--- rxvt-unicode/configure.ac	2007/06/26 00:40:18	1.56
+++ rxvt-unicode/configure.ac	2007/11/18 01:31:38	1.84
@@ -19,6 +19,7 @@
 AC_SUBST(DATE)dnl
 AC_SUBST(LSMDATE)dnl
 AC_SUBST(LIBVERSION)dnl
+
 echo ""
 echo "configuring for rxvt $VERSION"
 echo ""
@@ -48,10 +49,7 @@
    LINKER="$CC"
    AC_LINK_IFELSE(
       [AC_LANG_PROGRAM([struct test { }; void f() try { throw new test; } catch (...) { throw; }],[])],
-      [
-         AC_MSG_RESULT(ok)
-         CXXLIB="-lsupc++"
-      ],
+      [AC_MSG_RESULT(ok)],
       [
          AC_MSG_RESULT([no, making everything bigger and slower])
          LIBS="$save_LIBS"
@@ -61,14 +59,13 @@
    CXX="$save_CXX"
 fi
 AC_SUBST(LINKER,[$LINKER])
-AC_SUBST(CXXLIB)
 
 dnl# --------------------------------------------------------------------------
 dnl# Supply default CXXFLAGS, if not specified by `CXXFLAGS=flags ./configure'
 dnl#
 if test -z "$orig_CXXFLAGS"; then
   if test x$GCC = xyes && test "x$GXX" = xyes; then
-     CXXFLAGS="-g -O3 -fno-threadsafe-statics -fno-enforce-eh-specs"
+    CXXFLAGS="-g -O3 -fno-threadsafe-statics -fno-enforce-eh-specs"
     AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], [], [CXXFLAGS="-g -O3"])
   else
     CXXFLAGS="-O"
@@ -101,7 +98,6 @@
 
 support_frills=yes
 support_inheritpixmap=yes
-support_tinting=yes
 support_fading=yes
 support_keepscrolling=yes
 support_selectionscrolling=yes
@@ -114,7 +110,6 @@
 support_scroll_xterm=yes
 support_scroll_plain=yes
 support_xim=yes
-support_xpm=yes
 support_afterimage=yes
 support_afterstep=yes
 support_xft=yes
@@ -144,7 +139,6 @@
     if test x$enableval = xno; then
        support_frills=no
        support_inheritpixmap=no
-       support_tinting=no
        support_fading=no
        support_keepscrolling=no
        support_selectionscrolling=no
@@ -160,7 +154,6 @@
        support_utmp=no
        support_wtmp=no
        support_xim=no
-       support_xpm=no
        support_afterimage=no
        support_afterstep=no
        support_xft=no
@@ -175,7 +168,6 @@
     if test x$enableval = xyes; then
        support_frills=yes
        support_inheritpixmap=yes
-       support_tinting=yes
        support_fading=yes
        support_keepscrolling=yes
        support_selectionscrolling=yes
@@ -191,7 +183,6 @@
        support_utmp=yes
        support_wtmp=yes
        support_xim=yes
-       support_xpm=yes
        support_afterimage=yes
        support_afterstep=yes
        support_xft=yes
@@ -205,6 +196,22 @@
     fi
   ])
 
+WARNINGS=no
+AC_ARG_ENABLE(warnings,
+  [  --enable-warnings       turn on g++ warnings],
+  [if test x$enableval = xyes; then
+    WARNINGS=yes
+  fi])
+if test x$GXX = xyes; then
+  if test $WARNINGS = yes; then
+    save_CXXFLAGS="$CXXFLAGS"
+    CXXFLAGS="$CXXFLAGS -Wall -Wno-sign-compare -Wno-reorder -Wno-non-virtual-dtor"
+    AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[])], [], [CXXFLAGS="$save_CXXFLAGS"])
+  else
+    CXXFLAGS="$CXXFLAGS -w"
+  fi
+fi
+
 AC_ARG_ENABLE(unicode3,
   [  --enable-unicode3       use 21 instead of 16 bits to represent unicode characters],
   [if test x$enableval = xyes -o x$enableval = xno; then
@@ -229,12 +236,6 @@
     support_styles=$enableval
   fi])
 
-AC_ARG_ENABLE(xpm-background,
-  [  --enable-xpm-background enable background pixmaps],
-  [if test x$enableval = xyes -o x$enableval = xno; then
-    support_xpm=$enableval
-  fi])
-
 AC_ARG_ENABLE(afterimage,
   [  --enable-afterimage enable integration with libAfterImage for background images],
   [if test x$enableval = xyes -o x$enableval = xno; then
@@ -247,11 +248,11 @@
     afterimage_config=$withval/afterimage-config
   fi])
 
-AC_ARG_ENABLE(afterstep,
-  [  --enable-afterstep enable integration with AfterStep window manager],
-  [if test x$enableval = xyes -o x$enableval = xno; then
-    support_afterstep=$enableval
-  fi])
+dnl AC_ARG_ENABLE(afterstep,
+dnl   [  --enable-afterstep enable integration with AfterStep window manager],
+dnl   [if test x$enableval = xyes -o x$enableval = xno; then
+dnl     support_afterstep=$enableval
+dnl   fi])
 
 AC_ARG_ENABLE(transparency,
   [  --enable-transparency   enable transparent backgrounds],
@@ -259,12 +260,6 @@
     support_inheritpixmap=$enableval
   fi])
 
-AC_ARG_ENABLE(tinting,
-  [  --enable-tinting        enable tinting of transparent bg],
-  [if test x$enableval = xyes -o x$enableval = xno; then
-    support_tinting=$enableval
-  fi])
-
 AC_ARG_ENABLE(fading,
   [  --enable-fading         enable colors fading when off focus],
   [if test x$enableval = xyes -o x$enableval = xno; then
@@ -302,7 +297,7 @@
   fi])
 
 AC_ARG_WITH(codesets,
-  [  --with-codesets=NAME,.. compile in additional codesets (jp,jp_ext,kr,zh,zh_ext,all)],
+  [  --with-codesets=CS,...  compile in additional codesets (jp,jp_ext,kr,zh,zh_ext,all)],
   [codesets="$withval"])
 
 AC_ARG_ENABLE(xim,
@@ -337,7 +332,7 @@
 
 RESFALLBACK=Rxvt
 AC_ARG_ENABLE(fallback,
-  [  --enable-fallback(=CLASS) fall back on CLASS resources in addition to URxvt ones (default: Rxvt)],
+  [  --enable-fallback@<:@=CLASS@:>@ fall back on CLASS resources in addition to URxvt ones (default: Rxvt)],
   [
    test x$enableval = xyes && enableval=Rxvt
    test x$enableval = xno  && enableval=
@@ -406,7 +401,7 @@
   fi])
 
 AC_ARG_ENABLE(slipwheeling,
-  [  --enable-slipwheeling   enable slip wheel scrolling     (requires previous)],
+  [  --enable-slipwheeling   enable slip wheel scrolling (requires --enable-mousewheel)],
   [if test x$enableval = xyes -o x$enableval = xno; then
     support_mouseslipwheel=$enableval
   fi])
@@ -443,7 +438,12 @@
 
 dnl# --------------------------------------------------------------------------
 
-AC_PATH_PROG(TIC, tic)
+LIBEV_M4_AVOID_LIBRT=1
+m4_include([libev/libev.m4])
+
+dnl# --------------------------------------------------------------------------
+
+AC_PATH_PROG(TIC, tic, :)
 
 dnl# need a neat way to detect SVR4 or its features
 dnl# in src/command.c we use these functions:
@@ -460,12 +460,9 @@
 
 AC_PATH_XTRA
 
-dnl# the only reasonable way to find libXpm is do-it-yourself
-dnl# only check if we want xpm-background
-
-LIBAFTERIMAGE_CFLAGS=
+AFTERIMAGE_CFLAGS=
 AFTERIMAGE_LIBS=
-have_afterimage=
+AFTERIMAGE_VERSION=
 
 if test x$support_afterimage = xyes; then
   support_afterimage=no
@@ -473,27 +470,28 @@
   if test "x$afterimage_config" = "x" ; then
     AC_PATH_PROG(afterimage_config, afterimage-config, no)
   fi
-
-  AC_MSG_CHECKING(for libAfterImage)
-  if $afterimage_config --version >/dev/null 2>&1 ; then
-    LIBAFTERIMAGE_CFLAGS=`$afterimage_config --cflags`
-    AFTERIMAGE_LIBS=`$afterimage_config --libs`
-    if test "x$AFTERIMAGE_LIBS" != "x"; then
-      support_afterimage=yes
+  if test "x$afterimage_config" != "xno" ; then
+    AC_MSG_CHECKING(for libAfterImage version >= 1.15)
+    xAFTERIMAGE_VERSION=`$afterimage_config --version`
+    if test -n "$xAFTERIMAGE_VERSION" ; then
+      xAFTERIMAGE_CFLAGS=`$afterimage_config --cflags`
+      xAFTERIMAGE_LIBS=`$afterimage_config --libs`
+      if test "x$xAFTERIMAGE_LIBS" != "x"; then
+        libai_ver_major=`echo $xAFTERIMAGE_VERSION | cut -f 1 -d .`
+        libai_ver_minor=`echo $xAFTERIMAGE_VERSION | cut -f 2 -d .`
+        if test $libai_ver_major -gt 1 -o \( $libai_ver_major -eq 1 -a $libai_ver_minor -ge 15 \); then
+          support_afterimage=yes
+          AFTERIMAGE_CFLAGS="$xAFTERIMAGE_CFLAGS"
+          AFTERIMAGE_LIBS="$xAFTERIMAGE_LIBS"
+          AFTERIMAGE_VERSION="$xAFTERIMAGE_VERSION"
+        fi
+      fi
+    fi
+    if test "x$support_afterimage" = "xyes"; then
+      AC_MSG_RESULT($AFTERIMAGE_LIBS)
+    else
+      AC_MSG_RESULT(no)
     fi
-  fi
-
-  if test "x$support_afterimage" = "xyes"; then
-    AC_MSG_RESULT($AFTERIMAGE_LIBS)
-  else
-    AC_MSG_RESULT(no)
-  fi
-fi
-
-if test x$support_afterimage != xyes -a x$support_xpm = xyes ; then
-  VT_FIND_LIBXPM
-  if test x$no_xpm = xyes; then
-    support_xpm=needsmanualspecification
   fi
 fi
 
@@ -531,56 +529,11 @@
 #include <termios.h>
 #endif]], [[int a = ECHO;]])],[rxvt_cv_header_sysioctl=yes],[rxvt_cv_header_sysioctl=no])])
 
-dnl# ELF systems may want to store paths for dynamic libraries.
-dnl# Lets see if the compiler can accept "-Rpath" or "-Wl,-Rpath"
-dnl# At least one version of SunOS wants "-R path" but it's not checked yet.
-if test -n "$GCC"; then
-  LDARG="-Wl,"
-else
-  LDARG=""
-fi
-changequote(, )dnl
-R_TRANSLATE='s/-L\([^ ]*\)/-L\1 '$LDARG'-rpath '$LDARG'\1/g'
-changequote([, ])dnl
-
-ac_save_CFLAGS=$CFLAGS
-ac_save_LIBS=$LIBS
-CFLAGS="$CFLAGS $X_CFLAGS"
-LIBS=`echo "$LIBS $X_LIBS $X_EXTRA_LIBS -lX11" | sed "$R_TRANSLATE"`
-AC_CACHE_CHECK([for -rpath dynamic library path recording], rxvt_cv_rpath,
-[AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <X11/Xlib.h>
-#include <stdlib.h>
-main()
-{
-    exit(0);
-    (void) XOpenDisplay("foobar");
-}]])],[rxvt_cv_rpath=yes],[rxvt_cv_rpath=no],[dnl
-  AC_MSG_WARN(You may need to check the LIBS line)])])
-if test x$rxvt_cv_rpath != xyes; then
-  changequote(, )dnl
-  R_TRANSLATE='s/-L\([^ ]*\)/-L\1 '$LDARG'-R\1/g'
-  changequote([, ])dnl
-  LIBS=`echo "$ac_save_LIBS $X_LIBS $X_EXTRA_LIBS -lX11" | sed "$R_TRANSLATE"`
-  AC_CACHE_CHECK([for -R dynamic library path recording], rxvt_cv_R,
-[AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <X11/Xlib.h>
-#include <stdlib.h>
-main()
-{
-    exit(0);
-    (void) XOpenDisplay("foobar");
-}]])],[rxvt_cv_R=yes],[rxvt_cv_R=no],[rxvt_cv_R=no])])
-  if test x$rxvt_cv_R != xyes; then
-    LIBS="$ac_save_LIBS $X_LIBS $X_EXTRA_LIBS -lX11"
-  fi
-fi
-
 AC_CACHE_CHECK([for XPointer], rxvt_cv_xpointer,
 [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <X11/Xlib.h>]], [[XPointer dummy;]])],[rxvt_cv_xpointer=yes],[rxvt_cv_xpointer=no])])
 if test x$rxvt_cv_xpointer = xyes; then
   AC_DEFINE(HAVE_XPOINTER, 1, Define if you have XPointer typedef)
 fi
-LIBS=$ac_save_LIBS
-CFLAGS=$ac_save_CFLAGS
 
 AC_CACHE_CHECK([for XLIB_ILLEGAL_ACCESS], rxvt_xlib_illegal_access,
 [AC_COMPILE_IFELSE(
@@ -697,56 +650,49 @@
 AC_TYPE_SIGNAL
 dnl> AC_FUNC_VPRINTF
 
-AC_CHECK_FUNCS( \
-	unsetenv \
-	setutent \
-	on_exit \
-)
+AC_CHECK_FUNCS(unsetenv)
 
 UTMP_CHECK
 
 dnl# --------------------------------------------------------------------------
 
-dnl# find ttys/ttytab
-AC_CACHE_CHECK(where ttys/ttytab is located, rxvt_cv_path_ttytab,
-[for ttys_file in   dnl
-  /etc/ttys /etc/ttytab;
-do
-  if test -f "$ttys_file" ; then
-    rxvt_cv_path_ttytab=$ttys_file
-    break
-  fi
-done
-])
-if test x$rxvt_cv_path_ttytab != x; then
-  AC_DEFINE_UNQUOTED(TTYTAB_FILENAME, "$rxvt_cv_path_ttytab", Define location of ttys/ttytab)
-fi
-
 dnl# --------------------------------------------------------------------------
 dnl# --------------------------------------------------------------------------
 
 dnl# this is a really hack test for some basic Xlocale stuff
-ac_save_LIBS=$LIBS
-ac_save_CFLAGS=$CFLAGS
+save_LIBS=$LIBS
+save_CFLAGS=$CFLAGS
 CFLAGS="$CFLAGS $X_CFLAGS"
 LIBS="$LIBS $X_LIBS $X_EXTRA_LIBS -lX11"
-if test x$rxvt_cv_rpath = xyes -o x$rxvt_cv_R = xyes; then
-  LIBS=`echo $LIBS | sed "$R_TRANSLATE"`
-fi
-AC_CACHE_CHECK(for working Xlocale, rxvt_cv_func_xlocale,
-[AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <X11/Xlib.h>
-#include <stdlib.h>
-main() {
-char *p;
-if ((p = XSetLocaleModifiers("@im=none")) != NULL && *p)
-exit (XSupportsLocale() ? 0 : 1);
-else
-exit (1);}]])],[dnl
-  rxvt_cv_func_xlocale=yes],[rxvt_cv_func_xlocale=no],[dnl
-  :])])
 if test x$support_xim = xyes; then
+  AC_CACHE_CHECK(for working Xlocale, rxvt_cv_func_xlocale,
+  [AC_RUN_IFELSE([AC_LANG_SOURCE([[#include <X11/Xlib.h>
+  #include <stdlib.h>
+  main() {
+  char *p;
+  if ((p = XSetLocaleModifiers("@im=none")) != NULL && *p)
+  exit (XSupportsLocale() ? 0 : 1);
+  else
+  exit (1);}]])],[dnl
+    rxvt_cv_func_xlocale=yes],[rxvt_cv_func_xlocale=no],[dnl
+    :])])
   if test x$rxvt_cv_func_xlocale = xyes; then
     AC_DEFINE(USE_XIM, 1, Define if you want to have XIM (X Input Method) protocol support - required for multibyte characters input)
+    AC_CACHE_CHECK(for broken XIM callback, rxvt_broken_ximcb,
+    [AC_COMPILE_IFELSE([
+    #include <X11/Xlib.h>
+
+    void im_destroy_cb (XIC unused1, XPointer client_data, XPointer unused3);
+
+    void f() {
+      XIMCallback cb;
+      cb.callback = im_destroy_cb;
+    }
+    ],rxvt_broken_ximcb=yes,rxvt_broken_ximcb=no)])
+
+    if test x$rxvt_broken_ximcb = xyes; then
+       AC_DEFINE(XIMCB_PROTO_BROKEN, 1, Define if your XIMCallback specifies XIC as first type.)
+    fi
   fi
 fi
 
@@ -756,8 +702,8 @@
 if test x$rxvt_cv_func_xsetlocale = xyes; then
   AC_DEFINE(HAVE_XSETLOCALE, 1, Define if setlocale (defined to Xsetlocale) works)
 fi
-LIBS=$ac_save_LIBS
-CFLAGS=$ac_save_CFLAGS
+LIBS=$save_LIBS
+CFLAGS=$save_CFLAGS
 
 AC_CACHE_CHECK(for working plain setlocale, rxvt_cv_func_setlocale,
 [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <clocale>]], [[setlocale(LC_CTYPE, "");]])],[rxvt_cv_func_setlocale=yes],[rxvt_cv_func_setlocale=no])])
@@ -773,22 +719,6 @@
 
 SCM_RIGHTS_CHECK
 
-AC_CACHE_CHECK(for broken XIM callback, rxvt_broken_ximcb,
-[AC_COMPILE_IFELSE([
-#include <X11/Xlib.h>
-
-void im_destroy_cb (XIC unused1, XPointer client_data, XPointer unused3);
-
-void f() {
-  XIMCallback cb;
-  cb.callback = im_destroy_cb;
-}
-],rxvt_broken_ximcb=yes,rxvt_broken_ximcb=no)])
-
-if test x$rxvt_broken_ximcb = xyes; then
-   AC_DEFINE(XIMCB_PROTO_BROKEN, 1, Define if your XIMCallback specifies XIC as first type.)
-fi
-
 PTY_CHECK
 
 TTY_GROUP_CHECK
@@ -799,18 +729,21 @@
 if test x$support_xft = xyes; then
   AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
   if test $PKG_CONFIG != no && $PKG_CONFIG --exists xft; then
-    LIBS="$LIBS `$PKG_CONFIG xft --libs`"
+    X_LIBS="`$PKG_CONFIG xft --libs` $X_LIBS"
     CPPFLAGS="$CPPFLAGS `$PKG_CONFIG xft --cflags`"
   else
     AC_PATH_PROG(XFT_CONFIG, xft-config, no)
     if test $XFT_CONFIG != no; then
-      LIBS="$LIBS `$XFT_CONFIG --libs`"
+      X_LIBS="`$XFT_CONFIG --libs` $X_LIBS"
       CPPFLAGS="$CPPFLAGS `$XFT_CONFIG --cflags`"
     fi
   fi
 
+  save_LIBS="$LIBS"
+  LIBS="$LIBS $X_LIBS"
   AC_CHECK_HEADERS(X11/Xft/Xft.h,,[support_xft=no])
-  AC_CHECK_LIB(Xft,XftDrawString32,,[support_xft=no])
+  AC_CHECK_LIB(Xft,XftDrawString32,:,[support_xft=no])
+  LIBS="$save_LIBS"
 
   if test x$support_xft = xyes; then
     AC_DEFINE(XFT, 1, Define to enable xft support)
@@ -828,9 +761,6 @@
 if test x$support_fading = xyes; then
   AC_DEFINE(OFF_FOCUS_FADING, 1, Define if you want faded colors when focus is lost)
 fi
-if test x$support_tinting = xyes; then
-  AC_DEFINE(TINTING, 1, Define if you want your background to be tinted)
-fi
 if test x$support_inheritpixmap = xyes; then
   AC_DEFINE(ENABLE_TRANSPARENCY, 1, Define if you want your background to use the parent window background)
 fi
@@ -849,17 +779,14 @@
 if test x$support_mouseslipwheel = xyes; then
   AC_DEFINE(MOUSE_SLIP_WHEELING, 1, Define to have CTRL cause wheel events to accelerate scrolling. Release CTRL to halt scrolling)
 fi
-if test x$support_xpm = xyes -o x$support_afterimage = xyes ; then
-  AC_DEFINE(XPM_BACKGROUND, 1, Define if you want to have sexy-looking background pixmaps. Needs libXpm or libAfterImage)
-fi
-
 if test x$support_afterimage = xyes; then
   AC_DEFINE(HAVE_AFTERIMAGE, 1, Define if you want to use libAfterImage for image processing)
+  AC_DEFINE(BG_IMAGE_FROM_FILE, 1, Define if you want to have sexy-looking background pixmaps. Needs libAfterImage)
 fi
 
-if test x$support_afterstep = xyes; then
-  AC_DEFINE(AFTERSTEP_INTEGRATION, 1, Define if you want to integrate with AfterStep window manager)
-fi
+dnl if test x$support_afterstep = xyes; then
+dnl   AC_DEFINE(AFTERSTEP_INTEGRATION, 1, Define if you want to integrate with AfterStep window manager)
+dnl fi
 
 if test x$support_scroll_rxvt = xyes; then
   AC_DEFINE(RXVT_SCROLLBAR, 1, Support Rxvt original style scrollbars)
@@ -948,27 +875,17 @@
 AC_SUBST(IF_PERL)
 AC_SUBST(PERL_O)
 
-if test x$support_perl = xyes; then
-   support_frills=yes
-fi
-
 AC_SUBST(CFLAGS)
 AC_SUBST(CPPFLAGS)
 AC_SUBST(LDFLAGS)
 AC_SUBST(X_CFLAGS)
 
 dnl# Attack the libs
-if test x$rxvt_cv_rpath = xyes -o x$rxvt_cv_R = xyes; then
-  LIBS=`echo $LIBS | sed "$R_TRANSLATE"`
-  X_LIBS=`echo $X_LIBS | sed "$R_TRANSLATE"`
-  X_EXTRA_LIBS=`echo $X_EXTRA_LIBS | sed "$R_TRANSLATE"`
-  XPM_LIBS=`echo $XPM_LIBS | sed "$R_TRANSLATE"`
-fi
 AC_SUBST(LIBS)
 AC_SUBST(X_LIBS)
 AC_SUBST(X_EXTRA_LIBS)
 
-AC_SUBST(LIBAFTERIMAGE_CFLAGS)
+AC_SUBST(AFTERIMAGE_CFLAGS)
 AC_SUBST(AFTERIMAGE_LIBS)
 
 AC_ARG_PROGRAM
@@ -1014,18 +931,6 @@
   Compiler flags:             $CXXFLAGS
   Linker:                     $LINKER"
 
-if test x$support_xpm = xyes; then
-  echo "  Xpm library:                $XPM_LIBS"
-fi
-
-if test x$support_afterimage = xyes; then
-  echo "  AfterImage support:         yes"
-fi
-
-if test x$support_afterstep = xyes; then
-  echo "  AfterStep integration:      yes"
-fi
-
 if test x$term != x; then
   echo "  set TERM to:                $term"
 fi
@@ -1039,17 +944,9 @@
 fi
 echo
 echo "  embedded perl:              $support_perl"
+echo "  libafterimage:              $support_afterimage"
+dnl echo "  AfterStep integration:      $support_afterstep"
 echo
-if test x$support_xpm = xneedsmanualspecification; then
-  echo ".----------------------------------------------------------------."
-  echo ". WARNING: --enable-xpm-background was specified however the     ."
-  echo ".          XPM includes files and libraries could not be found.  ."
-  echo ".          XPM backgrounds are now being DISABLED!  If you want  ."
-  echo ".          to use them you should rerun   configure   with the   ."
-  echo ".          appropriate --with-xpm-includes=/path/to/xpm/includes ."
-  echo ".          and --with-xpm-library=/path/to/xpm/library lines.    ."
-  echo ".----------------------------------------------------------------."
-fi
 if test x$support_xim = xyes -a x$rxvt_cv_func_xlocale = xno; then
   echo ".----------------------------------------------------------------."
   echo ". WARNING: --enable-xim was specified however the locale support ."