[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.156 by ayin, Sun Dec 30 22:43:40 2007 UTC vs.
Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
95	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
96		96
97	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
98	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
99	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
106	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
107		118
108	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
109		120
110	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
117		128
118	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
119		130
120	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
121		132
122	=item B<-tr>\|B<+tr>	133	=item B<-fps> I<number>
123		134
124	Turn on/off illusion of a transparent window background; resource B<transparent>.	135	Compile I<frills>: Set the refresh interval (in frames per second or
125		136	negative seconds); resource B<refreshRate>.
126	B<-ip> is still accepted as an obsolete alias but will be removed in
127	future versions.
128
129	I<Please address all transparency related issues to Sasha Vasko at
130	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
131		137
132	=item B<-fade> I<number>	138	=item B<-fade> I<number>
133		139
134	Fade the text by the given percentage when focus is lost. Small values	140	Fade the text by the given percentage when focus is lost. Small values
135	fade a little only, 100 completely replaces all colours by the fade	141	fade a little only, 100 completely replaces all colours by the fade
…		…
138	=item B<-fadecolor> I<colour>	144	=item B<-fadecolor> I<colour>
139		145
140	Fade to this colour when fading is used (see B<-fade>). The default colour	146	Fade to this colour when fading is used (see B<-fade>). The default colour
141	is opaque black. resource B<fadeColor>.	147	is opaque black. resource B<fadeColor>.
142		148
143	=item B<-tint> I<colour>	149	=item B<-icon> I<file>
144		150
145	Tint the transparent background pixmap with the given colour when	151	Compile I<pixbuf>: Use the specified image as application icon. This
146	transparency is enabled with B<-tr>. This only works for	152	is used by many window managers, taskbars and pagers to represent the
147	non-tiled backgrounds, currently. See also the B<-sh> option that can be	153	application window; resource I<iconFile>.
148	used to brighten or darken the image in addition to tinting it.
149	Please note that certain tint colours can be applied on the server-side,
150	thus yielding performance gain of two orders of magnitude. These colours are:
151	blue, red, green, cyan, magenta, yellow, and those close to them. Also
152	pure black and pure white colors essentially mean no tinting; resource
153	I<tintColor>. Example:
154
155	@@RXVT_NAME@@ -tr -tint blue -sh 40
156
157	=item B<-sh> I<number>
158
159	Darken (0 .. 100) or lighten (100 .. 200) the transparent
160	background image in addition to (or instead of) tinting it;
161	resource I<shading>.
162
163	=item B<-blt> I<string>
164
165	Specify background blending type. If background pixmap is specified
166	at the same time as transparency - such pixmap will be blended over
167	transparency image, using method specified. Supported values are :
168	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
169	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
170	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
171	alpha-blending. Compile I<afterimage>; resource I<blendType>.
172
173	=item B<-blr> I<HxV>
174
175	Apply Gaussian Blur with the specified radii to the transparent
176	background image. If single number is specified - both vertical and
177	horizontal radii are considered to be the same. Setting one of the
178	radii to 1 and another to a large number creates interesting effects
179	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
180	resource I<blurRadius>.
181		154
182	=item B<-bg> I<colour>	155	=item B<-bg> I<colour>
183		156
184	Window background colour; resource B<background>.	157	Window background colour; resource B<background>.
185		158
186	=item B<-fg> I<colour>	159	=item B<-fg> I<colour>
187		160
188	Window foreground colour; resource B<foreground>.	161	Window foreground colour; resource B<foreground>.
189
190	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
191
192	Compile I<afterimage>: Specify image file for the background and also
193	optionally specify its scaling with a geometry string. Note you may need to
194	add quotes to avoid special shell interpretation of the C<;> in the
195	command-line; for more details see resource B<backgroundPixmap>.
196		162
197	=item B<-cr> I<colour>	163	=item B<-cr> I<colour>
198		164
199	The cursor colour; resource B<cursorColor>.	165	The cursor colour; resource B<cursorColor>.
200		166
…		…
259		225
260	=item B<-ls>\|B<+ls>	226	=item B<-ls>\|B<+ls>
261		227
262	Start as a login-shell/sub-shell; resource B<loginShell>.	228	Start as a login-shell/sub-shell; resource B<loginShell>.
263		229
		230	=item B<-mc> I<milliseconds>
		231
		232	Specify the maximum time between multi-click selections.
		233
264	=item B<-ut>\|B<+ut>	234	=item B<-ut>\|B<+ut>
265		235
266	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	236	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
267	B<utmpInhibit>.	237	B<utmpInhibit>.
268		238
…		…
272	B<visualBell>.	242	B<visualBell>.
273		243
274	=item B<-sb>\|B<+sb>	244	=item B<-sb>\|B<+sb>
275		245
276	Turn on/off scrollbar; resource B<scrollBar>.	246	Turn on/off scrollbar; resource B<scrollBar>.
		247
		248	=item B<-sr>\|B<+sr>
		249
		250	Put scrollbar on right/left; resource B<scrollBar_right>.
		251
		252	=item B<-st>\|B<+st>
		253
		254	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		255	resource B<scrollBar_floating>.
277		256
278	=item B<-si>\|B<+si>	257	=item B<-si>\|B<+si>
279		258
280	Turn on/off scroll-to-bottom on TTY output inhibit; resource	259	Turn on/off scroll-to-bottom on TTY output inhibit; resource
281	B<scrollTtyOutput> has opposite effect.	260	B<scrollTtyOutput> has opposite effect.
…		…
288	=item B<-sw>\|B<+sw>	267	=item B<-sw>\|B<+sw>
289		268
290	Turn on/off scrolling with the scrollback buffer as new lines appear.	269	Turn on/off scrolling with the scrollback buffer as new lines appear.
291	This only takes effect if B<-si> is also given; resource	270	This only takes effect if B<-si> is also given; resource
292	B<scrollWithBuffer>.	271	B<scrollWithBuffer>.
293
294	=item B<-sr>\|B<+sr>
295
296	Put scrollbar on right/left; resource B<scrollBar_right>.
297
298	=item B<-st>\|B<+st>
299
300	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
301	resource B<scrollBar_floating>.
302		272
303	=item B<-ptab>\|B<+ptab>	273	=item B<-ptab>\|B<+ptab>
304		274
305	If enabled (default), "Horizontal Tab" characters are being stored as	275	If enabled (default), "Horizontal Tab" characters are being stored as
306	actual wide characters in the screen buffer, which makes it possible to	276	actual wide characters in the screen buffer, which makes it possible to
…		…
310		280
311	=item B<-bc>\|B<+bc>	281	=item B<-bc>\|B<+bc>
312		282
313	Blink the cursor; resource B<cursorBlink>.	283	Blink the cursor; resource B<cursorBlink>.
314		284
		285	=item B<-uc>\|B<+uc>
		286
		287	Make the cursor underlined; resource B<cursorUnderline>.
		288
315	=item B<-iconic>	289	=item B<-iconic>
316		290
317	Start iconified, if the window manager supports that option.	291	Start iconified, if the window manager supports that option.
318	Alternative form is B<-ic>.	292	Alternative form is B<-ic>.
319		293
…		…
335		309
336	=item B<-bl>	310	=item B<-bl>
337		311
338	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	312	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
339	if honoured by the WM, the rxvt-unicode window will not have window	313	if honoured by the WM, the rxvt-unicode window will not have window
340	decorations; resource B<borderLess>.	314	decorations; resource B<borderLess>. If the window manager does not
		315	support MWM hints (e.g. kwin), enables override-redirect mode.
341		316
342	=item B<-override-redirect>	317	=item B<-override-redirect>
343		318
344	Compile I<frills>: Sets override-redirect on the window; resource	319	Compile I<frills>: Sets override-redirect on the window; resource
345	B<override-redirect>.	320	B<override-redirect>.
		321
		322	=item B<-dockapp>
		323
		324	Sets the initial state of the window to WithdrawnState, which makes
		325	window managers that support this extension treat it as a dockapp.
346		326
347	=item B<-sbg>	327	=item B<-sbg>
348		328
349	Compile I<frills>: Disable the usage of the built-in block graphics/line	329	Compile I<frills>: Disable the usage of the built-in block graphics/line
350	drawing characters and just rely on what the specified fonts provide. Use	330	drawing characters and just rely on what the specified fonts provide. Use
…		…
354	=item B<-lsp> I<number>	334	=item B<-lsp> I<number>
355		335
356	Compile I<frills>: Lines (pixel height) to insert between each row of	336	Compile I<frills>: Lines (pixel height) to insert between each row of
357	the display. Useful to work around font rendering problems; resource	337	the display. Useful to work around font rendering problems; resource
358	B<lineSpace>.	338	B<lineSpace>.
		339
		340	=item B<-letsp> I<number>
		341
		342	Compile I<frills>: Amount to adjust the computed character width by
		343	to control overall letter spacing. Negative values will tighten up the
		344	letter spacing, positive values will space letters out more. Useful to
		345	work around odd font metrics; resource B<letterSpace>.
359		346
360	=item B<-tn> I<termname>	347	=item B<-tn> I<termname>
361		348
362	This option specifies the name of the terminal type to be set in the	349	This option specifies the name of the terminal type to be set in the
363	B<TERM> environment variable. This terminal type must exist in the	350	B<TERM> environment variable. This terminal type must exist in the
…		…
398	=item B<-pt> I<style>	385	=item B<-pt> I<style>
399		386
400	Compile I<XIM>: input style for input method; B<OverTheSpot>,	387	Compile I<XIM>: input style for input method; B<OverTheSpot>,
401	B<OffTheSpot>, B<Root>; resource B<preeditType>.	388	B<OffTheSpot>, B<Root>; resource B<preeditType>.
402		389
		390	If the perl extension C<xim-onthespot> is used (which is the default),
		391	then additionally the C<OnTheSpot> preedit type is available.
		392
403	=item B<-im> I<text>	393	=item B<-im> I<text>
404		394
405	Compile I<XIM>: input method name. resource B<inputMethod>.	395	Compile I<XIM>: input method name. resource B<inputMethod>.
406		396
407	=item B<-imlocale> I<string>	397	=item B<-imlocale> I<string>
…		…
421	Change the meaning of triple-click selection with the left mouse	411	Change the meaning of triple-click selection with the left mouse
422	button. Only effective when the original (non-perl) selection code is	412	button. Only effective when the original (non-perl) selection code is
423	in-use. Instead of selecting a full line it will extend the selection to	413	in-use. Instead of selecting a full line it will extend the selection to
424	the end of the logical line only. resource B<tripleclickwords>.	414	the end of the logical line only. resource B<tripleclickwords>.
425		415
		416	=item B<-dpb>\|B<+dpb>
		417
		418	Compile frills: Disable (or enable) emitting bracketed paste mode
		419	sequences (default enabled). Bracketed paste mode allows programs
		420	to detect when something is pasted. Since more and more programs
		421	abuse this, these sequences can be disabled. The command sequences to
		422	enable and query paste mode will still work, but the actual bracket
		423	sequences will no longer be emitted. You can also toggle this from the
		424	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		425
426	=item B<-insecure>	426	=item B<-insecure>
427		427
428	Enable "insecure" mode, which currently enables most of the escape	428	Enable "insecure" mode, which currently enables most of the escape
429	sequences that echo strings. See the resource B<insecure> for more	429	sequences that echo strings. See the resource B<insecure> for more
430	info.	430	info.
…		…
442		442
443	=item B<-ssr>\|B<+ssr>	443	=item B<-ssr>\|B<+ssr>
444		444
445	Turn on/off secondary screen scroll (default enabled); resource	445	Turn on/off secondary screen scroll (default enabled); resource
446	B<secondaryScroll>.	446	B<secondaryScroll>.
		447
		448	=item B<-rm> I<mode>
		449
		450	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		451	to one of B<auto> (the default), B<always> or B<never>. The latter two
		452	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		453	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		454	B<rewrapMode>.
447		455
448	=item B<-hold>\|B<+hold>	456	=item B<-hold>\|B<+hold>
449		457
450	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	458	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
451	will not immediately destroy its window when the program executed within	459	will not immediately destroy its window when the program executed within
452	it exits. Instead, it will wait till it is being killed or closed by the	460	it exits. Instead, it will wait till it is being killed or closed by the
453	user; resource B<hold>.	461	user; resource B<hold>.
		462
		463	=item B<-cd> I<path>
		464
		465	Sets the working directory for the shell (or the command specified via
		466	B<-e>). The I<path> must be an absolute path and it must exist for
		467	@@RXVT_NAME@@ to start; resource B<chdir>.
454		468
455	=item B<-xrm> I<string>	469	=item B<-xrm> I<string>
456		470
457	Works like the X Toolkit option of the same name, by adding the I<string>	471	Works like the X Toolkit option of the same name, by adding the I<string>
458	as if it were specified in a resource file. Resource values specified this	472	as if it were specified in a resource file. Resource values specified this
…		…
524		538
525	# now communicate with rxvt	539	# now communicate with rxvt
526	my $slave = $pty->slave;	540	my $slave = $pty->slave;
527	while (<$slave>) { print $slave "got <$_>\n" }	541	while (<$slave>) { print $slave "got <$_>\n" }
528		542
		543	Note that, despite what the name might imply, the file descriptor does not
		544	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		545	domain or tcp socket). While tty operations cannot be done in this case,
		546	B<@@RXVT_NAME@@> can still be remote controlled with it:
		547
		548	use Socket;
		549	use Fcntl;
		550
		551	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		552	fcntl $slave, Fcntl::F_SETFD, 0;
		553	system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
		554	close $slave;
		555
		556	syswrite $URXVT, "Type a secret password: ";
		557	my $secret = do { local $/ = "\r"; <$URXVT> };
		558	print "Not so secret anymore: $secret\n";
		559
529	=item B<-pe> I<string>	560	=item B<-pe> I<string>
530		561
531	Comma-separated list of perl extension scripts to use (or not to use) in	562	Comma-separated list of perl extension scripts to use (or not to use) in
532	this terminal instance. See resource B<perl-ext> for details.	563	this terminal instance. See resource B<perl-ext> for details.
533		564
…		…
542	You can set and change the resources using X11 tools like B<xrdb>. Many	573	You can set and change the resources using X11 tools like B<xrdb>. Many
543	distribution do also load settings from the B<~/.Xresources> file when X	574	distribution do also load settings from the B<~/.Xresources> file when X
544	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	575	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
545	with later settings overwriting earlier ones:	576	with later settings overwriting earlier ones:
546		577
547	1. system-wide app-defaults file, either locale-dependent OR global
548	2. app-defaults file in $XAPPLRESDIR	578	1. app-defaults file in $XAPPLRESDIR
		579	2. $HOME/.Xdefaults
549	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	580	3. RESOURCE_MANAGER property on root-window of screen 0
550	4. SCREEN_RESOURCES for the current screen	581	4. SCREEN_RESOURCES property on root-window of the current screen
551	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	582	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
552	6. resources specified via -xrm on the commandline	583	6. resources specified via -xrm on the commandline
553		584
554	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	585	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
555	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	586	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
560	be used. Command-line arguments can be used to override resource	591	be used. Command-line arguments can be used to override resource
561	settings. The following resources are supported (you might want to	592	settings. The following resources are supported (you might want to
562	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	593	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
563	extensions not documented here):	594	extensions not documented here):
564		595
565	=over 4	596	=over
566		597
567	=item B<depth:> I<bitdepth>	598	=item B<depth:> I<bitdepth>
568		599
569	Compile I<xft>: Attempt to find a visual with the given bit depth;	600	Compile I<xft>: Attempt to find a visual with the given bit depth;
570	option B<-depth>.	601	option B<-depth>.
		602
		603	=item B<buffered:> I<boolean>
		604
		605	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		606	On some card/driver combination enabling it slightly decreases
		607	performance, on most it greatly helps it. The slowdown is small, so it
		608	should normally be enabled.
571		609
572	=item B<geometry:> I<geom>	610	=item B<geometry:> I<geom>
573		611
574	Create the window with the specified X window geometry [default 80x24];	612	Create the window with the specified X window geometry [default 80x24];
575	option B<-geometry>.	613	option B<-geometry>.
…		…
589	Use the specified colour for the colour value I<n>, where 0-7	627	Use the specified colour for the colour value I<n>, where 0-7
590	corresponds to low-intensity (normal) colours and 8-15 corresponds to	628	corresponds to low-intensity (normal) colours and 8-15 corresponds to
591	high-intensity (bold = bright foreground, blink = bright background)	629	high-intensity (bold = bright foreground, blink = bright background)
592	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	630	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
593	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	631	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
594	names used are listed in the B<COLORS AND GRAPHICS> section.	632	names used are listed in the B<COLOURS AND GRAPHICS> section.
595		633
596	Colours higher than 15 cannot be set using resources (yet), but can be	634	Colours higher than 15 cannot be set using resources (yet), but can be
597	changed using an escape command (see @@RXVT_NAME@@(7)).	635	changed using an escape command (see @@RXVT_NAME@@(7)).
598		636
599	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	637	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
610	=item B<colorUL:> I<colour>	648	=item B<colorUL:> I<colour>
611		649
612	Use the specified colour to display underlined characters when the	650	Use the specified colour to display underlined characters when the
613	foreground colour is the default.	651	foreground colour is the default.
614		652
615	=item B<colorRV:> I<colour>
616
617	Use the specified colour as the background for reverse video characters
618	when OPTION_HC is disabled (--disable-frills).
619
620	=item B<underlineColor:> I<colour>	653	=item B<underlineColor:> I<colour>
621		654
622	If set, use the specified colour as the colour for the underline	655	If set, use the specified colour as the colour for the underline
623	itself. If unset, use the foreground colour.	656	itself. If unset, use the foreground colour.
		657
		658	=item B<highlightColor:> I<colour>
		659
		660	If set, use the specified colour as the background for highlighted
		661	characters. If unset, use reverse video.
		662
		663	=item B<highlightTextColor:> I<colour>
		664
		665	If set and highlightColor is set, use the specified colour as the
		666	foreground for highlighted characters.
624		667
625	=item B<cursorColor:> I<colour>	668	=item B<cursorColor:> I<colour>
626		669
627	Use the specified colour for the cursor. The default is to use the	670	Use the specified colour for the cursor. The default is to use the
628	foreground colour; option B<-cr>.	671	foreground colour; option B<-cr>.
…		…
635		678
636	=item B<reverseVideo:> I<boolean>	679	=item B<reverseVideo:> I<boolean>
637		680
638	B<True>: simulate reverse video by foreground and background colours;	681	B<True>: simulate reverse video by foreground and background colours;
639	option B<-rv>. B<False>: regular screen colours [default]; option	682	option B<-rv>. B<False>: regular screen colours [default]; option
640	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	683	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
641		684
642	=item B<jumpScroll:> I<boolean>	685	=item B<jumpScroll:> I<boolean>
643		686
644	B<True>: specify that jump scrolling should be used. When receiving lots	687	B<True>: specify that jump scrolling should be used. When receiving lots
645	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	688	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
659		702
660	B<False>: specify that everything is to be displayed, even	703	B<False>: specify that everything is to be displayed, even
661	if the refresh is too fast for the human eye to read anything (or the	704	if the refresh is too fast for the human eye to read anything (or the
662	monitor to display anything); option B<+ss>.	705	monitor to display anything); option B<+ss>.
663		706
664	=item B<transparent:> I<boolean>	707	=item B<refreshRate:> I<number>
665		708
666	Turn on/off illusion of a transparent window background.	709	Compile I<frills>: When positive, sets the maximum refreshes per second
667		710	(the default is C<60>). When zero or negative, sets the minimum interval
668	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in	711	between refreshes, negated. That is, positive numbers limit the number
669	future versions.	712	of refreshes per second to that number, similar to a fps limiter in
670		713	games. Zero or negative numbers get negated and directly set the minimum
671	I<Please address all transparency related issues to Sasha Vasko at	714	interval between refreshs, that is, C<10> and C<-0.1> both specify the
672	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>	715	same refresh interval (likewise C<50> and C<0.02>). Fractional values are
		716	supported; option B<-fps>.
673		717
674	=item B<fading:> I<number>	718	=item B<fading:> I<number>
675		719
676	Fade the text by the given percentage when focus is lost; option B<-fade>.	720	Fade the text by the given percentage when focus is lost; option B<-fade>.
677		721
678	=item B<fadeColor:> I<colour>	722	=item B<fadeColor:> I<colour>
679		723
680	Fade to this colour, when fading is used (see B<fading:>). The default	724	Fade to this colour, when fading is used (see B<fading:>). The default
681	colour is black; option B<-fadecolor>.	725	colour is black; option B<-fadecolor>.
682		726
683	=item B<tintColor:> I<colour>	727	=item B<iconFile:> I<file>
684		728
685	Tint the transparent background pixmap with the given colour; option	729	Set the application icon pixmap; option B<-icon>.
686	B<-tint>.
687
688	=item B<shading:> I<number>
689
690	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
691	in addition to tinting it; option B<-sh>.
692
693	=item B<blendType:> I<string>
694
695	Specify background blending type; option B<-blt>.
696
697	=item B<blurRadius:> I<number>
698
699	Apply Gaussian Blurr with the specified radius to the transparent
700	background image; option B<-blr>.
701		730
702	=item B<scrollColor:> I<colour>	731	=item B<scrollColor:> I<colour>
703		732
704	Use the specified colour for the scrollbar [default #B2B2B2].	733	Use the specified colour for the scrollbar [default #B2B2B2].
705		734
…		…
710		739
711	=item B<borderColor:> I<colour>	740	=item B<borderColor:> I<colour>
712		741
713	The colour of the border around the text area and between the scrollbar	742	The colour of the border around the text area and between the scrollbar
714	and the text.	743	and the text.
715
716	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
717
718	Use the specified image file for the background and also
719	optionally specify its scaling with a geometry string B<WxH+X+Y>,
720	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
721	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
722	centre (percent). A scale of 0 displays the image with tiling. A scale
723	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
724	an integer number of images in that direction. No image will be magnified
725	beyond 10 times its original size. The maximum permitted scale is 1000.
726	Additional operations can be specified after colon B<:op1:op2...>.
727	Supported operations are:
728
729	tile force background image to be tiled and not scaled. Equivalent to 0x0
730	propscale will scale image keeping proportions
731	auto will scale image to match window size. Equivalent to 100x100
732	hscale will scale image horizontally to the window size
733	vscale will scale image vertically to the window size
734	scale will scale image to match window size
735	root will tile image as if it was a root window background, auto-adjusting
736	whenever terminal window moves
737
738	If used in conjunction with B<-tr> option, the specified pixmap will be
739	blended over transparency image using either alpha-blending, or any
740	other blending type, specified with B<-blt "type"> option.
741
742	=item B<path:> I<path>
743
744	Specify the colon-delimited search path for finding background image files.
745		744
746	=item B<font:> I<fontlist>	745	=item B<font:> I<fontlist>
747		746
748	Select the fonts to be used. This is a comma separated list of font names	747	Select the fonts to be used. This is a comma separated list of font names
749	that are checked in order when trying to find glyphs for characters. The	748	that are checked in order when trying to find glyphs for characters. The
…		…
772	it is named first) and thus defines the character cell grid to be 9 pixels	771	it is named first) and thus defines the character cell grid to be 9 pixels
773	wide and 15 pixels high.	772	wide and 15 pixels high.
774		773
775	The second font is just used to add additional unicode characters not in	774	The second font is just used to add additional unicode characters not in
776	the base font, likewise the third, which is unfortunately non-bold, but	775	the base font, likewise the third, which is unfortunately non-bold, but
777	the bold version of the font does contain less characters, so this is a	776	the bold version of the font does contain fewer characters, so this is a
778	useful supplement.	777	useful supplement.
779		778
780	The third font is an Xft font with aliasing turned off, and the characters	779	The third font is an Xft font with aliasing turned off, and the characters
781	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	780	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
782	contains other characters, but we are not interested in them.	781	contains other characters, but we are not interested in them.
…		…
811	option B<-is>, the default), bold/blink font styles imply high	810	option B<-is>, the default), bold/blink font styles imply high
812	intensity foreground/background colours. Disabling this option (B<False>,	811	intensity foreground/background colours. Disabling this option (B<False>,
813	option B<+is>) disables this behaviour, the high intensity colours are not	812	option B<+is>) disables this behaviour, the high intensity colours are not
814	reachable.	813	reachable.
815		814
816	=item B<scrollstyle:> I<mode>
817
818	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
819	the author's favourite.
820
821	=item B<title:> I<string>	815	=item B<title:> I<string>
822		816
823	Set window title string, the default title is the command-line	817	Set window title string, the default title is the command-line
824	specified after the B<-e> option, if any, otherwise the application	818	specified after the B<-e> option, if any, otherwise the application
825	name; option B<-title>.	819	name; option B<-title>.
…		…
838	=item B<urgentOnBell:> I<boolean>	832	=item B<urgentOnBell:> I<boolean>
839		833
840	B<True>: set the urgency hint for the wm on receipt of a bell character.	834	B<True>: set the urgency hint for the wm on receipt of a bell character.
841	B<False>: do not set the urgency hint [default].	835	B<False>: do not set the urgency hint [default].
842		836
		837	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		838
843	=item B<visualBell:> I<boolean>	839	=item B<visualBell:> I<boolean>
844		840
845	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	841	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
846	B<False>: no visual bell [default]; option B<+vb>.	842	B<False>: no visual bell [default]; option B<+vb>.
847		843
…		…
849		845
850	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	846	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
851	the shell; option B<-ls>. B<False>: start as a normal sub-shell	847	the shell; option B<-ls>. B<False>: start as a normal sub-shell
852	[default]; option B<+ls>.	848	[default]; option B<+ls>.
853		849
		850	=item B<multiClickTime:> I<number>
		851
		852	Specify the maximum time in milliseconds between multi-click select
		853	events. The default is 500 milliseconds; option B<-mc>.
		854
854	=item B<utmpInhibit:> I<boolean>	855	=item B<utmpInhibit:> I<boolean>
855		856
856	B<True>: inhibit writing record into the system log file B<utmp>;	857	B<True>: inhibit writing record into the system log file B<utmp>;
857	option B<-ut>. B<False>: write record into the system log file B<utmp>	858	option B<-ut>. B<False>: write record into the system log file B<utmp>
858	[default]; option B<+ut>.	859	[default]; option B<+ut>.
…		…
870	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	871	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
871		872
872	This creates a new file in your home directory with the screen contents	873	This creates a new file in your home directory with the screen contents
873	every time you hit C<Print>.	874	every time you hit C<Print>.
874		875
		876	=item B<scrollstyle:> I<mode>
		877
		878	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		879	the author's favourite.
		880
		881	=item B<thickness:> I<number>
		882
		883	Set the scrollbar width in pixels.
		884
875	=item B<scrollBar:> I<boolean>	885	=item B<scrollBar:> I<boolean>
876		886
877	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	887	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
878	disable the scrollbar; option B<+sb>.	888	disable the scrollbar; option B<+sb>.
879		889
…		…
898	B<False>: do not scroll to bottom when tty receives output; option	908	B<False>: do not scroll to bottom when tty receives output; option
899	B<+si>.	909	B<+si>.
900		910
901	=item B<scrollWithBuffer:> I<boolean>	911	=item B<scrollWithBuffer:> I<boolean>
902		912
903	B<True>: scroll with scrollback buffer when tty receives new lines (and	913	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
904	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	914	try to show the same lines) and B<scrollTtyOutput> is False; option
905	with scrollback buffer when tty receives new lines; option B<+sw>.	915	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		916	new lines; option B<+sw>.
906		917
907	=item B<scrollTtyKeypress:> I<boolean>	918	=item B<scrollTtyKeypress:> I<boolean>
908		919
909	B<True>: scroll to bottom when a non-special key is pressed. Special keys	920	B<True>: scroll to bottom when a non-special key is pressed. Special keys
910	are those which are intercepted by rxvt-unicode for special handling and	921	are those which are intercepted by rxvt-unicode for special handling and
911	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	922	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
912	bottom when a non-special key is pressed; option B<+sk>.	923	bottom when a non-special key is pressed; option B<+sk>.
913		924
914	=item B<saveLines:> I<number>	925	=item B<saveLines:> I<number>
915		926
916	Save I<number> lines in the scrollback buffer [default 64]. This	927	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
917	resource is limited on most machines to 65535; option B<-sl>.
918		928
919	=item B<internalBorder:> I<number>	929	=item B<internalBorder:> I<number>
920		930
921	Internal border of I<number> pixels. This resource is limited to 100;	931	Internal border of I<number> pixels. This resource is limited to 100;
922	option B<-b>.	932	option B<-b>.
…		…
966	=item B<cursorBlink:> I<boolean>	976	=item B<cursorBlink:> I<boolean>
967		977
968	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	978	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
969	option B<-bc>.	979	option B<-bc>.
970		980
		981	=item B<cursorUnderline:> I<boolean>
		982
		983	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		984	option B<-uc>.
		985
971	=item B<pointerBlank:> I<boolean>	986	=item B<pointerBlank:> I<boolean>
972		987
973	B<True>: blank the pointer when a key is pressed or after a set number	988	B<True>: blank the pointer when a key is pressed or after a set number
974	of seconds of inactivity. B<False>: the pointer is always visible	989	of seconds of inactivity. B<False>: the pointer is always visible
975	[default].	990	[default].
…		…
980		995
981	=item B<pointerColor2:> I<colour>	996	=item B<pointerColor2:> I<colour>
982		997
983	Mouse pointer background colour.	998	Mouse pointer background colour.
984		999
		1000	=item B<pointerShape:> I<string>
		1001
		1002	Compile I<frills>: Specifies the name of the mouse pointer shape
		1003	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		1004	file for possible values (omit the C<XC_> prefix).
		1005
985	=item B<pointerBlankDelay:> I<number>	1006	=item B<pointerBlankDelay:> I<number>
986		1007
987	Specifies number of seconds before blanking the pointer [default 2]. Use a	1008	Specifies number of seconds before blanking the pointer [default 2]. Use a
988	large number (e.g. C<987654321>) to effectively disable the timeout.	1009	large number (e.g. C<987654321>) to effectively disable the timeout.
989		1010
990	=item B<backspacekey:> I<string>	1011	=item B<backspacekey:> I<string>
991		1012
992	The string to send when the backspace key is pressed. If set to B<DEC>	1013	The string to send when the backspace key is pressed. If set to B<DEC>
993	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	1014	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
994	(code 8) - which can be reversed with the appropriate DEC private mode	1015	(code 8) - which can be reversed with the appropriate DEC private mode
995	escape sequence.	1016	escape sequence.
996		1017
997	=item B<deletekey:> I<string>	1018	=item B<deletekey:> I<string>
998		1019
…		…
1015		1036
1016	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1037	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1017		1038
1018	=item B<preeditType:> I<style>	1039	=item B<preeditType:> I<style>
1019		1040
1020	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1041	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1021		1042
1022	=item B<inputMethod:> I<name>	1043	=item B<inputMethod:> I<name>
1023		1044
1024	I<name> of inputMethod to use; option B<-im>.	1045	I<name> of inputMethod to use; option B<-im>.
1025		1046
…		…
1043		1064
1044	Change the meaning of triple-click selection with the left mouse	1065	Change the meaning of triple-click selection with the left mouse
1045	button. Instead of selecting a full line it will extend the selection to	1066	button. Instead of selecting a full line it will extend the selection to
1046	the end of the logical line only; option B<-tcw>.	1067	the end of the logical line only; option B<-tcw>.
1047		1068
		1069	=item B<disablePasteBrackets:> I<boolean>
		1070
		1071	Prevent emission of paste bracket sequences; option B<-dpb>.
		1072
1048	=item B<insecure:> I<boolean>	1073	=item B<insecure:> I<boolean>
1049		1074
1050	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1075	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1051	echo arbitrary strings like the icon name or the locale. This could be	1076	echo arbitrary strings like the icon name or the locale. This could be
1052	abused if somebody gets 8-bit-clean access to your display, whether	1077	abused if somebody gets 8-bit-clean access to your display, whether
1053	through a mail client displaying mail bodies unfiltered or through	1078	through a mail client displaying mail bodies unfiltered or through
1054	write(1) or any other means. Therefore, these sequences are disabled by	1079	write(1) or any other means. Therefore, these sequences are disabled by
1055	default. (Note that many other terminals, including xterm, have these	1080	default. (Note that many other terminals, including xterm, have these
…		…
1073		1098
1074	=item B<secondaryScreen:> I<boolean>	1099	=item B<secondaryScreen:> I<boolean>
1075		1100
1076	Turn on/off secondary screen (default enabled).	1101	Turn on/off secondary screen (default enabled).
1077		1102
		1103	=item B<rewrapMode:> I<mode>
		1104
		1105	Sets long line rewrap behaviour on window resize to one of B<auto>
		1106	(default), B<always> or B<never>.
		1107
1078	=item B<secondaryScroll:> I<boolean>	1108	=item B<secondaryScroll:> I<boolean>
1079		1109
1080	Turn on/off secondary screen scroll (default enabled). If this	1110	Turn on/off secondary screen scroll (default enabled). If this
1081	option is enabled, scrolls on the secondary screen will change the	1111	option is enabled, scrolls on the secondary screen will change the
1082	scrollback buffer and switching to/from the secondary screen will	1112	scrollback buffer and, when secondaryScreen is off, switching
1083	instead scroll the screen up.	1113	to/from the secondary screen will instead scroll the screen up.
1084		1114
1085	=item B<hold>: I<boolean>	1115	=item B<hold>: I<boolean>
1086		1116
1087	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1117	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1088	will not immediately destroy its window when the program executed within	1118	will not immediately destroy its window when the program executed within
1089	it exits. Instead, it will wait till it is being killed or closed by the	1119	it exits. Instead, it will wait till it is being killed or closed by the
1090	user.	1120	user.
1091		1121
		1122	=item B<chdir>: I<path>
		1123
		1124	Sets the working directory for the shell (or the command specified via
		1125	B<-e>). The I<path> must be an absolute path and it must exist for
		1126	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1127	directory will be used; option B<-cd>.
		1128
1092	=item B<keysym.>I<sym>: I<string>	1129	=item B<keysym.>I<sym>: I<action>
1093		1130
1094	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1131	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1095	intervening resource name B<keysym.> cannot be omitted.	1132	resource name B<keysym.> cannot be omitted.
1096		1133
1097	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1134	Using this resource, you can map key combinations such as
1098	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1135	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1099	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1136	string than would normally result from that combination, making the
1100	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1137	terminal scroll up or down the way you want it, or any other thing an
1101	B<2>, B<3>, B<4>, B<5>.	1138	extension might provide.
		1139
		1140	The key combination that triggers the action, I<sym>, has the following format:
		1141
		1142	(modifiers-)key
		1143
		1144	Where I<modifiers> can be any combination of the following full or
		1145	abbreviated modifier names:
		1146
		1147	=begin table
		1148
		1149	B<ISOLevel3> B<I>
		1150	B<AppKeypad> B<K>
		1151	B<Control> B<C>
		1152	B<NumLock> B<N>
		1153	B<Shift> B<S>
		1154	B<Meta> B<M> I<or> B<A>
		1155	B<Lock> B<L>
		1156	B<Mod1> B<1>
		1157	B<Mod2> B<2>
		1158	B<Mod3> B<3>
		1159	B<Mod4> B<4>
		1160	B<Mod5> B<5>
		1161
		1162	=end table
1102		1163
1103	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1164	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1104	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1165	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1105	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1166	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1106	current application keymap mode state.	1167	current application keymap mode state.
1107		1168
1108	The spellings of I<key> can be obtained by using B<xev>(1) command or	1169	Due the the large number of modifier combinations, a key mapping will
1109	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1170	match if I<at least> the specified identifiers are being set, and no other
		1171	key mappings with those and more bits are being defined. That means that
		1172	defining a mapping for C<a> will automatically provide definitions for
		1173	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1174	themselves. See the C<builtin:> action, below, for a way to work around
		1175	this when this is a problem.
		1176
		1177	The spelling of I<key> depends on your implementation of X. An easy way to
		1178	find a key name is to use the B<xev>(1) command. You can find a list by
		1179	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1110	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1180	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1111	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1181	value (B<0x0000 - 0xFFFF>).
1112	performed in an exact manner; however, the closest match is assured.
1113		1182
1114	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1183	As with any resource value, the I<action> string may contain backslash
		1184	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1115	number), see RESOURCES in C<man 7 X> for futher details.	1185	number), see RESOURCES in C<man 7 X> for further details.
1116		1186
1117	You can define a range of keysyms in one shot by providing a I<string>	1187	An action starts with an action prefix that selects a certain type
1118	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1188	of action, followed by a colon. An action string without colons is
		1189	interpreted as a literal string to pass to the tty (as if it was
		1190	prefixed with C<string:>).
		1191
		1192	The following action prefixes are known - extensions can provide
		1193	additional prefixes:
		1194
		1195	=over
		1196
		1197	=item string:STRING
		1198
		1199	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1200	then the remaining C<STRING> will be passed to the program running in the
		1201	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1202	string C<echo rm -rf /> followed by a newline:
		1203
		1204	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1205
		1206	This could in theory be used to completely redefine your keymap.
		1207
		1208	In addition, for actions of this type, you can define a range of
		1209	keysyms in one shot by loading the C<keysym-list> perl extension and
		1210	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1119	should be a character not used by the strings.	1211	the delimiter `/' should be a character not used by the strings.
1120		1212
1121	Its usage can be demonstrated by an example:	1213	Its usage can be demonstrated by an example:
1122		1214
1123	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1215	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1124		1216
1125	The above line is equivalent to the following three lines:	1217	The above line is equivalent to the following three lines:
1126		1218
1127	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1219	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1128	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1220	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1129	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1221	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1130		1222
		1223	=item command:STRING
		1224
1131	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1225	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1132	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1226	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1227	the opposite of C<string:> - instead of sending it to the program running
		1228	in the terminal, it will be treated as if it were program output). This is
		1229	most useful to feed command sequences into @@RXVT_NAME@@.
		1230
1133	example the following means "change the current locale to C<zh_CN.GBK>	1231	For example the following means "change the current locale to C<zh_CN.GBK>
1134	when Control-Meta-c is being pressed":	1232	when Control-Meta-c is being pressed":
1135		1233
1136	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1234	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1137		1235
1138	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1236	The following example will map Control-Meta-1 and Control-Meta-2 to
1139	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1237	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1140	manpage. For example, the F<selection> extension (activated via	1238	font-switching at runtime:
1141	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1142		1239
1143	URxvt.keysym.M-C-c: perl:selection:rot13	1240	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1241	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1144		1242
1145	Due the the large number of modifier combinations, a defined key mapping	1243	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1146	will match if at I<at least> the specified identifiers are being set, and	1244	info):
1147	no other key mappings with those and more bits are being defined. That
1148	means that defining a key map for C<a> will automatically provide
1149	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1150	mappings themselves.
1151		1245
1152	Unfortunately, this will override built-in key mappings. For example	1246	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1247	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1248
		1249	=item builtin:
		1250
		1251	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1252	key binding existed for the key combination. The obvious use is to undo
		1253	the effect of existing bindings. The not so obvious use is to reinstate
		1254	bindings when another binding overrides too many modifiers.
		1255
1153	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1256	For example if you overwrite the C<Insert> key you will disable
1154	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1257	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1155	user-defined keymap using the C<builtin:> replacement:	1258	"holes" into the user-defined keymap using the C<builtin:> replacement:
1156		1259
1157	URxvt.keysym.Insert: <my insert key sequence>	1260	URxvt.keysym.Insert: <my insert key sequence>
1158	URxvt.keysym.S-Insert: builtin:	1261	URxvt.keysym.S-Insert: builtin:
1159		1262
1160	The first line defines a mapping for C<Insert> and I<any> combination	1263	The first line defines a mapping for C<Insert> and I<any> combination
1161	of modifiers. The second line re-establishes the default mapping for	1264	of modifiers. The second line re-establishes the default mapping for
1162	C<Shift-Insert>.	1265	C<Shift-Insert>.
1163		1266
1164	The following example will map Control-Meta-1 and Control-Meta-2 to	1267	=item builtin-string:
1165	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1166	font-switching at runtime:
1167		1268
1168	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1269	This action is mainly useful to restore string mappings for keys that
1169	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1270	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1271	difficult to explain - basically, this action will send the string to the
		1272	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1273	action for it.
1170		1274
1171	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1275	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1172	info):	1276	selection when you press C<Shift-Insert>. With the following bindings, it
		1277	would instead emit the (undocumented, but what applications running in the
		1278	terminal might expect) sequence C<ESC [ 2 $> instead:
1173		1279
1174	URxvt.keysym.M-C-3: command:\033[8;25;80t	1280	URxvt.keysym.S-Insert: builtin-string:
1175	URxvt.keysym.M-C-4: command:\033[8;48;110t	1281	URxvt.keysym.C-S-Insert: builtin:
		1282
		1283	The first line disables the paste functionality for that key
		1284	combination, and the second reinstates the default behaviour for
		1285	C<Control-Shift-Insert>, which would otherwise be overridden.
		1286
		1287	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1288	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1289	this:
		1290
		1291	URxvt.keysym.C-M-c: builtin-string:
		1292	URxvt.keysym.C-M-v: builtin-string:
		1293
		1294	=item EXTENSION:STRING
		1295
		1296	An action of this form invokes the action B<STRING>, if any, provided
		1297	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1298	be loaded automatically if necessary.
		1299
		1300	Not all extensions define actions, but popular extensions that do
		1301	include the I<selection> and I<matcher> extensions (documented in their
		1302	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1303	respectively).
		1304
		1305	From the silly examples department, this will rot13-"encrypt"
		1306	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1307	keyboards:
		1308
		1309	URxvt.keysym.M-C-c: selection:rot13
		1310
		1311	=item perl:STRING DEPRECATED
		1312
		1313	This is a deprecated way of invoking commands provided by perl
		1314	extensions. It is still supported, but should not be used anymore.
		1315
		1316	=back
1176		1317
1177	=item B<perl-ext-common>: I<string>	1318	=item B<perl-ext-common>: I<string>
1178		1319
1179	=item B<perl-ext>: I<string>	1320	=item B<perl-ext>: I<string>
1180		1321
1181	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1322	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1182	use in this terminal instance; option B<-pe>.	1323	use in this terminal instance; option B<-pe>.
1183		1324
1184	Extension names can be prefixed with a C<-> sign to prohibit using	1325	Extension names can be prefixed with a C<-> sign to remove them again, in
1185	them. This can be useful to selectively disable some extensions loaded	1326	case they had been specified earlier. This can be useful to selectively
1186	by default, or specified via the C<perl-ext-common> resource. For	1327	disable some extensions loaded by default, or specified via the
1187	example, C<default,-selection> will use all the default extension except	1328	C<perl-ext-common> resource. For example, C<default,-selection> will use
1188	C<selection>.	1329	all the default extensions except C<selection>.
1189		1330
1190	Extension names can also be followed by an argument in angle brackets	1331	To prohibit autoloading of extensions, you can prefix them with C</>,
1191	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1332	which will make urxvt refuse to automatically load them (this can be
1192	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1333	overridden, however, by specifying the extension name again without a
1193	multiple times with different arguments will pass multiple arguments to	1334	prefix, though). This does not prohibit extensions themselves loading
1194	the extension.	1335	other extensions. For example, C<default,/background> will keep the
		1336	C<background> extension from being loaded when a background OSC sequence
		1337	is received.
		1338
		1339	The default set includes the C<selection>, C<option-popup>,
		1340	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1341	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1342	in B<keysym> resources.
		1343
		1344	Any extension such that a corresponding resource is given on the
		1345	command line is automatically appended to B<perl-ext>.
1195		1346
1196	Each extension is looked up in the library directories, loaded if	1347	Each extension is looked up in the library directories, loaded if
1197	necessary, and bound to the current terminal instance.	1348	necessary, and bound to the current terminal instance. When the library
		1349	search path contains multiple extension files of the same name, then the
		1350	first one found will be used.
1198		1351
1199	If both of these resources are the empty string, then the perl	1352	If both of these resources are the empty string, then the perl interpreter
1200	interpreter will not be initialized. The idea behind two options is that	1353	will not be initialized. The rationale for having two options is that
1201	B<perl-ext-common> will be used for extensions that should be available to	1354	B<perl-ext-common> will be used for extensions that should be available to
1202	all instances, while B<perl-ext> is used for specific instances.	1355	all instances, while B<perl-ext> is used for specific instances.
1203		1356
1204	=item B<perl-eval>: I<string>	1357	=item B<perl-eval>: I<string>
1205		1358
1206	Perl code to be evaluated when all extensions have been registered. See	1359	Perl code to be evaluated when all extensions have been registered. See
1207	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1360	the @@RXVT_NAME@@perl(3) manpage.
1208	will be ignored when running setuid/setgid.
1209		1361
1210	=item B<perl-lib>: I<path>	1362	=item B<perl-lib>: I<path>
1211		1363
1212	Colon-separated list of additional directories that hold extension	1364	Colon-separated list of additional directories that hold extension
1213	scripts. When looking for extensions specified by the C<perl> resource,	1365	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1214	@@RXVT_NAME@@ will first look in these directories and then in	1366	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1215	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1367	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1216	will be ignored when running setuid/setgid.
1217		1368
1218	See the @@RXVT_NAME@@perl(3) manpage.	1369	See the @@RXVT_NAME@@perl(3) manpage.
1219		1370
1220	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1371	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1221		1372
…		…
1225	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1376	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1226		1377
1227	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1378	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1228	for details.	1379	for details.
1229		1380
1230	=item B<searchable-scrollback:> I<keysym>	1381	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1231		1382
1232	Sets the hotkey that starts the incremental scrollback buffer search	1383	This resource is deprecated and will be removed. Use a B<keysym> resource
1233	(default: C<M-s>).	1384	instead, e.g.:
1234		1385
		1386	URxvt.keysym.M-s: searchable-scrollback:start
		1387
1235	=item B<urlLauncher>: I<string>	1388	=item B<url-launcher>: I<string>
1236		1389
1237	Specifies the program to be started with a URL argument. Used by the	1390	Specifies the program to be started with a URL argument. Used by the
1238	C<selection-popup> and C<matcher> perl extensions.	1391	C<selection-popup> and C<matcher> perl extensions.
1239		1392
1240	=item B<transient-for>: I<windowid>	1393	=item B<transient-for>: I<windowid>
…		…
1243		1396
1244	=item B<override-redirect>: I<boolean>	1397	=item B<override-redirect>: I<boolean>
1245		1398
1246	Compile I<frills>: Sets override-redirect for the terminal window, making	1399	Compile I<frills>: Sets override-redirect for the terminal window, making
1247	it almost invisible to window managers; option B<-override-redirect>.	1400	it almost invisible to window managers; option B<-override-redirect>.
		1401
		1402	=item B<iso14755:> I<boolean>
		1403
		1404	Turn on/off ISO 14755 (default enabled).
1248		1405
1249	=item B<iso14755_52:> I<boolean>	1406	=item B<iso14755_52:> I<boolean>
1250		1407
1251	Turn on/off ISO 14755 5.2 mode (default enabled).	1408	Turn on/off ISO 14755 5.2 mode (default enabled).
1252		1409
…		…
1280	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1437	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1281		1438
1282	The behaviour of text selection and insertion/pasting mechanism is similar	1439	The behaviour of text selection and insertion/pasting mechanism is similar
1283	to I<xterm>(1).	1440	to I<xterm>(1).
1284		1441
1285	=over 4	1442	=over
1286		1443
1287	=item B<Selecting>:	1444	=item B<Selecting>:
1288		1445
1289	Left click at the beginning of the region, drag to the end of the region	1446	Left click at the beginning of the region, drag to the end of the region
1290	and release; Right click to extend the marked region; Left double-click	1447	and release; Right click to extend the marked region; Left double-click
…		…
1305	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1462	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1306		1463
1307	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1464	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1308	inserted too.	1465	inserted too.
1309		1466
		1467	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1468	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1469	binding causes the value of the internal selection to be copied to the
		1470	CLIPBOARD selection, while the second binding causes the value of the
		1471	CLIPBOARD selection to be inserted.
		1472
1310	=back	1473	=back
1311		1474
1312	=head1 CHANGING FONTS	1475	=head1 CHANGING FONTS
1313		1476
1314	Changing fonts (or font sizes, respectively) via the keypad is not yet	1477	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1331	and character codes using the keyboard. It consists of 4 parts. The	1494	and character codes using the keyboard. It consists of 4 parts. The
1332	first part is available if rxvt-unicode has been compiled with	1495	first part is available if rxvt-unicode has been compiled with
1333	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1496	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1334	with C<--enable-iso14755>.	1497	with C<--enable-iso14755>.
1335		1498
1336	=over 4	1499	=over
1337		1500
1338	=item * 5.1: Basic method	1501	=item * 5.1: Basic method
1339		1502
1340	This allows you to enter unicode characters using their hexcode.	1503	This allows you to enter unicode characters using their hexcode.
1341		1504
…		…
1395	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1558	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1396	it can be seen via the I<who(1)> command, and can accept messages. To	1559	it can be seen via the I<who(1)> command, and can accept messages. To
1397	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1560	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1398	on some systems or setgid to root or to some other group on others.	1561	on some systems or setgid to root or to some other group on others.
1399		1562
1400	=head1 COLORS AND GRAPHICS	1563	=head1 COLOURS AND GRAPHICS
1401		1564
1402	In addition to the default foreground and background colours,	1565	In addition to the default foreground and background colours,
1403	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1566	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1404	high-intensity bold/blink versions of the same). Here is a list of the	1567	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1405	colours with their names.	1568	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1569	cube plus a 8 (24) colour greyscale ramp.
		1570
		1571	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1572	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1573	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1574	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1575	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1576	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1577	use many similar 24-bit colours. It's typically not a problem in common
		1578	scenarios.
		1579
		1580	Here is a list of the ANSI colours with their names.
1406		1581
1407	=begin table	1582	=begin table
1408		1583
1409	B<color0> (black) = Black	1584	B<color0> (black) = Black
1410	B<color1> (red) = Red3	1585	B<color1> (red) = Red3
…		…
1430	It is also possible to specify the colour values of B<foreground>,	1605	It is also possible to specify the colour values of B<foreground>,
1431	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1606	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1432	a number 0-15, as a convenient shorthand to reference the colour name of	1607	a number 0-15, as a convenient shorthand to reference the colour name of
1433	color0-color15.	1608	color0-color15.
1434		1609
1435	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1610	The following text gives values for the standard 88 colour mode (and
1436	additional 72 colours. The first 64 of those (with indices 16 to 79)	1611	values for the 256 colour mode in parentheses).
1437	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1438	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1439		1612
		1613	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1614
		1615	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1616	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1617
		1618	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1619	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1620	the RGB cube.
		1621
1440	Together, all those colours implement the 88 colour xterm colours. Only	1622	Together, all those colours implement the 88 (256) colour xterm
1441	the first 16 can be changed using resources currently, the rest can only	1623	colours. Only the first 16 can be changed using resources currently, the
1442	be changed via command sequences ("escape codes").	1624	rest can only be changed via command sequences ("escape codes").
		1625
		1626	Applications are advised to use terminfo or command sequences to discover
		1627	number and RGB values of all colours (yes, you can query this...).
1443		1628
1444	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1629	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1445	always swapping the foreground/background colours. This is in contrast to	1630	always swapping the foreground/background colours. This is in contrast to
1446	I<xterm>(1) where the colours are only swapped if they have not otherwise	1631	I<xterm>(1) where the colours are only swapped if they have not otherwise
1447	been specified. For example,	1632	been specified. For example,
1448		1633
1449	=over 4
1450
1451	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1634	@@RXVT_NAME@@ -fg Black -bg White -rv
1452		1635
1453	would yield White on Black, while on I<xterm>(1) it would yield Black	1636	would yield White on Black, while on I<xterm>(1) it would yield Black on
1454	on White.	1637	White.
1455
1456	=back
1457		1638
1458	=head2 ALPHA CHANNEL SUPPORT	1639	=head2 ALPHA CHANNEL SUPPORT
1459		1640
1460	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1641	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1461	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1642	their act together, rxvt-unicode will do its own alpha channel management:
1462	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1643
1463	in addition to the ones provided by X, where the additional A component	1644	You can prefix any colour with an opaqueness percentage enclosed in
		1645	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1646	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1647	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1648	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1649	is the recommended format to specify transparency values, and works with
		1650	all ways to specify a colour.
		1651
		1652	For complete control, rxvt-unicode also supports
		1653	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1654	specifications, where the additional C<aaaa> component specifies opacity
1464	specifies opacity (alpha) values. The minimum value of C<0> is completely	1655	(alpha) values. The minimum value of C<0000> is completely transparent,
1465	transparent). You can also prefix any color with C<[percent]>, where	1656	while C<ffff> is completely opaque). The two example colours from
1466	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1657	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1467	the color, where C<0> is completely transparent and C<100> is completelxy	1658	C<rgba:0000/ff00/0000/f332>.
1468	opaque.
1469		1659
1470	You probably need to specify B<"-depth 32">, too, and have the luck that	1660	You probably need to specify B<"-depth 32">, too, to force a visual with
1471	your X-server uses ARGB pixel layout, as X is far from just supporting	1661	alpha channels, and have the luck that your X-server uses ARGB pixel
1472	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1662	layout, as X is far from just supporting ARGB visuals out of the box, and
		1663	rxvt-unicode just fudges around.
1473		1664
1474	For example, the following selects an almost completely transparent red	1665	For example, the following selects an almost completely transparent black
1475	background, and an almost opaque pink foreground:	1666	background, and an almost opaque pink foreground:
1476		1667
1477	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1668	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1478		1669
1479	I<Please note that transparency of any kind if completely unsupported by	1670	When not using a background image, then the interpretation of the
1480	the author. Don't bug him with installation questions!>	1671	alpha channel is up to your compositing manager (most interpret it as
		1672	transparency of course).
		1673
		1674	When using a background pixmap or pseudo-transparency, then the background
		1675	colour will always behave as if it were completely transparent (so the
		1676	background image shows instead), regardless of how it was specified, while
		1677	other colours will either be transparent as specified (the background
		1678	image will show through) on servers supporting the RENDER extension, or
		1679	fully opaque on servers not supporting the RENDER EXTENSION.
		1680
		1681	Please note that due to bugs in Xft, specifying alpha values might result
		1682	in garbage being displayed when the X-server does not support the RENDER
		1683	extension.
1481		1684
1482	=head1 ENVIRONMENT	1685	=head1 ENVIRONMENT
1483		1686
1484	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1687	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1485		1688
1486	=over 4	1689	=over
1487		1690
1488	=item B<TERM>	1691	=item B<TERM>
1489		1692
1490	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1693	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1491	resources or on the command line.	1694	resources or on the command line.
…		…
1519	C<--with-terminfo=PATH>.	1722	C<--with-terminfo=PATH>.
1520		1723
1521	=item B<DISPLAY>	1724	=item B<DISPLAY>
1522		1725
1523	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1726	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1524	display in its child processes.	1727	display in its child processes if C<-display> isn't used to override. It
		1728	defaults to C<:0> if it doesn't exist.
1525		1729
1526	=item B<SHELL>	1730	=item B<SHELL>
1527		1731
1528	The shell to be used for command execution, defaults to C</bin/sh>.	1732	The shell to be used for command execution, defaults to C</bin/sh>.
1529		1733
1530	=item B<RXVT_SOCKET>	1734	=item B<RXVT_SOCKET> [I<sic>]
1531		1735
1532	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1736	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1533	@@RXVT_NAME@@d(1).	1737	@@RXVT_NAME@@d(1).
1534		1738
1535	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1739	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1740
		1741	=item B<URXVT_PERL_LIB>
		1742
		1743	Additional F<:>-separated library search path for perl extensions. Will be
		1744	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1745	directory.
		1746
		1747	=item B<URXVT_PERL_VERBOSITY>
		1748
		1749	See L<@@RXVT_NAME@@perl>(3).
1536		1750
1537	=item B<HOME>	1751	=item B<HOME>
1538		1752
1539	Used to locate the default directory for the unix domain socket for	1753	Used to locate the default directory for the unix domain socket for
1540	daemon communications and to locate various resource files (such as	1754	daemon communications and to locate various resource files (such as
1541	C<.Xdefaults>)	1755	C<.Xdefaults>)
1542		1756
1543	=item B<XAPPLRESDIR>	1757	=item B<XAPPLRESDIR>
1544		1758
1545	Directory where various X resource files are being located.	1759	Directory where application-specific X resource files are located.
1546		1760
1547	=item B<XENVIRONMENT>	1761	=item B<XENVIRONMENT>
1548		1762
1549	If set and accessible, gives the name of a X resource file to be loaded by	1763	If set and accessible, gives the name of a X resource file to be loaded by
1550	@@RXVT_NAME@@.	1764	@@RXVT_NAME@@.
1551		1765
1552	=back	1766	=back
1553		1767
1554	=head1 FILES	1768	=head1 FILES
1555		1769
1556	=over 4	1770	=over
1557		1771
1558	=item B</usr/lib/X11/rgb.txt>	1772	=item B</usr/lib/X11/rgb.txt>
1559		1773
1560	Color names.	1774	Colour names.
1561		1775
1562	=back	1776	=back
1563		1777
1564	=head1 SEE ALSO	1778	=head1 SEE ALSO
1565		1779
		1780	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1566	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1781	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1567		1782
1568	=head1 CURRENT PROJECT COORDINATOR	1783	=head1 CURRENT PROJECT COORDINATOR
1569		1784
1570	=over 4	1785	=over
1571		1786
1572	=item Project Coordinator	1787	=item Project Coordinator
1573		1788
1574	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1789	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1575		1790
1576	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1791	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1577		1792
1578	=back	1793	=back
1579		1794
1580	=head1 AUTHORS	1795	=head1 AUTHORS
1581		1796
1582	=over 4	1797	=over
1583		1798
1584	=item John Bovey	1799	=item John Bovey
1585		1800
1586	University of Kent, 1992, wrote the original Xvt.	1801	University of Kent, 1992, wrote the original Xvt.
1587		1802
1588	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1803	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1589		1804
1590	very heavily modified Xvt and came up with Rxvt	1805	very heavily modified Xvt and came up with Rxvt
1591		1806
1592	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1807	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1593		1808
1594	wrote the Greek Keyboard Input (no longer in code)	1809	wrote the Greek Keyboard Input (no longer in code)
1595		1810
1596	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1811	=item mj olesen <olesen@me.QueensU.CA>
1597		1812
1598	Wrote the menu system.	1813	Wrote the menu system.
1599		1814
1600	Project Coordinator (changes.txt 2.11 to 2.21)	1815	Project Coordinator (changes.txt 2.11 to 2.21)
1601		1816
1602	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1817	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1603		1818
1604	Project Coordinator (changes.txt 2.21a to 2.4.5)	1819	Project Coordinator (changes.txt 2.21a to 2.4.5)
1605		1820
1606	=item Geoff Wing L<< <gcw@pobox.com> >>	1821	=item Geoff Wing <gcw@pobox.com>
1607		1822
1608	Rewrote screen display and text selection routines.	1823	Rewrote screen display and text selection routines.
1609		1824
1610	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1825	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1611		1826
1612	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1827	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1613		1828
1614	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1829	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1615	extension, random hacks, numerous bugfixes and extensions.	1830	extension, random hacks, numerous bugfixes and extensions.
1616		1831
1617	Project Coordinator (Changes 1.0 -)	1832	Project Coordinator (Changes 1.0 -)
1618		1833
1619	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1834	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1620		1835
1621	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1836	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1622		1837
1623	=back	1838	=back
1624		1839

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.156 by ayin, Sun Dec 30 22:43:40 2007 UTC vs. Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.156 by ayin, Sun Dec 30 22:43:40 2007 UTC vs.
Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC