[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs.
Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colours essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
357		311
358	=item B<-override-redirect>	312	=item B<-override-redirect>
359		313
360	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
361	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
362		321
363	=item B<-sbg>	322	=item B<-sbg>
364		323
365	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
366	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
421	=item B<-pt> I<style>	380	=item B<-pt> I<style>
422		381
423	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
424	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
425		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
426	=item B<-im> I<text>	388	=item B<-im> I<text>
427		389
428	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
429		391
430	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
571	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
572	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
573	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
574	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
575		537
576	1. system-wide app-defaults file, either locale-dependent OR global
577	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
578	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
579	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
580	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
581	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
582		544
583	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
584	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
700		662
701	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
702	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
703	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
704		666
705	=item B<transparent:> I<boolean>
706
707	Turn on/off illusion of a transparent window background.
708
709	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
710	future versions.
711
712	I<Please address all transparency related issues to Sasha Vasko at
713	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
714
715	=item B<fading:> I<number>	667	=item B<fading:> I<number>
716		668
717	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
718		670
719	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
720		672
721	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
722	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
723		675
724	=item B<tintColor:> I<colour>
725
726	Tint the transparent background pixmap with the given colour; option
727	B<-tint>.
728
729	=item B<shading:> I<number>
730
731	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
732	in addition to tinting it; option B<-sh>.
733
734	=item B<blendType:> I<string>
735
736	Specify background blending type; option B<-blt>.
737
738	=item B<blurRadius:> I<number>
739
740	Apply gaussian blur with the specified radius to the transparent
741	background image; option B<-blr>.
742
743	=item B<iconFile:> I<file>	676	=item B<iconFile:> I<file>
744		677
745	Set the application icon pixmap; option B<-icon>.	678	Set the application icon pixmap; option B<-icon>.
746		679
747	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
…		…
755		688
756	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
757		690
758	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
759	and the text.	692	and the text.
760
761	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
762
763	Use the specified image file for the background and also
764	optionally specify its scaling with a geometry string B<WxH+X+Y>,
765	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
766	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
767	centre (percent). A scale of 0 displays the image with tiling. A scale
768	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
769	an integer number of images in that direction. No image will be magnified
770	beyond 10 times its original size. The maximum permitted scale is 1000.
771	Additional operations can be specified after colon B<:op1:op2...>.
772	Supported operations are:
773
774	tile force background image to be tiled and not scaled. Equivalent to 0x0
775	propscale will scale image keeping proportions
776	auto will scale image to match window size. Equivalent to 100x100
777	hscale will scale image horizontally to the window size
778	vscale will scale image vertically to the window size
779	scale will scale image to match window size
780	root will tile image as if it was a root window background, auto-adjusting
781	whenever terminal window moves
782
783	If used in conjunction with B<-tr> option, the specified pixmap will be
784	blended over transparency image using either alpha-blending, or any
785	other blending type, specified with B<-blt "type"> option.
786
787	=item B<path:> I<path>
788
789	Specify the colon-delimited search path for finding background image files.
790		693
791	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
792		695
793	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
794	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
891		794
892	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
893	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
894	[default]; option B<+ls>.	797	[default]; option B<+ls>.
895		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
896	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
897		805
898	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
899	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
900	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
917	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
918		826
919	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
920	the author's favourite.	828	the author's favourite.
921		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
922	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
923		835
924	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
925	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
926		838
…		…
945	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
946	B<+si>.	858	B<+si>.
947		859
948	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
949		861
950	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
951	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
952	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
953		866
954	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
955		868
956	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
957	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
958	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
959	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
960		873
961	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
962		875
963	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
964	resource is limited on most machines to 65535; option B<-sl>.
965		877
966	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
967		879
968	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
969	option B<-b>.	881	option B<-b>.
…		…
1032		944
1033	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
1034		946
1035	Mouse pointer background colour.	947	Mouse pointer background colour.
1036		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
1037	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
1038		956
1039	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
1040	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
1041		959
1042	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
1043		961
1044	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
1045	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1046	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
1047	escape sequence.	965	escape sequence.
1048		966
1049	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
1050		968
…		…
1067		985
1068	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1069		987
1070	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
1071		989
1072	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1073		991
1074	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1075		993
1076	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1077		995
…		…
1146	Sets the working directory for the shell (or the command specified via	1064	Sets the working directory for the shell (or the command specified via
1147	B<-e>). The I<path> must be an absolute path and it must exist for	1065	B<-e>). The I<path> must be an absolute path and it must exist for
1148	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1149	directory will be used; option B<-cd>.	1067	directory will be used; option B<-cd>.
1150		1068
1151	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1152		1070
1153	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1154	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1155		1073
1156	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1157	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1158	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1159	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1160	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of the following full or
		1085	abbreviated modifier names:
		1086
		1087	=begin table
		1088
		1089	B<ISOLevel3> B<I>
		1090	B<AppKeypad> B<K>
		1091	B<Control> B<C>
		1092	B<NumLock> B<N>
		1093	B<Shift> B<S>
		1094	B<Meta> B<M> I<or> B<A>
		1095	B<Lock> B<L>
		1096	B<Mod1> B<1>
		1097	B<Mod2> B<2>
		1098	B<Mod3> B<3>
		1099	B<Mod4> B<4>
		1100	B<Mod5> B<5>
		1101
		1102	=end table
1161		1103
1162	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1104	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1163	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1105	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1164	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1106	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1165	current application keymap mode state.	1107	current application keymap mode state.
1166		1108
1167	The spellings of I<key> can be obtained by using B<xev>(1) command or	1109	Due the the large number of modifier combinations, a key mapping will
1168	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1110	match if I<at least> the specified identifiers are being set, and no other
		1111	key mappings with those and more bits are being defined. That means that
		1112	defining a mapping for C<a> will automatically provide definitions for
		1113	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1114	themselves. See the C<builtin:> action, below, for a way to work around
		1115	this when this is a problem.
		1116
		1117	The spelling of I<key> depends on your implementation of X. An easy way to
		1118	find a key name is to use the B<xev>(1) command. You can find a list by
		1119	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1169	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1120	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1170	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1121	value (B<0x0000 - 0xFFFF>).
1171	performed in an exact manner; however, the closest match is assured.
1172		1122
1173	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1123	As with any resource value, the I<action> string may contain backslash
		1124	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1174	number), see RESOURCES in C<man 7 X> for futher details.	1125	number), see RESOURCES in C<man 7 X> for further details.
1175		1126
1176	You can define a range of keysyms in one shot by providing a I<string>	1127	An action starts with an action prefix that selects a certain type
1177	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1128	of action, followed by a colon. An action string without colons is
		1129	interpreted as a literal string to pass to the tty (as if it was
		1130	prefixed with C<string:>).
		1131
		1132	The following action prefixes are known - extensions can provide
		1133	additional prefixes:
		1134
		1135	=over 4
		1136
		1137	=item string:STRING
		1138
		1139	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1140	then the remaining C<STRING> will be passed to the program running in the
		1141	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1142	string C<echo rm -rf /> followed by a newline:
		1143
		1144	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1145
		1146	This could in theory be used to completely redefine your keymap.
		1147
		1148	In addition, for actions of this type, you can define a range of
		1149	keysyms in one shot by loading the C<keysym-list> perl extension and
		1150	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1178	should be a character not used by the strings.	1151	the delimiter `/' should be a character not used by the strings.
1179		1152
1180	Its usage can be demonstrated by an example:	1153	Its usage can be demonstrated by an example:
1181		1154
1182	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1155	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1183		1156
1184	The above line is equivalent to the following three lines:	1157	The above line is equivalent to the following three lines:
1185		1158
1186	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1159	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1187	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1160	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1188	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1161	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1189		1162
		1163	=item command:STRING
		1164
1190	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1165	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1191	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1166	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1167	the opposite of C<string:> - instead of sending it to the program running
		1168	in the terminal, it will be treated as if it were program output). This is
		1169	most useful to feed command sequences into @@RXVT_NAME@@.
		1170
1192	example the following means "change the current locale to C<zh_CN.GBK>	1171	For example the following means "change the current locale to C<zh_CN.GBK>
1193	when Control-Meta-c is being pressed":	1172	when Control-Meta-c is being pressed":
1194		1173
1195	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1196		1175
1197	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1176	The following example will map Control-Meta-1 and Control-Meta-2 to
1198	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1177	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1199	manpage. For example, the F<selection> extension (activated via	1178	font-switching at runtime:
1200	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1201		1179
1202	URxvt.keysym.M-C-c: perl:selection:rot13	1180	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1181	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1203		1182
1204	Due the the large number of modifier combinations, a defined key mapping	1183	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1205	will match if at I<at least> the specified identifiers are being set, and	1184	info):
1206	no other key mappings with those and more bits are being defined. That
1207	means that defining a key map for C<a> will automatically provide
1208	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1209	mappings themselves.
1210		1185
1211	Unfortunately, this will override built-in key mappings. For example	1186	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1187	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1188
		1189	=item builtin:
		1190
		1191	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1192	key binding existed for the key combination. The obvious use is to undo
		1193	the effect of existing bindings. The not so obvious use is to reinstate
		1194	bindings when another binding overrides too many modifiers.
		1195
1212	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1196	For example if you overwrite the C<Insert> key you will disable
1213	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1197	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1214	user-defined keymap using the C<builtin:> replacement:	1198	"holes" into the user-defined keymap using the C<builtin:> replacement:
1215		1199
1216	URxvt.keysym.Insert: <my insert key sequence>	1200	URxvt.keysym.Insert: <my insert key sequence>
1217	URxvt.keysym.S-Insert: builtin:	1201	URxvt.keysym.S-Insert: builtin:
1218		1202
1219	The first line defines a mapping for C<Insert> and I<any> combination	1203	The first line defines a mapping for C<Insert> and I<any> combination
1220	of modifiers. The second line re-establishes the default mapping for	1204	of modifiers. The second line re-establishes the default mapping for
1221	C<Shift-Insert>.	1205	C<Shift-Insert>.
1222		1206
1223	The following example will map Control-Meta-1 and Control-Meta-2 to	1207	=item builtin-string:
1224	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1225	font-switching at runtime:
1226		1208
1227	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1209	This action is mainly useful to restore string mappings for keys that
1228	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1210	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1211	difficult to explain - basically, this action will send the string to the
		1212	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1213	action for it.
1229		1214
1230	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1215	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1231	info):	1216	selection when you press C<Shift-Insert>. With the following bindings, it
		1217	would instead emit the (undocumented, but what applications running in the
		1218	terminal might expect) sequence C<ESC [ 2 $> instead:
1232		1219
1233	URxvt.keysym.M-C-3: command:\033[8;25;80t	1220	URxvt.keysym.S-Insert: builtin-string:
1234	URxvt.keysym.M-C-4: command:\033[8;48;110t	1221	URxvt.keysym.C-S-Insert: builtin:
		1222
		1223	The first line disables the paste functionality for that key
		1224	combination, and the second reinstates the default behaviour for
		1225	C<Control-Shift-Insert>, which would otherwise be overridden.
		1226
		1227	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1228	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1229	this:
		1230
		1231	URxvt.keysym.C-M-c: builtin-string:
		1232	URxvt.keysym.C-M-v: builtin-string:
		1233
		1234	=item EXTENSION:STRING
		1235
		1236	An action of this form invokes the action B<STRING>, if any, provided
		1237	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1238	be loaded automatically if necessary.
		1239
		1240	Not all extensions define actions, but popular extensions that do
		1241	include the I<selection> and I<matcher> extensions (documented in their
		1242	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1243	respectively).
		1244
		1245	From the silly examples department, this will rot13-"encrypt"
		1246	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1247	keyboards:
		1248
		1249	URxvt.keysym.M-C-c: selection:rot13
		1250
		1251	=item perl:STRING DEPRECATED
		1252
		1253	This is a deprecated way of invoking commands provided by perl
		1254	extensions. It is still supported, but should not be used anymore.
		1255
		1256	=back
1235		1257
1236	=item B<perl-ext-common>: I<string>	1258	=item B<perl-ext-common>: I<string>
1237		1259
1238	=item B<perl-ext>: I<string>	1260	=item B<perl-ext>: I<string>
1239		1261
…		…
1241	use in this terminal instance; option B<-pe>.	1263	use in this terminal instance; option B<-pe>.
1242		1264
1243	Extension names can be prefixed with a C<-> sign to prohibit using	1265	Extension names can be prefixed with a C<-> sign to prohibit using
1244	them. This can be useful to selectively disable some extensions loaded	1266	them. This can be useful to selectively disable some extensions loaded
1245	by default, or specified via the C<perl-ext-common> resource. For	1267	by default, or specified via the C<perl-ext-common> resource. For
1246	example, C<default,-selection> will use all the default extension except	1268	example, C<default,-selection> will use all the default extensions except
1247	C<selection>.	1269	C<selection>.
1248		1270
1249	Extension names can also be followed by an argument in angle brackets	1271	The default set includes the C<selection>, C<option-popup>,
1250	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1272	C<selection-popup>, C<readline> and C<searchable-scrollback>
1251	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1273	extensions, and extensions which are mentioned in B<keysym> resources.
1252	multiple times with different arguments will pass multiple arguments to	1274
1253	the extension.	1275	Any extension such that a corresponding resource is given on the
		1276	command line is automatically appended to B<perl-ext>.
1254		1277
1255	Each extension is looked up in the library directories, loaded if	1278	Each extension is looked up in the library directories, loaded if
1256	necessary, and bound to the current terminal instance.	1279	necessary, and bound to the current terminal instance. When the library
		1280	search path contains multiple extension files of the same name, then the
		1281	first one found will be used.
1257		1282
1258	If both of these resources are the empty string, then the perl	1283	If both of these resources are the empty string, then the perl interpreter
1259	interpreter will not be initialized. The idea behind two options is that	1284	will not be initialized. The rationale for having two options is that
1260	B<perl-ext-common> will be used for extensions that should be available to	1285	B<perl-ext-common> will be used for extensions that should be available to
1261	all instances, while B<perl-ext> is used for specific instances.	1286	all instances, while B<perl-ext> is used for specific instances.
1262		1287
1263	=item B<perl-eval>: I<string>	1288	=item B<perl-eval>: I<string>
1264		1289
…		…
1266	the @@RXVT_NAME@@perl(3) manpage.	1291	the @@RXVT_NAME@@perl(3) manpage.
1267		1292
1268	=item B<perl-lib>: I<path>	1293	=item B<perl-lib>: I<path>
1269		1294
1270	Colon-separated list of additional directories that hold extension	1295	Colon-separated list of additional directories that hold extension
1271	scripts. When looking for extensions specified by the C<perl> resource,	1296	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1272	@@RXVT_NAME@@ will first look in these directories and then in	1297	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1273	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1298	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1274		1299
1275	See the @@RXVT_NAME@@perl(3) manpage.	1300	See the @@RXVT_NAME@@perl(3) manpage.
1276		1301
1277	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1302	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1278		1303
…		…
1282	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1307	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1283		1308
1284	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1309	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1285	for details.	1310	for details.
1286		1311
1287	=item B<searchable-scrollback:> I<keysym>	1312	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1288		1313
1289	Sets the hotkey that starts the incremental scrollback buffer search	1314	This resource is deprecated and will be removed. Use a B<keysym> resource
1290	(default: C<M-s>).	1315	instead, e.g.:
1291		1316
		1317	URxvt.keysym.M-s: searchable-scrollback:start
		1318
1292	=item B<urlLauncher>: I<string>	1319	=item B<url-launcher>: I<string>
1293		1320
1294	Specifies the program to be started with a URL argument. Used by the	1321	Specifies the program to be started with a URL argument. Used by the
1295	C<selection-popup> and C<matcher> perl extensions.	1322	C<selection-popup> and C<matcher> perl extensions.
1296		1323
1297	=item B<transient-for>: I<windowid>	1324	=item B<transient-for>: I<windowid>
…		…
1365	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1392	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1366	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1393	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1367		1394
1368	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1395	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1369	inserted too.	1396	inserted too.
		1397
		1398	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1399	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1400	binding causes the value of the internal selection to be copied to the
		1401	CLIPBOARD selection, while the second binding causes the value of the
		1402	CLIPBOARD selection to be inserted.
1370		1403
1371	=back	1404	=back
1372		1405
1373	=head1 CHANGING FONTS	1406	=head1 CHANGING FONTS
1374		1407
…		…
1459	on some systems or setgid to root or to some other group on others.	1492	on some systems or setgid to root or to some other group on others.
1460		1493
1461	=head1 COLOURS AND GRAPHICS	1494	=head1 COLOURS AND GRAPHICS
1462		1495
1463	In addition to the default foreground and background colours,	1496	In addition to the default foreground and background colours,
1464	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1497	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1465	high-intensity bold/blink versions of the same). Here is a list of the	1498	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1466	colours with their names.	1499	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1500	cube plus a 8 (24) colour greyscale ramp.
		1501
		1502	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1503	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1504	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1505	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1506	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1507	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1508	use many similar 24-bit colours. It's typically not a problem in common
		1509	scenarios.
		1510
		1511	Here is a list of the ANSI colours with their names.
1467		1512
1468	=begin table	1513	=begin table
1469		1514
1470	B<color0> (black) = Black	1515	B<color0> (black) = Black
1471	B<color1> (red) = Red3	1516	B<color1> (red) = Red3
…		…
1491	It is also possible to specify the colour values of B<foreground>,	1536	It is also possible to specify the colour values of B<foreground>,
1492	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1537	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1493	a number 0-15, as a convenient shorthand to reference the colour name of	1538	a number 0-15, as a convenient shorthand to reference the colour name of
1494	color0-color15.	1539	color0-color15.
1495		1540
1496	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1541	The following text gives values for the standard 88 colour mode (and
1497	additional 72 colours. The first 64 of those (with indices 16 to 79)	1542	values for the 256 colour mode in parentheses).
1498	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1499	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1500		1543
		1544	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1545
		1546	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1547	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1548
		1549	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1550	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1551	the RGB cube.
		1552
1501	Together, all those colours implement the 88 colour xterm colours. Only	1553	Together, all those colours implement the 88 (256) colour xterm
1502	the first 16 can be changed using resources currently, the rest can only	1554	colours. Only the first 16 can be changed using resources currently, the
1503	be changed via command sequences ("escape codes").	1555	rest can only be changed via command sequences ("escape codes").
		1556
		1557	Applications are advised to use terminfo or command sequences to discover
		1558	number and RGB values of all colours (yes, you can query this...).
1504		1559
1505	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1560	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1506	always swapping the foreground/background colours. This is in contrast to	1561	always swapping the foreground/background colours. This is in contrast to
1507	I<xterm>(1) where the colours are only swapped if they have not otherwise	1562	I<xterm>(1) where the colours are only swapped if they have not otherwise
1508	been specified. For example,	1563	been specified. For example,
…		…
1513	White.	1568	White.
1514		1569
1515	=head2 ALPHA CHANNEL SUPPORT	1570	=head2 ALPHA CHANNEL SUPPORT
1516		1571
1517	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1572	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1518	their act together, rxvt-unicode will do it's own alpha channel management:	1573	their act together, rxvt-unicode will do its own alpha channel management:
1519		1574
1520	You can prefix any colour with an opaquenes percentage enclosed in	1575	You can prefix any colour with an opaqueness percentage enclosed in
1521	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1576	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1522	(0-100) that specifies the opacity of the colour, where C<0> is completely	1577	(0-100) that specifies the opacity of the colour, where C<0> is completely
1523	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1578	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1524	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1579	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1525	is the recommended format to specify transparency values, and works with	1580	is the recommended format to specify transparency values, and works with
…		…
1605		1660
1606	=item B<SHELL>	1661	=item B<SHELL>
1607		1662
1608	The shell to be used for command execution, defaults to C</bin/sh>.	1663	The shell to be used for command execution, defaults to C</bin/sh>.
1609		1664
1610	=item B<RXVT_SOCKET>	1665	=item B<RXVT_SOCKET> [I<sic>]
1611		1666
1612	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1667	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1613	@@RXVT_NAME@@d(1).	1668	@@RXVT_NAME@@d(1).
1614		1669
1615	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1670	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1671
		1672	=item B<URXVT_PERL_LIB>
		1673
		1674	Additional F<:>-separated library search path for perl extensions. Will be
		1675	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1676	directory.
		1677
		1678	=item B<URXVT_PERL_VERBOSITY>
		1679
		1680	See L<@@RXVT_NAME@@perl>(3).
1616		1681
1617	=item B<HOME>	1682	=item B<HOME>
1618		1683
1619	Used to locate the default directory for the unix domain socket for	1684	Used to locate the default directory for the unix domain socket for
1620	daemon communications and to locate various resource files (such as	1685	daemon communications and to locate various resource files (such as
1621	C<.Xdefaults>)	1686	C<.Xdefaults>)
1622		1687
1623	=item B<XAPPLRESDIR>	1688	=item B<XAPPLRESDIR>
1624		1689
1625	Directory where various X resource files are being located.	1690	Directory where application-specific X resource files are located.
1626		1691
1627	=item B<XENVIRONMENT>	1692	=item B<XENVIRONMENT>
1628		1693
1629	If set and accessible, gives the name of a X resource file to be loaded by	1694	If set and accessible, gives the name of a X resource file to be loaded by
1630	@@RXVT_NAME@@.	1695	@@RXVT_NAME@@.
…		…
1641		1706
1642	=back	1707	=back
1643		1708
1644	=head1 SEE ALSO	1709	=head1 SEE ALSO
1645		1710
		1711	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1646	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1712	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1647		1713
1648	=head1 CURRENT PROJECT COORDINATOR	1714	=head1 CURRENT PROJECT COORDINATOR
1649		1715
1650	=over 4	1716	=over 4
1651		1717
1652	=item Project Coordinator	1718	=item Project Coordinator
1653		1719
1654	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1720	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1655		1721
1656	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1722	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1657		1723
1658	=back	1724	=back
1659		1725
…		…
1663		1729
1664	=item John Bovey	1730	=item John Bovey
1665		1731
1666	University of Kent, 1992, wrote the original Xvt.	1732	University of Kent, 1992, wrote the original Xvt.
1667		1733
1668	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1734	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1669		1735
1670	very heavily modified Xvt and came up with Rxvt	1736	very heavily modified Xvt and came up with Rxvt
1671		1737
1672	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1738	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1673		1739
1674	wrote the Greek Keyboard Input (no longer in code)	1740	wrote the Greek Keyboard Input (no longer in code)
1675		1741
1676	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1742	=item mj olesen <olesen@me.QueensU.CA>
1677		1743
1678	Wrote the menu system.	1744	Wrote the menu system.
1679		1745
1680	Project Coordinator (changes.txt 2.11 to 2.21)	1746	Project Coordinator (changes.txt 2.11 to 2.21)
1681		1747
1682	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1748	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1683		1749
1684	Project Coordinator (changes.txt 2.21a to 2.4.5)	1750	Project Coordinator (changes.txt 2.21a to 2.4.5)
1685		1751
1686	=item Geoff Wing L<< <gcw@pobox.com> >>	1752	=item Geoff Wing <gcw@pobox.com>
1687		1753
1688	Rewrote screen display and text selection routines.	1754	Rewrote screen display and text selection routines.
1689		1755
1690	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1756	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1691		1757
1692	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1758	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1693		1759
1694	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1760	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1695	extension, random hacks, numerous bugfixes and extensions.	1761	extension, random hacks, numerous bugfixes and extensions.
1696		1762
1697	Project Coordinator (Changes 1.0 -)	1763	Project Coordinator (Changes 1.0 -)
1698		1764
1699	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1765	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1700		1766
1701	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1767	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1702		1768
1703	=back	1769	=back
1704		1770

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs. Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.177 by root, Sun May 23 00:48:53 2010 UTC vs.
Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC