… | |
… | |
12 | emulator intended as an I<xterm>(1) replacement for users who do not |
12 | emulator intended as an I<xterm>(1) replacement for users who do not |
13 | require features such as Tektronix 4014 emulation and toolkit-style |
13 | require features such as Tektronix 4014 emulation and toolkit-style |
14 | configurability. As a result, B<rxvt-unicode> uses much less swap space -- |
14 | configurability. As a result, B<rxvt-unicode> uses much less swap space -- |
15 | a significant advantage on a machine serving many X sessions. |
15 | a significant advantage on a machine serving many X sessions. |
16 | |
16 | |
17 | See also @@RXVT_NAME@@(7) for technical reference documentation (escape |
17 | This document is also available on the World-Wide-Web at |
18 | sequences etc.) and the FAQ section at the end of this document. |
18 | L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>. |
|
|
19 | |
|
|
20 | =head1 FREQUENTLY ASKED QUESTIONS |
|
|
21 | |
|
|
22 | See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of |
|
|
23 | frequently asked questions and answer to them and some common |
|
|
24 | problems. That document is also accessible on the World-Wide-Web at |
|
|
25 | L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>. |
|
|
26 | |
|
|
27 | =head1 RXVT-UNICODE VS. RXVT |
|
|
28 | |
|
|
29 | Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode |
|
|
30 | internally. That means it can store and display most scripts in the |
|
|
31 | world. Being a terminal emulator, however, some things are very difficult, |
|
|
32 | especially cursive scripts such as arabic, vertically written scripts |
|
|
33 | like mongolian or scripts requiring extremely complex combining rules, |
|
|
34 | like tibetan or devanagari. Don't expect pretty output when using these |
|
|
35 | scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work |
|
|
36 | fine, though. A somewhat difficult case are right-to-left scripts, such |
|
|
37 | as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms |
|
|
38 | belong in the application, not the terminal emulator (too many things -- |
|
|
39 | such as cursor-movement while editing -- break otherwise), but that might |
|
|
40 | change. |
|
|
41 | |
|
|
42 | If you are looking for a terminal that supports more exotic scripts, let |
|
|
43 | me recommend C<mlterm>, which is a very user friendly, lean and clean |
|
|
44 | terminal emulator. In fact, the reason rxvt-unicode was born was solely |
|
|
45 | because the author couldn't get C<mlterm> to use one font for latin1 and |
|
|
46 | another for japanese. |
|
|
47 | |
|
|
48 | Therefore another design rationale was the use of multiple fonts to |
|
|
49 | display characters: The idea of a single unicode font which many other |
|
|
50 | programs force onto its users never made sense to me: You should be able |
|
|
51 | to choose any font for any script freely. |
|
|
52 | |
|
|
53 | Apart from that, rxvt-unicode is also much better internationalised than |
|
|
54 | its predecessor, supports things such as XFT and ISO 14755 that are handy |
|
|
55 | in i18n-environments, is faster, and has a lot bugs less than the original |
|
|
56 | rxvt. This all in addition to dozens of other small improvements. |
|
|
57 | |
|
|
58 | It is still faithfully following the original rxvt idea of being lean |
|
|
59 | and nice on resources: for example, you can still configure rxvt-unicode |
|
|
60 | without most of its features to get a lean binary. It also comes with |
|
|
61 | a client/daemon pair that lets you open any number of terminal windows |
|
|
62 | from within a single process, which makes startup time very fast and |
|
|
63 | drastically reduces memory usage. See @@RXVT_NAME@@d(1) (daemon) and |
|
|
64 | @@RXVT_NAME@@c(1) (client). |
|
|
65 | |
|
|
66 | It also makes technical information about escape sequences (which have |
|
|
67 | been extended) more accessible: see @@RXVT_NAME@@(7) for technical |
|
|
68 | reference documentation (escape sequences etc.). |
19 | |
69 | |
20 | =head1 OPTIONS |
70 | =head1 OPTIONS |
21 | |
71 | |
22 | The B<@@RXVT_NAME@@> options (mostly a subset of I<xterm>'s) are listed |
72 | The B<@@RXVT_NAME@@> options (mostly a subset of I<xterm>'s) are listed |
23 | below. In keeping with the smaller-is-better philosophy, options may be |
73 | below. In keeping with the smaller-is-better philosophy, options may be |
… | |
… | |
42 | |
92 | |
43 | Print out a message describing available options. |
93 | Print out a message describing available options. |
44 | |
94 | |
45 | =item B<-display> I<displayname> |
95 | =item B<-display> I<displayname> |
46 | |
96 | |
47 | Attempt to open a window on the named X display (B<-d> still |
97 | Attempt to open a window on the named X display (the older form B<-d> |
48 | respected). In the absence of this option, the display specified by the |
98 | is still respected. but deprecated). In the absence of this option, the |
49 | B<DISPLAY> environment variable is used. |
99 | display specified by the B<DISPLAY> environment variable is used. |
|
|
100 | |
|
|
101 | =item B<-depth> I<bitdepth> |
|
|
102 | |
|
|
103 | Compile I<frills>: Attempt to find a visual with the given bit depth; |
|
|
104 | resource B<depth>. |
|
|
105 | |
|
|
106 | [Please note that many X servers (and libXft) are buggy with |
|
|
107 | respect to C<-depth 32> and/or alpha channels, and will cause all sorts |
|
|
108 | of graphical corruption. This is harmless, but we can't do anything about |
|
|
109 | this, so watch out] |
|
|
110 | |
|
|
111 | =item B<-visual> I<visualID> |
|
|
112 | |
|
|
113 | Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for possible |
|
|
114 | visual ids). |
50 | |
115 | |
51 | =item B<-geometry> I<geom> |
116 | =item B<-geometry> I<geom> |
52 | |
117 | |
53 | Window geometry (B<-g> still respected); resource B<geometry>. |
118 | Window geometry (B<-g> still respected); resource B<geometry>. |
54 | |
119 | |
… | |
… | |
56 | |
121 | |
57 | Turn on/off simulated reverse video; resource B<reverseVideo>. |
122 | Turn on/off simulated reverse video; resource B<reverseVideo>. |
58 | |
123 | |
59 | =item B<-j>|B<+j> |
124 | =item B<-j>|B<+j> |
60 | |
125 | |
61 | Turn on/off jump scrolling; resource B<jumpScroll>. |
126 | Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. |
62 | |
127 | |
63 | =item B<-ip>|B<+ip> |
128 | =item B<-ss>|B<+ss> |
64 | |
129 | |
65 | Turn on/off inheriting parent window's pixmap. Alternative form is |
130 | Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. |
66 | B<-tr>; resource B<inheritPixmap>. |
|
|
67 | |
131 | |
68 | =item B<-fade> I<number> |
132 | =item B<-fade> I<number> |
69 | |
133 | |
70 | Fade the text by the given percentage when focus is lost. |
134 | Fade the text by the given percentage when focus is lost. Small values |
|
|
135 | fade a little only, 100 completely replaces all colours by the fade |
|
|
136 | colour; resource B<fading>. |
71 | |
137 | |
72 | =item B<-tint> I<colour> |
138 | =item B<-fadecolor> I<colour> |
73 | |
139 | |
74 | Tint the transparent background pixmap with the given colour when |
140 | Fade to this colour when fading is used (see B<-fade>). The default colour |
75 | transparency is enabled with B<-tr> or B<-ip>. See also the B<-sh> |
141 | is opaque black. resource B<fadeColor>. |
76 | option that can be used to brighten or darken the image in addition to |
|
|
77 | tinting it. |
|
|
78 | |
142 | |
79 | =item B<-sh> |
143 | =item B<-icon> I<file> |
80 | |
144 | |
81 | I<number> Darken (0 .. 100) or lighten (-1 .. -100) the transparent |
145 | Compile I<pixbuf>: Use the specified image as application icon. This |
82 | background image in addition to tinting it (i.e. B<-tint> must be |
146 | is used by many window managers, taskbars and pagers to represent the |
83 | specified, too). |
147 | application window; resource I<iconFile>. |
84 | |
148 | |
85 | =item B<-bg> I<colour> |
149 | =item B<-bg> I<colour> |
86 | |
150 | |
87 | Window background colour; resource B<background>. |
151 | Window background colour; resource B<background>. |
88 | |
152 | |
89 | =item B<-fg> I<colour> |
153 | =item B<-fg> I<colour> |
90 | |
154 | |
91 | Window foreground colour; resource B<foreground>. |
155 | Window foreground colour; resource B<foreground>. |
92 | |
156 | |
93 | =item B<-pixmap> I<file[;geom]> |
|
|
94 | |
|
|
95 | Compile I<XPM>: Specify XPM file for the background and also optionally |
|
|
96 | specify its scaling with a geometry string. Note you may need to add |
|
|
97 | quotes to avoid special shell interpretation of the `;' in the |
|
|
98 | command-line; resource B<backgroundPixmap>. |
|
|
99 | |
|
|
100 | =item B<-cr> I<colour> |
157 | =item B<-cr> I<colour> |
101 | |
158 | |
102 | The cursor colour; resource B<cursorColor>. |
159 | The cursor colour; resource B<cursorColor>. |
103 | |
160 | |
104 | =item B<-pr> I<colour> |
161 | =item B<-pr> I<colour> |
… | |
… | |
109 | |
166 | |
110 | The mouse pointer background colour; resource B<pointerColor2>. |
167 | The mouse pointer background colour; resource B<pointerColor2>. |
111 | |
168 | |
112 | =item B<-bd> I<colour> |
169 | =item B<-bd> I<colour> |
113 | |
170 | |
114 | The colour of the border between the xterm scrollbar and the text; |
171 | The colour of the border around the text area and between the scrollbar and the text; |
115 | resource B<borderColor>. |
172 | resource B<borderColor>. |
116 | |
173 | |
117 | =item B<-fn> I<fontname> |
174 | =item B<-fn> I<fontlist> |
118 | |
175 | |
119 | Select the fonts to be used. This is a comma seperated list of font |
176 | Select the fonts to be used. This is a comma separated list of font names |
120 | names that are used in turn when trying to display Unicode characters. |
177 | that are checked in order when trying to find glyphs for characters. The |
121 | The first font defines the cell size for characters; other fonts might |
178 | first font defines the cell size for characters; other fonts might be |
122 | be smaller, but not larger. A reasonable default font list is always |
179 | smaller, but not (in general) larger. A (hopefully) reasonable default |
123 | appended to it. resource B<font>. |
180 | font list is always appended to it. See resource B<font> for more details. |
124 | |
181 | |
|
|
182 | In short, to specify an X11 core font, just specify its name or prefix it |
|
|
183 | with C<x:>. To specify an XFT-font, you need to prefix it with C<xft:>, |
|
|
184 | e.g.: |
|
|
185 | |
|
|
186 | @@RXVT_NAME@@ -fn "xft:Bitstream Vera Sans Mono:pixelsize=15" |
|
|
187 | @@RXVT_NAME@@ -fn "9x15bold,xft:Bitstream Vera Sans Mono" |
|
|
188 | |
|
|
189 | See also the question "How does rxvt-unicode choose fonts?" in the FAQ |
|
|
190 | section of @@RXVT_NAME@@(7). |
|
|
191 | |
|
|
192 | =item B<-fb> I<fontlist> |
|
|
193 | |
|
|
194 | Compile I<font-styles>: The bold font list to use when B<bold> characters |
|
|
195 | are to be printed. See resource B<boldFont> for details. |
|
|
196 | |
|
|
197 | =item B<-fi> I<fontlist> |
|
|
198 | |
|
|
199 | Compile I<font-styles>: The italic font list to use when I<italic> |
|
|
200 | characters are to be printed. See resource B<italicFont> for details. |
|
|
201 | |
|
|
202 | =item B<-fbi> I<fontlist> |
|
|
203 | |
|
|
204 | Compile I<font-styles>: The bold italic font list to use when B<< I<bold |
|
|
205 | italic> >> characters are to be printed. See resource B<boldItalicFont> |
|
|
206 | for details. |
|
|
207 | |
125 | =item B<-rb>|B<+rb> |
208 | =item B<-is>|B<+is> |
126 | |
209 | |
127 | Enable "real bold" support. When this option is on, bold text will be |
210 | Compile I<font-styles>: Bold/Blink font styles imply high intensity |
128 | displayed using the first available bold font in the font list. Bold |
211 | foreground/background (default). See resource B<intensityStyles> for |
129 | fonts should thus be specified in the font list after their |
212 | details. |
130 | corresponding regular fonts. If no bold font can be found, a regular |
|
|
131 | font will be used. resource B<realBold>. |
|
|
132 | |
213 | |
133 | =item B<-name> I<name> |
214 | =item B<-name> I<name> |
134 | |
215 | |
135 | Specify the application name under which resources are to be obtained, |
216 | Specify the application name under which resources are to be obtained, |
136 | rather than the default executable file name. Name should not contain |
217 | rather than the default executable file name. Name should not contain |
… | |
… | |
138 | |
219 | |
139 | =item B<-ls>|B<+ls> |
220 | =item B<-ls>|B<+ls> |
140 | |
221 | |
141 | Start as a login-shell/sub-shell; resource B<loginShell>. |
222 | Start as a login-shell/sub-shell; resource B<loginShell>. |
142 | |
223 | |
|
|
224 | =item B<-mc> I<milliseconds> |
|
|
225 | |
|
|
226 | Specify the maximum time between multi-click selections. |
|
|
227 | |
143 | =item B<-ut>|B<+ut> |
228 | =item B<-ut>|B<+ut> |
144 | |
229 | |
145 | Compile I<utmp>: Inhibit/enable writing a utmp entry; resource |
230 | Compile I<utmp>: Inhibit/enable writing a utmp entry; resource |
146 | B<utmpInhibit>. |
231 | B<utmpInhibit>. |
147 | |
232 | |
… | |
… | |
151 | B<visualBell>. |
236 | B<visualBell>. |
152 | |
237 | |
153 | =item B<-sb>|B<+sb> |
238 | =item B<-sb>|B<+sb> |
154 | |
239 | |
155 | Turn on/off scrollbar; resource B<scrollBar>. |
240 | Turn on/off scrollbar; resource B<scrollBar>. |
|
|
241 | |
|
|
242 | =item B<-sr>|B<+sr> |
|
|
243 | |
|
|
244 | Put scrollbar on right/left; resource B<scrollBar_right>. |
|
|
245 | |
|
|
246 | =item B<-st>|B<+st> |
|
|
247 | |
|
|
248 | Display rxvt (non XTerm/NeXT) scrollbar without/with a trough; |
|
|
249 | resource B<scrollBar_floating>. |
156 | |
250 | |
157 | =item B<-si>|B<+si> |
251 | =item B<-si>|B<+si> |
158 | |
252 | |
159 | Turn on/off scroll-to-bottom on TTY output inhibit; resource |
253 | Turn on/off scroll-to-bottom on TTY output inhibit; resource |
160 | B<scrollTtyOutput> has opposite effect. |
254 | B<scrollTtyOutput> has opposite effect. |
… | |
… | |
168 | |
262 | |
169 | Turn on/off scrolling with the scrollback buffer as new lines appear. |
263 | Turn on/off scrolling with the scrollback buffer as new lines appear. |
170 | This only takes effect if B<-si> is also given; resource |
264 | This only takes effect if B<-si> is also given; resource |
171 | B<scrollWithBuffer>. |
265 | B<scrollWithBuffer>. |
172 | |
266 | |
173 | =item B<-sr>|B<+sr> |
|
|
174 | |
|
|
175 | Put scrollbar on right/left; resource B<scrollBar_right>. |
|
|
176 | |
|
|
177 | =item B<-st>|B<+st> |
267 | =item B<-ptab>|B<+ptab> |
178 | |
268 | |
179 | Display normal (non XTerm/NeXT) scrollbar without/with a trough; |
269 | If enabled (default), "Horizontal Tab" characters are being stored as |
180 | resource B<scrollBar_floating>. |
270 | actual wide characters in the screen buffer, which makes it possible to |
|
|
271 | select and paste them. Since a horizontal tab is a cursor movement and |
|
|
272 | not an actual glyph, this can sometimes be visually annoying as the cursor |
|
|
273 | on a tab character is displayed as a wide cursor; resource B<pastableTabs>. |
181 | |
274 | |
182 | =item B<-bc>|B<+bc> |
275 | =item B<-bc>|B<+bc> |
183 | |
276 | |
184 | Blink the cursor; resource B<cursorBlink>. |
277 | Blink the cursor; resource B<cursorBlink>. |
|
|
278 | |
|
|
279 | =item B<-uc>|B<+uc> |
|
|
280 | |
|
|
281 | Make the cursor underlined; resource B<cursorUnderline>. |
185 | |
282 | |
186 | =item B<-iconic> |
283 | =item B<-iconic> |
187 | |
284 | |
188 | Start iconified, if the window manager supports that option. |
285 | Start iconified, if the window manager supports that option. |
189 | Alternative form is B<-ic>. |
286 | Alternative form is B<-ic>. |
… | |
… | |
206 | |
303 | |
207 | =item B<-bl> |
304 | =item B<-bl> |
208 | |
305 | |
209 | Compile I<frills>: Set MWM hints to request a borderless window, i.e. |
306 | Compile I<frills>: Set MWM hints to request a borderless window, i.e. |
210 | if honoured by the WM, the rxvt-unicode window will not have window |
307 | if honoured by the WM, the rxvt-unicode window will not have window |
211 | decorations; resource B<borderLess>. |
308 | decorations; resource B<borderLess>. If the window manager does not |
|
|
309 | support MWM hints (e.g. kwin), enables override-redirect mode. |
|
|
310 | |
|
|
311 | =item B<-override-redirect> |
|
|
312 | |
|
|
313 | Compile I<frills>: Sets override-redirect on the window; resource |
|
|
314 | B<override-redirect>. |
|
|
315 | |
|
|
316 | =item B<-dockapp> |
|
|
317 | |
|
|
318 | Sets the initial state of the window to WithdrawnState, which makes |
|
|
319 | window managers that support this extension treat it as a dockapp. |
|
|
320 | |
|
|
321 | =item B<-sbg> |
|
|
322 | |
|
|
323 | Compile I<frills>: Disable the usage of the built-in block graphics/line |
|
|
324 | drawing characters and just rely on what the specified fonts provide. Use |
|
|
325 | this if you have a good font and want to use its block graphic glyphs; |
|
|
326 | resource B<skipBuiltinGlyphs>. |
212 | |
327 | |
213 | =item B<-lsp> I<number> |
328 | =item B<-lsp> I<number> |
214 | |
329 | |
215 | Compile I<linespace>: Lines (pixel height) to insert between each row |
330 | Compile I<frills>: Lines (pixel height) to insert between each row of |
216 | of the display; resource B<linespace>. |
331 | the display. Useful to work around font rendering problems; resource |
|
|
332 | B<lineSpace>. |
|
|
333 | |
|
|
334 | =item B<-letsp> I<number> |
|
|
335 | |
|
|
336 | Compile I<frills>: Amount to adjust the computed character width by |
|
|
337 | to control overall letter spacing. Negative values will tighten up the |
|
|
338 | letter spacing, positive values will space letters out more. Useful to |
|
|
339 | work around odd font metrics; resource B<letterSpace>. |
217 | |
340 | |
218 | =item B<-tn> I<termname> |
341 | =item B<-tn> I<termname> |
219 | |
342 | |
220 | This option specifies the name of the terminal type to be set in the |
343 | This option specifies the name of the terminal type to be set in the |
221 | B<TERM> environment variable. This terminal type must exist in the |
344 | B<TERM> environment variable. This terminal type must exist in the |
… | |
… | |
230 | given on the command line. If this option is used, it must be the last |
353 | given on the command line. If this option is used, it must be the last |
231 | on the command-line. If there is no B<-e> option then the default is to |
354 | on the command-line. If there is no B<-e> option then the default is to |
232 | run the program specified by the B<SHELL> environment variable or, |
355 | run the program specified by the B<SHELL> environment variable or, |
233 | failing that, I<sh(1)>. |
356 | failing that, I<sh(1)>. |
234 | |
357 | |
|
|
358 | Please note that you must specify a program with arguments. If you want to |
|
|
359 | run shell commands, you have to specify the shell, like this: |
|
|
360 | |
|
|
361 | @@RXVT_NAME@@ -e sh -c "shell commands" |
|
|
362 | |
235 | =item B<-title> I<text> |
363 | =item B<-title> I<text> |
236 | |
364 | |
237 | Window title (B<-T> still respected); the default title is the basename |
365 | Window title (B<-T> still respected); the default title is the basename |
238 | of the program specified after the B<-e> option, if any, otherwise the |
366 | of the program specified after the B<-e> option, if any, otherwise the |
239 | application name; resource B<title>. |
367 | application name; resource B<title>. |
… | |
… | |
257 | |
385 | |
258 | Compile I<XIM>: input method name. resource B<inputMethod>. |
386 | Compile I<XIM>: input method name. resource B<inputMethod>. |
259 | |
387 | |
260 | =item B<-imlocale> I<string> |
388 | =item B<-imlocale> I<string> |
261 | |
389 | |
262 | The locale to use for opening the IM. You can use an LC_CTYPE of e.g. |
390 | The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g. |
263 | de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input |
391 | C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the |
264 | extension to be able to input japanese characters while staying in |
392 | input extension to be able to input japanese characters while staying in |
265 | another locale. |
393 | another locale. resource B<imLocale>. |
|
|
394 | |
|
|
395 | =item B<-imfont> I<fontset> |
|
|
396 | |
|
|
397 | Set the font set to use for the X Input Method, see resource B<imFont> |
|
|
398 | for more info. |
|
|
399 | |
|
|
400 | =item B<-tcw> |
|
|
401 | |
|
|
402 | Change the meaning of triple-click selection with the left mouse |
|
|
403 | button. Only effective when the original (non-perl) selection code is |
|
|
404 | in-use. Instead of selecting a full line it will extend the selection to |
|
|
405 | the end of the logical line only. resource B<tripleclickwords>. |
266 | |
406 | |
267 | =item B<-insecure> |
407 | =item B<-insecure> |
268 | |
408 | |
269 | Enable "insecure" mode, which currently enables most of the escape |
409 | Enable "insecure" mode, which currently enables most of the escape |
270 | sequences that echo strings. See the resource B<insecure> for more |
410 | sequences that echo strings. See the resource B<insecure> for more |
… | |
… | |
284 | =item B<-ssr>|B<+ssr> |
424 | =item B<-ssr>|B<+ssr> |
285 | |
425 | |
286 | Turn on/off secondary screen scroll (default enabled); resource |
426 | Turn on/off secondary screen scroll (default enabled); resource |
287 | B<secondaryScroll>. |
427 | B<secondaryScroll>. |
288 | |
428 | |
|
|
429 | =item B<-hold>|B<+hold> |
|
|
430 | |
|
|
431 | Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ |
|
|
432 | will not immediately destroy its window when the program executed within |
|
|
433 | it exits. Instead, it will wait till it is being killed or closed by the |
|
|
434 | user; resource B<hold>. |
|
|
435 | |
|
|
436 | =item B<-cd> I<path> |
|
|
437 | |
|
|
438 | Sets the working directory for the shell (or the command specified via |
|
|
439 | B<-e>). The I<path> must be an absolute path and it must exist for |
|
|
440 | @@RXVT_NAME@@ to start; resource B<chdir>. |
|
|
441 | |
289 | =item B<-xrm> I<resourcestring> |
442 | =item B<-xrm> I<string> |
290 | |
443 | |
291 | No effect on rxvt-unicode. Simply passes through an argument to be made |
444 | Works like the X Toolkit option of the same name, by adding the I<string> |
292 | available in the instance's argument list. Appears in I<WM_COMMAND> in |
445 | as if it were specified in a resource file. Resource values specified this |
293 | some window managers. |
446 | way take precedence over all other resource specifications. |
|
|
447 | |
|
|
448 | Note that you need to use the I<same> syntax as in the .Xdefaults file, |
|
|
449 | e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific |
|
|
450 | options can be specified as long-options on the commandline, so use |
|
|
451 | of B<-xrm> is mostly limited to cases where you want to specify other |
|
|
452 | resources (e.g. for input methods) or for compatibility with other |
|
|
453 | programs. |
|
|
454 | |
|
|
455 | =item B<-keysym.>I<sym> I<string> |
|
|
456 | |
|
|
457 | Remap a key symbol. See resource B<keysym>. |
|
|
458 | |
|
|
459 | =item B<-embed> I<windowid> |
|
|
460 | |
|
|
461 | Tells @@RXVT_NAME@@ to embed its windows into an already-existing window, |
|
|
462 | which enables applications to easily embed a terminal. |
|
|
463 | |
|
|
464 | Right now, @@RXVT_NAME@@ will first unmap/map the specified window, so it |
|
|
465 | shouldn't be a top-level window. @@RXVT_NAME@@ will also reconfigure it |
|
|
466 | quite a bit, so don't expect it to keep some specific state. It's best to |
|
|
467 | create an extra subwindow for @@RXVT_NAME@@ and leave it alone. |
|
|
468 | |
|
|
469 | The window will not be destroyed when @@RXVT_NAME@@ exits. |
|
|
470 | |
|
|
471 | It might be useful to know that @@RXVT_NAME@@ will not close file |
|
|
472 | descriptors passed to it (except for stdin/out/err, of course), so you |
|
|
473 | can use file descriptors to communicate with the programs within the |
|
|
474 | terminal. This works regardless of whether the C<-embed> option was used or |
|
|
475 | not. |
|
|
476 | |
|
|
477 | Here is a short Gtk2-perl snippet that illustrates how this option can be |
|
|
478 | used (a longer example is in F<doc/embed>): |
|
|
479 | |
|
|
480 | my $rxvt = new Gtk2::Socket; |
|
|
481 | $rxvt->signal_connect_after (realize => sub { |
|
|
482 | my $xid = $_[0]->window->get_xid; |
|
|
483 | system "@@RXVT_NAME@@ -embed $xid &"; |
|
|
484 | }); |
|
|
485 | |
|
|
486 | =item B<-pty-fd> I<file descriptor> |
|
|
487 | |
|
|
488 | Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty |
|
|
489 | pair but instead use the given file descriptor as the tty master. This is |
|
|
490 | useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator |
|
|
491 | without having to run a program within it. |
|
|
492 | |
|
|
493 | If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp |
|
|
494 | entries and will not tinker with pty/tty permissions - you have to do that |
|
|
495 | yourself if you want that. |
|
|
496 | |
|
|
497 | As an extremely special case, specifying C<-1> will completely suppress |
|
|
498 | pty/tty operations, which is probably only useful in conjunction with some |
|
|
499 | perl extension that manages the terminal. |
|
|
500 | |
|
|
501 | Here is a example in perl that illustrates how this option can be used (a |
|
|
502 | longer example is in F<doc/pty-fd>): |
|
|
503 | |
|
|
504 | use IO::Pty; |
|
|
505 | use Fcntl; |
|
|
506 | |
|
|
507 | my $pty = new IO::Pty; |
|
|
508 | fcntl $pty, F_SETFD, 0; # clear close-on-exec |
|
|
509 | system "@@RXVT_NAME@@ -pty-fd " . (fileno $pty) . "&"; |
|
|
510 | close $pty; |
|
|
511 | |
|
|
512 | # now communicate with rxvt |
|
|
513 | my $slave = $pty->slave; |
|
|
514 | while (<$slave>) { print $slave "got <$_>\n" } |
|
|
515 | |
|
|
516 | =item B<-pe> I<string> |
|
|
517 | |
|
|
518 | Comma-separated list of perl extension scripts to use (or not to use) in |
|
|
519 | this terminal instance. See resource B<perl-ext> for details. |
294 | |
520 | |
295 | =back |
521 | =back |
296 | |
522 | |
297 | =head1 RESOURCES (available also as long-options) |
523 | =head1 RESOURCES |
298 | |
524 | |
299 | Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long |
525 | Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long |
300 | options) compiled into your version. |
526 | options) compiled into your version. All resources are also available as |
|
|
527 | long-options. |
301 | |
528 | |
302 | There are two different methods that @@RXVT_NAME@@ can use to get the |
529 | You can set and change the resources using X11 tools like B<xrdb>. Many |
303 | Xresource data: using the X libraries (Xrm*-functions) or internal |
530 | distribution do also load settings from the B<~/.Xresources> file when X |
304 | Xresources reader (B<~/.Xdefaults>). For the first method (ie. |
531 | starts. @@RXVT_NAME@@ will consult the following files/resources in order, |
305 | B<@@RXVT_NAME@@ -h> lists B<XGetDefaults>), you can set and change the |
532 | with later settings overwriting earlier ones: |
306 | resources using X11 tools like B<xset>. Many distribution do also load |
|
|
307 | settings from the B<~/.Xresources> file when X starts. |
|
|
308 | |
533 | |
309 | If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h> |
534 | 1. app-defaults file in $XAPPLRESDIR |
310 | lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults |
535 | 2. $HOME/.Xdefaults |
311 | set in XAPPLOADDIR/URxvt (compile-time defined: usually |
536 | 3. RESOURCE_MANAGER property on root-window of screen 0 |
312 | B</usr/lib/X11/app-defaults/URxvt>) and resources set in |
537 | 4. SCREEN_RESOURCES property on root-window of the current screen |
313 | B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist. |
538 | 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename> |
|
|
539 | 6. resources specified via -xrm on the commandline |
|
|
540 | |
314 | Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two |
541 | Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class |
315 | class names: B<XTerm> and B<URxvt>. The class name B<Rxvt> allows |
542 | names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources |
316 | resources common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be |
543 | common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily |
317 | easily configured, while the class name B<URxvt> allows resources |
544 | configured, while the class name B<URxvt> allows resources unique to |
318 | unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be |
545 | B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@> |
319 | shared between different B<@@RXVT_NAME@@> configurations. If no |
546 | configurations. If no resources are specified, suitable defaults will |
320 | resources are specified, suitable defaults will be used. Command-line |
547 | be used. Command-line arguments can be used to override resource |
321 | arguments can be used to override resource settings. The following |
548 | settings. The following resources are supported (you might want to |
322 | resources are allowed: |
549 | check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl |
|
|
550 | extensions not documented here): |
323 | |
551 | |
324 | =over 4 |
552 | =over 4 |
|
|
553 | |
|
|
554 | =item B<depth:> I<bitdepth> |
|
|
555 | |
|
|
556 | Compile I<xft>: Attempt to find a visual with the given bit depth; |
|
|
557 | option B<-depth>. |
|
|
558 | |
|
|
559 | =item B<buffered:> I<boolean> |
|
|
560 | |
|
|
561 | Compile I<xft>: Turn on/off double-buffering for xft (default enabled). |
|
|
562 | On some card/driver combination enabling it slightly decreases |
|
|
563 | performance, on most it greatly helps it. The slowdown is small, so it |
|
|
564 | should normally be enabled. |
325 | |
565 | |
326 | =item B<geometry:> I<geom> |
566 | =item B<geometry:> I<geom> |
327 | |
567 | |
328 | Create the window with the specified X window geometry [default 80x24]; |
568 | Create the window with the specified X window geometry [default 80x24]; |
329 | option B<-geometry>. |
569 | option B<-geometry>. |
… | |
… | |
343 | Use the specified colour for the colour value I<n>, where 0-7 |
583 | Use the specified colour for the colour value I<n>, where 0-7 |
344 | corresponds to low-intensity (normal) colours and 8-15 corresponds to |
584 | corresponds to low-intensity (normal) colours and 8-15 corresponds to |
345 | high-intensity (bold = bright foreground, blink = bright background) |
585 | high-intensity (bold = bright foreground, blink = bright background) |
346 | colours. The canonical names are as follows: 0=black, 1=red, 2=green, |
586 | colours. The canonical names are as follows: 0=black, 1=red, 2=green, |
347 | 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour |
587 | 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour |
348 | names used are listed in the B<COLORS AND GRAPHICS> section. |
588 | names used are listed in the B<COLOURS AND GRAPHICS> section. |
|
|
589 | |
|
|
590 | Colours higher than 15 cannot be set using resources (yet), but can be |
|
|
591 | changed using an escape command (see @@RXVT_NAME@@(7)). |
|
|
592 | |
|
|
593 | Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with |
|
|
594 | 88 colour support). Colours 80-87 are evenly spaces grey steps. |
349 | |
595 | |
350 | =item B<colorBD:> I<colour> |
596 | =item B<colorBD:> I<colour> |
351 | |
597 | |
|
|
598 | =item B<colorIT:> I<colour> |
|
|
599 | |
352 | Use the specified colour to display bold characters when the foreground |
600 | Use the specified colour to display bold or italic characters when the |
353 | colour is the default. This option will be ignored if B<realBold> is |
601 | foreground colour is the default. If font styles are not available |
354 | enabled. |
602 | (Compile I<styles>) and this option is unset, reverse video is used instead. |
355 | |
603 | |
356 | =item B<colorUL:> I<colour> |
604 | =item B<colorUL:> I<colour> |
357 | |
605 | |
358 | Use the specified colour to display underlined characters when the |
606 | Use the specified colour to display underlined characters when the |
359 | foreground colour is the default. |
607 | foreground colour is the default. |
360 | |
608 | |
361 | =item B<colorRV:> I<colour> |
609 | =item B<underlineColor:> I<colour> |
362 | |
610 | |
|
|
611 | If set, use the specified colour as the colour for the underline |
|
|
612 | itself. If unset, use the foreground colour. |
|
|
613 | |
|
|
614 | =item B<highlightColor:> I<colour> |
|
|
615 | |
363 | Use the specified colour as the background for reverse video |
616 | If set, use the specified colour as the background for highlighted |
364 | characters. |
617 | characters. If unset, use reverse video. |
|
|
618 | |
|
|
619 | =item B<highlightTextColor:> I<colour> |
|
|
620 | |
|
|
621 | If set and highlightColor is set, use the specified colour as the |
|
|
622 | foreground for highlighted characters. |
365 | |
623 | |
366 | =item B<cursorColor:> I<colour> |
624 | =item B<cursorColor:> I<colour> |
367 | |
625 | |
368 | Use the specified colour for the cursor. The default is to use the |
626 | Use the specified colour for the cursor. The default is to use the |
369 | foreground colour; option B<-cr>. |
627 | foreground colour; option B<-cr>. |
… | |
… | |
376 | |
634 | |
377 | =item B<reverseVideo:> I<boolean> |
635 | =item B<reverseVideo:> I<boolean> |
378 | |
636 | |
379 | B<True>: simulate reverse video by foreground and background colours; |
637 | B<True>: simulate reverse video by foreground and background colours; |
380 | option B<-rv>. B<False>: regular screen colours [default]; option |
638 | option B<-rv>. B<False>: regular screen colours [default]; option |
381 | B<+rv>. See note in B<COLORS AND GRAPHICS> section. |
639 | B<+rv>. See note in B<COLOURS AND GRAPHICS> section. |
382 | |
640 | |
383 | =item B<jumpScroll:> I<boolean> |
641 | =item B<jumpScroll:> I<boolean> |
384 | |
642 | |
385 | B<True>: specify that jump scrolling should be used. When scrolling |
643 | B<True>: specify that jump scrolling should be used. When receiving lots |
386 | quickly, fewer screen updates are performed [default]; option B<-j>. |
644 | of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines |
|
|
645 | has been read, resulting in fewer updates while still displaying every |
|
|
646 | received line; option B<-j>. |
|
|
647 | |
387 | B<False>: specify that smooth scrolling should be used; option B<+j>. |
648 | B<False>: specify that smooth scrolling should be used. @@RXVT_NAME@@ will |
|
|
649 | force a screen refresh on each new line it received; option B<+j>. |
388 | |
650 | |
389 | =item B<inheritPixmap:> I<boolean> |
651 | =item B<skipScroll:> I<boolean> |
390 | |
652 | |
391 | B<True>: make the background inherit the parent windows' pixmap, giving |
653 | B<True>: (the default) specify that skip scrolling should be used. When |
392 | artificial transparency. B<False>: do not inherit the parent windows' |
654 | receiving lots of lines, @@RXVT_NAME@@ will only scroll once in a while |
393 | pixmap. |
655 | (around 60 times per second), resulting in far fewer updates. This can |
|
|
656 | result in @@RXVT_NAME@@ not ever displaying some of the lines it receives; |
|
|
657 | option B<-ss>. |
|
|
658 | |
|
|
659 | B<False>: specify that everything is to be displayed, even |
|
|
660 | if the refresh is too fast for the human eye to read anything (or the |
|
|
661 | monitor to display anything); option B<+ss>. |
394 | |
662 | |
395 | =item B<fading:> I<number> |
663 | =item B<fading:> I<number> |
396 | |
664 | |
397 | Fade the text by the given percentage when focus is lost. |
665 | Fade the text by the given percentage when focus is lost; option B<-fade>. |
398 | |
666 | |
399 | =item B<tintColor:> I<colour> |
667 | =item B<fadeColor:> I<colour> |
400 | |
668 | |
401 | Tint the transparent background pixmap with the given colour. |
669 | Fade to this colour, when fading is used (see B<fading:>). The default |
|
|
670 | colour is black; option B<-fadecolor>. |
402 | |
671 | |
403 | =item B<shading:> I<number> |
672 | =item B<iconFile:> I<file> |
404 | |
673 | |
405 | Darken (0 .. 100) or lighten (-1 .. -100) the transparent background |
674 | Set the application icon pixmap; option B<-icon>. |
406 | image in addition to tinting it. |
|
|
407 | |
|
|
408 | =item B<fading:> I<number> |
|
|
409 | |
|
|
410 | Scale the tint colour by the given percentage. |
|
|
411 | |
675 | |
412 | =item B<scrollColor:> I<colour> |
676 | =item B<scrollColor:> I<colour> |
413 | |
677 | |
414 | Use the specified colour for the scrollbar [default #B2B2B2]. |
678 | Use the specified colour for the scrollbar [default #B2B2B2]. |
415 | |
679 | |
416 | =item B<troughColor:> I<colour> |
680 | =item B<troughColor:> I<colour> |
417 | |
681 | |
418 | Use the specified colour for the scrollbar's trough area [default |
682 | Use the specified colour for the scrollbar's trough area [default |
419 | #969696]. Only relevant for normal (non XTerm/NeXT) scrollbar. |
683 | #969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar. |
420 | |
684 | |
421 | =item B<backgroundPixmap:> I<file[;geom]> |
685 | =item B<borderColor:> I<colour> |
422 | |
686 | |
423 | Use the specified XPM file (note the `.xpm' extension is optional) for |
687 | The colour of the border around the text area and between the scrollbar |
424 | the background and also optionally specify its scaling with a geometry |
688 | and the text. |
425 | string B<WxH+X+Y>, in which B<"W" / "H"> specify the |
|
|
426 | horizontal/vertical scale (percent) and B<"X" / "Y"> locate the image |
|
|
427 | centre (percent). A scale of 0 displays the image with tiling. A scale |
|
|
428 | of 1 displays the image without any scaling. A scale of 2 to 9 |
|
|
429 | specifies an integer number of images in that direction. No image will |
|
|
430 | be magnified beyond 10 times its original size. The maximum permitted |
|
|
431 | scale is 1000. [default 0x0+50+50] |
|
|
432 | |
689 | |
433 | =item B<menu:> I<file[;tag]> |
|
|
434 | |
|
|
435 | Read in the specified menu file (note the `.menu' extension is |
|
|
436 | optional) and also optionally specify a starting tag to find. See the |
|
|
437 | reference documentation for details on the syntax for the menuBar. |
|
|
438 | |
|
|
439 | =item B<path:> I<path> |
|
|
440 | |
|
|
441 | Specify the colon-delimited search path for finding files (XPM and |
|
|
442 | menus), in addition to the paths specified by the B<RXVTPATH> and |
|
|
443 | B<PATH> environment variables. |
|
|
444 | |
|
|
445 | =item B<font:> I<fontname> |
690 | =item B<font:> I<fontlist> |
446 | |
691 | |
447 | Select the fonts to be used. This is a comma seperated list of font |
692 | Select the fonts to be used. This is a comma separated list of font names |
448 | names that are used in turn when trying to display Unicode characters. |
693 | that are checked in order when trying to find glyphs for characters. The |
449 | The first font defines the cell size for characters; other fonts might |
694 | first font defines the cell size for characters; other fonts might be |
450 | be smaller, but not larger. A reasonable default font list is always |
695 | smaller, but not (in general) larger. A (hopefully) reasonable default |
451 | appended to it. option B<-fn>. |
696 | font list is always appended to it; option B<-fn>. |
452 | |
697 | |
453 | =item B<realBold:> I<boolean> |
698 | Each font can either be a standard X11 core font (XLFD) name, with |
|
|
699 | optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>. |
454 | |
700 | |
455 | B<True>: Enable "real bold" support. When this option is on, bold text |
701 | In addition, each font can be prefixed with additional hints and |
456 | will be displayed using the first available bold font in the font list. |
702 | specifications enclosed in square brackets (C<[]>). The only available |
457 | Bold fonts should thus be specified in the font list after their |
703 | hint currently is C<codeset=codeset-name>, and this is only used for Xft |
458 | corresponding regular fonts. If no bold font can be found, a regular |
704 | fonts. |
459 | font will be used. option B<-rb>. B<False>: Display bold text in a |
|
|
460 | regular font, using the color specified with B<colorBD>; option B<+rb>. |
|
|
461 | |
705 | |
462 | =item B<selectstyle:> I<mode> |
706 | For example, this font resource |
463 | |
707 | |
464 | Set mouse selection style to B<old> which is 2.20, B<oldword> which is |
708 | URxvt.font: 9x15bold,\ |
465 | xterm style with 2.20 old word selection, or anything else which gives |
709 | -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\ |
466 | xterm style selection. |
710 | -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \ |
|
|
711 | [codeset=JISX0208]xft:Kochi Gothic:antialias=false, \ |
|
|
712 | xft:Code2000:antialias=false |
467 | |
713 | |
468 | =item B<scrollstyle:> I<mode> |
714 | specifies five fonts to be used. The first one is C<9x15bold> (actually |
|
|
715 | the iso8859-1 version of the second font), which is the base font (because |
|
|
716 | it is named first) and thus defines the character cell grid to be 9 pixels |
|
|
717 | wide and 15 pixels high. |
469 | |
718 | |
470 | Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is |
719 | The second font is just used to add additional unicode characters not in |
471 | the author's favourite.. |
720 | the base font, likewise the third, which is unfortunately non-bold, but |
|
|
721 | the bold version of the font does contain fewer characters, so this is a |
|
|
722 | useful supplement. |
|
|
723 | |
|
|
724 | The third font is an Xft font with aliasing turned off, and the characters |
|
|
725 | are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font |
|
|
726 | contains other characters, but we are not interested in them. |
|
|
727 | |
|
|
728 | The last font is a useful catch-all font that supplies most of the |
|
|
729 | remaining unicode characters. |
|
|
730 | |
|
|
731 | =item B<boldFont:> I<fontlist> |
|
|
732 | |
|
|
733 | =item B<italicFont:> I<fontlist> |
|
|
734 | |
|
|
735 | =item B<boldItalicFont:> I<fontlist> |
|
|
736 | |
|
|
737 | The font list to use for displaying B<bold>, I<italic> or B<< I<bold |
|
|
738 | italic> >> characters, respectively. |
|
|
739 | |
|
|
740 | If specified and non-empty, then the syntax is the same as for the |
|
|
741 | B<font>-resource, and the given font list will be used as is, which makes |
|
|
742 | it possible to substitute completely different font styles for bold and |
|
|
743 | italic. |
|
|
744 | |
|
|
745 | If unset (the default), a suitable font list will be synthesized by |
|
|
746 | "morphing" the normal text font list into the desired shape. If that is |
|
|
747 | not possible, replacement fonts of the desired shape will be tried. |
|
|
748 | |
|
|
749 | If set, but empty, then this specific style is disabled and the normal |
|
|
750 | text font will being used for the given style. |
|
|
751 | |
|
|
752 | =item B<intensityStyles:> I<boolean> |
|
|
753 | |
|
|
754 | When font styles are not enabled, or this option is enabled (B<True>, |
|
|
755 | option B<-is>, the default), bold/blink font styles imply high |
|
|
756 | intensity foreground/background colours. Disabling this option (B<False>, |
|
|
757 | option B<+is>) disables this behaviour, the high intensity colours are not |
|
|
758 | reachable. |
472 | |
759 | |
473 | =item B<title:> I<string> |
760 | =item B<title:> I<string> |
474 | |
761 | |
475 | Set window title string, the default title is the command-line |
762 | Set window title string, the default title is the command-line |
476 | specified after the B<-e> option, if any, otherwise the application |
763 | specified after the B<-e> option, if any, otherwise the application |
… | |
… | |
485 | =item B<mapAlert:> I<boolean> |
772 | =item B<mapAlert:> I<boolean> |
486 | |
773 | |
487 | B<True>: de-iconify (map) on receipt of a bell character. B<False>: no |
774 | B<True>: de-iconify (map) on receipt of a bell character. B<False>: no |
488 | de-iconify (map) on receipt of a bell character [default]. |
775 | de-iconify (map) on receipt of a bell character [default]. |
489 | |
776 | |
|
|
777 | =item B<urgentOnBell:> I<boolean> |
|
|
778 | |
|
|
779 | B<True>: set the urgency hint for the wm on receipt of a bell character. |
|
|
780 | B<False>: do not set the urgency hint [default]. |
|
|
781 | |
|
|
782 | @@RXVT_NAME@@ resets the urgency hint on every focus change. |
|
|
783 | |
490 | =item B<visualBell:> I<boolean> |
784 | =item B<visualBell:> I<boolean> |
491 | |
785 | |
492 | B<True>: use visual bell on receipt of a bell character; option B<-vb>. |
786 | B<True>: use visual bell on receipt of a bell character; option B<-vb>. |
493 | B<False>: no visual bell [default]; option B<+vb>. |
787 | B<False>: no visual bell [default]; option B<+vb>. |
494 | |
788 | |
… | |
… | |
496 | |
790 | |
497 | B<True>: start as a login shell by prepending a `-' to B<argv[0]> of |
791 | B<True>: start as a login shell by prepending a `-' to B<argv[0]> of |
498 | the shell; option B<-ls>. B<False>: start as a normal sub-shell |
792 | the shell; option B<-ls>. B<False>: start as a normal sub-shell |
499 | [default]; option B<+ls>. |
793 | [default]; option B<+ls>. |
500 | |
794 | |
|
|
795 | =item B<multiClickTime:> I<number> |
|
|
796 | |
|
|
797 | Specify the maximum time in milliseconds between multi-click select |
|
|
798 | events. The default is 500 milliseconds; option B<-mc>. |
|
|
799 | |
501 | =item B<utmpInhibit:> I<boolean> |
800 | =item B<utmpInhibit:> I<boolean> |
502 | |
801 | |
503 | B<True>: inhibit writing record into the system log file B<utmp>; |
802 | B<True>: inhibit writing record into the system log file B<utmp>; |
504 | option B<-ut>. B<False>: write record into the system log file B<utmp> |
803 | option B<-ut>. B<False>: write record into the system log file B<utmp> |
505 | [default]; option B<+ut>. |
804 | [default]; option B<+ut>. |
… | |
… | |
508 | |
807 | |
509 | Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use |
808 | Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use |
510 | B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or |
809 | B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or |
511 | B<Shift-Print> to include the scrollback as well. |
810 | B<Shift-Print> to include the scrollback as well. |
512 | |
811 | |
|
|
812 | The string will be interpreted as if typed into the shell as-is. |
|
|
813 | |
|
|
814 | Example: |
|
|
815 | |
|
|
816 | URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX) |
|
|
817 | |
|
|
818 | This creates a new file in your home directory with the screen contents |
|
|
819 | every time you hit C<Print>. |
|
|
820 | |
|
|
821 | =item B<scrollstyle:> I<mode> |
|
|
822 | |
|
|
823 | Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is |
|
|
824 | the author's favourite. |
|
|
825 | |
|
|
826 | =item B<thickness:> I<number> |
|
|
827 | |
|
|
828 | Set the scrollbar width in pixels. |
|
|
829 | |
513 | =item B<scrollBar:> I<boolean> |
830 | =item B<scrollBar:> I<boolean> |
514 | |
831 | |
515 | B<True>: enable the scrollbar [default]; option B<-sb>. B<False>: |
832 | B<True>: enable the scrollbar [default]; option B<-sb>. B<False>: |
516 | disable the scrollbar; option B<+sb>. |
833 | disable the scrollbar; option B<+sb>. |
517 | |
834 | |
… | |
… | |
536 | B<False>: do not scroll to bottom when tty receives output; option |
853 | B<False>: do not scroll to bottom when tty receives output; option |
537 | B<+si>. |
854 | B<+si>. |
538 | |
855 | |
539 | =item B<scrollWithBuffer:> I<boolean> |
856 | =item B<scrollWithBuffer:> I<boolean> |
540 | |
857 | |
541 | B<True>: scroll with scrollback buffer when tty recieves new lines (and |
858 | B<True>: scroll with scrollback buffer when tty receives new lines (i.e. |
542 | B<scrollTtyOutput> is False); option B<+sw>. B<False>: do not scroll |
859 | try to show the same lines) and B<scrollTtyOutput> is False; option |
543 | with scrollback buffer when tty recieves new lines; option B<-sw>. |
860 | B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives |
|
|
861 | new lines; option B<+sw>. |
544 | |
862 | |
545 | =item B<scrollTtyKeypress:> I<boolean> |
863 | =item B<scrollTtyKeypress:> I<boolean> |
546 | |
864 | |
547 | B<True>: scroll to bottom when a non-special key is pressed. Special keys |
865 | B<True>: scroll to bottom when a non-special key is pressed. Special keys |
548 | are those which are intercepted by rxvt-unicode for special handling and |
866 | are those which are intercepted by rxvt-unicode for special handling and |
549 | are not passed onto the shell; option B<-sk>. B<False>: do not scroll to |
867 | are not passed onto the shell; option B<-sk>. B<False>: do not scroll to |
550 | bottom when a non-special key is pressed; option B<+sk>. |
868 | bottom when a non-special key is pressed; option B<+sk>. |
551 | |
869 | |
552 | =item B<smallfont_key:> I<keysym> |
|
|
553 | |
|
|
554 | If enabled, use B<@@HOTKEY@@->I<keysym> to toggle to a smaller font |
|
|
555 | [default B<@@HOTKEY@@-@@SMALLFONT@@>] |
|
|
556 | |
|
|
557 | =item B<bigfont_key:> I<keysym> |
|
|
558 | |
|
|
559 | If enabled, use B<@@HOTKEY@@->I<keysym> to toggle to a bigger font |
|
|
560 | [default B<@@HOTKEY@@-@@BIGFONT@@>] |
|
|
561 | |
|
|
562 | =item B<saveLines:> I<number> |
870 | =item B<saveLines:> I<number> |
563 | |
871 | |
564 | Save I<number> lines in the scrollback buffer [default 64]. This |
872 | Save I<number> lines in the scrollback buffer [default 64]. This |
565 | resource is limited on most machines to 65535; option B<-sl>. |
873 | resource is limited on most machines to 65535; option B<-sl>. |
566 | |
874 | |
… | |
… | |
577 | =item B<borderLess:> I<boolean> |
885 | =item B<borderLess:> I<boolean> |
578 | |
886 | |
579 | Set MWM hints to request a borderless window, i.e. if honoured by the |
887 | Set MWM hints to request a borderless window, i.e. if honoured by the |
580 | WM, the rxvt-unicode window will not have window decorations; option B<-bl>. |
888 | WM, the rxvt-unicode window will not have window decorations; option B<-bl>. |
581 | |
889 | |
|
|
890 | =item B<skipBuiltinGlyphs:> I<boolean> |
|
|
891 | |
|
|
892 | Compile I<frills>: Disable the usage of the built-in block graphics/line |
|
|
893 | drawing characters and just rely on what the specified fonts provide. Use |
|
|
894 | this if you have a good font and want to use its block graphic glyphs; |
|
|
895 | option B<-sbg>. |
|
|
896 | |
582 | =item B<termName:> I<termname> |
897 | =item B<termName:> I<termname> |
583 | |
898 | |
584 | Specifies the terminal type name to be set in the B<TERM> environment |
899 | Specifies the terminal type name to be set in the B<TERM> environment |
585 | variable; option B<-tn>. |
900 | variable; option B<-tn>. |
586 | |
901 | |
587 | =item B<linespace:> I<number> |
902 | =item B<lineSpace:> I<number> |
588 | |
903 | |
589 | Specifies number of lines (pixel height) to insert between each row of |
904 | Specifies number of lines (pixel height) to insert between each row of |
590 | the display [default 0]; option B<-lsp>. |
905 | the display [default 0]; option B<-lsp>. |
591 | |
906 | |
592 | =item B<meta8:> I<boolean> |
907 | =item B<meta8:> I<boolean> |
… | |
… | |
597 | =item B<mouseWheelScrollPage:> I<boolean> |
912 | =item B<mouseWheelScrollPage:> I<boolean> |
598 | |
913 | |
599 | B<True>: the mouse wheel scrolls a page full. B<False>: the mouse wheel |
914 | B<True>: the mouse wheel scrolls a page full. B<False>: the mouse wheel |
600 | scrolls five lines [default]. |
915 | scrolls five lines [default]. |
601 | |
916 | |
|
|
917 | =item B<pastableTabs:> I<boolean> |
|
|
918 | |
|
|
919 | B<True>: store tabs as wide characters. B<False>: interpret tabs as cursor |
|
|
920 | movement only; option C<-ptab>. |
|
|
921 | |
602 | =item B<cursorBlink:> I<boolean> |
922 | =item B<cursorBlink:> I<boolean> |
603 | |
923 | |
604 | B<True>: blink the cursor. B<False>: do not blink the cursor [default]; |
924 | B<True>: blink the cursor. B<False>: do not blink the cursor [default]; |
605 | option B<-bc>. |
925 | option B<-bc>. |
|
|
926 | |
|
|
927 | =item B<cursorUnderline:> I<boolean> |
|
|
928 | |
|
|
929 | B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default]; |
|
|
930 | option B<-uc>. |
606 | |
931 | |
607 | =item B<pointerBlank:> I<boolean> |
932 | =item B<pointerBlank:> I<boolean> |
608 | |
933 | |
609 | B<True>: blank the pointer when a key is pressed or after a set number |
934 | B<True>: blank the pointer when a key is pressed or after a set number |
610 | of seconds of inactivity. B<False>: the pointer is always visible |
935 | of seconds of inactivity. B<False>: the pointer is always visible |
… | |
… | |
618 | |
943 | |
619 | Mouse pointer background colour. |
944 | Mouse pointer background colour. |
620 | |
945 | |
621 | =item B<pointerBlankDelay:> I<number> |
946 | =item B<pointerBlankDelay:> I<number> |
622 | |
947 | |
623 | Specifies number of seconds before blanking the pointer [default 2]. |
948 | Specifies number of seconds before blanking the pointer [default 2]. Use a |
|
|
949 | large number (e.g. C<987654321>) to effectively disable the timeout. |
624 | |
950 | |
625 | =item B<backspacekey:> I<string> |
951 | =item B<backspacekey:> I<string> |
626 | |
952 | |
627 | The string to send when the backspace key is pressed. If set to B<DEC> |
953 | The string to send when the backspace key is pressed. If set to B<DEC> |
628 | or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace> |
954 | or unset it will send B<Delete> (code 127) or, with control, B<Backspace> |
629 | (code 8) - which can be reversed with the appropriate DEC private mode |
955 | (code 8) - which can be reversed with the appropriate DEC private mode |
630 | escape sequence. |
956 | escape sequence. |
631 | |
957 | |
632 | =item B<deletekey:> I<string> |
958 | =item B<deletekey:> I<string> |
633 | |
959 | |
… | |
… | |
635 | pressed. If unset it will send the sequence traditionally associated |
961 | pressed. If unset it will send the sequence traditionally associated |
636 | with the B<Execute> key. |
962 | with the B<Execute> key. |
637 | |
963 | |
638 | =item B<cutchars:> I<string> |
964 | =item B<cutchars:> I<string> |
639 | |
965 | |
640 | The characters used as delimiters for double-click word selection. The |
966 | The characters used as delimiters for double-click word selection |
641 | built-in default: |
967 | (whitespace delimiting is added automatically if resource is given). |
642 | |
968 | |
|
|
969 | When the perl selection extension is in use (the default if compiled |
|
|
970 | in, see the @@RXVT_NAME@@perl(3) manpage), a suitable regex using these |
|
|
971 | characters will be created (if the resource exists, otherwise, no regex |
|
|
972 | will be created). In this mode, characters outside ISO-8859-1 can be used. |
|
|
973 | |
|
|
974 | When the selection extension is not used, only ISO-8859-1 characters can |
|
|
975 | be used. If not specified, the built-in default is used: |
|
|
976 | |
643 | B<< BACKSLASH `"'&()*,;<=>?@[]{|} >> |
977 | B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> |
644 | |
978 | |
645 | =item B<preeditType:> I<style> |
979 | =item B<preeditType:> I<style> |
646 | |
980 | |
647 | B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. |
981 | B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. |
648 | |
982 | |
… | |
… | |
650 | |
984 | |
651 | I<name> of inputMethod to use; option B<-im>. |
985 | I<name> of inputMethod to use; option B<-im>. |
652 | |
986 | |
653 | =item B<imLocale:> I<name> |
987 | =item B<imLocale:> I<name> |
654 | |
988 | |
655 | The locale to use for opening the IM. You can use an LC_CTYPE of e.g. |
989 | The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g. |
656 | de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input |
990 | C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the |
657 | extension to be able to input japanese characters while staying in |
991 | input extension to be able to input japanese characters while staying in |
658 | another locale. option B<-imlocale>. |
992 | another locale; option B<-imlocale>. |
659 | |
993 | |
660 | =item B<insecure> |
994 | =item B<imFont:> I<fontset> |
|
|
995 | |
|
|
996 | Specify the font-set used for XIM styles C<OverTheSpot> or |
|
|
997 | C<OffTheSpot>. It must be a standard X font set (XLFD patterns separated |
|
|
998 | by commas), i.e. it's not in the same format as the other font lists used |
|
|
999 | in @@RXVT_NAME@@. The default will be set-up to chose *any* suitable found |
|
|
1000 | found, preferably one or two pixels differing in size to the base font. |
|
|
1001 | option B<-imfont>. |
|
|
1002 | |
|
|
1003 | =item B<tripleclickwords:> I<boolean> |
|
|
1004 | |
|
|
1005 | Change the meaning of triple-click selection with the left mouse |
|
|
1006 | button. Instead of selecting a full line it will extend the selection to |
|
|
1007 | the end of the logical line only; option B<-tcw>. |
|
|
1008 | |
|
|
1009 | =item B<insecure:> I<boolean> |
661 | |
1010 | |
662 | Enables "insecure" mode. Rxvt-unicode offers some escape sequences that |
1011 | Enables "insecure" mode. Rxvt-unicode offers some escape sequences that |
663 | echo arbitrary strings like the icon name or the locale. This could be |
1012 | echo arbitrary strings like the icon name or the locale. This could be |
664 | abused if somebody gets 8-bit-clean access to your display, wether |
1013 | abused if somebody gets 8-bit-clean access to your display, whether |
665 | throuh a mail client displaying mail bodies unfiltered or though |
1014 | through a mail client displaying mail bodies unfiltered or through |
666 | write(1). Therefore, these sequences are disabled by default. (Note |
1015 | write(1) or any other means. Therefore, these sequences are disabled by |
667 | that other terminals, including xterm, have these sequences |
1016 | default. (Note that many other terminals, including xterm, have these |
668 | enabled by default). You can enable them by setting this boolean |
1017 | sequences enabled by default, which doesn't make it safer, though). |
669 | resource or specifying B<-insecure> as an option. At the moment, this |
1018 | |
670 | enabled display-answer, locale, findfont, icon label and window title |
1019 | You can enable them by setting this boolean resource or specifying |
671 | requests as well as dynamic menubar dispatch. |
1020 | B<-insecure> as an option. At the moment, this enables display-answer, |
|
|
1021 | locale, findfont, icon label and window title requests. |
672 | |
1022 | |
673 | =item B<modifier:> I<modifier> |
1023 | =item B<modifier:> I<modifier> |
674 | |
1024 | |
675 | Set the key to be interpreted as the Meta key to: B<alt>, B<meta>, |
1025 | Set the key to be interpreted as the Meta key to: B<alt>, B<meta>, |
676 | B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option |
1026 | B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option |
… | |
… | |
680 | |
1030 | |
681 | Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E) |
1031 | Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E) |
682 | character is passed through. It may contain escape values as described |
1032 | character is passed through. It may contain escape values as described |
683 | in the entry on B<keysym> following. |
1033 | in the entry on B<keysym> following. |
684 | |
1034 | |
685 | =item B<secondaryScreen:> I<bool> |
1035 | =item B<secondaryScreen:> I<boolean> |
686 | |
1036 | |
687 | Turn on/off secondary screen (default enabled). |
1037 | Turn on/off secondary screen (default enabled). |
688 | |
1038 | |
689 | =item B<secondaryScroll:> I<bool> |
1039 | =item B<secondaryScroll:> I<boolean> |
690 | |
1040 | |
691 | Turn on/off secondary screen scroll (default enabled). If the this |
1041 | Turn on/off secondary screen scroll (default enabled). If this |
692 | option is enabled, scrolls on the secondary screen will change the |
1042 | option is enabled, scrolls on the secondary screen will change the |
693 | scrollback buffer and switching to/from the secondary screen will |
1043 | scrollback buffer and, when secondaryScreen is off, switching |
694 | instead scroll the screen up. |
1044 | to/from the secondary screen will instead scroll the screen up. |
695 | |
1045 | |
|
|
1046 | =item B<hold>: I<boolean> |
|
|
1047 | |
|
|
1048 | Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ |
|
|
1049 | will not immediately destroy its window when the program executed within |
|
|
1050 | it exits. Instead, it will wait till it is being killed or closed by the |
|
|
1051 | user. |
|
|
1052 | |
|
|
1053 | =item B<chdir>: I<path> |
|
|
1054 | |
|
|
1055 | Sets the working directory for the shell (or the command specified via |
|
|
1056 | B<-e>). The I<path> must be an absolute path and it must exist for |
|
|
1057 | @@RXVT_NAME@@ to start. If it isn't specified then the current working |
|
|
1058 | directory will be used; option B<-cd>. |
|
|
1059 | |
696 | =item B<keysym.>I<sym>: I<string> |
1060 | =item B<keysym.>I<sym>: I<action> |
697 | |
1061 | |
698 | Associate I<string> with keysym I<sym> (B<0xFF00 - 0xFFFF>). It may |
1062 | Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening |
699 | contain escape values (\a: bell, \b: backspace, \e, \E: escape, \n: |
1063 | resource name B<keysym.> cannot be omitted. |
700 | newline, \r: return, \t: |
1064 | |
701 | tab, \000: octal number) or control characters (^?: delete, ^@: null, |
1065 | Using this resource, you can map key combinations such as |
702 | ^A ...) and may enclosed with double quotes so that it can start or end |
1066 | C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different |
703 | with whitespace. The intervening resource name B<keysym.> cannot be |
1067 | string than would normally result from that combination, making the |
704 | omitted. This resource is only available when compiled with |
1068 | terminal scroll up or down the way you want it, or any other thing an |
705 | KEYSYM_RESOURCE. |
1069 | extension might provide. |
|
|
1070 | |
|
|
1071 | The key combination that triggers the action, I<sym>, has the following format: |
|
|
1072 | |
|
|
1073 | (modifiers-)key |
|
|
1074 | |
|
|
1075 | Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>, |
|
|
1076 | B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, |
|
|
1077 | B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>, |
|
|
1078 | B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>. |
|
|
1079 | |
|
|
1080 | The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to |
|
|
1081 | whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr |
|
|
1082 | keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the |
|
|
1083 | current application keymap mode state. |
|
|
1084 | |
|
|
1085 | Due the the large number of modifier combinations, a key mapping will |
|
|
1086 | match if I<at least> the specified identifiers are being set, and no other |
|
|
1087 | key mappings with those and more bits are being defined. That means that |
|
|
1088 | defining a mapping for C<a> will automatically provide definitions for |
|
|
1089 | C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings |
|
|
1090 | themselves. See the C<builtin:> action, below, for a way to work around |
|
|
1091 | this when this is a problem. |
|
|
1092 | |
|
|
1093 | The spelling of I<key> depends on your implementation of X. An easy way to |
|
|
1094 | find a key name is to use the B<xev>(1) command. You can find a list by |
|
|
1095 | looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit |
|
|
1096 | the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym |
|
|
1097 | value (B<0x0000 - 0xFFFF>). |
|
|
1098 | |
|
|
1099 | As with any resource value, the I<action> string may contain backslash |
|
|
1100 | escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal |
|
|
1101 | number), see RESOURCES in C<man 7 X> for further details. |
|
|
1102 | |
|
|
1103 | An action starts with an action prefix that selects a certain type |
|
|
1104 | of action, followed by a colon. An action string without colons is |
|
|
1105 | interpreted as a literal string to pass to the tty (as if it was |
|
|
1106 | prefixed with C<string:>). |
|
|
1107 | |
|
|
1108 | The following action prefixes are known - extensions can provide |
|
|
1109 | additional prefixes: |
|
|
1110 | |
|
|
1111 | =over 4 |
|
|
1112 | |
|
|
1113 | =item string:STRING |
|
|
1114 | |
|
|
1115 | If the I<action> starts with C<string:> (or otherwise contains no colons), |
|
|
1116 | then the remaining C<STRING> will be passed to the program running in the |
|
|
1117 | terminal. For example, you could replace whatever Shift-Tab outputs by the |
|
|
1118 | string C<echo rm -rf /> followed by a newline: |
|
|
1119 | |
|
|
1120 | URxvt.keysym.Shift-Tab: string:echo rm -rf /\n |
|
|
1121 | |
|
|
1122 | This could in theory be used to completely redefine your keymap. |
|
|
1123 | |
|
|
1124 | =item command:STRING |
|
|
1125 | |
|
|
1126 | If I<action> takes the form of C<command:STRING>, the specified B<STRING> |
|
|
1127 | is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically |
|
|
1128 | the opposite of C<string:> - instead of sending it to the program running |
|
|
1129 | in the terminal, it will be treated as if it were program output). This is |
|
|
1130 | most useful to feed command sequences into @@RXVT_NAME@@. |
|
|
1131 | |
|
|
1132 | For example the following means "change the current locale to C<zh_CN.GBK> |
|
|
1133 | when Control-Meta-c is being pressed": |
|
|
1134 | |
|
|
1135 | URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 |
|
|
1136 | |
|
|
1137 | The following example will map Control-Meta-1 and Control-Meta-2 to |
|
|
1138 | the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited |
|
|
1139 | font-switching at runtime: |
|
|
1140 | |
|
|
1141 | URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 |
|
|
1142 | URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 |
|
|
1143 | |
|
|
1144 | Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more |
|
|
1145 | info): |
|
|
1146 | |
|
|
1147 | URxvt.keysym.M-C-3: command:\033[8;25;80t |
|
|
1148 | URxvt.keysym.M-C-4: command:\033[8;48;110t |
|
|
1149 | |
|
|
1150 | =item builtin: |
|
|
1151 | |
|
|
1152 | The builtin action is the action that @@RXVT_NAME@@ would execute if no |
|
|
1153 | key binding existed for the key combination. The obvious use is to undo |
|
|
1154 | the effect of existing bindings. The not so obvious use is to reinstate |
|
|
1155 | bindings when another binding overrides too many modifiers. |
|
|
1156 | |
|
|
1157 | For example if you overwrite the C<Insert> key you will disable |
|
|
1158 | @@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke |
|
|
1159 | "holes" into the user-defined keymap using the C<builtin:> replacement: |
|
|
1160 | |
|
|
1161 | URxvt.keysym.Insert: <my insert key sequence> |
|
|
1162 | URxvt.keysym.S-Insert: builtin: |
|
|
1163 | |
|
|
1164 | The first line defines a mapping for C<Insert> and I<any> combination |
|
|
1165 | of modifiers. The second line re-establishes the default mapping for |
|
|
1166 | C<Shift-Insert>. |
|
|
1167 | |
|
|
1168 | =item builtin-string: |
|
|
1169 | |
|
|
1170 | This action is mainly useful to restore string mappings for keys that |
|
|
1171 | have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit |
|
|
1172 | difficult to explain - basically, this action will send the string to the |
|
|
1173 | application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in |
|
|
1174 | action for it. |
|
|
1175 | |
|
|
1176 | An example might make it clearer: @@RXVT_NAME@@ normally pastes the |
|
|
1177 | selection when you press C<Shift-Insert>. With the following bindings, it |
|
|
1178 | would instead emit the (undocumented, but what applications running in the |
|
|
1179 | terminal might expect) sequence C<ESC [ 2 $> instead: |
|
|
1180 | |
|
|
1181 | URxvt.keysym.S-Insert: builtin-string: |
|
|
1182 | URxvt.keysym.C-S-Insert: builtin: |
|
|
1183 | |
|
|
1184 | The first line disables the paste functionality for that key |
|
|
1185 | combination, and the second reinstates the default behaviour for |
|
|
1186 | C<Control-Shift-Insert>, which would otherwise be overridden. |
|
|
1187 | |
|
|
1188 | Similarly, to let applications gain access to the C<C-M-c> (copy to |
|
|
1189 | clipboard) and C<C-M-v> (paste clipboard) key combination, you can do |
|
|
1190 | this: |
|
|
1191 | |
|
|
1192 | URxvt.keysym.C-M-c: builtin-string: |
|
|
1193 | URxvt.keysym.C-M-v: builtin-string: |
|
|
1194 | |
|
|
1195 | =item EXTENSION:STRING |
|
|
1196 | |
|
|
1197 | An action of this form invokes the action B<STRING>, if any, provided |
|
|
1198 | by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will |
|
|
1199 | be loaded automatically if necessary. |
|
|
1200 | |
|
|
1201 | Not all extensions define actions, but popular extensions that do |
|
|
1202 | include the I<selection> and I<matcher> extensions (documented in their |
|
|
1203 | own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1), |
|
|
1204 | respectively). |
|
|
1205 | |
|
|
1206 | From the silly examples department, this will rot13-"encrypt" |
|
|
1207 | @@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC |
|
|
1208 | keyboards: |
|
|
1209 | |
|
|
1210 | URxvt.keysym.M-C-c: selection:rot13 |
|
|
1211 | |
|
|
1212 | =item perl:STRING *DEPRECATED* |
|
|
1213 | |
|
|
1214 | This is a deprecated way of invoking commands provided by perl |
|
|
1215 | extensions. It is still supported, but should not be used anymore. |
|
|
1216 | |
|
|
1217 | =back |
|
|
1218 | |
|
|
1219 | =item B<perl-ext-common>: I<string> |
|
|
1220 | |
|
|
1221 | =item B<perl-ext>: I<string> |
|
|
1222 | |
|
|
1223 | Comma-separated list(s) of perl extension scripts (default: C<default>) to |
|
|
1224 | use in this terminal instance; option B<-pe>. |
|
|
1225 | |
|
|
1226 | Extension names can be prefixed with a C<-> sign to prohibit using |
|
|
1227 | them. This can be useful to selectively disable some extensions loaded |
|
|
1228 | by default, or specified via the C<perl-ext-common> resource. For |
|
|
1229 | example, C<default,-selection> will use all the default extensions except |
|
|
1230 | C<selection>. |
|
|
1231 | |
|
|
1232 | The default set includes the C<selection>, C<option-popup>, |
|
|
1233 | C<selection-popup> and C<readline> extensions, any extensions that |
|
|
1234 | define keybindings via C<BINDING> meta comments, and extensions which |
|
|
1235 | are mentioned in B<keysym> resources. |
|
|
1236 | |
|
|
1237 | Any extension such that a corresponding resource is given on the |
|
|
1238 | command line is automatically appended to B<perl-ext>. |
|
|
1239 | |
|
|
1240 | Each extension is looked up in the library directories, loaded if |
|
|
1241 | necessary, and bound to the current terminal instance. When the library |
|
|
1242 | search path contains multiple extension files of the same name, then the |
|
|
1243 | first one found will be used. |
|
|
1244 | |
|
|
1245 | If both of these resources are the empty string, then the perl interpreter |
|
|
1246 | will not be initialized. The rationale for having two options is that |
|
|
1247 | B<perl-ext-common> will be used for extensions that should be available to |
|
|
1248 | all instances, while B<perl-ext> is used for specific instances. |
|
|
1249 | |
|
|
1250 | =item B<perl-eval>: I<string> |
|
|
1251 | |
|
|
1252 | Perl code to be evaluated when all extensions have been registered. See |
|
|
1253 | the @@RXVT_NAME@@perl(3) manpage. |
|
|
1254 | |
|
|
1255 | =item B<perl-lib>: I<path> |
|
|
1256 | |
|
|
1257 | Colon-separated list of additional directories that hold extension |
|
|
1258 | scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look |
|
|
1259 | in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and |
|
|
1260 | lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>. |
|
|
1261 | |
|
|
1262 | See the @@RXVT_NAME@@perl(3) manpage. |
|
|
1263 | |
|
|
1264 | =item B<< selection.pattern-I<idx> >>: I<perl-regex> |
|
|
1265 | |
|
|
1266 | Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for |
|
|
1267 | details. |
|
|
1268 | |
|
|
1269 | =item B<< selection-autotransform.I<idx> >>: I<perl-transform> |
|
|
1270 | |
|
|
1271 | Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage |
|
|
1272 | for details. |
|
|
1273 | |
|
|
1274 | =item B<searchable-scrollback:> I<keysym> *DEPRECATED* |
|
|
1275 | |
|
|
1276 | This resource is deprecated and will be removed. Use a B<keysym> resource |
|
|
1277 | instead, e.g.: |
|
|
1278 | |
|
|
1279 | URxvt.keysym.M-s: searchable-scrollback:start |
|
|
1280 | |
|
|
1281 | =item B<url-launcher>: I<string> |
|
|
1282 | |
|
|
1283 | Specifies the program to be started with a URL argument. Used by the |
|
|
1284 | C<selection-popup> and C<matcher> perl extensions. |
|
|
1285 | |
|
|
1286 | =item B<transient-for>: I<windowid> |
|
|
1287 | |
|
|
1288 | Compile I<frills>: Sets the WM_TRANSIENT_FOR property to the given window id. |
|
|
1289 | |
|
|
1290 | =item B<override-redirect>: I<boolean> |
|
|
1291 | |
|
|
1292 | Compile I<frills>: Sets override-redirect for the terminal window, making |
|
|
1293 | it almost invisible to window managers; option B<-override-redirect>. |
|
|
1294 | |
|
|
1295 | =item B<iso14755:> I<boolean> |
|
|
1296 | |
|
|
1297 | Turn on/off ISO 14755 (default enabled). |
|
|
1298 | |
|
|
1299 | =item B<iso14755_52:> I<boolean> |
|
|
1300 | |
|
|
1301 | Turn on/off ISO 14755 5.2 mode (default enabled). |
|
|
1302 | |
|
|
1303 | =back |
|
|
1304 | |
|
|
1305 | =head1 BACKGROUND IMAGE OPTIONS AND RESOURCES |
|
|
1306 | |
|
|
1307 | =over 4 |
|
|
1308 | |
|
|
1309 | =item B<-pixmap> I<file[;oplist]> |
|
|
1310 | |
|
|
1311 | =item B<backgroundPixmap:> I<file[;oplist]> |
|
|
1312 | |
|
|
1313 | Compile I<pixbuf>: Use the specified image file as the window's |
|
|
1314 | background and also optionally specify a colon separated list of |
|
|
1315 | operations to modify it. Note that you may need to quote the C<;> |
|
|
1316 | character when using the command line option, as C<;> is usually a |
|
|
1317 | metacharacter in shells. Supported operations are: |
|
|
1318 | |
|
|
1319 | =over 4 |
|
|
1320 | |
|
|
1321 | =item B<WxH+X+Y> |
|
|
1322 | |
|
|
1323 | sets scale and position. B<"W" / "H"> specify the horizontal/vertical |
|
|
1324 | scale (percent), and B<"X" / "Y"> locate the image centre (percent). A |
|
|
1325 | scale of 0 disables scaling. |
|
|
1326 | |
|
|
1327 | =item B<op=tile> |
|
|
1328 | |
|
|
1329 | enables tiling |
|
|
1330 | |
|
|
1331 | =item B<op=keep-aspect> |
|
|
1332 | |
|
|
1333 | maintain the image aspect ratio when scaling |
|
|
1334 | |
|
|
1335 | =item B<op=root-align> |
|
|
1336 | |
|
|
1337 | use the position of the terminal window relative to the root window as |
|
|
1338 | the image offset, simulating a root window background |
|
|
1339 | |
|
|
1340 | =back |
|
|
1341 | |
|
|
1342 | The default scale and position setting is C<100x100+50+50>. |
|
|
1343 | Alternatively, a predefined set of templates can be used to achieve |
|
|
1344 | the most common setups: |
|
|
1345 | |
|
|
1346 | =over 4 |
|
|
1347 | |
|
|
1348 | =item B<style=tiled> |
|
|
1349 | |
|
|
1350 | the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile |
|
|
1351 | |
|
|
1352 | =item B<style=aspect-stretched> |
|
|
1353 | |
|
|
1354 | the image is scaled to fill the whole window maintaining the aspect |
|
|
1355 | ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect |
|
|
1356 | |
|
|
1357 | =item B<style=stretched> |
|
|
1358 | |
|
|
1359 | the image is scaled to fill the whole window. Equivalent to 100x100 |
|
|
1360 | |
|
|
1361 | =item B<style=centered> |
|
|
1362 | |
|
|
1363 | the image is centered with no scaling. Equivalent to 0x0+50+50 |
|
|
1364 | |
|
|
1365 | =item B<style=root-tiled> |
|
|
1366 | |
|
|
1367 | the image is tiled with no scaling and using 'root' positioning. |
|
|
1368 | Equivalent to 0x0:op=tile:op=root-align |
|
|
1369 | |
|
|
1370 | =back |
|
|
1371 | |
|
|
1372 | If multiple templates are specified the last one wins. Note that a |
|
|
1373 | template overrides all the scale, position and operations settings. |
|
|
1374 | |
|
|
1375 | If used in conjunction with pseudo-transparency, the specified pixmap |
|
|
1376 | will be blended over the transparent background using alpha-blending. |
|
|
1377 | |
|
|
1378 | =item B<-tr>|B<+tr> |
|
|
1379 | |
|
|
1380 | =item B<transparent:> I<boolean> |
|
|
1381 | |
|
|
1382 | Turn on/off pseudo-transparency by using the root pixmap as background. |
|
|
1383 | |
|
|
1384 | B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but |
|
|
1385 | will be removed in future versions. |
|
|
1386 | |
|
|
1387 | =item B<-tint> I<colour> |
|
|
1388 | |
|
|
1389 | =item B<tintColor:> I<colour> |
|
|
1390 | |
|
|
1391 | Tint the transparent background with the given colour. Note that a |
|
|
1392 | black tint yields a completely black image while a white tint yields |
|
|
1393 | the image unchanged. |
|
|
1394 | |
|
|
1395 | =item B<-sh> I<number> |
|
|
1396 | |
|
|
1397 | =item B<shading:> I<number> |
|
|
1398 | |
|
|
1399 | Darken (0 .. 99) or lighten (101 .. 200) the transparent background. |
|
|
1400 | A value of 100 means no shading. |
|
|
1401 | |
|
|
1402 | =item B<-blr> I<HxV> |
|
|
1403 | |
|
|
1404 | =item B<blurRadius:> I<HxV> |
|
|
1405 | |
|
|
1406 | Apply gaussian blur with the specified radius to the transparent |
|
|
1407 | background. If a single number is specified, the vertical and |
|
|
1408 | horizontal radii are considered to be the same. Setting one of the |
|
|
1409 | radii to 1 and the other to a large number creates interesting effects |
|
|
1410 | on some backgrounds. The maximum radius value is 128. An horizontal or |
|
|
1411 | vertical radius of 0 disables blurring. |
|
|
1412 | |
|
|
1413 | =item B<path:> I<path> |
|
|
1414 | |
|
|
1415 | Specify the colon-delimited search path for finding background image files. |
706 | |
1416 | |
707 | =back |
1417 | =back |
708 | |
1418 | |
709 | =head1 THE SCROLLBAR |
1419 | =head1 THE SCROLLBAR |
710 | |
1420 | |
… | |
… | |
724 | the normal text selection/insertion, hold either the Shift or the Meta |
1434 | the normal text selection/insertion, hold either the Shift or the Meta |
725 | (Alt) key while performing the desired mouse action. |
1435 | (Alt) key while performing the desired mouse action. |
726 | |
1436 | |
727 | If mouse reporting mode is active, the normal scrollbar actions are |
1437 | If mouse reporting mode is active, the normal scrollbar actions are |
728 | disabled -- on the assumption that we are using a fullscreen |
1438 | disabled -- on the assumption that we are using a fullscreen |
729 | application. Instead, pressing Button1 and Button3 sends B<ESC[6~> |
1439 | application. Instead, pressing Button1 and Button3 sends B<ESC [ 6 ~> |
730 | (Next) and B<ESC[5~> (Prior), respectively. Similarly, clicking on the |
1440 | (Next) and B<ESC [ 5 ~> (Prior), respectively. Similarly, clicking on the |
731 | up and down arrows sends B<ESC[A> (Up) and B<ESC[B> (Down), |
1441 | up and down arrows sends B<ESC [ A> (Up) and B<ESC [ B> (Down), |
732 | respectively. |
1442 | respectively. |
733 | |
1443 | |
734 | =head1 TEXT SELECTION AND INSERTION |
1444 | =head1 THE SELECTION: SELECTING AND PASTING TEXT |
735 | |
1445 | |
736 | The behaviour of text selection and insertion mechanism is similar to |
1446 | The behaviour of text selection and insertion/pasting mechanism is similar |
737 | I<xterm>(1). |
1447 | to I<xterm>(1). |
738 | |
1448 | |
739 | =over 4 |
1449 | =over 4 |
740 | |
1450 | |
741 | =item B<Selection>: |
1451 | =item B<Selecting>: |
742 | |
1452 | |
743 | Left click at the beginning of the region, drag to the end of the |
1453 | Left click at the beginning of the region, drag to the end of the region |
744 | region and release; Right click to extend the marked region; Left |
1454 | and release; Right click to extend the marked region; Left double-click |
745 | double-click to select a word; Left triple-click to select the entire |
1455 | to select a word; Left triple-click to select the entire logical line |
746 | line. |
1456 | (which can span multiple screen lines), unless modified by resource |
|
|
1457 | B<tripleclickwords>. |
747 | |
1458 | |
|
|
1459 | Starting a selection while pressing the B<Meta> key (or B<Meta+Ctrl> keys) |
|
|
1460 | (Compile: I<frills>) will create a rectangular selection instead of a |
|
|
1461 | normal one. In this mode, every selected row becomes its own line in the |
|
|
1462 | selection, and trailing whitespace is visually underlined and removed from |
|
|
1463 | the selection. |
|
|
1464 | |
748 | =item B<Insertion>: |
1465 | =item B<Pasting>: |
749 | |
1466 | |
750 | Pressing and releasing the Middle mouse button (or B<Shift-Insert>) in |
1467 | Pressing and releasing the Middle mouse button in an B<@@RXVT_NAME@@> |
751 | an B<@@RXVT_NAME@@> window causes the current text selection to be |
1468 | window causes the value of the PRIMARY selection (or CLIPBOARD with the |
752 | inserted as if it had been typed on the keyboard. |
1469 | B<Meta> modifier) to be inserted as if it had been typed on the keyboard. |
|
|
1470 | |
|
|
1471 | Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be |
|
|
1472 | inserted too. |
|
|
1473 | |
|
|
1474 | rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and |
|
|
1475 | <Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first |
|
|
1476 | binding causes the value of the internal selection to be copied to the |
|
|
1477 | CLIPBOARD selection, while the second binding causes the value of the |
|
|
1478 | CLIPBOARD selection to be inserted. |
753 | |
1479 | |
754 | =back |
1480 | =back |
755 | |
1481 | |
756 | =head1 CHANGING FONTS |
1482 | =head1 CHANGING FONTS |
757 | |
1483 | |
758 | You can change fonts on-the-fly, which is to say cycle through the |
1484 | Changing fonts (or font sizes, respectively) via the keypad is not yet |
759 | default font and others of various sizes, by using B<Shift-KP_Add> and |
1485 | supported in rxvt-unicode. Bug me if you need this. |
760 | B<Shift-KP_Subtract>. Or, alternatively (if enabled) with |
1486 | |
761 | B<@@HOTKEY@@-@@BIGFONT@@> and B<@@HOTKEY@@-@@SMALLFONT@@>, where the |
1487 | You can, however, switch fonts at runtime using escape sequences, e.g.: |
762 | actual key can be selected using resources |
1488 | |
763 | B<smallfont_key>/B<bigfont_key>. |
1489 | printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic" |
|
|
1490 | |
|
|
1491 | You can use keyboard shortcuts, too: |
|
|
1492 | |
|
|
1493 | URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 |
|
|
1494 | URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007 |
|
|
1495 | |
|
|
1496 | rxvt-unicode will automatically re-apply these fonts to the output so far. |
764 | |
1497 | |
765 | =head1 ISO 14755 SUPPORT |
1498 | =head1 ISO 14755 SUPPORT |
766 | |
1499 | |
767 | Partial ISO 14755-support is implemented. that means that pressing |
1500 | ISO 14755 is a standard for entering and viewing unicode characters |
|
|
1501 | and character codes using the keyboard. It consists of 4 parts. The |
|
|
1502 | first part is available if rxvt-unicode has been compiled with |
|
|
1503 | C<--enable-frills>, the rest is available when rxvt-unicode was compiled |
|
|
1504 | with C<--enable-iso14755>. |
768 | |
1505 | |
769 | Section 5.1: Control and Shift together enters unicode input |
1506 | =over 4 |
770 | mode. Entering hex digits composes a Unicode character, pressing space or |
|
|
771 | releasing the modifiers commits the keycode and every other key cancels |
|
|
772 | the current input character. |
|
|
773 | |
1507 | |
774 | Section 5.2: Pressing and immediately releasing Control and Shift together |
1508 | =item * 5.1: Basic method |
775 | enters keycap entry mode for the next key: pressing a function key (tab, |
1509 | |
776 | return etc..) will enter the unicode character corresponding to the given |
1510 | This allows you to enter unicode characters using their hexcode. |
777 | key. |
1511 | |
|
|
1512 | Start by pressing and holding both C<Control> and C<Shift>, then enter |
|
|
1513 | hex-digits (between one and six). Releasing C<Control> and C<Shift> will |
|
|
1514 | commit the character as if it were typed directly. While holding down |
|
|
1515 | C<Control> and C<Shift> you can also enter multiple characters by pressing |
|
|
1516 | C<Space>, which will commit the current character and lets you start a new |
|
|
1517 | one. |
|
|
1518 | |
|
|
1519 | As an example of use, imagine a business card with a japanese e-mail |
|
|
1520 | address, which you cannot type. Fortunately, the card has the e-mail |
|
|
1521 | address printed as hexcodes, e.g. C<671d 65e5>. You can enter this easily |
|
|
1522 | by pressing C<Control> and C<Shift>, followed by C<6-7-1-D-SPACE-6-5-E-5>, |
|
|
1523 | followed by releasing the modifier keys. |
|
|
1524 | |
|
|
1525 | =item * 5.2: Keyboard symbols entry method |
|
|
1526 | |
|
|
1527 | This mode lets you input characters representing the keycap symbols of |
|
|
1528 | your keyboard, if representable in the current locale encoding. |
|
|
1529 | |
|
|
1530 | Start by pressing C<Control> and C<Shift> together, then releasing |
|
|
1531 | them. The next special key (cursor keys, home etc.) you enter will not |
|
|
1532 | invoke its usual function but instead will insert the corresponding |
|
|
1533 | keycap symbol. The symbol will only be entered when the key has been |
|
|
1534 | released, otherwise pressing e.g. C<Shift> would enter the symbol for |
|
|
1535 | C<ISO Level 2 Switch>, although your intention might have been to enter a |
|
|
1536 | reverse tab (Shift-Tab). |
|
|
1537 | |
|
|
1538 | =item * 5.3: Screen-selection entry method |
|
|
1539 | |
|
|
1540 | While this is implemented already (it's basically the selection |
|
|
1541 | mechanism), it could be extended by displaying a unicode character map. |
|
|
1542 | |
|
|
1543 | =item * 5.4: Feedback method for identifying displayed characters for later input |
|
|
1544 | |
|
|
1545 | This method lets you display the unicode character code associated with |
|
|
1546 | characters already displayed. |
|
|
1547 | |
|
|
1548 | You enter this mode by holding down C<Control> and C<Shift> together, then |
|
|
1549 | pressing and holding the left mouse button and moving around. The unicode |
|
|
1550 | hex code(s) (it might be a combining character) of the character under the |
|
|
1551 | pointer is displayed until you release C<Control> and C<Shift>. |
|
|
1552 | |
|
|
1553 | In addition to the hex codes it will display the font used to draw this |
|
|
1554 | character - due to implementation reasons, characters combined with |
|
|
1555 | combining characters, line drawing characters and unknown characters will |
|
|
1556 | always be drawn using the built-in support font. |
|
|
1557 | |
|
|
1558 | =back |
|
|
1559 | |
|
|
1560 | With respect to conformance, rxvt-unicode is supposed to be compliant to |
|
|
1561 | both scenario A and B of ISO 14755, including part 5.2. |
778 | |
1562 | |
779 | =head1 LOGIN STAMP |
1563 | =head1 LOGIN STAMP |
780 | |
1564 | |
781 | B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so |
1565 | B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that |
782 | that it can be seen via the I<who(1)> command, and can accept messages. |
1566 | it can be seen via the I<who(1)> command, and can accept messages. To |
783 | To allow this feature, B<@@RXVT_NAME@@> must be installed setuid root on |
1567 | allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root |
784 | some systems. |
1568 | on some systems or setgid to root or to some other group on others. |
785 | |
1569 | |
786 | =head1 COLORS AND GRAPHICS |
1570 | =head1 COLOURS AND GRAPHICS |
787 | |
1571 | |
788 | In addition to the default foreground and background colours, |
1572 | In addition to the default foreground and background colours, |
789 | B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus |
1573 | B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus |
790 | high-intensity bold/blink versions of the same). Here is a list of the |
1574 | high-intensity (potentially bold/blink) versions of the same, and 72 (or |
791 | colours with their B<rgb.txt> names. |
1575 | 240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB |
|
|
1576 | cube plus a 8 (24) colour greyscale ramp. |
|
|
1577 | |
|
|
1578 | Here is a list of the ANSI colours with their names. |
792 | |
1579 | |
793 | =begin table |
1580 | =begin table |
794 | |
1581 | |
795 | B<color0> (black) = Black |
1582 | B<color0> (black) = Black |
796 | B<color1> (red) = Red3 |
1583 | B<color1> (red) = Red3 |
… | |
… | |
816 | It is also possible to specify the colour values of B<foreground>, |
1603 | It is also possible to specify the colour values of B<foreground>, |
817 | B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as |
1604 | B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as |
818 | a number 0-15, as a convenient shorthand to reference the colour name of |
1605 | a number 0-15, as a convenient shorthand to reference the colour name of |
819 | color0-color15. |
1606 | color0-color15. |
820 | |
1607 | |
|
|
1608 | The following text gives values for the standard 88 colour mode (and |
|
|
1609 | values for the 256 colour mode in parentheses). |
|
|
1610 | |
|
|
1611 | The RGB cube uses indices 16..79 (16..231) using the following formulas: |
|
|
1612 | |
|
|
1613 | index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3 |
|
|
1614 | index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5 |
|
|
1615 | |
|
|
1616 | The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10% |
|
|
1617 | steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of |
|
|
1618 | the RGB cube. |
|
|
1619 | |
|
|
1620 | Together, all those colours implement the 88 (256) colour xterm |
|
|
1621 | colours. Only the first 16 can be changed using resources currently, the |
|
|
1622 | rest can only be changed via command sequences ("escape codes"). |
|
|
1623 | |
|
|
1624 | Applications are advised to use terminfo or command sequences to discover |
|
|
1625 | number and RGB values of all colours (yes, you can query this...). |
|
|
1626 | |
821 | Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by |
1627 | Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by |
822 | always swapping the foreground/background colours. This is in contrast to |
1628 | always swapping the foreground/background colours. This is in contrast to |
823 | I<xterm>(1) where the colours are only swapped if they have not otherwise |
1629 | I<xterm>(1) where the colours are only swapped if they have not otherwise |
824 | been specified. For example, |
1630 | been specified. For example, |
825 | |
1631 | |
|
|
1632 | @@RXVT_NAME@@ -fg Black -bg White -rv |
|
|
1633 | |
|
|
1634 | would yield White on Black, while on I<xterm>(1) it would yield Black on |
|
|
1635 | White. |
|
|
1636 | |
|
|
1637 | =head2 ALPHA CHANNEL SUPPORT |
|
|
1638 | |
|
|
1639 | If Xft support has been compiled in and as long as Xft/Xrender/X don't get |
|
|
1640 | their act together, rxvt-unicode will do its own alpha channel management: |
|
|
1641 | |
|
|
1642 | You can prefix any colour with an opaqueness percentage enclosed in |
|
|
1643 | brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage |
|
|
1644 | (0-100) that specifies the opacity of the colour, where C<0> is completely |
|
|
1645 | transparent and C<100> is completely opaque. For example, C<[50]red> is a |
|
|
1646 | half-transparent red, while C<[95]#00ff00> is an almost opaque green. This |
|
|
1647 | is the recommended format to specify transparency values, and works with |
|
|
1648 | all ways to specify a colour. |
|
|
1649 | |
|
|
1650 | For complete control, rxvt-unicode also supports |
|
|
1651 | C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour |
|
|
1652 | specifications, where the additional C<aaaa> component specifies opacity |
|
|
1653 | (alpha) values. The minimum value of C<0000> is completely transparent, |
|
|
1654 | while C<ffff> is completely opaque). The two example colours from |
|
|
1655 | earlier could also be specified as C<rgba:ff00/0000/0000/8000> and |
|
|
1656 | C<rgba:0000/ff00/0000/f332>. |
|
|
1657 | |
|
|
1658 | You probably need to specify B<"-depth 32">, too, to force a visual with |
|
|
1659 | alpha channels, and have the luck that your X-server uses ARGB pixel |
|
|
1660 | layout, as X is far from just supporting ARGB visuals out of the box, and |
|
|
1661 | rxvt-unicode just fudges around. |
|
|
1662 | |
|
|
1663 | For example, the following selects an almost completely transparent black |
|
|
1664 | background, and an almost opaque pink foreground: |
|
|
1665 | |
|
|
1666 | @@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink" |
|
|
1667 | |
|
|
1668 | When not using a background image, then the interpretation of the |
|
|
1669 | alpha channel is up to your compositing manager (most interpret it as |
|
|
1670 | transparency of course). |
|
|
1671 | |
|
|
1672 | When using a background pixmap or pseudo-transparency, then the background |
|
|
1673 | colour will always behave as if it were completely transparent (so the |
|
|
1674 | background image shows instead), regardless of how it was specified, while |
|
|
1675 | other colours will either be transparent as specified (the background |
|
|
1676 | image will show through) on servers supporting the RENDER extension, or |
|
|
1677 | fully opaque on servers not supporting the RENDER EXTENSION. |
|
|
1678 | |
|
|
1679 | Please note that due to bugs in Xft, specifying alpha values might result |
|
|
1680 | in garbage being displayed when the X-server does not support the RENDER |
|
|
1681 | extension. |
|
|
1682 | |
|
|
1683 | =head1 ENVIRONMENT |
|
|
1684 | |
|
|
1685 | B<@@RXVT_NAME@@> sets and/or uses the following environment variables: |
|
|
1686 | |
826 | =over 4 |
1687 | =over 4 |
827 | |
1688 | |
828 | =item B<@@RXVT_NAME@@ -fg Black -bg White -rv> |
1689 | =item B<TERM> |
829 | |
1690 | |
830 | would yield White on Black, while on I<xterm>(1) it would yield Black |
1691 | Normally set to C<rxvt-unicode>, unless overwritten at configure time, via |
831 | on White. |
1692 | resources or on the command line. |
|
|
1693 | |
|
|
1694 | =item B<COLORTERM> |
|
|
1695 | |
|
|
1696 | Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was |
|
|
1697 | compiled with background image support, and optionally with the added |
|
|
1698 | extension C<-mono> to indicate that rxvt-unicode runs on a monochrome |
|
|
1699 | screen. |
|
|
1700 | |
|
|
1701 | =item B<COLORFGBG> |
|
|
1702 | |
|
|
1703 | Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is |
|
|
1704 | the colour code used as default foreground/text colour (or the string |
|
|
1705 | C<default> to indicate that the default-colour escape sequence is to be |
|
|
1706 | used), C<bg> is the colour code used as default background colour (or the |
|
|
1707 | string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@ |
|
|
1708 | was compiled with background image support. Libraries like C<ncurses> |
|
|
1709 | and C<slang> can (and do) use this information to optimize screen output. |
|
|
1710 | |
|
|
1711 | =item B<WINDOWID> |
|
|
1712 | |
|
|
1713 | Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel |
|
|
1714 | window, which usually has subwindows for the scrollbar, the terminal |
|
|
1715 | window and so on). |
|
|
1716 | |
|
|
1717 | =item B<TERMINFO> |
|
|
1718 | |
|
|
1719 | Set to the terminfo directory iff @@RXVT_NAME@@ was configured with |
|
|
1720 | C<--with-terminfo=PATH>. |
|
|
1721 | |
|
|
1722 | =item B<DISPLAY> |
|
|
1723 | |
|
|
1724 | Used by @@RXVT_NAME@@ to connect to the display and set to the correct |
|
|
1725 | display in its child processes if C<-display> isn't used to override. It |
|
|
1726 | defaults to C<:0> if it doesn't exist. |
|
|
1727 | |
|
|
1728 | =item B<SHELL> |
|
|
1729 | |
|
|
1730 | The shell to be used for command execution, defaults to C</bin/sh>. |
|
|
1731 | |
|
|
1732 | =item B<RXVT_SOCKET> [I<sic>] |
|
|
1733 | |
|
|
1734 | The unix domain socket path used by @@RXVT_NAME@@c(1) and |
|
|
1735 | @@RXVT_NAME@@d(1). |
|
|
1736 | |
|
|
1737 | Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>. |
|
|
1738 | |
|
|
1739 | =item B<URXVT_PERL_LIB> |
|
|
1740 | |
|
|
1741 | Additional F<:>-separated library search path for perl extensions. Will be |
|
|
1742 | searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library |
|
|
1743 | directory. |
|
|
1744 | |
|
|
1745 | =item B<URXVT_PERL_VERBOSITY> |
|
|
1746 | |
|
|
1747 | See L<@@RXVT_NAME@@perl>(3). |
|
|
1748 | |
|
|
1749 | =item B<HOME> |
|
|
1750 | |
|
|
1751 | Used to locate the default directory for the unix domain socket for |
|
|
1752 | daemon communications and to locate various resource files (such as |
|
|
1753 | C<.Xdefaults>) |
|
|
1754 | |
|
|
1755 | =item B<XAPPLRESDIR> |
|
|
1756 | |
|
|
1757 | Directory where application-specific X resource files are located. |
|
|
1758 | |
|
|
1759 | =item B<XENVIRONMENT> |
|
|
1760 | |
|
|
1761 | If set and accessible, gives the name of a X resource file to be loaded by |
|
|
1762 | @@RXVT_NAME@@. |
832 | |
1763 | |
833 | =back |
1764 | =back |
834 | |
1765 | |
835 | =head1 ENVIRONMENT |
|
|
836 | |
|
|
837 | B<@@RXVT_NAME@@> sets the environment variables B<TERM>, B<COLORTERM> |
|
|
838 | and B<COLORFGBG>. The environment variable B<WINDOWID> is set to the X |
|
|
839 | window id number of the B<@@RXVT_NAME@@> window and it also uses and |
|
|
840 | sets the environment variable B<DISPLAY> to specify which display |
|
|
841 | terminal to use. B<@@RXVT_NAME@@> uses the environment variables |
|
|
842 | B<RXVTPATH> and B<PATH> to find XPM files. |
|
|
843 | |
|
|
844 | =head1 FILES |
1766 | =head1 FILES |
845 | |
1767 | |
846 | =over 4 |
1768 | =over 4 |
847 | |
1769 | |
848 | =item B</etc/utmp> |
|
|
849 | |
|
|
850 | System file for login records. |
|
|
851 | |
|
|
852 | =item B</usr/lib/X11/rgb.txt> |
1770 | =item B</usr/lib/X11/rgb.txt> |
853 | |
1771 | |
854 | Color names. |
1772 | Colour names. |
855 | |
1773 | |
856 | =back |
1774 | =back |
857 | |
1775 | |
858 | =head1 FREQUENTLY ASKED QUESTIONS (FAQ) |
1776 | =head1 SEE ALSO |
|
|
1777 | |
|
|
1778 | @@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1), |
|
|
1779 | @@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) |
|
|
1780 | |
|
|
1781 | =head1 CURRENT PROJECT COORDINATOR |
859 | |
1782 | |
860 | =over 4 |
1783 | =over 4 |
861 | |
1784 | |
862 | =item How do I know which rxvt-unicode version I'm using? |
1785 | =item Project Coordinator |
863 | |
1786 | |
864 | The version number is displayed with the usage (-h). For rxvt-unicode |
1787 | Marc A. Lehmann <rxvt-unicode@schmorp.de>. |
865 | version 2.14 and later, the escape sequence C<ESC[8n> sets the window |
|
|
866 | title to the version number. |
|
|
867 | |
1788 | |
868 | =item Mouse cut/paste suddenly no longer works. |
1789 | L<http://software.schmorp.de/pkg/rxvt-unicode.html> |
869 | |
|
|
870 | Make sure that mouse reporting is actually turned off since killing |
|
|
871 | some editors prematurely may leave the mouse in mouse report mode. I've |
|
|
872 | heard that tcsh may use mouse reporting unless it otherwise specified. A |
|
|
873 | quick check is to see if cut/paste works when the Alt or Shift keys are |
|
|
874 | depressed. See @@RXVT_NAME@@(7) |
|
|
875 | |
|
|
876 | =item What's with this bold/blink stuff? |
|
|
877 | |
|
|
878 | If no bold colour is set via C<colorBD:>, bold will invert text using the |
|
|
879 | standard foreground colour. |
|
|
880 | |
|
|
881 | For the standard background colour, blinking will actually make the |
|
|
882 | text blink when compiled with C<--enable-blinking>. with standard |
|
|
883 | colours. Without C<--enable-blinking>, the blink attribute will be |
|
|
884 | ignored. |
|
|
885 | |
|
|
886 | On ANSI colours, bold/blink attributes are used to set high-intensity |
|
|
887 | foreground/background colors. |
|
|
888 | |
|
|
889 | color0-7 are the low-intensity colors. |
|
|
890 | |
|
|
891 | color8-15 are the corresponding high-intensity colors. |
|
|
892 | |
|
|
893 | =item I don't like the screen colors. How do I change them? |
|
|
894 | |
|
|
895 | You can change the screen colors at run-time using F<~/.Xdefaults> |
|
|
896 | resources (or as long-options). |
|
|
897 | |
|
|
898 | Here are values that are supposed to resemble a VGA screen, |
|
|
899 | including the murky brown that passes for low-intensity yellow: |
|
|
900 | |
|
|
901 | Rxvt*color0: #000000 |
|
|
902 | Rxvt*color1: #A80000 |
|
|
903 | Rxvt*color2: #00A800 |
|
|
904 | Rxvt*color3: #A8A800 |
|
|
905 | Rxvt*color4: #0000A8 |
|
|
906 | Rxvt*color5: #A800A8 |
|
|
907 | Rxvt*color6: #00A8A8 |
|
|
908 | Rxvt*color7: #A8A8A8 |
|
|
909 | |
|
|
910 | Rxvt*color8: #000054 |
|
|
911 | Rxvt*color9: #FF0054 |
|
|
912 | Rxvt*color10: #00FF54 |
|
|
913 | Rxvt*color11: #FFFF54 |
|
|
914 | Rxvt*color12: #0000FF |
|
|
915 | Rxvt*color13: #FF00FF |
|
|
916 | Rxvt*color14: #00FFFF |
|
|
917 | Rxvt*color15: #FFFFFF |
|
|
918 | |
|
|
919 | =item What's with the strange Backspace/Delete key behaviour? |
|
|
920 | |
|
|
921 | Assuming that the physical Backspace key corresponds to the |
|
|
922 | BackSpace keysym (not likely for Linux ... see the following |
|
|
923 | question) there are two standard values that can be used for |
|
|
924 | Backspace: C<^H> and C<^?>. |
|
|
925 | |
|
|
926 | Historically, either value is correct, but rxvt-unicode adopts the debian |
|
|
927 | policy of using C<^?> when unsure, because it's the one only only correct |
|
|
928 | choice :). |
|
|
929 | |
|
|
930 | Rxvt-unicode tries to inherit the current stty settings and uses the value |
|
|
931 | of `erase' to guess the value for backspace. If rxvt-unicode wasn't |
|
|
932 | started from a terminal (say, from a menu or by remote shell), then the |
|
|
933 | system value of `erase', which corresponds to CERASE in <termios.h>, will |
|
|
934 | be used (which may not be the same as your stty setting). |
|
|
935 | |
|
|
936 | For starting a new rxvt-unicode: |
|
|
937 | |
|
|
938 | # use Backspace = ^H |
|
|
939 | $ stty erase ^H |
|
|
940 | $ @@RXVT_NAME@@ |
|
|
941 | |
|
|
942 | # use Backspace = ^? |
|
|
943 | $ stty erase ^? |
|
|
944 | $ @@RXVT_NAME@@ |
|
|
945 | |
|
|
946 | Toggle with "ESC[36h" / "ESC[36l" as documented in @@RXVT_NAME@@(7). |
|
|
947 | |
|
|
948 | For an existing rxvt-unicode: |
|
|
949 | |
|
|
950 | # use Backspace = ^H |
|
|
951 | $ stty erase ^H |
|
|
952 | $ echo -n "^[[36h" |
|
|
953 | |
|
|
954 | # use Backspace = ^? |
|
|
955 | $ stty erase ^? |
|
|
956 | $ echo -n "^[[36l" |
|
|
957 | |
|
|
958 | This helps satisfy some of the Backspace discrepancies that occur, but |
|
|
959 | if you use Backspace = C<^H>, make sure that the termcap/terminfo value |
|
|
960 | properly reflects that. |
|
|
961 | |
|
|
962 | The Delete key is a another casualty of the ill-defined Backspace problem. |
|
|
963 | To avoid confusion between the Backspace and Delete keys, the Delete |
|
|
964 | key has been assigned an escape sequence to match the vt100 for Execute |
|
|
965 | (ESC[3~) and is in the supplied termcap/terminfo. |
|
|
966 | |
|
|
967 | Some other Backspace problems: |
|
|
968 | |
|
|
969 | some editors use termcap/terminfo, |
|
|
970 | some editors (vim I'm told) expect Backspace = ^H, |
|
|
971 | GNU Emacs (and Emacs-like editors) use ^H for help. |
|
|
972 | |
|
|
973 | Perhaps someday this will all be resolved in a consistent manner. |
|
|
974 | |
|
|
975 | =item I don't like the key-bindings. How do I change them? |
|
|
976 | |
|
|
977 | There are some compile-time selections available via configure. Unless |
|
|
978 | you have run "configure" with the C<--disable-resources> option you can |
|
|
979 | use the `keysym' resource to alter the keystrings associated with keysym |
|
|
980 | 0xFF00 - 0xFFFF (function, cursor keys, etc). |
|
|
981 | |
|
|
982 | Here's an example for a tn3270 session started using `@@RXVT_NAME@@ -name tn3270' |
|
|
983 | |
|
|
984 | !# ----- special uses ------: |
|
|
985 | ! tn3270 login, remap function and arrow keys. |
|
|
986 | tn3270*font: *clean-bold-*-*--15-* |
|
|
987 | |
|
|
988 | ! keysym - used by rxvt only |
|
|
989 | ! Delete - ^D |
|
|
990 | tn3270*keysym.0xFFFF: \004 |
|
|
991 | |
|
|
992 | ! Home - ^A |
|
|
993 | tn3270*keysym.0xFF50: \001 |
|
|
994 | ! Left - ^B |
|
|
995 | tn3270*keysym.0xFF51: \002 |
|
|
996 | ! Up - ^P |
|
|
997 | tn3270*keysym.0xFF52: \020 |
|
|
998 | ! Right - ^F |
|
|
999 | tn3270*keysym.0xFF53: \006 |
|
|
1000 | ! Down - ^N |
|
|
1001 | tn3270*keysym.0xFF54: \016 |
|
|
1002 | ! End - ^E |
|
|
1003 | tn3270*keysym.0xFF57: \005 |
|
|
1004 | |
|
|
1005 | ! F1 - F12 |
|
|
1006 | tn3270*keysym.0xFFBE: \e1 |
|
|
1007 | tn3270*keysym.0xFFBF: \e2 |
|
|
1008 | tn3270*keysym.0xFFC0: \e3 |
|
|
1009 | tn3270*keysym.0xFFC1: \e4 |
|
|
1010 | tn3270*keysym.0xFFC2: \e5 |
|
|
1011 | tn3270*keysym.0xFFC3: \e6 |
|
|
1012 | tn3270*keysym.0xFFC4: \e7 |
|
|
1013 | tn3270*keysym.0xFFC5: \e8 |
|
|
1014 | tn3270*keysym.0xFFC6: \e9 |
|
|
1015 | tn3270*keysym.0xFFC7: \e0 |
|
|
1016 | tn3270*keysym.0xFFC8: \e- |
|
|
1017 | tn3270*keysym.0xFFC9: \e= |
|
|
1018 | |
|
|
1019 | ! map Prior/Next to F7/F8 |
|
|
1020 | tn3270*keysym.0xFF55: \e7 |
|
|
1021 | tn3270*keysym.0xFF56: \e8 |
|
|
1022 | |
|
|
1023 | =item I'm using keyboard model XXX that has extra Prior/Next/Insert keys. |
|
|
1024 | How do I make use of them? For example, the Sun Keyboard type 4 |
|
|
1025 | has the following mappings that rxvt-unicode doesn't recognize. |
|
|
1026 | |
|
|
1027 | KP_Insert == Insert |
|
|
1028 | F22 == Print |
|
|
1029 | F27 == Home |
|
|
1030 | F29 == Prior |
|
|
1031 | F33 == End |
|
|
1032 | F35 == Next |
|
|
1033 | |
|
|
1034 | Rather than have rxvt-unicode try to accomodate all the various possible keyboard |
|
|
1035 | mappings, it is better to use `xmodmap' to remap the keys as required for |
|
|
1036 | your particular machine. |
|
|
1037 | |
|
|
1038 | =item How do I distinguish if I'm running rxvt-unicode or a regular xterm? |
|
|
1039 | I need this to decide about setting colors etc. |
|
|
1040 | |
|
|
1041 | rxvt and rxvt-unicode always export the variable "COLORTERM", so you can |
|
|
1042 | check and see if that is set. Note that several programs, JED, slrn, |
|
|
1043 | Midnight Commander automatically check this variable to decide whether or |
|
|
1044 | not to use color. |
|
|
1045 | |
|
|
1046 | =item How do I set the correct, full IP address for the DISPLAY variable? |
|
|
1047 | |
|
|
1048 | If you've compiled rxvt-unicode with DISPLAY_IS_IP and ahve enabled |
|
|
1049 | insecure mode then it is possible to use the following shell script |
|
|
1050 | snippets to correctly set the display. If your version of rxvt-unicode |
|
|
1051 | wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then |
|
|
1052 | the COLORTERM variable can be used to distinguish rxvt-unicode from a |
|
|
1053 | regular xterm. |
|
|
1054 | |
|
|
1055 | Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script |
|
|
1056 | snippets: |
|
|
1057 | |
|
|
1058 | # Bourne/Korn/POSIX family of shells: |
|
|
1059 | [ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know |
|
|
1060 | if [ ${TERM:-foo} = xterm ]; then |
|
|
1061 | stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not |
|
|
1062 | echo -n '^[Z' |
|
|
1063 | read term_id |
|
|
1064 | stty icanon echo |
|
|
1065 | if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then |
|
|
1066 | echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string |
|
|
1067 | read DISPLAY # set it in our local shell |
|
|
1068 | fi |
|
|
1069 | fi |
|
|
1070 | |
|
|
1071 | =item How do I compile the manual pages for myself? |
|
|
1072 | |
|
|
1073 | You need to have a recent version of perl installed as F</usr/bin/perl>, |
|
|
1074 | one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to |
|
|
1075 | the doc subdirectory and enter C<make alldoc>. |
|
|
1076 | |
1790 | |
1077 | =back |
1791 | =back |
1078 | |
1792 | |
1079 | =head1 SEE ALSO |
1793 | =head1 AUTHORS |
1080 | |
|
|
1081 | @@RXVT_NAME@@(7), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) |
|
|
1082 | |
|
|
1083 | =head1 BUGS |
|
|
1084 | |
|
|
1085 | Check the BUGS file for an up-to-date list. |
|
|
1086 | |
|
|
1087 | Cursor change support is not yet implemented. |
|
|
1088 | |
|
|
1089 | Click-and-drag doesn't work with X11 mouse report overriding. |
|
|
1090 | |
|
|
1091 | =head1 CURRENT PROJECT COORDINATOR |
|
|
1092 | |
1794 | |
1093 | =over 4 |
1795 | =over 4 |
1094 | |
1796 | |
1095 | =item Project Coordinator |
1797 | =item John Bovey |
1096 | |
1798 | |
1097 | @@RXVTMAINT@@ L<@@RXVT_MAINTEMAIL@@> |
1799 | University of Kent, 1992, wrote the original Xvt. |
1098 | |
1800 | |
1099 | =item Web page maintainter |
1801 | =item Rob Nation <nation@rocket.sanders.lockheed.com> |
1100 | |
1802 | |
1101 | @@RXVTWEBMAINT@@ L<@@RXVT_WEBMAINTEMAIL@@> |
1803 | very heavily modified Xvt and came up with Rxvt |
1102 | |
1804 | |
1103 | L<@@RXVT_WEBPAGE@@> |
1805 | =item Angelo Haritsis <ah@doc.ic.ac.uk> |
|
|
1806 | |
|
|
1807 | wrote the Greek Keyboard Input (no longer in code) |
|
|
1808 | |
|
|
1809 | =item mj olesen <olesen@me.QueensU.CA> |
|
|
1810 | |
|
|
1811 | Wrote the menu system. |
|
|
1812 | |
|
|
1813 | Project Coordinator (changes.txt 2.11 to 2.21) |
|
|
1814 | |
|
|
1815 | =item Oezguer Kesim <kesim@math.fu-berlin.de> |
|
|
1816 | |
|
|
1817 | Project Coordinator (changes.txt 2.21a to 2.4.5) |
|
|
1818 | |
|
|
1819 | =item Geoff Wing <gcw@pobox.com> |
|
|
1820 | |
|
|
1821 | Rewrote screen display and text selection routines. |
|
|
1822 | |
|
|
1823 | Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) |
|
|
1824 | |
|
|
1825 | =item Marc Alexander Lehmann <rxvt-unicode@schmorp.de> |
|
|
1826 | |
|
|
1827 | Forked rxvt-unicode, unicode support, rewrote almost all the code, perl |
|
|
1828 | extension, random hacks, numerous bugfixes and extensions. |
|
|
1829 | |
|
|
1830 | Project Coordinator (Changes 1.0 -) |
|
|
1831 | |
|
|
1832 | =item Emanuele Giaquinta <emanuele.giaquinta@gmail.com> |
|
|
1833 | |
|
|
1834 | pty/utmp code rewrite, image code improvements, many random hacks and bugfixes. |
1104 | |
1835 | |
1105 | =back |
1836 | =back |
1106 | |
1837 | |
1107 | =head1 AUTHORS |
|
|
1108 | |
|
|
1109 | =over 4 |
|
|
1110 | |
|
|
1111 | =item John Bovey |
|
|
1112 | |
|
|
1113 | University of Kent, 1992, wrote the original Xvt. |
|
|
1114 | |
|
|
1115 | =item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> |
|
|
1116 | |
|
|
1117 | very heavily modified Xvt and came up with Rxvt |
|
|
1118 | |
|
|
1119 | =item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> |
|
|
1120 | |
|
|
1121 | wrote the Greek Keyboard Input (no longer in code) |
|
|
1122 | |
|
|
1123 | =item mj olesen L<< <olesen@me.QueensU.CA> >> |
|
|
1124 | |
|
|
1125 | Wrote the menu system. |
|
|
1126 | |
|
|
1127 | Project Coordinator (changes.txt 2.11 to 2.21) |
|
|
1128 | |
|
|
1129 | =item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> |
|
|
1130 | |
|
|
1131 | Project Coordinator (changes.txt 2.21a to 2.4.5) |
|
|
1132 | |
|
|
1133 | =item Geoff Wing L<< <gcw@pobox.com> >> |
|
|
1134 | |
|
|
1135 | Rewrote screen display and text selection routines. Project Coordinator |
|
|
1136 | (changes.txt 2.4.6 - rxvt-unicode) |
|
|
1137 | |
|
|
1138 | =item Marc Alexander Lehmann L<< <rxvt@schmorp.de> >> |
|
|
1139 | |
|
|
1140 | Forked rxvt-unicode, rewrote most of the display code and internal |
|
|
1141 | character handling to store text in unicode, improve xterm |
|
|
1142 | compatibility and apply numerous other bugfixes and extensions. |
|
|
1143 | |
|
|
1144 | Project Coordinator (Changes 1.0 -) |
|
|
1145 | |
|
|
1146 | =back |
|
|
1147 | |
|
|