[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126		132
127	=item B<-tr>\|B<+tr>	133	=item B<-fps> I<number>
128		134
129	Turn on/off illusion of a transparent window background; resource B<transparent>.	135	Compile I<frills>: Set the refresh interval (in frames per second or
130		136	negative seconds); resource B<refreshRate>.
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		137
137	=item B<-fade> I<number>	138	=item B<-fade> I<number>
138		139
139	Fade the text by the given percentage when focus is lost. Small values	140	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	141	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	144	=item B<-fadecolor> I<colour>
144		145
145	Fade to this colour when fading is used (see B<-fade>). The default colour	146	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	147	is opaque black. resource B<fadeColor>.
147		148
148	=item B<-tint> I<colour>	149	=item B<-icon> I<file>
149		150
150	Tint the transparent background pixmap with the given colour when	151	Compile I<pixbuf>: Use the specified image as application icon. This
151	transparency is enabled with B<-tr>. This only works for	152	is used by many window managers, taskbars and pagers to represent the
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be	153	application window; resource I<iconFile>.
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colors essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186		154
187	=item B<-bg> I<colour>	155	=item B<-bg> I<colour>
188		156
189	Window background colour; resource B<background>.	157	Window background colour; resource B<background>.
190		158
191	=item B<-fg> I<colour>	159	=item B<-fg> I<colour>
192		160
193	Window foreground colour; resource B<foreground>.	161	Window foreground colour; resource B<foreground>.
194
195	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197	Compile I<afterimage>: Specify image file for the background and also
198	optionally specify its scaling with a geometry string. Note you may need to
199	add quotes to avoid special shell interpretation of the C<;> in the
200	command-line; for more details see resource B<backgroundPixmap>.
201		162
202	=item B<-cr> I<colour>	163	=item B<-cr> I<colour>
203		164
204	The cursor colour; resource B<cursorColor>.	165	The cursor colour; resource B<cursorColor>.
205		166
…		…
264		225
265	=item B<-ls>\|B<+ls>	226	=item B<-ls>\|B<+ls>
266		227
267	Start as a login-shell/sub-shell; resource B<loginShell>.	228	Start as a login-shell/sub-shell; resource B<loginShell>.
268		229
		230	=item B<-mc> I<milliseconds>
		231
		232	Specify the maximum time between multi-click selections.
		233
269	=item B<-ut>\|B<+ut>	234	=item B<-ut>\|B<+ut>
270		235
271	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	236	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
272	B<utmpInhibit>.	237	B<utmpInhibit>.
273		238
…		…
315		280
316	=item B<-bc>\|B<+bc>	281	=item B<-bc>\|B<+bc>
317		282
318	Blink the cursor; resource B<cursorBlink>.	283	Blink the cursor; resource B<cursorBlink>.
319		284
		285	=item B<-uc>\|B<+uc>
		286
		287	Make the cursor underlined; resource B<cursorUnderline>.
		288
320	=item B<-iconic>	289	=item B<-iconic>
321		290
322	Start iconified, if the window manager supports that option.	291	Start iconified, if the window manager supports that option.
323	Alternative form is B<-ic>.	292	Alternative form is B<-ic>.
324		293
…		…
340		309
341	=item B<-bl>	310	=item B<-bl>
342		311
343	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	312	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
344	if honoured by the WM, the rxvt-unicode window will not have window	313	if honoured by the WM, the rxvt-unicode window will not have window
345	decorations; resource B<borderLess>.	314	decorations; resource B<borderLess>. If the window manager does not
		315	support MWM hints (e.g. kwin), enables override-redirect mode.
346		316
347	=item B<-override-redirect>	317	=item B<-override-redirect>
348		318
349	Compile I<frills>: Sets override-redirect on the window; resource	319	Compile I<frills>: Sets override-redirect on the window; resource
350	B<override-redirect>.	320	B<override-redirect>.
		321
		322	=item B<-dockapp>
		323
		324	Sets the initial state of the window to WithdrawnState, which makes
		325	window managers that support this extension treat it as a dockapp.
351		326
352	=item B<-sbg>	327	=item B<-sbg>
353		328
354	Compile I<frills>: Disable the usage of the built-in block graphics/line	329	Compile I<frills>: Disable the usage of the built-in block graphics/line
355	drawing characters and just rely on what the specified fonts provide. Use	330	drawing characters and just rely on what the specified fonts provide. Use
…		…
359	=item B<-lsp> I<number>	334	=item B<-lsp> I<number>
360		335
361	Compile I<frills>: Lines (pixel height) to insert between each row of	336	Compile I<frills>: Lines (pixel height) to insert between each row of
362	the display. Useful to work around font rendering problems; resource	337	the display. Useful to work around font rendering problems; resource
363	B<lineSpace>.	338	B<lineSpace>.
		339
		340	=item B<-letsp> I<number>
		341
		342	Compile I<frills>: Amount to adjust the computed character width by
		343	to control overall letter spacing. Negative values will tighten up the
		344	letter spacing, positive values will space letters out more. Useful to
		345	work around odd font metrics; resource B<letterSpace>.
364		346
365	=item B<-tn> I<termname>	347	=item B<-tn> I<termname>
366		348
367	This option specifies the name of the terminal type to be set in the	349	This option specifies the name of the terminal type to be set in the
368	B<TERM> environment variable. This terminal type must exist in the	350	B<TERM> environment variable. This terminal type must exist in the
…		…
403	=item B<-pt> I<style>	385	=item B<-pt> I<style>
404		386
405	Compile I<XIM>: input style for input method; B<OverTheSpot>,	387	Compile I<XIM>: input style for input method; B<OverTheSpot>,
406	B<OffTheSpot>, B<Root>; resource B<preeditType>.	388	B<OffTheSpot>, B<Root>; resource B<preeditType>.
407		389
		390	If the perl extension C<xim-onthespot> is used (which is the default),
		391	then additionally the C<OnTheSpot> preedit type is available.
		392
408	=item B<-im> I<text>	393	=item B<-im> I<text>
409		394
410	Compile I<XIM>: input method name. resource B<inputMethod>.	395	Compile I<XIM>: input method name. resource B<inputMethod>.
411		396
412	=item B<-imlocale> I<string>	397	=item B<-imlocale> I<string>
…		…
426	Change the meaning of triple-click selection with the left mouse	411	Change the meaning of triple-click selection with the left mouse
427	button. Only effective when the original (non-perl) selection code is	412	button. Only effective when the original (non-perl) selection code is
428	in-use. Instead of selecting a full line it will extend the selection to	413	in-use. Instead of selecting a full line it will extend the selection to
429	the end of the logical line only. resource B<tripleclickwords>.	414	the end of the logical line only. resource B<tripleclickwords>.
430		415
		416	=item B<-dpb>\|B<+dpb>
		417
		418	Compile frills: Disable (or enable) emitting bracketed paste mode
		419	sequences (default enabled). Bracketed paste mode allows programs
		420	to detect when something is pasted. Since more and more programs
		421	abuse this, these sequences can be disabled. The command sequences to
		422	enable and query paste mode will still work, but the actual bracket
		423	sequences will no longer be emitted. You can also toggle this from the
		424	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		425
431	=item B<-insecure>	426	=item B<-insecure>
432		427
433	Enable "insecure" mode, which currently enables most of the escape	428	Enable "insecure" mode, which currently enables most of the escape
434	sequences that echo strings. See the resource B<insecure> for more	429	sequences that echo strings. See the resource B<insecure> for more
435	info.	430	info.
…		…
447		442
448	=item B<-ssr>\|B<+ssr>	443	=item B<-ssr>\|B<+ssr>
449		444
450	Turn on/off secondary screen scroll (default enabled); resource	445	Turn on/off secondary screen scroll (default enabled); resource
451	B<secondaryScroll>.	446	B<secondaryScroll>.
		447
		448	=item B<-rm> I<mode>
		449
		450	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		451	to one of B<auto> (the default), B<always> or B<never>. The latter two
		452	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		453	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		454	B<rewrapMode>.
452		455
453	=item B<-hold>\|B<+hold>	456	=item B<-hold>\|B<+hold>
454		457
455	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	458	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
456	will not immediately destroy its window when the program executed within	459	will not immediately destroy its window when the program executed within
…		…
535		538
536	# now communicate with rxvt	539	# now communicate with rxvt
537	my $slave = $pty->slave;	540	my $slave = $pty->slave;
538	while (<$slave>) { print $slave "got <$_>\n" }	541	while (<$slave>) { print $slave "got <$_>\n" }
539		542
		543	Note that, despite what the name might imply, the file descriptor does not
		544	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		545	domain or tcp socket). While tty operations cannot be done in this case,
		546	B<@@RXVT_NAME@@> can still be remote controlled with it:
		547
		548	use Socket;
		549	use Fcntl;
		550
		551	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		552	fcntl $slave, Fcntl::F_SETFD, 0;
		553	system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
		554	close $slave;
		555
		556	syswrite $URXVT, "Type a secret password: ";
		557	my $secret = do { local $/ = "\r"; <$URXVT> };
		558	print "Not so secret anymore: $secret\n";
		559
540	=item B<-pe> I<string>	560	=item B<-pe> I<string>
541		561
542	Comma-separated list of perl extension scripts to use (or not to use) in	562	Comma-separated list of perl extension scripts to use (or not to use) in
543	this terminal instance. See resource B<perl-ext> for details.	563	this terminal instance. See resource B<perl-ext> for details.
544		564
…		…
553	You can set and change the resources using X11 tools like B<xrdb>. Many	573	You can set and change the resources using X11 tools like B<xrdb>. Many
554	distribution do also load settings from the B<~/.Xresources> file when X	574	distribution do also load settings from the B<~/.Xresources> file when X
555	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	575	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
556	with later settings overwriting earlier ones:	576	with later settings overwriting earlier ones:
557		577
558	1. system-wide app-defaults file, either locale-dependent OR global
559	2. app-defaults file in $XAPPLRESDIR	578	1. app-defaults file in $XAPPLRESDIR
		579	2. $HOME/.Xdefaults
560	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	580	3. RESOURCE_MANAGER property on root-window of screen 0
561	4. SCREEN_RESOURCES for the current screen	581	4. SCREEN_RESOURCES property on root-window of the current screen
562	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	582	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
563	6. resources specified via -xrm on the commandline	583	6. resources specified via -xrm on the commandline
564		584
565	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	585	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
566	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	586	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
571	be used. Command-line arguments can be used to override resource	591	be used. Command-line arguments can be used to override resource
572	settings. The following resources are supported (you might want to	592	settings. The following resources are supported (you might want to
573	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	593	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
574	extensions not documented here):	594	extensions not documented here):
575		595
576	=over 4	596	=over
577		597
578	=item B<depth:> I<bitdepth>	598	=item B<depth:> I<bitdepth>
579		599
580	Compile I<xft>: Attempt to find a visual with the given bit depth;	600	Compile I<xft>: Attempt to find a visual with the given bit depth;
581	option B<-depth>.	601	option B<-depth>.
…		…
607	Use the specified colour for the colour value I<n>, where 0-7	627	Use the specified colour for the colour value I<n>, where 0-7
608	corresponds to low-intensity (normal) colours and 8-15 corresponds to	628	corresponds to low-intensity (normal) colours and 8-15 corresponds to
609	high-intensity (bold = bright foreground, blink = bright background)	629	high-intensity (bold = bright foreground, blink = bright background)
610	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	630	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
611	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	631	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
612	names used are listed in the B<COLORS AND GRAPHICS> section.	632	names used are listed in the B<COLOURS AND GRAPHICS> section.
613		633
614	Colours higher than 15 cannot be set using resources (yet), but can be	634	Colours higher than 15 cannot be set using resources (yet), but can be
615	changed using an escape command (see @@RXVT_NAME@@(7)).	635	changed using an escape command (see @@RXVT_NAME@@(7)).
616		636
617	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	637	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
628	=item B<colorUL:> I<colour>	648	=item B<colorUL:> I<colour>
629		649
630	Use the specified colour to display underlined characters when the	650	Use the specified colour to display underlined characters when the
631	foreground colour is the default.	651	foreground colour is the default.
632		652
633	=item B<colorRV:> I<colour>
634
635	Use the specified colour as the background for reverse video characters
636	when OPTION_HC is disabled (--disable-frills).
637
638	=item B<underlineColor:> I<colour>	653	=item B<underlineColor:> I<colour>
639		654
640	If set, use the specified colour as the colour for the underline	655	If set, use the specified colour as the colour for the underline
641	itself. If unset, use the foreground colour.	656	itself. If unset, use the foreground colour.
		657
		658	=item B<highlightColor:> I<colour>
		659
		660	If set, use the specified colour as the background for highlighted
		661	characters. If unset, use reverse video.
		662
		663	=item B<highlightTextColor:> I<colour>
		664
		665	If set and highlightColor is set, use the specified colour as the
		666	foreground for highlighted characters.
642		667
643	=item B<cursorColor:> I<colour>	668	=item B<cursorColor:> I<colour>
644		669
645	Use the specified colour for the cursor. The default is to use the	670	Use the specified colour for the cursor. The default is to use the
646	foreground colour; option B<-cr>.	671	foreground colour; option B<-cr>.
…		…
653		678
654	=item B<reverseVideo:> I<boolean>	679	=item B<reverseVideo:> I<boolean>
655		680
656	B<True>: simulate reverse video by foreground and background colours;	681	B<True>: simulate reverse video by foreground and background colours;
657	option B<-rv>. B<False>: regular screen colours [default]; option	682	option B<-rv>. B<False>: regular screen colours [default]; option
658	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	683	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
659		684
660	=item B<jumpScroll:> I<boolean>	685	=item B<jumpScroll:> I<boolean>
661		686
662	B<True>: specify that jump scrolling should be used. When receiving lots	687	B<True>: specify that jump scrolling should be used. When receiving lots
663	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	688	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
677		702
678	B<False>: specify that everything is to be displayed, even	703	B<False>: specify that everything is to be displayed, even
679	if the refresh is too fast for the human eye to read anything (or the	704	if the refresh is too fast for the human eye to read anything (or the
680	monitor to display anything); option B<+ss>.	705	monitor to display anything); option B<+ss>.
681		706
682	=item B<transparent:> I<boolean>	707	=item B<refreshRate:> I<number>
683		708
684	Turn on/off illusion of a transparent window background.	709	Compile I<frills>: When positive, sets the maximum refreshes per second
685		710	(the default is C<60>). When zero or negative, sets the minimum interval
686	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in	711	between refreshes, negated. That is, positive numbers limit the number
687	future versions.	712	of refreshes per second to that number, similar to a fps limiter in
688		713	games. A negative number gets negated and directly sets the minimum
689	I<Please address all transparency related issues to Sasha Vasko at	714	interval between refreshes, that is, C<10> and C<-0.1> both specify
690	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>	715	the same refresh interval (likewise C<50> and C<0.02>). Finally, zero
		716	makes @@RXVT_NAME@@ refresh as fast as possible. Fractional values are
		717	supported; option B<-fps>.
691		718
692	=item B<fading:> I<number>	719	=item B<fading:> I<number>
693		720
694	Fade the text by the given percentage when focus is lost; option B<-fade>.	721	Fade the text by the given percentage when focus is lost; option B<-fade>.
695		722
696	=item B<fadeColor:> I<colour>	723	=item B<fadeColor:> I<colour>
697		724
698	Fade to this colour, when fading is used (see B<fading:>). The default	725	Fade to this colour, when fading is used (see B<fading:>). The default
699	colour is black; option B<-fadecolor>.	726	colour is black; option B<-fadecolor>.
700		727
701	=item B<tintColor:> I<colour>	728	=item B<iconFile:> I<file>
702		729
703	Tint the transparent background pixmap with the given colour; option	730	Set the application icon pixmap; option B<-icon>.
704	B<-tint>.
705
706	=item B<shading:> I<number>
707
708	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
709	in addition to tinting it; option B<-sh>.
710
711	=item B<blendType:> I<string>
712
713	Specify background blending type; option B<-blt>.
714
715	=item B<blurRadius:> I<number>
716
717	Apply Gaussian Blurr with the specified radius to the transparent
718	background image; option B<-blr>.
719		731
720	=item B<scrollColor:> I<colour>	732	=item B<scrollColor:> I<colour>
721		733
722	Use the specified colour for the scrollbar [default #B2B2B2].	734	Use the specified colour for the scrollbar [default #B2B2B2].
723		735
…		…
728		740
729	=item B<borderColor:> I<colour>	741	=item B<borderColor:> I<colour>
730		742
731	The colour of the border around the text area and between the scrollbar	743	The colour of the border around the text area and between the scrollbar
732	and the text.	744	and the text.
733
734	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
735
736	Use the specified image file for the background and also
737	optionally specify its scaling with a geometry string B<WxH+X+Y>,
738	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
739	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
740	centre (percent). A scale of 0 displays the image with tiling. A scale
741	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
742	an integer number of images in that direction. No image will be magnified
743	beyond 10 times its original size. The maximum permitted scale is 1000.
744	Additional operations can be specified after colon B<:op1:op2...>.
745	Supported operations are:
746
747	tile force background image to be tiled and not scaled. Equivalent to 0x0
748	propscale will scale image keeping proportions
749	auto will scale image to match window size. Equivalent to 100x100
750	hscale will scale image horizontally to the window size
751	vscale will scale image vertically to the window size
752	scale will scale image to match window size
753	root will tile image as if it was a root window background, auto-adjusting
754	whenever terminal window moves
755
756	If used in conjunction with B<-tr> option, the specified pixmap will be
757	blended over transparency image using either alpha-blending, or any
758	other blending type, specified with B<-blt "type"> option.
759
760	=item B<path:> I<path>
761
762	Specify the colon-delimited search path for finding background image files.
763		745
764	=item B<font:> I<fontlist>	746	=item B<font:> I<fontlist>
765		747
766	Select the fonts to be used. This is a comma separated list of font names	748	Select the fonts to be used. This is a comma separated list of font names
767	that are checked in order when trying to find glyphs for characters. The	749	that are checked in order when trying to find glyphs for characters. The
…		…
790	it is named first) and thus defines the character cell grid to be 9 pixels	772	it is named first) and thus defines the character cell grid to be 9 pixels
791	wide and 15 pixels high.	773	wide and 15 pixels high.
792		774
793	The second font is just used to add additional unicode characters not in	775	The second font is just used to add additional unicode characters not in
794	the base font, likewise the third, which is unfortunately non-bold, but	776	the base font, likewise the third, which is unfortunately non-bold, but
795	the bold version of the font does contain less characters, so this is a	777	the bold version of the font does contain fewer characters, so this is a
796	useful supplement.	778	useful supplement.
797		779
798	The third font is an Xft font with aliasing turned off, and the characters	780	The third font is an Xft font with aliasing turned off, and the characters
799	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	781	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
800	contains other characters, but we are not interested in them.	782	contains other characters, but we are not interested in them.
…		…
851	=item B<urgentOnBell:> I<boolean>	833	=item B<urgentOnBell:> I<boolean>
852		834
853	B<True>: set the urgency hint for the wm on receipt of a bell character.	835	B<True>: set the urgency hint for the wm on receipt of a bell character.
854	B<False>: do not set the urgency hint [default].	836	B<False>: do not set the urgency hint [default].
855		837
		838	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		839
856	=item B<visualBell:> I<boolean>	840	=item B<visualBell:> I<boolean>
857		841
858	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	842	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
859	B<False>: no visual bell [default]; option B<+vb>.	843	B<False>: no visual bell [default]; option B<+vb>.
860		844
…		…
862		846
863	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	847	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
864	the shell; option B<-ls>. B<False>: start as a normal sub-shell	848	the shell; option B<-ls>. B<False>: start as a normal sub-shell
865	[default]; option B<+ls>.	849	[default]; option B<+ls>.
866		850
		851	=item B<multiClickTime:> I<number>
		852
		853	Specify the maximum time in milliseconds between multi-click select
		854	events. The default is 500 milliseconds; option B<-mc>.
		855
867	=item B<utmpInhibit:> I<boolean>	856	=item B<utmpInhibit:> I<boolean>
868		857
869	B<True>: inhibit writing record into the system log file B<utmp>;	858	B<True>: inhibit writing record into the system log file B<utmp>;
870	option B<-ut>. B<False>: write record into the system log file B<utmp>	859	option B<-ut>. B<False>: write record into the system log file B<utmp>
871	[default]; option B<+ut>.	860	[default]; option B<+ut>.
…		…
888	=item B<scrollstyle:> I<mode>	877	=item B<scrollstyle:> I<mode>
889		878
890	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	879	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
891	the author's favourite.	880	the author's favourite.
892		881
		882	=item B<thickness:> I<number>
		883
		884	Set the scrollbar width in pixels.
		885
893	=item B<scrollBar:> I<boolean>	886	=item B<scrollBar:> I<boolean>
894		887
895	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	888	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
896	disable the scrollbar; option B<+sb>.	889	disable the scrollbar; option B<+sb>.
897		890
…		…
910	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar	903	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar
911	thumb with the pointer on middle button press/drag.	904	thumb with the pointer on middle button press/drag.
912		905
913	=item B<scrollTtyOutput:> I<boolean>	906	=item B<scrollTtyOutput:> I<boolean>
914		907
915	B<True>: scroll to bottom when tty receives output; option B<-si>.	908	B<True>: scroll to bottom when tty receives output; option B<+si>.
916	B<False>: do not scroll to bottom when tty receives output; option	909	B<False>: do not scroll to bottom when tty receives output; option
917	B<+si>.	910	B<-si>.
918		911
919	=item B<scrollWithBuffer:> I<boolean>	912	=item B<scrollWithBuffer:> I<boolean>
920		913
921	B<True>: scroll with scrollback buffer when tty receives new lines (and	914	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
922	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	915	try to show the same lines) and B<scrollTtyOutput> is False; option
923	with scrollback buffer when tty receives new lines; option B<+sw>.	916	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		917	new lines; option B<+sw>.
924		918
925	=item B<scrollTtyKeypress:> I<boolean>	919	=item B<scrollTtyKeypress:> I<boolean>
926		920
927	B<True>: scroll to bottom when a non-special key is pressed. Special keys	921	B<True>: scroll to bottom when a non-special key is pressed. Special keys
928	are those which are intercepted by rxvt-unicode for special handling and	922	are those which are intercepted by rxvt-unicode for special handling and
929	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	923	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
930	bottom when a non-special key is pressed; option B<+sk>.	924	bottom when a non-special key is pressed; option B<+sk>.
931		925
932	=item B<saveLines:> I<number>	926	=item B<saveLines:> I<number>
933		927
934	Save I<number> lines in the scrollback buffer [default 64]. This	928	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
935	resource is limited on most machines to 65535; option B<-sl>.
936		929
937	=item B<internalBorder:> I<number>	930	=item B<internalBorder:> I<number>
938		931
939	Internal border of I<number> pixels. This resource is limited to 100;	932	Internal border of I<number> pixels. This resource is limited to 100;
940	option B<-b>.	933	option B<-b>.
…		…
984	=item B<cursorBlink:> I<boolean>	977	=item B<cursorBlink:> I<boolean>
985		978
986	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	979	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
987	option B<-bc>.	980	option B<-bc>.
988		981
		982	=item B<cursorUnderline:> I<boolean>
		983
		984	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		985	option B<-uc>.
		986
989	=item B<pointerBlank:> I<boolean>	987	=item B<pointerBlank:> I<boolean>
990		988
991	B<True>: blank the pointer when a key is pressed or after a set number	989	B<True>: blank the pointer when a key is pressed or after a set number
992	of seconds of inactivity. B<False>: the pointer is always visible	990	of seconds of inactivity. B<False>: the pointer is always visible
993	[default].	991	[default].
…		…
998		996
999	=item B<pointerColor2:> I<colour>	997	=item B<pointerColor2:> I<colour>
1000		998
1001	Mouse pointer background colour.	999	Mouse pointer background colour.
1002		1000
		1001	=item B<pointerShape:> I<string>
		1002
		1003	Compile I<frills>: Specifies the name of the mouse pointer shape
		1004	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		1005	file for possible values (omit the C<XC_> prefix).
		1006
1003	=item B<pointerBlankDelay:> I<number>	1007	=item B<pointerBlankDelay:> I<number>
1004		1008
1005	Specifies number of seconds before blanking the pointer [default 2]. Use a	1009	Specifies number of seconds before blanking the pointer [default 2]. Use a
1006	large number (e.g. C<987654321>) to effectively disable the timeout.	1010	large number (e.g. C<987654321>) to effectively disable the timeout.
1007		1011
1008	=item B<backspacekey:> I<string>	1012	=item B<backspacekey:> I<string>
1009		1013
1010	The string to send when the backspace key is pressed. If set to B<DEC>	1014	The string to send when the backspace key is pressed. If set to B<DEC>
1011	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	1015	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1012	(code 8) - which can be reversed with the appropriate DEC private mode	1016	(code 8) - which can be reversed with the appropriate DEC private mode
1013	escape sequence.	1017	escape sequence.
1014		1018
1015	=item B<deletekey:> I<string>	1019	=item B<deletekey:> I<string>
1016		1020
…		…
1033		1037
1034	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1038	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1035		1039
1036	=item B<preeditType:> I<style>	1040	=item B<preeditType:> I<style>
1037		1041
1038	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1042	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1039		1043
1040	=item B<inputMethod:> I<name>	1044	=item B<inputMethod:> I<name>
1041		1045
1042	I<name> of inputMethod to use; option B<-im>.	1046	I<name> of inputMethod to use; option B<-im>.
1043		1047
…		…
1061		1065
1062	Change the meaning of triple-click selection with the left mouse	1066	Change the meaning of triple-click selection with the left mouse
1063	button. Instead of selecting a full line it will extend the selection to	1067	button. Instead of selecting a full line it will extend the selection to
1064	the end of the logical line only; option B<-tcw>.	1068	the end of the logical line only; option B<-tcw>.
1065		1069
		1070	=item B<disablePasteBrackets:> I<boolean>
		1071
		1072	Prevent emission of paste bracket sequences; option B<-dpb>.
		1073
1066	=item B<insecure:> I<boolean>	1074	=item B<insecure:> I<boolean>
1067		1075
1068	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1076	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1069	echo arbitrary strings like the icon name or the locale. This could be	1077	echo arbitrary strings like the icon name or the locale. This could be
1070	abused if somebody gets 8-bit-clean access to your display, whether	1078	abused if somebody gets 8-bit-clean access to your display, whether
1071	through a mail client displaying mail bodies unfiltered or through	1079	through a mail client displaying mail bodies unfiltered or through
1072	write(1) or any other means. Therefore, these sequences are disabled by	1080	write(1) or any other means. Therefore, these sequences are disabled by
1073	default. (Note that many other terminals, including xterm, have these	1081	default. (Note that many other terminals, including xterm, have these
…		…
1091		1099
1092	=item B<secondaryScreen:> I<boolean>	1100	=item B<secondaryScreen:> I<boolean>
1093		1101
1094	Turn on/off secondary screen (default enabled).	1102	Turn on/off secondary screen (default enabled).
1095		1103
		1104	=item B<rewrapMode:> I<mode>
		1105
		1106	Sets long line rewrap behaviour on window resize to one of B<auto>
		1107	(default), B<always> or B<never>.
		1108
1096	=item B<secondaryScroll:> I<boolean>	1109	=item B<secondaryScroll:> I<boolean>
1097		1110
1098	Turn on/off secondary screen scroll (default enabled). If this	1111	Turn on/off secondary screen scroll (default enabled). If this
1099	option is enabled, scrolls on the secondary screen will change the	1112	option is enabled, scrolls on the secondary screen will change the
1100	scrollback buffer and, when secondaryScreen is off, switching	1113	scrollback buffer and, when secondaryScreen is off, switching
…		…
1112	Sets the working directory for the shell (or the command specified via	1125	Sets the working directory for the shell (or the command specified via
1113	B<-e>). The I<path> must be an absolute path and it must exist for	1126	B<-e>). The I<path> must be an absolute path and it must exist for
1114	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1115	directory will be used; option B<-cd>.	1128	directory will be used; option B<-cd>.
1116		1129
1117	=item B<keysym.>I<sym>: I<string>	1130	=item B<keysym.>I<sym>: I<action>
1118		1131
1119	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1132	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1120	intervening resource name B<keysym.> cannot be omitted.	1133	resource name B<keysym.> cannot be omitted.
1121		1134
1122	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1135	Using this resource, you can map key combinations such as
1123	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1136	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1124	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1137	string than would normally result from that combination, making the
1125	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1138	terminal scroll up or down the way you want it, or any other thing an
1126	B<2>, B<3>, B<4>, B<5>.	1139	extension might provide.
		1140
		1141	The key combination that triggers the action, I<sym>, has the following format:
		1142
		1143	(modifiers-)key
		1144
		1145	Where I<modifiers> can be any combination of the following full or
		1146	abbreviated modifier names:
		1147
		1148	=begin table
		1149
		1150	B<ISOLevel3> B<I>
		1151	B<AppKeypad> B<K>
		1152	B<Control> B<C>
		1153	B<NumLock> B<N>
		1154	B<Shift> B<S>
		1155	B<Meta> B<M> I<or> B<A>
		1156	B<Lock> B<L>
		1157	B<Mod1> B<1>
		1158	B<Mod2> B<2>
		1159	B<Mod3> B<3>
		1160	B<Mod4> B<4>
		1161	B<Mod5> B<5>
		1162
		1163	=end table
1127		1164
1128	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1165	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1129	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1166	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1130	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1167	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1131	current application keymap mode state.	1168	current application keymap mode state.
1132		1169
1133	The spellings of I<key> can be obtained by using B<xev>(1) command or	1170	Due the the large number of modifier combinations, a key mapping will
1134	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1171	match if I<at least> the specified identifiers are being set, and no other
		1172	key mappings with those and more bits are being defined. That means that
		1173	defining a mapping for C<a> will automatically provide definitions for
		1174	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1175	themselves. See the C<builtin:> action, below, for a way to work around
		1176	this when this is a problem.
		1177
		1178	The spelling of I<key> depends on your implementation of X. An easy way to
		1179	find a key name is to use the B<xev>(1) command. You can find a list by
		1180	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1135	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1181	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1136	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1182	value (B<0x0000 - 0xFFFF>).
1137	performed in an exact manner; however, the closest match is assured.
1138		1183
1139	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1184	As with any resource value, the I<action> string may contain backslash
		1185	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1140	number), see RESOURCES in C<man 7 X> for futher details.	1186	number), see RESOURCES in C<man 7 X> for further details.
1141		1187
1142	You can define a range of keysyms in one shot by providing a I<string>	1188	An action starts with an action prefix that selects a certain type
1143	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1189	of action, followed by a colon. An action string without colons is
		1190	interpreted as a literal string to pass to the tty (as if it was
		1191	prefixed with C<string:>).
		1192
		1193	The following action prefixes are known - extensions can provide
		1194	additional prefixes:
		1195
		1196	=over
		1197
		1198	=item string:STRING
		1199
		1200	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1201	then the remaining C<STRING> will be passed to the program running in the
		1202	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1203	string C<echo rm -rf /> followed by a newline:
		1204
		1205	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1206
		1207	This could in theory be used to completely redefine your keymap.
		1208
		1209	In addition, for actions of this type, you can define a range of
		1210	keysyms in one shot by loading the C<keysym-list> perl extension and
		1211	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1144	should be a character not used by the strings.	1212	the delimiter `/' should be a character not used by the strings.
1145		1213
1146	Its usage can be demonstrated by an example:	1214	Its usage can be demonstrated by an example:
1147		1215
1148	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1216	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1149		1217
1150	The above line is equivalent to the following three lines:	1218	The above line is equivalent to the following three lines:
1151		1219
1152	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1220	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1153	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1221	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1154	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1222	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1155		1223
		1224	=item command:STRING
		1225
1156	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1226	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1157	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1227	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1228	the opposite of C<string:> - instead of sending it to the program running
		1229	in the terminal, it will be treated as if it were program output). This is
		1230	most useful to feed command sequences into @@RXVT_NAME@@.
		1231
1158	example the following means "change the current locale to C<zh_CN.GBK>	1232	For example the following means "change the current locale to C<zh_CN.GBK>
1159	when Control-Meta-c is being pressed":	1233	when Control-Meta-c is being pressed":
1160		1234
1161	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1235	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1162		1236
1163	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1237	The following example will map Control-Meta-1 and Control-Meta-2 to
1164	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1238	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1165	manpage. For example, the F<selection> extension (activated via	1239	font-switching at runtime:
1166	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1167		1240
1168	URxvt.keysym.M-C-c: perl:selection:rot13	1241	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1242	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1169		1243
1170	Due the the large number of modifier combinations, a defined key mapping	1244	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1171	will match if at I<at least> the specified identifiers are being set, and	1245	info):
1172	no other key mappings with those and more bits are being defined. That
1173	means that defining a key map for C<a> will automatically provide
1174	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1175	mappings themselves.
1176		1246
1177	Unfortunately, this will override built-in key mappings. For example	1247	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1248	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1249
		1250	=item builtin:
		1251
		1252	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1253	key binding existed for the key combination. The obvious use is to undo
		1254	the effect of existing bindings. The not so obvious use is to reinstate
		1255	bindings when another binding overrides too many modifiers.
		1256
1178	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1257	For example if you overwrite the C<Insert> key you will disable
1179	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1258	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1180	user-defined keymap using the C<builtin:> replacement:	1259	"holes" into the user-defined keymap using the C<builtin:> replacement:
1181		1260
1182	URxvt.keysym.Insert: <my insert key sequence>	1261	URxvt.keysym.Insert: <my insert key sequence>
1183	URxvt.keysym.S-Insert: builtin:	1262	URxvt.keysym.S-Insert: builtin:
1184		1263
1185	The first line defines a mapping for C<Insert> and I<any> combination	1264	The first line defines a mapping for C<Insert> and I<any> combination
1186	of modifiers. The second line re-establishes the default mapping for	1265	of modifiers. The second line re-establishes the default mapping for
1187	C<Shift-Insert>.	1266	C<Shift-Insert>.
1188		1267
1189	The following example will map Control-Meta-1 and Control-Meta-2 to	1268	=item builtin-string:
1190	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1191	font-switching at runtime:
1192		1269
1193	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1270	This action is mainly useful to restore string mappings for keys that
1194	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1271	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1272	difficult to explain - basically, this action will send the string to the
		1273	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1274	action for it.
1195		1275
1196	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1276	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1197	info):	1277	selection when you press C<Shift-Insert>. With the following bindings, it
		1278	would instead emit the (undocumented, but what applications running in the
		1279	terminal might expect) sequence C<ESC [ 2 $> instead:
1198		1280
1199	URxvt.keysym.M-C-3: command:\033[8;25;80t	1281	URxvt.keysym.S-Insert: builtin-string:
1200	URxvt.keysym.M-C-4: command:\033[8;48;110t	1282	URxvt.keysym.C-S-Insert: builtin:
		1283
		1284	The first line disables the paste functionality for that key
		1285	combination, and the second reinstates the default behaviour for
		1286	C<Control-Shift-Insert>, which would otherwise be overridden.
		1287
		1288	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1289	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1290	this:
		1291
		1292	URxvt.keysym.C-M-c: builtin-string:
		1293	URxvt.keysym.C-M-v: builtin-string:
		1294
		1295	=item EXTENSION:STRING
		1296
		1297	An action of this form invokes the action B<STRING>, if any, provided
		1298	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1299	be loaded automatically if necessary.
		1300
		1301	Not all extensions define actions, but popular extensions that do
		1302	include the I<selection> and I<matcher> extensions (documented in their
		1303	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1304	respectively).
		1305
		1306	From the silly examples department, this will rot13-"encrypt"
		1307	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1308	keyboards:
		1309
		1310	URxvt.keysym.M-C-c: selection:rot13
		1311
		1312	=item perl:STRING DEPRECATED
		1313
		1314	This is a deprecated way of invoking commands provided by perl
		1315	extensions. It is still supported, but should not be used anymore.
		1316
		1317	=back
1201		1318
1202	=item B<perl-ext-common>: I<string>	1319	=item B<perl-ext-common>: I<string>
1203		1320
1204	=item B<perl-ext>: I<string>	1321	=item B<perl-ext>: I<string>
1205		1322
1206	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1323	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1207	use in this terminal instance; option B<-pe>.	1324	use in this terminal instance; option B<-pe>.
1208		1325
1209	Extension names can be prefixed with a C<-> sign to prohibit using	1326	Extension names can be prefixed with a C<-> sign to remove them again, in
1210	them. This can be useful to selectively disable some extensions loaded	1327	case they had been specified earlier. This can be useful to selectively
1211	by default, or specified via the C<perl-ext-common> resource. For	1328	disable some extensions loaded by default, or specified via the
1212	example, C<default,-selection> will use all the default extension except	1329	C<perl-ext-common> resource. For example, C<default,-selection> will use
1213	C<selection>.	1330	all the default extensions except C<selection>.
1214		1331
1215	Extension names can also be followed by an argument in angle brackets	1332	To prohibit autoloading of extensions, you can prefix them with C</>,
1216	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1333	which will make urxvt refuse to automatically load them (this can be
1217	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1334	overridden, however, by specifying the extension name again without a
1218	multiple times with different arguments will pass multiple arguments to	1335	prefix, though). This does not prohibit extensions themselves loading
1219	the extension.	1336	other extensions. For example, C<default,/background> will keep the
		1337	C<background> extension from being loaded when a background OSC sequence
		1338	is received.
		1339
		1340	The default set includes the C<selection>, C<option-popup>,
		1341	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1342	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1343	in B<keysym> resources.
		1344
		1345	Any extension such that a corresponding resource is given on the
		1346	command line is automatically appended to B<perl-ext>.
1220		1347
1221	Each extension is looked up in the library directories, loaded if	1348	Each extension is looked up in the library directories, loaded if
1222	necessary, and bound to the current terminal instance.	1349	necessary, and bound to the current terminal instance. When the library
		1350	search path contains multiple extension files of the same name, then the
		1351	first one found will be used.
1223		1352
1224	If both of these resources are the empty string, then the perl	1353	If both of these resources are the empty string, then the perl interpreter
1225	interpreter will not be initialized. The idea behind two options is that	1354	will not be initialized. The rationale for having two options is that
1226	B<perl-ext-common> will be used for extensions that should be available to	1355	B<perl-ext-common> will be used for extensions that should be available to
1227	all instances, while B<perl-ext> is used for specific instances.	1356	all instances, while B<perl-ext> is used for specific instances.
1228		1357
1229	=item B<perl-eval>: I<string>	1358	=item B<perl-eval>: I<string>
1230		1359
1231	Perl code to be evaluated when all extensions have been registered. See	1360	Perl code to be evaluated when all extensions have been registered. See
1232	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1361	the @@RXVT_NAME@@perl(3) manpage.
1233	will be ignored when running setuid/setgid.
1234		1362
1235	=item B<perl-lib>: I<path>	1363	=item B<perl-lib>: I<path>
1236		1364
1237	Colon-separated list of additional directories that hold extension	1365	Colon-separated list of additional directories that hold extension
1238	scripts. When looking for extensions specified by the C<perl> resource,	1366	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239	@@RXVT_NAME@@ will first look in these directories and then in	1367	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1368	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241	will be ignored when running setuid/setgid.
1242		1369
1243	See the @@RXVT_NAME@@perl(3) manpage.	1370	See the @@RXVT_NAME@@perl(3) manpage.
1244		1371
1245	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1372	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1246		1373
…		…
1250	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1377	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1251		1378
1252	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1379	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1253	for details.	1380	for details.
1254		1381
1255	=item B<searchable-scrollback:> I<keysym>	1382	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1256		1383
1257	Sets the hotkey that starts the incremental scrollback buffer search	1384	This resource is deprecated and will be removed. Use a B<keysym> resource
1258	(default: C<M-s>).	1385	instead, e.g.:
1259		1386
		1387	URxvt.keysym.M-s: searchable-scrollback:start
		1388
1260	=item B<urlLauncher>: I<string>	1389	=item B<url-launcher>: I<string>
1261		1390
1262	Specifies the program to be started with a URL argument. Used by the	1391	Specifies the program to be started with a URL argument. Used by the
1263	C<selection-popup> and C<matcher> perl extensions.	1392	C<selection-popup> and C<matcher> perl extensions.
1264		1393
1265	=item B<transient-for>: I<windowid>	1394	=item B<transient-for>: I<windowid>
…		…
1268		1397
1269	=item B<override-redirect>: I<boolean>	1398	=item B<override-redirect>: I<boolean>
1270		1399
1271	Compile I<frills>: Sets override-redirect for the terminal window, making	1400	Compile I<frills>: Sets override-redirect for the terminal window, making
1272	it almost invisible to window managers; option B<-override-redirect>.	1401	it almost invisible to window managers; option B<-override-redirect>.
		1402
		1403	=item B<iso14755:> I<boolean>
		1404
		1405	Turn on/off ISO 14755 (default enabled).
1273		1406
1274	=item B<iso14755_52:> I<boolean>	1407	=item B<iso14755_52:> I<boolean>
1275		1408
1276	Turn on/off ISO 14755 5.2 mode (default enabled).	1409	Turn on/off ISO 14755 5.2 mode (default enabled).
1277		1410
…		…
1305	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1438	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1306		1439
1307	The behaviour of text selection and insertion/pasting mechanism is similar	1440	The behaviour of text selection and insertion/pasting mechanism is similar
1308	to I<xterm>(1).	1441	to I<xterm>(1).
1309		1442
1310	=over 4	1443	=over
1311		1444
1312	=item B<Selecting>:	1445	=item B<Selecting>:
1313		1446
1314	Left click at the beginning of the region, drag to the end of the region	1447	Left click at the beginning of the region, drag to the end of the region
1315	and release; Right click to extend the marked region; Left double-click	1448	and release; Right click to extend the marked region; Left double-click
…		…
1330	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1463	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1331		1464
1332	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1465	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1333	inserted too.	1466	inserted too.
1334		1467
		1468	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1469	B<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1470	binding causes the value of the internal selection to be copied to the
		1471	CLIPBOARD selection, while the second binding causes the value of the
		1472	CLIPBOARD selection to be inserted.
		1473
1335	=back	1474	=back
1336		1475
1337	=head1 CHANGING FONTS	1476	=head1 CHANGING FONTS
1338		1477
1339	Changing fonts (or font sizes, respectively) via the keypad is not yet	1478	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1356	and character codes using the keyboard. It consists of 4 parts. The	1495	and character codes using the keyboard. It consists of 4 parts. The
1357	first part is available if rxvt-unicode has been compiled with	1496	first part is available if rxvt-unicode has been compiled with
1358	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1497	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1359	with C<--enable-iso14755>.	1498	with C<--enable-iso14755>.
1360		1499
1361	=over 4	1500	=over
1362		1501
1363	=item * 5.1: Basic method	1502	=item * 5.1: Basic method
1364		1503
1365	This allows you to enter unicode characters using their hexcode.	1504	This allows you to enter unicode characters using their hexcode.
1366		1505
…		…
1420	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1559	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1421	it can be seen via the I<who(1)> command, and can accept messages. To	1560	it can be seen via the I<who(1)> command, and can accept messages. To
1422	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1561	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1423	on some systems or setgid to root or to some other group on others.	1562	on some systems or setgid to root or to some other group on others.
1424		1563
1425	=head1 COLORS AND GRAPHICS	1564	=head1 COLOURS AND GRAPHICS
1426		1565
1427	In addition to the default foreground and background colours,	1566	In addition to the default foreground and background colours,
1428	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1567	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1429	high-intensity bold/blink versions of the same). Here is a list of the	1568	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1430	colours with their names.	1569	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1570	cube plus a 8 (24) colour greyscale ramp.
		1571
		1572	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1573	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1574	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1575	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1576	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1577	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1578	use many similar 24-bit colours. It's typically not a problem in common
		1579	scenarios.
		1580
		1581	Here is a list of the ANSI colours with their names.
1431		1582
1432	=begin table	1583	=begin table
1433		1584
1434	B<color0> (black) = Black	1585	B<color0> (black) = Black
1435	B<color1> (red) = Red3	1586	B<color1> (red) = Red3
…		…
1455	It is also possible to specify the colour values of B<foreground>,	1606	It is also possible to specify the colour values of B<foreground>,
1456	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1607	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1457	a number 0-15, as a convenient shorthand to reference the colour name of	1608	a number 0-15, as a convenient shorthand to reference the colour name of
1458	color0-color15.	1609	color0-color15.
1459		1610
1460	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1611	The following text gives values for the standard 88 colour mode (and
1461	additional 72 colours. The first 64 of those (with indices 16 to 79)	1612	values for the 256 colour mode in parentheses).
1462	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1463	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1464		1613
		1614	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1615
		1616	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1617	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1618
		1619	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1620	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1621	the RGB cube.
		1622
1465	Together, all those colours implement the 88 colour xterm colours. Only	1623	Together, all those colours implement the 88 (256) colour xterm
1466	the first 16 can be changed using resources currently, the rest can only	1624	colours. Only the first 16 can be changed using resources currently, the
1467	be changed via command sequences ("escape codes").	1625	rest can only be changed via command sequences ("escape codes").
		1626
		1627	Applications are advised to use terminfo or command sequences to discover
		1628	number and RGB values of all colours (yes, you can query this...).
1468		1629
1469	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1630	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1470	always swapping the foreground/background colours. This is in contrast to	1631	always swapping the foreground/background colours. This is in contrast to
1471	I<xterm>(1) where the colours are only swapped if they have not otherwise	1632	I<xterm>(1) where the colours are only swapped if they have not otherwise
1472	been specified. For example,	1633	been specified. For example,
1473		1634
1474	=over 4
1475
1476	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1635	@@RXVT_NAME@@ -fg Black -bg White -rv
1477		1636
1478	would yield White on Black, while on I<xterm>(1) it would yield Black	1637	would yield White on Black, while on I<xterm>(1) it would yield Black on
1479	on White.	1638	White.
1480
1481	=back
1482		1639
1483	=head2 ALPHA CHANNEL SUPPORT	1640	=head2 ALPHA CHANNEL SUPPORT
1484		1641
1485	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1642	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1486	their act together, rxvt-unicode will do it's own alpha channel management:	1643	their act together, rxvt-unicode will do its own alpha channel management:
1487		1644
1488	You can prefix any color with an opaquenes percentage enclosed in	1645	You can prefix any colour with an opaqueness percentage enclosed in
1489	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1646	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1490	(0-100) that specifies the opacity of the color, where C<0> is completely	1647	(0-100) that specifies the opacity of the colour, where C<0> is completely
1491	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1648	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1492	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1649	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1493	is the recommended format to specify transparency values, and works with	1650	is the recommended format to specify transparency values, and works with
1494	all ways to specify a colour.	1651	all ways to specify a colour.
1495		1652
…		…
1528		1685
1529	=head1 ENVIRONMENT	1686	=head1 ENVIRONMENT
1530		1687
1531	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1688	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1532		1689
1533	=over 4	1690	=over
1534		1691
1535	=item B<TERM>	1692	=item B<TERM>
1536		1693
1537	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1694	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1538	resources or on the command line.	1695	resources or on the command line.
…		…
1573		1730
1574	=item B<SHELL>	1731	=item B<SHELL>
1575		1732
1576	The shell to be used for command execution, defaults to C</bin/sh>.	1733	The shell to be used for command execution, defaults to C</bin/sh>.
1577		1734
1578	=item B<RXVT_SOCKET>	1735	=item B<RXVT_SOCKET> [I<sic>]
1579		1736
1580	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1737	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1581	@@RXVT_NAME@@d(1).	1738	@@RXVT_NAME@@d(1).
1582		1739
1583	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1740	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1741
		1742	=item B<URXVT_PERL_LIB>
		1743
		1744	Additional F<:>-separated library search path for perl extensions. Will be
		1745	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1746	directory.
		1747
		1748	=item B<URXVT_PERL_VERBOSITY>
		1749
		1750	See L<@@RXVT_NAME@@perl>(3).
1584		1751
1585	=item B<HOME>	1752	=item B<HOME>
1586		1753
1587	Used to locate the default directory for the unix domain socket for	1754	Used to locate the default directory for the unix domain socket for
1588	daemon communications and to locate various resource files (such as	1755	daemon communications and to locate various resource files (such as
1589	C<.Xdefaults>)	1756	C<.Xdefaults>)
1590		1757
1591	=item B<XAPPLRESDIR>	1758	=item B<XAPPLRESDIR>
1592		1759
1593	Directory where various X resource files are being located.	1760	Directory where application-specific X resource files are located.
1594		1761
1595	=item B<XENVIRONMENT>	1762	=item B<XENVIRONMENT>
1596		1763
1597	If set and accessible, gives the name of a X resource file to be loaded by	1764	If set and accessible, gives the name of a X resource file to be loaded by
1598	@@RXVT_NAME@@.	1765	@@RXVT_NAME@@.
1599		1766
1600	=back	1767	=back
1601		1768
1602	=head1 FILES	1769	=head1 FILES
1603		1770
1604	=over 4	1771	=over
1605		1772
1606	=item B</usr/lib/X11/rgb.txt>	1773	=item B</usr/lib/X11/rgb.txt>
1607		1774
1608	Color names.	1775	Colour names.
1609		1776
1610	=back	1777	=back
1611		1778
1612	=head1 SEE ALSO	1779	=head1 SEE ALSO
1613		1780
		1781	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1614	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1782	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1615		1783
1616	=head1 CURRENT PROJECT COORDINATOR	1784	=head1 CURRENT PROJECT COORDINATOR
1617		1785
1618	=over 4	1786	=over
1619		1787
1620	=item Project Coordinator	1788	=item Project Coordinator
1621		1789
1622	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1790	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1623		1791
1624	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1792	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1625		1793
1626	=back	1794	=back
1627		1795
1628	=head1 AUTHORS	1796	=head1 AUTHORS
1629		1797
1630	=over 4	1798	=over
1631		1799
1632	=item John Bovey	1800	=item John Bovey
1633		1801
1634	University of Kent, 1992, wrote the original Xvt.	1802	University of Kent, 1992, wrote the original Xvt.
1635		1803
1636	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1804	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1637		1805
1638	very heavily modified Xvt and came up with Rxvt	1806	very heavily modified Xvt and came up with Rxvt
1639		1807
1640	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1808	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1641		1809
1642	wrote the Greek Keyboard Input (no longer in code)	1810	wrote the Greek Keyboard Input (no longer in code)
1643		1811
1644	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1812	=item mj olesen <olesen@me.QueensU.CA>
1645		1813
1646	Wrote the menu system.	1814	Wrote the menu system.
1647		1815
1648	Project Coordinator (changes.txt 2.11 to 2.21)	1816	Project Coordinator (changes.txt 2.11 to 2.21)
1649		1817
1650	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1818	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1651		1819
1652	Project Coordinator (changes.txt 2.21a to 2.4.5)	1820	Project Coordinator (changes.txt 2.21a to 2.4.5)
1653		1821
1654	=item Geoff Wing L<< <gcw@pobox.com> >>	1822	=item Geoff Wing <gcw@pobox.com>
1655		1823
1656	Rewrote screen display and text selection routines.	1824	Rewrote screen display and text selection routines.
1657		1825
1658	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1826	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1659		1827
1660	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1828	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1661		1829
1662	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1830	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1663	extension, random hacks, numerous bugfixes and extensions.	1831	extension, random hacks, numerous bugfixes and extensions.
1664		1832
1665	Project Coordinator (Changes 1.0 -)	1833	Project Coordinator (Changes 1.0 -)
1666		1834
1667	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1835	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1668		1836
1669	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1837	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1670		1838
1671	=back	1839	=back
1672		1840

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs. Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.164 by root, Sun Jun 15 13:54:15 2008 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC