ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.194 by sf-exg, Wed Mar 9 13:24:30 2011 UTC vs.
Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC

… …
84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1 84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85Orange'. 85Orange'.
86 86
87The following options are available: 87The following options are available:
88 88
89=over 4 89=over
90 90
91=item B<-help>, B<--help> 91=item B<-help>, B<--help>
92 92
93Print out a message describing available options. 93Print out a message describing available options.
94 94
… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
114possible visual ids) instead of the default, and also allocate a private
115colormap. All visual types except for DirectColor are supported.
116
111=item B<-geometry> I<geom> 117=item B<-geometry> I<geom>
112 118
113Window geometry (B<-g> still respected); resource B<geometry>. 119Window geometry (B<-g> still respected); resource B<geometry>.
114 120
115=item B<-rv>|B<+rv> 121=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 127Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 128
123=item B<-ss>|B<+ss> 129=item B<-ss>|B<+ss>
124 130
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 131Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133 132
134=item B<-fade> I<number> 133=item B<-fade> I<number>
135 134
136Fade the text by the given percentage when focus is lost. Small values 135Fade the text by the given percentage when focus is lost. Small values
137fade a little only, 100 completely replaces all colours by the fade 136fade a little only, 100 completely replaces all colours by the fade
… …
140=item B<-fadecolor> I<colour> 139=item B<-fadecolor> I<colour>
141 140
142Fade to this colour when fading is used (see B<-fade>). The default colour 141Fade to this colour when fading is used (see B<-fade>). The default colour
143is opaque black. resource B<fadeColor>. 142is opaque black. resource B<fadeColor>.
144 143
145=item B<-tint> I<colour>
146
147Tint the transparent background with the given colour;
148resource I<tintColor>.
149
150=item B<-sh> I<number>
151
152Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153A value of 100 means no shading; resource I<shading>.
154
155=item B<-blt> I<string>
156
157Specify background blending type. If background pixmap is specified
158at the same time as transparency - such pixmap will be blended over
159the transparent background, using the method specified. Supported values are:
160B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165=item B<-blr> I<HxV>
166
167Apply Gaussian Blur with the specified radii to the transparent
168background. If a single number is specified - both vertical and
169horizontal radii are considered to be the same. Setting one of the
170radii to 1 and another to a large number creates interesting effects
171on some backgrounds. Maximum radius value is 128;
172resource I<blurRadius>.
173
174=item B<-icon> I<file> 144=item B<-icon> I<file>
175 145
176Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This 146Compile I<pixbuf>: Use the specified image as application icon. This
177is used by many window managers, taskbars and pagers to represent the 147is used by many window managers, taskbars and pagers to represent the
178application window; resource I<iconFile>. 148application window; resource I<iconFile>.
179 149
180=item B<-bg> I<colour> 150=item B<-bg> I<colour>
181 151
182Window background colour; resource B<background>. 152Window background colour; resource B<background>.
183 153
184=item B<-fg> I<colour> 154=item B<-fg> I<colour>
185 155
186Window foreground colour; resource B<foreground>. 156Window foreground colour; resource B<foreground>.
187
188=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
189
190Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
191optionally specify its scaling with a geometry string. Note you may need to
192add quotes to avoid special shell interpretation of the C<;> in the
193command-line; for more details see resource B<backgroundPixmap>.
194 157
195=item B<-cr> I<colour> 158=item B<-cr> I<colour>
196 159
197The cursor colour; resource B<cursorColor>. 160The cursor colour; resource B<cursorColor>.
198 161
… …
257 220
258=item B<-ls>|B<+ls> 221=item B<-ls>|B<+ls>
259 222
260Start as a login-shell/sub-shell; resource B<loginShell>. 223Start as a login-shell/sub-shell; resource B<loginShell>.
261 224
225=item B<-mc> I<milliseconds>
226
227Specify the maximum time between multi-click selections.
228
262=item B<-ut>|B<+ut> 229=item B<-ut>|B<+ut>
263 230
264Compile I<utmp>: Inhibit/enable writing a utmp entry; resource 231Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265B<utmpInhibit>. 232B<utmpInhibit>.
266 233
… …
344 311
345=item B<-override-redirect> 312=item B<-override-redirect>
346 313
347Compile I<frills>: Sets override-redirect on the window; resource 314Compile I<frills>: Sets override-redirect on the window; resource
348B<override-redirect>. 315B<override-redirect>.
316
317=item B<-dockapp>
318
319Sets the initial state of the window to WithdrawnState, which makes
320window managers that support this extension treat it as a dockapp.
349 321
350=item B<-sbg> 322=item B<-sbg>
351 323
352Compile I<frills>: Disable the usage of the built-in block graphics/line 324Compile I<frills>: Disable the usage of the built-in block graphics/line
353drawing characters and just rely on what the specified fonts provide. Use 325drawing characters and just rely on what the specified fonts provide. Use
… …
408=item B<-pt> I<style> 380=item B<-pt> I<style>
409 381
410Compile I<XIM>: input style for input method; B<OverTheSpot>, 382Compile I<XIM>: input style for input method; B<OverTheSpot>,
411B<OffTheSpot>, B<Root>; resource B<preeditType>. 383B<OffTheSpot>, B<Root>; resource B<preeditType>.
412 384
385If the perl extension C<xim-onthespot> is used (which is the default),
386then additionally the C<OnTheSpot> preedit type is available.
387
413=item B<-im> I<text> 388=item B<-im> I<text>
414 389
415Compile I<XIM>: input method name. resource B<inputMethod>. 390Compile I<XIM>: input method name. resource B<inputMethod>.
416 391
417=item B<-imlocale> I<string> 392=item B<-imlocale> I<string>
… …
431Change the meaning of triple-click selection with the left mouse 406Change the meaning of triple-click selection with the left mouse
432button. Only effective when the original (non-perl) selection code is 407button. Only effective when the original (non-perl) selection code is
433in-use. Instead of selecting a full line it will extend the selection to 408in-use. Instead of selecting a full line it will extend the selection to
434the end of the logical line only. resource B<tripleclickwords>. 409the end of the logical line only. resource B<tripleclickwords>.
435 410
411=item B<-dpb>|B<+dpb>
412
413Compile frills: Disable (or enable) emitting bracketed paste mode
414sequences (default enabled). Bracketed paste mode allows programs
415to detect when something is pasted. Since more and more programs
416abuse this, these sequences can be disabled. The command sequences to
417enable and query paste mode will still work, but the actual bracket
418sequences will no longer be emitted. You can also toggle this from the
419ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
420
436=item B<-insecure> 421=item B<-insecure>
437 422
438Enable "insecure" mode, which currently enables most of the escape 423Enable "insecure" mode, which currently enables most of the escape
439sequences that echo strings. See the resource B<insecure> for more 424sequences that echo strings. See the resource B<insecure> for more
440info. 425info.
… …
452 437
453=item B<-ssr>|B<+ssr> 438=item B<-ssr>|B<+ssr>
454 439
455Turn on/off secondary screen scroll (default enabled); resource 440Turn on/off secondary screen scroll (default enabled); resource
456B<secondaryScroll>. 441B<secondaryScroll>.
442
443=item B<-rm> I<mode>
444
445Compile I<frills>: Sets long line rewrapping behaviour on window resizes
446to one of B<auto> (the default), B<always> or B<never>. The latter two
447modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
448is non-empty, and wings lines (acts like B<never>) otherwise; resource
449B<rewrapMode>.
457 450
458=item B<-hold>|B<+hold> 451=item B<-hold>|B<+hold>
459 452
460Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ 453Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
461will not immediately destroy its window when the program executed within 454will not immediately destroy its window when the program executed within
… …
539 close $pty; 532 close $pty;
540 533
541 # now communicate with rxvt 534 # now communicate with rxvt
542 my $slave = $pty->slave; 535 my $slave = $pty->slave;
543 while (<$slave>) { print $slave "got <$_>\n" } 536 while (<$slave>) { print $slave "got <$_>\n" }
537
538Note that, despite what the name might imply, the file descriptor does not
539need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
540domain or tcp socket). While tty operations cannot be done in this case,
541B<@@RXVT_NAME@@> can still be remote controlled with it:
542
543 use Socket;
544 use Fcntl;
545
546 socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
547 fcntl $slave, Fcntl::F_SETFD, 0;
548 system "exec @@RXVT_NAME|| -pty-fd " . (fileno $slave) . " &";
549 close $slave;
550
551 syswrite $URXVT, "Type a secret password: ";
552 my $secret = do { local $/ = "\r"; <$URXVT> };
553 print "Not so secret anymore: $secret\n";
544 554
545=item B<-pe> I<string> 555=item B<-pe> I<string>
546 556
547Comma-separated list of perl extension scripts to use (or not to use) in 557Comma-separated list of perl extension scripts to use (or not to use) in
548this terminal instance. See resource B<perl-ext> for details. 558this terminal instance. See resource B<perl-ext> for details.
… …
576be used. Command-line arguments can be used to override resource 586be used. Command-line arguments can be used to override resource
577settings. The following resources are supported (you might want to 587settings. The following resources are supported (you might want to
578check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl 588check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
579extensions not documented here): 589extensions not documented here):
580 590
581=over 4 591=over
582 592
583=item B<depth:> I<bitdepth> 593=item B<depth:> I<bitdepth>
584 594
585Compile I<xft>: Attempt to find a visual with the given bit depth; 595Compile I<xft>: Attempt to find a visual with the given bit depth;
586option B<-depth>. 596option B<-depth>.
… …
687 697
688B<False>: specify that everything is to be displayed, even 698B<False>: specify that everything is to be displayed, even
689if the refresh is too fast for the human eye to read anything (or the 699if the refresh is too fast for the human eye to read anything (or the
690monitor to display anything); option B<+ss>. 700monitor to display anything); option B<+ss>.
691 701
692=item B<transparent:> I<boolean>
693
694Turn on/off pseudo-transparency by using the root pixmap as background.
695
696B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
697future versions.
698
699=item B<fading:> I<number> 702=item B<fading:> I<number>
700 703
701Fade the text by the given percentage when focus is lost; option B<-fade>. 704Fade the text by the given percentage when focus is lost; option B<-fade>.
702 705
703=item B<fadeColor:> I<colour> 706=item B<fadeColor:> I<colour>
704 707
705Fade to this colour, when fading is used (see B<fading:>). The default 708Fade to this colour, when fading is used (see B<fading:>). The default
706colour is black; option B<-fadecolor>. 709colour is black; option B<-fadecolor>.
707 710
708=item B<tintColor:> I<colour>
709
710Tint the transparent background with the given colour. If the RENDER
711extension is not available only black, red, green, yellow, blue,
712magenta, cyan and white tints can be performed server-side. Note that
713a black tint yields a completely black image while a white tint yields
714the image unchanged; option B<-tint>.
715
716=item B<shading:> I<number>
717
718Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
719A value of 100 means no shading; option B<-sh>.
720
721=item B<blendType:> I<string>
722
723Specify background blending type; option B<-blt>.
724
725=item B<blurRadius:> I<number>
726
727Apply gaussian blur with the specified radius to the transparent
728background; option B<-blr>.
729
730=item B<iconFile:> I<file> 711=item B<iconFile:> I<file>
731 712
732Set the application icon pixmap; option B<-icon>. 713Set the application icon pixmap; option B<-icon>.
733 714
734=item B<scrollColor:> I<colour> 715=item B<scrollColor:> I<colour>
… …
742 723
743=item B<borderColor:> I<colour> 724=item B<borderColor:> I<colour>
744 725
745The colour of the border around the text area and between the scrollbar 726The colour of the border around the text area and between the scrollbar
746and the text. 727and the text.
747
748=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
749
750Use the specified image file for the background and also
751optionally specify its scaling with a geometry string B<WxH+X+Y>,
752(default C<100x100+50+50>) in which B<"W" / "H"> specify the
753horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
754centre (percent). A scale of 0 displays the image with tiling.
755The maximum permitted scale is 1000.
756Additional operations can be specified after colon B<:op1:op2...>.
757Supported operations are:
758
759 tile force background image to be tiled and not scaled. Equivalent to 0x0
760 propscale will scale image keeping proportions
761 auto will scale image to match window size. Equivalent to 100x100
762 hscale will scale image horizontally to the window size
763 vscale will scale image vertically to the window size
764 scale will scale image to match window size
765 root will tile image as if it was a root window background, auto-adjusting
766 whenever terminal window moves
767
768If used in conjunction with B<-tr> option, the specified pixmap will be
769blended over the transparent background using alpha-blending. If I<afterimage>
770support has been compiled in it is possible to choose other blending
771types with B<-blt "type"> option.
772
773=item B<path:> I<path>
774
775Specify the colon-delimited search path for finding background image files.
776 728
777=item B<font:> I<fontlist> 729=item B<font:> I<fontlist>
778 730
779Select the fonts to be used. This is a comma separated list of font names 731Select the fonts to be used. This is a comma separated list of font names
780that are checked in order when trying to find glyphs for characters. The 732that are checked in order when trying to find glyphs for characters. The
… …
877 829
878B<True>: start as a login shell by prepending a `-' to B<argv[0]> of 830B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
879the shell; option B<-ls>. B<False>: start as a normal sub-shell 831the shell; option B<-ls>. B<False>: start as a normal sub-shell
880[default]; option B<+ls>. 832[default]; option B<+ls>.
881 833
834=item B<multiClickTime:> I<number>
835
836Specify the maximum time in milliseconds between multi-click select
837events. The default is 500 milliseconds; option B<-mc>.
838
882=item B<utmpInhibit:> I<boolean> 839=item B<utmpInhibit:> I<boolean>
883 840
884B<True>: inhibit writing record into the system log file B<utmp>; 841B<True>: inhibit writing record into the system log file B<utmp>;
885option B<-ut>. B<False>: write record into the system log file B<utmp> 842option B<-ut>. B<False>: write record into the system log file B<utmp>
886[default]; option B<+ut>. 843[default]; option B<+ut>.
… …
935B<False>: do not scroll to bottom when tty receives output; option 892B<False>: do not scroll to bottom when tty receives output; option
936B<+si>. 893B<+si>.
937 894
938=item B<scrollWithBuffer:> I<boolean> 895=item B<scrollWithBuffer:> I<boolean>
939 896
940B<True>: scroll with scrollback buffer when tty receives new lines (and 897B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
941B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll 898try to show the same lines) and B<scrollTtyOutput> is False; option
942with scrollback buffer when tty receives new lines; option B<+sw>. 899B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
900new lines; option B<+sw>.
943 901
944=item B<scrollTtyKeypress:> I<boolean> 902=item B<scrollTtyKeypress:> I<boolean>
945 903
946B<True>: scroll to bottom when a non-special key is pressed. Special keys 904B<True>: scroll to bottom when a non-special key is pressed. Special keys
947are those which are intercepted by rxvt-unicode for special handling and 905are those which are intercepted by rxvt-unicode for special handling and
948are not passed onto the shell; option B<-sk>. B<False>: do not scroll to 906are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
949bottom when a non-special key is pressed; option B<+sk>. 907bottom when a non-special key is pressed; option B<+sk>.
950 908
951=item B<saveLines:> I<number> 909=item B<saveLines:> I<number>
952 910
953Save I<number> lines in the scrollback buffer [default 64]. This 911Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
954resource is limited on most machines to 65535; option B<-sl>.
955 912
956=item B<internalBorder:> I<number> 913=item B<internalBorder:> I<number>
957 914
958Internal border of I<number> pixels. This resource is limited to 100; 915Internal border of I<number> pixels. This resource is limited to 100;
959option B<-b>. 916option B<-b>.
… …
1022 979
1023=item B<pointerColor2:> I<colour> 980=item B<pointerColor2:> I<colour>
1024 981
1025Mouse pointer background colour. 982Mouse pointer background colour.
1026 983
984=item B<pointerShape:> I<string>
985
986Compile I<frills>: Specifies the name of the mouse pointer shape
987[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
988file for possible values (omit the C<XC_> prefix).
989
1027=item B<pointerBlankDelay:> I<number> 990=item B<pointerBlankDelay:> I<number>
1028 991
1029Specifies number of seconds before blanking the pointer [default 2]. Use a 992Specifies number of seconds before blanking the pointer [default 2]. Use a
1030large number (e.g. C<987654321>) to effectively disable the timeout. 993large number (e.g. C<987654321>) to effectively disable the timeout.
1031 994
… …
1057 1020
1058B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> 1021B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
1059 1022
1060=item B<preeditType:> I<style> 1023=item B<preeditType:> I<style>
1061 1024
1062B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. 1025B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1063 1026
1064=item B<inputMethod:> I<name> 1027=item B<inputMethod:> I<name>
1065 1028
1066I<name> of inputMethod to use; option B<-im>. 1029I<name> of inputMethod to use; option B<-im>.
1067 1030
… …
1085 1048
1086Change the meaning of triple-click selection with the left mouse 1049Change the meaning of triple-click selection with the left mouse
1087button. Instead of selecting a full line it will extend the selection to 1050button. Instead of selecting a full line it will extend the selection to
1088the end of the logical line only; option B<-tcw>. 1051the end of the logical line only; option B<-tcw>.
1089 1052
1053=item B<disablePasteBrackets:> I<boolean>
1054
1055Prevent emission of paste bracket sequences; option B<-dpb>.
1056
1090=item B<insecure:> I<boolean> 1057=item B<insecure:> I<boolean>
1091 1058
1092Enables "insecure" mode. Rxvt-unicode offers some escape sequences that 1059Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1093echo arbitrary strings like the icon name or the locale. This could be 1060echo arbitrary strings like the icon name or the locale. This could be
1094abused if somebody gets 8-bit-clean access to your display, whether 1061abused if somebody gets 8-bit-clean access to your display, whether
1095through a mail client displaying mail bodies unfiltered or through 1062through a mail client displaying mail bodies unfiltered or through
1096write(1) or any other means. Therefore, these sequences are disabled by 1063write(1) or any other means. Therefore, these sequences are disabled by
1097default. (Note that many other terminals, including xterm, have these 1064default. (Note that many other terminals, including xterm, have these
… …
1115 1082
1116=item B<secondaryScreen:> I<boolean> 1083=item B<secondaryScreen:> I<boolean>
1117 1084
1118Turn on/off secondary screen (default enabled). 1085Turn on/off secondary screen (default enabled).
1119 1086
1087=item B<rewrapMode:> I<mode>
1088
1089Sets long line rewrap behaviour on window resize to one of B<auto>
1090(default), B<always> or B<never>.
1091
1120=item B<secondaryScroll:> I<boolean> 1092=item B<secondaryScroll:> I<boolean>
1121 1093
1122Turn on/off secondary screen scroll (default enabled). If this 1094Turn on/off secondary screen scroll (default enabled). If this
1123option is enabled, scrolls on the secondary screen will change the 1095option is enabled, scrolls on the secondary screen will change the
1124scrollback buffer and, when secondaryScreen is off, switching 1096scrollback buffer and, when secondaryScreen is off, switching
… …
1136Sets the working directory for the shell (or the command specified via 1108Sets the working directory for the shell (or the command specified via
1137B<-e>). The I<path> must be an absolute path and it must exist for 1109B<-e>). The I<path> must be an absolute path and it must exist for
1138@@RXVT_NAME@@ to start. If it isn't specified then the current working 1110@@RXVT_NAME@@ to start. If it isn't specified then the current working
1139directory will be used; option B<-cd>. 1111directory will be used; option B<-cd>.
1140 1112
1141=item B<keysym.>I<sym>: I<string> 1113=item B<keysym.>I<sym>: I<action>
1142 1114
1143Compile I<frills>: Associate I<string> with keysym I<sym>. The 1115Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1144intervening resource name B<keysym.> cannot be omitted. 1116resource name B<keysym.> cannot be omitted.
1145 1117
1146The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1118Using this resource, you can map key combinations such as
1147any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1119C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1148B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1120string than would normally result from that combination, making the
1149and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1121terminal scroll up or down the way you want it, or any other thing an
1150B<2>, B<3>, B<4>, B<5>. 1122extension might provide.
1123
1124The key combination that triggers the action, I<sym>, has the following format:
1125
1126 (modifiers-)key
1127
1128Where I<modifiers> can be any combination of the following full or
1129abbreviated modifier names:
1130
1131=begin table
1132
1133 B<ISOLevel3> B<I>
1134 B<AppKeypad> B<K>
1135 B<Control> B<C>
1136 B<NumLock> B<N>
1137 B<Shift> B<S>
1138 B<Meta> B<M> I<or> B<A>
1139 B<Lock> B<L>
1140 B<Mod1> B<1>
1141 B<Mod2> B<2>
1142 B<Mod3> B<3>
1143 B<Mod4> B<4>
1144 B<Mod5> B<5>
1145
1146=end table
1151 1147
1152The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1148The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1153whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1149whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1154keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1150keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1155current application keymap mode state. 1151current application keymap mode state.
1156 1152
1157The spellings of I<key> can be obtained by using B<xev>(1) command or 1153Due the the large number of modifier combinations, a key mapping will
1158searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1154match if I<at least> the specified identifiers are being set, and no other
1155key mappings with those and more bits are being defined. That means that
1156defining a mapping for C<a> will automatically provide definitions for
1157C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1158themselves. See the C<builtin:> action, below, for a way to work around
1159this when this is a problem.
1160
1161The spelling of I<key> depends on your implementation of X. An easy way to
1162find a key name is to use the B<xev>(1) command. You can find a list by
1163looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1159omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1164the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1160keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1165value (B<0x0000 - 0xFFFF>).
1161performed in an exact manner; however, the closest match is assured.
1162 1166
1163I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1167As with any resource value, the I<action> string may contain backslash
1168escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1164number), see RESOURCES in C<man 7 X> for further details. 1169number), see RESOURCES in C<man 7 X> for further details.
1165 1170
1166You can define a range of keysyms in one shot by providing a I<string> 1171An action starts with an action prefix that selects a certain type
1167with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1172of action, followed by a colon. An action string without colons is
1173interpreted as a literal string to pass to the tty (as if it was
1174prefixed with C<string:>).
1175
1176The following action prefixes are known - extensions can provide
1177additional prefixes:
1178
1179=over
1180
1181=item string:STRING
1182
1183If the I<action> starts with C<string:> (or otherwise contains no colons),
1184then the remaining C<STRING> will be passed to the program running in the
1185terminal. For example, you could replace whatever Shift-Tab outputs by the
1186string C<echo rm -rf /> followed by a newline:
1187
1188 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1189
1190This could in theory be used to completely redefine your keymap.
1191
1192In addition, for actions of this type, you can define a range of
1193keysyms in one shot by loading the C<keysym-list> perl extension and
1194providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1168should be a character not used by the strings. 1195the delimiter `/' should be a character not used by the strings.
1169 1196
1170Its usage can be demonstrated by an example: 1197Its usage can be demonstrated by an example:
1171 1198
1172 URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|> 1199 URxvt.keysym.M-C-0x61: list|\033<|abc|>
1173 1200
1174The above line is equivalent to the following three lines: 1201The above line is equivalent to the following three lines:
1175 1202
1176 URxvt.keysym.Meta-Control-0x61: \033<M-C-a> 1203 URxvt.keysym.Meta-Control-0x61: string:\033<a>
1177 URxvt.keysym.Meta-Control-0x62: \033<M-C-b> 1204 URxvt.keysym.Meta-Control-0x62: string:\033<b>
1178 URxvt.keysym.Meta-Control-0x63: \033<M-C-c> 1205 URxvt.keysym.Meta-Control-0x63: string:\033<c>
1179 1206
1207=item command:STRING
1208
1180If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1209If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1181is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1210is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1211the opposite of C<string:> - instead of sending it to the program running
1212in the terminal, it will be treated as if it were program output). This is
1213most useful to feed command sequences into @@RXVT_NAME@@.
1214
1182example the following means "change the current locale to C<zh_CN.GBK> 1215For example the following means "change the current locale to C<zh_CN.GBK>
1183when Control-Meta-c is being pressed": 1216when Control-Meta-c is being pressed":
1184 1217
1185 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1218 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1186 1219
1187If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1220The following example will map Control-Meta-1 and Control-Meta-2 to
1188is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3) 1221the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1189manpage. For example, the F<selection> extension (activated via 1222font-switching at runtime:
1190C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1191 1223
1192 URxvt.keysym.M-C-c: perl:selection:rot13 1224 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1225 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1193 1226
1194Due the the large number of modifier combinations, a defined key mapping 1227Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1195will match if I<at least> the specified identifiers are being set, and 1228info):
1196no other key mappings with those and more bits are being defined. That
1197means that defining a key map for C<a> will automatically provide
1198definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1199mappings themselves.
1200 1229
1201Unfortunately, this will override built-in key mappings. For example 1230 URxvt.keysym.M-C-3: command:\033[8;25;80t
1231 URxvt.keysym.M-C-4: command:\033[8;48;110t
1232
1233=item builtin:
1234
1235The builtin action is the action that @@RXVT_NAME@@ would execute if no
1236key binding existed for the key combination. The obvious use is to undo
1237the effect of existing bindings. The not so obvious use is to reinstate
1238bindings when another binding overrides too many modifiers.
1239
1202if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1240For example if you overwrite the C<Insert> key you will disable
1203C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1241@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1204user-defined keymap using the C<builtin:> replacement: 1242"holes" into the user-defined keymap using the C<builtin:> replacement:
1205 1243
1206 URxvt.keysym.Insert: <my insert key sequence> 1244 URxvt.keysym.Insert: <my insert key sequence>
1207 URxvt.keysym.S-Insert: builtin: 1245 URxvt.keysym.S-Insert: builtin:
1208 1246
1209The first line defines a mapping for C<Insert> and I<any> combination 1247The first line defines a mapping for C<Insert> and I<any> combination
1210of modifiers. The second line re-establishes the default mapping for 1248of modifiers. The second line re-establishes the default mapping for
1211C<Shift-Insert>. 1249C<Shift-Insert>.
1212 1250
1213The following example will map Control-Meta-1 and Control-Meta-2 to 1251=item builtin-string:
1214the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1215font-switching at runtime:
1216 1252
1217 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1253This action is mainly useful to restore string mappings for keys that
1218 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1254have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1255difficult to explain - basically, this action will send the string to the
1256application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1257action for it.
1219 1258
1220Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1259An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1221info): 1260selection when you press C<Shift-Insert>. With the following bindings, it
1261would instead emit the (undocumented, but what applications running in the
1262terminal might expect) sequence C<ESC [ 2 $> instead:
1222 1263
1223 URxvt.keysym.M-C-3: command:\033[8;25;80t 1264 URxvt.keysym.S-Insert: builtin-string:
1224 URxvt.keysym.M-C-4: command:\033[8;48;110t 1265 URxvt.keysym.C-S-Insert: builtin:
1266
1267The first line disables the paste functionality for that key
1268combination, and the second reinstates the default behaviour for
1269C<Control-Shift-Insert>, which would otherwise be overridden.
1270
1271Similarly, to let applications gain access to the C<C-M-c> (copy to
1272clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1273this:
1274
1275 URxvt.keysym.C-M-c: builtin-string:
1276 URxvt.keysym.C-M-v: builtin-string:
1277
1278=item EXTENSION:STRING
1279
1280An action of this form invokes the action B<STRING>, if any, provided
1281by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
1282be loaded automatically if necessary.
1283
1284Not all extensions define actions, but popular extensions that do
1285include the I<selection> and I<matcher> extensions (documented in their
1286own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1287respectively).
1288
1289From the silly examples department, this will rot13-"encrypt"
1290@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1291keyboards:
1292
1293 URxvt.keysym.M-C-c: selection:rot13
1294
1295=item perl:STRING *DEPRECATED*
1296
1297This is a deprecated way of invoking commands provided by perl
1298extensions. It is still supported, but should not be used anymore.
1299
1300=back
1225 1301
1226=item B<perl-ext-common>: I<string> 1302=item B<perl-ext-common>: I<string>
1227 1303
1228=item B<perl-ext>: I<string> 1304=item B<perl-ext>: I<string>
1229 1305
1230Comma-separated list(s) of perl extension scripts (default: C<default>) to 1306Comma-separated list(s) of perl extension scripts (default: C<default>) to
1231use in this terminal instance; option B<-pe>. 1307use in this terminal instance; option B<-pe>.
1232 1308
1233Extension names can be prefixed with a C<-> sign to prohibit using 1309Extension names can be prefixed with a C<-> sign to remove them again, in
1234them. This can be useful to selectively disable some extensions loaded 1310case they had been specified earlier. This can be useful to selectively
1235by default, or specified via the C<perl-ext-common> resource. For 1311disable some extensions loaded by default, or specified via the
1236example, C<default,-selection> will use all the default extension except 1312C<perl-ext-common> resource. For example, C<default,-selection> will use
1237C<selection>. 1313all the default extensions except C<selection>.
1238 1314
1239Extension names can also be followed by an argument in angle brackets 1315To prohibit autoloading of extensions, you can prefix them with C</>,
1240(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1316which will make urxvt refuse to automatically load them (this can be
1241searchable scrollback to Alt/Meta-s). Mentioning the same extension 1317overriden, however, by specifying the extension name again without a
1242multiple times with different arguments will pass multiple arguments to 1318prefix, though). This does not prohibit extensions themselves loading
1243the extension. 1319other extensions. For example, C<default,/background> will keep the
1320C<background> extension from being loaded when a background OSC sequence
1321is received.
1322
1323The default set includes the C<selection>, C<option-popup>,
1324C<selection-popup>, C<readline>, C<searchable-scrollback> and
1325C<confirm-paste> extensions, as well as any extensions which are mentioned
1326in B<keysym> resources.
1327
1328Any extension such that a corresponding resource is given on the
1329command line is automatically appended to B<perl-ext>.
1244 1330
1245Each extension is looked up in the library directories, loaded if 1331Each extension is looked up in the library directories, loaded if
1246necessary, and bound to the current terminal instance. 1332necessary, and bound to the current terminal instance. When the library
1333search path contains multiple extension files of the same name, then the
1334first one found will be used.
1247 1335
1248If both of these resources are the empty string, then the perl 1336If both of these resources are the empty string, then the perl interpreter
1249interpreter will not be initialized. The idea behind two options is that 1337will not be initialized. The rationale for having two options is that
1250B<perl-ext-common> will be used for extensions that should be available to 1338B<perl-ext-common> will be used for extensions that should be available to
1251all instances, while B<perl-ext> is used for specific instances. 1339all instances, while B<perl-ext> is used for specific instances.
1252 1340
1253=item B<perl-eval>: I<string> 1341=item B<perl-eval>: I<string>
1254 1342
… …
1256the @@RXVT_NAME@@perl(3) manpage. 1344the @@RXVT_NAME@@perl(3) manpage.
1257 1345
1258=item B<perl-lib>: I<path> 1346=item B<perl-lib>: I<path>
1259 1347
1260Colon-separated list of additional directories that hold extension 1348Colon-separated list of additional directories that hold extension
1261scripts. When looking for extensions specified by the C<perl> resource, 1349scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1262@@RXVT_NAME@@ will first look in these directories and then in 1350in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1263F<@@RXVT_LIBDIR@@/urxvt/perl/>. 1351lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1264 1352
1265See the @@RXVT_NAME@@perl(3) manpage. 1353See the @@RXVT_NAME@@perl(3) manpage.
1266 1354
1267=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1355=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1268 1356
… …
1272=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1360=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1273 1361
1274Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1362Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1275for details. 1363for details.
1276 1364
1277=item B<searchable-scrollback:> I<keysym> 1365=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1278 1366
1279Sets the hotkey that starts the incremental scrollback buffer search 1367This resource is deprecated and will be removed. Use a B<keysym> resource
1280(default: C<M-s>). 1368instead, e.g.:
1281 1369
1370 URxvt.keysym.M-s: searchable-scrollback:start
1371
1282=item B<urlLauncher>: I<string> 1372=item B<url-launcher>: I<string>
1283 1373
1284Specifies the program to be started with a URL argument. Used by the 1374Specifies the program to be started with a URL argument. Used by the
1285C<selection-popup> and C<matcher> perl extensions. 1375C<selection-popup> and C<matcher> perl extensions.
1286 1376
1287=item B<transient-for>: I<windowid> 1377=item B<transient-for>: I<windowid>
… …
1331=head1 THE SELECTION: SELECTING AND PASTING TEXT 1421=head1 THE SELECTION: SELECTING AND PASTING TEXT
1332 1422
1333The behaviour of text selection and insertion/pasting mechanism is similar 1423The behaviour of text selection and insertion/pasting mechanism is similar
1334to I<xterm>(1). 1424to I<xterm>(1).
1335 1425
1336=over 4 1426=over
1337 1427
1338=item B<Selecting>: 1428=item B<Selecting>:
1339 1429
1340Left click at the beginning of the region, drag to the end of the region 1430Left click at the beginning of the region, drag to the end of the region
1341and release; Right click to extend the marked region; Left double-click 1431and release; Right click to extend the marked region; Left double-click
… …
1356B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1446B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1357 1447
1358Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1448Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1359inserted too. 1449inserted too.
1360 1450
1451rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1452<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1453binding causes the value of the internal selection to be copied to the
1454CLIPBOARD selection, while the second binding causes the value of the
1455CLIPBOARD selection to be inserted.
1456
1361=back 1457=back
1362 1458
1363=head1 CHANGING FONTS 1459=head1 CHANGING FONTS
1364 1460
1365Changing fonts (or font sizes, respectively) via the keypad is not yet 1461Changing fonts (or font sizes, respectively) via the keypad is not yet
… …
1382and character codes using the keyboard. It consists of 4 parts. The 1478and character codes using the keyboard. It consists of 4 parts. The
1383first part is available if rxvt-unicode has been compiled with 1479first part is available if rxvt-unicode has been compiled with
1384C<--enable-frills>, the rest is available when rxvt-unicode was compiled 1480C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1385with C<--enable-iso14755>. 1481with C<--enable-iso14755>.
1386 1482
1387=over 4 1483=over
1388 1484
1389=item * 5.1: Basic method 1485=item * 5.1: Basic method
1390 1486
1391This allows you to enter unicode characters using their hexcode. 1487This allows you to enter unicode characters using their hexcode.
1392 1488
… …
1453In addition to the default foreground and background colours, 1549In addition to the default foreground and background colours,
1454B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus 1550B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1455high-intensity (potentially bold/blink) versions of the same, and 72 (or 1551high-intensity (potentially bold/blink) versions of the same, and 72 (or
1456240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB 1552240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1457cube plus a 8 (24) colour greyscale ramp. 1553cube plus a 8 (24) colour greyscale ramp.
1554
1555B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
1556C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
1557number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
1558colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
155924-bit colour space. When indexing collisions happen, the nearest old colour in
1560the cube will be adapted to the new 24-bit RGB colour. That means one cannot
1561use many similar 24-bit colours. It's typically not a problem in common
1562scenarios.
1458 1563
1459Here is a list of the ANSI colours with their names. 1564Here is a list of the ANSI colours with their names.
1460 1565
1461=begin table 1566=begin table
1462 1567
… …
1489The following text gives values for the standard 88 colour mode (and 1594The following text gives values for the standard 88 colour mode (and
1490values for the 256 colour mode in parentheses). 1595values for the 256 colour mode in parentheses).
1491 1596
1492The RGB cube uses indices 16..79 (16..231) using the following formulas: 1597The RGB cube uses indices 16..79 (16..231) using the following formulas:
1493 1598
1494 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3 1599 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1495 index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15 1600 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1496 1601
1497The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10% 1602The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1498steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of 1603steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1499the RGB cube. 1604the RGB cube.
1500 1605
… …
1516White. 1621White.
1517 1622
1518=head2 ALPHA CHANNEL SUPPORT 1623=head2 ALPHA CHANNEL SUPPORT
1519 1624
1520If Xft support has been compiled in and as long as Xft/Xrender/X don't get 1625If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1521their act together, rxvt-unicode will do it's own alpha channel management: 1626their act together, rxvt-unicode will do its own alpha channel management:
1522 1627
1523You can prefix any colour with an opaqueness percentage enclosed in 1628You can prefix any colour with an opaqueness percentage enclosed in
1524brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage 1629brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1525(0-100) that specifies the opacity of the colour, where C<0> is completely 1630(0-100) that specifies the opacity of the colour, where C<0> is completely
1526transparent and C<100> is completely opaque. For example, C<[50]red> is a 1631transparent and C<100> is completely opaque. For example, C<[50]red> is a
… …
1563 1668
1564=head1 ENVIRONMENT 1669=head1 ENVIRONMENT
1565 1670
1566B<@@RXVT_NAME@@> sets and/or uses the following environment variables: 1671B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1567 1672
1568=over 4 1673=over
1569 1674
1570=item B<TERM> 1675=item B<TERM>
1571 1676
1572Normally set to C<rxvt-unicode>, unless overwritten at configure time, via 1677Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1573resources or on the command line. 1678resources or on the command line.
… …
1608 1713
1609=item B<SHELL> 1714=item B<SHELL>
1610 1715
1611The shell to be used for command execution, defaults to C</bin/sh>. 1716The shell to be used for command execution, defaults to C</bin/sh>.
1612 1717
1613=item B<RXVT_SOCKET> 1718=item B<RXVT_SOCKET> [I<sic>]
1614 1719
1615The unix domain socket path used by @@RXVT_NAME@@c(1) and 1720The unix domain socket path used by @@RXVT_NAME@@c(1) and
1616@@RXVT_NAME@@d(1). 1721@@RXVT_NAME@@d(1).
1617 1722
1618Default F<<< $HOME/.rxvt-unicode-I<< <nodename> >> >>>. 1723Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1724
1725=item B<URXVT_PERL_LIB>
1726
1727Additional F<:>-separated library search path for perl extensions. Will be
1728searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1729directory.
1730
1731=item B<URXVT_PERL_VERBOSITY>
1732
1733See L<@@RXVT_NAME@@perl>(3).
1619 1734
1620=item B<HOME> 1735=item B<HOME>
1621 1736
1622Used to locate the default directory for the unix domain socket for 1737Used to locate the default directory for the unix domain socket for
1623daemon communications and to locate various resource files (such as 1738daemon communications and to locate various resource files (such as
… …
1634 1749
1635=back 1750=back
1636 1751
1637=head1 FILES 1752=head1 FILES
1638 1753
1639=over 4 1754=over
1640 1755
1641=item B</usr/lib/X11/rgb.txt> 1756=item B</usr/lib/X11/rgb.txt>
1642 1757
1643Colour names. 1758Colour names.
1644 1759
1645=back 1760=back
1646 1761
1647=head1 SEE ALSO 1762=head1 SEE ALSO
1648 1763
1764@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1649@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1765@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1650 1766
1651=head1 CURRENT PROJECT COORDINATOR 1767=head1 CURRENT PROJECT COORDINATOR
1652 1768
1653=over 4 1769=over
1654 1770
1655=item Project Coordinator 1771=item Project Coordinator
1656 1772
1657Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1773Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1658 1774
1659L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1775L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1660 1776
1661=back 1777=back
1662 1778
1663=head1 AUTHORS 1779=head1 AUTHORS
1664 1780
1665=over 4 1781=over
1666 1782
1667=item John Bovey 1783=item John Bovey
1668 1784
1669University of Kent, 1992, wrote the original Xvt. 1785University of Kent, 1992, wrote the original Xvt.
1670 1786
1671=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1787=item Rob Nation <nation@rocket.sanders.lockheed.com>
1672 1788
1673very heavily modified Xvt and came up with Rxvt 1789very heavily modified Xvt and came up with Rxvt
1674 1790
1675=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1791=item Angelo Haritsis <ah@doc.ic.ac.uk>
1676 1792
1677wrote the Greek Keyboard Input (no longer in code) 1793wrote the Greek Keyboard Input (no longer in code)
1678 1794
1679=item mj olesen L<< <olesen@me.QueensU.CA> >> 1795=item mj olesen <olesen@me.QueensU.CA>
1680 1796
1681Wrote the menu system. 1797Wrote the menu system.
1682 1798
1683Project Coordinator (changes.txt 2.11 to 2.21) 1799Project Coordinator (changes.txt 2.11 to 2.21)
1684 1800
1685=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1801=item Oezguer Kesim <kesim@math.fu-berlin.de>
1686 1802
1687Project Coordinator (changes.txt 2.21a to 2.4.5) 1803Project Coordinator (changes.txt 2.21a to 2.4.5)
1688 1804
1689=item Geoff Wing L<< <gcw@pobox.com> >> 1805=item Geoff Wing <gcw@pobox.com>
1690 1806
1691Rewrote screen display and text selection routines. 1807Rewrote screen display and text selection routines.
1692 1808
1693Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1809Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1694 1810
1695=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1811=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1696 1812
1697Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1813Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1698extension, random hacks, numerous bugfixes and extensions. 1814extension, random hacks, numerous bugfixes and extensions.
1699 1815
1700Project Coordinator (Changes 1.0 -) 1816Project Coordinator (Changes 1.0 -)
1701 1817
1702=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1818=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1703 1819
1704pty/utmp code rewrite, image code improvements, many random hacks and bugfixes. 1820pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1705 1821
1706=back 1822=back
1707 1823

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines