[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.189 by sf-exg, Tue Nov 23 18:52:13 2010 UTC vs.
Revision 1.253 by root, Sat Jul 3 15:34:35 2021 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133		132
134	=item B<-fade> I<number>	133	=item B<-fade> I<number>
135		134
136	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
137	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
140	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
141		140
142	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
143	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
144		143
145	=item B<-tint> I<colour>
146
147	Tint the transparent background with the given colour;
148	resource I<tintColor>.
149
150	=item B<-sh> I<number>
151
152	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153	A value of 100 means no shading; resource I<shading>.
154
155	=item B<-blt> I<string>
156
157	Specify background blending type. If background pixmap is specified
158	at the same time as transparency - such pixmap will be blended over
159	the transparent background, using the method specified. Supported values are:
160	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163	alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165	=item B<-blr> I<HxV>
166
167	Apply Gaussian Blur with the specified radii to the transparent
168	background. If a single number is specified - both vertical and
169	horizontal radii are considered to be the same. Setting one of the
170	radii to 1 and another to a large number creates interesting effects
171	on some backgrounds. Maximum radius value is 128;
172	resource I<blurRadius>.
173
174	=item B<-icon> I<file>	144	=item B<-icon> I<file>
175		145
176	Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
177	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
178	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
179		149
180	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
181		151
182	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
183		153
184	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
185		155
186	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
187
188	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
189
190	Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
191	optionally specify its scaling with a geometry string. Note you may need to
192	add quotes to avoid special shell interpretation of the C<;> in the
193	command-line; for more details see resource B<backgroundPixmap>.
194		157
195	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
196		159
197	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
198		161
…		…
257		220
258	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
259		222
260	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
261		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
262	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
263		230
264	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265	B<utmpInhibit>.	232	B<utmpInhibit>.
266		233
…		…
344		311
345	=item B<-override-redirect>	312	=item B<-override-redirect>
346		313
347	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
348	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
349		321
350	=item B<-sbg>	322	=item B<-sbg>
351		323
352	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
353	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
408	=item B<-pt> I<style>	380	=item B<-pt> I<style>
409		381
410	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
411	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
412		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
413	=item B<-im> I<text>	388	=item B<-im> I<text>
414		389
415	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
416		391
417	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
431	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
432	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
433	in-use. Instead of selecting a full line it will extend the selection to	408	in-use. Instead of selecting a full line it will extend the selection to
434	the end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
435		410
		411	=item B<-dpb>\|B<+dpb>
		412
		413	Compile frills: Disable (or enable) emitting bracketed paste mode
		414	sequences (default enabled). Bracketed paste mode allows programs
		415	to detect when something is pasted. Since more and more programs
		416	abuse this, these sequences can be disabled. The command sequences to
		417	enable and query paste mode will still work, but the actual bracket
		418	sequences will no longer be emitted. You can also toggle this from the
		419	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		420
436	=item B<-insecure>	421	=item B<-insecure>
437		422
438	Enable "insecure" mode, which currently enables most of the escape	423	Enable "insecure" mode, which currently enables most of the escape
439	sequences that echo strings. See the resource B<insecure> for more	424	sequences that echo strings. See the resource B<insecure> for more
440	info.	425	info.
…		…
452		437
453	=item B<-ssr>\|B<+ssr>	438	=item B<-ssr>\|B<+ssr>
454		439
455	Turn on/off secondary screen scroll (default enabled); resource	440	Turn on/off secondary screen scroll (default enabled); resource
456	B<secondaryScroll>.	441	B<secondaryScroll>.
		442
		443	=item B<-rm> I<mode>
		444
		445	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		446	to one of B<auto> (the default), B<always> or B<never>. The latter two
		447	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		448	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		449	B<rewrapMode>.
457		450
458	=item B<-hold>\|B<+hold>	451	=item B<-hold>\|B<+hold>
459		452
460	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	453	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
461	will not immediately destroy its window when the program executed within	454	will not immediately destroy its window when the program executed within
…		…
558	You can set and change the resources using X11 tools like B<xrdb>. Many	551	You can set and change the resources using X11 tools like B<xrdb>. Many
559	distribution do also load settings from the B<~/.Xresources> file when X	552	distribution do also load settings from the B<~/.Xresources> file when X
560	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	553	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
561	with later settings overwriting earlier ones:	554	with later settings overwriting earlier ones:
562		555
563	1. system-wide app-defaults file, either locale-dependent OR global
564	2. app-defaults file in $XAPPLRESDIR	556	1. app-defaults file in $XAPPLRESDIR
		557	2. $HOME/.Xdefaults
565	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	558	3. RESOURCE_MANAGER property on root-window of screen 0
566	4. SCREEN_RESOURCES for the current screen	559	4. SCREEN_RESOURCES property on root-window of the current screen
567	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	560	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
568	6. resources specified via -xrm on the commandline	561	6. resources specified via -xrm on the commandline
569		562
570	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	563	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
571	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	564	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
687		680
688	B<False>: specify that everything is to be displayed, even	681	B<False>: specify that everything is to be displayed, even
689	if the refresh is too fast for the human eye to read anything (or the	682	if the refresh is too fast for the human eye to read anything (or the
690	monitor to display anything); option B<+ss>.	683	monitor to display anything); option B<+ss>.
691		684
692	=item B<transparent:> I<boolean>
693
694	Turn on/off pseudo-transparency by using the root pixmap as background.
695
696	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
697	future versions.
698
699	=item B<fading:> I<number>	685	=item B<fading:> I<number>
700		686
701	Fade the text by the given percentage when focus is lost; option B<-fade>.	687	Fade the text by the given percentage when focus is lost; option B<-fade>.
702		688
703	=item B<fadeColor:> I<colour>	689	=item B<fadeColor:> I<colour>
704		690
705	Fade to this colour, when fading is used (see B<fading:>). The default	691	Fade to this colour, when fading is used (see B<fading:>). The default
706	colour is black; option B<-fadecolor>.	692	colour is black; option B<-fadecolor>.
707		693
708	=item B<tintColor:> I<colour>
709
710	Tint the transparent background with the given colour; option
711	B<-tint>.
712
713	=item B<shading:> I<number>
714
715	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
716	A value of 100 means no shading; option B<-sh>.
717
718	=item B<blendType:> I<string>
719
720	Specify background blending type; option B<-blt>.
721
722	=item B<blurRadius:> I<number>
723
724	Apply gaussian blur with the specified radius to the transparent
725	background; option B<-blr>.
726
727	=item B<iconFile:> I<file>	694	=item B<iconFile:> I<file>
728		695
729	Set the application icon pixmap; option B<-icon>.	696	Set the application icon pixmap; option B<-icon>.
730		697
731	=item B<scrollColor:> I<colour>	698	=item B<scrollColor:> I<colour>
…		…
739		706
740	=item B<borderColor:> I<colour>	707	=item B<borderColor:> I<colour>
741		708
742	The colour of the border around the text area and between the scrollbar	709	The colour of the border around the text area and between the scrollbar
743	and the text.	710	and the text.
744
745	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
746
747	Use the specified image file for the background and also
748	optionally specify its scaling with a geometry string B<WxH+X+Y>,
749	(default C<100x100+50+50>) in which B<"W" / "H"> specify the
750	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
751	centre (percent). A scale of 0 displays the image with tiling.
752	The maximum permitted scale is 1000.
753	Additional operations can be specified after colon B<:op1:op2...>.
754	Supported operations are:
755
756	tile force background image to be tiled and not scaled. Equivalent to 0x0
757	propscale will scale image keeping proportions
758	auto will scale image to match window size. Equivalent to 100x100
759	hscale will scale image horizontally to the window size
760	vscale will scale image vertically to the window size
761	scale will scale image to match window size
762	root will tile image as if it was a root window background, auto-adjusting
763	whenever terminal window moves
764
765	If used in conjunction with B<-tr> option, the specified pixmap will be
766	blended over the transparent background using alpha-blending. If I<afterimage>
767	support has been compiled in it is possible to choose other blending
768	types with B<-blt "type"> option.
769
770	=item B<path:> I<path>
771
772	Specify the colon-delimited search path for finding background image files.
773		711
774	=item B<font:> I<fontlist>	712	=item B<font:> I<fontlist>
775		713
776	Select the fonts to be used. This is a comma separated list of font names	714	Select the fonts to be used. This is a comma separated list of font names
777	that are checked in order when trying to find glyphs for characters. The	715	that are checked in order when trying to find glyphs for characters. The
…		…
874		812
875	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	813	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
876	the shell; option B<-ls>. B<False>: start as a normal sub-shell	814	the shell; option B<-ls>. B<False>: start as a normal sub-shell
877	[default]; option B<+ls>.	815	[default]; option B<+ls>.
878		816
		817	=item B<multiClickTime:> I<number>
		818
		819	Specify the maximum time in milliseconds between multi-click select
		820	events. The default is 500 milliseconds; option B<-mc>.
		821
879	=item B<utmpInhibit:> I<boolean>	822	=item B<utmpInhibit:> I<boolean>
880		823
881	B<True>: inhibit writing record into the system log file B<utmp>;	824	B<True>: inhibit writing record into the system log file B<utmp>;
882	option B<-ut>. B<False>: write record into the system log file B<utmp>	825	option B<-ut>. B<False>: write record into the system log file B<utmp>
883	[default]; option B<+ut>.	826	[default]; option B<+ut>.
…		…
900	=item B<scrollstyle:> I<mode>	843	=item B<scrollstyle:> I<mode>
901		844
902	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	845	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
903	the author's favourite.	846	the author's favourite.
904		847
		848	=item B<thickness:> I<number>
		849
		850	Set the scrollbar width in pixels.
		851
905	=item B<scrollBar:> I<boolean>	852	=item B<scrollBar:> I<boolean>
906		853
907	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	854	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
908	disable the scrollbar; option B<+sb>.	855	disable the scrollbar; option B<+sb>.
909		856
…		…
928	B<False>: do not scroll to bottom when tty receives output; option	875	B<False>: do not scroll to bottom when tty receives output; option
929	B<+si>.	876	B<+si>.
930		877
931	=item B<scrollWithBuffer:> I<boolean>	878	=item B<scrollWithBuffer:> I<boolean>
932		879
933	B<True>: scroll with scrollback buffer when tty receives new lines (and	880	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
934	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	881	try to show the same lines) and B<scrollTtyOutput> is False; option
935	with scrollback buffer when tty receives new lines; option B<+sw>.	882	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		883	new lines; option B<+sw>.
936		884
937	=item B<scrollTtyKeypress:> I<boolean>	885	=item B<scrollTtyKeypress:> I<boolean>
938		886
939	B<True>: scroll to bottom when a non-special key is pressed. Special keys	887	B<True>: scroll to bottom when a non-special key is pressed. Special keys
940	are those which are intercepted by rxvt-unicode for special handling and	888	are those which are intercepted by rxvt-unicode for special handling and
941	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	889	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
942	bottom when a non-special key is pressed; option B<+sk>.	890	bottom when a non-special key is pressed; option B<+sk>.
943		891
944	=item B<saveLines:> I<number>	892	=item B<saveLines:> I<number>
945		893
946	Save I<number> lines in the scrollback buffer [default 64]. This	894	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
947	resource is limited on most machines to 65535; option B<-sl>.
948		895
949	=item B<internalBorder:> I<number>	896	=item B<internalBorder:> I<number>
950		897
951	Internal border of I<number> pixels. This resource is limited to 100;	898	Internal border of I<number> pixels. This resource is limited to 100;
952	option B<-b>.	899	option B<-b>.
…		…
1015		962
1016	=item B<pointerColor2:> I<colour>	963	=item B<pointerColor2:> I<colour>
1017		964
1018	Mouse pointer background colour.	965	Mouse pointer background colour.
1019		966
		967	=item B<pointerShape:> I<string>
		968
		969	Compile I<frills>: Specifies the name of the mouse pointer shape
		970	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		971	file for possible values (omit the C<XC_> prefix).
		972
1020	=item B<pointerBlankDelay:> I<number>	973	=item B<pointerBlankDelay:> I<number>
1021		974
1022	Specifies number of seconds before blanking the pointer [default 2]. Use a	975	Specifies number of seconds before blanking the pointer [default 2]. Use a
1023	large number (e.g. C<987654321>) to effectively disable the timeout.	976	large number (e.g. C<987654321>) to effectively disable the timeout.
1024		977
…		…
1050		1003
1051	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1004	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1052		1005
1053	=item B<preeditType:> I<style>	1006	=item B<preeditType:> I<style>
1054		1007
1055	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1008	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1056		1009
1057	=item B<inputMethod:> I<name>	1010	=item B<inputMethod:> I<name>
1058		1011
1059	I<name> of inputMethod to use; option B<-im>.	1012	I<name> of inputMethod to use; option B<-im>.
1060		1013
…		…
1078		1031
1079	Change the meaning of triple-click selection with the left mouse	1032	Change the meaning of triple-click selection with the left mouse
1080	button. Instead of selecting a full line it will extend the selection to	1033	button. Instead of selecting a full line it will extend the selection to
1081	the end of the logical line only; option B<-tcw>.	1034	the end of the logical line only; option B<-tcw>.
1082		1035
		1036	=item B<disablePasteBrackets:> I<boolean>
		1037
		1038	Prevent emission of paste bracket sequences; option B<-dpb>.
		1039
1083	=item B<insecure:> I<boolean>	1040	=item B<insecure:> I<boolean>
1084		1041
1085	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1042	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1086	echo arbitrary strings like the icon name or the locale. This could be	1043	echo arbitrary strings like the icon name or the locale. This could be
1087	abused if somebody gets 8-bit-clean access to your display, whether	1044	abused if somebody gets 8-bit-clean access to your display, whether
1088	through a mail client displaying mail bodies unfiltered or through	1045	through a mail client displaying mail bodies unfiltered or through
1089	write(1) or any other means. Therefore, these sequences are disabled by	1046	write(1) or any other means. Therefore, these sequences are disabled by
1090	default. (Note that many other terminals, including xterm, have these	1047	default. (Note that many other terminals, including xterm, have these
…		…
1108		1065
1109	=item B<secondaryScreen:> I<boolean>	1066	=item B<secondaryScreen:> I<boolean>
1110		1067
1111	Turn on/off secondary screen (default enabled).	1068	Turn on/off secondary screen (default enabled).
1112		1069
		1070	=item B<rewrapMode:> I<mode>
		1071
		1072	Sets long line rewrap behaviour on window resize to one of B<auto>
		1073	(default), B<always> or B<never>.
		1074
1113	=item B<secondaryScroll:> I<boolean>	1075	=item B<secondaryScroll:> I<boolean>
1114		1076
1115	Turn on/off secondary screen scroll (default enabled). If this	1077	Turn on/off secondary screen scroll (default enabled). If this
1116	option is enabled, scrolls on the secondary screen will change the	1078	option is enabled, scrolls on the secondary screen will change the
1117	scrollback buffer and, when secondaryScreen is off, switching	1079	scrollback buffer and, when secondaryScreen is off, switching
…		…
1129	Sets the working directory for the shell (or the command specified via	1091	Sets the working directory for the shell (or the command specified via
1130	B<-e>). The I<path> must be an absolute path and it must exist for	1092	B<-e>). The I<path> must be an absolute path and it must exist for
1131	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1093	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1132	directory will be used; option B<-cd>.	1094	directory will be used; option B<-cd>.
1133		1095
1134	=item B<keysym.>I<sym>: I<string>	1096	=item B<keysym.>I<sym>: I<action>
1135		1097
1136	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1098	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1137	intervening resource name B<keysym.> cannot be omitted.	1099	resource name B<keysym.> cannot be omitted.
1138		1100
1139	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1101	Using this resource, you can map key combinations such as
1140	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1102	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1141	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1103	string than would normally result from that combination, making the
1142	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1104	terminal scroll up or down the way you want it, or any other thing an
1143	B<2>, B<3>, B<4>, B<5>.	1105	extension might provide.
		1106
		1107	The key combination that triggers the action, I<sym>, has the following format:
		1108
		1109	(modifiers-)key
		1110
		1111	Where I<modifiers> can be any combination of the following full or
		1112	abbreviated modifier names:
		1113
		1114	=begin table
		1115
		1116	B<ISOLevel3> B<I>
		1117	B<AppKeypad> B<K>
		1118	B<Control> B<C>
		1119	B<NumLock> B<N>
		1120	B<Shift> B<S>
		1121	B<Meta> B<M> I<or> B<A>
		1122	B<Lock> B<L>
		1123	B<Mod1> B<1>
		1124	B<Mod2> B<2>
		1125	B<Mod3> B<3>
		1126	B<Mod4> B<4>
		1127	B<Mod5> B<5>
		1128
		1129	=end table
1144		1130
1145	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1131	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1146	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1132	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1147	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1133	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1148	current application keymap mode state.	1134	current application keymap mode state.
1149		1135
1150	The spellings of I<key> can be obtained by using B<xev>(1) command or	1136	Due the the large number of modifier combinations, a key mapping will
1151	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1137	match if I<at least> the specified identifiers are being set, and no other
		1138	key mappings with those and more bits are being defined. That means that
		1139	defining a mapping for C<a> will automatically provide definitions for
		1140	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1141	themselves. See the C<builtin:> action, below, for a way to work around
		1142	this when this is a problem.
		1143
		1144	The spelling of I<key> depends on your implementation of X. An easy way to
		1145	find a key name is to use the B<xev>(1) command. You can find a list by
		1146	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1152	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1147	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1153	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1148	value (B<0x0000 - 0xFFFF>).
1154	performed in an exact manner; however, the closest match is assured.
1155		1149
1156	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1150	As with any resource value, the I<action> string may contain backslash
		1151	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1157	number), see RESOURCES in C<man 7 X> for further details.	1152	number), see RESOURCES in C<man 7 X> for further details.
1158		1153
1159	You can define a range of keysyms in one shot by providing a I<string>	1154	An action starts with an action prefix that selects a certain type
1160	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1155	of action, followed by a colon. An action string without colons is
		1156	interpreted as a literal string to pass to the tty (as if it was
		1157	prefixed with C<string:>).
		1158
		1159	The following action prefixes are known - extensions can provide
		1160	additional prefixes:
		1161
		1162	=over 4
		1163
		1164	=item string:STRING
		1165
		1166	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1167	then the remaining C<STRING> will be passed to the program running in the
		1168	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1169	string C<echo rm -rf /> followed by a newline:
		1170
		1171	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1172
		1173	This could in theory be used to completely redefine your keymap.
		1174
		1175	In addition, for actions of this type, you can define a range of
		1176	keysyms in one shot by loading the C<keysym-list> perl extension and
		1177	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1161	should be a character not used by the strings.	1178	the delimiter `/' should be a character not used by the strings.
1162		1179
1163	Its usage can be demonstrated by an example:	1180	Its usage can be demonstrated by an example:
1164		1181
1165	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1182	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1166		1183
1167	The above line is equivalent to the following three lines:	1184	The above line is equivalent to the following three lines:
1168		1185
1169	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1186	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1170	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1187	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1171	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1188	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1172		1189
		1190	=item command:STRING
		1191
1173	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1192	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1174	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1193	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1194	the opposite of C<string:> - instead of sending it to the program running
		1195	in the terminal, it will be treated as if it were program output). This is
		1196	most useful to feed command sequences into @@RXVT_NAME@@.
		1197
1175	example the following means "change the current locale to C<zh_CN.GBK>	1198	For example the following means "change the current locale to C<zh_CN.GBK>
1176	when Control-Meta-c is being pressed":	1199	when Control-Meta-c is being pressed":
1177		1200
1178	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1201	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1179		1202
1180	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1203	The following example will map Control-Meta-1 and Control-Meta-2 to
1181	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1204	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1182	manpage. For example, the F<selection> extension (activated via	1205	font-switching at runtime:
1183	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1184		1206
1185	URxvt.keysym.M-C-c: perl:selection:rot13	1207	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1208	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1186		1209
1187	Due the the large number of modifier combinations, a defined key mapping	1210	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1188	will match if I<at least> the specified identifiers are being set, and	1211	info):
1189	no other key mappings with those and more bits are being defined. That
1190	means that defining a key map for C<a> will automatically provide
1191	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1192	mappings themselves.
1193		1212
1194	Unfortunately, this will override built-in key mappings. For example	1213	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1214	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1215
		1216	=item builtin:
		1217
		1218	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1219	key binding existed for the key combination. The obvious use is to undo
		1220	the effect of existing bindings. The not so obvious use is to reinstate
		1221	bindings when another binding overrides too many modifiers.
		1222
1195	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1223	For example if you overwrite the C<Insert> key you will disable
1196	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1224	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1197	user-defined keymap using the C<builtin:> replacement:	1225	"holes" into the user-defined keymap using the C<builtin:> replacement:
1198		1226
1199	URxvt.keysym.Insert: <my insert key sequence>	1227	URxvt.keysym.Insert: <my insert key sequence>
1200	URxvt.keysym.S-Insert: builtin:	1228	URxvt.keysym.S-Insert: builtin:
1201		1229
1202	The first line defines a mapping for C<Insert> and I<any> combination	1230	The first line defines a mapping for C<Insert> and I<any> combination
1203	of modifiers. The second line re-establishes the default mapping for	1231	of modifiers. The second line re-establishes the default mapping for
1204	C<Shift-Insert>.	1232	C<Shift-Insert>.
1205		1233
1206	The following example will map Control-Meta-1 and Control-Meta-2 to	1234	=item builtin-string:
1207	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1208	font-switching at runtime:
1209		1235
1210	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1236	This action is mainly useful to restore string mappings for keys that
1211	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1237	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1238	difficult to explain - basically, this action will send the string to the
		1239	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1240	action for it.
1212		1241
1213	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1242	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1214	info):	1243	selection when you press C<Shift-Insert>. With the following bindings, it
		1244	would instead emit the (undocumented, but what applications running in the
		1245	terminal might expect) sequence C<ESC [ 2 $> instead:
1215		1246
1216	URxvt.keysym.M-C-3: command:\033[8;25;80t	1247	URxvt.keysym.S-Insert: builtin-string:
1217	URxvt.keysym.M-C-4: command:\033[8;48;110t	1248	URxvt.keysym.C-S-Insert: builtin:
		1249
		1250	The first line disables the paste functionality for that key
		1251	combination, and the second reinstates the default behaviour for
		1252	C<Control-Shift-Insert>, which would otherwise be overridden.
		1253
		1254	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1255	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1256	this:
		1257
		1258	URxvt.keysym.C-M-c: builtin-string:
		1259	URxvt.keysym.C-M-v: builtin-string:
		1260
		1261	=item EXTENSION:STRING
		1262
		1263	An action of this form invokes the action B<STRING>, if any, provided
		1264	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1265	be loaded automatically if necessary.
		1266
		1267	Not all extensions define actions, but popular extensions that do
		1268	include the I<selection> and I<matcher> extensions (documented in their
		1269	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1270	respectively).
		1271
		1272	From the silly examples department, this will rot13-"encrypt"
		1273	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1274	keyboards:
		1275
		1276	URxvt.keysym.M-C-c: selection:rot13
		1277
		1278	=item perl:STRING DEPRECATED
		1279
		1280	This is a deprecated way of invoking commands provided by perl
		1281	extensions. It is still supported, but should not be used anymore.
		1282
		1283	=back
1218		1284
1219	=item B<perl-ext-common>: I<string>	1285	=item B<perl-ext-common>: I<string>
1220		1286
1221	=item B<perl-ext>: I<string>	1287	=item B<perl-ext>: I<string>
1222		1288
…		…
1224	use in this terminal instance; option B<-pe>.	1290	use in this terminal instance; option B<-pe>.
1225		1291
1226	Extension names can be prefixed with a C<-> sign to prohibit using	1292	Extension names can be prefixed with a C<-> sign to prohibit using
1227	them. This can be useful to selectively disable some extensions loaded	1293	them. This can be useful to selectively disable some extensions loaded
1228	by default, or specified via the C<perl-ext-common> resource. For	1294	by default, or specified via the C<perl-ext-common> resource. For
1229	example, C<default,-selection> will use all the default extension except	1295	example, C<default,-selection> will use all the default extensions except
1230	C<selection>.	1296	C<selection>.
1231		1297
1232	Extension names can also be followed by an argument in angle brackets	1298	The default set includes the C<selection>, C<option-popup>,
1233	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1299	C<selection-popup>, C<readline> and C<searchable-scrollback>
1234	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1300	extensions, and extensions which are mentioned in B<keysym> resources.
1235	multiple times with different arguments will pass multiple arguments to	1301
1236	the extension.	1302	Any extension such that a corresponding resource is given on the
		1303	command line is automatically appended to B<perl-ext>.
1237		1304
1238	Each extension is looked up in the library directories, loaded if	1305	Each extension is looked up in the library directories, loaded if
1239	necessary, and bound to the current terminal instance.	1306	necessary, and bound to the current terminal instance. When the library
		1307	search path contains multiple extension files of the same name, then the
		1308	first one found will be used.
1240		1309
1241	If both of these resources are the empty string, then the perl	1310	If both of these resources are the empty string, then the perl interpreter
1242	interpreter will not be initialized. The idea behind two options is that	1311	will not be initialized. The rationale for having two options is that
1243	B<perl-ext-common> will be used for extensions that should be available to	1312	B<perl-ext-common> will be used for extensions that should be available to
1244	all instances, while B<perl-ext> is used for specific instances.	1313	all instances, while B<perl-ext> is used for specific instances.
1245		1314
1246	=item B<perl-eval>: I<string>	1315	=item B<perl-eval>: I<string>
1247		1316
…		…
1249	the @@RXVT_NAME@@perl(3) manpage.	1318	the @@RXVT_NAME@@perl(3) manpage.
1250		1319
1251	=item B<perl-lib>: I<path>	1320	=item B<perl-lib>: I<path>
1252		1321
1253	Colon-separated list of additional directories that hold extension	1322	Colon-separated list of additional directories that hold extension
1254	scripts. When looking for extensions specified by the C<perl> resource,	1323	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1255	@@RXVT_NAME@@ will first look in these directories and then in	1324	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1256	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1325	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1257		1326
1258	See the @@RXVT_NAME@@perl(3) manpage.	1327	See the @@RXVT_NAME@@perl(3) manpage.
1259		1328
1260	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1329	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1261		1330
…		…
1265	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1334	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1266		1335
1267	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1336	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1268	for details.	1337	for details.
1269		1338
1270	=item B<searchable-scrollback:> I<keysym>	1339	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1271		1340
1272	Sets the hotkey that starts the incremental scrollback buffer search	1341	This resource is deprecated and will be removed. Use a B<keysym> resource
1273	(default: C<M-s>).	1342	instead, e.g.:
1274		1343
		1344	URxvt.keysym.M-s: searchable-scrollback:start
		1345
1275	=item B<urlLauncher>: I<string>	1346	=item B<url-launcher>: I<string>
1276		1347
1277	Specifies the program to be started with a URL argument. Used by the	1348	Specifies the program to be started with a URL argument. Used by the
1278	C<selection-popup> and C<matcher> perl extensions.	1349	C<selection-popup> and C<matcher> perl extensions.
1279		1350
1280	=item B<transient-for>: I<windowid>	1351	=item B<transient-for>: I<windowid>
…		…
1348	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1419	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1349	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1420	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1350		1421
1351	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1422	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1352	inserted too.	1423	inserted too.
		1424
		1425	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1426	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1427	binding causes the value of the internal selection to be copied to the
		1428	CLIPBOARD selection, while the second binding causes the value of the
		1429	CLIPBOARD selection to be inserted.
1353		1430
1354	=back	1431	=back
1355		1432
1356	=head1 CHANGING FONTS	1433	=head1 CHANGING FONTS
1357		1434
…		…
1446	In addition to the default foreground and background colours,	1523	In addition to the default foreground and background colours,
1447	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus	1524	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1448	high-intensity (potentially bold/blink) versions of the same, and 72 (or	1525	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1449	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB	1526	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1450	cube plus a 8 (24) colour greyscale ramp.	1527	cube plus a 8 (24) colour greyscale ramp.
		1528
		1529	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1530	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1531	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1532	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1533	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1534	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1535	use many similar 24-bit colours. It's typically not a problem in common
		1536	scenarios.
1451		1537
1452	Here is a list of the ANSI colours with their names.	1538	Here is a list of the ANSI colours with their names.
1453		1539
1454	=begin table	1540	=begin table
1455		1541
…		…
1482	The following text gives values for the standard 88 colour mode (and	1568	The following text gives values for the standard 88 colour mode (and
1483	values for the 256 colour mode in parentheses).	1569	values for the 256 colour mode in parentheses).
1484		1570
1485	The RGB cube uses indices 16..79 (16..231) using the following formulas:	1571	The RGB cube uses indices 16..79 (16..231) using the following formulas:
1486		1572
1487	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3	1573	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1488	index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15	1574	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1489		1575
1490	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%	1576	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1491	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of	1577	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1492	the RGB cube.	1578	the RGB cube.
1493		1579
…		…
1509	White.	1595	White.
1510		1596
1511	=head2 ALPHA CHANNEL SUPPORT	1597	=head2 ALPHA CHANNEL SUPPORT
1512		1598
1513	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1599	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1514	their act together, rxvt-unicode will do it's own alpha channel management:	1600	their act together, rxvt-unicode will do its own alpha channel management:
1515		1601
1516	You can prefix any colour with an opaqueness percentage enclosed in	1602	You can prefix any colour with an opaqueness percentage enclosed in
1517	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1603	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1518	(0-100) that specifies the opacity of the colour, where C<0> is completely	1604	(0-100) that specifies the opacity of the colour, where C<0> is completely
1519	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1605	transparent and C<100> is completely opaque. For example, C<[50]red> is a
…		…
1601		1687
1602	=item B<SHELL>	1688	=item B<SHELL>
1603		1689
1604	The shell to be used for command execution, defaults to C</bin/sh>.	1690	The shell to be used for command execution, defaults to C</bin/sh>.
1605		1691
1606	=item B<RXVT_SOCKET>	1692	=item B<RXVT_SOCKET> [I<sic>]
1607		1693
1608	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1694	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1609	@@RXVT_NAME@@d(1).	1695	@@RXVT_NAME@@d(1).
1610		1696
1611	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1697	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1698
		1699	=item B<URXVT_PERL_LIB>
		1700
		1701	Additional F<:>-separated library search path for perl extensions. Will be
		1702	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1703	directory.
		1704
		1705	=item B<URXVT_PERL_VERBOSITY>
		1706
		1707	See L<@@RXVT_NAME@@perl>(3).
1612		1708
1613	=item B<HOME>	1709	=item B<HOME>
1614		1710
1615	Used to locate the default directory for the unix domain socket for	1711	Used to locate the default directory for the unix domain socket for
1616	daemon communications and to locate various resource files (such as	1712	daemon communications and to locate various resource files (such as
1617	C<.Xdefaults>)	1713	C<.Xdefaults>)
1618		1714
1619	=item B<XAPPLRESDIR>	1715	=item B<XAPPLRESDIR>
1620		1716
1621	Directory where various X resource files are being located.	1717	Directory where application-specific X resource files are located.
1622		1718
1623	=item B<XENVIRONMENT>	1719	=item B<XENVIRONMENT>
1624		1720
1625	If set and accessible, gives the name of a X resource file to be loaded by	1721	If set and accessible, gives the name of a X resource file to be loaded by
1626	@@RXVT_NAME@@.	1722	@@RXVT_NAME@@.
…		…
1637		1733
1638	=back	1734	=back
1639		1735
1640	=head1 SEE ALSO	1736	=head1 SEE ALSO
1641		1737
		1738	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1642	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1739	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1643		1740
1644	=head1 CURRENT PROJECT COORDINATOR	1741	=head1 CURRENT PROJECT COORDINATOR
1645		1742
1646	=over 4	1743	=over 4
1647		1744
1648	=item Project Coordinator	1745	=item Project Coordinator
1649		1746
1650	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1747	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1651		1748
1652	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1749	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1653		1750
1654	=back	1751	=back
1655		1752
…		…
1659		1756
1660	=item John Bovey	1757	=item John Bovey
1661		1758
1662	University of Kent, 1992, wrote the original Xvt.	1759	University of Kent, 1992, wrote the original Xvt.
1663		1760
1664	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1761	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1665		1762
1666	very heavily modified Xvt and came up with Rxvt	1763	very heavily modified Xvt and came up with Rxvt
1667		1764
1668	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1765	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1669		1766
1670	wrote the Greek Keyboard Input (no longer in code)	1767	wrote the Greek Keyboard Input (no longer in code)
1671		1768
1672	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1769	=item mj olesen <olesen@me.QueensU.CA>
1673		1770
1674	Wrote the menu system.	1771	Wrote the menu system.
1675		1772
1676	Project Coordinator (changes.txt 2.11 to 2.21)	1773	Project Coordinator (changes.txt 2.11 to 2.21)
1677		1774
1678	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1775	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1679		1776
1680	Project Coordinator (changes.txt 2.21a to 2.4.5)	1777	Project Coordinator (changes.txt 2.21a to 2.4.5)
1681		1778
1682	=item Geoff Wing L<< <gcw@pobox.com> >>	1779	=item Geoff Wing <gcw@pobox.com>
1683		1780
1684	Rewrote screen display and text selection routines.	1781	Rewrote screen display and text selection routines.
1685		1782
1686	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1783	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1687		1784
1688	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1785	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1689		1786
1690	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1787	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1691	extension, random hacks, numerous bugfixes and extensions.	1788	extension, random hacks, numerous bugfixes and extensions.
1692		1789
1693	Project Coordinator (Changes 1.0 -)	1790	Project Coordinator (Changes 1.0 -)
1694		1791
1695	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1792	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1696		1793
1697	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1794	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1698		1795
1699	=back	1796	=back
1700		1797

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.189 by sf-exg, Tue Nov 23 18:52:13 2010 UTC vs. Revision 1.253 by root, Sat Jul 3 15:34:35 2021 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.189 by sf-exg, Tue Nov 23 18:52:13 2010 UTC vs.
Revision 1.253 by root, Sat Jul 3 15:34:35 2021 UTC