[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
149		145
150	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
151	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186		149
187	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
188		151
189	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
190		153
191	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
192		155
193	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
194
195	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197	Compile I<afterimage>: Specify image file for the background and also
198	optionally specify its scaling with a geometry string. Note you may need to
199	add quotes to avoid special shell interpretation of the C<;> in the
200	command-line; for more details see resource B<backgroundPixmap>.
201		157
202	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
203		159
204	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
205		161
…		…
264		220
265	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
266		222
267	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
268		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
269	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
270		230
271	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
272	B<utmpInhibit>.	232	B<utmpInhibit>.
273		233
…		…
315		275
316	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
317		277
318	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
319		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
320	=item B<-iconic>	284	=item B<-iconic>
321		285
322	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
323	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
324		288
…		…
340		304
341	=item B<-bl>	305	=item B<-bl>
342		306
343	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
344	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
345	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
346		311
347	=item B<-override-redirect>	312	=item B<-override-redirect>
348		313
349	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
350	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
351		321
352	=item B<-sbg>	322	=item B<-sbg>
353		323
354	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
355	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
359	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
360		330
361	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
362	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
363	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
364		341
365	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
366		343
367	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
368	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
403	=item B<-pt> I<style>	380	=item B<-pt> I<style>
404		381
405	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
406	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
407		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
408	=item B<-im> I<text>	388	=item B<-im> I<text>
409		389
410	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
411		391
412	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
553	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
554	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
555	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
556	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
557		537
558	1. system-wide app-defaults file, either locale-dependent OR global
559	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
560	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
561	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
562	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
563	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
564		544
565	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
566	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
607	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
608	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
609	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
610	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
611	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
612	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
613		593
614	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
615	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
616		596
617	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
628	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
629		609
630	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
631	foreground colour is the default.	611	foreground colour is the default.
632		612
633	=item B<colorRV:> I<colour>
634
635	Use the specified colour as the background for reverse video characters
636	when OPTION_HC is disabled (--disable-frills).
637
638	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
639		614
640	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
641	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
642		627
643	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
644		629
645	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
646	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
653		638
654	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
655		640
656	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
657	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
658	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
659		644
660	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
661		646
662	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
663	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
677		662
678	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
679	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
680	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
681		666
682	=item B<transparent:> I<boolean>
683
684	Turn on/off illusion of a transparent window background.
685
686	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
687	future versions.
688
689	I<Please address all transparency related issues to Sasha Vasko at
690	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
691
692	=item B<fading:> I<number>	667	=item B<fading:> I<number>
693		668
694	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
695		670
696	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
697		672
698	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
699	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
700		675
701	=item B<tintColor:> I<colour>	676	=item B<iconFile:> I<file>
702		677
703	Tint the transparent background pixmap with the given colour; option	678	Set the application icon pixmap; option B<-icon>.
704	B<-tint>.
705
706	=item B<shading:> I<number>
707
708	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
709	in addition to tinting it; option B<-sh>.
710
711	=item B<blendType:> I<string>
712
713	Specify background blending type; option B<-blt>.
714
715	=item B<blurRadius:> I<number>
716
717	Apply Gaussian Blurr with the specified radius to the transparent
718	background image; option B<-blr>.
719		679
720	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
721		681
722	Use the specified colour for the scrollbar [default #B2B2B2].	682	Use the specified colour for the scrollbar [default #B2B2B2].
723		683
…		…
728		688
729	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
730		690
731	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
732	and the text.	692	and the text.
733
734	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
735
736	Use the specified image file for the background and also
737	optionally specify its scaling with a geometry string B<WxH+X+Y>,
738	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
739	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
740	centre (percent). A scale of 0 displays the image with tiling. A scale
741	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
742	an integer number of images in that direction. No image will be magnified
743	beyond 10 times its original size. The maximum permitted scale is 1000.
744	Additional operations can be specified after colon B<:op1:op2...>.
745	Supported operations are:
746
747	tile force background image to be tiled and not scaled. Equivalent to 0x0
748	propscale will scale image keeping proportions
749	auto will scale image to match window size. Equivalent to 100x100
750	hscale will scale image horizontally to the window size
751	vscale will scale image vertically to the window size
752	scale will scale image to match window size
753	root will tile image as if it was a root window background, auto-adjusting
754	whenever terminal window moves
755
756	If used in conjunction with B<-tr> option, the specified pixmap will be
757	blended over transparency image using either alpha-blending, or any
758	other blending type, specified with B<-blt "type"> option.
759
760	=item B<path:> I<path>
761
762	Specify the colon-delimited search path for finding background image files.
763		693
764	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
765		695
766	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
767	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
790	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
791	wide and 15 pixels high.	721	wide and 15 pixels high.
792		722
793	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
794	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
795	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
796	useful supplement.	726	useful supplement.
797		727
798	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
799	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
800	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
851	=item B<urgentOnBell:> I<boolean>	781	=item B<urgentOnBell:> I<boolean>
852		782
853	B<True>: set the urgency hint for the wm on receipt of a bell character.	783	B<True>: set the urgency hint for the wm on receipt of a bell character.
854	B<False>: do not set the urgency hint [default].	784	B<False>: do not set the urgency hint [default].
855		785
		786	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		787
856	=item B<visualBell:> I<boolean>	788	=item B<visualBell:> I<boolean>
857		789
858	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	790	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
859	B<False>: no visual bell [default]; option B<+vb>.	791	B<False>: no visual bell [default]; option B<+vb>.
860		792
…		…
862		794
863	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
864	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
865	[default]; option B<+ls>.	797	[default]; option B<+ls>.
866		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
867	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
868		805
869	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
870	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
871	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
888	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
889		826
890	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
891	the author's favourite.	828	the author's favourite.
892		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
893	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
894		835
895	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
896	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
897		838
…		…
916	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
917	B<+si>.	858	B<+si>.
918		859
919	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
920		861
921	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
922	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
923	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
924		866
925	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
926		868
927	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
928	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
929	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
930	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
931		873
932	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
933		875
934	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
935	resource is limited on most machines to 65535; option B<-sl>.
936		877
937	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
938		879
939	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
940	option B<-b>.	881	option B<-b>.
…		…
984	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
985		926
986	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
987	option B<-bc>.	928	option B<-bc>.
988		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
		934
989	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
990		936
991	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
992	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
993	[default].	939	[default].
…		…
998		944
999	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
1000		946
1001	Mouse pointer background colour.	947	Mouse pointer background colour.
1002		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
1003	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
1004		956
1005	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
1006	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
1007		959
1008	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
1009		961
1010	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
1011	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1012	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
1013	escape sequence.	965	escape sequence.
1014		966
1015	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
1016		968
…		…
1033		985
1034	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1035		987
1036	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
1037		989
1038	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1039		991
1040	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1041		993
1042	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1043		995
…		…
1112	Sets the working directory for the shell (or the command specified via	1064	Sets the working directory for the shell (or the command specified via
1113	B<-e>). The I<path> must be an absolute path and it must exist for	1065	B<-e>). The I<path> must be an absolute path and it must exist for
1114	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1115	directory will be used; option B<-cd>.	1067	directory will be used; option B<-cd>.
1116		1068
1117	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1118		1070
1119	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1120	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1121		1073
1122	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1123	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1124	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1125	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1126	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of the following full or
		1085	abbreviated modifier names:
		1086
		1087	=begin table
		1088
		1089	B<ISOLevel3> B<I>
		1090	B<AppKeypad> B<K>
		1091	B<Control> B<C>
		1092	B<NumLock> B<N>
		1093	B<Shift> B<S>
		1094	B<Meta> B<M> I<or> B<A>
		1095	B<Lock> B<L>
		1096	B<Mod1> B<1>
		1097	B<Mod2> B<2>
		1098	B<Mod3> B<3>
		1099	B<Mod4> B<4>
		1100	B<Mod5> B<5>
		1101
		1102	=end table
1127		1103
1128	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1104	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1129	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1105	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1130	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1106	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1131	current application keymap mode state.	1107	current application keymap mode state.
1132		1108
1133	The spellings of I<key> can be obtained by using B<xev>(1) command or	1109	Due the the large number of modifier combinations, a key mapping will
1134	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1110	match if I<at least> the specified identifiers are being set, and no other
		1111	key mappings with those and more bits are being defined. That means that
		1112	defining a mapping for C<a> will automatically provide definitions for
		1113	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1114	themselves. See the C<builtin:> action, below, for a way to work around
		1115	this when this is a problem.
		1116
		1117	The spelling of I<key> depends on your implementation of X. An easy way to
		1118	find a key name is to use the B<xev>(1) command. You can find a list by
		1119	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1135	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1120	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1136	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1121	value (B<0x0000 - 0xFFFF>).
1137	performed in an exact manner; however, the closest match is assured.
1138		1122
1139	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1123	As with any resource value, the I<action> string may contain backslash
		1124	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1140	number), see RESOURCES in C<man 7 X> for futher details.	1125	number), see RESOURCES in C<man 7 X> for further details.
1141		1126
1142	You can define a range of keysyms in one shot by providing a I<string>	1127	An action starts with an action prefix that selects a certain type
1143	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1128	of action, followed by a colon. An action string without colons is
		1129	interpreted as a literal string to pass to the tty (as if it was
		1130	prefixed with C<string:>).
		1131
		1132	The following action prefixes are known - extensions can provide
		1133	additional prefixes:
		1134
		1135	=over 4
		1136
		1137	=item string:STRING
		1138
		1139	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1140	then the remaining C<STRING> will be passed to the program running in the
		1141	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1142	string C<echo rm -rf /> followed by a newline:
		1143
		1144	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1145
		1146	This could in theory be used to completely redefine your keymap.
		1147
		1148	In addition, for actions of this type, you can define a range of
		1149	keysyms in one shot by loading the C<keysym-list> perl extension and
		1150	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1144	should be a character not used by the strings.	1151	the delimiter `/' should be a character not used by the strings.
1145		1152
1146	Its usage can be demonstrated by an example:	1153	Its usage can be demonstrated by an example:
1147		1154
1148	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1155	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1149		1156
1150	The above line is equivalent to the following three lines:	1157	The above line is equivalent to the following three lines:
1151		1158
1152	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1159	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1153	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1160	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1154	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1161	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1155		1162
		1163	=item command:STRING
		1164
1156	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1165	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1157	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1166	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1167	the opposite of C<string:> - instead of sending it to the program running
		1168	in the terminal, it will be treated as if it were program output). This is
		1169	most useful to feed command sequences into @@RXVT_NAME@@.
		1170
1158	example the following means "change the current locale to C<zh_CN.GBK>	1171	For example the following means "change the current locale to C<zh_CN.GBK>
1159	when Control-Meta-c is being pressed":	1172	when Control-Meta-c is being pressed":
1160		1173
1161	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1162		1175
1163	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1176	The following example will map Control-Meta-1 and Control-Meta-2 to
1164	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1177	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1165	manpage. For example, the F<selection> extension (activated via	1178	font-switching at runtime:
1166	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1167		1179
1168	URxvt.keysym.M-C-c: perl:selection:rot13	1180	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1181	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1169		1182
1170	Due the the large number of modifier combinations, a defined key mapping	1183	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1171	will match if at I<at least> the specified identifiers are being set, and	1184	info):
1172	no other key mappings with those and more bits are being defined. That
1173	means that defining a key map for C<a> will automatically provide
1174	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1175	mappings themselves.
1176		1185
1177	Unfortunately, this will override built-in key mappings. For example	1186	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1187	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1188
		1189	=item builtin:
		1190
		1191	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1192	key binding existed for the key combination. The obvious use is to undo
		1193	the effect of existing bindings. The not so obvious use is to reinstate
		1194	bindings when another binding overrides too many modifiers.
		1195
1178	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1196	For example if you overwrite the C<Insert> key you will disable
1179	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1197	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1180	user-defined keymap using the C<builtin:> replacement:	1198	"holes" into the user-defined keymap using the C<builtin:> replacement:
1181		1199
1182	URxvt.keysym.Insert: <my insert key sequence>	1200	URxvt.keysym.Insert: <my insert key sequence>
1183	URxvt.keysym.S-Insert: builtin:	1201	URxvt.keysym.S-Insert: builtin:
1184		1202
1185	The first line defines a mapping for C<Insert> and I<any> combination	1203	The first line defines a mapping for C<Insert> and I<any> combination
1186	of modifiers. The second line re-establishes the default mapping for	1204	of modifiers. The second line re-establishes the default mapping for
1187	C<Shift-Insert>.	1205	C<Shift-Insert>.
1188		1206
1189	The following example will map Control-Meta-1 and Control-Meta-2 to	1207	=item builtin-string:
1190	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1191	font-switching at runtime:
1192		1208
1193	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1209	This action is mainly useful to restore string mappings for keys that
1194	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1210	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1211	difficult to explain - basically, this action will send the string to the
		1212	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1213	action for it.
1195		1214
1196	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1215	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1197	info):	1216	selection when you press C<Shift-Insert>. With the following bindings, it
		1217	would instead emit the (undocumented, but what applications running in the
		1218	terminal might expect) sequence C<ESC [ 2 $> instead:
1198		1219
1199	URxvt.keysym.M-C-3: command:\033[8;25;80t	1220	URxvt.keysym.S-Insert: builtin-string:
1200	URxvt.keysym.M-C-4: command:\033[8;48;110t	1221	URxvt.keysym.C-S-Insert: builtin:
		1222
		1223	The first line disables the paste functionality for that key
		1224	combination, and the second reinstates the default behaviour for
		1225	C<Control-Shift-Insert>, which would otherwise be overridden.
		1226
		1227	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1228	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1229	this:
		1230
		1231	URxvt.keysym.C-M-c: builtin-string:
		1232	URxvt.keysym.C-M-v: builtin-string:
		1233
		1234	=item EXTENSION:STRING
		1235
		1236	An action of this form invokes the action B<STRING>, if any, provided
		1237	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1238	be loaded automatically if necessary.
		1239
		1240	Not all extensions define actions, but popular extensions that do
		1241	include the I<selection> and I<matcher> extensions (documented in their
		1242	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1243	respectively).
		1244
		1245	From the silly examples department, this will rot13-"encrypt"
		1246	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1247	keyboards:
		1248
		1249	URxvt.keysym.M-C-c: selection:rot13
		1250
		1251	=item perl:STRING DEPRECATED
		1252
		1253	This is a deprecated way of invoking commands provided by perl
		1254	extensions. It is still supported, but should not be used anymore.
		1255
		1256	=back
1201		1257
1202	=item B<perl-ext-common>: I<string>	1258	=item B<perl-ext-common>: I<string>
1203		1259
1204	=item B<perl-ext>: I<string>	1260	=item B<perl-ext>: I<string>
1205		1261
…		…
1207	use in this terminal instance; option B<-pe>.	1263	use in this terminal instance; option B<-pe>.
1208		1264
1209	Extension names can be prefixed with a C<-> sign to prohibit using	1265	Extension names can be prefixed with a C<-> sign to prohibit using
1210	them. This can be useful to selectively disable some extensions loaded	1266	them. This can be useful to selectively disable some extensions loaded
1211	by default, or specified via the C<perl-ext-common> resource. For	1267	by default, or specified via the C<perl-ext-common> resource. For
1212	example, C<default,-selection> will use all the default extension except	1268	example, C<default,-selection> will use all the default extensions except
1213	C<selection>.	1269	C<selection>.
1214		1270
1215	Extension names can also be followed by an argument in angle brackets	1271	The default set includes the C<selection>, C<option-popup>,
1216	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1272	C<selection-popup>, C<readline> and C<searchable-scrollback>
1217	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1273	extensions, and extensions which are mentioned in B<keysym> resources.
1218	multiple times with different arguments will pass multiple arguments to	1274
1219	the extension.	1275	Any extension such that a corresponding resource is given on the
		1276	command line is automatically appended to B<perl-ext>.
1220		1277
1221	Each extension is looked up in the library directories, loaded if	1278	Each extension is looked up in the library directories, loaded if
1222	necessary, and bound to the current terminal instance.	1279	necessary, and bound to the current terminal instance. When the library
		1280	search path contains multiple extension files of the same name, then the
		1281	first one found will be used.
1223		1282
1224	If both of these resources are the empty string, then the perl	1283	If both of these resources are the empty string, then the perl interpreter
1225	interpreter will not be initialized. The idea behind two options is that	1284	will not be initialized. The rationale for having two options is that
1226	B<perl-ext-common> will be used for extensions that should be available to	1285	B<perl-ext-common> will be used for extensions that should be available to
1227	all instances, while B<perl-ext> is used for specific instances.	1286	all instances, while B<perl-ext> is used for specific instances.
1228		1287
1229	=item B<perl-eval>: I<string>	1288	=item B<perl-eval>: I<string>
1230		1289
1231	Perl code to be evaluated when all extensions have been registered. See	1290	Perl code to be evaluated when all extensions have been registered. See
1232	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1291	the @@RXVT_NAME@@perl(3) manpage.
1233	will be ignored when running setuid/setgid.
1234		1292
1235	=item B<perl-lib>: I<path>	1293	=item B<perl-lib>: I<path>
1236		1294
1237	Colon-separated list of additional directories that hold extension	1295	Colon-separated list of additional directories that hold extension
1238	scripts. When looking for extensions specified by the C<perl> resource,	1296	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239	@@RXVT_NAME@@ will first look in these directories and then in	1297	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1298	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241	will be ignored when running setuid/setgid.
1242		1299
1243	See the @@RXVT_NAME@@perl(3) manpage.	1300	See the @@RXVT_NAME@@perl(3) manpage.
1244		1301
1245	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1302	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1246		1303
…		…
1250	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1307	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1251		1308
1252	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1309	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1253	for details.	1310	for details.
1254		1311
1255	=item B<searchable-scrollback:> I<keysym>	1312	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1256		1313
1257	Sets the hotkey that starts the incremental scrollback buffer search	1314	This resource is deprecated and will be removed. Use a B<keysym> resource
1258	(default: C<M-s>).	1315	instead, e.g.:
1259		1316
		1317	URxvt.keysym.M-s: searchable-scrollback:start
		1318
1260	=item B<urlLauncher>: I<string>	1319	=item B<url-launcher>: I<string>
1261		1320
1262	Specifies the program to be started with a URL argument. Used by the	1321	Specifies the program to be started with a URL argument. Used by the
1263	C<selection-popup> and C<matcher> perl extensions.	1322	C<selection-popup> and C<matcher> perl extensions.
1264		1323
1265	=item B<transient-for>: I<windowid>	1324	=item B<transient-for>: I<windowid>
…		…
1268		1327
1269	=item B<override-redirect>: I<boolean>	1328	=item B<override-redirect>: I<boolean>
1270		1329
1271	Compile I<frills>: Sets override-redirect for the terminal window, making	1330	Compile I<frills>: Sets override-redirect for the terminal window, making
1272	it almost invisible to window managers; option B<-override-redirect>.	1331	it almost invisible to window managers; option B<-override-redirect>.
		1332
		1333	=item B<iso14755:> I<boolean>
		1334
		1335	Turn on/off ISO 14755 (default enabled).
1273		1336
1274	=item B<iso14755_52:> I<boolean>	1337	=item B<iso14755_52:> I<boolean>
1275		1338
1276	Turn on/off ISO 14755 5.2 mode (default enabled).	1339	Turn on/off ISO 14755 5.2 mode (default enabled).
1277		1340
…		…
1329	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1392	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1330	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1393	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1331		1394
1332	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1395	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1333	inserted too.	1396	inserted too.
		1397
		1398	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1399	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1400	binding causes the value of the internal selection to be copied to the
		1401	CLIPBOARD selection, while the second binding causes the value of the
		1402	CLIPBOARD selection to be inserted.
1334		1403
1335	=back	1404	=back
1336		1405
1337	=head1 CHANGING FONTS	1406	=head1 CHANGING FONTS
1338		1407
…		…
1420	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1489	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1421	it can be seen via the I<who(1)> command, and can accept messages. To	1490	it can be seen via the I<who(1)> command, and can accept messages. To
1422	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1491	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1423	on some systems or setgid to root or to some other group on others.	1492	on some systems or setgid to root or to some other group on others.
1424		1493
1425	=head1 COLORS AND GRAPHICS	1494	=head1 COLOURS AND GRAPHICS
1426		1495
1427	In addition to the default foreground and background colours,	1496	In addition to the default foreground and background colours,
1428	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1497	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1429	high-intensity bold/blink versions of the same). Here is a list of the	1498	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1430	colours with their names.	1499	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1500	cube plus a 8 (24) colour greyscale ramp.
		1501
		1502	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1503	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1504	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1505	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1506	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1507	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1508	use many similar 24-bit colours. It's typically not a problem in common
		1509	scenarios.
		1510
		1511	Here is a list of the ANSI colours with their names.
1431		1512
1432	=begin table	1513	=begin table
1433		1514
1434	B<color0> (black) = Black	1515	B<color0> (black) = Black
1435	B<color1> (red) = Red3	1516	B<color1> (red) = Red3
…		…
1455	It is also possible to specify the colour values of B<foreground>,	1536	It is also possible to specify the colour values of B<foreground>,
1456	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1537	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1457	a number 0-15, as a convenient shorthand to reference the colour name of	1538	a number 0-15, as a convenient shorthand to reference the colour name of
1458	color0-color15.	1539	color0-color15.
1459		1540
1460	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1541	The following text gives values for the standard 88 colour mode (and
1461	additional 72 colours. The first 64 of those (with indices 16 to 79)	1542	values for the 256 colour mode in parentheses).
1462	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1463	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1464		1543
		1544	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1545
		1546	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1547	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1548
		1549	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1550	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1551	the RGB cube.
		1552
1465	Together, all those colours implement the 88 colour xterm colours. Only	1553	Together, all those colours implement the 88 (256) colour xterm
1466	the first 16 can be changed using resources currently, the rest can only	1554	colours. Only the first 16 can be changed using resources currently, the
1467	be changed via command sequences ("escape codes").	1555	rest can only be changed via command sequences ("escape codes").
		1556
		1557	Applications are advised to use terminfo or command sequences to discover
		1558	number and RGB values of all colours (yes, you can query this...).
1468		1559
1469	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1560	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1470	always swapping the foreground/background colours. This is in contrast to	1561	always swapping the foreground/background colours. This is in contrast to
1471	I<xterm>(1) where the colours are only swapped if they have not otherwise	1562	I<xterm>(1) where the colours are only swapped if they have not otherwise
1472	been specified. For example,	1563	been specified. For example,
1473		1564
1474	=over 4
1475
1476	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1565	@@RXVT_NAME@@ -fg Black -bg White -rv
1477		1566
1478	would yield White on Black, while on I<xterm>(1) it would yield Black	1567	would yield White on Black, while on I<xterm>(1) it would yield Black on
1479	on White.	1568	White.
1480
1481	=back
1482		1569
1483	=head2 ALPHA CHANNEL SUPPORT	1570	=head2 ALPHA CHANNEL SUPPORT
1484		1571
1485	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1572	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1486	their act together, rxvt-unicode will do it's own alpha channel management:	1573	their act together, rxvt-unicode will do its own alpha channel management:
1487		1574
1488	You can prefix any color with an opaquenes percentage enclosed in	1575	You can prefix any colour with an opaqueness percentage enclosed in
1489	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1576	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1490	(0-100) that specifies the opacity of the color, where C<0> is completely	1577	(0-100) that specifies the opacity of the colour, where C<0> is completely
1491	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1578	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1492	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1579	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1493	is the recommended format to specify transparency values, and works with	1580	is the recommended format to specify transparency values, and works with
1494	all ways to specify a colour.	1581	all ways to specify a colour.
1495		1582
…		…
1573		1660
1574	=item B<SHELL>	1661	=item B<SHELL>
1575		1662
1576	The shell to be used for command execution, defaults to C</bin/sh>.	1663	The shell to be used for command execution, defaults to C</bin/sh>.
1577		1664
1578	=item B<RXVT_SOCKET>	1665	=item B<RXVT_SOCKET> [I<sic>]
1579		1666
1580	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1667	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1581	@@RXVT_NAME@@d(1).	1668	@@RXVT_NAME@@d(1).
1582		1669
1583	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1670	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1671
		1672	=item B<URXVT_PERL_LIB>
		1673
		1674	Additional F<:>-separated library search path for perl extensions. Will be
		1675	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1676	directory.
		1677
		1678	=item B<URXVT_PERL_VERBOSITY>
		1679
		1680	See L<@@RXVT_NAME@@perl>(3).
1584		1681
1585	=item B<HOME>	1682	=item B<HOME>
1586		1683
1587	Used to locate the default directory for the unix domain socket for	1684	Used to locate the default directory for the unix domain socket for
1588	daemon communications and to locate various resource files (such as	1685	daemon communications and to locate various resource files (such as
1589	C<.Xdefaults>)	1686	C<.Xdefaults>)
1590		1687
1591	=item B<XAPPLRESDIR>	1688	=item B<XAPPLRESDIR>
1592		1689
1593	Directory where various X resource files are being located.	1690	Directory where application-specific X resource files are located.
1594		1691
1595	=item B<XENVIRONMENT>	1692	=item B<XENVIRONMENT>
1596		1693
1597	If set and accessible, gives the name of a X resource file to be loaded by	1694	If set and accessible, gives the name of a X resource file to be loaded by
1598	@@RXVT_NAME@@.	1695	@@RXVT_NAME@@.
…		…
1603		1700
1604	=over 4	1701	=over 4
1605		1702
1606	=item B</usr/lib/X11/rgb.txt>	1703	=item B</usr/lib/X11/rgb.txt>
1607		1704
1608	Color names.	1705	Colour names.
1609		1706
1610	=back	1707	=back
1611		1708
1612	=head1 SEE ALSO	1709	=head1 SEE ALSO
1613		1710
		1711	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1614	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1712	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1615		1713
1616	=head1 CURRENT PROJECT COORDINATOR	1714	=head1 CURRENT PROJECT COORDINATOR
1617		1715
1618	=over 4	1716	=over 4
1619		1717
1620	=item Project Coordinator	1718	=item Project Coordinator
1621		1719
1622	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1720	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1623		1721
1624	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1722	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1625		1723
1626	=back	1724	=back
1627		1725
…		…
1631		1729
1632	=item John Bovey	1730	=item John Bovey
1633		1731
1634	University of Kent, 1992, wrote the original Xvt.	1732	University of Kent, 1992, wrote the original Xvt.
1635		1733
1636	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1734	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1637		1735
1638	very heavily modified Xvt and came up with Rxvt	1736	very heavily modified Xvt and came up with Rxvt
1639		1737
1640	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1738	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1641		1739
1642	wrote the Greek Keyboard Input (no longer in code)	1740	wrote the Greek Keyboard Input (no longer in code)
1643		1741
1644	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1742	=item mj olesen <olesen@me.QueensU.CA>
1645		1743
1646	Wrote the menu system.	1744	Wrote the menu system.
1647		1745
1648	Project Coordinator (changes.txt 2.11 to 2.21)	1746	Project Coordinator (changes.txt 2.11 to 2.21)
1649		1747
1650	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1748	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1651		1749
1652	Project Coordinator (changes.txt 2.21a to 2.4.5)	1750	Project Coordinator (changes.txt 2.21a to 2.4.5)
1653		1751
1654	=item Geoff Wing L<< <gcw@pobox.com> >>	1752	=item Geoff Wing <gcw@pobox.com>
1655		1753
1656	Rewrote screen display and text selection routines.	1754	Rewrote screen display and text selection routines.
1657		1755
1658	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1756	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1659		1757
1660	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1758	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1661		1759
1662	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1760	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1663	extension, random hacks, numerous bugfixes and extensions.	1761	extension, random hacks, numerous bugfixes and extensions.
1664		1762
1665	Project Coordinator (Changes 1.0 -)	1763	Project Coordinator (Changes 1.0 -)
1666		1764
1667	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1765	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1668		1766
1669	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1767	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1670		1768
1671	=back	1769	=back
1672		1770

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs. Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.250 by root, Sat Oct 10 20:06:45 2020 UTC