man, pod2text and pod2html. Then go to the doc
905	subdirectory and enter "make alldoc".
906		631
907	My question isn't answered here, can I ask a human?	632	This tells rxvt-unicode to use a special locale when communicating with
908	Before sending me mail, you could go to IRC: "irc.freenode.net", channel	633	the X Input Method, and also tells it to only use the OnTheSpot pre-edit
909	"#rxvt-unicode" has some rxvt-unicode enthusiasts that might be	634	type, which requires the "xim-onthespot" perl extension but rewards me
910	interested in learning about new and exciting problems (but not FAQs :).	635	with correct-looking fonts.
911		636
		637	URxvt.perl-lib: /root/lib/urxvt
		638	URxvt.perl-ext-common: default,selection-autotransform,selection-pastebin,xim-onthespot,remote-clipboard
		639	URxvt.selection.pattern-0: ( at .*? line \\d+)
		640	URxvt.selection.pattern-1: ^(/[^:]+):\
		641	URxvt.selection-autotransform.0: s/^([^:[:space:]]+):(\\d+):?$/:e \\Q$1\\E\\x0d:$2\\x0d/
		642	URxvt.selection-autotransform.1: s/^ at (.*?) line (\\d+)$/:e \\Q$1\\E\\x0d:$2\\x0d/
		643
		644	This is my perl configuration. The first two set the perl library
		645	directory and also tells urxvt to use a large number of extensions. I
		646	develop for myself mostly, so I actually use most of the extensions I
		647	write.
		648
		649	The selection stuff mainly makes the selection perl-error-message aware
		650	and tells it to convert perl error messages into vi-commands to load the
		651	relevant file and go tot he error line number.
		652
		653	URxvt.scrollstyle: plain
		654	URxvt.secondaryScroll: true
		655
		656	As the documentation says: plain is the preferred scrollbar for the
		657	author. The "secondaryScroll" configures urxvt to scroll in full-screen
		658	apps, like screen, so lines scrolled out of screen end up in urxvt's
		659	scrollback buffer.
		660
		661	URxvt.background: #000000
		662	URxvt.foreground: gray90
		663	URxvt.color7: gray90
		664	URxvt.colorBD: #ffffff
		665	URxvt.cursorColor: #e0e080
		666	URxvt.throughColor: #8080f0
		667	URxvt.highlightColor: #f0f0f0
		668
		669	Some colours. Not sure which ones are being used or even non-defaults,
		670	but these are in my .Xdefaults. Most notably, they set
		671	foreground/background to light gray/black, and also make sure that the
		672	colour 7 matches the default foreground colour.
		673
		674	URxvt.underlineColor: yellow
		675
		676	Another colour, makes underline lines look different. Sometimes hurts,
		677	but is mostly a nice effect.
		678
		679	URxvt.geometry: 154x36
		680	URxvt.loginShell: false
		681	URxvt.meta: ignore
		682	URxvt.utmpInhibit: true
		683
		684	Uh, well, should be mostly self-explanatory. By specifying some defaults
		685	manually, I can quickly switch them for testing.
		686
		687	URxvt.saveLines: 8192
		688
		689	A large scrollback buffer is essential. Really.
		690
		691	URxvt.mapAlert: true
		692
		693	The only case I use it is for my IRC window, which I like to keep
		694	iconified till people msg me (which beeps).
		695
		696	URxvt.visualBell: true
		697
		698	The audible bell is often annoying, especially when in a crowd.
		699
		700	URxvt.insecure: true
		701
		702	Please don't hack my mutt! Ooops...
		703
		704	URxvt.pastableTabs: false
		705
		706	I once thought this is a great idea.
		707
		708	urxvt.font: 9x15bold,\
		709	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
		710	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
		711	[codeset=JISX0208]xft:Kochi Gothic, \
		712	xft:Bitstream Vera Sans Mono:autohint=true, \
		713	xft:Code2000:antialias=false
		714	urxvt.boldFont: -xos4-terminus-bold-r-normal--14-140-72-72-c-80-iso8859-15
		715	urxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
		716	urxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
		717
		718	I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
		719	overwhelmed. A special note: the "9x15bold" mentioned above is actually
		720	the version from XFree-3.3, as XFree-4 replaced it by a totally
		721	different font (different glyphs for ";" and many other harmless
		722	characters), while the second font is actually the "9x15bold" from
		723	XFree4/XOrg. The bold version has less chars than the medium version, so
		724	I use it for rare characters, too. When editing sources with vim, I use
		725	italic for comments and other stuff, which looks quite good with
		726	Bitstream Vera anti-aliased.
		727
		728	Terminus is a quite bad font (many very wrong glyphs), but for most of
		729	my purposes, it works, and gives a different look, as my normal
		730	(Non-bold) font is already bold, and I want to see a difference between
		731	bold and normal fonts.
		732
		733	Please note that I used the "urxvt" instance name and not the "URxvt"
		734	class name. Thats because I use different configs for different
		735	purposes, for example, my IRC window is started with "-name IRC", and
		736	uses these defaults:
		737
		738	IRC*title: IRC
		739	IRC*geometry: 87x12+535+542
		740	IRC*saveLines: 0
		741	IRC*mapAlert: true
		742	IRC*font: suxuseuro
		743	IRC*boldFont: suxuseuro
		744	IRC*colorBD: white
		745	IRC*keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		746	IRC*keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
		747
		748	"Alt-Shift-1" and "Alt-Shift-2" switch between two different font sizes.
		749	"suxuseuro" allows me to keep an eye (and actually read) stuff while
		750	keeping a very small window. If somebody pastes something complicated
		751	(e.g. japanese), I temporarily switch to a larger font.
		752
		753	The above is all in my ".Xdefaults" (I don't use ".Xresources" nor
		754	"xrdb"). I also have some resources in a separate ".Xdefaults-hostname"
		755	file for different hosts, for example, on ym main desktop, I use:
		756
		757	URxvt.keysym.C-M-q: command:\033[3;5;5t
		758	URxvt.keysym.C-M-y: command:\033[3;5;606t
		759	URxvt.keysym.C-M-e: command:\033[3;1605;5t
		760	URxvt.keysym.C-M-c: command:\033[3;1605;606t
		761	URxvt.keysym.C-M-p: perl:test
		762
		763	The first for keysym definitions allow me to quickly bring some windows
		764	in the layout I like most. Ion users might start laughing but will stop
		765	immediately when I tell them that I use my own Fvwm2 module for much the
		766	same effect as Ion provides, and I only very rarely use the above key
		767	combinations :->
		768
		769	Why doesn't rxvt-unicode read my resources?
		770	Well, why, indeed? It does, in a way very similar to other X
		771	applications. Most importantly, this means that if you or your OS loads
		772	resources into the X display (the right way to do it), rxvt-unicode will
		773	ignore any resource files in your home directory. It will only read
		774	$HOME/.Xdefaults when no resources are attached to the display.
		775
		776	If you have or use an $HOME/.Xresources file, chances are that resources
		777	are loaded into your X-server. In this case, you have to re-login after
		778	every change (or run xrdb -merge $HOME/.Xresources).
		779
		780	Also consider the form resources have to use:
		781
		782	URxvt.resource: value
		783
		784	If you want to use another form (there are lots of different ways of
		785	specifying resources), make sure you understand whether and why it
		786	works. If unsure, use the form above.
		787
		788	When I log-in to another system it tells me about missing terminfo data?
		789	The terminal description used by rxvt-unicode is not as widely available
		790	as that for xterm, or even rxvt (for which the same problem often
		791	arises).
		792
		793	The correct solution for this problem is to install the terminfo, this
		794	can be done like this (with ncurses' infocmp and works as user and
		795	admin):
		796
		797	REMOTE=remotesystem.domain
		798	infocmp rxvt-unicode | ssh $REMOTE "mkdir -p .terminfo && cat >/tmp/ti && tic /tmp/ti"
		799
		800	... or by installing rxvt-unicode normally on the remote system,
		801
		802	One some systems you might need to set $TERMINFO to the full path of
		803	$HOME/.terminfo for this to work.
		804
		805	If you cannot or do not want to do this, then you can simply set
		806	"TERM=rxvt" or even "TERM=xterm", and live with the small number of
		807	problems arising, which includes wrong keymapping, less and different
		808	colours and some refresh errors in fullscreen applications. It's a nice
		809	quick-and-dirty workaround for rare cases, though.
		810
		811	If you always want to do this (and are fine with the consequences) you
		812	can either recompile rxvt-unicode with the desired TERM value or use a
		813	resource to set it:
		814
		815	URxvt.termName: rxvt
		816
		817	If you don't plan to use rxvt (quite common...) you could also replace
		818	the rxvt terminfo file with the rxvt-unicode one and use "TERM=rxvt".
		819
		820	"tic" outputs some error when compiling the terminfo entry.
		821	Most likely it's the empty definition for "enacs=". Just replace it by
		822	"enacs=\E[0@" and try again.
		823
		824	"bash"'s readline does not work correctly under urxvt.
		825	See next entry.
		826
		827	I need a termcap file entry.
		828	One reason you might want this is that some distributions or operating
		829	systems still compile some programs using the long-obsoleted termcap
		830	library (Fedora Core's bash is one example) and rely on a termcap entry
		831	for "rxvt-unicode".
		832
		833	You could use rxvt's termcap entry with reasonable results in many
		834	cases. You can also create a termcap entry by using terminfo's infocmp
		835	program like this:
		836
		837	infocmp -C rxvt-unicode
		838
		839	Or you could use the termcap entry in doc/etc/rxvt-unicode.termcap,
		840	generated by the command above.
		841
		842	Why does "ls" no longer have coloured output?
		843	The "ls" in the GNU coreutils unfortunately doesn't use terminfo to
		844	decide whether a terminal has colour, but uses its own configuration
		845	file. Needless to say, "rxvt-unicode" is not in its default file (among
		846	with most other terminals supporting colour). Either add:
		847
		848	TERM rxvt-unicode
		849
		850	to "/etc/DIR_COLORS" or simply add:
		851
		852	alias ls='ls --color=auto'
		853
		854	to your ".profile" or ".bashrc".
		855
		856	Why doesn't vim/emacs etc. use the 88 colour mode?
		857	See next entry.
		858
		859	Why doesn't vim/emacs etc. make use of italic?
		860	See next entry.
		861
		862	Why are the secondary screen-related options not working properly?
		863	Make sure you are using "TERM=rxvt-unicode". Some pre-packaged
		864	distributions (most notably Debian GNU/Linux) break rxvt-unicode by
		865	setting "TERM" to "rxvt", which doesn't have these extra features.
		866	Unfortunately, some of these (most notably, again, Debian GNU/Linux)
		867	furthermore fail to even install the "rxvt-unicode" terminfo file, so
		868	you will need to install it on your own (See the question When I log-in
		869	to another system it tells me about missing terminfo data? on how to do
		870	this).
		871
		872	Encoding / Locale / Input Method Issues
		873	Rxvt-unicode does not seem to understand the selected encoding?
		874	See next entry.
		875
		876	Unicode does not seem to work?
		877	If you encounter strange problems like typing an accented character but
		878	getting two unrelated other characters or similar, or if program output
		879	is subtly garbled, then you should check your locale settings.
		880
		881	Rxvt-unicode must be started with the same "LC_CTYPE" setting as the
		882	programs running in it. Often rxvt-unicode is started in the "C" locale,
		883	while the login script running within the rxvt-unicode window changes
		884	the locale to something else, e.g. "en_GB.UTF-8". Needless to say, this
		885	is not going to work, and is the most common cause for problems.
		886
		887	The best thing is to fix your startup environment, as you will likely
		888	run into other problems. If nothing works you can try this in your
		889	.profile.
		890
		891	printf '\33]701;%s\007' "$LC_CTYPE" # $LANG or $LC_ALL are worth a try, too
		892
		893	If this doesn't work, then maybe you use a "LC_CTYPE" specification not
		894	supported on your systems. Some systems have a "locale" command which
		895	displays this (also, "perl -e0" can be used to check locale settings, as
		896	it will complain loudly if it cannot set the locale). If it displays
		897	something like:
		898
		899	locale: Cannot set LC_CTYPE to default locale: ...
		900
		901	Then the locale you specified is not supported on your system.
		902
		903	If nothing works and you are sure that everything is set correctly then
		904	you will need to remember a little known fact: Some programs just don't
		905	support locales :(
		906
		907	How does rxvt-unicode determine the encoding to use?
		908	See next entry.
		909
		910	Is there an option to switch encodings?
		911	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
		912	specific "utf-8" mode, such as xterm. In fact, it doesn't even know
		913	about UTF-8 or any other encodings with respect to terminal I/O.
		914
		915	The reasons is that there exists a perfectly fine mechanism for
		916	selecting the encoding, doing I/O and (most important) communicating
		917	this to all applications so everybody agrees on character properties
		918	such as width and code number. This mechanism is the *locale*.
		919	Applications not using that info will have problems (for example,
		920	"xterm" gets the width of characters wrong as it uses its own,
		921	locale-independent table under all locales).
		922
		923	Rxvt-unicode uses the "LC_CTYPE" locale category to select encoding. All
		924	programs doing the same (that is, most) will automatically agree in the
		925	interpretation of characters.
		926
		927	Unfortunately, there is no system-independent way to select locales, nor
		928	is there a standard on how locale specifiers will look like.
		929
		930	On most systems, the content of the "LC_CTYPE" environment variable
		931	contains an arbitrary string which corresponds to an already-installed
		932	locale. Common names for locales are "en_US.UTF-8", "de_DE.ISO-8859-15",
		933	"ja_JP.EUC-JP", i.e. "language_country.encoding", but other forms (i.e.
		934	"de" or "german") are also common.
		935
		936	Rxvt-unicode ignores all other locale categories, and except for the
		937	encoding, ignores country or language-specific settings, i.e.
		938	"de_DE.UTF-8" and "ja_JP.UTF-8" are the normally same to rxvt-unicode.
		939
		940	If you want to use a specific encoding you have to make sure you start
		941	rxvt-unicode with the correct "LC_CTYPE" category.
		942
		943	Can I switch locales at runtime?
		944	Yes, using an escape sequence. Try something like this, which sets
		945	rxvt-unicode's idea of "LC_CTYPE".
		946
		947	printf '\33]701;%s\007' ja_JP.SJIS
		948
		949	See also the previous answer.
		950
		951	Sometimes this capability is rather handy when you want to work in one
		952	locale (e.g. "de_DE.UTF-8") but some programs don't support it (e.g.
		953	UTF-8). For example, I use this script to start "xjdic", which first
		954	switches to a locale supported by xjdic and back later:
		955
		956	printf '\33]701;%s\007' ja_JP.SJIS
		957	xjdic -js
		958	printf '\33]701;%s\007' de_DE.UTF-8
		959
		960	You can also use xterm's "luit" program, which usually works fine,
		961	except for some locales where character width differs between program-
		962	and rxvt-unicode-locales.
		963
		964	I have problems getting my input method working.
		965	Try a search engine, as this is slightly different for every input
		966	method server.
		967
		968	Here is a checklist:
		969
		970	- Make sure your locale *and* the imLocale are supported on your OS.
		971	Try "locale -a" or check the documentation for your OS.
		972
		973	- Make sure your locale or imLocale matches a locale supported by your
		974	XIM.
		975	For example, kinput2 does not support UTF-8 locales, you should use
		976	"ja_JP.EUC-JP" or equivalent.
		977
		978	- Make sure your XIM server is actually running.
		979	- Make sure the "XMODIFIERS" environment variable is set correctly when
		980	*starting* rxvt-unicode.
		981	When you want to use e.g. kinput2, it must be set to "@im=kinput2".
		982	For scim, use "@im=SCIM". You can see what input method servers are
		983	running with this command:
		984
		985	xprop -root XIM_SERVERS
		986
		987
		988
		989	My input method wants <some encoding> but I want UTF-8, what can I do?
		990	You can specify separate locales for the input method and the rest of
		991	the terminal, using the resource "imlocale":
		992
		993	URxvt.imlocale: ja_JP.EUC-JP
		994
		995	Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and still
		996	use your input method. Please note, however, that, depending on your
		997	Xlib version, you may not be able to input characters outside "EUC-JP"
		998	in a normal way then, as your input method limits you.
		999
		1000	Rxvt-unicode crashes when the X Input Method changes or exits.
		1001	Unfortunately, this is unavoidable, as the XIM protocol is racy by
		1002	design. Applications can avoid some crashes at the expense of memory
		1003	leaks, and Input Methods can avoid some crashes by careful ordering at
		1004	exit time. kinput2 (and derived input methods) generally succeeds, while
		1005	SCIM (or similar input methods) fails. In the end, however, crashes
		1006	cannot be completely avoided even if both sides cooperate.
		1007
		1008	So the only workaround is not to kill your Input Method Servers.
		1009
		1010	Operating Systems / Package Maintaining
		1011	I am using Debian GNU/Linux and have a problem...
		1012	The Debian GNU/Linux package of rxvt-unicode in sarge contains large
		1013	patches that considerably change the behaviour of rxvt-unicode (but
		1014	unfortunately this notice has been removed). Before reporting a bug to
		1015	the original rxvt-unicode author please download and install the genuine
		1016	version (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
		1017	the problem. If you cannot, chances are that the problems are specific
		1018	to Debian GNU/Linux, in which case it should be reported via the Debian
		1019	Bug Tracking System (use "reportbug" to report the bug).
		1020
		1021	For other problems that also affect the Debian package, you can and
		1022	probably should use the Debian BTS, too, because, after all, it's also a
		1023	bug in the Debian version and it serves as a reminder for other users
		1024	that might encounter the same issue.
		1025
		1026	I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
		1027	You should build one binary with the default options. configure now
		1028	enables most useful options, and the trend goes to making them
		1029	runtime-switchable, too, so there is usually no drawback to enabling
		1030	them, except higher disk and possibly memory usage. The perl interpreter
		1031	should be enabled, as important functionality (menus, selection, likely
		1032	more in the future) depends on it.
		1033
		1034	You should not overwrite the "perl-ext-common" snd "perl-ext" resources
		1035	system-wide (except maybe with "defaults"). This will result in useful
		1036	behaviour. If your distribution aims at low memory, add an empty
		1037	"perl-ext-common" resource to the app-defaults file. This will keep the
		1038	perl interpreter disabled until the user enables it.
		1039
		1040	If you can/want build more binaries, I recommend building a minimal one
		1041	with "--disable-everything" (very useful) and a maximal one with
		1042	"--enable-everything" (less useful, it will be very big due to a lot of
		1043	encodings built-in that increase download times and are rarely used).
		1044
		1045	I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
		1046	It should be, starting with release 7.1. You are encouraged to properly
		1047	install urxvt with privileges necessary for your OS now.
		1048
		1049	When rxvt-unicode detects that it runs setuid or setgid, it will fork
		1050	into a helper process for privileged operations (pty handling on some
		1051	systems, utmp/wtmp/lastlog handling on others) and drop privileges
		1052	immediately. This is much safer than most other terminals that keep
		1053	privileges while running (but is more relevant to urxvt, as it contains
		1054	things as perl interpreters, which might be "helpful" to attackers).
		1055
		1056	This forking is done as the very first within main(), which is very
		1057	early and reduces possible bugs to initialisation code run before
		1058	main(), or things like the dynamic loader of your system, which should
		1059	result in very little risk.
		1060
		1061	I am on FreeBSD and rxvt-unicode does not seem to work at all.
		1062	Rxvt-unicode requires the symbol "__STDC_ISO_10646__" to be defined in
		1063	your compile environment, or an implementation that implements it,
		1064	whether it defines the symbol or not. "__STDC_ISO_10646__" requires that
		1065	wchar_t is represented as unicode.
		1066
		1067	As you might have guessed, FreeBSD does neither define this symbol nor
		1068	does it support it. Instead, it uses its own internal representation of
		1069	wchar_t. This is, of course, completely fine with respect to standards.
		1070
		1071	However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" and
		1072	"UTF-8" locales under FreeBSD (which all use Unicode as wchar_t).
		1073
		1074	"__STDC_ISO_10646__" is the only sane way to support multi-language apps
		1075	in an OS, as using a locale-dependent (and non-standardized)
		1076	representation of wchar_t makes it impossible to convert between wchar_t
		1077	(as used by X11 and your applications) and any other encoding without
		1078	implementing OS-specific-wrappers for each and every locale. There
		1079	simply are no APIs to convert wchar_t into anything except the current
		1080	locale encoding.
		1081
		1082	Some applications (such as the formidable mlterm) work around this by
		1083	carrying their own replacement functions for character set handling with
		1084	them, and either implementing OS-dependent hacks or doing multiple
		1085	conversions (which is slow and unreliable in case the OS implements
		1086	encodings slightly different than the terminal emulator).
		1087
		1088	The rxvt-unicode author insists that the right way to fix this is in the
		1089	system libraries once and for all, instead of forcing every app to carry
		1090	complete replacements for them :)
		1091
		1092	How can I use rxvt-unicode under cygwin?
		1093	rxvt-unicode should compile and run out of the box on cygwin, using the
		1094	X11 libraries that come with cygwin. libW11 emulation is no longer
		1095	supported (and makes no sense, either, as it only supported a single
		1096	font). I recommend starting the X-server in "-multiwindow" or
		1097	"-rootless" mode instead, which will result in similar look&feel as the
		1098	old libW11 emulation.
		1099
		1100	At the time of this writing, cygwin didn't seem to support any
		1101	multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are
		1102	likely limited to 8-bit encodings.
		1103
		1104	Character widths are not correct.
		1105	urxvt uses the system wcwidth function to know the information about the
		1106	width of characters, so on systems with incorrect locale data you will
		1107	likely get bad results. Two notorious examples are Solaris 9, where
		1108	single-width characters like U+2514 are reported as double-width, and
		1109	Darwin 8, where combining chars are reported having width 1.
		1110
		1111	The solution is to upgrade your system or switch to a better one. A
		1112	possibly working workaround is to use a wcwidth implementation like
		1113
		1114	http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
		1115

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines