ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC

… …
84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1 84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85Orange'. 85Orange'.
86 86
87The following options are available: 87The following options are available:
88 88
89=over 4 89=over
90 90
91=item B<-help>, B<--help> 91=item B<-help>, B<--help>
92 92
93Print out a message describing available options. 93Print out a message describing available options.
94 94
… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
114possible visual ids) instead of the default, and also allocate a private
115colormap. All visual types except for DirectColor are supported.
116
111=item B<-geometry> I<geom> 117=item B<-geometry> I<geom>
112 118
113Window geometry (B<-g> still respected); resource B<geometry>. 119Window geometry (B<-g> still respected); resource B<geometry>.
114 120
115=item B<-rv>|B<+rv> 121=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 127Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 128
123=item B<-ss>|B<+ss> 129=item B<-ss>|B<+ss>
124 130
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 131Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133
134I<Please address all transparency related issues to Sasha Vasko at
135sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136 132
137=item B<-fade> I<number> 133=item B<-fade> I<number>
138 134
139Fade the text by the given percentage when focus is lost. Small values 135Fade the text by the given percentage when focus is lost. Small values
140fade a little only, 100 completely replaces all colours by the fade 136fade a little only, 100 completely replaces all colours by the fade
… …
143=item B<-fadecolor> I<colour> 139=item B<-fadecolor> I<colour>
144 140
145Fade to this colour when fading is used (see B<-fade>). The default colour 141Fade to this colour when fading is used (see B<-fade>). The default colour
146is opaque black. resource B<fadeColor>. 142is opaque black. resource B<fadeColor>.
147 143
148=item B<-tint> I<colour> 144=item B<-icon> I<file>
149 145
150Tint the transparent background pixmap with the given colour when 146Compile I<pixbuf>: Use the specified image as application icon. This
151transparency is enabled with B<-tr>. This only works for 147is used by many window managers, taskbars and pagers to represent the
152non-tiled backgrounds, currently. See also the B<-sh> option that can be 148application window; resource I<iconFile>.
153used to brighten or darken the image in addition to tinting it.
154Please note that certain tint colours can be applied on the server-side,
155thus yielding performance gain of two orders of magnitude. These colours are:
156blue, red, green, cyan, magenta, yellow, and those close to them. Also
157pure black and pure white colors essentially mean no tinting; resource
158I<tintColor>. Example:
159
160 @@RXVT_NAME@@ -tr -tint blue -sh 40
161
162=item B<-sh> I<number>
163
164Darken (0 .. 100) or lighten (100 .. 200) the transparent
165background image in addition to (or instead of) tinting it;
166resource I<shading>.
167
168=item B<-blt> I<string>
169
170Specify background blending type. If background pixmap is specified
171at the same time as transparency - such pixmap will be blended over
172transparency image, using method specified. Supported values are :
173B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178=item B<-blr> I<HxV>
179
180Apply Gaussian Blur with the specified radii to the transparent
181background image. If single number is specified - both vertical and
182horizontal radii are considered to be the same. Setting one of the
183radii to 1 and another to a large number creates interesting effects
184on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185resource I<blurRadius>.
186 149
187=item B<-bg> I<colour> 150=item B<-bg> I<colour>
188 151
189Window background colour; resource B<background>. 152Window background colour; resource B<background>.
190 153
191=item B<-fg> I<colour> 154=item B<-fg> I<colour>
192 155
193Window foreground colour; resource B<foreground>. 156Window foreground colour; resource B<foreground>.
194
195=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197Compile I<afterimage>: Specify image file for the background and also
198optionally specify its scaling with a geometry string. Note you may need to
199add quotes to avoid special shell interpretation of the C<;> in the
200command-line; for more details see resource B<backgroundPixmap>.
201 157
202=item B<-cr> I<colour> 158=item B<-cr> I<colour>
203 159
204The cursor colour; resource B<cursorColor>. 160The cursor colour; resource B<cursorColor>.
205 161
… …
264 220
265=item B<-ls>|B<+ls> 221=item B<-ls>|B<+ls>
266 222
267Start as a login-shell/sub-shell; resource B<loginShell>. 223Start as a login-shell/sub-shell; resource B<loginShell>.
268 224
225=item B<-mc> I<milliseconds>
226
227Specify the maximum time between multi-click selections.
228
269=item B<-ut>|B<+ut> 229=item B<-ut>|B<+ut>
270 230
271Compile I<utmp>: Inhibit/enable writing a utmp entry; resource 231Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
272B<utmpInhibit>. 232B<utmpInhibit>.
273 233
… …
315 275
316=item B<-bc>|B<+bc> 276=item B<-bc>|B<+bc>
317 277
318Blink the cursor; resource B<cursorBlink>. 278Blink the cursor; resource B<cursorBlink>.
319 279
280=item B<-uc>|B<+uc>
281
282Make the cursor underlined; resource B<cursorUnderline>.
283
320=item B<-iconic> 284=item B<-iconic>
321 285
322Start iconified, if the window manager supports that option. 286Start iconified, if the window manager supports that option.
323Alternative form is B<-ic>. 287Alternative form is B<-ic>.
324 288
… …
340 304
341=item B<-bl> 305=item B<-bl>
342 306
343Compile I<frills>: Set MWM hints to request a borderless window, i.e. 307Compile I<frills>: Set MWM hints to request a borderless window, i.e.
344if honoured by the WM, the rxvt-unicode window will not have window 308if honoured by the WM, the rxvt-unicode window will not have window
345decorations; resource B<borderLess>. 309decorations; resource B<borderLess>. If the window manager does not
310support MWM hints (e.g. kwin), enables override-redirect mode.
346 311
347=item B<-override-redirect> 312=item B<-override-redirect>
348 313
349Compile I<frills>: Sets override-redirect on the window; resource 314Compile I<frills>: Sets override-redirect on the window; resource
350B<override-redirect>. 315B<override-redirect>.
316
317=item B<-dockapp>
318
319Sets the initial state of the window to WithdrawnState, which makes
320window managers that support this extension treat it as a dockapp.
351 321
352=item B<-sbg> 322=item B<-sbg>
353 323
354Compile I<frills>: Disable the usage of the built-in block graphics/line 324Compile I<frills>: Disable the usage of the built-in block graphics/line
355drawing characters and just rely on what the specified fonts provide. Use 325drawing characters and just rely on what the specified fonts provide. Use
… …
359=item B<-lsp> I<number> 329=item B<-lsp> I<number>
360 330
361Compile I<frills>: Lines (pixel height) to insert between each row of 331Compile I<frills>: Lines (pixel height) to insert between each row of
362the display. Useful to work around font rendering problems; resource 332the display. Useful to work around font rendering problems; resource
363B<lineSpace>. 333B<lineSpace>.
334
335=item B<-letsp> I<number>
336
337Compile I<frills>: Amount to adjust the computed character width by
338to control overall letter spacing. Negative values will tighten up the
339letter spacing, positive values will space letters out more. Useful to
340work around odd font metrics; resource B<letterSpace>.
364 341
365=item B<-tn> I<termname> 342=item B<-tn> I<termname>
366 343
367This option specifies the name of the terminal type to be set in the 344This option specifies the name of the terminal type to be set in the
368B<TERM> environment variable. This terminal type must exist in the 345B<TERM> environment variable. This terminal type must exist in the
… …
403=item B<-pt> I<style> 380=item B<-pt> I<style>
404 381
405Compile I<XIM>: input style for input method; B<OverTheSpot>, 382Compile I<XIM>: input style for input method; B<OverTheSpot>,
406B<OffTheSpot>, B<Root>; resource B<preeditType>. 383B<OffTheSpot>, B<Root>; resource B<preeditType>.
407 384
385If the perl extension C<xim-onthespot> is used (which is the default),
386then additionally the C<OnTheSpot> preedit type is available.
387
408=item B<-im> I<text> 388=item B<-im> I<text>
409 389
410Compile I<XIM>: input method name. resource B<inputMethod>. 390Compile I<XIM>: input method name. resource B<inputMethod>.
411 391
412=item B<-imlocale> I<string> 392=item B<-imlocale> I<string>
… …
426Change the meaning of triple-click selection with the left mouse 406Change the meaning of triple-click selection with the left mouse
427button. Only effective when the original (non-perl) selection code is 407button. Only effective when the original (non-perl) selection code is
428in-use. Instead of selecting a full line it will extend the selection to 408in-use. Instead of selecting a full line it will extend the selection to
429the end of the logical line only. resource B<tripleclickwords>. 409the end of the logical line only. resource B<tripleclickwords>.
430 410
411=item B<-dpb>|B<+dpb>
412
413Compile frills: Disable (or enable) emitting bracketed paste mode
414sequences (default enabled). Bracketed paste mode allows programs
415to detect when something is pasted. Since more and more programs
416abuse this, these sequences can be disabled. The command sequences to
417enable and query paste mode will still work, but the actual bracket
418sequences will no longer be emitted. You can also toggle this from the
419ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
420
431=item B<-insecure> 421=item B<-insecure>
432 422
433Enable "insecure" mode, which currently enables most of the escape 423Enable "insecure" mode, which currently enables most of the escape
434sequences that echo strings. See the resource B<insecure> for more 424sequences that echo strings. See the resource B<insecure> for more
435info. 425info.
… …
447 437
448=item B<-ssr>|B<+ssr> 438=item B<-ssr>|B<+ssr>
449 439
450Turn on/off secondary screen scroll (default enabled); resource 440Turn on/off secondary screen scroll (default enabled); resource
451B<secondaryScroll>. 441B<secondaryScroll>.
442
443=item B<-rm> I<mode>
444
445Compile I<frills>: Sets long line rewrapping behaviour on window resizes
446to one of B<auto> (the default), B<always> or B<never>. The latter two
447modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
448is non-empty, and wings lines (acts like B<never>) otherwise; resource
449B<rewrapMode>.
452 450
453=item B<-hold>|B<+hold> 451=item B<-hold>|B<+hold>
454 452
455Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ 453Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
456will not immediately destroy its window when the program executed within 454will not immediately destroy its window when the program executed within
… …
535 533
536 # now communicate with rxvt 534 # now communicate with rxvt
537 my $slave = $pty->slave; 535 my $slave = $pty->slave;
538 while (<$slave>) { print $slave "got <$_>\n" } 536 while (<$slave>) { print $slave "got <$_>\n" }
539 537
538Note that, despite what the name might imply, the file descriptor does not
539need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
540domain or tcp socket). While tty operations cannot be done in this case,
541B<@@RXVT_NAME@@> can still be remote controlled with it:
542
543 use Socket;
544 use Fcntl;
545
546 socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
547 fcntl $slave, Fcntl::F_SETFD, 0;
548 system "exec @@RXVT_NAME|| -pty-fd " . (fileno $slave) . " &";
549 close $slave;
550
551 syswrite $URXVT, "Type a secret password: ";
552 my $secret = do { local $/ = "\r"; <$URXVT> };
553 print "Not so secret anymore: $secret\n";
554
540=item B<-pe> I<string> 555=item B<-pe> I<string>
541 556
542Comma-separated list of perl extension scripts to use (or not to use) in 557Comma-separated list of perl extension scripts to use (or not to use) in
543this terminal instance. See resource B<perl-ext> for details. 558this terminal instance. See resource B<perl-ext> for details.
544 559
… …
553You can set and change the resources using X11 tools like B<xrdb>. Many 568You can set and change the resources using X11 tools like B<xrdb>. Many
554distribution do also load settings from the B<~/.Xresources> file when X 569distribution do also load settings from the B<~/.Xresources> file when X
555starts. @@RXVT_NAME@@ will consult the following files/resources in order, 570starts. @@RXVT_NAME@@ will consult the following files/resources in order,
556with later settings overwriting earlier ones: 571with later settings overwriting earlier ones:
557 572
558 1. system-wide app-defaults file, either locale-dependent OR global
559 2. app-defaults file in $XAPPLRESDIR 573 1. app-defaults file in $XAPPLRESDIR
574 2. $HOME/.Xdefaults
560 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults 575 3. RESOURCE_MANAGER property on root-window of screen 0
561 4. SCREEN_RESOURCES for the current screen 576 4. SCREEN_RESOURCES property on root-window of the current screen
562 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename> 577 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
563 6. resources specified via -xrm on the commandline 578 6. resources specified via -xrm on the commandline
564 579
565Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class 580Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
566names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources 581names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
… …
571be used. Command-line arguments can be used to override resource 586be used. Command-line arguments can be used to override resource
572settings. The following resources are supported (you might want to 587settings. The following resources are supported (you might want to
573check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl 588check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
574extensions not documented here): 589extensions not documented here):
575 590
576=over 4 591=over
577 592
578=item B<depth:> I<bitdepth> 593=item B<depth:> I<bitdepth>
579 594
580Compile I<xft>: Attempt to find a visual with the given bit depth; 595Compile I<xft>: Attempt to find a visual with the given bit depth;
581option B<-depth>. 596option B<-depth>.
… …
607Use the specified colour for the colour value I<n>, where 0-7 622Use the specified colour for the colour value I<n>, where 0-7
608corresponds to low-intensity (normal) colours and 8-15 corresponds to 623corresponds to low-intensity (normal) colours and 8-15 corresponds to
609high-intensity (bold = bright foreground, blink = bright background) 624high-intensity (bold = bright foreground, blink = bright background)
610colours. The canonical names are as follows: 0=black, 1=red, 2=green, 625colours. The canonical names are as follows: 0=black, 1=red, 2=green,
6113=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour 6263=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
612names used are listed in the B<COLORS AND GRAPHICS> section. 627names used are listed in the B<COLOURS AND GRAPHICS> section.
613 628
614Colours higher than 15 cannot be set using resources (yet), but can be 629Colours higher than 15 cannot be set using resources (yet), but can be
615changed using an escape command (see @@RXVT_NAME@@(7)). 630changed using an escape command (see @@RXVT_NAME@@(7)).
616 631
617Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with 632Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
… …
628=item B<colorUL:> I<colour> 643=item B<colorUL:> I<colour>
629 644
630Use the specified colour to display underlined characters when the 645Use the specified colour to display underlined characters when the
631foreground colour is the default. 646foreground colour is the default.
632 647
633=item B<colorRV:> I<colour>
634
635Use the specified colour as the background for reverse video characters
636when OPTION_HC is disabled (--disable-frills).
637
638=item B<underlineColor:> I<colour> 648=item B<underlineColor:> I<colour>
639 649
640If set, use the specified colour as the colour for the underline 650If set, use the specified colour as the colour for the underline
641itself. If unset, use the foreground colour. 651itself. If unset, use the foreground colour.
652
653=item B<highlightColor:> I<colour>
654
655If set, use the specified colour as the background for highlighted
656characters. If unset, use reverse video.
657
658=item B<highlightTextColor:> I<colour>
659
660If set and highlightColor is set, use the specified colour as the
661foreground for highlighted characters.
642 662
643=item B<cursorColor:> I<colour> 663=item B<cursorColor:> I<colour>
644 664
645Use the specified colour for the cursor. The default is to use the 665Use the specified colour for the cursor. The default is to use the
646foreground colour; option B<-cr>. 666foreground colour; option B<-cr>.
… …
653 673
654=item B<reverseVideo:> I<boolean> 674=item B<reverseVideo:> I<boolean>
655 675
656B<True>: simulate reverse video by foreground and background colours; 676B<True>: simulate reverse video by foreground and background colours;
657option B<-rv>. B<False>: regular screen colours [default]; option 677option B<-rv>. B<False>: regular screen colours [default]; option
658B<+rv>. See note in B<COLORS AND GRAPHICS> section. 678B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
659 679
660=item B<jumpScroll:> I<boolean> 680=item B<jumpScroll:> I<boolean>
661 681
662B<True>: specify that jump scrolling should be used. When receiving lots 682B<True>: specify that jump scrolling should be used. When receiving lots
663of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines 683of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
… …
677 697
678B<False>: specify that everything is to be displayed, even 698B<False>: specify that everything is to be displayed, even
679if the refresh is too fast for the human eye to read anything (or the 699if the refresh is too fast for the human eye to read anything (or the
680monitor to display anything); option B<+ss>. 700monitor to display anything); option B<+ss>.
681 701
682=item B<transparent:> I<boolean>
683
684Turn on/off illusion of a transparent window background.
685
686B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
687future versions.
688
689I<Please address all transparency related issues to Sasha Vasko at
690sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
691
692=item B<fading:> I<number> 702=item B<fading:> I<number>
693 703
694Fade the text by the given percentage when focus is lost; option B<-fade>. 704Fade the text by the given percentage when focus is lost; option B<-fade>.
695 705
696=item B<fadeColor:> I<colour> 706=item B<fadeColor:> I<colour>
697 707
698Fade to this colour, when fading is used (see B<fading:>). The default 708Fade to this colour, when fading is used (see B<fading:>). The default
699colour is black; option B<-fadecolor>. 709colour is black; option B<-fadecolor>.
700 710
701=item B<tintColor:> I<colour> 711=item B<iconFile:> I<file>
702 712
703Tint the transparent background pixmap with the given colour; option 713Set the application icon pixmap; option B<-icon>.
704B<-tint>.
705
706=item B<shading:> I<number>
707
708Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
709in addition to tinting it; option B<-sh>.
710
711=item B<blendType:> I<string>
712
713Specify background blending type; option B<-blt>.
714
715=item B<blurRadius:> I<number>
716
717Apply Gaussian Blurr with the specified radius to the transparent
718background image; option B<-blr>.
719 714
720=item B<scrollColor:> I<colour> 715=item B<scrollColor:> I<colour>
721 716
722Use the specified colour for the scrollbar [default #B2B2B2]. 717Use the specified colour for the scrollbar [default #B2B2B2].
723 718
… …
728 723
729=item B<borderColor:> I<colour> 724=item B<borderColor:> I<colour>
730 725
731The colour of the border around the text area and between the scrollbar 726The colour of the border around the text area and between the scrollbar
732and the text. 727and the text.
733
734=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
735
736Use the specified image file for the background and also
737optionally specify its scaling with a geometry string B<WxH+X+Y>,
738(default C<0x0+50+50>) in which B<"W" / "H"> specify the
739horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
740centre (percent). A scale of 0 displays the image with tiling. A scale
741of 1 displays the image without any scaling. A scale of 2 to 9 specifies
742an integer number of images in that direction. No image will be magnified
743beyond 10 times its original size. The maximum permitted scale is 1000.
744Additional operations can be specified after colon B<:op1:op2...>.
745Supported operations are:
746
747 tile force background image to be tiled and not scaled. Equivalent to 0x0
748 propscale will scale image keeping proportions
749 auto will scale image to match window size. Equivalent to 100x100
750 hscale will scale image horizontally to the window size
751 vscale will scale image vertically to the window size
752 scale will scale image to match window size
753 root will tile image as if it was a root window background, auto-adjusting
754 whenever terminal window moves
755
756If used in conjunction with B<-tr> option, the specified pixmap will be
757blended over transparency image using either alpha-blending, or any
758other blending type, specified with B<-blt "type"> option.
759
760=item B<path:> I<path>
761
762Specify the colon-delimited search path for finding background image files.
763 728
764=item B<font:> I<fontlist> 729=item B<font:> I<fontlist>
765 730
766Select the fonts to be used. This is a comma separated list of font names 731Select the fonts to be used. This is a comma separated list of font names
767that are checked in order when trying to find glyphs for characters. The 732that are checked in order when trying to find glyphs for characters. The
… …
790it is named first) and thus defines the character cell grid to be 9 pixels 755it is named first) and thus defines the character cell grid to be 9 pixels
791wide and 15 pixels high. 756wide and 15 pixels high.
792 757
793The second font is just used to add additional unicode characters not in 758The second font is just used to add additional unicode characters not in
794the base font, likewise the third, which is unfortunately non-bold, but 759the base font, likewise the third, which is unfortunately non-bold, but
795the bold version of the font does contain less characters, so this is a 760the bold version of the font does contain fewer characters, so this is a
796useful supplement. 761useful supplement.
797 762
798The third font is an Xft font with aliasing turned off, and the characters 763The third font is an Xft font with aliasing turned off, and the characters
799are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font 764are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
800contains other characters, but we are not interested in them. 765contains other characters, but we are not interested in them.
… …
851=item B<urgentOnBell:> I<boolean> 816=item B<urgentOnBell:> I<boolean>
852 817
853B<True>: set the urgency hint for the wm on receipt of a bell character. 818B<True>: set the urgency hint for the wm on receipt of a bell character.
854B<False>: do not set the urgency hint [default]. 819B<False>: do not set the urgency hint [default].
855 820
821@@RXVT_NAME@@ resets the urgency hint on every focus change.
822
856=item B<visualBell:> I<boolean> 823=item B<visualBell:> I<boolean>
857 824
858B<True>: use visual bell on receipt of a bell character; option B<-vb>. 825B<True>: use visual bell on receipt of a bell character; option B<-vb>.
859B<False>: no visual bell [default]; option B<+vb>. 826B<False>: no visual bell [default]; option B<+vb>.
860 827
… …
862 829
863B<True>: start as a login shell by prepending a `-' to B<argv[0]> of 830B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
864the shell; option B<-ls>. B<False>: start as a normal sub-shell 831the shell; option B<-ls>. B<False>: start as a normal sub-shell
865[default]; option B<+ls>. 832[default]; option B<+ls>.
866 833
834=item B<multiClickTime:> I<number>
835
836Specify the maximum time in milliseconds between multi-click select
837events. The default is 500 milliseconds; option B<-mc>.
838
867=item B<utmpInhibit:> I<boolean> 839=item B<utmpInhibit:> I<boolean>
868 840
869B<True>: inhibit writing record into the system log file B<utmp>; 841B<True>: inhibit writing record into the system log file B<utmp>;
870option B<-ut>. B<False>: write record into the system log file B<utmp> 842option B<-ut>. B<False>: write record into the system log file B<utmp>
871[default]; option B<+ut>. 843[default]; option B<+ut>.
… …
888=item B<scrollstyle:> I<mode> 860=item B<scrollstyle:> I<mode>
889 861
890Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is 862Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
891the author's favourite. 863the author's favourite.
892 864
865=item B<thickness:> I<number>
866
867Set the scrollbar width in pixels.
868
893=item B<scrollBar:> I<boolean> 869=item B<scrollBar:> I<boolean>
894 870
895B<True>: enable the scrollbar [default]; option B<-sb>. B<False>: 871B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
896disable the scrollbar; option B<+sb>. 872disable the scrollbar; option B<+sb>.
897 873
… …
916B<False>: do not scroll to bottom when tty receives output; option 892B<False>: do not scroll to bottom when tty receives output; option
917B<+si>. 893B<+si>.
918 894
919=item B<scrollWithBuffer:> I<boolean> 895=item B<scrollWithBuffer:> I<boolean>
920 896
921B<True>: scroll with scrollback buffer when tty receives new lines (and 897B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
922B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll 898try to show the same lines) and B<scrollTtyOutput> is False; option
923with scrollback buffer when tty receives new lines; option B<+sw>. 899B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
900new lines; option B<+sw>.
924 901
925=item B<scrollTtyKeypress:> I<boolean> 902=item B<scrollTtyKeypress:> I<boolean>
926 903
927B<True>: scroll to bottom when a non-special key is pressed. Special keys 904B<True>: scroll to bottom when a non-special key is pressed. Special keys
928are those which are intercepted by rxvt-unicode for special handling and 905are those which are intercepted by rxvt-unicode for special handling and
929are not passed onto the shell; option B<-sk>. B<False>: do not scroll to 906are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
930bottom when a non-special key is pressed; option B<+sk>. 907bottom when a non-special key is pressed; option B<+sk>.
931 908
932=item B<saveLines:> I<number> 909=item B<saveLines:> I<number>
933 910
934Save I<number> lines in the scrollback buffer [default 64]. This 911Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
935resource is limited on most machines to 65535; option B<-sl>.
936 912
937=item B<internalBorder:> I<number> 913=item B<internalBorder:> I<number>
938 914
939Internal border of I<number> pixels. This resource is limited to 100; 915Internal border of I<number> pixels. This resource is limited to 100;
940option B<-b>. 916option B<-b>.
… …
984=item B<cursorBlink:> I<boolean> 960=item B<cursorBlink:> I<boolean>
985 961
986B<True>: blink the cursor. B<False>: do not blink the cursor [default]; 962B<True>: blink the cursor. B<False>: do not blink the cursor [default];
987option B<-bc>. 963option B<-bc>.
988 964
965=item B<cursorUnderline:> I<boolean>
966
967B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
968option B<-uc>.
969
989=item B<pointerBlank:> I<boolean> 970=item B<pointerBlank:> I<boolean>
990 971
991B<True>: blank the pointer when a key is pressed or after a set number 972B<True>: blank the pointer when a key is pressed or after a set number
992of seconds of inactivity. B<False>: the pointer is always visible 973of seconds of inactivity. B<False>: the pointer is always visible
993[default]. 974[default].
… …
998 979
999=item B<pointerColor2:> I<colour> 980=item B<pointerColor2:> I<colour>
1000 981
1001Mouse pointer background colour. 982Mouse pointer background colour.
1002 983
984=item B<pointerShape:> I<string>
985
986Compile I<frills>: Specifies the name of the mouse pointer shape
987[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
988file for possible values (omit the C<XC_> prefix).
989
1003=item B<pointerBlankDelay:> I<number> 990=item B<pointerBlankDelay:> I<number>
1004 991
1005Specifies number of seconds before blanking the pointer [default 2]. Use a 992Specifies number of seconds before blanking the pointer [default 2]. Use a
1006large number (e.g. C<987654321>) to effectively disable the timeout. 993large number (e.g. C<987654321>) to effectively disable the timeout.
1007 994
1008=item B<backspacekey:> I<string> 995=item B<backspacekey:> I<string>
1009 996
1010The string to send when the backspace key is pressed. If set to B<DEC> 997The string to send when the backspace key is pressed. If set to B<DEC>
1011or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace> 998or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1012(code 8) - which can be reversed with the appropriate DEC private mode 999(code 8) - which can be reversed with the appropriate DEC private mode
1013escape sequence. 1000escape sequence.
1014 1001
1015=item B<deletekey:> I<string> 1002=item B<deletekey:> I<string>
1016 1003
… …
1033 1020
1034B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> 1021B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
1035 1022
1036=item B<preeditType:> I<style> 1023=item B<preeditType:> I<style>
1037 1024
1038B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. 1025B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1039 1026
1040=item B<inputMethod:> I<name> 1027=item B<inputMethod:> I<name>
1041 1028
1042I<name> of inputMethod to use; option B<-im>. 1029I<name> of inputMethod to use; option B<-im>.
1043 1030
… …
1061 1048
1062Change the meaning of triple-click selection with the left mouse 1049Change the meaning of triple-click selection with the left mouse
1063button. Instead of selecting a full line it will extend the selection to 1050button. Instead of selecting a full line it will extend the selection to
1064the end of the logical line only; option B<-tcw>. 1051the end of the logical line only; option B<-tcw>.
1065 1052
1053=item B<disablePasteBrackets:> I<boolean>
1054
1055Prevent emission of paste bracket sequences; option B<-dpb>.
1056
1066=item B<insecure:> I<boolean> 1057=item B<insecure:> I<boolean>
1067 1058
1068Enables "insecure" mode. Rxvt-unicode offers some escape sequences that 1059Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1069echo arbitrary strings like the icon name or the locale. This could be 1060echo arbitrary strings like the icon name or the locale. This could be
1070abused if somebody gets 8-bit-clean access to your display, whether 1061abused if somebody gets 8-bit-clean access to your display, whether
1071through a mail client displaying mail bodies unfiltered or through 1062through a mail client displaying mail bodies unfiltered or through
1072write(1) or any other means. Therefore, these sequences are disabled by 1063write(1) or any other means. Therefore, these sequences are disabled by
1073default. (Note that many other terminals, including xterm, have these 1064default. (Note that many other terminals, including xterm, have these
… …
1091 1082
1092=item B<secondaryScreen:> I<boolean> 1083=item B<secondaryScreen:> I<boolean>
1093 1084
1094Turn on/off secondary screen (default enabled). 1085Turn on/off secondary screen (default enabled).
1095 1086
1087=item B<rewrapMode:> I<mode>
1088
1089Sets long line rewrap behaviour on window resize to one of B<auto>
1090(default), B<always> or B<never>.
1091
1096=item B<secondaryScroll:> I<boolean> 1092=item B<secondaryScroll:> I<boolean>
1097 1093
1098Turn on/off secondary screen scroll (default enabled). If this 1094Turn on/off secondary screen scroll (default enabled). If this
1099option is enabled, scrolls on the secondary screen will change the 1095option is enabled, scrolls on the secondary screen will change the
1100scrollback buffer and, when secondaryScreen is off, switching 1096scrollback buffer and, when secondaryScreen is off, switching
… …
1112Sets the working directory for the shell (or the command specified via 1108Sets the working directory for the shell (or the command specified via
1113B<-e>). The I<path> must be an absolute path and it must exist for 1109B<-e>). The I<path> must be an absolute path and it must exist for
1114@@RXVT_NAME@@ to start. If it isn't specified then the current working 1110@@RXVT_NAME@@ to start. If it isn't specified then the current working
1115directory will be used; option B<-cd>. 1111directory will be used; option B<-cd>.
1116 1112
1117=item B<keysym.>I<sym>: I<string> 1113=item B<keysym.>I<sym>: I<action>
1118 1114
1119Compile I<frills>: Associate I<string> with keysym I<sym>. The 1115Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1120intervening resource name B<keysym.> cannot be omitted. 1116resource name B<keysym.> cannot be omitted.
1121 1117
1122The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1118Using this resource, you can map key combinations such as
1123any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1119C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1124B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1120string than would normally result from that combination, making the
1125and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1121terminal scroll up or down the way you want it, or any other thing an
1126B<2>, B<3>, B<4>, B<5>. 1122extension might provide.
1123
1124The key combination that triggers the action, I<sym>, has the following format:
1125
1126 (modifiers-)key
1127
1128Where I<modifiers> can be any combination of the following full or
1129abbreviated modifier names:
1130
1131=begin table
1132
1133 B<ISOLevel3> B<I>
1134 B<AppKeypad> B<K>
1135 B<Control> B<C>
1136 B<NumLock> B<N>
1137 B<Shift> B<S>
1138 B<Meta> B<M> I<or> B<A>
1139 B<Lock> B<L>
1140 B<Mod1> B<1>
1141 B<Mod2> B<2>
1142 B<Mod3> B<3>
1143 B<Mod4> B<4>
1144 B<Mod5> B<5>
1145
1146=end table
1127 1147
1128The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1148The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1129whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1149whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1130keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1150keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1131current application keymap mode state. 1151current application keymap mode state.
1132 1152
1133The spellings of I<key> can be obtained by using B<xev>(1) command or 1153Due the the large number of modifier combinations, a key mapping will
1134searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1154match if I<at least> the specified identifiers are being set, and no other
1155key mappings with those and more bits are being defined. That means that
1156defining a mapping for C<a> will automatically provide definitions for
1157C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1158themselves. See the C<builtin:> action, below, for a way to work around
1159this when this is a problem.
1160
1161The spelling of I<key> depends on your implementation of X. An easy way to
1162find a key name is to use the B<xev>(1) command. You can find a list by
1163looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1135omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1164the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1136keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1165value (B<0x0000 - 0xFFFF>).
1137performed in an exact manner; however, the closest match is assured.
1138 1166
1139I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1167As with any resource value, the I<action> string may contain backslash
1168escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1140number), see RESOURCES in C<man 7 X> for futher details. 1169number), see RESOURCES in C<man 7 X> for further details.
1141 1170
1142You can define a range of keysyms in one shot by providing a I<string> 1171An action starts with an action prefix that selects a certain type
1143with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1172of action, followed by a colon. An action string without colons is
1173interpreted as a literal string to pass to the tty (as if it was
1174prefixed with C<string:>).
1175
1176The following action prefixes are known - extensions can provide
1177additional prefixes:
1178
1179=over
1180
1181=item string:STRING
1182
1183If the I<action> starts with C<string:> (or otherwise contains no colons),
1184then the remaining C<STRING> will be passed to the program running in the
1185terminal. For example, you could replace whatever Shift-Tab outputs by the
1186string C<echo rm -rf /> followed by a newline:
1187
1188 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1189
1190This could in theory be used to completely redefine your keymap.
1191
1192In addition, for actions of this type, you can define a range of
1193keysyms in one shot by loading the C<keysym-list> perl extension and
1194providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1144should be a character not used by the strings. 1195the delimiter `/' should be a character not used by the strings.
1145 1196
1146Its usage can be demonstrated by an example: 1197Its usage can be demonstrated by an example:
1147 1198
1148 URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|> 1199 URxvt.keysym.M-C-0x61: list|\033<|abc|>
1149 1200
1150The above line is equivalent to the following three lines: 1201The above line is equivalent to the following three lines:
1151 1202
1152 URxvt.keysym.Meta-Control-0x61: \033<M-C-a> 1203 URxvt.keysym.Meta-Control-0x61: string:\033<a>
1153 URxvt.keysym.Meta-Control-0x62: \033<M-C-b> 1204 URxvt.keysym.Meta-Control-0x62: string:\033<b>
1154 URxvt.keysym.Meta-Control-0x63: \033<M-C-c> 1205 URxvt.keysym.Meta-Control-0x63: string:\033<c>
1155 1206
1207=item command:STRING
1208
1156If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1209If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1157is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1210is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1211the opposite of C<string:> - instead of sending it to the program running
1212in the terminal, it will be treated as if it were program output). This is
1213most useful to feed command sequences into @@RXVT_NAME@@.
1214
1158example the following means "change the current locale to C<zh_CN.GBK> 1215For example the following means "change the current locale to C<zh_CN.GBK>
1159when Control-Meta-c is being pressed": 1216when Control-Meta-c is being pressed":
1160 1217
1161 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1218 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1162 1219
1163If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1220The following example will map Control-Meta-1 and Control-Meta-2 to
1164is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3) 1221the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1165manpage. For example, the F<selection> extension (activated via 1222font-switching at runtime:
1166C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1167 1223
1168 URxvt.keysym.M-C-c: perl:selection:rot13 1224 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1225 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1169 1226
1170Due the the large number of modifier combinations, a defined key mapping 1227Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1171will match if at I<at least> the specified identifiers are being set, and 1228info):
1172no other key mappings with those and more bits are being defined. That
1173means that defining a key map for C<a> will automatically provide
1174definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1175mappings themselves.
1176 1229
1177Unfortunately, this will override built-in key mappings. For example 1230 URxvt.keysym.M-C-3: command:\033[8;25;80t
1231 URxvt.keysym.M-C-4: command:\033[8;48;110t
1232
1233=item builtin:
1234
1235The builtin action is the action that @@RXVT_NAME@@ would execute if no
1236key binding existed for the key combination. The obvious use is to undo
1237the effect of existing bindings. The not so obvious use is to reinstate
1238bindings when another binding overrides too many modifiers.
1239
1178if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1240For example if you overwrite the C<Insert> key you will disable
1179C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1241@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1180user-defined keymap using the C<builtin:> replacement: 1242"holes" into the user-defined keymap using the C<builtin:> replacement:
1181 1243
1182 URxvt.keysym.Insert: <my insert key sequence> 1244 URxvt.keysym.Insert: <my insert key sequence>
1183 URxvt.keysym.S-Insert: builtin: 1245 URxvt.keysym.S-Insert: builtin:
1184 1246
1185The first line defines a mapping for C<Insert> and I<any> combination 1247The first line defines a mapping for C<Insert> and I<any> combination
1186of modifiers. The second line re-establishes the default mapping for 1248of modifiers. The second line re-establishes the default mapping for
1187C<Shift-Insert>. 1249C<Shift-Insert>.
1188 1250
1189The following example will map Control-Meta-1 and Control-Meta-2 to 1251=item builtin-string:
1190the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1191font-switching at runtime:
1192 1252
1193 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1253This action is mainly useful to restore string mappings for keys that
1194 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1254have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1255difficult to explain - basically, this action will send the string to the
1256application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1257action for it.
1195 1258
1196Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1259An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1197info): 1260selection when you press C<Shift-Insert>. With the following bindings, it
1261would instead emit the (undocumented, but what applications running in the
1262terminal might expect) sequence C<ESC [ 2 $> instead:
1198 1263
1199 URxvt.keysym.M-C-3: command:\033[8;25;80t 1264 URxvt.keysym.S-Insert: builtin-string:
1200 URxvt.keysym.M-C-4: command:\033[8;48;110t 1265 URxvt.keysym.C-S-Insert: builtin:
1266
1267The first line disables the paste functionality for that key
1268combination, and the second reinstates the default behaviour for
1269C<Control-Shift-Insert>, which would otherwise be overridden.
1270
1271Similarly, to let applications gain access to the C<C-M-c> (copy to
1272clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1273this:
1274
1275 URxvt.keysym.C-M-c: builtin-string:
1276 URxvt.keysym.C-M-v: builtin-string:
1277
1278=item EXTENSION:STRING
1279
1280An action of this form invokes the action B<STRING>, if any, provided
1281by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
1282be loaded automatically if necessary.
1283
1284Not all extensions define actions, but popular extensions that do
1285include the I<selection> and I<matcher> extensions (documented in their
1286own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1287respectively).
1288
1289From the silly examples department, this will rot13-"encrypt"
1290@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1291keyboards:
1292
1293 URxvt.keysym.M-C-c: selection:rot13
1294
1295=item perl:STRING *DEPRECATED*
1296
1297This is a deprecated way of invoking commands provided by perl
1298extensions. It is still supported, but should not be used anymore.
1299
1300=back
1201 1301
1202=item B<perl-ext-common>: I<string> 1302=item B<perl-ext-common>: I<string>
1203 1303
1204=item B<perl-ext>: I<string> 1304=item B<perl-ext>: I<string>
1205 1305
1206Comma-separated list(s) of perl extension scripts (default: C<default>) to 1306Comma-separated list(s) of perl extension scripts (default: C<default>) to
1207use in this terminal instance; option B<-pe>. 1307use in this terminal instance; option B<-pe>.
1208 1308
1209Extension names can be prefixed with a C<-> sign to prohibit using 1309Extension names can be prefixed with a C<-> sign to remove them again, in
1210them. This can be useful to selectively disable some extensions loaded 1310case they had been specified earlier. This can be useful to selectively
1211by default, or specified via the C<perl-ext-common> resource. For 1311disable some extensions loaded by default, or specified via the
1212example, C<default,-selection> will use all the default extension except 1312C<perl-ext-common> resource. For example, C<default,-selection> will use
1213C<selection>. 1313all the default extensions except C<selection>.
1214 1314
1215Extension names can also be followed by an argument in angle brackets 1315To prohibit autoloading of extensions, you can prefix them with C</>,
1216(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1316which will make urxvt refuse to automatically load them (this can be
1217searchable scrollback to Alt/Meta-s). Mentioning the same extension 1317overriden, however, by specifying the extension name again without a
1218multiple times with different arguments will pass multiple arguments to 1318prefix, though). This does not prohibit extensions themselves loading
1219the extension. 1319other extensions. For example, C<default,/background> will keep the
1320C<background> extension from being loaded when a background OSC sequence
1321is received.
1322
1323The default set includes the C<selection>, C<option-popup>,
1324C<selection-popup>, C<readline>, C<searchable-scrollback> and
1325C<confirm-paste> extensions, as well as any extensions which are mentioned
1326in B<keysym> resources.
1327
1328Any extension such that a corresponding resource is given on the
1329command line is automatically appended to B<perl-ext>.
1220 1330
1221Each extension is looked up in the library directories, loaded if 1331Each extension is looked up in the library directories, loaded if
1222necessary, and bound to the current terminal instance. 1332necessary, and bound to the current terminal instance. When the library
1333search path contains multiple extension files of the same name, then the
1334first one found will be used.
1223 1335
1224If both of these resources are the empty string, then the perl 1336If both of these resources are the empty string, then the perl interpreter
1225interpreter will not be initialized. The idea behind two options is that 1337will not be initialized. The rationale for having two options is that
1226B<perl-ext-common> will be used for extensions that should be available to 1338B<perl-ext-common> will be used for extensions that should be available to
1227all instances, while B<perl-ext> is used for specific instances. 1339all instances, while B<perl-ext> is used for specific instances.
1228 1340
1229=item B<perl-eval>: I<string> 1341=item B<perl-eval>: I<string>
1230 1342
1231Perl code to be evaluated when all extensions have been registered. See 1343Perl code to be evaluated when all extensions have been registered. See
1232the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource 1344the @@RXVT_NAME@@perl(3) manpage.
1233will be ignored when running setuid/setgid.
1234 1345
1235=item B<perl-lib>: I<path> 1346=item B<perl-lib>: I<path>
1236 1347
1237Colon-separated list of additional directories that hold extension 1348Colon-separated list of additional directories that hold extension
1238scripts. When looking for extensions specified by the C<perl> resource, 1349scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239@@RXVT_NAME@@ will first look in these directories and then in 1350in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource 1351lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241will be ignored when running setuid/setgid.
1242 1352
1243See the @@RXVT_NAME@@perl(3) manpage. 1353See the @@RXVT_NAME@@perl(3) manpage.
1244 1354
1245=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1355=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1246 1356
… …
1250=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1360=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1251 1361
1252Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1362Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1253for details. 1363for details.
1254 1364
1255=item B<searchable-scrollback:> I<keysym> 1365=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1256 1366
1257Sets the hotkey that starts the incremental scrollback buffer search 1367This resource is deprecated and will be removed. Use a B<keysym> resource
1258(default: C<M-s>). 1368instead, e.g.:
1259 1369
1370 URxvt.keysym.M-s: searchable-scrollback:start
1371
1260=item B<urlLauncher>: I<string> 1372=item B<url-launcher>: I<string>
1261 1373
1262Specifies the program to be started with a URL argument. Used by the 1374Specifies the program to be started with a URL argument. Used by the
1263C<selection-popup> and C<matcher> perl extensions. 1375C<selection-popup> and C<matcher> perl extensions.
1264 1376
1265=item B<transient-for>: I<windowid> 1377=item B<transient-for>: I<windowid>
… …
1268 1380
1269=item B<override-redirect>: I<boolean> 1381=item B<override-redirect>: I<boolean>
1270 1382
1271Compile I<frills>: Sets override-redirect for the terminal window, making 1383Compile I<frills>: Sets override-redirect for the terminal window, making
1272it almost invisible to window managers; option B<-override-redirect>. 1384it almost invisible to window managers; option B<-override-redirect>.
1385
1386=item B<iso14755:> I<boolean>
1387
1388Turn on/off ISO 14755 (default enabled).
1273 1389
1274=item B<iso14755_52:> I<boolean> 1390=item B<iso14755_52:> I<boolean>
1275 1391
1276Turn on/off ISO 14755 5.2 mode (default enabled). 1392Turn on/off ISO 14755 5.2 mode (default enabled).
1277 1393
… …
1305=head1 THE SELECTION: SELECTING AND PASTING TEXT 1421=head1 THE SELECTION: SELECTING AND PASTING TEXT
1306 1422
1307The behaviour of text selection and insertion/pasting mechanism is similar 1423The behaviour of text selection and insertion/pasting mechanism is similar
1308to I<xterm>(1). 1424to I<xterm>(1).
1309 1425
1310=over 4 1426=over
1311 1427
1312=item B<Selecting>: 1428=item B<Selecting>:
1313 1429
1314Left click at the beginning of the region, drag to the end of the region 1430Left click at the beginning of the region, drag to the end of the region
1315and release; Right click to extend the marked region; Left double-click 1431and release; Right click to extend the marked region; Left double-click
… …
1330B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1446B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1331 1447
1332Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1448Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1333inserted too. 1449inserted too.
1334 1450
1451rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1452<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1453binding causes the value of the internal selection to be copied to the
1454CLIPBOARD selection, while the second binding causes the value of the
1455CLIPBOARD selection to be inserted.
1456
1335=back 1457=back
1336 1458
1337=head1 CHANGING FONTS 1459=head1 CHANGING FONTS
1338 1460
1339Changing fonts (or font sizes, respectively) via the keypad is not yet 1461Changing fonts (or font sizes, respectively) via the keypad is not yet
… …
1356and character codes using the keyboard. It consists of 4 parts. The 1478and character codes using the keyboard. It consists of 4 parts. The
1357first part is available if rxvt-unicode has been compiled with 1479first part is available if rxvt-unicode has been compiled with
1358C<--enable-frills>, the rest is available when rxvt-unicode was compiled 1480C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1359with C<--enable-iso14755>. 1481with C<--enable-iso14755>.
1360 1482
1361=over 4 1483=over
1362 1484
1363=item * 5.1: Basic method 1485=item * 5.1: Basic method
1364 1486
1365This allows you to enter unicode characters using their hexcode. 1487This allows you to enter unicode characters using their hexcode.
1366 1488
… …
1420B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that 1542B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1421it can be seen via the I<who(1)> command, and can accept messages. To 1543it can be seen via the I<who(1)> command, and can accept messages. To
1422allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root 1544allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1423on some systems or setgid to root or to some other group on others. 1545on some systems or setgid to root or to some other group on others.
1424 1546
1425=head1 COLORS AND GRAPHICS 1547=head1 COLOURS AND GRAPHICS
1426 1548
1427In addition to the default foreground and background colours, 1549In addition to the default foreground and background colours,
1428B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus 1550B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1429high-intensity bold/blink versions of the same). Here is a list of the 1551high-intensity (potentially bold/blink) versions of the same, and 72 (or
1430colours with their names. 1552240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1553cube plus a 8 (24) colour greyscale ramp.
1554
1555B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
1556C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
1557number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
1558colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
155924-bit colour space. When indexing collisions happen, the nearest old colour in
1560the cube will be adapted to the new 24-bit RGB colour. That means one cannot
1561use many similar 24-bit colours. It's typically not a problem in common
1562scenarios.
1563
1564Here is a list of the ANSI colours with their names.
1431 1565
1432=begin table 1566=begin table
1433 1567
1434 B<color0> (black) = Black 1568 B<color0> (black) = Black
1435 B<color1> (red) = Red3 1569 B<color1> (red) = Red3
… …
1455It is also possible to specify the colour values of B<foreground>, 1589It is also possible to specify the colour values of B<foreground>,
1456B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as 1590B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1457a number 0-15, as a convenient shorthand to reference the colour name of 1591a number 0-15, as a convenient shorthand to reference the colour name of
1458color0-color15. 1592color0-color15.
1459 1593
1460In addition to the colours defined above, @@RXVT_NAME@@ offers an 1594The following text gives values for the standard 88 colour mode (and
1461additional 72 colours. The first 64 of those (with indices 16 to 79) 1595values for the 256 colour mode in parentheses).
1462consist of a 4*4*4 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
146316>), followed by 8 additional shades of gray (with indices 80 to 87).
1464 1596
1597The RGB cube uses indices 16..79 (16..231) using the following formulas:
1598
1599 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1600 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1601
1602The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1603steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1604the RGB cube.
1605
1465Together, all those colours implement the 88 colour xterm colours. Only 1606Together, all those colours implement the 88 (256) colour xterm
1466the first 16 can be changed using resources currently, the rest can only 1607colours. Only the first 16 can be changed using resources currently, the
1467be changed via command sequences ("escape codes"). 1608rest can only be changed via command sequences ("escape codes").
1609
1610Applications are advised to use terminfo or command sequences to discover
1611number and RGB values of all colours (yes, you can query this...).
1468 1612
1469Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by 1613Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1470always swapping the foreground/background colours. This is in contrast to 1614always swapping the foreground/background colours. This is in contrast to
1471I<xterm>(1) where the colours are only swapped if they have not otherwise 1615I<xterm>(1) where the colours are only swapped if they have not otherwise
1472been specified. For example, 1616been specified. For example,
1473 1617
1474=over 4
1475
1476=item B<@@RXVT_NAME@@ -fg Black -bg White -rv> 1618 @@RXVT_NAME@@ -fg Black -bg White -rv
1477 1619
1478would yield White on Black, while on I<xterm>(1) it would yield Black 1620would yield White on Black, while on I<xterm>(1) it would yield Black on
1479on White. 1621White.
1480
1481=back
1482 1622
1483=head2 ALPHA CHANNEL SUPPORT 1623=head2 ALPHA CHANNEL SUPPORT
1484 1624
1485If Xft support has been compiled in and as long as Xft/Xrender/X don't get 1625If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1486their act together, rxvt-unicode will do it's own alpha channel management: 1626their act together, rxvt-unicode will do its own alpha channel management:
1487 1627
1488You can prefix any color with an opaquenes percentage enclosed in 1628You can prefix any colour with an opaqueness percentage enclosed in
1489brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage 1629brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1490(0-100) that specifies the opacity of the color, where C<0> is completely 1630(0-100) that specifies the opacity of the colour, where C<0> is completely
1491transparent and C<100> is completely opaque. For example, C<[50]red> is a 1631transparent and C<100> is completely opaque. For example, C<[50]red> is a
1492half-transparent red, while C<[95]#00ff00> is an almost opaque green. This 1632half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1493is the recommended format to specify transparency values, and works with 1633is the recommended format to specify transparency values, and works with
1494all ways to specify a colour. 1634all ways to specify a colour.
1495 1635
… …
1528 1668
1529=head1 ENVIRONMENT 1669=head1 ENVIRONMENT
1530 1670
1531B<@@RXVT_NAME@@> sets and/or uses the following environment variables: 1671B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1532 1672
1533=over 4 1673=over
1534 1674
1535=item B<TERM> 1675=item B<TERM>
1536 1676
1537Normally set to C<rxvt-unicode>, unless overwritten at configure time, via 1677Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1538resources or on the command line. 1678resources or on the command line.
… …
1573 1713
1574=item B<SHELL> 1714=item B<SHELL>
1575 1715
1576The shell to be used for command execution, defaults to C</bin/sh>. 1716The shell to be used for command execution, defaults to C</bin/sh>.
1577 1717
1578=item B<RXVT_SOCKET> 1718=item B<RXVT_SOCKET> [I<sic>]
1579 1719
1580The unix domain socket path used by @@RXVT_NAME@@c(1) and 1720The unix domain socket path used by @@RXVT_NAME@@c(1) and
1581@@RXVT_NAME@@d(1). 1721@@RXVT_NAME@@d(1).
1582 1722
1583Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>. 1723Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1724
1725=item B<URXVT_PERL_LIB>
1726
1727Additional F<:>-separated library search path for perl extensions. Will be
1728searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1729directory.
1730
1731=item B<URXVT_PERL_VERBOSITY>
1732
1733See L<@@RXVT_NAME@@perl>(3).
1584 1734
1585=item B<HOME> 1735=item B<HOME>
1586 1736
1587Used to locate the default directory for the unix domain socket for 1737Used to locate the default directory for the unix domain socket for
1588daemon communications and to locate various resource files (such as 1738daemon communications and to locate various resource files (such as
1589C<.Xdefaults>) 1739C<.Xdefaults>)
1590 1740
1591=item B<XAPPLRESDIR> 1741=item B<XAPPLRESDIR>
1592 1742
1593Directory where various X resource files are being located. 1743Directory where application-specific X resource files are located.
1594 1744
1595=item B<XENVIRONMENT> 1745=item B<XENVIRONMENT>
1596 1746
1597If set and accessible, gives the name of a X resource file to be loaded by 1747If set and accessible, gives the name of a X resource file to be loaded by
1598@@RXVT_NAME@@. 1748@@RXVT_NAME@@.
1599 1749
1600=back 1750=back
1601 1751
1602=head1 FILES 1752=head1 FILES
1603 1753
1604=over 4 1754=over
1605 1755
1606=item B</usr/lib/X11/rgb.txt> 1756=item B</usr/lib/X11/rgb.txt>
1607 1757
1608Color names. 1758Colour names.
1609 1759
1610=back 1760=back
1611 1761
1612=head1 SEE ALSO 1762=head1 SEE ALSO
1613 1763
1764@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1614@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1765@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1615 1766
1616=head1 CURRENT PROJECT COORDINATOR 1767=head1 CURRENT PROJECT COORDINATOR
1617 1768
1618=over 4 1769=over
1619 1770
1620=item Project Coordinator 1771=item Project Coordinator
1621 1772
1622Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1773Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1623 1774
1624L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1775L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1625 1776
1626=back 1777=back
1627 1778
1628=head1 AUTHORS 1779=head1 AUTHORS
1629 1780
1630=over 4 1781=over
1631 1782
1632=item John Bovey 1783=item John Bovey
1633 1784
1634University of Kent, 1992, wrote the original Xvt. 1785University of Kent, 1992, wrote the original Xvt.
1635 1786
1636=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1787=item Rob Nation <nation@rocket.sanders.lockheed.com>
1637 1788
1638very heavily modified Xvt and came up with Rxvt 1789very heavily modified Xvt and came up with Rxvt
1639 1790
1640=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1791=item Angelo Haritsis <ah@doc.ic.ac.uk>
1641 1792
1642wrote the Greek Keyboard Input (no longer in code) 1793wrote the Greek Keyboard Input (no longer in code)
1643 1794
1644=item mj olesen L<< <olesen@me.QueensU.CA> >> 1795=item mj olesen <olesen@me.QueensU.CA>
1645 1796
1646Wrote the menu system. 1797Wrote the menu system.
1647 1798
1648Project Coordinator (changes.txt 2.11 to 2.21) 1799Project Coordinator (changes.txt 2.11 to 2.21)
1649 1800
1650=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1801=item Oezguer Kesim <kesim@math.fu-berlin.de>
1651 1802
1652Project Coordinator (changes.txt 2.21a to 2.4.5) 1803Project Coordinator (changes.txt 2.21a to 2.4.5)
1653 1804
1654=item Geoff Wing L<< <gcw@pobox.com> >> 1805=item Geoff Wing <gcw@pobox.com>
1655 1806
1656Rewrote screen display and text selection routines. 1807Rewrote screen display and text selection routines.
1657 1808
1658Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1809Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1659 1810
1660=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1811=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1661 1812
1662Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1813Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1663extension, random hacks, numerous bugfixes and extensions. 1814extension, random hacks, numerous bugfixes and extensions.
1664 1815
1665Project Coordinator (Changes 1.0 -) 1816Project Coordinator (Changes 1.0 -)
1666 1817
1667=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1818=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1668 1819
1669Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing. 1820pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1670 1821
1671=back 1822=back
1672 1823

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines