[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs.
Revision 1.244 by sf-exg, Tue Jun 16 11:58:26 2015 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
321		275
322	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
323		277
324	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
325		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
326	=item B<-iconic>	284	=item B<-iconic>
327		285
328	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
329	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
330		288
…		…
354	=item B<-override-redirect>	312	=item B<-override-redirect>
355		313
356	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
357	B<override-redirect>.	315	B<override-redirect>.
358		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
		321
359	=item B<-sbg>	322	=item B<-sbg>
360		323
361	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
362	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
363	this if you have a good font and want to use its block graphic glyphs;	326	this if you have a good font and want to use its block graphic glyphs;
…		…
366	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
367		330
368	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
369	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
370	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
371		341
372	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
373		343
374	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
375	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
410	=item B<-pt> I<style>	380	=item B<-pt> I<style>
411		381
412	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
413	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
414		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
415	=item B<-im> I<text>	388	=item B<-im> I<text>
416		389
417	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
418		391
419	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
560	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
561	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
562	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
563	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
564		537
565	1. system-wide app-defaults file, either locale-dependent OR global
566	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
567	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
568	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
569	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
570	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
571		544
572	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
573	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
614	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
615	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
616	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
617	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
618	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
619	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
620		593
621	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
622	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
623		596
624	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
635	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
636		609
637	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
638	foreground colour is the default.	611	foreground colour is the default.
639		612
640	=item B<colorRV:> I<colour>
641
642	Use the specified colour as the background for reverse video characters
643	when OPTION_HC is disabled (--disable-frills).
644
645	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
646		614
647	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
648	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
649		627
650	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
651		629
652	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
653	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
660		638
661	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
662		640
663	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
664	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
665	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
666		644
667	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
668		646
669	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
670	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
684		662
685	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
686	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
687	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
688		666
689	=item B<transparent:> I<boolean>
690
691	Turn on/off illusion of a transparent window background.
692
693	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
694	future versions.
695
696	I<Please address all transparency related issues to Sasha Vasko at
697	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
698
699	=item B<fading:> I<number>	667	=item B<fading:> I<number>
700		668
701	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
702		670
703	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
704		672
705	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
706	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
707		675
708	=item B<tintColor:> I<colour>
709
710	Tint the transparent background pixmap with the given colour; option
711	B<-tint>.
712
713	=item B<shading:> I<number>
714
715	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
716	in addition to tinting it; option B<-sh>.
717
718	=item B<blendType:> I<string>
719
720	Specify background blending type; option B<-blt>.
721
722	=item B<blurRadius:> I<number>
723
724	Apply gaussian blur with the specified radius to the transparent
725	background image; option B<-blr>.
726
727	=item B<iconFile:> I<file>	676	=item B<iconFile:> I<file>
728		677
729	Set the application icon pixmap; option B<-icon>.	678	Set the application icon pixmap; option B<-icon>.
730		679
731	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
…		…
739		688
740	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
741		690
742	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
743	and the text.	692	and the text.
744
745	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
746
747	Use the specified image file for the background and also
748	optionally specify its scaling with a geometry string B<WxH+X+Y>,
749	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
750	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
751	centre (percent). A scale of 0 displays the image with tiling. A scale
752	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
753	an integer number of images in that direction. No image will be magnified
754	beyond 10 times its original size. The maximum permitted scale is 1000.
755	Additional operations can be specified after colon B<:op1:op2...>.
756	Supported operations are:
757
758	tile force background image to be tiled and not scaled. Equivalent to 0x0
759	propscale will scale image keeping proportions
760	auto will scale image to match window size. Equivalent to 100x100
761	hscale will scale image horizontally to the window size
762	vscale will scale image vertically to the window size
763	scale will scale image to match window size
764	root will tile image as if it was a root window background, auto-adjusting
765	whenever terminal window moves
766
767	If used in conjunction with B<-tr> option, the specified pixmap will be
768	blended over transparency image using either alpha-blending, or any
769	other blending type, specified with B<-blt "type"> option.
770
771	=item B<path:> I<path>
772
773	Specify the colon-delimited search path for finding background image files.
774		693
775	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
776		695
777	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
778	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
801	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
802	wide and 15 pixels high.	721	wide and 15 pixels high.
803		722
804	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
805	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
806	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
807	useful supplement.	726	useful supplement.
808		727
809	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
810	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
811	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
875		794
876	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
877	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
878	[default]; option B<+ls>.	797	[default]; option B<+ls>.
879		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
880	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
881		805
882	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
883	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
884	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
901	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
902		826
903	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
904	the author's favourite.	828	the author's favourite.
905		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
906	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
907		835
908	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
909	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
910		838
…		…
929	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
930	B<+si>.	858	B<+si>.
931		859
932	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
933		861
934	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
935	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
936	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
937		866
938	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
939		868
940	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
941	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
…		…
997	=item B<cursorBlink:> I<boolean>	926	=item B<cursorBlink:> I<boolean>
998		927
999	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	928	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
1000	option B<-bc>.	929	option B<-bc>.
1001		930
		931	=item B<cursorUnderline:> I<boolean>
		932
		933	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		934	option B<-uc>.
		935
1002	=item B<pointerBlank:> I<boolean>	936	=item B<pointerBlank:> I<boolean>
1003		937
1004	B<True>: blank the pointer when a key is pressed or after a set number	938	B<True>: blank the pointer when a key is pressed or after a set number
1005	of seconds of inactivity. B<False>: the pointer is always visible	939	of seconds of inactivity. B<False>: the pointer is always visible
1006	[default].	940	[default].
…		…
1011		945
1012	=item B<pointerColor2:> I<colour>	946	=item B<pointerColor2:> I<colour>
1013		947
1014	Mouse pointer background colour.	948	Mouse pointer background colour.
1015		949
		950	=item B<pointerShape:> I<string>
		951
		952	Compile I<frills>: Specifies the name of the mouse pointer shape
		953	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		954	file for possible values (omit the C<XC_> prefix).
		955
1016	=item B<pointerBlankDelay:> I<number>	956	=item B<pointerBlankDelay:> I<number>
1017		957
1018	Specifies number of seconds before blanking the pointer [default 2]. Use a	958	Specifies number of seconds before blanking the pointer [default 2]. Use a
1019	large number (e.g. C<987654321>) to effectively disable the timeout.	959	large number (e.g. C<987654321>) to effectively disable the timeout.
1020		960
1021	=item B<backspacekey:> I<string>	961	=item B<backspacekey:> I<string>
1022		962
1023	The string to send when the backspace key is pressed. If set to B<DEC>	963	The string to send when the backspace key is pressed. If set to B<DEC>
1024	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	964	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1025	(code 8) - which can be reversed with the appropriate DEC private mode	965	(code 8) - which can be reversed with the appropriate DEC private mode
1026	escape sequence.	966	escape sequence.
1027		967
1028	=item B<deletekey:> I<string>	968	=item B<deletekey:> I<string>
1029		969
…		…
1046		986
1047	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	987	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1048		988
1049	=item B<preeditType:> I<style>	989	=item B<preeditType:> I<style>
1050		990
1051	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	991	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1052		992
1053	=item B<inputMethod:> I<name>	993	=item B<inputMethod:> I<name>
1054		994
1055	I<name> of inputMethod to use; option B<-im>.	995	I<name> of inputMethod to use; option B<-im>.
1056		996
…		…
1125	Sets the working directory for the shell (or the command specified via	1065	Sets the working directory for the shell (or the command specified via
1126	B<-e>). The I<path> must be an absolute path and it must exist for	1066	B<-e>). The I<path> must be an absolute path and it must exist for
1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1067	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1128	directory will be used; option B<-cd>.	1068	directory will be used; option B<-cd>.
1129		1069
1130	=item B<keysym.>I<sym>: I<string>	1070	=item B<keysym.>I<sym>: I<action>
1131		1071
1132	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1072	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1133	intervening resource name B<keysym.> cannot be omitted.	1073	resource name B<keysym.> cannot be omitted.
1134		1074
1135	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1075	Using this resource, you can map key combinations such as
1136	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1076	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1137	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1077	string than would normally result from that combination, making the
1138	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1078	terminal scroll up or down the way you want it, or any other thing an
1139	B<2>, B<3>, B<4>, B<5>.	1079	extension might provide.
		1080
		1081	The key combination that triggers the action, I<sym>, has the following format:
		1082
		1083	(modifiers-)key
		1084
		1085	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1086	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1087	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1088	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1140		1089
1141	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1090	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1142	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1091	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1143	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1092	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1144	current application keymap mode state.	1093	current application keymap mode state.
1145		1094
1146	The spellings of I<key> can be obtained by using B<xev>(1) command or	1095	Due the the large number of modifier combinations, a key mapping will
1147	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1096	match if I<at least> the specified identifiers are being set, and no other
		1097	key mappings with those and more bits are being defined. That means that
		1098	defining a mapping for C<a> will automatically provide definitions for
		1099	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1100	themselves. See the C<builtin:> action, below, for a way to work around
		1101	this when this is a problem.
		1102
		1103	The spelling of I<key> depends on your implementation of X. An easy way to
		1104	find a key name is to use the B<xev>(1) command. You can find a list by
		1105	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1148	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1106	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1149	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1107	value (B<0x0000 - 0xFFFF>).
1150	performed in an exact manner; however, the closest match is assured.
1151		1108
1152	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1109	As with any resource value, the I<action> string may contain backslash
		1110	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1153	number), see RESOURCES in C<man 7 X> for futher details.	1111	number), see RESOURCES in C<man 7 X> for further details.
1154		1112
1155	You can define a range of keysyms in one shot by providing a I<string>	1113	An action starts with an action prefix that selects a certain type
1156	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1114	of action, followed by a colon. An action string without colons is
		1115	interpreted as a literal string to pass to the tty (as if it was
		1116	prefixed with C<string:>).
		1117
		1118	The following action prefixes are known - extensions can provide
		1119	additional prefixes:
		1120
		1121	=over 4
		1122
		1123	=item string:STRING
		1124
		1125	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1126	then the remaining C<STRING> will be passed to the program running in the
		1127	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1128	string C<echo rm -rf /> followed by a newline:
		1129
		1130	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1131
		1132	This could in theory be used to completely redefine your keymap.
		1133
		1134	In addition, for actions of this type, you can define a range of
		1135	keysyms in one shot by loading the C<keysym-list> perl extension and
		1136	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1157	should be a character not used by the strings.	1137	the delimiter `/' should be a character not used by the strings.
1158		1138
1159	Its usage can be demonstrated by an example:	1139	Its usage can be demonstrated by an example:
1160		1140
1161	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1141	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1162		1142
1163	The above line is equivalent to the following three lines:	1143	The above line is equivalent to the following three lines:
1164		1144
1165	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1145	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1166	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1146	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1167	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1147	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1168		1148
		1149	=item command:STRING
		1150
1169	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1151	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1170	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1152	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1153	the opposite of C<string:> - instead of sending it to the program running
		1154	in the terminal, it will be treated as if it were program output). This is
		1155	most useful to feed command sequences into @@RXVT_NAME@@.
		1156
1171	example the following means "change the current locale to C<zh_CN.GBK>	1157	For example the following means "change the current locale to C<zh_CN.GBK>
1172	when Control-Meta-c is being pressed":	1158	when Control-Meta-c is being pressed":
1173		1159
1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1160	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1175		1161
1176	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1162	The following example will map Control-Meta-1 and Control-Meta-2 to
1177	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1163	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1178	manpage. For example, the F<selection> extension (activated via	1164	font-switching at runtime:
1179	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1180		1165
1181	URxvt.keysym.M-C-c: perl:selection:rot13	1166	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1167	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1182		1168
1183	Due the the large number of modifier combinations, a defined key mapping	1169	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1184	will match if at I<at least> the specified identifiers are being set, and	1170	info):
1185	no other key mappings with those and more bits are being defined. That
1186	means that defining a key map for C<a> will automatically provide
1187	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1188	mappings themselves.
1189		1171
1190	Unfortunately, this will override built-in key mappings. For example	1172	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1173	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1174
		1175	=item builtin:
		1176
		1177	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1178	key binding existed for the key combination. The obvious use is to undo
		1179	the effect of existing bindings. The not so obvious use is to reinstate
		1180	bindings when another binding overrides too many modifiers.
		1181
1191	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1182	For example if you overwrite the C<Insert> key you will disable
1192	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1183	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1193	user-defined keymap using the C<builtin:> replacement:	1184	"holes" into the user-defined keymap using the C<builtin:> replacement:
1194		1185
1195	URxvt.keysym.Insert: <my insert key sequence>	1186	URxvt.keysym.Insert: <my insert key sequence>
1196	URxvt.keysym.S-Insert: builtin:	1187	URxvt.keysym.S-Insert: builtin:
1197		1188
1198	The first line defines a mapping for C<Insert> and I<any> combination	1189	The first line defines a mapping for C<Insert> and I<any> combination
1199	of modifiers. The second line re-establishes the default mapping for	1190	of modifiers. The second line re-establishes the default mapping for
1200	C<Shift-Insert>.	1191	C<Shift-Insert>.
1201		1192
1202	The following example will map Control-Meta-1 and Control-Meta-2 to	1193	=item builtin-string:
1203	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1204	font-switching at runtime:
1205		1194
1206	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1195	This action is mainly useful to restore string mappings for keys that
1207	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1196	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1197	difficult to explain - basically, this action will send the string to the
		1198	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1199	action for it.
1208		1200
1209	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1201	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1210	info):	1202	selection when you press C<Shift-Insert>. With the following bindings, it
		1203	would instead emit the (undocumented, but what applications running in the
		1204	terminal might expect) sequence C<ESC [ 2 $> instead:
1211		1205
1212	URxvt.keysym.M-C-3: command:\033[8;25;80t	1206	URxvt.keysym.S-Insert: builtin-string:
1213	URxvt.keysym.M-C-4: command:\033[8;48;110t	1207	URxvt.keysym.C-S-Insert: builtin:
		1208
		1209	The first line disables the paste functionality for that key
		1210	combination, and the second reinstates the default behaviour for
		1211	C<Control-Shift-Insert>, which would otherwise be overridden.
		1212
		1213	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1214	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1215	this:
		1216
		1217	URxvt.keysym.C-M-c: builtin-string:
		1218	URxvt.keysym.C-M-v: builtin-string:
		1219
		1220	=item EXTENSION:STRING
		1221
		1222	An action of this form invokes the action B<STRING>, if any, provided
		1223	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1224	be loaded automatically if necessary.
		1225
		1226	Not all extensions define actions, but popular extensions that do
		1227	include the I<selection> and I<matcher> extensions (documented in their
		1228	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1229	respectively).
		1230
		1231	From the silly examples department, this will rot13-"encrypt"
		1232	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1233	keyboards:
		1234
		1235	URxvt.keysym.M-C-c: selection:rot13
		1236
		1237	=item perl:STRING DEPRECATED
		1238
		1239	This is a deprecated way of invoking commands provided by perl
		1240	extensions. It is still supported, but should not be used anymore.
		1241
		1242	=back
1214		1243
1215	=item B<perl-ext-common>: I<string>	1244	=item B<perl-ext-common>: I<string>
1216		1245
1217	=item B<perl-ext>: I<string>	1246	=item B<perl-ext>: I<string>
1218		1247
…		…
1220	use in this terminal instance; option B<-pe>.	1249	use in this terminal instance; option B<-pe>.
1221		1250
1222	Extension names can be prefixed with a C<-> sign to prohibit using	1251	Extension names can be prefixed with a C<-> sign to prohibit using
1223	them. This can be useful to selectively disable some extensions loaded	1252	them. This can be useful to selectively disable some extensions loaded
1224	by default, or specified via the C<perl-ext-common> resource. For	1253	by default, or specified via the C<perl-ext-common> resource. For
1225	example, C<default,-selection> will use all the default extension except	1254	example, C<default,-selection> will use all the default extensions except
1226	C<selection>.	1255	C<selection>.
1227		1256
1228	Extension names can also be followed by an argument in angle brackets	1257	The default set includes the C<selection>, C<option-popup>,
1229	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1258	C<selection-popup>, C<readline> and C<searchable-scrollback>
1230	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1259	extensions, and extensions which are mentioned in B<keysym> resources.
1231	multiple times with different arguments will pass multiple arguments to	1260
1232	the extension.	1261	Any extension such that a corresponding resource is given on the
		1262	command line is automatically appended to B<perl-ext>.
1233		1263
1234	Each extension is looked up in the library directories, loaded if	1264	Each extension is looked up in the library directories, loaded if
1235	necessary, and bound to the current terminal instance.	1265	necessary, and bound to the current terminal instance. When the library
		1266	search path contains multiple extension files of the same name, then the
		1267	first one found will be used.
1236		1268
1237	If both of these resources are the empty string, then the perl	1269	If both of these resources are the empty string, then the perl interpreter
1238	interpreter will not be initialized. The idea behind two options is that	1270	will not be initialized. The rationale for having two options is that
1239	B<perl-ext-common> will be used for extensions that should be available to	1271	B<perl-ext-common> will be used for extensions that should be available to
1240	all instances, while B<perl-ext> is used for specific instances.	1272	all instances, while B<perl-ext> is used for specific instances.
1241		1273
1242	=item B<perl-eval>: I<string>	1274	=item B<perl-eval>: I<string>
1243		1275
…		…
1245	the @@RXVT_NAME@@perl(3) manpage.	1277	the @@RXVT_NAME@@perl(3) manpage.
1246		1278
1247	=item B<perl-lib>: I<path>	1279	=item B<perl-lib>: I<path>
1248		1280
1249	Colon-separated list of additional directories that hold extension	1281	Colon-separated list of additional directories that hold extension
1250	scripts. When looking for extensions specified by the C<perl> resource,	1282	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1251	@@RXVT_NAME@@ will first look in these directories and then in	1283	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1252	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1284	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1253		1285
1254	See the @@RXVT_NAME@@perl(3) manpage.	1286	See the @@RXVT_NAME@@perl(3) manpage.
1255		1287
1256	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1288	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1257		1289
…		…
1261	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1293	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1262		1294
1263	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1295	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1264	for details.	1296	for details.
1265		1297
1266	=item B<searchable-scrollback:> I<keysym>	1298	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1267		1299
1268	Sets the hotkey that starts the incremental scrollback buffer search	1300	This resource is deprecated and will be removed. Use a B<keysym> resource
1269	(default: C<M-s>).	1301	instead, e.g.:
1270		1302
		1303	URxvt.keysym.M-s: searchable-scrollback:start
		1304
1271	=item B<urlLauncher>: I<string>	1305	=item B<url-launcher>: I<string>
1272		1306
1273	Specifies the program to be started with a URL argument. Used by the	1307	Specifies the program to be started with a URL argument. Used by the
1274	C<selection-popup> and C<matcher> perl extensions.	1308	C<selection-popup> and C<matcher> perl extensions.
1275		1309
1276	=item B<transient-for>: I<windowid>	1310	=item B<transient-for>: I<windowid>
…		…
1280	=item B<override-redirect>: I<boolean>	1314	=item B<override-redirect>: I<boolean>
1281		1315
1282	Compile I<frills>: Sets override-redirect for the terminal window, making	1316	Compile I<frills>: Sets override-redirect for the terminal window, making
1283	it almost invisible to window managers; option B<-override-redirect>.	1317	it almost invisible to window managers; option B<-override-redirect>.
1284		1318
		1319	=item B<iso14755:> I<boolean>
		1320
		1321	Turn on/off ISO 14755 (default enabled).
		1322
1285	=item B<iso14755_52:> I<boolean>	1323	=item B<iso14755_52:> I<boolean>
1286		1324
1287	Turn on/off ISO 14755 5.2 mode (default enabled).	1325	Turn on/off ISO 14755 5.2 mode (default enabled).
		1326
		1327	=back
		1328
		1329	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1330
		1331	=over 4
		1332
		1333	=item B<-pixmap> I<file[;oplist]>
		1334
		1335	=item B<backgroundPixmap:> I<file[;oplist]>
		1336
		1337	Compile I<pixbuf>: Use the specified image file as the window's
		1338	background and also optionally specify a colon separated list of
		1339	operations to modify it. Note that you may need to quote the C<;>
		1340	character when using the command line option, as C<;> is usually a
		1341	metacharacter in shells. Supported operations are:
		1342
		1343	=over 4
		1344
		1345	=item B<WxH+X+Y>
		1346
		1347	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1348	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1349	scale of 0 disables scaling.
		1350
		1351	=item B<op=tile>
		1352
		1353	enables tiling
		1354
		1355	=item B<op=keep-aspect>
		1356
		1357	maintain the image aspect ratio when scaling
		1358
		1359	=item B<op=root-align>
		1360
		1361	use the position of the terminal window relative to the root window as
		1362	the image offset, simulating a root window background
		1363
		1364	=back
		1365
		1366	The default scale and position setting is C<100x100+50+50>.
		1367	Alternatively, a predefined set of templates can be used to achieve
		1368	the most common setups:
		1369
		1370	=over 4
		1371
		1372	=item B<style=tiled>
		1373
		1374	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1375
		1376	=item B<style=aspect-stretched>
		1377
		1378	the image is scaled to fill the whole window maintaining the aspect
		1379	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1380
		1381	=item B<style=stretched>
		1382
		1383	the image is scaled to fill the whole window. Equivalent to 100x100
		1384
		1385	=item B<style=centered>
		1386
		1387	the image is centered with no scaling. Equivalent to 0x0+50+50
		1388
		1389	=item B<style=root-tiled>
		1390
		1391	the image is tiled with no scaling and using 'root' positioning.
		1392	Equivalent to 0x0:op=tile:op=root-align
		1393
		1394	=back
		1395
		1396	If multiple templates are specified the last one wins. Note that a
		1397	template overrides all the scale, position and operations settings.
		1398
		1399	If used in conjunction with pseudo-transparency, the specified pixmap
		1400	will be blended over the transparent background using alpha-blending.
		1401
		1402	=item B<-tr>\|B<+tr>
		1403
		1404	=item B<transparent:> I<boolean>
		1405
		1406	Turn on/off pseudo-transparency by using the root pixmap as background.
		1407
		1408	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1409	will be removed in future versions.
		1410
		1411	=item B<-tint> I<colour>
		1412
		1413	=item B<tintColor:> I<colour>
		1414
		1415	Tint the transparent background with the given colour. Note that a
		1416	black tint yields a completely black image while a white tint yields
		1417	the image unchanged.
		1418
		1419	=item B<-sh> I<number>
		1420
		1421	=item B<shading:> I<number>
		1422
		1423	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1424	A value of 100 means no shading.
		1425
		1426	=item B<-blr> I<HxV>
		1427
		1428	=item B<blurRadius:> I<HxV>
		1429
		1430	Apply gaussian blur with the specified radius to the transparent
		1431	background. If a single number is specified, the vertical and
		1432	horizontal radii are considered to be the same. Setting one of the
		1433	radii to 1 and the other to a large number creates interesting effects
		1434	on some backgrounds. The maximum radius value is 128. An horizontal or
		1435	vertical radius of 0 disables blurring.
		1436
		1437	=item B<path:> I<path>
		1438
		1439	Specify the colon-delimited search path for finding background image files.
1288		1440
1289	=back	1441	=back
1290		1442
1291	=head1 THE SCROLLBAR	1443	=head1 THE SCROLLBAR
1292		1444
…		…
1340	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1492	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1341	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1493	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1342		1494
1343	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1495	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1344	inserted too.	1496	inserted too.
		1497
		1498	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1499	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1500	binding causes the value of the internal selection to be copied to the
		1501	CLIPBOARD selection, while the second binding causes the value of the
		1502	CLIPBOARD selection to be inserted.
1345		1503
1346	=back	1504	=back
1347		1505
1348	=head1 CHANGING FONTS	1506	=head1 CHANGING FONTS
1349		1507
…		…
1431	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1589	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1432	it can be seen via the I<who(1)> command, and can accept messages. To	1590	it can be seen via the I<who(1)> command, and can accept messages. To
1433	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1591	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1434	on some systems or setgid to root or to some other group on others.	1592	on some systems or setgid to root or to some other group on others.
1435		1593
1436	=head1 COLORS AND GRAPHICS	1594	=head1 COLOURS AND GRAPHICS
1437		1595
1438	In addition to the default foreground and background colours,	1596	In addition to the default foreground and background colours,
1439	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1597	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1440	high-intensity bold/blink versions of the same). Here is a list of the	1598	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1441	colours with their names.	1599	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1600	cube plus a 8 (24) colour greyscale ramp.
		1601
		1602	Here is a list of the ANSI colours with their names.
1442		1603
1443	=begin table	1604	=begin table
1444		1605
1445	B<color0> (black) = Black	1606	B<color0> (black) = Black
1446	B<color1> (red) = Red3	1607	B<color1> (red) = Red3
…		…
1466	It is also possible to specify the colour values of B<foreground>,	1627	It is also possible to specify the colour values of B<foreground>,
1467	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1628	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1468	a number 0-15, as a convenient shorthand to reference the colour name of	1629	a number 0-15, as a convenient shorthand to reference the colour name of
1469	color0-color15.	1630	color0-color15.
1470		1631
1471	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1632	The following text gives values for the standard 88 colour mode (and
1472	additional 72 colours. The first 64 of those (with indices 16 to 79)	1633	values for the 256 colour mode in parentheses).
1473	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1474	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1475		1634
		1635	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1636
		1637	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1638	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1639
		1640	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1641	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1642	the RGB cube.
		1643
1476	Together, all those colours implement the 88 colour xterm colours. Only	1644	Together, all those colours implement the 88 (256) colour xterm
1477	the first 16 can be changed using resources currently, the rest can only	1645	colours. Only the first 16 can be changed using resources currently, the
1478	be changed via command sequences ("escape codes").	1646	rest can only be changed via command sequences ("escape codes").
		1647
		1648	Applications are advised to use terminfo or command sequences to discover
		1649	number and RGB values of all colours (yes, you can query this...).
1479		1650
1480	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1651	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1481	always swapping the foreground/background colours. This is in contrast to	1652	always swapping the foreground/background colours. This is in contrast to
1482	I<xterm>(1) where the colours are only swapped if they have not otherwise	1653	I<xterm>(1) where the colours are only swapped if they have not otherwise
1483	been specified. For example,	1654	been specified. For example,
1484		1655
1485	=over 4
1486
1487	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1656	@@RXVT_NAME@@ -fg Black -bg White -rv
1488		1657
1489	would yield White on Black, while on I<xterm>(1) it would yield Black	1658	would yield White on Black, while on I<xterm>(1) it would yield Black on
1490	on White.	1659	White.
1491
1492	=back
1493		1660
1494	=head2 ALPHA CHANNEL SUPPORT	1661	=head2 ALPHA CHANNEL SUPPORT
1495		1662
1496	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1663	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1497	their act together, rxvt-unicode will do it's own alpha channel management:	1664	their act together, rxvt-unicode will do its own alpha channel management:
1498		1665
1499	You can prefix any color with an opaquenes percentage enclosed in	1666	You can prefix any colour with an opaqueness percentage enclosed in
1500	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1667	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1501	(0-100) that specifies the opacity of the color, where C<0> is completely	1668	(0-100) that specifies the opacity of the colour, where C<0> is completely
1502	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1669	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1503	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1670	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1504	is the recommended format to specify transparency values, and works with	1671	is the recommended format to specify transparency values, and works with
1505	all ways to specify a colour.	1672	all ways to specify a colour.
1506		1673
…		…
1584		1751
1585	=item B<SHELL>	1752	=item B<SHELL>
1586		1753
1587	The shell to be used for command execution, defaults to C</bin/sh>.	1754	The shell to be used for command execution, defaults to C</bin/sh>.
1588		1755
1589	=item B<RXVT_SOCKET>	1756	=item B<RXVT_SOCKET> [I<sic>]
1590		1757
1591	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1758	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1592	@@RXVT_NAME@@d(1).	1759	@@RXVT_NAME@@d(1).
1593		1760
1594	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1761	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1762
		1763	=item B<URXVT_PERL_LIB>
		1764
		1765	Additional F<:>-separated library search path for perl extensions. Will be
		1766	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1767	directory.
		1768
		1769	=item B<URXVT_PERL_VERBOSITY>
		1770
		1771	See L<@@RXVT_NAME@@perl>(3).
1595		1772
1596	=item B<HOME>	1773	=item B<HOME>
1597		1774
1598	Used to locate the default directory for the unix domain socket for	1775	Used to locate the default directory for the unix domain socket for
1599	daemon communications and to locate various resource files (such as	1776	daemon communications and to locate various resource files (such as
1600	C<.Xdefaults>)	1777	C<.Xdefaults>)
1601		1778
1602	=item B<XAPPLRESDIR>	1779	=item B<XAPPLRESDIR>
1603		1780
1604	Directory where various X resource files are being located.	1781	Directory where application-specific X resource files are located.
1605		1782
1606	=item B<XENVIRONMENT>	1783	=item B<XENVIRONMENT>
1607		1784
1608	If set and accessible, gives the name of a X resource file to be loaded by	1785	If set and accessible, gives the name of a X resource file to be loaded by
1609	@@RXVT_NAME@@.	1786	@@RXVT_NAME@@.
…		…
1614		1791
1615	=over 4	1792	=over 4
1616		1793
1617	=item B</usr/lib/X11/rgb.txt>	1794	=item B</usr/lib/X11/rgb.txt>
1618		1795
1619	Color names.	1796	Colour names.
1620		1797
1621	=back	1798	=back
1622		1799
1623	=head1 SEE ALSO	1800	=head1 SEE ALSO
1624		1801
		1802	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1625	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1803	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1626		1804
1627	=head1 CURRENT PROJECT COORDINATOR	1805	=head1 CURRENT PROJECT COORDINATOR
1628		1806
1629	=over 4	1807	=over 4
1630		1808
1631	=item Project Coordinator	1809	=item Project Coordinator
1632		1810
1633	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1811	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1634		1812
1635	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1813	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1636		1814
1637	=back	1815	=back
1638		1816
…		…
1642		1820
1643	=item John Bovey	1821	=item John Bovey
1644		1822
1645	University of Kent, 1992, wrote the original Xvt.	1823	University of Kent, 1992, wrote the original Xvt.
1646		1824
1647	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1825	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1648		1826
1649	very heavily modified Xvt and came up with Rxvt	1827	very heavily modified Xvt and came up with Rxvt
1650		1828
1651	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1829	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1652		1830
1653	wrote the Greek Keyboard Input (no longer in code)	1831	wrote the Greek Keyboard Input (no longer in code)
1654		1832
1655	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1833	=item mj olesen <olesen@me.QueensU.CA>
1656		1834
1657	Wrote the menu system.	1835	Wrote the menu system.
1658		1836
1659	Project Coordinator (changes.txt 2.11 to 2.21)	1837	Project Coordinator (changes.txt 2.11 to 2.21)
1660		1838
1661	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1839	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1662		1840
1663	Project Coordinator (changes.txt 2.21a to 2.4.5)	1841	Project Coordinator (changes.txt 2.21a to 2.4.5)
1664		1842
1665	=item Geoff Wing L<< <gcw@pobox.com> >>	1843	=item Geoff Wing <gcw@pobox.com>
1666		1844
1667	Rewrote screen display and text selection routines.	1845	Rewrote screen display and text selection routines.
1668		1846
1669	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1847	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1670		1848
1671	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1849	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1672		1850
1673	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1851	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1674	extension, random hacks, numerous bugfixes and extensions.	1852	extension, random hacks, numerous bugfixes and extensions.
1675		1853
1676	Project Coordinator (Changes 1.0 -)	1854	Project Coordinator (Changes 1.0 -)
1677		1855
1678	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1856	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1679		1857
1680	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1858	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1681		1859
1682	=back	1860	=back
1683		1861

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs. Revision 1.244 by sf-exg, Tue Jun 16 11:58:26 2015 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.169 by root, Wed Nov 5 00:14:18 2008 UTC vs.
Revision 1.244 by sf-exg, Tue Jun 16 11:58:26 2015 UTC