[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.166 by root, Fri Oct 10 13:23:56 2008 UTC vs.
Revision 1.241 by root, Wed Dec 17 15:22:10 2014 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
149		145
150	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
151	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186		149
187	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
188		151
189	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
190		153
191	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
192		155
193	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
194
195	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197	Compile I<afterimage>: Specify image file for the background and also
198	optionally specify its scaling with a geometry string. Note you may need to
199	add quotes to avoid special shell interpretation of the C<;> in the
200	command-line; for more details see resource B<backgroundPixmap>.
201		157
202	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
203		159
204	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
205		161
…		…
264		220
265	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
266		222
267	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
268		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
269	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
270		230
271	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
272	B<utmpInhibit>.	232	B<utmpInhibit>.
273		233
…		…
315		275
316	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
317		277
318	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
319		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
320	=item B<-iconic>	284	=item B<-iconic>
321		285
322	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
323	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
324		288
…		…
348	=item B<-override-redirect>	312	=item B<-override-redirect>
349		313
350	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
351	B<override-redirect>.	315	B<override-redirect>.
352		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
		321
353	=item B<-sbg>	322	=item B<-sbg>
354		323
355	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
356	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
357	this if you have a good font and want to use its block graphic glyphs;	326	this if you have a good font and want to use its block graphic glyphs;
…		…
360	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
361		330
362	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
363	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
364	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
365		341
366	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
367		343
368	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
369	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
554	You can set and change the resources using X11 tools like B<xrdb>. Many	530	You can set and change the resources using X11 tools like B<xrdb>. Many
555	distribution do also load settings from the B<~/.Xresources> file when X	531	distribution do also load settings from the B<~/.Xresources> file when X
556	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	532	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
557	with later settings overwriting earlier ones:	533	with later settings overwriting earlier ones:
558		534
559	1. system-wide app-defaults file, either locale-dependent OR global
560	2. app-defaults file in $XAPPLRESDIR	535	1. app-defaults file in $XAPPLRESDIR
		536	2. $HOME/.Xdefaults
561	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	537	3. RESOURCE_MANAGER property on root-window of screen 0
562	4. SCREEN_RESOURCES for the current screen	538	4. SCREEN_RESOURCES property on root-window of the current screen
563	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	539	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
564	6. resources specified via -xrm on the commandline	540	6. resources specified via -xrm on the commandline
565		541
566	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	542	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
567	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	543	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
608	Use the specified colour for the colour value I<n>, where 0-7	584	Use the specified colour for the colour value I<n>, where 0-7
609	corresponds to low-intensity (normal) colours and 8-15 corresponds to	585	corresponds to low-intensity (normal) colours and 8-15 corresponds to
610	high-intensity (bold = bright foreground, blink = bright background)	586	high-intensity (bold = bright foreground, blink = bright background)
611	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	587	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
612	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	588	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
613	names used are listed in the B<COLORS AND GRAPHICS> section.	589	names used are listed in the B<COLOURS AND GRAPHICS> section.
614		590
615	Colours higher than 15 cannot be set using resources (yet), but can be	591	Colours higher than 15 cannot be set using resources (yet), but can be
616	changed using an escape command (see @@RXVT_NAME@@(7)).	592	changed using an escape command (see @@RXVT_NAME@@(7)).
617		593
618	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	594	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
629	=item B<colorUL:> I<colour>	605	=item B<colorUL:> I<colour>
630		606
631	Use the specified colour to display underlined characters when the	607	Use the specified colour to display underlined characters when the
632	foreground colour is the default.	608	foreground colour is the default.
633		609
634	=item B<colorRV:> I<colour>
635
636	Use the specified colour as the background for reverse video characters
637	when OPTION_HC is disabled (--disable-frills).
638
639	=item B<underlineColor:> I<colour>	610	=item B<underlineColor:> I<colour>
640		611
641	If set, use the specified colour as the colour for the underline	612	If set, use the specified colour as the colour for the underline
642	itself. If unset, use the foreground colour.	613	itself. If unset, use the foreground colour.
		614
		615	=item B<highlightColor:> I<colour>
		616
		617	If set, use the specified colour as the background for highlighted
		618	characters. If unset, use reverse video.
		619
		620	=item B<highlightTextColor:> I<colour>
		621
		622	If set and highlightColor is set, use the specified colour as the
		623	foreground for highlighted characters.
643		624
644	=item B<cursorColor:> I<colour>	625	=item B<cursorColor:> I<colour>
645		626
646	Use the specified colour for the cursor. The default is to use the	627	Use the specified colour for the cursor. The default is to use the
647	foreground colour; option B<-cr>.	628	foreground colour; option B<-cr>.
…		…
654		635
655	=item B<reverseVideo:> I<boolean>	636	=item B<reverseVideo:> I<boolean>
656		637
657	B<True>: simulate reverse video by foreground and background colours;	638	B<True>: simulate reverse video by foreground and background colours;
658	option B<-rv>. B<False>: regular screen colours [default]; option	639	option B<-rv>. B<False>: regular screen colours [default]; option
659	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	640	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
660		641
661	=item B<jumpScroll:> I<boolean>	642	=item B<jumpScroll:> I<boolean>
662		643
663	B<True>: specify that jump scrolling should be used. When receiving lots	644	B<True>: specify that jump scrolling should be used. When receiving lots
664	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	645	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
678		659
679	B<False>: specify that everything is to be displayed, even	660	B<False>: specify that everything is to be displayed, even
680	if the refresh is too fast for the human eye to read anything (or the	661	if the refresh is too fast for the human eye to read anything (or the
681	monitor to display anything); option B<+ss>.	662	monitor to display anything); option B<+ss>.
682		663
683	=item B<transparent:> I<boolean>
684
685	Turn on/off illusion of a transparent window background.
686
687	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
688	future versions.
689
690	I<Please address all transparency related issues to Sasha Vasko at
691	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
692
693	=item B<fading:> I<number>	664	=item B<fading:> I<number>
694		665
695	Fade the text by the given percentage when focus is lost; option B<-fade>.	666	Fade the text by the given percentage when focus is lost; option B<-fade>.
696		667
697	=item B<fadeColor:> I<colour>	668	=item B<fadeColor:> I<colour>
698		669
699	Fade to this colour, when fading is used (see B<fading:>). The default	670	Fade to this colour, when fading is used (see B<fading:>). The default
700	colour is black; option B<-fadecolor>.	671	colour is black; option B<-fadecolor>.
701		672
702	=item B<tintColor:> I<colour>	673	=item B<iconFile:> I<file>
703		674
704	Tint the transparent background pixmap with the given colour; option	675	Set the application icon pixmap; option B<-icon>.
705	B<-tint>.
706
707	=item B<shading:> I<number>
708
709	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
710	in addition to tinting it; option B<-sh>.
711
712	=item B<blendType:> I<string>
713
714	Specify background blending type; option B<-blt>.
715
716	=item B<blurRadius:> I<number>
717
718	Apply Gaussian Blurr with the specified radius to the transparent
719	background image; option B<-blr>.
720		676
721	=item B<scrollColor:> I<colour>	677	=item B<scrollColor:> I<colour>
722		678
723	Use the specified colour for the scrollbar [default #B2B2B2].	679	Use the specified colour for the scrollbar [default #B2B2B2].
724		680
…		…
729		685
730	=item B<borderColor:> I<colour>	686	=item B<borderColor:> I<colour>
731		687
732	The colour of the border around the text area and between the scrollbar	688	The colour of the border around the text area and between the scrollbar
733	and the text.	689	and the text.
734
735	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
736
737	Use the specified image file for the background and also
738	optionally specify its scaling with a geometry string B<WxH+X+Y>,
739	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
740	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
741	centre (percent). A scale of 0 displays the image with tiling. A scale
742	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
743	an integer number of images in that direction. No image will be magnified
744	beyond 10 times its original size. The maximum permitted scale is 1000.
745	Additional operations can be specified after colon B<:op1:op2...>.
746	Supported operations are:
747
748	tile force background image to be tiled and not scaled. Equivalent to 0x0
749	propscale will scale image keeping proportions
750	auto will scale image to match window size. Equivalent to 100x100
751	hscale will scale image horizontally to the window size
752	vscale will scale image vertically to the window size
753	scale will scale image to match window size
754	root will tile image as if it was a root window background, auto-adjusting
755	whenever terminal window moves
756
757	If used in conjunction with B<-tr> option, the specified pixmap will be
758	blended over transparency image using either alpha-blending, or any
759	other blending type, specified with B<-blt "type"> option.
760
761	=item B<path:> I<path>
762
763	Specify the colon-delimited search path for finding background image files.
764		690
765	=item B<font:> I<fontlist>	691	=item B<font:> I<fontlist>
766		692
767	Select the fonts to be used. This is a comma separated list of font names	693	Select the fonts to be used. This is a comma separated list of font names
768	that are checked in order when trying to find glyphs for characters. The	694	that are checked in order when trying to find glyphs for characters. The
…		…
791	it is named first) and thus defines the character cell grid to be 9 pixels	717	it is named first) and thus defines the character cell grid to be 9 pixels
792	wide and 15 pixels high.	718	wide and 15 pixels high.
793		719
794	The second font is just used to add additional unicode characters not in	720	The second font is just used to add additional unicode characters not in
795	the base font, likewise the third, which is unfortunately non-bold, but	721	the base font, likewise the third, which is unfortunately non-bold, but
796	the bold version of the font does contain less characters, so this is a	722	the bold version of the font does contain fewer characters, so this is a
797	useful supplement.	723	useful supplement.
798		724
799	The third font is an Xft font with aliasing turned off, and the characters	725	The third font is an Xft font with aliasing turned off, and the characters
800	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	726	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
801	contains other characters, but we are not interested in them.	727	contains other characters, but we are not interested in them.
…		…
852	=item B<urgentOnBell:> I<boolean>	778	=item B<urgentOnBell:> I<boolean>
853		779
854	B<True>: set the urgency hint for the wm on receipt of a bell character.	780	B<True>: set the urgency hint for the wm on receipt of a bell character.
855	B<False>: do not set the urgency hint [default].	781	B<False>: do not set the urgency hint [default].
856		782
		783	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		784
857	=item B<visualBell:> I<boolean>	785	=item B<visualBell:> I<boolean>
858		786
859	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	787	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
860	B<False>: no visual bell [default]; option B<+vb>.	788	B<False>: no visual bell [default]; option B<+vb>.
861		789
…		…
863		791
864	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	792	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
865	the shell; option B<-ls>. B<False>: start as a normal sub-shell	793	the shell; option B<-ls>. B<False>: start as a normal sub-shell
866	[default]; option B<+ls>.	794	[default]; option B<+ls>.
867		795
		796	=item B<multiClickTime:> I<number>
		797
		798	Specify the maximum time in milliseconds between multi-click select
		799	events. The default is 500 milliseconds; option B<-mc>.
		800
868	=item B<utmpInhibit:> I<boolean>	801	=item B<utmpInhibit:> I<boolean>
869		802
870	B<True>: inhibit writing record into the system log file B<utmp>;	803	B<True>: inhibit writing record into the system log file B<utmp>;
871	option B<-ut>. B<False>: write record into the system log file B<utmp>	804	option B<-ut>. B<False>: write record into the system log file B<utmp>
872	[default]; option B<+ut>.	805	[default]; option B<+ut>.
…		…
889	=item B<scrollstyle:> I<mode>	822	=item B<scrollstyle:> I<mode>
890		823
891	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	824	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
892	the author's favourite.	825	the author's favourite.
893		826
		827	=item B<thickness:> I<number>
		828
		829	Set the scrollbar width in pixels.
		830
894	=item B<scrollBar:> I<boolean>	831	=item B<scrollBar:> I<boolean>
895		832
896	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	833	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
897	disable the scrollbar; option B<+sb>.	834	disable the scrollbar; option B<+sb>.
898		835
…		…
917	B<False>: do not scroll to bottom when tty receives output; option	854	B<False>: do not scroll to bottom when tty receives output; option
918	B<+si>.	855	B<+si>.
919		856
920	=item B<scrollWithBuffer:> I<boolean>	857	=item B<scrollWithBuffer:> I<boolean>
921		858
922	B<True>: scroll with scrollback buffer when tty receives new lines (and	859	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
923	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	860	try to show the same lines) and B<scrollTtyOutput> is False; option
924	with scrollback buffer when tty receives new lines; option B<+sw>.	861	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		862	new lines; option B<+sw>.
925		863
926	=item B<scrollTtyKeypress:> I<boolean>	864	=item B<scrollTtyKeypress:> I<boolean>
927		865
928	B<True>: scroll to bottom when a non-special key is pressed. Special keys	866	B<True>: scroll to bottom when a non-special key is pressed. Special keys
929	are those which are intercepted by rxvt-unicode for special handling and	867	are those which are intercepted by rxvt-unicode for special handling and
…		…
985	=item B<cursorBlink:> I<boolean>	923	=item B<cursorBlink:> I<boolean>
986		924
987	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	925	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
988	option B<-bc>.	926	option B<-bc>.
989		927
		928	=item B<cursorUnderline:> I<boolean>
		929
		930	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		931	option B<-uc>.
		932
990	=item B<pointerBlank:> I<boolean>	933	=item B<pointerBlank:> I<boolean>
991		934
992	B<True>: blank the pointer when a key is pressed or after a set number	935	B<True>: blank the pointer when a key is pressed or after a set number
993	of seconds of inactivity. B<False>: the pointer is always visible	936	of seconds of inactivity. B<False>: the pointer is always visible
994	[default].	937	[default].
…		…
1007	large number (e.g. C<987654321>) to effectively disable the timeout.	950	large number (e.g. C<987654321>) to effectively disable the timeout.
1008		951
1009	=item B<backspacekey:> I<string>	952	=item B<backspacekey:> I<string>
1010		953
1011	The string to send when the backspace key is pressed. If set to B<DEC>	954	The string to send when the backspace key is pressed. If set to B<DEC>
1012	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	955	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1013	(code 8) - which can be reversed with the appropriate DEC private mode	956	(code 8) - which can be reversed with the appropriate DEC private mode
1014	escape sequence.	957	escape sequence.
1015		958
1016	=item B<deletekey:> I<string>	959	=item B<deletekey:> I<string>
1017		960
…		…
1113	Sets the working directory for the shell (or the command specified via	1056	Sets the working directory for the shell (or the command specified via
1114	B<-e>). The I<path> must be an absolute path and it must exist for	1057	B<-e>). The I<path> must be an absolute path and it must exist for
1115	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1058	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1116	directory will be used; option B<-cd>.	1059	directory will be used; option B<-cd>.
1117		1060
1118	=item B<keysym.>I<sym>: I<string>	1061	=item B<keysym.>I<sym>: I<action>
1119		1062
1120	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1063	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1121	intervening resource name B<keysym.> cannot be omitted.	1064	resource name B<keysym.> cannot be omitted.
1122		1065
1123	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1066	Using this resource, you can map key combinations such as
1124	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1067	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1125	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1068	string than would normally result from that combination, making the
1126	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1069	terminal scroll up or down the way you want it, or any other thing an
1127	B<2>, B<3>, B<4>, B<5>.	1070	extension might provide.
		1071
		1072	The key combination that triggers the action, I<sym>, has the following format:
		1073
		1074	(modifiers-)key
		1075
		1076	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1077	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1078	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1079	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1128		1080
1129	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1081	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1130	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1082	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1131	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1083	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1132	current application keymap mode state.	1084	current application keymap mode state.
1133		1085
1134	The spellings of I<key> can be obtained by using B<xev>(1) command or	1086	Due the the large number of modifier combinations, a key mapping will
1135	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1087	match if I<at least> the specified identifiers are being set, and no other
		1088	key mappings with those and more bits are being defined. That means that
		1089	defining a mapping for C<a> will automatically provide definitions for
		1090	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1091	themselves. See the C<builtin:> action, below, for a way to work around
		1092	this when this is a problem.
		1093
		1094	The spelling of I<key> depends on your implementation of X. An easy way to
		1095	find a key name is to use the B<xev>(1) command. You can find a list by
		1096	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1136	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1097	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1137	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1098	value (B<0x0000 - 0xFFFF>).
1138	performed in an exact manner; however, the closest match is assured.
1139		1099
1140	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1100	As with any resource value, the I<action> string may contain backslash
		1101	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1141	number), see RESOURCES in C<man 7 X> for futher details.	1102	number), see RESOURCES in C<man 7 X> for further details.
1142		1103
1143	You can define a range of keysyms in one shot by providing a I<string>	1104	An action starts with an action prefix that selects a certain type
1144	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1105	of action, followed by a colon. An action string without colons is
		1106	interpreted as a literal string to pass to the tty (as if it was
		1107	prefixed with C<string:>).
		1108
		1109	The following action prefixes are known - extensions can provide
		1110	additional prefixes:
		1111
		1112	=over 4
		1113
		1114	=item string:STRING
		1115
		1116	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1117	then the remaining C<STRING> will be passed to the program running in the
		1118	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1119	string C<echo rm -rf /> followed by a newline:
		1120
		1121	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1122
		1123	This could in theory be used to completely redefine your keymap.
		1124
		1125	In addition, for actions of this type, you can define a range of
		1126	keysyms in one shot by loading the C<keysym-list> perl extension and
		1127	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1145	should be a character not used by the strings.	1128	the delimiter `/' should be a character not used by the strings.
1146		1129
1147	Its usage can be demonstrated by an example:	1130	Its usage can be demonstrated by an example:
1148		1131
1149	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1132	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1150		1133
1151	The above line is equivalent to the following three lines:	1134	The above line is equivalent to the following three lines:
1152		1135
1153	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1136	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1154	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1137	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1155	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1138	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1156		1139
		1140	=item command:STRING
		1141
1157	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1142	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1158	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1143	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1144	the opposite of C<string:> - instead of sending it to the program running
		1145	in the terminal, it will be treated as if it were program output). This is
		1146	most useful to feed command sequences into @@RXVT_NAME@@.
		1147
1159	example the following means "change the current locale to C<zh_CN.GBK>	1148	For example the following means "change the current locale to C<zh_CN.GBK>
1160	when Control-Meta-c is being pressed":	1149	when Control-Meta-c is being pressed":
1161		1150
1162	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1151	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1163		1152
1164	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1153	The following example will map Control-Meta-1 and Control-Meta-2 to
1165	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1154	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1166	manpage. For example, the F<selection> extension (activated via	1155	font-switching at runtime:
1167	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1168		1156
1169	URxvt.keysym.M-C-c: perl:selection:rot13	1157	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1158	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1170		1159
1171	Due the the large number of modifier combinations, a defined key mapping	1160	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1172	will match if at I<at least> the specified identifiers are being set, and	1161	info):
1173	no other key mappings with those and more bits are being defined. That
1174	means that defining a key map for C<a> will automatically provide
1175	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1176	mappings themselves.
1177		1162
1178	Unfortunately, this will override built-in key mappings. For example	1163	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1164	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1165
		1166	=item builtin:
		1167
		1168	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1169	key binding existed for the key combination. The obvious use is to undo
		1170	the effect of existing bindings. The not so obvious use is to reinstate
		1171	bindings when another binding overrides too many modifiers.
		1172
1179	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1173	For example if you overwrite the C<Insert> key you will disable
1180	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1174	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1181	user-defined keymap using the C<builtin:> replacement:	1175	"holes" into the user-defined keymap using the C<builtin:> replacement:
1182		1176
1183	URxvt.keysym.Insert: <my insert key sequence>	1177	URxvt.keysym.Insert: <my insert key sequence>
1184	URxvt.keysym.S-Insert: builtin:	1178	URxvt.keysym.S-Insert: builtin:
1185		1179
1186	The first line defines a mapping for C<Insert> and I<any> combination	1180	The first line defines a mapping for C<Insert> and I<any> combination
1187	of modifiers. The second line re-establishes the default mapping for	1181	of modifiers. The second line re-establishes the default mapping for
1188	C<Shift-Insert>.	1182	C<Shift-Insert>.
1189		1183
1190	The following example will map Control-Meta-1 and Control-Meta-2 to	1184	=item builtin-string:
1191	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1192	font-switching at runtime:
1193		1185
1194	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1186	This action is mainly useful to restore string mappings for keys that
1195	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1187	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1188	difficult to explain - basically, this action will send the string to the
		1189	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1190	action for it.
1196		1191
1197	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1192	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1198	info):	1193	selection when you press C<Shift-Insert>. With the following bindings, it
		1194	would instead emit the (undocumented, but what applications running in the
		1195	terminal might expect) sequence C<ESC [ 2 $> instead:
1199		1196
1200	URxvt.keysym.M-C-3: command:\033[8;25;80t	1197	URxvt.keysym.S-Insert: builtin-string:
1201	URxvt.keysym.M-C-4: command:\033[8;48;110t	1198	URxvt.keysym.C-S-Insert: builtin:
		1199
		1200	The first line disables the paste functionality for that key
		1201	combination, and the second reinstates the default behaviour for
		1202	C<Control-Shift-Insert>, which would otherwise be overridden.
		1203
		1204	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1205	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1206	this:
		1207
		1208	URxvt.keysym.C-M-c: builtin-string:
		1209	URxvt.keysym.C-M-v: builtin-string:
		1210
		1211	=item EXTENSION:STRING
		1212
		1213	An action of this form invokes the action B<STRING>, if any, provided
		1214	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1215	be loaded automatically if necessary.
		1216
		1217	Not all extensions define actions, but popular extensions that do
		1218	include the I<selection> and I<matcher> extensions (documented in their
		1219	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1220	respectively).
		1221
		1222	From the silly examples department, this will rot13-"encrypt"
		1223	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1224	keyboards:
		1225
		1226	URxvt.keysym.M-C-c: selection:rot13
		1227
		1228	=item perl:STRING DEPRECATED
		1229
		1230	This is a deprecated way of invoking commands provided by perl
		1231	extensions. It is still supported, but should not be used anymore.
		1232
		1233	=back
1202		1234
1203	=item B<perl-ext-common>: I<string>	1235	=item B<perl-ext-common>: I<string>
1204		1236
1205	=item B<perl-ext>: I<string>	1237	=item B<perl-ext>: I<string>
1206		1238
…		…
1208	use in this terminal instance; option B<-pe>.	1240	use in this terminal instance; option B<-pe>.
1209		1241
1210	Extension names can be prefixed with a C<-> sign to prohibit using	1242	Extension names can be prefixed with a C<-> sign to prohibit using
1211	them. This can be useful to selectively disable some extensions loaded	1243	them. This can be useful to selectively disable some extensions loaded
1212	by default, or specified via the C<perl-ext-common> resource. For	1244	by default, or specified via the C<perl-ext-common> resource. For
1213	example, C<default,-selection> will use all the default extension except	1245	example, C<default,-selection> will use all the default extensions except
1214	C<selection>.	1246	C<selection>.
1215		1247
1216	Extension names can also be followed by an argument in angle brackets	1248	The default set includes the C<selection>, C<option-popup>,
1217	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1249	C<selection-popup> and C<readline> extensions, any extensions that
1218	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1250	define keybindings via C<BINDING> meta comments, and extensions which
1219	multiple times with different arguments will pass multiple arguments to	1251	are mentioned in B<keysym> resources.
1220	the extension.	1252
		1253	Any extension such that a corresponding resource is given on the
		1254	command line is automatically appended to B<perl-ext>.
1221		1255
1222	Each extension is looked up in the library directories, loaded if	1256	Each extension is looked up in the library directories, loaded if
1223	necessary, and bound to the current terminal instance.	1257	necessary, and bound to the current terminal instance. When the library
		1258	search path contains multiple extension files of the same name, then the
		1259	first one found will be used.
1224		1260
1225	If both of these resources are the empty string, then the perl	1261	If both of these resources are the empty string, then the perl interpreter
1226	interpreter will not be initialized. The idea behind two options is that	1262	will not be initialized. The rationale for having two options is that
1227	B<perl-ext-common> will be used for extensions that should be available to	1263	B<perl-ext-common> will be used for extensions that should be available to
1228	all instances, while B<perl-ext> is used for specific instances.	1264	all instances, while B<perl-ext> is used for specific instances.
1229		1265
1230	=item B<perl-eval>: I<string>	1266	=item B<perl-eval>: I<string>
1231		1267
…		…
1233	the @@RXVT_NAME@@perl(3) manpage.	1269	the @@RXVT_NAME@@perl(3) manpage.
1234		1270
1235	=item B<perl-lib>: I<path>	1271	=item B<perl-lib>: I<path>
1236		1272
1237	Colon-separated list of additional directories that hold extension	1273	Colon-separated list of additional directories that hold extension
1238	scripts. When looking for extensions specified by the C<perl> resource,	1274	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239	@@RXVT_NAME@@ will first look in these directories and then in	1275	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1276	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241		1277
1242	See the @@RXVT_NAME@@perl(3) manpage.	1278	See the @@RXVT_NAME@@perl(3) manpage.
1243		1279
1244	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1280	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1245		1281
…		…
1249	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1285	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1250		1286
1251	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1287	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1252	for details.	1288	for details.
1253		1289
1254	=item B<searchable-scrollback:> I<keysym>	1290	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1255		1291
1256	Sets the hotkey that starts the incremental scrollback buffer search	1292	This resource is deprecated and will be removed. Use a B<keysym> resource
1257	(default: C<M-s>).	1293	instead, e.g.:
1258		1294
		1295	URxvt.keysym.M-s: searchable-scrollback:start
		1296
1259	=item B<urlLauncher>: I<string>	1297	=item B<url-launcher>: I<string>
1260		1298
1261	Specifies the program to be started with a URL argument. Used by the	1299	Specifies the program to be started with a URL argument. Used by the
1262	C<selection-popup> and C<matcher> perl extensions.	1300	C<selection-popup> and C<matcher> perl extensions.
1263		1301
1264	=item B<transient-for>: I<windowid>	1302	=item B<transient-for>: I<windowid>
…		…
1268	=item B<override-redirect>: I<boolean>	1306	=item B<override-redirect>: I<boolean>
1269		1307
1270	Compile I<frills>: Sets override-redirect for the terminal window, making	1308	Compile I<frills>: Sets override-redirect for the terminal window, making
1271	it almost invisible to window managers; option B<-override-redirect>.	1309	it almost invisible to window managers; option B<-override-redirect>.
1272		1310
		1311	=item B<iso14755:> I<boolean>
		1312
		1313	Turn on/off ISO 14755 (default enabled).
		1314
1273	=item B<iso14755_52:> I<boolean>	1315	=item B<iso14755_52:> I<boolean>
1274		1316
1275	Turn on/off ISO 14755 5.2 mode (default enabled).	1317	Turn on/off ISO 14755 5.2 mode (default enabled).
		1318
		1319	=back
		1320
		1321	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1322
		1323	=over 4
		1324
		1325	=item B<-pixmap> I<file[;oplist]>
		1326
		1327	=item B<backgroundPixmap:> I<file[;oplist]>
		1328
		1329	Compile I<pixbuf>: Use the specified image file as the window's
		1330	background and also optionally specify a colon separated list of
		1331	operations to modify it. Note that you may need to quote the C<;>
		1332	character when using the command line option, as C<;> is usually a
		1333	metacharacter in shells. Supported operations are:
		1334
		1335	=over 4
		1336
		1337	=item B<WxH+X+Y>
		1338
		1339	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1340	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1341	scale of 0 disables scaling.
		1342
		1343	=item B<op=tile>
		1344
		1345	enables tiling
		1346
		1347	=item B<op=keep-aspect>
		1348
		1349	maintain the image aspect ratio when scaling
		1350
		1351	=item B<op=root-align>
		1352
		1353	use the position of the terminal window relative to the root window as
		1354	the image offset, simulating a root window background
		1355
		1356	=back
		1357
		1358	The default scale and position setting is C<100x100+50+50>.
		1359	Alternatively, a predefined set of templates can be used to achieve
		1360	the most common setups:
		1361
		1362	=over 4
		1363
		1364	=item B<style=tiled>
		1365
		1366	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1367
		1368	=item B<style=aspect-stretched>
		1369
		1370	the image is scaled to fill the whole window maintaining the aspect
		1371	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1372
		1373	=item B<style=stretched>
		1374
		1375	the image is scaled to fill the whole window. Equivalent to 100x100
		1376
		1377	=item B<style=centered>
		1378
		1379	the image is centered with no scaling. Equivalent to 0x0+50+50
		1380
		1381	=item B<style=root-tiled>
		1382
		1383	the image is tiled with no scaling and using 'root' positioning.
		1384	Equivalent to 0x0:op=tile:op=root-align
		1385
		1386	=back
		1387
		1388	If multiple templates are specified the last one wins. Note that a
		1389	template overrides all the scale, position and operations settings.
		1390
		1391	If used in conjunction with pseudo-transparency, the specified pixmap
		1392	will be blended over the transparent background using alpha-blending.
		1393
		1394	=item B<-tr>\|B<+tr>
		1395
		1396	=item B<transparent:> I<boolean>
		1397
		1398	Turn on/off pseudo-transparency by using the root pixmap as background.
		1399
		1400	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1401	will be removed in future versions.
		1402
		1403	=item B<-tint> I<colour>
		1404
		1405	=item B<tintColor:> I<colour>
		1406
		1407	Tint the transparent background with the given colour. Note that a
		1408	black tint yields a completely black image while a white tint yields
		1409	the image unchanged.
		1410
		1411	=item B<-sh> I<number>
		1412
		1413	=item B<shading:> I<number>
		1414
		1415	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1416	A value of 100 means no shading.
		1417
		1418	=item B<-blr> I<HxV>
		1419
		1420	=item B<blurRadius:> I<HxV>
		1421
		1422	Apply gaussian blur with the specified radius to the transparent
		1423	background. If a single number is specified, the vertical and
		1424	horizontal radii are considered to be the same. Setting one of the
		1425	radii to 1 and the other to a large number creates interesting effects
		1426	on some backgrounds. The maximum radius value is 128. An horizontal or
		1427	vertical radius of 0 disables blurring.
		1428
		1429	=item B<path:> I<path>
		1430
		1431	Specify the colon-delimited search path for finding background image files.
1276		1432
1277	=back	1433	=back
1278		1434
1279	=head1 THE SCROLLBAR	1435	=head1 THE SCROLLBAR
1280		1436
…		…
1328	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1484	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1329	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1485	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1330		1486
1331	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1487	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1332	inserted too.	1488	inserted too.
		1489
		1490	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1491	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1492	binding causes the value of the internal selection to be copied to the
		1493	CLIPBOARD selection, while the second binding causes the value of the
		1494	CLIPBOARD selection to be inserted.
1333		1495
1334	=back	1496	=back
1335		1497
1336	=head1 CHANGING FONTS	1498	=head1 CHANGING FONTS
1337		1499
…		…
1419	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1581	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1420	it can be seen via the I<who(1)> command, and can accept messages. To	1582	it can be seen via the I<who(1)> command, and can accept messages. To
1421	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1583	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1422	on some systems or setgid to root or to some other group on others.	1584	on some systems or setgid to root or to some other group on others.
1423		1585
1424	=head1 COLORS AND GRAPHICS	1586	=head1 COLOURS AND GRAPHICS
1425		1587
1426	In addition to the default foreground and background colours,	1588	In addition to the default foreground and background colours,
1427	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1589	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1428	high-intensity bold/blink versions of the same). Here is a list of the	1590	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1429	colours with their names.	1591	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1592	cube plus a 8 (24) colour greyscale ramp.
		1593
		1594	Here is a list of the ANSI colours with their names.
1430		1595
1431	=begin table	1596	=begin table
1432		1597
1433	B<color0> (black) = Black	1598	B<color0> (black) = Black
1434	B<color1> (red) = Red3	1599	B<color1> (red) = Red3
…		…
1454	It is also possible to specify the colour values of B<foreground>,	1619	It is also possible to specify the colour values of B<foreground>,
1455	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1620	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1456	a number 0-15, as a convenient shorthand to reference the colour name of	1621	a number 0-15, as a convenient shorthand to reference the colour name of
1457	color0-color15.	1622	color0-color15.
1458		1623
1459	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1624	The following text gives values for the standard 88 colour mode (and
1460	additional 72 colours. The first 64 of those (with indices 16 to 79)	1625	values for the 256 colour mode in parentheses).
1461	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1462	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1463		1626
		1627	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1628
		1629	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1630	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1631
		1632	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1633	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1634	the RGB cube.
		1635
1464	Together, all those colours implement the 88 colour xterm colours. Only	1636	Together, all those colours implement the 88 (256) colour xterm
1465	the first 16 can be changed using resources currently, the rest can only	1637	colours. Only the first 16 can be changed using resources currently, the
1466	be changed via command sequences ("escape codes").	1638	rest can only be changed via command sequences ("escape codes").
		1639
		1640	Applications are advised to use terminfo or command sequences to discover
		1641	number and RGB values of all colours (yes, you can query this...).
1467		1642
1468	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1643	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1469	always swapping the foreground/background colours. This is in contrast to	1644	always swapping the foreground/background colours. This is in contrast to
1470	I<xterm>(1) where the colours are only swapped if they have not otherwise	1645	I<xterm>(1) where the colours are only swapped if they have not otherwise
1471	been specified. For example,	1646	been specified. For example,
1472		1647
1473	=over 4
1474
1475	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1648	@@RXVT_NAME@@ -fg Black -bg White -rv
1476		1649
1477	would yield White on Black, while on I<xterm>(1) it would yield Black	1650	would yield White on Black, while on I<xterm>(1) it would yield Black on
1478	on White.	1651	White.
1479
1480	=back
1481		1652
1482	=head2 ALPHA CHANNEL SUPPORT	1653	=head2 ALPHA CHANNEL SUPPORT
1483		1654
1484	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1655	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1485	their act together, rxvt-unicode will do it's own alpha channel management:	1656	their act together, rxvt-unicode will do its own alpha channel management:
1486		1657
1487	You can prefix any color with an opaquenes percentage enclosed in	1658	You can prefix any colour with an opaqueness percentage enclosed in
1488	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1659	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1489	(0-100) that specifies the opacity of the color, where C<0> is completely	1660	(0-100) that specifies the opacity of the colour, where C<0> is completely
1490	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1661	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1491	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1662	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1492	is the recommended format to specify transparency values, and works with	1663	is the recommended format to specify transparency values, and works with
1493	all ways to specify a colour.	1664	all ways to specify a colour.
1494		1665
…		…
1572		1743
1573	=item B<SHELL>	1744	=item B<SHELL>
1574		1745
1575	The shell to be used for command execution, defaults to C</bin/sh>.	1746	The shell to be used for command execution, defaults to C</bin/sh>.
1576		1747
1577	=item B<RXVT_SOCKET>	1748	=item B<RXVT_SOCKET> [I<sic>]
1578		1749
1579	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1750	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1580	@@RXVT_NAME@@d(1).	1751	@@RXVT_NAME@@d(1).
1581		1752
1582	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1753	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1754
		1755	=item B<URXVT_PERL_LIB>
		1756
		1757	Additional F<:>-separated library search path for perl extensions. Will be
		1758	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1759	directory.
		1760
		1761	=item B<URXVT_PERL_VERBOSITY>
		1762
		1763	See L<@@RXVT_NAME@@perl>(3).
1583		1764
1584	=item B<HOME>	1765	=item B<HOME>
1585		1766
1586	Used to locate the default directory for the unix domain socket for	1767	Used to locate the default directory for the unix domain socket for
1587	daemon communications and to locate various resource files (such as	1768	daemon communications and to locate various resource files (such as
1588	C<.Xdefaults>)	1769	C<.Xdefaults>)
1589		1770
1590	=item B<XAPPLRESDIR>	1771	=item B<XAPPLRESDIR>
1591		1772
1592	Directory where various X resource files are being located.	1773	Directory where application-specific X resource files are located.
1593		1774
1594	=item B<XENVIRONMENT>	1775	=item B<XENVIRONMENT>
1595		1776
1596	If set and accessible, gives the name of a X resource file to be loaded by	1777	If set and accessible, gives the name of a X resource file to be loaded by
1597	@@RXVT_NAME@@.	1778	@@RXVT_NAME@@.
…		…
1602		1783
1603	=over 4	1784	=over 4
1604		1785
1605	=item B</usr/lib/X11/rgb.txt>	1786	=item B</usr/lib/X11/rgb.txt>
1606		1787
1607	Color names.	1788	Colour names.
1608		1789
1609	=back	1790	=back
1610		1791
1611	=head1 SEE ALSO	1792	=head1 SEE ALSO
1612		1793
		1794	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1613	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1795	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1614		1796
1615	=head1 CURRENT PROJECT COORDINATOR	1797	=head1 CURRENT PROJECT COORDINATOR
1616		1798
1617	=over 4	1799	=over 4
1618		1800
1619	=item Project Coordinator	1801	=item Project Coordinator
1620		1802
1621	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1803	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1622		1804
1623	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1805	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1624		1806
1625	=back	1807	=back
1626		1808
…		…
1630		1812
1631	=item John Bovey	1813	=item John Bovey
1632		1814
1633	University of Kent, 1992, wrote the original Xvt.	1815	University of Kent, 1992, wrote the original Xvt.
1634		1816
1635	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1817	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1636		1818
1637	very heavily modified Xvt and came up with Rxvt	1819	very heavily modified Xvt and came up with Rxvt
1638		1820
1639	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1821	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1640		1822
1641	wrote the Greek Keyboard Input (no longer in code)	1823	wrote the Greek Keyboard Input (no longer in code)
1642		1824
1643	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1825	=item mj olesen <olesen@me.QueensU.CA>
1644		1826
1645	Wrote the menu system.	1827	Wrote the menu system.
1646		1828
1647	Project Coordinator (changes.txt 2.11 to 2.21)	1829	Project Coordinator (changes.txt 2.11 to 2.21)
1648		1830
1649	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1831	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1650		1832
1651	Project Coordinator (changes.txt 2.21a to 2.4.5)	1833	Project Coordinator (changes.txt 2.21a to 2.4.5)
1652		1834
1653	=item Geoff Wing L<< <gcw@pobox.com> >>	1835	=item Geoff Wing <gcw@pobox.com>
1654		1836
1655	Rewrote screen display and text selection routines.	1837	Rewrote screen display and text selection routines.
1656		1838
1657	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1839	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1658		1840
1659	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1841	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1660		1842
1661	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1843	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1662	extension, random hacks, numerous bugfixes and extensions.	1844	extension, random hacks, numerous bugfixes and extensions.
1663		1845
1664	Project Coordinator (Changes 1.0 -)	1846	Project Coordinator (Changes 1.0 -)
1665		1847
1666	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1848	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1667		1849
1668	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1850	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1669		1851
1670	=back	1852	=back
1671		1853

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.166 by root, Fri Oct 10 13:23:56 2008 UTC vs. Revision 1.241 by root, Wed Dec 17 15:22:10 2014 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.166 by root, Fri Oct 10 13:23:56 2008 UTC vs.
Revision 1.241 by root, Wed Dec 17 15:22:10 2014 UTC