[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.155 by ayin, Mon Dec 17 23:52:44 2007 UTC vs.
Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
95	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
96		96
97	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
98	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
99	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
106	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
107		118
108	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
109		120
110	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
116	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
117		128
118	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
119		130
120	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
121
122	=item B<-tr>\|B<+tr>
123
124	Turn on/off illusion of a transparent window background; resource B<transparent>.
125
126	B<-ip> is still accepted as an obsolete alias but will be removed in
127	future versions.
128
129	I<Please address all transparency related issues to Sasha Vasko at
130	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
131		132
132	=item B<-fade> I<number>	133	=item B<-fade> I<number>
133		134
134	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
135	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
138	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
139		140
140	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
141	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
142		143
143	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
144		145
145	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
146	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
147	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
148	used to brighten or darken the image in addition to tinting it.
149	Please note that certain tint colours can be applied on the server-side,
150	thus yielding performance gain of two orders of magnitude. These colours are:
151	blue, red, green, cyan, magenta, yellow, and those close to them. Also
152	pure black and pure white colors essentially mean no tinting; resource
153	I<tintColor>. Example:
154
155	@@RXVT_NAME@@ -tr -tint blue -sh 40
156
157	=item B<-sh> I<number>
158
159	Darken (0 .. 100) or lighten (100 .. 200) the transparent
160	background image in addition to (or instead of) tinting it;
161	resource I<shading>.
162
163	=item B<-blt> I<string>
164
165	Specify background blending type. If background pixmap is specified
166	at the same time as transparency - such pixmap will be blended over
167	transparency image, using method specified. Supported values are :
168	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
169	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
170	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
171	alpha-blending. Compile I<afterimage>; resource I<blendType>.
172
173	=item B<-blr> I<HxV>
174
175	Apply Gaussian Blur with the specified radii to the transparent
176	background image. If single number is specified - both vertical and
177	horizontal radii are considered to be the same. Setting one of the
178	radii to 1 and another to a large number creates interesting effects
179	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
180	resource I<blurRadius>.
181		149
182	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
183		151
184	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
185		153
186	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
187		155
188	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
189
190	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
191
192	Compile I<afterimage>: Specify image file for the background and also
193	optionally specify its scaling with a geometry string. Note you may need to
194	add quotes to avoid special shell interpretation of the C<;> in the
195	command-line; for more details see resource B<backgroundPixmap>.
196		157
197	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
198		159
199	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
200		161
…		…
259		220
260	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
261		222
262	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
263		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
264	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
265		230
266	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
267	B<utmpInhibit>.	232	B<utmpInhibit>.
268		233
…		…
272	B<visualBell>.	237	B<visualBell>.
273		238
274	=item B<-sb>\|B<+sb>	239	=item B<-sb>\|B<+sb>
275		240
276	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>\|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>\|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
277		251
278	=item B<-si>\|B<+si>	252	=item B<-si>\|B<+si>
279		253
280	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
281	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
288	=item B<-sw>\|B<+sw>	262	=item B<-sw>\|B<+sw>
289		263
290	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
291	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
292	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
293
294	=item B<-sr>\|B<+sr>
295
296	Put scrollbar on right/left; resource B<scrollBar_right>.
297
298	=item B<-st>\|B<+st>
299
300	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
301	resource B<scrollBar_floating>.
302		267
303	=item B<-ptab>\|B<+ptab>	268	=item B<-ptab>\|B<+ptab>
304		269
305	If enabled (default), "Horizontal Tab" characters are being stored as	270	If enabled (default), "Horizontal Tab" characters are being stored as
306	actual wide characters in the screen buffer, which makes it possible to	271	actual wide characters in the screen buffer, which makes it possible to
…		…
310		275
311	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
312		277
313	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
314		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
315	=item B<-iconic>	284	=item B<-iconic>
316		285
317	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
318	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
319		288
…		…
335		304
336	=item B<-bl>	305	=item B<-bl>
337		306
338	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
339	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
340	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
341		311
342	=item B<-override-redirect>	312	=item B<-override-redirect>
343		313
344	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
345	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
346		321
347	=item B<-sbg>	322	=item B<-sbg>
348		323
349	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
350	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
354	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
355		330
356	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
357	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
358	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
359		341
360	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
361		343
362	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
363	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
398	=item B<-pt> I<style>	380	=item B<-pt> I<style>
399		381
400	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
401	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
402		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
403	=item B<-im> I<text>	388	=item B<-im> I<text>
404		389
405	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
406		391
407	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
421	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
422	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
423	in-use. Instead of selecting a full line it will extend the selection to	408	in-use. Instead of selecting a full line it will extend the selection to
424	the end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
425		410
		411	=item B<-dpb>\|B<+dpb>
		412
		413	Compile frills: Disable (or enable) emitting bracketed paste mode
		414	sequences (default enabled). Bracketed paste mode allows programs
		415	to detect when something is pasted. Since more and more programs
		416	abuse this, these sequences can be disabled. The command sequences to
		417	enable and query paste mode will still work, but the actual bracket
		418	sequences will no longer be emitted. You can also toggle this from the
		419	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		420
426	=item B<-insecure>	421	=item B<-insecure>
427		422
428	Enable "insecure" mode, which currently enables most of the escape	423	Enable "insecure" mode, which currently enables most of the escape
429	sequences that echo strings. See the resource B<insecure> for more	424	sequences that echo strings. See the resource B<insecure> for more
430	info.	425	info.
…		…
442		437
443	=item B<-ssr>\|B<+ssr>	438	=item B<-ssr>\|B<+ssr>
444		439
445	Turn on/off secondary screen scroll (default enabled); resource	440	Turn on/off secondary screen scroll (default enabled); resource
446	B<secondaryScroll>.	441	B<secondaryScroll>.
		442
		443	=item B<-rm> I<mode>
		444
		445	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		446	to one of B<auto> (the default), B<always> or B<never>. The latter two
		447	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		448	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		449	B<rewrapMode>.
447		450
448	=item B<-hold>\|B<+hold>	451	=item B<-hold>\|B<+hold>
449		452
450	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	453	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
451	will not immediately destroy its window when the program executed within	454	will not immediately destroy its window when the program executed within
452	it exits. Instead, it will wait till it is being killed or closed by the	455	it exits. Instead, it will wait till it is being killed or closed by the
453	user; resource B<hold>.	456	user; resource B<hold>.
		457
		458	=item B<-cd> I<path>
		459
		460	Sets the working directory for the shell (or the command specified via
		461	B<-e>). The I<path> must be an absolute path and it must exist for
		462	@@RXVT_NAME@@ to start; resource B<chdir>.
454		463
455	=item B<-xrm> I<string>	464	=item B<-xrm> I<string>
456		465
457	Works like the X Toolkit option of the same name, by adding the I<string>	466	Works like the X Toolkit option of the same name, by adding the I<string>
458	as if it were specified in a resource file. Resource values specified this	467	as if it were specified in a resource file. Resource values specified this
…		…
524		533
525	# now communicate with rxvt	534	# now communicate with rxvt
526	my $slave = $pty->slave;	535	my $slave = $pty->slave;
527	while (<$slave>) { print $slave "got <$_>\n" }	536	while (<$slave>) { print $slave "got <$_>\n" }
528		537
		538	Note that, despite what the name might imply, the file descriptor does not
		539	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		540	domain or tcp socket). While tty operations cannot be done in this case,
		541	B<@@RXVT_NAME@@> can still be remote controlled with it:
		542
		543	use Socket;
		544	use Fcntl;
		545
		546	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		547	fcntl $slave, Fcntl::F_SETFD, 0;
		548	system "exec @@RXVT_NAME\|\| -pty-fd " . (fileno $slave) . " &";
		549	close $slave;
		550
		551	syswrite $URXVT, "Type a secret password: ";
		552	my $secret = do { local $/ = "\r"; <$URXVT> };
		553	print "Not so secret anymore: $secret\n";
		554
529	=item B<-pe> I<string>	555	=item B<-pe> I<string>
530		556
531	Comma-separated list of perl extension scripts to use (or not to use) in	557	Comma-separated list of perl extension scripts to use (or not to use) in
532	this terminal instance. See resource B<perl-ext> for details.	558	this terminal instance. See resource B<perl-ext> for details.
533		559
…		…
542	You can set and change the resources using X11 tools like B<xrdb>. Many	568	You can set and change the resources using X11 tools like B<xrdb>. Many
543	distribution do also load settings from the B<~/.Xresources> file when X	569	distribution do also load settings from the B<~/.Xresources> file when X
544	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	570	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
545	with later settings overwriting earlier ones:	571	with later settings overwriting earlier ones:
546		572
547	1. system-wide app-defaults file, either locale-dependent OR global
548	2. app-defaults file in $XAPPLRESDIR	573	1. app-defaults file in $XAPPLRESDIR
		574	2. $HOME/.Xdefaults
549	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	575	3. RESOURCE_MANAGER property on root-window of screen 0
550	4. SCREEN_RESOURCES for the current screen	576	4. SCREEN_RESOURCES property on root-window of the current screen
551	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	577	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
552	6. resources specified via -xrm on the commandline	578	6. resources specified via -xrm on the commandline
553		579
554	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	580	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
555	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	581	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
560	be used. Command-line arguments can be used to override resource	586	be used. Command-line arguments can be used to override resource
561	settings. The following resources are supported (you might want to	587	settings. The following resources are supported (you might want to
562	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	588	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
563	extensions not documented here):	589	extensions not documented here):
564		590
565	=over 4	591	=over
566		592
567	=item B<depth:> I<bitdepth>	593	=item B<depth:> I<bitdepth>
568		594
569	Compile I<xft>: Attempt to find a visual with the given bit depth;	595	Compile I<xft>: Attempt to find a visual with the given bit depth;
570	option B<-depth>.	596	option B<-depth>.
		597
		598	=item B<buffered:> I<boolean>
		599
		600	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		601	On some card/driver combination enabling it slightly decreases
		602	performance, on most it greatly helps it. The slowdown is small, so it
		603	should normally be enabled.
571		604
572	=item B<geometry:> I<geom>	605	=item B<geometry:> I<geom>
573		606
574	Create the window with the specified X window geometry [default 80x24];	607	Create the window with the specified X window geometry [default 80x24];
575	option B<-geometry>.	608	option B<-geometry>.
…		…
589	Use the specified colour for the colour value I<n>, where 0-7	622	Use the specified colour for the colour value I<n>, where 0-7
590	corresponds to low-intensity (normal) colours and 8-15 corresponds to	623	corresponds to low-intensity (normal) colours and 8-15 corresponds to
591	high-intensity (bold = bright foreground, blink = bright background)	624	high-intensity (bold = bright foreground, blink = bright background)
592	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	625	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
593	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	626	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
594	names used are listed in the B<COLORS AND GRAPHICS> section.	627	names used are listed in the B<COLOURS AND GRAPHICS> section.
595		628
596	Colours higher than 15 cannot be set using resources (yet), but can be	629	Colours higher than 15 cannot be set using resources (yet), but can be
597	changed using an escape command (see @@RXVT_NAME@@(7)).	630	changed using an escape command (see @@RXVT_NAME@@(7)).
598		631
599	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	632	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
610	=item B<colorUL:> I<colour>	643	=item B<colorUL:> I<colour>
611		644
612	Use the specified colour to display underlined characters when the	645	Use the specified colour to display underlined characters when the
613	foreground colour is the default.	646	foreground colour is the default.
614		647
615	=item B<colorRV:> I<colour>
616
617	Use the specified colour as the background for reverse video characters
618	when OPTION_HC is disabled (--disable-frills).
619
620	=item B<underlineColor:> I<colour>	648	=item B<underlineColor:> I<colour>
621		649
622	If set, use the specified colour as the colour for the underline	650	If set, use the specified colour as the colour for the underline
623	itself. If unset, use the foreground colour.	651	itself. If unset, use the foreground colour.
		652
		653	=item B<highlightColor:> I<colour>
		654
		655	If set, use the specified colour as the background for highlighted
		656	characters. If unset, use reverse video.
		657
		658	=item B<highlightTextColor:> I<colour>
		659
		660	If set and highlightColor is set, use the specified colour as the
		661	foreground for highlighted characters.
624		662
625	=item B<cursorColor:> I<colour>	663	=item B<cursorColor:> I<colour>
626		664
627	Use the specified colour for the cursor. The default is to use the	665	Use the specified colour for the cursor. The default is to use the
628	foreground colour; option B<-cr>.	666	foreground colour; option B<-cr>.
…		…
635		673
636	=item B<reverseVideo:> I<boolean>	674	=item B<reverseVideo:> I<boolean>
637		675
638	B<True>: simulate reverse video by foreground and background colours;	676	B<True>: simulate reverse video by foreground and background colours;
639	option B<-rv>. B<False>: regular screen colours [default]; option	677	option B<-rv>. B<False>: regular screen colours [default]; option
640	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	678	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
641		679
642	=item B<jumpScroll:> I<boolean>	680	=item B<jumpScroll:> I<boolean>
643		681
644	B<True>: specify that jump scrolling should be used. When receiving lots	682	B<True>: specify that jump scrolling should be used. When receiving lots
645	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	683	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
659		697
660	B<False>: specify that everything is to be displayed, even	698	B<False>: specify that everything is to be displayed, even
661	if the refresh is too fast for the human eye to read anything (or the	699	if the refresh is too fast for the human eye to read anything (or the
662	monitor to display anything); option B<+ss>.	700	monitor to display anything); option B<+ss>.
663		701
664	=item B<transparent:> I<boolean>
665
666	Turn on/off illusion of a transparent window background.
667
668	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
669	future versions.
670
671	I<Please address all transparency related issues to Sasha Vasko at
672	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
673
674	=item B<fading:> I<number>	702	=item B<fading:> I<number>
675		703
676	Fade the text by the given percentage when focus is lost; option B<-fade>.	704	Fade the text by the given percentage when focus is lost; option B<-fade>.
677		705
678	=item B<fadeColor:> I<colour>	706	=item B<fadeColor:> I<colour>
679		707
680	Fade to this colour, when fading is used (see B<fading:>). The default	708	Fade to this colour, when fading is used (see B<fading:>). The default
681	colour is black; option B<-fadecolor>.	709	colour is black; option B<-fadecolor>.
682		710
683	=item B<tintColor:> I<colour>	711	=item B<iconFile:> I<file>
684		712
685	Tint the transparent background pixmap with the given colour; option	713	Set the application icon pixmap; option B<-icon>.
686	B<-tint>.
687
688	=item B<shading:> I<number>
689
690	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
691	in addition to tinting it; option B<-sh>.
692
693	=item B<blendType:> I<string>
694
695	Specify background blending type; option B<-blt>.
696
697	=item B<blurRadius:> I<number>
698
699	Apply Gaussian Blurr with the specified radius to the transparent
700	background image; option B<-blr>.
701		714
702	=item B<scrollColor:> I<colour>	715	=item B<scrollColor:> I<colour>
703		716
704	Use the specified colour for the scrollbar [default #B2B2B2].	717	Use the specified colour for the scrollbar [default #B2B2B2].
705		718
…		…
710		723
711	=item B<borderColor:> I<colour>	724	=item B<borderColor:> I<colour>
712		725
713	The colour of the border around the text area and between the scrollbar	726	The colour of the border around the text area and between the scrollbar
714	and the text.	727	and the text.
715
716	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
717
718	Use the specified image file for the background and also
719	optionally specify its scaling with a geometry string B<WxH+X+Y>,
720	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
721	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
722	centre (percent). A scale of 0 displays the image with tiling. A scale
723	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
724	an integer number of images in that direction. No image will be magnified
725	beyond 10 times its original size. The maximum permitted scale is 1000.
726	Additional operations can be specified after colon B<:op1:op2...>.
727	Supported operations are:
728
729	tile force background image to be tiled and not scaled. Equivalent to 0x0,
730	propscale will scale image keeping proportions,
731	auto will scale image to match window size. Equivalent to 100x100;
732	hscale will scale image horizontally to the window size;
733	vscale will scale image vertically to the window size;
734	scale will scale image to match window size;
735	root will tile image as if it was a root window background, auto-adjusting
736	whenever terminal window moves.
737
738	If used in conjunction with B<-tr> option, the specified pixmap will be
739	blended over transparency image using either alpha-blending, or any
740	other blending type, specified with B<-blt "type"> option.
741
742	=item B<path:> I<path>
743
744	Specify the colon-delimited search path for finding background image files.
745		728
746	=item B<font:> I<fontlist>	729	=item B<font:> I<fontlist>
747		730
748	Select the fonts to be used. This is a comma separated list of font names	731	Select the fonts to be used. This is a comma separated list of font names
749	that are checked in order when trying to find glyphs for characters. The	732	that are checked in order when trying to find glyphs for characters. The
…		…
772	it is named first) and thus defines the character cell grid to be 9 pixels	755	it is named first) and thus defines the character cell grid to be 9 pixels
773	wide and 15 pixels high.	756	wide and 15 pixels high.
774		757
775	The second font is just used to add additional unicode characters not in	758	The second font is just used to add additional unicode characters not in
776	the base font, likewise the third, which is unfortunately non-bold, but	759	the base font, likewise the third, which is unfortunately non-bold, but
777	the bold version of the font does contain less characters, so this is a	760	the bold version of the font does contain fewer characters, so this is a
778	useful supplement.	761	useful supplement.
779		762
780	The third font is an Xft font with aliasing turned off, and the characters	763	The third font is an Xft font with aliasing turned off, and the characters
781	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	764	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
782	contains other characters, but we are not interested in them.	765	contains other characters, but we are not interested in them.
…		…
811	option B<-is>, the default), bold/blink font styles imply high	794	option B<-is>, the default), bold/blink font styles imply high
812	intensity foreground/background colours. Disabling this option (B<False>,	795	intensity foreground/background colours. Disabling this option (B<False>,
813	option B<+is>) disables this behaviour, the high intensity colours are not	796	option B<+is>) disables this behaviour, the high intensity colours are not
814	reachable.	797	reachable.
815		798
816	=item B<scrollstyle:> I<mode>
817
818	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
819	the author's favourite.
820
821	=item B<title:> I<string>	799	=item B<title:> I<string>
822		800
823	Set window title string, the default title is the command-line	801	Set window title string, the default title is the command-line
824	specified after the B<-e> option, if any, otherwise the application	802	specified after the B<-e> option, if any, otherwise the application
825	name; option B<-title>.	803	name; option B<-title>.
…		…
838	=item B<urgentOnBell:> I<boolean>	816	=item B<urgentOnBell:> I<boolean>
839		817
840	B<True>: set the urgency hint for the wm on receipt of a bell character.	818	B<True>: set the urgency hint for the wm on receipt of a bell character.
841	B<False>: do not set the urgency hint [default].	819	B<False>: do not set the urgency hint [default].
842		820
		821	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		822
843	=item B<visualBell:> I<boolean>	823	=item B<visualBell:> I<boolean>
844		824
845	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	825	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
846	B<False>: no visual bell [default]; option B<+vb>.	826	B<False>: no visual bell [default]; option B<+vb>.
847		827
…		…
849		829
850	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	830	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
851	the shell; option B<-ls>. B<False>: start as a normal sub-shell	831	the shell; option B<-ls>. B<False>: start as a normal sub-shell
852	[default]; option B<+ls>.	832	[default]; option B<+ls>.
853		833
		834	=item B<multiClickTime:> I<number>
		835
		836	Specify the maximum time in milliseconds between multi-click select
		837	events. The default is 500 milliseconds; option B<-mc>.
		838
854	=item B<utmpInhibit:> I<boolean>	839	=item B<utmpInhibit:> I<boolean>
855		840
856	B<True>: inhibit writing record into the system log file B<utmp>;	841	B<True>: inhibit writing record into the system log file B<utmp>;
857	option B<-ut>. B<False>: write record into the system log file B<utmp>	842	option B<-ut>. B<False>: write record into the system log file B<utmp>
858	[default]; option B<+ut>.	843	[default]; option B<+ut>.
…		…
870	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	855	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
871		856
872	This creates a new file in your home directory with the screen contents	857	This creates a new file in your home directory with the screen contents
873	every time you hit C<Print>.	858	every time you hit C<Print>.
874		859
		860	=item B<scrollstyle:> I<mode>
		861
		862	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		863	the author's favourite.
		864
		865	=item B<thickness:> I<number>
		866
		867	Set the scrollbar width in pixels.
		868
875	=item B<scrollBar:> I<boolean>	869	=item B<scrollBar:> I<boolean>
876		870
877	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	871	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
878	disable the scrollbar; option B<+sb>.	872	disable the scrollbar; option B<+sb>.
879		873
…		…
898	B<False>: do not scroll to bottom when tty receives output; option	892	B<False>: do not scroll to bottom when tty receives output; option
899	B<+si>.	893	B<+si>.
900		894
901	=item B<scrollWithBuffer:> I<boolean>	895	=item B<scrollWithBuffer:> I<boolean>
902		896
903	B<True>: scroll with scrollback buffer when tty receives new lines (and	897	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
904	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	898	try to show the same lines) and B<scrollTtyOutput> is False; option
905	with scrollback buffer when tty receives new lines; option B<+sw>.	899	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		900	new lines; option B<+sw>.
906		901
907	=item B<scrollTtyKeypress:> I<boolean>	902	=item B<scrollTtyKeypress:> I<boolean>
908		903
909	B<True>: scroll to bottom when a non-special key is pressed. Special keys	904	B<True>: scroll to bottom when a non-special key is pressed. Special keys
910	are those which are intercepted by rxvt-unicode for special handling and	905	are those which are intercepted by rxvt-unicode for special handling and
911	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	906	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
912	bottom when a non-special key is pressed; option B<+sk>.	907	bottom when a non-special key is pressed; option B<+sk>.
913		908
914	=item B<saveLines:> I<number>	909	=item B<saveLines:> I<number>
915		910
916	Save I<number> lines in the scrollback buffer [default 64]. This	911	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
917	resource is limited on most machines to 65535; option B<-sl>.
918		912
919	=item B<internalBorder:> I<number>	913	=item B<internalBorder:> I<number>
920		914
921	Internal border of I<number> pixels. This resource is limited to 100;	915	Internal border of I<number> pixels. This resource is limited to 100;
922	option B<-b>.	916	option B<-b>.
…		…
966	=item B<cursorBlink:> I<boolean>	960	=item B<cursorBlink:> I<boolean>
967		961
968	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	962	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
969	option B<-bc>.	963	option B<-bc>.
970		964
		965	=item B<cursorUnderline:> I<boolean>
		966
		967	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		968	option B<-uc>.
		969
971	=item B<pointerBlank:> I<boolean>	970	=item B<pointerBlank:> I<boolean>
972		971
973	B<True>: blank the pointer when a key is pressed or after a set number	972	B<True>: blank the pointer when a key is pressed or after a set number
974	of seconds of inactivity. B<False>: the pointer is always visible	973	of seconds of inactivity. B<False>: the pointer is always visible
975	[default].	974	[default].
…		…
980		979
981	=item B<pointerColor2:> I<colour>	980	=item B<pointerColor2:> I<colour>
982		981
983	Mouse pointer background colour.	982	Mouse pointer background colour.
984		983
		984	=item B<pointerShape:> I<string>
		985
		986	Compile I<frills>: Specifies the name of the mouse pointer shape
		987	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		988	file for possible values (omit the C<XC_> prefix).
		989
985	=item B<pointerBlankDelay:> I<number>	990	=item B<pointerBlankDelay:> I<number>
986		991
987	Specifies number of seconds before blanking the pointer [default 2]. Use a	992	Specifies number of seconds before blanking the pointer [default 2]. Use a
988	large number (e.g. C<987654321>) to effectively disable the timeout.	993	large number (e.g. C<987654321>) to effectively disable the timeout.
989		994
990	=item B<backspacekey:> I<string>	995	=item B<backspacekey:> I<string>
991		996
992	The string to send when the backspace key is pressed. If set to B<DEC>	997	The string to send when the backspace key is pressed. If set to B<DEC>
993	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	998	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
994	(code 8) - which can be reversed with the appropriate DEC private mode	999	(code 8) - which can be reversed with the appropriate DEC private mode
995	escape sequence.	1000	escape sequence.
996		1001
997	=item B<deletekey:> I<string>	1002	=item B<deletekey:> I<string>
998		1003
…		…
1015		1020
1016	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1021	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1017		1022
1018	=item B<preeditType:> I<style>	1023	=item B<preeditType:> I<style>
1019		1024
1020	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1025	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1021		1026
1022	=item B<inputMethod:> I<name>	1027	=item B<inputMethod:> I<name>
1023		1028
1024	I<name> of inputMethod to use; option B<-im>.	1029	I<name> of inputMethod to use; option B<-im>.
1025		1030
…		…
1043		1048
1044	Change the meaning of triple-click selection with the left mouse	1049	Change the meaning of triple-click selection with the left mouse
1045	button. Instead of selecting a full line it will extend the selection to	1050	button. Instead of selecting a full line it will extend the selection to
1046	the end of the logical line only; option B<-tcw>.	1051	the end of the logical line only; option B<-tcw>.
1047		1052
		1053	=item B<disablePasteBrackets:> I<boolean>
		1054
		1055	Prevent emission of paste bracket sequences; option B<-dpb>.
		1056
1048	=item B<insecure:> I<boolean>	1057	=item B<insecure:> I<boolean>
1049		1058
1050	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1059	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1051	echo arbitrary strings like the icon name or the locale. This could be	1060	echo arbitrary strings like the icon name or the locale. This could be
1052	abused if somebody gets 8-bit-clean access to your display, whether	1061	abused if somebody gets 8-bit-clean access to your display, whether
1053	through a mail client displaying mail bodies unfiltered or through	1062	through a mail client displaying mail bodies unfiltered or through
1054	write(1) or any other means. Therefore, these sequences are disabled by	1063	write(1) or any other means. Therefore, these sequences are disabled by
1055	default. (Note that many other terminals, including xterm, have these	1064	default. (Note that many other terminals, including xterm, have these
…		…
1073		1082
1074	=item B<secondaryScreen:> I<boolean>	1083	=item B<secondaryScreen:> I<boolean>
1075		1084
1076	Turn on/off secondary screen (default enabled).	1085	Turn on/off secondary screen (default enabled).
1077		1086
		1087	=item B<rewrapMode:> I<mode>
		1088
		1089	Sets long line rewrap behaviour on window resize to one of B<auto>
		1090	(default), B<always> or B<never>.
		1091
1078	=item B<secondaryScroll:> I<boolean>	1092	=item B<secondaryScroll:> I<boolean>
1079		1093
1080	Turn on/off secondary screen scroll (default enabled). If this	1094	Turn on/off secondary screen scroll (default enabled). If this
1081	option is enabled, scrolls on the secondary screen will change the	1095	option is enabled, scrolls on the secondary screen will change the
1082	scrollback buffer and switching to/from the secondary screen will	1096	scrollback buffer and, when secondaryScreen is off, switching
1083	instead scroll the screen up.	1097	to/from the secondary screen will instead scroll the screen up.
1084		1098
1085	=item B<hold>: I<boolean>	1099	=item B<hold>: I<boolean>
1086		1100
1087	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1101	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1088	will not immediately destroy its window when the program executed within	1102	will not immediately destroy its window when the program executed within
1089	it exits. Instead, it will wait till it is being killed or closed by the	1103	it exits. Instead, it will wait till it is being killed or closed by the
1090	user.	1104	user.
1091		1105
		1106	=item B<chdir>: I<path>
		1107
		1108	Sets the working directory for the shell (or the command specified via
		1109	B<-e>). The I<path> must be an absolute path and it must exist for
		1110	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1111	directory will be used; option B<-cd>.
		1112
1092	=item B<keysym.>I<sym>: I<string>	1113	=item B<keysym.>I<sym>: I<action>
1093		1114
1094	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1115	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1095	intervening resource name B<keysym.> cannot be omitted.	1116	resource name B<keysym.> cannot be omitted.
1096		1117
1097	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1118	Using this resource, you can map key combinations such as
1098	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1119	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1099	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1120	string than would normally result from that combination, making the
1100	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1121	terminal scroll up or down the way you want it, or any other thing an
1101	B<2>, B<3>, B<4>, B<5>.	1122	extension might provide.
		1123
		1124	The key combination that triggers the action, I<sym>, has the following format:
		1125
		1126	(modifiers-)key
		1127
		1128	Where I<modifiers> can be any combination of the following full or
		1129	abbreviated modifier names:
		1130
		1131	=begin table
		1132
		1133	B<ISOLevel3> B<I>
		1134	B<AppKeypad> B<K>
		1135	B<Control> B<C>
		1136	B<NumLock> B<N>
		1137	B<Shift> B<S>
		1138	B<Meta> B<M> I<or> B<A>
		1139	B<Lock> B<L>
		1140	B<Mod1> B<1>
		1141	B<Mod2> B<2>
		1142	B<Mod3> B<3>
		1143	B<Mod4> B<4>
		1144	B<Mod5> B<5>
		1145
		1146	=end table
1102		1147
1103	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1148	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1104	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1149	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1105	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1150	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1106	current application keymap mode state.	1151	current application keymap mode state.
1107		1152
1108	The spellings of I<key> can be obtained by using B<xev>(1) command or	1153	Due the the large number of modifier combinations, a key mapping will
1109	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1154	match if I<at least> the specified identifiers are being set, and no other
		1155	key mappings with those and more bits are being defined. That means that
		1156	defining a mapping for C<a> will automatically provide definitions for
		1157	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1158	themselves. See the C<builtin:> action, below, for a way to work around
		1159	this when this is a problem.
		1160
		1161	The spelling of I<key> depends on your implementation of X. An easy way to
		1162	find a key name is to use the B<xev>(1) command. You can find a list by
		1163	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1110	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1164	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1111	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1165	value (B<0x0000 - 0xFFFF>).
1112	performed in an exact manner; however, the closest match is assured.
1113		1166
1114	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1167	As with any resource value, the I<action> string may contain backslash
		1168	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1115	number), see RESOURCES in C<man 7 X> for futher details.	1169	number), see RESOURCES in C<man 7 X> for further details.
1116		1170
1117	You can define a range of keysyms in one shot by providing a I<string>	1171	An action starts with an action prefix that selects a certain type
1118	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1172	of action, followed by a colon. An action string without colons is
		1173	interpreted as a literal string to pass to the tty (as if it was
		1174	prefixed with C<string:>).
		1175
		1176	The following action prefixes are known - extensions can provide
		1177	additional prefixes:
		1178
		1179	=over
		1180
		1181	=item string:STRING
		1182
		1183	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1184	then the remaining C<STRING> will be passed to the program running in the
		1185	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1186	string C<echo rm -rf /> followed by a newline:
		1187
		1188	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1189
		1190	This could in theory be used to completely redefine your keymap.
		1191
		1192	In addition, for actions of this type, you can define a range of
		1193	keysyms in one shot by loading the C<keysym-list> perl extension and
		1194	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1119	should be a character not used by the strings.	1195	the delimiter `/' should be a character not used by the strings.
1120		1196
1121	Its usage can be demonstrated by an example:	1197	Its usage can be demonstrated by an example:
1122		1198
1123	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1199	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1124		1200
1125	The above line is equivalent to the following three lines:	1201	The above line is equivalent to the following three lines:
1126		1202
1127	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1203	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1128	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1204	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1129	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1205	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1130		1206
		1207	=item command:STRING
		1208
1131	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1209	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1132	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1210	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1211	the opposite of C<string:> - instead of sending it to the program running
		1212	in the terminal, it will be treated as if it were program output). This is
		1213	most useful to feed command sequences into @@RXVT_NAME@@.
		1214
1133	example the following means "change the current locale to C<zh_CN.GBK>	1215	For example the following means "change the current locale to C<zh_CN.GBK>
1134	when Control-Meta-c is being pressed":	1216	when Control-Meta-c is being pressed":
1135		1217
1136	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1218	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1137		1219
1138	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1220	The following example will map Control-Meta-1 and Control-Meta-2 to
1139	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1221	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1140	manpage. For example, the F<selection> extension (activated via	1222	font-switching at runtime:
1141	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1142		1223
1143	URxvt.keysym.M-C-c: perl:selection:rot13	1224	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1225	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1144		1226
1145	Due the the large number of modifier combinations, a defined key mapping	1227	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1146	will match if at I<at least> the specified identifiers are being set, and	1228	info):
1147	no other key mappings with those and more bits are being defined. That
1148	means that defining a key map for C<a> will automatically provide
1149	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1150	mappings themselves.
1151		1229
1152	Unfortunately, this will override built-in key mappings. For example	1230	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1231	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1232
		1233	=item builtin:
		1234
		1235	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1236	key binding existed for the key combination. The obvious use is to undo
		1237	the effect of existing bindings. The not so obvious use is to reinstate
		1238	bindings when another binding overrides too many modifiers.
		1239
1153	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1240	For example if you overwrite the C<Insert> key you will disable
1154	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1241	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1155	user-defined keymap using the C<builtin:> replacement:	1242	"holes" into the user-defined keymap using the C<builtin:> replacement:
1156		1243
1157	URxvt.keysym.Insert: <my insert key sequence>	1244	URxvt.keysym.Insert: <my insert key sequence>
1158	URxvt.keysym.S-Insert: builtin:	1245	URxvt.keysym.S-Insert: builtin:
1159		1246
1160	The first line defines a mapping for C<Insert> and I<any> combination	1247	The first line defines a mapping for C<Insert> and I<any> combination
1161	of modifiers. The second line re-establishes the default mapping for	1248	of modifiers. The second line re-establishes the default mapping for
1162	C<Shift-Insert>.	1249	C<Shift-Insert>.
1163		1250
1164	The following example will map Control-Meta-1 and Control-Meta-2 to	1251	=item builtin-string:
1165	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1166	font-switching at runtime:
1167		1252
1168	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1253	This action is mainly useful to restore string mappings for keys that
1169	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1254	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1255	difficult to explain - basically, this action will send the string to the
		1256	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1257	action for it.
1170		1258
1171	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1259	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1172	info):	1260	selection when you press C<Shift-Insert>. With the following bindings, it
		1261	would instead emit the (undocumented, but what applications running in the
		1262	terminal might expect) sequence C<ESC [ 2 $> instead:
1173		1263
1174	URxvt.keysym.M-C-3: command:\033[8;25;80t	1264	URxvt.keysym.S-Insert: builtin-string:
1175	URxvt.keysym.M-C-4: command:\033[8;48;110t	1265	URxvt.keysym.C-S-Insert: builtin:
		1266
		1267	The first line disables the paste functionality for that key
		1268	combination, and the second reinstates the default behaviour for
		1269	C<Control-Shift-Insert>, which would otherwise be overridden.
		1270
		1271	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1272	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1273	this:
		1274
		1275	URxvt.keysym.C-M-c: builtin-string:
		1276	URxvt.keysym.C-M-v: builtin-string:
		1277
		1278	=item EXTENSION:STRING
		1279
		1280	An action of this form invokes the action B<STRING>, if any, provided
		1281	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1282	be loaded automatically if necessary.
		1283
		1284	Not all extensions define actions, but popular extensions that do
		1285	include the I<selection> and I<matcher> extensions (documented in their
		1286	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1287	respectively).
		1288
		1289	From the silly examples department, this will rot13-"encrypt"
		1290	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1291	keyboards:
		1292
		1293	URxvt.keysym.M-C-c: selection:rot13
		1294
		1295	=item perl:STRING DEPRECATED
		1296
		1297	This is a deprecated way of invoking commands provided by perl
		1298	extensions. It is still supported, but should not be used anymore.
		1299
		1300	=back
1176		1301
1177	=item B<perl-ext-common>: I<string>	1302	=item B<perl-ext-common>: I<string>
1178		1303
1179	=item B<perl-ext>: I<string>	1304	=item B<perl-ext>: I<string>
1180		1305
1181	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1306	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1182	use in this terminal instance; option B<-pe>.	1307	use in this terminal instance; option B<-pe>.
1183		1308
1184	Extension names can be prefixed with a C<-> sign to prohibit using	1309	Extension names can be prefixed with a C<-> sign to remove them again, in
1185	them. This can be useful to selectively disable some extensions loaded	1310	case they had been specified earlier. This can be useful to selectively
1186	by default, or specified via the C<perl-ext-common> resource. For	1311	disable some extensions loaded by default, or specified via the
1187	example, C<default,-selection> will use all the default extension except	1312	C<perl-ext-common> resource. For example, C<default,-selection> will use
1188	C<selection>.	1313	all the default extensions except C<selection>.
1189		1314
1190	Extension names can also be followed by an argument in angle brackets	1315	To prohibit autoloading of extensions, you can prefix them with C</>,
1191	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1316	which will make urxvt refuse to automatically load them (this can be
1192	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1317	overriden, however, by specifying the extension name again without a
1193	multiple times with different arguments will pass multiple arguments to	1318	prefix, though). This does not prohibit extensions themselves loading
1194	the extension.	1319	other extensions. For example, C<default,/background> will keep the
		1320	C<background> extension from being loaded when a background OSC sequence
		1321	is received.
		1322
		1323	The default set includes the C<selection>, C<option-popup>,
		1324	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1325	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1326	in B<keysym> resources.
		1327
		1328	Any extension such that a corresponding resource is given on the
		1329	command line is automatically appended to B<perl-ext>.
1195		1330
1196	Each extension is looked up in the library directories, loaded if	1331	Each extension is looked up in the library directories, loaded if
1197	necessary, and bound to the current terminal instance.	1332	necessary, and bound to the current terminal instance. When the library
		1333	search path contains multiple extension files of the same name, then the
		1334	first one found will be used.
1198		1335
1199	If both of these resources are the empty string, then the perl	1336	If both of these resources are the empty string, then the perl interpreter
1200	interpreter will not be initialized. The idea behind two options is that	1337	will not be initialized. The rationale for having two options is that
1201	B<perl-ext-common> will be used for extensions that should be available to	1338	B<perl-ext-common> will be used for extensions that should be available to
1202	all instances, while B<perl-ext> is used for specific instances.	1339	all instances, while B<perl-ext> is used for specific instances.
1203		1340
1204	=item B<perl-eval>: I<string>	1341	=item B<perl-eval>: I<string>
1205		1342
1206	Perl code to be evaluated when all extensions have been registered. See	1343	Perl code to be evaluated when all extensions have been registered. See
1207	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1344	the @@RXVT_NAME@@perl(3) manpage.
1208	will be ignored when running setuid/setgid.
1209		1345
1210	=item B<perl-lib>: I<path>	1346	=item B<perl-lib>: I<path>
1211		1347
1212	Colon-separated list of additional directories that hold extension	1348	Colon-separated list of additional directories that hold extension
1213	scripts. When looking for extensions specified by the C<perl> resource,	1349	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1214	@@RXVT_NAME@@ will first look in these directories and then in	1350	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1215	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1351	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1216	will be ignored when running setuid/setgid.
1217		1352
1218	See the @@RXVT_NAME@@perl(3) manpage.	1353	See the @@RXVT_NAME@@perl(3) manpage.
1219		1354
1220	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1355	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1221		1356
…		…
1225	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1360	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1226		1361
1227	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1362	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1228	for details.	1363	for details.
1229		1364
1230	=item B<searchable-scrollback:> I<keysym>	1365	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1231		1366
1232	Sets the hotkey that starts the incremental scrollback buffer search	1367	This resource is deprecated and will be removed. Use a B<keysym> resource
1233	(default: C<M-s>).	1368	instead, e.g.:
1234		1369
		1370	URxvt.keysym.M-s: searchable-scrollback:start
		1371
1235	=item B<urlLauncher>: I<string>	1372	=item B<url-launcher>: I<string>
1236		1373
1237	Specifies the program to be started with a URL argument. Used by the	1374	Specifies the program to be started with a URL argument. Used by the
1238	C<selection-popup> and C<matcher> perl extensions.	1375	C<selection-popup> and C<matcher> perl extensions.
1239		1376
1240	=item B<transient-for>: I<windowid>	1377	=item B<transient-for>: I<windowid>
…		…
1243		1380
1244	=item B<override-redirect>: I<boolean>	1381	=item B<override-redirect>: I<boolean>
1245		1382
1246	Compile I<frills>: Sets override-redirect for the terminal window, making	1383	Compile I<frills>: Sets override-redirect for the terminal window, making
1247	it almost invisible to window managers; option B<-override-redirect>.	1384	it almost invisible to window managers; option B<-override-redirect>.
		1385
		1386	=item B<iso14755:> I<boolean>
		1387
		1388	Turn on/off ISO 14755 (default enabled).
1248		1389
1249	=item B<iso14755_52:> I<boolean>	1390	=item B<iso14755_52:> I<boolean>
1250		1391
1251	Turn on/off ISO 14755 5.2 mode (default enabled).	1392	Turn on/off ISO 14755 5.2 mode (default enabled).
1252		1393
…		…
1280	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1421	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1281		1422
1282	The behaviour of text selection and insertion/pasting mechanism is similar	1423	The behaviour of text selection and insertion/pasting mechanism is similar
1283	to I<xterm>(1).	1424	to I<xterm>(1).
1284		1425
1285	=over 4	1426	=over
1286		1427
1287	=item B<Selecting>:	1428	=item B<Selecting>:
1288		1429
1289	Left click at the beginning of the region, drag to the end of the region	1430	Left click at the beginning of the region, drag to the end of the region
1290	and release; Right click to extend the marked region; Left double-click	1431	and release; Right click to extend the marked region; Left double-click
…		…
1305	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1446	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1306		1447
1307	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1448	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1308	inserted too.	1449	inserted too.
1309		1450
		1451	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1452	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1453	binding causes the value of the internal selection to be copied to the
		1454	CLIPBOARD selection, while the second binding causes the value of the
		1455	CLIPBOARD selection to be inserted.
		1456
1310	=back	1457	=back
1311		1458
1312	=head1 CHANGING FONTS	1459	=head1 CHANGING FONTS
1313		1460
1314	Changing fonts (or font sizes, respectively) via the keypad is not yet	1461	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1331	and character codes using the keyboard. It consists of 4 parts. The	1478	and character codes using the keyboard. It consists of 4 parts. The
1332	first part is available if rxvt-unicode has been compiled with	1479	first part is available if rxvt-unicode has been compiled with
1333	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1480	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1334	with C<--enable-iso14755>.	1481	with C<--enable-iso14755>.
1335		1482
1336	=over 4	1483	=over
1337		1484
1338	=item * 5.1: Basic method	1485	=item * 5.1: Basic method
1339		1486
1340	This allows you to enter unicode characters using their hexcode.	1487	This allows you to enter unicode characters using their hexcode.
1341		1488
…		…
1395	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1542	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1396	it can be seen via the I<who(1)> command, and can accept messages. To	1543	it can be seen via the I<who(1)> command, and can accept messages. To
1397	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1544	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1398	on some systems or setgid to root or to some other group on others.	1545	on some systems or setgid to root or to some other group on others.
1399		1546
1400	=head1 COLORS AND GRAPHICS	1547	=head1 COLOURS AND GRAPHICS
1401		1548
1402	In addition to the default foreground and background colours,	1549	In addition to the default foreground and background colours,
1403	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1550	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1404	high-intensity bold/blink versions of the same). Here is a list of the	1551	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1405	colours with their names.	1552	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1553	cube plus a 8 (24) colour greyscale ramp.
		1554
		1555	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1556	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1557	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1558	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1559	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1560	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1561	use many similar 24-bit colours. It's typically not a problem in common
		1562	scenarios.
		1563
		1564	Here is a list of the ANSI colours with their names.
1406		1565
1407	=begin table	1566	=begin table
1408		1567
1409	B<color0> (black) = Black	1568	B<color0> (black) = Black
1410	B<color1> (red) = Red3	1569	B<color1> (red) = Red3
…		…
1430	It is also possible to specify the colour values of B<foreground>,	1589	It is also possible to specify the colour values of B<foreground>,
1431	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1590	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1432	a number 0-15, as a convenient shorthand to reference the colour name of	1591	a number 0-15, as a convenient shorthand to reference the colour name of
1433	color0-color15.	1592	color0-color15.
1434		1593
1435	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1594	The following text gives values for the standard 88 colour mode (and
1436	additional 72 colours. The first 64 of those (with indices 16 to 79)	1595	values for the 256 colour mode in parentheses).
1437	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1438	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1439		1596
		1597	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1598
		1599	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1600	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1601
		1602	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1603	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1604	the RGB cube.
		1605
1440	Together, all those colours implement the 88 colour xterm colours. Only	1606	Together, all those colours implement the 88 (256) colour xterm
1441	the first 16 can be changed using resources currently, the rest can only	1607	colours. Only the first 16 can be changed using resources currently, the
1442	be changed via command sequences ("escape codes").	1608	rest can only be changed via command sequences ("escape codes").
		1609
		1610	Applications are advised to use terminfo or command sequences to discover
		1611	number and RGB values of all colours (yes, you can query this...).
1443		1612
1444	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1613	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1445	always swapping the foreground/background colours. This is in contrast to	1614	always swapping the foreground/background colours. This is in contrast to
1446	I<xterm>(1) where the colours are only swapped if they have not otherwise	1615	I<xterm>(1) where the colours are only swapped if they have not otherwise
1447	been specified. For example,	1616	been specified. For example,
1448		1617
1449	=over 4
1450
1451	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1618	@@RXVT_NAME@@ -fg Black -bg White -rv
1452		1619
1453	would yield White on Black, while on I<xterm>(1) it would yield Black	1620	would yield White on Black, while on I<xterm>(1) it would yield Black on
1454	on White.	1621	White.
1455
1456	=back
1457		1622
1458	=head2 ALPHA CHANNEL SUPPORT	1623	=head2 ALPHA CHANNEL SUPPORT
1459		1624
1460	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1625	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1461	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1626	their act together, rxvt-unicode will do its own alpha channel management:
1462	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1627
1463	in addition to the ones provided by X, where the additional A component	1628	You can prefix any colour with an opaqueness percentage enclosed in
		1629	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1630	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1631	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1632	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1633	is the recommended format to specify transparency values, and works with
		1634	all ways to specify a colour.
		1635
		1636	For complete control, rxvt-unicode also supports
		1637	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1638	specifications, where the additional C<aaaa> component specifies opacity
1464	specifies opacity (alpha) values. The minimum value of C<0> is completely	1639	(alpha) values. The minimum value of C<0000> is completely transparent,
1465	transparent). You can also prefix any color with C<[percent]>, where	1640	while C<ffff> is completely opaque). The two example colours from
1466	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1641	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1467	the color, where C<0> is completely transparent and C<100> is completelxy	1642	C<rgba:0000/ff00/0000/f332>.
1468	opaque.
1469		1643
1470	You probably need to specify B<"-depth 32">, too, and have the luck that	1644	You probably need to specify B<"-depth 32">, too, to force a visual with
1471	your X-server uses ARGB pixel layout, as X is far from just supporting	1645	alpha channels, and have the luck that your X-server uses ARGB pixel
1472	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1646	layout, as X is far from just supporting ARGB visuals out of the box, and
		1647	rxvt-unicode just fudges around.
1473		1648
1474	For example, the following selects an almost completely transparent red	1649	For example, the following selects an almost completely transparent black
1475	background, and an almost opaque pink foreground:	1650	background, and an almost opaque pink foreground:
1476		1651
1477	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1652	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1478		1653
1479	I<Please note that transparency of any kind if completely unsupported by	1654	When not using a background image, then the interpretation of the
1480	the author. Don't bug him with installation questions!>	1655	alpha channel is up to your compositing manager (most interpret it as
		1656	transparency of course).
		1657
		1658	When using a background pixmap or pseudo-transparency, then the background
		1659	colour will always behave as if it were completely transparent (so the
		1660	background image shows instead), regardless of how it was specified, while
		1661	other colours will either be transparent as specified (the background
		1662	image will show through) on servers supporting the RENDER extension, or
		1663	fully opaque on servers not supporting the RENDER EXTENSION.
		1664
		1665	Please note that due to bugs in Xft, specifying alpha values might result
		1666	in garbage being displayed when the X-server does not support the RENDER
		1667	extension.
1481		1668
1482	=head1 ENVIRONMENT	1669	=head1 ENVIRONMENT
1483		1670
1484	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1671	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1485		1672
1486	=over 4	1673	=over
1487		1674
1488	=item B<TERM>	1675	=item B<TERM>
1489		1676
1490	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1677	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1491	resources or on the command line.	1678	resources or on the command line.
…		…
1519	C<--with-terminfo=PATH>.	1706	C<--with-terminfo=PATH>.
1520		1707
1521	=item B<DISPLAY>	1708	=item B<DISPLAY>
1522		1709
1523	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1710	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1524	display in its child processes.	1711	display in its child processes if C<-display> isn't used to override. It
		1712	defaults to C<:0> if it doesn't exist.
1525		1713
1526	=item B<SHELL>	1714	=item B<SHELL>
1527		1715
1528	The shell to be used for command execution, defaults to C</bin/sh>.	1716	The shell to be used for command execution, defaults to C</bin/sh>.
1529		1717
1530	=item B<RXVT_SOCKET>	1718	=item B<RXVT_SOCKET> [I<sic>]
1531		1719
1532	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1720	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1533	@@RXVT_NAME@@d(1).	1721	@@RXVT_NAME@@d(1).
1534		1722
1535	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1723	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1724
		1725	=item B<URXVT_PERL_LIB>
		1726
		1727	Additional F<:>-separated library search path for perl extensions. Will be
		1728	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1729	directory.
		1730
		1731	=item B<URXVT_PERL_VERBOSITY>
		1732
		1733	See L<@@RXVT_NAME@@perl>(3).
1536		1734
1537	=item B<HOME>	1735	=item B<HOME>
1538		1736
1539	Used to locate the default directory for the unix domain socket for	1737	Used to locate the default directory for the unix domain socket for
1540	daemon communications and to locate various resource files (such as	1738	daemon communications and to locate various resource files (such as
1541	C<.Xdefaults>)	1739	C<.Xdefaults>)
1542		1740
1543	=item B<XAPPLRESDIR>	1741	=item B<XAPPLRESDIR>
1544		1742
1545	Directory where various X resource files are being located.	1743	Directory where application-specific X resource files are located.
1546		1744
1547	=item B<XENVIRONMENT>	1745	=item B<XENVIRONMENT>
1548		1746
1549	If set and accessible, gives the name of a X resource file to be loaded by	1747	If set and accessible, gives the name of a X resource file to be loaded by
1550	@@RXVT_NAME@@.	1748	@@RXVT_NAME@@.
1551		1749
1552	=back	1750	=back
1553		1751
1554	=head1 FILES	1752	=head1 FILES
1555		1753
1556	=over 4	1754	=over
1557		1755
1558	=item B</usr/lib/X11/rgb.txt>	1756	=item B</usr/lib/X11/rgb.txt>
1559		1757
1560	Color names.	1758	Colour names.
1561		1759
1562	=back	1760	=back
1563		1761
1564	=head1 SEE ALSO	1762	=head1 SEE ALSO
1565		1763
		1764	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1566	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1765	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1567		1766
1568	=head1 CURRENT PROJECT COORDINATOR	1767	=head1 CURRENT PROJECT COORDINATOR
1569		1768
1570	=over 4	1769	=over
1571		1770
1572	=item Project Coordinator	1771	=item Project Coordinator
1573		1772
1574	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1773	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1575		1774
1576	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1775	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1577		1776
1578	=back	1777	=back
1579		1778
1580	=head1 AUTHORS	1779	=head1 AUTHORS
1581		1780
1582	=over 4	1781	=over
1583		1782
1584	=item John Bovey	1783	=item John Bovey
1585		1784
1586	University of Kent, 1992, wrote the original Xvt.	1785	University of Kent, 1992, wrote the original Xvt.
1587		1786
1588	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1787	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1589		1788
1590	very heavily modified Xvt and came up with Rxvt	1789	very heavily modified Xvt and came up with Rxvt
1591		1790
1592	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1791	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1593		1792
1594	wrote the Greek Keyboard Input (no longer in code)	1793	wrote the Greek Keyboard Input (no longer in code)
1595		1794
1596	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1795	=item mj olesen <olesen@me.QueensU.CA>
1597		1796
1598	Wrote the menu system.	1797	Wrote the menu system.
1599		1798
1600	Project Coordinator (changes.txt 2.11 to 2.21)	1799	Project Coordinator (changes.txt 2.11 to 2.21)
1601		1800
1602	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1801	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1603		1802
1604	Project Coordinator (changes.txt 2.21a to 2.4.5)	1803	Project Coordinator (changes.txt 2.21a to 2.4.5)
1605		1804
1606	=item Geoff Wing L<< <gcw@pobox.com> >>	1805	=item Geoff Wing <gcw@pobox.com>
1607		1806
1608	Rewrote screen display and text selection routines.	1807	Rewrote screen display and text selection routines.
1609		1808
1610	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1809	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1611		1810
1612	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1811	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1613		1812
1614	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1813	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1615	extension, random hacks, numerous bugfixes and extensions.	1814	extension, random hacks, numerous bugfixes and extensions.
1616		1815
1617	Project Coordinator (Changes 1.0 -)	1816	Project Coordinator (Changes 1.0 -)
1618		1817
1619	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1818	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1620		1819
1621	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1820	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1622		1821
1623	=back	1822	=back
1624		1823

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.155 by ayin, Mon Dec 17 23:52:44 2007 UTC vs. Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.155 by ayin, Mon Dec 17 23:52:44 2007 UTC vs.
Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC