[ViewVC] Diff of: cvs/rxvt-unicode/README.configure

Comparing rxvt-unicode/README.configure (file contents):
Revision 1.51 by root, Thu Nov 2 17:37:47 2006 UTC vs.
Revision 1.60 by root, Fri Dec 14 06:05:40 2007 UTC

 CONFIGURE OPTIONS
     General hint: if you get compile errors, then likely your configuration
     hasn't been tested well. Either try with "--enable-everything" or use
-    the ./reconf script as a base for experiments. ./reconf is used by
+    the default configuration (i.e. no "--enable-xxx" or "--disable-xxx"
-    myself, so it should generally be a working config. Of course, you
+    switches). Of course, you should always report when a combination
-    should always report when a combination doesn't work, so it can be
-    fixed. Marc Lehmann <rxvt@schmorp.de>.
+    doesn't work, so it can be fixed. Marc Lehmann <rxvt@schmorp.de>.
     All
     --enable-everything
         Add (or remove) support for all non-multichoice options listed in
         about 700kB), but it doesn't increase memory usage unless you use a
         font requiring one of these encodings.
            all             all available codeset groups
            zh              common chinese encodings
-           zh_ext          rarely used but very big chinese encodigs
+           zh_ext          rarely used but very big chinese encodings
            jp              common japanese encodings
            jp_ext          rarely used but big japanese encodings
            kr              korean encodings
     --enable-xim (default: on)
         per character from 2 to 4 bytes. X11 fonts do not yet support these
         extra characters, but Xft does.
         Please note that rxvt-unicode can store unicode code points >65535
         even without this flag, but the number of such characters is limited
-        to a view thousand (shared with combining characters, see next
+        to a few thousand (shared with combining characters, see next
         switch), and right now rxvt-unicode cannot display them
         (input/output and cut&paste still work, though).
     --enable-combining (default: on)
         Enable automatic composition of combining characters into composite
     --with-res-name=NAME (default: urxvt)
         Use the given name as default application name when reading
         resources. Specify --with-res-name=rxvt to replace rxvt.
-    --with-res-class=CLASS /default: URxvt)
+    --with-res-class=CLASS (default: URxvt)
         Use the given class as default application class when reading
         resources. Specify --with-res-class=Rxvt to replace rxvt.
     --enable-utmp (default: on)
         Write user and tty to utmp file (used by programs like w) at start
     --enable-lastlog (default: on)
         Write user and tty to lastlog file (used by programs like lastlogin)
         at start of rxvt execution. This option requires --enable-utmp to
         also be specified.
-    --enable-xpm-background (default: on)
+    --enable-afterimage (default: on)
-        Add support for XPM background pixmaps.
+        Add support for libAfterImage to be used for transparency and
+        background images. It adds support for many file formats including
+        JPG, PNG, SVG, TIFF, GIF, XPM, BMP, ICO, XCF, TGA and AfterStep
+        image XML
+        (<http://www.afterstep.org/visualdoc.php?show=asimagexml>).
+        This option also adds such eye candy as blending an image over the
+        root background, as well as dynamic scaling and bluring of
+        background images.
+        Note that with this option enabled, rxvt's memory footprint might
+        increase by a few megabytes even if no extra features are used
+        (mostly due to third-party libraries used by libAI). Memory
+        footprint may somewhat be lowered if libAfterImage is configured
+        without support for SVG.
     --enable-transparency (default: on)
-        Add support for inheriting parent backgrounds thus giving a fake
+        Add support for backgrounds, creating illusion of transparency in
-        transparency to the term.
+        the term.
     --enable-fading (default: on)
-        Add support for fading the text when focus is lost (requires
+        Add support for fading the text when focus is lost.
-        "--enable-transparency").
-    --enable-tinting (default: on)
-        Add support for tinting of transparent backgrounds (requires
-        "--enable-transparency").
     --enable-rxvt-scroll (default: on)
         Add support for the original rxvt scrollbar.
     --enable-next-scroll (default: on)
     --enable-plain-scroll (default: on)
         Add support for a very unobtrusive, plain-looking scrollbar that is
         the favourite of the rxvt-unicode author, having used it for many
         years.
-    --enable-ttygid (default: off)
-        Change tty device setting to group "tty" - only use this if your
-        system uses this type of security.
     --disable-backspace-key
         Removes any handling of the backspace key by us - let the X server
         do it.
     --disable-delete-key
         A non-exhaustive list of features enabled by "--enable-frills"
         (possibly in combination with other switches) is:
           MWM-hints
           EWMH-hints (pid, utf8 names) and protocols (ping)
+          urgency hint
           seperate underline colour (-underlineColor)
           settable border widths and borderless switch (-w, -b, -bl)
           visual depth selection (-depth)
           settable extra linespacing /-lsp)
-          iso-14755-2 and -3, and visual feedback
+          iso-14755 5.1 (basic) support
           tripleclickwords (-tcw)
           settable insecure mode (-insecure)
           keysym remapping support
           cursor blinking and underline cursor (-cb, -uc)
           XEmbed support (-embed)
           user-pty (-pty-fd)
           hold on exit (-hold)
+          compile in built-in block graphics
           skip builtin block graphics (-sbg)
           separate highlightcolor support (-hc)
         It also enables some non-essential features otherwise disabled, such
         as:
           some round-trip time optimisations
           nearest color allocation on pseudocolor screens
-          UTF8_STRING supporr for selection
+          UTF8_STRING support for selection
           sgr modes 90..97 and 100..107
           backindex and forwardindex escape sequences
-          view change/zero scorllback esacpe sequences
+          view change/zero scrollback escape sequences
           locale switching escape sequence
           window op and some xterm/OSC escape sequences
           rectangular selections
           trailing space removal for selections
           verbose X error handling
     --enable-keepscrolling (default: on)
         Add support for continual scrolling of the display when you hold the
         mouse button down on a scrollbar arrow.
+    --enable-selectionscrolling (default: on)
+        Add support for scrolling when the selection moves to the top or
+        bottom of the screen.
     --enable-mousewheel (default: on)
         Add support for scrolling via mouse wheel or buttons 4 & 5.
     --enable-slipwheeling (default: on)
         Add support for continual scrolling (using the mouse wheel as an
         accelerator) while the control key is held down. This option
         requires --enable-mousewheel to also be specified.
-    --disable-new-selection
-        Remove support for mouse selection style like that of xterm.
-    --enable-dmalloc (default: off)
-        Use Gray Watson's malloc - which is good for debugging See
-        <http://www.letters.com/dmalloc/> for details If you use either this
-        or the next option, you may need to edit src/Makefile after
-        compiling to point DINCLUDE and DLIB to the right places.
-        You can only use either this option and the following (should you
-        use either) .
-    --enable-dlmalloc (default: off)
-        Use Doug Lea's malloc - which is good for a production version See
-        <http://g.oswego.edu/dl/html/malloc.html> for details.
-    --enable-smart-resize (default: on)
+    --enable-smart-resize (default: off)
-        Add smart growth/shrink behaviour when changing font size via hot
+        Add smart growth/shrink behaviour when resizing. This should keep
-        keys. This should keep the window corner which is closest to a
+        the window corner which is closest to a corner of the screen in a
-        corner of the screen in a fixed position.
+        fixed position.
+    --enable-text-blink (default: on)
+        Add support for blinking text.
     --enable-pointer-blank (default: on)
         Add support to have the pointer disappear when typing or inactive.
     --enable-perl (default: on)
         Enable an embedded perl interpreter. See the rxvtperl(3) manpage
         (doc/rxvtperl.txt) for more info on this feature, or the files in
         src/perl-ext/ for the extensions that are installed by default. The
         perl interpreter that is used can be specified via the "PERL"
-        environment variable when running configure.
+        environment variable when running configure. Even when compiled in,
+        perl will *not* be initialised when all extensions have been
+        disabled "-pe "" --perl-ext-common """, so it should be safe to
+        enable from a resource standpoint.
+    --with-afterimage-config=DIR
+        Look for the libAfterImage config script in DIR.
     --with-name=NAME (default: urxvt)
         Set the basename for the installed binaries, resulting in "urxvt",
         "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".
         to PATH.
     --with-x
         Use the X Window System (pretty much default, eh?).
-    --with-xpm-includes=DIR
-        Look for the XPM includes in DIR.
-    --with-xpm-library=DIR
-        Look for the XPM library in DIR.
-    --with-xpm
-        Not needed - define via --enable-xpm-background.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/README.configure (file contents): Revision 1.51 by root, Thu Nov 2 17:37:47 2006 UTC vs. Revision 1.60 by root, Fri Dec 14 06:05:40 2007 UTC

Diff Legend

Comparing rxvt-unicode/README.configure (file contents):
Revision 1.51 by root, Thu Nov 2 17:37:47 2006 UTC vs.
Revision 1.60 by root, Fri Dec 14 06:05:40 2007 UTC