--- rxvt-unicode/doc/rxvt.1.html 2005/01/17 01:44:51 1.3 +++ rxvt-unicode/doc/rxvt.1.html 2006/01/25 21:48:47 1.52 @@ -29,7 +29,6 @@
rxvt-unicode, version 4.8, is a colour vt102 terminal +
rxvt-unicode, version 7.3, is a colour vt102 terminal emulator intended as an xterm(1) replacement for users who do not require features such as Tektronix 4014 emulation and toolkit-style configurability. As a result, rxvt-unicode uses much less swap space -- @@ -58,8 +57,10 @@
See rxvt(7)
(try man 7 rxvt
) for a list of frequently
-asked questions and answer to them and some common problems.
See rxvt(7)
(try man 7 rxvt
) for a list of
+frequently asked questions and answer to them and some common
+problems. That document is also accessible on the World-Wide-Web at
+http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html.
+ rxvt -tr -tint blue -sh 40
Please note that you must specify a program with arguments. If you want to +run shell commands, you have to specify the shell, like this:
++ rxvt -e sh -c "shell commands"+
LC_CTYPE
of e.g.
+de_DE.UTF-8
for normal text processing but ja_JP.EUC-JP
for the
+input extension to be able to input japanese characters while staying in
+another locale. resource imLocale.
+Right now, rxvt will first unmap/map the specified window, so it +shouldn't be a top-level window. rxvt will also reconfigure it +quite a bit, so don't expect it to keep some specific state. It's best to +create an extra subwindow for rxvt and leave it alone.
+The window will not be destroyed when rxvt exits.
+It might be useful to know that rxvt will not close file
+descriptors passed to it (except for stdin/out/err, of course), so you
+can use file descriptors to communicate with the programs within the
+terminal. This works regardless of wether the -embed
option was used or
+not.
Here is a short Gtk2-perl snippet that illustrates how this option can be +used (a longer example is in doc/embed):
++ my $rxvt = new Gtk2::Socket; + $rxvt->signal_connect_after (realize => sub { + my $xid = $_[0]->window->get_xid; + system "rxvt -embed $xid &"; + });+
If this switch is given, rxvt will not create any utmp/wtmp +entries and will not tinker with pty/tty permissions - you have to do that +yourself if you want that.
+As an extremely special case, specifying -1
will completely suppress
+pty/tty operations.
Here is a example in perl that illustrates how this option can be used (a +longer example is in doc/pty-fd):
++ use IO::Pty; + use Fcntl;+
+ my $pty = new IO::Pty; + fcntl $pty, F_SETFD, 0; # clear close-on-exec + system "rxvt -pty-fd " . (fileno $pty) . "&"; + close $pty;+
+ # now communicate with rxvt + my $slave = $pty->slave; + while (<$slave>) { print $slave "got <$_>\n" }+
@@ -510,27 +669,34 @@
Note: `rxvt --help' gives a list of all resources (long options) compiled into your version.
-There are two different methods that rxvt can use to get the -Xresource data: using the X libraries (Xrm*-functions) or internal -Xresources reader (~/.Xdefaults). For the first method (ie. -rxvt -h lists XGetDefaults), you can set and change the -resources using X11 tools like xset. Many distribution do also load -settings from the ~/.Xresources file when X starts.
-If compiled with internal Xresources support (i.e. rxvt -h -lists .Xdefaults) then rxvt accepts application defaults -set in XAPPLOADDIR/URxvt (compile-time defined: usually -/usr/lib/X11/app-defaults/URxvt) and resources set in -~/.Xdefaults, or ~/.Xresources if ~/.Xdefaults does not exist. -Note that when reading X resources, rxvt recognizes two -class names: XTerm and URxvt. The class name Rxvt allows -resources common to both rxvt and the original rxvt to be -easily configured, while the class name URxvt allows resources -unique to rxvt, notably colours and key-handling, to be -shared between different rxvt configurations. If no -resources are specified, suitable defaults will be used. Command-line -arguments can be used to override resource settings. The following -resources are allowed:
+You can set and change the resources using X11 tools like xrdb. Many +distribution do also load settings from the ~/.Xresources file when X +starts. rxvt will consult the following files/resources in order, +with later settings overwriting earlier ones:
++ 1. system-wide app-defaults file, either locale-dependent OR global + 2. app-defaults file in $XAPPLRESDIR + 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults + 4. SCREEN_RESOURCES for the current screen + 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>+
Note that when reading X resources, rxvt recognizes two class
+names: Rxvt and URxvt. The class name Rxvt allows resources
+common to both rxvt and the original rxvt to be easily
+configured, while the class name URxvt allows resources unique to
+rxvt, to be shared between different rxvt
+configurations. If no resources are specified, suitable defaults will
+be used. Command-line arguments can be used to override resource
+settings. The following resources are supported (you might want to
+check the rxvtperl(3)
manpage for additional settings by perl
+extensions not documented here):
Each font can either be a standard X11 core font (XLFD) name, with @@ -734,7 +898,7 @@
- URxvt*font: 9x15bold,\ + URxvt.font: 9x15bold,\ -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\ -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \ [codeset=JISX0208]xft:Kochi Gothic:antialias=false, \ @@ -788,6 +952,16 @@ text font will being used for the given style.
The string will be interpreted as if typed into the shell as-is.
+Example:
++ URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)+
This creates a new file in your home directory with the screen contents
+everytime you hit Print
.
987654321
) to effectively disable the timeout.
When the selection extension is in use (the default if compiled in, see
+the rxvtperl(3)
manpage), a suitable regex using these characters
+will be created (if the resource exists, otherwise, no regex will be
+created). In this mode, characters outside ISO-8859-1 can be used.
When the selection extension is not used, only ISO-8859-1 characters can +be used. If not specified, the built-in default is used:
BACKSLASH ```'&()*,;<=?@[]{|} >>
@@ -1048,10 +1256,29 @@LC_CTYPE
of e.g.
+de_DE.UTF-8
for normal text processing but ja_JP.EUC-JP
for the
+input extension to be able to input japanese characters while staying in
+another locale; option -imlocale.
+OverTheSpot
or
+OffTheSpot
. It must be a standard X font set (XLFD patterns separated
+by commas), i.e. it's not in the same format as the other font lists used
+in rxvt. The default will be set-up to chose *any* suitable found
+found, preferably one or two pixels differing in size to the base font.
+option -imfont.
+write(1)
or any other means. Therefore, these sequences are disabled by
+default. (Note that many other terminals, including xterm, have these
+sequences enabled by default, which doesn't make it safer, though).
+
+You can enable them by setting this boolean resource or specifying +-insecure as an option. At the moment, this enables display-answer, +locale, findfont, icon label and window title requests.
The NumLock, Meta and ISOLevel3 modifiers are usually aliased to whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr -keys are being mapped. AppKeypad is a artificial modifier mapped to the +keys are being mapped. AppKeypad is a synthetic modifier mapped to the current application keymap mode state.
Please note that you need to double the \
in resource files, as
+Xlib itself does it's own de-escaping (you can use \033
instead of
+\e
(and so on), which will work with both Xt and rxvt's own
+processing).
You can define a range of keysyms in one shot by providing a string with pattern list/PREFIX/MIDDLE/SUFFIX, where the delimeter `/' should be a character not used by the strings.
@@ -1143,22 +1387,174 @@- URxvt.keysym.M-C-0x61: list|\e<M-C-|abc|>+ URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|>
The above line is equivalent to the following three lines:
- URxvt.keysym.Meta-Control-0x61: \e<M-C-a> - URxvt.keysym.Meta-Control-0x62: \e<M-C-b> - URxvt.keysym.Meta-Control-0x63: \e<M-C-c>+ URxvt.keysym.Meta-Control-0x61: \033<M-C-a> + URxvt.keysym.Meta-Control-0x62: \033<M-C-b> + URxvt.keysym.Meta-Control-0x63: \033<M-C-c> +
If string takes the form of command:STRING
, the specified STRING
+is interpreted and executed as rxvt's control sequence. For
+example the following means ``change the current locale to zh_CN.GBK
+when Control-Meta-c is being pressed'':
+ URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007+
If string takes the form perl:STRING
, then the specified STRING
+is passed to the on_keyboard_command
perl handler. See the rxvtperl(3)
+manpage. For example, the selection extension (activated via
+rxvt -pe selection
) listens for selection:rot13
events:
+ URxvt.keysym.M-C-c: perl:selection:rot13+
Due the the large number of modifier combinations, a defined key mapping
+will match if at at least the specified identifiers are being set, and
+no other key mappings with those and more bits are being defined. That
+means that defining a key map for a
will automatically provide
+definitions for Meta-a
, Shift-a
and so on, unless some of those are defined
+mappings themselves.
Unfortunately, this will override built-in key mappings. For example
+if you overwrite the Insert
key you will disable rxvt's
+Shift-Insert
mapping. To re-enable that, you can poke ``holes'' into the
+user-defined keymap using the builtin:
replacement:
+ URxvt.keysym.Insert: <my insert key sequence> + URxvt.keysym.S-Insert: builtin:+
The first line defines a mapping for Insert
and any combination
+of modifiers. The second line re-establishes the default mapping for
+Shift-Insert
.
If string takes the form of proto:STRING
, the specified STRING is
-interpreted and executed as rxvt's control sequence. For example,
-proto:\033]701;zh_CN.GBK\007
means: change the current locale to
-zh_CN.GBK
.
The following example will map Control-Meta-1 and Control-Meta-2 to
+the fonts suxuseuro
and 9x15bold
, so you can have some limited
+font-switching at runtime:
+ URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]50;9x15bold\007+
Other things are possible, e.g. resizing (see rxvt(7)
for more
+info):
+ URxvt.keysym.M-C-3: command:\033[8;25;80t + URxvt.keysym.M-C-4: command:\033[8;48;110t+
list(s)
of perl extension scripts (default: default
) to
+use in this terminal instance; option -pe.
+Extension names can be prefixed with a -
sign to prohibit using
+them. This can be useful to selectively disable some extensions loaded
+by default, or specified via the perl-ext-common
resource. For
+example, default,-selection
will use all the default extension except
+selection
.
Extension names can also be followed by an argument in angle brackets
+(e.g. searchable-scrollback<M-s>
, which binds the hotkey for
+searchable scorllback to Alt/Meta-s). Mentioning the same extension
+multiple times with different arguments will pass multiple arguments to
+the extension.
Each extension is looked up in the library directories, loaded if +necessary, and bound to the current terminal instance.
+If both of these resources are the empty string, then the perl +interpreter will not be initialized. The idea behind two options is that +perl-ext-common will be used for extensions that should be available to +all instances, while perl-ext is used for specific instances.
+rxvtperl(3)
manpage. Due to security reasons, this resource
+will be ignored when running setuid/setgid.
+perl
resource,
+rxvt will first look in these directories and then in
+/opt/rxvt/lib/urxvt/perl/. Due to security reasons, this resource
+will be ignored when running setuid/setgid.
+See the rxvtperl(3)
manpage.
rxvtperl(3)
manpage for
+details.
+rxvtperl(3)
manpage
+for details.
+M-s
).
+selection-popup
and mark-urls
perl extensions.
+@@ -1182,9 +1578,9 @@ (Alt) key while performing the desired mouse action.
If mouse reporting mode is active, the normal scrollbar actions are disabled -- on the assumption that we are using a fullscreen -application. Instead, pressing Button1 and Button3 sends ESC[6~ -(Next) and ESC[5~ (Prior), respectively. Similarly, clicking on the -up and down arrows sends ESC[A (Up) and ESC[B (Down), +application. Instead, pressing Button1 and Button3 sends ESC [ 6 ~ +(Next) and ESC [ 5 ~ (Prior), respectively. Similarly, clicking on the +up and down arrows sends ESC [ A (Up) and ESC [ B (Down), respectively.
@@ -1196,23 +1592,30 @@
Starting a selection while pressing the Meta key (or Meta+Ctrl keys) -(Compile: frills) will create a rectangular selection instead of a normal -one.
+(Compile: frills) will create a rectangular selection instead of a +normal one. In this mode, every selected row becomes its own line in the +selection, and trailing whitespace is visually underlined and removed from +the selection.Pressing Shift-Insert causes the value of the PRIMARY selection to be +inserted too.
@@ -1221,10 +1624,13 @@
Changing fonts (or font sizes, respectively) via the keypad is not yet supported in rxvt-unicode. Bug me if you need this.
-You can, however, switch fonts at runtime using escape sequences (and -therefore using the menubar), e.g.:
+You can, however, switch fonts at runtime using escape sequences, e.g.:
++ printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"+
You can use keyboard shortcuts, too:
- printf '\e]701;%s\007' "9x15bold,xft:Kochi Gothic"+ URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
rxvt-unicode will automatically re-apply these fonts to the output so far.
@@ -1235,8 +1641,8 @@ first part is available rxvt-unicode has been compiled with
--enable-frills
, the rest is available when rxvt-unicode was compiled
with --enable-iso14755
.
-Start by pressing and holding both Control
and Shift
, then enter
@@ -1251,7 +1657,7 @@
by pressing Control
and Shift
, followed by 6-7-1-D-SPACE-6-5-E-5
,
followed by releasing the modifier keys.
ISO Level 2 Switch
, although your intention might have been to enter a
reverse tab (Shift-Tab).
-With respect to conformance, rxvt-unicode is supposed to be compliant to both scenario A and B of ISO 14755, including part 5.2.
rxvt tries to write an entry into the utmp(5) file so -that it can be seen via the who(1) command, and can accept messages. -To allow this feature, rxvt must be installed setuid root on -some systems.
+rxvt tries to write an entry into the utmp(5) file so that +it can be seen via the who(1) command, and can accept messages. To +allow this feature, rxvt may need to be installed setuid root +on some systems or setgid to root or to some other group on others.
rxvt sets the environment variables TERM, COLORTERM -and COLORFGBG. The environment variable WINDOWID is set to the X -window id number of the rxvt window and it also uses and -sets the environment variable DISPLAY to specify which display -terminal to use. rxvt uses the environment variables -RXVTPATH and PATH to find XPM files.
--
-rxvt sets and/or uses the following environment variables:
rxvt-unicode
, unless overwritten at configure time, via
+resources or on the commandline.
rxvt
, rxvt-xpm
, depending on wether rxvt was
+compiled with XPM support, and optionally with the added extension
+-mono
to indicate that rxvt-unicode runs on a monochrome screen.
+fg;bg
or fg;xpm;bg
, where fg
is
+the colour code used as default foreground/text colour (or the string
+default
to indicate that the default-colour escape sequence is to be
+used), bg
is the colour code used as default background colour (or the
+string default
), and xpm
is the string default
if rxvt
+was compiled with XPM support. Libraries like ncurses
and slang
can
+(and do) use this information to optimize screen output.
+--with-terminfo=PATH
.
+/bin/sh
.
+rxvtc(1)
and
+rxvtd(1).
+Default $HOME/.rxvt-unicode-<nodename >>>.
+.Xdefaults
)
+
rxvt(7), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
Check the BUGS file for an up-to-date list.
-Cursor change support is not yet implemented.
-Click-and-drag doesn't work with X11 mouse report overriding.
+rxvt(7), rxvtc(1), rxvtd(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
@@ -1434,20 +1903,30 @@
+ +Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
Project Coordinator (Changes 1.0 -)