-
-rxvt-unicode, version 8.2, is a colour vt102 terminal -emulator intended as an xterm(1) replacement for users who do not +emulator intended as an xterm(1) replacement for users who do not require features such as Tektronix 4014 emulation and toolkit-style configurability. As a result, rxvt-unicode uses much less swap space -- a significant advantage on a machine serving many X sessions.
--
-See rxvt(7) (try man 7 rxvt) for a list of
+
+
See rxvt(7) (try man 7 rxvt) for a list of
frequently asked questions and answer to them and some common
problems. That document is also accessible on the World-Wide-Web at
http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html.
-
-Unlike the original rxvt, rxvt-unicode stores all text in Unicode
internally. That means it can store and display most scripts in the
world. Being a terminal emulator, however, some things are very difficult,
@@ -102,23 +99,23 @@
without most of its features to get a lean binary. It also comes with
a client/daemon pair that lets you open any number of terminal windows
from within a single process, which makes startup time very fast and
-drastically reduces memory usage. See rxvtd(1) (daemon) and
-rxvtc(1) (client).
It also makes technical information about escape sequences (which have
-been extended) more accessible: see rxvt(7) for technical
+been extended) more accessible: see rxvt(7) for technical
reference documentation (escape sequences etc.).
-
-The rxvt options (mostly a subset of xterm's) are listed + +
The rxvt options (mostly a subset of xterm's) are listed below. In keeping with the smaller-is-better philosophy, options may be eliminated or default values chosen at compile-time, so options and defaults listed may not accurately reflect the version installed on your system. `rxvt -h' gives a list of major compile-time options on -the Options line. Option descriptions may be prefixed with which -compile option each is dependent upon. e.g. `Compile XIM:' requires -XIM on the Options line. Note: `rxvt -help' gives a list of all +the Options line. Option descriptions may be prefixed with which +compile option each is dependent upon. e.g. `Compile XIM:' requires +XIM on the Options line. Note: `rxvt -help' gives a list of all command-line options compiled into your version.
Note that rxvt permits the resource name to be used as a long-option (--/++ option) so the potential command-line options are @@ -126,1472 +123,1121 @@ Orange'.
The following options are available:
Print out a message describing available options.
-Attempt to open a window on the named X display (-d still +
Print out a message describing available options.
+Attempt to open a window on the named X display (-d still respected). In the absence of this option, the display specified by the DISPLAY environment variable is used.
-Compile xft: Attempt to find a visual with the given bit depth; +
Compile xft: Attempt to find a visual with the given bit depth; resource depth.
-Window geometry (-g still respected); resource geometry.
-Turn on/off simulated reverse video; resource reverseVideo.
-Turn on/off jump scrolling; resource jumpScroll.
-Turn on/off inheriting parent window's pixmap. Alternative form is +
Window geometry (-g still respected); resource geometry.
+Turn on/off simulated reverse video; resource reverseVideo.
+Turn on/off jump scrolling (allow multiple lines per refresh); resource jumpScroll.
+Turn on/off skip scrolling (allow multiple screens per refresh); resource skipScroll.
+Turn on/off inheriting parent window's pixmap. Alternative form is -tr; resource inheritPixmap.
-Please note that transparency of any kind if completely unsupported by
+ Please note that transparency of any kind if completely unsupported by
the author. Don't bug him with installation questions! Read the FAQ (man 7
-rxvt)!
Fade the text by the given percentage when focus is lost. Small values +rxvt)!
+Fade the text by the given percentage when focus is lost. Small values fade a little only, 100 completely replaces all colours by the fade colour; resource fading.
-Fade to this colour when fading is used (see -fade). The default colour +
Fade to this colour when fading is used (see -fade). The default colour is opaque black. resource fadeColor.
-Tint the transparent background pixmap with the given colour when +
Tint the transparent background pixmap with the given colour when transparency is enabled with -tr or -ip. This only works for non-tiled backgrounds, currently. See also the -sh option that can be used to brighten or darken the image in addition to tinting it; resource -tintColor. Example:
-- rxvt -tr -tint blue -sh 40-
number Darken (0 .. 100) or lighten (-1 .. -100) the transparent
-background image in addition to tinting it (i.e. -tint must be
-specified, too, e.g. -tint white); resource shading.
Window background colour; resource background.
-Window foreground colour; resource foreground.
-rxvt -tr -tint blue -sh 40 -
Compile XPM: Specify XPM file for the background and also optionally -specify its scaling with a geometry string. Note you may need to + +
Darken (0 .. 100) or lighten (-1 .. -100) the transparent +background image in addition to (or instead of) tinting it; +resource shading.
+Specify background blending type. If background pixmap is specified +at the same time as transparency - such pixmap will be blended over +transparency image, using method specified. Supported values are : +add, alphablend, allanon - color values averaging, colorize, +darken, diff, dissipate, hue, lighten, overlay, +saturate, screen, sub, tint, value. The default is +alpha-blending; resource blendType.
+Apply Gaussian Blur with the specified radius to the transparent +background image; resource blurRadius.
+Window background colour; resource background.
+Window foreground colour; resource foreground.
+Compile afterimage: Specify image file for the background and also
+optionally specify its scaling with a geometry string. Note you may need to
add quotes to avoid special shell interpretation of the ; in the
-command-line; resource backgroundPixmap.
The cursor colour; resource cursorColor.
-The mouse pointer foreground colour; resource pointerColor.
-The mouse pointer background colour; resource pointerColor2.
-The colour of the border around the text area and between the scrollbar and the text; +command-line; for more details see resource backgroundPixmap.
+The cursor colour; resource cursorColor.
+The mouse pointer foreground colour; resource pointerColor.
+The mouse pointer background colour; resource pointerColor2.
+The colour of the border around the text area and between the scrollbar and the text; resource borderColor.
-Select the fonts to be used. This is a comma separated list of font names +
Select the fonts to be used. This is a comma separated list of font names that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; other fonts might be smaller, but not (in general) larger. A (hopefully) reasonable default font list is always appended to it. See resource font for more details.
-In short, to specify an X11 core font, just specify its name or prefix it +
In short, to specify an X11 core font, just specify its name or prefix it
with x:. To specify an XFT-font, you need to prefix it with xft:,
e.g.:
- rxvt -fn "xft:Bitstream Vera Sans Mono:pixelsize=15" - rxvt -fn "9x15bold,xft:Bitstream Vera Sans Mono"-
See also the question ``How does rxvt-unicode choose fonts?'' in the FAQ -section of rxvt(7).
-rxvt -fn "xft:Bitstream Vera Sans Mono:pixelsize=15" + rxvt -fn "9x15bold,xft:Bitstream Vera Sans Mono" -
Compile font-styles: The bold font list to use when bold characters + +
See also the question "How does rxvt-unicode choose fonts?" in the FAQ +section of rxvt(7).
+Compile font-styles: The bold font list to use when bold characters are to be printed. See resource boldFont for details.
-Compile font-styles: The italic font list to use when italic +
Compile font-styles: The italic font list to use when italic characters are to be printed. See resource italicFont for details.
-Compile font-styles: The bold italic font list to use when bold -italic > characters are to be printed. See resource boldItalicFont +
Compile font-styles: The bold italic font list to use when bold +italic characters are to be printed. See resource boldItalicFont for details.
-Compile font-styles: Bold/Italic font styles imply high intensity +
Compile font-styles: Bold/Italic font styles imply high intensity foreground/background (default). See resource intensityStyles for details.
-Specify the application name under which resources are to be obtained, +
Specify the application name under which resources are to be obtained, rather than the default executable file name. Name should not contain `.' or `*' characters. Also sets the icon and title name.
-Start as a login-shell/sub-shell; resource loginShell.
-Compile utmp: Inhibit/enable writing a utmp entry; resource +
Start as a login-shell/sub-shell; resource loginShell.
+Compile utmp: Inhibit/enable writing a utmp entry; resource utmpInhibit.
-Turn on/off visual bell on receipt of a bell character; resource +
Turn on/off visual bell on receipt of a bell character; resource visualBell.
-Turn on/off scrollbar; resource scrollBar.
-Turn on/off scroll-to-bottom on TTY output inhibit; resource +
Turn on/off scrollbar; resource scrollBar.
+Turn on/off scroll-to-bottom on TTY output inhibit; resource scrollTtyOutput has opposite effect.
-Turn on/off scroll-to-bottom on keypress; resource +
Turn on/off scroll-to-bottom on keypress; resource scrollTtyKeypress.
-Turn on/off scrolling with the scrollback buffer as new lines appear. +
Turn on/off scrolling with the scrollback buffer as new lines appear. This only takes effect if -si is also given; resource scrollWithBuffer.
-Put scrollbar on right/left; resource scrollBar_right.
-Display rxvt (non XTerm/NeXT) scrollbar without/with a trough; +
Put scrollbar on right/left; resource scrollBar_right.
+Display rxvt (non XTerm/NeXT) scrollbar without/with a trough; resource scrollBar_floating.
-If enabled (default), ``Horizontal Tab'' characters are being stored as +
If enabled (default), "Horizontal Tab" characters are being stored as actual wide characters in the screen buffer, which makes it possible to select and paste them. Since a horizontal tab is a cursor movement and not an actual glyph, this can sometimes be visually annoying as the cursor on a tab character is displayed as a wide cursor; resource pastableTabs.
-Blink the cursor; resource cursorBlink.
-Start iconified, if the window manager supports that option. +
Blink the cursor; resource cursorBlink.
+Start iconified, if the window manager supports that option. Alternative form is -ic.
-Save number lines in the scrollback buffer. See resource entry for +
Save number lines in the scrollback buffer. See resource entry for limits; resource saveLines.
-Compile frills: Internal border of number pixels. See resource +
Compile frills: Internal border of number pixels. See resource entry for limits; resource internalBorder.
-Compile frills: External border of number pixels. Also, -bw +
Compile frills: External border of number pixels. Also, -bw and -borderwidth. See resource entry for limits; resource externalBorder.
-Compile frills: Set MWM hints to request a borderless window, i.e. +
Compile frills: Set MWM hints to request a borderless window, i.e. if honoured by the WM, the rxvt-unicode window will not have window decorations; resource borderLess.
-Compile frills: Sets override-redirect on the window; resource +
Compile frills: Sets override-redirect on the window; resource override-redirect.
-Compile frills: Disable the usage of the built-in block graphics/line +
Compile frills: Disable the usage of the built-in block graphics/line drawing characters and just rely on what the specified fonts provide. Use this if you have a good font and want to use its block graphic glyphs; resource skipBuiltinGlyphs.
-Compile frills: Lines (pixel height) to insert between each row of +
Compile frills: Lines (pixel height) to insert between each row of the display. Useful to work around font rendering problems; resource linespace.
-This option specifies the name of the terminal type to be set in the +
This option specifies the name of the terminal type to be set in the TERM environment variable. This terminal type must exist in the -termcap(5) database and should have li# and co# entries; +termcap(5) database and should have li# and co# entries; resource termName.
-Run the command with its command-line arguments in the rxvt +
Run the command with its command-line arguments in the rxvt window; also sets the window title and icon name to be the basename of -the program being executed if neither -title (-T) nor -n are +the program being executed if neither -title (-T) nor -n are given on the command line. If this option is used, it must be the last on the command-line. If there is no -e option then the default is to run the program specified by the SHELL environment variable or, -failing that, sh(1).
-Please note that you must specify a program with arguments. If you want to +failing that, sh(1).
+Please note that you must specify a program with arguments. If you want to run shell commands, you have to specify the shell, like this:
-- rxvt -e sh -c "shell commands"-
rxvt -e sh -c "shell commands" -
Window title (-T still respected); the default title is the basename + +
Window title (-T still respected); the default title is the basename of the program specified after the -e option, if any, otherwise the application name; resource title.
-Icon name; the default name is the basename of the program specified +
Icon name; the default name is the basename of the program specified after the -e option, if any, otherwise the application name; resource iconName.
-Capture system console messages.
-Compile XIM: input style for input method; OverTheSpot, +
Capture system console messages.
+Compile XIM: input style for input method; OverTheSpot, OffTheSpot, Root; resource preeditType.
-Compile XIM: input method name. resource inputMethod.
-The locale to use for opening the IM. You can use an LC_CTYPE of e.g.
+
Compile XIM: input method name. resource inputMethod.
+The locale to use for opening the IM. You can use an LC_CTYPE of e.g.
de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the
input extension to be able to input japanese characters while staying in
another locale. resource imLocale.
Set the font set to use for the X Input Method, see resource imFont +
Set the font set to use for the X Input Method, see resource imFont for more info.
-Change the meaning of triple-click selection with the left mouse -button. Instead of selecting a full line it will extend the selection the +
Change the meaning of triple-click selection with the left mouse +button. Only effective when the original (non-perl) selection code is +in-use. Instead of selecting a full line it will extend the selection the end of the logical line only. resource tripleclickwords.
-Enable ``insecure'' mode, which currently enables most of the escape +
Enable "insecure" mode, which currently enables most of the escape sequences that echo strings. See the resource insecure for more info.
-Override detection of Meta modifier with specified key: alt, +
Override detection of Meta modifier with specified key: alt, meta, hyper, super, mod1, mod2, mod3, mod4, -mod5; resource modifier.
-Turn on/off secondary screen (default enabled); resource +mod5; resource modifier.
+Turn on/off secondary screen (default enabled); resource secondaryScreen.
-Turn on/off secondary screen scroll (default enabled); resource +
Turn on/off secondary screen scroll (default enabled); resource secondaryScroll.
-Turn on/off hold window after exit support. If enabled, rxvt +
Turn on/off hold window after exit support. If enabled, rxvt will not immediately destroy its window when the program executed within it exits. Instead, it will wait till it is being killed or closed by the user; resource hold.
-Remap a key symbol. See resource keysym.
-Tells rxvt to embed its windows into an already-existing window, +
Remap a key symbol. See resource keysym.
+Tells rxvt to embed its windows into an already-existing window, which enables applications to easily embed a terminal.
-Right now, rxvt will first unmap/map the specified window, so it +
Right now, rxvt will first unmap/map the specified window, so it shouldn't be a top-level window. rxvt will also reconfigure it quite a bit, so don't expect it to keep some specific state. It's best to create an extra subwindow for rxvt and leave it alone.
-The window will not be destroyed when rxvt exits.
-It might be useful to know that rxvt will not close file +
The window will not be destroyed when rxvt exits.
+It might be useful to know that rxvt will not close file
descriptors passed to it (except for stdin/out/err, of course), so you
can use file descriptors to communicate with the programs within the
terminal. This works regardless of whether the -embed option was used or
not.
Here is a short Gtk2-perl snippet that illustrates how this option can be -used (a longer example is in doc/embed):
-- my $rxvt = new Gtk2::Socket; +Here is a short Gtk2-perl snippet that illustrates how this option can be +used (a longer example is in doc/embed):
+my $rxvt = new Gtk2::Socket; $rxvt->signal_connect_after (realize => sub { my $xid = $_[0]->window->get_xid; system "rxvt -embed $xid &"; - });-
Tells rxvt NOT to execute any commands or create a new pty/tty + +
Tells rxvt NOT to execute any commands or create a new pty/tty pair but instead use the given file descriptor as the tty master. This is useful if you want to drive rxvt as a generic terminal emulator without having to run a program within it.
-If this switch is given, rxvt will not create any utmp/wtmp +
If this switch is given, rxvt will not create any utmp/wtmp entries and will not tinker with pty/tty permissions - you have to do that yourself if you want that.
-As an extremely special case, specifying -1 will completely suppress
+
As an extremely special case, specifying -1 will completely suppress
pty/tty operations.
Here is a example in perl that illustrates how this option can be used (a -longer example is in doc/pty-fd):
-- use IO::Pty; - use Fcntl;-
+Here is a example in perl that illustrates how this option can be used (a +longer example is in doc/pty-fd):
+use IO::Pty; + use Fcntl; + my $pty = new IO::Pty; fcntl $pty, F_SETFD, 0; # clear close-on-exec system "rxvt -pty-fd " . (fileno $pty) . "&"; - close $pty;-
+ close $pty;
+
# now communicate with rxvt
my $slave = $pty->slave;
- while (<$slave>) { print $slave "got <$_>\n" }
-Comma-separated list of perl extension scripts to use (or not to use) in + +
Comma-separated list of perl extension scripts to use (or not to use) in this terminal instance. See resource perl-ext for details.
--
-Note: `rxvt --help' gives a list of all resources (long options) compiled into your version.
You can set and change the resources using X11 tools like xrdb. Many distribution do also load settings from the ~/.Xresources file when X starts. rxvt will consult the following files/resources in order, with later settings overwriting earlier ones:
-- 1. system-wide app-defaults file, either locale-dependent OR global +1. system-wide app-defaults file, either locale-dependent OR global 2. app-defaults file in $XAPPLRESDIR 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults 4. SCREEN_RESOURCES for the current screen - 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>+ 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename> + +
Note that when reading X resources, rxvt recognizes two class
names: Rxvt and URxvt. The class name Rxvt allows resources
-common to both rxvt and the original rxvt to be easily
+common to both rxvt and the original rxvt to be easily
configured, while the class name URxvt allows resources unique to
rxvt, to be shared between different rxvt
configurations. If no resources are specified, suitable defaults will
be used. Command-line arguments can be used to override resource
settings. The following resources are supported (you might want to
-check the rxvtperl(3) manpage for additional settings by perl
+check the rxvtperl(3) manpage for additional settings by perl
extensions not documented here):
Compile xft: Attempt to find a visual with the given bit depth; +
Compile xft: Attempt to find a visual with the given bit depth; option -depth.
-Create the window with the specified X window geometry [default 80x24]; +
Create the window with the specified X window geometry [default 80x24]; option -geometry.
-Use the specified colour as the window's background colour [default +
Use the specified colour as the window's background colour [default White]; option -bg.
-Use the specified colour as the window's foreground colour [default +
Use the specified colour as the window's foreground colour [default Black]; option -fg.
-Use the specified colour for the colour value n, where 0-7 +
Use the specified colour for the colour value n, where 0-7 corresponds to low-intensity (normal) colours and 8-15 corresponds to high-intensity (bold = bright foreground, blink = bright background) colours. The canonical names are as follows: 0=black, 1=red, 2=green, 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour names used are listed in the COLORS AND GRAPHICS section.
-Colours higher than 15 cannot be set using resources (yet), but can be +
Colours higher than 15 cannot be set using resources (yet), but can be changed using an escape command (see rxvt(7)).
-Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with +
Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with 88 colour support). Colours 80-87 are evenly spaces grey steps.
-Use the specified colour to display bold or italic characters when the +
Use the specified colour to display bold or italic characters when the foreground colour is the default. If font styles are not available -(Compile styles) and this option is unset, reverse video is used instead.
-Use the specified colour to display underlined characters when the +(Compile styles) and this option is unset, reverse video is used instead.
+Use the specified colour to display underlined characters when the foreground colour is the default.
-Use the specified colour as the background for reverse video characters +
Use the specified colour as the background for reverse video characters when OPTION_HC is disabled (--disable-frills).
-If set, use the specified colour as the colour for the underline +
If set, use the specified colour as the colour for the underline itself. If unset, use the foreground colour.
-Use the specified colour for the cursor. The default is to use the +
Use the specified colour for the cursor. The default is to use the foreground colour; option -cr.
-Use the specified colour for the colour of the cursor text. For this to +
Use the specified colour for the colour of the cursor text. For this to take effect, cursorColor must also be specified. The default is to use the background colour.
-True: simulate reverse video by foreground and background colours; +
True: simulate reverse video by foreground and background colours; option -rv. False: regular screen colours [default]; option +rv. See note in COLORS AND GRAPHICS section.
-True: specify that jump scrolling should be used. When scrolling -quickly, fewer screen updates are performed [default]; option -j. -False: specify that smooth scrolling should be used; option +j.
-True: make the background inherit the parent windows' pixmap, giving +
True: specify that jump scrolling should be used. When receiving lots +of lines, rxvt will only scroll once a whole screen height of lines +has been read, resulting in fewer updates while still displaying every +received line; option -j.
+False: specify that smooth scrolling should be used. rxvt will +force a screen refresh on each new line it received; option +j.
+True: (the default) specify that skip scrolling should be used. When +receiving lots of lines, rxvt will only scroll once in a while +(around 60 times per second), resulting in far fewer updates. This can +result in rxvt not ever displaying some of the lines it receives; +option -ss.
+False: specify that everything is to be displayed, even +if the refresh is too fast for the human eye to read anything (or the +monitor to display anything); option +ss.
+True: make the background inherit the parent windows' pixmap, giving artificial transparency. False: do not inherit the parent windows' pixmap.
-Please note that transparency of any kind if completely unsupported by -the author. Don't bug him with installation questions!
-Fade the text by the given percentage when focus is lost; option -fade.
-Fade to this colour, when fading is used (see fading:). The default +
Please note that transparency of any kind if completely unsupported by +the author. Don't bug him with installation questions!
+Fade the text by the given percentage when focus is lost; option -fade.
+Fade to this colour, when fading is used (see fading:). The default colour is black; option -fadecolor.
-Tint the transparent background pixmap with the given colour; option +
Tint the transparent background pixmap with the given colour; option -tint.
-Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image +
Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image in addition to tinting it; option -sh.
-Use the specified colour for the scrollbar [default #B2B2B2].
-Use the specified colour for the scrollbar's trough area [default +
Specify background blending type; option -blt.
+Apply Gaussian Blurr with the specified radius to the transparent +background image; option -blr.
+Use the specified colour for the scrollbar [default #B2B2B2].
+Use the specified colour for the scrollbar's trough area [default #969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar.
-The colour of the border around the text area and between the scrollbar +
The colour of the border around the text area and between the scrollbar and the text.
-Use the specified XPM file (note the `.xpm' extension is optional) for -the background and also optionally specify its scaling with a geometry -string WxH+X+Y, in which ``W'' / ``H'' specify the -horizontal/vertical scale (percent) and ``X'' / ``Y'' locate the image -centre (percent). A scale of 0 displays the image with tiling. A scale -of 1 displays the image without any scaling. A scale of 2 to 9 -specifies an integer number of images in that direction. No image will -be magnified beyond 10 times its original size. The maximum permitted -scale is 1000. [default 0x0+50+50]
-Specify the colon-delimited search path for finding XPM files.
-Select the fonts to be used. This is a comma separated list of font names +
Use the specified image file for the background and also optionally +specify its scaling with a geometry string WxH+X+Y, +in which "W" / "H" specify the horizontal/vertical scale (percent), +and "X" / "Y" locate the image centre (percent). +A scale of 0 displays the image with tiling. A scale of 1 displays the +image without any scaling. A scale of 2 to 9 specifies an integer +number of images in that direction. No image will be magnified beyond +10 times its original size. The maximum permitted scale is 1000. +Special string of "auto" used as a geometry will cause image to be +automatically scaled to match window size. +If used in conjunction with -tr option - specified pixmap will be +blended over transparency image using either alpha-blending, or any +other blending type, specified with -blt "type" option. +[default 0x0+50+50]
+Specify the colon-delimited search path for finding XPM files.
+Select the fonts to be used. This is a comma separated list of font names that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; other fonts might be smaller, but not (in general) larger. A (hopefully) reasonable default font list is always appended to it; option -fn.
-Each font can either be a standard X11 core font (XLFD) name, with
-optional prefix x: or a Xft font (Compile xft), prefixed with xft:.
In addition, each font can be prefixed with additional hints and +
Each font can either be a standard X11 core font (XLFD) name, with
+optional prefix x: or a Xft font (Compile xft), prefixed with xft:.
In addition, each font can be prefixed with additional hints and
specifications enclosed in square brackets ([]). The only available
hint currently is codeset=codeset-name, and this is only used for Xft
fonts.
For example, this font resource
-- URxvt.font: 9x15bold,\ +For example, this font resource
+URxvt.font: 9x15bold,\ -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\ -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \ [codeset=JISX0208]xft:Kochi Gothic:antialias=false, \ - xft:Code2000:antialias=false-
specifies five fonts to be used. The first one is 9x15bold (actually
+ xft:Code2000:antialias=false
+
+
+
specifies five fonts to be used. The first one is 9x15bold (actually
the iso8859-1 version of the second font), which is the base font (because
it is named first) and thus defines the character cell grid to be 9 pixels
wide and 15 pixels high.
The second font is just used to add additional unicode characters not in +
The second font is just used to add additional unicode characters not in the base font, likewise the third, which is unfortunately non-bold, but the bold version of the font does contain less characters, so this is a useful supplement.
-The third font is an Xft font with aliasing turned off, and the characters +
The third font is an Xft font with aliasing turned off, and the characters are limited to the JIS 0208 codeset (i.e. japanese kanji). The font contains other characters, but we are not interested in them.
-The last font is a useful catch-all font that supplies most of the +
The last font is a useful catch-all font that supplies most of the remaining unicode characters.
-The font list to use for displaying bold, italic or bold -italic > characters, respectively.
-If specified and non-empty, then the syntax is the same as for the +
The font list to use for displaying bold, italic or bold +italic characters, respectively.
+If specified and non-empty, then the syntax is the same as for the font-resource, and the given font list will be used as is, which makes it possible to substitute completely different font styles for bold and italic.
-If unset (the default), a suitable font list will be synthesized by -``morphing'' the normal text font list into the desired shape. If that is +
If unset (the default), a suitable font list will be synthesized by +"morphing" the normal text font list into the desired shape. If that is not possible, replacement fonts of the desired shape will be tried.
-If set, but empty, then this specific style is disabled and the normal +
If set, but empty, then this specific style is disabled and the normal text font will being used for the given style.
-When font styles are not enabled, or this option is enabled (True, +
When font styles are not enabled, or this option is enabled (True, option -is, the default), bold and italic font styles imply high intensity foreground/background colours. Disabling this option (False, option +is) disables this behaviour, the high intensity colours are not reachable.
-Set mouse selection style to old which is 2.20, oldword which is -xterm style with 2.20 old word selection, or anything else which gives -xterm style selection.
-Set scrollbar style to rxvt, plain, next or xterm. plain is +
Set mouse selection style to old which is 2.20, oldword which +is xterm style with 2.20 old word selection, or anything else which +gives xterm style selection. Only effective when the original (non-perl) +selection code is in use.
+Set scrollbar style to rxvt, plain, next or xterm. plain is the author's favourite.
-Set window title string, the default title is the command-line +
Set window title string, the default title is the command-line specified after the -e option, if any, otherwise the application name; option -title.
-Set the name used to label the window's icon or displayed in an icon +
Set the name used to label the window's icon or displayed in an icon manager window, it also sets the window's title unless it is explicitly set; option -n.
-True: de-iconify (map) on receipt of a bell character. False: no +
True: de-iconify (map) on receipt of a bell character. False: no de-iconify (map) on receipt of a bell character [default].
-True: use visual bell on receipt of a bell character; option -vb. +
True: set the urgency hint for the wm on receipt of a bell character. +False: do not set the urgency hint [default].
+True: use visual bell on receipt of a bell character; option -vb. False: no visual bell [default]; option +vb.
-True: start as a login shell by prepending a `-' to argv[0] of +
True: start as a login shell by prepending a `-' to argv[0] of the shell; option -ls. False: start as a normal sub-shell [default]; option +ls.
-True: inhibit writing record into the system log file utmp; +
True: inhibit writing record into the system log file utmp; option -ut. False: write record into the system log file utmp [default]; option +ut.
-Specify a command pipe for vt100 printer [default lpr(1)]. Use +
Specify a command pipe for vt100 printer [default lpr(1)]. Use Print to initiate a screen dump to the printer and Ctrl-Print or Shift-Print to include the scrollback as well.
-The string will be interpreted as if typed into the shell as-is.
-Example:
-- URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)-
This creates a new file in your home directory with the screen contents
-every time you hit Print.
The string will be interpreted as if typed into the shell as-is.
+Example:
+URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX) -
True: enable the scrollbar [default]; option -sb. False: + +
This creates a new file in your home directory with the screen contents
+every time you hit Print.
True: enable the scrollbar [default]; option -sb. False: disable the scrollbar; option +sb.
-True: place the scrollbar on the right of the window; option -sr. +
True: place the scrollbar on the right of the window; option -sr. False: place the scrollbar on the left of the window; option +sr.
-True: display an rxvt scrollbar without a trough; option -st. +
True: display an rxvt scrollbar without a trough; option -st. False: display an rxvt scrollbar with a trough; option +st.
-Align the top, bottom or centre [default] of the scrollbar +
Align the top, bottom or centre [default] of the scrollbar thumb with the pointer on middle button press/drag.
-True: scroll to bottom when tty receives output; option -si. +
True: scroll to bottom when tty receives output; option -si. False: do not scroll to bottom when tty receives output; option +si.
-True: scroll with scrollback buffer when tty receives new lines (and +
True: scroll with scrollback buffer when tty receives new lines (and scrollTtyOutput is False); option -sw. False: do not scroll with scrollback buffer when tty receives new lines; option +sw.
-True: scroll to bottom when a non-special key is pressed. Special keys +
True: scroll to bottom when a non-special key is pressed. Special keys are those which are intercepted by rxvt-unicode for special handling and are not passed onto the shell; option -sk. False: do not scroll to bottom when a non-special key is pressed; option +sk.
-Save number lines in the scrollback buffer [default 64]. This +
Save number lines in the scrollback buffer [default 64]. This resource is limited on most machines to 65535; option -sl.
-Internal border of number pixels. This resource is limited to 100; +
Internal border of number pixels. This resource is limited to 100; option -b.
-External border of number pixels. This resource is limited to 100; +
External border of number pixels. This resource is limited to 100; option -w, -bw, -borderwidth.
-Set MWM hints to request a borderless window, i.e. if honoured by the +
Set MWM hints to request a borderless window, i.e. if honoured by the WM, the rxvt-unicode window will not have window decorations; option -bl.
-Compile frills: Disable the usage of the built-in block graphics/line +
Compile frills: Disable the usage of the built-in block graphics/line drawing characters and just rely on what the specified fonts provide. Use this if you have a good font and want to use its block graphic glyphs; option -sbg.
-Specifies the terminal type name to be set in the TERM environment +
Specifies the terminal type name to be set in the TERM environment variable; option -tn.
-Specifies number of lines (pixel height) to insert between each row of +
Specifies number of lines (pixel height) to insert between each row of the display [default 0]; option -lsp.
-True: handle Meta (Alt) + keypress to set the 8th bit. False: +
True: handle Meta (Alt) + keypress to set the 8th bit. False: handle Meta (Alt) + keypress as an escape prefix [default].
-True: the mouse wheel scrolls a page full. False: the mouse wheel +
True: the mouse wheel scrolls a page full. False: the mouse wheel scrolls five lines [default].
-True: store tabs as wide characters. False: interpret tabs as cursor +
True: store tabs as wide characters. False: interpret tabs as cursor
movement only; option -ptab.
True: blink the cursor. False: do not blink the cursor [default]; +
True: blink the cursor. False: do not blink the cursor [default]; option -bc.
-True: blank the pointer when a key is pressed or after a set number +
True: blank the pointer when a key is pressed or after a set number of seconds of inactivity. False: the pointer is always visible [default].
-Mouse pointer foreground colour.
-Mouse pointer background colour.
-Specifies number of seconds before blanking the pointer [default 2]. Use a +
Mouse pointer foreground colour.
+Mouse pointer background colour.
+Specifies number of seconds before blanking the pointer [default 2]. Use a
large number (e.g. 987654321) to effectively disable the timeout.
The string to send when the backspace key is pressed. If set to DEC +
The string to send when the backspace key is pressed. If set to DEC or unset it will send Delete (code 127) or, if shifted, Backspace (code 8) - which can be reversed with the appropriate DEC private mode escape sequence.
-The string to send when the delete key (not the keypad delete key) is +
The string to send when the delete key (not the keypad delete key) is pressed. If unset it will send the sequence traditionally associated with the Execute key.
-The characters used as delimiters for double-click word selection +
The characters used as delimiters for double-click word selection (whitespace delimiting is added automatically if resource is given).
-When the selection extension is in use (the default if compiled in, see
-the rxvtperl(3) manpage), a suitable regex using these characters
-will be created (if the resource exists, otherwise, no regex will be
-created). In this mode, characters outside ISO-8859-1 can be used.
When the selection extension is not used, only ISO-8859-1 characters can +
When the perl selection extension is in use (the default if compiled +in, see the rxvtperl(3) manpage), a suitable regex using these +characters will be created (if the resource exists, otherwise, no regex +will be created). In this mode, characters outside ISO-8859-1 can be used.
+When the selection extension is not used, only ISO-8859-1 characters can be used. If not specified, the built-in default is used:
-BACKSLASH ```'&()*,;<=?@[]{|} >>
-OverTheSpot, OffTheSpot, Root; option -pt.
-name of inputMethod to use; option -im.
-The locale to use for opening the IM. You can use an LC_CTYPE of e.g.
+
BACKSLASH `"'&()*,;<=>?@[]{|}
+OverTheSpot, OffTheSpot, Root; option -pt.
+name of inputMethod to use; option -im.
+The locale to use for opening the IM. You can use an LC_CTYPE of e.g.
de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the
input extension to be able to input japanese characters while staying in
another locale; option -imlocale.
Specify the font-set used for XIM styles OverTheSpot or
+
Specify the font-set used for XIM styles OverTheSpot or
OffTheSpot. It must be a standard X font set (XLFD patterns separated
by commas), i.e. it's not in the same format as the other font lists used
in rxvt. The default will be set-up to chose *any* suitable found
found, preferably one or two pixels differing in size to the base font.
option -imfont.
Change the meaning of triple-click selection with the left mouse +
Change the meaning of triple-click selection with the left mouse button. Instead of selecting a full line it will extend the selection to the end of the logical line only; option -tcw.
-Enables ``insecure'' mode. Rxvt-unicode offers some escape sequences that +
Enables "insecure" mode. Rxvt-unicode offers some escape sequences that
echo arbitrary strings like the icon name or the locale. This could be
abused if somebody gets 8-bit-clean access to your display, whether
through a mail client displaying mail bodies unfiltered or through
-write(1) or any other means. Therefore, these sequences are disabled by
+write(1) or any other means. Therefore, these sequences are disabled by
default. (Note that many other terminals, including xterm, have these
sequences enabled by default, which doesn't make it safer, though).
You can enable them by setting this boolean resource or specifying +
You can enable them by setting this boolean resource or specifying -insecure as an option. At the moment, this enables display-answer, locale, findfont, icon label and window title requests.
-Set the key to be interpreted as the Meta key to: alt, meta, +
Set the key to be interpreted as the Meta key to: alt, meta, hyper, super, mod1, mod2, mod3, mod4, mod5; option -mod.
-Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E) +
Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E) character is passed through. It may contain escape values as described in the entry on keysym following.
-Turn on/off secondary screen (default enabled).
-Turn on/off secondary screen scroll (default enabled). If the this +
Turn on/off secondary screen (default enabled).
+Turn on/off secondary screen scroll (default enabled). If this option is enabled, scrolls on the secondary screen will change the scrollback buffer and switching to/from the secondary screen will instead scroll the screen up.
-Turn on/off hold window after exit support. If enabled, rxvt +
Turn on/off hold window after exit support. If enabled, rxvt will not immediately destroy its window when the program executed within it exits. Instead, it will wait till it is being killed or closed by the user.
-Compile frills: Associate string with keysym sym. The +
Compile frills: Associate string with keysym sym. The intervening resource name keysym. cannot be omitted.
-The format of sym is ``(modifiers-)key'', where modifiers can be +
The format of sym is "(modifiers-)key", where modifiers can be any combination of ISOLevel3, AppKeypad, Control, NumLock, Shift, Meta, Lock, Mod1, Mod2, Mod3, Mod4, Mod5, and the abbreviated I, K, C, N, S, M, A, L, 1, 2, 3, 4, 5.
-The NumLock, Meta and ISOLevel3 modifiers are usually aliased to +
The NumLock, Meta and ISOLevel3 modifiers are usually aliased to whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr keys are being mapped. AppKeypad is a synthetic modifier mapped to the current application keymap mode state.
-The spellings of key can be obtained by using xev(1) command or +
The spellings of key can be obtained by using xev(1) command or searching keysym macros from /usr/X11R6/include/X11/keysymdef.h and -omitting the prefix XK_. Alternatively you can specify key by its hex -keysym value (0x0000 - 0xFFFF). Note that the lookup of syms is not +omitting the prefix XK_. Alternatively you can specify key by its hex +keysym value (0x0000 - 0xFFFF). Note that the lookup of syms is not performed in an exact manner; however, the closest match is assured.
-string may contain escape values (\a: bell, \b: backspace,
+
string may contain escape values (\a: bell, \b: backspace,
\e, \E: escape, \n: newline, \r: carriage return, \t: tab,
\000: octal number) or verbatim control characters (^?: delete,
^@: null, ^A ...) and may be enclosed with double quotes so that it
can start or end with whitespace. This feature is deprecated and will
be removed.
Please note that you need to double the \ in resource files, as
+
Please note that you need to double the \ in resource files, as
Xlib itself does its own de-escaping (you can use \033 instead of
\e (and so on), which will work with both Xt and rxvt's own
processing).
You can define a range of keysyms in one shot by providing a string +
You can define a range of keysyms in one shot by providing a string with pattern list/PREFIX/MIDDLE/SUFFIX, where the delimiter `/' should be a character not used by the strings.
-Its usage can be demonstrated by an example:
-- URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|>-
The above line is equivalent to the following three lines:
-- URxvt.keysym.Meta-Control-0x61: \033<M-C-a> +Its usage can be demonstrated by an example:
+URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|> + ++The above line is equivalent to the following three lines:
+URxvt.keysym.Meta-Control-0x61: \033<M-C-a> URxvt.keysym.Meta-Control-0x62: \033<M-C-b> - URxvt.keysym.Meta-Control-0x63: \033<M-C-c>-
If string takes the form of command:STRING, the specified STRING
+ URxvt.keysym.Meta-Control-0x63: \033<M-C-c>
+
+
+
If string takes the form of command:STRING, the specified STRING
is interpreted and executed as rxvt's control sequence. For
-example the following means ``change the current locale to zh_CN.GBK
-when Control-Meta-c is being pressed'':
- URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007-
If string takes the form perl:STRING, then the specified STRING
-is passed to the on_keyboard_command perl handler. See the rxvtperl(3)
-manpage. For example, the selection extension (activated via
+example the following means "change the current locale to zh_CN.GBK
+when Control-Meta-c is being pressed":
URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 + ++
If string takes the form perl:STRING, then the specified STRING
+is passed to the on_keyboard_command perl handler. See the rxvtperl(3)
+manpage. For example, the selection extension (activated via
rxvt -pe selection) listens for selection:rot13 events:
- URxvt.keysym.M-C-c: perl:selection:rot13-
Due the the large number of modifier combinations, a defined key mapping -will match if at at least the specified identifiers are being set, and +
URxvt.keysym.M-C-c: perl:selection:rot13 + ++
Due the the large number of modifier combinations, a defined key mapping
+will match if at at least the specified identifiers are being set, and
no other key mappings with those and more bits are being defined. That
means that defining a key map for a will automatically provide
definitions for Meta-a, Shift-a and so on, unless some of those are defined
mappings themselves.
Unfortunately, this will override built-in key mappings. For example +
Unfortunately, this will override built-in key mappings. For example
if you overwrite the Insert key you will disable rxvt's
-Shift-Insert mapping. To re-enable that, you can poke ``holes'' into the
+Shift-Insert mapping. To re-enable that, you can poke "holes" into the
user-defined keymap using the builtin: replacement:
- URxvt.keysym.Insert: <my insert key sequence> - URxvt.keysym.S-Insert: builtin:-
The first line defines a mapping for Insert and any combination
+
URxvt.keysym.Insert: <my insert key sequence> + URxvt.keysym.S-Insert: builtin: + ++
The first line defines a mapping for Insert and any combination
of modifiers. The second line re-establishes the default mapping for
Shift-Insert.
The following example will map Control-Meta-1 and Control-Meta-2 to +
The following example will map Control-Meta-1 and Control-Meta-2 to
the fonts suxuseuro and 9x15bold, so you can have some limited
font-switching at runtime:
- URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 - URxvt.keysym.M-C-2: command:\033]50;9x15bold\007-
Other things are possible, e.g. resizing (see rxvt(7) for more
-info):
- URxvt.keysym.M-C-3: command:\033[8;25;80t - URxvt.keysym.M-C-4: command:\033[8;48;110t-
URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 -
Other things are possible, e.g. resizing (see rxvt(7) for more +info):
+URxvt.keysym.M-C-3: command:\033[8;25;80t + URxvt.keysym.M-C-4: command:\033[8;48;110t -
Comma-separated list(s) of perl extension scripts (default: default) to
+
+
Comma-separated list(s) of perl extension scripts (default: default) to
use in this terminal instance; option -pe.
Extension names can be prefixed with a - sign to prohibit using
+
Extension names can be prefixed with a - sign to prohibit using
them. This can be useful to selectively disable some extensions loaded
by default, or specified via the perl-ext-common resource. For
example, default,-selection will use all the default extension except
selection.
Extension names can also be followed by an argument in angle brackets +
Extension names can also be followed by an argument in angle brackets
(e.g. searchable-scrollback<M-s>, which binds the hotkey for
searchable scrollback to Alt/Meta-s). Mentioning the same extension
multiple times with different arguments will pass multiple arguments to
the extension.
Each extension is looked up in the library directories, loaded if +
Each extension is looked up in the library directories, loaded if necessary, and bound to the current terminal instance.
-If both of these resources are the empty string, then the perl +
If both of these resources are the empty string, then the perl interpreter will not be initialized. The idea behind two options is that perl-ext-common will be used for extensions that should be available to all instances, while perl-ext is used for specific instances.
-Perl code to be evaluated when all extensions have been registered. See
-the rxvtperl(3) manpage. Due to security reasons, this resource
+
Perl code to be evaluated when all extensions have been registered. See +the rxvtperl(3) manpage. Due to security reasons, this resource will be ignored when running setuid/setgid.
-Colon-separated list of additional directories that hold extension +
Colon-separated list of additional directories that hold extension
scripts. When looking for extensions specified by the perl resource,
rxvt will first look in these directories and then in
-/opt/rxvt/lib/urxvt/perl/. Due to security reasons, this resource
+/opt/rxvt/lib/urxvt/perl/. Due to security reasons, this resource
will be ignored when running setuid/setgid.
See the rxvtperl(3) manpage.
Additional selection patterns, see the rxvtperl(3) manpage for
+
See the rxvtperl(3) manpage.
+Additional selection patterns, see the rxvtperl(3) manpage for details.
-Selection auto-transform patterns, see the rxvtperl(3) manpage
+
Selection auto-transform patterns, see the rxvtperl(3) manpage for details.
-Sets the hotkey that starts the incremental scrollback buffer search +
Sets the hotkey that starts the incremental scrollback buffer search
(default: M-s).
Specifies the program to be started with a URL argument. Used by the +
Specifies the program to be started with a URL argument. Used by the
selection-popup and matcher perl extensions.
Compile frills: Sets the WM_TRANSIENT_FOR property to the given window id.
-Compile frills: Sets override-redirect for the terminal window, making +
Compile frills: Sets the WM_TRANSIENT_FOR property to the given window id.
+Compile frills: Sets override-redirect for the terminal window, making it almost invisible to window managers; option -override-redirect.
-Turn on/off ISO 14755 5.2 mode (default enabled).
+-
-Lines of text that scroll off the top of the rxvt window (resource: saveLines) and can be scrolled back using the scrollbar or by keystrokes. The normal rxvt scrollbar has arrows and its behaviour is fairly intuitive. The xterm-scrollbar is without -arrows and its behaviour mimics that of xterm
+arrows and its behaviour mimics that of xtermScroll down with Button1 (xterm-scrollbar) or Shift-Next. Scroll up with Button3 (xterm-scrollbar) or Shift-Prior. Continuous scroll with Button2.
--
-To temporarily override mouse reporting, for either the scrollbar or the normal text selection/insertion, hold either the Shift or the Meta (Alt) key while performing the desired mouse action.
@@ -1601,177 +1247,151 @@ (Next) and ESC [ 5 ~ (Prior), respectively. Similarly, clicking on the up and down arrows sends ESC [ A (Up) and ESC [ B (Down), respectively. --
-The behaviour of text selection and insertion mechanism is similar to -xterm(1).
-Left click at the beginning of the region, drag to the end of the region +
The behaviour of text selection and insertion/pasting mechanism is similar +to xterm(1).
+Left click at the beginning of the region, drag to the end of the region and release; Right click to extend the marked region; Left double-click to select a word; Left triple-click to select the entire logical line (which can span multiple screen lines), unless modified by resource tripleclickwords.
-Starting a selection while pressing the Meta key (or Meta+Ctrl keys) -(Compile: frills) will create a rectangular selection instead of a +
Starting a selection while pressing the Meta key (or Meta+Ctrl keys) +(Compile: frills) will create a rectangular selection instead of a normal one. In this mode, every selected row becomes its own line in the selection, and trailing whitespace is visually underlined and removed from the selection.
-Pressing and releasing the Middle mouse button in an rxvt +
Pressing and releasing the Middle mouse button in an rxvt window causes the value of the PRIMARY selection (or CLIPBOARD with the -Meta modifier) to be inserted as if it had been typed on the keyboard.
-Pressing Shift-Insert causes the value of the PRIMARY selection to be +Meta modifier) to be inserted as if it had been typed on the keyboard.
+Pressing Shift-Insert causes the value of the PRIMARY selection to be inserted too.
--
-Changing fonts (or font sizes, respectively) via the keypad is not yet supported in rxvt-unicode. Bug me if you need this.
You can, however, switch fonts at runtime using escape sequences, e.g.:
-- printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"+
printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic" + +
You can use keyboard shortcuts, too:
-- URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 - URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007+
URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007 + +
rxvt-unicode will automatically re-apply these fonts to the output so far.
--
-ISO 14755 is a standard for entering and viewing unicode characters
and character codes using the keyboard. It consists of 4 parts. The
first part is available rxvt-unicode has been compiled with
--enable-frills, the rest is available when rxvt-unicode was compiled
with --enable-iso14755.
This allows you to enter unicode characters using their hexcode.
-Start by pressing and holding both Control and Shift, then enter
+
This allows you to enter unicode characters using their hexcode.
+Start by pressing and holding both Control and Shift, then enter
hex-digits (between one and six). Releasing Control and Shift will
commit the character as if it were typed directly. While holding down
Control and Shift you can also enter multiple characters by pressing
Space, which will commit the current character and lets you start a new
one.
As an example of use, imagine a business card with a japanese e-mail +
As an example of use, imagine a business card with a japanese e-mail
address, which you cannot type. Fortunately, the card has the e-mail
address printed as hexcodes, e.g. 671d 65e5. You can enter this easily
by pressing Control and Shift, followed by 6-7-1-D-SPACE-6-5-E-5,
followed by releasing the modifier keys.
This mode lets you input characters representing the keycap symbols of + +
This mode lets you input characters representing the keycap symbols of your keyboard, if representable in the current locale encoding.
-Start by pressing Control and Shift together, then releasing
+
Start by pressing Control and Shift together, then releasing
them. The next special key (cursor keys, home etc.) you enter will not
invoke its usual function but instead will insert the corresponding
keycap symbol. The symbol will only be entered when the key has been
released, otherwise pressing e.g. Shift would enter the symbol for
ISO Level 2 Switch, although your intention might have been to enter a
reverse tab (Shift-Tab).
While this is implemented already (it's basically the selection + +
While this is implemented already (it's basically the selection mechanism), it could be extended by displaying a unicode character map.
-This method lets you display the unicode character code associated with + +
This method lets you display the unicode character code associated with characters already displayed.
-You enter this mode by holding down Control and Shift together, then
+
You enter this mode by holding down Control and Shift together, then
pressing and holding the left mouse button and moving around. The unicode
-hex code(s) (it might be a combining character) of the character under the
+hex code(s) (it might be a combining character) of the character under the
pointer is displayed until you release Control and Shift.
In addition to the hex codes it will display the font used to draw this +
In addition to the hex codes it will display the font used to draw this character - due to implementation reasons, characters combined with combining characters, line drawing characters and unknown characters will always be drawn using the built-in support font.
-With respect to conformance, rxvt-unicode is supposed to be compliant to both scenario A and B of ISO 14755, including part 5.2.
--
-rxvt tries to write an entry into the utmp(5) file so that -it can be seen via the who(1) command, and can accept messages. To + +
rxvt tries to write an entry into the utmp(5) file so that +it can be seen via the who(1) command, and can accept messages. To allow this feature, rxvt may need to be installed setuid root on some systems or setgid to root or to some other group on others.
--
-In addition to the default foreground and background colours, rxvt can display up to 16 colours (8 ANSI colours plus high-intensity bold/blink versions of the same). Here is a list of the colours with their names.
-| color0 | (black) | = Black |
| color1 | (red) | = Red3 |
| color2 | (green) | = Green3 |
| color3 | (yellow) | = Yellow3 |
| color4 | (blue) | = Blue3 |
| color5 | (magenta) | = Magenta3 |
| color6 | (cyan) | = Cyan3 |
| color7 | (white) | = AntiqueWhite |
| color8 | (bright black) | = Grey25 |
| color9 | (bright red) | = Red |
| color10 | (bright green) | = Green |
| color11 | (bright yellow) | = Yellow |
| color12 | (bright blue) | = Blue |
| color13 | (bright magenta) | = Magenta |
| color14 | (bright cyan) | = Cyan |
| color15 | (bright white) | = White |
| foreground | = Black | |
| background | = White |
It is also possible to specify the colour values of foreground, +
| color0 | (black) | = Black |
| color1 | (red) | = Red3 |
| color2 | (green) | = Green3 |
| color3 | (yellow) | = Yellow3 |
| color4 | (blue) | = Blue3 |
| color5 | (magenta) | = Magenta3 |
| color6 | (cyan) | = Cyan3 |
| color7 | (white) | = AntiqueWhite |
| color8 | (bright black) | = Grey25 |
| color9 | (bright red) | = Red |
| color10 | (bright green) | = Green |
| color11 | (bright yellow) | = Yellow |
| color12 | (bright blue) | = Blue |
| color13 | (bright magenta) | = Magenta |
| color14 | (bright cyan) | = Cyan |
| color15 | (bright white) | = White |
| foreground | = Black | |
| background | = White |
It is also possible to specify the colour values of foreground, background, cursorColor, cursorColor2, colorBD, colorUL as a number 0-15, as a convenient shorthand to reference the colour name of color0-color15.
In addition to the colours defined above, rxvt offers an additional 72 colours. The first 64 of those (with indices 16 to 79) -consist of a 4*4*4 RGB colour cube (i.e. index = r * 16 + g * 4 + b + -16), followed by 8 additional shades of gray (with indices 80 to 87).
+consist of a 4*4*4 RGB colour cube (i.e. index = r * 16 + g * 4 + b + +16), followed by 8 additional shades of gray (with indices 80 to 87).Together, all those colours implement the 88 colour xterm colours. Only the first 16 can be changed using resources currently, the rest can only -be changed via command sequences (``escape codes'').
-Note that -rv (``reverseVideo: True'') simulates reverse video by +be changed via command sequences ("escape codes").
+Note that -rv ("reverseVideo: True") simulates reverse video by always swapping the foreground/background colours. This is in contrast to -xterm(1) where the colours are only swapped if they have not otherwise +xterm(1) where the colours are only swapped if they have not otherwise been specified. For example,
would yield White on Black, while on xterm(1) it would yield Black +
would yield White on Black, while on xterm(1) it would yield Black on White.
--
-If Xft support has been compiled in and as long as Xft/Xrender/X don't get
their act together, rxvt-unicode will support rgba:rrrr/gggg/bbbb/aaaa
(recommended, but MUST have 4 digits/component) colour specifications,
@@ -1781,208 +1401,154 @@
percent is a decimal percentage (0-100) that specifies the opacity of
the color, where 0 is completely transparent and 100 is completelxy
opaque.
You probably need to specify ``-depth 32'', too, and have the luck that +
You probably need to specify "-depth 32", too, and have the luck that your X-server uses ARGB pixel layout, as X is far from just supporting ARGB visuals out of the box, and rxvt-unicode just fudges around.
For example, the following selects an almost completely transparent red background, and an almost opaque pink foreground:
-- rxvt -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"-
Please note that transparency of any kind if completely unsupported by -the author. Don't bug him with installation questions!
--
-rxvt -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink" + ++
Please note that transparency of any kind if completely unsupported by +the author. Don't bug him with installation questions!
+ +rxvt sets and/or uses the following environment variables:
Normally set to rxvt-unicode, unless overwritten at configure time, via
+
Normally set to rxvt-unicode, unless overwritten at configure time, via
resources or on the command line.
Either rxvt, rxvt-xpm, depending on whether rxvt was
+
Either rxvt, rxvt-xpm, depending on whether rxvt was
compiled with XPM support, and optionally with the added extension
-mono to indicate that rxvt-unicode runs on a monochrome screen.
Set to a string of the form fg;bg or fg;xpm;bg, where fg is
+
Set to a string of the form fg;bg or fg;xpm;bg, where fg is
the colour code used as default foreground/text colour (or the string
default to indicate that the default-colour escape sequence is to be
used), bg is the colour code used as default background colour (or the
string default), and xpm is the string default if rxvt
was compiled with XPM support. Libraries like ncurses and slang can
(and do) use this information to optimize screen output.
Set to the (decimal) X Window ID of the rxvt window (the toplevel +
Set to the (decimal) X Window ID of the rxvt window (the toplevel window, which usually has subwindows for the scrollbar, the terminal window and so on).
-Set to the terminfo directory iff rxvt was configured with +
Set to the terminfo directory iff rxvt was configured with
--with-terminfo=PATH.
Used by rxvt to connect to the display and set to the correct +
Used by rxvt to connect to the display and set to the correct display in its child processes.
-The shell to be used for command execution, defaults to /bin/sh.
The unix domain socket path used by rxvtc(1) and
+
The shell to be used for command execution, defaults to /bin/sh.
The unix domain socket path used by rxvtc(1) and rxvtd(1).
-Default $HOME/.rxvt-unicode-<nodename >>>.
-Used to locate the default directory for the unix domain socket for +
Default $HOME/.rxvt-unicode-<nodename.
+Used to locate the default directory for the unix domain socket for
daemon communications and to locate various resource files (such as
.Xdefaults)
Directory where various X resource files are being located.
-If set and accessible, gives the name of a X resource file to be loaded by +
Directory where various X resource files are being located.
+If set and accessible, gives the name of a X resource file to be loaded by rxvt.
--
-Color names.
--
-rxvt(7), rxvtc(1), rxvtd(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
-
-Color names.
+-
-University of Kent, 1992, wrote the original Xvt.
-very heavily modified Xvt and came up with Rxvt
-wrote the Greek Keyboard Input (no longer in code)
-Wrote the menu system.
-Project Coordinator (changes.txt 2.11 to 2.21)
-Project Coordinator (changes.txt 2.21a to 2.4.5)
-Rewrote screen display and text selection routines. -
-- -Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)-
rxvt(7), rxvtc(1), rxvtd(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
+ +Marc A. Lehmann <rxvt-unicode@schmorp.de>
+ +Forked rxvt-unicode, unicode support, rewrote almost all the code, perl +
University of Kent, 1992, wrote the original Xvt.
+very heavily modified Xvt and came up with Rxvt
+wrote the Greek Keyboard Input (no longer in code)
+Wrote the menu system.
+Project Coordinator (changes.txt 2.11 to 2.21)
+Project Coordinator (changes.txt 2.21a to 2.4.5)
+Rewrote screen display and text selection routines.
+Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
+Forked rxvt-unicode, unicode support, rewrote almost all the code, perl extension, random hacks, numerous bugfixes and extensions.
-Project Coordinator (Changes 1.0 -)
-Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.
-Project Coordinator (Changes 1.0 -)
+ +Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.
+