[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.217 by root, Tue Jun 5 21:51:23 2012 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

…		…
84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1	84	far greater than those listed. For example: `@@RXVT_NAME@@ --loginShell --color1
85	Orange'.	85	Orange'.
86		86
87	The following options are available:	87	The following options are available:
88		88
89	=over 4	89	=over
90		90
91	=item B<-help>, B<--help>	91	=item B<-help>, B<--help>
92		92
93	Print out a message describing available options.	93	Print out a message describing available options.
94		94
…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126		132
127	=item B<-tr>\|B<+tr>	133	=item B<-fps> I<number>
128		134
129	Turn on/off pseudo-transparency by using the root pixmap as background; resource B<transparent>.	135	Compile I<frills>: Set the refresh interval (in frames per second or
130		136	negative seconds); resource B<refreshRate>.
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133		137
134	=item B<-fade> I<number>	138	=item B<-fade> I<number>
135		139
136	Fade the text by the given percentage when focus is lost. Small values	140	Fade the text by the given percentage when focus is lost. Small values
137	fade a little only, 100 completely replaces all colours by the fade	141	fade a little only, 100 completely replaces all colours by the fade
…		…
140	=item B<-fadecolor> I<colour>	144	=item B<-fadecolor> I<colour>
141		145
142	Fade to this colour when fading is used (see B<-fade>). The default colour	146	Fade to this colour when fading is used (see B<-fade>). The default colour
143	is opaque black. resource B<fadeColor>.	147	is opaque black. resource B<fadeColor>.
144		148
145	=item B<-tint> I<colour>
146
147	Tint the transparent background with the given colour;
148	resource I<tintColor>.
149
150	=item B<-sh> I<number>
151
152	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
153	A value of 100 means no shading; resource I<shading>.
154
155	=item B<-blr> I<HxV>
156
157	Apply Gaussian Blur with the specified radii to the transparent
158	background. If a single number is specified, the vertical and
159	horizontal radii are considered to be the same. Setting one of the
160	radii to 1 and the other to a large number creates interesting effects
161	on some backgrounds. The maximum radius value is 128. An horizontal or
162	vertical radius of 0 disables blurring;
163	resource I<blurRadius>.
164
165	=item B<-icon> I<file>	149	=item B<-icon> I<file>
166		150
167	Compile I<pixbuf>: Use the specified image as application icon. This	151	Compile I<pixbuf>: Use the specified image as application icon. This
168	is used by many window managers, taskbars and pagers to represent the	152	is used by many window managers, taskbars and pagers to represent the
169	application window; resource I<iconFile>.	153	application window; resource I<iconFile>.
…		…
173	Window background colour; resource B<background>.	157	Window background colour; resource B<background>.
174		158
175	=item B<-fg> I<colour>	159	=item B<-fg> I<colour>
176		160
177	Window foreground colour; resource B<foreground>.	161	Window foreground colour; resource B<foreground>.
178
179	=item B<-pixmap> I<file[;oplist]>
180
181	Compile I<pixbuf>: Specify image file for the background and also
182	optionally specify a list of operations to modify it. Note you may need to
183	add quotes to avoid special shell interpretation of the C<;> in the
184	command-line; for more details see resource B<backgroundPixmap>.
185		162
186	=item B<-cr> I<colour>	163	=item B<-cr> I<colour>
187		164
188	The cursor colour; resource B<cursorColor>.	165	The cursor colour; resource B<cursorColor>.
189		166
…		…
248		225
249	=item B<-ls>\|B<+ls>	226	=item B<-ls>\|B<+ls>
250		227
251	Start as a login-shell/sub-shell; resource B<loginShell>.	228	Start as a login-shell/sub-shell; resource B<loginShell>.
252		229
		230	=item B<-mc> I<milliseconds>
		231
		232	Specify the maximum time between multi-click selections.
		233
253	=item B<-ut>\|B<+ut>	234	=item B<-ut>\|B<+ut>
254		235
255	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	236	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
256	B<utmpInhibit>.	237	B<utmpInhibit>.
257		238
…		…
335		316
336	=item B<-override-redirect>	317	=item B<-override-redirect>
337		318
338	Compile I<frills>: Sets override-redirect on the window; resource	319	Compile I<frills>: Sets override-redirect on the window; resource
339	B<override-redirect>.	320	B<override-redirect>.
		321
		322	=item B<-dockapp>
		323
		324	Sets the initial state of the window to WithdrawnState, which makes
		325	window managers that support this extension treat it as a dockapp.
340		326
341	=item B<-sbg>	327	=item B<-sbg>
342		328
343	Compile I<frills>: Disable the usage of the built-in block graphics/line	329	Compile I<frills>: Disable the usage of the built-in block graphics/line
344	drawing characters and just rely on what the specified fonts provide. Use	330	drawing characters and just rely on what the specified fonts provide. Use
…		…
399	=item B<-pt> I<style>	385	=item B<-pt> I<style>
400		386
401	Compile I<XIM>: input style for input method; B<OverTheSpot>,	387	Compile I<XIM>: input style for input method; B<OverTheSpot>,
402	B<OffTheSpot>, B<Root>; resource B<preeditType>.	388	B<OffTheSpot>, B<Root>; resource B<preeditType>.
403		389
		390	If the perl extension C<xim-onthespot> is used (which is the default),
		391	then additionally the C<OnTheSpot> preedit type is available.
		392
404	=item B<-im> I<text>	393	=item B<-im> I<text>
405		394
406	Compile I<XIM>: input method name. resource B<inputMethod>.	395	Compile I<XIM>: input method name. resource B<inputMethod>.
407		396
408	=item B<-imlocale> I<string>	397	=item B<-imlocale> I<string>
…		…
422	Change the meaning of triple-click selection with the left mouse	411	Change the meaning of triple-click selection with the left mouse
423	button. Only effective when the original (non-perl) selection code is	412	button. Only effective when the original (non-perl) selection code is
424	in-use. Instead of selecting a full line it will extend the selection to	413	in-use. Instead of selecting a full line it will extend the selection to
425	the end of the logical line only. resource B<tripleclickwords>.	414	the end of the logical line only. resource B<tripleclickwords>.
426		415
		416	=item B<-dpb>\|B<+dpb>
		417
		418	Compile frills: Disable (or enable) emitting bracketed paste mode
		419	sequences (default enabled). Bracketed paste mode allows programs
		420	to detect when something is pasted. Since more and more programs
		421	abuse this, these sequences can be disabled. The command sequences to
		422	enable and query paste mode will still work, but the actual bracket
		423	sequences will no longer be emitted. You can also toggle this from the
		424	ctrl-middle-mouse-button menu; resource B<disablePasteBrackets>.
		425
427	=item B<-insecure>	426	=item B<-insecure>
428		427
429	Enable "insecure" mode, which currently enables most of the escape	428	Enable "insecure" mode, which currently enables most of the escape
430	sequences that echo strings. See the resource B<insecure> for more	429	sequences that echo strings. See the resource B<insecure> for more
431	info.	430	info.
…		…
443		442
444	=item B<-ssr>\|B<+ssr>	443	=item B<-ssr>\|B<+ssr>
445		444
446	Turn on/off secondary screen scroll (default enabled); resource	445	Turn on/off secondary screen scroll (default enabled); resource
447	B<secondaryScroll>.	446	B<secondaryScroll>.
		447
		448	=item B<-rm> I<mode>
		449
		450	Compile I<frills>: Sets long line rewrapping behaviour on window resizes
		451	to one of B<auto> (the default), B<always> or B<never>. The latter two
		452	modes do the obvious, B<auto> rewraps (acts like B<always>) if scrollback
		453	is non-empty, and wings lines (acts like B<never>) otherwise; resource
		454	B<rewrapMode>.
448		455
449	=item B<-hold>\|B<+hold>	456	=item B<-hold>\|B<+hold>
450		457
451	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	458	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
452	will not immediately destroy its window when the program executed within	459	will not immediately destroy its window when the program executed within
…		…
530	close $pty;	537	close $pty;
531		538
532	# now communicate with rxvt	539	# now communicate with rxvt
533	my $slave = $pty->slave;	540	my $slave = $pty->slave;
534	while (<$slave>) { print $slave "got <$_>\n" }	541	while (<$slave>) { print $slave "got <$_>\n" }
		542
		543	Note that, despite what the name might imply, the file descriptor does not
		544	need to be a pty, it can be a bi-directional pipe as well (e.g. a unix
		545	domain or tcp socket). While tty operations cannot be done in this case,
		546	B<@@RXVT_NAME@@> can still be remote controlled with it:
		547
		548	use Socket;
		549	use Fcntl;
		550
		551	socketpair my $URXVT, my $slave, Socket::AF_UNIX, Socket::SOCK_STREAM, Socket::PF_UNSPEC;
		552	fcntl $slave, Fcntl::F_SETFD, 0;
		553	system "exec @@RXVT_NAME@@ -pty-fd " . (fileno $slave) . " &";
		554	close $slave;
		555
		556	syswrite $URXVT, "Type a secret password: ";
		557	my $secret = do { local $/ = "\r"; <$URXVT> };
		558	print "Not so secret anymore: $secret\n";
535		559
536	=item B<-pe> I<string>	560	=item B<-pe> I<string>
537		561
538	Comma-separated list of perl extension scripts to use (or not to use) in	562	Comma-separated list of perl extension scripts to use (or not to use) in
539	this terminal instance. See resource B<perl-ext> for details.	563	this terminal instance. See resource B<perl-ext> for details.
…		…
567	be used. Command-line arguments can be used to override resource	591	be used. Command-line arguments can be used to override resource
568	settings. The following resources are supported (you might want to	592	settings. The following resources are supported (you might want to
569	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl	593	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
570	extensions not documented here):	594	extensions not documented here):
571		595
572	=over 4	596	=over
573		597
574	=item B<depth:> I<bitdepth>	598	=item B<depth:> I<bitdepth>
575		599
576	Compile I<xft>: Attempt to find a visual with the given bit depth;	600	Compile I<xft>: Attempt to find a visual with the given bit depth;
577	option B<-depth>.	601	option B<-depth>.
…		…
678		702
679	B<False>: specify that everything is to be displayed, even	703	B<False>: specify that everything is to be displayed, even
680	if the refresh is too fast for the human eye to read anything (or the	704	if the refresh is too fast for the human eye to read anything (or the
681	monitor to display anything); option B<+ss>.	705	monitor to display anything); option B<+ss>.
682		706
683	=item B<transparent:> I<boolean>	707	=item B<refreshRate:> I<number>
684		708
685	Turn on/off pseudo-transparency by using the root pixmap as background.	709	Compile I<frills>: When positive, sets the maximum refreshes per second
686		710	(the default is C<60>). When zero or negative, sets the minimum interval
687	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in	711	between refreshes, negated. That is, positive numbers limit the number
688	future versions.	712	of refreshes per second to that number, similar to a fps limiter in
		713	games. A negative number gets negated and directly sets the minimum
		714	interval between refreshes, that is, C<10> and C<-0.1> both specify
		715	the same refresh interval (likewise C<50> and C<0.02>). Finally, zero
		716	makes @@RXVT_NAME@@ refresh as fast as possible. Fractional values are
		717	supported; option B<-fps>.
689		718
690	=item B<fading:> I<number>	719	=item B<fading:> I<number>
691		720
692	Fade the text by the given percentage when focus is lost; option B<-fade>.	721	Fade the text by the given percentage when focus is lost; option B<-fade>.
693		722
694	=item B<fadeColor:> I<colour>	723	=item B<fadeColor:> I<colour>
695		724
696	Fade to this colour, when fading is used (see B<fading:>). The default	725	Fade to this colour, when fading is used (see B<fading:>). The default
697	colour is black; option B<-fadecolor>.	726	colour is black; option B<-fadecolor>.
698		727
699	=item B<tintColor:> I<colour>
700
701	Tint the transparent background with the given colour. If the RENDER
702	extension is not available only black, red, green, yellow, blue,
703	magenta, cyan and white tints can be performed server-side. Note that
704	a black tint yields a completely black image while a white tint yields
705	the image unchanged; option B<-tint>.
706
707	=item B<shading:> I<number>
708
709	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
710	A value of 100 means no shading; option B<-sh>.
711
712	=item B<blurRadius:> I<number>
713
714	Apply gaussian blur with the specified radius to the transparent
715	background; option B<-blr>.
716
717	=item B<iconFile:> I<file>	728	=item B<iconFile:> I<file>
718		729
719	Set the application icon pixmap; option B<-icon>.	730	Set the application icon pixmap; option B<-icon>.
720		731
721	=item B<scrollColor:> I<colour>	732	=item B<scrollColor:> I<colour>
…		…
729		740
730	=item B<borderColor:> I<colour>	741	=item B<borderColor:> I<colour>
731		742
732	The colour of the border around the text area and between the scrollbar	743	The colour of the border around the text area and between the scrollbar
733	and the text.	744	and the text.
734
735	=item B<backgroundPixmap:> I<file[;oplist]>
736
737	Use the specified image file for the background and also
738	optionally specify a colon separated list of operations to modify it.
739	Supported operations are:
740
741	=over 4
742
743	=item B<WxH+X+Y>
744
745	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
746	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
747	scale of 0 disables scaling.
748
749	=item B<op=tile>
750
751	enables tiling
752
753	=item B<op=keep-aspect>
754
755	maintain the image aspect ratio when scaling
756
757	=item B<op=root-align>
758
759	use the position of the terminal window relative to the root window as
760	the image offset, simulating a root window background
761
762	=back
763
764	The default scale and position setting is C<100x100+50+50>.
765	Alternatively, a predefined set of templates can be used to achieve
766	the most common setups:
767
768	=over 4
769
770	=item B<style=tiled>
771
772	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
773
774	=item B<style=aspect-stretched>
775
776	the image is scaled to fill the whole window maintaining the aspect
777	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
778
779	=item B<style=stretched>
780
781	the image is scaled to fill the whole window. Equivalent to 100x100
782
783	=item B<style=centered>
784
785	the image is centered with no scaling. Equivalent to 0x0+50+50
786
787	=item B<style=root-tiled>
788
789	the image is tiled with no scaling and using 'root' positioning.
790	Equivalent to 0x0:op=tile:op=root-align
791
792	=back
793
794	If multiple templates are specified the last one wins. Note that a
795	template overrides all the scale, position and operations settings.
796
797	If used in conjunction with B<-tr> option, the specified pixmap will be
798	blended over the transparent background using alpha-blending.
799
800	=item B<path:> I<path>
801
802	Specify the colon-delimited search path for finding background image files.
803		745
804	=item B<font:> I<fontlist>	746	=item B<font:> I<fontlist>
805		747
806	Select the fonts to be used. This is a comma separated list of font names	748	Select the fonts to be used. This is a comma separated list of font names
807	that are checked in order when trying to find glyphs for characters. The	749	that are checked in order when trying to find glyphs for characters. The
…		…
904		846
905	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	847	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
906	the shell; option B<-ls>. B<False>: start as a normal sub-shell	848	the shell; option B<-ls>. B<False>: start as a normal sub-shell
907	[default]; option B<+ls>.	849	[default]; option B<+ls>.
908		850
		851	=item B<multiClickTime:> I<number>
		852
		853	Specify the maximum time in milliseconds between multi-click select
		854	events. The default is 500 milliseconds; option B<-mc>.
		855
909	=item B<utmpInhibit:> I<boolean>	856	=item B<utmpInhibit:> I<boolean>
910		857
911	B<True>: inhibit writing record into the system log file B<utmp>;	858	B<True>: inhibit writing record into the system log file B<utmp>;
912	option B<-ut>. B<False>: write record into the system log file B<utmp>	859	option B<-ut>. B<False>: write record into the system log file B<utmp>
913	[default]; option B<+ut>.	860	[default]; option B<+ut>.
…		…
956	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar	903	Align the B<top>, B<bottom> or B<centre> [default] of the scrollbar
957	thumb with the pointer on middle button press/drag.	904	thumb with the pointer on middle button press/drag.
958		905
959	=item B<scrollTtyOutput:> I<boolean>	906	=item B<scrollTtyOutput:> I<boolean>
960		907
961	B<True>: scroll to bottom when tty receives output; option B<-si>.	908	B<True>: scroll to bottom when tty receives output; option B<+si>.
962	B<False>: do not scroll to bottom when tty receives output; option	909	B<False>: do not scroll to bottom when tty receives output; option
963	B<+si>.	910	B<-si>.
964		911
965	=item B<scrollWithBuffer:> I<boolean>	912	=item B<scrollWithBuffer:> I<boolean>
966		913
967	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.	914	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
968	try to show the same lines) and B<scrollTtyOutput> is False; option	915	try to show the same lines) and B<scrollTtyOutput> is False; option
…		…
976	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	923	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
977	bottom when a non-special key is pressed; option B<+sk>.	924	bottom when a non-special key is pressed; option B<+sk>.
978		925
979	=item B<saveLines:> I<number>	926	=item B<saveLines:> I<number>
980		927
981	Save I<number> lines in the scrollback buffer [default 64]. This	928	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
982	resource is limited on most machines to 65535; option B<-sl>.
983		929
984	=item B<internalBorder:> I<number>	930	=item B<internalBorder:> I<number>
985		931
986	Internal border of I<number> pixels. This resource is limited to 100;	932	Internal border of I<number> pixels. This resource is limited to 100;
987	option B<-b>.	933	option B<-b>.
…		…
1050		996
1051	=item B<pointerColor2:> I<colour>	997	=item B<pointerColor2:> I<colour>
1052		998
1053	Mouse pointer background colour.	999	Mouse pointer background colour.
1054		1000
		1001	=item B<pointerShape:> I<string>
		1002
		1003	Compile I<frills>: Specifies the name of the mouse pointer shape
		1004	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		1005	file for possible values (omit the C<XC_> prefix).
		1006
1055	=item B<pointerBlankDelay:> I<number>	1007	=item B<pointerBlankDelay:> I<number>
1056		1008
1057	Specifies number of seconds before blanking the pointer [default 2]. Use a	1009	Specifies number of seconds before blanking the pointer [default 2]. Use a
1058	large number (e.g. C<987654321>) to effectively disable the timeout.	1010	large number (e.g. C<987654321>) to effectively disable the timeout.
1059		1011
…		…
1085		1037
1086	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	1038	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1087		1039
1088	=item B<preeditType:> I<style>	1040	=item B<preeditType:> I<style>
1089		1041
1090	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	1042	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1091		1043
1092	=item B<inputMethod:> I<name>	1044	=item B<inputMethod:> I<name>
1093		1045
1094	I<name> of inputMethod to use; option B<-im>.	1046	I<name> of inputMethod to use; option B<-im>.
1095		1047
…		…
1113		1065
1114	Change the meaning of triple-click selection with the left mouse	1066	Change the meaning of triple-click selection with the left mouse
1115	button. Instead of selecting a full line it will extend the selection to	1067	button. Instead of selecting a full line it will extend the selection to
1116	the end of the logical line only; option B<-tcw>.	1068	the end of the logical line only; option B<-tcw>.
1117		1069
		1070	=item B<disablePasteBrackets:> I<boolean>
		1071
		1072	Prevent emission of paste bracket sequences; option B<-dpb>.
		1073
1118	=item B<insecure:> I<boolean>	1074	=item B<insecure:> I<boolean>
1119		1075
1120	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	1076	Enable "insecure" mode. Rxvt-unicode offers some escape sequences that
1121	echo arbitrary strings like the icon name or the locale. This could be	1077	echo arbitrary strings like the icon name or the locale. This could be
1122	abused if somebody gets 8-bit-clean access to your display, whether	1078	abused if somebody gets 8-bit-clean access to your display, whether
1123	through a mail client displaying mail bodies unfiltered or through	1079	through a mail client displaying mail bodies unfiltered or through
1124	write(1) or any other means. Therefore, these sequences are disabled by	1080	write(1) or any other means. Therefore, these sequences are disabled by
1125	default. (Note that many other terminals, including xterm, have these	1081	default. (Note that many other terminals, including xterm, have these
…		…
1143		1099
1144	=item B<secondaryScreen:> I<boolean>	1100	=item B<secondaryScreen:> I<boolean>
1145		1101
1146	Turn on/off secondary screen (default enabled).	1102	Turn on/off secondary screen (default enabled).
1147		1103
		1104	=item B<rewrapMode:> I<mode>
		1105
		1106	Sets long line rewrap behaviour on window resize to one of B<auto>
		1107	(default), B<always> or B<never>.
		1108
1148	=item B<secondaryScroll:> I<boolean>	1109	=item B<secondaryScroll:> I<boolean>
1149		1110
1150	Turn on/off secondary screen scroll (default enabled). If this	1111	Turn on/off secondary screen scroll (default enabled). If this
1151	option is enabled, scrolls on the secondary screen will change the	1112	option is enabled, scrolls on the secondary screen will change the
1152	scrollback buffer and, when secondaryScreen is off, switching	1113	scrollback buffer and, when secondaryScreen is off, switching
…		…
1164	Sets the working directory for the shell (or the command specified via	1125	Sets the working directory for the shell (or the command specified via
1165	B<-e>). The I<path> must be an absolute path and it must exist for	1126	B<-e>). The I<path> must be an absolute path and it must exist for
1166	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1127	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1167	directory will be used; option B<-cd>.	1128	directory will be used; option B<-cd>.
1168		1129
1169	=item B<keysym.>I<sym>: I<string>	1130	=item B<keysym.>I<sym>: I<action>
1170		1131
1171	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1132	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1172	intervening resource name B<keysym.> cannot be omitted.	1133	resource name B<keysym.> cannot be omitted.
1173		1134
1174	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1135	Using this resource, you can map key combinations such as
1175	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1136	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1176	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1137	string than would normally result from that combination, making the
1177	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1138	terminal scroll up or down the way you want it, or any other thing an
1178	B<2>, B<3>, B<4>, B<5>.	1139	extension might provide.
		1140
		1141	The key combination that triggers the action, I<sym>, has the following format:
		1142
		1143	(modifiers-)key
		1144
		1145	Where I<modifiers> can be any combination of the following full or
		1146	abbreviated modifier names:
		1147
		1148	=begin table
		1149
		1150	B<ISOLevel3> B<I>
		1151	B<AppKeypad> B<K>
		1152	B<Control> B<C>
		1153	B<NumLock> B<N>
		1154	B<Shift> B<S>
		1155	B<Meta> B<M> I<or> B<A>
		1156	B<Lock> B<L>
		1157	B<Mod1> B<1>
		1158	B<Mod2> B<2>
		1159	B<Mod3> B<3>
		1160	B<Mod4> B<4>
		1161	B<Mod5> B<5>
		1162
		1163	=end table
1179		1164
1180	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1165	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1181	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1166	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1182	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1167	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1183	current application keymap mode state.	1168	current application keymap mode state.
1184		1169
1185	The spellings of I<key> can be obtained by using B<xev>(1) command or	1170	Due the the large number of modifier combinations, a key mapping will
1186	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1171	match if I<at least> the specified identifiers are being set, and no other
		1172	key mappings with those and more bits are being defined. That means that
		1173	defining a mapping for C<a> will automatically provide definitions for
		1174	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1175	themselves. See the C<builtin:> action, below, for a way to work around
		1176	this when this is a problem.
		1177
		1178	The spelling of I<key> depends on your implementation of X. An easy way to
		1179	find a key name is to use the B<xev>(1) command. You can find a list by
		1180	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1187	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1181	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1188	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1182	value (B<0x0000 - 0xFFFF>).
1189	performed in an exact manner; however, the closest match is assured.
1190		1183
1191	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1184	As with any resource value, the I<action> string may contain backslash
		1185	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1192	number), see RESOURCES in C<man 7 X> for further details.	1186	number), see RESOURCES in C<man 7 X> for further details.
1193		1187
1194	You can define a range of keysyms in one shot by	1188	An action starts with an action prefix that selects a certain type
1195	loading the C<keysym-list> perl extension and providing a I<string>	1189	of action, followed by a colon. An action string without colons is
1196	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1190	interpreted as a literal string to pass to the tty (as if it was
		1191	prefixed with C<string:>).
		1192
		1193	The following action prefixes are known - extensions can provide
		1194	additional prefixes:
		1195
		1196	=over
		1197
		1198	=item string:STRING
		1199
		1200	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1201	then the remaining C<STRING> will be passed to the program running in the
		1202	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1203	string C<echo rm -rf /> followed by a newline:
		1204
		1205	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1206
		1207	This could in theory be used to completely redefine your keymap.
		1208
		1209	In addition, for actions of this type, you can define a range of
		1210	keysyms in one shot by loading the C<keysym-list> perl extension and
		1211	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1197	should be a character not used by the strings.	1212	the delimiter `/' should be a character not used by the strings.
1198		1213
1199	Its usage can be demonstrated by an example:	1214	Its usage can be demonstrated by an example:
1200		1215
1201	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>	1216	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1202		1217
1203	The above line is equivalent to the following three lines:	1218	The above line is equivalent to the following three lines:
1204		1219
1205	URxvt.keysym.Meta-Control-0x61: \033<a>	1220	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1206	URxvt.keysym.Meta-Control-0x62: \033<b>	1221	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1207	URxvt.keysym.Meta-Control-0x63: \033<c>	1222	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1208		1223
		1224	=item command:STRING
		1225
1209	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1226	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1210	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1227	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1228	the opposite of C<string:> - instead of sending it to the program running
		1229	in the terminal, it will be treated as if it were program output). This is
		1230	most useful to feed command sequences into @@RXVT_NAME@@.
		1231
1211	example the following means "change the current locale to C<zh_CN.GBK>	1232	For example the following means "change the current locale to C<zh_CN.GBK>
1212	when Control-Meta-c is being pressed":	1233	when Control-Meta-c is being pressed":
1213		1234
1214	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1235	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1215		1236
1216	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1237	The following example will map Control-Meta-1 and Control-Meta-2 to
1217	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1238	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1218	manpage. For example, the F<selection> extension (activated via	1239	font-switching at runtime:
1219	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1220		1240
1221	URxvt.keysym.M-C-c: perl:selection:rot13	1241	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1242	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1222		1243
1223	Due the the large number of modifier combinations, a defined key mapping	1244	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1224	will match if I<at least> the specified identifiers are being set, and	1245	info):
1225	no other key mappings with those and more bits are being defined. That
1226	means that defining a key map for C<a> will automatically provide
1227	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1228	mappings themselves.
1229		1246
1230	Unfortunately, this will override built-in key mappings. For example	1247	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1248	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1249
		1250	=item builtin:
		1251
		1252	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1253	key binding existed for the key combination. The obvious use is to undo
		1254	the effect of existing bindings. The not so obvious use is to reinstate
		1255	bindings when another binding overrides too many modifiers.
		1256
1231	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1257	For example if you overwrite the C<Insert> key you will disable
1232	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1258	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1233	user-defined keymap using the C<builtin:> replacement:	1259	"holes" into the user-defined keymap using the C<builtin:> replacement:
1234		1260
1235	URxvt.keysym.Insert: <my insert key sequence>	1261	URxvt.keysym.Insert: <my insert key sequence>
1236	URxvt.keysym.S-Insert: builtin:	1262	URxvt.keysym.S-Insert: builtin:
1237		1263
1238	The first line defines a mapping for C<Insert> and I<any> combination	1264	The first line defines a mapping for C<Insert> and I<any> combination
1239	of modifiers. The second line re-establishes the default mapping for	1265	of modifiers. The second line re-establishes the default mapping for
1240	C<Shift-Insert>.	1266	C<Shift-Insert>.
1241		1267
1242	The following example will map Control-Meta-1 and Control-Meta-2 to	1268	=item builtin-string:
1243	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1244	font-switching at runtime:
1245		1269
1246	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1270	This action is mainly useful to restore string mappings for keys that
1247	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1271	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1272	difficult to explain - basically, this action will send the string to the
		1273	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1274	action for it.
1248		1275
1249	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1276	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1250	info):	1277	selection when you press C<Shift-Insert>. With the following bindings, it
		1278	would instead emit the (undocumented, but what applications running in the
		1279	terminal might expect) sequence C<ESC [ 2 $> instead:
1251		1280
1252	URxvt.keysym.M-C-3: command:\033[8;25;80t	1281	URxvt.keysym.S-Insert: builtin-string:
1253	URxvt.keysym.M-C-4: command:\033[8;48;110t	1282	URxvt.keysym.C-S-Insert: builtin:
		1283
		1284	The first line disables the paste functionality for that key
		1285	combination, and the second reinstates the default behaviour for
		1286	C<Control-Shift-Insert>, which would otherwise be overridden.
		1287
		1288	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1289	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1290	this:
		1291
		1292	URxvt.keysym.C-M-c: builtin-string:
		1293	URxvt.keysym.C-M-v: builtin-string:
		1294
		1295	=item EXTENSION:STRING
		1296
		1297	An action of this form invokes the action B<STRING>, if any, provided
		1298	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1299	be loaded automatically if necessary.
		1300
		1301	Not all extensions define actions, but popular extensions that do
		1302	include the I<selection> and I<matcher> extensions (documented in their
		1303	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1304	respectively).
		1305
		1306	From the silly examples department, this will rot13-"encrypt"
		1307	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1308	keyboards:
		1309
		1310	URxvt.keysym.M-C-c: selection:rot13
		1311
		1312	=item perl:STRING DEPRECATED
		1313
		1314	This is a deprecated way of invoking commands provided by perl
		1315	extensions. It is still supported, but should not be used anymore.
		1316
		1317	=back
1254		1318
1255	=item B<perl-ext-common>: I<string>	1319	=item B<perl-ext-common>: I<string>
1256		1320
1257	=item B<perl-ext>: I<string>	1321	=item B<perl-ext>: I<string>
1258		1322
1259	Comma-separated list(s) of perl extension scripts (default: C<default>) to	1323	Comma-separated list(s) of perl extension scripts (default: C<default>) to
1260	use in this terminal instance; option B<-pe>.	1324	use in this terminal instance; option B<-pe>.
1261		1325
1262	Extension names can be prefixed with a C<-> sign to prohibit using	1326	Extension names can be prefixed with a C<-> sign to remove them again, in
1263	them. This can be useful to selectively disable some extensions loaded	1327	case they had been specified earlier. This can be useful to selectively
1264	by default, or specified via the C<perl-ext-common> resource. For	1328	disable some extensions loaded by default, or specified via the
1265	example, C<default,-selection> will use all the default extension except	1329	C<perl-ext-common> resource. For example, C<default,-selection> will use
1266	C<selection>.	1330	all the default extensions except C<selection>.
1267		1331
1268	Extension names can also be followed by an argument in angle brackets	1332	To prohibit autoloading of extensions, you can prefix them with C</>,
1269	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1333	which will make urxvt refuse to automatically load them (this can be
1270	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1334	overridden, however, by specifying the extension name again without a
1271	multiple times with different arguments will pass multiple arguments to	1335	prefix, though). This does not prohibit extensions themselves loading
1272	the extension.	1336	other extensions. For example, C<default,/background> will keep the
		1337	C<background> extension from being loaded when a background OSC sequence
		1338	is received.
		1339
		1340	The default set includes the C<selection>, C<option-popup>,
		1341	C<selection-popup>, C<readline>, C<searchable-scrollback> and
		1342	C<confirm-paste> extensions, as well as any extensions which are mentioned
		1343	in B<keysym> resources.
		1344
		1345	Any extension such that a corresponding resource is given on the
		1346	command line is automatically appended to B<perl-ext>.
1273		1347
1274	Each extension is looked up in the library directories, loaded if	1348	Each extension is looked up in the library directories, loaded if
1275	necessary, and bound to the current terminal instance.	1349	necessary, and bound to the current terminal instance. When the library
		1350	search path contains multiple extension files of the same name, then the
		1351	first one found will be used.
1276		1352
1277	If both of these resources are the empty string, then the perl	1353	If both of these resources are the empty string, then the perl interpreter
1278	interpreter will not be initialized. The idea behind two options is that	1354	will not be initialized. The rationale for having two options is that
1279	B<perl-ext-common> will be used for extensions that should be available to	1355	B<perl-ext-common> will be used for extensions that should be available to
1280	all instances, while B<perl-ext> is used for specific instances.	1356	all instances, while B<perl-ext> is used for specific instances.
1281		1357
1282	=item B<perl-eval>: I<string>	1358	=item B<perl-eval>: I<string>
1283		1359
…		…
1286		1362
1287	=item B<perl-lib>: I<path>	1363	=item B<perl-lib>: I<path>
1288		1364
1289	Colon-separated list of additional directories that hold extension	1365	Colon-separated list of additional directories that hold extension
1290	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look	1366	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1291	in these directories, then in C<$RXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and	1367	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1292	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1368	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1293		1369
1294	See the @@RXVT_NAME@@perl(3) manpage.	1370	See the @@RXVT_NAME@@perl(3) manpage.
1295		1371
1296	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1372	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
…		…
1301	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1377	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1302		1378
1303	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1379	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1304	for details.	1380	for details.
1305		1381
1306	=item B<searchable-scrollback:> I<keysym>	1382	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1307		1383
1308	Sets the hotkey that starts the incremental scrollback buffer search	1384	This resource is deprecated and will be removed. Use a B<keysym> resource
1309	(default: C<M-s>).	1385	instead, e.g.:
1310		1386
		1387	URxvt.keysym.M-s: searchable-scrollback:start
		1388
1311	=item B<urlLauncher>: I<string>	1389	=item B<url-launcher>: I<string>
1312		1390
1313	Specifies the program to be started with a URL argument. Used by the	1391	Specifies the program to be started with a URL argument. Used by the
1314	C<selection-popup> and C<matcher> perl extensions.	1392	C<selection-popup> and C<matcher> perl extensions.
1315		1393
1316	=item B<transient-for>: I<windowid>	1394	=item B<transient-for>: I<windowid>
…		…
1360	=head1 THE SELECTION: SELECTING AND PASTING TEXT	1438	=head1 THE SELECTION: SELECTING AND PASTING TEXT
1361		1439
1362	The behaviour of text selection and insertion/pasting mechanism is similar	1440	The behaviour of text selection and insertion/pasting mechanism is similar
1363	to I<xterm>(1).	1441	to I<xterm>(1).
1364		1442
1365	=over 4	1443	=over
1366		1444
1367	=item B<Selecting>:	1445	=item B<Selecting>:
1368		1446
1369	Left click at the beginning of the region, drag to the end of the region	1447	Left click at the beginning of the region, drag to the end of the region
1370	and release; Right click to extend the marked region; Left double-click	1448	and release; Right click to extend the marked region; Left double-click
…		…
1385	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1463	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1386		1464
1387	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1465	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1388	inserted too.	1466	inserted too.
1389		1467
		1468	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1469	B<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1470	binding causes the value of the internal selection to be copied to the
		1471	CLIPBOARD selection, while the second binding causes the value of the
		1472	CLIPBOARD selection to be inserted.
		1473
1390	=back	1474	=back
1391		1475
1392	=head1 CHANGING FONTS	1476	=head1 CHANGING FONTS
1393		1477
1394	Changing fonts (or font sizes, respectively) via the keypad is not yet	1478	Changing fonts (or font sizes, respectively) via the keypad is not yet
…		…
1411	and character codes using the keyboard. It consists of 4 parts. The	1495	and character codes using the keyboard. It consists of 4 parts. The
1412	first part is available if rxvt-unicode has been compiled with	1496	first part is available if rxvt-unicode has been compiled with
1413	C<--enable-frills>, the rest is available when rxvt-unicode was compiled	1497	C<--enable-frills>, the rest is available when rxvt-unicode was compiled
1414	with C<--enable-iso14755>.	1498	with C<--enable-iso14755>.
1415		1499
1416	=over 4	1500	=over
1417		1501
1418	=item * 5.1: Basic method	1502	=item * 5.1: Basic method
1419		1503
1420	This allows you to enter unicode characters using their hexcode.	1504	This allows you to enter unicode characters using their hexcode.
1421		1505
…		…
1482	In addition to the default foreground and background colours,	1566	In addition to the default foreground and background colours,
1483	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus	1567	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1484	high-intensity (potentially bold/blink) versions of the same, and 72 (or	1568	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1485	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB	1569	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1486	cube plus a 8 (24) colour greyscale ramp.	1570	cube plus a 8 (24) colour greyscale ramp.
		1571
		1572	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1573	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1574	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1575	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1576	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1577	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1578	use many similar 24-bit colours. It's typically not a problem in common
		1579	scenarios.
1487		1580
1488	Here is a list of the ANSI colours with their names.	1581	Here is a list of the ANSI colours with their names.
1489		1582
1490	=begin table	1583	=begin table
1491		1584
…		…
1518	The following text gives values for the standard 88 colour mode (and	1611	The following text gives values for the standard 88 colour mode (and
1519	values for the 256 colour mode in parentheses).	1612	values for the 256 colour mode in parentheses).
1520		1613
1521	The RGB cube uses indices 16..79 (16..231) using the following formulas:	1614	The RGB cube uses indices 16..79 (16..231) using the following formulas:
1522		1615
1523	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3	1616	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1524	index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15	1617	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1525		1618
1526	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%	1619	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1527	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of	1620	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1528	the RGB cube.	1621	the RGB cube.
1529		1622
…		…
1592		1685
1593	=head1 ENVIRONMENT	1686	=head1 ENVIRONMENT
1594		1687
1595	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1688	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1596		1689
1597	=over 4	1690	=over
1598		1691
1599	=item B<TERM>	1692	=item B<TERM>
1600		1693
1601	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via	1694	Normally set to C<rxvt-unicode>, unless overwritten at configure time, via
1602	resources or on the command line.	1695	resources or on the command line.
…		…
1644	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1737	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1645	@@RXVT_NAME@@d(1).	1738	@@RXVT_NAME@@d(1).
1646		1739
1647	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.	1740	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1648		1741
1649	=item B<RXVT_PERL_LIB> [I<sic>]	1742	=item B<URXVT_PERL_LIB>
1650		1743
1651	Additional F<:>-separated library search path for perl extensions. Will be	1744	Additional F<:>-separated library search path for perl extensions. Will be
1652	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library	1745	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1653	directory.	1746	directory.
1654		1747
		1748	=item B<URXVT_PERL_VERBOSITY>
		1749
		1750	See L<@@RXVT_NAME@@perl>(3).
		1751
1655	=item B<HOME>	1752	=item B<HOME>
1656		1753
1657	Used to locate the default directory for the unix domain socket for	1754	Used to locate the default directory for the unix domain socket for
1658	daemon communications and to locate various resource files (such as	1755	daemon communications and to locate various resource files (such as
1659	C<.Xdefaults>)	1756	C<.Xdefaults>)
…		…
1669		1766
1670	=back	1767	=back
1671		1768
1672	=head1 FILES	1769	=head1 FILES
1673		1770
1674	=over 4	1771	=over
1675		1772
1676	=item B</usr/lib/X11/rgb.txt>	1773	=item B</usr/lib/X11/rgb.txt>
1677		1774
1678	Colour names.	1775	Colour names.
1679		1776
1680	=back	1777	=back
1681		1778
1682	=head1 SEE ALSO	1779	=head1 SEE ALSO
1683		1780
		1781	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1684	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1782	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1685		1783
1686	=head1 CURRENT PROJECT COORDINATOR	1784	=head1 CURRENT PROJECT COORDINATOR
1687		1785
1688	=over 4	1786	=over
1689		1787
1690	=item Project Coordinator	1788	=item Project Coordinator
1691		1789
1692	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1790	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1693		1791
1694	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1792	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1695		1793
1696	=back	1794	=back
1697		1795
1698	=head1 AUTHORS	1796	=head1 AUTHORS
1699		1797
1700	=over 4	1798	=over
1701		1799
1702	=item John Bovey	1800	=item John Bovey
1703		1801
1704	University of Kent, 1992, wrote the original Xvt.	1802	University of Kent, 1992, wrote the original Xvt.
1705		1803
1706	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1804	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1707		1805
1708	very heavily modified Xvt and came up with Rxvt	1806	very heavily modified Xvt and came up with Rxvt
1709		1807
1710	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1808	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1711		1809
1712	wrote the Greek Keyboard Input (no longer in code)	1810	wrote the Greek Keyboard Input (no longer in code)
1713		1811
1714	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1812	=item mj olesen <olesen@me.QueensU.CA>
1715		1813
1716	Wrote the menu system.	1814	Wrote the menu system.
1717		1815
1718	Project Coordinator (changes.txt 2.11 to 2.21)	1816	Project Coordinator (changes.txt 2.11 to 2.21)
1719		1817
1720	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1818	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1721		1819
1722	Project Coordinator (changes.txt 2.21a to 2.4.5)	1820	Project Coordinator (changes.txt 2.21a to 2.4.5)
1723		1821
1724	=item Geoff Wing L<< <gcw@pobox.com> >>	1822	=item Geoff Wing <gcw@pobox.com>
1725		1823
1726	Rewrote screen display and text selection routines.	1824	Rewrote screen display and text selection routines.
1727		1825
1728	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1826	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1729		1827
1730	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1828	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1731		1829
1732	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1830	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1733	extension, random hacks, numerous bugfixes and extensions.	1831	extension, random hacks, numerous bugfixes and extensions.
1734		1832
1735	Project Coordinator (Changes 1.0 -)	1833	Project Coordinator (Changes 1.0 -)
1736		1834
1737	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1835	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1738		1836
1739	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.	1837	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1740		1838
1741	=back	1839	=back
1742		1840

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.217 by root, Tue Jun 5 21:51:23 2012 UTC vs. Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.217 by root, Tue Jun 5 21:51:23 2012 UTC vs.
Revision 1.263 by sf-exg, Sat Jan 20 08:00:50 2024 UTC