[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.140 by sasha, Fri Oct 26 18:27:29 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
17	=head1 FREQUENTLY ASKED QUESTIONS	20	=head1 FREQUENTLY ASKED QUESTIONS
18		21
19	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of	22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
20	frequently asked questions and answer to them and some common	23	frequently asked questions and answer to them and some common
21	problems. That document is also accessible on the World-Wide-Web at	24	problems. That document is also accessible on the World-Wide-Web at
22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.	25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
23		26
24	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
25		28
26	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
27	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
…		…
30	like mongolian or scripts requiring extremely complex combining rules,	33	like mongolian or scripts requiring extremely complex combining rules,
31	like tibetan or devanagari. Don't expect pretty output when using these	34	like tibetan or devanagari. Don't expect pretty output when using these
32	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work	35	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work
33	fine, though. A somewhat difficult case are right-to-left scripts, such	36	fine, though. A somewhat difficult case are right-to-left scripts, such
34	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms	37	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms
35	belong into the application, not the terminal emulator (too many things --	38	belong in the application, not the terminal emulator (too many things --
36	such as cursor-movement while editing -- break otherwise), but that might	39	such as cursor-movement while editing -- break otherwise), but that might
37	change.	40	change.
38		41
39	If you are looking for a terminal that supports more exotic scripts, let	42	If you are looking for a terminal that supports more exotic scripts, let
40	me recommend C<mlterm>, which is a very user friendly, lean and clean	43	me recommend C<mlterm>, which is a very user friendly, lean and clean
…		…
89		92
90	Print out a message describing available options.	93	Print out a message describing available options.
91		94
92	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
93		96
94	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
95	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
96	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
97		100
98	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
99		102
100	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
101	resource B<depth>.	104	resource B<depth>.
102		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
103	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
104		118
105	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
106		120
107	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
113	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
114		128
115	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
116		130
117	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
118
119	=item B<-tr>\|B<+tr>
120
121	Turn on/off illusion of a transparent window background. Obsolete form of it is
122	B<-ip> and it should not be used anymore; resource B<transparent>.
123
124	I<Please note that old resource name of B<inheritPixmap> is obsolete and should be
125	changed to B<transparent>. Backwards compatibility support for B<inheritPixmap> will
126	be phased out in future versions of rxvt!>
127
128	I<Please address all transparency related issues to Sasha Vasko at
129	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
130		132
131	=item B<-fade> I<number>	133	=item B<-fade> I<number>
132		134
133	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
134	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
137	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
138		140
139	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
140	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
141		143
142	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
143		145
144	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
145	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
146	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
147	used to brighten or darken the image in addition to tinting it.
148	Please note that certain tint colours can be applied on the server-side,
149	thus yielding performance gain of two orders of magnitude. These colours are:
150	blue, red, green, cyan, magenta, yellow, and those close to them; resource
151	I<tintColor>. Example:
152
153	@@RXVT_NAME@@ -tr -tint blue -sh 40
154
155	=item B<-sh> I<number>
156
157	Darken (0 .. 100) or lighten (-1 .. -100) the transparent
158	background image in addition to (or instead of) tinting it;
159	resource I<shading>.
160
161	=item B<-blt> I<string>
162
163	Specify background blending type. If background pixmap is specified
164	at the same time as transparency - such pixmap will be blended over
165	transparency image, using method specified. Supported values are :
166	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
167	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
168	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
169	alpha-blending. Compile I<afterimage>; resource I<blendType>.
170
171	=item B<-blr> I<HxV>
172
173	Apply Gaussian Blur with the specified radii to the transparent
174	background image. If single number is specified - both vertical and
175	horizontal radii are considered to be the same. Setting one of the
176	radii to 1 and another to a large number creates interesting effects
177	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
178	resource I<blurRadius>.
179		149
180	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
181		151
182	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
183		153
184	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
185		155
186	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
187
188	=item B<-pixmap> I<file[;geom]>
189
190	Compile I<afterimage>: Specify image file for the background and also
191	optionally specify its scaling with a geometry string. Note you may need to
192	add quotes to avoid special shell interpretation of the C<;> in the
193	command-line; for more details see resource B<backgroundPixmap>.
194		157
195	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
196		159
197	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
198		161
…		…
243	italic> >> characters are to be printed. See resource B<boldItalicFont>	206	italic> >> characters are to be printed. See resource B<boldItalicFont>
244	for details.	207	for details.
245		208
246	=item B<-is>\|B<+is>	209	=item B<-is>\|B<+is>
247		210
248	Compile I<font-styles>: Bold/Italic font styles imply high intensity	211	Compile I<font-styles>: Bold/Blink font styles imply high intensity
249	foreground/background (default). See resource B<intensityStyles> for	212	foreground/background (default). See resource B<intensityStyles> for
250	details.	213	details.
251		214
252	=item B<-name> I<name>	215	=item B<-name> I<name>
253		216
…		…
257		220
258	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
259		222
260	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
261		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
262	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
263		230
264	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265	B<utmpInhibit>.	232	B<utmpInhibit>.
266		233
…		…
270	B<visualBell>.	237	B<visualBell>.
271		238
272	=item B<-sb>\|B<+sb>	239	=item B<-sb>\|B<+sb>
273		240
274	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>\|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>\|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
275		251
276	=item B<-si>\|B<+si>	252	=item B<-si>\|B<+si>
277		253
278	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
279	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
286	=item B<-sw>\|B<+sw>	262	=item B<-sw>\|B<+sw>
287		263
288	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
289	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
290	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
291
292	=item B<-sr>\|B<+sr>
293
294	Put scrollbar on right/left; resource B<scrollBar_right>.
295
296	=item B<-st>\|B<+st>
297
298	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
299	resource B<scrollBar_floating>.
300		267
301	=item B<-ptab>\|B<+ptab>	268	=item B<-ptab>\|B<+ptab>
302		269
303	If enabled (default), "Horizontal Tab" characters are being stored as	270	If enabled (default), "Horizontal Tab" characters are being stored as
304	actual wide characters in the screen buffer, which makes it possible to	271	actual wide characters in the screen buffer, which makes it possible to
…		…
308		275
309	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
310		277
311	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
312		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
313	=item B<-iconic>	284	=item B<-iconic>
314		285
315	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
316	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
317		288
…		…
333		304
334	=item B<-bl>	305	=item B<-bl>
335		306
336	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
337	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
338	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
339		311
340	=item B<-override-redirect>	312	=item B<-override-redirect>
341		313
342	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
343	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
344		321
345	=item B<-sbg>	322	=item B<-sbg>
346		323
347	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
348	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
352	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
353		330
354	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
355	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
356	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
357		341
358	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
359		343
360	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
361	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
396	=item B<-pt> I<style>	380	=item B<-pt> I<style>
397		381
398	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
399	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
400		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
401	=item B<-im> I<text>	388	=item B<-im> I<text>
402		389
403	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
404		391
405	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
416		403
417	=item B<-tcw>	404	=item B<-tcw>
418		405
419	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
420	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
421	in-use. Instead of selecting a full line it will extend the selection the	408	in-use. Instead of selecting a full line it will extend the selection to
422	end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
423		410
424	=item B<-insecure>	411	=item B<-insecure>
425		412
426	Enable "insecure" mode, which currently enables most of the escape	413	Enable "insecure" mode, which currently enables most of the escape
427	sequences that echo strings. See the resource B<insecure> for more	414	sequences that echo strings. See the resource B<insecure> for more
…		…
447		434
448	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	435	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
449	will not immediately destroy its window when the program executed within	436	will not immediately destroy its window when the program executed within
450	it exits. Instead, it will wait till it is being killed or closed by the	437	it exits. Instead, it will wait till it is being killed or closed by the
451	user; resource B<hold>.	438	user; resource B<hold>.
		439
		440	=item B<-cd> I<path>
		441
		442	Sets the working directory for the shell (or the command specified via
		443	B<-e>). The I<path> must be an absolute path and it must exist for
		444	@@RXVT_NAME@@ to start; resource B<chdir>.
		445
		446	=item B<-xrm> I<string>
		447
		448	Works like the X Toolkit option of the same name, by adding the I<string>
		449	as if it were specified in a resource file. Resource values specified this
		450	way take precedence over all other resource specifications.
		451
		452	Note that you need to use the I<same> syntax as in the .Xdefaults file,
		453	e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific
		454	options can be specified as long-options on the commandline, so use
		455	of B<-xrm> is mostly limited to cases where you want to specify other
		456	resources (e.g. for input methods) or for compatibility with other
		457	programs.
452		458
453	=item B<-keysym.>I<sym> I<string>	459	=item B<-keysym.>I<sym> I<string>
454		460
455	Remap a key symbol. See resource B<keysym>.	461	Remap a key symbol. See resource B<keysym>.
456		462
…		…
491	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	497	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
492	entries and will not tinker with pty/tty permissions - you have to do that	498	entries and will not tinker with pty/tty permissions - you have to do that
493	yourself if you want that.	499	yourself if you want that.
494		500
495	As an extremely special case, specifying C<-1> will completely suppress	501	As an extremely special case, specifying C<-1> will completely suppress
496	pty/tty operations.	502	pty/tty operations, which is probably only useful in conjunction with some
		503	perl extension that manages the terminal.
497		504
498	Here is a example in perl that illustrates how this option can be used (a	505	Here is a example in perl that illustrates how this option can be used (a
499	longer example is in F<doc/pty-fd>):	506	longer example is in F<doc/pty-fd>):
500		507
501	use IO::Pty;	508	use IO::Pty;
…		…
515	Comma-separated list of perl extension scripts to use (or not to use) in	522	Comma-separated list of perl extension scripts to use (or not to use) in
516	this terminal instance. See resource B<perl-ext> for details.	523	this terminal instance. See resource B<perl-ext> for details.
517		524
518	=back	525	=back
519		526
520	=head1 RESOURCES (available also as long-options)	527	=head1 RESOURCES
521		528
522	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	529	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
523	options) compiled into your version.	530	options) compiled into your version. All resources are also available as
		531	long-options.
524		532
525	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
526	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
527	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
528	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
529		537
530	1. system-wide app-defaults file, either locale-dependent OR global
531	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
532	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
533	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
534	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
		543	6. resources specified via -xrm on the commandline
535		544
536	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
537	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
538	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily	547	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
539	configured, while the class name B<URxvt> allows resources unique to	548	configured, while the class name B<URxvt> allows resources unique to
…		…
549	=item B<depth:> I<bitdepth>	558	=item B<depth:> I<bitdepth>
550		559
551	Compile I<xft>: Attempt to find a visual with the given bit depth;	560	Compile I<xft>: Attempt to find a visual with the given bit depth;
552	option B<-depth>.	561	option B<-depth>.
553		562
		563	=item B<buffered:> I<boolean>
		564
		565	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		566	On some card/driver combination enabling it slightly decreases
		567	performance, on most it greatly helps it. The slowdown is small, so it
		568	should normally be enabled.
		569
554	=item B<geometry:> I<geom>	570	=item B<geometry:> I<geom>
555		571
556	Create the window with the specified X window geometry [default 80x24];	572	Create the window with the specified X window geometry [default 80x24];
557	option B<-geometry>.	573	option B<-geometry>.
558		574
…		…
571	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
572	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
573	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
574	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
575	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
576	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
577		593
578	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
579	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
580		596
581	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
592	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
593		609
594	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
595	foreground colour is the default.	611	foreground colour is the default.
596		612
597	=item B<colorRV:> I<colour>
598
599	Use the specified colour as the background for reverse video characters
600	when OPTION_HC is disabled (--disable-frills).
601
602	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
603		614
604	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
605	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
606		627
607	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
608		629
609	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
610	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
617		638
618	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
619		640
620	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
621	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
622	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
623		644
624	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
625		646
626	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
627	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
641		662
642	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
643	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
644	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
645		666
646	=item B<inheritPixmap:> I<boolean>
647
648	B<True>: make the background inherit the parent windows' pixmap, giving
649	artificial transparency. B<False>: do not inherit the parent windows'
650	pixmap.
651
652	I<Please note that transparency of any kind if completely unsupported by
653	the author. Don't bug him with installation questions!>
654
655	=item B<fading:> I<number>	667	=item B<fading:> I<number>
656		668
657	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
658		670
659	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
660		672
661	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
662	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
663		675
664	=item B<tintColor:> I<colour>	676	=item B<iconFile:> I<file>
665		677
666	Tint the transparent background pixmap with the given colour; option	678	Set the application icon pixmap; option B<-icon>.
667	B<-tint>.
668
669	=item B<shading:> I<number>
670
671	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
672	in addition to tinting it; option B<-sh>.
673
674	=item B<blendType:> I<string>
675
676	Specify background blending type; option B<-blt>.
677
678	=item B<blurRadius:> I<number>
679
680	Apply Gaussian Blurr with the specified radius to the transparent
681	background image; option B<-blr>.
682		679
683	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
684		681
685	Use the specified colour for the scrollbar [default #B2B2B2].	682	Use the specified colour for the scrollbar [default #B2B2B2].
686		683
…		…
691		688
692	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
693		690
694	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
695	and the text.	692	and the text.
696
697	=item B<backgroundPixmap:> I<file[;geom]>
698
699	Use the specified image file for the background and also optionally
700	specify its scaling with a geometry string B<WxH+X+Y>,
701	in which B<"W" / "H"> specify the horizontal/vertical scale (percent),
702	and B<"X" / "Y"> locate the image centre (percent).
703	A scale of 0 displays the image with tiling. A scale of 1 displays the
704	image without any scaling. A scale of 2 to 9 specifies an integer
705	number of images in that direction. No image will be magnified beyond
706	10 times its original size. The maximum permitted scale is 1000.
707	Special string of B<"auto"> used as a geometry will cause image to be
708	automatically scaled to match window size.
709	If used in conjunction with B<-tr> option - specified pixmap will be
710	blended over transparency image using either alpha-blending, or any
711	other blending type, specified with B<-blt "type"> option.
712	[default 0x0+50+50]
713
714	=item B<path:> I<path>
715
716	Specify the colon-delimited search path for finding background image files.
717		693
718	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
719		695
720	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
721	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
744	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
745	wide and 15 pixels high.	721	wide and 15 pixels high.
746		722
747	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
748	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
749	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
750	useful supplement.	726	useful supplement.
751		727
752	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
753	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
754	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
778	text font will being used for the given style.	754	text font will being used for the given style.
779		755
780	=item B<intensityStyles:> I<boolean>	756	=item B<intensityStyles:> I<boolean>
781		757
782	When font styles are not enabled, or this option is enabled (B<True>,	758	When font styles are not enabled, or this option is enabled (B<True>,
783	option B<-is>, the default), bold and italic font styles imply high	759	option B<-is>, the default), bold/blink font styles imply high
784	intensity foreground/background colours. Disabling this option (B<False>,	760	intensity foreground/background colours. Disabling this option (B<False>,
785	option B<+is>) disables this behaviour, the high intensity colours are not	761	option B<+is>) disables this behaviour, the high intensity colours are not
786	reachable.	762	reachable.
787		763
788	=item B<selectstyle:> I<mode>
789
790	Set mouse selection style to B<old> which is 2.20, B<oldword> which
791	is xterm style with 2.20 old word selection, or anything else which
792	gives xterm style selection. Only effective when the original (non-perl)
793	selection code is in use.
794
795	=item B<scrollstyle:> I<mode>
796
797	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
798	the author's favourite.
799
800	=item B<title:> I<string>	764	=item B<title:> I<string>
801		765
802	Set window title string, the default title is the command-line	766	Set window title string, the default title is the command-line
803	specified after the B<-e> option, if any, otherwise the application	767	specified after the B<-e> option, if any, otherwise the application
804	name; option B<-title>.	768	name; option B<-title>.
…		…
817	=item B<urgentOnBell:> I<boolean>	781	=item B<urgentOnBell:> I<boolean>
818		782
819	B<True>: set the urgency hint for the wm on receipt of a bell character.	783	B<True>: set the urgency hint for the wm on receipt of a bell character.
820	B<False>: do not set the urgency hint [default].	784	B<False>: do not set the urgency hint [default].
821		785
		786	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		787
822	=item B<visualBell:> I<boolean>	788	=item B<visualBell:> I<boolean>
823		789
824	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	790	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
825	B<False>: no visual bell [default]; option B<+vb>.	791	B<False>: no visual bell [default]; option B<+vb>.
826		792
…		…
828		794
829	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
830	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
831	[default]; option B<+ls>.	797	[default]; option B<+ls>.
832		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
833	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
834		805
835	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
836	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
837	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
849	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	820	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
850		821
851	This creates a new file in your home directory with the screen contents	822	This creates a new file in your home directory with the screen contents
852	every time you hit C<Print>.	823	every time you hit C<Print>.
853		824
		825	=item B<scrollstyle:> I<mode>
		826
		827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		828	the author's favourite.
		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
854	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
855		835
856	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
857	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
858		838
…		…
877	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
878	B<+si>.	858	B<+si>.
879		859
880	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
881		861
882	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
883	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
884	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
885		866
886	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
887		868
888	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
889	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
890	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
891	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
892		873
893	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
894		875
895	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
896	resource is limited on most machines to 65535; option B<-sl>.
897		877
898	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
899		879
900	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
901	option B<-b>.	881	option B<-b>.
…		…
945	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
946		926
947	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
948	option B<-bc>.	928	option B<-bc>.
949		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
		934
950	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
951		936
952	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
953	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
954	[default].	939	[default].
…		…
959		944
960	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
961		946
962	Mouse pointer background colour.	947	Mouse pointer background colour.
963		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
964	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
965		956
966	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
967	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
968		959
969	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
970		961
971	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
972	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
973	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
974	escape sequence.	965	escape sequence.
975		966
976	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
977		968
…		…
990	will be created). In this mode, characters outside ISO-8859-1 can be used.	981	will be created). In this mode, characters outside ISO-8859-1 can be used.
991		982
992	When the selection extension is not used, only ISO-8859-1 characters can	983	When the selection extension is not used, only ISO-8859-1 characters can
993	be used. If not specified, the built-in default is used:	984	be used. If not specified, the built-in default is used:
994		985
995	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
996		987
997	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
998		989
999	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1000		991
1001	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1002		993
1003	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1004		995
…		…
1056		1047
1057	=item B<secondaryScroll:> I<boolean>	1048	=item B<secondaryScroll:> I<boolean>
1058		1049
1059	Turn on/off secondary screen scroll (default enabled). If this	1050	Turn on/off secondary screen scroll (default enabled). If this
1060	option is enabled, scrolls on the secondary screen will change the	1051	option is enabled, scrolls on the secondary screen will change the
1061	scrollback buffer and switching to/from the secondary screen will	1052	scrollback buffer and, when secondaryScreen is off, switching
1062	instead scroll the screen up.	1053	to/from the secondary screen will instead scroll the screen up.
1063		1054
1064	=item B<hold>: I<boolean>	1055	=item B<hold>: I<boolean>
1065		1056
1066	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1057	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1067	will not immediately destroy its window when the program executed within	1058	will not immediately destroy its window when the program executed within
1068	it exits. Instead, it will wait till it is being killed or closed by the	1059	it exits. Instead, it will wait till it is being killed or closed by the
1069	user.	1060	user.
1070		1061
		1062	=item B<chdir>: I<path>
		1063
		1064	Sets the working directory for the shell (or the command specified via
		1065	B<-e>). The I<path> must be an absolute path and it must exist for
		1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1067	directory will be used; option B<-cd>.
		1068
1071	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1072		1070
1073	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1074	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1075		1073
1076	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1077	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1078	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1079	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1080	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1085	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1086	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1087	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1081		1088
1082	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1089	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1083	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1090	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1084	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1091	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1085	current application keymap mode state.	1092	current application keymap mode state.
1086		1093
1087	The spellings of I<key> can be obtained by using B<xev>(1) command or	1094	Due the the large number of modifier combinations, a key mapping will
1088	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1095	match if I<at least> the specified identifiers are being set, and no other
		1096	key mappings with those and more bits are being defined. That means that
		1097	defining a mapping for C<a> will automatically provide definitions for
		1098	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1099	themselves. See the C<builtin:> action, below, for a way to work around
		1100	this when this is a problem.
		1101
		1102	The spelling of I<key> depends on your implementation of X. An easy way to
		1103	find a key name is to use the B<xev>(1) command. You can find a list by
		1104	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1089	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1105	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1090	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1106	value (B<0x0000 - 0xFFFF>).
1091	performed in an exact manner; however, the closest match is assured.
1092		1107
1093	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1108	As with any resource value, the I<action> string may contain backslash
		1109	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1094	number), see RESOURCES in C<man 7 X> for futher details.	1110	number), see RESOURCES in C<man 7 X> for further details.
1095		1111
1096	You can define a range of keysyms in one shot by providing a I<string>	1112	An action starts with an action prefix that selects a certain type
1097	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1113	of action, followed by a colon. An action string without colons is
		1114	interpreted as a literal string to pass to the tty (as if it was
		1115	prefixed with C<string:>).
		1116
		1117	The following action prefixes are known - extensions can provide
		1118	additional prefixes:
		1119
		1120	=over 4
		1121
		1122	=item string:STRING
		1123
		1124	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1125	then the remaining C<STRING> will be passed to the program running in the
		1126	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1127	string C<echo rm -rf /> followed by a newline:
		1128
		1129	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1130
		1131	This could in theory be used to completely redefine your keymap.
		1132
		1133	In addition, for actions of this type, you can define a range of
		1134	keysyms in one shot by loading the C<keysym-list> perl extension and
		1135	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1098	should be a character not used by the strings.	1136	the delimiter `/' should be a character not used by the strings.
1099		1137
1100	Its usage can be demonstrated by an example:	1138	Its usage can be demonstrated by an example:
1101		1139
1102	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1140	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1103		1141
1104	The above line is equivalent to the following three lines:	1142	The above line is equivalent to the following three lines:
1105		1143
1106	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1144	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1107	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1145	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1108	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1146	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1109		1147
		1148	=item command:STRING
		1149
1110	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1150	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1111	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1151	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1152	the opposite of C<string:> - instead of sending it to the program running
		1153	in the terminal, it will be treated as if it were program output). This is
		1154	most useful to feed command sequences into @@RXVT_NAME@@.
		1155
1112	example the following means "change the current locale to C<zh_CN.GBK>	1156	For example the following means "change the current locale to C<zh_CN.GBK>
1113	when Control-Meta-c is being pressed":	1157	when Control-Meta-c is being pressed":
1114		1158
1115	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1159	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1116		1160
1117	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1161	The following example will map Control-Meta-1 and Control-Meta-2 to
1118	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1162	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1119	manpage. For example, the F<selection> extension (activated via	1163	font-switching at runtime:
1120	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1121		1164
1122	URxvt.keysym.M-C-c: perl:selection:rot13	1165	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1166	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1123		1167
1124	Due the the large number of modifier combinations, a defined key mapping	1168	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1125	will match if at I<at least> the specified identifiers are being set, and	1169	info):
1126	no other key mappings with those and more bits are being defined. That
1127	means that defining a key map for C<a> will automatically provide
1128	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1129	mappings themselves.
1130		1170
1131	Unfortunately, this will override built-in key mappings. For example	1171	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1172	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1173
		1174	=item builtin:
		1175
		1176	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1177	key binding existed for the key combination. The obvious use is to undo
		1178	the effect of existing bindings. The not so obvious use is to reinstate
		1179	bindings when another binding overrides too many modifiers.
		1180
1132	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1181	For example if you overwrite the C<Insert> key you will disable
1133	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1182	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1134	user-defined keymap using the C<builtin:> replacement:	1183	"holes" into the user-defined keymap using the C<builtin:> replacement:
1135		1184
1136	URxvt.keysym.Insert: <my insert key sequence>	1185	URxvt.keysym.Insert: <my insert key sequence>
1137	URxvt.keysym.S-Insert: builtin:	1186	URxvt.keysym.S-Insert: builtin:
1138		1187
1139	The first line defines a mapping for C<Insert> and I<any> combination	1188	The first line defines a mapping for C<Insert> and I<any> combination
1140	of modifiers. The second line re-establishes the default mapping for	1189	of modifiers. The second line re-establishes the default mapping for
1141	C<Shift-Insert>.	1190	C<Shift-Insert>.
1142		1191
1143	The following example will map Control-Meta-1 and Control-Meta-2 to	1192	=item builtin-string:
1144	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1145	font-switching at runtime:
1146		1193
1147	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1194	This action is mainly useful to restore string mappings for keys that
1148	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1195	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1196	difficult to explain - basically, this action will send the string to the
		1197	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1198	action for it.
1149		1199
1150	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1200	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1151	info):	1201	selection when you press C<Shift-Insert>. With the following bindings, it
		1202	would instead emit the (undocumented, but what applications running in the
		1203	terminal might expect) sequence C<ESC [ 2 $> instead:
1152		1204
1153	URxvt.keysym.M-C-3: command:\033[8;25;80t	1205	URxvt.keysym.S-Insert: builtin-string:
1154	URxvt.keysym.M-C-4: command:\033[8;48;110t	1206	URxvt.keysym.C-S-Insert: builtin:
		1207
		1208	The first line disables the paste functionality for that key
		1209	combination, and the second reinstates the default behaviour for
		1210	C<Control-Shift-Insert>, which would otherwise be overridden.
		1211
		1212	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1213	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1214	this:
		1215
		1216	URxvt.keysym.C-M-c: builtin-string:
		1217	URxvt.keysym.C-M-v: builtin-string:
		1218
		1219	=item EXTENSION:STRING
		1220
		1221	An action of this form invokes the action B<STRING>, if any, provided
		1222	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1223	be loaded automatically if necessary.
		1224
		1225	Not all extensions define actions, but popular extensions that do
		1226	include the I<selection> and I<matcher> extensions (documented in their
		1227	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1228	respectively).
		1229
		1230	From the silly examples department, this will rot13-"encrypt"
		1231	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1232	keyboards:
		1233
		1234	URxvt.keysym.M-C-c: selection:rot13
		1235
		1236	=item perl:STRING DEPRECATED
		1237
		1238	This is a deprecated way of invoking commands provided by perl
		1239	extensions. It is still supported, but should not be used anymore.
		1240
		1241	=back
1155		1242
1156	=item B<perl-ext-common>: I<string>	1243	=item B<perl-ext-common>: I<string>
1157		1244
1158	=item B<perl-ext>: I<string>	1245	=item B<perl-ext>: I<string>
1159		1246
…		…
1161	use in this terminal instance; option B<-pe>.	1248	use in this terminal instance; option B<-pe>.
1162		1249
1163	Extension names can be prefixed with a C<-> sign to prohibit using	1250	Extension names can be prefixed with a C<-> sign to prohibit using
1164	them. This can be useful to selectively disable some extensions loaded	1251	them. This can be useful to selectively disable some extensions loaded
1165	by default, or specified via the C<perl-ext-common> resource. For	1252	by default, or specified via the C<perl-ext-common> resource. For
1166	example, C<default,-selection> will use all the default extension except	1253	example, C<default,-selection> will use all the default extensions except
1167	C<selection>.	1254	C<selection>.
1168		1255
1169	Extension names can also be followed by an argument in angle brackets	1256	The default set includes the C<selection>, C<option-popup>,
1170	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1257	C<selection-popup>, C<readline> and C<searchable-scrollback>
1171	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1258	extensions, and extensions which are mentioned in B<keysym> resources.
1172	multiple times with different arguments will pass multiple arguments to	1259
1173	the extension.	1260	Any extension such that a corresponding resource is given on the
		1261	command line is automatically appended to B<perl-ext>.
1174		1262
1175	Each extension is looked up in the library directories, loaded if	1263	Each extension is looked up in the library directories, loaded if
1176	necessary, and bound to the current terminal instance.	1264	necessary, and bound to the current terminal instance. When the library
		1265	search path contains multiple extension files of the same name, then the
		1266	first one found will be used.
1177		1267
1178	If both of these resources are the empty string, then the perl	1268	If both of these resources are the empty string, then the perl interpreter
1179	interpreter will not be initialized. The idea behind two options is that	1269	will not be initialized. The rationale for having two options is that
1180	B<perl-ext-common> will be used for extensions that should be available to	1270	B<perl-ext-common> will be used for extensions that should be available to
1181	all instances, while B<perl-ext> is used for specific instances.	1271	all instances, while B<perl-ext> is used for specific instances.
1182		1272
1183	=item B<perl-eval>: I<string>	1273	=item B<perl-eval>: I<string>
1184		1274
1185	Perl code to be evaluated when all extensions have been registered. See	1275	Perl code to be evaluated when all extensions have been registered. See
1186	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1276	the @@RXVT_NAME@@perl(3) manpage.
1187	will be ignored when running setuid/setgid.
1188		1277
1189	=item B<perl-lib>: I<path>	1278	=item B<perl-lib>: I<path>
1190		1279
1191	Colon-separated list of additional directories that hold extension	1280	Colon-separated list of additional directories that hold extension
1192	scripts. When looking for extensions specified by the C<perl> resource,	1281	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1193	@@RXVT_NAME@@ will first look in these directories and then in	1282	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1194	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1283	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1195	will be ignored when running setuid/setgid.
1196		1284
1197	See the @@RXVT_NAME@@perl(3) manpage.	1285	See the @@RXVT_NAME@@perl(3) manpage.
1198		1286
1199	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1287	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1200		1288
…		…
1204	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1292	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1205		1293
1206	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1294	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1207	for details.	1295	for details.
1208		1296
1209	=item B<searchable-scrollback:> I<keysym>	1297	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1210		1298
1211	Sets the hotkey that starts the incremental scrollback buffer search	1299	This resource is deprecated and will be removed. Use a B<keysym> resource
1212	(default: C<M-s>).	1300	instead, e.g.:
1213		1301
		1302	URxvt.keysym.M-s: searchable-scrollback:start
		1303
1214	=item B<urlLauncher>: I<string>	1304	=item B<url-launcher>: I<string>
1215		1305
1216	Specifies the program to be started with a URL argument. Used by the	1306	Specifies the program to be started with a URL argument. Used by the
1217	C<selection-popup> and C<matcher> perl extensions.	1307	C<selection-popup> and C<matcher> perl extensions.
1218		1308
1219	=item B<transient-for>: I<windowid>	1309	=item B<transient-for>: I<windowid>
…		…
1222		1312
1223	=item B<override-redirect>: I<boolean>	1313	=item B<override-redirect>: I<boolean>
1224		1314
1225	Compile I<frills>: Sets override-redirect for the terminal window, making	1315	Compile I<frills>: Sets override-redirect for the terminal window, making
1226	it almost invisible to window managers; option B<-override-redirect>.	1316	it almost invisible to window managers; option B<-override-redirect>.
		1317
		1318	=item B<iso14755:> I<boolean>
		1319
		1320	Turn on/off ISO 14755 (default enabled).
1227		1321
1228	=item B<iso14755_52:> I<boolean>	1322	=item B<iso14755_52:> I<boolean>
1229		1323
1230	Turn on/off ISO 14755 5.2 mode (default enabled).	1324	Turn on/off ISO 14755 5.2 mode (default enabled).
1231		1325
…		…
1283	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1377	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1284	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1378	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1285		1379
1286	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1380	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1287	inserted too.	1381	inserted too.
		1382
		1383	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1384	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1385	binding causes the value of the internal selection to be copied to the
		1386	CLIPBOARD selection, while the second binding causes the value of the
		1387	CLIPBOARD selection to be inserted.
1288		1388
1289	=back	1389	=back
1290		1390
1291	=head1 CHANGING FONTS	1391	=head1 CHANGING FONTS
1292		1392
…		…
1374	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1474	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1375	it can be seen via the I<who(1)> command, and can accept messages. To	1475	it can be seen via the I<who(1)> command, and can accept messages. To
1376	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1476	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1377	on some systems or setgid to root or to some other group on others.	1477	on some systems or setgid to root or to some other group on others.
1378		1478
1379	=head1 COLORS AND GRAPHICS	1479	=head1 COLOURS AND GRAPHICS
1380		1480
1381	In addition to the default foreground and background colours,	1481	In addition to the default foreground and background colours,
1382	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1482	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1383	high-intensity bold/blink versions of the same). Here is a list of the	1483	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1384	colours with their names.	1484	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1485	cube plus a 8 (24) colour greyscale ramp.
		1486
		1487	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1488	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1489	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1490	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1491	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1492	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1493	use many similar 24-bit colours. It's typically not a problem in common
		1494	scenarios.
		1495
		1496	Here is a list of the ANSI colours with their names.
1385		1497
1386	=begin table	1498	=begin table
1387		1499
1388	B<color0> (black) = Black	1500	B<color0> (black) = Black
1389	B<color1> (red) = Red3	1501	B<color1> (red) = Red3
…		…
1409	It is also possible to specify the colour values of B<foreground>,	1521	It is also possible to specify the colour values of B<foreground>,
1410	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1522	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1411	a number 0-15, as a convenient shorthand to reference the colour name of	1523	a number 0-15, as a convenient shorthand to reference the colour name of
1412	color0-color15.	1524	color0-color15.
1413		1525
1414	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1526	The following text gives values for the standard 88 colour mode (and
1415	additional 72 colours. The first 64 of those (with indices 16 to 79)	1527	values for the 256 colour mode in parentheses).
1416	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1417	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1418		1528
		1529	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1530
		1531	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1532	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1533
		1534	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1535	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1536	the RGB cube.
		1537
1419	Together, all those colours implement the 88 colour xterm colours. Only	1538	Together, all those colours implement the 88 (256) colour xterm
1420	the first 16 can be changed using resources currently, the rest can only	1539	colours. Only the first 16 can be changed using resources currently, the
1421	be changed via command sequences ("escape codes").	1540	rest can only be changed via command sequences ("escape codes").
		1541
		1542	Applications are advised to use terminfo or command sequences to discover
		1543	number and RGB values of all colours (yes, you can query this...).
1422		1544
1423	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1545	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1424	always swapping the foreground/background colours. This is in contrast to	1546	always swapping the foreground/background colours. This is in contrast to
1425	I<xterm>(1) where the colours are only swapped if they have not otherwise	1547	I<xterm>(1) where the colours are only swapped if they have not otherwise
1426	been specified. For example,	1548	been specified. For example,
1427		1549
1428	=over 4
1429
1430	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1550	@@RXVT_NAME@@ -fg Black -bg White -rv
1431		1551
1432	would yield White on Black, while on I<xterm>(1) it would yield Black	1552	would yield White on Black, while on I<xterm>(1) it would yield Black on
1433	on White.	1553	White.
1434
1435	=back
1436		1554
1437	=head2 ALPHA CHANNEL SUPPORT	1555	=head2 ALPHA CHANNEL SUPPORT
1438		1556
1439	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1557	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1440	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1558	their act together, rxvt-unicode will do its own alpha channel management:
1441	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1559
1442	in addition to the ones provided by X, where the additional A component	1560	You can prefix any colour with an opaqueness percentage enclosed in
		1561	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1562	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1563	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1564	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1565	is the recommended format to specify transparency values, and works with
		1566	all ways to specify a colour.
		1567
		1568	For complete control, rxvt-unicode also supports
		1569	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1570	specifications, where the additional C<aaaa> component specifies opacity
1443	specifies opacity (alpha) values. The minimum value of C<0> is completely	1571	(alpha) values. The minimum value of C<0000> is completely transparent,
1444	transparent). You can also prefix any color with C<[percent]>, where	1572	while C<ffff> is completely opaque). The two example colours from
1445	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1573	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1446	the color, where C<0> is completely transparent and C<100> is completelxy	1574	C<rgba:0000/ff00/0000/f332>.
1447	opaque.
1448		1575
1449	You probably need to specify B<"-depth 32">, too, and have the luck that	1576	You probably need to specify B<"-depth 32">, too, to force a visual with
1450	your X-server uses ARGB pixel layout, as X is far from just supporting	1577	alpha channels, and have the luck that your X-server uses ARGB pixel
1451	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1578	layout, as X is far from just supporting ARGB visuals out of the box, and
		1579	rxvt-unicode just fudges around.
1452		1580
1453	For example, the following selects an almost completely transparent red	1581	For example, the following selects an almost completely transparent black
1454	background, and an almost opaque pink foreground:	1582	background, and an almost opaque pink foreground:
1455		1583
1456	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1584	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1457		1585
1458	I<Please note that transparency of any kind if completely unsupported by	1586	When not using a background image, then the interpretation of the
1459	the author. Don't bug him with installation questions!>	1587	alpha channel is up to your compositing manager (most interpret it as
		1588	transparency of course).
		1589
		1590	When using a background pixmap or pseudo-transparency, then the background
		1591	colour will always behave as if it were completely transparent (so the
		1592	background image shows instead), regardless of how it was specified, while
		1593	other colours will either be transparent as specified (the background
		1594	image will show through) on servers supporting the RENDER extension, or
		1595	fully opaque on servers not supporting the RENDER EXTENSION.
		1596
		1597	Please note that due to bugs in Xft, specifying alpha values might result
		1598	in garbage being displayed when the X-server does not support the RENDER
		1599	extension.
1460		1600
1461	=head1 ENVIRONMENT	1601	=head1 ENVIRONMENT
1462		1602
1463	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1603	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1464		1604
…		…
1470	resources or on the command line.	1610	resources or on the command line.
1471		1611
1472	=item B<COLORTERM>	1612	=item B<COLORTERM>
1473		1613
1474	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was	1614	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was
1475	compiled with background image support, and optionally with the added	1615	compiled with background image support, and optionally with the added
1476	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome	1616	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome
1477	screen.	1617	screen.
1478		1618
1479	=item B<COLORFGBG>	1619	=item B<COLORFGBG>
1480		1620
1481	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is	1621	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
1482	the colour code used as default foreground/text colour (or the string	1622	the colour code used as default foreground/text colour (or the string
1483	C<default> to indicate that the default-colour escape sequence is to be	1623	C<default> to indicate that the default-colour escape sequence is to be
1484	used), C<bg> is the colour code used as default background colour (or the	1624	used), C<bg> is the colour code used as default background colour (or the
1485	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@	1625	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
1486	was compiled with background image support. Libraries like C<ncurses>	1626	was compiled with background image support. Libraries like C<ncurses>
1487	and C<slang> can (and do) use this information to optimize screen output.	1627	and C<slang> can (and do) use this information to optimize screen output.
1488		1628
1489	=item B<WINDOWID>	1629	=item B<WINDOWID>
1490		1630
1491	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel	1631	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
…		…
1498	C<--with-terminfo=PATH>.	1638	C<--with-terminfo=PATH>.
1499		1639
1500	=item B<DISPLAY>	1640	=item B<DISPLAY>
1501		1641
1502	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1642	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1503	display in its child processes.	1643	display in its child processes if C<-display> isn't used to override. It
		1644	defaults to C<:0> if it doesn't exist.
1504		1645
1505	=item B<SHELL>	1646	=item B<SHELL>
1506		1647
1507	The shell to be used for command execution, defaults to C</bin/sh>.	1648	The shell to be used for command execution, defaults to C</bin/sh>.
1508		1649
1509	=item B<RXVT_SOCKET>	1650	=item B<RXVT_SOCKET> [I<sic>]
1510		1651
1511	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1652	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1512	@@RXVT_NAME@@d(1).	1653	@@RXVT_NAME@@d(1).
1513		1654
1514	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1655	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1656
		1657	=item B<URXVT_PERL_LIB>
		1658
		1659	Additional F<:>-separated library search path for perl extensions. Will be
		1660	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1661	directory.
		1662
		1663	=item B<URXVT_PERL_VERBOSITY>
		1664
		1665	See L<@@RXVT_NAME@@perl>(3).
1515		1666
1516	=item B<HOME>	1667	=item B<HOME>
1517		1668
1518	Used to locate the default directory for the unix domain socket for	1669	Used to locate the default directory for the unix domain socket for
1519	daemon communications and to locate various resource files (such as	1670	daemon communications and to locate various resource files (such as
1520	C<.Xdefaults>)	1671	C<.Xdefaults>)
1521		1672
1522	=item B<XAPPLRESDIR>	1673	=item B<XAPPLRESDIR>
1523		1674
1524	Directory where various X resource files are being located.	1675	Directory where application-specific X resource files are located.
1525		1676
1526	=item B<XENVIRONMENT>	1677	=item B<XENVIRONMENT>
1527		1678
1528	If set and accessible, gives the name of a X resource file to be loaded by	1679	If set and accessible, gives the name of a X resource file to be loaded by
1529	@@RXVT_NAME@@.	1680	@@RXVT_NAME@@.
…		…
1534		1685
1535	=over 4	1686	=over 4
1536		1687
1537	=item B</usr/lib/X11/rgb.txt>	1688	=item B</usr/lib/X11/rgb.txt>
1538		1689
1539	Color names.	1690	Colour names.
1540		1691
1541	=back	1692	=back
1542		1693
1543	=head1 SEE ALSO	1694	=head1 SEE ALSO
1544		1695
		1696	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1545	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1697	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1546		1698
1547	=head1 CURRENT PROJECT COORDINATOR	1699	=head1 CURRENT PROJECT COORDINATOR
1548		1700
1549	=over 4	1701	=over 4
1550		1702
1551	=item Project Coordinator	1703	=item Project Coordinator
1552		1704
1553	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1705	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1554		1706
1555	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1707	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1556		1708
1557	=back	1709	=back
1558		1710
…		…
1562		1714
1563	=item John Bovey	1715	=item John Bovey
1564		1716
1565	University of Kent, 1992, wrote the original Xvt.	1717	University of Kent, 1992, wrote the original Xvt.
1566		1718
1567	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1719	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1568		1720
1569	very heavily modified Xvt and came up with Rxvt	1721	very heavily modified Xvt and came up with Rxvt
1570		1722
1571	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1723	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1572		1724
1573	wrote the Greek Keyboard Input (no longer in code)	1725	wrote the Greek Keyboard Input (no longer in code)
1574		1726
1575	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1727	=item mj olesen <olesen@me.QueensU.CA>
1576		1728
1577	Wrote the menu system.	1729	Wrote the menu system.
1578		1730
1579	Project Coordinator (changes.txt 2.11 to 2.21)	1731	Project Coordinator (changes.txt 2.11 to 2.21)
1580		1732
1581	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1733	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1582		1734
1583	Project Coordinator (changes.txt 2.21a to 2.4.5)	1735	Project Coordinator (changes.txt 2.21a to 2.4.5)
1584		1736
1585	=item Geoff Wing L<< <gcw@pobox.com> >>	1737	=item Geoff Wing <gcw@pobox.com>
1586		1738
1587	Rewrote screen display and text selection routines.	1739	Rewrote screen display and text selection routines.
1588		1740
1589	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1741	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1590		1742
1591	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1743	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1592		1744
1593	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1745	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1594	extension, random hacks, numerous bugfixes and extensions.	1746	extension, random hacks, numerous bugfixes and extensions.
1595		1747
1596	Project Coordinator (Changes 1.0 -)	1748	Project Coordinator (Changes 1.0 -)
1597		1749
1598	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1750	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1599		1751
1600	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1752	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1601		1753
1602	=back	1754	=back
1603		1755

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.140 by sasha, Fri Oct 26 18:27:29 2007 UTC vs. Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.140 by sasha, Fri Oct 26 18:27:29 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC