ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.204 by sf-exg, Sun Aug 14 22:01:25 2011 UTC vs.
Revision 1.258 by root, Mon Nov 22 17:01:36 2021 UTC

… …
84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1 84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85Orange'. 85Orange'.
86 86
87The following options are available: 87The following options are available:
88 88
89=over 4 89=over
90 90
91=item B<-help>, B<--help> 91=item B<-help>, B<--help>
92 92
93Print out a message describing available options. 93Print out a message describing available options.
94 94
… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
114possible visual ids) instead of the default, and also allocate a private
115colormap. All visual types except for DirectColor are supported.
116
111=item B<-geometry> I<geom> 117=item B<-geometry> I<geom>
112 118
113Window geometry (B<-g> still respected); resource B<geometry>. 119Window geometry (B<-g> still respected); resource B<geometry>.
114 120
115=item B<-rv>|B<+rv> 121=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 127Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 128
123=item B<-ss>|B<+ss> 129=item B<-ss>|B<+ss>
124 130
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 131Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133 132
134=item B<-fade> I<number> 133=item B<-fade> I<number>
135 134
136Fade the text by the given percentage when focus is lost. Small values 135Fade the text by the given percentage when focus is lost. Small values
137fade a little only, 100 completely replaces all colours by the fade 136fade a little only, 100 completely replaces all colours by the fade
… …
140=item B<-fadecolor> I<colour> 139=item B<-fadecolor> I<colour>
141 140
142Fade to this colour when fading is used (see B<-fade>). The default colour 141Fade to this colour when fading is used (see B<-fade>). The default colour
143is opaque black. resource B<fadeColor>. 142is opaque black. resource B<fadeColor>.
144 143
145=item B<-tint> I<colour>
146
147Tint the transparent background with the given colour;
148resource I<tintColor>.
149
150=item B<-sh> I<number>
151
152Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153A value of 100 means no shading; resource I<shading>.
154
155=item B<-blt> I<string>
156
157Specify background blending type. If background pixmap is specified
158at the same time as transparency - such pixmap will be blended over
159the transparent background, using the method specified. Supported values are:
160B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165=item B<-blr> I<HxV>
166
167Apply Gaussian Blur with the specified radii to the transparent
168background. If a single number is specified - both vertical and
169horizontal radii are considered to be the same. Setting one of the
170radii to 1 and another to a large number creates interesting effects
171on some backgrounds. Maximum radius value is 128;
172resource I<blurRadius>.
173
174=item B<-icon> I<file> 144=item B<-icon> I<file>
175 145
176Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This 146Compile I<pixbuf>: Use the specified image as application icon. This
177is used by many window managers, taskbars and pagers to represent the 147is used by many window managers, taskbars and pagers to represent the
178application window; resource I<iconFile>. 148application window; resource I<iconFile>.
179 149
180=item B<-bg> I<colour> 150=item B<-bg> I<colour>
181 151
182Window background colour; resource B<background>. 152Window background colour; resource B<background>.
183 153
184=item B<-fg> I<colour> 154=item B<-fg> I<colour>
185 155
186Window foreground colour; resource B<foreground>. 156Window foreground colour; resource B<foreground>.
187
188=item B<-pixmap> I<file[;oplist]>
189
190Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
191optionally specify a list of operations to modify it. Note you may need to
192add quotes to avoid special shell interpretation of the C<;> in the
193command-line; for more details see resource B<backgroundPixmap>.
194 157
195=item B<-cr> I<colour> 158=item B<-cr> I<colour>
196 159
197The cursor colour; resource B<cursorColor>. 160The cursor colour; resource B<cursorColor>.
198 161
… …
257 220
258=item B<-ls>|B<+ls> 221=item B<-ls>|B<+ls>
259 222
260Start as a login-shell/sub-shell; resource B<loginShell>. 223Start as a login-shell/sub-shell; resource B<loginShell>.
261 224
225=item B<-mc> I<milliseconds>
226
227Specify the maximum time between multi-click selections.
228
262=item B<-ut>|B<+ut> 229=item B<-ut>|B<+ut>
263 230
264Compile I<utmp>: Inhibit/enable writing a utmp entry; resource 231Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265B<utmpInhibit>. 232B<utmpInhibit>.
266 233
… …
344 311
345=item B<-override-redirect> 312=item B<-override-redirect>
346 313
347Compile I<frills>: Sets override-redirect on the window; resource 314Compile I<frills>: Sets override-redirect on the window; resource
348B<override-redirect>. 315B<override-redirect>.
316
317=item B<-dockapp>
318
319Sets the initial state of the window to WithdrawnState, which makes
320window managers that support this extension treat it as a dockapp.
349 321
350=item B<-sbg> 322=item B<-sbg>
351 323
352Compile I<frills>: Disable the usage of the built-in block graphics/line 324Compile I<frills>: Disable the usage of the built-in block graphics/line
353drawing characters and just rely on what the specified fonts provide. Use 325drawing characters and just rely on what the specified fonts provide. Use
… …
408=item B<-pt> I<style> 380=item B<-pt> I<style>
409 381
410Compile I<XIM>: input style for input method; B<OverTheSpot>, 382Compile I<XIM>: input style for input method; B<OverTheSpot>,
411B<OffTheSpot>, B<Root>; resource B<preeditType>. 383B<OffTheSpot>, B<Root>; resource B<preeditType>.
412 384
385If the perl extension C<xim-onthespot> is used (which is the default),
386then additionally the C<OnTheSpot> preedit type is available.
387
413=item B<-im> I<text> 388=item B<-im> I<text>
414 389
415Compile I<XIM>: input method name. resource B<inputMethod>. 390Compile I<XIM>: input method name. resource B<inputMethod>.
416 391
417=item B<-imlocale> I<string> 392=item B<-imlocale> I<string>
… …
431Change the meaning of triple-click selection with the left mouse 406Change the meaning of triple-click selection with the left mouse
432button. Only effective when the original (non-perl) selection code is 407button. Only effective when the original (non-perl) selection code is
433in-use. Instead of selecting a full line it will extend the selection to 408in-use. Instead of selecting a full line it will extend the selection to
434the end of the logical line only. resource B<tripleclickwords>. 409the end of the logical line only. resource B<tripleclickwords>.
435 410
411=item B<-dpb>|B<+dpb>
412
413Compile frills: Disable (or enable) emitting bracketed paste mode
414sequences (default enabled). Bracketed paste mode allows programs
415to detect when something is pasted. Since more and more programs
416abuse this, these sequences can be disabled. The command sequences to
417enable and query paste mode will still work, but the actual bracket
418sequences will no longer be emitted. You can also toggle this from the
419ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
420
436=item B<-insecure> 421=item B<-insecure>
437 422
438Enable "insecure" mode, which currently enables most of the escape 423Enable "insecure" mode, which currently enables most of the escape
439sequences that echo strings. See the resource B<insecure> for more 424sequences that echo strings. See the resource B<insecure> for more
440info. 425info.
… …
452 437
453=item B<-ssr>|B<+ssr> 438=item B<-ssr>|B<+ssr>
454 439
455Turn on/off secondary screen scroll (default enabled); resource 440Turn on/off secondary screen scroll (default enabled); resource
456B<secondaryScroll>. 441B<secondaryScroll>.
442
443=item B<-rm> I<mode>
444
445Compile I<frills>: Sets long line rewrapping behaviour on window resizes
446to one of B<auto> (the default), B<always> or B<never>. The latter two
447modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
448is non-empty, and wings lines (acts like B<never>) otherwise; resource
449B<rewrapMode>.
457 450
458=item B<-hold>|B<+hold> 451=item B<-hold>|B<+hold>
459 452
460Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ 453Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
461will not immediately destroy its window when the program executed within 454will not immediately destroy its window when the program executed within
… …
539 close $pty; 532 close $pty;
540 533
541 # now communicate with rxvt 534 # now communicate with rxvt
542 my $slave = $pty->slave; 535 my $slave = $pty->slave;
543 while (<$slave>) { print $slave "got <$_>\n" } 536 while (<$slave>) { print $slave "got <$_>\n" }
537
538Note that, despite what the name might imply, the file descriptor does not
539need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
540domain or tcp socket). While tty operations cannot be done in this case,
541B<@@RXVT_NAME@@> can still be remote controlled with it:
542
543 use Socket;
544 use Fcntl;
545
546 socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
547 fcntl $slave, Fcntl::F_SETFD, 0;
548 system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
549 close $slave;
550
551 syswrite $URXVT, "Type a secret password: ";
552 my $secret = do { local $/ = "\r"; <$URXVT> };
553 print "Not so secret anymore: $secret\n";
544 554
545=item B<-pe> I<string> 555=item B<-pe> I<string>
546 556
547Comma-separated list of perl extension scripts to use (or not to use) in 557Comma-separated list of perl extension scripts to use (or not to use) in
548this terminal instance. See resource B<perl-ext> for details. 558this terminal instance. See resource B<perl-ext> for details.
… …
576be used. Command-line arguments can be used to override resource 586be used. Command-line arguments can be used to override resource
577settings. The following resources are supported (you might want to 587settings. The following resources are supported (you might want to
578check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl 588check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
579extensions not documented here): 589extensions not documented here):
580 590
581=over 4 591=over
582 592
583=item B<depth:> I<bitdepth> 593=item B<depth:> I<bitdepth>
584 594
585Compile I<xft>: Attempt to find a visual with the given bit depth; 595Compile I<xft>: Attempt to find a visual with the given bit depth;
586option B<-depth>. 596option B<-depth>.
… …
687 697
688B<False>: specify that everything is to be displayed, even 698B<False>: specify that everything is to be displayed, even
689if the refresh is too fast for the human eye to read anything (or the 699if the refresh is too fast for the human eye to read anything (or the
690monitor to display anything); option B<+ss>. 700monitor to display anything); option B<+ss>.
691 701
692=item B<transparent:> I<boolean>
693
694Turn on/off pseudo-transparency by using the root pixmap as background.
695
696B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
697future versions.
698
699=item B<fading:> I<number> 702=item B<fading:> I<number>
700 703
701Fade the text by the given percentage when focus is lost; option B<-fade>. 704Fade the text by the given percentage when focus is lost; option B<-fade>.
702 705
703=item B<fadeColor:> I<colour> 706=item B<fadeColor:> I<colour>
704 707
705Fade to this colour, when fading is used (see B<fading:>). The default 708Fade to this colour, when fading is used (see B<fading:>). The default
706colour is black; option B<-fadecolor>. 709colour is black; option B<-fadecolor>.
707 710
708=item B<tintColor:> I<colour>
709
710Tint the transparent background with the given colour. If the RENDER
711extension is not available only black, red, green, yellow, blue,
712magenta, cyan and white tints can be performed server-side. Note that
713a black tint yields a completely black image while a white tint yields
714the image unchanged; option B<-tint>.
715
716=item B<shading:> I<number>
717
718Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
719A value of 100 means no shading; option B<-sh>.
720
721=item B<blendType:> I<string>
722
723Specify background blending type; option B<-blt>.
724
725=item B<blurRadius:> I<number>
726
727Apply gaussian blur with the specified radius to the transparent
728background; option B<-blr>.
729
730=item B<iconFile:> I<file> 711=item B<iconFile:> I<file>
731 712
732Set the application icon pixmap; option B<-icon>. 713Set the application icon pixmap; option B<-icon>.
733 714
734=item B<scrollColor:> I<colour> 715=item B<scrollColor:> I<colour>
… …
742 723
743=item B<borderColor:> I<colour> 724=item B<borderColor:> I<colour>
744 725
745The colour of the border around the text area and between the scrollbar 726The colour of the border around the text area and between the scrollbar
746and the text. 727and the text.
747
748=item B<backgroundPixmap:> I<file[;oplist]>
749
750Use the specified image file for the background and also
751optionally specify a colon separated list of operations to modify it.
752Supported operations are:
753
754 B<WxH+X+Y> sets scale and position. B<"W" / "H"> specify the
755 horizontal/vertical scale (percent), and B<"X" / "Y">
756 locate the image centre (percent). A scale of 0 disables
757 scaling. The maximum permitted scale is 1000.
758 op=tile enables tiling
759 op=pscale enables proportional scaling
760 op=root use the position of the terminal window relative to the root
761 window as the image offset, simulating a root window background
762
763The default scale and position setting is C<100x100+50+50>.
764Alternatively, a predefined set of templates can be used to achieve
765the most common setups:
766
767 style=tiled the image is tiled with no scaling
768 style=aspect-stretched the image is scaled to fill the whole window maintaining
769 the aspect ratio and centered
770 style=stretched the image is scaled to fill the whole window
771 style=centered the image is centered with no scaling
772 style=root-tiled the image is tiled with no scaling and using 'op=root' positioning
773
774If multiple templates are specified the last one wins. Note that a
775template overrides all the scale, position and operations settings.
776Indeed, the templates can be specified in terms of low level settings
777as follows:
778
779 style=tiled 0x0+0+0:op=tile
780 style=aspect-stretched 100x100+50+50:op=pscale
781 style=stretched 100x100
782 style=centered 0x0+50+50
783 style=root-tiled 0x0:op=tile:op=root
784
785If used in conjunction with B<-tr> option, the specified pixmap will be
786blended over the transparent background using alpha-blending. If I<afterimage>
787support has been compiled in it is possible to choose other blending
788types with B<-blt "type"> option.
789
790=item B<path:> I<path>
791
792Specify the colon-delimited search path for finding background image files.
793 728
794=item B<font:> I<fontlist> 729=item B<font:> I<fontlist>
795 730
796Select the fonts to be used. This is a comma separated list of font names 731Select the fonts to be used. This is a comma separated list of font names
797that are checked in order when trying to find glyphs for characters. The 732that are checked in order when trying to find glyphs for characters. The
… …
894 829
895B<True>: start as a login shell by prepending a `-' to B<argv[0]> of 830B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
896the shell; option B<-ls>. B<False>: start as a normal sub-shell 831the shell; option B<-ls>. B<False>: start as a normal sub-shell
897[default]; option B<+ls>. 832[default]; option B<+ls>.
898 833
834=item B<multiClickTime:> I<number>
835
836Specify the maximum time in milliseconds between multi-click select
837events. The default is 500 milliseconds; option B<-mc>.
838
899=item B<utmpInhibit:> I<boolean> 839=item B<utmpInhibit:> I<boolean>
900 840
901B<True>: inhibit writing record into the system log file B<utmp>; 841B<True>: inhibit writing record into the system log file B<utmp>;
902option B<-ut>. B<False>: write record into the system log file B<utmp> 842option B<-ut>. B<False>: write record into the system log file B<utmp>
903[default]; option B<+ut>. 843[default]; option B<+ut>.
… …
966are not passed onto the shell; option B<-sk>. B<False>: do not scroll to 906are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
967bottom when a non-special key is pressed; option B<+sk>. 907bottom when a non-special key is pressed; option B<+sk>.
968 908
969=item B<saveLines:> I<number> 909=item B<saveLines:> I<number>
970 910
971Save I<number> lines in the scrollback buffer [default 64]. This 911Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
972resource is limited on most machines to 65535; option B<-sl>.
973 912
974=item B<internalBorder:> I<number> 913=item B<internalBorder:> I<number>
975 914
976Internal border of I<number> pixels. This resource is limited to 100; 915Internal border of I<number> pixels. This resource is limited to 100;
977option B<-b>. 916option B<-b>.
… …
1040 979
1041=item B<pointerColor2:> I<colour> 980=item B<pointerColor2:> I<colour>
1042 981
1043Mouse pointer background colour. 982Mouse pointer background colour.
1044 983
984=item B<pointerShape:> I<string>
985
986Compile I<frills>: Specifies the name of the mouse pointer shape
987[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
988file for possible values (omit the C<XC_> prefix).
989
1045=item B<pointerBlankDelay:> I<number> 990=item B<pointerBlankDelay:> I<number>
1046 991
1047Specifies number of seconds before blanking the pointer [default 2]. Use a 992Specifies number of seconds before blanking the pointer [default 2]. Use a
1048large number (e.g. C<987654321>) to effectively disable the timeout. 993large number (e.g. C<987654321>) to effectively disable the timeout.
1049 994
… …
1075 1020
1076B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> 1021B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
1077 1022
1078=item B<preeditType:> I<style> 1023=item B<preeditType:> I<style>
1079 1024
1080B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. 1025B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1081 1026
1082=item B<inputMethod:> I<name> 1027=item B<inputMethod:> I<name>
1083 1028
1084I<name> of inputMethod to use; option B<-im>. 1029I<name> of inputMethod to use; option B<-im>.
1085 1030
… …
1103 1048
1104Change the meaning of triple-click selection with the left mouse 1049Change the meaning of triple-click selection with the left mouse
1105button. Instead of selecting a full line it will extend the selection to 1050button. Instead of selecting a full line it will extend the selection to
1106the end of the logical line only; option B<-tcw>. 1051the end of the logical line only; option B<-tcw>.
1107 1052
1053=item B<disablePasteBrackets:> I<boolean>
1054
1055Prevent emission of paste bracket sequences; option B<-dpb>.
1056
1108=item B<insecure:> I<boolean> 1057=item B<insecure:> I<boolean>
1109 1058
1110Enables "insecure" mode. Rxvt-unicode offers some escape sequences that 1059Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1111echo arbitrary strings like the icon name or the locale. This could be 1060echo arbitrary strings like the icon name or the locale. This could be
1112abused if somebody gets 8-bit-clean access to your display, whether 1061abused if somebody gets 8-bit-clean access to your display, whether
1113through a mail client displaying mail bodies unfiltered or through 1062through a mail client displaying mail bodies unfiltered or through
1114write(1) or any other means. Therefore, these sequences are disabled by 1063write(1) or any other means. Therefore, these sequences are disabled by
1115default. (Note that many other terminals, including xterm, have these 1064default. (Note that many other terminals, including xterm, have these
… …
1133 1082
1134=item B<secondaryScreen:> I<boolean> 1083=item B<secondaryScreen:> I<boolean>
1135 1084
1136Turn on/off secondary screen (default enabled). 1085Turn on/off secondary screen (default enabled).
1137 1086
1087=item B<rewrapMode:> I<mode>
1088
1089Sets long line rewrap behaviour on window resize to one of B<auto>
1090(default), B<always> or B<never>.
1091
1138=item B<secondaryScroll:> I<boolean> 1092=item B<secondaryScroll:> I<boolean>
1139 1093
1140Turn on/off secondary screen scroll (default enabled). If this 1094Turn on/off secondary screen scroll (default enabled). If this
1141option is enabled, scrolls on the secondary screen will change the 1095option is enabled, scrolls on the secondary screen will change the
1142scrollback buffer and, when secondaryScreen is off, switching 1096scrollback buffer and, when secondaryScreen is off, switching
… …
1154Sets the working directory for the shell (or the command specified via 1108Sets the working directory for the shell (or the command specified via
1155B<-e>). The I<path> must be an absolute path and it must exist for 1109B<-e>). The I<path> must be an absolute path and it must exist for
1156@@RXVT_NAME@@ to start. If it isn't specified then the current working 1110@@RXVT_NAME@@ to start. If it isn't specified then the current working
1157directory will be used; option B<-cd>. 1111directory will be used; option B<-cd>.
1158 1112
1159=item B<keysym.>I<sym>: I<string> 1113=item B<keysym.>I<sym>: I<action>
1160 1114
1161Compile I<frills>: Associate I<string> with keysym I<sym>. The 1115Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1162intervening resource name B<keysym.> cannot be omitted. 1116resource name B<keysym.> cannot be omitted.
1163 1117
1164The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1118Using this resource, you can map key combinations such as
1165any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1119C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1166B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1120string than would normally result from that combination, making the
1167and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1121terminal scroll up or down the way you want it, or any other thing an
1168B<2>, B<3>, B<4>, B<5>. 1122extension might provide.
1123
1124The key combination that triggers the action, I<sym>, has the following format:
1125
1126 (modifiers-)key
1127
1128Where I<modifiers> can be any combination of the following full or
1129abbreviated modifier names:
1130
1131=begin table
1132
1133 B<ISOLevel3> B<I>
1134 B<AppKeypad> B<K>
1135 B<Control> B<C>
1136 B<NumLock> B<N>
1137 B<Shift> B<S>
1138 B<Meta> B<M> I<or> B<A>
1139 B<Lock> B<L>
1140 B<Mod1> B<1>
1141 B<Mod2> B<2>
1142 B<Mod3> B<3>
1143 B<Mod4> B<4>
1144 B<Mod5> B<5>
1145
1146=end table
1169 1147
1170The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1148The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1171whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1149whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1172keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1150keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1173current application keymap mode state. 1151current application keymap mode state.
1174 1152
1175The spellings of I<key> can be obtained by using B<xev>(1) command or 1153Due the the large number of modifier combinations, a key mapping will
1176searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1154match if I<at least> the specified identifiers are being set, and no other
1155key mappings with those and more bits are being defined. That means that
1156defining a mapping for C<a> will automatically provide definitions for
1157C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1158themselves. See the C<builtin:> action, below, for a way to work around
1159this when this is a problem.
1160
1161The spelling of I<key> depends on your implementation of X. An easy way to
1162find a key name is to use the B<xev>(1) command. You can find a list by
1163looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1177omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1164the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1178keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1165value (B<0x0000 - 0xFFFF>).
1179performed in an exact manner; however, the closest match is assured.
1180 1166
1181I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1167As with any resource value, the I<action> string may contain backslash
1168escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1182number), see RESOURCES in C<man 7 X> for further details. 1169number), see RESOURCES in C<man 7 X> for further details.
1183 1170
1184You can define a range of keysyms in one shot by providing a I<string> 1171An action starts with an action prefix that selects a certain type
1185with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1172of action, followed by a colon. An action string without colons is
1173interpreted as a literal string to pass to the tty (as if it was
1174prefixed with C<string:>).
1175
1176The following action prefixes are known - extensions can provide
1177additional prefixes:
1178
1179=over
1180
1181=item string:STRING
1182
1183If the I<action> starts with C<string:> (or otherwise contains no colons),
1184then the remaining C<STRING> will be passed to the program running in the
1185terminal. For example, you could replace whatever Shift-Tab outputs by the
1186string C<echo rm -rf /> followed by a newline:
1187
1188 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1189
1190This could in theory be used to completely redefine your keymap.
1191
1192In addition, for actions of this type, you can define a range of
1193keysyms in one shot by loading the C<keysym-list> perl extension and
1194providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1186should be a character not used by the strings. 1195the delimiter `/' should be a character not used by the strings.
1187 1196
1188Its usage can be demonstrated by an example: 1197Its usage can be demonstrated by an example:
1189 1198
1190 URxvt.keysym.M-C-0x61: list|\033<|abc|> 1199 URxvt.keysym.M-C-0x61: list|\033<|abc|>
1191 1200
1192The above line is equivalent to the following three lines: 1201The above line is equivalent to the following three lines:
1193 1202
1194 URxvt.keysym.Meta-Control-0x61: \033<a> 1203 URxvt.keysym.Meta-Control-0x61: string:\033<a>
1195 URxvt.keysym.Meta-Control-0x62: \033<b> 1204 URxvt.keysym.Meta-Control-0x62: string:\033<b>
1196 URxvt.keysym.Meta-Control-0x63: \033<c> 1205 URxvt.keysym.Meta-Control-0x63: string:\033<c>
1197 1206
1207=item command:STRING
1208
1198If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1209If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1199is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1210is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1211the opposite of C<string:> - instead of sending it to the program running
1212in the terminal, it will be treated as if it were program output). This is
1213most useful to feed command sequences into @@RXVT_NAME@@.
1214
1200example the following means "change the current locale to C<zh_CN.GBK> 1215For example the following means "change the current locale to C<zh_CN.GBK>
1201when Control-Meta-c is being pressed": 1216when Control-Meta-c is being pressed":
1202 1217
1203 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1218 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1204 1219
1205If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1220The following example will map Control-Meta-1 and Control-Meta-2 to
1206is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3) 1221the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1207manpage. For example, the F<selection> extension (activated via 1222font-switching at runtime:
1208C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1209 1223
1210 URxvt.keysym.M-C-c: perl:selection:rot13 1224 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1225 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1211 1226
1212Due the the large number of modifier combinations, a defined key mapping 1227Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1213will match if I<at least> the specified identifiers are being set, and 1228info):
1214no other key mappings with those and more bits are being defined. That
1215means that defining a key map for C<a> will automatically provide
1216definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1217mappings themselves.
1218 1229
1219Unfortunately, this will override built-in key mappings. For example 1230 URxvt.keysym.M-C-3: command:\033[8;25;80t
1231 URxvt.keysym.M-C-4: command:\033[8;48;110t
1232
1233=item builtin:
1234
1235The builtin action is the action that @@RXVT_NAME@@ would execute if no
1236key binding existed for the key combination. The obvious use is to undo
1237the effect of existing bindings. The not so obvious use is to reinstate
1238bindings when another binding overrides too many modifiers.
1239
1220if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1240For example if you overwrite the C<Insert> key you will disable
1221C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1241@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1222user-defined keymap using the C<builtin:> replacement: 1242"holes" into the user-defined keymap using the C<builtin:> replacement:
1223 1243
1224 URxvt.keysym.Insert: <my insert key sequence> 1244 URxvt.keysym.Insert: <my insert key sequence>
1225 URxvt.keysym.S-Insert: builtin: 1245 URxvt.keysym.S-Insert: builtin:
1226 1246
1227The first line defines a mapping for C<Insert> and I<any> combination 1247The first line defines a mapping for C<Insert> and I<any> combination
1228of modifiers. The second line re-establishes the default mapping for 1248of modifiers. The second line re-establishes the default mapping for
1229C<Shift-Insert>. 1249C<Shift-Insert>.
1230 1250
1231The following example will map Control-Meta-1 and Control-Meta-2 to 1251=item builtin-string:
1232the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1233font-switching at runtime:
1234 1252
1235 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1253This action is mainly useful to restore string mappings for keys that
1236 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1254have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1255difficult to explain - basically, this action will send the string to the
1256application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1257action for it.
1237 1258
1238Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1259An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1239info): 1260selection when you press C<Shift-Insert>. With the following bindings, it
1261would instead emit the (undocumented, but what applications running in the
1262terminal might expect) sequence C<ESC [ 2 $> instead:
1240 1263
1241 URxvt.keysym.M-C-3: command:\033[8;25;80t 1264 URxvt.keysym.S-Insert: builtin-string:
1242 URxvt.keysym.M-C-4: command:\033[8;48;110t 1265 URxvt.keysym.C-S-Insert: builtin:
1266
1267The first line disables the paste functionality for that key
1268combination, and the second reinstates the default behaviour for
1269C<Control-Shift-Insert>, which would otherwise be overridden.
1270
1271Similarly, to let applications gain access to the C<C-M-c> (copy to
1272clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1273this:
1274
1275 URxvt.keysym.C-M-c: builtin-string:
1276 URxvt.keysym.C-M-v: builtin-string:
1277
1278=item EXTENSION:STRING
1279
1280An action of this form invokes the action B<STRING>, if any, provided
1281by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
1282be loaded automatically if necessary.
1283
1284Not all extensions define actions, but popular extensions that do
1285include the I<selection> and I<matcher> extensions (documented in their
1286own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1287respectively).
1288
1289From the silly examples department, this will rot13-"encrypt"
1290@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1291keyboards:
1292
1293 URxvt.keysym.M-C-c: selection:rot13
1294
1295=item perl:STRING *DEPRECATED*
1296
1297This is a deprecated way of invoking commands provided by perl
1298extensions. It is still supported, but should not be used anymore.
1299
1300=back
1243 1301
1244=item B<perl-ext-common>: I<string> 1302=item B<perl-ext-common>: I<string>
1245 1303
1246=item B<perl-ext>: I<string> 1304=item B<perl-ext>: I<string>
1247 1305
1248Comma-separated list(s) of perl extension scripts (default: C<default>) to 1306Comma-separated list(s) of perl extension scripts (default: C<default>) to
1249use in this terminal instance; option B<-pe>. 1307use in this terminal instance; option B<-pe>.
1250 1308
1251Extension names can be prefixed with a C<-> sign to prohibit using 1309Extension names can be prefixed with a C<-> sign to remove them again, in
1252them. This can be useful to selectively disable some extensions loaded 1310case they had been specified earlier. This can be useful to selectively
1253by default, or specified via the C<perl-ext-common> resource. For 1311disable some extensions loaded by default, or specified via the
1254example, C<default,-selection> will use all the default extension except 1312C<perl-ext-common> resource. For example, C<default,-selection> will use
1255C<selection>. 1313all the default extensions except C<selection>.
1256 1314
1257Extension names can also be followed by an argument in angle brackets 1315To prohibit autoloading of extensions, you can prefix them with C</>,
1258(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1316which will make urxvt refuse to automatically load them (this can be
1259searchable scrollback to Alt/Meta-s). Mentioning the same extension 1317overriden, however, by specifying the extension name again without a
1260multiple times with different arguments will pass multiple arguments to 1318prefix, though). This does not prohibit extensions themselves loading
1261the extension. 1319other extensions. For example, C<default,/background> will keep the
1320C<background> extension from being loaded when a background OSC sequence
1321is received.
1322
1323The default set includes the C<selection>, C<option-popup>,
1324C<selection-popup>, C<readline>, C<searchable-scrollback> and
1325C<confirm-paste> extensions, as well as any extensions which are mentioned
1326in B<keysym> resources.
1327
1328Any extension such that a corresponding resource is given on the
1329command line is automatically appended to B<perl-ext>.
1262 1330
1263Each extension is looked up in the library directories, loaded if 1331Each extension is looked up in the library directories, loaded if
1264necessary, and bound to the current terminal instance. 1332necessary, and bound to the current terminal instance. When the library
1333search path contains multiple extension files of the same name, then the
1334first one found will be used.
1265 1335
1266If both of these resources are the empty string, then the perl 1336If both of these resources are the empty string, then the perl interpreter
1267interpreter will not be initialized. The idea behind two options is that 1337will not be initialized. The rationale for having two options is that
1268B<perl-ext-common> will be used for extensions that should be available to 1338B<perl-ext-common> will be used for extensions that should be available to
1269all instances, while B<perl-ext> is used for specific instances. 1339all instances, while B<perl-ext> is used for specific instances.
1270 1340
1271=item B<perl-eval>: I<string> 1341=item B<perl-eval>: I<string>
1272 1342
… …
1274the @@RXVT_NAME@@perl(3) manpage. 1344the @@RXVT_NAME@@perl(3) manpage.
1275 1345
1276=item B<perl-lib>: I<path> 1346=item B<perl-lib>: I<path>
1277 1347
1278Colon-separated list of additional directories that hold extension 1348Colon-separated list of additional directories that hold extension
1279scripts. When looking for extensions specified by the C<perl> resource, 1349scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1280@@RXVT_NAME@@ will first look in these directories and then in 1350in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1281F<@@RXVT_LIBDIR@@/urxvt/perl/>. 1351lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1282 1352
1283See the @@RXVT_NAME@@perl(3) manpage. 1353See the @@RXVT_NAME@@perl(3) manpage.
1284 1354
1285=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1355=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1286 1356
… …
1290=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1360=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1291 1361
1292Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1362Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1293for details. 1363for details.
1294 1364
1295=item B<searchable-scrollback:> I<keysym> 1365=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1296 1366
1297Sets the hotkey that starts the incremental scrollback buffer search 1367This resource is deprecated and will be removed. Use a B<keysym> resource
1298(default: C<M-s>). 1368instead, e.g.:
1299 1369
1370 URxvt.keysym.M-s: searchable-scrollback:start
1371
1300=item B<urlLauncher>: I<string> 1372=item B<url-launcher>: I<string>
1301 1373
1302Specifies the program to be started with a URL argument. Used by the 1374Specifies the program to be started with a URL argument. Used by the
1303C<selection-popup> and C<matcher> perl extensions. 1375C<selection-popup> and C<matcher> perl extensions.
1304 1376
1305=item B<transient-for>: I<windowid> 1377=item B<transient-for>: I<windowid>
… …
1349=head1 THE SELECTION: SELECTING AND PASTING TEXT 1421=head1 THE SELECTION: SELECTING AND PASTING TEXT
1350 1422
1351The behaviour of text selection and insertion/pasting mechanism is similar 1423The behaviour of text selection and insertion/pasting mechanism is similar
1352to I<xterm>(1). 1424to I<xterm>(1).
1353 1425
1354=over 4 1426=over
1355 1427
1356=item B<Selecting>: 1428=item B<Selecting>:
1357 1429
1358Left click at the beginning of the region, drag to the end of the region 1430Left click at the beginning of the region, drag to the end of the region
1359and release; Right click to extend the marked region; Left double-click 1431and release; Right click to extend the marked region; Left double-click
… …
1374B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1446B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1375 1447
1376Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1448Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1377inserted too. 1449inserted too.
1378 1450
1451rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1452<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1453binding causes the value of the internal selection to be copied to the
1454CLIPBOARD selection, while the second binding causes the value of the
1455CLIPBOARD selection to be inserted.
1456
1379=back 1457=back
1380 1458
1381=head1 CHANGING FONTS 1459=head1 CHANGING FONTS
1382 1460
1383Changing fonts (or font sizes, respectively) via the keypad is not yet 1461Changing fonts (or font sizes, respectively) via the keypad is not yet
… …
1400and character codes using the keyboard. It consists of 4 parts. The 1478and character codes using the keyboard. It consists of 4 parts. The
1401first part is available if rxvt-unicode has been compiled with 1479first part is available if rxvt-unicode has been compiled with
1402C<--enable-frills>, the rest is available when rxvt-unicode was compiled 1480C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1403with C<--enable-iso14755>. 1481with C<--enable-iso14755>.
1404 1482
1405=over 4 1483=over
1406 1484
1407=item * 5.1: Basic method 1485=item * 5.1: Basic method
1408 1486
1409This allows you to enter unicode characters using their hexcode. 1487This allows you to enter unicode characters using their hexcode.
1410 1488
… …
1471In addition to the default foreground and background colours, 1549In addition to the default foreground and background colours,
1472B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus 1550B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1473high-intensity (potentially bold/blink) versions of the same, and 72 (or 1551high-intensity (potentially bold/blink) versions of the same, and 72 (or
1474240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB 1552240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1475cube plus a 8 (24) colour greyscale ramp. 1553cube plus a 8 (24) colour greyscale ramp.
1554
1555B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
1556C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
1557number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
1558colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
155924-bit colour space. When indexing collisions happen, the nearest old colour in
1560the cube will be adapted to the new 24-bit RGB colour. That means one cannot
1561use many similar 24-bit colours. It's typically not a problem in common
1562scenarios.
1476 1563
1477Here is a list of the ANSI colours with their names. 1564Here is a list of the ANSI colours with their names.
1478 1565
1479=begin table 1566=begin table
1480 1567
… …
1507The following text gives values for the standard 88 colour mode (and 1594The following text gives values for the standard 88 colour mode (and
1508values for the 256 colour mode in parentheses). 1595values for the 256 colour mode in parentheses).
1509 1596
1510The RGB cube uses indices 16..79 (16..231) using the following formulas: 1597The RGB cube uses indices 16..79 (16..231) using the following formulas:
1511 1598
1512 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3 1599 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1513 index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15 1600 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1514 1601
1515The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10% 1602The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1516steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of 1603steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1517the RGB cube. 1604the RGB cube.
1518 1605
… …
1534White. 1621White.
1535 1622
1536=head2 ALPHA CHANNEL SUPPORT 1623=head2 ALPHA CHANNEL SUPPORT
1537 1624
1538If Xft support has been compiled in and as long as Xft/Xrender/X don't get 1625If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1539their act together, rxvt-unicode will do it's own alpha channel management: 1626their act together, rxvt-unicode will do its own alpha channel management:
1540 1627
1541You can prefix any colour with an opaqueness percentage enclosed in 1628You can prefix any colour with an opaqueness percentage enclosed in
1542brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage 1629brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1543(0-100) that specifies the opacity of the colour, where C<0> is completely 1630(0-100) that specifies the opacity of the colour, where C<0> is completely
1544transparent and C<100> is completely opaque. For example, C<[50]red> is a 1631transparent and C<100> is completely opaque. For example, C<[50]red> is a
… …
1581 1668
1582=head1 ENVIRONMENT 1669=head1 ENVIRONMENT
1583 1670
1584B<@@RXVT_NAME@@> sets and/or uses the following environment variables: 1671B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1585 1672
1586=over 4 1673=over
1587 1674
1588=item B<TERM> 1675=item B<TERM>
1589 1676
1590Normally set to C<rxvt-unicode>, unless overwritten at configure time, via 1677Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1591resources or on the command line. 1678resources or on the command line.
… …
1626 1713
1627=item B<SHELL> 1714=item B<SHELL>
1628 1715
1629The shell to be used for command execution, defaults to C</bin/sh>. 1716The shell to be used for command execution, defaults to C</bin/sh>.
1630 1717
1631=item B<RXVT_SOCKET> 1718=item B<RXVT_SOCKET> [I<sic>]
1632 1719
1633The unix domain socket path used by @@RXVT_NAME@@c(1) and 1720The unix domain socket path used by @@RXVT_NAME@@c(1) and
1634@@RXVT_NAME@@d(1). 1721@@RXVT_NAME@@d(1).
1635 1722
1636Default F<<< $HOME/.rxvt-unicode-I<< <nodename> >> >>>. 1723Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1724
1725=item B<URXVT_PERL_LIB>
1726
1727Additional F<:>-separated library search path for perl extensions. Will be
1728searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1729directory.
1730
1731=item B<URXVT_PERL_VERBOSITY>
1732
1733See L<@@RXVT_NAME@@perl>(3).
1637 1734
1638=item B<HOME> 1735=item B<HOME>
1639 1736
1640Used to locate the default directory for the unix domain socket for 1737Used to locate the default directory for the unix domain socket for
1641daemon communications and to locate various resource files (such as 1738daemon communications and to locate various resource files (such as
… …
1652 1749
1653=back 1750=back
1654 1751
1655=head1 FILES 1752=head1 FILES
1656 1753
1657=over 4 1754=over
1658 1755
1659=item B</usr/lib/X11/rgb.txt> 1756=item B</usr/lib/X11/rgb.txt>
1660 1757
1661Colour names. 1758Colour names.
1662 1759
1663=back 1760=back
1664 1761
1665=head1 SEE ALSO 1762=head1 SEE ALSO
1666 1763
1764@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1667@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1765@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1668 1766
1669=head1 CURRENT PROJECT COORDINATOR 1767=head1 CURRENT PROJECT COORDINATOR
1670 1768
1671=over 4 1769=over
1672 1770
1673=item Project Coordinator 1771=item Project Coordinator
1674 1772
1675Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1773Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1676 1774
1677L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1775L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1678 1776
1679=back 1777=back
1680 1778
1681=head1 AUTHORS 1779=head1 AUTHORS
1682 1780
1683=over 4 1781=over
1684 1782
1685=item John Bovey 1783=item John Bovey
1686 1784
1687University of Kent, 1992, wrote the original Xvt. 1785University of Kent, 1992, wrote the original Xvt.
1688 1786
1689=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1787=item Rob Nation <nation@rocket.sanders.lockheed.com>
1690 1788
1691very heavily modified Xvt and came up with Rxvt 1789very heavily modified Xvt and came up with Rxvt
1692 1790
1693=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1791=item Angelo Haritsis <ah@doc.ic.ac.uk>
1694 1792
1695wrote the Greek Keyboard Input (no longer in code) 1793wrote the Greek Keyboard Input (no longer in code)
1696 1794
1697=item mj olesen L<< <olesen@me.QueensU.CA> >> 1795=item mj olesen <olesen@me.QueensU.CA>
1698 1796
1699Wrote the menu system. 1797Wrote the menu system.
1700 1798
1701Project Coordinator (changes.txt 2.11 to 2.21) 1799Project Coordinator (changes.txt 2.11 to 2.21)
1702 1800
1703=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1801=item Oezguer Kesim <kesim@math.fu-berlin.de>
1704 1802
1705Project Coordinator (changes.txt 2.21a to 2.4.5) 1803Project Coordinator (changes.txt 2.21a to 2.4.5)
1706 1804
1707=item Geoff Wing L<< <gcw@pobox.com> >> 1805=item Geoff Wing <gcw@pobox.com>
1708 1806
1709Rewrote screen display and text selection routines. 1807Rewrote screen display and text selection routines.
1710 1808
1711Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1809Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1712 1810
1713=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1811=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1714 1812
1715Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1813Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1716extension, random hacks, numerous bugfixes and extensions. 1814extension, random hacks, numerous bugfixes and extensions.
1717 1815
1718Project Coordinator (Changes 1.0 -) 1816Project Coordinator (Changes 1.0 -)
1719 1817
1720=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1818=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1721 1819
1722pty/utmp code rewrite, image code improvements, many random hacks and bugfixes. 1820pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1723 1821
1724=back 1822=back
1725 1823

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines