[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.240 by sf-exg, Mon Oct 13 17:05:32 2014 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for possible
		114	visual ids).
		115
111	=item B<-geometry> I<geom>	116	=item B<-geometry> I<geom>
112		117
113	Window geometry (B<-g> still respected); resource B<geometry>.	118	Window geometry (B<-g> still respected); resource B<geometry>.
114		119
115	=item B<-rv>\|B<+rv>	120	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	126	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		127
123	=item B<-ss>\|B<+ss>	128	=item B<-ss>\|B<+ss>
124		129
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	130	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		131
137	=item B<-fade> I<number>	132	=item B<-fade> I<number>
138		133
139	Fade the text by the given percentage when focus is lost. Small values	134	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	135	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	138	=item B<-fadecolor> I<colour>
144		139
145	Fade to this colour when fading is used (see B<-fade>). The default colour	140	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	141	is opaque black. resource B<fadeColor>.
147		142
148	=item B<-tint> I<colour>	143	=item B<-icon> I<file>
149		144
150	Tint the transparent background pixmap with the given colour when	145	Compile I<pixbuf>: Use the specified image as application icon. This
151	transparency is enabled with B<-tr>. This only works for	146	is used by many window managers, taskbars and pagers to represent the
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be	147	application window; resource I<iconFile>.
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186		148
187	=item B<-bg> I<colour>	149	=item B<-bg> I<colour>
188		150
189	Window background colour; resource B<background>.	151	Window background colour; resource B<background>.
190		152
191	=item B<-fg> I<colour>	153	=item B<-fg> I<colour>
192		154
193	Window foreground colour; resource B<foreground>.	155	Window foreground colour; resource B<foreground>.
194
195	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197	Compile I<afterimage>: Specify image file for the background and also
198	optionally specify its scaling with a geometry string. Note you may need to
199	add quotes to avoid special shell interpretation of the C<;> in the
200	command-line; for more details see resource B<backgroundPixmap>.
201		156
202	=item B<-cr> I<colour>	157	=item B<-cr> I<colour>
203		158
204	The cursor colour; resource B<cursorColor>.	159	The cursor colour; resource B<cursorColor>.
205		160
…		…
264		219
265	=item B<-ls>\|B<+ls>	220	=item B<-ls>\|B<+ls>
266		221
267	Start as a login-shell/sub-shell; resource B<loginShell>.	222	Start as a login-shell/sub-shell; resource B<loginShell>.
268		223
		224	=item B<-mc> I<milliseconds>
		225
		226	Specify the maximum time between multi-click selections.
		227
269	=item B<-ut>\|B<+ut>	228	=item B<-ut>\|B<+ut>
270		229
271	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	230	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
272	B<utmpInhibit>.	231	B<utmpInhibit>.
273		232
…		…
315		274
316	=item B<-bc>\|B<+bc>	275	=item B<-bc>\|B<+bc>
317		276
318	Blink the cursor; resource B<cursorBlink>.	277	Blink the cursor; resource B<cursorBlink>.
319		278
		279	=item B<-uc>\|B<+uc>
		280
		281	Make the cursor underlined; resource B<cursorUnderline>.
		282
320	=item B<-iconic>	283	=item B<-iconic>
321		284
322	Start iconified, if the window manager supports that option.	285	Start iconified, if the window manager supports that option.
323	Alternative form is B<-ic>.	286	Alternative form is B<-ic>.
324		287
…		…
340		303
341	=item B<-bl>	304	=item B<-bl>
342		305
343	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	306	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
344	if honoured by the WM, the rxvt-unicode window will not have window	307	if honoured by the WM, the rxvt-unicode window will not have window
345	decorations; resource B<borderLess>.	308	decorations; resource B<borderLess>. If the window manager does not
		309	support MWM hints (e.g. kwin), enables override-redirect mode.
346		310
347	=item B<-override-redirect>	311	=item B<-override-redirect>
348		312
349	Compile I<frills>: Sets override-redirect on the window; resource	313	Compile I<frills>: Sets override-redirect on the window; resource
350	B<override-redirect>.	314	B<override-redirect>.
		315
		316	=item B<-dockapp>
		317
		318	Sets the initial state of the window to WithdrawnState, which makes
		319	window managers that support this extension treat it as a dockapp.
351		320
352	=item B<-sbg>	321	=item B<-sbg>
353		322
354	Compile I<frills>: Disable the usage of the built-in block graphics/line	323	Compile I<frills>: Disable the usage of the built-in block graphics/line
355	drawing characters and just rely on what the specified fonts provide. Use	324	drawing characters and just rely on what the specified fonts provide. Use
…		…
359	=item B<-lsp> I<number>	328	=item B<-lsp> I<number>
360		329
361	Compile I<frills>: Lines (pixel height) to insert between each row of	330	Compile I<frills>: Lines (pixel height) to insert between each row of
362	the display. Useful to work around font rendering problems; resource	331	the display. Useful to work around font rendering problems; resource
363	B<lineSpace>.	332	B<lineSpace>.
		333
		334	=item B<-letsp> I<number>
		335
		336	Compile I<frills>: Amount to adjust the computed character width by
		337	to control overall letter spacing. Negative values will tighten up the
		338	letter spacing, positive values will space letters out more. Useful to
		339	work around odd font metrics; resource B<letterSpace>.
364		340
365	=item B<-tn> I<termname>	341	=item B<-tn> I<termname>
366		342
367	This option specifies the name of the terminal type to be set in the	343	This option specifies the name of the terminal type to be set in the
368	B<TERM> environment variable. This terminal type must exist in the	344	B<TERM> environment variable. This terminal type must exist in the
…		…
553	You can set and change the resources using X11 tools like B<xrdb>. Many	529	You can set and change the resources using X11 tools like B<xrdb>. Many
554	distribution do also load settings from the B<~/.Xresources> file when X	530	distribution do also load settings from the B<~/.Xresources> file when X
555	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	531	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
556	with later settings overwriting earlier ones:	532	with later settings overwriting earlier ones:
557		533
558	1. system-wide app-defaults file, either locale-dependent OR global
559	2. app-defaults file in $XAPPLRESDIR	534	1. app-defaults file in $XAPPLRESDIR
		535	2. $HOME/.Xdefaults
560	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	536	3. RESOURCE_MANAGER property on root-window of screen 0
561	4. SCREEN_RESOURCES for the current screen	537	4. SCREEN_RESOURCES property on root-window of the current screen
562	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	538	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
563	6. resources specified via -xrm on the commandline	539	6. resources specified via -xrm on the commandline
564		540
565	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	541	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
566	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	542	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
607	Use the specified colour for the colour value I<n>, where 0-7	583	Use the specified colour for the colour value I<n>, where 0-7
608	corresponds to low-intensity (normal) colours and 8-15 corresponds to	584	corresponds to low-intensity (normal) colours and 8-15 corresponds to
609	high-intensity (bold = bright foreground, blink = bright background)	585	high-intensity (bold = bright foreground, blink = bright background)
610	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	586	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
611	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	587	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
612	names used are listed in the B<COLORS AND GRAPHICS> section.	588	names used are listed in the B<COLOURS AND GRAPHICS> section.
613		589
614	Colours higher than 15 cannot be set using resources (yet), but can be	590	Colours higher than 15 cannot be set using resources (yet), but can be
615	changed using an escape command (see @@RXVT_NAME@@(7)).	591	changed using an escape command (see @@RXVT_NAME@@(7)).
616		592
617	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	593	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
628	=item B<colorUL:> I<colour>	604	=item B<colorUL:> I<colour>
629		605
630	Use the specified colour to display underlined characters when the	606	Use the specified colour to display underlined characters when the
631	foreground colour is the default.	607	foreground colour is the default.
632		608
633	=item B<colorRV:> I<colour>
634
635	Use the specified colour as the background for reverse video characters
636	when OPTION_HC is disabled (--disable-frills).
637
638	=item B<underlineColor:> I<colour>	609	=item B<underlineColor:> I<colour>
639		610
640	If set, use the specified colour as the colour for the underline	611	If set, use the specified colour as the colour for the underline
641	itself. If unset, use the foreground colour.	612	itself. If unset, use the foreground colour.
		613
		614	=item B<highlightColor:> I<colour>
		615
		616	If set, use the specified colour as the background for highlighted
		617	characters. If unset, use reverse video.
		618
		619	=item B<highlightTextColor:> I<colour>
		620
		621	If set and highlightColor is set, use the specified colour as the
		622	foreground for highlighted characters.
642		623
643	=item B<cursorColor:> I<colour>	624	=item B<cursorColor:> I<colour>
644		625
645	Use the specified colour for the cursor. The default is to use the	626	Use the specified colour for the cursor. The default is to use the
646	foreground colour; option B<-cr>.	627	foreground colour; option B<-cr>.
…		…
653		634
654	=item B<reverseVideo:> I<boolean>	635	=item B<reverseVideo:> I<boolean>
655		636
656	B<True>: simulate reverse video by foreground and background colours;	637	B<True>: simulate reverse video by foreground and background colours;
657	option B<-rv>. B<False>: regular screen colours [default]; option	638	option B<-rv>. B<False>: regular screen colours [default]; option
658	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	639	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
659		640
660	=item B<jumpScroll:> I<boolean>	641	=item B<jumpScroll:> I<boolean>
661		642
662	B<True>: specify that jump scrolling should be used. When receiving lots	643	B<True>: specify that jump scrolling should be used. When receiving lots
663	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	644	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
677		658
678	B<False>: specify that everything is to be displayed, even	659	B<False>: specify that everything is to be displayed, even
679	if the refresh is too fast for the human eye to read anything (or the	660	if the refresh is too fast for the human eye to read anything (or the
680	monitor to display anything); option B<+ss>.	661	monitor to display anything); option B<+ss>.
681		662
682	=item B<transparent:> I<boolean>
683
684	Turn on/off illusion of a transparent window background.
685
686	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
687	future versions.
688
689	I<Please address all transparency related issues to Sasha Vasko at
690	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
691
692	=item B<fading:> I<number>	663	=item B<fading:> I<number>
693		664
694	Fade the text by the given percentage when focus is lost; option B<-fade>.	665	Fade the text by the given percentage when focus is lost; option B<-fade>.
695		666
696	=item B<fadeColor:> I<colour>	667	=item B<fadeColor:> I<colour>
697		668
698	Fade to this colour, when fading is used (see B<fading:>). The default	669	Fade to this colour, when fading is used (see B<fading:>). The default
699	colour is black; option B<-fadecolor>.	670	colour is black; option B<-fadecolor>.
700		671
701	=item B<tintColor:> I<colour>	672	=item B<iconFile:> I<file>
702		673
703	Tint the transparent background pixmap with the given colour; option	674	Set the application icon pixmap; option B<-icon>.
704	B<-tint>.
705
706	=item B<shading:> I<number>
707
708	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
709	in addition to tinting it; option B<-sh>.
710
711	=item B<blendType:> I<string>
712
713	Specify background blending type; option B<-blt>.
714
715	=item B<blurRadius:> I<number>
716
717	Apply Gaussian Blurr with the specified radius to the transparent
718	background image; option B<-blr>.
719		675
720	=item B<scrollColor:> I<colour>	676	=item B<scrollColor:> I<colour>
721		677
722	Use the specified colour for the scrollbar [default #B2B2B2].	678	Use the specified colour for the scrollbar [default #B2B2B2].
723		679
…		…
728		684
729	=item B<borderColor:> I<colour>	685	=item B<borderColor:> I<colour>
730		686
731	The colour of the border around the text area and between the scrollbar	687	The colour of the border around the text area and between the scrollbar
732	and the text.	688	and the text.
733
734	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
735
736	Use the specified image file for the background and also
737	optionally specify its scaling with a geometry string B<WxH+X+Y>,
738	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
739	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
740	centre (percent). A scale of 0 displays the image with tiling. A scale
741	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
742	an integer number of images in that direction. No image will be magnified
743	beyond 10 times its original size. The maximum permitted scale is 1000.
744	Additional operations can be specified after colon B<:op1:op2...>.
745	Supported operations are:
746
747	tile force background image to be tiled and not scaled. Equivalent to 0x0
748	propscale will scale image keeping proportions
749	auto will scale image to match window size. Equivalent to 100x100
750	hscale will scale image horizontally to the window size
751	vscale will scale image vertically to the window size
752	scale will scale image to match window size
753	root will tile image as if it was a root window background, auto-adjusting
754	whenever terminal window moves
755
756	If used in conjunction with B<-tr> option, the specified pixmap will be
757	blended over transparency image using either alpha-blending, or any
758	other blending type, specified with B<-blt "type"> option.
759
760	=item B<path:> I<path>
761
762	Specify the colon-delimited search path for finding background image files.
763		689
764	=item B<font:> I<fontlist>	690	=item B<font:> I<fontlist>
765		691
766	Select the fonts to be used. This is a comma separated list of font names	692	Select the fonts to be used. This is a comma separated list of font names
767	that are checked in order when trying to find glyphs for characters. The	693	that are checked in order when trying to find glyphs for characters. The
…		…
790	it is named first) and thus defines the character cell grid to be 9 pixels	716	it is named first) and thus defines the character cell grid to be 9 pixels
791	wide and 15 pixels high.	717	wide and 15 pixels high.
792		718
793	The second font is just used to add additional unicode characters not in	719	The second font is just used to add additional unicode characters not in
794	the base font, likewise the third, which is unfortunately non-bold, but	720	the base font, likewise the third, which is unfortunately non-bold, but
795	the bold version of the font does contain less characters, so this is a	721	the bold version of the font does contain fewer characters, so this is a
796	useful supplement.	722	useful supplement.
797		723
798	The third font is an Xft font with aliasing turned off, and the characters	724	The third font is an Xft font with aliasing turned off, and the characters
799	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	725	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
800	contains other characters, but we are not interested in them.	726	contains other characters, but we are not interested in them.
…		…
851	=item B<urgentOnBell:> I<boolean>	777	=item B<urgentOnBell:> I<boolean>
852		778
853	B<True>: set the urgency hint for the wm on receipt of a bell character.	779	B<True>: set the urgency hint for the wm on receipt of a bell character.
854	B<False>: do not set the urgency hint [default].	780	B<False>: do not set the urgency hint [default].
855		781
		782	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		783
856	=item B<visualBell:> I<boolean>	784	=item B<visualBell:> I<boolean>
857		785
858	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	786	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
859	B<False>: no visual bell [default]; option B<+vb>.	787	B<False>: no visual bell [default]; option B<+vb>.
860		788
…		…
862		790
863	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	791	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
864	the shell; option B<-ls>. B<False>: start as a normal sub-shell	792	the shell; option B<-ls>. B<False>: start as a normal sub-shell
865	[default]; option B<+ls>.	793	[default]; option B<+ls>.
866		794
		795	=item B<multiClickTime:> I<number>
		796
		797	Specify the maximum time in milliseconds between multi-click select
		798	events. The default is 500 milliseconds; option B<-mc>.
		799
867	=item B<utmpInhibit:> I<boolean>	800	=item B<utmpInhibit:> I<boolean>
868		801
869	B<True>: inhibit writing record into the system log file B<utmp>;	802	B<True>: inhibit writing record into the system log file B<utmp>;
870	option B<-ut>. B<False>: write record into the system log file B<utmp>	803	option B<-ut>. B<False>: write record into the system log file B<utmp>
871	[default]; option B<+ut>.	804	[default]; option B<+ut>.
…		…
888	=item B<scrollstyle:> I<mode>	821	=item B<scrollstyle:> I<mode>
889		822
890	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	823	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
891	the author's favourite.	824	the author's favourite.
892		825
		826	=item B<thickness:> I<number>
		827
		828	Set the scrollbar width in pixels.
		829
893	=item B<scrollBar:> I<boolean>	830	=item B<scrollBar:> I<boolean>
894		831
895	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	832	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
896	disable the scrollbar; option B<+sb>.	833	disable the scrollbar; option B<+sb>.
897		834
…		…
916	B<False>: do not scroll to bottom when tty receives output; option	853	B<False>: do not scroll to bottom when tty receives output; option
917	B<+si>.	854	B<+si>.
918		855
919	=item B<scrollWithBuffer:> I<boolean>	856	=item B<scrollWithBuffer:> I<boolean>
920		857
921	B<True>: scroll with scrollback buffer when tty receives new lines (and	858	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
922	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	859	try to show the same lines) and B<scrollTtyOutput> is False; option
923	with scrollback buffer when tty receives new lines; option B<+sw>.	860	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		861	new lines; option B<+sw>.
924		862
925	=item B<scrollTtyKeypress:> I<boolean>	863	=item B<scrollTtyKeypress:> I<boolean>
926		864
927	B<True>: scroll to bottom when a non-special key is pressed. Special keys	865	B<True>: scroll to bottom when a non-special key is pressed. Special keys
928	are those which are intercepted by rxvt-unicode for special handling and	866	are those which are intercepted by rxvt-unicode for special handling and
…		…
984	=item B<cursorBlink:> I<boolean>	922	=item B<cursorBlink:> I<boolean>
985		923
986	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	924	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
987	option B<-bc>.	925	option B<-bc>.
988		926
		927	=item B<cursorUnderline:> I<boolean>
		928
		929	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		930	option B<-uc>.
		931
989	=item B<pointerBlank:> I<boolean>	932	=item B<pointerBlank:> I<boolean>
990		933
991	B<True>: blank the pointer when a key is pressed or after a set number	934	B<True>: blank the pointer when a key is pressed or after a set number
992	of seconds of inactivity. B<False>: the pointer is always visible	935	of seconds of inactivity. B<False>: the pointer is always visible
993	[default].	936	[default].
…		…
1006	large number (e.g. C<987654321>) to effectively disable the timeout.	949	large number (e.g. C<987654321>) to effectively disable the timeout.
1007		950
1008	=item B<backspacekey:> I<string>	951	=item B<backspacekey:> I<string>
1009		952
1010	The string to send when the backspace key is pressed. If set to B<DEC>	953	The string to send when the backspace key is pressed. If set to B<DEC>
1011	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	954	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1012	(code 8) - which can be reversed with the appropriate DEC private mode	955	(code 8) - which can be reversed with the appropriate DEC private mode
1013	escape sequence.	956	escape sequence.
1014		957
1015	=item B<deletekey:> I<string>	958	=item B<deletekey:> I<string>
1016		959
…		…
1112	Sets the working directory for the shell (or the command specified via	1055	Sets the working directory for the shell (or the command specified via
1113	B<-e>). The I<path> must be an absolute path and it must exist for	1056	B<-e>). The I<path> must be an absolute path and it must exist for
1114	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1057	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1115	directory will be used; option B<-cd>.	1058	directory will be used; option B<-cd>.
1116		1059
1117	=item B<keysym.>I<sym>: I<string>	1060	=item B<keysym.>I<sym>: I<action>
1118		1061
1119	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1062	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1120	intervening resource name B<keysym.> cannot be omitted.	1063	resource name B<keysym.> cannot be omitted.
1121		1064
1122	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1065	Using this resource, you can map key combinations such as
1123	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1066	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1124	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1067	string than would normally result from that combination, making the
1125	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1068	terminal scroll up or down the way you want it, or any other thing an
1126	B<2>, B<3>, B<4>, B<5>.	1069	extension might provide.
		1070
		1071	The key combination that triggers the action, I<sym>, has the following format:
		1072
		1073	(modifiers-)key
		1074
		1075	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1076	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1077	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1078	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1127		1079
1128	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1080	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1129	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1081	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1130	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1082	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1131	current application keymap mode state.	1083	current application keymap mode state.
1132		1084
1133	The spellings of I<key> can be obtained by using B<xev>(1) command or	1085	Due the the large number of modifier combinations, a key mapping will
1134	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1086	match if I<at least> the specified identifiers are being set, and no other
		1087	key mappings with those and more bits are being defined. That means that
		1088	defining a mapping for C<a> will automatically provide definitions for
		1089	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1090	themselves. See the C<builtin:> action, below, for a way to work around
		1091	this when this is a problem.
		1092
		1093	The spelling of I<key> depends on your implementation of X. An easy way to
		1094	find a key name is to use the B<xev>(1) command. You can find a list by
		1095	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1135	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1096	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1136	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1097	value (B<0x0000 - 0xFFFF>).
1137	performed in an exact manner; however, the closest match is assured.
1138		1098
1139	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1099	As with any resource value, the I<action> string may contain backslash
		1100	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1140	number), see RESOURCES in C<man 7 X> for futher details.	1101	number), see RESOURCES in C<man 7 X> for further details.
1141		1102
1142	You can define a range of keysyms in one shot by providing a I<string>	1103	An action starts with an action prefix that selects a certain type
1143	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1104	of action, followed by a colon. An action string without colons is
		1105	interpreted as a literal string to pass to the tty (as if it was
		1106	prefixed with C<string:>).
		1107
		1108	The following action prefixes are known - extensions can provide
		1109	additional prefixes:
		1110
		1111	=over 4
		1112
		1113	=item string:STRING
		1114
		1115	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1116	then the remaining C<STRING> will be passed to the program running in the
		1117	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1118	string C<echo rm -rf /> followed by a newline:
		1119
		1120	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1121
		1122	This could in theory be used to completely redefine your keymap.
		1123
		1124	In addition, for actions of this type, you can define a range of
		1125	keysyms in one shot by loading the C<keysym-list> perl extension and
		1126	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1144	should be a character not used by the strings.	1127	the delimiter `/' should be a character not used by the strings.
1145		1128
1146	Its usage can be demonstrated by an example:	1129	Its usage can be demonstrated by an example:
1147		1130
1148	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1131	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1149		1132
1150	The above line is equivalent to the following three lines:	1133	The above line is equivalent to the following three lines:
1151		1134
1152	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1135	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1153	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1136	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1154	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1137	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1155		1138
		1139	=item command:STRING
		1140
1156	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1141	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1157	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1142	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1143	the opposite of C<string:> - instead of sending it to the program running
		1144	in the terminal, it will be treated as if it were program output). This is
		1145	most useful to feed command sequences into @@RXVT_NAME@@.
		1146
1158	example the following means "change the current locale to C<zh_CN.GBK>	1147	For example the following means "change the current locale to C<zh_CN.GBK>
1159	when Control-Meta-c is being pressed":	1148	when Control-Meta-c is being pressed":
1160		1149
1161	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1150	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1162		1151
1163	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1152	The following example will map Control-Meta-1 and Control-Meta-2 to
1164	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1153	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1165	manpage. For example, the F<selection> extension (activated via	1154	font-switching at runtime:
1166	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1167		1155
1168	URxvt.keysym.M-C-c: perl:selection:rot13	1156	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1157	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1169		1158
1170	Due the the large number of modifier combinations, a defined key mapping	1159	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1171	will match if at I<at least> the specified identifiers are being set, and	1160	info):
1172	no other key mappings with those and more bits are being defined. That
1173	means that defining a key map for C<a> will automatically provide
1174	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1175	mappings themselves.
1176		1161
1177	Unfortunately, this will override built-in key mappings. For example	1162	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1163	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1164
		1165	=item builtin:
		1166
		1167	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1168	key binding existed for the key combination. The obvious use is to undo
		1169	the effect of existing bindings. The not so obvious use is to reinstate
		1170	bindings when another binding overrides too many modifiers.
		1171
1178	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1172	For example if you overwrite the C<Insert> key you will disable
1179	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1173	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1180	user-defined keymap using the C<builtin:> replacement:	1174	"holes" into the user-defined keymap using the C<builtin:> replacement:
1181		1175
1182	URxvt.keysym.Insert: <my insert key sequence>	1176	URxvt.keysym.Insert: <my insert key sequence>
1183	URxvt.keysym.S-Insert: builtin:	1177	URxvt.keysym.S-Insert: builtin:
1184		1178
1185	The first line defines a mapping for C<Insert> and I<any> combination	1179	The first line defines a mapping for C<Insert> and I<any> combination
1186	of modifiers. The second line re-establishes the default mapping for	1180	of modifiers. The second line re-establishes the default mapping for
1187	C<Shift-Insert>.	1181	C<Shift-Insert>.
1188		1182
1189	The following example will map Control-Meta-1 and Control-Meta-2 to	1183	=item builtin-string:
1190	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1191	font-switching at runtime:
1192		1184
1193	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1185	This action is mainly useful to restore string mappings for keys that
1194	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1186	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1187	difficult to explain - basically, this action will send the string to the
		1188	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1189	action for it.
1195		1190
1196	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1191	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1197	info):	1192	selection when you press C<Shift-Insert>. With the following bindings, it
		1193	would instead emit the (undocumented, but what applications running in the
		1194	terminal might expect) sequence C<ESC [ 2 $> instead:
1198		1195
1199	URxvt.keysym.M-C-3: command:\033[8;25;80t	1196	URxvt.keysym.S-Insert: builtin-string:
1200	URxvt.keysym.M-C-4: command:\033[8;48;110t	1197	URxvt.keysym.C-S-Insert: builtin:
		1198
		1199	The first line disables the paste functionality for that key
		1200	combination, and the second reinstates the default behaviour for
		1201	C<Control-Shift-Insert>, which would otherwise be overridden.
		1202
		1203	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1204	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1205	this:
		1206
		1207	URxvt.keysym.C-M-c: builtin-string:
		1208	URxvt.keysym.C-M-v: builtin-string:
		1209
		1210	=item EXTENSION:STRING
		1211
		1212	An action of this form invokes the action B<STRING>, if any, provided
		1213	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1214	be loaded automatically if necessary.
		1215
		1216	Not all extensions define actions, but popular extensions that do
		1217	include the I<selection> and I<matcher> extensions (documented in their
		1218	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1219	respectively).
		1220
		1221	From the silly examples department, this will rot13-"encrypt"
		1222	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1223	keyboards:
		1224
		1225	URxvt.keysym.M-C-c: selection:rot13
		1226
		1227	=item perl:STRING DEPRECATED
		1228
		1229	This is a deprecated way of invoking commands provided by perl
		1230	extensions. It is still supported, but should not be used anymore.
		1231
		1232	=back
1201		1233
1202	=item B<perl-ext-common>: I<string>	1234	=item B<perl-ext-common>: I<string>
1203		1235
1204	=item B<perl-ext>: I<string>	1236	=item B<perl-ext>: I<string>
1205		1237
…		…
1207	use in this terminal instance; option B<-pe>.	1239	use in this terminal instance; option B<-pe>.
1208		1240
1209	Extension names can be prefixed with a C<-> sign to prohibit using	1241	Extension names can be prefixed with a C<-> sign to prohibit using
1210	them. This can be useful to selectively disable some extensions loaded	1242	them. This can be useful to selectively disable some extensions loaded
1211	by default, or specified via the C<perl-ext-common> resource. For	1243	by default, or specified via the C<perl-ext-common> resource. For
1212	example, C<default,-selection> will use all the default extension except	1244	example, C<default,-selection> will use all the default extensions except
1213	C<selection>.	1245	C<selection>.
1214		1246
1215	Extension names can also be followed by an argument in angle brackets	1247	The default set includes the C<selection>, C<option-popup>,
1216	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1248	C<selection-popup> and C<readline> extensions, any extensions that
1217	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1249	define keybindings via C<BINDING> meta comments, and extensions which
1218	multiple times with different arguments will pass multiple arguments to	1250	are mentioned in B<keysym> resources.
1219	the extension.	1251
		1252	Any extension such that a corresponding resource is given on the
		1253	command line is automatically appended to B<perl-ext>.
1220		1254
1221	Each extension is looked up in the library directories, loaded if	1255	Each extension is looked up in the library directories, loaded if
1222	necessary, and bound to the current terminal instance.	1256	necessary, and bound to the current terminal instance. When the library
		1257	search path contains multiple extension files of the same name, then the
		1258	first one found will be used.
1223		1259
1224	If both of these resources are the empty string, then the perl	1260	If both of these resources are the empty string, then the perl interpreter
1225	interpreter will not be initialized. The idea behind two options is that	1261	will not be initialized. The rationale for having two options is that
1226	B<perl-ext-common> will be used for extensions that should be available to	1262	B<perl-ext-common> will be used for extensions that should be available to
1227	all instances, while B<perl-ext> is used for specific instances.	1263	all instances, while B<perl-ext> is used for specific instances.
1228		1264
1229	=item B<perl-eval>: I<string>	1265	=item B<perl-eval>: I<string>
1230		1266
1231	Perl code to be evaluated when all extensions have been registered. See	1267	Perl code to be evaluated when all extensions have been registered. See
1232	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1268	the @@RXVT_NAME@@perl(3) manpage.
1233	will be ignored when running setuid/setgid.
1234		1269
1235	=item B<perl-lib>: I<path>	1270	=item B<perl-lib>: I<path>
1236		1271
1237	Colon-separated list of additional directories that hold extension	1272	Colon-separated list of additional directories that hold extension
1238	scripts. When looking for extensions specified by the C<perl> resource,	1273	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239	@@RXVT_NAME@@ will first look in these directories and then in	1274	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1275	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241	will be ignored when running setuid/setgid.
1242		1276
1243	See the @@RXVT_NAME@@perl(3) manpage.	1277	See the @@RXVT_NAME@@perl(3) manpage.
1244		1278
1245	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1279	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1246		1280
…		…
1250	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1284	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1251		1285
1252	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1286	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1253	for details.	1287	for details.
1254		1288
1255	=item B<searchable-scrollback:> I<keysym>	1289	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1256		1290
1257	Sets the hotkey that starts the incremental scrollback buffer search	1291	This resource is deprecated and will be removed. Use a B<keysym> resource
1258	(default: C<M-s>).	1292	instead, e.g.:
1259		1293
		1294	URxvt.keysym.M-s: searchable-scrollback:start
		1295
1260	=item B<urlLauncher>: I<string>	1296	=item B<url-launcher>: I<string>
1261		1297
1262	Specifies the program to be started with a URL argument. Used by the	1298	Specifies the program to be started with a URL argument. Used by the
1263	C<selection-popup> and C<matcher> perl extensions.	1299	C<selection-popup> and C<matcher> perl extensions.
1264		1300
1265	=item B<transient-for>: I<windowid>	1301	=item B<transient-for>: I<windowid>
…		…
1269	=item B<override-redirect>: I<boolean>	1305	=item B<override-redirect>: I<boolean>
1270		1306
1271	Compile I<frills>: Sets override-redirect for the terminal window, making	1307	Compile I<frills>: Sets override-redirect for the terminal window, making
1272	it almost invisible to window managers; option B<-override-redirect>.	1308	it almost invisible to window managers; option B<-override-redirect>.
1273		1309
		1310	=item B<iso14755:> I<boolean>
		1311
		1312	Turn on/off ISO 14755 (default enabled).
		1313
1274	=item B<iso14755_52:> I<boolean>	1314	=item B<iso14755_52:> I<boolean>
1275		1315
1276	Turn on/off ISO 14755 5.2 mode (default enabled).	1316	Turn on/off ISO 14755 5.2 mode (default enabled).
		1317
		1318	=back
		1319
		1320	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1321
		1322	=over 4
		1323
		1324	=item B<-pixmap> I<file[;oplist]>
		1325
		1326	=item B<backgroundPixmap:> I<file[;oplist]>
		1327
		1328	Compile I<pixbuf>: Use the specified image file as the window's
		1329	background and also optionally specify a colon separated list of
		1330	operations to modify it. Note that you may need to quote the C<;>
		1331	character when using the command line option, as C<;> is usually a
		1332	metacharacter in shells. Supported operations are:
		1333
		1334	=over 4
		1335
		1336	=item B<WxH+X+Y>
		1337
		1338	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1339	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1340	scale of 0 disables scaling.
		1341
		1342	=item B<op=tile>
		1343
		1344	enables tiling
		1345
		1346	=item B<op=keep-aspect>
		1347
		1348	maintain the image aspect ratio when scaling
		1349
		1350	=item B<op=root-align>
		1351
		1352	use the position of the terminal window relative to the root window as
		1353	the image offset, simulating a root window background
		1354
		1355	=back
		1356
		1357	The default scale and position setting is C<100x100+50+50>.
		1358	Alternatively, a predefined set of templates can be used to achieve
		1359	the most common setups:
		1360
		1361	=over 4
		1362
		1363	=item B<style=tiled>
		1364
		1365	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1366
		1367	=item B<style=aspect-stretched>
		1368
		1369	the image is scaled to fill the whole window maintaining the aspect
		1370	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1371
		1372	=item B<style=stretched>
		1373
		1374	the image is scaled to fill the whole window. Equivalent to 100x100
		1375
		1376	=item B<style=centered>
		1377
		1378	the image is centered with no scaling. Equivalent to 0x0+50+50
		1379
		1380	=item B<style=root-tiled>
		1381
		1382	the image is tiled with no scaling and using 'root' positioning.
		1383	Equivalent to 0x0:op=tile:op=root-align
		1384
		1385	=back
		1386
		1387	If multiple templates are specified the last one wins. Note that a
		1388	template overrides all the scale, position and operations settings.
		1389
		1390	If used in conjunction with pseudo-transparency, the specified pixmap
		1391	will be blended over the transparent background using alpha-blending.
		1392
		1393	=item B<-tr>\|B<+tr>
		1394
		1395	=item B<transparent:> I<boolean>
		1396
		1397	Turn on/off pseudo-transparency by using the root pixmap as background.
		1398
		1399	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1400	will be removed in future versions.
		1401
		1402	=item B<-tint> I<colour>
		1403
		1404	=item B<tintColor:> I<colour>
		1405
		1406	Tint the transparent background with the given colour. Note that a
		1407	black tint yields a completely black image while a white tint yields
		1408	the image unchanged.
		1409
		1410	=item B<-sh> I<number>
		1411
		1412	=item B<shading:> I<number>
		1413
		1414	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1415	A value of 100 means no shading.
		1416
		1417	=item B<-blr> I<HxV>
		1418
		1419	=item B<blurRadius:> I<HxV>
		1420
		1421	Apply gaussian blur with the specified radius to the transparent
		1422	background. If a single number is specified, the vertical and
		1423	horizontal radii are considered to be the same. Setting one of the
		1424	radii to 1 and the other to a large number creates interesting effects
		1425	on some backgrounds. The maximum radius value is 128. An horizontal or
		1426	vertical radius of 0 disables blurring.
		1427
		1428	=item B<path:> I<path>
		1429
		1430	Specify the colon-delimited search path for finding background image files.
1277		1431
1278	=back	1432	=back
1279		1433
1280	=head1 THE SCROLLBAR	1434	=head1 THE SCROLLBAR
1281		1435
…		…
1329	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1483	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1330	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1484	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1331		1485
1332	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1486	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1333	inserted too.	1487	inserted too.
		1488
		1489	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1490	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1491	binding causes the value of the internal selection to be copied to the
		1492	CLIPBOARD selection, while the second binding causes the value of the
		1493	CLIPBOARD selection to be inserted.
1334		1494
1335	=back	1495	=back
1336		1496
1337	=head1 CHANGING FONTS	1497	=head1 CHANGING FONTS
1338		1498
…		…
1420	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1580	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1421	it can be seen via the I<who(1)> command, and can accept messages. To	1581	it can be seen via the I<who(1)> command, and can accept messages. To
1422	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1582	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1423	on some systems or setgid to root or to some other group on others.	1583	on some systems or setgid to root or to some other group on others.
1424		1584
1425	=head1 COLORS AND GRAPHICS	1585	=head1 COLOURS AND GRAPHICS
1426		1586
1427	In addition to the default foreground and background colours,	1587	In addition to the default foreground and background colours,
1428	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1588	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1429	high-intensity bold/blink versions of the same). Here is a list of the	1589	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1430	colours with their names.	1590	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1591	cube plus a 8 (24) colour greyscale ramp.
		1592
		1593	Here is a list of the ANSI colours with their names.
1431		1594
1432	=begin table	1595	=begin table
1433		1596
1434	B<color0> (black) = Black	1597	B<color0> (black) = Black
1435	B<color1> (red) = Red3	1598	B<color1> (red) = Red3
…		…
1455	It is also possible to specify the colour values of B<foreground>,	1618	It is also possible to specify the colour values of B<foreground>,
1456	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1619	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1457	a number 0-15, as a convenient shorthand to reference the colour name of	1620	a number 0-15, as a convenient shorthand to reference the colour name of
1458	color0-color15.	1621	color0-color15.
1459		1622
1460	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1623	The following text gives values for the standard 88 colour mode (and
1461	additional 72 colours. The first 64 of those (with indices 16 to 79)	1624	values for the 256 colour mode in parentheses).
1462	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1463	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1464		1625
		1626	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1627
		1628	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1629	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1630
		1631	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1632	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1633	the RGB cube.
		1634
1465	Together, all those colours implement the 88 colour xterm colours. Only	1635	Together, all those colours implement the 88 (256) colour xterm
1466	the first 16 can be changed using resources currently, the rest can only	1636	colours. Only the first 16 can be changed using resources currently, the
1467	be changed via command sequences ("escape codes").	1637	rest can only be changed via command sequences ("escape codes").
		1638
		1639	Applications are advised to use terminfo or command sequences to discover
		1640	number and RGB values of all colours (yes, you can query this...).
1468		1641
1469	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1642	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1470	always swapping the foreground/background colours. This is in contrast to	1643	always swapping the foreground/background colours. This is in contrast to
1471	I<xterm>(1) where the colours are only swapped if they have not otherwise	1644	I<xterm>(1) where the colours are only swapped if they have not otherwise
1472	been specified. For example,	1645	been specified. For example,
1473		1646
1474	=over 4
1475
1476	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1647	@@RXVT_NAME@@ -fg Black -bg White -rv
1477		1648
1478	would yield White on Black, while on I<xterm>(1) it would yield Black	1649	would yield White on Black, while on I<xterm>(1) it would yield Black on
1479	on White.	1650	White.
1480
1481	=back
1482		1651
1483	=head2 ALPHA CHANNEL SUPPORT	1652	=head2 ALPHA CHANNEL SUPPORT
1484		1653
1485	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1654	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1486	their act together, rxvt-unicode will do it's own alpha channel management:	1655	their act together, rxvt-unicode will do its own alpha channel management:
1487		1656
1488	You can prefix any color with an opaquenes percentage enclosed in	1657	You can prefix any colour with an opaqueness percentage enclosed in
1489	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1658	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1490	(0-100) that specifies the opacity of the color, where C<0> is completely	1659	(0-100) that specifies the opacity of the colour, where C<0> is completely
1491	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1660	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1492	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1661	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1493	is the recommended format to specify transparency values, and works with	1662	is the recommended format to specify transparency values, and works with
1494	all ways to specify a colour.	1663	all ways to specify a colour.
1495		1664
…		…
1573		1742
1574	=item B<SHELL>	1743	=item B<SHELL>
1575		1744
1576	The shell to be used for command execution, defaults to C</bin/sh>.	1745	The shell to be used for command execution, defaults to C</bin/sh>.
1577		1746
1578	=item B<RXVT_SOCKET>	1747	=item B<RXVT_SOCKET> [I<sic>]
1579		1748
1580	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1749	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1581	@@RXVT_NAME@@d(1).	1750	@@RXVT_NAME@@d(1).
1582		1751
1583	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1752	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1753
		1754	=item B<URXVT_PERL_LIB>
		1755
		1756	Additional F<:>-separated library search path for perl extensions. Will be
		1757	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1758	directory.
		1759
		1760	=item B<URXVT_PERL_VERBOSITY>
		1761
		1762	See L<@@RXVT_NAME@@perl>(3).
1584		1763
1585	=item B<HOME>	1764	=item B<HOME>
1586		1765
1587	Used to locate the default directory for the unix domain socket for	1766	Used to locate the default directory for the unix domain socket for
1588	daemon communications and to locate various resource files (such as	1767	daemon communications and to locate various resource files (such as
1589	C<.Xdefaults>)	1768	C<.Xdefaults>)
1590		1769
1591	=item B<XAPPLRESDIR>	1770	=item B<XAPPLRESDIR>
1592		1771
1593	Directory where various X resource files are being located.	1772	Directory where application-specific X resource files are located.
1594		1773
1595	=item B<XENVIRONMENT>	1774	=item B<XENVIRONMENT>
1596		1775
1597	If set and accessible, gives the name of a X resource file to be loaded by	1776	If set and accessible, gives the name of a X resource file to be loaded by
1598	@@RXVT_NAME@@.	1777	@@RXVT_NAME@@.
…		…
1603		1782
1604	=over 4	1783	=over 4
1605		1784
1606	=item B</usr/lib/X11/rgb.txt>	1785	=item B</usr/lib/X11/rgb.txt>
1607		1786
1608	Color names.	1787	Colour names.
1609		1788
1610	=back	1789	=back
1611		1790
1612	=head1 SEE ALSO	1791	=head1 SEE ALSO
1613		1792
		1793	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1614	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1794	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1615		1795
1616	=head1 CURRENT PROJECT COORDINATOR	1796	=head1 CURRENT PROJECT COORDINATOR
1617		1797
1618	=over 4	1798	=over 4
1619		1799
1620	=item Project Coordinator	1800	=item Project Coordinator
1621		1801
1622	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1802	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1623		1803
1624	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1804	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1625		1805
1626	=back	1806	=back
1627		1807
…		…
1631		1811
1632	=item John Bovey	1812	=item John Bovey
1633		1813
1634	University of Kent, 1992, wrote the original Xvt.	1814	University of Kent, 1992, wrote the original Xvt.
1635		1815
1636	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1816	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1637		1817
1638	very heavily modified Xvt and came up with Rxvt	1818	very heavily modified Xvt and came up with Rxvt
1639		1819
1640	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1820	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1641		1821
1642	wrote the Greek Keyboard Input (no longer in code)	1822	wrote the Greek Keyboard Input (no longer in code)
1643		1823
1644	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1824	=item mj olesen <olesen@me.QueensU.CA>
1645		1825
1646	Wrote the menu system.	1826	Wrote the menu system.
1647		1827
1648	Project Coordinator (changes.txt 2.11 to 2.21)	1828	Project Coordinator (changes.txt 2.11 to 2.21)
1649		1829
1650	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1830	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1651		1831
1652	Project Coordinator (changes.txt 2.21a to 2.4.5)	1832	Project Coordinator (changes.txt 2.21a to 2.4.5)
1653		1833
1654	=item Geoff Wing L<< <gcw@pobox.com> >>	1834	=item Geoff Wing <gcw@pobox.com>
1655		1835
1656	Rewrote screen display and text selection routines.	1836	Rewrote screen display and text selection routines.
1657		1837
1658	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1838	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1659		1839
1660	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1840	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1661		1841
1662	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1842	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1663	extension, random hacks, numerous bugfixes and extensions.	1843	extension, random hacks, numerous bugfixes and extensions.
1664		1844
1665	Project Coordinator (Changes 1.0 -)	1845	Project Coordinator (Changes 1.0 -)
1666		1846
1667	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1847	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1668		1848
1669	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1849	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1670		1850
1671	=back	1851	=back
1672		1852

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs. Revision 1.240 by sf-exg, Mon Oct 13 17:05:32 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.240 by sf-exg, Mon Oct 13 17:05:32 2014 UTC