[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.171 by root, Sat May 30 08:53:48 2009 UTC vs.
Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
357		311
358	=item B<-override-redirect>	312	=item B<-override-redirect>
359		313
360	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
361	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
362		321
363	=item B<-sbg>	322	=item B<-sbg>
364		323
365	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
366	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
571	You can set and change the resources using X11 tools like B<xrdb>. Many	530	You can set and change the resources using X11 tools like B<xrdb>. Many
572	distribution do also load settings from the B<~/.Xresources> file when X	531	distribution do also load settings from the B<~/.Xresources> file when X
573	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	532	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
574	with later settings overwriting earlier ones:	533	with later settings overwriting earlier ones:
575		534
576	1. system-wide app-defaults file, either locale-dependent OR global
577	2. app-defaults file in $XAPPLRESDIR	535	1. app-defaults file in $XAPPLRESDIR
		536	2. $HOME/.Xdefaults
578	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	537	3. RESOURCE_MANAGER property on root-window of screen 0
579	4. SCREEN_RESOURCES for the current screen	538	4. SCREEN_RESOURCES property on root-window of the current screen
580	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	539	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
581	6. resources specified via -xrm on the commandline	540	6. resources specified via -xrm on the commandline
582		541
583	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	542	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
584	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	543	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
625	Use the specified colour for the colour value I<n>, where 0-7	584	Use the specified colour for the colour value I<n>, where 0-7
626	corresponds to low-intensity (normal) colours and 8-15 corresponds to	585	corresponds to low-intensity (normal) colours and 8-15 corresponds to
627	high-intensity (bold = bright foreground, blink = bright background)	586	high-intensity (bold = bright foreground, blink = bright background)
628	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	587	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
629	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	588	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
630	names used are listed in the B<COLORS AND GRAPHICS> section.	589	names used are listed in the B<COLOURS AND GRAPHICS> section.
631		590
632	Colours higher than 15 cannot be set using resources (yet), but can be	591	Colours higher than 15 cannot be set using resources (yet), but can be
633	changed using an escape command (see @@RXVT_NAME@@(7)).	592	changed using an escape command (see @@RXVT_NAME@@(7)).
634		593
635	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	594	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
646	=item B<colorUL:> I<colour>	605	=item B<colorUL:> I<colour>
647		606
648	Use the specified colour to display underlined characters when the	607	Use the specified colour to display underlined characters when the
649	foreground colour is the default.	608	foreground colour is the default.
650		609
651	=item B<colorRV:> I<colour>
652
653	Use the specified colour as the background for reverse video characters
654	when OPTION_HC is disabled (--disable-frills).
655
656	=item B<underlineColor:> I<colour>	610	=item B<underlineColor:> I<colour>
657		611
658	If set, use the specified colour as the colour for the underline	612	If set, use the specified colour as the colour for the underline
659	itself. If unset, use the foreground colour.	613	itself. If unset, use the foreground colour.
		614
		615	=item B<highlightColor:> I<colour>
		616
		617	If set, use the specified colour as the background for highlighted
		618	characters. If unset, use reverse video.
		619
		620	=item B<highlightTextColor:> I<colour>
		621
		622	If set and highlightColor is set, use the specified colour as the
		623	foreground for highlighted characters.
660		624
661	=item B<cursorColor:> I<colour>	625	=item B<cursorColor:> I<colour>
662		626
663	Use the specified colour for the cursor. The default is to use the	627	Use the specified colour for the cursor. The default is to use the
664	foreground colour; option B<-cr>.	628	foreground colour; option B<-cr>.
…		…
671		635
672	=item B<reverseVideo:> I<boolean>	636	=item B<reverseVideo:> I<boolean>
673		637
674	B<True>: simulate reverse video by foreground and background colours;	638	B<True>: simulate reverse video by foreground and background colours;
675	option B<-rv>. B<False>: regular screen colours [default]; option	639	option B<-rv>. B<False>: regular screen colours [default]; option
676	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	640	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
677		641
678	=item B<jumpScroll:> I<boolean>	642	=item B<jumpScroll:> I<boolean>
679		643
680	B<True>: specify that jump scrolling should be used. When receiving lots	644	B<True>: specify that jump scrolling should be used. When receiving lots
681	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	645	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
695		659
696	B<False>: specify that everything is to be displayed, even	660	B<False>: specify that everything is to be displayed, even
697	if the refresh is too fast for the human eye to read anything (or the	661	if the refresh is too fast for the human eye to read anything (or the
698	monitor to display anything); option B<+ss>.	662	monitor to display anything); option B<+ss>.
699		663
700	=item B<transparent:> I<boolean>
701
702	Turn on/off illusion of a transparent window background.
703
704	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
705	future versions.
706
707	I<Please address all transparency related issues to Sasha Vasko at
708	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
709
710	=item B<fading:> I<number>	664	=item B<fading:> I<number>
711		665
712	Fade the text by the given percentage when focus is lost; option B<-fade>.	666	Fade the text by the given percentage when focus is lost; option B<-fade>.
713		667
714	=item B<fadeColor:> I<colour>	668	=item B<fadeColor:> I<colour>
715		669
716	Fade to this colour, when fading is used (see B<fading:>). The default	670	Fade to this colour, when fading is used (see B<fading:>). The default
717	colour is black; option B<-fadecolor>.	671	colour is black; option B<-fadecolor>.
718		672
719	=item B<tintColor:> I<colour>
720
721	Tint the transparent background pixmap with the given colour; option
722	B<-tint>.
723
724	=item B<shading:> I<number>
725
726	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
727	in addition to tinting it; option B<-sh>.
728
729	=item B<blendType:> I<string>
730
731	Specify background blending type; option B<-blt>.
732
733	=item B<blurRadius:> I<number>
734
735	Apply gaussian blur with the specified radius to the transparent
736	background image; option B<-blr>.
737
738	=item B<iconFile:> I<file>	673	=item B<iconFile:> I<file>
739		674
740	Set the application icon pixmap; option B<-icon>.	675	Set the application icon pixmap; option B<-icon>.
741		676
742	=item B<scrollColor:> I<colour>	677	=item B<scrollColor:> I<colour>
…		…
750		685
751	=item B<borderColor:> I<colour>	686	=item B<borderColor:> I<colour>
752		687
753	The colour of the border around the text area and between the scrollbar	688	The colour of the border around the text area and between the scrollbar
754	and the text.	689	and the text.
755
756	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
757
758	Use the specified image file for the background and also
759	optionally specify its scaling with a geometry string B<WxH+X+Y>,
760	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
761	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
762	centre (percent). A scale of 0 displays the image with tiling. A scale
763	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
764	an integer number of images in that direction. No image will be magnified
765	beyond 10 times its original size. The maximum permitted scale is 1000.
766	Additional operations can be specified after colon B<:op1:op2...>.
767	Supported operations are:
768
769	tile force background image to be tiled and not scaled. Equivalent to 0x0
770	propscale will scale image keeping proportions
771	auto will scale image to match window size. Equivalent to 100x100
772	hscale will scale image horizontally to the window size
773	vscale will scale image vertically to the window size
774	scale will scale image to match window size
775	root will tile image as if it was a root window background, auto-adjusting
776	whenever terminal window moves
777
778	If used in conjunction with B<-tr> option, the specified pixmap will be
779	blended over transparency image using either alpha-blending, or any
780	other blending type, specified with B<-blt "type"> option.
781
782	=item B<path:> I<path>
783
784	Specify the colon-delimited search path for finding background image files.
785		690
786	=item B<font:> I<fontlist>	691	=item B<font:> I<fontlist>
787		692
788	Select the fonts to be used. This is a comma separated list of font names	693	Select the fonts to be used. This is a comma separated list of font names
789	that are checked in order when trying to find glyphs for characters. The	694	that are checked in order when trying to find glyphs for characters. The
…		…
812	it is named first) and thus defines the character cell grid to be 9 pixels	717	it is named first) and thus defines the character cell grid to be 9 pixels
813	wide and 15 pixels high.	718	wide and 15 pixels high.
814		719
815	The second font is just used to add additional unicode characters not in	720	The second font is just used to add additional unicode characters not in
816	the base font, likewise the third, which is unfortunately non-bold, but	721	the base font, likewise the third, which is unfortunately non-bold, but
817	the bold version of the font does contain less characters, so this is a	722	the bold version of the font does contain fewer characters, so this is a
818	useful supplement.	723	useful supplement.
819		724
820	The third font is an Xft font with aliasing turned off, and the characters	725	The third font is an Xft font with aliasing turned off, and the characters
821	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	726	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
822	contains other characters, but we are not interested in them.	727	contains other characters, but we are not interested in them.
…		…
886		791
887	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	792	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
888	the shell; option B<-ls>. B<False>: start as a normal sub-shell	793	the shell; option B<-ls>. B<False>: start as a normal sub-shell
889	[default]; option B<+ls>.	794	[default]; option B<+ls>.
890		795
		796	=item B<multiClickTime:> I<number>
		797
		798	Specify the maximum time in milliseconds between multi-click select
		799	events. The default is 500 milliseconds; option B<-mc>.
		800
891	=item B<utmpInhibit:> I<boolean>	801	=item B<utmpInhibit:> I<boolean>
892		802
893	B<True>: inhibit writing record into the system log file B<utmp>;	803	B<True>: inhibit writing record into the system log file B<utmp>;
894	option B<-ut>. B<False>: write record into the system log file B<utmp>	804	option B<-ut>. B<False>: write record into the system log file B<utmp>
895	[default]; option B<+ut>.	805	[default]; option B<+ut>.
…		…
912	=item B<scrollstyle:> I<mode>	822	=item B<scrollstyle:> I<mode>
913		823
914	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	824	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
915	the author's favourite.	825	the author's favourite.
916		826
		827	=item B<thickness:> I<number>
		828
		829	Set the scrollbar width in pixels.
		830
917	=item B<scrollBar:> I<boolean>	831	=item B<scrollBar:> I<boolean>
918		832
919	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	833	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
920	disable the scrollbar; option B<+sb>.	834	disable the scrollbar; option B<+sb>.
921		835
…		…
940	B<False>: do not scroll to bottom when tty receives output; option	854	B<False>: do not scroll to bottom when tty receives output; option
941	B<+si>.	855	B<+si>.
942		856
943	=item B<scrollWithBuffer:> I<boolean>	857	=item B<scrollWithBuffer:> I<boolean>
944		858
945	B<True>: scroll with scrollback buffer when tty receives new lines (and	859	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
946	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	860	try to show the same lines) and B<scrollTtyOutput> is False; option
947	with scrollback buffer when tty receives new lines; option B<+sw>.	861	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		862	new lines; option B<+sw>.
948		863
949	=item B<scrollTtyKeypress:> I<boolean>	864	=item B<scrollTtyKeypress:> I<boolean>
950		865
951	B<True>: scroll to bottom when a non-special key is pressed. Special keys	866	B<True>: scroll to bottom when a non-special key is pressed. Special keys
952	are those which are intercepted by rxvt-unicode for special handling and	867	are those which are intercepted by rxvt-unicode for special handling and
…		…
1035	large number (e.g. C<987654321>) to effectively disable the timeout.	950	large number (e.g. C<987654321>) to effectively disable the timeout.
1036		951
1037	=item B<backspacekey:> I<string>	952	=item B<backspacekey:> I<string>
1038		953
1039	The string to send when the backspace key is pressed. If set to B<DEC>	954	The string to send when the backspace key is pressed. If set to B<DEC>
1040	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	955	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1041	(code 8) - which can be reversed with the appropriate DEC private mode	956	(code 8) - which can be reversed with the appropriate DEC private mode
1042	escape sequence.	957	escape sequence.
1043		958
1044	=item B<deletekey:> I<string>	959	=item B<deletekey:> I<string>
1045		960
…		…
1141	Sets the working directory for the shell (or the command specified via	1056	Sets the working directory for the shell (or the command specified via
1142	B<-e>). The I<path> must be an absolute path and it must exist for	1057	B<-e>). The I<path> must be an absolute path and it must exist for
1143	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1058	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1144	directory will be used; option B<-cd>.	1059	directory will be used; option B<-cd>.
1145		1060
1146	=item B<keysym.>I<sym>: I<string>	1061	=item B<keysym.>I<sym>: I<action>
1147		1062
1148	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1063	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1149	intervening resource name B<keysym.> cannot be omitted.	1064	resource name B<keysym.> cannot be omitted.
1150		1065
1151	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1066	Using this resource, you can map key combinations such as
1152	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1067	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1153	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1068	string than would normally result from that combination, making the
1154	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1069	terminal scroll up or down the way you want it, or any other thing an
1155	B<2>, B<3>, B<4>, B<5>.	1070	extension might provide.
		1071
		1072	The key combination that triggers the action, I<sym>, has the following format:
		1073
		1074	(modifiers-)key
		1075
		1076	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1077	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1078	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1079	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1156		1080
1157	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1081	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1158	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1082	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1159	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1083	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1160	current application keymap mode state.	1084	current application keymap mode state.
1161		1085
1162	The spellings of I<key> can be obtained by using B<xev>(1) command or	1086	Due the the large number of modifier combinations, a key mapping will
1163	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1087	match if I<at least> the specified identifiers are being set, and no other
		1088	key mappings with those and more bits are being defined. That means that
		1089	defining a mapping for C<a> will automatically provide definitions for
		1090	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1091	themselves. See the C<builtin:> action, below, for a way to work around
		1092	this when this is a problem.
		1093
		1094	The spelling of I<key> depends on your implementation of X. An easy way to
		1095	find a key name is to use the B<xev>(1) command. You can find a list by
		1096	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1164	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1097	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1165	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1098	value (B<0x0000 - 0xFFFF>).
1166	performed in an exact manner; however, the closest match is assured.
1167		1099
1168	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1100	As with any resource value, the I<action> string may contain backslash
		1101	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1169	number), see RESOURCES in C<man 7 X> for futher details.	1102	number), see RESOURCES in C<man 7 X> for further details.
1170		1103
1171	You can define a range of keysyms in one shot by providing a I<string>	1104	An action starts with an action prefix that selects a certain type
1172	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1105	of action, followed by a colon. An action string without colons is
		1106	interpreted as a literal string to pass to the tty (as if it was
		1107	prefixed with C<string:>).
		1108
		1109	The following action prefixes are known - extensions can provide
		1110	additional prefixes:
		1111
		1112	=over 4
		1113
		1114	=item string:STRING
		1115
		1116	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1117	then the remaining C<STRING> will be passed to the program running in the
		1118	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1119	string C<echo rm -rf /> followed by a newline:
		1120
		1121	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1122
		1123	This could in theory be used to completely redefine your keymap.
		1124
		1125	In addition, for actions of this type, you can define a range of
		1126	keysyms in one shot by loading the C<keysym-list> perl extension and
		1127	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1173	should be a character not used by the strings.	1128	the delimiter `/' should be a character not used by the strings.
1174		1129
1175	Its usage can be demonstrated by an example:	1130	Its usage can be demonstrated by an example:
1176		1131
1177	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1132	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1178		1133
1179	The above line is equivalent to the following three lines:	1134	The above line is equivalent to the following three lines:
1180		1135
1181	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1136	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1182	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1137	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1183	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1138	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1184		1139
		1140	=item command:STRING
		1141
1185	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1142	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1186	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1143	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1144	the opposite of C<string:> - instead of sending it to the program running
		1145	in the terminal, it will be treated as if it were program output). This is
		1146	most useful to feed command sequences into @@RXVT_NAME@@.
		1147
1187	example the following means "change the current locale to C<zh_CN.GBK>	1148	For example the following means "change the current locale to C<zh_CN.GBK>
1188	when Control-Meta-c is being pressed":	1149	when Control-Meta-c is being pressed":
1189		1150
1190	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1151	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1191		1152
1192	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1153	The following example will map Control-Meta-1 and Control-Meta-2 to
1193	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1154	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1194	manpage. For example, the F<selection> extension (activated via	1155	font-switching at runtime:
1195	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1196		1156
1197	URxvt.keysym.M-C-c: perl:selection:rot13	1157	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1158	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1198		1159
1199	Due the the large number of modifier combinations, a defined key mapping	1160	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1200	will match if at I<at least> the specified identifiers are being set, and	1161	info):
1201	no other key mappings with those and more bits are being defined. That
1202	means that defining a key map for C<a> will automatically provide
1203	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1204	mappings themselves.
1205		1162
1206	Unfortunately, this will override built-in key mappings. For example	1163	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1164	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1165
		1166	=item builtin:
		1167
		1168	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1169	key binding existed for the key combination. The obvious use is to undo
		1170	the effect of existing bindings. The not so obvious use is to reinstate
		1171	bindings when another binding overrides too many modifiers.
		1172
1207	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1173	For example if you overwrite the C<Insert> key you will disable
1208	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1174	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1209	user-defined keymap using the C<builtin:> replacement:	1175	"holes" into the user-defined keymap using the C<builtin:> replacement:
1210		1176
1211	URxvt.keysym.Insert: <my insert key sequence>	1177	URxvt.keysym.Insert: <my insert key sequence>
1212	URxvt.keysym.S-Insert: builtin:	1178	URxvt.keysym.S-Insert: builtin:
1213		1179
1214	The first line defines a mapping for C<Insert> and I<any> combination	1180	The first line defines a mapping for C<Insert> and I<any> combination
1215	of modifiers. The second line re-establishes the default mapping for	1181	of modifiers. The second line re-establishes the default mapping for
1216	C<Shift-Insert>.	1182	C<Shift-Insert>.
1217		1183
1218	The following example will map Control-Meta-1 and Control-Meta-2 to	1184	=item builtin-string:
1219	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1220	font-switching at runtime:
1221		1185
1222	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1186	This action is mainly useful to restore string mappings for keys that
1223	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1187	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1188	difficult to explain - basically, this action will send the string to the
		1189	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1190	action for it.
1224		1191
1225	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1192	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1226	info):	1193	selection when you press C<Shift-Insert>. With the following bindings, it
		1194	would instead emit the (undocumented, but what applications running in the
		1195	terminal might expect) sequence C<ESC [ 2 $> instead:
1227		1196
1228	URxvt.keysym.M-C-3: command:\033[8;25;80t	1197	URxvt.keysym.S-Insert: builtin-string:
1229	URxvt.keysym.M-C-4: command:\033[8;48;110t	1198	URxvt.keysym.C-S-Insert: builtin:
		1199
		1200	The first line disables the paste functionality for that key
		1201	combination, and the second reinstates the default behaviour for
		1202	C<Control-Shift-Insert>, which would otherwise be overridden.
		1203
		1204	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1205	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1206	this:
		1207
		1208	URxvt.keysym.C-M-c: builtin-string:
		1209	URxvt.keysym.C-M-v: builtin-string:
		1210
		1211	=item EXTENSION:STRING
		1212
		1213	An action of this form invokes the action B<STRING>, if any, provided
		1214	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1215	be loaded automatically if necessary.
		1216
		1217	Not all extensions define actions, but popular extensions that do
		1218	include the I<selection> and I<matcher> extensions (documented in their
		1219	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1220	respectively).
		1221
		1222	From the silly examples department, this will rot13-"encrypt"
		1223	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1224	keyboards:
		1225
		1226	URxvt.keysym.M-C-c: selection:rot13
		1227
		1228	=item perl:STRING DEPRECATED
		1229
		1230	This is a deprecated way of invoking commands provided by perl
		1231	extensions. It is still supported, but should not be used anymore.
		1232
		1233	=back
1230		1234
1231	=item B<perl-ext-common>: I<string>	1235	=item B<perl-ext-common>: I<string>
1232		1236
1233	=item B<perl-ext>: I<string>	1237	=item B<perl-ext>: I<string>
1234		1238
…		…
1236	use in this terminal instance; option B<-pe>.	1240	use in this terminal instance; option B<-pe>.
1237		1241
1238	Extension names can be prefixed with a C<-> sign to prohibit using	1242	Extension names can be prefixed with a C<-> sign to prohibit using
1239	them. This can be useful to selectively disable some extensions loaded	1243	them. This can be useful to selectively disable some extensions loaded
1240	by default, or specified via the C<perl-ext-common> resource. For	1244	by default, or specified via the C<perl-ext-common> resource. For
1241	example, C<default,-selection> will use all the default extension except	1245	example, C<default,-selection> will use all the default extensions except
1242	C<selection>.	1246	C<selection>.
1243		1247
1244	Extension names can also be followed by an argument in angle brackets	1248	The default set includes the C<selection>, C<option-popup>,
1245	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1249	C<selection-popup>, C<readline> and C<searchable-scrollback>
1246	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1250	extensions, and extensions which are mentioned in B<keysym> resources.
1247	multiple times with different arguments will pass multiple arguments to	1251
1248	the extension.	1252	Any extension such that a corresponding resource is given on the
		1253	command line is automatically appended to B<perl-ext>.
1249		1254
1250	Each extension is looked up in the library directories, loaded if	1255	Each extension is looked up in the library directories, loaded if
1251	necessary, and bound to the current terminal instance.	1256	necessary, and bound to the current terminal instance. When the library
		1257	search path contains multiple extension files of the same name, then the
		1258	first one found will be used.
1252		1259
1253	If both of these resources are the empty string, then the perl	1260	If both of these resources are the empty string, then the perl interpreter
1254	interpreter will not be initialized. The idea behind two options is that	1261	will not be initialized. The rationale for having two options is that
1255	B<perl-ext-common> will be used for extensions that should be available to	1262	B<perl-ext-common> will be used for extensions that should be available to
1256	all instances, while B<perl-ext> is used for specific instances.	1263	all instances, while B<perl-ext> is used for specific instances.
1257		1264
1258	=item B<perl-eval>: I<string>	1265	=item B<perl-eval>: I<string>
1259		1266
…		…
1261	the @@RXVT_NAME@@perl(3) manpage.	1268	the @@RXVT_NAME@@perl(3) manpage.
1262		1269
1263	=item B<perl-lib>: I<path>	1270	=item B<perl-lib>: I<path>
1264		1271
1265	Colon-separated list of additional directories that hold extension	1272	Colon-separated list of additional directories that hold extension
1266	scripts. When looking for extensions specified by the C<perl> resource,	1273	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1267	@@RXVT_NAME@@ will first look in these directories and then in	1274	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1268	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1275	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1269		1276
1270	See the @@RXVT_NAME@@perl(3) manpage.	1277	See the @@RXVT_NAME@@perl(3) manpage.
1271		1278
1272	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1279	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1273		1280
…		…
1277	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1284	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1278		1285
1279	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1286	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1280	for details.	1287	for details.
1281		1288
1282	=item B<searchable-scrollback:> I<keysym>	1289	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1283		1290
1284	Sets the hotkey that starts the incremental scrollback buffer search	1291	This resource is deprecated and will be removed. Use a B<keysym> resource
1285	(default: C<M-s>).	1292	instead, e.g.:
1286		1293
		1294	URxvt.keysym.M-s: searchable-scrollback:start
		1295
1287	=item B<urlLauncher>: I<string>	1296	=item B<url-launcher>: I<string>
1288		1297
1289	Specifies the program to be started with a URL argument. Used by the	1298	Specifies the program to be started with a URL argument. Used by the
1290	C<selection-popup> and C<matcher> perl extensions.	1299	C<selection-popup> and C<matcher> perl extensions.
1291		1300
1292	=item B<transient-for>: I<windowid>	1301	=item B<transient-for>: I<windowid>
…		…
1296	=item B<override-redirect>: I<boolean>	1305	=item B<override-redirect>: I<boolean>
1297		1306
1298	Compile I<frills>: Sets override-redirect for the terminal window, making	1307	Compile I<frills>: Sets override-redirect for the terminal window, making
1299	it almost invisible to window managers; option B<-override-redirect>.	1308	it almost invisible to window managers; option B<-override-redirect>.
1300		1309
		1310	=item B<iso14755:> I<boolean>
		1311
		1312	Turn on/off ISO 14755 (default enabled).
		1313
1301	=item B<iso14755_52:> I<boolean>	1314	=item B<iso14755_52:> I<boolean>
1302		1315
1303	Turn on/off ISO 14755 5.2 mode (default enabled).	1316	Turn on/off ISO 14755 5.2 mode (default enabled).
		1317
		1318	=back
		1319
		1320	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1321
		1322	=over 4
		1323
		1324	=item B<-pixmap> I<file[;oplist]>
		1325
		1326	=item B<backgroundPixmap:> I<file[;oplist]>
		1327
		1328	Compile I<pixbuf>: Use the specified image file as the window's
		1329	background and also optionally specify a colon separated list of
		1330	operations to modify it. Note that you may need to quote the C<;>
		1331	character when using the command line option, as C<;> is usually a
		1332	metacharacter in shells. Supported operations are:
		1333
		1334	=over 4
		1335
		1336	=item B<WxH+X+Y>
		1337
		1338	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1339	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1340	scale of 0 disables scaling.
		1341
		1342	=item B<op=tile>
		1343
		1344	enables tiling
		1345
		1346	=item B<op=keep-aspect>
		1347
		1348	maintain the image aspect ratio when scaling
		1349
		1350	=item B<op=root-align>
		1351
		1352	use the position of the terminal window relative to the root window as
		1353	the image offset, simulating a root window background
		1354
		1355	=back
		1356
		1357	The default scale and position setting is C<100x100+50+50>.
		1358	Alternatively, a predefined set of templates can be used to achieve
		1359	the most common setups:
		1360
		1361	=over 4
		1362
		1363	=item B<style=tiled>
		1364
		1365	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1366
		1367	=item B<style=aspect-stretched>
		1368
		1369	the image is scaled to fill the whole window maintaining the aspect
		1370	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1371
		1372	=item B<style=stretched>
		1373
		1374	the image is scaled to fill the whole window. Equivalent to 100x100
		1375
		1376	=item B<style=centered>
		1377
		1378	the image is centered with no scaling. Equivalent to 0x0+50+50
		1379
		1380	=item B<style=root-tiled>
		1381
		1382	the image is tiled with no scaling and using 'root' positioning.
		1383	Equivalent to 0x0:op=tile:op=root-align
		1384
		1385	=back
		1386
		1387	If multiple templates are specified the last one wins. Note that a
		1388	template overrides all the scale, position and operations settings.
		1389
		1390	If used in conjunction with pseudo-transparency, the specified pixmap
		1391	will be blended over the transparent background using alpha-blending.
		1392
		1393	=item B<-tr>\|B<+tr>
		1394
		1395	=item B<transparent:> I<boolean>
		1396
		1397	Turn on/off pseudo-transparency by using the root pixmap as background.
		1398
		1399	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1400	will be removed in future versions.
		1401
		1402	=item B<-tint> I<colour>
		1403
		1404	=item B<tintColor:> I<colour>
		1405
		1406	Tint the transparent background with the given colour. Note that a
		1407	black tint yields a completely black image while a white tint yields
		1408	the image unchanged.
		1409
		1410	=item B<-sh> I<number>
		1411
		1412	=item B<shading:> I<number>
		1413
		1414	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1415	A value of 100 means no shading.
		1416
		1417	=item B<-blr> I<HxV>
		1418
		1419	=item B<blurRadius:> I<HxV>
		1420
		1421	Apply gaussian blur with the specified radius to the transparent
		1422	background. If a single number is specified, the vertical and
		1423	horizontal radii are considered to be the same. Setting one of the
		1424	radii to 1 and the other to a large number creates interesting effects
		1425	on some backgrounds. The maximum radius value is 128. An horizontal or
		1426	vertical radius of 0 disables blurring.
		1427
		1428	=item B<path:> I<path>
		1429
		1430	Specify the colon-delimited search path for finding background image files.
1304		1431
1305	=back	1432	=back
1306		1433
1307	=head1 THE SCROLLBAR	1434	=head1 THE SCROLLBAR
1308		1435
…		…
1356	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1483	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1357	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1484	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1358		1485
1359	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1486	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1360	inserted too.	1487	inserted too.
		1488
		1489	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1490	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1491	binding causes the value of the internal selection to be copied to the
		1492	CLIPBOARD selection, while the second binding causes the value of the
		1493	CLIPBOARD selection to be inserted.
1361		1494
1362	=back	1495	=back
1363		1496
1364	=head1 CHANGING FONTS	1497	=head1 CHANGING FONTS
1365		1498
…		…
1447	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1580	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1448	it can be seen via the I<who(1)> command, and can accept messages. To	1581	it can be seen via the I<who(1)> command, and can accept messages. To
1449	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1582	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1450	on some systems or setgid to root or to some other group on others.	1583	on some systems or setgid to root or to some other group on others.
1451		1584
1452	=head1 COLORS AND GRAPHICS	1585	=head1 COLOURS AND GRAPHICS
1453		1586
1454	In addition to the default foreground and background colours,	1587	In addition to the default foreground and background colours,
1455	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1588	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1456	high-intensity bold/blink versions of the same). Here is a list of the	1589	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1457	colours with their names.	1590	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1591	cube plus a 8 (24) colour greyscale ramp.
		1592
		1593	Here is a list of the ANSI colours with their names.
1458		1594
1459	=begin table	1595	=begin table
1460		1596
1461	B<color0> (black) = Black	1597	B<color0> (black) = Black
1462	B<color1> (red) = Red3	1598	B<color1> (red) = Red3
…		…
1482	It is also possible to specify the colour values of B<foreground>,	1618	It is also possible to specify the colour values of B<foreground>,
1483	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1619	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1484	a number 0-15, as a convenient shorthand to reference the colour name of	1620	a number 0-15, as a convenient shorthand to reference the colour name of
1485	color0-color15.	1621	color0-color15.
1486		1622
1487	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1623	The following text gives values for the standard 88 colour mode (and
1488	additional 72 colours. The first 64 of those (with indices 16 to 79)	1624	values for the 256 colour mode in parentheses).
1489	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1490	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1491		1625
		1626	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1627
		1628	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1629	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1630
		1631	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1632	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1633	the RGB cube.
		1634
1492	Together, all those colours implement the 88 colour xterm colours. Only	1635	Together, all those colours implement the 88 (256) colour xterm
1493	the first 16 can be changed using resources currently, the rest can only	1636	colours. Only the first 16 can be changed using resources currently, the
1494	be changed via command sequences ("escape codes").	1637	rest can only be changed via command sequences ("escape codes").
		1638
		1639	Applications are advised to use terminfo or command sequences to discover
		1640	number and RGB values of all colours (yes, you can query this...).
1495		1641
1496	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1642	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1497	always swapping the foreground/background colours. This is in contrast to	1643	always swapping the foreground/background colours. This is in contrast to
1498	I<xterm>(1) where the colours are only swapped if they have not otherwise	1644	I<xterm>(1) where the colours are only swapped if they have not otherwise
1499	been specified. For example,	1645	been specified. For example,
1500		1646
1501	=over 4
1502
1503	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1647	@@RXVT_NAME@@ -fg Black -bg White -rv
1504		1648
1505	would yield White on Black, while on I<xterm>(1) it would yield Black	1649	would yield White on Black, while on I<xterm>(1) it would yield Black on
1506	on White.	1650	White.
1507
1508	=back
1509		1651
1510	=head2 ALPHA CHANNEL SUPPORT	1652	=head2 ALPHA CHANNEL SUPPORT
1511		1653
1512	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1654	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1513	their act together, rxvt-unicode will do it's own alpha channel management:	1655	their act together, rxvt-unicode will do its own alpha channel management:
1514		1656
1515	You can prefix any color with an opaquenes percentage enclosed in	1657	You can prefix any colour with an opaqueness percentage enclosed in
1516	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1658	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1517	(0-100) that specifies the opacity of the color, where C<0> is completely	1659	(0-100) that specifies the opacity of the colour, where C<0> is completely
1518	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1660	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1519	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1661	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1520	is the recommended format to specify transparency values, and works with	1662	is the recommended format to specify transparency values, and works with
1521	all ways to specify a colour.	1663	all ways to specify a colour.
1522		1664
…		…
1600		1742
1601	=item B<SHELL>	1743	=item B<SHELL>
1602		1744
1603	The shell to be used for command execution, defaults to C</bin/sh>.	1745	The shell to be used for command execution, defaults to C</bin/sh>.
1604		1746
1605	=item B<RXVT_SOCKET>	1747	=item B<RXVT_SOCKET> [I<sic>]
1606		1748
1607	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1749	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1608	@@RXVT_NAME@@d(1).	1750	@@RXVT_NAME@@d(1).
1609		1751
1610	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1752	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1753
		1754	=item B<URXVT_PERL_LIB>
		1755
		1756	Additional F<:>-separated library search path for perl extensions. Will be
		1757	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1758	directory.
		1759
		1760	=item B<URXVT_PERL_VERBOSITY>
		1761
		1762	See L<@@RXVT_NAME@@perl>(3).
1611		1763
1612	=item B<HOME>	1764	=item B<HOME>
1613		1765
1614	Used to locate the default directory for the unix domain socket for	1766	Used to locate the default directory for the unix domain socket for
1615	daemon communications and to locate various resource files (such as	1767	daemon communications and to locate various resource files (such as
1616	C<.Xdefaults>)	1768	C<.Xdefaults>)
1617		1769
1618	=item B<XAPPLRESDIR>	1770	=item B<XAPPLRESDIR>
1619		1771
1620	Directory where various X resource files are being located.	1772	Directory where application-specific X resource files are located.
1621		1773
1622	=item B<XENVIRONMENT>	1774	=item B<XENVIRONMENT>
1623		1775
1624	If set and accessible, gives the name of a X resource file to be loaded by	1776	If set and accessible, gives the name of a X resource file to be loaded by
1625	@@RXVT_NAME@@.	1777	@@RXVT_NAME@@.
…		…
1630		1782
1631	=over 4	1783	=over 4
1632		1784
1633	=item B</usr/lib/X11/rgb.txt>	1785	=item B</usr/lib/X11/rgb.txt>
1634		1786
1635	Color names.	1787	Colour names.
1636		1788
1637	=back	1789	=back
1638		1790
1639	=head1 SEE ALSO	1791	=head1 SEE ALSO
1640		1792
		1793	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1641	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1794	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1642		1795
1643	=head1 CURRENT PROJECT COORDINATOR	1796	=head1 CURRENT PROJECT COORDINATOR
1644		1797
1645	=over 4	1798	=over 4
1646		1799
1647	=item Project Coordinator	1800	=item Project Coordinator
1648		1801
1649	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1802	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1650		1803
1651	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1804	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1652		1805
1653	=back	1806	=back
1654		1807
…		…
1658		1811
1659	=item John Bovey	1812	=item John Bovey
1660		1813
1661	University of Kent, 1992, wrote the original Xvt.	1814	University of Kent, 1992, wrote the original Xvt.
1662		1815
1663	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1816	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1664		1817
1665	very heavily modified Xvt and came up with Rxvt	1818	very heavily modified Xvt and came up with Rxvt
1666		1819
1667	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1820	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1668		1821
1669	wrote the Greek Keyboard Input (no longer in code)	1822	wrote the Greek Keyboard Input (no longer in code)
1670		1823
1671	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1824	=item mj olesen <olesen@me.QueensU.CA>
1672		1825
1673	Wrote the menu system.	1826	Wrote the menu system.
1674		1827
1675	Project Coordinator (changes.txt 2.11 to 2.21)	1828	Project Coordinator (changes.txt 2.11 to 2.21)
1676		1829
1677	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1830	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1678		1831
1679	Project Coordinator (changes.txt 2.21a to 2.4.5)	1832	Project Coordinator (changes.txt 2.21a to 2.4.5)
1680		1833
1681	=item Geoff Wing L<< <gcw@pobox.com> >>	1834	=item Geoff Wing <gcw@pobox.com>
1682		1835
1683	Rewrote screen display and text selection routines.	1836	Rewrote screen display and text selection routines.
1684		1837
1685	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1838	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1686		1839
1687	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1840	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1688		1841
1689	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1842	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1690	extension, random hacks, numerous bugfixes and extensions.	1843	extension, random hacks, numerous bugfixes and extensions.
1691		1844
1692	Project Coordinator (Changes 1.0 -)	1845	Project Coordinator (Changes 1.0 -)
1693		1846
1694	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1847	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1695		1848
1696	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1849	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1697		1850
1698	=back	1851	=back
1699		1852

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.171 by root, Sat May 30 08:53:48 2009 UTC vs. Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.171 by root, Sat May 30 08:53:48 2009 UTC vs.
Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC