[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.179 by root, Sun May 23 01:06:47 2010 UTC vs.
Revision 1.252 by sf-exg, Sat Jul 3 15:32:32 2021 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colours essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
357		311
358	=item B<-override-redirect>	312	=item B<-override-redirect>
359		313
360	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
361	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
362		321
363	=item B<-sbg>	322	=item B<-sbg>
364		323
365	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
366	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
421	=item B<-pt> I<style>	380	=item B<-pt> I<style>
422		381
423	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
424	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
425		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
426	=item B<-im> I<text>	388	=item B<-im> I<text>
427		389
428	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
429		391
430	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
444	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
445	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
446	in-use. Instead of selecting a full line it will extend the selection to	408	in-use. Instead of selecting a full line it will extend the selection to
447	the end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
448		410
		411	=item B<-dpb>\|B<+dpb>
		412
		413	Compile frills: Disables (or enables) emitting bracketed paste mode
		414	sequences (default enabled). Bracketed paste mode allows programs
		415	to detect when something is pasted. Since more and more programs
		416	abuse this, these sequences can be disabled. The command sequences to
		417	enable and query paste mode will still work, but the actual bracket
		418	sequences will no longer be emitted. You can also toggle this from the
		419	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		420
449	=item B<-insecure>	421	=item B<-insecure>
450		422
451	Enable "insecure" mode, which currently enables most of the escape	423	Enable "insecure" mode, which currently enables most of the escape
452	sequences that echo strings. See the resource B<insecure> for more	424	sequences that echo strings. See the resource B<insecure> for more
453	info.	425	info.
…		…
465		437
466	=item B<-ssr>\|B<+ssr>	438	=item B<-ssr>\|B<+ssr>
467		439
468	Turn on/off secondary screen scroll (default enabled); resource	440	Turn on/off secondary screen scroll (default enabled); resource
469	B<secondaryScroll>.	441	B<secondaryScroll>.
		442
		443	=item B<-rm> I<mode>
		444
		445	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		446	to one of B<auto> (the default), B<always> or B<never>. The latter two
		447	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		448	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		449	B<rewrapMode>.
470		450
471	=item B<-hold>\|B<+hold>	451	=item B<-hold>\|B<+hold>
472		452
473	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	453	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
474	will not immediately destroy its window when the program executed within	454	will not immediately destroy its window when the program executed within
…		…
571	You can set and change the resources using X11 tools like B<xrdb>. Many	551	You can set and change the resources using X11 tools like B<xrdb>. Many
572	distribution do also load settings from the B<~/.Xresources> file when X	552	distribution do also load settings from the B<~/.Xresources> file when X
573	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	553	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
574	with later settings overwriting earlier ones:	554	with later settings overwriting earlier ones:
575		555
576	1. system-wide app-defaults file, either locale-dependent OR global
577	2. app-defaults file in $XAPPLRESDIR	556	1. app-defaults file in $XAPPLRESDIR
		557	2. $HOME/.Xdefaults
578	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	558	3. RESOURCE_MANAGER property on root-window of screen 0
579	4. SCREEN_RESOURCES for the current screen	559	4. SCREEN_RESOURCES property on root-window of the current screen
580	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	560	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
581	6. resources specified via -xrm on the commandline	561	6. resources specified via -xrm on the commandline
582		562
583	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	563	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
584	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	564	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
700		680
701	B<False>: specify that everything is to be displayed, even	681	B<False>: specify that everything is to be displayed, even
702	if the refresh is too fast for the human eye to read anything (or the	682	if the refresh is too fast for the human eye to read anything (or the
703	monitor to display anything); option B<+ss>.	683	monitor to display anything); option B<+ss>.
704		684
705	=item B<transparent:> I<boolean>
706
707	Turn on/off illusion of a transparent window background.
708
709	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
710	future versions.
711
712	I<Please address all transparency related issues to Sasha Vasko at
713	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
714
715	=item B<fading:> I<number>	685	=item B<fading:> I<number>
716		686
717	Fade the text by the given percentage when focus is lost; option B<-fade>.	687	Fade the text by the given percentage when focus is lost; option B<-fade>.
718		688
719	=item B<fadeColor:> I<colour>	689	=item B<fadeColor:> I<colour>
720		690
721	Fade to this colour, when fading is used (see B<fading:>). The default	691	Fade to this colour, when fading is used (see B<fading:>). The default
722	colour is black; option B<-fadecolor>.	692	colour is black; option B<-fadecolor>.
723		693
724	=item B<tintColor:> I<colour>
725
726	Tint the transparent background pixmap with the given colour; option
727	B<-tint>.
728
729	=item B<shading:> I<number>
730
731	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
732	in addition to tinting it; option B<-sh>.
733
734	=item B<blendType:> I<string>
735
736	Specify background blending type; option B<-blt>.
737
738	=item B<blurRadius:> I<number>
739
740	Apply gaussian blur with the specified radius to the transparent
741	background image; option B<-blr>.
742
743	=item B<iconFile:> I<file>	694	=item B<iconFile:> I<file>
744		695
745	Set the application icon pixmap; option B<-icon>.	696	Set the application icon pixmap; option B<-icon>.
746		697
747	=item B<scrollColor:> I<colour>	698	=item B<scrollColor:> I<colour>
…		…
755		706
756	=item B<borderColor:> I<colour>	707	=item B<borderColor:> I<colour>
757		708
758	The colour of the border around the text area and between the scrollbar	709	The colour of the border around the text area and between the scrollbar
759	and the text.	710	and the text.
760
761	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
762
763	Use the specified image file for the background and also
764	optionally specify its scaling with a geometry string B<WxH+X+Y>,
765	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
766	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
767	centre (percent). A scale of 0 displays the image with tiling. A scale
768	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
769	an integer number of images in that direction. No image will be magnified
770	beyond 10 times its original size. The maximum permitted scale is 1000.
771	Additional operations can be specified after colon B<:op1:op2...>.
772	Supported operations are:
773
774	tile force background image to be tiled and not scaled. Equivalent to 0x0
775	propscale will scale image keeping proportions
776	auto will scale image to match window size. Equivalent to 100x100
777	hscale will scale image horizontally to the window size
778	vscale will scale image vertically to the window size
779	scale will scale image to match window size
780	root will tile image as if it was a root window background, auto-adjusting
781	whenever terminal window moves
782
783	If used in conjunction with B<-tr> option, the specified pixmap will be
784	blended over transparency image using either alpha-blending, or any
785	other blending type, specified with B<-blt "type"> option.
786
787	=item B<path:> I<path>
788
789	Specify the colon-delimited search path for finding background image files.
790		711
791	=item B<font:> I<fontlist>	712	=item B<font:> I<fontlist>
792		713
793	Select the fonts to be used. This is a comma separated list of font names	714	Select the fonts to be used. This is a comma separated list of font names
794	that are checked in order when trying to find glyphs for characters. The	715	that are checked in order when trying to find glyphs for characters. The
…		…
891		812
892	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	813	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
893	the shell; option B<-ls>. B<False>: start as a normal sub-shell	814	the shell; option B<-ls>. B<False>: start as a normal sub-shell
894	[default]; option B<+ls>.	815	[default]; option B<+ls>.
895		816
		817	=item B<multiClickTime:> I<number>
		818
		819	Specify the maximum time in milliseconds between multi-click select
		820	events. The default is 500 milliseconds; option B<-mc>.
		821
896	=item B<utmpInhibit:> I<boolean>	822	=item B<utmpInhibit:> I<boolean>
897		823
898	B<True>: inhibit writing record into the system log file B<utmp>;	824	B<True>: inhibit writing record into the system log file B<utmp>;
899	option B<-ut>. B<False>: write record into the system log file B<utmp>	825	option B<-ut>. B<False>: write record into the system log file B<utmp>
900	[default]; option B<+ut>.	826	[default]; option B<+ut>.
…		…
917	=item B<scrollstyle:> I<mode>	843	=item B<scrollstyle:> I<mode>
918		844
919	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	845	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
920	the author's favourite.	846	the author's favourite.
921		847
		848	=item B<thickness:> I<number>
		849
		850	Set the scrollbar width in pixels.
		851
922	=item B<scrollBar:> I<boolean>	852	=item B<scrollBar:> I<boolean>
923		853
924	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	854	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
925	disable the scrollbar; option B<+sb>.	855	disable the scrollbar; option B<+sb>.
926		856
…		…
945	B<False>: do not scroll to bottom when tty receives output; option	875	B<False>: do not scroll to bottom when tty receives output; option
946	B<+si>.	876	B<+si>.
947		877
948	=item B<scrollWithBuffer:> I<boolean>	878	=item B<scrollWithBuffer:> I<boolean>
949		879
950	B<True>: scroll with scrollback buffer when tty receives new lines (and	880	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
951	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	881	try to show the same lines) and B<scrollTtyOutput> is False; option
952	with scrollback buffer when tty receives new lines; option B<+sw>.	882	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		883	new lines; option B<+sw>.
953		884
954	=item B<scrollTtyKeypress:> I<boolean>	885	=item B<scrollTtyKeypress:> I<boolean>
955		886
956	B<True>: scroll to bottom when a non-special key is pressed. Special keys	887	B<True>: scroll to bottom when a non-special key is pressed. Special keys
957	are those which are intercepted by rxvt-unicode for special handling and	888	are those which are intercepted by rxvt-unicode for special handling and
958	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	889	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
959	bottom when a non-special key is pressed; option B<+sk>.	890	bottom when a non-special key is pressed; option B<+sk>.
960		891
961	=item B<saveLines:> I<number>	892	=item B<saveLines:> I<number>
962		893
963	Save I<number> lines in the scrollback buffer [default 64]. This	894	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
964	resource is limited on most machines to 65535; option B<-sl>.
965		895
966	=item B<internalBorder:> I<number>	896	=item B<internalBorder:> I<number>
967		897
968	Internal border of I<number> pixels. This resource is limited to 100;	898	Internal border of I<number> pixels. This resource is limited to 100;
969	option B<-b>.	899	option B<-b>.
…		…
1032		962
1033	=item B<pointerColor2:> I<colour>	963	=item B<pointerColor2:> I<colour>
1034		964
1035	Mouse pointer background colour.	965	Mouse pointer background colour.
1036		966
		967	=item B<pointerShape:> I<string>
		968
		969	Compile I<frills>: Specifies the name of the mouse pointer shape
		970	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		971	file for possible values (omit the C<XC_> prefix).
		972
1037	=item B<pointerBlankDelay:> I<number>	973	=item B<pointerBlankDelay:> I<number>
1038		974
1039	Specifies number of seconds before blanking the pointer [default 2]. Use a	975	Specifies number of seconds before blanking the pointer [default 2]. Use a
1040	large number (e.g. C<987654321>) to effectively disable the timeout.	976	large number (e.g. C<987654321>) to effectively disable the timeout.
1041		977
1042	=item B<backspacekey:> I<string>	978	=item B<backspacekey:> I<string>
1043		979
1044	The string to send when the backspace key is pressed. If set to B<DEC>	980	The string to send when the backspace key is pressed. If set to B<DEC>
1045	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	981	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1046	(code 8) - which can be reversed with the appropriate DEC private mode	982	(code 8) - which can be reversed with the appropriate DEC private mode
1047	escape sequence.	983	escape sequence.
1048		984
1049	=item B<deletekey:> I<string>	985	=item B<deletekey:> I<string>
1050		986
…		…
1067		1003
1068	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1004	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1069		1005
1070	=item B<preeditType:> I<style>	1006	=item B<preeditType:> I<style>
1071		1007
1072	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1008	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1073		1009
1074	=item B<inputMethod:> I<name>	1010	=item B<inputMethod:> I<name>
1075		1011
1076	I<name> of inputMethod to use; option B<-im>.	1012	I<name> of inputMethod to use; option B<-im>.
1077		1013
…		…
1094	=item B<tripleclickwords:> I<boolean>	1030	=item B<tripleclickwords:> I<boolean>
1095		1031
1096	Change the meaning of triple-click selection with the left mouse	1032	Change the meaning of triple-click selection with the left mouse
1097	button. Instead of selecting a full line it will extend the selection to	1033	button. Instead of selecting a full line it will extend the selection to
1098	the end of the logical line only; option B<-tcw>.	1034	the end of the logical line only; option B<-tcw>.
		1035
		1036	=item B<disablePasteBrackets:> I<boolean>
		1037
		1038	Prevents emission of paste bracket sequences; option B<-dpb>.
1099		1039
1100	=item B<insecure:> I<boolean>	1040	=item B<insecure:> I<boolean>
1101		1041
1102	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1042	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that
1103	echo arbitrary strings like the icon name or the locale. This could be	1043	echo arbitrary strings like the icon name or the locale. This could be
…		…
1125		1065
1126	=item B<secondaryScreen:> I<boolean>	1066	=item B<secondaryScreen:> I<boolean>
1127		1067
1128	Turn on/off secondary screen (default enabled).	1068	Turn on/off secondary screen (default enabled).
1129		1069
		1070	=item B<rewrapMode:> I<mode>
		1071
		1072	Sets long line rewrap behaviour on window resize to one of B<auto>
		1073	(default), B<always> or B<never>.
		1074
1130	=item B<secondaryScroll:> I<boolean>	1075	=item B<secondaryScroll:> I<boolean>
1131		1076
1132	Turn on/off secondary screen scroll (default enabled). If this	1077	Turn on/off secondary screen scroll (default enabled). If this
1133	option is enabled, scrolls on the secondary screen will change the	1078	option is enabled, scrolls on the secondary screen will change the
1134	scrollback buffer and, when secondaryScreen is off, switching	1079	scrollback buffer and, when secondaryScreen is off, switching
…		…
1146	Sets the working directory for the shell (or the command specified via	1091	Sets the working directory for the shell (or the command specified via
1147	B<-e>). The I<path> must be an absolute path and it must exist for	1092	B<-e>). The I<path> must be an absolute path and it must exist for
1148	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1093	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1149	directory will be used; option B<-cd>.	1094	directory will be used; option B<-cd>.
1150		1095
1151	=item B<keysym.>I<sym>: I<string>	1096	=item B<keysym.>I<sym>: I<action>
1152		1097
1153	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1098	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1154	intervening resource name B<keysym.> cannot be omitted.	1099	resource name B<keysym.> cannot be omitted.
1155		1100
1156	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1101	Using this resource, you can map key combinations such as
1157	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1102	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1158	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1103	string than would normally result from that combination, making the
1159	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1104	terminal scroll up or down the way you want it, or any other thing an
1160	B<2>, B<3>, B<4>, B<5>.	1105	extension might provide.
		1106
		1107	The key combination that triggers the action, I<sym>, has the following format:
		1108
		1109	(modifiers-)key
		1110
		1111	Where I<modifiers> can be any combination of the following full or
		1112	abbreviated modifier names:
		1113
		1114	=begin table
		1115
		1116	B<ISOLevel3> B<I>
		1117	B<AppKeypad> B<K>
		1118	B<Control> B<C>
		1119	B<NumLock> B<N>
		1120	B<Shift> B<S>
		1121	B<Meta> B<M> I<or> B<A>
		1122	B<Lock> B<L>
		1123	B<Mod1> B<1>
		1124	B<Mod2> B<2>
		1125	B<Mod3> B<3>
		1126	B<Mod4> B<4>
		1127	B<Mod5> B<5>
		1128
		1129	=end table
1161		1130
1162	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1131	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1163	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1132	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1164	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1133	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1165	current application keymap mode state.	1134	current application keymap mode state.
1166		1135
1167	The spellings of I<key> can be obtained by using B<xev>(1) command or	1136	Due the the large number of modifier combinations, a key mapping will
1168	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1137	match if I<at least> the specified identifiers are being set, and no other
		1138	key mappings with those and more bits are being defined. That means that
		1139	defining a mapping for C<a> will automatically provide definitions for
		1140	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1141	themselves. See the C<builtin:> action, below, for a way to work around
		1142	this when this is a problem.
		1143
		1144	The spelling of I<key> depends on your implementation of X. An easy way to
		1145	find a key name is to use the B<xev>(1) command. You can find a list by
		1146	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1169	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1147	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1170	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1148	value (B<0x0000 - 0xFFFF>).
1171	performed in an exact manner; however, the closest match is assured.
1172		1149
1173	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1150	As with any resource value, the I<action> string may contain backslash
		1151	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1174	number), see RESOURCES in C<man 7 X> for futher details.	1152	number), see RESOURCES in C<man 7 X> for further details.
1175		1153
1176	You can define a range of keysyms in one shot by providing a I<string>	1154	An action starts with an action prefix that selects a certain type
1177	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1155	of action, followed by a colon. An action string without colons is
		1156	interpreted as a literal string to pass to the tty (as if it was
		1157	prefixed with C<string:>).
		1158
		1159	The following action prefixes are known - extensions can provide
		1160	additional prefixes:
		1161
		1162	=over 4
		1163
		1164	=item string:STRING
		1165
		1166	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1167	then the remaining C<STRING> will be passed to the program running in the
		1168	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1169	string C<echo rm -rf /> followed by a newline:
		1170
		1171	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1172
		1173	This could in theory be used to completely redefine your keymap.
		1174
		1175	In addition, for actions of this type, you can define a range of
		1176	keysyms in one shot by loading the C<keysym-list> perl extension and
		1177	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1178	should be a character not used by the strings.	1178	the delimiter `/' should be a character not used by the strings.
1179		1179
1180	Its usage can be demonstrated by an example:	1180	Its usage can be demonstrated by an example:
1181		1181
1182	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1182	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1183		1183
1184	The above line is equivalent to the following three lines:	1184	The above line is equivalent to the following three lines:
1185		1185
1186	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1186	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1187	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1187	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1188	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1188	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1189		1189
		1190	=item command:STRING
		1191
1190	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1192	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1191	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1193	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1194	the opposite of C<string:> - instead of sending it to the program running
		1195	in the terminal, it will be treated as if it were program output). This is
		1196	most useful to feed command sequences into @@RXVT_NAME@@.
		1197
1192	example the following means "change the current locale to C<zh_CN.GBK>	1198	For example the following means "change the current locale to C<zh_CN.GBK>
1193	when Control-Meta-c is being pressed":	1199	when Control-Meta-c is being pressed":
1194		1200
1195	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1201	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1196		1202
1197	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1203	The following example will map Control-Meta-1 and Control-Meta-2 to
1198	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1204	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1199	manpage. For example, the F<selection> extension (activated via	1205	font-switching at runtime:
1200	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1201		1206
1202	URxvt.keysym.M-C-c: perl:selection:rot13	1207	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1208	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1203		1209
1204	Due the the large number of modifier combinations, a defined key mapping	1210	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1205	will match if at I<at least> the specified identifiers are being set, and	1211	info):
1206	no other key mappings with those and more bits are being defined. That
1207	means that defining a key map for C<a> will automatically provide
1208	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1209	mappings themselves.
1210		1212
1211	Unfortunately, this will override built-in key mappings. For example	1213	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1214	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1215
		1216	=item builtin:
		1217
		1218	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1219	key binding existed for the key combination. The obvious use is to undo
		1220	the effect of existing bindings. The not so obvious use is to reinstate
		1221	bindings when another binding overrides too many modifiers.
		1222
1212	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1223	For example if you overwrite the C<Insert> key you will disable
1213	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1224	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1214	user-defined keymap using the C<builtin:> replacement:	1225	"holes" into the user-defined keymap using the C<builtin:> replacement:
1215		1226
1216	URxvt.keysym.Insert: <my insert key sequence>	1227	URxvt.keysym.Insert: <my insert key sequence>
1217	URxvt.keysym.S-Insert: builtin:	1228	URxvt.keysym.S-Insert: builtin:
1218		1229
1219	The first line defines a mapping for C<Insert> and I<any> combination	1230	The first line defines a mapping for C<Insert> and I<any> combination
1220	of modifiers. The second line re-establishes the default mapping for	1231	of modifiers. The second line re-establishes the default mapping for
1221	C<Shift-Insert>.	1232	C<Shift-Insert>.
1222		1233
1223	The following example will map Control-Meta-1 and Control-Meta-2 to	1234	=item builtin-string:
1224	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1225	font-switching at runtime:
1226		1235
1227	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1236	This action is mainly useful to restore string mappings for keys that
1228	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1237	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1238	difficult to explain - basically, this action will send the string to the
		1239	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1240	action for it.
1229		1241
1230	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1242	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1231	info):	1243	selection when you press C<Shift-Insert>. With the following bindings, it
		1244	would instead emit the (undocumented, but what applications running in the
		1245	terminal might expect) sequence C<ESC [ 2 $> instead:
1232		1246
1233	URxvt.keysym.M-C-3: command:\033[8;25;80t	1247	URxvt.keysym.S-Insert: builtin-string:
1234	URxvt.keysym.M-C-4: command:\033[8;48;110t	1248	URxvt.keysym.C-S-Insert: builtin:
		1249
		1250	The first line disables the paste functionality for that key
		1251	combination, and the second reinstates the default behaviour for
		1252	C<Control-Shift-Insert>, which would otherwise be overridden.
		1253
		1254	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1255	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1256	this:
		1257
		1258	URxvt.keysym.C-M-c: builtin-string:
		1259	URxvt.keysym.C-M-v: builtin-string:
		1260
		1261	=item EXTENSION:STRING
		1262
		1263	An action of this form invokes the action B<STRING>, if any, provided
		1264	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1265	be loaded automatically if necessary.
		1266
		1267	Not all extensions define actions, but popular extensions that do
		1268	include the I<selection> and I<matcher> extensions (documented in their
		1269	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1270	respectively).
		1271
		1272	From the silly examples department, this will rot13-"encrypt"
		1273	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1274	keyboards:
		1275
		1276	URxvt.keysym.M-C-c: selection:rot13
		1277
		1278	=item perl:STRING DEPRECATED
		1279
		1280	This is a deprecated way of invoking commands provided by perl
		1281	extensions. It is still supported, but should not be used anymore.
		1282
		1283	=back
1235		1284
1236	=item B<perl-ext-common>: I<string>	1285	=item B<perl-ext-common>: I<string>
1237		1286
1238	=item B<perl-ext>: I<string>	1287	=item B<perl-ext>: I<string>
1239		1288
…		…
1241	use in this terminal instance; option B<-pe>.	1290	use in this terminal instance; option B<-pe>.
1242		1291
1243	Extension names can be prefixed with a C<-> sign to prohibit using	1292	Extension names can be prefixed with a C<-> sign to prohibit using
1244	them. This can be useful to selectively disable some extensions loaded	1293	them. This can be useful to selectively disable some extensions loaded
1245	by default, or specified via the C<perl-ext-common> resource. For	1294	by default, or specified via the C<perl-ext-common> resource. For
1246	example, C<default,-selection> will use all the default extension except	1295	example, C<default,-selection> will use all the default extensions except
1247	C<selection>.	1296	C<selection>.
1248		1297
1249	Extension names can also be followed by an argument in angle brackets	1298	The default set includes the C<selection>, C<option-popup>,
1250	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1299	C<selection-popup>, C<readline> and C<searchable-scrollback>
1251	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1300	extensions, and extensions which are mentioned in B<keysym> resources.
1252	multiple times with different arguments will pass multiple arguments to	1301
1253	the extension.	1302	Any extension such that a corresponding resource is given on the
		1303	command line is automatically appended to B<perl-ext>.
1254		1304
1255	Each extension is looked up in the library directories, loaded if	1305	Each extension is looked up in the library directories, loaded if
1256	necessary, and bound to the current terminal instance.	1306	necessary, and bound to the current terminal instance. When the library
		1307	search path contains multiple extension files of the same name, then the
		1308	first one found will be used.
1257		1309
1258	If both of these resources are the empty string, then the perl	1310	If both of these resources are the empty string, then the perl interpreter
1259	interpreter will not be initialized. The idea behind two options is that	1311	will not be initialized. The rationale for having two options is that
1260	B<perl-ext-common> will be used for extensions that should be available to	1312	B<perl-ext-common> will be used for extensions that should be available to
1261	all instances, while B<perl-ext> is used for specific instances.	1313	all instances, while B<perl-ext> is used for specific instances.
1262		1314
1263	=item B<perl-eval>: I<string>	1315	=item B<perl-eval>: I<string>
1264		1316
…		…
1266	the @@RXVT_NAME@@perl(3) manpage.	1318	the @@RXVT_NAME@@perl(3) manpage.
1267		1319
1268	=item B<perl-lib>: I<path>	1320	=item B<perl-lib>: I<path>
1269		1321
1270	Colon-separated list of additional directories that hold extension	1322	Colon-separated list of additional directories that hold extension
1271	scripts. When looking for extensions specified by the C<perl> resource,	1323	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1272	@@RXVT_NAME@@ will first look in these directories and then in	1324	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1273	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1325	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1274		1326
1275	See the @@RXVT_NAME@@perl(3) manpage.	1327	See the @@RXVT_NAME@@perl(3) manpage.
1276		1328
1277	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1329	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1278		1330
…		…
1282	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1334	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1283		1335
1284	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1336	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1285	for details.	1337	for details.
1286		1338
1287	=item B<searchable-scrollback:> I<keysym>	1339	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1288		1340
1289	Sets the hotkey that starts the incremental scrollback buffer search	1341	This resource is deprecated and will be removed. Use a B<keysym> resource
1290	(default: C<M-s>).	1342	instead, e.g.:
1291		1343
		1344	URxvt.keysym.M-s: searchable-scrollback:start
		1345
1292	=item B<urlLauncher>: I<string>	1346	=item B<url-launcher>: I<string>
1293		1347
1294	Specifies the program to be started with a URL argument. Used by the	1348	Specifies the program to be started with a URL argument. Used by the
1295	C<selection-popup> and C<matcher> perl extensions.	1349	C<selection-popup> and C<matcher> perl extensions.
1296		1350
1297	=item B<transient-for>: I<windowid>	1351	=item B<transient-for>: I<windowid>
…		…
1365	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1419	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1366	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1420	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1367		1421
1368	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1422	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1369	inserted too.	1423	inserted too.
		1424
		1425	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1426	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1427	binding causes the value of the internal selection to be copied to the
		1428	CLIPBOARD selection, while the second binding causes the value of the
		1429	CLIPBOARD selection to be inserted.
1370		1430
1371	=back	1431	=back
1372		1432
1373	=head1 CHANGING FONTS	1433	=head1 CHANGING FONTS
1374		1434
…		…
1463	In addition to the default foreground and background colours,	1523	In addition to the default foreground and background colours,
1464	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus	1524	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1465	high-intensity (potentially bold/blink) versions of the same, and 72 (or	1525	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1466	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB	1526	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1467	cube plus a 8 (24) colour greyscale ramp.	1527	cube plus a 8 (24) colour greyscale ramp.
		1528
		1529	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1530	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1531	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1532	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1533	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1534	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1535	use many similar 24-bit colours. It's typically not a problem in common
		1536	scenarios.
1468		1537
1469	Here is a list of the ANSI colours with their names.	1538	Here is a list of the ANSI colours with their names.
1470		1539
1471	=begin table	1540	=begin table
1472		1541
…		…
1499	The following text gives values for the standard 88 colour mode (and	1568	The following text gives values for the standard 88 colour mode (and
1500	values for the 256 colour mode in parentheses).	1569	values for the 256 colour mode in parentheses).
1501		1570
1502	The RGB cube uses indices 16..79 (16..231) using the following formulas:	1571	The RGB cube uses indices 16..79 (16..231) using the following formulas:
1503		1572
1504	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3	1573	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1505	index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15	1574	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1506		1575
1507	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%	1576	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1508	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of	1577	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1509	the RGB cube.	1578	the RGB cube.
1510		1579
…		…
1526	White.	1595	White.
1527		1596
1528	=head2 ALPHA CHANNEL SUPPORT	1597	=head2 ALPHA CHANNEL SUPPORT
1529		1598
1530	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1599	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1531	their act together, rxvt-unicode will do it's own alpha channel management:	1600	their act together, rxvt-unicode will do its own alpha channel management:
1532		1601
1533	You can prefix any colour with an opaquenes percentage enclosed in	1602	You can prefix any colour with an opaqueness percentage enclosed in
1534	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1603	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1535	(0-100) that specifies the opacity of the colour, where C<0> is completely	1604	(0-100) that specifies the opacity of the colour, where C<0> is completely
1536	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1605	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1537	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1606	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1538	is the recommended format to specify transparency values, and works with	1607	is the recommended format to specify transparency values, and works with
…		…
1618		1687
1619	=item B<SHELL>	1688	=item B<SHELL>
1620		1689
1621	The shell to be used for command execution, defaults to C</bin/sh>.	1690	The shell to be used for command execution, defaults to C</bin/sh>.
1622		1691
1623	=item B<RXVT_SOCKET>	1692	=item B<RXVT_SOCKET> [I<sic>]
1624		1693
1625	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1694	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1626	@@RXVT_NAME@@d(1).	1695	@@RXVT_NAME@@d(1).
1627		1696
1628	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1697	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1698
		1699	=item B<URXVT_PERL_LIB>
		1700
		1701	Additional F<:>-separated library search path for perl extensions. Will be
		1702	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1703	directory.
		1704
		1705	=item B<URXVT_PERL_VERBOSITY>
		1706
		1707	See L<@@RXVT_NAME@@perl>(3).
1629		1708
1630	=item B<HOME>	1709	=item B<HOME>
1631		1710
1632	Used to locate the default directory for the unix domain socket for	1711	Used to locate the default directory for the unix domain socket for
1633	daemon communications and to locate various resource files (such as	1712	daemon communications and to locate various resource files (such as
1634	C<.Xdefaults>)	1713	C<.Xdefaults>)
1635		1714
1636	=item B<XAPPLRESDIR>	1715	=item B<XAPPLRESDIR>
1637		1716
1638	Directory where various X resource files are being located.	1717	Directory where application-specific X resource files are located.
1639		1718
1640	=item B<XENVIRONMENT>	1719	=item B<XENVIRONMENT>
1641		1720
1642	If set and accessible, gives the name of a X resource file to be loaded by	1721	If set and accessible, gives the name of a X resource file to be loaded by
1643	@@RXVT_NAME@@.	1722	@@RXVT_NAME@@.
…		…
1654		1733
1655	=back	1734	=back
1656		1735
1657	=head1 SEE ALSO	1736	=head1 SEE ALSO
1658		1737
		1738	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1659	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1739	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1660		1740
1661	=head1 CURRENT PROJECT COORDINATOR	1741	=head1 CURRENT PROJECT COORDINATOR
1662		1742
1663	=over 4	1743	=over 4
1664		1744
1665	=item Project Coordinator	1745	=item Project Coordinator
1666		1746
1667	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1747	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1668		1748
1669	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1749	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1670		1750
1671	=back	1751	=back
1672		1752
…		…
1676		1756
1677	=item John Bovey	1757	=item John Bovey
1678		1758
1679	University of Kent, 1992, wrote the original Xvt.	1759	University of Kent, 1992, wrote the original Xvt.
1680		1760
1681	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1761	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1682		1762
1683	very heavily modified Xvt and came up with Rxvt	1763	very heavily modified Xvt and came up with Rxvt
1684		1764
1685	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1765	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1686		1766
1687	wrote the Greek Keyboard Input (no longer in code)	1767	wrote the Greek Keyboard Input (no longer in code)
1688		1768
1689	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1769	=item mj olesen <olesen@me.QueensU.CA>
1690		1770
1691	Wrote the menu system.	1771	Wrote the menu system.
1692		1772
1693	Project Coordinator (changes.txt 2.11 to 2.21)	1773	Project Coordinator (changes.txt 2.11 to 2.21)
1694		1774
1695	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1775	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1696		1776
1697	Project Coordinator (changes.txt 2.21a to 2.4.5)	1777	Project Coordinator (changes.txt 2.21a to 2.4.5)
1698		1778
1699	=item Geoff Wing L<< <gcw@pobox.com> >>	1779	=item Geoff Wing <gcw@pobox.com>
1700		1780
1701	Rewrote screen display and text selection routines.	1781	Rewrote screen display and text selection routines.
1702		1782
1703	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1783	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1704		1784
1705	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1785	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1706		1786
1707	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1787	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1708	extension, random hacks, numerous bugfixes and extensions.	1788	extension, random hacks, numerous bugfixes and extensions.
1709		1789
1710	Project Coordinator (Changes 1.0 -)	1790	Project Coordinator (Changes 1.0 -)
1711		1791
1712	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1792	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1713		1793
1714	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1794	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1715		1795
1716	=back	1796	=back
1717		1797

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.179 by root, Sun May 23 01:06:47 2010 UTC vs. Revision 1.252 by sf-exg, Sat Jul 3 15:32:32 2021 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.179 by root, Sun May 23 01:06:47 2010 UTC vs.
Revision 1.252 by sf-exg, Sat Jul 3 15:32:32 2021 UTC