[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs.
Revision 1.239 by sf-exg, Sun Oct 12 20:51:51 2014 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for possible
		114	visual ids).
		115
111	=item B<-geometry> I<geom>	116	=item B<-geometry> I<geom>
112		117
113	Window geometry (B<-g> still respected); resource B<geometry>.	118	Window geometry (B<-g> still respected); resource B<geometry>.
114		119
115	=item B<-rv>\|B<+rv>	120	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	126	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		127
123	=item B<-ss>\|B<+ss>	128	=item B<-ss>\|B<+ss>
124		129
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	130	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		131
137	=item B<-fade> I<number>	132	=item B<-fade> I<number>
138		133
139	Fade the text by the given percentage when focus is lost. Small values	134	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	135	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	138	=item B<-fadecolor> I<colour>
144		139
145	Fade to this colour when fading is used (see B<-fade>). The default colour	140	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	141	is opaque black. resource B<fadeColor>.
147		142
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colours essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	143	=item B<-icon> I<file>
188		144
189	Compile I<afterimage>: Use the specified image as application icon. This	145	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	146	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	147	application window; resource I<iconFile>.
192		148
193	=item B<-bg> I<colour>	149	=item B<-bg> I<colour>
194		150
195	Window background colour; resource B<background>.	151	Window background colour; resource B<background>.
196		152
197	=item B<-fg> I<colour>	153	=item B<-fg> I<colour>
198		154
199	Window foreground colour; resource B<foreground>.	155	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		156
208	=item B<-cr> I<colour>	157	=item B<-cr> I<colour>
209		158
210	The cursor colour; resource B<cursorColor>.	159	The cursor colour; resource B<cursorColor>.
211		160
…		…
270		219
271	=item B<-ls>\|B<+ls>	220	=item B<-ls>\|B<+ls>
272		221
273	Start as a login-shell/sub-shell; resource B<loginShell>.	222	Start as a login-shell/sub-shell; resource B<loginShell>.
274		223
		224	=item B<-mc> I<milliseconds>
		225
		226	Specify the maximum time between multi-click selections.
		227
275	=item B<-ut>\|B<+ut>	228	=item B<-ut>\|B<+ut>
276		229
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	230	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	231	B<utmpInhibit>.
279		232
…		…
357		310
358	=item B<-override-redirect>	311	=item B<-override-redirect>
359		312
360	Compile I<frills>: Sets override-redirect on the window; resource	313	Compile I<frills>: Sets override-redirect on the window; resource
361	B<override-redirect>.	314	B<override-redirect>.
		315
		316	=item B<-dockapp>
		317
		318	Sets the initial state of the window to WithdrawnState, which makes
		319	window managers that support this extension treat it as a dockapp.
362		320
363	=item B<-sbg>	321	=item B<-sbg>
364		322
365	Compile I<frills>: Disable the usage of the built-in block graphics/line	323	Compile I<frills>: Disable the usage of the built-in block graphics/line
366	drawing characters and just rely on what the specified fonts provide. Use	324	drawing characters and just rely on what the specified fonts provide. Use
…		…
571	You can set and change the resources using X11 tools like B<xrdb>. Many	529	You can set and change the resources using X11 tools like B<xrdb>. Many
572	distribution do also load settings from the B<~/.Xresources> file when X	530	distribution do also load settings from the B<~/.Xresources> file when X
573	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	531	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
574	with later settings overwriting earlier ones:	532	with later settings overwriting earlier ones:
575		533
576	1. system-wide app-defaults file, either locale-dependent OR global
577	2. app-defaults file in $XAPPLRESDIR	534	1. app-defaults file in $XAPPLRESDIR
		535	2. $HOME/.Xdefaults
578	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	536	3. RESOURCE_MANAGER property on root-window of screen 0
579	4. SCREEN_RESOURCES for the current screen	537	4. SCREEN_RESOURCES property on root-window of the current screen
580	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	538	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
581	6. resources specified via -xrm on the commandline	539	6. resources specified via -xrm on the commandline
582		540
583	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	541	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
584	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	542	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
700		658
701	B<False>: specify that everything is to be displayed, even	659	B<False>: specify that everything is to be displayed, even
702	if the refresh is too fast for the human eye to read anything (or the	660	if the refresh is too fast for the human eye to read anything (or the
703	monitor to display anything); option B<+ss>.	661	monitor to display anything); option B<+ss>.
704		662
705	=item B<transparent:> I<boolean>
706
707	Turn on/off illusion of a transparent window background.
708
709	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
710	future versions.
711
712	I<Please address all transparency related issues to Sasha Vasko at
713	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
714
715	=item B<fading:> I<number>	663	=item B<fading:> I<number>
716		664
717	Fade the text by the given percentage when focus is lost; option B<-fade>.	665	Fade the text by the given percentage when focus is lost; option B<-fade>.
718		666
719	=item B<fadeColor:> I<colour>	667	=item B<fadeColor:> I<colour>
720		668
721	Fade to this colour, when fading is used (see B<fading:>). The default	669	Fade to this colour, when fading is used (see B<fading:>). The default
722	colour is black; option B<-fadecolor>.	670	colour is black; option B<-fadecolor>.
723		671
724	=item B<tintColor:> I<colour>
725
726	Tint the transparent background pixmap with the given colour; option
727	B<-tint>.
728
729	=item B<shading:> I<number>
730
731	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
732	in addition to tinting it; option B<-sh>.
733
734	=item B<blendType:> I<string>
735
736	Specify background blending type; option B<-blt>.
737
738	=item B<blurRadius:> I<number>
739
740	Apply gaussian blur with the specified radius to the transparent
741	background image; option B<-blr>.
742
743	=item B<iconFile:> I<file>	672	=item B<iconFile:> I<file>
744		673
745	Set the application icon pixmap; option B<-icon>.	674	Set the application icon pixmap; option B<-icon>.
746		675
747	=item B<scrollColor:> I<colour>	676	=item B<scrollColor:> I<colour>
…		…
755		684
756	=item B<borderColor:> I<colour>	685	=item B<borderColor:> I<colour>
757		686
758	The colour of the border around the text area and between the scrollbar	687	The colour of the border around the text area and between the scrollbar
759	and the text.	688	and the text.
760
761	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
762
763	Use the specified image file for the background and also
764	optionally specify its scaling with a geometry string B<WxH+X+Y>,
765	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
766	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
767	centre (percent). A scale of 0 displays the image with tiling. A scale
768	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
769	an integer number of images in that direction. No image will be magnified
770	beyond 10 times its original size. The maximum permitted scale is 1000.
771	Additional operations can be specified after colon B<:op1:op2...>.
772	Supported operations are:
773
774	tile force background image to be tiled and not scaled. Equivalent to 0x0
775	propscale will scale image keeping proportions
776	auto will scale image to match window size. Equivalent to 100x100
777	hscale will scale image horizontally to the window size
778	vscale will scale image vertically to the window size
779	scale will scale image to match window size
780	root will tile image as if it was a root window background, auto-adjusting
781	whenever terminal window moves
782
783	If used in conjunction with B<-tr> option, the specified pixmap will be
784	blended over transparency image using either alpha-blending, or any
785	other blending type, specified with B<-blt "type"> option.
786
787	=item B<path:> I<path>
788
789	Specify the colon-delimited search path for finding background image files.
790		689
791	=item B<font:> I<fontlist>	690	=item B<font:> I<fontlist>
792		691
793	Select the fonts to be used. This is a comma separated list of font names	692	Select the fonts to be used. This is a comma separated list of font names
794	that are checked in order when trying to find glyphs for characters. The	693	that are checked in order when trying to find glyphs for characters. The
…		…
891		790
892	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	791	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
893	the shell; option B<-ls>. B<False>: start as a normal sub-shell	792	the shell; option B<-ls>. B<False>: start as a normal sub-shell
894	[default]; option B<+ls>.	793	[default]; option B<+ls>.
895		794
		795	=item B<multiClickTime:> I<number>
		796
		797	Specify the maximum time in milliseconds between multi-click select
		798	events. The default is 500 milliseconds; option B<-mc>.
		799
896	=item B<utmpInhibit:> I<boolean>	800	=item B<utmpInhibit:> I<boolean>
897		801
898	B<True>: inhibit writing record into the system log file B<utmp>;	802	B<True>: inhibit writing record into the system log file B<utmp>;
899	option B<-ut>. B<False>: write record into the system log file B<utmp>	803	option B<-ut>. B<False>: write record into the system log file B<utmp>
900	[default]; option B<+ut>.	804	[default]; option B<+ut>.
…		…
917	=item B<scrollstyle:> I<mode>	821	=item B<scrollstyle:> I<mode>
918		822
919	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	823	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
920	the author's favourite.	824	the author's favourite.
921		825
		826	=item B<thickness:> I<number>
		827
		828	Set the scrollbar width in pixels.
		829
922	=item B<scrollBar:> I<boolean>	830	=item B<scrollBar:> I<boolean>
923		831
924	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	832	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
925	disable the scrollbar; option B<+sb>.	833	disable the scrollbar; option B<+sb>.
926		834
…		…
945	B<False>: do not scroll to bottom when tty receives output; option	853	B<False>: do not scroll to bottom when tty receives output; option
946	B<+si>.	854	B<+si>.
947		855
948	=item B<scrollWithBuffer:> I<boolean>	856	=item B<scrollWithBuffer:> I<boolean>
949		857
950	B<True>: scroll with scrollback buffer when tty receives new lines (and	858	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
951	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	859	try to show the same lines) and B<scrollTtyOutput> is False; option
952	with scrollback buffer when tty receives new lines; option B<+sw>.	860	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		861	new lines; option B<+sw>.
953		862
954	=item B<scrollTtyKeypress:> I<boolean>	863	=item B<scrollTtyKeypress:> I<boolean>
955		864
956	B<True>: scroll to bottom when a non-special key is pressed. Special keys	865	B<True>: scroll to bottom when a non-special key is pressed. Special keys
957	are those which are intercepted by rxvt-unicode for special handling and	866	are those which are intercepted by rxvt-unicode for special handling and
…		…
1040	large number (e.g. C<987654321>) to effectively disable the timeout.	949	large number (e.g. C<987654321>) to effectively disable the timeout.
1041		950
1042	=item B<backspacekey:> I<string>	951	=item B<backspacekey:> I<string>
1043		952
1044	The string to send when the backspace key is pressed. If set to B<DEC>	953	The string to send when the backspace key is pressed. If set to B<DEC>
1045	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	954	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1046	(code 8) - which can be reversed with the appropriate DEC private mode	955	(code 8) - which can be reversed with the appropriate DEC private mode
1047	escape sequence.	956	escape sequence.
1048		957
1049	=item B<deletekey:> I<string>	958	=item B<deletekey:> I<string>
1050		959
…		…
1146	Sets the working directory for the shell (or the command specified via	1055	Sets the working directory for the shell (or the command specified via
1147	B<-e>). The I<path> must be an absolute path and it must exist for	1056	B<-e>). The I<path> must be an absolute path and it must exist for
1148	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1057	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1149	directory will be used; option B<-cd>.	1058	directory will be used; option B<-cd>.
1150		1059
1151	=item B<keysym.>I<sym>: I<string>	1060	=item B<keysym.>I<sym>: I<action>
1152		1061
1153	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1062	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1154	intervening resource name B<keysym.> cannot be omitted.	1063	resource name B<keysym.> cannot be omitted.
1155		1064
1156	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1065	Using this resource, you can map key combinations such as
1157	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1066	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1158	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1067	string than would normally result from that combination, making the
1159	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1068	terminal scroll up or down the way you want it, or any other thing an
1160	B<2>, B<3>, B<4>, B<5>.	1069	extension might provide.
		1070
		1071	The key combination that triggers the action, I<sym>, has the following format:
		1072
		1073	(modifiers-)key
		1074
		1075	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1076	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1077	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1078	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1161		1079
1162	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1080	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1163	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1081	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1164	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1082	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1165	current application keymap mode state.	1083	current application keymap mode state.
1166		1084
1167	The spellings of I<key> can be obtained by using B<xev>(1) command or	1085	Due the the large number of modifier combinations, a key mapping will
1168	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1086	match if I<at least> the specified identifiers are being set, and no other
		1087	key mappings with those and more bits are being defined. That means that
		1088	defining a mapping for C<a> will automatically provide definitions for
		1089	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1090	themselves. See the C<builtin:> action, below, for a way to work around
		1091	this when this is a problem.
		1092
		1093	The spelling of I<key> depends on your implementation of X. An easy way to
		1094	find a key name is to use the B<xev>(1) command. You can find a list by
		1095	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1169	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1096	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1170	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1097	value (B<0x0000 - 0xFFFF>).
1171	performed in an exact manner; however, the closest match is assured.
1172		1098
1173	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1099	As with any resource value, the I<action> string may contain backslash
		1100	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1174	number), see RESOURCES in C<man 7 X> for futher details.	1101	number), see RESOURCES in C<man 7 X> for further details.
1175		1102
1176	You can define a range of keysyms in one shot by providing a I<string>	1103	An action starts with an action prefix that selects a certain type
1177	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1104	of action, followed by a colon. An action string without colons is
1178	should be a character not used by the strings.	1105	interpreted as a literal string to pass to the tty (as if it was
		1106	prefixed with C<string:>).
1179		1107
1180	Its usage can be demonstrated by an example:	1108	The following action prefixes are known - extensions can provide
		1109	additional prefixes:
1181		1110
1182	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1111	=over 4
1183		1112
1184	The above line is equivalent to the following three lines:	1113	=item string:STRING
1185		1114
1186	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1115	If the I<action> starts with C<string:> (or otherwise contains no colons),
1187	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1116	then the remaining C<STRING> will be passed to the program running in the
1188	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1117	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1118	string C<echo rm -rf /> followed by a newline:
1189		1119
		1120	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1121
		1122	This could in theory be used to completely redefine your keymap.
		1123
		1124	=item command:STRING
		1125
1190	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1126	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1191	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1127	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1128	the opposite of C<string:> - instead of sending it to the program running
		1129	in the terminal, it will be treated as if it were program output). This is
		1130	most useful to feed command sequences into @@RXVT_NAME@@.
		1131
1192	example the following means "change the current locale to C<zh_CN.GBK>	1132	For example the following means "change the current locale to C<zh_CN.GBK>
1193	when Control-Meta-c is being pressed":	1133	when Control-Meta-c is being pressed":
1194		1134
1195	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1135	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1196		1136
1197	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1137	The following example will map Control-Meta-1 and Control-Meta-2 to
1198	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1138	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1199	manpage. For example, the F<selection> extension (activated via	1139	font-switching at runtime:
1200	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1201		1140
1202	URxvt.keysym.M-C-c: perl:selection:rot13	1141	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1142	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1203		1143
1204	Due the the large number of modifier combinations, a defined key mapping	1144	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1205	will match if at I<at least> the specified identifiers are being set, and	1145	info):
1206	no other key mappings with those and more bits are being defined. That
1207	means that defining a key map for C<a> will automatically provide
1208	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1209	mappings themselves.
1210		1146
1211	Unfortunately, this will override built-in key mappings. For example	1147	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1148	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1149
		1150	=item builtin:
		1151
		1152	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1153	key binding existed for the key combination. The obvious use is to undo
		1154	the effect of existing bindings. The not so obvious use is to reinstate
		1155	bindings when another binding overrides too many modifiers.
		1156
1212	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1157	For example if you overwrite the C<Insert> key you will disable
1213	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1158	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1214	user-defined keymap using the C<builtin:> replacement:	1159	"holes" into the user-defined keymap using the C<builtin:> replacement:
1215		1160
1216	URxvt.keysym.Insert: <my insert key sequence>	1161	URxvt.keysym.Insert: <my insert key sequence>
1217	URxvt.keysym.S-Insert: builtin:	1162	URxvt.keysym.S-Insert: builtin:
1218		1163
1219	The first line defines a mapping for C<Insert> and I<any> combination	1164	The first line defines a mapping for C<Insert> and I<any> combination
1220	of modifiers. The second line re-establishes the default mapping for	1165	of modifiers. The second line re-establishes the default mapping for
1221	C<Shift-Insert>.	1166	C<Shift-Insert>.
1222		1167
1223	The following example will map Control-Meta-1 and Control-Meta-2 to	1168	=item builtin-string:
1224	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1225	font-switching at runtime:
1226		1169
1227	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1170	This action is mainly useful to restore string mappings for keys that
1228	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1171	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1172	difficult to explain - basically, this action will send the string to the
		1173	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1174	action for it.
1229		1175
1230	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1176	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1231	info):	1177	selection when you press C<Shift-Insert>. With the following bindings, it
		1178	would instead emit the (undocumented, but what applications running in the
		1179	terminal might expect) sequence C<ESC [ 2 $> instead:
1232		1180
1233	URxvt.keysym.M-C-3: command:\033[8;25;80t	1181	URxvt.keysym.S-Insert: builtin-string:
1234	URxvt.keysym.M-C-4: command:\033[8;48;110t	1182	URxvt.keysym.C-S-Insert: builtin:
		1183
		1184	The first line disables the paste functionality for that key
		1185	combination, and the second reinstates the default behaviour for
		1186	C<Control-Shift-Insert>, which would otherwise be overridden.
		1187
		1188	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1189	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1190	this:
		1191
		1192	URxvt.keysym.C-M-c: builtin-string:
		1193	URxvt.keysym.C-M-v: builtin-string:
		1194
		1195	=item EXTENSION:STRING
		1196
		1197	An action of this form invokes the action B<STRING>, if any, provided
		1198	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1199	be loaded automatically if necessary.
		1200
		1201	Not all extensions define actions, but popular extensions that do
		1202	include the I<selection> and I<matcher> extensions (documented in their
		1203	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1204	respectively).
		1205
		1206	From the silly examples department, this will rot13-"encrypt"
		1207	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1208	keyboards:
		1209
		1210	URxvt.keysym.M-C-c: selection:rot13
		1211
		1212	=item perl:STRING DEPRECATED
		1213
		1214	This is a deprecated way of invoking commands provided by perl
		1215	extensions. It is still supported, but should not be used anymore.
		1216
		1217	=back
1235		1218
1236	=item B<perl-ext-common>: I<string>	1219	=item B<perl-ext-common>: I<string>
1237		1220
1238	=item B<perl-ext>: I<string>	1221	=item B<perl-ext>: I<string>
1239		1222
…		…
1241	use in this terminal instance; option B<-pe>.	1224	use in this terminal instance; option B<-pe>.
1242		1225
1243	Extension names can be prefixed with a C<-> sign to prohibit using	1226	Extension names can be prefixed with a C<-> sign to prohibit using
1244	them. This can be useful to selectively disable some extensions loaded	1227	them. This can be useful to selectively disable some extensions loaded
1245	by default, or specified via the C<perl-ext-common> resource. For	1228	by default, or specified via the C<perl-ext-common> resource. For
1246	example, C<default,-selection> will use all the default extension except	1229	example, C<default,-selection> will use all the default extensions except
1247	C<selection>.	1230	C<selection>.
1248		1231
1249	Extension names can also be followed by an argument in angle brackets	1232	The default set includes the C<selection>, C<option-popup>,
1250	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1233	C<selection-popup> and C<readline> extensions, any extensions that
1251	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1234	define keybindings via C<BINDING> meta comments, and extensions which
1252	multiple times with different arguments will pass multiple arguments to	1235	are mentioned in B<keysym> resources.
1253	the extension.	1236
		1237	Any extension such that a corresponding resource is given on the
		1238	command line is automatically appended to B<perl-ext>.
1254		1239
1255	Each extension is looked up in the library directories, loaded if	1240	Each extension is looked up in the library directories, loaded if
1256	necessary, and bound to the current terminal instance.	1241	necessary, and bound to the current terminal instance. When the library
		1242	search path contains multiple extension files of the same name, then the
		1243	first one found will be used.
1257		1244
1258	If both of these resources are the empty string, then the perl	1245	If both of these resources are the empty string, then the perl interpreter
1259	interpreter will not be initialized. The idea behind two options is that	1246	will not be initialized. The rationale for having two options is that
1260	B<perl-ext-common> will be used for extensions that should be available to	1247	B<perl-ext-common> will be used for extensions that should be available to
1261	all instances, while B<perl-ext> is used for specific instances.	1248	all instances, while B<perl-ext> is used for specific instances.
1262		1249
1263	=item B<perl-eval>: I<string>	1250	=item B<perl-eval>: I<string>
1264		1251
…		…
1266	the @@RXVT_NAME@@perl(3) manpage.	1253	the @@RXVT_NAME@@perl(3) manpage.
1267		1254
1268	=item B<perl-lib>: I<path>	1255	=item B<perl-lib>: I<path>
1269		1256
1270	Colon-separated list of additional directories that hold extension	1257	Colon-separated list of additional directories that hold extension
1271	scripts. When looking for extensions specified by the C<perl> resource,	1258	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1272	@@RXVT_NAME@@ will first look in these directories and then in	1259	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1273	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1260	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1274		1261
1275	See the @@RXVT_NAME@@perl(3) manpage.	1262	See the @@RXVT_NAME@@perl(3) manpage.
1276		1263
1277	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1264	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1278		1265
…		…
1282	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1269	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1283		1270
1284	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1271	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1285	for details.	1272	for details.
1286		1273
1287	=item B<searchable-scrollback:> I<keysym>	1274	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1288		1275
1289	Sets the hotkey that starts the incremental scrollback buffer search	1276	This resource is deprecated and will be removed. Use a B<keysym> resource
1290	(default: C<M-s>).	1277	instead, e.g.:
1291		1278
		1279	URxvt.keysym.M-s: searchable-scrollback:start
		1280
1292	=item B<urlLauncher>: I<string>	1281	=item B<url-launcher>: I<string>
1293		1282
1294	Specifies the program to be started with a URL argument. Used by the	1283	Specifies the program to be started with a URL argument. Used by the
1295	C<selection-popup> and C<matcher> perl extensions.	1284	C<selection-popup> and C<matcher> perl extensions.
1296		1285
1297	=item B<transient-for>: I<windowid>	1286	=item B<transient-for>: I<windowid>
…		…
1308	Turn on/off ISO 14755 (default enabled).	1297	Turn on/off ISO 14755 (default enabled).
1309		1298
1310	=item B<iso14755_52:> I<boolean>	1299	=item B<iso14755_52:> I<boolean>
1311		1300
1312	Turn on/off ISO 14755 5.2 mode (default enabled).	1301	Turn on/off ISO 14755 5.2 mode (default enabled).
		1302
		1303	=back
		1304
		1305	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1306
		1307	=over 4
		1308
		1309	=item B<-pixmap> I<file[;oplist]>
		1310
		1311	=item B<backgroundPixmap:> I<file[;oplist]>
		1312
		1313	Compile I<pixbuf>: Use the specified image file as the window's
		1314	background and also optionally specify a colon separated list of
		1315	operations to modify it. Note that you may need to quote the C<;>
		1316	character when using the command line option, as C<;> is usually a
		1317	metacharacter in shells. Supported operations are:
		1318
		1319	=over 4
		1320
		1321	=item B<WxH+X+Y>
		1322
		1323	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1324	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1325	scale of 0 disables scaling.
		1326
		1327	=item B<op=tile>
		1328
		1329	enables tiling
		1330
		1331	=item B<op=keep-aspect>
		1332
		1333	maintain the image aspect ratio when scaling
		1334
		1335	=item B<op=root-align>
		1336
		1337	use the position of the terminal window relative to the root window as
		1338	the image offset, simulating a root window background
		1339
		1340	=back
		1341
		1342	The default scale and position setting is C<100x100+50+50>.
		1343	Alternatively, a predefined set of templates can be used to achieve
		1344	the most common setups:
		1345
		1346	=over 4
		1347
		1348	=item B<style=tiled>
		1349
		1350	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1351
		1352	=item B<style=aspect-stretched>
		1353
		1354	the image is scaled to fill the whole window maintaining the aspect
		1355	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1356
		1357	=item B<style=stretched>
		1358
		1359	the image is scaled to fill the whole window. Equivalent to 100x100
		1360
		1361	=item B<style=centered>
		1362
		1363	the image is centered with no scaling. Equivalent to 0x0+50+50
		1364
		1365	=item B<style=root-tiled>
		1366
		1367	the image is tiled with no scaling and using 'root' positioning.
		1368	Equivalent to 0x0:op=tile:op=root-align
		1369
		1370	=back
		1371
		1372	If multiple templates are specified the last one wins. Note that a
		1373	template overrides all the scale, position and operations settings.
		1374
		1375	If used in conjunction with pseudo-transparency, the specified pixmap
		1376	will be blended over the transparent background using alpha-blending.
		1377
		1378	=item B<-tr>\|B<+tr>
		1379
		1380	=item B<transparent:> I<boolean>
		1381
		1382	Turn on/off pseudo-transparency by using the root pixmap as background.
		1383
		1384	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1385	will be removed in future versions.
		1386
		1387	=item B<-tint> I<colour>
		1388
		1389	=item B<tintColor:> I<colour>
		1390
		1391	Tint the transparent background with the given colour. Note that a
		1392	black tint yields a completely black image while a white tint yields
		1393	the image unchanged.
		1394
		1395	=item B<-sh> I<number>
		1396
		1397	=item B<shading:> I<number>
		1398
		1399	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1400	A value of 100 means no shading.
		1401
		1402	=item B<-blr> I<HxV>
		1403
		1404	=item B<blurRadius:> I<HxV>
		1405
		1406	Apply gaussian blur with the specified radius to the transparent
		1407	background. If a single number is specified, the vertical and
		1408	horizontal radii are considered to be the same. Setting one of the
		1409	radii to 1 and the other to a large number creates interesting effects
		1410	on some backgrounds. The maximum radius value is 128. An horizontal or
		1411	vertical radius of 0 disables blurring.
		1412
		1413	=item B<path:> I<path>
		1414
		1415	Specify the colon-delimited search path for finding background image files.
1313		1416
1314	=back	1417	=back
1315		1418
1316	=head1 THE SCROLLBAR	1419	=head1 THE SCROLLBAR
1317		1420
…		…
1365	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1468	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1366	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1469	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1367		1470
1368	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1471	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1369	inserted too.	1472	inserted too.
		1473
		1474	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1475	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1476	binding causes the value of the internal selection to be copied to the
		1477	CLIPBOARD selection, while the second binding causes the value of the
		1478	CLIPBOARD selection to be inserted.
1370		1479
1371	=back	1480	=back
1372		1481
1373	=head1 CHANGING FONTS	1482	=head1 CHANGING FONTS
1374		1483
…		…
1459	on some systems or setgid to root or to some other group on others.	1568	on some systems or setgid to root or to some other group on others.
1460		1569
1461	=head1 COLOURS AND GRAPHICS	1570	=head1 COLOURS AND GRAPHICS
1462		1571
1463	In addition to the default foreground and background colours,	1572	In addition to the default foreground and background colours,
1464	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1573	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1465	high-intensity bold/blink versions of the same). Here is a list of the	1574	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1466	colours with their names.	1575	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1576	cube plus a 8 (24) colour greyscale ramp.
		1577
		1578	Here is a list of the ANSI colours with their names.
1467		1579
1468	=begin table	1580	=begin table
1469		1581
1470	B<color0> (black) = Black	1582	B<color0> (black) = Black
1471	B<color1> (red) = Red3	1583	B<color1> (red) = Red3
…		…
1491	It is also possible to specify the colour values of B<foreground>,	1603	It is also possible to specify the colour values of B<foreground>,
1492	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1604	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1493	a number 0-15, as a convenient shorthand to reference the colour name of	1605	a number 0-15, as a convenient shorthand to reference the colour name of
1494	color0-color15.	1606	color0-color15.
1495		1607
1496	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1608	The following text gives values for the standard 88 colour mode (and
1497	additional 72 colours. The first 64 of those (with indices 16 to 79)	1609	values for the 256 colour mode in parentheses).
1498	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1499	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1500		1610
		1611	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1612
		1613	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1614	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1615
		1616	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1617	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1618	the RGB cube.
		1619
1501	Together, all those colours implement the 88 colour xterm colours. Only	1620	Together, all those colours implement the 88 (256) colour xterm
1502	the first 16 can be changed using resources currently, the rest can only	1621	colours. Only the first 16 can be changed using resources currently, the
1503	be changed via command sequences ("escape codes").	1622	rest can only be changed via command sequences ("escape codes").
		1623
		1624	Applications are advised to use terminfo or command sequences to discover
		1625	number and RGB values of all colours (yes, you can query this...).
1504		1626
1505	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1627	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1506	always swapping the foreground/background colours. This is in contrast to	1628	always swapping the foreground/background colours. This is in contrast to
1507	I<xterm>(1) where the colours are only swapped if they have not otherwise	1629	I<xterm>(1) where the colours are only swapped if they have not otherwise
1508	been specified. For example,	1630	been specified. For example,
…		…
1513	White.	1635	White.
1514		1636
1515	=head2 ALPHA CHANNEL SUPPORT	1637	=head2 ALPHA CHANNEL SUPPORT
1516		1638
1517	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1639	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1518	their act together, rxvt-unicode will do it's own alpha channel management:	1640	their act together, rxvt-unicode will do its own alpha channel management:
1519		1641
1520	You can prefix any colour with an opaquenes percentage enclosed in	1642	You can prefix any colour with an opaqueness percentage enclosed in
1521	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1643	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1522	(0-100) that specifies the opacity of the colour, where C<0> is completely	1644	(0-100) that specifies the opacity of the colour, where C<0> is completely
1523	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1645	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1524	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1646	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1525	is the recommended format to specify transparency values, and works with	1647	is the recommended format to specify transparency values, and works with
…		…
1605		1727
1606	=item B<SHELL>	1728	=item B<SHELL>
1607		1729
1608	The shell to be used for command execution, defaults to C</bin/sh>.	1730	The shell to be used for command execution, defaults to C</bin/sh>.
1609		1731
1610	=item B<RXVT_SOCKET>	1732	=item B<RXVT_SOCKET> [I<sic>]
1611		1733
1612	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1734	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1613	@@RXVT_NAME@@d(1).	1735	@@RXVT_NAME@@d(1).
1614		1736
1615	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1737	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1738
		1739	=item B<URXVT_PERL_LIB>
		1740
		1741	Additional F<:>-separated library search path for perl extensions. Will be
		1742	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1743	directory.
		1744
		1745	=item B<URXVT_PERL_VERBOSITY>
		1746
		1747	See L<@@RXVT_NAME@@perl>(3).
1616		1748
1617	=item B<HOME>	1749	=item B<HOME>
1618		1750
1619	Used to locate the default directory for the unix domain socket for	1751	Used to locate the default directory for the unix domain socket for
1620	daemon communications and to locate various resource files (such as	1752	daemon communications and to locate various resource files (such as
1621	C<.Xdefaults>)	1753	C<.Xdefaults>)
1622		1754
1623	=item B<XAPPLRESDIR>	1755	=item B<XAPPLRESDIR>
1624		1756
1625	Directory where various X resource files are being located.	1757	Directory where application-specific X resource files are located.
1626		1758
1627	=item B<XENVIRONMENT>	1759	=item B<XENVIRONMENT>
1628		1760
1629	If set and accessible, gives the name of a X resource file to be loaded by	1761	If set and accessible, gives the name of a X resource file to be loaded by
1630	@@RXVT_NAME@@.	1762	@@RXVT_NAME@@.
…		…
1641		1773
1642	=back	1774	=back
1643		1775
1644	=head1 SEE ALSO	1776	=head1 SEE ALSO
1645		1777
		1778	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1646	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1779	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1647		1780
1648	=head1 CURRENT PROJECT COORDINATOR	1781	=head1 CURRENT PROJECT COORDINATOR
1649		1782
1650	=over 4	1783	=over 4
1651		1784
1652	=item Project Coordinator	1785	=item Project Coordinator
1653		1786
1654	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1787	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1655		1788
1656	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1789	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1657		1790
1658	=back	1791	=back
1659		1792
…		…
1663		1796
1664	=item John Bovey	1797	=item John Bovey
1665		1798
1666	University of Kent, 1992, wrote the original Xvt.	1799	University of Kent, 1992, wrote the original Xvt.
1667		1800
1668	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1801	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1669		1802
1670	very heavily modified Xvt and came up with Rxvt	1803	very heavily modified Xvt and came up with Rxvt
1671		1804
1672	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1805	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1673		1806
1674	wrote the Greek Keyboard Input (no longer in code)	1807	wrote the Greek Keyboard Input (no longer in code)
1675		1808
1676	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1809	=item mj olesen <olesen@me.QueensU.CA>
1677		1810
1678	Wrote the menu system.	1811	Wrote the menu system.
1679		1812
1680	Project Coordinator (changes.txt 2.11 to 2.21)	1813	Project Coordinator (changes.txt 2.11 to 2.21)
1681		1814
1682	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1815	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1683		1816
1684	Project Coordinator (changes.txt 2.21a to 2.4.5)	1817	Project Coordinator (changes.txt 2.21a to 2.4.5)
1685		1818
1686	=item Geoff Wing L<< <gcw@pobox.com> >>	1819	=item Geoff Wing <gcw@pobox.com>
1687		1820
1688	Rewrote screen display and text selection routines.	1821	Rewrote screen display and text selection routines.
1689		1822
1690	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1823	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1691		1824
1692	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1825	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1693		1826
1694	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1827	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1695	extension, random hacks, numerous bugfixes and extensions.	1828	extension, random hacks, numerous bugfixes and extensions.
1696		1829
1697	Project Coordinator (Changes 1.0 -)	1830	Project Coordinator (Changes 1.0 -)
1698		1831
1699	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1832	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1700		1833
1701	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1834	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1702		1835
1703	=back	1836	=back
1704		1837

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs. Revision 1.239 by sf-exg, Sun Oct 12 20:51:51 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs.
Revision 1.239 by sf-exg, Sun Oct 12 20:51:51 2014 UTC