ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.212 by sf-exg, Sun Jan 1 14:31:28 2012 UTC vs.
Revision 1.258 by root, Mon Nov 22 17:01:36 2021 UTC

… …
84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1 84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85Orange'. 85Orange'.
86 86
87The following options are available: 87The following options are available:
88 88
89=over 4 89=over
90 90
91=item B<-help>, B<--help> 91=item B<-help>, B<--help>
92 92
93Print out a message describing available options. 93Print out a message describing available options.
94 94
… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
114possible visual ids) instead of the default, and also allocate a private
115colormap. All visual types except for DirectColor are supported.
116
111=item B<-geometry> I<geom> 117=item B<-geometry> I<geom>
112 118
113Window geometry (B<-g> still respected); resource B<geometry>. 119Window geometry (B<-g> still respected); resource B<geometry>.
114 120
115=item B<-rv>|B<+rv> 121=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 127Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 128
123=item B<-ss>|B<+ss> 129=item B<-ss>|B<+ss>
124 130
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 131Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133 132
134=item B<-fade> I<number> 133=item B<-fade> I<number>
135 134
136Fade the text by the given percentage when focus is lost. Small values 135Fade the text by the given percentage when focus is lost. Small values
137fade a little only, 100 completely replaces all colours by the fade 136fade a little only, 100 completely replaces all colours by the fade
… …
140=item B<-fadecolor> I<colour> 139=item B<-fadecolor> I<colour>
141 140
142Fade to this colour when fading is used (see B<-fade>). The default colour 141Fade to this colour when fading is used (see B<-fade>). The default colour
143is opaque black. resource B<fadeColor>. 142is opaque black. resource B<fadeColor>.
144 143
145=item B<-tint> I<colour>
146
147Tint the transparent background with the given colour;
148resource I<tintColor>.
149
150=item B<-sh> I<number>
151
152Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153A value of 100 means no shading; resource I<shading>.
154
155=item B<-blt> I<string>
156
157Specify background blending type. If background pixmap is specified
158at the same time as transparency - such pixmap will be blended over
159the transparent background, using the method specified. Supported values are:
160B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165=item B<-blr> I<HxV>
166
167Apply Gaussian Blur with the specified radii to the transparent
168background. If a single number is specified, the vertical and
169horizontal radii are considered to be the same. Setting one of the
170radii to 1 and the other to a large number creates interesting effects
171on some backgrounds. The maximum radius value is 128. An horizontal or
172vertical radius of 0 disables blurring;
173resource I<blurRadius>.
174
175=item B<-icon> I<file> 144=item B<-icon> I<file>
176 145
177Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This 146Compile I<pixbuf>: Use the specified image as application icon. This
178is used by many window managers, taskbars and pagers to represent the 147is used by many window managers, taskbars and pagers to represent the
179application window; resource I<iconFile>. 148application window; resource I<iconFile>.
180 149
181=item B<-bg> I<colour> 150=item B<-bg> I<colour>
182 151
183Window background colour; resource B<background>. 152Window background colour; resource B<background>.
184 153
185=item B<-fg> I<colour> 154=item B<-fg> I<colour>
186 155
187Window foreground colour; resource B<foreground>. 156Window foreground colour; resource B<foreground>.
188
189=item B<-pixmap> I<file[;oplist]>
190
191Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
192optionally specify a list of operations to modify it. Note you may need to
193add quotes to avoid special shell interpretation of the C<;> in the
194command-line; for more details see resource B<backgroundPixmap>.
195 157
196=item B<-cr> I<colour> 158=item B<-cr> I<colour>
197 159
198The cursor colour; resource B<cursorColor>. 160The cursor colour; resource B<cursorColor>.
199 161
… …
258 220
259=item B<-ls>|B<+ls> 221=item B<-ls>|B<+ls>
260 222
261Start as a login-shell/sub-shell; resource B<loginShell>. 223Start as a login-shell/sub-shell; resource B<loginShell>.
262 224
225=item B<-mc> I<milliseconds>
226
227Specify the maximum time between multi-click selections.
228
263=item B<-ut>|B<+ut> 229=item B<-ut>|B<+ut>
264 230
265Compile I<utmp>: Inhibit/enable writing a utmp entry; resource 231Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
266B<utmpInhibit>. 232B<utmpInhibit>.
267 233
… …
345 311
346=item B<-override-redirect> 312=item B<-override-redirect>
347 313
348Compile I<frills>: Sets override-redirect on the window; resource 314Compile I<frills>: Sets override-redirect on the window; resource
349B<override-redirect>. 315B<override-redirect>.
316
317=item B<-dockapp>
318
319Sets the initial state of the window to WithdrawnState, which makes
320window managers that support this extension treat it as a dockapp.
350 321
351=item B<-sbg> 322=item B<-sbg>
352 323
353Compile I<frills>: Disable the usage of the built-in block graphics/line 324Compile I<frills>: Disable the usage of the built-in block graphics/line
354drawing characters and just rely on what the specified fonts provide. Use 325drawing characters and just rely on what the specified fonts provide. Use
… …
409=item B<-pt> I<style> 380=item B<-pt> I<style>
410 381
411Compile I<XIM>: input style for input method; B<OverTheSpot>, 382Compile I<XIM>: input style for input method; B<OverTheSpot>,
412B<OffTheSpot>, B<Root>; resource B<preeditType>. 383B<OffTheSpot>, B<Root>; resource B<preeditType>.
413 384
385If the perl extension C<xim-onthespot> is used (which is the default),
386then additionally the C<OnTheSpot> preedit type is available.
387
414=item B<-im> I<text> 388=item B<-im> I<text>
415 389
416Compile I<XIM>: input method name. resource B<inputMethod>. 390Compile I<XIM>: input method name. resource B<inputMethod>.
417 391
418=item B<-imlocale> I<string> 392=item B<-imlocale> I<string>
… …
432Change the meaning of triple-click selection with the left mouse 406Change the meaning of triple-click selection with the left mouse
433button. Only effective when the original (non-perl) selection code is 407button. Only effective when the original (non-perl) selection code is
434in-use. Instead of selecting a full line it will extend the selection to 408in-use. Instead of selecting a full line it will extend the selection to
435the end of the logical line only. resource B<tripleclickwords>. 409the end of the logical line only. resource B<tripleclickwords>.
436 410
411=item B<-dpb>|B<+dpb>
412
413Compile frills: Disable (or enable) emitting bracketed paste mode
414sequences (default enabled). Bracketed paste mode allows programs
415to detect when something is pasted. Since more and more programs
416abuse this, these sequences can be disabled. The command sequences to
417enable and query paste mode will still work, but the actual bracket
418sequences will no longer be emitted. You can also toggle this from the
419ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
420
437=item B<-insecure> 421=item B<-insecure>
438 422
439Enable "insecure" mode, which currently enables most of the escape 423Enable "insecure" mode, which currently enables most of the escape
440sequences that echo strings. See the resource B<insecure> for more 424sequences that echo strings. See the resource B<insecure> for more
441info. 425info.
… …
453 437
454=item B<-ssr>|B<+ssr> 438=item B<-ssr>|B<+ssr>
455 439
456Turn on/off secondary screen scroll (default enabled); resource 440Turn on/off secondary screen scroll (default enabled); resource
457B<secondaryScroll>. 441B<secondaryScroll>.
442
443=item B<-rm> I<mode>
444
445Compile I<frills>: Sets long line rewrapping behaviour on window resizes
446to one of B<auto> (the default), B<always> or B<never>. The latter two
447modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
448is non-empty, and wings lines (acts like B<never>) otherwise; resource
449B<rewrapMode>.
458 450
459=item B<-hold>|B<+hold> 451=item B<-hold>|B<+hold>
460 452
461Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ 453Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
462will not immediately destroy its window when the program executed within 454will not immediately destroy its window when the program executed within
… …
540 close $pty; 532 close $pty;
541 533
542 # now communicate with rxvt 534 # now communicate with rxvt
543 my $slave = $pty->slave; 535 my $slave = $pty->slave;
544 while (<$slave>) { print $slave "got <$_>\n" } 536 while (<$slave>) { print $slave "got <$_>\n" }
537
538Note that, despite what the name might imply, the file descriptor does not
539need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
540domain or tcp socket). While tty operations cannot be done in this case,
541B<@@RXVT_NAME@@> can still be remote controlled with it:
542
543 use Socket;
544 use Fcntl;
545
546 socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
547 fcntl $slave, Fcntl::F_SETFD, 0;
548 system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
549 close $slave;
550
551 syswrite $URXVT, "Type a secret password: ";
552 my $secret = do { local $/ = "\r"; <$URXVT> };
553 print "Not so secret anymore: $secret\n";
545 554
546=item B<-pe> I<string> 555=item B<-pe> I<string>
547 556
548Comma-separated list of perl extension scripts to use (or not to use) in 557Comma-separated list of perl extension scripts to use (or not to use) in
549this terminal instance. See resource B<perl-ext> for details. 558this terminal instance. See resource B<perl-ext> for details.
… …
577be used. Command-line arguments can be used to override resource 586be used. Command-line arguments can be used to override resource
578settings. The following resources are supported (you might want to 587settings. The following resources are supported (you might want to
579check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl 588check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
580extensions not documented here): 589extensions not documented here):
581 590
582=over 4 591=over
583 592
584=item B<depth:> I<bitdepth> 593=item B<depth:> I<bitdepth>
585 594
586Compile I<xft>: Attempt to find a visual with the given bit depth; 595Compile I<xft>: Attempt to find a visual with the given bit depth;
587option B<-depth>. 596option B<-depth>.
… …
688 697
689B<False>: specify that everything is to be displayed, even 698B<False>: specify that everything is to be displayed, even
690if the refresh is too fast for the human eye to read anything (or the 699if the refresh is too fast for the human eye to read anything (or the
691monitor to display anything); option B<+ss>. 700monitor to display anything); option B<+ss>.
692 701
693=item B<transparent:> I<boolean>
694
695Turn on/off pseudo-transparency by using the root pixmap as background.
696
697B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
698future versions.
699
700=item B<fading:> I<number> 702=item B<fading:> I<number>
701 703
702Fade the text by the given percentage when focus is lost; option B<-fade>. 704Fade the text by the given percentage when focus is lost; option B<-fade>.
703 705
704=item B<fadeColor:> I<colour> 706=item B<fadeColor:> I<colour>
705 707
706Fade to this colour, when fading is used (see B<fading:>). The default 708Fade to this colour, when fading is used (see B<fading:>). The default
707colour is black; option B<-fadecolor>. 709colour is black; option B<-fadecolor>.
708 710
709=item B<tintColor:> I<colour>
710
711Tint the transparent background with the given colour. If the RENDER
712extension is not available only black, red, green, yellow, blue,
713magenta, cyan and white tints can be performed server-side. Note that
714a black tint yields a completely black image while a white tint yields
715the image unchanged; option B<-tint>.
716
717=item B<shading:> I<number>
718
719Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
720A value of 100 means no shading; option B<-sh>.
721
722=item B<blendType:> I<string>
723
724Specify background blending type; option B<-blt>.
725
726=item B<blurRadius:> I<number>
727
728Apply gaussian blur with the specified radius to the transparent
729background; option B<-blr>.
730
731=item B<iconFile:> I<file> 711=item B<iconFile:> I<file>
732 712
733Set the application icon pixmap; option B<-icon>. 713Set the application icon pixmap; option B<-icon>.
734 714
735=item B<scrollColor:> I<colour> 715=item B<scrollColor:> I<colour>
… …
743 723
744=item B<borderColor:> I<colour> 724=item B<borderColor:> I<colour>
745 725
746The colour of the border around the text area and between the scrollbar 726The colour of the border around the text area and between the scrollbar
747and the text. 727and the text.
748
749=item B<backgroundPixmap:> I<file[;oplist]>
750
751Use the specified image file for the background and also
752optionally specify a colon separated list of operations to modify it.
753Supported operations are:
754
755=over 4
756
757=item B<WxH+X+Y>
758
759sets scale and position. B<"W" / "H"> specify the horizontal/vertical
760scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
761scale of 0 disables scaling. The maximum permitted scale is 1000.
762
763=item B<op=tile>
764
765enables tiling
766
767=item B<op=keep-aspect>
768
769maintain the image aspect ratio when scaling
770
771=item B<op=root-align>
772
773use the position of the terminal window relative to the root window as
774the image offset, simulating a root window background
775
776=back
777
778The default scale and position setting is C<100x100+50+50>.
779Alternatively, a predefined set of templates can be used to achieve
780the most common setups:
781
782=over 4
783
784=item B<style=tiled>
785
786the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
787
788=item B<style=aspect-stretched>
789
790the image is scaled to fill the whole window maintaining the aspect
791ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
792
793=item B<style=stretched>
794
795the image is scaled to fill the whole window. Equivalent to 100x100
796
797=item B<style=centered>
798
799the image is centered with no scaling. Equivalent to 0x0+50+50
800
801=item B<style=root-tiled>
802
803the image is tiled with no scaling and using 'root' positioning.
804Equivalent to 0x0:op=tile:op=root-align
805
806=back
807
808If multiple templates are specified the last one wins. Note that a
809template overrides all the scale, position and operations settings.
810
811If used in conjunction with B<-tr> option, the specified pixmap will be
812blended over the transparent background using alpha-blending. If I<afterimage>
813support has been compiled in it is possible to choose other blending
814types with B<-blt "type"> option.
815
816=item B<path:> I<path>
817
818Specify the colon-delimited search path for finding background image files.
819 728
820=item B<font:> I<fontlist> 729=item B<font:> I<fontlist>
821 730
822Select the fonts to be used. This is a comma separated list of font names 731Select the fonts to be used. This is a comma separated list of font names
823that are checked in order when trying to find glyphs for characters. The 732that are checked in order when trying to find glyphs for characters. The
… …
920 829
921B<True>: start as a login shell by prepending a `-' to B<argv[0]> of 830B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
922the shell; option B<-ls>. B<False>: start as a normal sub-shell 831the shell; option B<-ls>. B<False>: start as a normal sub-shell
923[default]; option B<+ls>. 832[default]; option B<+ls>.
924 833
834=item B<multiClickTime:> I<number>
835
836Specify the maximum time in milliseconds between multi-click select
837events. The default is 500 milliseconds; option B<-mc>.
838
925=item B<utmpInhibit:> I<boolean> 839=item B<utmpInhibit:> I<boolean>
926 840
927B<True>: inhibit writing record into the system log file B<utmp>; 841B<True>: inhibit writing record into the system log file B<utmp>;
928option B<-ut>. B<False>: write record into the system log file B<utmp> 842option B<-ut>. B<False>: write record into the system log file B<utmp>
929[default]; option B<+ut>. 843[default]; option B<+ut>.
… …
992are not passed onto the shell; option B<-sk>. B<False>: do not scroll to 906are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
993bottom when a non-special key is pressed; option B<+sk>. 907bottom when a non-special key is pressed; option B<+sk>.
994 908
995=item B<saveLines:> I<number> 909=item B<saveLines:> I<number>
996 910
997Save I<number> lines in the scrollback buffer [default 64]. This 911Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
998resource is limited on most machines to 65535; option B<-sl>.
999 912
1000=item B<internalBorder:> I<number> 913=item B<internalBorder:> I<number>
1001 914
1002Internal border of I<number> pixels. This resource is limited to 100; 915Internal border of I<number> pixels. This resource is limited to 100;
1003option B<-b>. 916option B<-b>.
… …
1066 979
1067=item B<pointerColor2:> I<colour> 980=item B<pointerColor2:> I<colour>
1068 981
1069Mouse pointer background colour. 982Mouse pointer background colour.
1070 983
984=item B<pointerShape:> I<string>
985
986Compile I<frills>: Specifies the name of the mouse pointer shape
987[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
988file for possible values (omit the C<XC_> prefix).
989
1071=item B<pointerBlankDelay:> I<number> 990=item B<pointerBlankDelay:> I<number>
1072 991
1073Specifies number of seconds before blanking the pointer [default 2]. Use a 992Specifies number of seconds before blanking the pointer [default 2]. Use a
1074large number (e.g. C<987654321>) to effectively disable the timeout. 993large number (e.g. C<987654321>) to effectively disable the timeout.
1075 994
… …
1101 1020
1102B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> 1021B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
1103 1022
1104=item B<preeditType:> I<style> 1023=item B<preeditType:> I<style>
1105 1024
1106B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. 1025B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1107 1026
1108=item B<inputMethod:> I<name> 1027=item B<inputMethod:> I<name>
1109 1028
1110I<name> of inputMethod to use; option B<-im>. 1029I<name> of inputMethod to use; option B<-im>.
1111 1030
… …
1129 1048
1130Change the meaning of triple-click selection with the left mouse 1049Change the meaning of triple-click selection with the left mouse
1131button. Instead of selecting a full line it will extend the selection to 1050button. Instead of selecting a full line it will extend the selection to
1132the end of the logical line only; option B<-tcw>. 1051the end of the logical line only; option B<-tcw>.
1133 1052
1053=item B<disablePasteBrackets:> I<boolean>
1054
1055Prevent emission of paste bracket sequences; option B<-dpb>.
1056
1134=item B<insecure:> I<boolean> 1057=item B<insecure:> I<boolean>
1135 1058
1136Enables "insecure" mode. Rxvt-unicode offers some escape sequences that 1059Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1137echo arbitrary strings like the icon name or the locale. This could be 1060echo arbitrary strings like the icon name or the locale. This could be
1138abused if somebody gets 8-bit-clean access to your display, whether 1061abused if somebody gets 8-bit-clean access to your display, whether
1139through a mail client displaying mail bodies unfiltered or through 1062through a mail client displaying mail bodies unfiltered or through
1140write(1) or any other means. Therefore, these sequences are disabled by 1063write(1) or any other means. Therefore, these sequences are disabled by
1141default. (Note that many other terminals, including xterm, have these 1064default. (Note that many other terminals, including xterm, have these
… …
1159 1082
1160=item B<secondaryScreen:> I<boolean> 1083=item B<secondaryScreen:> I<boolean>
1161 1084
1162Turn on/off secondary screen (default enabled). 1085Turn on/off secondary screen (default enabled).
1163 1086
1087=item B<rewrapMode:> I<mode>
1088
1089Sets long line rewrap behaviour on window resize to one of B<auto>
1090(default), B<always> or B<never>.
1091
1164=item B<secondaryScroll:> I<boolean> 1092=item B<secondaryScroll:> I<boolean>
1165 1093
1166Turn on/off secondary screen scroll (default enabled). If this 1094Turn on/off secondary screen scroll (default enabled). If this
1167option is enabled, scrolls on the secondary screen will change the 1095option is enabled, scrolls on the secondary screen will change the
1168scrollback buffer and, when secondaryScreen is off, switching 1096scrollback buffer and, when secondaryScreen is off, switching
… …
1180Sets the working directory for the shell (or the command specified via 1108Sets the working directory for the shell (or the command specified via
1181B<-e>). The I<path> must be an absolute path and it must exist for 1109B<-e>). The I<path> must be an absolute path and it must exist for
1182@@RXVT_NAME@@ to start. If it isn't specified then the current working 1110@@RXVT_NAME@@ to start. If it isn't specified then the current working
1183directory will be used; option B<-cd>. 1111directory will be used; option B<-cd>.
1184 1112
1185=item B<keysym.>I<sym>: I<string> 1113=item B<keysym.>I<sym>: I<action>
1186 1114
1187Compile I<frills>: Associate I<string> with keysym I<sym>. The 1115Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1188intervening resource name B<keysym.> cannot be omitted. 1116resource name B<keysym.> cannot be omitted.
1189 1117
1190The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1118Using this resource, you can map key combinations such as
1191any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1119C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1192B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1120string than would normally result from that combination, making the
1193and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1121terminal scroll up or down the way you want it, or any other thing an
1194B<2>, B<3>, B<4>, B<5>. 1122extension might provide.
1123
1124The key combination that triggers the action, I<sym>, has the following format:
1125
1126 (modifiers-)key
1127
1128Where I<modifiers> can be any combination of the following full or
1129abbreviated modifier names:
1130
1131=begin table
1132
1133 B<ISOLevel3> B<I>
1134 B<AppKeypad> B<K>
1135 B<Control> B<C>
1136 B<NumLock> B<N>
1137 B<Shift> B<S>
1138 B<Meta> B<M> I<or> B<A>
1139 B<Lock> B<L>
1140 B<Mod1> B<1>
1141 B<Mod2> B<2>
1142 B<Mod3> B<3>
1143 B<Mod4> B<4>
1144 B<Mod5> B<5>
1145
1146=end table
1195 1147
1196The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1148The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1197whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1149whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1198keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1150keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1199current application keymap mode state. 1151current application keymap mode state.
1200 1152
1201The spellings of I<key> can be obtained by using B<xev>(1) command or 1153Due the the large number of modifier combinations, a key mapping will
1202searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1154match if I<at least> the specified identifiers are being set, and no other
1155key mappings with those and more bits are being defined. That means that
1156defining a mapping for C<a> will automatically provide definitions for
1157C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1158themselves. See the C<builtin:> action, below, for a way to work around
1159this when this is a problem.
1160
1161The spelling of I<key> depends on your implementation of X. An easy way to
1162find a key name is to use the B<xev>(1) command. You can find a list by
1163looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1203omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1164the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1204keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1165value (B<0x0000 - 0xFFFF>).
1205performed in an exact manner; however, the closest match is assured.
1206 1166
1207I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1167As with any resource value, the I<action> string may contain backslash
1168escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1208number), see RESOURCES in C<man 7 X> for further details. 1169number), see RESOURCES in C<man 7 X> for further details.
1209 1170
1210You can define a range of keysyms in one shot by 1171An action starts with an action prefix that selects a certain type
1211loading the C<keysym-list> perl extension and providing a I<string> 1172of action, followed by a colon. An action string without colons is
1212with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1173interpreted as a literal string to pass to the tty (as if it was
1174prefixed with C<string:>).
1175
1176The following action prefixes are known - extensions can provide
1177additional prefixes:
1178
1179=over
1180
1181=item string:STRING
1182
1183If the I<action> starts with C<string:> (or otherwise contains no colons),
1184then the remaining C<STRING> will be passed to the program running in the
1185terminal. For example, you could replace whatever Shift-Tab outputs by the
1186string C<echo rm -rf /> followed by a newline:
1187
1188 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1189
1190This could in theory be used to completely redefine your keymap.
1191
1192In addition, for actions of this type, you can define a range of
1193keysyms in one shot by loading the C<keysym-list> perl extension and
1194providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1213should be a character not used by the strings. 1195the delimiter `/' should be a character not used by the strings.
1214 1196
1215Its usage can be demonstrated by an example: 1197Its usage can be demonstrated by an example:
1216 1198
1217 URxvt.keysym.M-C-0x61: list|\033<|abc|> 1199 URxvt.keysym.M-C-0x61: list|\033<|abc|>
1218 1200
1219The above line is equivalent to the following three lines: 1201The above line is equivalent to the following three lines:
1220 1202
1221 URxvt.keysym.Meta-Control-0x61: \033<a> 1203 URxvt.keysym.Meta-Control-0x61: string:\033<a>
1222 URxvt.keysym.Meta-Control-0x62: \033<b> 1204 URxvt.keysym.Meta-Control-0x62: string:\033<b>
1223 URxvt.keysym.Meta-Control-0x63: \033<c> 1205 URxvt.keysym.Meta-Control-0x63: string:\033<c>
1224 1206
1207=item command:STRING
1208
1225If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1209If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1226is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1210is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1211the opposite of C<string:> - instead of sending it to the program running
1212in the terminal, it will be treated as if it were program output). This is
1213most useful to feed command sequences into @@RXVT_NAME@@.
1214
1227example the following means "change the current locale to C<zh_CN.GBK> 1215For example the following means "change the current locale to C<zh_CN.GBK>
1228when Control-Meta-c is being pressed": 1216when Control-Meta-c is being pressed":
1229 1217
1230 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1218 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1231 1219
1232If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1220The following example will map Control-Meta-1 and Control-Meta-2 to
1233is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3) 1221the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1234manpage. For example, the F<selection> extension (activated via 1222font-switching at runtime:
1235C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1236 1223
1237 URxvt.keysym.M-C-c: perl:selection:rot13 1224 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1225 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1238 1226
1239Due the the large number of modifier combinations, a defined key mapping 1227Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1240will match if I<at least> the specified identifiers are being set, and 1228info):
1241no other key mappings with those and more bits are being defined. That
1242means that defining a key map for C<a> will automatically provide
1243definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1244mappings themselves.
1245 1229
1246Unfortunately, this will override built-in key mappings. For example 1230 URxvt.keysym.M-C-3: command:\033[8;25;80t
1231 URxvt.keysym.M-C-4: command:\033[8;48;110t
1232
1233=item builtin:
1234
1235The builtin action is the action that @@RXVT_NAME@@ would execute if no
1236key binding existed for the key combination. The obvious use is to undo
1237the effect of existing bindings. The not so obvious use is to reinstate
1238bindings when another binding overrides too many modifiers.
1239
1247if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1240For example if you overwrite the C<Insert> key you will disable
1248C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1241@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1249user-defined keymap using the C<builtin:> replacement: 1242"holes" into the user-defined keymap using the C<builtin:> replacement:
1250 1243
1251 URxvt.keysym.Insert: <my insert key sequence> 1244 URxvt.keysym.Insert: <my insert key sequence>
1252 URxvt.keysym.S-Insert: builtin: 1245 URxvt.keysym.S-Insert: builtin:
1253 1246
1254The first line defines a mapping for C<Insert> and I<any> combination 1247The first line defines a mapping for C<Insert> and I<any> combination
1255of modifiers. The second line re-establishes the default mapping for 1248of modifiers. The second line re-establishes the default mapping for
1256C<Shift-Insert>. 1249C<Shift-Insert>.
1257 1250
1258The following example will map Control-Meta-1 and Control-Meta-2 to 1251=item builtin-string:
1259the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1260font-switching at runtime:
1261 1252
1262 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1253This action is mainly useful to restore string mappings for keys that
1263 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1254have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1255difficult to explain - basically, this action will send the string to the
1256application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1257action for it.
1264 1258
1265Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1259An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1266info): 1260selection when you press C<Shift-Insert>. With the following bindings, it
1261would instead emit the (undocumented, but what applications running in the
1262terminal might expect) sequence C<ESC [ 2 $> instead:
1267 1263
1268 URxvt.keysym.M-C-3: command:\033[8;25;80t 1264 URxvt.keysym.S-Insert: builtin-string:
1269 URxvt.keysym.M-C-4: command:\033[8;48;110t 1265 URxvt.keysym.C-S-Insert: builtin:
1266
1267The first line disables the paste functionality for that key
1268combination, and the second reinstates the default behaviour for
1269C<Control-Shift-Insert>, which would otherwise be overridden.
1270
1271Similarly, to let applications gain access to the C<C-M-c> (copy to
1272clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1273this:
1274
1275 URxvt.keysym.C-M-c: builtin-string:
1276 URxvt.keysym.C-M-v: builtin-string:
1277
1278=item EXTENSION:STRING
1279
1280An action of this form invokes the action B<STRING>, if any, provided
1281by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
1282be loaded automatically if necessary.
1283
1284Not all extensions define actions, but popular extensions that do
1285include the I<selection> and I<matcher> extensions (documented in their
1286own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1287respectively).
1288
1289From the silly examples department, this will rot13-"encrypt"
1290@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1291keyboards:
1292
1293 URxvt.keysym.M-C-c: selection:rot13
1294
1295=item perl:STRING *DEPRECATED*
1296
1297This is a deprecated way of invoking commands provided by perl
1298extensions. It is still supported, but should not be used anymore.
1299
1300=back
1270 1301
1271=item B<perl-ext-common>: I<string> 1302=item B<perl-ext-common>: I<string>
1272 1303
1273=item B<perl-ext>: I<string> 1304=item B<perl-ext>: I<string>
1274 1305
1275Comma-separated list(s) of perl extension scripts (default: C<default>) to 1306Comma-separated list(s) of perl extension scripts (default: C<default>) to
1276use in this terminal instance; option B<-pe>. 1307use in this terminal instance; option B<-pe>.
1277 1308
1278Extension names can be prefixed with a C<-> sign to prohibit using 1309Extension names can be prefixed with a C<-> sign to remove them again, in
1279them. This can be useful to selectively disable some extensions loaded 1310case they had been specified earlier. This can be useful to selectively
1280by default, or specified via the C<perl-ext-common> resource. For 1311disable some extensions loaded by default, or specified via the
1281example, C<default,-selection> will use all the default extension except 1312C<perl-ext-common> resource. For example, C<default,-selection> will use
1282C<selection>. 1313all the default extensions except C<selection>.
1283 1314
1284Extension names can also be followed by an argument in angle brackets 1315To prohibit autoloading of extensions, you can prefix them with C</>,
1285(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1316which will make urxvt refuse to automatically load them (this can be
1286searchable scrollback to Alt/Meta-s). Mentioning the same extension 1317overriden, however, by specifying the extension name again without a
1287multiple times with different arguments will pass multiple arguments to 1318prefix, though). This does not prohibit extensions themselves loading
1288the extension. 1319other extensions. For example, C<default,/background> will keep the
1320C<background> extension from being loaded when a background OSC sequence
1321is received.
1322
1323The default set includes the C<selection>, C<option-popup>,
1324C<selection-popup>, C<readline>, C<searchable-scrollback> and
1325C<confirm-paste> extensions, as well as any extensions which are mentioned
1326in B<keysym> resources.
1327
1328Any extension such that a corresponding resource is given on the
1329command line is automatically appended to B<perl-ext>.
1289 1330
1290Each extension is looked up in the library directories, loaded if 1331Each extension is looked up in the library directories, loaded if
1291necessary, and bound to the current terminal instance. 1332necessary, and bound to the current terminal instance. When the library
1333search path contains multiple extension files of the same name, then the
1334first one found will be used.
1292 1335
1293If both of these resources are the empty string, then the perl 1336If both of these resources are the empty string, then the perl interpreter
1294interpreter will not be initialized. The idea behind two options is that 1337will not be initialized. The rationale for having two options is that
1295B<perl-ext-common> will be used for extensions that should be available to 1338B<perl-ext-common> will be used for extensions that should be available to
1296all instances, while B<perl-ext> is used for specific instances. 1339all instances, while B<perl-ext> is used for specific instances.
1297 1340
1298=item B<perl-eval>: I<string> 1341=item B<perl-eval>: I<string>
1299 1342
… …
1301the @@RXVT_NAME@@perl(3) manpage. 1344the @@RXVT_NAME@@perl(3) manpage.
1302 1345
1303=item B<perl-lib>: I<path> 1346=item B<perl-lib>: I<path>
1304 1347
1305Colon-separated list of additional directories that hold extension 1348Colon-separated list of additional directories that hold extension
1306scripts. When looking for perl extensions, @@RXVT_NAME@@ will first 1349scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1307look in these directories, then in $HOME/.urxvt/ext and lastly in 1350in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1308F<@@RXVT_LIBDIR@@/urxvt/perl/>. 1351lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1309 1352
1310See the @@RXVT_NAME@@perl(3) manpage. 1353See the @@RXVT_NAME@@perl(3) manpage.
1311 1354
1312=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1355=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1313 1356
… …
1317=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1360=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1318 1361
1319Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1362Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1320for details. 1363for details.
1321 1364
1322=item B<searchable-scrollback:> I<keysym> 1365=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1323 1366
1324Sets the hotkey that starts the incremental scrollback buffer search 1367This resource is deprecated and will be removed. Use a B<keysym> resource
1325(default: C<M-s>). 1368instead, e.g.:
1326 1369
1370 URxvt.keysym.M-s: searchable-scrollback:start
1371
1327=item B<urlLauncher>: I<string> 1372=item B<url-launcher>: I<string>
1328 1373
1329Specifies the program to be started with a URL argument. Used by the 1374Specifies the program to be started with a URL argument. Used by the
1330C<selection-popup> and C<matcher> perl extensions. 1375C<selection-popup> and C<matcher> perl extensions.
1331 1376
1332=item B<transient-for>: I<windowid> 1377=item B<transient-for>: I<windowid>
… …
1376=head1 THE SELECTION: SELECTING AND PASTING TEXT 1421=head1 THE SELECTION: SELECTING AND PASTING TEXT
1377 1422
1378The behaviour of text selection and insertion/pasting mechanism is similar 1423The behaviour of text selection and insertion/pasting mechanism is similar
1379to I<xterm>(1). 1424to I<xterm>(1).
1380 1425
1381=over 4 1426=over
1382 1427
1383=item B<Selecting>: 1428=item B<Selecting>:
1384 1429
1385Left click at the beginning of the region, drag to the end of the region 1430Left click at the beginning of the region, drag to the end of the region
1386and release; Right click to extend the marked region; Left double-click 1431and release; Right click to extend the marked region; Left double-click
… …
1401B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1446B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1402 1447
1403Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1448Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1404inserted too. 1449inserted too.
1405 1450
1451rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1452<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1453binding causes the value of the internal selection to be copied to the
1454CLIPBOARD selection, while the second binding causes the value of the
1455CLIPBOARD selection to be inserted.
1456
1406=back 1457=back
1407 1458
1408=head1 CHANGING FONTS 1459=head1 CHANGING FONTS
1409 1460
1410Changing fonts (or font sizes, respectively) via the keypad is not yet 1461Changing fonts (or font sizes, respectively) via the keypad is not yet
… …
1427and character codes using the keyboard. It consists of 4 parts. The 1478and character codes using the keyboard. It consists of 4 parts. The
1428first part is available if rxvt-unicode has been compiled with 1479first part is available if rxvt-unicode has been compiled with
1429C<--enable-frills>, the rest is available when rxvt-unicode was compiled 1480C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1430with C<--enable-iso14755>. 1481with C<--enable-iso14755>.
1431 1482
1432=over 4 1483=over
1433 1484
1434=item * 5.1: Basic method 1485=item * 5.1: Basic method
1435 1486
1436This allows you to enter unicode characters using their hexcode. 1487This allows you to enter unicode characters using their hexcode.
1437 1488
… …
1498In addition to the default foreground and background colours, 1549In addition to the default foreground and background colours,
1499B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus 1550B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1500high-intensity (potentially bold/blink) versions of the same, and 72 (or 1551high-intensity (potentially bold/blink) versions of the same, and 72 (or
1501240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB 1552240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1502cube plus a 8 (24) colour greyscale ramp. 1553cube plus a 8 (24) colour greyscale ramp.
1554
1555B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
1556C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
1557number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
1558colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
155924-bit colour space. When indexing collisions happen, the nearest old colour in
1560the cube will be adapted to the new 24-bit RGB colour. That means one cannot
1561use many similar 24-bit colours. It's typically not a problem in common
1562scenarios.
1503 1563
1504Here is a list of the ANSI colours with their names. 1564Here is a list of the ANSI colours with their names.
1505 1565
1506=begin table 1566=begin table
1507 1567
… …
1534The following text gives values for the standard 88 colour mode (and 1594The following text gives values for the standard 88 colour mode (and
1535values for the 256 colour mode in parentheses). 1595values for the 256 colour mode in parentheses).
1536 1596
1537The RGB cube uses indices 16..79 (16..231) using the following formulas: 1597The RGB cube uses indices 16..79 (16..231) using the following formulas:
1538 1598
1539 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3 1599 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1540 index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15 1600 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1541 1601
1542The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10% 1602The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1543steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of 1603steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1544the RGB cube. 1604the RGB cube.
1545 1605
… …
1608 1668
1609=head1 ENVIRONMENT 1669=head1 ENVIRONMENT
1610 1670
1611B<@@RXVT_NAME@@> sets and/or uses the following environment variables: 1671B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1612 1672
1613=over 4 1673=over
1614 1674
1615=item B<TERM> 1675=item B<TERM>
1616 1676
1617Normally set to C<rxvt-unicode>, unless overwritten at configure time, via 1677Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1618resources or on the command line. 1678resources or on the command line.
… …
1653 1713
1654=item B<SHELL> 1714=item B<SHELL>
1655 1715
1656The shell to be used for command execution, defaults to C</bin/sh>. 1716The shell to be used for command execution, defaults to C</bin/sh>.
1657 1717
1658=item B<RXVT_SOCKET> 1718=item B<RXVT_SOCKET> [I<sic>]
1659 1719
1660The unix domain socket path used by @@RXVT_NAME@@c(1) and 1720The unix domain socket path used by @@RXVT_NAME@@c(1) and
1661@@RXVT_NAME@@d(1). 1721@@RXVT_NAME@@d(1).
1662 1722
1663Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>. 1723Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1724
1725=item B<URXVT_PERL_LIB>
1726
1727Additional F<:>-separated library search path for perl extensions. Will be
1728searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1729directory.
1730
1731=item B<URXVT_PERL_VERBOSITY>
1732
1733See L<@@RXVT_NAME@@perl>(3).
1664 1734
1665=item B<HOME> 1735=item B<HOME>
1666 1736
1667Used to locate the default directory for the unix domain socket for 1737Used to locate the default directory for the unix domain socket for
1668daemon communications and to locate various resource files (such as 1738daemon communications and to locate various resource files (such as
… …
1679 1749
1680=back 1750=back
1681 1751
1682=head1 FILES 1752=head1 FILES
1683 1753
1684=over 4 1754=over
1685 1755
1686=item B</usr/lib/X11/rgb.txt> 1756=item B</usr/lib/X11/rgb.txt>
1687 1757
1688Colour names. 1758Colour names.
1689 1759
1690=back 1760=back
1691 1761
1692=head1 SEE ALSO 1762=head1 SEE ALSO
1693 1763
1764@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1694@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1765@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1695 1766
1696=head1 CURRENT PROJECT COORDINATOR 1767=head1 CURRENT PROJECT COORDINATOR
1697 1768
1698=over 4 1769=over
1699 1770
1700=item Project Coordinator 1771=item Project Coordinator
1701 1772
1702Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1773Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1703 1774
1704L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1775L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1705 1776
1706=back 1777=back
1707 1778
1708=head1 AUTHORS 1779=head1 AUTHORS
1709 1780
1710=over 4 1781=over
1711 1782
1712=item John Bovey 1783=item John Bovey
1713 1784
1714University of Kent, 1992, wrote the original Xvt. 1785University of Kent, 1992, wrote the original Xvt.
1715 1786
1716=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1787=item Rob Nation <nation@rocket.sanders.lockheed.com>
1717 1788
1718very heavily modified Xvt and came up with Rxvt 1789very heavily modified Xvt and came up with Rxvt
1719 1790
1720=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1791=item Angelo Haritsis <ah@doc.ic.ac.uk>
1721 1792
1722wrote the Greek Keyboard Input (no longer in code) 1793wrote the Greek Keyboard Input (no longer in code)
1723 1794
1724=item mj olesen L<< <olesen@me.QueensU.CA> >> 1795=item mj olesen <olesen@me.QueensU.CA>
1725 1796
1726Wrote the menu system. 1797Wrote the menu system.
1727 1798
1728Project Coordinator (changes.txt 2.11 to 2.21) 1799Project Coordinator (changes.txt 2.11 to 2.21)
1729 1800
1730=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1801=item Oezguer Kesim <kesim@math.fu-berlin.de>
1731 1802
1732Project Coordinator (changes.txt 2.21a to 2.4.5) 1803Project Coordinator (changes.txt 2.21a to 2.4.5)
1733 1804
1734=item Geoff Wing L<< <gcw@pobox.com> >> 1805=item Geoff Wing <gcw@pobox.com>
1735 1806
1736Rewrote screen display and text selection routines. 1807Rewrote screen display and text selection routines.
1737 1808
1738Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1809Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1739 1810
1740=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1811=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1741 1812
1742Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1813Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1743extension, random hacks, numerous bugfixes and extensions. 1814extension, random hacks, numerous bugfixes and extensions.
1744 1815
1745Project Coordinator (Changes 1.0 -) 1816Project Coordinator (Changes 1.0 -)
1746 1817
1747=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1818=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1748 1819
1749pty/utmp code rewrite, image code improvements, many random hacks and bugfixes. 1820pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1750 1821
1751=back 1822=back
1752 1823

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines