[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.168 by root, Tue Nov 4 11:03:29 2008 UTC vs.
Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126		132
127	=item B<-tr>\|B<+tr>	133	=item B<-fps> I<number>
128		134
129	Turn on/off illusion of a transparent window background; resource B<transparent>.	135	Compile I<frills>: Set the refresh interval (in frames per second or
130		136	negative seconds); resource B<refreshRate>.
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		137
137	=item B<-fade> I<number>	138	=item B<-fade> I<number>
138		139
139	Fade the text by the given percentage when focus is lost. Small values	140	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	141	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	144	=item B<-fadecolor> I<colour>
144		145
145	Fade to this colour when fading is used (see B<-fade>). The default colour	146	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	147	is opaque black. resource B<fadeColor>.
147		148
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	149	=item B<-icon> I<file>
188		150
189	Compile I<afterimage>: Use the specified image as application icon. This	151	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	152	is used by many window managers, taskbars and pagers to represent the
191	appliation window; resource I<iconFile>.	153	application window; resource I<iconFile>.
192		154
193	=item B<-bg> I<colour>	155	=item B<-bg> I<colour>
194		156
195	Window background colour; resource B<background>.	157	Window background colour; resource B<background>.
196		158
197	=item B<-fg> I<colour>	159	=item B<-fg> I<colour>
198		160
199	Window foreground colour; resource B<foreground>.	161	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		162
208	=item B<-cr> I<colour>	163	=item B<-cr> I<colour>
209		164
210	The cursor colour; resource B<cursorColor>.	165	The cursor colour; resource B<cursorColor>.
211		166
…		…
270		225
271	=item B<-ls>\|B<+ls>	226	=item B<-ls>\|B<+ls>
272		227
273	Start as a login-shell/sub-shell; resource B<loginShell>.	228	Start as a login-shell/sub-shell; resource B<loginShell>.
274		229
		230	=item B<-mc> I<milliseconds>
		231
		232	Specify the maximum time between multi-click selections.
		233
275	=item B<-ut>\|B<+ut>	234	=item B<-ut>\|B<+ut>
276		235
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	236	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	237	B<utmpInhibit>.
279		238
…		…
321		280
322	=item B<-bc>\|B<+bc>	281	=item B<-bc>\|B<+bc>
323		282
324	Blink the cursor; resource B<cursorBlink>.	283	Blink the cursor; resource B<cursorBlink>.
325		284
		285	=item B<-uc>\|B<+uc>
		286
		287	Make the cursor underlined; resource B<cursorUnderline>.
		288
326	=item B<-iconic>	289	=item B<-iconic>
327		290
328	Start iconified, if the window manager supports that option.	291	Start iconified, if the window manager supports that option.
329	Alternative form is B<-ic>.	292	Alternative form is B<-ic>.
330		293
…		…
354	=item B<-override-redirect>	317	=item B<-override-redirect>
355		318
356	Compile I<frills>: Sets override-redirect on the window; resource	319	Compile I<frills>: Sets override-redirect on the window; resource
357	B<override-redirect>.	320	B<override-redirect>.
358		321
		322	=item B<-dockapp>
		323
		324	Sets the initial state of the window to WithdrawnState, which makes
		325	window managers that support this extension treat it as a dockapp.
		326
359	=item B<-sbg>	327	=item B<-sbg>
360		328
361	Compile I<frills>: Disable the usage of the built-in block graphics/line	329	Compile I<frills>: Disable the usage of the built-in block graphics/line
362	drawing characters and just rely on what the specified fonts provide. Use	330	drawing characters and just rely on what the specified fonts provide. Use
363	this if you have a good font and want to use its block graphic glyphs;	331	this if you have a good font and want to use its block graphic glyphs;
…		…
366	=item B<-lsp> I<number>	334	=item B<-lsp> I<number>
367		335
368	Compile I<frills>: Lines (pixel height) to insert between each row of	336	Compile I<frills>: Lines (pixel height) to insert between each row of
369	the display. Useful to work around font rendering problems; resource	337	the display. Useful to work around font rendering problems; resource
370	B<lineSpace>.	338	B<lineSpace>.
		339
		340	=item B<-letsp> I<number>
		341
		342	Compile I<frills>: Amount to adjust the computed character width by
		343	to control overall letter spacing. Negative values will tighten up the
		344	letter spacing, positive values will space letters out more. Useful to
		345	work around odd font metrics; resource B<letterSpace>.
371		346
372	=item B<-tn> I<termname>	347	=item B<-tn> I<termname>
373		348
374	This option specifies the name of the terminal type to be set in the	349	This option specifies the name of the terminal type to be set in the
375	B<TERM> environment variable. This terminal type must exist in the	350	B<TERM> environment variable. This terminal type must exist in the
…		…
410	=item B<-pt> I<style>	385	=item B<-pt> I<style>
411		386
412	Compile I<XIM>: input style for input method; B<OverTheSpot>,	387	Compile I<XIM>: input style for input method; B<OverTheSpot>,
413	B<OffTheSpot>, B<Root>; resource B<preeditType>.	388	B<OffTheSpot>, B<Root>; resource B<preeditType>.
414		389
		390	If the perl extension C<xim-onthespot> is used (which is the default),
		391	then additionally the C<OnTheSpot> preedit type is available.
		392
415	=item B<-im> I<text>	393	=item B<-im> I<text>
416		394
417	Compile I<XIM>: input method name. resource B<inputMethod>.	395	Compile I<XIM>: input method name. resource B<inputMethod>.
418		396
419	=item B<-imlocale> I<string>	397	=item B<-imlocale> I<string>
…		…
433	Change the meaning of triple-click selection with the left mouse	411	Change the meaning of triple-click selection with the left mouse
434	button. Only effective when the original (non-perl) selection code is	412	button. Only effective when the original (non-perl) selection code is
435	in-use. Instead of selecting a full line it will extend the selection to	413	in-use. Instead of selecting a full line it will extend the selection to
436	the end of the logical line only. resource B<tripleclickwords>.	414	the end of the logical line only. resource B<tripleclickwords>.
437		415
		416	=item B<-dpb>\|B<+dpb>
		417
		418	Compile frills: Disable (or enable) emitting bracketed paste mode
		419	sequences (default enabled). Bracketed paste mode allows programs
		420	to detect when something is pasted. Since more and more programs
		421	abuse this, these sequences can be disabled. The command sequences to
		422	enable and query paste mode will still work, but the actual bracket
		423	sequences will no longer be emitted. You can also toggle this from the
		424	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		425
438	=item B<-insecure>	426	=item B<-insecure>
439		427
440	Enable "insecure" mode, which currently enables most of the escape	428	Enable "insecure" mode, which currently enables most of the escape
441	sequences that echo strings. See the resource B<insecure> for more	429	sequences that echo strings. See the resource B<insecure> for more
442	info.	430	info.
…		…
454		442
455	=item B<-ssr>\|B<+ssr>	443	=item B<-ssr>\|B<+ssr>
456		444
457	Turn on/off secondary screen scroll (default enabled); resource	445	Turn on/off secondary screen scroll (default enabled); resource
458	B<secondaryScroll>.	446	B<secondaryScroll>.
		447
		448	=item B<-rm> I<mode>
		449
		450	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		451	to one of B<auto> (the default), B<always> or B<never>. The latter two
		452	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		453	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		454	B<rewrapMode>.
459		455
460	=item B<-hold>\|B<+hold>	456	=item B<-hold>\|B<+hold>
461		457
462	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	458	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
463	will not immediately destroy its window when the program executed within	459	will not immediately destroy its window when the program executed within
…		…
542		538
543	# now communicate with rxvt	539	# now communicate with rxvt
544	my $slave = $pty->slave;	540	my $slave = $pty->slave;
545	while (<$slave>) { print $slave "got <$_>\n" }	541	while (<$slave>) { print $slave "got <$_>\n" }
546		542
		543	Note that, despite what the name might imply, the file descriptor does not
		544	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		545	domain or tcp socket). While tty operations cannot be done in this case,
		546	B<@@RXVT_NAME@@> can still be remote controlled with it:
		547
		548	use Socket;
		549	use Fcntl;
		550
		551	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		552	fcntl $slave, Fcntl::F_SETFD, 0;
		553	system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
		554	close $slave;
		555
		556	syswrite $URXVT, "Type a secret password: ";
		557	my $secret = do { local $/ = "\r"; <$URXVT> };
		558	print "Not so secret anymore: $secret\n";
		559
547	=item B<-pe> I<string>	560	=item B<-pe> I<string>
548		561
549	Comma-separated list of perl extension scripts to use (or not to use) in	562	Comma-separated list of perl extension scripts to use (or not to use) in
550	this terminal instance. See resource B<perl-ext> for details.	563	this terminal instance. See resource B<perl-ext> for details.
551		564
…		…
560	You can set and change the resources using X11 tools like B<xrdb>. Many	573	You can set and change the resources using X11 tools like B<xrdb>. Many
561	distribution do also load settings from the B<~/.Xresources> file when X	574	distribution do also load settings from the B<~/.Xresources> file when X
562	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	575	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
563	with later settings overwriting earlier ones:	576	with later settings overwriting earlier ones:
564		577
565	1. system-wide app-defaults file, either locale-dependent OR global
566	2. app-defaults file in $XAPPLRESDIR	578	1. app-defaults file in $XAPPLRESDIR
		579	2. $HOME/.Xdefaults
567	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	580	3. RESOURCE_MANAGER property on root-window of screen 0
568	4. SCREEN_RESOURCES for the current screen	581	4. SCREEN_RESOURCES property on root-window of the current screen
569	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	582	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
570	6. resources specified via -xrm on the commandline	583	6. resources specified via -xrm on the commandline
571		584
572	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	585	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
573	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	586	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
578	be used. Command-line arguments can be used to override resource	591	be used. Command-line arguments can be used to override resource
579	settings. The following resources are supported (you might want to	592	settings. The following resources are supported (you might want to
580	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	593	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
581	extensions not documented here):	594	extensions not documented here):
582		595
583	=over 4	596	=over
584		597
585	=item B<depth:> I<bitdepth>	598	=item B<depth:> I<bitdepth>
586		599
587	Compile I<xft>: Attempt to find a visual with the given bit depth;	600	Compile I<xft>: Attempt to find a visual with the given bit depth;
588	option B<-depth>.	601	option B<-depth>.
…		…
614	Use the specified colour for the colour value I<n>, where 0-7	627	Use the specified colour for the colour value I<n>, where 0-7
615	corresponds to low-intensity (normal) colours and 8-15 corresponds to	628	corresponds to low-intensity (normal) colours and 8-15 corresponds to
616	high-intensity (bold = bright foreground, blink = bright background)	629	high-intensity (bold = bright foreground, blink = bright background)
617	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	630	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
618	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	631	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
619	names used are listed in the B<COLORS AND GRAPHICS> section.	632	names used are listed in the B<COLOURS AND GRAPHICS> section.
620		633
621	Colours higher than 15 cannot be set using resources (yet), but can be	634	Colours higher than 15 cannot be set using resources (yet), but can be
622	changed using an escape command (see @@RXVT_NAME@@(7)).	635	changed using an escape command (see @@RXVT_NAME@@(7)).
623		636
624	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	637	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
635	=item B<colorUL:> I<colour>	648	=item B<colorUL:> I<colour>
636		649
637	Use the specified colour to display underlined characters when the	650	Use the specified colour to display underlined characters when the
638	foreground colour is the default.	651	foreground colour is the default.
639		652
640	=item B<colorRV:> I<colour>
641
642	Use the specified colour as the background for reverse video characters
643	when OPTION_HC is disabled (--disable-frills).
644
645	=item B<underlineColor:> I<colour>	653	=item B<underlineColor:> I<colour>
646		654
647	If set, use the specified colour as the colour for the underline	655	If set, use the specified colour as the colour for the underline
648	itself. If unset, use the foreground colour.	656	itself. If unset, use the foreground colour.
		657
		658	=item B<highlightColor:> I<colour>
		659
		660	If set, use the specified colour as the background for highlighted
		661	characters. If unset, use reverse video.
		662
		663	=item B<highlightTextColor:> I<colour>
		664
		665	If set and highlightColor is set, use the specified colour as the
		666	foreground for highlighted characters.
649		667
650	=item B<cursorColor:> I<colour>	668	=item B<cursorColor:> I<colour>
651		669
652	Use the specified colour for the cursor. The default is to use the	670	Use the specified colour for the cursor. The default is to use the
653	foreground colour; option B<-cr>.	671	foreground colour; option B<-cr>.
…		…
660		678
661	=item B<reverseVideo:> I<boolean>	679	=item B<reverseVideo:> I<boolean>
662		680
663	B<True>: simulate reverse video by foreground and background colours;	681	B<True>: simulate reverse video by foreground and background colours;
664	option B<-rv>. B<False>: regular screen colours [default]; option	682	option B<-rv>. B<False>: regular screen colours [default]; option
665	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	683	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
666		684
667	=item B<jumpScroll:> I<boolean>	685	=item B<jumpScroll:> I<boolean>
668		686
669	B<True>: specify that jump scrolling should be used. When receiving lots	687	B<True>: specify that jump scrolling should be used. When receiving lots
670	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	688	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
684		702
685	B<False>: specify that everything is to be displayed, even	703	B<False>: specify that everything is to be displayed, even
686	if the refresh is too fast for the human eye to read anything (or the	704	if the refresh is too fast for the human eye to read anything (or the
687	monitor to display anything); option B<+ss>.	705	monitor to display anything); option B<+ss>.
688		706
689	=item B<transparent:> I<boolean>	707	=item B<refreshRate:> I<number>
690		708
691	Turn on/off illusion of a transparent window background.	709	Compile I<frills>: When positive, sets the maximum refreshes per second
692		710	(the default is C<60>). When zero or negative, sets the minimum interval
693	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in	711	between refreshes, negated. That is, positive numbers limit the number
694	future versions.	712	of refreshes per second to that number, similar to a fps limiter in
695		713	games. Zero or negative numbers get negated and directly set the minimum
696	I<Please address all transparency related issues to Sasha Vasko at	714	interval between refreshs, that is, C<10> and C<-0.1> both specify the
697	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>	715	same refresh interval (likewise C<50> and C<0.02>). Fractional values are
		716	supported; option B<-fps>.
698		717
699	=item B<fading:> I<number>	718	=item B<fading:> I<number>
700		719
701	Fade the text by the given percentage when focus is lost; option B<-fade>.	720	Fade the text by the given percentage when focus is lost; option B<-fade>.
702		721
703	=item B<fadeColor:> I<colour>	722	=item B<fadeColor:> I<colour>
704		723
705	Fade to this colour, when fading is used (see B<fading:>). The default	724	Fade to this colour, when fading is used (see B<fading:>). The default
706	colour is black; option B<-fadecolor>.	725	colour is black; option B<-fadecolor>.
707		726
708	=item B<tintColor:> I<colour>
709
710	Tint the transparent background pixmap with the given colour; option
711	B<-tint>.
712
713	=item B<shading:> I<number>
714
715	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
716	in addition to tinting it; option B<-sh>.
717
718	=item B<blendType:> I<string>
719
720	Specify background blending type; option B<-blt>.
721
722	=item B<blurRadius:> I<number>
723
724	Apply gaussian blur with the specified radius to the transparent
725	background image; option B<-blr>.
726
727	=item B<iconFile:> I<file>	727	=item B<iconFile:> I<file>
728		728
729	Set the application icon pixmap; option B<-icon>.	729	Set the application icon pixmap; option B<-icon>.
730		730
731	=item B<scrollColor:> I<colour>	731	=item B<scrollColor:> I<colour>
…		…
739		739
740	=item B<borderColor:> I<colour>	740	=item B<borderColor:> I<colour>
741		741
742	The colour of the border around the text area and between the scrollbar	742	The colour of the border around the text area and between the scrollbar
743	and the text.	743	and the text.
744
745	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
746
747	Use the specified image file for the background and also
748	optionally specify its scaling with a geometry string B<WxH+X+Y>,
749	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
750	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
751	centre (percent). A scale of 0 displays the image with tiling. A scale
752	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
753	an integer number of images in that direction. No image will be magnified
754	beyond 10 times its original size. The maximum permitted scale is 1000.
755	Additional operations can be specified after colon B<:op1:op2...>.
756	Supported operations are:
757
758	tile force background image to be tiled and not scaled. Equivalent to 0x0
759	propscale will scale image keeping proportions
760	auto will scale image to match window size. Equivalent to 100x100
761	hscale will scale image horizontally to the window size
762	vscale will scale image vertically to the window size
763	scale will scale image to match window size
764	root will tile image as if it was a root window background, auto-adjusting
765	whenever terminal window moves
766
767	If used in conjunction with B<-tr> option, the specified pixmap will be
768	blended over transparency image using either alpha-blending, or any
769	other blending type, specified with B<-blt "type"> option.
770
771	=item B<path:> I<path>
772
773	Specify the colon-delimited search path for finding background image files.
774		744
775	=item B<font:> I<fontlist>	745	=item B<font:> I<fontlist>
776		746
777	Select the fonts to be used. This is a comma separated list of font names	747	Select the fonts to be used. This is a comma separated list of font names
778	that are checked in order when trying to find glyphs for characters. The	748	that are checked in order when trying to find glyphs for characters. The
…		…
801	it is named first) and thus defines the character cell grid to be 9 pixels	771	it is named first) and thus defines the character cell grid to be 9 pixels
802	wide and 15 pixels high.	772	wide and 15 pixels high.
803		773
804	The second font is just used to add additional unicode characters not in	774	The second font is just used to add additional unicode characters not in
805	the base font, likewise the third, which is unfortunately non-bold, but	775	the base font, likewise the third, which is unfortunately non-bold, but
806	the bold version of the font does contain less characters, so this is a	776	the bold version of the font does contain fewer characters, so this is a
807	useful supplement.	777	useful supplement.
808		778
809	The third font is an Xft font with aliasing turned off, and the characters	779	The third font is an Xft font with aliasing turned off, and the characters
810	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	780	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
811	contains other characters, but we are not interested in them.	781	contains other characters, but we are not interested in them.
…		…
875		845
876	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	846	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
877	the shell; option B<-ls>. B<False>: start as a normal sub-shell	847	the shell; option B<-ls>. B<False>: start as a normal sub-shell
878	[default]; option B<+ls>.	848	[default]; option B<+ls>.
879		849
		850	=item B<multiClickTime:> I<number>
		851
		852	Specify the maximum time in milliseconds between multi-click select
		853	events. The default is 500 milliseconds; option B<-mc>.
		854
880	=item B<utmpInhibit:> I<boolean>	855	=item B<utmpInhibit:> I<boolean>
881		856
882	B<True>: inhibit writing record into the system log file B<utmp>;	857	B<True>: inhibit writing record into the system log file B<utmp>;
883	option B<-ut>. B<False>: write record into the system log file B<utmp>	858	option B<-ut>. B<False>: write record into the system log file B<utmp>
884	[default]; option B<+ut>.	859	[default]; option B<+ut>.
…		…
901	=item B<scrollstyle:> I<mode>	876	=item B<scrollstyle:> I<mode>
902		877
903	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	878	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
904	the author's favourite.	879	the author's favourite.
905		880
		881	=item B<thickness:> I<number>
		882
		883	Set the scrollbar width in pixels.
		884
906	=item B<scrollBar:> I<boolean>	885	=item B<scrollBar:> I<boolean>
907		886
908	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	887	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
909	disable the scrollbar; option B<+sb>.	888	disable the scrollbar; option B<+sb>.
910		889
…		…
929	B<False>: do not scroll to bottom when tty receives output; option	908	B<False>: do not scroll to bottom when tty receives output; option
930	B<+si>.	909	B<+si>.
931		910
932	=item B<scrollWithBuffer:> I<boolean>	911	=item B<scrollWithBuffer:> I<boolean>
933		912
934	B<True>: scroll with scrollback buffer when tty receives new lines (and	913	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
935	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	914	try to show the same lines) and B<scrollTtyOutput> is False; option
936	with scrollback buffer when tty receives new lines; option B<+sw>.	915	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		916	new lines; option B<+sw>.
937		917
938	=item B<scrollTtyKeypress:> I<boolean>	918	=item B<scrollTtyKeypress:> I<boolean>
939		919
940	B<True>: scroll to bottom when a non-special key is pressed. Special keys	920	B<True>: scroll to bottom when a non-special key is pressed. Special keys
941	are those which are intercepted by rxvt-unicode for special handling and	921	are those which are intercepted by rxvt-unicode for special handling and
942	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	922	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
943	bottom when a non-special key is pressed; option B<+sk>.	923	bottom when a non-special key is pressed; option B<+sk>.
944		924
945	=item B<saveLines:> I<number>	925	=item B<saveLines:> I<number>
946		926
947	Save I<number> lines in the scrollback buffer [default 64]. This	927	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
948	resource is limited on most machines to 65535; option B<-sl>.
949		928
950	=item B<internalBorder:> I<number>	929	=item B<internalBorder:> I<number>
951		930
952	Internal border of I<number> pixels. This resource is limited to 100;	931	Internal border of I<number> pixels. This resource is limited to 100;
953	option B<-b>.	932	option B<-b>.
…		…
997	=item B<cursorBlink:> I<boolean>	976	=item B<cursorBlink:> I<boolean>
998		977
999	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	978	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
1000	option B<-bc>.	979	option B<-bc>.
1001		980
		981	=item B<cursorUnderline:> I<boolean>
		982
		983	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		984	option B<-uc>.
		985
1002	=item B<pointerBlank:> I<boolean>	986	=item B<pointerBlank:> I<boolean>
1003		987
1004	B<True>: blank the pointer when a key is pressed or after a set number	988	B<True>: blank the pointer when a key is pressed or after a set number
1005	of seconds of inactivity. B<False>: the pointer is always visible	989	of seconds of inactivity. B<False>: the pointer is always visible
1006	[default].	990	[default].
…		…
1011		995
1012	=item B<pointerColor2:> I<colour>	996	=item B<pointerColor2:> I<colour>
1013		997
1014	Mouse pointer background colour.	998	Mouse pointer background colour.
1015		999
		1000	=item B<pointerShape:> I<string>
		1001
		1002	Compile I<frills>: Specifies the name of the mouse pointer shape
		1003	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		1004	file for possible values (omit the C<XC_> prefix).
		1005
1016	=item B<pointerBlankDelay:> I<number>	1006	=item B<pointerBlankDelay:> I<number>
1017		1007
1018	Specifies number of seconds before blanking the pointer [default 2]. Use a	1008	Specifies number of seconds before blanking the pointer [default 2]. Use a
1019	large number (e.g. C<987654321>) to effectively disable the timeout.	1009	large number (e.g. C<987654321>) to effectively disable the timeout.
1020		1010
1021	=item B<backspacekey:> I<string>	1011	=item B<backspacekey:> I<string>
1022		1012
1023	The string to send when the backspace key is pressed. If set to B<DEC>	1013	The string to send when the backspace key is pressed. If set to B<DEC>
1024	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	1014	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1025	(code 8) - which can be reversed with the appropriate DEC private mode	1015	(code 8) - which can be reversed with the appropriate DEC private mode
1026	escape sequence.	1016	escape sequence.
1027		1017
1028	=item B<deletekey:> I<string>	1018	=item B<deletekey:> I<string>
1029		1019
…		…
1046		1036
1047	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1037	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1048		1038
1049	=item B<preeditType:> I<style>	1039	=item B<preeditType:> I<style>
1050		1040
1051	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1041	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1052		1042
1053	=item B<inputMethod:> I<name>	1043	=item B<inputMethod:> I<name>
1054		1044
1055	I<name> of inputMethod to use; option B<-im>.	1045	I<name> of inputMethod to use; option B<-im>.
1056		1046
…		…
1074		1064
1075	Change the meaning of triple-click selection with the left mouse	1065	Change the meaning of triple-click selection with the left mouse
1076	button. Instead of selecting a full line it will extend the selection to	1066	button. Instead of selecting a full line it will extend the selection to
1077	the end of the logical line only; option B<-tcw>.	1067	the end of the logical line only; option B<-tcw>.
1078		1068
		1069	=item B<disablePasteBrackets:> I<boolean>
		1070
		1071	Prevent emission of paste bracket sequences; option B<-dpb>.
		1072
1079	=item B<insecure:> I<boolean>	1073	=item B<insecure:> I<boolean>
1080		1074
1081	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1075	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1082	echo arbitrary strings like the icon name or the locale. This could be	1076	echo arbitrary strings like the icon name or the locale. This could be
1083	abused if somebody gets 8-bit-clean access to your display, whether	1077	abused if somebody gets 8-bit-clean access to your display, whether
1084	through a mail client displaying mail bodies unfiltered or through	1078	through a mail client displaying mail bodies unfiltered or through
1085	write(1) or any other means. Therefore, these sequences are disabled by	1079	write(1) or any other means. Therefore, these sequences are disabled by
1086	default. (Note that many other terminals, including xterm, have these	1080	default. (Note that many other terminals, including xterm, have these
…		…
1104		1098
1105	=item B<secondaryScreen:> I<boolean>	1099	=item B<secondaryScreen:> I<boolean>
1106		1100
1107	Turn on/off secondary screen (default enabled).	1101	Turn on/off secondary screen (default enabled).
1108		1102
		1103	=item B<rewrapMode:> I<mode>
		1104
		1105	Sets long line rewrap behaviour on window resize to one of B<auto>
		1106	(default), B<always> or B<never>.
		1107
1109	=item B<secondaryScroll:> I<boolean>	1108	=item B<secondaryScroll:> I<boolean>
1110		1109
1111	Turn on/off secondary screen scroll (default enabled). If this	1110	Turn on/off secondary screen scroll (default enabled). If this
1112	option is enabled, scrolls on the secondary screen will change the	1111	option is enabled, scrolls on the secondary screen will change the
1113	scrollback buffer and, when secondaryScreen is off, switching	1112	scrollback buffer and, when secondaryScreen is off, switching
…		…
1125	Sets the working directory for the shell (or the command specified via	1124	Sets the working directory for the shell (or the command specified via
1126	B<-e>). The I<path> must be an absolute path and it must exist for	1125	B<-e>). The I<path> must be an absolute path and it must exist for
1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1126	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1128	directory will be used; option B<-cd>.	1127	directory will be used; option B<-cd>.
1129		1128
1130	=item B<keysym.>I<sym>: I<string>	1129	=item B<keysym.>I<sym>: I<action>
1131		1130
1132	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1131	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1133	intervening resource name B<keysym.> cannot be omitted.	1132	resource name B<keysym.> cannot be omitted.
1134		1133
1135	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1134	Using this resource, you can map key combinations such as
1136	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1135	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1137	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1136	string than would normally result from that combination, making the
1138	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1137	terminal scroll up or down the way you want it, or any other thing an
1139	B<2>, B<3>, B<4>, B<5>.	1138	extension might provide.
		1139
		1140	The key combination that triggers the action, I<sym>, has the following format:
		1141
		1142	(modifiers-)key
		1143
		1144	Where I<modifiers> can be any combination of the following full or
		1145	abbreviated modifier names:
		1146
		1147	=begin table
		1148
		1149	B<ISOLevel3> B<I>
		1150	B<AppKeypad> B<K>
		1151	B<Control> B<C>
		1152	B<NumLock> B<N>
		1153	B<Shift> B<S>
		1154	B<Meta> B<M> I<or> B<A>
		1155	B<Lock> B<L>
		1156	B<Mod1> B<1>
		1157	B<Mod2> B<2>
		1158	B<Mod3> B<3>
		1159	B<Mod4> B<4>
		1160	B<Mod5> B<5>
		1161
		1162	=end table
1140		1163
1141	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1164	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1142	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1165	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1143	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1166	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1144	current application keymap mode state.	1167	current application keymap mode state.
1145		1168
1146	The spellings of I<key> can be obtained by using B<xev>(1) command or	1169	Due the the large number of modifier combinations, a key mapping will
1147	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1170	match if I<at least> the specified identifiers are being set, and no other
		1171	key mappings with those and more bits are being defined. That means that
		1172	defining a mapping for C<a> will automatically provide definitions for
		1173	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1174	themselves. See the C<builtin:> action, below, for a way to work around
		1175	this when this is a problem.
		1176
		1177	The spelling of I<key> depends on your implementation of X. An easy way to
		1178	find a key name is to use the B<xev>(1) command. You can find a list by
		1179	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1148	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1180	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1149	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1181	value (B<0x0000 - 0xFFFF>).
1150	performed in an exact manner; however, the closest match is assured.
1151		1182
1152	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1183	As with any resource value, the I<action> string may contain backslash
		1184	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1153	number), see RESOURCES in C<man 7 X> for futher details.	1185	number), see RESOURCES in C<man 7 X> for further details.
1154		1186
1155	You can define a range of keysyms in one shot by providing a I<string>	1187	An action starts with an action prefix that selects a certain type
1156	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1188	of action, followed by a colon. An action string without colons is
		1189	interpreted as a literal string to pass to the tty (as if it was
		1190	prefixed with C<string:>).
		1191
		1192	The following action prefixes are known - extensions can provide
		1193	additional prefixes:
		1194
		1195	=over
		1196
		1197	=item string:STRING
		1198
		1199	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1200	then the remaining C<STRING> will be passed to the program running in the
		1201	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1202	string C<echo rm -rf /> followed by a newline:
		1203
		1204	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1205
		1206	This could in theory be used to completely redefine your keymap.
		1207
		1208	In addition, for actions of this type, you can define a range of
		1209	keysyms in one shot by loading the C<keysym-list> perl extension and
		1210	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1157	should be a character not used by the strings.	1211	the delimiter `/' should be a character not used by the strings.
1158		1212
1159	Its usage can be demonstrated by an example:	1213	Its usage can be demonstrated by an example:
1160		1214
1161	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1215	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1162		1216
1163	The above line is equivalent to the following three lines:	1217	The above line is equivalent to the following three lines:
1164		1218
1165	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1219	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1166	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1220	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1167	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1221	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1168		1222
		1223	=item command:STRING
		1224
1169	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1225	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1170	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1226	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1227	the opposite of C<string:> - instead of sending it to the program running
		1228	in the terminal, it will be treated as if it were program output). This is
		1229	most useful to feed command sequences into @@RXVT_NAME@@.
		1230
1171	example the following means "change the current locale to C<zh_CN.GBK>	1231	For example the following means "change the current locale to C<zh_CN.GBK>
1172	when Control-Meta-c is being pressed":	1232	when Control-Meta-c is being pressed":
1173		1233
1174	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1234	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1175		1235
1176	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1236	The following example will map Control-Meta-1 and Control-Meta-2 to
1177	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1237	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1178	manpage. For example, the F<selection> extension (activated via	1238	font-switching at runtime:
1179	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1180		1239
1181	URxvt.keysym.M-C-c: perl:selection:rot13	1240	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1241	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1182		1242
1183	Due the the large number of modifier combinations, a defined key mapping	1243	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1184	will match if at I<at least> the specified identifiers are being set, and	1244	info):
1185	no other key mappings with those and more bits are being defined. That
1186	means that defining a key map for C<a> will automatically provide
1187	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1188	mappings themselves.
1189		1245
1190	Unfortunately, this will override built-in key mappings. For example	1246	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1247	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1248
		1249	=item builtin:
		1250
		1251	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1252	key binding existed for the key combination. The obvious use is to undo
		1253	the effect of existing bindings. The not so obvious use is to reinstate
		1254	bindings when another binding overrides too many modifiers.
		1255
1191	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1256	For example if you overwrite the C<Insert> key you will disable
1192	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1257	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1193	user-defined keymap using the C<builtin:> replacement:	1258	"holes" into the user-defined keymap using the C<builtin:> replacement:
1194		1259
1195	URxvt.keysym.Insert: <my insert key sequence>	1260	URxvt.keysym.Insert: <my insert key sequence>
1196	URxvt.keysym.S-Insert: builtin:	1261	URxvt.keysym.S-Insert: builtin:
1197		1262
1198	The first line defines a mapping for C<Insert> and I<any> combination	1263	The first line defines a mapping for C<Insert> and I<any> combination
1199	of modifiers. The second line re-establishes the default mapping for	1264	of modifiers. The second line re-establishes the default mapping for
1200	C<Shift-Insert>.	1265	C<Shift-Insert>.
1201		1266
1202	The following example will map Control-Meta-1 and Control-Meta-2 to	1267	=item builtin-string:
1203	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1204	font-switching at runtime:
1205		1268
1206	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1269	This action is mainly useful to restore string mappings for keys that
1207	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1270	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1271	difficult to explain - basically, this action will send the string to the
		1272	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1273	action for it.
1208		1274
1209	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1275	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1210	info):	1276	selection when you press C<Shift-Insert>. With the following bindings, it
		1277	would instead emit the (undocumented, but what applications running in the
		1278	terminal might expect) sequence C<ESC [ 2 $> instead:
1211		1279
1212	URxvt.keysym.M-C-3: command:\033[8;25;80t	1280	URxvt.keysym.S-Insert: builtin-string:
1213	URxvt.keysym.M-C-4: command:\033[8;48;110t	1281	URxvt.keysym.C-S-Insert: builtin:
		1282
		1283	The first line disables the paste functionality for that key
		1284	combination, and the second reinstates the default behaviour for
		1285	C<Control-Shift-Insert>, which would otherwise be overridden.
		1286
		1287	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1288	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1289	this:
		1290
		1291	URxvt.keysym.C-M-c: builtin-string:
		1292	URxvt.keysym.C-M-v: builtin-string:
		1293
		1294	=item EXTENSION:STRING
		1295
		1296	An action of this form invokes the action B<STRING>, if any, provided
		1297	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1298	be loaded automatically if necessary.
		1299
		1300	Not all extensions define actions, but popular extensions that do
		1301	include the I<selection> and I<matcher> extensions (documented in their
		1302	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1303	respectively).
		1304
		1305	From the silly examples department, this will rot13-"encrypt"
		1306	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1307	keyboards:
		1308
		1309	URxvt.keysym.M-C-c: selection:rot13
		1310
		1311	=item perl:STRING DEPRECATED
		1312
		1313	This is a deprecated way of invoking commands provided by perl
		1314	extensions. It is still supported, but should not be used anymore.
		1315
		1316	=back
1214		1317
1215	=item B<perl-ext-common>: I<string>	1318	=item B<perl-ext-common>: I<string>
1216		1319
1217	=item B<perl-ext>: I<string>	1320	=item B<perl-ext>: I<string>
1218		1321
1219	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1322	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1220	use in this terminal instance; option B<-pe>.	1323	use in this terminal instance; option B<-pe>.
1221		1324
1222	Extension names can be prefixed with a C<-> sign to prohibit using	1325	Extension names can be prefixed with a C<-> sign to remove them again, in
1223	them. This can be useful to selectively disable some extensions loaded	1326	case they had been specified earlier. This can be useful to selectively
1224	by default, or specified via the C<perl-ext-common> resource. For	1327	disable some extensions loaded by default, or specified via the
1225	example, C<default,-selection> will use all the default extension except	1328	C<perl-ext-common> resource. For example, C<default,-selection> will use
1226	C<selection>.	1329	all the default extensions except C<selection>.
1227		1330
1228	Extension names can also be followed by an argument in angle brackets	1331	To prohibit autoloading of extensions, you can prefix them with C</>,
1229	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1332	which will make urxvt refuse to automatically load them (this can be
1230	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1333	overridden, however, by specifying the extension name again without a
1231	multiple times with different arguments will pass multiple arguments to	1334	prefix, though). This does not prohibit extensions themselves loading
1232	the extension.	1335	other extensions. For example, C<default,/background> will keep the
		1336	C<background> extension from being loaded when a background OSC sequence
		1337	is received.
		1338
		1339	The default set includes the C<selection>, C<option-popup>,
		1340	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1341	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1342	in B<keysym> resources.
		1343
		1344	Any extension such that a corresponding resource is given on the
		1345	command line is automatically appended to B<perl-ext>.
1233		1346
1234	Each extension is looked up in the library directories, loaded if	1347	Each extension is looked up in the library directories, loaded if
1235	necessary, and bound to the current terminal instance.	1348	necessary, and bound to the current terminal instance. When the library
		1349	search path contains multiple extension files of the same name, then the
		1350	first one found will be used.
1236		1351
1237	If both of these resources are the empty string, then the perl	1352	If both of these resources are the empty string, then the perl interpreter
1238	interpreter will not be initialized. The idea behind two options is that	1353	will not be initialized. The rationale for having two options is that
1239	B<perl-ext-common> will be used for extensions that should be available to	1354	B<perl-ext-common> will be used for extensions that should be available to
1240	all instances, while B<perl-ext> is used for specific instances.	1355	all instances, while B<perl-ext> is used for specific instances.
1241		1356
1242	=item B<perl-eval>: I<string>	1357	=item B<perl-eval>: I<string>
1243		1358
…		…
1245	the @@RXVT_NAME@@perl(3) manpage.	1360	the @@RXVT_NAME@@perl(3) manpage.
1246		1361
1247	=item B<perl-lib>: I<path>	1362	=item B<perl-lib>: I<path>
1248		1363
1249	Colon-separated list of additional directories that hold extension	1364	Colon-separated list of additional directories that hold extension
1250	scripts. When looking for extensions specified by the C<perl> resource,	1365	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1251	@@RXVT_NAME@@ will first look in these directories and then in	1366	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1252	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1367	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1253		1368
1254	See the @@RXVT_NAME@@perl(3) manpage.	1369	See the @@RXVT_NAME@@perl(3) manpage.
1255		1370
1256	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1371	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1257		1372
…		…
1261	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1376	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1262		1377
1263	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1378	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1264	for details.	1379	for details.
1265		1380
1266	=item B<searchable-scrollback:> I<keysym>	1381	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1267		1382
1268	Sets the hotkey that starts the incremental scrollback buffer search	1383	This resource is deprecated and will be removed. Use a B<keysym> resource
1269	(default: C<M-s>).	1384	instead, e.g.:
1270		1385
		1386	URxvt.keysym.M-s: searchable-scrollback:start
		1387
1271	=item B<urlLauncher>: I<string>	1388	=item B<url-launcher>: I<string>
1272		1389
1273	Specifies the program to be started with a URL argument. Used by the	1390	Specifies the program to be started with a URL argument. Used by the
1274	C<selection-popup> and C<matcher> perl extensions.	1391	C<selection-popup> and C<matcher> perl extensions.
1275		1392
1276	=item B<transient-for>: I<windowid>	1393	=item B<transient-for>: I<windowid>
…		…
1279		1396
1280	=item B<override-redirect>: I<boolean>	1397	=item B<override-redirect>: I<boolean>
1281		1398
1282	Compile I<frills>: Sets override-redirect for the terminal window, making	1399	Compile I<frills>: Sets override-redirect for the terminal window, making
1283	it almost invisible to window managers; option B<-override-redirect>.	1400	it almost invisible to window managers; option B<-override-redirect>.
		1401
		1402	=item B<iso14755:> I<boolean>
		1403
		1404	Turn on/off ISO 14755 (default enabled).
1284		1405
1285	=item B<iso14755_52:> I<boolean>	1406	=item B<iso14755_52:> I<boolean>
1286		1407
1287	Turn on/off ISO 14755 5.2 mode (default enabled).	1408	Turn on/off ISO 14755 5.2 mode (default enabled).
1288		1409
…		…
1316	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1437	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1317		1438
1318	The behaviour of text selection and insertion/pasting mechanism is similar	1439	The behaviour of text selection and insertion/pasting mechanism is similar
1319	to I<xterm>(1).	1440	to I<xterm>(1).
1320		1441
1321	=over 4	1442	=over
1322		1443
1323	=item B<Selecting>:	1444	=item B<Selecting>:
1324		1445
1325	Left click at the beginning of the region, drag to the end of the region	1446	Left click at the beginning of the region, drag to the end of the region
1326	and release; Right click to extend the marked region; Left double-click	1447	and release; Right click to extend the marked region; Left double-click
…		…
1341	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1462	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1342		1463
1343	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1464	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1344	inserted too.	1465	inserted too.
1345		1466
		1467	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1468	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1469	binding causes the value of the internal selection to be copied to the
		1470	CLIPBOARD selection, while the second binding causes the value of the
		1471	CLIPBOARD selection to be inserted.
		1472
1346	=back	1473	=back
1347		1474
1348	=head1 CHANGING FONTS	1475	=head1 CHANGING FONTS
1349		1476
1350	Changing fonts (or font sizes, respectively) via the keypad is not yet	1477	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1367	and character codes using the keyboard. It consists of 4 parts. The	1494	and character codes using the keyboard. It consists of 4 parts. The
1368	first part is available if rxvt-unicode has been compiled with	1495	first part is available if rxvt-unicode has been compiled with
1369	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1496	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1370	with C<--enable-iso14755>.	1497	with C<--enable-iso14755>.
1371		1498
1372	=over 4	1499	=over
1373		1500
1374	=item * 5.1: Basic method	1501	=item * 5.1: Basic method
1375		1502
1376	This allows you to enter unicode characters using their hexcode.	1503	This allows you to enter unicode characters using their hexcode.
1377		1504
…		…
1431	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1558	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1432	it can be seen via the I<who(1)> command, and can accept messages. To	1559	it can be seen via the I<who(1)> command, and can accept messages. To
1433	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1560	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1434	on some systems or setgid to root or to some other group on others.	1561	on some systems or setgid to root or to some other group on others.
1435		1562
1436	=head1 COLORS AND GRAPHICS	1563	=head1 COLOURS AND GRAPHICS
1437		1564
1438	In addition to the default foreground and background colours,	1565	In addition to the default foreground and background colours,
1439	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1566	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1440	high-intensity bold/blink versions of the same). Here is a list of the	1567	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1441	colours with their names.	1568	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1569	cube plus a 8 (24) colour greyscale ramp.
		1570
		1571	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1572	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1573	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1574	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1575	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1576	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1577	use many similar 24-bit colours. It's typically not a problem in common
		1578	scenarios.
		1579
		1580	Here is a list of the ANSI colours with their names.
1442		1581
1443	=begin table	1582	=begin table
1444		1583
1445	B<color0> (black) = Black	1584	B<color0> (black) = Black
1446	B<color1> (red) = Red3	1585	B<color1> (red) = Red3
…		…
1466	It is also possible to specify the colour values of B<foreground>,	1605	It is also possible to specify the colour values of B<foreground>,
1467	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1606	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1468	a number 0-15, as a convenient shorthand to reference the colour name of	1607	a number 0-15, as a convenient shorthand to reference the colour name of
1469	color0-color15.	1608	color0-color15.
1470		1609
1471	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1610	The following text gives values for the standard 88 colour mode (and
1472	additional 72 colours. The first 64 of those (with indices 16 to 79)	1611	values for the 256 colour mode in parentheses).
1473	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1474	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1475		1612
		1613	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1614
		1615	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1616	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1617
		1618	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1619	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1620	the RGB cube.
		1621
1476	Together, all those colours implement the 88 colour xterm colours. Only	1622	Together, all those colours implement the 88 (256) colour xterm
1477	the first 16 can be changed using resources currently, the rest can only	1623	colours. Only the first 16 can be changed using resources currently, the
1478	be changed via command sequences ("escape codes").	1624	rest can only be changed via command sequences ("escape codes").
		1625
		1626	Applications are advised to use terminfo or command sequences to discover
		1627	number and RGB values of all colours (yes, you can query this...).
1479		1628
1480	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1629	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1481	always swapping the foreground/background colours. This is in contrast to	1630	always swapping the foreground/background colours. This is in contrast to
1482	I<xterm>(1) where the colours are only swapped if they have not otherwise	1631	I<xterm>(1) where the colours are only swapped if they have not otherwise
1483	been specified. For example,	1632	been specified. For example,
1484		1633
1485	=over 4
1486
1487	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1634	@@RXVT_NAME@@ -fg Black -bg White -rv
1488		1635
1489	would yield White on Black, while on I<xterm>(1) it would yield Black	1636	would yield White on Black, while on I<xterm>(1) it would yield Black on
1490	on White.	1637	White.
1491
1492	=back
1493		1638
1494	=head2 ALPHA CHANNEL SUPPORT	1639	=head2 ALPHA CHANNEL SUPPORT
1495		1640
1496	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1641	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1497	their act together, rxvt-unicode will do it's own alpha channel management:	1642	their act together, rxvt-unicode will do its own alpha channel management:
1498		1643
1499	You can prefix any color with an opaquenes percentage enclosed in	1644	You can prefix any colour with an opaqueness percentage enclosed in
1500	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1645	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1501	(0-100) that specifies the opacity of the color, where C<0> is completely	1646	(0-100) that specifies the opacity of the colour, where C<0> is completely
1502	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1647	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1503	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1648	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1504	is the recommended format to specify transparency values, and works with	1649	is the recommended format to specify transparency values, and works with
1505	all ways to specify a colour.	1650	all ways to specify a colour.
1506		1651
…		…
1539		1684
1540	=head1 ENVIRONMENT	1685	=head1 ENVIRONMENT
1541		1686
1542	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1687	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1543		1688
1544	=over 4	1689	=over
1545		1690
1546	=item B<TERM>	1691	=item B<TERM>
1547		1692
1548	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1693	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1549	resources or on the command line.	1694	resources or on the command line.
…		…
1584		1729
1585	=item B<SHELL>	1730	=item B<SHELL>
1586		1731
1587	The shell to be used for command execution, defaults to C</bin/sh>.	1732	The shell to be used for command execution, defaults to C</bin/sh>.
1588		1733
1589	=item B<RXVT_SOCKET>	1734	=item B<RXVT_SOCKET> [I<sic>]
1590		1735
1591	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1736	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1592	@@RXVT_NAME@@d(1).	1737	@@RXVT_NAME@@d(1).
1593		1738
1594	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1739	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1740
		1741	=item B<URXVT_PERL_LIB>
		1742
		1743	Additional F<:>-separated library search path for perl extensions. Will be
		1744	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1745	directory.
		1746
		1747	=item B<URXVT_PERL_VERBOSITY>
		1748
		1749	See L<@@RXVT_NAME@@perl>(3).
1595		1750
1596	=item B<HOME>	1751	=item B<HOME>
1597		1752
1598	Used to locate the default directory for the unix domain socket for	1753	Used to locate the default directory for the unix domain socket for
1599	daemon communications and to locate various resource files (such as	1754	daemon communications and to locate various resource files (such as
1600	C<.Xdefaults>)	1755	C<.Xdefaults>)
1601		1756
1602	=item B<XAPPLRESDIR>	1757	=item B<XAPPLRESDIR>
1603		1758
1604	Directory where various X resource files are being located.	1759	Directory where application-specific X resource files are located.
1605		1760
1606	=item B<XENVIRONMENT>	1761	=item B<XENVIRONMENT>
1607		1762
1608	If set and accessible, gives the name of a X resource file to be loaded by	1763	If set and accessible, gives the name of a X resource file to be loaded by
1609	@@RXVT_NAME@@.	1764	@@RXVT_NAME@@.
1610		1765
1611	=back	1766	=back
1612		1767
1613	=head1 FILES	1768	=head1 FILES
1614		1769
1615	=over 4	1770	=over
1616		1771
1617	=item B</usr/lib/X11/rgb.txt>	1772	=item B</usr/lib/X11/rgb.txt>
1618		1773
1619	Color names.	1774	Colour names.
1620		1775
1621	=back	1776	=back
1622		1777
1623	=head1 SEE ALSO	1778	=head1 SEE ALSO
1624		1779
		1780	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1625	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1781	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1626		1782
1627	=head1 CURRENT PROJECT COORDINATOR	1783	=head1 CURRENT PROJECT COORDINATOR
1628		1784
1629	=over 4	1785	=over
1630		1786
1631	=item Project Coordinator	1787	=item Project Coordinator
1632		1788
1633	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1789	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1634		1790
1635	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1791	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1636		1792
1637	=back	1793	=back
1638		1794
1639	=head1 AUTHORS	1795	=head1 AUTHORS
1640		1796
1641	=over 4	1797	=over
1642		1798
1643	=item John Bovey	1799	=item John Bovey
1644		1800
1645	University of Kent, 1992, wrote the original Xvt.	1801	University of Kent, 1992, wrote the original Xvt.
1646		1802
1647	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1803	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1648		1804
1649	very heavily modified Xvt and came up with Rxvt	1805	very heavily modified Xvt and came up with Rxvt
1650		1806
1651	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1807	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1652		1808
1653	wrote the Greek Keyboard Input (no longer in code)	1809	wrote the Greek Keyboard Input (no longer in code)
1654		1810
1655	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1811	=item mj olesen <olesen@me.QueensU.CA>
1656		1812
1657	Wrote the menu system.	1813	Wrote the menu system.
1658		1814
1659	Project Coordinator (changes.txt 2.11 to 2.21)	1815	Project Coordinator (changes.txt 2.11 to 2.21)
1660		1816
1661	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1817	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1662		1818
1663	Project Coordinator (changes.txt 2.21a to 2.4.5)	1819	Project Coordinator (changes.txt 2.21a to 2.4.5)
1664		1820
1665	=item Geoff Wing L<< <gcw@pobox.com> >>	1821	=item Geoff Wing <gcw@pobox.com>
1666		1822
1667	Rewrote screen display and text selection routines.	1823	Rewrote screen display and text selection routines.
1668		1824
1669	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1825	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1670		1826
1671	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1827	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1672		1828
1673	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1829	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1674	extension, random hacks, numerous bugfixes and extensions.	1830	extension, random hacks, numerous bugfixes and extensions.
1675		1831
1676	Project Coordinator (Changes 1.0 -)	1832	Project Coordinator (Changes 1.0 -)
1677		1833
1678	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1834	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1679		1835
1680	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1836	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1681		1837
1682	=back	1838	=back
1683		1839

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.168 by root, Tue Nov 4 11:03:29 2008 UTC vs. Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.168 by root, Tue Nov 4 11:03:29 2008 UTC vs.
Revision 1.260 by root, Fri Dec 23 21:46:46 2022 UTC