[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs.
Revision 1.243 by root, Sat May 30 21:02:05 2015 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
321		275
322	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
323		277
324	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
325		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
326	=item B<-iconic>	284	=item B<-iconic>
327		285
328	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
329	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
330		288
…		…
354	=item B<-override-redirect>	312	=item B<-override-redirect>
355		313
356	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
357	B<override-redirect>.	315	B<override-redirect>.
358		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
		321
359	=item B<-sbg>	322	=item B<-sbg>
360		323
361	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
362	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
363	this if you have a good font and want to use its block graphic glyphs;	326	this if you have a good font and want to use its block graphic glyphs;
…		…
366	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
367		330
368	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
369	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
370	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
371		341
372	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
373		343
374	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
375	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
410	=item B<-pt> I<style>	380	=item B<-pt> I<style>
411		381
412	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
413	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
414		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
415	=item B<-im> I<text>	388	=item B<-im> I<text>
416		389
417	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
418		391
419	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
560	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
561	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
562	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
563	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
564		537
565	1. system-wide app-defaults file, either locale-dependent OR global
566	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
567	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
568	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
569	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
570	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
571		544
572	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
573	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
614	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
615	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
616	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
617	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
618	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
619	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
620		593
621	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
622	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
623		596
624	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
635	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
636		609
637	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
638	foreground colour is the default.	611	foreground colour is the default.
639		612
640	=item B<colorRV:> I<colour>
641
642	Use the specified colour as the background for reverse video characters
643	when OPTION_HC is disabled (--disable-frills).
644
645	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
646		614
647	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
648	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
649		627
650	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
651		629
652	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
653	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
660		638
661	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
662		640
663	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
664	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
665	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
666		644
667	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
668		646
669	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
670	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
684		662
685	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
686	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
687	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
688		666
689	=item B<transparent:> I<boolean>
690
691	Turn on/off illusion of a transparent window background.
692
693	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
694	future versions.
695
696	I<Please address all transparency related issues to Sasha Vasko at
697	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
698
699	=item B<fading:> I<number>	667	=item B<fading:> I<number>
700		668
701	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
702		670
703	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
704		672
705	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
706	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
707		675
708	=item B<tintColor:> I<colour>
709
710	Tint the transparent background pixmap with the given colour; option
711	B<-tint>.
712
713	=item B<shading:> I<number>
714
715	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
716	in addition to tinting it; option B<-sh>.
717
718	=item B<blendType:> I<string>
719
720	Specify background blending type; option B<-blt>.
721
722	=item B<blurRadius:> I<number>
723
724	Apply gaussian blur with the specified radius to the transparent
725	background image; option B<-blr>.
726
727	=item B<iconFile:> I<file>	676	=item B<iconFile:> I<file>
728		677
729	Set the application icon pixmap; option B<-icon>.	678	Set the application icon pixmap; option B<-icon>.
730		679
731	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
…		…
739		688
740	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
741		690
742	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
743	and the text.	692	and the text.
744
745	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
746
747	Use the specified image file for the background and also
748	optionally specify its scaling with a geometry string B<WxH+X+Y>,
749	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
750	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
751	centre (percent). A scale of 0 displays the image with tiling. A scale
752	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
753	an integer number of images in that direction. No image will be magnified
754	beyond 10 times its original size. The maximum permitted scale is 1000.
755	Additional operations can be specified after colon B<:op1:op2...>.
756	Supported operations are:
757
758	tile force background image to be tiled and not scaled. Equivalent to 0x0
759	propscale will scale image keeping proportions
760	auto will scale image to match window size. Equivalent to 100x100
761	hscale will scale image horizontally to the window size
762	vscale will scale image vertically to the window size
763	scale will scale image to match window size
764	root will tile image as if it was a root window background, auto-adjusting
765	whenever terminal window moves
766
767	If used in conjunction with B<-tr> option, the specified pixmap will be
768	blended over transparency image using either alpha-blending, or any
769	other blending type, specified with B<-blt "type"> option.
770
771	=item B<path:> I<path>
772
773	Specify the colon-delimited search path for finding background image files.
774		693
775	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
776		695
777	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
778	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
801	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
802	wide and 15 pixels high.	721	wide and 15 pixels high.
803		722
804	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
805	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
806	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
807	useful supplement.	726	useful supplement.
808		727
809	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
810	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
811	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
875		794
876	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
877	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
878	[default]; option B<+ls>.	797	[default]; option B<+ls>.
879		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
880	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
881		805
882	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
883	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
884	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
901	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
902		826
903	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
904	the author's favourite.	828	the author's favourite.
905		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
906	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
907		835
908	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
909	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
910		838
…		…
929	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
930	B<+si>.	858	B<+si>.
931		859
932	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
933		861
934	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
935	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
936	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
937		866
938	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
939		868
940	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
941	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
…		…
997	=item B<cursorBlink:> I<boolean>	926	=item B<cursorBlink:> I<boolean>
998		927
999	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	928	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
1000	option B<-bc>.	929	option B<-bc>.
1001		930
		931	=item B<cursorUnderline:> I<boolean>
		932
		933	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		934	option B<-uc>.
		935
1002	=item B<pointerBlank:> I<boolean>	936	=item B<pointerBlank:> I<boolean>
1003		937
1004	B<True>: blank the pointer when a key is pressed or after a set number	938	B<True>: blank the pointer when a key is pressed or after a set number
1005	of seconds of inactivity. B<False>: the pointer is always visible	939	of seconds of inactivity. B<False>: the pointer is always visible
1006	[default].	940	[default].
…		…
1019	large number (e.g. C<987654321>) to effectively disable the timeout.	953	large number (e.g. C<987654321>) to effectively disable the timeout.
1020		954
1021	=item B<backspacekey:> I<string>	955	=item B<backspacekey:> I<string>
1022		956
1023	The string to send when the backspace key is pressed. If set to B<DEC>	957	The string to send when the backspace key is pressed. If set to B<DEC>
1024	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	958	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1025	(code 8) - which can be reversed with the appropriate DEC private mode	959	(code 8) - which can be reversed with the appropriate DEC private mode
1026	escape sequence.	960	escape sequence.
1027		961
1028	=item B<deletekey:> I<string>	962	=item B<deletekey:> I<string>
1029		963
…		…
1046		980
1047	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	981	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1048		982
1049	=item B<preeditType:> I<style>	983	=item B<preeditType:> I<style>
1050		984
1051	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	985	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1052		986
1053	=item B<inputMethod:> I<name>	987	=item B<inputMethod:> I<name>
1054		988
1055	I<name> of inputMethod to use; option B<-im>.	989	I<name> of inputMethod to use; option B<-im>.
1056		990
…		…
1125	Sets the working directory for the shell (or the command specified via	1059	Sets the working directory for the shell (or the command specified via
1126	B<-e>). The I<path> must be an absolute path and it must exist for	1060	B<-e>). The I<path> must be an absolute path and it must exist for
1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1061	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1128	directory will be used; option B<-cd>.	1062	directory will be used; option B<-cd>.
1129		1063
1130	=item B<keysym.>I<sym>: I<string>	1064	=item B<keysym.>I<sym>: I<action>
1131		1065
1132	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1066	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1133	intervening resource name B<keysym.> cannot be omitted.	1067	resource name B<keysym.> cannot be omitted.
1134		1068
1135	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1069	Using this resource, you can map key combinations such as
1136	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1070	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1137	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1071	string than would normally result from that combination, making the
1138	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1072	terminal scroll up or down the way you want it, or any other thing an
1139	B<2>, B<3>, B<4>, B<5>.	1073	extension might provide.
		1074
		1075	The key combination that triggers the action, I<sym>, has the following format:
		1076
		1077	(modifiers-)key
		1078
		1079	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1080	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1081	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1082	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1140		1083
1141	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1084	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1142	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1085	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1143	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1086	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1144	current application keymap mode state.	1087	current application keymap mode state.
1145		1088
1146	The spellings of I<key> can be obtained by using B<xev>(1) command or	1089	Due the the large number of modifier combinations, a key mapping will
1147	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1090	match if I<at least> the specified identifiers are being set, and no other
		1091	key mappings with those and more bits are being defined. That means that
		1092	defining a mapping for C<a> will automatically provide definitions for
		1093	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1094	themselves. See the C<builtin:> action, below, for a way to work around
		1095	this when this is a problem.
		1096
		1097	The spelling of I<key> depends on your implementation of X. An easy way to
		1098	find a key name is to use the B<xev>(1) command. You can find a list by
		1099	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1148	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1100	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1149	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1101	value (B<0x0000 - 0xFFFF>).
1150	performed in an exact manner; however, the closest match is assured.
1151		1102
1152	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1103	As with any resource value, the I<action> string may contain backslash
		1104	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1153	number), see RESOURCES in C<man 7 X> for futher details.	1105	number), see RESOURCES in C<man 7 X> for further details.
1154		1106
1155	You can define a range of keysyms in one shot by providing a I<string>	1107	An action starts with an action prefix that selects a certain type
1156	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1108	of action, followed by a colon. An action string without colons is
		1109	interpreted as a literal string to pass to the tty (as if it was
		1110	prefixed with C<string:>).
		1111
		1112	The following action prefixes are known - extensions can provide
		1113	additional prefixes:
		1114
		1115	=over 4
		1116
		1117	=item string:STRING
		1118
		1119	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1120	then the remaining C<STRING> will be passed to the program running in the
		1121	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1122	string C<echo rm -rf /> followed by a newline:
		1123
		1124	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1125
		1126	This could in theory be used to completely redefine your keymap.
		1127
		1128	In addition, for actions of this type, you can define a range of
		1129	keysyms in one shot by loading the C<keysym-list> perl extension and
		1130	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1157	should be a character not used by the strings.	1131	the delimiter `/' should be a character not used by the strings.
1158		1132
1159	Its usage can be demonstrated by an example:	1133	Its usage can be demonstrated by an example:
1160		1134
1161	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1135	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1162		1136
1163	The above line is equivalent to the following three lines:	1137	The above line is equivalent to the following three lines:
1164		1138
1165	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1139	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1166	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1140	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1167	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1141	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1168		1142
		1143	=item command:STRING
		1144
1169	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1145	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1170	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1146	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1147	the opposite of C<string:> - instead of sending it to the program running
		1148	in the terminal, it will be treated as if it were program output). This is
		1149	most useful to feed command sequences into @@RXVT_NAME@@.
		1150
1171	example the following means "change the current locale to C<zh_CN.GBK>	1151	For example the following means "change the current locale to C<zh_CN.GBK>
1172	when Control-Meta-c is being pressed":	1152	when Control-Meta-c is being pressed":
1173		1153
1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1154	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1175		1155
1176	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1156	The following example will map Control-Meta-1 and Control-Meta-2 to
1177	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1157	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1178	manpage. For example, the F<selection> extension (activated via	1158	font-switching at runtime:
1179	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1180		1159
1181	URxvt.keysym.M-C-c: perl:selection:rot13	1160	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1161	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1182		1162
1183	Due the the large number of modifier combinations, a defined key mapping	1163	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1184	will match if at I<at least> the specified identifiers are being set, and	1164	info):
1185	no other key mappings with those and more bits are being defined. That
1186	means that defining a key map for C<a> will automatically provide
1187	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1188	mappings themselves.
1189		1165
1190	Unfortunately, this will override built-in key mappings. For example	1166	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1167	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1168
		1169	=item builtin:
		1170
		1171	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1172	key binding existed for the key combination. The obvious use is to undo
		1173	the effect of existing bindings. The not so obvious use is to reinstate
		1174	bindings when another binding overrides too many modifiers.
		1175
1191	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1176	For example if you overwrite the C<Insert> key you will disable
1192	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1177	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1193	user-defined keymap using the C<builtin:> replacement:	1178	"holes" into the user-defined keymap using the C<builtin:> replacement:
1194		1179
1195	URxvt.keysym.Insert: <my insert key sequence>	1180	URxvt.keysym.Insert: <my insert key sequence>
1196	URxvt.keysym.S-Insert: builtin:	1181	URxvt.keysym.S-Insert: builtin:
1197		1182
1198	The first line defines a mapping for C<Insert> and I<any> combination	1183	The first line defines a mapping for C<Insert> and I<any> combination
1199	of modifiers. The second line re-establishes the default mapping for	1184	of modifiers. The second line re-establishes the default mapping for
1200	C<Shift-Insert>.	1185	C<Shift-Insert>.
1201		1186
1202	The following example will map Control-Meta-1 and Control-Meta-2 to	1187	=item builtin-string:
1203	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1204	font-switching at runtime:
1205		1188
1206	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1189	This action is mainly useful to restore string mappings for keys that
1207	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1190	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1191	difficult to explain - basically, this action will send the string to the
		1192	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1193	action for it.
1208		1194
1209	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1195	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1210	info):	1196	selection when you press C<Shift-Insert>. With the following bindings, it
		1197	would instead emit the (undocumented, but what applications running in the
		1198	terminal might expect) sequence C<ESC [ 2 $> instead:
1211		1199
1212	URxvt.keysym.M-C-3: command:\033[8;25;80t	1200	URxvt.keysym.S-Insert: builtin-string:
1213	URxvt.keysym.M-C-4: command:\033[8;48;110t	1201	URxvt.keysym.C-S-Insert: builtin:
		1202
		1203	The first line disables the paste functionality for that key
		1204	combination, and the second reinstates the default behaviour for
		1205	C<Control-Shift-Insert>, which would otherwise be overridden.
		1206
		1207	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1208	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1209	this:
		1210
		1211	URxvt.keysym.C-M-c: builtin-string:
		1212	URxvt.keysym.C-M-v: builtin-string:
		1213
		1214	=item EXTENSION:STRING
		1215
		1216	An action of this form invokes the action B<STRING>, if any, provided
		1217	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1218	be loaded automatically if necessary.
		1219
		1220	Not all extensions define actions, but popular extensions that do
		1221	include the I<selection> and I<matcher> extensions (documented in their
		1222	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1223	respectively).
		1224
		1225	From the silly examples department, this will rot13-"encrypt"
		1226	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1227	keyboards:
		1228
		1229	URxvt.keysym.M-C-c: selection:rot13
		1230
		1231	=item perl:STRING DEPRECATED
		1232
		1233	This is a deprecated way of invoking commands provided by perl
		1234	extensions. It is still supported, but should not be used anymore.
		1235
		1236	=back
1214		1237
1215	=item B<perl-ext-common>: I<string>	1238	=item B<perl-ext-common>: I<string>
1216		1239
1217	=item B<perl-ext>: I<string>	1240	=item B<perl-ext>: I<string>
1218		1241
…		…
1220	use in this terminal instance; option B<-pe>.	1243	use in this terminal instance; option B<-pe>.
1221		1244
1222	Extension names can be prefixed with a C<-> sign to prohibit using	1245	Extension names can be prefixed with a C<-> sign to prohibit using
1223	them. This can be useful to selectively disable some extensions loaded	1246	them. This can be useful to selectively disable some extensions loaded
1224	by default, or specified via the C<perl-ext-common> resource. For	1247	by default, or specified via the C<perl-ext-common> resource. For
1225	example, C<default,-selection> will use all the default extension except	1248	example, C<default,-selection> will use all the default extensions except
1226	C<selection>.	1249	C<selection>.
1227		1250
1228	Extension names can also be followed by an argument in angle brackets	1251	The default set includes the C<selection>, C<option-popup>,
1229	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1252	C<selection-popup>, C<readline> and C<searchable-scrollback>
1230	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1253	extensions, and extensions which are mentioned in B<keysym> resources.
1231	multiple times with different arguments will pass multiple arguments to	1254
1232	the extension.	1255	Any extension such that a corresponding resource is given on the
		1256	command line is automatically appended to B<perl-ext>.
1233		1257
1234	Each extension is looked up in the library directories, loaded if	1258	Each extension is looked up in the library directories, loaded if
1235	necessary, and bound to the current terminal instance.	1259	necessary, and bound to the current terminal instance. When the library
		1260	search path contains multiple extension files of the same name, then the
		1261	first one found will be used.
1236		1262
1237	If both of these resources are the empty string, then the perl	1263	If both of these resources are the empty string, then the perl interpreter
1238	interpreter will not be initialized. The idea behind two options is that	1264	will not be initialized. The rationale for having two options is that
1239	B<perl-ext-common> will be used for extensions that should be available to	1265	B<perl-ext-common> will be used for extensions that should be available to
1240	all instances, while B<perl-ext> is used for specific instances.	1266	all instances, while B<perl-ext> is used for specific instances.
1241		1267
1242	=item B<perl-eval>: I<string>	1268	=item B<perl-eval>: I<string>
1243		1269
…		…
1245	the @@RXVT_NAME@@perl(3) manpage.	1271	the @@RXVT_NAME@@perl(3) manpage.
1246		1272
1247	=item B<perl-lib>: I<path>	1273	=item B<perl-lib>: I<path>
1248		1274
1249	Colon-separated list of additional directories that hold extension	1275	Colon-separated list of additional directories that hold extension
1250	scripts. When looking for extensions specified by the C<perl> resource,	1276	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1251	@@RXVT_NAME@@ will first look in these directories and then in	1277	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1252	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1278	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1253		1279
1254	See the @@RXVT_NAME@@perl(3) manpage.	1280	See the @@RXVT_NAME@@perl(3) manpage.
1255		1281
1256	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1282	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1257		1283
…		…
1261	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1287	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1262		1288
1263	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1289	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1264	for details.	1290	for details.
1265		1291
1266	=item B<searchable-scrollback:> I<keysym>	1292	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1267		1293
1268	Sets the hotkey that starts the incremental scrollback buffer search	1294	This resource is deprecated and will be removed. Use a B<keysym> resource
1269	(default: C<M-s>).	1295	instead, e.g.:
1270		1296
		1297	URxvt.keysym.M-s: searchable-scrollback:start
		1298
1271	=item B<urlLauncher>: I<string>	1299	=item B<url-launcher>: I<string>
1272		1300
1273	Specifies the program to be started with a URL argument. Used by the	1301	Specifies the program to be started with a URL argument. Used by the
1274	C<selection-popup> and C<matcher> perl extensions.	1302	C<selection-popup> and C<matcher> perl extensions.
1275		1303
1276	=item B<transient-for>: I<windowid>	1304	=item B<transient-for>: I<windowid>
…		…
1280	=item B<override-redirect>: I<boolean>	1308	=item B<override-redirect>: I<boolean>
1281		1309
1282	Compile I<frills>: Sets override-redirect for the terminal window, making	1310	Compile I<frills>: Sets override-redirect for the terminal window, making
1283	it almost invisible to window managers; option B<-override-redirect>.	1311	it almost invisible to window managers; option B<-override-redirect>.
1284		1312
		1313	=item B<iso14755:> I<boolean>
		1314
		1315	Turn on/off ISO 14755 (default enabled).
		1316
1285	=item B<iso14755_52:> I<boolean>	1317	=item B<iso14755_52:> I<boolean>
1286		1318
1287	Turn on/off ISO 14755 5.2 mode (default enabled).	1319	Turn on/off ISO 14755 5.2 mode (default enabled).
		1320
		1321	=back
		1322
		1323	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1324
		1325	=over 4
		1326
		1327	=item B<-pixmap> I<file[;oplist]>
		1328
		1329	=item B<backgroundPixmap:> I<file[;oplist]>
		1330
		1331	Compile I<pixbuf>: Use the specified image file as the window's
		1332	background and also optionally specify a colon separated list of
		1333	operations to modify it. Note that you may need to quote the C<;>
		1334	character when using the command line option, as C<;> is usually a
		1335	metacharacter in shells. Supported operations are:
		1336
		1337	=over 4
		1338
		1339	=item B<WxH+X+Y>
		1340
		1341	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1342	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1343	scale of 0 disables scaling.
		1344
		1345	=item B<op=tile>
		1346
		1347	enables tiling
		1348
		1349	=item B<op=keep-aspect>
		1350
		1351	maintain the image aspect ratio when scaling
		1352
		1353	=item B<op=root-align>
		1354
		1355	use the position of the terminal window relative to the root window as
		1356	the image offset, simulating a root window background
		1357
		1358	=back
		1359
		1360	The default scale and position setting is C<100x100+50+50>.
		1361	Alternatively, a predefined set of templates can be used to achieve
		1362	the most common setups:
		1363
		1364	=over 4
		1365
		1366	=item B<style=tiled>
		1367
		1368	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1369
		1370	=item B<style=aspect-stretched>
		1371
		1372	the image is scaled to fill the whole window maintaining the aspect
		1373	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1374
		1375	=item B<style=stretched>
		1376
		1377	the image is scaled to fill the whole window. Equivalent to 100x100
		1378
		1379	=item B<style=centered>
		1380
		1381	the image is centered with no scaling. Equivalent to 0x0+50+50
		1382
		1383	=item B<style=root-tiled>
		1384
		1385	the image is tiled with no scaling and using 'root' positioning.
		1386	Equivalent to 0x0:op=tile:op=root-align
		1387
		1388	=back
		1389
		1390	If multiple templates are specified the last one wins. Note that a
		1391	template overrides all the scale, position and operations settings.
		1392
		1393	If used in conjunction with pseudo-transparency, the specified pixmap
		1394	will be blended over the transparent background using alpha-blending.
		1395
		1396	=item B<-tr>\|B<+tr>
		1397
		1398	=item B<transparent:> I<boolean>
		1399
		1400	Turn on/off pseudo-transparency by using the root pixmap as background.
		1401
		1402	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1403	will be removed in future versions.
		1404
		1405	=item B<-tint> I<colour>
		1406
		1407	=item B<tintColor:> I<colour>
		1408
		1409	Tint the transparent background with the given colour. Note that a
		1410	black tint yields a completely black image while a white tint yields
		1411	the image unchanged.
		1412
		1413	=item B<-sh> I<number>
		1414
		1415	=item B<shading:> I<number>
		1416
		1417	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1418	A value of 100 means no shading.
		1419
		1420	=item B<-blr> I<HxV>
		1421
		1422	=item B<blurRadius:> I<HxV>
		1423
		1424	Apply gaussian blur with the specified radius to the transparent
		1425	background. If a single number is specified, the vertical and
		1426	horizontal radii are considered to be the same. Setting one of the
		1427	radii to 1 and the other to a large number creates interesting effects
		1428	on some backgrounds. The maximum radius value is 128. An horizontal or
		1429	vertical radius of 0 disables blurring.
		1430
		1431	=item B<path:> I<path>
		1432
		1433	Specify the colon-delimited search path for finding background image files.
1288		1434
1289	=back	1435	=back
1290		1436
1291	=head1 THE SCROLLBAR	1437	=head1 THE SCROLLBAR
1292		1438
…		…
1340	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1486	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1341	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1487	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1342		1488
1343	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1489	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1344	inserted too.	1490	inserted too.
		1491
		1492	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1493	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1494	binding causes the value of the internal selection to be copied to the
		1495	CLIPBOARD selection, while the second binding causes the value of the
		1496	CLIPBOARD selection to be inserted.
1345		1497
1346	=back	1498	=back
1347		1499
1348	=head1 CHANGING FONTS	1500	=head1 CHANGING FONTS
1349		1501
…		…
1431	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1583	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1432	it can be seen via the I<who(1)> command, and can accept messages. To	1584	it can be seen via the I<who(1)> command, and can accept messages. To
1433	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1585	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1434	on some systems or setgid to root or to some other group on others.	1586	on some systems or setgid to root or to some other group on others.
1435		1587
1436	=head1 COLORS AND GRAPHICS	1588	=head1 COLOURS AND GRAPHICS
1437		1589
1438	In addition to the default foreground and background colours,	1590	In addition to the default foreground and background colours,
1439	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1591	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1440	high-intensity bold/blink versions of the same). Here is a list of the	1592	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1441	colours with their names.	1593	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1594	cube plus a 8 (24) colour greyscale ramp.
		1595
		1596	Here is a list of the ANSI colours with their names.
1442		1597
1443	=begin table	1598	=begin table
1444		1599
1445	B<color0> (black) = Black	1600	B<color0> (black) = Black
1446	B<color1> (red) = Red3	1601	B<color1> (red) = Red3
…		…
1466	It is also possible to specify the colour values of B<foreground>,	1621	It is also possible to specify the colour values of B<foreground>,
1467	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1622	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1468	a number 0-15, as a convenient shorthand to reference the colour name of	1623	a number 0-15, as a convenient shorthand to reference the colour name of
1469	color0-color15.	1624	color0-color15.
1470		1625
1471	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1626	The following text gives values for the standard 88 colour mode (and
1472	additional 72 colours. The first 64 of those (with indices 16 to 79)	1627	values for the 256 colour mode in parentheses).
1473	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1474	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1475		1628
		1629	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1630
		1631	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1632	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1633
		1634	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1635	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1636	the RGB cube.
		1637
1476	Together, all those colours implement the 88 colour xterm colours. Only	1638	Together, all those colours implement the 88 (256) colour xterm
1477	the first 16 can be changed using resources currently, the rest can only	1639	colours. Only the first 16 can be changed using resources currently, the
1478	be changed via command sequences ("escape codes").	1640	rest can only be changed via command sequences ("escape codes").
		1641
		1642	Applications are advised to use terminfo or command sequences to discover
		1643	number and RGB values of all colours (yes, you can query this...).
1479		1644
1480	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1645	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1481	always swapping the foreground/background colours. This is in contrast to	1646	always swapping the foreground/background colours. This is in contrast to
1482	I<xterm>(1) where the colours are only swapped if they have not otherwise	1647	I<xterm>(1) where the colours are only swapped if they have not otherwise
1483	been specified. For example,	1648	been specified. For example,
1484		1649
1485	=over 4
1486
1487	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1650	@@RXVT_NAME@@ -fg Black -bg White -rv
1488		1651
1489	would yield White on Black, while on I<xterm>(1) it would yield Black	1652	would yield White on Black, while on I<xterm>(1) it would yield Black on
1490	on White.	1653	White.
1491
1492	=back
1493		1654
1494	=head2 ALPHA CHANNEL SUPPORT	1655	=head2 ALPHA CHANNEL SUPPORT
1495		1656
1496	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1657	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1497	their act together, rxvt-unicode will do it's own alpha channel management:	1658	their act together, rxvt-unicode will do its own alpha channel management:
1498		1659
1499	You can prefix any color with an opaquenes percentage enclosed in	1660	You can prefix any colour with an opaqueness percentage enclosed in
1500	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1661	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1501	(0-100) that specifies the opacity of the color, where C<0> is completely	1662	(0-100) that specifies the opacity of the colour, where C<0> is completely
1502	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1663	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1503	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1664	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1504	is the recommended format to specify transparency values, and works with	1665	is the recommended format to specify transparency values, and works with
1505	all ways to specify a colour.	1666	all ways to specify a colour.
1506		1667
…		…
1584		1745
1585	=item B<SHELL>	1746	=item B<SHELL>
1586		1747
1587	The shell to be used for command execution, defaults to C</bin/sh>.	1748	The shell to be used for command execution, defaults to C</bin/sh>.
1588		1749
1589	=item B<RXVT_SOCKET>	1750	=item B<RXVT_SOCKET> [I<sic>]
1590		1751
1591	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1752	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1592	@@RXVT_NAME@@d(1).	1753	@@RXVT_NAME@@d(1).
1593		1754
1594	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1755	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1756
		1757	=item B<URXVT_PERL_LIB>
		1758
		1759	Additional F<:>-separated library search path for perl extensions. Will be
		1760	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1761	directory.
		1762
		1763	=item B<URXVT_PERL_VERBOSITY>
		1764
		1765	See L<@@RXVT_NAME@@perl>(3).
1595		1766
1596	=item B<HOME>	1767	=item B<HOME>
1597		1768
1598	Used to locate the default directory for the unix domain socket for	1769	Used to locate the default directory for the unix domain socket for
1599	daemon communications and to locate various resource files (such as	1770	daemon communications and to locate various resource files (such as
1600	C<.Xdefaults>)	1771	C<.Xdefaults>)
1601		1772
1602	=item B<XAPPLRESDIR>	1773	=item B<XAPPLRESDIR>
1603		1774
1604	Directory where various X resource files are being located.	1775	Directory where application-specific X resource files are located.
1605		1776
1606	=item B<XENVIRONMENT>	1777	=item B<XENVIRONMENT>
1607		1778
1608	If set and accessible, gives the name of a X resource file to be loaded by	1779	If set and accessible, gives the name of a X resource file to be loaded by
1609	@@RXVT_NAME@@.	1780	@@RXVT_NAME@@.
…		…
1614		1785
1615	=over 4	1786	=over 4
1616		1787
1617	=item B</usr/lib/X11/rgb.txt>	1788	=item B</usr/lib/X11/rgb.txt>
1618		1789
1619	Color names.	1790	Colour names.
1620		1791
1621	=back	1792	=back
1622		1793
1623	=head1 SEE ALSO	1794	=head1 SEE ALSO
1624		1795
		1796	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1625	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1797	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1626		1798
1627	=head1 CURRENT PROJECT COORDINATOR	1799	=head1 CURRENT PROJECT COORDINATOR
1628		1800
1629	=over 4	1801	=over 4
1630		1802
1631	=item Project Coordinator	1803	=item Project Coordinator
1632		1804
1633	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1805	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1634		1806
1635	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1807	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1636		1808
1637	=back	1809	=back
1638		1810
…		…
1642		1814
1643	=item John Bovey	1815	=item John Bovey
1644		1816
1645	University of Kent, 1992, wrote the original Xvt.	1817	University of Kent, 1992, wrote the original Xvt.
1646		1818
1647	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1819	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1648		1820
1649	very heavily modified Xvt and came up with Rxvt	1821	very heavily modified Xvt and came up with Rxvt
1650		1822
1651	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1823	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1652		1824
1653	wrote the Greek Keyboard Input (no longer in code)	1825	wrote the Greek Keyboard Input (no longer in code)
1654		1826
1655	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1827	=item mj olesen <olesen@me.QueensU.CA>
1656		1828
1657	Wrote the menu system.	1829	Wrote the menu system.
1658		1830
1659	Project Coordinator (changes.txt 2.11 to 2.21)	1831	Project Coordinator (changes.txt 2.11 to 2.21)
1660		1832
1661	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1833	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1662		1834
1663	Project Coordinator (changes.txt 2.21a to 2.4.5)	1835	Project Coordinator (changes.txt 2.21a to 2.4.5)
1664		1836
1665	=item Geoff Wing L<< <gcw@pobox.com> >>	1837	=item Geoff Wing <gcw@pobox.com>
1666		1838
1667	Rewrote screen display and text selection routines.	1839	Rewrote screen display and text selection routines.
1668		1840
1669	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1841	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1670		1842
1671	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1843	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1672		1844
1673	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1845	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1674	extension, random hacks, numerous bugfixes and extensions.	1846	extension, random hacks, numerous bugfixes and extensions.
1675		1847
1676	Project Coordinator (Changes 1.0 -)	1848	Project Coordinator (Changes 1.0 -)
1677		1849
1678	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1850	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1679		1851
1680	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1852	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1681		1853
1682	=back	1854	=back
1683		1855

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs. Revision 1.243 by root, Sat May 30 21:02:05 2015 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs.
Revision 1.243 by root, Sat May 30 21:02:05 2015 UTC