[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.129 by root, Mon May 28 20:34:56 2007 UTC vs.
Revision 1.233 by sf-exg, Sat May 24 18:41:29 2014 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
17	=head1 FREQUENTLY ASKED QUESTIONS	20	=head1 FREQUENTLY ASKED QUESTIONS
18		21
19	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of	22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
20	frequently asked questions and answer to them and some common	23	frequently asked questions and answer to them and some common
21	problems. That document is also accessible on the World-Wide-Web at	24	problems. That document is also accessible on the World-Wide-Web at
22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.	25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
23		26
24	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
25		28
26	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
27	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
28	world. Being a terminal emulator, however, some things are very difficult,	31	world. Being a terminal emulator, however, some things are very difficult,
29	especially cursive scripts such as arabic, vertically written scripts	32	especially cursive scripts such as arabic, vertically written scripts
30	like mongolian or scripts requiring extremely complex combining rules,	33	like mongolian or scripts requiring extremely complex combining rules,
31	like tibetan or devenagari. Don't expect pretty output when using these	34	like tibetan or devanagari. Don't expect pretty output when using these
32	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work	35	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work
33	fine, though. A somewhat difficult case are right-to-left scripts, such	36	fine, though. A somewhat difficult case are right-to-left scripts, such
34	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms	37	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms
35	belong into the application, not the terminal emulator (too many things --	38	belong in the application, not the terminal emulator (too many things --
36	such as cursor-movement while editing -- break otherwise), but that might	39	such as cursor-movement while editing -- break otherwise), but that might
37	change.	40	change.
38		41
39	If you are looking for a terminal that supports more exotic scripts, let	42	If you are looking for a terminal that supports more exotic scripts, let
40	me recommend C<mlterm>, which is a very user friendly, lean and clean	43	me recommend C<mlterm>, which is a very user friendly, lean and clean
…		…
89		92
90	Print out a message describing available options.	93	Print out a message describing available options.
91		94
92	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
93		96
94	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
95	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
96	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
97		100
98	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
99		102
100	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
101	resource B<depth>.	104	resource B<depth>.
102		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for possible
		114	visual ids).
		115
103	=item B<-geometry> I<geom>	116	=item B<-geometry> I<geom>
104		117
105	Window geometry (B<-g> still respected); resource B<geometry>.	118	Window geometry (B<-g> still respected); resource B<geometry>.
106		119
107	=item B<-rv>\|B<+rv>	120	=item B<-rv>\|B<+rv>
108		121
109	Turn on/off simulated reverse video; resource B<reverseVideo>.	122	Turn on/off simulated reverse video; resource B<reverseVideo>.
110		123
111	=item B<-j>\|B<+j>	124	=item B<-j>\|B<+j>
112		125
113	Turn on/off jump scrolling; resource B<jumpScroll>.	126	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
114		127
115	=item B<-ip>\|B<+ip> \| B<-tr>\|B<+tr>	128	=item B<-ss>\|B<+ss>
116		129
117	Turn on/off inheriting parent window's pixmap. Alternative form is	130	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
118	B<-tr>; resource B<inheritPixmap>.
119
120	I<Please note that transparency of any kind if completely unsupported by
121	the author. Don't bug him with installation questions! Read the FAQ (man 7
122	@@RXVT_NAME@@)!>
123		131
124	=item B<-fade> I<number>	132	=item B<-fade> I<number>
125		133
126	Fade the text by the given percentage when focus is lost. Small values	134	Fade the text by the given percentage when focus is lost. Small values
127	fade a little only, 100 completely replaces all colours by the fade	135	fade a little only, 100 completely replaces all colours by the fade
…		…
130	=item B<-fadecolor> I<colour>	138	=item B<-fadecolor> I<colour>
131		139
132	Fade to this colour when fading is used (see B<-fade>). The default colour	140	Fade to this colour when fading is used (see B<-fade>). The default colour
133	is opaque black. resource B<fadeColor>.	141	is opaque black. resource B<fadeColor>.
134		142
135	=item B<-tint> I<colour>	143	=item B<-icon> I<file>
136		144
137	Tint the transparent background pixmap with the given colour when	145	Compile I<pixbuf>: Use the specified image as application icon. This
138	transparency is enabled with B<-tr> or B<-ip>. This only works for	146	is used by many window managers, taskbars and pagers to represent the
139	non-tiled backgrounds, currently. See also the B<-sh> option that can be	147	application window; resource I<iconFile>.
140	used to brighten or darken the image in addition to tinting it; resource
141	I<tintColor>. Example:
142
143	@@RXVT_NAME@@ -tr -tint blue -sh 40
144
145	=item B<-sh>
146
147	I<number> Darken (0 .. 100) or lighten (-1 .. -100) the transparent
148	background image in addition to tinting it (i.e. B<-tint> must be
149	specified, too, e.g. C<-tint white>); resource I<shading>.
150		148
151	=item B<-bg> I<colour>	149	=item B<-bg> I<colour>
152		150
153	Window background colour; resource B<background>.	151	Window background colour; resource B<background>.
154		152
155	=item B<-fg> I<colour>	153	=item B<-fg> I<colour>
156		154
157	Window foreground colour; resource B<foreground>.	155	Window foreground colour; resource B<foreground>.
158
159	=item B<-pixmap> I<file[;geom]>
160
161	Compile I<XPM>: Specify XPM file for the background and also optionally
162	specify its scaling with a geometry string. Note you may need to
163	add quotes to avoid special shell interpretation of the C<;> in the
164	command-line; resource B<backgroundPixmap>.
165		156
166	=item B<-cr> I<colour>	157	=item B<-cr> I<colour>
167		158
168	The cursor colour; resource B<cursorColor>.	159	The cursor colour; resource B<cursorColor>.
169		160
…		…
214	italic> >> characters are to be printed. See resource B<boldItalicFont>	205	italic> >> characters are to be printed. See resource B<boldItalicFont>
215	for details.	206	for details.
216		207
217	=item B<-is>\|B<+is>	208	=item B<-is>\|B<+is>
218		209
219	Compile I<font-styles>: Bold/Italic font styles imply high intensity	210	Compile I<font-styles>: Bold/Blink font styles imply high intensity
220	foreground/background (default). See resource B<intensityStyles> for	211	foreground/background (default). See resource B<intensityStyles> for
221	details.	212	details.
222		213
223	=item B<-name> I<name>	214	=item B<-name> I<name>
224		215
…		…
242		233
243	=item B<-sb>\|B<+sb>	234	=item B<-sb>\|B<+sb>
244		235
245	Turn on/off scrollbar; resource B<scrollBar>.	236	Turn on/off scrollbar; resource B<scrollBar>.
246		237
		238	=item B<-sr>\|B<+sr>
		239
		240	Put scrollbar on right/left; resource B<scrollBar_right>.
		241
		242	=item B<-st>\|B<+st>
		243
		244	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		245	resource B<scrollBar_floating>.
		246
247	=item B<-si>\|B<+si>	247	=item B<-si>\|B<+si>
248		248
249	Turn on/off scroll-to-bottom on TTY output inhibit; resource	249	Turn on/off scroll-to-bottom on TTY output inhibit; resource
250	B<scrollTtyOutput> has opposite effect.	250	B<scrollTtyOutput> has opposite effect.
251		251
…		…
257	=item B<-sw>\|B<+sw>	257	=item B<-sw>\|B<+sw>
258		258
259	Turn on/off scrolling with the scrollback buffer as new lines appear.	259	Turn on/off scrolling with the scrollback buffer as new lines appear.
260	This only takes effect if B<-si> is also given; resource	260	This only takes effect if B<-si> is also given; resource
261	B<scrollWithBuffer>.	261	B<scrollWithBuffer>.
262
263	=item B<-sr>\|B<+sr>
264
265	Put scrollbar on right/left; resource B<scrollBar_right>.
266
267	=item B<-st>\|B<+st>
268
269	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
270	resource B<scrollBar_floating>.
271		262
272	=item B<-ptab>\|B<+ptab>	263	=item B<-ptab>\|B<+ptab>
273		264
274	If enabled (default), "Horizontal Tab" characters are being stored as	265	If enabled (default), "Horizontal Tab" characters are being stored as
275	actual wide characters in the screen buffer, which makes it possible to	266	actual wide characters in the screen buffer, which makes it possible to
…		…
279		270
280	=item B<-bc>\|B<+bc>	271	=item B<-bc>\|B<+bc>
281		272
282	Blink the cursor; resource B<cursorBlink>.	273	Blink the cursor; resource B<cursorBlink>.
283		274
		275	=item B<-uc>\|B<+uc>
		276
		277	Make the cursor underlined; resource B<cursorUnderline>.
		278
284	=item B<-iconic>	279	=item B<-iconic>
285		280
286	Start iconified, if the window manager supports that option.	281	Start iconified, if the window manager supports that option.
287	Alternative form is B<-ic>.	282	Alternative form is B<-ic>.
288		283
…		…
304		299
305	=item B<-bl>	300	=item B<-bl>
306		301
307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	302	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
308	if honoured by the WM, the rxvt-unicode window will not have window	303	if honoured by the WM, the rxvt-unicode window will not have window
309	decorations; resource B<borderLess>.	304	decorations; resource B<borderLess>. If the window manager does not
		305	support MWM hints (e.g. kwin), enables override-redirect mode.
310		306
311	=item B<-override-redirect>	307	=item B<-override-redirect>
312		308
313	Compile I<frills>: Sets override-redirect on the window; resource	309	Compile I<frills>: Sets override-redirect on the window; resource
314	B<override-redirect>.	310	B<override-redirect>.
…		…
322		318
323	=item B<-lsp> I<number>	319	=item B<-lsp> I<number>
324		320
325	Compile I<frills>: Lines (pixel height) to insert between each row of	321	Compile I<frills>: Lines (pixel height) to insert between each row of
326	the display. Useful to work around font rendering problems; resource	322	the display. Useful to work around font rendering problems; resource
327	B<linespace>.	323	B<lineSpace>.
		324
		325	=item B<-letsp> I<number>
		326
		327	Compile I<frills>: Amount to adjust the computed character width by
		328	to control overall letter spacing. Negative values will tighten up the
		329	letter spacing, positive values will space letters out more. Useful to
		330	work around odd font metrics; resource B<letterSpace>.
328		331
329	=item B<-tn> I<termname>	332	=item B<-tn> I<termname>
330		333
331	This option specifies the name of the terminal type to be set in the	334	This option specifies the name of the terminal type to be set in the
332	B<TERM> environment variable. This terminal type must exist in the	335	B<TERM> environment variable. This terminal type must exist in the
…		…
387		390
388	=item B<-tcw>	391	=item B<-tcw>
389		392
390	Change the meaning of triple-click selection with the left mouse	393	Change the meaning of triple-click selection with the left mouse
391	button. Only effective when the original (non-perl) selection code is	394	button. Only effective when the original (non-perl) selection code is
392	in-use. Instead of selecting a full line it will extend the selection the	395	in-use. Instead of selecting a full line it will extend the selection to
393	end of the logical line only. resource B<tripleclickwords>.	396	the end of the logical line only. resource B<tripleclickwords>.
394		397
395	=item B<-insecure>	398	=item B<-insecure>
396		399
397	Enable "insecure" mode, which currently enables most of the escape	400	Enable "insecure" mode, which currently enables most of the escape
398	sequences that echo strings. See the resource B<insecure> for more	401	sequences that echo strings. See the resource B<insecure> for more
…		…
418		421
419	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	422	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
420	will not immediately destroy its window when the program executed within	423	will not immediately destroy its window when the program executed within
421	it exits. Instead, it will wait till it is being killed or closed by the	424	it exits. Instead, it will wait till it is being killed or closed by the
422	user; resource B<hold>.	425	user; resource B<hold>.
		426
		427	=item B<-cd> I<path>
		428
		429	Sets the working directory for the shell (or the command specified via
		430	B<-e>). The I<path> must be an absolute path and it must exist for
		431	@@RXVT_NAME@@ to start; resource B<chdir>.
		432
		433	=item B<-xrm> I<string>
		434
		435	Works like the X Toolkit option of the same name, by adding the I<string>
		436	as if it were specified in a resource file. Resource values specified this
		437	way take precedence over all other resource specifications.
		438
		439	Note that you need to use the I<same> syntax as in the .Xdefaults file,
		440	e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific
		441	options can be specified as long-options on the commandline, so use
		442	of B<-xrm> is mostly limited to cases where you want to specify other
		443	resources (e.g. for input methods) or for compatibility with other
		444	programs.
423		445
424	=item B<-keysym.>I<sym> I<string>	446	=item B<-keysym.>I<sym> I<string>
425		447
426	Remap a key symbol. See resource B<keysym>.	448	Remap a key symbol. See resource B<keysym>.
427		449
…		…
462	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	484	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
463	entries and will not tinker with pty/tty permissions - you have to do that	485	entries and will not tinker with pty/tty permissions - you have to do that
464	yourself if you want that.	486	yourself if you want that.
465		487
466	As an extremely special case, specifying C<-1> will completely suppress	488	As an extremely special case, specifying C<-1> will completely suppress
467	pty/tty operations.	489	pty/tty operations, which is probably only useful in conjunction with some
		490	perl extension that manages the terminal.
468		491
469	Here is a example in perl that illustrates how this option can be used (a	492	Here is a example in perl that illustrates how this option can be used (a
470	longer example is in F<doc/pty-fd>):	493	longer example is in F<doc/pty-fd>):
471		494
472	use IO::Pty;	495	use IO::Pty;
…		…
486	Comma-separated list of perl extension scripts to use (or not to use) in	509	Comma-separated list of perl extension scripts to use (or not to use) in
487	this terminal instance. See resource B<perl-ext> for details.	510	this terminal instance. See resource B<perl-ext> for details.
488		511
489	=back	512	=back
490		513
491	=head1 RESOURCES (available also as long-options)	514	=head1 RESOURCES
492		515
493	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	516	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
494	options) compiled into your version.	517	options) compiled into your version. All resources are also available as
		518	long-options.
495		519
496	You can set and change the resources using X11 tools like B<xrdb>. Many	520	You can set and change the resources using X11 tools like B<xrdb>. Many
497	distribution do also load settings from the B<~/.Xresources> file when X	521	distribution do also load settings from the B<~/.Xresources> file when X
498	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	522	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
499	with later settings overwriting earlier ones:	523	with later settings overwriting earlier ones:
500		524
501	1. system-wide app-defaults file, either locale-dependent OR global
502	2. app-defaults file in $XAPPLRESDIR	525	1. app-defaults file in $XAPPLRESDIR
		526	2. $HOME/.Xdefaults
503	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	527	3. RESOURCE_MANAGER property on root-window of screen 0
504	4. SCREEN_RESOURCES for the current screen	528	4. SCREEN_RESOURCES property on root-window of the current screen
505	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	529	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
		530	6. resources specified via -xrm on the commandline
506		531
507	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	532	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
508	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	533	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
509	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily	534	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
510	configured, while the class name B<URxvt> allows resources unique to	535	configured, while the class name B<URxvt> allows resources unique to
…		…
520	=item B<depth:> I<bitdepth>	545	=item B<depth:> I<bitdepth>
521		546
522	Compile I<xft>: Attempt to find a visual with the given bit depth;	547	Compile I<xft>: Attempt to find a visual with the given bit depth;
523	option B<-depth>.	548	option B<-depth>.
524		549
		550	=item B<buffered:> I<boolean>
		551
		552	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		553	On some card/driver combination enabling it slightly decreases
		554	performance, on most it greatly helps it. The slowdown is small, so it
		555	should normally be enabled.
		556
525	=item B<geometry:> I<geom>	557	=item B<geometry:> I<geom>
526		558
527	Create the window with the specified X window geometry [default 80x24];	559	Create the window with the specified X window geometry [default 80x24];
528	option B<-geometry>.	560	option B<-geometry>.
529		561
…		…
542	Use the specified colour for the colour value I<n>, where 0-7	574	Use the specified colour for the colour value I<n>, where 0-7
543	corresponds to low-intensity (normal) colours and 8-15 corresponds to	575	corresponds to low-intensity (normal) colours and 8-15 corresponds to
544	high-intensity (bold = bright foreground, blink = bright background)	576	high-intensity (bold = bright foreground, blink = bright background)
545	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	577	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
546	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	578	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
547	names used are listed in the B<COLORS AND GRAPHICS> section.	579	names used are listed in the B<COLOURS AND GRAPHICS> section.
548		580
549	Colours higher than 15 cannot be set using resources (yet), but can be	581	Colours higher than 15 cannot be set using resources (yet), but can be
550	changed using an escape command (see @@RXVT_NAME@@(7)).	582	changed using an escape command (see @@RXVT_NAME@@(7)).
551		583
552	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	584	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
563	=item B<colorUL:> I<colour>	595	=item B<colorUL:> I<colour>
564		596
565	Use the specified colour to display underlined characters when the	597	Use the specified colour to display underlined characters when the
566	foreground colour is the default.	598	foreground colour is the default.
567		599
568	=item B<colorRV:> I<colour>
569
570	Use the specified colour as the background for reverse video characters
571	when OPTION_HC is disabled (--disable-frills).
572
573	=item B<underlineColor:> I<colour>	600	=item B<underlineColor:> I<colour>
574		601
575	If set, use the specified colour as the colour for the underline	602	If set, use the specified colour as the colour for the underline
576	itself. If unset, use the foreground colour.	603	itself. If unset, use the foreground colour.
		604
		605	=item B<highlightColor:> I<colour>
		606
		607	If set, use the specified colour as the background for highlighted
		608	characters. If unset, use reverse video.
		609
		610	=item B<highlightTextColor:> I<colour>
		611
		612	If set and highlightColor is set, use the specified colour as the
		613	foreground for highlighted characters.
577		614
578	=item B<cursorColor:> I<colour>	615	=item B<cursorColor:> I<colour>
579		616
580	Use the specified colour for the cursor. The default is to use the	617	Use the specified colour for the cursor. The default is to use the
581	foreground colour; option B<-cr>.	618	foreground colour; option B<-cr>.
…		…
588		625
589	=item B<reverseVideo:> I<boolean>	626	=item B<reverseVideo:> I<boolean>
590		627
591	B<True>: simulate reverse video by foreground and background colours;	628	B<True>: simulate reverse video by foreground and background colours;
592	option B<-rv>. B<False>: regular screen colours [default]; option	629	option B<-rv>. B<False>: regular screen colours [default]; option
593	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	630	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
594		631
595	=item B<jumpScroll:> I<boolean>	632	=item B<jumpScroll:> I<boolean>
596		633
597	B<True>: specify that jump scrolling should be used. When scrolling	634	B<True>: specify that jump scrolling should be used. When receiving lots
598	quickly, fewer screen updates are performed [default]; option B<-j>.	635	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
		636	has been read, resulting in fewer updates while still displaying every
		637	received line; option B<-j>.
		638
599	B<False>: specify that smooth scrolling should be used; option B<+j>.	639	B<False>: specify that smooth scrolling should be used. @@RXVT_NAME@@ will
		640	force a screen refresh on each new line it received; option B<+j>.
600		641
601	=item B<inheritPixmap:> I<boolean>	642	=item B<skipScroll:> I<boolean>
602		643
603	B<True>: make the background inherit the parent windows' pixmap, giving	644	B<True>: (the default) specify that skip scrolling should be used. When
604	artificial transparency. B<False>: do not inherit the parent windows'	645	receiving lots of lines, @@RXVT_NAME@@ will only scroll once in a while
605	pixmap.	646	(around 60 times per second), resulting in far fewer updates. This can
		647	result in @@RXVT_NAME@@ not ever displaying some of the lines it receives;
		648	option B<-ss>.
606		649
607	I<Please note that transparency of any kind if completely unsupported by	650	B<False>: specify that everything is to be displayed, even
608	the author. Don't bug him with installation questions!>	651	if the refresh is too fast for the human eye to read anything (or the
		652	monitor to display anything); option B<+ss>.
609		653
610	=item B<fading:> I<number>	654	=item B<fading:> I<number>
611		655
612	Fade the text by the given percentage when focus is lost; option B<-fade>.	656	Fade the text by the given percentage when focus is lost; option B<-fade>.
613		657
614	=item B<fadeColor:> I<colour>	658	=item B<fadeColor:> I<colour>
615		659
616	Fade to this colour, when fading is used (see B<fading:>). The default	660	Fade to this colour, when fading is used (see B<fading:>). The default
617	colour is black; option B<-fadecolor>.	661	colour is black; option B<-fadecolor>.
618		662
619	=item B<tintColor:> I<colour>	663	=item B<iconFile:> I<file>
620		664
621	Tint the transparent background pixmap with the given colour; option	665	Set the application icon pixmap; option B<-icon>.
622	B<-tint>.
623
624	=item B<shading:> I<number>
625
626	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
627	in addition to tinting it; option B<-sh>.
628		666
629	=item B<scrollColor:> I<colour>	667	=item B<scrollColor:> I<colour>
630		668
631	Use the specified colour for the scrollbar [default #B2B2B2].	669	Use the specified colour for the scrollbar [default #B2B2B2].
632		670
…		…
637		675
638	=item B<borderColor:> I<colour>	676	=item B<borderColor:> I<colour>
639		677
640	The colour of the border around the text area and between the scrollbar	678	The colour of the border around the text area and between the scrollbar
641	and the text.	679	and the text.
642
643	=item B<backgroundPixmap:> I<file[;geom]>
644
645	Use the specified XPM file (note the `.xpm' extension is optional) for
646	the background and also optionally specify its scaling with a geometry
647	string B<WxH+X+Y>, in which B<"W" / "H"> specify the
648	horizontal/vertical scale (percent) and B<"X" / "Y"> locate the image
649	centre (percent). A scale of 0 displays the image with tiling. A scale
650	of 1 displays the image without any scaling. A scale of 2 to 9
651	specifies an integer number of images in that direction. No image will
652	be magnified beyond 10 times its original size. The maximum permitted
653	scale is 1000. [default 0x0+50+50]
654
655	=item B<path:> I<path>
656
657	Specify the colon-delimited search path for finding XPM files.
658		680
659	=item B<font:> I<fontlist>	681	=item B<font:> I<fontlist>
660		682
661	Select the fonts to be used. This is a comma separated list of font names	683	Select the fonts to be used. This is a comma separated list of font names
662	that are checked in order when trying to find glyphs for characters. The	684	that are checked in order when trying to find glyphs for characters. The
…		…
685	it is named first) and thus defines the character cell grid to be 9 pixels	707	it is named first) and thus defines the character cell grid to be 9 pixels
686	wide and 15 pixels high.	708	wide and 15 pixels high.
687		709
688	The second font is just used to add additional unicode characters not in	710	The second font is just used to add additional unicode characters not in
689	the base font, likewise the third, which is unfortunately non-bold, but	711	the base font, likewise the third, which is unfortunately non-bold, but
690	the bold version of the font does contain less characters, so this is a	712	the bold version of the font does contain fewer characters, so this is a
691	useful supplement.	713	useful supplement.
692		714
693	The third font is an Xft font with aliasing turned off, and the characters	715	The third font is an Xft font with aliasing turned off, and the characters
694	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	716	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
695	contains other characters, but we are not interested in them.	717	contains other characters, but we are not interested in them.
…		…
719	text font will being used for the given style.	741	text font will being used for the given style.
720		742
721	=item B<intensityStyles:> I<boolean>	743	=item B<intensityStyles:> I<boolean>
722		744
723	When font styles are not enabled, or this option is enabled (B<True>,	745	When font styles are not enabled, or this option is enabled (B<True>,
724	option B<-is>, the default), bold and italic font styles imply high	746	option B<-is>, the default), bold/blink font styles imply high
725	intensity foreground/background colours. Disabling this option (B<False>,	747	intensity foreground/background colours. Disabling this option (B<False>,
726	option B<+is>) disables this behaviour, the high intensity colours are not	748	option B<+is>) disables this behaviour, the high intensity colours are not
727	reachable.	749	reachable.
728		750
729	=item B<selectstyle:> I<mode>
730
731	Set mouse selection style to B<old> which is 2.20, B<oldword> which
732	is xterm style with 2.20 old word selection, or anything else which
733	gives xterm style selection. Only effective when the original (non-perl)
734	selection code is in use.
735
736	=item B<scrollstyle:> I<mode>
737
738	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
739	the author's favourite.
740
741	=item B<title:> I<string>	751	=item B<title:> I<string>
742		752
743	Set window title string, the default title is the command-line	753	Set window title string, the default title is the command-line
744	specified after the B<-e> option, if any, otherwise the application	754	specified after the B<-e> option, if any, otherwise the application
745	name; option B<-title>.	755	name; option B<-title>.
…		…
758	=item B<urgentOnBell:> I<boolean>	768	=item B<urgentOnBell:> I<boolean>
759		769
760	B<True>: set the urgency hint for the wm on receipt of a bell character.	770	B<True>: set the urgency hint for the wm on receipt of a bell character.
761	B<False>: do not set the urgency hint [default].	771	B<False>: do not set the urgency hint [default].
762		772
		773	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		774
763	=item B<visualBell:> I<boolean>	775	=item B<visualBell:> I<boolean>
764		776
765	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	777	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
766	B<False>: no visual bell [default]; option B<+vb>.	778	B<False>: no visual bell [default]; option B<+vb>.
767		779
…		…
790	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	802	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
791		803
792	This creates a new file in your home directory with the screen contents	804	This creates a new file in your home directory with the screen contents
793	every time you hit C<Print>.	805	every time you hit C<Print>.
794		806
		807	=item B<scrollstyle:> I<mode>
		808
		809	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		810	the author's favourite.
		811
		812	=item B<thickness:> I<number>
		813
		814	Set the scrollbar width in pixels.
		815
795	=item B<scrollBar:> I<boolean>	816	=item B<scrollBar:> I<boolean>
796		817
797	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	818	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
798	disable the scrollbar; option B<+sb>.	819	disable the scrollbar; option B<+sb>.
799		820
…		…
818	B<False>: do not scroll to bottom when tty receives output; option	839	B<False>: do not scroll to bottom when tty receives output; option
819	B<+si>.	840	B<+si>.
820		841
821	=item B<scrollWithBuffer:> I<boolean>	842	=item B<scrollWithBuffer:> I<boolean>
822		843
823	B<True>: scroll with scrollback buffer when tty receives new lines (and	844	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
824	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	845	try to show the same lines) and B<scrollTtyOutput> is False; option
825	with scrollback buffer when tty receives new lines; option B<+sw>.	846	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		847	new lines; option B<+sw>.
826		848
827	=item B<scrollTtyKeypress:> I<boolean>	849	=item B<scrollTtyKeypress:> I<boolean>
828		850
829	B<True>: scroll to bottom when a non-special key is pressed. Special keys	851	B<True>: scroll to bottom when a non-special key is pressed. Special keys
830	are those which are intercepted by rxvt-unicode for special handling and	852	are those which are intercepted by rxvt-unicode for special handling and
…		…
861	=item B<termName:> I<termname>	883	=item B<termName:> I<termname>
862		884
863	Specifies the terminal type name to be set in the B<TERM> environment	885	Specifies the terminal type name to be set in the B<TERM> environment
864	variable; option B<-tn>.	886	variable; option B<-tn>.
865		887
866	=item B<linespace:> I<number>	888	=item B<lineSpace:> I<number>
867		889
868	Specifies number of lines (pixel height) to insert between each row of	890	Specifies number of lines (pixel height) to insert between each row of
869	the display [default 0]; option B<-lsp>.	891	the display [default 0]; option B<-lsp>.
870		892
871	=item B<meta8:> I<boolean>	893	=item B<meta8:> I<boolean>
…		…
885		907
886	=item B<cursorBlink:> I<boolean>	908	=item B<cursorBlink:> I<boolean>
887		909
888	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	910	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
889	option B<-bc>.	911	option B<-bc>.
		912
		913	=item B<cursorUnderline:> I<boolean>
		914
		915	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		916	option B<-uc>.
890		917
891	=item B<pointerBlank:> I<boolean>	918	=item B<pointerBlank:> I<boolean>
892		919
893	B<True>: blank the pointer when a key is pressed or after a set number	920	B<True>: blank the pointer when a key is pressed or after a set number
894	of seconds of inactivity. B<False>: the pointer is always visible	921	of seconds of inactivity. B<False>: the pointer is always visible
…		…
908	large number (e.g. C<987654321>) to effectively disable the timeout.	935	large number (e.g. C<987654321>) to effectively disable the timeout.
909		936
910	=item B<backspacekey:> I<string>	937	=item B<backspacekey:> I<string>
911		938
912	The string to send when the backspace key is pressed. If set to B<DEC>	939	The string to send when the backspace key is pressed. If set to B<DEC>
913	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	940	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
914	(code 8) - which can be reversed with the appropriate DEC private mode	941	(code 8) - which can be reversed with the appropriate DEC private mode
915	escape sequence.	942	escape sequence.
916		943
917	=item B<deletekey:> I<string>	944	=item B<deletekey:> I<string>
918		945
…		…
931	will be created). In this mode, characters outside ISO-8859-1 can be used.	958	will be created). In this mode, characters outside ISO-8859-1 can be used.
932		959
933	When the selection extension is not used, only ISO-8859-1 characters can	960	When the selection extension is not used, only ISO-8859-1 characters can
934	be used. If not specified, the built-in default is used:	961	be used. If not specified, the built-in default is used:
935		962
936	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	963	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
937		964
938	=item B<preeditType:> I<style>	965	=item B<preeditType:> I<style>
939		966
940	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	967	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
941		968
…		…
997		1024
998	=item B<secondaryScroll:> I<boolean>	1025	=item B<secondaryScroll:> I<boolean>
999		1026
1000	Turn on/off secondary screen scroll (default enabled). If this	1027	Turn on/off secondary screen scroll (default enabled). If this
1001	option is enabled, scrolls on the secondary screen will change the	1028	option is enabled, scrolls on the secondary screen will change the
1002	scrollback buffer and switching to/from the secondary screen will	1029	scrollback buffer and, when secondaryScreen is off, switching
1003	instead scroll the screen up.	1030	to/from the secondary screen will instead scroll the screen up.
1004		1031
1005	=item B<hold>: I<boolean>	1032	=item B<hold>: I<boolean>
1006		1033
1007	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1034	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1008	will not immediately destroy its window when the program executed within	1035	will not immediately destroy its window when the program executed within
1009	it exits. Instead, it will wait till it is being killed or closed by the	1036	it exits. Instead, it will wait till it is being killed or closed by the
1010	user.	1037	user.
1011		1038
		1039	=item B<chdir>: I<path>
		1040
		1041	Sets the working directory for the shell (or the command specified via
		1042	B<-e>). The I<path> must be an absolute path and it must exist for
		1043	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1044	directory will be used; option B<-cd>.
		1045
1012	=item B<keysym.>I<sym>: I<string>	1046	=item B<keysym.>I<sym>: I<action>
1013		1047
1014	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1048	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1015	intervening resource name B<keysym.> cannot be omitted.	1049	resource name B<keysym.> cannot be omitted.
1016		1050
1017	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1051	Using this resource, you can map key combinations such as
1018	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1052	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1019	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1053	string than would normally result from that combination, making the
1020	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1054	terminal scroll up or down the way you want it, or any other thing an
1021	B<2>, B<3>, B<4>, B<5>.	1055	extension might provide.
		1056
		1057	The key combination that triggers the action, I<sym>, has the following format:
		1058
		1059	(modifiers-)key
		1060
		1061	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1062	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1063	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1064	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1022		1065
1023	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1066	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1024	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1067	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1025	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1068	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1026	current application keymap mode state.	1069	current application keymap mode state.
1027		1070
1028	The spellings of I<key> can be obtained by using B<xev>(1) command or	1071	Due the the large number of modifier combinations, a key mapping will
1029	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1072	match if I<at least> the specified identifiers are being set, and no other
		1073	key mappings with those and more bits are being defined. That means that
		1074	defining a mapping for C<a> will automatically provide definitions for
		1075	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1076	themselves. See the C<builtin:> action, below, for a way to work around
		1077	this when this is a problem.
		1078
		1079	The spelling of I<key> depends on your implementation of X. An easy way to
		1080	find a key name is to use the B<xev>(1) command. You can find a list by
		1081	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1030	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1082	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1031	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1083	value (B<0x0000 - 0xFFFF>).
1032	performed in an exact manner; however, the closest match is assured.
1033		1084
1034	I<string> may contain escape values (C<\a>: bell, C<\b>: backspace,	1085	As with any resource value, the I<action> string may contain backslash
1035	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,	1086	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1036	C<\000>: octal number) or verbatim control characters (C<^?>: delete,	1087	number), see RESOURCES in C<man 7 X> for further details.
1037	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it
1038	can start or end with whitespace. B<This feature is deprecated and will
1039	be removed>.
1040		1088
1041	Please note that you need to double the C<\> in resource files, as	1089	An action starts with an action prefix that selects a certain type
1042	Xlib itself does its own de-escaping (you can use C<\033> instead of	1090	of action, followed by a colon. An action string without colons is
1043	C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own	1091	interpreted as a literal string to pass to the tty (as if it was
1044	processing).	1092	prefixed with C<string:>).
1045		1093
1046	You can define a range of keysyms in one shot by providing a I<string>	1094	The following action prefixes are known - extensions can provide
1047	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1095	additional prefixes:
1048	should be a character not used by the strings.
1049		1096
1050	Its usage can be demonstrated by an example:	1097	=over 4
1051		1098
1052	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1099	=item string:STRING
1053		1100
1054	The above line is equivalent to the following three lines:	1101	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1102	then the remaining C<STRING> will be passed to the program running in the
		1103	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1104	string C<echo rm -rf /> followed by a newline:
1055		1105
1056	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1106	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1057	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>
1058	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>
1059		1107
		1108	This could in theory be used to completely redefine your keymap.
		1109
		1110	=item command:STRING
		1111
1060	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1112	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1061	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1113	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1114	the opposite of C<string:> - instead of sending it to the program running
		1115	in the terminal, it will be treated as if it were program output). This is
		1116	most useful to feed command sequences into @@RXVT_NAME@@.
		1117
1062	example the following means "change the current locale to C<zh_CN.GBK>	1118	For example the following means "change the current locale to C<zh_CN.GBK>
1063	when Control-Meta-c is being pressed":	1119	when Control-Meta-c is being pressed":
1064		1120
1065	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1121	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1066		1122
1067	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1123	The following example will map Control-Meta-1 and Control-Meta-2 to
1068	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1124	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1069	manpage. For example, the F<selection> extension (activated via	1125	font-switching at runtime:
1070	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1071		1126
1072	URxvt.keysym.M-C-c: perl:selection:rot13	1127	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1128	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1073		1129
1074	Due the the large number of modifier combinations, a defined key mapping	1130	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1075	will match if at I<at least> the specified identifiers are being set, and	1131	info):
1076	no other key mappings with those and more bits are being defined. That
1077	means that defining a key map for C<a> will automatically provide
1078	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1079	mappings themselves.
1080		1132
1081	Unfortunately, this will override built-in key mappings. For example	1133	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1134	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1135
		1136	=item builtin:
		1137
		1138	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1139	key binding existed for the key combination. The obvious use is to undo
		1140	the effect of existing bindings. The not so obvious use is to reinstate
		1141	bindings when another binding overrides too many modifiers.
		1142
1082	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1143	For example if you overwrite the C<Insert> key you will disable
1083	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1144	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1084	user-defined keymap using the C<builtin:> replacement:	1145	"holes" into the user-defined keymap using the C<builtin:> replacement:
1085		1146
1086	URxvt.keysym.Insert: <my insert key sequence>	1147	URxvt.keysym.Insert: <my insert key sequence>
1087	URxvt.keysym.S-Insert: builtin:	1148	URxvt.keysym.S-Insert: builtin:
1088		1149
1089	The first line defines a mapping for C<Insert> and I<any> combination	1150	The first line defines a mapping for C<Insert> and I<any> combination
1090	of modifiers. The second line re-establishes the default mapping for	1151	of modifiers. The second line re-establishes the default mapping for
1091	C<Shift-Insert>.	1152	C<Shift-Insert>.
1092		1153
1093	The following example will map Control-Meta-1 and Control-Meta-2 to	1154	=item builtin-string:
1094	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1095	font-switching at runtime:
1096		1155
1097	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1156	This action is mainly useful to restore string mappings for keys that
1098	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1157	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1158	difficult to explain - basically, this action will send the string to the
		1159	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1160	action for it.
1099		1161
1100	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1162	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1101	info):	1163	selection when you press C<Shift-Insert>. With the following bindings, it
		1164	would instead emit the (undocumented, but what applications running in the
		1165	terminal might expect) sequence C<ESC [ 2 $> instead:
1102		1166
1103	URxvt.keysym.M-C-3: command:\033[8;25;80t	1167	URxvt.keysym.S-Insert: builtin-string:
1104	URxvt.keysym.M-C-4: command:\033[8;48;110t	1168	URxvt.keysym.C-S-Insert: builtin:
		1169
		1170	The first line disables the paste functionality for that key
		1171	combination, and the second reinstates the default behaviour for
		1172	C<Control-Shift-Insert>, which would otherwise be overridden.
		1173
		1174	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1175	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1176	this:
		1177
		1178	URxvt.keysym.C-S-c: builtin-string:
		1179	URxvt.keysym.C-S-v: builtin-string:
		1180
		1181	=item EXTENSION:STRING
		1182
		1183	An action of this form passes the B<STRING> to the @@RXVT_NAME@@perl(3)
		1184	extension of the same name. The extension will be loaded automatically if
		1185	neccessary.
		1186
		1187	Not all extensions define key actions, but popular extensions that do
		1188	include the I<selection> and I<matcher> extensions (documented in their
		1189	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1190	respectively).
		1191
		1192	From the silly examples department, this will rot13-"encrypt"
		1193	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1194	keyboards:
		1195
		1196	URxvt.keysym.M-C-c: selection:rot13
		1197
		1198	=item perl:STRING DEPRECATED
		1199
		1200	This is a deprecated way of passing key mappings to perl extensions. It is
		1201	still supported, but should not be used anymore.
		1202
		1203	=back
1105		1204
1106	=item B<perl-ext-common>: I<string>	1205	=item B<perl-ext-common>: I<string>
1107		1206
1108	=item B<perl-ext>: I<string>	1207	=item B<perl-ext>: I<string>
1109		1208
…		…
1111	use in this terminal instance; option B<-pe>.	1210	use in this terminal instance; option B<-pe>.
1112		1211
1113	Extension names can be prefixed with a C<-> sign to prohibit using	1212	Extension names can be prefixed with a C<-> sign to prohibit using
1114	them. This can be useful to selectively disable some extensions loaded	1213	them. This can be useful to selectively disable some extensions loaded
1115	by default, or specified via the C<perl-ext-common> resource. For	1214	by default, or specified via the C<perl-ext-common> resource. For
1116	example, C<default,-selection> will use all the default extension except	1215	example, C<default,-selection> will use all the default extensions except
1117	C<selection>.	1216	C<selection>.
1118		1217
1119	Extension names can also be followed by an argument in angle brackets	1218	The default set includes the C<selection>, C<option-popup>,
1120	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1219	C<selection-popup> and C<readline> extensions, any extensions that define
1121	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1220	keybindings via C<BINDING> meta comments, extensions loaded because
1122	multiple times with different arguments will pass multiple arguments to	1221	their resources/commandline switches were used, and extensions which are
1123	the extension.	1222	mentioned in B<keysym> resources.
1124		1223
1125	Each extension is looked up in the library directories, loaded if	1224	Each extension is looked up in the library directories, loaded if
1126	necessary, and bound to the current terminal instance.	1225	necessary, and bound to the current terminal instance. When the library
		1226	search path contains multiple extension files of the same name, then the
		1227	first one found will be used.
1127		1228
1128	If both of these resources are the empty string, then the perl	1229	If both of these resources are the empty string, then the perl interpreter
1129	interpreter will not be initialized. The idea behind two options is that	1230	will not be initialized. The rationale for having two options is that
1130	B<perl-ext-common> will be used for extensions that should be available to	1231	B<perl-ext-common> will be used for extensions that should be available to
1131	all instances, while B<perl-ext> is used for specific instances.	1232	all instances, while B<perl-ext> is used for specific instances.
1132		1233
1133	=item B<perl-eval>: I<string>	1234	=item B<perl-eval>: I<string>
1134		1235
1135	Perl code to be evaluated when all extensions have been registered. See	1236	Perl code to be evaluated when all extensions have been registered. See
1136	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1237	the @@RXVT_NAME@@perl(3) manpage.
1137	will be ignored when running setuid/setgid.
1138		1238
1139	=item B<perl-lib>: I<path>	1239	=item B<perl-lib>: I<path>
1140		1240
1141	Colon-separated list of additional directories that hold extension	1241	Colon-separated list of additional directories that hold extension
1142	scripts. When looking for extensions specified by the C<perl> resource,	1242	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1143	@@RXVT_NAME@@ will first look in these directories and then in	1243	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1144	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1244	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1145	will be ignored when running setuid/setgid.
1146		1245
1147	See the @@RXVT_NAME@@perl(3) manpage.	1246	See the @@RXVT_NAME@@perl(3) manpage.
1148		1247
1149	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1248	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1150		1249
…		…
1154	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1253	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1155		1254
1156	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1255	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1157	for details.	1256	for details.
1158		1257
1159	=item B<searchable-scrollback:> I<keysym>	1258	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1160		1259
1161	Sets the hotkey that starts the incremental scrollback buffer search	1260	This resource is deprecated and will be removed. Use a B<keysym> resource
1162	(default: C<M-s>).	1261	instead, e.g.:
1163		1262
		1263	URxvt.keysym.M-s: searchable-scrollback:start
		1264
1164	=item B<urlLauncher>: I<string>	1265	=item B<url-launcher>: I<string>
1165		1266
1166	Specifies the program to be started with a URL argument. Used by the	1267	Specifies the program to be started with a URL argument. Used by the
1167	C<selection-popup> and C<matcher> perl extensions.	1268	C<selection-popup> and C<matcher> perl extensions.
1168		1269
1169	=item B<transient-for>: I<windowid>	1270	=item B<transient-for>: I<windowid>
…		…
1172		1273
1173	=item B<override-redirect>: I<boolean>	1274	=item B<override-redirect>: I<boolean>
1174		1275
1175	Compile I<frills>: Sets override-redirect for the terminal window, making	1276	Compile I<frills>: Sets override-redirect for the terminal window, making
1176	it almost invisible to window managers; option B<-override-redirect>.	1277	it almost invisible to window managers; option B<-override-redirect>.
		1278
		1279	=item B<iso14755:> I<boolean>
		1280
		1281	Turn on/off ISO 14755 (default enabled).
		1282
		1283	=item B<iso14755_52:> I<boolean>
		1284
		1285	Turn on/off ISO 14755 5.2 mode (default enabled).
		1286
		1287	=back
		1288
		1289	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1290
		1291	=over 4
		1292
		1293	=item B<-pixmap> I<file[;oplist]>
		1294
		1295	=item B<backgroundPixmap:> I<file[;oplist]>
		1296
		1297	Compile I<pixbuf>: Use the specified image file as the window's
		1298	background and also optionally specify a colon separated list of
		1299	operations to modify it. Note that you may need to quote the C<;>
		1300	character when using the command line option, as C<;> is usually a
		1301	metacharacter in shells. Supported operations are:
		1302
		1303	=over 4
		1304
		1305	=item B<WxH+X+Y>
		1306
		1307	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1308	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1309	scale of 0 disables scaling.
		1310
		1311	=item B<op=tile>
		1312
		1313	enables tiling
		1314
		1315	=item B<op=keep-aspect>
		1316
		1317	maintain the image aspect ratio when scaling
		1318
		1319	=item B<op=root-align>
		1320
		1321	use the position of the terminal window relative to the root window as
		1322	the image offset, simulating a root window background
		1323
		1324	=back
		1325
		1326	The default scale and position setting is C<100x100+50+50>.
		1327	Alternatively, a predefined set of templates can be used to achieve
		1328	the most common setups:
		1329
		1330	=over 4
		1331
		1332	=item B<style=tiled>
		1333
		1334	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1335
		1336	=item B<style=aspect-stretched>
		1337
		1338	the image is scaled to fill the whole window maintaining the aspect
		1339	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1340
		1341	=item B<style=stretched>
		1342
		1343	the image is scaled to fill the whole window. Equivalent to 100x100
		1344
		1345	=item B<style=centered>
		1346
		1347	the image is centered with no scaling. Equivalent to 0x0+50+50
		1348
		1349	=item B<style=root-tiled>
		1350
		1351	the image is tiled with no scaling and using 'root' positioning.
		1352	Equivalent to 0x0:op=tile:op=root-align
		1353
		1354	=back
		1355
		1356	If multiple templates are specified the last one wins. Note that a
		1357	template overrides all the scale, position and operations settings.
		1358
		1359	If used in conjunction with pseudo-transparency, the specified pixmap
		1360	will be blended over the transparent background using alpha-blending.
		1361
		1362	=item B<-tr>\|B<+tr>
		1363
		1364	=item B<transparent:> I<boolean>
		1365
		1366	Turn on/off pseudo-transparency by using the root pixmap as background.
		1367
		1368	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1369	will be removed in future versions.
		1370
		1371	=item B<-tint> I<colour>
		1372
		1373	=item B<tintColor:> I<colour>
		1374
		1375	Tint the transparent background with the given colour. Note that a
		1376	black tint yields a completely black image while a white tint yields
		1377	the image unchanged.
		1378
		1379	=item B<-sh> I<number>
		1380
		1381	=item B<shading:> I<number>
		1382
		1383	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1384	A value of 100 means no shading.
		1385
		1386	=item B<-blr> I<HxV>
		1387
		1388	=item B<blurRadius:> I<HxV>
		1389
		1390	Apply gaussian blur with the specified radius to the transparent
		1391	background. If a single number is specified, the vertical and
		1392	horizontal radii are considered to be the same. Setting one of the
		1393	radii to 1 and the other to a large number creates interesting effects
		1394	on some backgrounds. The maximum radius value is 128. An horizontal or
		1395	vertical radius of 0 disables blurring.
		1396
		1397	=item B<path:> I<path>
		1398
		1399	Specify the colon-delimited search path for finding background image files.
1177		1400
1178	=back	1401	=back
1179		1402
1180	=head1 THE SCROLLBAR	1403	=head1 THE SCROLLBAR
1181		1404
…		…
1230	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1453	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1231		1454
1232	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1455	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1233	inserted too.	1456	inserted too.
1234		1457
		1458	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1459	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1460	binding causes the value of the internal selection to be copied to the
		1461	CLIPBOARD selection, while the second binding causes the value of the
		1462	CLIPBOARD selection to be inserted.
		1463
1235	=back	1464	=back
1236		1465
1237	=head1 CHANGING FONTS	1466	=head1 CHANGING FONTS
1238		1467
1239	Changing fonts (or font sizes, respectively) via the keypad is not yet	1468	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1252		1481
1253	=head1 ISO 14755 SUPPORT	1482	=head1 ISO 14755 SUPPORT
1254		1483
1255	ISO 14755 is a standard for entering and viewing unicode characters	1484	ISO 14755 is a standard for entering and viewing unicode characters
1256	and character codes using the keyboard. It consists of 4 parts. The	1485	and character codes using the keyboard. It consists of 4 parts. The
1257	first part is available rxvt-unicode has been compiled with	1486	first part is available if rxvt-unicode has been compiled with
1258	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1487	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1259	with C<--enable-iso14755>.	1488	with C<--enable-iso14755>.
1260		1489
1261	=over 4	1490	=over 4
1262		1491
…		…
1320	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1549	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1321	it can be seen via the I<who(1)> command, and can accept messages. To	1550	it can be seen via the I<who(1)> command, and can accept messages. To
1322	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1551	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1323	on some systems or setgid to root or to some other group on others.	1552	on some systems or setgid to root or to some other group on others.
1324		1553
1325	=head1 COLORS AND GRAPHICS	1554	=head1 COLOURS AND GRAPHICS
1326		1555
1327	In addition to the default foreground and background colours,	1556	In addition to the default foreground and background colours,
1328	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1557	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1329	high-intensity bold/blink versions of the same). Here is a list of the	1558	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1330	colours with their names.	1559	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1560	cube plus a 8 (24) colour greyscale ramp.
		1561
		1562	Here is a list of the ANSI colours with their names.
1331		1563
1332	=begin table	1564	=begin table
1333		1565
1334	B<color0> (black) = Black	1566	B<color0> (black) = Black
1335	B<color1> (red) = Red3	1567	B<color1> (red) = Red3
…		…
1355	It is also possible to specify the colour values of B<foreground>,	1587	It is also possible to specify the colour values of B<foreground>,
1356	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1588	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1357	a number 0-15, as a convenient shorthand to reference the colour name of	1589	a number 0-15, as a convenient shorthand to reference the colour name of
1358	color0-color15.	1590	color0-color15.
1359		1591
1360	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1592	The following text gives values for the standard 88 colour mode (and
1361	additional 72 colours. The first 64 of those (with indices 16 to 79)	1593	values for the 256 colour mode in parentheses).
1362	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1363	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1364		1594
		1595	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1596
		1597	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1598	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1599
		1600	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1601	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1602	the RGB cube.
		1603
1365	Together, all those colours implement the 88 colour xterm colours. Only	1604	Together, all those colours implement the 88 (256) colour xterm
1366	the first 16 can be changed using resources currently, the rest can only	1605	colours. Only the first 16 can be changed using resources currently, the
1367	be changed via command sequences ("escape codes").	1606	rest can only be changed via command sequences ("escape codes").
		1607
		1608	Applications are advised to use terminfo or command sequences to discover
		1609	number and RGB values of all colours (yes, you can query this...).
1368		1610
1369	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1611	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1370	always swapping the foreground/background colours. This is in contrast to	1612	always swapping the foreground/background colours. This is in contrast to
1371	I<xterm>(1) where the colours are only swapped if they have not otherwise	1613	I<xterm>(1) where the colours are only swapped if they have not otherwise
1372	been specified. For example,	1614	been specified. For example,
1373		1615
1374	=over 4
1375
1376	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1616	@@RXVT_NAME@@ -fg Black -bg White -rv
1377		1617
1378	would yield White on Black, while on I<xterm>(1) it would yield Black	1618	would yield White on Black, while on I<xterm>(1) it would yield Black on
1379	on White.	1619	White.
1380
1381	=back
1382		1620
1383	=head2 ALPHA CHANNEL SUPPORT	1621	=head2 ALPHA CHANNEL SUPPORT
1384		1622
1385	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1623	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1386	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1624	their act together, rxvt-unicode will do its own alpha channel management:
1387	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1625
1388	in addition to the ones provided by X, where the additional A component	1626	You can prefix any colour with an opaqueness percentage enclosed in
		1627	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1628	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1629	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1630	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1631	is the recommended format to specify transparency values, and works with
		1632	all ways to specify a colour.
		1633
		1634	For complete control, rxvt-unicode also supports
		1635	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1636	specifications, where the additional C<aaaa> component specifies opacity
1389	specifies opacity (alpha) values. The minimum value of C<0> is completely	1637	(alpha) values. The minimum value of C<0000> is completely transparent,
1390	transparent). You can also prefix any color with C<[percent]>, where	1638	while C<ffff> is completely opaque). The two example colours from
1391	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1639	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1392	the color, where C<0> is completely transparent and C<100> is completelxy	1640	C<rgba:0000/ff00/0000/f332>.
1393	opaque.
1394		1641
1395	You probably need to specify B<"-depth 32">, too, and have the luck that	1642	You probably need to specify B<"-depth 32">, too, to force a visual with
1396	your X-server uses ARGB pixel layout, as X is far from just supporting	1643	alpha channels, and have the luck that your X-server uses ARGB pixel
1397	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1644	layout, as X is far from just supporting ARGB visuals out of the box, and
		1645	rxvt-unicode just fudges around.
1398		1646
1399	For example, the following selects an almost completely transparent red	1647	For example, the following selects an almost completely transparent black
1400	background, and an almost opaque pink foreground:	1648	background, and an almost opaque pink foreground:
1401		1649
1402	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1650	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1403		1651
1404	I<Please note that transparency of any kind if completely unsupported by	1652	When not using a background image, then the interpretation of the
1405	the author. Don't bug him with installation questions!>	1653	alpha channel is up to your compositing manager (most interpret it as
		1654	transparency of course).
		1655
		1656	When using a background pixmap or pseudo-transparency, then the background
		1657	colour will always behave as if it were completely transparent (so the
		1658	background image shows instead), regardless of how it was specified, while
		1659	other colours will either be transparent as specified (the background
		1660	image will show through) on servers supporting the RENDER extension, or
		1661	fully opaque on servers not supporting the RENDER EXTENSION.
		1662
		1663	Please note that due to bugs in Xft, specifying alpha values might result
		1664	in garbage being displayed when the X-server does not support the RENDER
		1665	extension.
1406		1666
1407	=head1 ENVIRONMENT	1667	=head1 ENVIRONMENT
1408		1668
1409	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1669	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1410		1670
…		…
1416	resources or on the command line.	1676	resources or on the command line.
1417		1677
1418	=item B<COLORTERM>	1678	=item B<COLORTERM>
1419		1679
1420	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was	1680	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was
1421	compiled with XPM support, and optionally with the added extension	1681	compiled with background image support, and optionally with the added
1422	C<-mono> to indicate that rxvt-unicode runs on a monochrome screen.	1682	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome
		1683	screen.
1423		1684
1424	=item B<COLORFGBG>	1685	=item B<COLORFGBG>
1425		1686
1426	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is	1687	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
1427	the colour code used as default foreground/text colour (or the string	1688	the colour code used as default foreground/text colour (or the string
1428	C<default> to indicate that the default-colour escape sequence is to be	1689	C<default> to indicate that the default-colour escape sequence is to be
1429	used), C<bg> is the colour code used as default background colour (or the	1690	used), C<bg> is the colour code used as default background colour (or the
1430	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@	1691	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
1431	was compiled with XPM support. Libraries like C<ncurses> and C<slang> can	1692	was compiled with background image support. Libraries like C<ncurses>
1432	(and do) use this information to optimize screen output.	1693	and C<slang> can (and do) use this information to optimize screen output.
1433		1694
1434	=item B<WINDOWID>	1695	=item B<WINDOWID>
1435		1696
1436	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel	1697	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
1437	window, which usually has subwindows for the scrollbar, the terminal	1698	window, which usually has subwindows for the scrollbar, the terminal
…		…
1443	C<--with-terminfo=PATH>.	1704	C<--with-terminfo=PATH>.
1444		1705
1445	=item B<DISPLAY>	1706	=item B<DISPLAY>
1446		1707
1447	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1708	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1448	display in its child processes.	1709	display in its child processes if C<-display> isn't used to override. It
		1710	defaults to C<:0> if it doesn't exist.
1449		1711
1450	=item B<SHELL>	1712	=item B<SHELL>
1451		1713
1452	The shell to be used for command execution, defaults to C</bin/sh>.	1714	The shell to be used for command execution, defaults to C</bin/sh>.
1453		1715
1454	=item B<RXVT_SOCKET>	1716	=item B<RXVT_SOCKET> [I<sic>]
1455		1717
1456	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1718	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1457	@@RXVT_NAME@@d(1).	1719	@@RXVT_NAME@@d(1).
1458		1720
1459	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1721	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1722
		1723	=item B<URXVT_PERL_LIB>
		1724
		1725	Additional F<:>-separated library search path for perl extensions. Will be
		1726	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1727	directory.
		1728
		1729	=item B<URXVT_PERL_VERBOSITY>
		1730
		1731	See L<@@RXVT_NAME@@perl>(3).
1460		1732
1461	=item B<HOME>	1733	=item B<HOME>
1462		1734
1463	Used to locate the default directory for the unix domain socket for	1735	Used to locate the default directory for the unix domain socket for
1464	daemon communications and to locate various resource files (such as	1736	daemon communications and to locate various resource files (such as
1465	C<.Xdefaults>)	1737	C<.Xdefaults>)
1466		1738
1467	=item B<XAPPLRESDIR>	1739	=item B<XAPPLRESDIR>
1468		1740
1469	Directory where various X resource files are being located.	1741	Directory where application-specific X resource files are located.
1470		1742
1471	=item B<XENVIRONMENT>	1743	=item B<XENVIRONMENT>
1472		1744
1473	If set and accessible, gives the name of a X resource file to be loaded by	1745	If set and accessible, gives the name of a X resource file to be loaded by
1474	@@RXVT_NAME@@.	1746	@@RXVT_NAME@@.
…		…
1479		1751
1480	=over 4	1752	=over 4
1481		1753
1482	=item B</usr/lib/X11/rgb.txt>	1754	=item B</usr/lib/X11/rgb.txt>
1483		1755
1484	Color names.	1756	Colour names.
1485		1757
1486	=back	1758	=back
1487		1759
1488	=head1 SEE ALSO	1760	=head1 SEE ALSO
1489		1761
		1762	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1490	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1763	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1491		1764
1492	=head1 CURRENT PROJECT COORDINATOR	1765	=head1 CURRENT PROJECT COORDINATOR
1493		1766
1494	=over 4	1767	=over 4
1495		1768
1496	=item Project Coordinator	1769	=item Project Coordinator
1497		1770
1498	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1771	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1499		1772
1500	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1773	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1501		1774
1502	=back	1775	=back
1503		1776
…		…
1507		1780
1508	=item John Bovey	1781	=item John Bovey
1509		1782
1510	University of Kent, 1992, wrote the original Xvt.	1783	University of Kent, 1992, wrote the original Xvt.
1511		1784
1512	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1785	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1513		1786
1514	very heavily modified Xvt and came up with Rxvt	1787	very heavily modified Xvt and came up with Rxvt
1515		1788
1516	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1789	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1517		1790
1518	wrote the Greek Keyboard Input (no longer in code)	1791	wrote the Greek Keyboard Input (no longer in code)
1519		1792
1520	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1793	=item mj olesen <olesen@me.QueensU.CA>
1521		1794
1522	Wrote the menu system.	1795	Wrote the menu system.
1523		1796
1524	Project Coordinator (changes.txt 2.11 to 2.21)	1797	Project Coordinator (changes.txt 2.11 to 2.21)
1525		1798
1526	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1799	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1527		1800
1528	Project Coordinator (changes.txt 2.21a to 2.4.5)	1801	Project Coordinator (changes.txt 2.21a to 2.4.5)
1529		1802
1530	=item Geoff Wing L<< <gcw@pobox.com> >>	1803	=item Geoff Wing <gcw@pobox.com>
1531		1804
1532	Rewrote screen display and text selection routines.	1805	Rewrote screen display and text selection routines.
1533		1806
1534	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1807	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1535		1808
1536	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1809	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1537		1810
1538	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1811	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1539	extension, random hacks, numerous bugfixes and extensions.	1812	extension, random hacks, numerous bugfixes and extensions.
1540		1813
1541	Project Coordinator (Changes 1.0 -)	1814	Project Coordinator (Changes 1.0 -)
1542		1815
1543	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1816	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1544		1817
1545	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1818	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1546		1819
1547	=back	1820	=back
1548		1821

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.129 by root, Mon May 28 20:34:56 2007 UTC vs. Revision 1.233 by sf-exg, Sat May 24 18:41:29 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.129 by root, Mon May 28 20:34:56 2007 UTC vs.
Revision 1.233 by sf-exg, Sat May 24 18:41:29 2014 UTC