[ViewVC] Diff of: cvs/rxvt-unicode/README.configure

Comparing rxvt-unicode/README.configure (file contents):
Revision 1.34 by root, Mon Jan 2 15:11:05 2006 UTC vs.
Revision 1.56 by root, Wed Aug 1 18:38:15 2007 UTC

 CONFIGURE OPTIONS
     General hint: if you get compile errors, then likely your configuration
     hasn't been tested well. Either try with "--enable-everything" or use
-    the ./reconf script as a base for experiments. ./reconf is used by
+    the default configuration (i.e. "--enable-xxx" or "--disable-xxx"). Of
-    myself, so it should generally be a working config. Of course, you
-    should always report when a combination doesn't work, so it can be
+    course, you should always report when a combination doesn't work, so it
-    fixed. Marc Lehmann <rxvt@schmorp.de>.
+    can be fixed. Marc Lehmann <rxvt@schmorp.de>.
     All
     --enable-everything
         Add (or remove) support for all non-multichoice options listed in
         about 700kB), but it doesn't increase memory usage unless you use a
         font requiring one of these encodings.
            all             all available codeset groups
            zh              common chinese encodings
-           zh_ext          rarely used but very big chinese encodigs
+           zh_ext          rarely used but very big chinese encodings
            jp              common japanese encodings
            jp_ext          rarely used but big japanese encodings
            kr              korean encodings
     --enable-xim (default: on)
         Add support for XIM (X Input Method) protocol. This allows using
         alternative input methods (e.g. kinput2) and will also correctly set
         up the input for people using dead keys or compose keys.
     --enable-unicode3 (default: off)
+        Recommended to stay off unless you really need non-BMP characters.
         Enable direct support for displaying unicode codepoints above 65535
         (the basic multilingual page). This increases storage requirements
         per character from 2 to 4 bytes. X11 fonts do not yet support these
         extra characters, but Xft does.
         Please note that rxvt-unicode can store unicode code points >65535
         even without this flag, but the number of such characters is limited
-        to a view thousand (shared with combining characters, see next
+        to a few thousand (shared with combining characters, see next
         switch), and right now rxvt-unicode cannot display them
         (input/output and cut&paste still work, though).
     --enable-combining (default: on)
         Enable automatic composition of combining characters into composite
         accents are encoded as seperate unicode characters. This is done by
         using precomposited characters when available or creating new
         pseudo-characters when no precomposed form exists.
         Without --enable-unicode3, the number of additional precomposed
-        characters is rather limited (2048, if this is full, rxvt-unicode
+        characters is somewhat limited (the 6400 private use characters will
-        will use the private use area, extending the number of combinations
-        to 8448). With --enable-unicode3, no practical limit exists.
+        be (ab-)used). With --enable-unicode3, no practical limit exists.
         This option will also enable storage (but not display) of characters
         beyond plane 0 (>65535) when --enable-unicode3 was not specified.
         The combining table also contains entries for arabic presentation
     --enable-lastlog (default: on)
         Write user and tty to lastlog file (used by programs like lastlogin)
         at start of rxvt execution. This option requires --enable-utmp to
         also be specified.
-    --enable-xpm-background (default: off)
+    --enable-xpm-background (default: on)
         Add support for XPM background pixmaps.
+    --enable-afterimage (default: on)
+        Add support for libAfterImage to be used for transparency and
+        background images. It adds support for many file formats including
+        JPG, PNG, SVG, TIFF, GIF, XPM, BMP, ICO, XCF, TGA and AfterStep
+        image XML
+        (<http://www.afterstep.org/visualdoc.php?show=asimagexml>).
+        This option also adds such eye candy as blending an image over the
+        root background, as well as dynamic scaling and bluring of
+        background images.
+        Note that with this option enabled, rxvt's memory footprint might
+        increase by a few megabytes even if no extra features are used
+        (mostly due to third-party libraries used by libAI). Memory
+        footprint may somewhat be lowered if libAfterImage is configured
+        without support for SVG.
-    --enable-transparency (default: off)
+    --enable-transparency (default: on)
         Add support for inheriting parent backgrounds thus giving a fake
         transparency to the term.
     --enable-fading (default: on)
-        Add support for fading the text when focus is lost (requires
+        Add support for fading the text when focus is lost.
-        "--enable-transparency").
     --enable-tinting (default: on)
         Add support for tinting of transparent backgrounds (requires
         "--enable-transparency").
-    --enable-menubar (default: off)
-        Add support for our menu bar system (this interacts badly with
-        dynamic locale switching currently).
     --enable-rxvt-scroll (default: on)
         Add support for the original rxvt scrollbar.
     --enable-next-scroll (default: on)
     --enable-plain-scroll (default: on)
         Add support for a very unobtrusive, plain-looking scrollbar that is
         the favourite of the rxvt-unicode author, having used it for many
         years.
-    --enable-half-shadow (default: off)
-        Make shadows on the scrollbar only half the normal width & height.
-        only applicable to rxvt scrollbars.
     --enable-ttygid (default: off)
         Change tty device setting to group "tty" - only use this if your
         system uses this type of security.
     --disable-backspace-key
         Removes any handling of the delete key by us - let the X server do
         it.
     --disable-resources
         Removes any support for resource checking.
-    --enable-xgetdefault
-        Make resources checking via XGetDefault() instead of our small
-        version which only checks ~/.Xdefaults, or if that doesn't exist
-        then ~/.Xresources.
-        Please note that nowadays, things like XIM will automatically pull
-        in and use the full X resource manager, so the overhead of using it
-        might be very small, if nonexistant.
-    --enable-strings (default: off)
-        Add support for our possibly faster memset() function and other
-        various routines, overriding your system's versions which may have
-        been hand-crafted in assembly or may require extra libraries to link
-        in. (this breaks ANSI-C rules and has problems on many GNU/Linux
-        systems).
     --disable-swapscreen
         Remove support for secondary/swap screen.
     --enable-frills (default: on)
         A non-exhaustive list of features enabled by "--enable-frills"
         (possibly in combination with other switches) is:
           MWM-hints
           EWMH-hints (pid, utf8 names) and protocols (ping)
+          urgency hint
-          seperate underline colour
+          seperate underline colour (-underlineColor)
-          settable border widths and borderless switch
+          settable border widths and borderless switch (-w, -b, -bl)
+          visual depth selection (-depth)
-          settable extra linespacing
+          settable extra linespacing /-lsp)
-          iso-14755-2 and -3, and visual feedback
+          iso-14755 5.1 (basic) support
+          tripleclickwords (-tcw)
+          settable insecure mode (-insecure)
+          keysym remapping support
+          cursor blinking and underline cursor (-cb, -uc)
+          XEmbed support (-embed)
+          user-pty (-pty-fd)
+          hold on exit (-hold)
+          skip builtin block graphics (-sbg)
+          separate highlightcolor support (-hc)
+        It also enables some non-essential features otherwise disabled, such
+        as:
+          some round-trip time optimisations
+          nearest color allocation on pseudocolor screens
+          UTF8_STRING support for selection
+          sgr modes 90..97 and 100..107
-          backindex and forwardindex escape sequence
+          backindex and forwardindex escape sequences
+          view change/zero scrollback escape sequences
+          locale switching escape sequence
           window op and some xterm/OSC escape sequences
-          tripleclickwords
+          rectangular selections
-          settable insecure mode
+          trailing space removal for selections
-          keysym remapping support
+          verbose X error handling
-          cursor blinking and underline cursor
-          -embed, -pty-fd and -hold options
     --enable-iso14755 (default: on)
         Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt).
         Basic support (section 5.1) is enabled by "--enable-frills", while
         support for 5.2, 5.3 and 5.4 is enabled with this switch.
     --enable-keepscrolling (default: on)
         Add support for continual scrolling of the display when you hold the
         mouse button down on a scrollbar arrow.
+    --enable-selectionscrolling (default: on)
+        Add support for scrolling when the selection moves to the top or
+        bottom of the screen.
     --enable-mousewheel (default: on)
         Add support for scrolling via mouse wheel or buttons 4 & 5.
     --enable-slipwheeling (default: on)
         Add support for continual scrolling (using the mouse wheel as an
         accelerator) while the control key is held down. This option
         requires --enable-mousewheel to also be specified.
-    --disable-new-selection
-        Remove support for mouse selection style like that of xterm.
-    --enable-dmalloc (default: off)
-        Use Gray Watson's malloc - which is good for debugging See
-        http://www.letters.com/dmalloc/ for details If you use either this
-        or the next option, you may need to edit src/Makefile after
-        compiling to point DINCLUDE and DLIB to the right places.
-        You can only use either this option and the following (should you
-        use either) .
-    --enable-dlmalloc (default: off)
-        Use Doug Lea's malloc - which is good for a production version See
-        <http://g.oswego.edu/dl/html/malloc.html> for details.
-    --enable-smart-resize (default: on)
+    --enable-smart-resize (default: off)
-        Add smart growth/shrink behaviour when changing font size via hot
+        Add smart growth/shrink behaviour when resizing. This should keep
-        keys. This should keep the window corner which is closest to a
+        the window corner which is closest to a corner of the screen in a
-        corner of the screen in a fixed position.
+        fixed position.
     --enable-pointer-blank (default: on)
         Add support to have the pointer disappear when typing or inactive.
+    --enable-perl (default: on)
+        Enable an embedded perl interpreter. See the rxvtperl(3) manpage
+        (doc/rxvtperl.txt) for more info on this feature, or the files in
+        src/perl-ext/ for the extensions that are installed by default. The
+        perl interpreter that is used can be specified via the "PERL"
+        environment variable when running configure. Even when compiled in,
+        perl will *not* be initialised when all extensions have been
+        disabled "-pe "" --perl-ext-common """, so it should be safe to
+        enable from a resource standpoint.
+    --with-afterimage-config=DIR
+        Look for the libAfterImage config script in DIR.
     --with-name=NAME (default: urxvt)
         Set the basename for the installed binaries, resulting in "urxvt",
         "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/README.configure (file contents): Revision 1.34 by root, Mon Jan 2 15:11:05 2006 UTC vs. Revision 1.56 by root, Wed Aug 1 18:38:15 2007 UTC

Diff Legend

Comparing rxvt-unicode/README.configure (file contents):
Revision 1.34 by root, Mon Jan 2 15:11:05 2006 UTC vs.
Revision 1.56 by root, Wed Aug 1 18:38:15 2007 UTC