[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.151 by root, Wed Dec 12 19:55:55 2007 UTC vs.
Revision 1.255 by root, Sat Jul 24 11:00:58 2021 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
17	=head1 FREQUENTLY ASKED QUESTIONS	20	=head1 FREQUENTLY ASKED QUESTIONS
18		21
19	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of	22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
20	frequently asked questions and answer to them and some common	23	frequently asked questions and answer to them and some common
21	problems. That document is also accessible on the World-Wide-Web at	24	problems. That document is also accessible on the World-Wide-Web at
22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.	25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
23		26
24	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
25		28
26	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
27	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
…		…
81	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
82	Orange'.	85	Orange'.
83		86
84	The following options are available:	87	The following options are available:
85		88
86	=over 4	89	=over
87		90
88	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
89		92
90	Print out a message describing available options.	93	Print out a message describing available options.
91		94
92	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
93		96
94	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
95	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
96	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
97		100
98	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
99		102
100	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
101	resource B<depth>.	104	resource B<depth>.
102		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
103	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
104		118
105	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
106		120
107	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
113	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
114		128
115	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
116		130
117	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
118
119	=item B<-tr>\|B<+tr>
120
121	Turn on/off illusion of a transparent window background; resource B<transparent>.
122
123	B<-ip> is still accepted as an obsolete alias but will be removed in
124	future versions.
125
126	I<Please address all transparency related issues to Sasha Vasko at
127	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
128		132
129	=item B<-fade> I<number>	133	=item B<-fade> I<number>
130		134
131	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
132	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
135	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
136		140
137	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
138	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
139		143
140	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
141		145
142	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
143	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
144	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
145	used to brighten or darken the image in addition to tinting it.
146	Please note that certain tint colours can be applied on the server-side,
147	thus yielding performance gain of two orders of magnitude. These colours are:
148	blue, red, green, cyan, magenta, yellow, and those close to them. Also
149	pure black and pure white colors essentially mean no tinting; resource
150	I<tintColor>. Example:
151
152	@@RXVT_NAME@@ -tr -tint blue -sh 40
153
154	=item B<-sh> I<number>
155
156	Darken (0 .. 100) or lighten (100 .. 200) the transparent
157	background image in addition to (or instead of) tinting it;
158	resource I<shading>.
159
160	=item B<-blt> I<string>
161
162	Specify background blending type. If background pixmap is specified
163	at the same time as transparency - such pixmap will be blended over
164	transparency image, using method specified. Supported values are :
165	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
166	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
167	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
168	alpha-blending. Compile I<afterimage>; resource I<blendType>.
169
170	=item B<-blr> I<HxV>
171
172	Apply Gaussian Blur with the specified radii to the transparent
173	background image. If single number is specified - both vertical and
174	horizontal radii are considered to be the same. Setting one of the
175	radii to 1 and another to a large number creates interesting effects
176	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
177	resource I<blurRadius>.
178		149
179	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
180		151
181	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
182		153
183	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
184		155
185	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
186
187	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
188
189	Compile I<afterimage>: Specify image file for the background and also
190	optionally specify its scaling with a geometry string. Note you may need to
191	add quotes to avoid special shell interpretation of the C<;> in the
192	command-line; for more details see resource B<backgroundPixmap>.
193		157
194	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
195		159
196	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
197		161
…		…
242	italic> >> characters are to be printed. See resource B<boldItalicFont>	206	italic> >> characters are to be printed. See resource B<boldItalicFont>
243	for details.	207	for details.
244		208
245	=item B<-is>\|B<+is>	209	=item B<-is>\|B<+is>
246		210
247	Compile I<font-styles>: Bold/Italic font styles imply high intensity	211	Compile I<font-styles>: Bold/Blink font styles imply high intensity
248	foreground/background (default). See resource B<intensityStyles> for	212	foreground/background (default). See resource B<intensityStyles> for
249	details.	213	details.
250		214
251	=item B<-name> I<name>	215	=item B<-name> I<name>
252		216
…		…
256		220
257	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
258		222
259	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
260		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
261	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
262		230
263	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
264	B<utmpInhibit>.	232	B<utmpInhibit>.
265		233
…		…
269	B<visualBell>.	237	B<visualBell>.
270		238
271	=item B<-sb>\|B<+sb>	239	=item B<-sb>\|B<+sb>
272		240
273	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>\|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>\|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
274		251
275	=item B<-si>\|B<+si>	252	=item B<-si>\|B<+si>
276		253
277	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
278	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
285	=item B<-sw>\|B<+sw>	262	=item B<-sw>\|B<+sw>
286		263
287	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
288	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
289	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
290
291	=item B<-sr>\|B<+sr>
292
293	Put scrollbar on right/left; resource B<scrollBar_right>.
294
295	=item B<-st>\|B<+st>
296
297	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
298	resource B<scrollBar_floating>.
299		267
300	=item B<-ptab>\|B<+ptab>	268	=item B<-ptab>\|B<+ptab>
301		269
302	If enabled (default), "Horizontal Tab" characters are being stored as	270	If enabled (default), "Horizontal Tab" characters are being stored as
303	actual wide characters in the screen buffer, which makes it possible to	271	actual wide characters in the screen buffer, which makes it possible to
…		…
307		275
308	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
309		277
310	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
311		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
312	=item B<-iconic>	284	=item B<-iconic>
313		285
314	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
315	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
316		288
…		…
332		304
333	=item B<-bl>	305	=item B<-bl>
334		306
335	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
336	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
337	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
338		311
339	=item B<-override-redirect>	312	=item B<-override-redirect>
340		313
341	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
342	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
343		321
344	=item B<-sbg>	322	=item B<-sbg>
345		323
346	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
347	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
351	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
352		330
353	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
354	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
355	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
356		341
357	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
358		343
359	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
360	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
395	=item B<-pt> I<style>	380	=item B<-pt> I<style>
396		381
397	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
398	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
399		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
400	=item B<-im> I<text>	388	=item B<-im> I<text>
401		389
402	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
403		391
404	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
418	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
419	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
420	in-use. Instead of selecting a full line it will extend the selection to	408	in-use. Instead of selecting a full line it will extend the selection to
421	the end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
422		410
		411	=item B<-dpb>\|B<+dpb>
		412
		413	Compile frills: Disable (or enable) emitting bracketed paste mode
		414	sequences (default enabled). Bracketed paste mode allows programs
		415	to detect when something is pasted. Since more and more programs
		416	abuse this, these sequences can be disabled. The command sequences to
		417	enable and query paste mode will still work, but the actual bracket
		418	sequences will no longer be emitted. You can also toggle this from the
		419	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		420
423	=item B<-insecure>	421	=item B<-insecure>
424		422
425	Enable "insecure" mode, which currently enables most of the escape	423	Enable "insecure" mode, which currently enables most of the escape
426	sequences that echo strings. See the resource B<insecure> for more	424	sequences that echo strings. See the resource B<insecure> for more
427	info.	425	info.
…		…
439		437
440	=item B<-ssr>\|B<+ssr>	438	=item B<-ssr>\|B<+ssr>
441		439
442	Turn on/off secondary screen scroll (default enabled); resource	440	Turn on/off secondary screen scroll (default enabled); resource
443	B<secondaryScroll>.	441	B<secondaryScroll>.
		442
		443	=item B<-rm> I<mode>
		444
		445	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		446	to one of B<auto> (the default), B<always> or B<never>. The latter two
		447	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		448	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		449	B<rewrapMode>.
444		450
445	=item B<-hold>\|B<+hold>	451	=item B<-hold>\|B<+hold>
446		452
447	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	453	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
448	will not immediately destroy its window when the program executed within	454	will not immediately destroy its window when the program executed within
449	it exits. Instead, it will wait till it is being killed or closed by the	455	it exits. Instead, it will wait till it is being killed or closed by the
450	user; resource B<hold>.	456	user; resource B<hold>.
		457
		458	=item B<-cd> I<path>
		459
		460	Sets the working directory for the shell (or the command specified via
		461	B<-e>). The I<path> must be an absolute path and it must exist for
		462	@@RXVT_NAME@@ to start; resource B<chdir>.
451		463
452	=item B<-xrm> I<string>	464	=item B<-xrm> I<string>
453		465
454	Works like the X Toolkit option of the same name, by adding the I<string>	466	Works like the X Toolkit option of the same name, by adding the I<string>
455	as if it were specified in a resource file. Resource values specified this	467	as if it were specified in a resource file. Resource values specified this
…		…
539	You can set and change the resources using X11 tools like B<xrdb>. Many	551	You can set and change the resources using X11 tools like B<xrdb>. Many
540	distribution do also load settings from the B<~/.Xresources> file when X	552	distribution do also load settings from the B<~/.Xresources> file when X
541	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	553	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
542	with later settings overwriting earlier ones:	554	with later settings overwriting earlier ones:
543		555
544	1. system-wide app-defaults file, either locale-dependent OR global
545	2. app-defaults file in $XAPPLRESDIR	556	1. app-defaults file in $XAPPLRESDIR
		557	2. $HOME/.Xdefaults
546	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	558	3. RESOURCE_MANAGER property on root-window of screen 0
547	4. SCREEN_RESOURCES for the current screen	559	4. SCREEN_RESOURCES property on root-window of the current screen
548	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	560	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
549	6. resources specified via -xrm on the commandline	561	6. resources specified via -xrm on the commandline
550		562
551	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	563	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
552	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	564	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
557	be used. Command-line arguments can be used to override resource	569	be used. Command-line arguments can be used to override resource
558	settings. The following resources are supported (you might want to	570	settings. The following resources are supported (you might want to
559	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	571	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
560	extensions not documented here):	572	extensions not documented here):
561		573
562	=over 4	574	=over
563		575
564	=item B<depth:> I<bitdepth>	576	=item B<depth:> I<bitdepth>
565		577
566	Compile I<xft>: Attempt to find a visual with the given bit depth;	578	Compile I<xft>: Attempt to find a visual with the given bit depth;
567	option B<-depth>.	579	option B<-depth>.
		580
		581	=item B<buffered:> I<boolean>
		582
		583	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		584	On some card/driver combination enabling it slightly decreases
		585	performance, on most it greatly helps it. The slowdown is small, so it
		586	should normally be enabled.
568		587
569	=item B<geometry:> I<geom>	588	=item B<geometry:> I<geom>
570		589
571	Create the window with the specified X window geometry [default 80x24];	590	Create the window with the specified X window geometry [default 80x24];
572	option B<-geometry>.	591	option B<-geometry>.
…		…
586	Use the specified colour for the colour value I<n>, where 0-7	605	Use the specified colour for the colour value I<n>, where 0-7
587	corresponds to low-intensity (normal) colours and 8-15 corresponds to	606	corresponds to low-intensity (normal) colours and 8-15 corresponds to
588	high-intensity (bold = bright foreground, blink = bright background)	607	high-intensity (bold = bright foreground, blink = bright background)
589	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	608	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
590	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	609	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
591	names used are listed in the B<COLORS AND GRAPHICS> section.	610	names used are listed in the B<COLOURS AND GRAPHICS> section.
592		611
593	Colours higher than 15 cannot be set using resources (yet), but can be	612	Colours higher than 15 cannot be set using resources (yet), but can be
594	changed using an escape command (see @@RXVT_NAME@@(7)).	613	changed using an escape command (see @@RXVT_NAME@@(7)).
595		614
596	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	615	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
607	=item B<colorUL:> I<colour>	626	=item B<colorUL:> I<colour>
608		627
609	Use the specified colour to display underlined characters when the	628	Use the specified colour to display underlined characters when the
610	foreground colour is the default.	629	foreground colour is the default.
611		630
612	=item B<colorRV:> I<colour>
613
614	Use the specified colour as the background for reverse video characters
615	when OPTION_HC is disabled (--disable-frills).
616
617	=item B<underlineColor:> I<colour>	631	=item B<underlineColor:> I<colour>
618		632
619	If set, use the specified colour as the colour for the underline	633	If set, use the specified colour as the colour for the underline
620	itself. If unset, use the foreground colour.	634	itself. If unset, use the foreground colour.
		635
		636	=item B<highlightColor:> I<colour>
		637
		638	If set, use the specified colour as the background for highlighted
		639	characters. If unset, use reverse video.
		640
		641	=item B<highlightTextColor:> I<colour>
		642
		643	If set and highlightColor is set, use the specified colour as the
		644	foreground for highlighted characters.
621		645
622	=item B<cursorColor:> I<colour>	646	=item B<cursorColor:> I<colour>
623		647
624	Use the specified colour for the cursor. The default is to use the	648	Use the specified colour for the cursor. The default is to use the
625	foreground colour; option B<-cr>.	649	foreground colour; option B<-cr>.
…		…
632		656
633	=item B<reverseVideo:> I<boolean>	657	=item B<reverseVideo:> I<boolean>
634		658
635	B<True>: simulate reverse video by foreground and background colours;	659	B<True>: simulate reverse video by foreground and background colours;
636	option B<-rv>. B<False>: regular screen colours [default]; option	660	option B<-rv>. B<False>: regular screen colours [default]; option
637	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	661	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
638		662
639	=item B<jumpScroll:> I<boolean>	663	=item B<jumpScroll:> I<boolean>
640		664
641	B<True>: specify that jump scrolling should be used. When receiving lots	665	B<True>: specify that jump scrolling should be used. When receiving lots
642	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	666	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
656		680
657	B<False>: specify that everything is to be displayed, even	681	B<False>: specify that everything is to be displayed, even
658	if the refresh is too fast for the human eye to read anything (or the	682	if the refresh is too fast for the human eye to read anything (or the
659	monitor to display anything); option B<+ss>.	683	monitor to display anything); option B<+ss>.
660		684
661	=item B<transparent:> I<boolean>
662
663	Turn on/off illusion of a transparent window background.
664
665	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
666	future versions.
667
668	I<Please address all transparency related issues to Sasha Vasko at
669	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
670
671	=item B<fading:> I<number>	685	=item B<fading:> I<number>
672		686
673	Fade the text by the given percentage when focus is lost; option B<-fade>.	687	Fade the text by the given percentage when focus is lost; option B<-fade>.
674		688
675	=item B<fadeColor:> I<colour>	689	=item B<fadeColor:> I<colour>
676		690
677	Fade to this colour, when fading is used (see B<fading:>). The default	691	Fade to this colour, when fading is used (see B<fading:>). The default
678	colour is black; option B<-fadecolor>.	692	colour is black; option B<-fadecolor>.
679		693
680	=item B<tintColor:> I<colour>	694	=item B<iconFile:> I<file>
681		695
682	Tint the transparent background pixmap with the given colour; option	696	Set the application icon pixmap; option B<-icon>.
683	B<-tint>.
684
685	=item B<shading:> I<number>
686
687	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
688	in addition to tinting it; option B<-sh>.
689
690	=item B<blendType:> I<string>
691
692	Specify background blending type; option B<-blt>.
693
694	=item B<blurRadius:> I<number>
695
696	Apply Gaussian Blurr with the specified radius to the transparent
697	background image; option B<-blr>.
698		697
699	=item B<scrollColor:> I<colour>	698	=item B<scrollColor:> I<colour>
700		699
701	Use the specified colour for the scrollbar [default #B2B2B2].	700	Use the specified colour for the scrollbar [default #B2B2B2].
702		701
…		…
707		706
708	=item B<borderColor:> I<colour>	707	=item B<borderColor:> I<colour>
709		708
710	The colour of the border around the text area and between the scrollbar	709	The colour of the border around the text area and between the scrollbar
711	and the text.	710	and the text.
712
713	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
714
715	Use the specified image file for the background and also
716	optionally specify its scaling with a geometry string B<WxH+X+Y>,
717	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
718	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
719	centre (percent). A scale of 0 displays the image with tiling. A scale
720	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
721	an integer number of images in that direction. No image will be magnified
722	beyond 10 times its original size. The maximum permitted scale is 1000.
723	Additional operations can be specified after colon B<:op1:op2...>.
724	Supported operations are:
725
726	tile force background image to be tiled and not scaled. Equivalent to 0x0,
727	propscale will scale image keeping proportions,
728	auto will scale image to match window size. Equivalent to 100x100;
729	hscale will scale image horizontally to the window size;
730	vscale will scale image vertically to the window size;
731	scale will scale image to match window size;
732	root will tile image as if it was a root window background, auto-adjusting
733	whenever terminal window moves.
734
735	If used in conjunction with B<-tr> option, the specified pixmap will be
736	blended over transparency image using either alpha-blending, or any
737	other blending type, specified with B<-blt "type"> option.
738
739	=item B<path:> I<path>
740
741	Specify the colon-delimited search path for finding background image files.
742		711
743	=item B<font:> I<fontlist>	712	=item B<font:> I<fontlist>
744		713
745	Select the fonts to be used. This is a comma separated list of font names	714	Select the fonts to be used. This is a comma separated list of font names
746	that are checked in order when trying to find glyphs for characters. The	715	that are checked in order when trying to find glyphs for characters. The
…		…
769	it is named first) and thus defines the character cell grid to be 9 pixels	738	it is named first) and thus defines the character cell grid to be 9 pixels
770	wide and 15 pixels high.	739	wide and 15 pixels high.
771		740
772	The second font is just used to add additional unicode characters not in	741	The second font is just used to add additional unicode characters not in
773	the base font, likewise the third, which is unfortunately non-bold, but	742	the base font, likewise the third, which is unfortunately non-bold, but
774	the bold version of the font does contain less characters, so this is a	743	the bold version of the font does contain fewer characters, so this is a
775	useful supplement.	744	useful supplement.
776		745
777	The third font is an Xft font with aliasing turned off, and the characters	746	The third font is an Xft font with aliasing turned off, and the characters
778	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	747	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
779	contains other characters, but we are not interested in them.	748	contains other characters, but we are not interested in them.
…		…
803	text font will being used for the given style.	772	text font will being used for the given style.
804		773
805	=item B<intensityStyles:> I<boolean>	774	=item B<intensityStyles:> I<boolean>
806		775
807	When font styles are not enabled, or this option is enabled (B<True>,	776	When font styles are not enabled, or this option is enabled (B<True>,
808	option B<-is>, the default), bold and italic font styles imply high	777	option B<-is>, the default), bold/blink font styles imply high
809	intensity foreground/background colours. Disabling this option (B<False>,	778	intensity foreground/background colours. Disabling this option (B<False>,
810	option B<+is>) disables this behaviour, the high intensity colours are not	779	option B<+is>) disables this behaviour, the high intensity colours are not
811	reachable.	780	reachable.
812		781
813	=item B<selectstyle:> I<mode>
814
815	Set mouse selection style to B<old> which is 2.20, B<oldword> which
816	is xterm style with 2.20 old word selection, or anything else which
817	gives xterm style selection. Only effective when the original (non-perl)
818	selection code is in use.
819
820	=item B<scrollstyle:> I<mode>
821
822	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
823	the author's favourite.
824
825	=item B<title:> I<string>	782	=item B<title:> I<string>
826		783
827	Set window title string, the default title is the command-line	784	Set window title string, the default title is the command-line
828	specified after the B<-e> option, if any, otherwise the application	785	specified after the B<-e> option, if any, otherwise the application
829	name; option B<-title>.	786	name; option B<-title>.
…		…
842	=item B<urgentOnBell:> I<boolean>	799	=item B<urgentOnBell:> I<boolean>
843		800
844	B<True>: set the urgency hint for the wm on receipt of a bell character.	801	B<True>: set the urgency hint for the wm on receipt of a bell character.
845	B<False>: do not set the urgency hint [default].	802	B<False>: do not set the urgency hint [default].
846		803
		804	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		805
847	=item B<visualBell:> I<boolean>	806	=item B<visualBell:> I<boolean>
848		807
849	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	808	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
850	B<False>: no visual bell [default]; option B<+vb>.	809	B<False>: no visual bell [default]; option B<+vb>.
851		810
…		…
853		812
854	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	813	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
855	the shell; option B<-ls>. B<False>: start as a normal sub-shell	814	the shell; option B<-ls>. B<False>: start as a normal sub-shell
856	[default]; option B<+ls>.	815	[default]; option B<+ls>.
857		816
		817	=item B<multiClickTime:> I<number>
		818
		819	Specify the maximum time in milliseconds between multi-click select
		820	events. The default is 500 milliseconds; option B<-mc>.
		821
858	=item B<utmpInhibit:> I<boolean>	822	=item B<utmpInhibit:> I<boolean>
859		823
860	B<True>: inhibit writing record into the system log file B<utmp>;	824	B<True>: inhibit writing record into the system log file B<utmp>;
861	option B<-ut>. B<False>: write record into the system log file B<utmp>	825	option B<-ut>. B<False>: write record into the system log file B<utmp>
862	[default]; option B<+ut>.	826	[default]; option B<+ut>.
…		…
874	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	838	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
875		839
876	This creates a new file in your home directory with the screen contents	840	This creates a new file in your home directory with the screen contents
877	every time you hit C<Print>.	841	every time you hit C<Print>.
878		842
		843	=item B<scrollstyle:> I<mode>
		844
		845	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		846	the author's favourite.
		847
		848	=item B<thickness:> I<number>
		849
		850	Set the scrollbar width in pixels.
		851
879	=item B<scrollBar:> I<boolean>	852	=item B<scrollBar:> I<boolean>
880		853
881	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	854	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
882	disable the scrollbar; option B<+sb>.	855	disable the scrollbar; option B<+sb>.
883		856
…		…
902	B<False>: do not scroll to bottom when tty receives output; option	875	B<False>: do not scroll to bottom when tty receives output; option
903	B<+si>.	876	B<+si>.
904		877
905	=item B<scrollWithBuffer:> I<boolean>	878	=item B<scrollWithBuffer:> I<boolean>
906		879
907	B<True>: scroll with scrollback buffer when tty receives new lines (and	880	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
908	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	881	try to show the same lines) and B<scrollTtyOutput> is False; option
909	with scrollback buffer when tty receives new lines; option B<+sw>.	882	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		883	new lines; option B<+sw>.
910		884
911	=item B<scrollTtyKeypress:> I<boolean>	885	=item B<scrollTtyKeypress:> I<boolean>
912		886
913	B<True>: scroll to bottom when a non-special key is pressed. Special keys	887	B<True>: scroll to bottom when a non-special key is pressed. Special keys
914	are those which are intercepted by rxvt-unicode for special handling and	888	are those which are intercepted by rxvt-unicode for special handling and
915	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	889	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
916	bottom when a non-special key is pressed; option B<+sk>.	890	bottom when a non-special key is pressed; option B<+sk>.
917		891
918	=item B<saveLines:> I<number>	892	=item B<saveLines:> I<number>
919		893
920	Save I<number> lines in the scrollback buffer [default 64]. This	894	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
921	resource is limited on most machines to 65535; option B<-sl>.
922		895
923	=item B<internalBorder:> I<number>	896	=item B<internalBorder:> I<number>
924		897
925	Internal border of I<number> pixels. This resource is limited to 100;	898	Internal border of I<number> pixels. This resource is limited to 100;
926	option B<-b>.	899	option B<-b>.
…		…
970	=item B<cursorBlink:> I<boolean>	943	=item B<cursorBlink:> I<boolean>
971		944
972	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	945	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
973	option B<-bc>.	946	option B<-bc>.
974		947
		948	=item B<cursorUnderline:> I<boolean>
		949
		950	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		951	option B<-uc>.
		952
975	=item B<pointerBlank:> I<boolean>	953	=item B<pointerBlank:> I<boolean>
976		954
977	B<True>: blank the pointer when a key is pressed or after a set number	955	B<True>: blank the pointer when a key is pressed or after a set number
978	of seconds of inactivity. B<False>: the pointer is always visible	956	of seconds of inactivity. B<False>: the pointer is always visible
979	[default].	957	[default].
…		…
984		962
985	=item B<pointerColor2:> I<colour>	963	=item B<pointerColor2:> I<colour>
986		964
987	Mouse pointer background colour.	965	Mouse pointer background colour.
988		966
		967	=item B<pointerShape:> I<string>
		968
		969	Compile I<frills>: Specifies the name of the mouse pointer shape
		970	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		971	file for possible values (omit the C<XC_> prefix).
		972
989	=item B<pointerBlankDelay:> I<number>	973	=item B<pointerBlankDelay:> I<number>
990		974
991	Specifies number of seconds before blanking the pointer [default 2]. Use a	975	Specifies number of seconds before blanking the pointer [default 2]. Use a
992	large number (e.g. C<987654321>) to effectively disable the timeout.	976	large number (e.g. C<987654321>) to effectively disable the timeout.
993		977
994	=item B<backspacekey:> I<string>	978	=item B<backspacekey:> I<string>
995		979
996	The string to send when the backspace key is pressed. If set to B<DEC>	980	The string to send when the backspace key is pressed. If set to B<DEC>
997	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	981	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
998	(code 8) - which can be reversed with the appropriate DEC private mode	982	(code 8) - which can be reversed with the appropriate DEC private mode
999	escape sequence.	983	escape sequence.
1000		984
1001	=item B<deletekey:> I<string>	985	=item B<deletekey:> I<string>
1002		986
…		…
1019		1003
1020	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1004	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1021		1005
1022	=item B<preeditType:> I<style>	1006	=item B<preeditType:> I<style>
1023		1007
1024	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1008	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1025		1009
1026	=item B<inputMethod:> I<name>	1010	=item B<inputMethod:> I<name>
1027		1011
1028	I<name> of inputMethod to use; option B<-im>.	1012	I<name> of inputMethod to use; option B<-im>.
1029		1013
…		…
1047		1031
1048	Change the meaning of triple-click selection with the left mouse	1032	Change the meaning of triple-click selection with the left mouse
1049	button. Instead of selecting a full line it will extend the selection to	1033	button. Instead of selecting a full line it will extend the selection to
1050	the end of the logical line only; option B<-tcw>.	1034	the end of the logical line only; option B<-tcw>.
1051		1035
		1036	=item B<disablePasteBrackets:> I<boolean>
		1037
		1038	Prevent emission of paste bracket sequences; option B<-dpb>.
		1039
1052	=item B<insecure:> I<boolean>	1040	=item B<insecure:> I<boolean>
1053		1041
1054	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1042	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1055	echo arbitrary strings like the icon name or the locale. This could be	1043	echo arbitrary strings like the icon name or the locale. This could be
1056	abused if somebody gets 8-bit-clean access to your display, whether	1044	abused if somebody gets 8-bit-clean access to your display, whether
1057	through a mail client displaying mail bodies unfiltered or through	1045	through a mail client displaying mail bodies unfiltered or through
1058	write(1) or any other means. Therefore, these sequences are disabled by	1046	write(1) or any other means. Therefore, these sequences are disabled by
1059	default. (Note that many other terminals, including xterm, have these	1047	default. (Note that many other terminals, including xterm, have these
…		…
1077		1065
1078	=item B<secondaryScreen:> I<boolean>	1066	=item B<secondaryScreen:> I<boolean>
1079		1067
1080	Turn on/off secondary screen (default enabled).	1068	Turn on/off secondary screen (default enabled).
1081		1069
		1070	=item B<rewrapMode:> I<mode>
		1071
		1072	Sets long line rewrap behaviour on window resize to one of B<auto>
		1073	(default), B<always> or B<never>.
		1074
1082	=item B<secondaryScroll:> I<boolean>	1075	=item B<secondaryScroll:> I<boolean>
1083		1076
1084	Turn on/off secondary screen scroll (default enabled). If this	1077	Turn on/off secondary screen scroll (default enabled). If this
1085	option is enabled, scrolls on the secondary screen will change the	1078	option is enabled, scrolls on the secondary screen will change the
1086	scrollback buffer and switching to/from the secondary screen will	1079	scrollback buffer and, when secondaryScreen is off, switching
1087	instead scroll the screen up.	1080	to/from the secondary screen will instead scroll the screen up.
1088		1081
1089	=item B<hold>: I<boolean>	1082	=item B<hold>: I<boolean>
1090		1083
1091	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1084	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1092	will not immediately destroy its window when the program executed within	1085	will not immediately destroy its window when the program executed within
1093	it exits. Instead, it will wait till it is being killed or closed by the	1086	it exits. Instead, it will wait till it is being killed or closed by the
1094	user.	1087	user.
1095		1088
		1089	=item B<chdir>: I<path>
		1090
		1091	Sets the working directory for the shell (or the command specified via
		1092	B<-e>). The I<path> must be an absolute path and it must exist for
		1093	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1094	directory will be used; option B<-cd>.
		1095
1096	=item B<keysym.>I<sym>: I<string>	1096	=item B<keysym.>I<sym>: I<action>
1097		1097
1098	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1098	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1099	intervening resource name B<keysym.> cannot be omitted.	1099	resource name B<keysym.> cannot be omitted.
1100		1100
1101	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1101	Using this resource, you can map key combinations such as
1102	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1102	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1103	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1103	string than would normally result from that combination, making the
1104	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1104	terminal scroll up or down the way you want it, or any other thing an
1105	B<2>, B<3>, B<4>, B<5>.	1105	extension might provide.
		1106
		1107	The key combination that triggers the action, I<sym>, has the following format:
		1108
		1109	(modifiers-)key
		1110
		1111	Where I<modifiers> can be any combination of the following full or
		1112	abbreviated modifier names:
		1113
		1114	=begin table
		1115
		1116	B<ISOLevel3> B<I>
		1117	B<AppKeypad> B<K>
		1118	B<Control> B<C>
		1119	B<NumLock> B<N>
		1120	B<Shift> B<S>
		1121	B<Meta> B<M> I<or> B<A>
		1122	B<Lock> B<L>
		1123	B<Mod1> B<1>
		1124	B<Mod2> B<2>
		1125	B<Mod3> B<3>
		1126	B<Mod4> B<4>
		1127	B<Mod5> B<5>
		1128
		1129	=end table
1106		1130
1107	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1131	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1108	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1132	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1109	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1133	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1110	current application keymap mode state.	1134	current application keymap mode state.
1111		1135
1112	The spellings of I<key> can be obtained by using B<xev>(1) command or	1136	Due the the large number of modifier combinations, a key mapping will
1113	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1137	match if I<at least> the specified identifiers are being set, and no other
		1138	key mappings with those and more bits are being defined. That means that
		1139	defining a mapping for C<a> will automatically provide definitions for
		1140	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1141	themselves. See the C<builtin:> action, below, for a way to work around
		1142	this when this is a problem.
		1143
		1144	The spelling of I<key> depends on your implementation of X. An easy way to
		1145	find a key name is to use the B<xev>(1) command. You can find a list by
		1146	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1114	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1147	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1115	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1148	value (B<0x0000 - 0xFFFF>).
1116	performed in an exact manner; however, the closest match is assured.
1117		1149
1118	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1150	As with any resource value, the I<action> string may contain backslash
		1151	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1119	number), see RESOURCES in C<man 7 X> for futher details.	1152	number), see RESOURCES in C<man 7 X> for further details.
1120		1153
1121	You can define a range of keysyms in one shot by providing a I<string>	1154	An action starts with an action prefix that selects a certain type
1122	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1155	of action, followed by a colon. An action string without colons is
		1156	interpreted as a literal string to pass to the tty (as if it was
		1157	prefixed with C<string:>).
		1158
		1159	The following action prefixes are known - extensions can provide
		1160	additional prefixes:
		1161
		1162	=over
		1163
		1164	=item string:STRING
		1165
		1166	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1167	then the remaining C<STRING> will be passed to the program running in the
		1168	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1169	string C<echo rm -rf /> followed by a newline:
		1170
		1171	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1172
		1173	This could in theory be used to completely redefine your keymap.
		1174
		1175	In addition, for actions of this type, you can define a range of
		1176	keysyms in one shot by loading the C<keysym-list> perl extension and
		1177	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1123	should be a character not used by the strings.	1178	the delimiter `/' should be a character not used by the strings.
1124		1179
1125	Its usage can be demonstrated by an example:	1180	Its usage can be demonstrated by an example:
1126		1181
1127	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1182	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1128		1183
1129	The above line is equivalent to the following three lines:	1184	The above line is equivalent to the following three lines:
1130		1185
1131	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1186	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1132	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1187	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1133	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1188	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1134		1189
		1190	=item command:STRING
		1191
1135	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1192	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1136	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1193	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1194	the opposite of C<string:> - instead of sending it to the program running
		1195	in the terminal, it will be treated as if it were program output). This is
		1196	most useful to feed command sequences into @@RXVT_NAME@@.
		1197
1137	example the following means "change the current locale to C<zh_CN.GBK>	1198	For example the following means "change the current locale to C<zh_CN.GBK>
1138	when Control-Meta-c is being pressed":	1199	when Control-Meta-c is being pressed":
1139		1200
1140	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1201	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1141		1202
1142	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1203	The following example will map Control-Meta-1 and Control-Meta-2 to
1143	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1204	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1144	manpage. For example, the F<selection> extension (activated via	1205	font-switching at runtime:
1145	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1146		1206
1147	URxvt.keysym.M-C-c: perl:selection:rot13	1207	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1208	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1148		1209
1149	Due the the large number of modifier combinations, a defined key mapping	1210	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1150	will match if at I<at least> the specified identifiers are being set, and	1211	info):
1151	no other key mappings with those and more bits are being defined. That
1152	means that defining a key map for C<a> will automatically provide
1153	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1154	mappings themselves.
1155		1212
1156	Unfortunately, this will override built-in key mappings. For example	1213	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1214	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1215
		1216	=item builtin:
		1217
		1218	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1219	key binding existed for the key combination. The obvious use is to undo
		1220	the effect of existing bindings. The not so obvious use is to reinstate
		1221	bindings when another binding overrides too many modifiers.
		1222
1157	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1223	For example if you overwrite the C<Insert> key you will disable
1158	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1224	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1159	user-defined keymap using the C<builtin:> replacement:	1225	"holes" into the user-defined keymap using the C<builtin:> replacement:
1160		1226
1161	URxvt.keysym.Insert: <my insert key sequence>	1227	URxvt.keysym.Insert: <my insert key sequence>
1162	URxvt.keysym.S-Insert: builtin:	1228	URxvt.keysym.S-Insert: builtin:
1163		1229
1164	The first line defines a mapping for C<Insert> and I<any> combination	1230	The first line defines a mapping for C<Insert> and I<any> combination
1165	of modifiers. The second line re-establishes the default mapping for	1231	of modifiers. The second line re-establishes the default mapping for
1166	C<Shift-Insert>.	1232	C<Shift-Insert>.
1167		1233
1168	The following example will map Control-Meta-1 and Control-Meta-2 to	1234	=item builtin-string:
1169	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1170	font-switching at runtime:
1171		1235
1172	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1236	This action is mainly useful to restore string mappings for keys that
1173	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1237	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1238	difficult to explain - basically, this action will send the string to the
		1239	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1240	action for it.
1174		1241
1175	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1242	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1176	info):	1243	selection when you press C<Shift-Insert>. With the following bindings, it
		1244	would instead emit the (undocumented, but what applications running in the
		1245	terminal might expect) sequence C<ESC [ 2 $> instead:
1177		1246
1178	URxvt.keysym.M-C-3: command:\033[8;25;80t	1247	URxvt.keysym.S-Insert: builtin-string:
1179	URxvt.keysym.M-C-4: command:\033[8;48;110t	1248	URxvt.keysym.C-S-Insert: builtin:
		1249
		1250	The first line disables the paste functionality for that key
		1251	combination, and the second reinstates the default behaviour for
		1252	C<Control-Shift-Insert>, which would otherwise be overridden.
		1253
		1254	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1255	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1256	this:
		1257
		1258	URxvt.keysym.C-M-c: builtin-string:
		1259	URxvt.keysym.C-M-v: builtin-string:
		1260
		1261	=item EXTENSION:STRING
		1262
		1263	An action of this form invokes the action B<STRING>, if any, provided
		1264	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1265	be loaded automatically if necessary.
		1266
		1267	Not all extensions define actions, but popular extensions that do
		1268	include the I<selection> and I<matcher> extensions (documented in their
		1269	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1270	respectively).
		1271
		1272	From the silly examples department, this will rot13-"encrypt"
		1273	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1274	keyboards:
		1275
		1276	URxvt.keysym.M-C-c: selection:rot13
		1277
		1278	=item perl:STRING DEPRECATED
		1279
		1280	This is a deprecated way of invoking commands provided by perl
		1281	extensions. It is still supported, but should not be used anymore.
		1282
		1283	=back
1180		1284
1181	=item B<perl-ext-common>: I<string>	1285	=item B<perl-ext-common>: I<string>
1182		1286
1183	=item B<perl-ext>: I<string>	1287	=item B<perl-ext>: I<string>
1184		1288
1185	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1289	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1186	use in this terminal instance; option B<-pe>.	1290	use in this terminal instance; option B<-pe>.
1187		1291
1188	Extension names can be prefixed with a C<-> sign to prohibit using	1292	Extension names can be prefixed with a C<-> sign to remove them again, in
1189	them. This can be useful to selectively disable some extensions loaded	1293	case they had been specified earlier. This can be useful to selectively
1190	by default, or specified via the C<perl-ext-common> resource. For	1294	disable some extensions loaded by default, or specified via the
1191	example, C<default,-selection> will use all the default extension except	1295	C<perl-ext-common> resource. For example, C<default,-selection> will use
1192	C<selection>.	1296	all the default extensions except C<selection>.
1193		1297
1194	Extension names can also be followed by an argument in angle brackets	1298	To prohibit autoloading of extensions, you can prefix them with C</>,
1195	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1299	which will make urxvt refuse to automatically load them (this can be
1196	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1300	overriden, however, by specifying the extension name again without a
1197	multiple times with different arguments will pass multiple arguments to	1301	prefix, though). This does not prohibit extensions themselves loading
1198	the extension.	1302	other extensions. For example, C<default,/background> will keep the
		1303	C<background> extension from being loaded when a background OSC sequence
		1304	is received.
		1305
		1306	The default set includes the C<selection>, C<option-popup>,
		1307	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1308	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1309	in B<keysym> resources.
		1310
		1311	Any extension such that a corresponding resource is given on the
		1312	command line is automatically appended to B<perl-ext>.
1199		1313
1200	Each extension is looked up in the library directories, loaded if	1314	Each extension is looked up in the library directories, loaded if
1201	necessary, and bound to the current terminal instance.	1315	necessary, and bound to the current terminal instance. When the library
		1316	search path contains multiple extension files of the same name, then the
		1317	first one found will be used.
1202		1318
1203	If both of these resources are the empty string, then the perl	1319	If both of these resources are the empty string, then the perl interpreter
1204	interpreter will not be initialized. The idea behind two options is that	1320	will not be initialized. The rationale for having two options is that
1205	B<perl-ext-common> will be used for extensions that should be available to	1321	B<perl-ext-common> will be used for extensions that should be available to
1206	all instances, while B<perl-ext> is used for specific instances.	1322	all instances, while B<perl-ext> is used for specific instances.
1207		1323
1208	=item B<perl-eval>: I<string>	1324	=item B<perl-eval>: I<string>
1209		1325
1210	Perl code to be evaluated when all extensions have been registered. See	1326	Perl code to be evaluated when all extensions have been registered. See
1211	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1327	the @@RXVT_NAME@@perl(3) manpage.
1212	will be ignored when running setuid/setgid.
1213		1328
1214	=item B<perl-lib>: I<path>	1329	=item B<perl-lib>: I<path>
1215		1330
1216	Colon-separated list of additional directories that hold extension	1331	Colon-separated list of additional directories that hold extension
1217	scripts. When looking for extensions specified by the C<perl> resource,	1332	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1218	@@RXVT_NAME@@ will first look in these directories and then in	1333	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1219	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1334	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1220	will be ignored when running setuid/setgid.
1221		1335
1222	See the @@RXVT_NAME@@perl(3) manpage.	1336	See the @@RXVT_NAME@@perl(3) manpage.
1223		1337
1224	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1338	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1225		1339
…		…
1229	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1343	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1230		1344
1231	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1345	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1232	for details.	1346	for details.
1233		1347
1234	=item B<searchable-scrollback:> I<keysym>	1348	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1235		1349
1236	Sets the hotkey that starts the incremental scrollback buffer search	1350	This resource is deprecated and will be removed. Use a B<keysym> resource
1237	(default: C<M-s>).	1351	instead, e.g.:
1238		1352
		1353	URxvt.keysym.M-s: searchable-scrollback:start
		1354
1239	=item B<urlLauncher>: I<string>	1355	=item B<url-launcher>: I<string>
1240		1356
1241	Specifies the program to be started with a URL argument. Used by the	1357	Specifies the program to be started with a URL argument. Used by the
1242	C<selection-popup> and C<matcher> perl extensions.	1358	C<selection-popup> and C<matcher> perl extensions.
1243		1359
1244	=item B<transient-for>: I<windowid>	1360	=item B<transient-for>: I<windowid>
…		…
1247		1363
1248	=item B<override-redirect>: I<boolean>	1364	=item B<override-redirect>: I<boolean>
1249		1365
1250	Compile I<frills>: Sets override-redirect for the terminal window, making	1366	Compile I<frills>: Sets override-redirect for the terminal window, making
1251	it almost invisible to window managers; option B<-override-redirect>.	1367	it almost invisible to window managers; option B<-override-redirect>.
		1368
		1369	=item B<iso14755:> I<boolean>
		1370
		1371	Turn on/off ISO 14755 (default enabled).
1252		1372
1253	=item B<iso14755_52:> I<boolean>	1373	=item B<iso14755_52:> I<boolean>
1254		1374
1255	Turn on/off ISO 14755 5.2 mode (default enabled).	1375	Turn on/off ISO 14755 5.2 mode (default enabled).
1256		1376
…		…
1284	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1404	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1285		1405
1286	The behaviour of text selection and insertion/pasting mechanism is similar	1406	The behaviour of text selection and insertion/pasting mechanism is similar
1287	to I<xterm>(1).	1407	to I<xterm>(1).
1288		1408
1289	=over 4	1409	=over
1290		1410
1291	=item B<Selecting>:	1411	=item B<Selecting>:
1292		1412
1293	Left click at the beginning of the region, drag to the end of the region	1413	Left click at the beginning of the region, drag to the end of the region
1294	and release; Right click to extend the marked region; Left double-click	1414	and release; Right click to extend the marked region; Left double-click
…		…
1309	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1429	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1310		1430
1311	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1431	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1312	inserted too.	1432	inserted too.
1313		1433
		1434	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1435	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1436	binding causes the value of the internal selection to be copied to the
		1437	CLIPBOARD selection, while the second binding causes the value of the
		1438	CLIPBOARD selection to be inserted.
		1439
1314	=back	1440	=back
1315		1441
1316	=head1 CHANGING FONTS	1442	=head1 CHANGING FONTS
1317		1443
1318	Changing fonts (or font sizes, respectively) via the keypad is not yet	1444	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1335	and character codes using the keyboard. It consists of 4 parts. The	1461	and character codes using the keyboard. It consists of 4 parts. The
1336	first part is available if rxvt-unicode has been compiled with	1462	first part is available if rxvt-unicode has been compiled with
1337	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1463	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1338	with C<--enable-iso14755>.	1464	with C<--enable-iso14755>.
1339		1465
1340	=over 4	1466	=over
1341		1467
1342	=item * 5.1: Basic method	1468	=item * 5.1: Basic method
1343		1469
1344	This allows you to enter unicode characters using their hexcode.	1470	This allows you to enter unicode characters using their hexcode.
1345		1471
…		…
1399	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1525	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1400	it can be seen via the I<who(1)> command, and can accept messages. To	1526	it can be seen via the I<who(1)> command, and can accept messages. To
1401	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1527	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1402	on some systems or setgid to root or to some other group on others.	1528	on some systems or setgid to root or to some other group on others.
1403		1529
1404	=head1 COLORS AND GRAPHICS	1530	=head1 COLOURS AND GRAPHICS
1405		1531
1406	In addition to the default foreground and background colours,	1532	In addition to the default foreground and background colours,
1407	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1533	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1408	high-intensity bold/blink versions of the same). Here is a list of the	1534	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1409	colours with their names.	1535	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1536	cube plus a 8 (24) colour greyscale ramp.
		1537
		1538	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1539	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1540	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1541	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1542	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1543	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1544	use many similar 24-bit colours. It's typically not a problem in common
		1545	scenarios.
		1546
		1547	Here is a list of the ANSI colours with their names.
1410		1548
1411	=begin table	1549	=begin table
1412		1550
1413	B<color0> (black) = Black	1551	B<color0> (black) = Black
1414	B<color1> (red) = Red3	1552	B<color1> (red) = Red3
…		…
1434	It is also possible to specify the colour values of B<foreground>,	1572	It is also possible to specify the colour values of B<foreground>,
1435	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1573	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1436	a number 0-15, as a convenient shorthand to reference the colour name of	1574	a number 0-15, as a convenient shorthand to reference the colour name of
1437	color0-color15.	1575	color0-color15.
1438		1576
1439	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1577	The following text gives values for the standard 88 colour mode (and
1440	additional 72 colours. The first 64 of those (with indices 16 to 79)	1578	values for the 256 colour mode in parentheses).
1441	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1442	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1443		1579
		1580	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1581
		1582	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1583	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1584
		1585	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1586	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1587	the RGB cube.
		1588
1444	Together, all those colours implement the 88 colour xterm colours. Only	1589	Together, all those colours implement the 88 (256) colour xterm
1445	the first 16 can be changed using resources currently, the rest can only	1590	colours. Only the first 16 can be changed using resources currently, the
1446	be changed via command sequences ("escape codes").	1591	rest can only be changed via command sequences ("escape codes").
		1592
		1593	Applications are advised to use terminfo or command sequences to discover
		1594	number and RGB values of all colours (yes, you can query this...).
1447		1595
1448	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1596	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1449	always swapping the foreground/background colours. This is in contrast to	1597	always swapping the foreground/background colours. This is in contrast to
1450	I<xterm>(1) where the colours are only swapped if they have not otherwise	1598	I<xterm>(1) where the colours are only swapped if they have not otherwise
1451	been specified. For example,	1599	been specified. For example,
1452		1600
1453	=over 4
1454
1455	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1601	@@RXVT_NAME@@ -fg Black -bg White -rv
1456		1602
1457	would yield White on Black, while on I<xterm>(1) it would yield Black	1603	would yield White on Black, while on I<xterm>(1) it would yield Black on
1458	on White.	1604	White.
1459
1460	=back
1461		1605
1462	=head2 ALPHA CHANNEL SUPPORT	1606	=head2 ALPHA CHANNEL SUPPORT
1463		1607
1464	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1608	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1465	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1609	their act together, rxvt-unicode will do its own alpha channel management:
1466	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1610
1467	in addition to the ones provided by X, where the additional A component	1611	You can prefix any colour with an opaqueness percentage enclosed in
		1612	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1613	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1614	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1615	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1616	is the recommended format to specify transparency values, and works with
		1617	all ways to specify a colour.
		1618
		1619	For complete control, rxvt-unicode also supports
		1620	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1621	specifications, where the additional C<aaaa> component specifies opacity
1468	specifies opacity (alpha) values. The minimum value of C<0> is completely	1622	(alpha) values. The minimum value of C<0000> is completely transparent,
1469	transparent). You can also prefix any color with C<[percent]>, where	1623	while C<ffff> is completely opaque). The two example colours from
1470	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1624	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1471	the color, where C<0> is completely transparent and C<100> is completelxy	1625	C<rgba:0000/ff00/0000/f332>.
1472	opaque.
1473		1626
1474	You probably need to specify B<"-depth 32">, too, and have the luck that	1627	You probably need to specify B<"-depth 32">, too, to force a visual with
1475	your X-server uses ARGB pixel layout, as X is far from just supporting	1628	alpha channels, and have the luck that your X-server uses ARGB pixel
1476	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1629	layout, as X is far from just supporting ARGB visuals out of the box, and
		1630	rxvt-unicode just fudges around.
1477		1631
1478	For example, the following selects an almost completely transparent red	1632	For example, the following selects an almost completely transparent black
1479	background, and an almost opaque pink foreground:	1633	background, and an almost opaque pink foreground:
1480		1634
1481	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1635	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1482		1636
1483	I<Please note that transparency of any kind if completely unsupported by	1637	When not using a background image, then the interpretation of the
1484	the author. Don't bug him with installation questions!>	1638	alpha channel is up to your compositing manager (most interpret it as
		1639	transparency of course).
		1640
		1641	When using a background pixmap or pseudo-transparency, then the background
		1642	colour will always behave as if it were completely transparent (so the
		1643	background image shows instead), regardless of how it was specified, while
		1644	other colours will either be transparent as specified (the background
		1645	image will show through) on servers supporting the RENDER extension, or
		1646	fully opaque on servers not supporting the RENDER EXTENSION.
		1647
		1648	Please note that due to bugs in Xft, specifying alpha values might result
		1649	in garbage being displayed when the X-server does not support the RENDER
		1650	extension.
1485		1651
1486	=head1 ENVIRONMENT	1652	=head1 ENVIRONMENT
1487		1653
1488	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1654	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1489		1655
1490	=over 4	1656	=over
1491		1657
1492	=item B<TERM>	1658	=item B<TERM>
1493		1659
1494	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1660	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1495	resources or on the command line.	1661	resources or on the command line.
…		…
1523	C<--with-terminfo=PATH>.	1689	C<--with-terminfo=PATH>.
1524		1690
1525	=item B<DISPLAY>	1691	=item B<DISPLAY>
1526		1692
1527	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1693	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1528	display in its child processes.	1694	display in its child processes if C<-display> isn't used to override. It
		1695	defaults to C<:0> if it doesn't exist.
1529		1696
1530	=item B<SHELL>	1697	=item B<SHELL>
1531		1698
1532	The shell to be used for command execution, defaults to C</bin/sh>.	1699	The shell to be used for command execution, defaults to C</bin/sh>.
1533		1700
1534	=item B<RXVT_SOCKET>	1701	=item B<RXVT_SOCKET> [I<sic>]
1535		1702
1536	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1703	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1537	@@RXVT_NAME@@d(1).	1704	@@RXVT_NAME@@d(1).
1538		1705
1539	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1706	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1707
		1708	=item B<URXVT_PERL_LIB>
		1709
		1710	Additional F<:>-separated library search path for perl extensions. Will be
		1711	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1712	directory.
		1713
		1714	=item B<URXVT_PERL_VERBOSITY>
		1715
		1716	See L<@@RXVT_NAME@@perl>(3).
1540		1717
1541	=item B<HOME>	1718	=item B<HOME>
1542		1719
1543	Used to locate the default directory for the unix domain socket for	1720	Used to locate the default directory for the unix domain socket for
1544	daemon communications and to locate various resource files (such as	1721	daemon communications and to locate various resource files (such as
1545	C<.Xdefaults>)	1722	C<.Xdefaults>)
1546		1723
1547	=item B<XAPPLRESDIR>	1724	=item B<XAPPLRESDIR>
1548		1725
1549	Directory where various X resource files are being located.	1726	Directory where application-specific X resource files are located.
1550		1727
1551	=item B<XENVIRONMENT>	1728	=item B<XENVIRONMENT>
1552		1729
1553	If set and accessible, gives the name of a X resource file to be loaded by	1730	If set and accessible, gives the name of a X resource file to be loaded by
1554	@@RXVT_NAME@@.	1731	@@RXVT_NAME@@.
1555		1732
1556	=back	1733	=back
1557		1734
1558	=head1 FILES	1735	=head1 FILES
1559		1736
1560	=over 4	1737	=over
1561		1738
1562	=item B</usr/lib/X11/rgb.txt>	1739	=item B</usr/lib/X11/rgb.txt>
1563		1740
1564	Color names.	1741	Colour names.
1565		1742
1566	=back	1743	=back
1567		1744
1568	=head1 SEE ALSO	1745	=head1 SEE ALSO
1569		1746
		1747	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1570	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1748	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1571		1749
1572	=head1 CURRENT PROJECT COORDINATOR	1750	=head1 CURRENT PROJECT COORDINATOR
1573		1751
1574	=over 4	1752	=over
1575		1753
1576	=item Project Coordinator	1754	=item Project Coordinator
1577		1755
1578	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1756	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1579		1757
1580	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1758	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1581		1759
1582	=back	1760	=back
1583		1761
1584	=head1 AUTHORS	1762	=head1 AUTHORS
1585		1763
1586	=over 4	1764	=over
1587		1765
1588	=item John Bovey	1766	=item John Bovey
1589		1767
1590	University of Kent, 1992, wrote the original Xvt.	1768	University of Kent, 1992, wrote the original Xvt.
1591		1769
1592	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1770	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1593		1771
1594	very heavily modified Xvt and came up with Rxvt	1772	very heavily modified Xvt and came up with Rxvt
1595		1773
1596	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1774	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1597		1775
1598	wrote the Greek Keyboard Input (no longer in code)	1776	wrote the Greek Keyboard Input (no longer in code)
1599		1777
1600	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1778	=item mj olesen <olesen@me.QueensU.CA>
1601		1779
1602	Wrote the menu system.	1780	Wrote the menu system.
1603		1781
1604	Project Coordinator (changes.txt 2.11 to 2.21)	1782	Project Coordinator (changes.txt 2.11 to 2.21)
1605		1783
1606	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1784	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1607		1785
1608	Project Coordinator (changes.txt 2.21a to 2.4.5)	1786	Project Coordinator (changes.txt 2.21a to 2.4.5)
1609		1787
1610	=item Geoff Wing L<< <gcw@pobox.com> >>	1788	=item Geoff Wing <gcw@pobox.com>
1611		1789
1612	Rewrote screen display and text selection routines.	1790	Rewrote screen display and text selection routines.
1613		1791
1614	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1792	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1615		1793
1616	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1794	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1617		1795
1618	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1796	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1619	extension, random hacks, numerous bugfixes and extensions.	1797	extension, random hacks, numerous bugfixes and extensions.
1620		1798
1621	Project Coordinator (Changes 1.0 -)	1799	Project Coordinator (Changes 1.0 -)
1622		1800
1623	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1801	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1624		1802
1625	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1803	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1626		1804
1627	=back	1805	=back
1628		1806

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.151 by root, Wed Dec 12 19:55:55 2007 UTC vs. Revision 1.255 by root, Sat Jul 24 11:00:58 2021 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.151 by root, Wed Dec 12 19:55:55 2007 UTC vs.
Revision 1.255 by root, Sat Jul 24 11:00:58 2021 UTC