[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.154 by ayin, Fri Dec 14 09:06:36 2007 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
95	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
96		96
97	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
98	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
99	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
106	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
107		118
108	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
109		120
110	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
117		128
118	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
119		130
120	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
121		132
122	=item B<-tr>\|B<+tr>	133	=item B<-fps> I<number>
123		134
124	Turn on/off illusion of a transparent window background; resource B<transparent>.	135	Compile I<frills>: Set the refresh interval (in frames per second or
125		136	negative seconds); resource B<refreshRate>.
126	B<-ip> is still accepted as an obsolete alias but will be removed in
127	future versions.
128
129	I<Please address all transparency related issues to Sasha Vasko at
130	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
131		137
132	=item B<-fade> I<number>	138	=item B<-fade> I<number>
133		139
134	Fade the text by the given percentage when focus is lost. Small values	140	Fade the text by the given percentage when focus is lost. Small values
135	fade a little only, 100 completely replaces all colours by the fade	141	fade a little only, 100 completely replaces all colours by the fade
…		…
138	=item B<-fadecolor> I<colour>	144	=item B<-fadecolor> I<colour>
139		145
140	Fade to this colour when fading is used (see B<-fade>). The default colour	146	Fade to this colour when fading is used (see B<-fade>). The default colour
141	is opaque black. resource B<fadeColor>.	147	is opaque black. resource B<fadeColor>.
142		148
143	=item B<-tint> I<colour>	149	=item B<-icon> I<file>
144		150
145	Tint the transparent background pixmap with the given colour when	151	Compile I<pixbuf>: Use the specified image as application icon. This
146	transparency is enabled with B<-tr>. This only works for	152	is used by many window managers, taskbars and pagers to represent the
147	non-tiled backgrounds, currently. See also the B<-sh> option that can be	153	application window; resource I<iconFile>.
148	used to brighten or darken the image in addition to tinting it.
149	Please note that certain tint colours can be applied on the server-side,
150	thus yielding performance gain of two orders of magnitude. These colours are:
151	blue, red, green, cyan, magenta, yellow, and those close to them. Also
152	pure black and pure white colors essentially mean no tinting; resource
153	I<tintColor>. Example:
154
155	@@RXVT_NAME@@ -tr -tint blue -sh 40
156
157	=item B<-sh> I<number>
158
159	Darken (0 .. 100) or lighten (100 .. 200) the transparent
160	background image in addition to (or instead of) tinting it;
161	resource I<shading>.
162
163	=item B<-blt> I<string>
164
165	Specify background blending type. If background pixmap is specified
166	at the same time as transparency - such pixmap will be blended over
167	transparency image, using method specified. Supported values are :
168	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
169	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
170	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
171	alpha-blending. Compile I<afterimage>; resource I<blendType>.
172
173	=item B<-blr> I<HxV>
174
175	Apply Gaussian Blur with the specified radii to the transparent
176	background image. If single number is specified - both vertical and
177	horizontal radii are considered to be the same. Setting one of the
178	radii to 1 and another to a large number creates interesting effects
179	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
180	resource I<blurRadius>.
181		154
182	=item B<-bg> I<colour>	155	=item B<-bg> I<colour>
183		156
184	Window background colour; resource B<background>.	157	Window background colour; resource B<background>.
185		158
186	=item B<-fg> I<colour>	159	=item B<-fg> I<colour>
187		160
188	Window foreground colour; resource B<foreground>.	161	Window foreground colour; resource B<foreground>.
189
190	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
191
192	Compile I<afterimage>: Specify image file for the background and also
193	optionally specify its scaling with a geometry string. Note you may need to
194	add quotes to avoid special shell interpretation of the C<;> in the
195	command-line; for more details see resource B<backgroundPixmap>.
196		162
197	=item B<-cr> I<colour>	163	=item B<-cr> I<colour>
198		164
199	The cursor colour; resource B<cursorColor>.	165	The cursor colour; resource B<cursorColor>.
200		166
…		…
259		225
260	=item B<-ls>\|B<+ls>	226	=item B<-ls>\|B<+ls>
261		227
262	Start as a login-shell/sub-shell; resource B<loginShell>.	228	Start as a login-shell/sub-shell; resource B<loginShell>.
263		229
		230	=item B<-mc> I<milliseconds>
		231
		232	Specify the maximum time between multi-click selections.
		233
264	=item B<-ut>\|B<+ut>	234	=item B<-ut>\|B<+ut>
265		235
266	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	236	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
267	B<utmpInhibit>.	237	B<utmpInhibit>.
268		238
…		…
272	B<visualBell>.	242	B<visualBell>.
273		243
274	=item B<-sb>\|B<+sb>	244	=item B<-sb>\|B<+sb>
275		245
276	Turn on/off scrollbar; resource B<scrollBar>.	246	Turn on/off scrollbar; resource B<scrollBar>.
		247
		248	=item B<-sr>\|B<+sr>
		249
		250	Put scrollbar on right/left; resource B<scrollBar_right>.
		251
		252	=item B<-st>\|B<+st>
		253
		254	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		255	resource B<scrollBar_floating>.
277		256
278	=item B<-si>\|B<+si>	257	=item B<-si>\|B<+si>
279		258
280	Turn on/off scroll-to-bottom on TTY output inhibit; resource	259	Turn on/off scroll-to-bottom on TTY output inhibit; resource
281	B<scrollTtyOutput> has opposite effect.	260	B<scrollTtyOutput> has opposite effect.
…		…
288	=item B<-sw>\|B<+sw>	267	=item B<-sw>\|B<+sw>
289		268
290	Turn on/off scrolling with the scrollback buffer as new lines appear.	269	Turn on/off scrolling with the scrollback buffer as new lines appear.
291	This only takes effect if B<-si> is also given; resource	270	This only takes effect if B<-si> is also given; resource
292	B<scrollWithBuffer>.	271	B<scrollWithBuffer>.
293
294	=item B<-sr>\|B<+sr>
295
296	Put scrollbar on right/left; resource B<scrollBar_right>.
297
298	=item B<-st>\|B<+st>
299
300	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
301	resource B<scrollBar_floating>.
302		272
303	=item B<-ptab>\|B<+ptab>	273	=item B<-ptab>\|B<+ptab>
304		274
305	If enabled (default), "Horizontal Tab" characters are being stored as	275	If enabled (default), "Horizontal Tab" characters are being stored as
306	actual wide characters in the screen buffer, which makes it possible to	276	actual wide characters in the screen buffer, which makes it possible to
…		…
310		280
311	=item B<-bc>\|B<+bc>	281	=item B<-bc>\|B<+bc>
312		282
313	Blink the cursor; resource B<cursorBlink>.	283	Blink the cursor; resource B<cursorBlink>.
314		284
		285	=item B<-uc>\|B<+uc>
		286
		287	Make the cursor underlined; resource B<cursorUnderline>.
		288
315	=item B<-iconic>	289	=item B<-iconic>
316		290
317	Start iconified, if the window manager supports that option.	291	Start iconified, if the window manager supports that option.
318	Alternative form is B<-ic>.	292	Alternative form is B<-ic>.
319		293
…		…
335		309
336	=item B<-bl>	310	=item B<-bl>
337		311
338	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	312	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
339	if honoured by the WM, the rxvt-unicode window will not have window	313	if honoured by the WM, the rxvt-unicode window will not have window
340	decorations; resource B<borderLess>.	314	decorations; resource B<borderLess>. If the window manager does not
		315	support MWM hints (e.g. kwin), enables override-redirect mode.
341		316
342	=item B<-override-redirect>	317	=item B<-override-redirect>
343		318
344	Compile I<frills>: Sets override-redirect on the window; resource	319	Compile I<frills>: Sets override-redirect on the window; resource
345	B<override-redirect>.	320	B<override-redirect>.
		321
		322	=item B<-dockapp>
		323
		324	Sets the initial state of the window to WithdrawnState, which makes
		325	window managers that support this extension treat it as a dockapp.
346		326
347	=item B<-sbg>	327	=item B<-sbg>
348		328
349	Compile I<frills>: Disable the usage of the built-in block graphics/line	329	Compile I<frills>: Disable the usage of the built-in block graphics/line
350	drawing characters and just rely on what the specified fonts provide. Use	330	drawing characters and just rely on what the specified fonts provide. Use
…		…
354	=item B<-lsp> I<number>	334	=item B<-lsp> I<number>
355		335
356	Compile I<frills>: Lines (pixel height) to insert between each row of	336	Compile I<frills>: Lines (pixel height) to insert between each row of
357	the display. Useful to work around font rendering problems; resource	337	the display. Useful to work around font rendering problems; resource
358	B<lineSpace>.	338	B<lineSpace>.
		339
		340	=item B<-letsp> I<number>
		341
		342	Compile I<frills>: Amount to adjust the computed character width by
		343	to control overall letter spacing. Negative values will tighten up the
		344	letter spacing, positive values will space letters out more. Useful to
		345	work around odd font metrics; resource B<letterSpace>.
359		346
360	=item B<-tn> I<termname>	347	=item B<-tn> I<termname>
361		348
362	This option specifies the name of the terminal type to be set in the	349	This option specifies the name of the terminal type to be set in the
363	B<TERM> environment variable. This terminal type must exist in the	350	B<TERM> environment variable. This terminal type must exist in the
…		…
398	=item B<-pt> I<style>	385	=item B<-pt> I<style>
399		386
400	Compile I<XIM>: input style for input method; B<OverTheSpot>,	387	Compile I<XIM>: input style for input method; B<OverTheSpot>,
401	B<OffTheSpot>, B<Root>; resource B<preeditType>.	388	B<OffTheSpot>, B<Root>; resource B<preeditType>.
402		389
		390	If the perl extension C<xim-onthespot> is used (which is the default),
		391	then additionally the C<OnTheSpot> preedit type is available.
		392
403	=item B<-im> I<text>	393	=item B<-im> I<text>
404		394
405	Compile I<XIM>: input method name. resource B<inputMethod>.	395	Compile I<XIM>: input method name. resource B<inputMethod>.
406		396
407	=item B<-imlocale> I<string>	397	=item B<-imlocale> I<string>
…		…
421	Change the meaning of triple-click selection with the left mouse	411	Change the meaning of triple-click selection with the left mouse
422	button. Only effective when the original (non-perl) selection code is	412	button. Only effective when the original (non-perl) selection code is
423	in-use. Instead of selecting a full line it will extend the selection to	413	in-use. Instead of selecting a full line it will extend the selection to
424	the end of the logical line only. resource B<tripleclickwords>.	414	the end of the logical line only. resource B<tripleclickwords>.
425		415
		416	=item B<-dpb>\|B<+dpb>
		417
		418	Compile frills: Disable (or enable) emitting bracketed paste mode
		419	sequences (default enabled). Bracketed paste mode allows programs
		420	to detect when something is pasted. Since more and more programs
		421	abuse this, these sequences can be disabled. The command sequences to
		422	enable and query paste mode will still work, but the actual bracket
		423	sequences will no longer be emitted. You can also toggle this from the
		424	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		425
426	=item B<-insecure>	426	=item B<-insecure>
427		427
428	Enable "insecure" mode, which currently enables most of the escape	428	Enable "insecure" mode, which currently enables most of the escape
429	sequences that echo strings. See the resource B<insecure> for more	429	sequences that echo strings. See the resource B<insecure> for more
430	info.	430	info.
…		…
442		442
443	=item B<-ssr>\|B<+ssr>	443	=item B<-ssr>\|B<+ssr>
444		444
445	Turn on/off secondary screen scroll (default enabled); resource	445	Turn on/off secondary screen scroll (default enabled); resource
446	B<secondaryScroll>.	446	B<secondaryScroll>.
		447
		448	=item B<-rm> I<mode>
		449
		450	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		451	to one of B<auto> (the default), B<always> or B<never>. The latter two
		452	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		453	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		454	B<rewrapMode>.
447		455
448	=item B<-hold>\|B<+hold>	456	=item B<-hold>\|B<+hold>
449		457
450	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	458	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
451	will not immediately destroy its window when the program executed within	459	will not immediately destroy its window when the program executed within
452	it exits. Instead, it will wait till it is being killed or closed by the	460	it exits. Instead, it will wait till it is being killed or closed by the
453	user; resource B<hold>.	461	user; resource B<hold>.
		462
		463	=item B<-cd> I<path>
		464
		465	Sets the working directory for the shell (or the command specified via
		466	B<-e>). The I<path> must be an absolute path and it must exist for
		467	@@RXVT_NAME@@ to start; resource B<chdir>.
454		468
455	=item B<-xrm> I<string>	469	=item B<-xrm> I<string>
456		470
457	Works like the X Toolkit option of the same name, by adding the I<string>	471	Works like the X Toolkit option of the same name, by adding the I<string>
458	as if it were specified in a resource file. Resource values specified this	472	as if it were specified in a resource file. Resource values specified this
…		…
524		538
525	# now communicate with rxvt	539	# now communicate with rxvt
526	my $slave = $pty->slave;	540	my $slave = $pty->slave;
527	while (<$slave>) { print $slave "got <$_>\n" }	541	while (<$slave>) { print $slave "got <$_>\n" }
528		542
		543	Note that, despite what the name might imply, the file descriptor does not
		544	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		545	domain or tcp socket). While tty operations cannot be done in this case,
		546	B<@@RXVT_NAME@@> can still be remote controlled with it:
		547
		548	use Socket;
		549	use Fcntl;
		550
		551	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		552	fcntl $slave, Fcntl::F_SETFD, 0;
		553	system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
		554	close $slave;
		555
		556	syswrite $URXVT, "Type a secret password: ";
		557	my $secret = do { local $/ = "\r"; <$URXVT> };
		558	print "Not so secret anymore: $secret\n";
		559
529	=item B<-pe> I<string>	560	=item B<-pe> I<string>
530		561
531	Comma-separated list of perl extension scripts to use (or not to use) in	562	Comma-separated list of perl extension scripts to use (or not to use) in
532	this terminal instance. See resource B<perl-ext> for details.	563	this terminal instance. See resource B<perl-ext> for details.
533		564
…		…
542	You can set and change the resources using X11 tools like B<xrdb>. Many	573	You can set and change the resources using X11 tools like B<xrdb>. Many
543	distribution do also load settings from the B<~/.Xresources> file when X	574	distribution do also load settings from the B<~/.Xresources> file when X
544	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	575	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
545	with later settings overwriting earlier ones:	576	with later settings overwriting earlier ones:
546		577
547	1. system-wide app-defaults file, either locale-dependent OR global
548	2. app-defaults file in $XAPPLRESDIR	578	1. app-defaults file in $XAPPLRESDIR
		579	2. $HOME/.Xdefaults
549	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	580	3. RESOURCE_MANAGER property on root-window of screen 0
550	4. SCREEN_RESOURCES for the current screen	581	4. SCREEN_RESOURCES property on root-window of the current screen
551	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	582	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
552	6. resources specified via -xrm on the commandline	583	6. resources specified via -xrm on the commandline
553		584
554	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	585	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
555	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	586	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
560	be used. Command-line arguments can be used to override resource	591	be used. Command-line arguments can be used to override resource
561	settings. The following resources are supported (you might want to	592	settings. The following resources are supported (you might want to
562	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	593	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
563	extensions not documented here):	594	extensions not documented here):
564		595
565	=over 4	596	=over
566		597
567	=item B<depth:> I<bitdepth>	598	=item B<depth:> I<bitdepth>
568		599
569	Compile I<xft>: Attempt to find a visual with the given bit depth;	600	Compile I<xft>: Attempt to find a visual with the given bit depth;
570	option B<-depth>.	601	option B<-depth>.
		602
		603	=item B<buffered:> I<boolean>
		604
		605	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		606	On some card/driver combination enabling it slightly decreases
		607	performance, on most it greatly helps it. The slowdown is small, so it
		608	should normally be enabled.
571		609
572	=item B<geometry:> I<geom>	610	=item B<geometry:> I<geom>
573		611
574	Create the window with the specified X window geometry [default 80x24];	612	Create the window with the specified X window geometry [default 80x24];
575	option B<-geometry>.	613	option B<-geometry>.
…		…
589	Use the specified colour for the colour value I<n>, where 0-7	627	Use the specified colour for the colour value I<n>, where 0-7
590	corresponds to low-intensity (normal) colours and 8-15 corresponds to	628	corresponds to low-intensity (normal) colours and 8-15 corresponds to
591	high-intensity (bold = bright foreground, blink = bright background)	629	high-intensity (bold = bright foreground, blink = bright background)
592	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	630	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
593	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	631	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
594	names used are listed in the B<COLORS AND GRAPHICS> section.	632	names used are listed in the B<COLOURS AND GRAPHICS> section.
595		633
596	Colours higher than 15 cannot be set using resources (yet), but can be	634	Colours higher than 15 cannot be set using resources (yet), but can be
597	changed using an escape command (see @@RXVT_NAME@@(7)).	635	changed using an escape command (see @@RXVT_NAME@@(7)).
598		636
599	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	637	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
610	=item B<colorUL:> I<colour>	648	=item B<colorUL:> I<colour>
611		649
612	Use the specified colour to display underlined characters when the	650	Use the specified colour to display underlined characters when the
613	foreground colour is the default.	651	foreground colour is the default.
614		652
615	=item B<colorRV:> I<colour>
616
617	Use the specified colour as the background for reverse video characters
618	when OPTION_HC is disabled (--disable-frills).
619
620	=item B<underlineColor:> I<colour>	653	=item B<underlineColor:> I<colour>
621		654
622	If set, use the specified colour as the colour for the underline	655	If set, use the specified colour as the colour for the underline
623	itself. If unset, use the foreground colour.	656	itself. If unset, use the foreground colour.
		657
		658	=item B<highlightColor:> I<colour>
		659
		660	If set, use the specified colour as the background for highlighted
		661	characters. If unset, use reverse video.
		662
		663	=item B<highlightTextColor:> I<colour>
		664
		665	If set and highlightColor is set, use the specified colour as the
		666	foreground for highlighted characters.
624		667
625	=item B<cursorColor:> I<colour>	668	=item B<cursorColor:> I<colour>
626		669
627	Use the specified colour for the cursor. The default is to use the	670	Use the specified colour for the cursor. The default is to use the
628	foreground colour; option B<-cr>.	671	foreground colour; option B<-cr>.
…		…
635		678
636	=item B<reverseVideo:> I<boolean>	679	=item B<reverseVideo:> I<boolean>
637		680
638	B<True>: simulate reverse video by foreground and background colours;	681	B<True>: simulate reverse video by foreground and background colours;
639	option B<-rv>. B<False>: regular screen colours [default]; option	682	option B<-rv>. B<False>: regular screen colours [default]; option
640	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	683	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
641		684
642	=item B<jumpScroll:> I<boolean>	685	=item B<jumpScroll:> I<boolean>
643		686
644	B<True>: specify that jump scrolling should be used. When receiving lots	687	B<True>: specify that jump scrolling should be used. When receiving lots
645	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	688	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
659		702
660	B<False>: specify that everything is to be displayed, even	703	B<False>: specify that everything is to be displayed, even
661	if the refresh is too fast for the human eye to read anything (or the	704	if the refresh is too fast for the human eye to read anything (or the
662	monitor to display anything); option B<+ss>.	705	monitor to display anything); option B<+ss>.
663		706
664	=item B<transparent:> I<boolean>	707	=item B<refreshRate:> I<number>
665		708
666	Turn on/off illusion of a transparent window background.	709	Compile I<frills>: When positive, sets the maximum refreshes per second
667		710	(the default is C<60>). When zero or negative, sets the minimum interval
668	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in	711	between refreshes, negated. That is, positive numbers limit the number
669	future versions.	712	of refreshes per second to that number, similar to a fps limiter in
670		713	games. A negative number gets negated and directly sets the minimum
671	I<Please address all transparency related issues to Sasha Vasko at	714	interval between refreshes, that is, C<10> and C<-0.1> both specify
672	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>	715	the same refresh interval (likewise C<50> and C<0.02>). Finally, zero
		716	makes @@RXVT_NAME@@ refresh as fast as possible. Fractional values are
		717	supported; option B<-fps>.
673		718
674	=item B<fading:> I<number>	719	=item B<fading:> I<number>
675		720
676	Fade the text by the given percentage when focus is lost; option B<-fade>.	721	Fade the text by the given percentage when focus is lost; option B<-fade>.
677		722
678	=item B<fadeColor:> I<colour>	723	=item B<fadeColor:> I<colour>
679		724
680	Fade to this colour, when fading is used (see B<fading:>). The default	725	Fade to this colour, when fading is used (see B<fading:>). The default
681	colour is black; option B<-fadecolor>.	726	colour is black; option B<-fadecolor>.
682		727
683	=item B<tintColor:> I<colour>	728	=item B<iconFile:> I<file>
684		729
685	Tint the transparent background pixmap with the given colour; option	730	Set the application icon pixmap; option B<-icon>.
686	B<-tint>.
687
688	=item B<shading:> I<number>
689
690	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
691	in addition to tinting it; option B<-sh>.
692
693	=item B<blendType:> I<string>
694
695	Specify background blending type; option B<-blt>.
696
697	=item B<blurRadius:> I<number>
698
699	Apply Gaussian Blurr with the specified radius to the transparent
700	background image; option B<-blr>.
701		731
702	=item B<scrollColor:> I<colour>	732	=item B<scrollColor:> I<colour>
703		733
704	Use the specified colour for the scrollbar [default #B2B2B2].	734	Use the specified colour for the scrollbar [default #B2B2B2].
705		735
…		…
710		740
711	=item B<borderColor:> I<colour>	741	=item B<borderColor:> I<colour>
712		742
713	The colour of the border around the text area and between the scrollbar	743	The colour of the border around the text area and between the scrollbar
714	and the text.	744	and the text.
715
716	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
717
718	Use the specified image file for the background and also
719	optionally specify its scaling with a geometry string B<WxH+X+Y>,
720	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
721	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
722	centre (percent). A scale of 0 displays the image with tiling. A scale
723	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
724	an integer number of images in that direction. No image will be magnified
725	beyond 10 times its original size. The maximum permitted scale is 1000.
726	Additional operations can be specified after colon B<:op1:op2...>.
727	Supported operations are:
728
729	tile force background image to be tiled and not scaled. Equivalent to 0x0,
730	propscale will scale image keeping proportions,
731	auto will scale image to match window size. Equivalent to 100x100;
732	hscale will scale image horizontally to the window size;
733	vscale will scale image vertically to the window size;
734	scale will scale image to match window size;
735	root will tile image as if it was a root window background, auto-adjusting
736	whenever terminal window moves.
737
738	If used in conjunction with B<-tr> option, the specified pixmap will be
739	blended over transparency image using either alpha-blending, or any
740	other blending type, specified with B<-blt "type"> option.
741
742	=item B<path:> I<path>
743
744	Specify the colon-delimited search path for finding background image files.
745		745
746	=item B<font:> I<fontlist>	746	=item B<font:> I<fontlist>
747		747
748	Select the fonts to be used. This is a comma separated list of font names	748	Select the fonts to be used. This is a comma separated list of font names
749	that are checked in order when trying to find glyphs for characters. The	749	that are checked in order when trying to find glyphs for characters. The
…		…
772	it is named first) and thus defines the character cell grid to be 9 pixels	772	it is named first) and thus defines the character cell grid to be 9 pixels
773	wide and 15 pixels high.	773	wide and 15 pixels high.
774		774
775	The second font is just used to add additional unicode characters not in	775	The second font is just used to add additional unicode characters not in
776	the base font, likewise the third, which is unfortunately non-bold, but	776	the base font, likewise the third, which is unfortunately non-bold, but
777	the bold version of the font does contain less characters, so this is a	777	the bold version of the font does contain fewer characters, so this is a
778	useful supplement.	778	useful supplement.
779		779
780	The third font is an Xft font with aliasing turned off, and the characters	780	The third font is an Xft font with aliasing turned off, and the characters
781	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	781	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
782	contains other characters, but we are not interested in them.	782	contains other characters, but we are not interested in them.
…		…
811	option B<-is>, the default), bold/blink font styles imply high	811	option B<-is>, the default), bold/blink font styles imply high
812	intensity foreground/background colours. Disabling this option (B<False>,	812	intensity foreground/background colours. Disabling this option (B<False>,
813	option B<+is>) disables this behaviour, the high intensity colours are not	813	option B<+is>) disables this behaviour, the high intensity colours are not
814	reachable.	814	reachable.
815		815
816	=item B<selectstyle:> I<mode>
817
818	Set mouse selection style to B<old> which is 2.20, B<oldword> which
819	is xterm style with 2.20 old word selection, or anything else which
820	gives xterm style selection. Only effective when the original (non-perl)
821	selection code is in use.
822
823	=item B<scrollstyle:> I<mode>
824
825	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
826	the author's favourite.
827
828	=item B<title:> I<string>	816	=item B<title:> I<string>
829		817
830	Set window title string, the default title is the command-line	818	Set window title string, the default title is the command-line
831	specified after the B<-e> option, if any, otherwise the application	819	specified after the B<-e> option, if any, otherwise the application
832	name; option B<-title>.	820	name; option B<-title>.
…		…
845	=item B<urgentOnBell:> I<boolean>	833	=item B<urgentOnBell:> I<boolean>
846		834
847	B<True>: set the urgency hint for the wm on receipt of a bell character.	835	B<True>: set the urgency hint for the wm on receipt of a bell character.
848	B<False>: do not set the urgency hint [default].	836	B<False>: do not set the urgency hint [default].
849		837
		838	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		839
850	=item B<visualBell:> I<boolean>	840	=item B<visualBell:> I<boolean>
851		841
852	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	842	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
853	B<False>: no visual bell [default]; option B<+vb>.	843	B<False>: no visual bell [default]; option B<+vb>.
854		844
…		…
856		846
857	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	847	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
858	the shell; option B<-ls>. B<False>: start as a normal sub-shell	848	the shell; option B<-ls>. B<False>: start as a normal sub-shell
859	[default]; option B<+ls>.	849	[default]; option B<+ls>.
860		850
		851	=item B<multiClickTime:> I<number>
		852
		853	Specify the maximum time in milliseconds between multi-click select
		854	events. The default is 500 milliseconds; option B<-mc>.
		855
861	=item B<utmpInhibit:> I<boolean>	856	=item B<utmpInhibit:> I<boolean>
862		857
863	B<True>: inhibit writing record into the system log file B<utmp>;	858	B<True>: inhibit writing record into the system log file B<utmp>;
864	option B<-ut>. B<False>: write record into the system log file B<utmp>	859	option B<-ut>. B<False>: write record into the system log file B<utmp>
865	[default]; option B<+ut>.	860	[default]; option B<+ut>.
…		…
877	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	872	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
878		873
879	This creates a new file in your home directory with the screen contents	874	This creates a new file in your home directory with the screen contents
880	every time you hit C<Print>.	875	every time you hit C<Print>.
881		876
		877	=item B<scrollstyle:> I<mode>
		878
		879	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		880	the author's favourite.
		881
		882	=item B<thickness:> I<number>
		883
		884	Set the scrollbar width in pixels.
		885
882	=item B<scrollBar:> I<boolean>	886	=item B<scrollBar:> I<boolean>
883		887
884	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	888	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
885	disable the scrollbar; option B<+sb>.	889	disable the scrollbar; option B<+sb>.
886		890
…		…
899	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar	903	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar
900	thumb with the pointer on middle button press/drag.	904	thumb with the pointer on middle button press/drag.
901		905
902	=item B<scrollTtyOutput:> I<boolean>	906	=item B<scrollTtyOutput:> I<boolean>
903		907
904	B<True>: scroll to bottom when tty receives output; option B<-si>.	908	B<True>: scroll to bottom when tty receives output; option B<+si>.
905	B<False>: do not scroll to bottom when tty receives output; option	909	B<False>: do not scroll to bottom when tty receives output; option
906	B<+si>.	910	B<-si>.
907		911
908	=item B<scrollWithBuffer:> I<boolean>	912	=item B<scrollWithBuffer:> I<boolean>
909		913
910	B<True>: scroll with scrollback buffer when tty receives new lines (and	914	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
911	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	915	try to show the same lines) and B<scrollTtyOutput> is False; option
912	with scrollback buffer when tty receives new lines; option B<+sw>.	916	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		917	new lines; option B<+sw>.
913		918
914	=item B<scrollTtyKeypress:> I<boolean>	919	=item B<scrollTtyKeypress:> I<boolean>
915		920
916	B<True>: scroll to bottom when a non-special key is pressed. Special keys	921	B<True>: scroll to bottom when a non-special key is pressed. Special keys
917	are those which are intercepted by rxvt-unicode for special handling and	922	are those which are intercepted by rxvt-unicode for special handling and
918	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	923	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
919	bottom when a non-special key is pressed; option B<+sk>.	924	bottom when a non-special key is pressed; option B<+sk>.
920		925
921	=item B<saveLines:> I<number>	926	=item B<saveLines:> I<number>
922		927
923	Save I<number> lines in the scrollback buffer [default 64]. This	928	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
924	resource is limited on most machines to 65535; option B<-sl>.
925		929
926	=item B<internalBorder:> I<number>	930	=item B<internalBorder:> I<number>
927		931
928	Internal border of I<number> pixels. This resource is limited to 100;	932	Internal border of I<number> pixels. This resource is limited to 100;
929	option B<-b>.	933	option B<-b>.
…		…
973	=item B<cursorBlink:> I<boolean>	977	=item B<cursorBlink:> I<boolean>
974		978
975	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	979	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
976	option B<-bc>.	980	option B<-bc>.
977		981
		982	=item B<cursorUnderline:> I<boolean>
		983
		984	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		985	option B<-uc>.
		986
978	=item B<pointerBlank:> I<boolean>	987	=item B<pointerBlank:> I<boolean>
979		988
980	B<True>: blank the pointer when a key is pressed or after a set number	989	B<True>: blank the pointer when a key is pressed or after a set number
981	of seconds of inactivity. B<False>: the pointer is always visible	990	of seconds of inactivity. B<False>: the pointer is always visible
982	[default].	991	[default].
…		…
987		996
988	=item B<pointerColor2:> I<colour>	997	=item B<pointerColor2:> I<colour>
989		998
990	Mouse pointer background colour.	999	Mouse pointer background colour.
991		1000
		1001	=item B<pointerShape:> I<string>
		1002
		1003	Compile I<frills>: Specifies the name of the mouse pointer shape
		1004	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		1005	file for possible values (omit the C<XC_> prefix).
		1006
992	=item B<pointerBlankDelay:> I<number>	1007	=item B<pointerBlankDelay:> I<number>
993		1008
994	Specifies number of seconds before blanking the pointer [default 2]. Use a	1009	Specifies number of seconds before blanking the pointer [default 2]. Use a
995	large number (e.g. C<987654321>) to effectively disable the timeout.	1010	large number (e.g. C<987654321>) to effectively disable the timeout.
996		1011
997	=item B<backspacekey:> I<string>	1012	=item B<backspacekey:> I<string>
998		1013
999	The string to send when the backspace key is pressed. If set to B<DEC>	1014	The string to send when the backspace key is pressed. If set to B<DEC>
1000	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	1015	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1001	(code 8) - which can be reversed with the appropriate DEC private mode	1016	(code 8) - which can be reversed with the appropriate DEC private mode
1002	escape sequence.	1017	escape sequence.
1003		1018
1004	=item B<deletekey:> I<string>	1019	=item B<deletekey:> I<string>
1005		1020
…		…
1022		1037
1023	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1038	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1024		1039
1025	=item B<preeditType:> I<style>	1040	=item B<preeditType:> I<style>
1026		1041
1027	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1042	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1028		1043
1029	=item B<inputMethod:> I<name>	1044	=item B<inputMethod:> I<name>
1030		1045
1031	I<name> of inputMethod to use; option B<-im>.	1046	I<name> of inputMethod to use; option B<-im>.
1032		1047
…		…
1050		1065
1051	Change the meaning of triple-click selection with the left mouse	1066	Change the meaning of triple-click selection with the left mouse
1052	button. Instead of selecting a full line it will extend the selection to	1067	button. Instead of selecting a full line it will extend the selection to
1053	the end of the logical line only; option B<-tcw>.	1068	the end of the logical line only; option B<-tcw>.
1054		1069
		1070	=item B<disablePasteBrackets:> I<boolean>
		1071
		1072	Prevent emission of paste bracket sequences; option B<-dpb>.
		1073
1055	=item B<insecure:> I<boolean>	1074	=item B<insecure:> I<boolean>
1056		1075
1057	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1076	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1058	echo arbitrary strings like the icon name or the locale. This could be	1077	echo arbitrary strings like the icon name or the locale. This could be
1059	abused if somebody gets 8-bit-clean access to your display, whether	1078	abused if somebody gets 8-bit-clean access to your display, whether
1060	through a mail client displaying mail bodies unfiltered or through	1079	through a mail client displaying mail bodies unfiltered or through
1061	write(1) or any other means. Therefore, these sequences are disabled by	1080	write(1) or any other means. Therefore, these sequences are disabled by
1062	default. (Note that many other terminals, including xterm, have these	1081	default. (Note that many other terminals, including xterm, have these
…		…
1080		1099
1081	=item B<secondaryScreen:> I<boolean>	1100	=item B<secondaryScreen:> I<boolean>
1082		1101
1083	Turn on/off secondary screen (default enabled).	1102	Turn on/off secondary screen (default enabled).
1084		1103
		1104	=item B<rewrapMode:> I<mode>
		1105
		1106	Sets long line rewrap behaviour on window resize to one of B<auto>
		1107	(default), B<always> or B<never>.
		1108
1085	=item B<secondaryScroll:> I<boolean>	1109	=item B<secondaryScroll:> I<boolean>
1086		1110
1087	Turn on/off secondary screen scroll (default enabled). If this	1111	Turn on/off secondary screen scroll (default enabled). If this
1088	option is enabled, scrolls on the secondary screen will change the	1112	option is enabled, scrolls on the secondary screen will change the
1089	scrollback buffer and switching to/from the secondary screen will	1113	scrollback buffer and, when secondaryScreen is off, switching
1090	instead scroll the screen up.	1114	to/from the secondary screen will instead scroll the screen up.
1091		1115
1092	=item B<hold>: I<boolean>	1116	=item B<hold>: I<boolean>
1093		1117
1094	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1118	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1095	will not immediately destroy its window when the program executed within	1119	will not immediately destroy its window when the program executed within
1096	it exits. Instead, it will wait till it is being killed or closed by the	1120	it exits. Instead, it will wait till it is being killed or closed by the
1097	user.	1121	user.
1098		1122
		1123	=item B<chdir>: I<path>
		1124
		1125	Sets the working directory for the shell (or the command specified via
		1126	B<-e>). The I<path> must be an absolute path and it must exist for
		1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1128	directory will be used; option B<-cd>.
		1129
1099	=item B<keysym.>I<sym>: I<string>	1130	=item B<keysym.>I<sym>: I<action>
1100		1131
1101	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1132	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1102	intervening resource name B<keysym.> cannot be omitted.	1133	resource name B<keysym.> cannot be omitted.
1103		1134
1104	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1135	Using this resource, you can map key combinations such as
1105	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1136	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1106	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1137	string than would normally result from that combination, making the
1107	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1138	terminal scroll up or down the way you want it, or any other thing an
1108	B<2>, B<3>, B<4>, B<5>.	1139	extension might provide.
		1140
		1141	The key combination that triggers the action, I<sym>, has the following format:
		1142
		1143	(modifiers-)key
		1144
		1145	Where I<modifiers> can be any combination of the following full or
		1146	abbreviated modifier names:
		1147
		1148	=begin table
		1149
		1150	B<ISOLevel3> B<I>
		1151	B<AppKeypad> B<K>
		1152	B<Control> B<C>
		1153	B<NumLock> B<N>
		1154	B<Shift> B<S>
		1155	B<Meta> B<M> I<or> B<A>
		1156	B<Lock> B<L>
		1157	B<Mod1> B<1>
		1158	B<Mod2> B<2>
		1159	B<Mod3> B<3>
		1160	B<Mod4> B<4>
		1161	B<Mod5> B<5>
		1162
		1163	=end table
1109		1164
1110	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1165	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1111	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1166	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1112	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1167	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1113	current application keymap mode state.	1168	current application keymap mode state.
1114		1169
1115	The spellings of I<key> can be obtained by using B<xev>(1) command or	1170	Due the the large number of modifier combinations, a key mapping will
1116	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1171	match if I<at least> the specified identifiers are being set, and no other
		1172	key mappings with those and more bits are being defined. That means that
		1173	defining a mapping for C<a> will automatically provide definitions for
		1174	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1175	themselves. See the C<builtin:> action, below, for a way to work around
		1176	this when this is a problem.
		1177
		1178	The spelling of I<key> depends on your implementation of X. An easy way to
		1179	find a key name is to use the B<xev>(1) command. You can find a list by
		1180	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1117	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1181	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1118	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1182	value (B<0x0000 - 0xFFFF>).
1119	performed in an exact manner; however, the closest match is assured.
1120		1183
1121	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1184	As with any resource value, the I<action> string may contain backslash
		1185	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1122	number), see RESOURCES in C<man 7 X> for futher details.	1186	number), see RESOURCES in C<man 7 X> for further details.
1123		1187
1124	You can define a range of keysyms in one shot by providing a I<string>	1188	An action starts with an action prefix that selects a certain type
1125	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1189	of action, followed by a colon. An action string without colons is
		1190	interpreted as a literal string to pass to the tty (as if it was
		1191	prefixed with C<string:>).
		1192
		1193	The following action prefixes are known - extensions can provide
		1194	additional prefixes:
		1195
		1196	=over
		1197
		1198	=item string:STRING
		1199
		1200	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1201	then the remaining C<STRING> will be passed to the program running in the
		1202	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1203	string C<echo rm -rf /> followed by a newline:
		1204
		1205	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1206
		1207	This could in theory be used to completely redefine your keymap.
		1208
		1209	In addition, for actions of this type, you can define a range of
		1210	keysyms in one shot by loading the C<keysym-list> perl extension and
		1211	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1126	should be a character not used by the strings.	1212	the delimiter `/' should be a character not used by the strings.
1127		1213
1128	Its usage can be demonstrated by an example:	1214	Its usage can be demonstrated by an example:
1129		1215
1130	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1216	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1131		1217
1132	The above line is equivalent to the following three lines:	1218	The above line is equivalent to the following three lines:
1133		1219
1134	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1220	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1135	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1221	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1136	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1222	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1137		1223
		1224	=item command:STRING
		1225
1138	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1226	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1139	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1227	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1228	the opposite of C<string:> - instead of sending it to the program running
		1229	in the terminal, it will be treated as if it were program output). This is
		1230	most useful to feed command sequences into @@RXVT_NAME@@.
		1231
1140	example the following means "change the current locale to C<zh_CN.GBK>	1232	For example the following means "change the current locale to C<zh_CN.GBK>
1141	when Control-Meta-c is being pressed":	1233	when Control-Meta-c is being pressed":
1142		1234
1143	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1235	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1144		1236
1145	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1237	The following example will map Control-Meta-1 and Control-Meta-2 to
1146	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1238	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1147	manpage. For example, the F<selection> extension (activated via	1239	font-switching at runtime:
1148	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1149		1240
1150	URxvt.keysym.M-C-c: perl:selection:rot13	1241	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1242	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1151		1243
1152	Due the the large number of modifier combinations, a defined key mapping	1244	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1153	will match if at I<at least> the specified identifiers are being set, and	1245	info):
1154	no other key mappings with those and more bits are being defined. That
1155	means that defining a key map for C<a> will automatically provide
1156	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1157	mappings themselves.
1158		1246
1159	Unfortunately, this will override built-in key mappings. For example	1247	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1248	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1249
		1250	=item builtin:
		1251
		1252	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1253	key binding existed for the key combination. The obvious use is to undo
		1254	the effect of existing bindings. The not so obvious use is to reinstate
		1255	bindings when another binding overrides too many modifiers.
		1256
1160	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1257	For example if you overwrite the C<Insert> key you will disable
1161	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1258	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1162	user-defined keymap using the C<builtin:> replacement:	1259	"holes" into the user-defined keymap using the C<builtin:> replacement:
1163		1260
1164	URxvt.keysym.Insert: <my insert key sequence>	1261	URxvt.keysym.Insert: <my insert key sequence>
1165	URxvt.keysym.S-Insert: builtin:	1262	URxvt.keysym.S-Insert: builtin:
1166		1263
1167	The first line defines a mapping for C<Insert> and I<any> combination	1264	The first line defines a mapping for C<Insert> and I<any> combination
1168	of modifiers. The second line re-establishes the default mapping for	1265	of modifiers. The second line re-establishes the default mapping for
1169	C<Shift-Insert>.	1266	C<Shift-Insert>.
1170		1267
1171	The following example will map Control-Meta-1 and Control-Meta-2 to	1268	=item builtin-string:
1172	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1173	font-switching at runtime:
1174		1269
1175	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1270	This action is mainly useful to restore string mappings for keys that
1176	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1271	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1272	difficult to explain - basically, this action will send the string to the
		1273	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1274	action for it.
1177		1275
1178	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1276	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1179	info):	1277	selection when you press C<Shift-Insert>. With the following bindings, it
		1278	would instead emit the (undocumented, but what applications running in the
		1279	terminal might expect) sequence C<ESC [ 2 $> instead:
1180		1280
1181	URxvt.keysym.M-C-3: command:\033[8;25;80t	1281	URxvt.keysym.S-Insert: builtin-string:
1182	URxvt.keysym.M-C-4: command:\033[8;48;110t	1282	URxvt.keysym.C-S-Insert: builtin:
		1283
		1284	The first line disables the paste functionality for that key
		1285	combination, and the second reinstates the default behaviour for
		1286	C<Control-Shift-Insert>, which would otherwise be overridden.
		1287
		1288	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1289	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1290	this:
		1291
		1292	URxvt.keysym.C-M-c: builtin-string:
		1293	URxvt.keysym.C-M-v: builtin-string:
		1294
		1295	=item EXTENSION:STRING
		1296
		1297	An action of this form invokes the action B<STRING>, if any, provided
		1298	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1299	be loaded automatically if necessary.
		1300
		1301	Not all extensions define actions, but popular extensions that do
		1302	include the I<selection> and I<matcher> extensions (documented in their
		1303	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1304	respectively).
		1305
		1306	From the silly examples department, this will rot13-"encrypt"
		1307	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1308	keyboards:
		1309
		1310	URxvt.keysym.M-C-c: selection:rot13
		1311
		1312	=item perl:STRING DEPRECATED
		1313
		1314	This is a deprecated way of invoking commands provided by perl
		1315	extensions. It is still supported, but should not be used anymore.
		1316
		1317	=back
1183		1318
1184	=item B<perl-ext-common>: I<string>	1319	=item B<perl-ext-common>: I<string>
1185		1320
1186	=item B<perl-ext>: I<string>	1321	=item B<perl-ext>: I<string>
1187		1322
1188	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1323	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1189	use in this terminal instance; option B<-pe>.	1324	use in this terminal instance; option B<-pe>.
1190		1325
1191	Extension names can be prefixed with a C<-> sign to prohibit using	1326	Extension names can be prefixed with a C<-> sign to remove them again, in
1192	them. This can be useful to selectively disable some extensions loaded	1327	case they had been specified earlier. This can be useful to selectively
1193	by default, or specified via the C<perl-ext-common> resource. For	1328	disable some extensions loaded by default, or specified via the
1194	example, C<default,-selection> will use all the default extension except	1329	C<perl-ext-common> resource. For example, C<default,-selection> will use
1195	C<selection>.	1330	all the default extensions except C<selection>.
1196		1331
1197	Extension names can also be followed by an argument in angle brackets	1332	To prohibit autoloading of extensions, you can prefix them with C</>,
1198	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1333	which will make urxvt refuse to automatically load them (this can be
1199	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1334	overridden, however, by specifying the extension name again without a
1200	multiple times with different arguments will pass multiple arguments to	1335	prefix, though). This does not prohibit extensions themselves loading
1201	the extension.	1336	other extensions. For example, C<default,/background> will keep the
		1337	C<background> extension from being loaded when a background OSC sequence
		1338	is received.
		1339
		1340	The default set includes the C<selection>, C<option-popup>,
		1341	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1342	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1343	in B<keysym> resources.
		1344
		1345	Any extension such that a corresponding resource is given on the
		1346	command line is automatically appended to B<perl-ext>.
1202		1347
1203	Each extension is looked up in the library directories, loaded if	1348	Each extension is looked up in the library directories, loaded if
1204	necessary, and bound to the current terminal instance.	1349	necessary, and bound to the current terminal instance. When the library
		1350	search path contains multiple extension files of the same name, then the
		1351	first one found will be used.
1205		1352
1206	If both of these resources are the empty string, then the perl	1353	If both of these resources are the empty string, then the perl interpreter
1207	interpreter will not be initialized. The idea behind two options is that	1354	will not be initialized. The rationale for having two options is that
1208	B<perl-ext-common> will be used for extensions that should be available to	1355	B<perl-ext-common> will be used for extensions that should be available to
1209	all instances, while B<perl-ext> is used for specific instances.	1356	all instances, while B<perl-ext> is used for specific instances.
1210		1357
1211	=item B<perl-eval>: I<string>	1358	=item B<perl-eval>: I<string>
1212		1359
1213	Perl code to be evaluated when all extensions have been registered. See	1360	Perl code to be evaluated when all extensions have been registered. See
1214	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1361	the @@RXVT_NAME@@perl(3) manpage.
1215	will be ignored when running setuid/setgid.
1216		1362
1217	=item B<perl-lib>: I<path>	1363	=item B<perl-lib>: I<path>
1218		1364
1219	Colon-separated list of additional directories that hold extension	1365	Colon-separated list of additional directories that hold extension
1220	scripts. When looking for extensions specified by the C<perl> resource,	1366	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1221	@@RXVT_NAME@@ will first look in these directories and then in	1367	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1222	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1368	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1223	will be ignored when running setuid/setgid.
1224		1369
1225	See the @@RXVT_NAME@@perl(3) manpage.	1370	See the @@RXVT_NAME@@perl(3) manpage.
1226		1371
1227	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1372	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1228		1373
…		…
1232	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1377	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1233		1378
1234	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1379	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1235	for details.	1380	for details.
1236		1381
1237	=item B<searchable-scrollback:> I<keysym>	1382	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1238		1383
1239	Sets the hotkey that starts the incremental scrollback buffer search	1384	This resource is deprecated and will be removed. Use a B<keysym> resource
1240	(default: C<M-s>).	1385	instead, e.g.:
1241		1386
		1387	URxvt.keysym.M-s: searchable-scrollback:start
		1388
1242	=item B<urlLauncher>: I<string>	1389	=item B<url-launcher>: I<string>
1243		1390
1244	Specifies the program to be started with a URL argument. Used by the	1391	Specifies the program to be started with a URL argument. Used by the
1245	C<selection-popup> and C<matcher> perl extensions.	1392	C<selection-popup> and C<matcher> perl extensions.
1246		1393
1247	=item B<transient-for>: I<windowid>	1394	=item B<transient-for>: I<windowid>
…		…
1250		1397
1251	=item B<override-redirect>: I<boolean>	1398	=item B<override-redirect>: I<boolean>
1252		1399
1253	Compile I<frills>: Sets override-redirect for the terminal window, making	1400	Compile I<frills>: Sets override-redirect for the terminal window, making
1254	it almost invisible to window managers; option B<-override-redirect>.	1401	it almost invisible to window managers; option B<-override-redirect>.
		1402
		1403	=item B<iso14755:> I<boolean>
		1404
		1405	Turn on/off ISO 14755 (default enabled).
1255		1406
1256	=item B<iso14755_52:> I<boolean>	1407	=item B<iso14755_52:> I<boolean>
1257		1408
1258	Turn on/off ISO 14755 5.2 mode (default enabled).	1409	Turn on/off ISO 14755 5.2 mode (default enabled).
1259		1410
…		…
1287	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1438	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1288		1439
1289	The behaviour of text selection and insertion/pasting mechanism is similar	1440	The behaviour of text selection and insertion/pasting mechanism is similar
1290	to I<xterm>(1).	1441	to I<xterm>(1).
1291		1442
1292	=over 4	1443	=over
1293		1444
1294	=item B<Selecting>:	1445	=item B<Selecting>:
1295		1446
1296	Left click at the beginning of the region, drag to the end of the region	1447	Left click at the beginning of the region, drag to the end of the region
1297	and release; Right click to extend the marked region; Left double-click	1448	and release; Right click to extend the marked region; Left double-click
…		…
1312	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1463	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1313		1464
1314	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1465	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1315	inserted too.	1466	inserted too.
1316		1467
		1468	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1469	B<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1470	binding causes the value of the internal selection to be copied to the
		1471	CLIPBOARD selection, while the second binding causes the value of the
		1472	CLIPBOARD selection to be inserted.
		1473
1317	=back	1474	=back
1318		1475
1319	=head1 CHANGING FONTS	1476	=head1 CHANGING FONTS
1320		1477
1321	Changing fonts (or font sizes, respectively) via the keypad is not yet	1478	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1338	and character codes using the keyboard. It consists of 4 parts. The	1495	and character codes using the keyboard. It consists of 4 parts. The
1339	first part is available if rxvt-unicode has been compiled with	1496	first part is available if rxvt-unicode has been compiled with
1340	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1497	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1341	with C<--enable-iso14755>.	1498	with C<--enable-iso14755>.
1342		1499
1343	=over 4	1500	=over
1344		1501
1345	=item * 5.1: Basic method	1502	=item * 5.1: Basic method
1346		1503
1347	This allows you to enter unicode characters using their hexcode.	1504	This allows you to enter unicode characters using their hexcode.
1348		1505
…		…
1402	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1559	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1403	it can be seen via the I<who(1)> command, and can accept messages. To	1560	it can be seen via the I<who(1)> command, and can accept messages. To
1404	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1561	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1405	on some systems or setgid to root or to some other group on others.	1562	on some systems or setgid to root or to some other group on others.
1406		1563
1407	=head1 COLORS AND GRAPHICS	1564	=head1 COLOURS AND GRAPHICS
1408		1565
1409	In addition to the default foreground and background colours,	1566	In addition to the default foreground and background colours,
1410	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1567	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1411	high-intensity bold/blink versions of the same). Here is a list of the	1568	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1412	colours with their names.	1569	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1570	cube plus a 8 (24) colour greyscale ramp.
		1571
		1572	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1573	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1574	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1575	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1576	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1577	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1578	use many similar 24-bit colours. It's typically not a problem in common
		1579	scenarios.
		1580
		1581	Here is a list of the ANSI colours with their names.
1413		1582
1414	=begin table	1583	=begin table
1415		1584
1416	B<color0> (black) = Black	1585	B<color0> (black) = Black
1417	B<color1> (red) = Red3	1586	B<color1> (red) = Red3
…		…
1437	It is also possible to specify the colour values of B<foreground>,	1606	It is also possible to specify the colour values of B<foreground>,
1438	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1607	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1439	a number 0-15, as a convenient shorthand to reference the colour name of	1608	a number 0-15, as a convenient shorthand to reference the colour name of
1440	color0-color15.	1609	color0-color15.
1441		1610
1442	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1611	The following text gives values for the standard 88 colour mode (and
1443	additional 72 colours. The first 64 of those (with indices 16 to 79)	1612	values for the 256 colour mode in parentheses).
1444	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1445	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1446		1613
		1614	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1615
		1616	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1617	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1618
		1619	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1620	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1621	the RGB cube.
		1622
1447	Together, all those colours implement the 88 colour xterm colours. Only	1623	Together, all those colours implement the 88 (256) colour xterm
1448	the first 16 can be changed using resources currently, the rest can only	1624	colours. Only the first 16 can be changed using resources currently, the
1449	be changed via command sequences ("escape codes").	1625	rest can only be changed via command sequences ("escape codes").
		1626
		1627	Applications are advised to use terminfo or command sequences to discover
		1628	number and RGB values of all colours (yes, you can query this...).
1450		1629
1451	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1630	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1452	always swapping the foreground/background colours. This is in contrast to	1631	always swapping the foreground/background colours. This is in contrast to
1453	I<xterm>(1) where the colours are only swapped if they have not otherwise	1632	I<xterm>(1) where the colours are only swapped if they have not otherwise
1454	been specified. For example,	1633	been specified. For example,
1455		1634
1456	=over 4
1457
1458	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1635	@@RXVT_NAME@@ -fg Black -bg White -rv
1459		1636
1460	would yield White on Black, while on I<xterm>(1) it would yield Black	1637	would yield White on Black, while on I<xterm>(1) it would yield Black on
1461	on White.	1638	White.
1462
1463	=back
1464		1639
1465	=head2 ALPHA CHANNEL SUPPORT	1640	=head2 ALPHA CHANNEL SUPPORT
1466		1641
1467	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1642	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1468	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1643	their act together, rxvt-unicode will do its own alpha channel management:
1469	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1644
1470	in addition to the ones provided by X, where the additional A component	1645	You can prefix any colour with an opaqueness percentage enclosed in
		1646	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1647	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1648	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1649	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1650	is the recommended format to specify transparency values, and works with
		1651	all ways to specify a colour.
		1652
		1653	For complete control, rxvt-unicode also supports
		1654	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1655	specifications, where the additional C<aaaa> component specifies opacity
1471	specifies opacity (alpha) values. The minimum value of C<0> is completely	1656	(alpha) values. The minimum value of C<0000> is completely transparent,
1472	transparent). You can also prefix any color with C<[percent]>, where	1657	while C<ffff> is completely opaque). The two example colours from
1473	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1658	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1474	the color, where C<0> is completely transparent and C<100> is completelxy	1659	C<rgba:0000/ff00/0000/f332>.
1475	opaque.
1476		1660
1477	You probably need to specify B<"-depth 32">, too, and have the luck that	1661	You probably need to specify B<"-depth 32">, too, to force a visual with
1478	your X-server uses ARGB pixel layout, as X is far from just supporting	1662	alpha channels, and have the luck that your X-server uses ARGB pixel
1479	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1663	layout, as X is far from just supporting ARGB visuals out of the box, and
		1664	rxvt-unicode just fudges around.
1480		1665
1481	For example, the following selects an almost completely transparent red	1666	For example, the following selects an almost completely transparent black
1482	background, and an almost opaque pink foreground:	1667	background, and an almost opaque pink foreground:
1483		1668
1484	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1669	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1485		1670
1486	I<Please note that transparency of any kind if completely unsupported by	1671	When not using a background image, then the interpretation of the
1487	the author. Don't bug him with installation questions!>	1672	alpha channel is up to your compositing manager (most interpret it as
		1673	transparency of course).
		1674
		1675	When using a background pixmap or pseudo-transparency, then the background
		1676	colour will always behave as if it were completely transparent (so the
		1677	background image shows instead), regardless of how it was specified, while
		1678	other colours will either be transparent as specified (the background
		1679	image will show through) on servers supporting the RENDER extension, or
		1680	fully opaque on servers not supporting the RENDER EXTENSION.
		1681
		1682	Please note that due to bugs in Xft, specifying alpha values might result
		1683	in garbage being displayed when the X-server does not support the RENDER
		1684	extension.
1488		1685
1489	=head1 ENVIRONMENT	1686	=head1 ENVIRONMENT
1490		1687
1491	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1688	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1492		1689
1493	=over 4	1690	=over
1494		1691
1495	=item B<TERM>	1692	=item B<TERM>
1496		1693
1497	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1694	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1498	resources or on the command line.	1695	resources or on the command line.
…		…
1526	C<--with-terminfo=PATH>.	1723	C<--with-terminfo=PATH>.
1527		1724
1528	=item B<DISPLAY>	1725	=item B<DISPLAY>
1529		1726
1530	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1727	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1531	display in its child processes.	1728	display in its child processes if C<-display> isn't used to override. It
		1729	defaults to C<:0> if it doesn't exist.
1532		1730
1533	=item B<SHELL>	1731	=item B<SHELL>
1534		1732
1535	The shell to be used for command execution, defaults to C</bin/sh>.	1733	The shell to be used for command execution, defaults to C</bin/sh>.
1536		1734
1537	=item B<RXVT_SOCKET>	1735	=item B<RXVT_SOCKET> [I<sic>]
1538		1736
1539	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1737	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1540	@@RXVT_NAME@@d(1).	1738	@@RXVT_NAME@@d(1).
1541		1739
1542	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1740	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1741
		1742	=item B<URXVT_PERL_LIB>
		1743
		1744	Additional F<:>-separated library search path for perl extensions. Will be
		1745	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1746	directory.
		1747
		1748	=item B<URXVT_PERL_VERBOSITY>
		1749
		1750	See L<@@RXVT_NAME@@perl>(3).
1543		1751
1544	=item B<HOME>	1752	=item B<HOME>
1545		1753
1546	Used to locate the default directory for the unix domain socket for	1754	Used to locate the default directory for the unix domain socket for
1547	daemon communications and to locate various resource files (such as	1755	daemon communications and to locate various resource files (such as
1548	C<.Xdefaults>)	1756	C<.Xdefaults>)
1549		1757
1550	=item B<XAPPLRESDIR>	1758	=item B<XAPPLRESDIR>
1551		1759
1552	Directory where various X resource files are being located.	1760	Directory where application-specific X resource files are located.
1553		1761
1554	=item B<XENVIRONMENT>	1762	=item B<XENVIRONMENT>
1555		1763
1556	If set and accessible, gives the name of a X resource file to be loaded by	1764	If set and accessible, gives the name of a X resource file to be loaded by
1557	@@RXVT_NAME@@.	1765	@@RXVT_NAME@@.
1558		1766
1559	=back	1767	=back
1560		1768
1561	=head1 FILES	1769	=head1 FILES
1562		1770
1563	=over 4	1771	=over
1564		1772
1565	=item B</usr/lib/X11/rgb.txt>	1773	=item B</usr/lib/X11/rgb.txt>
1566		1774
1567	Color names.	1775	Colour names.
1568		1776
1569	=back	1777	=back
1570		1778
1571	=head1 SEE ALSO	1779	=head1 SEE ALSO
1572		1780
		1781	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1573	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1782	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1574		1783
1575	=head1 CURRENT PROJECT COORDINATOR	1784	=head1 CURRENT PROJECT COORDINATOR
1576		1785
1577	=over 4	1786	=over
1578		1787
1579	=item Project Coordinator	1788	=item Project Coordinator
1580		1789
1581	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1790	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1582		1791
1583	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1792	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1584		1793
1585	=back	1794	=back
1586		1795
1587	=head1 AUTHORS	1796	=head1 AUTHORS
1588		1797
1589	=over 4	1798	=over
1590		1799
1591	=item John Bovey	1800	=item John Bovey
1592		1801
1593	University of Kent, 1992, wrote the original Xvt.	1802	University of Kent, 1992, wrote the original Xvt.
1594		1803
1595	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1804	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1596		1805
1597	very heavily modified Xvt and came up with Rxvt	1806	very heavily modified Xvt and came up with Rxvt
1598		1807
1599	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1808	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1600		1809
1601	wrote the Greek Keyboard Input (no longer in code)	1810	wrote the Greek Keyboard Input (no longer in code)
1602		1811
1603	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1812	=item mj olesen <olesen@me.QueensU.CA>
1604		1813
1605	Wrote the menu system.	1814	Wrote the menu system.
1606		1815
1607	Project Coordinator (changes.txt 2.11 to 2.21)	1816	Project Coordinator (changes.txt 2.11 to 2.21)
1608		1817
1609	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1818	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1610		1819
1611	Project Coordinator (changes.txt 2.21a to 2.4.5)	1820	Project Coordinator (changes.txt 2.21a to 2.4.5)
1612		1821
1613	=item Geoff Wing L<< <gcw@pobox.com> >>	1822	=item Geoff Wing <gcw@pobox.com>
1614		1823
1615	Rewrote screen display and text selection routines.	1824	Rewrote screen display and text selection routines.
1616		1825
1617	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1826	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1618		1827
1619	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1828	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1620		1829
1621	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1830	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1622	extension, random hacks, numerous bugfixes and extensions.	1831	extension, random hacks, numerous bugfixes and extensions.
1623		1832
1624	Project Coordinator (Changes 1.0 -)	1833	Project Coordinator (Changes 1.0 -)
1625		1834
1626	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1835	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1627		1836
1628	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1837	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1629		1838
1630	=back	1839	=back
1631		1840

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.154 by ayin, Fri Dec 14 09:06:36 2007 UTC vs. Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.154 by ayin, Fri Dec 14 09:06:36 2007 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC