[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.170 by root, Sat May 30 08:51:23 2009 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
321		275
322	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
323		277
324	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
325		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
326	=item B<-iconic>	284	=item B<-iconic>
327		285
328	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
329	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
330		288
…		…
353		311
354	=item B<-override-redirect>	312	=item B<-override-redirect>
355		313
356	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
357	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
358		321
359	=item B<-sbg>	322	=item B<-sbg>
360		323
361	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
362	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
417	=item B<-pt> I<style>	380	=item B<-pt> I<style>
418		381
419	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
420	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
421		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
422	=item B<-im> I<text>	388	=item B<-im> I<text>
423		389
424	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
425		391
426	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
567	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
568	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
569	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
570	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
571		537
572	1. system-wide app-defaults file, either locale-dependent OR global
573	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
574	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
575	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
576	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
577	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
578		544
579	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
580	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
621	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
622	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
623	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
624	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
625	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
626	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
627		593
628	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
629	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
630		596
631	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
642	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
643		609
644	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
645	foreground colour is the default.	611	foreground colour is the default.
646		612
647	=item B<colorRV:> I<colour>
648
649	Use the specified colour as the background for reverse video characters
650	when OPTION_HC is disabled (--disable-frills).
651
652	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
653		614
654	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
655	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
656		627
657	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
658		629
659	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
660	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
667		638
668	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
669		640
670	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
671	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
672	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
673		644
674	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
675		646
676	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
677	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
691		662
692	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
693	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
694	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
695		666
696	=item B<transparent:> I<boolean>
697
698	Turn on/off illusion of a transparent window background.
699
700	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
701	future versions.
702
703	I<Please address all transparency related issues to Sasha Vasko at
704	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
705
706	=item B<fading:> I<number>	667	=item B<fading:> I<number>
707		668
708	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
709		670
710	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
711		672
712	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
713	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
714		675
715	=item B<tintColor:> I<colour>
716
717	Tint the transparent background pixmap with the given colour; option
718	B<-tint>.
719
720	=item B<shading:> I<number>
721
722	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
723	in addition to tinting it; option B<-sh>.
724
725	=item B<blendType:> I<string>
726
727	Specify background blending type; option B<-blt>.
728
729	=item B<blurRadius:> I<number>
730
731	Apply gaussian blur with the specified radius to the transparent
732	background image; option B<-blr>.
733
734	=item B<iconFile:> I<file>	676	=item B<iconFile:> I<file>
735		677
736	Set the application icon pixmap; option B<-icon>.	678	Set the application icon pixmap; option B<-icon>.
737		679
738	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
…		…
746		688
747	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
748		690
749	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
750	and the text.	692	and the text.
751
752	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
753
754	Use the specified image file for the background and also
755	optionally specify its scaling with a geometry string B<WxH+X+Y>,
756	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
757	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
758	centre (percent). A scale of 0 displays the image with tiling. A scale
759	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
760	an integer number of images in that direction. No image will be magnified
761	beyond 10 times its original size. The maximum permitted scale is 1000.
762	Additional operations can be specified after colon B<:op1:op2...>.
763	Supported operations are:
764
765	tile force background image to be tiled and not scaled. Equivalent to 0x0
766	propscale will scale image keeping proportions
767	auto will scale image to match window size. Equivalent to 100x100
768	hscale will scale image horizontally to the window size
769	vscale will scale image vertically to the window size
770	scale will scale image to match window size
771	root will tile image as if it was a root window background, auto-adjusting
772	whenever terminal window moves
773
774	If used in conjunction with B<-tr> option, the specified pixmap will be
775	blended over transparency image using either alpha-blending, or any
776	other blending type, specified with B<-blt "type"> option.
777
778	=item B<path:> I<path>
779
780	Specify the colon-delimited search path for finding background image files.
781		693
782	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
783		695
784	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
785	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
808	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
809	wide and 15 pixels high.	721	wide and 15 pixels high.
810		722
811	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
812	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
813	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
814	useful supplement.	726	useful supplement.
815		727
816	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
817	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
818	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
882		794
883	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
884	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
885	[default]; option B<+ls>.	797	[default]; option B<+ls>.
886		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
887	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
888		805
889	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
890	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
891	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
908	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
909		826
910	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
911	the author's favourite.	828	the author's favourite.
912		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
913	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
914		835
915	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
916	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
917		838
…		…
936	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
937	B<+si>.	858	B<+si>.
938		859
939	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
940		861
941	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
942	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
943	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
944		866
945	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
946		868
947	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
948	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
949	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
950	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
951		873
952	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
953		875
954	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
955	resource is limited on most machines to 65535; option B<-sl>.
956		877
957	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
958		879
959	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
960	option B<-b>.	881	option B<-b>.
…		…
1004	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
1005		926
1006	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
1007	option B<-bc>.	928	option B<-bc>.
1008		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
		934
1009	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
1010		936
1011	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
1012	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
1013	[default].	939	[default].
…		…
1018		944
1019	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
1020		946
1021	Mouse pointer background colour.	947	Mouse pointer background colour.
1022		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
1023	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
1024		956
1025	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
1026	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
1027		959
1028	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
1029		961
1030	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
1031	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1032	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
1033	escape sequence.	965	escape sequence.
1034		966
1035	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
1036		968
…		…
1053		985
1054	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1055		987
1056	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
1057		989
1058	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1059		991
1060	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1061		993
1062	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1063		995
…		…
1132	Sets the working directory for the shell (or the command specified via	1064	Sets the working directory for the shell (or the command specified via
1133	B<-e>). The I<path> must be an absolute path and it must exist for	1065	B<-e>). The I<path> must be an absolute path and it must exist for
1134	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1135	directory will be used; option B<-cd>.	1067	directory will be used; option B<-cd>.
1136		1068
1137	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1138		1070
1139	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1140	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1141		1073
1142	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1143	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1144	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1145	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1146	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1085	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1086	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1087	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1147		1088
1148	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1089	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1149	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1090	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1150	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1091	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1151	current application keymap mode state.	1092	current application keymap mode state.
1152		1093
1153	The spellings of I<key> can be obtained by using B<xev>(1) command or	1094	Due the the large number of modifier combinations, a key mapping will
1154	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1095	match if I<at least> the specified identifiers are being set, and no other
		1096	key mappings with those and more bits are being defined. That means that
		1097	defining a mapping for C<a> will automatically provide definitions for
		1098	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1099	themselves. See the C<builtin:> action, below, for a way to work around
		1100	this when this is a problem.
		1101
		1102	The spelling of I<key> depends on your implementation of X. An easy way to
		1103	find a key name is to use the B<xev>(1) command. You can find a list by
		1104	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1155	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1105	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1156	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1106	value (B<0x0000 - 0xFFFF>).
1157	performed in an exact manner; however, the closest match is assured.
1158		1107
1159	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1108	As with any resource value, the I<action> string may contain backslash
		1109	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1160	number), see RESOURCES in C<man 7 X> for futher details.	1110	number), see RESOURCES in C<man 7 X> for further details.
1161		1111
1162	You can define a range of keysyms in one shot by providing a I<string>	1112	An action starts with an action prefix that selects a certain type
1163	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1113	of action, followed by a colon. An action string without colons is
		1114	interpreted as a literal string to pass to the tty (as if it was
		1115	prefixed with C<string:>).
		1116
		1117	The following action prefixes are known - extensions can provide
		1118	additional prefixes:
		1119
		1120	=over 4
		1121
		1122	=item string:STRING
		1123
		1124	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1125	then the remaining C<STRING> will be passed to the program running in the
		1126	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1127	string C<echo rm -rf /> followed by a newline:
		1128
		1129	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1130
		1131	This could in theory be used to completely redefine your keymap.
		1132
		1133	In addition, for actions of this type, you can define a range of
		1134	keysyms in one shot by loading the C<keysym-list> perl extension and
		1135	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1164	should be a character not used by the strings.	1136	the delimiter `/' should be a character not used by the strings.
1165		1137
1166	Its usage can be demonstrated by an example:	1138	Its usage can be demonstrated by an example:
1167		1139
1168	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1140	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1169		1141
1170	The above line is equivalent to the following three lines:	1142	The above line is equivalent to the following three lines:
1171		1143
1172	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1144	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1173	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1145	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1174	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1146	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1175		1147
		1148	=item command:STRING
		1149
1176	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1150	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1177	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1151	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1152	the opposite of C<string:> - instead of sending it to the program running
		1153	in the terminal, it will be treated as if it were program output). This is
		1154	most useful to feed command sequences into @@RXVT_NAME@@.
		1155
1178	example the following means "change the current locale to C<zh_CN.GBK>	1156	For example the following means "change the current locale to C<zh_CN.GBK>
1179	when Control-Meta-c is being pressed":	1157	when Control-Meta-c is being pressed":
1180		1158
1181	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1159	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1182		1160
1183	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1161	The following example will map Control-Meta-1 and Control-Meta-2 to
1184	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1162	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1185	manpage. For example, the F<selection> extension (activated via	1163	font-switching at runtime:
1186	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1187		1164
1188	URxvt.keysym.M-C-c: perl:selection:rot13	1165	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1166	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1189		1167
1190	Due the the large number of modifier combinations, a defined key mapping	1168	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1191	will match if at I<at least> the specified identifiers are being set, and	1169	info):
1192	no other key mappings with those and more bits are being defined. That
1193	means that defining a key map for C<a> will automatically provide
1194	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1195	mappings themselves.
1196		1170
1197	Unfortunately, this will override built-in key mappings. For example	1171	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1172	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1173
		1174	=item builtin:
		1175
		1176	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1177	key binding existed for the key combination. The obvious use is to undo
		1178	the effect of existing bindings. The not so obvious use is to reinstate
		1179	bindings when another binding overrides too many modifiers.
		1180
1198	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1181	For example if you overwrite the C<Insert> key you will disable
1199	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1182	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1200	user-defined keymap using the C<builtin:> replacement:	1183	"holes" into the user-defined keymap using the C<builtin:> replacement:
1201		1184
1202	URxvt.keysym.Insert: <my insert key sequence>	1185	URxvt.keysym.Insert: <my insert key sequence>
1203	URxvt.keysym.S-Insert: builtin:	1186	URxvt.keysym.S-Insert: builtin:
1204		1187
1205	The first line defines a mapping for C<Insert> and I<any> combination	1188	The first line defines a mapping for C<Insert> and I<any> combination
1206	of modifiers. The second line re-establishes the default mapping for	1189	of modifiers. The second line re-establishes the default mapping for
1207	C<Shift-Insert>.	1190	C<Shift-Insert>.
1208		1191
1209	The following example will map Control-Meta-1 and Control-Meta-2 to	1192	=item builtin-string:
1210	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1211	font-switching at runtime:
1212		1193
1213	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1194	This action is mainly useful to restore string mappings for keys that
1214	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1195	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1196	difficult to explain - basically, this action will send the string to the
		1197	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1198	action for it.
1215		1199
1216	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1200	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1217	info):	1201	selection when you press C<Shift-Insert>. With the following bindings, it
		1202	would instead emit the (undocumented, but what applications running in the
		1203	terminal might expect) sequence C<ESC [ 2 $> instead:
1218		1204
1219	URxvt.keysym.M-C-3: command:\033[8;25;80t	1205	URxvt.keysym.S-Insert: builtin-string:
1220	URxvt.keysym.M-C-4: command:\033[8;48;110t	1206	URxvt.keysym.C-S-Insert: builtin:
		1207
		1208	The first line disables the paste functionality for that key
		1209	combination, and the second reinstates the default behaviour for
		1210	C<Control-Shift-Insert>, which would otherwise be overridden.
		1211
		1212	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1213	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1214	this:
		1215
		1216	URxvt.keysym.C-M-c: builtin-string:
		1217	URxvt.keysym.C-M-v: builtin-string:
		1218
		1219	=item EXTENSION:STRING
		1220
		1221	An action of this form invokes the action B<STRING>, if any, provided
		1222	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1223	be loaded automatically if necessary.
		1224
		1225	Not all extensions define actions, but popular extensions that do
		1226	include the I<selection> and I<matcher> extensions (documented in their
		1227	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1228	respectively).
		1229
		1230	From the silly examples department, this will rot13-"encrypt"
		1231	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1232	keyboards:
		1233
		1234	URxvt.keysym.M-C-c: selection:rot13
		1235
		1236	=item perl:STRING DEPRECATED
		1237
		1238	This is a deprecated way of invoking commands provided by perl
		1239	extensions. It is still supported, but should not be used anymore.
		1240
		1241	=back
1221		1242
1222	=item B<perl-ext-common>: I<string>	1243	=item B<perl-ext-common>: I<string>
1223		1244
1224	=item B<perl-ext>: I<string>	1245	=item B<perl-ext>: I<string>
1225		1246
…		…
1227	use in this terminal instance; option B<-pe>.	1248	use in this terminal instance; option B<-pe>.
1228		1249
1229	Extension names can be prefixed with a C<-> sign to prohibit using	1250	Extension names can be prefixed with a C<-> sign to prohibit using
1230	them. This can be useful to selectively disable some extensions loaded	1251	them. This can be useful to selectively disable some extensions loaded
1231	by default, or specified via the C<perl-ext-common> resource. For	1252	by default, or specified via the C<perl-ext-common> resource. For
1232	example, C<default,-selection> will use all the default extension except	1253	example, C<default,-selection> will use all the default extensions except
1233	C<selection>.	1254	C<selection>.
1234		1255
1235	Extension names can also be followed by an argument in angle brackets	1256	The default set includes the C<selection>, C<option-popup>,
1236	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1257	C<selection-popup>, C<readline> and C<searchable-scrollback>
1237	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1258	extensions, and extensions which are mentioned in B<keysym> resources.
1238	multiple times with different arguments will pass multiple arguments to	1259
1239	the extension.	1260	Any extension such that a corresponding resource is given on the
		1261	command line is automatically appended to B<perl-ext>.
1240		1262
1241	Each extension is looked up in the library directories, loaded if	1263	Each extension is looked up in the library directories, loaded if
1242	necessary, and bound to the current terminal instance.	1264	necessary, and bound to the current terminal instance. When the library
		1265	search path contains multiple extension files of the same name, then the
		1266	first one found will be used.
1243		1267
1244	If both of these resources are the empty string, then the perl	1268	If both of these resources are the empty string, then the perl interpreter
1245	interpreter will not be initialized. The idea behind two options is that	1269	will not be initialized. The rationale for having two options is that
1246	B<perl-ext-common> will be used for extensions that should be available to	1270	B<perl-ext-common> will be used for extensions that should be available to
1247	all instances, while B<perl-ext> is used for specific instances.	1271	all instances, while B<perl-ext> is used for specific instances.
1248		1272
1249	=item B<perl-eval>: I<string>	1273	=item B<perl-eval>: I<string>
1250		1274
…		…
1252	the @@RXVT_NAME@@perl(3) manpage.	1276	the @@RXVT_NAME@@perl(3) manpage.
1253		1277
1254	=item B<perl-lib>: I<path>	1278	=item B<perl-lib>: I<path>
1255		1279
1256	Colon-separated list of additional directories that hold extension	1280	Colon-separated list of additional directories that hold extension
1257	scripts. When looking for extensions specified by the C<perl> resource,	1281	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1258	@@RXVT_NAME@@ will first look in these directories and then in	1282	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1259	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1283	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1260		1284
1261	See the @@RXVT_NAME@@perl(3) manpage.	1285	See the @@RXVT_NAME@@perl(3) manpage.
1262		1286
1263	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1287	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1264		1288
…		…
1268	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1292	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1269		1293
1270	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1294	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1271	for details.	1295	for details.
1272		1296
1273	=item B<searchable-scrollback:> I<keysym>	1297	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1274		1298
1275	Sets the hotkey that starts the incremental scrollback buffer search	1299	This resource is deprecated and will be removed. Use a B<keysym> resource
1276	(default: C<M-s>).	1300	instead, e.g.:
1277		1301
		1302	URxvt.keysym.M-s: searchable-scrollback:start
		1303
1278	=item B<urlLauncher>: I<string>	1304	=item B<url-launcher>: I<string>
1279		1305
1280	Specifies the program to be started with a URL argument. Used by the	1306	Specifies the program to be started with a URL argument. Used by the
1281	C<selection-popup> and C<matcher> perl extensions.	1307	C<selection-popup> and C<matcher> perl extensions.
1282		1308
1283	=item B<transient-for>: I<windowid>	1309	=item B<transient-for>: I<windowid>
…		…
1286		1312
1287	=item B<override-redirect>: I<boolean>	1313	=item B<override-redirect>: I<boolean>
1288		1314
1289	Compile I<frills>: Sets override-redirect for the terminal window, making	1315	Compile I<frills>: Sets override-redirect for the terminal window, making
1290	it almost invisible to window managers; option B<-override-redirect>.	1316	it almost invisible to window managers; option B<-override-redirect>.
		1317
		1318	=item B<iso14755:> I<boolean>
		1319
		1320	Turn on/off ISO 14755 (default enabled).
1291		1321
1292	=item B<iso14755_52:> I<boolean>	1322	=item B<iso14755_52:> I<boolean>
1293		1323
1294	Turn on/off ISO 14755 5.2 mode (default enabled).	1324	Turn on/off ISO 14755 5.2 mode (default enabled).
1295		1325
…		…
1347	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1377	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1348	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1378	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1349		1379
1350	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1380	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1351	inserted too.	1381	inserted too.
		1382
		1383	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1384	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1385	binding causes the value of the internal selection to be copied to the
		1386	CLIPBOARD selection, while the second binding causes the value of the
		1387	CLIPBOARD selection to be inserted.
1352		1388
1353	=back	1389	=back
1354		1390
1355	=head1 CHANGING FONTS	1391	=head1 CHANGING FONTS
1356		1392
…		…
1438	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1474	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1439	it can be seen via the I<who(1)> command, and can accept messages. To	1475	it can be seen via the I<who(1)> command, and can accept messages. To
1440	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1476	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1441	on some systems or setgid to root or to some other group on others.	1477	on some systems or setgid to root or to some other group on others.
1442		1478
1443	=head1 COLORS AND GRAPHICS	1479	=head1 COLOURS AND GRAPHICS
1444		1480
1445	In addition to the default foreground and background colours,	1481	In addition to the default foreground and background colours,
1446	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1482	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1447	high-intensity bold/blink versions of the same). Here is a list of the	1483	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1448	colours with their names.	1484	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1485	cube plus a 8 (24) colour greyscale ramp.
		1486
		1487	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1488	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1489	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1490	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1491	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1492	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1493	use many similar 24-bit colours. It's typically not a problem in common
		1494	scenarios.
		1495
		1496	Here is a list of the ANSI colours with their names.
1449		1497
1450	=begin table	1498	=begin table
1451		1499
1452	B<color0> (black) = Black	1500	B<color0> (black) = Black
1453	B<color1> (red) = Red3	1501	B<color1> (red) = Red3
…		…
1473	It is also possible to specify the colour values of B<foreground>,	1521	It is also possible to specify the colour values of B<foreground>,
1474	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1522	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1475	a number 0-15, as a convenient shorthand to reference the colour name of	1523	a number 0-15, as a convenient shorthand to reference the colour name of
1476	color0-color15.	1524	color0-color15.
1477		1525
1478	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1526	The following text gives values for the standard 88 colour mode (and
1479	additional 72 colours. The first 64 of those (with indices 16 to 79)	1527	values for the 256 colour mode in parentheses).
1480	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1481	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1482		1528
		1529	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1530
		1531	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1532	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1533
		1534	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1535	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1536	the RGB cube.
		1537
1483	Together, all those colours implement the 88 colour xterm colours. Only	1538	Together, all those colours implement the 88 (256) colour xterm
1484	the first 16 can be changed using resources currently, the rest can only	1539	colours. Only the first 16 can be changed using resources currently, the
1485	be changed via command sequences ("escape codes").	1540	rest can only be changed via command sequences ("escape codes").
		1541
		1542	Applications are advised to use terminfo or command sequences to discover
		1543	number and RGB values of all colours (yes, you can query this...).
1486		1544
1487	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1545	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1488	always swapping the foreground/background colours. This is in contrast to	1546	always swapping the foreground/background colours. This is in contrast to
1489	I<xterm>(1) where the colours are only swapped if they have not otherwise	1547	I<xterm>(1) where the colours are only swapped if they have not otherwise
1490	been specified. For example,	1548	been specified. For example,
1491		1549
1492	=over 4
1493
1494	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1550	@@RXVT_NAME@@ -fg Black -bg White -rv
1495		1551
1496	would yield White on Black, while on I<xterm>(1) it would yield Black	1552	would yield White on Black, while on I<xterm>(1) it would yield Black on
1497	on White.	1553	White.
1498
1499	=back
1500		1554
1501	=head2 ALPHA CHANNEL SUPPORT	1555	=head2 ALPHA CHANNEL SUPPORT
1502		1556
1503	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1557	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1504	their act together, rxvt-unicode will do it's own alpha channel management:	1558	their act together, rxvt-unicode will do its own alpha channel management:
1505		1559
1506	You can prefix any color with an opaquenes percentage enclosed in	1560	You can prefix any colour with an opaqueness percentage enclosed in
1507	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1561	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1508	(0-100) that specifies the opacity of the color, where C<0> is completely	1562	(0-100) that specifies the opacity of the colour, where C<0> is completely
1509	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1563	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1510	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1564	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1511	is the recommended format to specify transparency values, and works with	1565	is the recommended format to specify transparency values, and works with
1512	all ways to specify a colour.	1566	all ways to specify a colour.
1513		1567
…		…
1591		1645
1592	=item B<SHELL>	1646	=item B<SHELL>
1593		1647
1594	The shell to be used for command execution, defaults to C</bin/sh>.	1648	The shell to be used for command execution, defaults to C</bin/sh>.
1595		1649
1596	=item B<RXVT_SOCKET>	1650	=item B<RXVT_SOCKET> [I<sic>]
1597		1651
1598	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1652	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1599	@@RXVT_NAME@@d(1).	1653	@@RXVT_NAME@@d(1).
1600		1654
1601	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1655	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1656
		1657	=item B<URXVT_PERL_LIB>
		1658
		1659	Additional F<:>-separated library search path for perl extensions. Will be
		1660	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1661	directory.
		1662
		1663	=item B<URXVT_PERL_VERBOSITY>
		1664
		1665	See L<@@RXVT_NAME@@perl>(3).
1602		1666
1603	=item B<HOME>	1667	=item B<HOME>
1604		1668
1605	Used to locate the default directory for the unix domain socket for	1669	Used to locate the default directory for the unix domain socket for
1606	daemon communications and to locate various resource files (such as	1670	daemon communications and to locate various resource files (such as
1607	C<.Xdefaults>)	1671	C<.Xdefaults>)
1608		1672
1609	=item B<XAPPLRESDIR>	1673	=item B<XAPPLRESDIR>
1610		1674
1611	Directory where various X resource files are being located.	1675	Directory where application-specific X resource files are located.
1612		1676
1613	=item B<XENVIRONMENT>	1677	=item B<XENVIRONMENT>
1614		1678
1615	If set and accessible, gives the name of a X resource file to be loaded by	1679	If set and accessible, gives the name of a X resource file to be loaded by
1616	@@RXVT_NAME@@.	1680	@@RXVT_NAME@@.
…		…
1621		1685
1622	=over 4	1686	=over 4
1623		1687
1624	=item B</usr/lib/X11/rgb.txt>	1688	=item B</usr/lib/X11/rgb.txt>
1625		1689
1626	Color names.	1690	Colour names.
1627		1691
1628	=back	1692	=back
1629		1693
1630	=head1 SEE ALSO	1694	=head1 SEE ALSO
1631		1695
		1696	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1632	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1697	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1633		1698
1634	=head1 CURRENT PROJECT COORDINATOR	1699	=head1 CURRENT PROJECT COORDINATOR
1635		1700
1636	=over 4	1701	=over 4
1637		1702
1638	=item Project Coordinator	1703	=item Project Coordinator
1639		1704
1640	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1705	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1641		1706
1642	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1707	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1643		1708
1644	=back	1709	=back
1645		1710
…		…
1649		1714
1650	=item John Bovey	1715	=item John Bovey
1651		1716
1652	University of Kent, 1992, wrote the original Xvt.	1717	University of Kent, 1992, wrote the original Xvt.
1653		1718
1654	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1719	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1655		1720
1656	very heavily modified Xvt and came up with Rxvt	1721	very heavily modified Xvt and came up with Rxvt
1657		1722
1658	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1723	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1659		1724
1660	wrote the Greek Keyboard Input (no longer in code)	1725	wrote the Greek Keyboard Input (no longer in code)
1661		1726
1662	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1727	=item mj olesen <olesen@me.QueensU.CA>
1663		1728
1664	Wrote the menu system.	1729	Wrote the menu system.
1665		1730
1666	Project Coordinator (changes.txt 2.11 to 2.21)	1731	Project Coordinator (changes.txt 2.11 to 2.21)
1667		1732
1668	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1733	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1669		1734
1670	Project Coordinator (changes.txt 2.21a to 2.4.5)	1735	Project Coordinator (changes.txt 2.21a to 2.4.5)
1671		1736
1672	=item Geoff Wing L<< <gcw@pobox.com> >>	1737	=item Geoff Wing <gcw@pobox.com>
1673		1738
1674	Rewrote screen display and text selection routines.	1739	Rewrote screen display and text selection routines.
1675		1740
1676	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1741	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1677		1742
1678	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1743	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1679		1744
1680	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1745	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1681	extension, random hacks, numerous bugfixes and extensions.	1746	extension, random hacks, numerous bugfixes and extensions.
1682		1747
1683	Project Coordinator (Changes 1.0 -)	1748	Project Coordinator (Changes 1.0 -)
1684		1749
1685	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1750	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1686		1751
1687	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1752	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1688		1753
1689	=back	1754	=back
1690		1755

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.170 by root, Sat May 30 08:51:23 2009 UTC vs. Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.170 by root, Sat May 30 08:51:23 2009 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC