ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.210 by sf-exg, Mon Dec 26 15:20:58 2011 UTC vs.
Revision 1.257 by root, Mon Nov 22 17:01:05 2021 UTC

… …
84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1 84far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85Orange'. 85Orange'.
86 86
87The following options are available: 87The following options are available:
88 88
89=over 4 89=over
90 90
91=item B<-help>, B<--help> 91=item B<-help>, B<--help>
92 92
93Print out a message describing available options. 93Print out a message describing available options.
94 94
… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
114possible visual ids) instead of the default, and also allocate a private
115colormap. All visual types except for DirectColor are supported.
116
111=item B<-geometry> I<geom> 117=item B<-geometry> I<geom>
112 118
113Window geometry (B<-g> still respected); resource B<geometry>. 119Window geometry (B<-g> still respected); resource B<geometry>.
114 120
115=item B<-rv>|B<+rv> 121=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 127Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 128
123=item B<-ss>|B<+ss> 129=item B<-ss>|B<+ss>
124 130
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 131Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133 132
134=item B<-fade> I<number> 133=item B<-fade> I<number>
135 134
136Fade the text by the given percentage when focus is lost. Small values 135Fade the text by the given percentage when focus is lost. Small values
137fade a little only, 100 completely replaces all colours by the fade 136fade a little only, 100 completely replaces all colours by the fade
… …
140=item B<-fadecolor> I<colour> 139=item B<-fadecolor> I<colour>
141 140
142Fade to this colour when fading is used (see B<-fade>). The default colour 141Fade to this colour when fading is used (see B<-fade>). The default colour
143is opaque black. resource B<fadeColor>. 142is opaque black. resource B<fadeColor>.
144 143
145=item B<-tint> I<colour>
146
147Tint the transparent background with the given colour;
148resource I<tintColor>.
149
150=item B<-sh> I<number>
151
152Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153A value of 100 means no shading; resource I<shading>.
154
155=item B<-blt> I<string>
156
157Specify background blending type. If background pixmap is specified
158at the same time as transparency - such pixmap will be blended over
159the transparent background, using the method specified. Supported values are:
160B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
161B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
162B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
163alpha-blending. Compile I<afterimage>; resource I<blendType>.
164
165=item B<-blr> I<HxV>
166
167Apply Gaussian Blur with the specified radii to the transparent
168background. If a single number is specified - both vertical and
169horizontal radii are considered to be the same. Setting one of the
170radii to 1 and another to a large number creates interesting effects
171on some backgrounds. Maximum radius value is 128;
172resource I<blurRadius>.
173
174=item B<-icon> I<file> 144=item B<-icon> I<file>
175 145
176Compile I<afterimage> or I<pixbuf>: Use the specified image as application icon. This 146Compile I<pixbuf>: Use the specified image as application icon. This
177is used by many window managers, taskbars and pagers to represent the 147is used by many window managers, taskbars and pagers to represent the
178application window; resource I<iconFile>. 148application window; resource I<iconFile>.
179 149
180=item B<-bg> I<colour> 150=item B<-bg> I<colour>
181 151
182Window background colour; resource B<background>. 152Window background colour; resource B<background>.
183 153
184=item B<-fg> I<colour> 154=item B<-fg> I<colour>
185 155
186Window foreground colour; resource B<foreground>. 156Window foreground colour; resource B<foreground>.
187
188=item B<-pixmap> I<file[;oplist]>
189
190Compile I<afterimage> or I<pixbuf>: Specify image file for the background and also
191optionally specify a list of operations to modify it. Note you may need to
192add quotes to avoid special shell interpretation of the C<;> in the
193command-line; for more details see resource B<backgroundPixmap>.
194 157
195=item B<-cr> I<colour> 158=item B<-cr> I<colour>
196 159
197The cursor colour; resource B<cursorColor>. 160The cursor colour; resource B<cursorColor>.
198 161
… …
257 220
258=item B<-ls>|B<+ls> 221=item B<-ls>|B<+ls>
259 222
260Start as a login-shell/sub-shell; resource B<loginShell>. 223Start as a login-shell/sub-shell; resource B<loginShell>.
261 224
225=item B<-mc> I<milliseconds>
226
227Specify the maximum time between multi-click selections.
228
262=item B<-ut>|B<+ut> 229=item B<-ut>|B<+ut>
263 230
264Compile I<utmp>: Inhibit/enable writing a utmp entry; resource 231Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
265B<utmpInhibit>. 232B<utmpInhibit>.
266 233
… …
344 311
345=item B<-override-redirect> 312=item B<-override-redirect>
346 313
347Compile I<frills>: Sets override-redirect on the window; resource 314Compile I<frills>: Sets override-redirect on the window; resource
348B<override-redirect>. 315B<override-redirect>.
316
317=item B<-dockapp>
318
319Sets the initial state of the window to WithdrawnState, which makes
320window managers that support this extension treat it as a dockapp.
349 321
350=item B<-sbg> 322=item B<-sbg>
351 323
352Compile I<frills>: Disable the usage of the built-in block graphics/line 324Compile I<frills>: Disable the usage of the built-in block graphics/line
353drawing characters and just rely on what the specified fonts provide. Use 325drawing characters and just rely on what the specified fonts provide. Use
… …
408=item B<-pt> I<style> 380=item B<-pt> I<style>
409 381
410Compile I<XIM>: input style for input method; B<OverTheSpot>, 382Compile I<XIM>: input style for input method; B<OverTheSpot>,
411B<OffTheSpot>, B<Root>; resource B<preeditType>. 383B<OffTheSpot>, B<Root>; resource B<preeditType>.
412 384
385If the perl extension C<xim-onthespot> is used (which is the default),
386then additionally the C<OnTheSpot> preedit type is available.
387
413=item B<-im> I<text> 388=item B<-im> I<text>
414 389
415Compile I<XIM>: input method name. resource B<inputMethod>. 390Compile I<XIM>: input method name. resource B<inputMethod>.
416 391
417=item B<-imlocale> I<string> 392=item B<-imlocale> I<string>
… …
431Change the meaning of triple-click selection with the left mouse 406Change the meaning of triple-click selection with the left mouse
432button. Only effective when the original (non-perl) selection code is 407button. Only effective when the original (non-perl) selection code is
433in-use. Instead of selecting a full line it will extend the selection to 408in-use. Instead of selecting a full line it will extend the selection to
434the end of the logical line only. resource B<tripleclickwords>. 409the end of the logical line only. resource B<tripleclickwords>.
435 410
411=item B<-dpb>|B<+dpb>
412
413Compile frills: Disable (or enable) emitting bracketed paste mode
414sequences (default enabled). Bracketed paste mode allows programs
415to detect when something is pasted. Since more and more programs
416abuse this, these sequences can be disabled. The command sequences to
417enable and query paste mode will still work, but the actual bracket
418sequences will no longer be emitted. You can also toggle this from the
419ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
420
436=item B<-insecure> 421=item B<-insecure>
437 422
438Enable "insecure" mode, which currently enables most of the escape 423Enable "insecure" mode, which currently enables most of the escape
439sequences that echo strings. See the resource B<insecure> for more 424sequences that echo strings. See the resource B<insecure> for more
440info. 425info.
… …
452 437
453=item B<-ssr>|B<+ssr> 438=item B<-ssr>|B<+ssr>
454 439
455Turn on/off secondary screen scroll (default enabled); resource 440Turn on/off secondary screen scroll (default enabled); resource
456B<secondaryScroll>. 441B<secondaryScroll>.
442
443=item B<-rm> I<mode>
444
445Compile I<frills>: Sets long line rewrapping behaviour on window resizes
446to one of B<auto> (the default), B<always> or B<never>. The latter two
447modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
448is non-empty, and wings lines (acts like B<never>) otherwise; resource
449B<rewrapMode>.
457 450
458=item B<-hold>|B<+hold> 451=item B<-hold>|B<+hold>
459 452
460Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ 453Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
461will not immediately destroy its window when the program executed within 454will not immediately destroy its window when the program executed within
… …
539 close $pty; 532 close $pty;
540 533
541 # now communicate with rxvt 534 # now communicate with rxvt
542 my $slave = $pty->slave; 535 my $slave = $pty->slave;
543 while (<$slave>) { print $slave "got <$_>\n" } 536 while (<$slave>) { print $slave "got <$_>\n" }
537
538Note that, despite what the name might imply, the file descriptor does not
539need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
540domain or tcp socket). While tty operations cannot be done in this case,
541B<@@RXVT_NAME@@> can still be remote controlled with it:
542
543 use Socket;
544 use Fcntl;
545
546 socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
547 fcntl $slave, Fcntl::F_SETFD, 0;
548 system "exec @@RXVT_NAME|| -pty-fd " . (fileno $slave) . " &";
549 close $slave;
550
551 syswrite $URXVT, "Type a secret password: ";
552 my $secret = do { local $/ = "\r"; <$URXVT> };
553 print "Not so secret anymore: $secret\n";
544 554
545=item B<-pe> I<string> 555=item B<-pe> I<string>
546 556
547Comma-separated list of perl extension scripts to use (or not to use) in 557Comma-separated list of perl extension scripts to use (or not to use) in
548this terminal instance. See resource B<perl-ext> for details. 558this terminal instance. See resource B<perl-ext> for details.
… …
576be used. Command-line arguments can be used to override resource 586be used. Command-line arguments can be used to override resource
577settings. The following resources are supported (you might want to 587settings. The following resources are supported (you might want to
578check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl 588check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
579extensions not documented here): 589extensions not documented here):
580 590
581=over 4 591=over
582 592
583=item B<depth:> I<bitdepth> 593=item B<depth:> I<bitdepth>
584 594
585Compile I<xft>: Attempt to find a visual with the given bit depth; 595Compile I<xft>: Attempt to find a visual with the given bit depth;
586option B<-depth>. 596option B<-depth>.
… …
687 697
688B<False>: specify that everything is to be displayed, even 698B<False>: specify that everything is to be displayed, even
689if the refresh is too fast for the human eye to read anything (or the 699if the refresh is too fast for the human eye to read anything (or the
690monitor to display anything); option B<+ss>. 700monitor to display anything); option B<+ss>.
691 701
692=item B<transparent:> I<boolean>
693
694Turn on/off pseudo-transparency by using the root pixmap as background.
695
696B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
697future versions.
698
699=item B<fading:> I<number> 702=item B<fading:> I<number>
700 703
701Fade the text by the given percentage when focus is lost; option B<-fade>. 704Fade the text by the given percentage when focus is lost; option B<-fade>.
702 705
703=item B<fadeColor:> I<colour> 706=item B<fadeColor:> I<colour>
704 707
705Fade to this colour, when fading is used (see B<fading:>). The default 708Fade to this colour, when fading is used (see B<fading:>). The default
706colour is black; option B<-fadecolor>. 709colour is black; option B<-fadecolor>.
707 710
708=item B<tintColor:> I<colour>
709
710Tint the transparent background with the given colour. If the RENDER
711extension is not available only black, red, green, yellow, blue,
712magenta, cyan and white tints can be performed server-side. Note that
713a black tint yields a completely black image while a white tint yields
714the image unchanged; option B<-tint>.
715
716=item B<shading:> I<number>
717
718Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
719A value of 100 means no shading; option B<-sh>.
720
721=item B<blendType:> I<string>
722
723Specify background blending type; option B<-blt>.
724
725=item B<blurRadius:> I<number>
726
727Apply gaussian blur with the specified radius to the transparent
728background; option B<-blr>.
729
730=item B<iconFile:> I<file> 711=item B<iconFile:> I<file>
731 712
732Set the application icon pixmap; option B<-icon>. 713Set the application icon pixmap; option B<-icon>.
733 714
734=item B<scrollColor:> I<colour> 715=item B<scrollColor:> I<colour>
… …
742 723
743=item B<borderColor:> I<colour> 724=item B<borderColor:> I<colour>
744 725
745The colour of the border around the text area and between the scrollbar 726The colour of the border around the text area and between the scrollbar
746and the text. 727and the text.
747
748=item B<backgroundPixmap:> I<file[;oplist]>
749
750Use the specified image file for the background and also
751optionally specify a colon separated list of operations to modify it.
752Supported operations are:
753
754=over 4
755
756=item B<WxH+X+Y>
757
758sets scale and position. B<"W" / "H"> specify the horizontal/vertical
759scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
760scale of 0 disables scaling. The maximum permitted scale is 1000.
761
762=item B<op=tile>
763
764enables tiling
765
766=item B<op=keep-aspect>
767
768maintain the image aspect ratio when scaling
769
770=item B<op=root-align>
771
772use the position of the terminal window relative to the root window as
773the image offset, simulating a root window background
774
775=back
776
777The default scale and position setting is C<100x100+50+50>.
778Alternatively, a predefined set of templates can be used to achieve
779the most common setups:
780
781=over 4
782
783=item B<style=tiled>
784
785the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
786
787=item B<style=aspect-stretched>
788
789the image is scaled to fill the whole window maintaining the aspect
790ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
791
792=item B<style=stretched>
793
794the image is scaled to fill the whole window. Equivalent to 100x100
795
796=item B<style=centered>
797
798the image is centered with no scaling. Equivalent to 0x0+50+50
799
800=item B<style=root-tiled>
801
802the image is tiled with no scaling and using 'root' positioning.
803Equivalent to 0x0:op=tile:op=root-align
804
805=back
806
807If multiple templates are specified the last one wins. Note that a
808template overrides all the scale, position and operations settings.
809
810If used in conjunction with B<-tr> option, the specified pixmap will be
811blended over the transparent background using alpha-blending. If I<afterimage>
812support has been compiled in it is possible to choose other blending
813types with B<-blt "type"> option.
814
815=item B<path:> I<path>
816
817Specify the colon-delimited search path for finding background image files.
818 728
819=item B<font:> I<fontlist> 729=item B<font:> I<fontlist>
820 730
821Select the fonts to be used. This is a comma separated list of font names 731Select the fonts to be used. This is a comma separated list of font names
822that are checked in order when trying to find glyphs for characters. The 732that are checked in order when trying to find glyphs for characters. The
… …
919 829
920B<True>: start as a login shell by prepending a `-' to B<argv[0]> of 830B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
921the shell; option B<-ls>. B<False>: start as a normal sub-shell 831the shell; option B<-ls>. B<False>: start as a normal sub-shell
922[default]; option B<+ls>. 832[default]; option B<+ls>.
923 833
834=item B<multiClickTime:> I<number>
835
836Specify the maximum time in milliseconds between multi-click select
837events. The default is 500 milliseconds; option B<-mc>.
838
924=item B<utmpInhibit:> I<boolean> 839=item B<utmpInhibit:> I<boolean>
925 840
926B<True>: inhibit writing record into the system log file B<utmp>; 841B<True>: inhibit writing record into the system log file B<utmp>;
927option B<-ut>. B<False>: write record into the system log file B<utmp> 842option B<-ut>. B<False>: write record into the system log file B<utmp>
928[default]; option B<+ut>. 843[default]; option B<+ut>.
… …
991are not passed onto the shell; option B<-sk>. B<False>: do not scroll to 906are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
992bottom when a non-special key is pressed; option B<+sk>. 907bottom when a non-special key is pressed; option B<+sk>.
993 908
994=item B<saveLines:> I<number> 909=item B<saveLines:> I<number>
995 910
996Save I<number> lines in the scrollback buffer [default 64]. This 911Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
997resource is limited on most machines to 65535; option B<-sl>.
998 912
999=item B<internalBorder:> I<number> 913=item B<internalBorder:> I<number>
1000 914
1001Internal border of I<number> pixels. This resource is limited to 100; 915Internal border of I<number> pixels. This resource is limited to 100;
1002option B<-b>. 916option B<-b>.
… …
1065 979
1066=item B<pointerColor2:> I<colour> 980=item B<pointerColor2:> I<colour>
1067 981
1068Mouse pointer background colour. 982Mouse pointer background colour.
1069 983
984=item B<pointerShape:> I<string>
985
986Compile I<frills>: Specifies the name of the mouse pointer shape
987[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
988file for possible values (omit the C<XC_> prefix).
989
1070=item B<pointerBlankDelay:> I<number> 990=item B<pointerBlankDelay:> I<number>
1071 991
1072Specifies number of seconds before blanking the pointer [default 2]. Use a 992Specifies number of seconds before blanking the pointer [default 2]. Use a
1073large number (e.g. C<987654321>) to effectively disable the timeout. 993large number (e.g. C<987654321>) to effectively disable the timeout.
1074 994
… …
1100 1020
1101B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >> 1021B<< BACKSLASH `"'&()*,;<=>?@[]^{|} >>
1102 1022
1103=item B<preeditType:> I<style> 1023=item B<preeditType:> I<style>
1104 1024
1105B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>. 1025B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1106 1026
1107=item B<inputMethod:> I<name> 1027=item B<inputMethod:> I<name>
1108 1028
1109I<name> of inputMethod to use; option B<-im>. 1029I<name> of inputMethod to use; option B<-im>.
1110 1030
… …
1128 1048
1129Change the meaning of triple-click selection with the left mouse 1049Change the meaning of triple-click selection with the left mouse
1130button. Instead of selecting a full line it will extend the selection to 1050button. Instead of selecting a full line it will extend the selection to
1131the end of the logical line only; option B<-tcw>. 1051the end of the logical line only; option B<-tcw>.
1132 1052
1053=item B<disablePasteBrackets:> I<boolean>
1054
1055Prevent emission of paste bracket sequences; option B<-dpb>.
1056
1133=item B<insecure:> I<boolean> 1057=item B<insecure:> I<boolean>
1134 1058
1135Enables "insecure" mode. Rxvt-unicode offers some escape sequences that 1059Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1136echo arbitrary strings like the icon name or the locale. This could be 1060echo arbitrary strings like the icon name or the locale. This could be
1137abused if somebody gets 8-bit-clean access to your display, whether 1061abused if somebody gets 8-bit-clean access to your display, whether
1138through a mail client displaying mail bodies unfiltered or through 1062through a mail client displaying mail bodies unfiltered or through
1139write(1) or any other means. Therefore, these sequences are disabled by 1063write(1) or any other means. Therefore, these sequences are disabled by
1140default. (Note that many other terminals, including xterm, have these 1064default. (Note that many other terminals, including xterm, have these
… …
1158 1082
1159=item B<secondaryScreen:> I<boolean> 1083=item B<secondaryScreen:> I<boolean>
1160 1084
1161Turn on/off secondary screen (default enabled). 1085Turn on/off secondary screen (default enabled).
1162 1086
1087=item B<rewrapMode:> I<mode>
1088
1089Sets long line rewrap behaviour on window resize to one of B<auto>
1090(default), B<always> or B<never>.
1091
1163=item B<secondaryScroll:> I<boolean> 1092=item B<secondaryScroll:> I<boolean>
1164 1093
1165Turn on/off secondary screen scroll (default enabled). If this 1094Turn on/off secondary screen scroll (default enabled). If this
1166option is enabled, scrolls on the secondary screen will change the 1095option is enabled, scrolls on the secondary screen will change the
1167scrollback buffer and, when secondaryScreen is off, switching 1096scrollback buffer and, when secondaryScreen is off, switching
… …
1179Sets the working directory for the shell (or the command specified via 1108Sets the working directory for the shell (or the command specified via
1180B<-e>). The I<path> must be an absolute path and it must exist for 1109B<-e>). The I<path> must be an absolute path and it must exist for
1181@@RXVT_NAME@@ to start. If it isn't specified then the current working 1110@@RXVT_NAME@@ to start. If it isn't specified then the current working
1182directory will be used; option B<-cd>. 1111directory will be used; option B<-cd>.
1183 1112
1184=item B<keysym.>I<sym>: I<string> 1113=item B<keysym.>I<sym>: I<action>
1185 1114
1186Compile I<frills>: Associate I<string> with keysym I<sym>. The 1115Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1187intervening resource name B<keysym.> cannot be omitted. 1116resource name B<keysym.> cannot be omitted.
1188 1117
1189The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1118Using this resource, you can map key combinations such as
1190any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1119C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1191B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1120string than would normally result from that combination, making the
1192and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1121terminal scroll up or down the way you want it, or any other thing an
1193B<2>, B<3>, B<4>, B<5>. 1122extension might provide.
1123
1124The key combination that triggers the action, I<sym>, has the following format:
1125
1126 (modifiers-)key
1127
1128Where I<modifiers> can be any combination of the following full or
1129abbreviated modifier names:
1130
1131=begin table
1132
1133 B<ISOLevel3> B<I>
1134 B<AppKeypad> B<K>
1135 B<Control> B<C>
1136 B<NumLock> B<N>
1137 B<Shift> B<S>
1138 B<Meta> B<M> I<or> B<A>
1139 B<Lock> B<L>
1140 B<Mod1> B<1>
1141 B<Mod2> B<2>
1142 B<Mod3> B<3>
1143 B<Mod4> B<4>
1144 B<Mod5> B<5>
1145
1146=end table
1194 1147
1195The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1148The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1196whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1149whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1197keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1150keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1198current application keymap mode state. 1151current application keymap mode state.
1199 1152
1200The spellings of I<key> can be obtained by using B<xev>(1) command or 1153Due the the large number of modifier combinations, a key mapping will
1201searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1154match if I<at least> the specified identifiers are being set, and no other
1155key mappings with those and more bits are being defined. That means that
1156defining a mapping for C<a> will automatically provide definitions for
1157C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1158themselves. See the C<builtin:> action, below, for a way to work around
1159this when this is a problem.
1160
1161The spelling of I<key> depends on your implementation of X. An easy way to
1162find a key name is to use the B<xev>(1) command. You can find a list by
1163looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1202omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1164the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1203keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1165value (B<0x0000 - 0xFFFF>).
1204performed in an exact manner; however, the closest match is assured.
1205 1166
1206I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1167As with any resource value, the I<action> string may contain backslash
1168escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1207number), see RESOURCES in C<man 7 X> for further details. 1169number), see RESOURCES in C<man 7 X> for further details.
1208 1170
1209You can define a range of keysyms in one shot by 1171An action starts with an action prefix that selects a certain type
1210loading the C<keysym-list> perl extension and providing a I<string> 1172of action, followed by a colon. An action string without colons is
1211with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1173interpreted as a literal string to pass to the tty (as if it was
1174prefixed with C<string:>).
1175
1176The following action prefixes are known - extensions can provide
1177additional prefixes:
1178
1179=over
1180
1181=item string:STRING
1182
1183If the I<action> starts with C<string:> (or otherwise contains no colons),
1184then the remaining C<STRING> will be passed to the program running in the
1185terminal. For example, you could replace whatever Shift-Tab outputs by the
1186string C<echo rm -rf /> followed by a newline:
1187
1188 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1189
1190This could in theory be used to completely redefine your keymap.
1191
1192In addition, for actions of this type, you can define a range of
1193keysyms in one shot by loading the C<keysym-list> perl extension and
1194providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1212should be a character not used by the strings. 1195the delimiter `/' should be a character not used by the strings.
1213 1196
1214Its usage can be demonstrated by an example: 1197Its usage can be demonstrated by an example:
1215 1198
1216 URxvt.keysym.M-C-0x61: list|\033<|abc|> 1199 URxvt.keysym.M-C-0x61: list|\033<|abc|>
1217 1200
1218The above line is equivalent to the following three lines: 1201The above line is equivalent to the following three lines:
1219 1202
1220 URxvt.keysym.Meta-Control-0x61: \033<a> 1203 URxvt.keysym.Meta-Control-0x61: string:\033<a>
1221 URxvt.keysym.Meta-Control-0x62: \033<b> 1204 URxvt.keysym.Meta-Control-0x62: string:\033<b>
1222 URxvt.keysym.Meta-Control-0x63: \033<c> 1205 URxvt.keysym.Meta-Control-0x63: string:\033<c>
1223 1206
1207=item command:STRING
1208
1224If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1209If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1225is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1210is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1211the opposite of C<string:> - instead of sending it to the program running
1212in the terminal, it will be treated as if it were program output). This is
1213most useful to feed command sequences into @@RXVT_NAME@@.
1214
1226example the following means "change the current locale to C<zh_CN.GBK> 1215For example the following means "change the current locale to C<zh_CN.GBK>
1227when Control-Meta-c is being pressed": 1216when Control-Meta-c is being pressed":
1228 1217
1229 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1218 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1230 1219
1231If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1220The following example will map Control-Meta-1 and Control-Meta-2 to
1232is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3) 1221the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1233manpage. For example, the F<selection> extension (activated via 1222font-switching at runtime:
1234C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1235 1223
1236 URxvt.keysym.M-C-c: perl:selection:rot13 1224 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1225 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1237 1226
1238Due the the large number of modifier combinations, a defined key mapping 1227Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1239will match if I<at least> the specified identifiers are being set, and 1228info):
1240no other key mappings with those and more bits are being defined. That
1241means that defining a key map for C<a> will automatically provide
1242definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1243mappings themselves.
1244 1229
1245Unfortunately, this will override built-in key mappings. For example 1230 URxvt.keysym.M-C-3: command:\033[8;25;80t
1231 URxvt.keysym.M-C-4: command:\033[8;48;110t
1232
1233=item builtin:
1234
1235The builtin action is the action that @@RXVT_NAME@@ would execute if no
1236key binding existed for the key combination. The obvious use is to undo
1237the effect of existing bindings. The not so obvious use is to reinstate
1238bindings when another binding overrides too many modifiers.
1239
1246if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1240For example if you overwrite the C<Insert> key you will disable
1247C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1241@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1248user-defined keymap using the C<builtin:> replacement: 1242"holes" into the user-defined keymap using the C<builtin:> replacement:
1249 1243
1250 URxvt.keysym.Insert: <my insert key sequence> 1244 URxvt.keysym.Insert: <my insert key sequence>
1251 URxvt.keysym.S-Insert: builtin: 1245 URxvt.keysym.S-Insert: builtin:
1252 1246
1253The first line defines a mapping for C<Insert> and I<any> combination 1247The first line defines a mapping for C<Insert> and I<any> combination
1254of modifiers. The second line re-establishes the default mapping for 1248of modifiers. The second line re-establishes the default mapping for
1255C<Shift-Insert>. 1249C<Shift-Insert>.
1256 1250
1257The following example will map Control-Meta-1 and Control-Meta-2 to 1251=item builtin-string:
1258the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1259font-switching at runtime:
1260 1252
1261 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1253This action is mainly useful to restore string mappings for keys that
1262 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1254have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1255difficult to explain - basically, this action will send the string to the
1256application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1257action for it.
1263 1258
1264Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1259An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1265info): 1260selection when you press C<Shift-Insert>. With the following bindings, it
1261would instead emit the (undocumented, but what applications running in the
1262terminal might expect) sequence C<ESC [ 2 $> instead:
1266 1263
1267 URxvt.keysym.M-C-3: command:\033[8;25;80t 1264 URxvt.keysym.S-Insert: builtin-string:
1268 URxvt.keysym.M-C-4: command:\033[8;48;110t 1265 URxvt.keysym.C-S-Insert: builtin:
1266
1267The first line disables the paste functionality for that key
1268combination, and the second reinstates the default behaviour for
1269C<Control-Shift-Insert>, which would otherwise be overridden.
1270
1271Similarly, to let applications gain access to the C<C-M-c> (copy to
1272clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1273this:
1274
1275 URxvt.keysym.C-M-c: builtin-string:
1276 URxvt.keysym.C-M-v: builtin-string:
1277
1278=item EXTENSION:STRING
1279
1280An action of this form invokes the action B<STRING>, if any, provided
1281by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
1282be loaded automatically if necessary.
1283
1284Not all extensions define actions, but popular extensions that do
1285include the I<selection> and I<matcher> extensions (documented in their
1286own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1287respectively).
1288
1289From the silly examples department, this will rot13-"encrypt"
1290@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1291keyboards:
1292
1293 URxvt.keysym.M-C-c: selection:rot13
1294
1295=item perl:STRING *DEPRECATED*
1296
1297This is a deprecated way of invoking commands provided by perl
1298extensions. It is still supported, but should not be used anymore.
1299
1300=back
1269 1301
1270=item B<perl-ext-common>: I<string> 1302=item B<perl-ext-common>: I<string>
1271 1303
1272=item B<perl-ext>: I<string> 1304=item B<perl-ext>: I<string>
1273 1305
1274Comma-separated list(s) of perl extension scripts (default: C<default>) to 1306Comma-separated list(s) of perl extension scripts (default: C<default>) to
1275use in this terminal instance; option B<-pe>. 1307use in this terminal instance; option B<-pe>.
1276 1308
1277Extension names can be prefixed with a C<-> sign to prohibit using 1309Extension names can be prefixed with a C<-> sign to remove them again, in
1278them. This can be useful to selectively disable some extensions loaded 1310case they had been specified earlier. This can be useful to selectively
1279by default, or specified via the C<perl-ext-common> resource. For 1311disable some extensions loaded by default, or specified via the
1280example, C<default,-selection> will use all the default extension except 1312C<perl-ext-common> resource. For example, C<default,-selection> will use
1281C<selection>. 1313all the default extensions except C<selection>.
1282 1314
1283Extension names can also be followed by an argument in angle brackets 1315To prohibit autoloading of extensions, you can prefix them with C</>,
1284(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1316which will make urxvt refuse to automatically load them (this can be
1285searchable scrollback to Alt/Meta-s). Mentioning the same extension 1317overriden, however, by specifying the extension name again without a
1286multiple times with different arguments will pass multiple arguments to 1318prefix, though). This does not prohibit extensions themselves loading
1287the extension. 1319other extensions. For example, C<default,/background> will keep the
1320C<background> extension from being loaded when a background OSC sequence
1321is received.
1322
1323The default set includes the C<selection>, C<option-popup>,
1324C<selection-popup>, C<readline>, C<searchable-scrollback> and
1325C<confirm-paste> extensions, as well as any extensions which are mentioned
1326in B<keysym> resources.
1327
1328Any extension such that a corresponding resource is given on the
1329command line is automatically appended to B<perl-ext>.
1288 1330
1289Each extension is looked up in the library directories, loaded if 1331Each extension is looked up in the library directories, loaded if
1290necessary, and bound to the current terminal instance. 1332necessary, and bound to the current terminal instance. When the library
1333search path contains multiple extension files of the same name, then the
1334first one found will be used.
1291 1335
1292If both of these resources are the empty string, then the perl 1336If both of these resources are the empty string, then the perl interpreter
1293interpreter will not be initialized. The idea behind two options is that 1337will not be initialized. The rationale for having two options is that
1294B<perl-ext-common> will be used for extensions that should be available to 1338B<perl-ext-common> will be used for extensions that should be available to
1295all instances, while B<perl-ext> is used for specific instances. 1339all instances, while B<perl-ext> is used for specific instances.
1296 1340
1297=item B<perl-eval>: I<string> 1341=item B<perl-eval>: I<string>
1298 1342
… …
1300the @@RXVT_NAME@@perl(3) manpage. 1344the @@RXVT_NAME@@perl(3) manpage.
1301 1345
1302=item B<perl-lib>: I<path> 1346=item B<perl-lib>: I<path>
1303 1347
1304Colon-separated list of additional directories that hold extension 1348Colon-separated list of additional directories that hold extension
1305scripts. When looking for perl extensions, @@RXVT_NAME@@ will first 1349scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1306look in these directories, then in $HOME/.urxvt/ext and lastly in 1350in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1307F<@@RXVT_LIBDIR@@/urxvt/perl/>. 1351lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1308 1352
1309See the @@RXVT_NAME@@perl(3) manpage. 1353See the @@RXVT_NAME@@perl(3) manpage.
1310 1354
1311=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1355=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1312 1356
… …
1316=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1360=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1317 1361
1318Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1362Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1319for details. 1363for details.
1320 1364
1321=item B<searchable-scrollback:> I<keysym> 1365=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1322 1366
1323Sets the hotkey that starts the incremental scrollback buffer search 1367This resource is deprecated and will be removed. Use a B<keysym> resource
1324(default: C<M-s>). 1368instead, e.g.:
1325 1369
1370 URxvt.keysym.M-s: searchable-scrollback:start
1371
1326=item B<urlLauncher>: I<string> 1372=item B<url-launcher>: I<string>
1327 1373
1328Specifies the program to be started with a URL argument. Used by the 1374Specifies the program to be started with a URL argument. Used by the
1329C<selection-popup> and C<matcher> perl extensions. 1375C<selection-popup> and C<matcher> perl extensions.
1330 1376
1331=item B<transient-for>: I<windowid> 1377=item B<transient-for>: I<windowid>
… …
1375=head1 THE SELECTION: SELECTING AND PASTING TEXT 1421=head1 THE SELECTION: SELECTING AND PASTING TEXT
1376 1422
1377The behaviour of text selection and insertion/pasting mechanism is similar 1423The behaviour of text selection and insertion/pasting mechanism is similar
1378to I<xterm>(1). 1424to I<xterm>(1).
1379 1425
1380=over 4 1426=over
1381 1427
1382=item B<Selecting>: 1428=item B<Selecting>:
1383 1429
1384Left click at the beginning of the region, drag to the end of the region 1430Left click at the beginning of the region, drag to the end of the region
1385and release; Right click to extend the marked region; Left double-click 1431and release; Right click to extend the marked region; Left double-click
… …
1400B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1446B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1401 1447
1402Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1448Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1403inserted too. 1449inserted too.
1404 1450
1451rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1452<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1453binding causes the value of the internal selection to be copied to the
1454CLIPBOARD selection, while the second binding causes the value of the
1455CLIPBOARD selection to be inserted.
1456
1405=back 1457=back
1406 1458
1407=head1 CHANGING FONTS 1459=head1 CHANGING FONTS
1408 1460
1409Changing fonts (or font sizes, respectively) via the keypad is not yet 1461Changing fonts (or font sizes, respectively) via the keypad is not yet
… …
1426and character codes using the keyboard. It consists of 4 parts. The 1478and character codes using the keyboard. It consists of 4 parts. The
1427first part is available if rxvt-unicode has been compiled with 1479first part is available if rxvt-unicode has been compiled with
1428C<--enable-frills>, the rest is available when rxvt-unicode was compiled 1480C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1429with C<--enable-iso14755>. 1481with C<--enable-iso14755>.
1430 1482
1431=over 4 1483=over
1432 1484
1433=item * 5.1: Basic method 1485=item * 5.1: Basic method
1434 1486
1435This allows you to enter unicode characters using their hexcode. 1487This allows you to enter unicode characters using their hexcode.
1436 1488
… …
1497In addition to the default foreground and background colours, 1549In addition to the default foreground and background colours,
1498B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus 1550B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1499high-intensity (potentially bold/blink) versions of the same, and 72 (or 1551high-intensity (potentially bold/blink) versions of the same, and 72 (or
1500240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB 1552240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1501cube plus a 8 (24) colour greyscale ramp. 1553cube plus a 8 (24) colour greyscale ramp.
1554
1555B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
1556C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
1557number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
1558colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
155924-bit colour space. When indexing collisions happen, the nearest old colour in
1560the cube will be adapted to the new 24-bit RGB colour. That means one cannot
1561use many similar 24-bit colours. It's typically not a problem in common
1562scenarios.
1502 1563
1503Here is a list of the ANSI colours with their names. 1564Here is a list of the ANSI colours with their names.
1504 1565
1505=begin table 1566=begin table
1506 1567
… …
1533The following text gives values for the standard 88 colour mode (and 1594The following text gives values for the standard 88 colour mode (and
1534values for the 256 colour mode in parentheses). 1595values for the 256 colour mode in parentheses).
1535 1596
1536The RGB cube uses indices 16..79 (16..231) using the following formulas: 1597The RGB cube uses indices 16..79 (16..231) using the following formulas:
1537 1598
1538 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3 1599 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1539 index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15 1600 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1540 1601
1541The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10% 1602The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1542steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of 1603steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1543the RGB cube. 1604the RGB cube.
1544 1605
… …
1607 1668
1608=head1 ENVIRONMENT 1669=head1 ENVIRONMENT
1609 1670
1610B<@@RXVT_NAME@@> sets and/or uses the following environment variables: 1671B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1611 1672
1612=over 4 1673=over
1613 1674
1614=item B<TERM> 1675=item B<TERM>
1615 1676
1616Normally set to C<rxvt-unicode>, unless overwritten at configure time, via 1677Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1617resources or on the command line. 1678resources or on the command line.
… …
1652 1713
1653=item B<SHELL> 1714=item B<SHELL>
1654 1715
1655The shell to be used for command execution, defaults to C</bin/sh>. 1716The shell to be used for command execution, defaults to C</bin/sh>.
1656 1717
1657=item B<RXVT_SOCKET> 1718=item B<RXVT_SOCKET> [I<sic>]
1658 1719
1659The unix domain socket path used by @@RXVT_NAME@@c(1) and 1720The unix domain socket path used by @@RXVT_NAME@@c(1) and
1660@@RXVT_NAME@@d(1). 1721@@RXVT_NAME@@d(1).
1661 1722
1662Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>. 1723Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1724
1725=item B<URXVT_PERL_LIB>
1726
1727Additional F<:>-separated library search path for perl extensions. Will be
1728searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1729directory.
1730
1731=item B<URXVT_PERL_VERBOSITY>
1732
1733See L<@@RXVT_NAME@@perl>(3).
1663 1734
1664=item B<HOME> 1735=item B<HOME>
1665 1736
1666Used to locate the default directory for the unix domain socket for 1737Used to locate the default directory for the unix domain socket for
1667daemon communications and to locate various resource files (such as 1738daemon communications and to locate various resource files (such as
… …
1678 1749
1679=back 1750=back
1680 1751
1681=head1 FILES 1752=head1 FILES
1682 1753
1683=over 4 1754=over
1684 1755
1685=item B</usr/lib/X11/rgb.txt> 1756=item B</usr/lib/X11/rgb.txt>
1686 1757
1687Colour names. 1758Colour names.
1688 1759
1689=back 1760=back
1690 1761
1691=head1 SEE ALSO 1762=head1 SEE ALSO
1692 1763
1764@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1693@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1765@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1694 1766
1695=head1 CURRENT PROJECT COORDINATOR 1767=head1 CURRENT PROJECT COORDINATOR
1696 1768
1697=over 4 1769=over
1698 1770
1699=item Project Coordinator 1771=item Project Coordinator
1700 1772
1701Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1773Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1702 1774
1703L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1775L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1704 1776
1705=back 1777=back
1706 1778
1707=head1 AUTHORS 1779=head1 AUTHORS
1708 1780
1709=over 4 1781=over
1710 1782
1711=item John Bovey 1783=item John Bovey
1712 1784
1713University of Kent, 1992, wrote the original Xvt. 1785University of Kent, 1992, wrote the original Xvt.
1714 1786
1715=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1787=item Rob Nation <nation@rocket.sanders.lockheed.com>
1716 1788
1717very heavily modified Xvt and came up with Rxvt 1789very heavily modified Xvt and came up with Rxvt
1718 1790
1719=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1791=item Angelo Haritsis <ah@doc.ic.ac.uk>
1720 1792
1721wrote the Greek Keyboard Input (no longer in code) 1793wrote the Greek Keyboard Input (no longer in code)
1722 1794
1723=item mj olesen L<< <olesen@me.QueensU.CA> >> 1795=item mj olesen <olesen@me.QueensU.CA>
1724 1796
1725Wrote the menu system. 1797Wrote the menu system.
1726 1798
1727Project Coordinator (changes.txt 2.11 to 2.21) 1799Project Coordinator (changes.txt 2.11 to 2.21)
1728 1800
1729=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1801=item Oezguer Kesim <kesim@math.fu-berlin.de>
1730 1802
1731Project Coordinator (changes.txt 2.21a to 2.4.5) 1803Project Coordinator (changes.txt 2.21a to 2.4.5)
1732 1804
1733=item Geoff Wing L<< <gcw@pobox.com> >> 1805=item Geoff Wing <gcw@pobox.com>
1734 1806
1735Rewrote screen display and text selection routines. 1807Rewrote screen display and text selection routines.
1736 1808
1737Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1809Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1738 1810
1739=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1811=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1740 1812
1741Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1813Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1742extension, random hacks, numerous bugfixes and extensions. 1814extension, random hacks, numerous bugfixes and extensions.
1743 1815
1744Project Coordinator (Changes 1.0 -) 1816Project Coordinator (Changes 1.0 -)
1745 1817
1746=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1818=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1747 1819
1748pty/utmp code rewrite, image code improvements, many random hacks and bugfixes. 1820pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1749 1821
1750=back 1822=back
1751 1823

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines