[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.210 by sf-exg, Mon Dec 26 15:20:58 2011 UTC vs.
Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133		132
134	=item B<-fade> I<number>	133	=item B<-fade> I<number>
135		134
136	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
137	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
140	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
141		140
142	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
143	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
144		143
145	=item B<-tint> I<colour>
146
147	Tint the transparent background with the given colour;
148	resource I<tintColor>.
149
150	=item B<-sh> I<number>
151
152	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153	A value of 100 means no shading; resource I<shading>.
154
155	=item B<-blt> I<string>
156
157	Specify background blending type. If background pixmap is specified
158	at the same time as transparency - such pixmap will be blended over
159	the transparent background, using the method specified. Supported values are:
160	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163	alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165	=item B<-blr> I<HxV>
166
167	Apply Gaussian Blur with the specified radii to the transparent
168	background. If a single number is specified - both vertical and
169	horizontal radii are considered to be the same. Setting one of the
170	radii to 1 and another to a large number creates interesting effects
171	on some backgrounds. Maximum radius value is 128;
172	resource I<blurRadius>.
173
174	=item B<-icon> I<file>	144	=item B<-icon> I<file>
175		145
176	Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
177	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
178	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
179		149
180	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
181		151
182	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
183		153
184	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
185		155
186	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
187
188	=item B<-pixmap> I<file[;oplist]>
189
190	Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
191	optionally specify a list of operations to modify it. Note you may need to
192	add quotes to avoid special shell interpretation of the C<;> in the
193	command-line; for more details see resource B<backgroundPixmap>.
194		157
195	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
196		159
197	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
198		161
…		…
257		220
258	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
259		222
260	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
261		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
262	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
263		230
264	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265	B<utmpInhibit>.	232	B<utmpInhibit>.
266		233
…		…
344		311
345	=item B<-override-redirect>	312	=item B<-override-redirect>
346		313
347	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
348	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
349		321
350	=item B<-sbg>	322	=item B<-sbg>
351		323
352	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
353	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
687		659
688	B<False>: specify that everything is to be displayed, even	660	B<False>: specify that everything is to be displayed, even
689	if the refresh is too fast for the human eye to read anything (or the	661	if the refresh is too fast for the human eye to read anything (or the
690	monitor to display anything); option B<+ss>.	662	monitor to display anything); option B<+ss>.
691		663
692	=item B<transparent:> I<boolean>
693
694	Turn on/off pseudo-transparency by using the root pixmap as background.
695
696	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
697	future versions.
698
699	=item B<fading:> I<number>	664	=item B<fading:> I<number>
700		665
701	Fade the text by the given percentage when focus is lost; option B<-fade>.	666	Fade the text by the given percentage when focus is lost; option B<-fade>.
702		667
703	=item B<fadeColor:> I<colour>	668	=item B<fadeColor:> I<colour>
704		669
705	Fade to this colour, when fading is used (see B<fading:>). The default	670	Fade to this colour, when fading is used (see B<fading:>). The default
706	colour is black; option B<-fadecolor>.	671	colour is black; option B<-fadecolor>.
707		672
708	=item B<tintColor:> I<colour>
709
710	Tint the transparent background with the given colour. If the RENDER
711	extension is not available only black, red, green, yellow, blue,
712	magenta, cyan and white tints can be performed server-side. Note that
713	a black tint yields a completely black image while a white tint yields
714	the image unchanged; option B<-tint>.
715
716	=item B<shading:> I<number>
717
718	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
719	A value of 100 means no shading; option B<-sh>.
720
721	=item B<blendType:> I<string>
722
723	Specify background blending type; option B<-blt>.
724
725	=item B<blurRadius:> I<number>
726
727	Apply gaussian blur with the specified radius to the transparent
728	background; option B<-blr>.
729
730	=item B<iconFile:> I<file>	673	=item B<iconFile:> I<file>
731		674
732	Set the application icon pixmap; option B<-icon>.	675	Set the application icon pixmap; option B<-icon>.
733		676
734	=item B<scrollColor:> I<colour>	677	=item B<scrollColor:> I<colour>
…		…
742		685
743	=item B<borderColor:> I<colour>	686	=item B<borderColor:> I<colour>
744		687
745	The colour of the border around the text area and between the scrollbar	688	The colour of the border around the text area and between the scrollbar
746	and the text.	689	and the text.
747
748	=item B<backgroundPixmap:> I<file[;oplist]>
749
750	Use the specified image file for the background and also
751	optionally specify a colon separated list of operations to modify it.
752	Supported operations are:
753
754	=over 4
755
756	=item B<WxH+X+Y>
757
758	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
759	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
760	scale of 0 disables scaling. The maximum permitted scale is 1000.
761
762	=item B<op=tile>
763
764	enables tiling
765
766	=item B<op=keep-aspect>
767
768	maintain the image aspect ratio when scaling
769
770	=item B<op=root-align>
771
772	use the position of the terminal window relative to the root window as
773	the image offset, simulating a root window background
774
775	=back
776
777	The default scale and position setting is C<100x100+50+50>.
778	Alternatively, a predefined set of templates can be used to achieve
779	the most common setups:
780
781	=over 4
782
783	=item B<style=tiled>
784
785	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
786
787	=item B<style=aspect-stretched>
788
789	the image is scaled to fill the whole window maintaining the aspect
790	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
791
792	=item B<style=stretched>
793
794	the image is scaled to fill the whole window. Equivalent to 100x100
795
796	=item B<style=centered>
797
798	the image is centered with no scaling. Equivalent to 0x0+50+50
799
800	=item B<style=root-tiled>
801
802	the image is tiled with no scaling and using 'root' positioning.
803	Equivalent to 0x0:op=tile:op=root-align
804
805	=back
806
807	If multiple templates are specified the last one wins. Note that a
808	template overrides all the scale, position and operations settings.
809
810	If used in conjunction with B<-tr> option, the specified pixmap will be
811	blended over the transparent background using alpha-blending. If I<afterimage>
812	support has been compiled in it is possible to choose other blending
813	types with B<-blt "type"> option.
814
815	=item B<path:> I<path>
816
817	Specify the colon-delimited search path for finding background image files.
818		690
819	=item B<font:> I<fontlist>	691	=item B<font:> I<fontlist>
820		692
821	Select the fonts to be used. This is a comma separated list of font names	693	Select the fonts to be used. This is a comma separated list of font names
822	that are checked in order when trying to find glyphs for characters. The	694	that are checked in order when trying to find glyphs for characters. The
…		…
918	=item B<loginShell:> I<boolean>	790	=item B<loginShell:> I<boolean>
919		791
920	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	792	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
921	the shell; option B<-ls>. B<False>: start as a normal sub-shell	793	the shell; option B<-ls>. B<False>: start as a normal sub-shell
922	[default]; option B<+ls>.	794	[default]; option B<+ls>.
		795
		796	=item B<multiClickTime:> I<number>
		797
		798	Specify the maximum time in milliseconds between multi-click select
		799	events. The default is 500 milliseconds; option B<-mc>.
923		800
924	=item B<utmpInhibit:> I<boolean>	801	=item B<utmpInhibit:> I<boolean>
925		802
926	B<True>: inhibit writing record into the system log file B<utmp>;	803	B<True>: inhibit writing record into the system log file B<utmp>;
927	option B<-ut>. B<False>: write record into the system log file B<utmp>	804	option B<-ut>. B<False>: write record into the system log file B<utmp>
…		…
1179	Sets the working directory for the shell (or the command specified via	1056	Sets the working directory for the shell (or the command specified via
1180	B<-e>). The I<path> must be an absolute path and it must exist for	1057	B<-e>). The I<path> must be an absolute path and it must exist for
1181	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1058	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1182	directory will be used; option B<-cd>.	1059	directory will be used; option B<-cd>.
1183		1060
1184	=item B<keysym.>I<sym>: I<string>	1061	=item B<keysym.>I<sym>: I<action>
1185		1062
1186	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1063	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1187	intervening resource name B<keysym.> cannot be omitted.	1064	resource name B<keysym.> cannot be omitted.
1188		1065
1189	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1066	Using this resource, you can map key combinations such as
1190	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1067	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1191	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1068	string than would normally result from that combination, making the
1192	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1069	terminal scroll up or down the way you want it, or any other thing an
1193	B<2>, B<3>, B<4>, B<5>.	1070	extension might provide.
		1071
		1072	The key combination that triggers the action, I<sym>, has the following format:
		1073
		1074	(modifiers-)key
		1075
		1076	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1077	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1078	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1079	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1194		1080
1195	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1081	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1196	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1082	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1197	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1083	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1198	current application keymap mode state.	1084	current application keymap mode state.
1199		1085
1200	The spellings of I<key> can be obtained by using B<xev>(1) command or	1086	Due the the large number of modifier combinations, a key mapping will
1201	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1087	match if I<at least> the specified identifiers are being set, and no other
		1088	key mappings with those and more bits are being defined. That means that
		1089	defining a mapping for C<a> will automatically provide definitions for
		1090	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1091	themselves. See the C<builtin:> action, below, for a way to work around
		1092	this when this is a problem.
		1093
		1094	The spelling of I<key> depends on your implementation of X. An easy way to
		1095	find a key name is to use the B<xev>(1) command. You can find a list by
		1096	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1202	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1097	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1203	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1098	value (B<0x0000 - 0xFFFF>).
1204	performed in an exact manner; however, the closest match is assured.
1205		1099
1206	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1100	As with any resource value, the I<action> string may contain backslash
		1101	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1207	number), see RESOURCES in C<man 7 X> for further details.	1102	number), see RESOURCES in C<man 7 X> for further details.
1208		1103
1209	You can define a range of keysyms in one shot by	1104	An action starts with an action prefix that selects a certain type
1210	loading the C<keysym-list> perl extension and providing a I<string>	1105	of action, followed by a colon. An action string without colons is
1211	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1106	interpreted as a literal string to pass to the tty (as if it was
		1107	prefixed with C<string:>).
		1108
		1109	The following action prefixes are known - extensions can provide
		1110	additional prefixes:
		1111
		1112	=over 4
		1113
		1114	=item string:STRING
		1115
		1116	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1117	then the remaining C<STRING> will be passed to the program running in the
		1118	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1119	string C<echo rm -rf /> followed by a newline:
		1120
		1121	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1122
		1123	This could in theory be used to completely redefine your keymap.
		1124
		1125	In addition, for actions of this type, you can define a range of
		1126	keysyms in one shot by loading the C<keysym-list> perl extension and
		1127	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1212	should be a character not used by the strings.	1128	the delimiter `/' should be a character not used by the strings.
1213		1129
1214	Its usage can be demonstrated by an example:	1130	Its usage can be demonstrated by an example:
1215		1131
1216	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>	1132	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1217		1133
1218	The above line is equivalent to the following three lines:	1134	The above line is equivalent to the following three lines:
1219		1135
1220	URxvt.keysym.Meta-Control-0x61: \033<a>	1136	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1221	URxvt.keysym.Meta-Control-0x62: \033<b>	1137	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1222	URxvt.keysym.Meta-Control-0x63: \033<c>	1138	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1223		1139
		1140	=item command:STRING
		1141
1224	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1142	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1225	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1143	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1144	the opposite of C<string:> - instead of sending it to the program running
		1145	in the terminal, it will be treated as if it were program output). This is
		1146	most useful to feed command sequences into @@RXVT_NAME@@.
		1147
1226	example the following means "change the current locale to C<zh_CN.GBK>	1148	For example the following means "change the current locale to C<zh_CN.GBK>
1227	when Control-Meta-c is being pressed":	1149	when Control-Meta-c is being pressed":
1228		1150
1229	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1151	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1230		1152
1231	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1153	The following example will map Control-Meta-1 and Control-Meta-2 to
1232	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1154	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1233	manpage. For example, the F<selection> extension (activated via	1155	font-switching at runtime:
1234	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1235		1156
1236	URxvt.keysym.M-C-c: perl:selection:rot13	1157	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1158	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1237		1159
1238	Due the the large number of modifier combinations, a defined key mapping	1160	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1239	will match if I<at least> the specified identifiers are being set, and	1161	info):
1240	no other key mappings with those and more bits are being defined. That
1241	means that defining a key map for C<a> will automatically provide
1242	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1243	mappings themselves.
1244		1162
1245	Unfortunately, this will override built-in key mappings. For example	1163	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1164	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1165
		1166	=item builtin:
		1167
		1168	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1169	key binding existed for the key combination. The obvious use is to undo
		1170	the effect of existing bindings. The not so obvious use is to reinstate
		1171	bindings when another binding overrides too many modifiers.
		1172
1246	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1173	For example if you overwrite the C<Insert> key you will disable
1247	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1174	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1248	user-defined keymap using the C<builtin:> replacement:	1175	"holes" into the user-defined keymap using the C<builtin:> replacement:
1249		1176
1250	URxvt.keysym.Insert: <my insert key sequence>	1177	URxvt.keysym.Insert: <my insert key sequence>
1251	URxvt.keysym.S-Insert: builtin:	1178	URxvt.keysym.S-Insert: builtin:
1252		1179
1253	The first line defines a mapping for C<Insert> and I<any> combination	1180	The first line defines a mapping for C<Insert> and I<any> combination
1254	of modifiers. The second line re-establishes the default mapping for	1181	of modifiers. The second line re-establishes the default mapping for
1255	C<Shift-Insert>.	1182	C<Shift-Insert>.
1256		1183
1257	The following example will map Control-Meta-1 and Control-Meta-2 to	1184	=item builtin-string:
1258	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1259	font-switching at runtime:
1260		1185
1261	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1186	This action is mainly useful to restore string mappings for keys that
1262	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1187	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1188	difficult to explain - basically, this action will send the string to the
		1189	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1190	action for it.
1263		1191
1264	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1192	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1265	info):	1193	selection when you press C<Shift-Insert>. With the following bindings, it
		1194	would instead emit the (undocumented, but what applications running in the
		1195	terminal might expect) sequence C<ESC [ 2 $> instead:
1266		1196
1267	URxvt.keysym.M-C-3: command:\033[8;25;80t	1197	URxvt.keysym.S-Insert: builtin-string:
1268	URxvt.keysym.M-C-4: command:\033[8;48;110t	1198	URxvt.keysym.C-S-Insert: builtin:
		1199
		1200	The first line disables the paste functionality for that key
		1201	combination, and the second reinstates the default behaviour for
		1202	C<Control-Shift-Insert>, which would otherwise be overridden.
		1203
		1204	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1205	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1206	this:
		1207
		1208	URxvt.keysym.C-M-c: builtin-string:
		1209	URxvt.keysym.C-M-v: builtin-string:
		1210
		1211	=item EXTENSION:STRING
		1212
		1213	An action of this form invokes the action B<STRING>, if any, provided
		1214	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1215	be loaded automatically if necessary.
		1216
		1217	Not all extensions define actions, but popular extensions that do
		1218	include the I<selection> and I<matcher> extensions (documented in their
		1219	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1220	respectively).
		1221
		1222	From the silly examples department, this will rot13-"encrypt"
		1223	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1224	keyboards:
		1225
		1226	URxvt.keysym.M-C-c: selection:rot13
		1227
		1228	=item perl:STRING DEPRECATED
		1229
		1230	This is a deprecated way of invoking commands provided by perl
		1231	extensions. It is still supported, but should not be used anymore.
		1232
		1233	=back
1269		1234
1270	=item B<perl-ext-common>: I<string>	1235	=item B<perl-ext-common>: I<string>
1271		1236
1272	=item B<perl-ext>: I<string>	1237	=item B<perl-ext>: I<string>
1273		1238
…		…
1275	use in this terminal instance; option B<-pe>.	1240	use in this terminal instance; option B<-pe>.
1276		1241
1277	Extension names can be prefixed with a C<-> sign to prohibit using	1242	Extension names can be prefixed with a C<-> sign to prohibit using
1278	them. This can be useful to selectively disable some extensions loaded	1243	them. This can be useful to selectively disable some extensions loaded
1279	by default, or specified via the C<perl-ext-common> resource. For	1244	by default, or specified via the C<perl-ext-common> resource. For
1280	example, C<default,-selection> will use all the default extension except	1245	example, C<default,-selection> will use all the default extensions except
1281	C<selection>.	1246	C<selection>.
1282		1247
1283	Extension names can also be followed by an argument in angle brackets	1248	The default set includes the C<selection>, C<option-popup>,
1284	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1249	C<selection-popup>, C<readline> and C<searchable-scrollback>
1285	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1250	extensions, and extensions which are mentioned in B<keysym> resources.
1286	multiple times with different arguments will pass multiple arguments to	1251
1287	the extension.	1252	Any extension such that a corresponding resource is given on the
		1253	command line is automatically appended to B<perl-ext>.
1288		1254
1289	Each extension is looked up in the library directories, loaded if	1255	Each extension is looked up in the library directories, loaded if
1290	necessary, and bound to the current terminal instance.	1256	necessary, and bound to the current terminal instance. When the library
		1257	search path contains multiple extension files of the same name, then the
		1258	first one found will be used.
1291		1259
1292	If both of these resources are the empty string, then the perl	1260	If both of these resources are the empty string, then the perl interpreter
1293	interpreter will not be initialized. The idea behind two options is that	1261	will not be initialized. The rationale for having two options is that
1294	B<perl-ext-common> will be used for extensions that should be available to	1262	B<perl-ext-common> will be used for extensions that should be available to
1295	all instances, while B<perl-ext> is used for specific instances.	1263	all instances, while B<perl-ext> is used for specific instances.
1296		1264
1297	=item B<perl-eval>: I<string>	1265	=item B<perl-eval>: I<string>
1298		1266
…		…
1300	the @@RXVT_NAME@@perl(3) manpage.	1268	the @@RXVT_NAME@@perl(3) manpage.
1301		1269
1302	=item B<perl-lib>: I<path>	1270	=item B<perl-lib>: I<path>
1303		1271
1304	Colon-separated list of additional directories that hold extension	1272	Colon-separated list of additional directories that hold extension
1305	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first	1273	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1306	look in these directories, then in $HOME/.urxvt/ext and lastly in	1274	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1307	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1275	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1308		1276
1309	See the @@RXVT_NAME@@perl(3) manpage.	1277	See the @@RXVT_NAME@@perl(3) manpage.
1310		1278
1311	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1279	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1312		1280
…		…
1316	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1284	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1317		1285
1318	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1286	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1319	for details.	1287	for details.
1320		1288
1321	=item B<searchable-scrollback:> I<keysym>	1289	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1322		1290
1323	Sets the hotkey that starts the incremental scrollback buffer search	1291	This resource is deprecated and will be removed. Use a B<keysym> resource
1324	(default: C<M-s>).	1292	instead, e.g.:
1325		1293
		1294	URxvt.keysym.M-s: searchable-scrollback:start
		1295
1326	=item B<urlLauncher>: I<string>	1296	=item B<url-launcher>: I<string>
1327		1297
1328	Specifies the program to be started with a URL argument. Used by the	1298	Specifies the program to be started with a URL argument. Used by the
1329	C<selection-popup> and C<matcher> perl extensions.	1299	C<selection-popup> and C<matcher> perl extensions.
1330		1300
1331	=item B<transient-for>: I<windowid>	1301	=item B<transient-for>: I<windowid>
…		…
1342	Turn on/off ISO 14755 (default enabled).	1312	Turn on/off ISO 14755 (default enabled).
1343		1313
1344	=item B<iso14755_52:> I<boolean>	1314	=item B<iso14755_52:> I<boolean>
1345		1315
1346	Turn on/off ISO 14755 5.2 mode (default enabled).	1316	Turn on/off ISO 14755 5.2 mode (default enabled).
		1317
		1318	=back
		1319
		1320	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1321
		1322	=over 4
		1323
		1324	=item B<-pixmap> I<file[;oplist]>
		1325
		1326	=item B<backgroundPixmap:> I<file[;oplist]>
		1327
		1328	Compile I<pixbuf>: Use the specified image file as the window's
		1329	background and also optionally specify a colon separated list of
		1330	operations to modify it. Note that you may need to quote the C<;>
		1331	character when using the command line option, as C<;> is usually a
		1332	metacharacter in shells. Supported operations are:
		1333
		1334	=over 4
		1335
		1336	=item B<WxH+X+Y>
		1337
		1338	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1339	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1340	scale of 0 disables scaling.
		1341
		1342	=item B<op=tile>
		1343
		1344	enables tiling
		1345
		1346	=item B<op=keep-aspect>
		1347
		1348	maintain the image aspect ratio when scaling
		1349
		1350	=item B<op=root-align>
		1351
		1352	use the position of the terminal window relative to the root window as
		1353	the image offset, simulating a root window background
		1354
		1355	=back
		1356
		1357	The default scale and position setting is C<100x100+50+50>.
		1358	Alternatively, a predefined set of templates can be used to achieve
		1359	the most common setups:
		1360
		1361	=over 4
		1362
		1363	=item B<style=tiled>
		1364
		1365	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1366
		1367	=item B<style=aspect-stretched>
		1368
		1369	the image is scaled to fill the whole window maintaining the aspect
		1370	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1371
		1372	=item B<style=stretched>
		1373
		1374	the image is scaled to fill the whole window. Equivalent to 100x100
		1375
		1376	=item B<style=centered>
		1377
		1378	the image is centered with no scaling. Equivalent to 0x0+50+50
		1379
		1380	=item B<style=root-tiled>
		1381
		1382	the image is tiled with no scaling and using 'root' positioning.
		1383	Equivalent to 0x0:op=tile:op=root-align
		1384
		1385	=back
		1386
		1387	If multiple templates are specified the last one wins. Note that a
		1388	template overrides all the scale, position and operations settings.
		1389
		1390	If used in conjunction with pseudo-transparency, the specified pixmap
		1391	will be blended over the transparent background using alpha-blending.
		1392
		1393	=item B<-tr>\|B<+tr>
		1394
		1395	=item B<transparent:> I<boolean>
		1396
		1397	Turn on/off pseudo-transparency by using the root pixmap as background.
		1398
		1399	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1400	will be removed in future versions.
		1401
		1402	=item B<-tint> I<colour>
		1403
		1404	=item B<tintColor:> I<colour>
		1405
		1406	Tint the transparent background with the given colour. Note that a
		1407	black tint yields a completely black image while a white tint yields
		1408	the image unchanged.
		1409
		1410	=item B<-sh> I<number>
		1411
		1412	=item B<shading:> I<number>
		1413
		1414	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1415	A value of 100 means no shading.
		1416
		1417	=item B<-blr> I<HxV>
		1418
		1419	=item B<blurRadius:> I<HxV>
		1420
		1421	Apply gaussian blur with the specified radius to the transparent
		1422	background. If a single number is specified, the vertical and
		1423	horizontal radii are considered to be the same. Setting one of the
		1424	radii to 1 and the other to a large number creates interesting effects
		1425	on some backgrounds. The maximum radius value is 128. An horizontal or
		1426	vertical radius of 0 disables blurring.
		1427
		1428	=item B<path:> I<path>
		1429
		1430	Specify the colon-delimited search path for finding background image files.
1347		1431
1348	=back	1432	=back
1349		1433
1350	=head1 THE SCROLLBAR	1434	=head1 THE SCROLLBAR
1351		1435
…		…
1399	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1483	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1400	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1484	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1401		1485
1402	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1486	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1403	inserted too.	1487	inserted too.
		1488
		1489	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1490	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1491	binding causes the value of the internal selection to be copied to the
		1492	CLIPBOARD selection, while the second binding causes the value of the
		1493	CLIPBOARD selection to be inserted.
1404		1494
1405	=back	1495	=back
1406		1496
1407	=head1 CHANGING FONTS	1497	=head1 CHANGING FONTS
1408		1498
…		…
1533	The following text gives values for the standard 88 colour mode (and	1623	The following text gives values for the standard 88 colour mode (and
1534	values for the 256 colour mode in parentheses).	1624	values for the 256 colour mode in parentheses).
1535		1625
1536	The RGB cube uses indices 16..79 (16..231) using the following formulas:	1626	The RGB cube uses indices 16..79 (16..231) using the following formulas:
1537		1627
1538	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3	1628	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1539	index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15	1629	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1540		1630
1541	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%	1631	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1542	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of	1632	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1543	the RGB cube.	1633	the RGB cube.
1544		1634
…		…
1652		1742
1653	=item B<SHELL>	1743	=item B<SHELL>
1654		1744
1655	The shell to be used for command execution, defaults to C</bin/sh>.	1745	The shell to be used for command execution, defaults to C</bin/sh>.
1656		1746
1657	=item B<RXVT_SOCKET>	1747	=item B<RXVT_SOCKET> [I<sic>]
1658		1748
1659	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1749	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1660	@@RXVT_NAME@@d(1).	1750	@@RXVT_NAME@@d(1).
1661		1751
1662	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.	1752	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1753
		1754	=item B<URXVT_PERL_LIB>
		1755
		1756	Additional F<:>-separated library search path for perl extensions. Will be
		1757	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1758	directory.
		1759
		1760	=item B<URXVT_PERL_VERBOSITY>
		1761
		1762	See L<@@RXVT_NAME@@perl>(3).
1663		1763
1664	=item B<HOME>	1764	=item B<HOME>
1665		1765
1666	Used to locate the default directory for the unix domain socket for	1766	Used to locate the default directory for the unix domain socket for
1667	daemon communications and to locate various resource files (such as	1767	daemon communications and to locate various resource files (such as
…		…
1688		1788
1689	=back	1789	=back
1690		1790
1691	=head1 SEE ALSO	1791	=head1 SEE ALSO
1692		1792
		1793	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1693	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1794	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1694		1795
1695	=head1 CURRENT PROJECT COORDINATOR	1796	=head1 CURRENT PROJECT COORDINATOR
1696		1797
1697	=over 4	1798	=over 4
1698		1799
1699	=item Project Coordinator	1800	=item Project Coordinator
1700		1801
1701	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1802	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1702		1803
1703	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1804	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1704		1805
1705	=back	1806	=back
1706		1807
…		…
1710		1811
1711	=item John Bovey	1812	=item John Bovey
1712		1813
1713	University of Kent, 1992, wrote the original Xvt.	1814	University of Kent, 1992, wrote the original Xvt.
1714		1815
1715	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1816	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1716		1817
1717	very heavily modified Xvt and came up with Rxvt	1818	very heavily modified Xvt and came up with Rxvt
1718		1819
1719	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1820	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1720		1821
1721	wrote the Greek Keyboard Input (no longer in code)	1822	wrote the Greek Keyboard Input (no longer in code)
1722		1823
1723	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1824	=item mj olesen <olesen@me.QueensU.CA>
1724		1825
1725	Wrote the menu system.	1826	Wrote the menu system.
1726		1827
1727	Project Coordinator (changes.txt 2.11 to 2.21)	1828	Project Coordinator (changes.txt 2.11 to 2.21)
1728		1829
1729	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1830	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1730		1831
1731	Project Coordinator (changes.txt 2.21a to 2.4.5)	1832	Project Coordinator (changes.txt 2.21a to 2.4.5)
1732		1833
1733	=item Geoff Wing L<< <gcw@pobox.com> >>	1834	=item Geoff Wing <gcw@pobox.com>
1734		1835
1735	Rewrote screen display and text selection routines.	1836	Rewrote screen display and text selection routines.
1736		1837
1737	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1838	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1738		1839
1739	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1840	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1740		1841
1741	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1842	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1742	extension, random hacks, numerous bugfixes and extensions.	1843	extension, random hacks, numerous bugfixes and extensions.
1743		1844
1744	Project Coordinator (Changes 1.0 -)	1845	Project Coordinator (Changes 1.0 -)
1745		1846
1746	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1847	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1747		1848
1748	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.	1849	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1749		1850
1750	=back	1851	=back
1751		1852

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.210 by sf-exg, Mon Dec 26 15:20:58 2011 UTC vs. Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.210 by sf-exg, Mon Dec 26 15:20:58 2011 UTC vs.
Revision 1.242 by sf-exg, Fri Dec 26 21:49:11 2014 UTC