ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.12 by root, Mon Aug 16 02:09:28 2004 UTC vs.
Revision 1.248 by sf-exg, Fri Oct 13 17:13:58 2017 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
		20	=head1 FREQUENTLY ASKED QUESTIONS
		21
		22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
		23	frequently asked questions and answer to them and some common
		24	problems. That document is also accessible on the World-Wide-Web at
		25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
		26
17	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
18		28
19	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
20	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
21	world. Being a terminal emulator, however, some things are very difficult,	31	world. Being a terminal emulator, however, some things are very difficult,
22	especially cursive scripts such as arabic, vertically written scripts	32	especially cursive scripts such as arabic, vertically written scripts
23	like mongolian or scripts requiring extremely complex combining rules,	33	like mongolian or scripts requiring extremely complex combining rules,
24	like tibetan or devenagari. Don't expect pretty output when using these	34	like tibetan or devanagari. Don't expect pretty output when using these
25	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work	35	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work
26	fine, though. A somewhat difficult case are left-to-right scripts, such	36	fine, though. A somewhat difficult case are right-to-left scripts, such
27	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms	37	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms
28	belong into the application, not the terminal emulator (too many things --	38	belong in the application, not the terminal emulator (too many things --
29	such as cursor-movement while editing -- break othwerwise), but that might	39	such as cursor-movement while editing -- break otherwise), but that might
30	change.	40	change.
31		41
32	If you are looking for a terminal that supports more exotic scripts, let	42	If you are looking for a terminal that supports more exotic scripts, let
33	me recommend C<mlterm>, which is a very userfriendly, lean and clean	43	me recommend C<mlterm>, which is a very user friendly, lean and clean
34	terminal emulator. In fact, the reason rxvt-unicode was born was solely	44	terminal emulator. In fact, the reason rxvt-unicode was born was solely
35	because the author couldn't get C<mlterm> to use one font for latin1 and	45	because the author couldn't get C<mlterm> to use one font for latin1 and
36	another for japanese.	46	another for japanese.
37		47
38	Therefore another design rationale was the use of multiple fonts to	48	Therefore another design rationale was the use of multiple fonts to
39	display characters: The idea of a single unicode font which many other	49	display characters: The idea of a single unicode font which many other
40	programs force onto it's users never made sense to me: You should be able	50	programs force onto its users never made sense to me: You should be able
41	to choose any font for any script freely.	51	to choose any font for any script freely.
42		52
43	Apart from that, rxvt-unicode is also much better internationalised than	53	Apart from that, rxvt-unicode is also much better internationalised than
44	it's predecessor, supports things such as XFT and ISO 14755 that are handy	54	its predecessor, supports things such as XFT and ISO 14755 that are handy
45	in i18n-environments, is faster, and has a lot less bugs than the original	55	in i18n-environments, is faster, and has a lot bugs less than the original
46	rxvt. This all in addition to dozens of other small improvements.	56	rxvt. This all in addition to dozens of other small improvements.
47		57
48	It is still faithfully following the original rxvt idea of being lean	58	It is still faithfully following the original rxvt idea of being lean
49	and nice on resources: for example, you can still configure rxvt-unicode	59	and nice on resources: for example, you can still configure rxvt-unicode
50	without most of it's features to get a lean binary. It also comes with	60	without most of its features to get a lean binary. It also comes with
51	a client/daemon pair that lets you open any number of terminal windows	61	a client/daemon pair that lets you open any number of terminal windows
52	from within a single process, which makes startup time very fast and	62	from within a single process, which makes startup time very fast and
53	drastically reduces memory usage. See @@RXVT_NAME@@d(1) (daemon) and	63	drastically reduces memory usage. See @@RXVT_NAME@@d(1) (daemon) and
54	@@RXVT_NAME@@c(1) (client).	64	@@RXVT_NAME@@c(1) (client).
55		65
56	It also makes technical information about escape sequences (which have	66	It also makes technical information about escape sequences (which have
57	been extended) easier accessible: see @@RXVT_NAME@@(7) for technical	67	been extended) more accessible: see @@RXVT_NAME@@(7) for technical
58	reference documentation (escape sequences etc.) and the FAQ section at the	68	reference documentation (escape sequences etc.).
59	end of this document.
60		69
61	=head1 OPTIONS	70	=head1 OPTIONS
62		71
63	The B<@@RXVT_NAME@@> options (mostly a subset of I<xterm>'s) are listed	72	The B<@@RXVT_NAME@@> options (mostly a subset of I<xterm>'s) are listed
64	below. In keeping with the smaller-is-better philosophy, options may be	73	below. In keeping with the smaller-is-better philosophy, options may be
…		…
83		92
84	Print out a message describing available options.	93	Print out a message describing available options.
85		94
86	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
87		96
88	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
89	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
90	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
		100
		101	=item B<-depth> I<bitdepth>
		102
		103	Compile I<frills>: Attempt to find a visual with the given bit depth;
		104	resource B<depth>.
		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
91		116
92	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
93		118
94	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
95		120
…		…
97		122
98	Turn on/off simulated reverse video; resource B<reverseVideo>.	123	Turn on/off simulated reverse video; resource B<reverseVideo>.
99		124
100	=item B<-j>|B<+j>	125	=item B<-j>|B<+j>
101		126
102	Turn on/off jump scrolling; resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
103		128
104	=item B<-ip>|B<+ip>	129	=item B<-ss>|B<+ss>
105		130
106	Turn on/off inheriting parent window's pixmap. Alternative form is	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
107	B<-tr>; resource B<inheritPixmap>.
108		132
109	=item B<-fade> I<number>	133	=item B<-fade> I<number>
110		134
111	Fade the text by the given percentage when focus is lost.	135	Fade the text by the given percentage when focus is lost. Small values
		136	fade a little only, 100 completely replaces all colours by the fade
		137	colour; resource B<fading>.
112		138
113	=item B<-tint> I<colour>	139	=item B<-fadecolor> I<colour>
114		140
115	Tint the transparent background pixmap with the given colour when	141	Fade to this colour when fading is used (see B<-fade>). The default colour
116	transparency is enabled with B<-tr> or B<-ip>. See also the B<-sh>	142	is opaque black. resource B<fadeColor>.
117	option that can be used to brighten or darken the image in addition to
118	tinting it.
119		143
120	=item B<-sh>	144	=item B<-icon> I<file>
121		145
122	I<number> Darken (0 .. 100) or lighten (-1 .. -100) the transparent	146	Compile I<pixbuf>: Use the specified image as application icon. This
123	background image in addition to tinting it (i.e. B<-tint> must be	147	is used by many window managers, taskbars and pagers to represent the
124	specified, too).	148	application window; resource I<iconFile>.
125		149
126	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
127		151
128	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
129		153
130	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
131		155
132	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
133		157
134	=item B<-pixmap> I<file[;geom]>
135
136	Compile I<XPM>: Specify XPM file for the background and also optionally
137	specify its scaling with a geometry string. Note you may need to add
138	quotes to avoid special shell interpretation of the `;' in the
139	command-line; resource B<backgroundPixmap>.
140
141	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
142		159
143	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
144		161
145	=item B<-pr> I<colour>	162	=item B<-pr> I<colour>
…		…
150		167
151	The mouse pointer background colour; resource B<pointerColor2>.	168	The mouse pointer background colour; resource B<pointerColor2>.
152		169
153	=item B<-bd> I<colour>	170	=item B<-bd> I<colour>
154		171
155	The colour of the border between the xterm scrollbar and the text;	172	The colour of the border around the text area and between the scrollbar and the text;
156	resource B<borderColor>.	173	resource B<borderColor>.
157		174
158	=item B<-fn> I<fontname>	175	=item B<-fn> I<fontlist>
159		176
160	Select the fonts to be used. This is a comma seperated list of font	177	Select the fonts to be used. This is a comma separated list of font names
161	names that are used in turn when trying to display Unicode characters.	178	that are checked in order when trying to find glyphs for characters. The
162	The first font defines the cell size for characters; other fonts might	179	first font defines the cell size for characters; other fonts might be
163	be smaller, but not larger. A reasonable default font list is always	180	smaller, but not (in general) larger. A (hopefully) reasonable default
164	appended to it. resource B<font>.	181	font list is always appended to it. See resource B<font> for more details.
		182
		183	In short, to specify an X11 core font, just specify its name or prefix it
		184	with C<x:>. To specify an XFT-font, you need to prefix it with C<xft:>,
		185	e.g.:
		186
		187	@@RXVT_NAME@@ -fn "xft:Bitstream Vera Sans Mono:pixelsize=15"
		188	@@RXVT_NAME@@ -fn "9x15bold,xft:Bitstream Vera Sans Mono"
165		189
166	See also the question "How does rxvt-unicode choose fonts?" in the FAQ	190	See also the question "How does rxvt-unicode choose fonts?" in the FAQ
167	section.	191	section of @@RXVT_NAME@@(7).
168		192
		193	=item B<-fb> I<fontlist>
		194
		195	Compile I<font-styles>: The bold font list to use when B<bold> characters
		196	are to be printed. See resource B<boldFont> for details.
		197
		198	=item B<-fi> I<fontlist>
		199
		200	Compile I<font-styles>: The italic font list to use when I<italic>
		201	characters are to be printed. See resource B<italicFont> for details.
		202
		203	=item B<-fbi> I<fontlist>
		204
		205	Compile I<font-styles>: The bold italic font list to use when B<< I<bold
		206	italic> >> characters are to be printed. See resource B<boldItalicFont>
		207	for details.
		208
169	=item B<-rb>|B<+rb>	209	=item B<-is>|B<+is>
170		210
171	Enable "real bold" support. When this option is on, bold text will be	211	Compile I<font-styles>: Bold/Blink font styles imply high intensity
172	displayed using the first available bold font in the font list. Bold	212	foreground/background (default). See resource B<intensityStyles> for
173	fonts should thus be specified in the font list after their	213	details.
174	corresponding regular fonts. If no bold font can be found, a regular
175	font will be used. resource B<realBold>.
176		214
177	=item B<-name> I<name>	215	=item B<-name> I<name>
178		216
179	Specify the application name under which resources are to be obtained,	217	Specify the application name under which resources are to be obtained,
180	rather than the default executable file name. Name should not contain	218	rather than the default executable file name. Name should not contain
…		…
182		220
183	=item B<-ls>|B<+ls>	221	=item B<-ls>|B<+ls>
184		222
185	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
186		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
187	=item B<-ut>|B<+ut>	229	=item B<-ut>|B<+ut>
188		230
189	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
190	B<utmpInhibit>.	232	B<utmpInhibit>.
191		233
…		…
195	B<visualBell>.	237	B<visualBell>.
196		238
197	=item B<-sb>|B<+sb>	239	=item B<-sb>|B<+sb>
198		240
199	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
200		251
201	=item B<-si>|B<+si>	252	=item B<-si>|B<+si>
202		253
203	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
204	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
212		263
213	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
214	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
215	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
216		267
217	=item B<-sr>|B<+sr>
218
219	Put scrollbar on right/left; resource B<scrollBar_right>.
220
221	=item B<-st>|B<+st>	268	=item B<-ptab>|B<+ptab>
222		269
223	Display normal (non XTerm/NeXT) scrollbar without/with a trough;	270	If enabled (default), "Horizontal Tab" characters are being stored as
224	resource B<scrollBar_floating>.	271	actual wide characters in the screen buffer, which makes it possible to
		272	select and paste them. Since a horizontal tab is a cursor movement and
		273	not an actual glyph, this can sometimes be visually annoying as the cursor
		274	on a tab character is displayed as a wide cursor; resource B<pastableTabs>.
225		275
226	=item B<-bc>|B<+bc>	276	=item B<-bc>|B<+bc>
227		277
228	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
		279
		280	=item B<-uc>|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
229		283
230	=item B<-iconic>	284	=item B<-iconic>
231		285
232	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
233	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
…		…
250		304
251	=item B<-bl>	305	=item B<-bl>
252		306
253	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
254	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
255	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
		311
		312	=item B<-override-redirect>
		313
		314	Compile I<frills>: Sets override-redirect on the window; resource
		315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
		321
		322	=item B<-sbg>
		323
		324	Compile I<frills>: Disable the usage of the built-in block graphics/line
		325	drawing characters and just rely on what the specified fonts provide. Use
		326	this if you have a good font and want to use its block graphic glyphs;
		327	resource B<skipBuiltinGlyphs>.
256		328
257	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
258		330
259	Compile I<linespace>: Lines (pixel height) to insert between each row	331	Compile I<frills>: Lines (pixel height) to insert between each row of
260	of the display; resource B<linespace>.	332	the display. Useful to work around font rendering problems; resource
		333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
261		341
262	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
263		343
264	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
265	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
274	given on the command line. If this option is used, it must be the last	354	given on the command line. If this option is used, it must be the last
275	on the command-line. If there is no B<-e> option then the default is to	355	on the command-line. If there is no B<-e> option then the default is to
276	run the program specified by the B<SHELL> environment variable or,	356	run the program specified by the B<SHELL> environment variable or,
277	failing that, I<sh(1)>.	357	failing that, I<sh(1)>.
278		358
		359	Please note that you must specify a program with arguments. If you want to
		360	run shell commands, you have to specify the shell, like this:
		361
		362	@@RXVT_NAME@@ -e sh -c "shell commands"
		363
279	=item B<-title> I<text>	364	=item B<-title> I<text>
280		365
281	Window title (B<-T> still respected); the default title is the basename	366	Window title (B<-T> still respected); the default title is the basename
282	of the program specified after the B<-e> option, if any, otherwise the	367	of the program specified after the B<-e> option, if any, otherwise the
283	application name; resource B<title>.	368	application name; resource B<title>.
…		…
295	=item B<-pt> I<style>	380	=item B<-pt> I<style>
296		381
297	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
298	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
299		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
300	=item B<-im> I<text>	388	=item B<-im> I<text>
301		389
302	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
303		391
304	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
305		393
306	The locale to use for opening the IM. You can use an LC_CTYPE of e.g.	394	The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g.
307	de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input	395	C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the
308	extension to be able to input japanese characters while staying in	396	input extension to be able to input japanese characters while staying in
309	another locale.	397	another locale. resource B<imLocale>.
		398
		399	=item B<-imfont> I<fontset>
		400
		401	Set the font set to use for the X Input Method, see resource B<imFont>
		402	for more info.
		403
		404	=item B<-tcw>
		405
		406	Change the meaning of triple-click selection with the left mouse
		407	button. Only effective when the original (non-perl) selection code is
		408	in-use. Instead of selecting a full line it will extend the selection to
		409	the end of the logical line only. resource B<tripleclickwords>.
310		410
311	=item B<-insecure>	411	=item B<-insecure>
312		412
313	Enable "insecure" mode, which currently enables most of the escape	413	Enable "insecure" mode, which currently enables most of the escape
314	sequences that echo strings. See the resource B<insecure> for more	414	sequences that echo strings. See the resource B<insecure> for more
…		…
328	=item B<-ssr>|B<+ssr>	428	=item B<-ssr>|B<+ssr>
329		429
330	Turn on/off secondary screen scroll (default enabled); resource	430	Turn on/off secondary screen scroll (default enabled); resource
331	B<secondaryScroll>.	431	B<secondaryScroll>.
332		432
		433	=item B<-hold>|B<+hold>
		434
		435	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
		436	will not immediately destroy its window when the program executed within
		437	it exits. Instead, it will wait till it is being killed or closed by the
		438	user; resource B<hold>.
		439
		440	=item B<-cd> I<path>
		441
		442	Sets the working directory for the shell (or the command specified via
		443	B<-e>). The I<path> must be an absolute path and it must exist for
		444	@@RXVT_NAME@@ to start; resource B<chdir>.
		445
333	=item B<-xrm> I<resourcestring>	446	=item B<-xrm> I<string>
334		447
335	No effect on rxvt-unicode. Simply passes through an argument to be made	448	Works like the X Toolkit option of the same name, by adding the I<string>
336	available in the instance's argument list. Appears in I<WM_COMMAND> in	449	as if it were specified in a resource file. Resource values specified this
337	some window managers.	450	way take precedence over all other resource specifications.
		451
		452	Note that you need to use the I<same> syntax as in the .Xdefaults file,
		453	e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific
		454	options can be specified as long-options on the commandline, so use
		455	of B<-xrm> is mostly limited to cases where you want to specify other
		456	resources (e.g. for input methods) or for compatibility with other
		457	programs.
		458
		459	=item B<-keysym.>I<sym> I<string>
		460
		461	Remap a key symbol. See resource B<keysym>.
		462
		463	=item B<-embed> I<windowid>
		464
		465	Tells @@RXVT_NAME@@ to embed its windows into an already-existing window,
		466	which enables applications to easily embed a terminal.
		467
		468	Right now, @@RXVT_NAME@@ will first unmap/map the specified window, so it
		469	shouldn't be a top-level window. @@RXVT_NAME@@ will also reconfigure it
		470	quite a bit, so don't expect it to keep some specific state. It's best to
		471	create an extra subwindow for @@RXVT_NAME@@ and leave it alone.
		472
		473	The window will not be destroyed when @@RXVT_NAME@@ exits.
		474
		475	It might be useful to know that @@RXVT_NAME@@ will not close file
		476	descriptors passed to it (except for stdin/out/err, of course), so you
		477	can use file descriptors to communicate with the programs within the
		478	terminal. This works regardless of whether the C<-embed> option was used or
		479	not.
		480
		481	Here is a short Gtk2-perl snippet that illustrates how this option can be
		482	used (a longer example is in F<doc/embed>):
		483
		484	my $rxvt = new Gtk2::Socket;
		485	$rxvt->signal_connect_after (realize => sub {
		486	my $xid = $_[0]->window->get_xid;
		487	system "@@RXVT_NAME@@ -embed $xid &";
		488	});
		489
		490	=item B<-pty-fd> I<file descriptor>
		491
		492	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty
		493	pair but instead use the given file descriptor as the tty master. This is
		494	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator
		495	without having to run a program within it.
		496
		497	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
		498	entries and will not tinker with pty/tty permissions - you have to do that
		499	yourself if you want that.
		500
		501	As an extremely special case, specifying C<-1> will completely suppress
		502	pty/tty operations, which is probably only useful in conjunction with some
		503	perl extension that manages the terminal.
		504
		505	Here is a example in perl that illustrates how this option can be used (a
		506	longer example is in F<doc/pty-fd>):
		507
		508	use IO::Pty;
		509	use Fcntl;
		510
		511	my $pty = new IO::Pty;
		512	fcntl $pty, F_SETFD, 0; # clear close-on-exec
		513	system "@@RXVT_NAME@@ -pty-fd " . (fileno $pty) . "&";
		514	close $pty;
		515
		516	# now communicate with rxvt
		517	my $slave = $pty->slave;
		518	while (<$slave>) { print $slave "got <$_>\n" }
		519
		520	=item B<-pe> I<string>
		521
		522	Comma-separated list of perl extension scripts to use (or not to use) in
		523	this terminal instance. See resource B<perl-ext> for details.
338		524
339	=back	525	=back
340		526
341	=head1 RESOURCES (available also as long-options)	527	=head1 RESOURCES
342		528
343	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	529	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
344	options) compiled into your version.	530	options) compiled into your version. All resources are also available as
		531	long-options.
345		532
346	There are two different methods that @@RXVT_NAME@@ can use to get the	533	You can set and change the resources using X11 tools like B<xrdb>. Many
347	Xresource data: using the X libraries (Xrm*-functions) or internal	534	distribution do also load settings from the B<~/.Xresources> file when X
348	Xresources reader (B<~/.Xdefaults>). For the first method (ie.	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
349	B<@@RXVT_NAME@@ -h> lists B<XGetDefaults>), you can set and change the	536	with later settings overwriting earlier ones:
350	resources using X11 tools like B<xset>. Many distribution do also load
351	settings from the B<~/.Xresources> file when X starts.
352		537
353	If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h>	538	1. app-defaults file in $XAPPLRESDIR
354	lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults	539	2. $HOME/.Xdefaults
355	set in XAPPLOADDIR/URxvt (compile-time defined: usually	540	3. RESOURCE_MANAGER property on root-window of screen 0
356	B</usr/lib/X11/app-defaults/URxvt>) and resources set in	541	4. SCREEN_RESOURCES property on root-window of the current screen
357	B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist.	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
		543	6. resources specified via -xrm on the commandline
		544
358	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
359	class names: B<XTerm> and B<URxvt>. The class name B<Rxvt> allows	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
360	resources common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be	547	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
361	easily configured, while the class name B<URxvt> allows resources	548	configured, while the class name B<URxvt> allows resources unique to
362	unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be	549	B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@>
363	shared between different B<@@RXVT_NAME@@> configurations. If no	550	configurations. If no resources are specified, suitable defaults will
364	resources are specified, suitable defaults will be used. Command-line	551	be used. Command-line arguments can be used to override resource
365	arguments can be used to override resource settings. The following	552	settings. The following resources are supported (you might want to
366	resources are allowed:	553	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
		554	extensions not documented here):
367		555
368	=over 4	556	=over 4
		557
		558	=item B<depth:> I<bitdepth>
		559
		560	Compile I<xft>: Attempt to find a visual with the given bit depth;
		561	option B<-depth>.
		562
		563	=item B<buffered:> I<boolean>
		564
		565	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		566	On some card/driver combination enabling it slightly decreases
		567	performance, on most it greatly helps it. The slowdown is small, so it
		568	should normally be enabled.
369		569
370	=item B<geometry:> I<geom>	570	=item B<geometry:> I<geom>
371		571
372	Create the window with the specified X window geometry [default 80x24];	572	Create the window with the specified X window geometry [default 80x24];
373	option B<-geometry>.	573	option B<-geometry>.
…		…
387	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
388	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
389	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
390	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
391	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
392	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
		593
		594	Colours higher than 15 cannot be set using resources (yet), but can be
		595	changed using an escape command (see @@RXVT_NAME@@(7)).
		596
		597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
		598	88 colour support). Colours 80-87 are evenly spaces grey steps.
393		599
394	=item B<colorBD:> I<colour>	600	=item B<colorBD:> I<colour>
395		601
		602	=item B<colorIT:> I<colour>
		603
396	Use the specified colour to display bold characters when the foreground	604	Use the specified colour to display bold or italic characters when the
397	colour is the default. This option will be ignored if B<realBold> is	605	foreground colour is the default. If font styles are not available
398	enabled.	606	(Compile I<styles>) and this option is unset, reverse video is used instead.
399		607
400	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
401		609
402	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
403	foreground colour is the default.	611	foreground colour is the default.
404		612
405	=item B<colorRV:> I<colour>	613	=item B<underlineColor:> I<colour>
406		614
		615	If set, use the specified colour as the colour for the underline
		616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
407	Use the specified colour as the background for reverse video	620	If set, use the specified colour as the background for highlighted
408	characters.	621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
409		627
410	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
411		629
412	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
413	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
420		638
421	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
422		640
423	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
424	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
425	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
426		644
427	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
428		646
429	B<True>: specify that jump scrolling should be used. When scrolling	647	B<True>: specify that jump scrolling should be used. When receiving lots
430	quickly, fewer screen updates are performed [default]; option B<-j>.	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
		649	has been read, resulting in fewer updates while still displaying every
		650	received line; option B<-j>.
		651
431	B<False>: specify that smooth scrolling should be used; option B<+j>.	652	B<False>: specify that smooth scrolling should be used. @@RXVT_NAME@@ will
		653	force a screen refresh on each new line it received; option B<+j>.
432		654
433	=item B<inheritPixmap:> I<boolean>	655	=item B<skipScroll:> I<boolean>
434		656
435	B<True>: make the background inherit the parent windows' pixmap, giving	657	B<True>: (the default) specify that skip scrolling should be used. When
436	artificial transparency. B<False>: do not inherit the parent windows'	658	receiving lots of lines, @@RXVT_NAME@@ will only scroll once in a while
437	pixmap.	659	(around 60 times per second), resulting in far fewer updates. This can
		660	result in @@RXVT_NAME@@ not ever displaying some of the lines it receives;
		661	option B<-ss>.
		662
		663	B<False>: specify that everything is to be displayed, even
		664	if the refresh is too fast for the human eye to read anything (or the
		665	monitor to display anything); option B<+ss>.
438		666
439	=item B<fading:> I<number>	667	=item B<fading:> I<number>
440		668
441	Fade the text by the given percentage when focus is lost.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
442		670
443	=item B<tintColor:> I<colour>	671	=item B<fadeColor:> I<colour>
444		672
445	Tint the transparent background pixmap with the given colour.	673	Fade to this colour, when fading is used (see B<fading:>). The default
		674	colour is black; option B<-fadecolor>.
446		675
447	=item B<shading:> I<number>	676	=item B<iconFile:> I<file>
448		677
449	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background	678	Set the application icon pixmap; option B<-icon>.
450	image in addition to tinting it.
451
452	=item B<fading:> I<number>
453
454	Scale the tint colour by the given percentage.
455		679
456	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
457		681
458	Use the specified colour for the scrollbar [default #B2B2B2].	682	Use the specified colour for the scrollbar [default #B2B2B2].
459		683
460	=item B<troughColor:> I<colour>	684	=item B<troughColor:> I<colour>
461		685
462	Use the specified colour for the scrollbar's trough area [default	686	Use the specified colour for the scrollbar's trough area [default
463	#969696]. Only relevant for normal (non XTerm/NeXT) scrollbar.	687	#969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar.
464		688
465	=item B<backgroundPixmap:> I<file[;geom]>	689	=item B<borderColor:> I<colour>
466		690
467	Use the specified XPM file (note the `.xpm' extension is optional) for	691	The colour of the border around the text area and between the scrollbar
468	the background and also optionally specify its scaling with a geometry	692	and the text.
469	string B<WxH+X+Y>, in which B<"W" / "H"> specify the
470	horizontal/vertical scale (percent) and B<"X" / "Y"> locate the image
471	centre (percent). A scale of 0 displays the image with tiling. A scale
472	of 1 displays the image without any scaling. A scale of 2 to 9
473	specifies an integer number of images in that direction. No image will
474	be magnified beyond 10 times its original size. The maximum permitted
475	scale is 1000. [default 0x0+50+50]
476		693
477	=item B<menu:> I<file[;tag]>
478
479	Read in the specified menu file (note the `.menu' extension is
480	optional) and also optionally specify a starting tag to find. See the
481	reference documentation for details on the syntax for the menuBar.
482
483	=item B<path:> I<path>
484
485	Specify the colon-delimited search path for finding files (XPM and
486	menus), in addition to the paths specified by the B<RXVTPATH> and
487	B<PATH> environment variables.
488
489	=item B<font:> I<fontname>	694	=item B<font:> I<fontlist>
490		695
491	Select the fonts to be used. This is a comma seperated list of font	696	Select the fonts to be used. This is a comma separated list of font names
492	names that are used in turn when trying to display Unicode characters.	697	that are checked in order when trying to find glyphs for characters. The
493	The first font defines the cell size for characters; other fonts might	698	first font defines the cell size for characters; other fonts might be
494	be smaller, but not larger. A reasonable default font list is always	699	smaller, but not (in general) larger. A (hopefully) reasonable default
495	appended to it. option B<-fn>.	700	font list is always appended to it; option B<-fn>.
496		701
497	=item B<realBold:> I<boolean>	702	Each font can either be a standard X11 core font (XLFD) name, with
		703	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.
498		704
499	B<True>: Enable "real bold" support. When this option is on, bold text	705	In addition, each font can be prefixed with additional hints and
500	will be displayed using the first available bold font in the font list.	706	specifications enclosed in square brackets (C<[]>). The only available
501	Bold fonts should thus be specified in the font list after their	707	hint currently is C<codeset=codeset-name>, and this is only used for Xft
502	corresponding regular fonts. If no bold font can be found, a regular	708	fonts.
503	font will be used. option B<-rb>. B<False>: Display bold text in a
504	regular font, using the color specified with B<colorBD>; option B<+rb>.
505		709
506	=item B<selectstyle:> I<mode>	710	For example, this font resource
507		711
508	Set mouse selection style to B<old> which is 2.20, B<oldword> which is	712	URxvt.font: 9x15bold,\
509	xterm style with 2.20 old word selection, or anything else which gives	713	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
510	xterm style selection.	714	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
		715	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \
		716	xft:Code2000:antialias=false
511		717
512	=item B<scrollstyle:> I<mode>	718	specifies five fonts to be used. The first one is C<9x15bold> (actually
		719	the iso8859-1 version of the second font), which is the base font (because
		720	it is named first) and thus defines the character cell grid to be 9 pixels
		721	wide and 15 pixels high.
513		722
514	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	723	The second font is just used to add additional unicode characters not in
515	the author's favourite..	724	the base font, likewise the third, which is unfortunately non-bold, but
		725	the bold version of the font does contain fewer characters, so this is a
		726	useful supplement.
		727
		728	The third font is an Xft font with aliasing turned off, and the characters
		729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
		730	contains other characters, but we are not interested in them.
		731
		732	The last font is a useful catch-all font that supplies most of the
		733	remaining unicode characters.
		734
		735	=item B<boldFont:> I<fontlist>
		736
		737	=item B<italicFont:> I<fontlist>
		738
		739	=item B<boldItalicFont:> I<fontlist>
		740
		741	The font list to use for displaying B<bold>, I<italic> or B<< I<bold
		742	italic> >> characters, respectively.
		743
		744	If specified and non-empty, then the syntax is the same as for the
		745	B<font>-resource, and the given font list will be used as is, which makes
		746	it possible to substitute completely different font styles for bold and
		747	italic.
		748
		749	If unset (the default), a suitable font list will be synthesized by
		750	"morphing" the normal text font list into the desired shape. If that is
		751	not possible, replacement fonts of the desired shape will be tried.
		752
		753	If set, but empty, then this specific style is disabled and the normal
		754	text font will being used for the given style.
		755
		756	=item B<intensityStyles:> I<boolean>
		757
		758	When font styles are not enabled, or this option is enabled (B<True>,
		759	option B<-is>, the default), bold/blink font styles imply high
		760	intensity foreground/background colours. Disabling this option (B<False>,
		761	option B<+is>) disables this behaviour, the high intensity colours are not
		762	reachable.
516		763
517	=item B<title:> I<string>	764	=item B<title:> I<string>
518		765
519	Set window title string, the default title is the command-line	766	Set window title string, the default title is the command-line
520	specified after the B<-e> option, if any, otherwise the application	767	specified after the B<-e> option, if any, otherwise the application
…		…
529	=item B<mapAlert:> I<boolean>	776	=item B<mapAlert:> I<boolean>
530		777
531	B<True>: de-iconify (map) on receipt of a bell character. B<False>: no	778	B<True>: de-iconify (map) on receipt of a bell character. B<False>: no
532	de-iconify (map) on receipt of a bell character [default].	779	de-iconify (map) on receipt of a bell character [default].
533		780
		781	=item B<urgentOnBell:> I<boolean>
		782
		783	B<True>: set the urgency hint for the wm on receipt of a bell character.
		784	B<False>: do not set the urgency hint [default].
		785
		786	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		787
534	=item B<visualBell:> I<boolean>	788	=item B<visualBell:> I<boolean>
535		789
536	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	790	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
537	B<False>: no visual bell [default]; option B<+vb>.	791	B<False>: no visual bell [default]; option B<+vb>.
538		792
…		…
540		794
541	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
542	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
543	[default]; option B<+ls>.	797	[default]; option B<+ls>.
544		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
545	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
546		805
547	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
548	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
549	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
552		811
553	Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use	812	Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use
554	B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or	813	B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or
555	B<Shift-Print> to include the scrollback as well.	814	B<Shift-Print> to include the scrollback as well.
556		815
		816	The string will be interpreted as if typed into the shell as-is.
		817
		818	Example:
		819
		820	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
		821
		822	This creates a new file in your home directory with the screen contents
		823	every time you hit C<Print>.
		824
		825	=item B<scrollstyle:> I<mode>
		826
		827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		828	the author's favourite.
		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
557	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
558		835
559	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
560	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
561		838
…		…
580	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
581	B<+si>.	858	B<+si>.
582		859
583	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
584		861
585	B<True>: scroll with scrollback buffer when tty recieves new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
586	B<scrollTtyOutput> is False); option B<+sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
587	with scrollback buffer when tty recieves new lines; option B<-sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
588		866
589	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
590		868
591	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
592	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
593	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
594	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
595		873
596	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
597		875
598	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
599	resource is limited on most machines to 65535; option B<-sl>.
600		877
601	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
602		879
603	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
604	option B<-b>.	881	option B<-b>.
…		…
611	=item B<borderLess:> I<boolean>	888	=item B<borderLess:> I<boolean>
612		889
613	Set MWM hints to request a borderless window, i.e. if honoured by the	890	Set MWM hints to request a borderless window, i.e. if honoured by the
614	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.	891	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.
615		892
		893	=item B<skipBuiltinGlyphs:> I<boolean>
		894
		895	Compile I<frills>: Disable the usage of the built-in block graphics/line
		896	drawing characters and just rely on what the specified fonts provide. Use
		897	this if you have a good font and want to use its block graphic glyphs;
		898	option B<-sbg>.
		899
616	=item B<termName:> I<termname>	900	=item B<termName:> I<termname>
617		901
618	Specifies the terminal type name to be set in the B<TERM> environment	902	Specifies the terminal type name to be set in the B<TERM> environment
619	variable; option B<-tn>.	903	variable; option B<-tn>.
620		904
621	=item B<linespace:> I<number>	905	=item B<lineSpace:> I<number>
622		906
623	Specifies number of lines (pixel height) to insert between each row of	907	Specifies number of lines (pixel height) to insert between each row of
624	the display [default 0]; option B<-lsp>.	908	the display [default 0]; option B<-lsp>.
625		909
626	=item B<meta8:> I<boolean>	910	=item B<meta8:> I<boolean>
…		…
631	=item B<mouseWheelScrollPage:> I<boolean>	915	=item B<mouseWheelScrollPage:> I<boolean>
632		916
633	B<True>: the mouse wheel scrolls a page full. B<False>: the mouse wheel	917	B<True>: the mouse wheel scrolls a page full. B<False>: the mouse wheel
634	scrolls five lines [default].	918	scrolls five lines [default].
635		919
		920	=item B<pastableTabs:> I<boolean>
		921
		922	B<True>: store tabs as wide characters. B<False>: interpret tabs as cursor
		923	movement only; option C<-ptab>.
		924
636	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
637		926
638	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
639	option B<-bc>.	928	option B<-bc>.
		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
640		934
641	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
642		936
643	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
644	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
…		…
650		944
651	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
652		946
653	Mouse pointer background colour.	947	Mouse pointer background colour.
654		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
655	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
656		956
657	Specifies number of seconds before blanking the pointer [default 2].	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
		958	large number (e.g. C<987654321>) to effectively disable the timeout.
658		959
659	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
660		961
661	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
662	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
663	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
664	escape sequence.	965	escape sequence.
665		966
666	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
667		968
…		…
669	pressed. If unset it will send the sequence traditionally associated	970	pressed. If unset it will send the sequence traditionally associated
670	with the B<Execute> key.	971	with the B<Execute> key.
671		972
672	=item B<cutchars:> I<string>	973	=item B<cutchars:> I<string>
673		974
674	The characters used as delimiters for double-click word selection. The	975	The characters used as delimiters for double-click word selection
675	built-in default:	976	(whitespace delimiting is added automatically if resource is given).
676		977
		978	When the perl selection extension is in use (the default if compiled
		979	in, see the @@RXVT_NAME@@perl(3) manpage), a suitable regex using these
		980	characters will be created (if the resource exists, otherwise, no regex
		981	will be created). In this mode, characters outside ISO-8859-1 can be used.
		982
		983	When the selection extension is not used, only ISO-8859-1 characters can
		984	be used. If not specified, the built-in default is used:
		985
677	B<< BACKSLASH `"'&()*,;<=>?@[]{|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
678		987
679	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
680		989
681	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
682		991
683	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
684		993
685	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
686		995
687	=item B<imLocale:> I<name>	996	=item B<imLocale:> I<name>
688		997
689	The locale to use for opening the IM. You can use an LC_CTYPE of e.g.	998	The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g.
690	de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input	999	C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the
691	extension to be able to input japanese characters while staying in	1000	input extension to be able to input japanese characters while staying in
692	another locale. option B<-imlocale>.	1001	another locale; option B<-imlocale>.
693		1002
694	=item B<insecure>	1003	=item B<imFont:> I<fontset>
		1004
		1005	Specify the font-set used for XIM styles C<OverTheSpot> or
		1006	C<OffTheSpot>. It must be a standard X font set (XLFD patterns separated
		1007	by commas), i.e. it's not in the same format as the other font lists used
		1008	in @@RXVT_NAME@@. The default will be set-up to chose *any* suitable found
		1009	found, preferably one or two pixels differing in size to the base font.
		1010	option B<-imfont>.
		1011
		1012	=item B<tripleclickwords:> I<boolean>
		1013
		1014	Change the meaning of triple-click selection with the left mouse
		1015	button. Instead of selecting a full line it will extend the selection to
		1016	the end of the logical line only; option B<-tcw>.
		1017
		1018	=item B<insecure:> I<boolean>
695		1019
696	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1020	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that
697	echo arbitrary strings like the icon name or the locale. This could be	1021	echo arbitrary strings like the icon name or the locale. This could be
698	abused if somebody gets 8-bit-clean access to your display, wether	1022	abused if somebody gets 8-bit-clean access to your display, whether
699	throuh a mail client displaying mail bodies unfiltered or though	1023	through a mail client displaying mail bodies unfiltered or through
700	write(1). Therefore, these sequences are disabled by default. (Note	1024	write(1) or any other means. Therefore, these sequences are disabled by
701	that other terminals, including xterm, have these sequences	1025	default. (Note that many other terminals, including xterm, have these
702	enabled by default). You can enable them by setting this boolean	1026	sequences enabled by default, which doesn't make it safer, though).
703	resource or specifying B<-insecure> as an option. At the moment, this	1027
704	enabled display-answer, locale, findfont, icon label and window title	1028	You can enable them by setting this boolean resource or specifying
705	requests as well as dynamic menubar dispatch.	1029	B<-insecure> as an option. At the moment, this enables display-answer,
		1030	locale, findfont, icon label and window title requests.
706		1031
707	=item B<modifier:> I<modifier>	1032	=item B<modifier:> I<modifier>
708		1033
709	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,	1034	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,
710	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option	1035	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option
…		…
714		1039
715	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)	1040	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)
716	character is passed through. It may contain escape values as described	1041	character is passed through. It may contain escape values as described
717	in the entry on B<keysym> following.	1042	in the entry on B<keysym> following.
718		1043
719	=item B<secondaryScreen:> I<bool>	1044	=item B<secondaryScreen:> I<boolean>
720		1045
721	Turn on/off secondary screen (default enabled).	1046	Turn on/off secondary screen (default enabled).
722		1047
723	=item B<secondaryScroll:> I<bool>	1048	=item B<secondaryScroll:> I<boolean>
724		1049
725	Turn on/off secondary screen scroll (default enabled). If the this	1050	Turn on/off secondary screen scroll (default enabled). If this
726	option is enabled, scrolls on the secondary screen will change the	1051	option is enabled, scrolls on the secondary screen will change the
727	scrollback buffer and switching to/from the secondary screen will	1052	scrollback buffer and, when secondaryScreen is off, switching
728	instead scroll the screen up.	1053	to/from the secondary screen will instead scroll the screen up.
729		1054
		1055	=item B<hold>: I<boolean>
		1056
		1057	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
		1058	will not immediately destroy its window when the program executed within
		1059	it exits. Instead, it will wait till it is being killed or closed by the
		1060	user.
		1061
		1062	=item B<chdir>: I<path>
		1063
		1064	Sets the working directory for the shell (or the command specified via
		1065	B<-e>). The I<path> must be an absolute path and it must exist for
		1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1067	directory will be used; option B<-cd>.
		1068
730	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
731		1070
732	Associate I<string> with keysym I<sym> (B<0xFF00 - 0xFFFF>). It may	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
733	contain escape values (\a: bell, \b: backspace, \e, \E: escape, \n:	1072	resource name B<keysym.> cannot be omitted.
734	newline, \r: return, \t:	1073
735	tab, \000: octal number) or control characters (^?: delete, ^@: null,	1074	Using this resource, you can map key combinations such as
736	^A ...) and may enclosed with double quotes so that it can start or end	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
737	with whitespace. The intervening resource name B<keysym.> cannot be	1076	string than would normally result from that combination, making the
738	omitted. This resource is only available when compiled with	1077	terminal scroll up or down the way you want it, or any other thing an
739	KEYSYM_RESOURCE.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of the following full or
		1085	abbreviated modifier names:
		1086
		1087	=begin table
		1088
		1089	B<ISOLevel3> B<I>
		1090	B<AppKeypad> B<K>
		1091	B<Control> B<C>
		1092	B<NumLock> B<N>
		1093	B<Shift> B<S>
		1094	B<Meta> B<M> B<A>
		1095	B<Lock> B<L>
		1096	B<Mod1> B<1>
		1097	B<Mod2> B<2>
		1098	B<Mod3> B<3>
		1099	B<Mod4> B<4>
		1100	B<Mod5> B<5>
		1101
		1102	=end table
		1103
		1104	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
		1105	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
		1106	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
		1107	current application keymap mode state.
		1108
		1109	Due the the large number of modifier combinations, a key mapping will
		1110	match if I<at least> the specified identifiers are being set, and no other
		1111	key mappings with those and more bits are being defined. That means that
		1112	defining a mapping for C<a> will automatically provide definitions for
		1113	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1114	themselves. See the C<builtin:> action, below, for a way to work around
		1115	this when this is a problem.
		1116
		1117	The spelling of I<key> depends on your implementation of X. An easy way to
		1118	find a key name is to use the B<xev>(1) command. You can find a list by
		1119	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
		1120	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
		1121	value (B<0x0000 - 0xFFFF>).
		1122
		1123	As with any resource value, the I<action> string may contain backslash
		1124	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
		1125	number), see RESOURCES in C<man 7 X> for further details.
		1126
		1127	An action starts with an action prefix that selects a certain type
		1128	of action, followed by a colon. An action string without colons is
		1129	interpreted as a literal string to pass to the tty (as if it was
		1130	prefixed with C<string:>).
		1131
		1132	The following action prefixes are known - extensions can provide
		1133	additional prefixes:
		1134
		1135	=over 4
		1136
		1137	=item string:STRING
		1138
		1139	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1140	then the remaining C<STRING> will be passed to the program running in the
		1141	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1142	string C<echo rm -rf /> followed by a newline:
		1143
		1144	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1145
		1146	This could in theory be used to completely redefine your keymap.
		1147
		1148	In addition, for actions of this type, you can define a range of
		1149	keysyms in one shot by loading the C<keysym-list> perl extension and
		1150	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
		1151	the delimiter `/' should be a character not used by the strings.
		1152
		1153	Its usage can be demonstrated by an example:
		1154
		1155	URxvt.keysym.M-C-0x61: list|\033<|abc|>
		1156
		1157	The above line is equivalent to the following three lines:
		1158
		1159	URxvt.keysym.Meta-Control-0x61: string:\033<a>
		1160	URxvt.keysym.Meta-Control-0x62: string:\033<b>
		1161	URxvt.keysym.Meta-Control-0x63: string:\033<c>
		1162
		1163	=item command:STRING
		1164
		1165	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
		1166	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1167	the opposite of C<string:> - instead of sending it to the program running
		1168	in the terminal, it will be treated as if it were program output). This is
		1169	most useful to feed command sequences into @@RXVT_NAME@@.
		1170
		1171	For example the following means "change the current locale to C<zh_CN.GBK>
		1172	when Control-Meta-c is being pressed":
		1173
		1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
		1175
		1176	The following example will map Control-Meta-1 and Control-Meta-2 to
		1177	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
		1178	font-switching at runtime:
		1179
		1180	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1181	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
		1182
		1183	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
		1184	info):
		1185
		1186	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1187	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1188
		1189	=item builtin:
		1190
		1191	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1192	key binding existed for the key combination. The obvious use is to undo
		1193	the effect of existing bindings. The not so obvious use is to reinstate
		1194	bindings when another binding overrides too many modifiers.
		1195
		1196	For example if you overwrite the C<Insert> key you will disable
		1197	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
		1198	"holes" into the user-defined keymap using the C<builtin:> replacement:
		1199
		1200	URxvt.keysym.Insert: <my insert key sequence>
		1201	URxvt.keysym.S-Insert: builtin:
		1202
		1203	The first line defines a mapping for C<Insert> and I<any> combination
		1204	of modifiers. The second line re-establishes the default mapping for
		1205	C<Shift-Insert>.
		1206
		1207	=item builtin-string:
		1208
		1209	This action is mainly useful to restore string mappings for keys that
		1210	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1211	difficult to explain - basically, this action will send the string to the
		1212	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1213	action for it.
		1214
		1215	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
		1216	selection when you press C<Shift-Insert>. With the following bindings, it
		1217	would instead emit the (undocumented, but what applications running in the
		1218	terminal might expect) sequence C<ESC [ 2 $> instead:
		1219
		1220	URxvt.keysym.S-Insert: builtin-string:
		1221	URxvt.keysym.C-S-Insert: builtin:
		1222
		1223	The first line disables the paste functionality for that key
		1224	combination, and the second reinstates the default behaviour for
		1225	C<Control-Shift-Insert>, which would otherwise be overridden.
		1226
		1227	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1228	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1229	this:
		1230
		1231	URxvt.keysym.C-M-c: builtin-string:
		1232	URxvt.keysym.C-M-v: builtin-string:
		1233
		1234	=item EXTENSION:STRING
		1235
		1236	An action of this form invokes the action B<STRING>, if any, provided
		1237	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1238	be loaded automatically if necessary.
		1239
		1240	Not all extensions define actions, but popular extensions that do
		1241	include the I<selection> and I<matcher> extensions (documented in their
		1242	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1243	respectively).
		1244
		1245	From the silly examples department, this will rot13-"encrypt"
		1246	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1247	keyboards:
		1248
		1249	URxvt.keysym.M-C-c: selection:rot13
		1250
		1251	=item perl:STRING *DEPRECATED*
		1252
		1253	This is a deprecated way of invoking commands provided by perl
		1254	extensions. It is still supported, but should not be used anymore.
		1255
		1256	=back
		1257
		1258	=item B<perl-ext-common>: I<string>
		1259
		1260	=item B<perl-ext>: I<string>
		1261
		1262	Comma-separated list(s) of perl extension scripts (default: C<default>) to
		1263	use in this terminal instance; option B<-pe>.
		1264
		1265	Extension names can be prefixed with a C<-> sign to prohibit using
		1266	them. This can be useful to selectively disable some extensions loaded
		1267	by default, or specified via the C<perl-ext-common> resource. For
		1268	example, C<default,-selection> will use all the default extensions except
		1269	C<selection>.
		1270
		1271	The default set includes the C<selection>, C<option-popup>,
		1272	C<selection-popup>, C<readline> and C<searchable-scrollback>
		1273	extensions, and extensions which are mentioned in B<keysym> resources.
		1274
		1275	Any extension such that a corresponding resource is given on the
		1276	command line is automatically appended to B<perl-ext>.
		1277
		1278	Each extension is looked up in the library directories, loaded if
		1279	necessary, and bound to the current terminal instance. When the library
		1280	search path contains multiple extension files of the same name, then the
		1281	first one found will be used.
		1282
		1283	If both of these resources are the empty string, then the perl interpreter
		1284	will not be initialized. The rationale for having two options is that
		1285	B<perl-ext-common> will be used for extensions that should be available to
		1286	all instances, while B<perl-ext> is used for specific instances.
		1287
		1288	=item B<perl-eval>: I<string>
		1289
		1290	Perl code to be evaluated when all extensions have been registered. See
		1291	the @@RXVT_NAME@@perl(3) manpage.
		1292
		1293	=item B<perl-lib>: I<path>
		1294
		1295	Colon-separated list of additional directories that hold extension
		1296	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
		1297	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
		1298	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
		1299
		1300	See the @@RXVT_NAME@@perl(3) manpage.
		1301
		1302	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
		1303
		1304	Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for
		1305	details.
		1306
		1307	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
		1308
		1309	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
		1310	for details.
		1311
		1312	=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
		1313
		1314	This resource is deprecated and will be removed. Use a B<keysym> resource
		1315	instead, e.g.:
		1316
		1317	URxvt.keysym.M-s: searchable-scrollback:start
		1318
		1319	=item B<url-launcher>: I<string>
		1320
		1321	Specifies the program to be started with a URL argument. Used by the
		1322	C<selection-popup> and C<matcher> perl extensions.
		1323
		1324	=item B<transient-for>: I<windowid>
		1325
		1326	Compile I<frills>: Sets the WM_TRANSIENT_FOR property to the given window id.
		1327
		1328	=item B<override-redirect>: I<boolean>
		1329
		1330	Compile I<frills>: Sets override-redirect for the terminal window, making
		1331	it almost invisible to window managers; option B<-override-redirect>.
		1332
		1333	=item B<iso14755:> I<boolean>
		1334
		1335	Turn on/off ISO 14755 (default enabled).
		1336
		1337	=item B<iso14755_52:> I<boolean>
		1338
		1339	Turn on/off ISO 14755 5.2 mode (default enabled).
740		1340
741	=back	1341	=back
742		1342
743	=head1 THE SCROLLBAR	1343	=head1 THE SCROLLBAR
744		1344
…		…
758	the normal text selection/insertion, hold either the Shift or the Meta	1358	the normal text selection/insertion, hold either the Shift or the Meta
759	(Alt) key while performing the desired mouse action.	1359	(Alt) key while performing the desired mouse action.
760		1360
761	If mouse reporting mode is active, the normal scrollbar actions are	1361	If mouse reporting mode is active, the normal scrollbar actions are
762	disabled -- on the assumption that we are using a fullscreen	1362	disabled -- on the assumption that we are using a fullscreen
763	application. Instead, pressing Button1 and Button3 sends B<ESC[6~>	1363	application. Instead, pressing Button1 and Button3 sends B<ESC [ 6 ~>
764	(Next) and B<ESC[5~> (Prior), respectively. Similarly, clicking on the	1364	(Next) and B<ESC [ 5 ~> (Prior), respectively. Similarly, clicking on the
765	up and down arrows sends B<ESC[A> (Up) and B<ESC[B> (Down),	1365	up and down arrows sends B<ESC [ A> (Up) and B<ESC [ B> (Down),
766	respectively.	1366	respectively.
767		1367
768	=head1 TEXT SELECTION AND INSERTION	1368	=head1 THE SELECTION: SELECTING AND PASTING TEXT
769		1369
770	The behaviour of text selection and insertion mechanism is similar to	1370	The behaviour of text selection and insertion/pasting mechanism is similar
771	I<xterm>(1).	1371	to I<xterm>(1).
772		1372
773	=over 4	1373	=over 4
774		1374
775	=item B<Selection>:	1375	=item B<Selecting>:
776		1376
777	Left click at the beginning of the region, drag to the end of the	1377	Left click at the beginning of the region, drag to the end of the region
778	region and release; Right click to extend the marked region; Left	1378	and release; Right click to extend the marked region; Left double-click
779	double-click to select a word; Left triple-click to select the entire	1379	to select a word; Left triple-click to select the entire logical line
780	line.	1380	(which can span multiple screen lines), unless modified by resource
		1381	B<tripleclickwords>.
781		1382
		1383	Starting a selection while pressing the B<Meta> key (or B<Meta+Ctrl> keys)
		1384	(Compile: I<frills>) will create a rectangular selection instead of a
		1385	normal one. In this mode, every selected row becomes its own line in the
		1386	selection, and trailing whitespace is visually underlined and removed from
		1387	the selection.
		1388
782	=item B<Insertion>:	1389	=item B<Pasting>:
783		1390
784	Pressing and releasing the Middle mouse button (or B<Shift-Insert>) in	1391	Pressing and releasing the Middle mouse button in an B<@@RXVT_NAME@@>
785	an B<@@RXVT_NAME@@> window causes the current text selection to be	1392	window causes the value of the PRIMARY selection (or CLIPBOARD with the
786	inserted as if it had been typed on the keyboard.	1393	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
		1394
		1395	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
		1396	inserted too.
		1397
		1398	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1399	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1400	binding causes the value of the internal selection to be copied to the
		1401	CLIPBOARD selection, while the second binding causes the value of the
		1402	CLIPBOARD selection to be inserted.
787		1403
788	=back	1404	=back
789		1405
790	=head1 CHANGING FONTS	1406	=head1 CHANGING FONTS
791		1407
792	Changing fonts (or font sizes, respectively) via the keypad is not yet	1408	Changing fonts (or font sizes, respectively) via the keypad is not yet
793	supported in rxvt-unicode. Bug me if you need this.	1409	supported in rxvt-unicode. Bug me if you need this.
794		1410
795	You can, however, switch fonts at runtime using escape sequences (and	1411	You can, however, switch fonts at runtime using escape sequences, e.g.:
796	therefore using the menubar), e.g.:
797		1412
798	printf '\e]701;%s\007' "9x15bold,xft:Kochi Gothic"	1413	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"
		1414
		1415	You can use keyboard shortcuts, too:
		1416
		1417	URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		1418	URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
799		1419
800	rxvt-unicode will automatically re-apply these fonts to the output so far.	1420	rxvt-unicode will automatically re-apply these fonts to the output so far.
801		1421
802	=head1 ISO 14755 SUPPORT	1422	=head1 ISO 14755 SUPPORT
803		1423
804	ISO 14755 is a standard for entering and viewing unicode characters	1424	ISO 14755 is a standard for entering and viewing unicode characters
805	and character codes using the keyboard. It consists of 4 parts. The	1425	and character codes using the keyboard. It consists of 4 parts. The
806	first part is available rxvt-unicode has been compiled with	1426	first part is available if rxvt-unicode has been compiled with
807	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1427	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
808	with C<--enable-iso14755>.	1428	with C<--enable-iso14755>.
809		1429
810	=over 4	1430	=over 4
811		1431
812	=item 5.1: Basic method	1432	=item * 5.1: Basic method
813		1433
814	This allows you to enter unicode characters using their hexcode.	1434	This allows you to enter unicode characters using their hexcode.
815		1435
816	Start by pressing and holding both C<Control> and C<Shift>, then enter	1436	Start by pressing and holding both C<Control> and C<Shift>, then enter
817	hex-digits (between one and six). Releasing C<Control> and C<Shift> will	1437	hex-digits (between one and six). Releasing C<Control> and C<Shift> will
…		…
824	address, which you cannot type. Fortunately, the card has the e-mail	1444	address, which you cannot type. Fortunately, the card has the e-mail
825	address printed as hexcodes, e.g. C<671d 65e5>. You can enter this easily	1445	address printed as hexcodes, e.g. C<671d 65e5>. You can enter this easily
826	by pressing C<Control> and C<Shift>, followed by C<6-7-1-D-SPACE-6-5-E-5>,	1446	by pressing C<Control> and C<Shift>, followed by C<6-7-1-D-SPACE-6-5-E-5>,
827	followed by releasing the modifier keys.	1447	followed by releasing the modifier keys.
828		1448
829	=item 5.2: Keyboard symbols entry method	1449	=item * 5.2: Keyboard symbols entry method
830		1450
831	This mode lets you input characters representing the keycap symbols of	1451	This mode lets you input characters representing the keycap symbols of
832	your keyboard, if representable in the current locale encoding.	1452	your keyboard, if representable in the current locale encoding.
833		1453
834	Start by pressing C<Control> and C<Shift> together, then releasing	1454	Start by pressing C<Control> and C<Shift> together, then releasing
835	them. The next special key (cursor keys, home etc.) you enter will not	1455	them. The next special key (cursor keys, home etc.) you enter will not
836	invoke it's usual function but instead will insert the corresponding	1456	invoke its usual function but instead will insert the corresponding
837	keycap symbol. The symbol will only be entered when the key has been	1457	keycap symbol. The symbol will only be entered when the key has been
838	released, otherwise pressing e.g. C<Shift> would enter the symbol for	1458	released, otherwise pressing e.g. C<Shift> would enter the symbol for
839	C<ISO Level 2 Switch>, although your intention might have beenm to enter a	1459	C<ISO Level 2 Switch>, although your intention might have been to enter a
840	reverse tab (Shift-Tab).	1460	reverse tab (Shift-Tab).
841		1461
842	=item 5.3: Screen-selection entry method	1462	=item * 5.3: Screen-selection entry method
843		1463
844	While this is implemented already (it's basically the selection	1464	While this is implemented already (it's basically the selection
845	mechanism), it could be extended by displaying a unicode character map.	1465	mechanism), it could be extended by displaying a unicode character map.
846		1466
847	=item 5.4: Feedback method for identifying displayed characters for later input	1467	=item * 5.4: Feedback method for identifying displayed characters for later input
848		1468
849	This method lets you display the unicode character code associated with	1469	This method lets you display the unicode character code associated with
850	characters already displayed.	1470	characters already displayed.
851		1471
852	You enter this mode by holding down C<Control> and C<Shift> together, then	1472	You enter this mode by holding down C<Control> and C<Shift> together, then
853	pressing and holding the left mouse button and moving around. The unicode	1473	pressing and holding the left mouse button and moving around. The unicode
854	hex code(s) (it might be a combining character) of the character under the	1474	hex code(s) (it might be a combining character) of the character under the
855	pointer is displayed until you release C<Control> and C<Shift>.	1475	pointer is displayed until you release C<Control> and C<Shift>.
856		1476
		1477	In addition to the hex codes it will display the font used to draw this
		1478	character - due to implementation reasons, characters combined with
		1479	combining characters, line drawing characters and unknown characters will
		1480	always be drawn using the built-in support font.
		1481
857	=back	1482	=back
858		1483
859	With respect to conformance, rxvt-unicode is supposed to be compliant to	1484	With respect to conformance, rxvt-unicode is supposed to be compliant to
860	both scenario A and B of ISO 14755, including part 5.2.	1485	both scenario A and B of ISO 14755, including part 5.2.
861		1486
862	=head1 LOGIN STAMP	1487	=head1 LOGIN STAMP
863		1488
864	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so	1489	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
865	that it can be seen via the I<who(1)> command, and can accept messages.	1490	it can be seen via the I<who(1)> command, and can accept messages. To
866	To allow this feature, B<@@RXVT_NAME@@> must be installed setuid root on	1491	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
867	some systems.	1492	on some systems or setgid to root or to some other group on others.
868		1493
869	=head1 COLORS AND GRAPHICS	1494	=head1 COLOURS AND GRAPHICS
870		1495
871	In addition to the default foreground and background colours,	1496	In addition to the default foreground and background colours,
872	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1497	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
873	high-intensity bold/blink versions of the same). Here is a list of the	1498	high-intensity (potentially bold/blink) versions of the same, and 72 (or
874	colours with their B<rgb.txt> names.	1499	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1500	cube plus a 8 (24) colour greyscale ramp.
		1501
		1502	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1503	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1504	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1505	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1506	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1507	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1508	use many similar 24-bit colours. It's typically not a problem in common
		1509	scenarios.
		1510
		1511	Here is a list of the ANSI colours with their names.
875		1512
876	=begin table	1513	=begin table
877		1514
878	B<color0> (black) = Black	1515	B<color0> (black) = Black
879	B<color1> (red) = Red3	1516	B<color1> (red) = Red3
…		…
899	It is also possible to specify the colour values of B<foreground>,	1536	It is also possible to specify the colour values of B<foreground>,
900	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1537	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
901	a number 0-15, as a convenient shorthand to reference the colour name of	1538	a number 0-15, as a convenient shorthand to reference the colour name of
902	color0-color15.	1539	color0-color15.
903		1540
		1541	The following text gives values for the standard 88 colour mode (and
		1542	values for the 256 colour mode in parentheses).
		1543
		1544	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1545
		1546	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1547	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1548
		1549	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1550	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1551	the RGB cube.
		1552
		1553	Together, all those colours implement the 88 (256) colour xterm
		1554	colours. Only the first 16 can be changed using resources currently, the
		1555	rest can only be changed via command sequences ("escape codes").
		1556
		1557	Applications are advised to use terminfo or command sequences to discover
		1558	number and RGB values of all colours (yes, you can query this...).
		1559
904	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1560	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
905	always swapping the foreground/background colours. This is in contrast to	1561	always swapping the foreground/background colours. This is in contrast to
906	I<xterm>(1) where the colours are only swapped if they have not otherwise	1562	I<xterm>(1) where the colours are only swapped if they have not otherwise
907	been specified. For example,	1563	been specified. For example,
908		1564
		1565	@@RXVT_NAME@@ -fg Black -bg White -rv
		1566
		1567	would yield White on Black, while on I<xterm>(1) it would yield Black on
		1568	White.
		1569
		1570	=head2 ALPHA CHANNEL SUPPORT
		1571
		1572	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
		1573	their act together, rxvt-unicode will do its own alpha channel management:
		1574
		1575	You can prefix any colour with an opaqueness percentage enclosed in
		1576	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1577	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1578	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1579	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1580	is the recommended format to specify transparency values, and works with
		1581	all ways to specify a colour.
		1582
		1583	For complete control, rxvt-unicode also supports
		1584	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1585	specifications, where the additional C<aaaa> component specifies opacity
		1586	(alpha) values. The minimum value of C<0000> is completely transparent,
		1587	while C<ffff> is completely opaque). The two example colours from
		1588	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
		1589	C<rgba:0000/ff00/0000/f332>.
		1590
		1591	You probably need to specify B<"-depth 32">, too, to force a visual with
		1592	alpha channels, and have the luck that your X-server uses ARGB pixel
		1593	layout, as X is far from just supporting ARGB visuals out of the box, and
		1594	rxvt-unicode just fudges around.
		1595
		1596	For example, the following selects an almost completely transparent black
		1597	background, and an almost opaque pink foreground:
		1598
		1599	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
		1600
		1601	When not using a background image, then the interpretation of the
		1602	alpha channel is up to your compositing manager (most interpret it as
		1603	transparency of course).
		1604
		1605	When using a background pixmap or pseudo-transparency, then the background
		1606	colour will always behave as if it were completely transparent (so the
		1607	background image shows instead), regardless of how it was specified, while
		1608	other colours will either be transparent as specified (the background
		1609	image will show through) on servers supporting the RENDER extension, or
		1610	fully opaque on servers not supporting the RENDER EXTENSION.
		1611
		1612	Please note that due to bugs in Xft, specifying alpha values might result
		1613	in garbage being displayed when the X-server does not support the RENDER
		1614	extension.
		1615
		1616	=head1 ENVIRONMENT
		1617
		1618	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
		1619
909	=over 4	1620	=over 4
910		1621
911	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1622	=item B<TERM>
912		1623
913	would yield White on Black, while on I<xterm>(1) it would yield Black	1624	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
914	on White.	1625	resources or on the command line.
		1626
		1627	=item B<COLORTERM>
		1628
		1629	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was
		1630	compiled with background image support, and optionally with the added
		1631	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome
		1632	screen.
		1633
		1634	=item B<COLORFGBG>
		1635
		1636	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
		1637	the colour code used as default foreground/text colour (or the string
		1638	C<default> to indicate that the default-colour escape sequence is to be
		1639	used), C<bg> is the colour code used as default background colour (or the
		1640	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
		1641	was compiled with background image support. Libraries like C<ncurses>
		1642	and C<slang> can (and do) use this information to optimize screen output.
		1643
		1644	=item B<WINDOWID>
		1645
		1646	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
		1647	window, which usually has subwindows for the scrollbar, the terminal
		1648	window and so on).
		1649
		1650	=item B<TERMINFO>
		1651
		1652	Set to the terminfo directory iff @@RXVT_NAME@@ was configured with
		1653	C<--with-terminfo=PATH>.
		1654
		1655	=item B<DISPLAY>
		1656
		1657	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
		1658	display in its child processes if C<-display> isn't used to override. It
		1659	defaults to C<:0> if it doesn't exist.
		1660
		1661	=item B<SHELL>
		1662
		1663	The shell to be used for command execution, defaults to C</bin/sh>.
		1664
		1665	=item B<RXVT_SOCKET> [I<sic>]
		1666
		1667	The unix domain socket path used by @@RXVT_NAME@@c(1) and
		1668	@@RXVT_NAME@@d(1).
		1669
		1670	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1671
		1672	=item B<URXVT_PERL_LIB>
		1673
		1674	Additional F<:>-separated library search path for perl extensions. Will be
		1675	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1676	directory.
		1677
		1678	=item B<URXVT_PERL_VERBOSITY>
		1679
		1680	See L<@@RXVT_NAME@@perl>(3).
		1681
		1682	=item B<HOME>
		1683
		1684	Used to locate the default directory for the unix domain socket for
		1685	daemon communications and to locate various resource files (such as
		1686	C<.Xdefaults>)
		1687
		1688	=item B<XAPPLRESDIR>
		1689
		1690	Directory where application-specific X resource files are located.
		1691
		1692	=item B<XENVIRONMENT>
		1693
		1694	If set and accessible, gives the name of a X resource file to be loaded by
		1695	@@RXVT_NAME@@.
915		1696
916	=back	1697	=back
917		1698
918	=head1 FREQUENTLY ASKED QUESTIONS (FAQ)	1699	=head1 FILES
919		1700
920	=over 4	1701	=over 4
921		1702
922	=item How do I know which rxvt-unicode version I'm using?	1703	=item B</usr/lib/X11/rgb.txt>
923		1704
924	The version number is displayed with the usage (-h). For rxvt-unicode	1705	Colour names.
925	version 2.14 and later, the escape sequence C<ESC[8n> sets the window
926	title to the version number.
927
928	=item Rxvt-unicode does not seem to understand the selected encoding?
929
930	=item Unicode does not seem to work?
931
932	If you encounter strange problems like typing an accented character but
933	getting two unrelated other characters or similar, or if program output is
934	subtly garbled, then you should check your locale settings.
935
936	Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
937	programs. Often rxvt-unicode is started in the C<C> locale, while the
938	login script running within the rxvt-unicode window changes the locale to
939	sth. else, e.h. C<en_GB.UTF-8>. Needless to say, this is not going to work.
940
941	The best thing is to fix your startup environment, as you will likely run
942	into other problems. If nothing works you can try this in your .profile.
943
944	printf '\e]701;%s\007' "$LC_CTYPE"
945
946	If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
947	supported on your systems. Some systems have a C<locale> comamnd which
948	displays this. If it displays sth. like:
949
950	locale: Cannot set LC_CTYPE to default locale: ...
951
952	Then the locale you specified is not supported on your system.
953
954	If nothing works and you are sure that everything is set correctly then
955	you will need to remember a little known fact: Some programs just don't
956	support locales :(
957
958	=item Why do the characters look ugly?
959
960	=item How does rxvt-unicode choose fonts?
961
962	Most fonts do not contain the full range of Unicode, which is
963	fine. Chances are that the font you (or the admin/package maintainer of
964	your system/os) have specified does not cover all the characters you want
965	to display.
966
967	B<rxvt-unicode> makes a best-effort try at finding a replacement
968	font. Often the result is fine, but sometimes the chosen font looks
969	bad. In that case, select a font of your taste and add it to the font
970	list, e.g.:
971
972	@@RXVT_NAME@@ -fn basefont,font2,font3...
973
974	When rxvt-unicode sees a character, it will first look at the base
975	font. If the base font does not contain the character, it will go to the
976	next font, and so on.
977
978	The only limitation is that all the fonts must not be larger than the base
979	font, as the base font defines the principial cell size, which must be the
980	same due to the way terminals work.
981
982	=item Why do some chinese characters look so different than others?
983
984	This is because there is a difference between script and language --
985	rxvt-unicode does not know which language the text that is output
986	is, as it only knows the unicode character codes. If rxvt-unicode
987	first sees a japanese character, it might choose a japanese font for
988	it. Subseqzuent japanese characters will take that font. Now, many chinese
989	characters aren't represented in japanese fonts, so when the first
990	non-japanese character comes up, rxvt-unicode will look for a chinese font
991	-- unfortunately at this point, it will still use the japanese font for
992	japanese characters that are also chinese.
993
994	The workaround is easy: just tag a chinese font at the end of your font
995	list (see the previous question). The key is to view the font list as
996	a preference list: If you expect more japanese, list a japanese font
997	first. If you expect more chinese, put a chinese font first.
998
999	In the future it might be possible to switch preferences at runtime (the
1000	internal data structure has no problem with using different fonts for
1001	the same character at the same time, but no interface for this has been
1002	designed yet).
1003
1004	=item How does rxvt-unicode determine the encoding to use?
1005
1006	=item Is there an option to switch encodings?
1007
1008	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
1009	specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
1010	UTF-8 or any other encodings with respect to terminal I/O.
1011
1012	The reasons is that there exists a perfectly fine mechanism for selecting
1013	the encoding, doing I/O and (most important) communicating this to all
1014	applications so everybody agrees on character properties such as width and
1015	code number. This mechanism is the I<locale>.
1016
1017	Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
1018	programs doing the same (that is, most) will automatically agree in the
1019	interpretation of characters.
1020
1021	Unfortunately, there is no system-independent way to select locales, nor
1022	is there a standard on how locale specifiers will look like.
1023
1024	On most systems, the content of the C<LC_CTYPE> environment variable
1025	contains an arbitrary string which corresponds to an already-installed
1026	locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
1027	C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
1028	(i.e. C<de> or C<german>) are also common.
1029
1030	Rxvt-unicode ignores all other locale categories, and except for
1031	the encoding, ignores country or language-specific settings,
1032	i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the same for rxvt-unicode.
1033
1034	If you want to use a specific encoding you have to make sure you start
1035	rxvt-unicode with the correct C<LC_CTYPE> category.
1036
1037	=item Can I switch locales at runtime?
1038
1039	Yes, using an escape sequence. Try sth. like this, which sets
1040	rxvt-unicode's idea of C<LC_CTYPE>.
1041
1042	printf '\e]701;%s\007' ja_JP.SJIS
1043
1044	See also the previous question.
1045
1046	Sometimes this capability is rather handy when you want to work in one
1047	locale (e.g. C<de_DE.UTF-8>) but some programs don't support UTF-8. For
1048	example, I use this script to start C<xjdic>, which first switches to a
1049	locale supported by xjdic and back later:
1050
1051	printf '\e]701;%s\007' ja_JP.SJIS
1052	xjdic -js
1053	printf '\e]701;%s\007' de_DE.UTF-8
1054
1055	=item Can I switch the fonts at runtime?
1056
1057	Yes, using an escape sequence. Try sth. like this, which has the same
1058	effect as using the C<-fn> switch, and takes effect immediately:
1059
1060	printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"
1061
1062	This is useful if you e.g. work primarily with japanese (and prefer a
1063	japanese font), but you have to switch to chinese temporarily, where
1064	japanese fonts would only be in your way.
1065
1066	You can think of this as a kind of manual ISO-2022 switching.
1067
1068	=item Mouse cut/paste suddenly no longer works.
1069
1070	Make sure that mouse reporting is actually turned off since killing
1071	some editors prematurely may leave the mouse in mouse report mode. I've
1072	heard that tcsh may use mouse reporting unless it otherwise specified. A
1073	quick check is to see if cut/paste works when the Alt or Shift keys are
1074	depressed. See @@RXVT_NAME@@(7)
1075
1076	=item What's with this bold/blink stuff?
1077
1078	If no bold colour is set via C<colorBD:>, bold will invert text using the
1079	standard foreground colour.
1080
1081	For the standard background colour, blinking will actually make the
1082	text blink when compiled with C<--enable-blinking>. with standard
1083	colours. Without C<--enable-blinking>, the blink attribute will be
1084	ignored.
1085
1086	On ANSI colours, bold/blink attributes are used to set high-intensity
1087	foreground/background colors.
1088
1089	color0-7 are the low-intensity colors.
1090
1091	color8-15 are the corresponding high-intensity colors.
1092
1093	=item I don't like the screen colors. How do I change them?
1094
1095	You can change the screen colors at run-time using F<~/.Xdefaults>
1096	resources (or as long-options).
1097
1098	Here are values that are supposed to resemble a VGA screen,
1099	including the murky brown that passes for low-intensity yellow:
1100
1101	Rxvt*color0: #000000
1102	Rxvt*color1: #A80000
1103	Rxvt*color2: #00A800
1104	Rxvt*color3: #A8A800
1105	Rxvt*color4: #0000A8
1106	Rxvt*color5: #A800A8
1107	Rxvt*color6: #00A8A8
1108	Rxvt*color7: #A8A8A8
1109
1110	Rxvt*color8: #000054
1111	Rxvt*color9: #FF0054
1112	Rxvt*color10: #00FF54
1113	Rxvt*color11: #FFFF54
1114	Rxvt*color12: #0000FF
1115	Rxvt*color13: #FF00FF
1116	Rxvt*color14: #00FFFF
1117	Rxvt*color15: #FFFFFF
1118
1119	=item What's with the strange Backspace/Delete key behaviour?
1120
1121	Assuming that the physical Backspace key corresponds to the
1122	BackSpace keysym (not likely for Linux ... see the following
1123	question) there are two standard values that can be used for
1124	Backspace: C<^H> and C<^?>.
1125
1126	Historically, either value is correct, but rxvt-unicode adopts the debian
1127	policy of using C<^?> when unsure, because it's the one only only correct
1128	choice :).
1129
1130	Rxvt-unicode tries to inherit the current stty settings and uses the value
1131	of `erase' to guess the value for backspace. If rxvt-unicode wasn't
1132	started from a terminal (say, from a menu or by remote shell), then the
1133	system value of `erase', which corresponds to CERASE in <termios.h>, will
1134	be used (which may not be the same as your stty setting).
1135
1136	For starting a new rxvt-unicode:
1137
1138	# use Backspace = ^H
1139	$ stty erase ^H
1140	$ @@RXVT_NAME@@
1141
1142	# use Backspace = ^?
1143	$ stty erase ^?
1144	$ @@RXVT_NAME@@
1145
1146	Toggle with "ESC[36h" / "ESC[36l" as documented in @@RXVT_NAME@@(7).
1147
1148	For an existing rxvt-unicode:
1149
1150	# use Backspace = ^H
1151	$ stty erase ^H
1152	$ echo -n "^[[36h"
1153
1154	# use Backspace = ^?
1155	$ stty erase ^?
1156	$ echo -n "^[[36l"
1157
1158	This helps satisfy some of the Backspace discrepancies that occur, but
1159	if you use Backspace = C<^H>, make sure that the termcap/terminfo value
1160	properly reflects that.
1161
1162	The Delete key is a another casualty of the ill-defined Backspace problem.
1163	To avoid confusion between the Backspace and Delete keys, the Delete
1164	key has been assigned an escape sequence to match the vt100 for Execute
1165	(ESC[3~) and is in the supplied termcap/terminfo.
1166
1167	Some other Backspace problems:
1168
1169	some editors use termcap/terminfo,
1170	some editors (vim I'm told) expect Backspace = ^H,
1171	GNU Emacs (and Emacs-like editors) use ^H for help.
1172
1173	Perhaps someday this will all be resolved in a consistent manner.
1174
1175	=item I don't like the key-bindings. How do I change them?
1176
1177	There are some compile-time selections available via configure. Unless
1178	you have run "configure" with the C<--disable-resources> option you can
1179	use the `keysym' resource to alter the keystrings associated with keysym
1180	0xFF00 - 0xFFFF (function, cursor keys, etc).
1181
1182	Here's an example for a tn3270 session started using `@@RXVT_NAME@@ -name tn3270'
1183
1184	!# ----- special uses ------:
1185	! tn3270 login, remap function and arrow keys.
1186	tn3270*font: *clean-bold-*-*--15-*
1187
1188	! keysym - used by rxvt only
1189	! Delete - ^D
1190	tn3270*keysym.0xFFFF: \004
1191
1192	! Home - ^A
1193	tn3270*keysym.0xFF50: \001
1194	! Left - ^B
1195	tn3270*keysym.0xFF51: \002
1196	! Up - ^P
1197	tn3270*keysym.0xFF52: \020
1198	! Right - ^F
1199	tn3270*keysym.0xFF53: \006
1200	! Down - ^N
1201	tn3270*keysym.0xFF54: \016
1202	! End - ^E
1203	tn3270*keysym.0xFF57: \005
1204
1205	! F1 - F12
1206	tn3270*keysym.0xFFBE: \e1
1207	tn3270*keysym.0xFFBF: \e2
1208	tn3270*keysym.0xFFC0: \e3
1209	tn3270*keysym.0xFFC1: \e4
1210	tn3270*keysym.0xFFC2: \e5
1211	tn3270*keysym.0xFFC3: \e6
1212	tn3270*keysym.0xFFC4: \e7
1213	tn3270*keysym.0xFFC5: \e8
1214	tn3270*keysym.0xFFC6: \e9
1215	tn3270*keysym.0xFFC7: \e0
1216	tn3270*keysym.0xFFC8: \e-
1217	tn3270*keysym.0xFFC9: \e=
1218
1219	! map Prior/Next to F7/F8
1220	tn3270*keysym.0xFF55: \e7
1221	tn3270*keysym.0xFF56: \e8
1222
1223	=item I'm using keyboard model XXX that has extra Prior/Next/Insert keys.
1224	How do I make use of them? For example, the Sun Keyboard type 4
1225	has the following mappings that rxvt-unicode doesn't recognize.
1226
1227	KP_Insert == Insert
1228	F22 == Print
1229	F27 == Home
1230	F29 == Prior
1231	F33 == End
1232	F35 == Next
1233
1234	Rather than have rxvt-unicode try to accomodate all the various possible keyboard
1235	mappings, it is better to use `xmodmap' to remap the keys as required for
1236	your particular machine.
1237
1238	=item How do I distinguish if I'm running rxvt-unicode or a regular xterm?
1239	I need this to decide about setting colors etc.
1240
1241	rxvt and rxvt-unicode always export the variable "COLORTERM", so you can
1242	check and see if that is set. Note that several programs, JED, slrn,
1243	Midnight Commander automatically check this variable to decide whether or
1244	not to use color.
1245
1246	=item How do I set the correct, full IP address for the DISPLAY variable?
1247
1248	If you've compiled rxvt-unicode with DISPLAY_IS_IP and ahve enabled
1249	insecure mode then it is possible to use the following shell script
1250	snippets to correctly set the display. If your version of rxvt-unicode
1251	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
1252	the COLORTERM variable can be used to distinguish rxvt-unicode from a
1253	regular xterm.
1254
1255	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
1256	snippets:
1257
1258	# Bourne/Korn/POSIX family of shells:
1259	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
1260	if [ ${TERM:-foo} = xterm ]; then
1261	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
1262	echo -n '^[Z'
1263	read term_id
1264	stty icanon echo
1265	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
1266	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
1267	read DISPLAY # set it in our local shell
1268	fi
1269	fi
1270
1271	=item How do I compile the manual pages for myself?
1272
1273	You need to have a recent version of perl installed as F</usr/bin/perl>,
1274	one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to
1275	the doc subdirectory and enter C<make alldoc>.
1276		1706
1277	=back	1707	=back
1278		1708
1279	=head1 ENVIRONMENT	1709	=head1 SEE ALSO
1280		1710
1281	B<@@RXVT_NAME@@> sets the environment variables B<TERM>, B<COLORTERM>	1711	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1282	and B<COLORFGBG>. The environment variable B<WINDOWID> is set to the X	1712	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1283	window id number of the B<@@RXVT_NAME@@> window and it also uses and
1284	sets the environment variable B<DISPLAY> to specify which display
1285	terminal to use. B<@@RXVT_NAME@@> uses the environment variables
1286	B<RXVTPATH> and B<PATH> to find XPM files.
1287		1713
1288	=head1 FILES	1714	=head1 CURRENT PROJECT COORDINATOR
1289		1715
1290	=over 4	1716	=over 4
1291		1717
1292	=item B</etc/utmp>	1718	=item Project Coordinator
1293		1719
1294	System file for login records.	1720	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1295		1721
1296	=item B</usr/lib/X11/rgb.txt>	1722	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1297
1298	Color names.
1299		1723
1300	=back	1724	=back
1301		1725
1302	=head1 SEE ALSO	1726	=head1 AUTHORS
1303
1304	@@RXVT_NAME@@(7), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1305
1306	=head1 BUGS
1307
1308	Check the BUGS file for an up-to-date list.
1309
1310	Cursor change support is not yet implemented.
1311
1312	Click-and-drag doesn't work with X11 mouse report overriding.
1313
1314	=head1 CURRENT PROJECT COORDINATOR
1315		1727
1316	=over 4	1728	=over 4
1317		1729
1318	=item Project Coordinator	1730	=item John Bovey
1319		1731
1320	@@RXVT_MAINT@@ L<@@RXVT_MAINTEMAIL@@>	1732	University of Kent, 1992, wrote the original Xvt.
1321		1733
1322	=item Web page maintainter	1734	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1323		1735
1324	@@RXVT_WEBMAINT@@ L<@@RXVT_WEBMAINTEMAIL@@>	1736	very heavily modified Xvt and came up with Rxvt
1325		1737
1326	L<@@RXVT_WEBPAGE@@>	1738	=item Angelo Haritsis <ah@doc.ic.ac.uk>
		1739
		1740	wrote the Greek Keyboard Input (no longer in code)
		1741
		1742	=item mj olesen <olesen@me.QueensU.CA>
		1743
		1744	Wrote the menu system.
		1745
		1746	Project Coordinator (changes.txt 2.11 to 2.21)
		1747
		1748	=item Oezguer Kesim <kesim@math.fu-berlin.de>
		1749
		1750	Project Coordinator (changes.txt 2.21a to 2.4.5)
		1751
		1752	=item Geoff Wing <gcw@pobox.com>
		1753
		1754	Rewrote screen display and text selection routines.
		1755
		1756	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
		1757
		1758	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
		1759
		1760	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
		1761	extension, random hacks, numerous bugfixes and extensions.
		1762
		1763	Project Coordinator (Changes 1.0 -)
		1764
		1765	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
		1766
		1767	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1327		1768
1328	=back	1769	=back
1329		1770
1330	=head1 AUTHORS
1331
1332	=over 4
1333
1334	=item John Bovey
1335
1336	University of Kent, 1992, wrote the original Xvt.
1337
1338	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>
1339
1340	very heavily modified Xvt and came up with Rxvt
1341
1342	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>
1343
1344	wrote the Greek Keyboard Input (no longer in code)
1345
1346	=item mj olesen L<< <olesen@me.QueensU.CA> >>
1347
1348	Wrote the menu system.
1349
1350	Project Coordinator (changes.txt 2.11 to 2.21)
1351
1352	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>
1353
1354	Project Coordinator (changes.txt 2.21a to 2.4.5)
1355
1356	=item Geoff Wing L<< <gcw@pobox.com> >>
1357
1358	Rewrote screen display and text selection routines. Project Coordinator
1359	(changes.txt 2.4.6 - rxvt-unicode)
1360
1361	=item Marc Alexander Lehmann L<< <rxvt@schmorp.de> >>
1362
1363	Forked rxvt-unicode, rewrote most of the display code and internal
1364	character handling to store text in unicode, improve xterm
1365	compatibility and apply numerous other bugfixes and extensions.
1366
1367	Project Coordinator (Changes 1.0 -)
1368
1369	=back
1370

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines