[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.83 by root, Tue Jan 3 22:28:07 2006 UTC vs.
Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC

…		…
172	resource B<borderColor>.	172	resource B<borderColor>.
173		173
174	=item B<-fn> I<fontlist>	174	=item B<-fn> I<fontlist>
175		175
176	Select the fonts to be used. This is a comma separated list of font names	176	Select the fonts to be used. This is a comma separated list of font names
177	that are used in turn when trying to display Unicode characters. The	177	that are checked in order when trying to find glyphs for characters. The
178	first font defines the cell size for characters; other fonts might be	178	first font defines the cell size for characters; other fonts might be
179	smaller, but not (in general) larger. A (hopefully) reasonable default	179	smaller, but not (in general) larger. A (hopefully) reasonable default
180	font list is always appended to it. See resource B<font> for more details.	180	font list is always appended to it. See resource B<font> for more details.
181		181
182	In short, to specify an X11 core font, just specify it's name or prefix it	182	In short, to specify an X11 core font, just specify it's name or prefix it
…		…
189	See also the question "How does rxvt-unicode choose fonts?" in the FAQ	189	See also the question "How does rxvt-unicode choose fonts?" in the FAQ
190	section of @@RXVT_NAME@@(7).	190	section of @@RXVT_NAME@@(7).
191		191
192	=item B<-fb> I<fontlist>	192	=item B<-fb> I<fontlist>
193		193
194	Compile font-styles: The bold font list to use when B<bold> characters are to	194	Compile I<font-styles>: The bold font list to use when B<bold> characters
195	be printed. See resource B<boldFont> for details.	195	are to be printed. See resource B<boldFont> for details.
196		196
197	=item B<-fi> I<fontlist>	197	=item B<-fi> I<fontlist>
198		198
199	Compile font-styles: The italic font list to use when I<italic> characters are to	199	Compile I<font-styles>: The italic font list to use when I<italic>
200	be printed. See resource B<italicFont> for details.	200	characters are to be printed. See resource B<italicFont> for details.
201		201
202	=item B<-fbi> I<fontlist>	202	=item B<-fbi> I<fontlist>
203		203
204	Compile font-styles: The bold italic font list to use when B<< I<bold	204	Compile I<font-styles>: The bold italic font list to use when B<< I<bold
205	italic> >> characters are to be printed. See resource B<boldItalicFont>	205	italic> >> characters are to be printed. See resource B<boldItalicFont>
206	for details.	206	for details.
207		207
208	=item B<-is>\|B<+is>	208	=item B<-is>\|B<+is>
209		209
210	Compile font-styles: Bold/Italic font styles imply high intensity	210	Compile I<font-styles>: Bold/Italic font styles imply high intensity
211	foreground/background (default). See resource B<intensityStyles> for	211	foreground/background (default). See resource B<intensityStyles> for
212	details.	212	details.
213		213
214	=item B<-name> I<name>	214	=item B<-name> I<name>
215		215
…		…
296	=item B<-bl>	296	=item B<-bl>
297		297
298	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	298	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
299	if honoured by the WM, the rxvt-unicode window will not have window	299	if honoured by the WM, the rxvt-unicode window will not have window
300	decorations; resource B<borderLess>.	300	decorations; resource B<borderLess>.
		301
		302	=item B<-override-redirect>
		303
		304	Compile I<frills>: Sets override-redirect on the window; resource
		305	B<override-redirect>.
		306
		307	=item B<-sbg>
		308
		309	Compile I<frills>: Disable the usage of the built-in block graphics/line
		310	drawing characters and just rely on what the specified fonts provide. Use
		311	this if you have a good font and want to use its block graphic glyphs;
		312	resource B<skipBuiltinGlyphs>.
301		313
302	=item B<-lsp> I<number>	314	=item B<-lsp> I<number>
303		315
304	Compile I<frills>: Lines (pixel height) to insert between each row of	316	Compile I<frills>: Lines (pixel height) to insert between each row of
305	the display. Useful to work around font rendering problems; resource	317	the display. Useful to work around font rendering problems; resource
…		…
428	$rxvt->signal_connect_after (realize => sub {	440	$rxvt->signal_connect_after (realize => sub {
429	my $xid = $_[0]->window->get_xid;	441	my $xid = $_[0]->window->get_xid;
430	system "@@RXVT_NAME@@ -embed $xid &";	442	system "@@RXVT_NAME@@ -embed $xid &";
431	});	443	});
432		444
433	=item B<-pty-fd> I<fileno>	445	=item B<-pty-fd> I<file descriptor>
434		446
435	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty	447	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty
436	pair but instead use the given filehandle as the tty master. This is	448	pair but instead use the given filehandle as the tty master. This is
437	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator	449	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator
438	without having to run a program within it.	450	without having to run a program within it.
439		451
440	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	452	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
441	entries and will not tinker with pty/tty permissions - you have to do that	453	entries and will not tinker with pty/tty permissions - you have to do that
442	yourself if you want that.	454	yourself if you want that.
443		455
		456	As an extremely special case, specifying C<-1> will completely suppress
		457	pty/tty operations.
		458
444	Here is a example in perl that illustrates how this option can be used (a	459	Here is a example in perl that illustrates how this option can be used (a
445	longer example is in F<doc/pty-fd>):	460	longer example is in F<doc/pty-fd>):
446		461
447	use IO::Pty;	462	use IO::Pty;
448	use Fcntl;	463	use Fcntl;
…		…
456	my $slave = $pty->slave;	471	my $slave = $pty->slave;
457	while (<$slave>) { print $slave "got <$_>\n" }	472	while (<$slave>) { print $slave "got <$_>\n" }
458		473
459	=item B<-pe> I<string>	474	=item B<-pe> I<string>
460		475
461	Colon-separated list of perl extension scripts to use in this terminal instance. See resource B<perl-ext>.	476	Comma-separated list of perl extension scripts to use (or not to use) in
		477	this terminal instance. See resource B<perl-ext> for details.
462		478
463	=back	479	=back
464		480
465	=head1 RESOURCES (available also as long-options)	481	=head1 RESOURCES (available also as long-options)
466		482
467	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	483	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
468	options) compiled into your version.	484	options) compiled into your version.
469		485
470	There are two different methods that @@RXVT_NAME@@ can use to get the	486	You can set and change the resources using X11 tools like B<xrdb>. Many
471	Xresource data: using the X libraries (Xrm*-functions) or internal	487	distribution do also load settings from the B<~/.Xresources> file when X
472	Xresources reader (B<~/.Xdefaults>). For the first method (ie.	488	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
473	B<@@RXVT_NAME@@ -h> lists B<XGetDefaults>), you can set and change the	489	with later settings overwriting earlier ones:
474	resources using X11 tools like B<xrdb>. Many distribution do also load
475	settings from the B<~/.Xresources> file when X starts. @@RXVT_NAME@@
476	will consult the following files/resources in order, with later settings
477	overwriting earlier ones:
478		490
479	1. system-wide app-defaults file, either locale-dependent OR global	491	1. system-wide app-defaults file, either locale-dependent OR global
480	2. app-defaults file in $XAPPLRESDIR	492	2. app-defaults file in $XAPPLRESDIR
481	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	493	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults
482	4. SCREEN_RESOURCES for the current screen	494	4. SCREEN_RESOURCES for the current screen
483	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	495	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
484		496
485	If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h>
486	lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults
487	set in XAPPLOADDIR/URxvt (compile-time defined: usually
488	B</usr/lib/X11/app-defaults/URxvt>) and resources set in
489	B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist.
490	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two	497	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
491	class names: B<XTerm> and B<URxvt>. The class name B<Rxvt> allows	498	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
492	resources common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be	499	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
493	easily configured, while the class name B<URxvt> allows resources	500	configured, while the class name B<URxvt> allows resources unique to
494	unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be	501	B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@>
495	shared between different B<@@RXVT_NAME@@> configurations. If no	502	configurations. If no resources are specified, suitable defaults will
496	resources are specified, suitable defaults will be used. Command-line	503	be used. Command-line arguments can be used to override resource
497	arguments can be used to override resource settings. The following	504	settings. The following resources are supported (you might want to
498	resources are allowed:	505	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
		506	extensions not documented here):
499		507
500	=over 4	508	=over 4
501		509
502	=item B<geometry:> I<geom>	510	=item B<geometry:> I<geom>
503		511
…		…
624	of 1 displays the image without any scaling. A scale of 2 to 9	632	of 1 displays the image without any scaling. A scale of 2 to 9
625	specifies an integer number of images in that direction. No image will	633	specifies an integer number of images in that direction. No image will
626	be magnified beyond 10 times its original size. The maximum permitted	634	be magnified beyond 10 times its original size. The maximum permitted
627	scale is 1000. [default 0x0+50+50]	635	scale is 1000. [default 0x0+50+50]
628		636
629	=item B<menu:> I<file[;tag]>
630
631	Read in the specified menu file (note the `.menu' extension is
632	optional) and also optionally specify a starting tag to find. See the
633	reference documentation for details on the syntax for the menuBar.
634
635	=item B<path:> I<path>	637	=item B<path:> I<path>
636		638
637	Specify the colon-delimited search path for finding files (XPM and	639	Specify the colon-delimited search path for finding XPM files.
638	menus), in addition to the paths specified by the B<RXVTPATH> and
639	B<PATH> environment variables.
640		640
641	=item B<font:> I<fontlist>	641	=item B<font:> I<fontlist>
642		642
643	Select the fonts to be used. This is a comma separated list of font	643	Select the fonts to be used. This is a comma separated list of font names
644	names that are used in turn when trying to display Unicode characters.	644	that are checked in order when trying to find glyphs for characters. The
645	The first font defines the cell size for characters; other fonts might	645	first font defines the cell size for characters; other fonts might be
646	be smaller, but not larger. A reasonable default font list is always	646	smaller, but not (in general) larger. A (hopefully) reasonable default
647	appended to it; option B<-fn>.	647	font list is always appended to it; option B<-fn>.
648		648
649	Each font can either be a standard X11 core font (XLFD) name, with	649	Each font can either be a standard X11 core font (XLFD) name, with
650	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.	650	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.
651		651
652	In addition, each font can be prefixed with additional hints and	652	In addition, each font can be prefixed with additional hints and
…		…
654	hint currently is C<codeset=codeset-name>, and this is only used for Xft	654	hint currently is C<codeset=codeset-name>, and this is only used for Xft
655	fonts.	655	fonts.
656		656
657	For example, this font resource	657	For example, this font resource
658		658
659	URxvt*font: 9x15bold,\	659	URxvt.font: 9x15bold,\
660	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\	660	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
661	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \	661	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
662	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \	662	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \
663	xft:Code2000:antialias=false	663	xft:Code2000:antialias=false
664		664
…		…
761		761
762	The string will be interpreted as if typed into the shell as-is.	762	The string will be interpreted as if typed into the shell as-is.
763		763
764	Example:	764	Example:
765		765
766	URxvt*print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	766	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
767		767
768	This creates a new file in your home directory with the screen contents	768	This creates a new file in your home directory with the screen contents
769	everytime you hit C<Print>.	769	everytime you hit C<Print>.
770		770
771	=item B<scrollBar:> I<boolean>	771	=item B<scrollBar:> I<boolean>
…		…
825	=item B<borderLess:> I<boolean>	825	=item B<borderLess:> I<boolean>
826		826
827	Set MWM hints to request a borderless window, i.e. if honoured by the	827	Set MWM hints to request a borderless window, i.e. if honoured by the
828	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.	828	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.
829		829
		830	=item B<skipBuiltinGlyphs:> I<boolean>
		831
		832	Compile I<frills>: Disable the usage of the built-in block graphics/line
		833	drawing characters and just rely on what the specified fonts provide. Use
		834	this if you have a good font and want to use its block graphic glyphs;
		835	option B<-sbg>.
		836
830	=item B<termName:> I<termname>	837	=item B<termName:> I<termname>
831		838
832	Specifies the terminal type name to be set in the B<TERM> environment	839	Specifies the terminal type name to be set in the B<TERM> environment
833	variable; option B<-tn>.	840	variable; option B<-tn>.
834		841
…		…
889	pressed. If unset it will send the sequence traditionally associated	896	pressed. If unset it will send the sequence traditionally associated
890	with the B<Execute> key.	897	with the B<Execute> key.
891		898
892	=item B<cutchars:> I<string>	899	=item B<cutchars:> I<string>
893		900
894	The characters used as delimiters for double-click word selection. The	901	The characters used as delimiters for double-click word selection.
895	built-in default:	902
		903	When the selection extension is in use (the default if compiled in, see
		904	the @@RXVT_NAME@@perl(3) manpage), a suitable regex using these characters
		905	will be created (if the resource exists, otherwise, no regex will be
		906	created). In this mode, characters outside ISO-8859-1 can be used.
		907
		908	When the selection extension is not used, only ISO-8859-1 characters can
		909	be used. If not specified, the built-in default is used:
896		910
897	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	911	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>
898		912
899	=item B<preeditType:> I<style>	913	=item B<preeditType:> I<style>
900		914
…		…
936	default. (Note that many other terminals, including xterm, have these	950	default. (Note that many other terminals, including xterm, have these
937	sequences enabled by default, which doesn't make it safer, though).	951	sequences enabled by default, which doesn't make it safer, though).
938		952
939	You can enable them by setting this boolean resource or specifying	953	You can enable them by setting this boolean resource or specifying
940	B<-insecure> as an option. At the moment, this enables display-answer,	954	B<-insecure> as an option. At the moment, this enables display-answer,
941	locale, findfont, icon label and window title requests as well as dynamic	955	locale, findfont, icon label and window title requests.
942	menubar dispatch.
943		956
944	=item B<modifier:> I<modifier>	957	=item B<modifier:> I<modifier>
945		958
946	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,	959	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,
947	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option	960	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option
…		…
951		964
952	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)	965	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)
953	character is passed through. It may contain escape values as described	966	character is passed through. It may contain escape values as described
954	in the entry on B<keysym> following.	967	in the entry on B<keysym> following.
955		968
956	=item B<secondaryScreen:> I<bool>	969	=item B<secondaryScreen:> I<boolean>
957		970
958	Turn on/off secondary screen (default enabled).	971	Turn on/off secondary screen (default enabled).
959		972
960	=item B<secondaryScroll:> I<bool>	973	=item B<secondaryScroll:> I<boolean>
961		974
962	Turn on/off secondary screen scroll (default enabled). If the this	975	Turn on/off secondary screen scroll (default enabled). If the this
963	option is enabled, scrolls on the secondary screen will change the	976	option is enabled, scrolls on the secondary screen will change the
964	scrollback buffer and switching to/from the secondary screen will	977	scrollback buffer and switching to/from the secondary screen will
965	instead scroll the screen up.	978	instead scroll the screen up.
966		979
967	=item B<hold>: I<bool>	980	=item B<hold>: I<boolean>
968		981
969	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	982	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
970	will not immediately destroy its window when the program executed within	983	will not immediately destroy its window when the program executed within
971	it exits. Instead, it will wait till it is being killed or closed by the	984	it exits. Instead, it will wait till it is being killed or closed by the
972	user.	985	user.
…		…
997	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,	1010	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,
998	C<\000>: octal number) or verbatim control characters (C<^?>: delete,	1011	C<\000>: octal number) or verbatim control characters (C<^?>: delete,
999	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it	1012	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it
1000	can start or end with whitespace.	1013	can start or end with whitespace.
1001		1014
1002	Please note that you need to double the C<\> when using	1015	Please note that you need to double the C<\> in resource files, as
1003	C<--enable-xgetdefault>, as X itself does it's own de-escaping (you can	1016	Xlib itself does it's own de-escaping (you can use C<\033> instead of
1004	use C<\033> instead of C<\e> (and so on), which will work with both Xt and	1017	C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own
1005	@@RXVT_NAME@@'s own processing).	1018	processing).
1006		1019
1007	You can define a range of keysyms in one shot by providing a I<string>	1020	You can define a range of keysyms in one shot by providing a I<string>
1008	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'	1021	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'
1009	should be a character not used by the strings.	1022	should be a character not used by the strings.
1010		1023
…		…
1062	info):	1075	info):
1063		1076
1064	URxvt.keysym.M-C-3: command:\033[8;25;80t	1077	URxvt.keysym.M-C-3: command:\033[8;25;80t
1065	URxvt.keysym.M-C-4: command:\033[8;48;110t	1078	URxvt.keysym.M-C-4: command:\033[8;48;110t
1066		1079
		1080	=item B<perl-ext-common>: I<string>
		1081
1067	=item B<perl-ext>: I<string>	1082	=item B<perl-ext>: I<string>
1068		1083
1069	Colon-separated list of perl extension scripts to use in this terminal	1084	Comma-separated list(s) of perl extension scripts (default: C<default>) to
		1085	use in this terminal instance; option B<-pe>.
		1086
		1087	Extension names can be prefixed with a C<-> sign to prohibit using
		1088	them. This can be useful to selectively disable some extensions loaded
		1089	by default, or specified via the C<perl-ext-common> resource. For
		1090	example, C<default,-selection> will use all the default extension except
		1091	C<selection>.
		1092
		1093	Extension names can also be followed by an argument in angle brackets
		1094	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for
		1095	searchable scorllback to Alt/Meta-s). Mentioning the same extension
		1096	multiple times with different arguments will pass multiple arguments to
		1097	the extension.
		1098
1070	instance. Each extension is looked up in the library directories, loaded	1099	Each extension is looked up in the library directories, loaded if
1071	if necessary, and bound to the current terminal instance. If this resource	1100	necessary, and bound to the current terminal instance.
1072	is empty or missing, then the perl interpreter will not be initialized;	1101
1073	option B<-pe>.	1102	If both of these resources are the empty string, then the perl
		1103	interpreter will not be initialized. The idea behind two options is that
		1104	B<perl-ext-common> will be used for extensions that should be available to
		1105	all instances, while B<perl-ext> is used for specific instances.
1074		1106
1075	=item B<perl-eval>: I<string>	1107	=item B<perl-eval>: I<string>
1076		1108
1077	Perl code to be evaluated when all extensions have been registered. See the	1109	Perl code to be evaluated when all extensions have been registered. See
1078	@@RXVT_NAME@@perl(3) manpage.	1110	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource
		1111	will be ignored when running setuid/setgid.
1079		1112
1080	=item B<perl-lib>: I<path>	1113	=item B<perl-lib>: I<path>
1081		1114
1082	Colon-separated list of additional directories that hold extension	1115	Colon-separated list of additional directories that hold extension
1083	scripts. When looking for extensions specified by the C<perl> resource,	1116	scripts. When looking for extensions specified by the C<perl> resource,
1084	@@RXVT_NAME@@ will first look in these directories and then in	1117	@@RXVT_NAME@@ will first look in these directories and then in
1085	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1118	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource
		1119	will be ignored when running setuid/setgid.
1086		1120
1087	See the @@RXVT_NAME@@perl(3) manpage.	1121	See the @@RXVT_NAME@@perl(3) manpage.
		1122
		1123	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
		1124
		1125	Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for
		1126	details.
		1127
		1128	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
		1129
		1130	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
		1131	for details.
		1132
		1133	=item B<searchable-scrollback:> I<keysym>
		1134
		1135	Sets the hotkey that starts the incremental scrollback buffer search
		1136	(default: C<M-s>).
		1137
		1138	=item B<urlLauncher>: I<string>
		1139
		1140	Specifies the program to be started with a URL argument. Used by the
		1141	C<selection-popup> and C<mark-urls> perl extensions.
		1142
		1143	=item B<transient-for>: I<windowid>
		1144
		1145	Compile I<frills>: Sets the WM_TRANSIENT_FOR property to the given window id.
		1146
		1147	=item B<override-redirect>: I<boolean>
		1148
		1149	Compile I<frills>: Sets override-redirect for the terminal window, making
		1150	it almost invisible to window managers; option B<-override-redirect>.
1088		1151
1089	=back	1152	=back
1090		1153
1091	=head1 THE SCROLLBAR	1154	=head1 THE SCROLLBAR
1092		1155
…		…
1134	selection, and trailing whitespace is visually underlined and removed from	1197	selection, and trailing whitespace is visually underlined and removed from
1135	the selection.	1198	the selection.
1136		1199
1137	=item B<Insertion>:	1200	=item B<Insertion>:
1138		1201
1139	Pressing and releasing the Middle mouse button (or B<Shift-Insert>) in	1202	Pressing and releasing the Middle mouse button in an B<@@RXVT_NAME@@>
1140	an B<@@RXVT_NAME@@> window causes the current text selection to be	1203	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1141	inserted as if it had been typed on the keyboard.	1204	Meta modifier) to be inserted as if it had been typed on the keyboard.
		1205
		1206	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
		1207	inserted too.
1142		1208
1143	=back	1209	=back
1144		1210
1145	=head1 CHANGING FONTS	1211	=head1 CHANGING FONTS
1146		1212
1147	Changing fonts (or font sizes, respectively) via the keypad is not yet	1213	Changing fonts (or font sizes, respectively) via the keypad is not yet
1148	supported in rxvt-unicode. Bug me if you need this.	1214	supported in rxvt-unicode. Bug me if you need this.
1149		1215
1150	You can, however, switch fonts at runtime using escape sequences (and	1216	You can, however, switch fonts at runtime using escape sequences, e.g.:
1151	therefore using the menubar), e.g.:
1152		1217
1153	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"	1218	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"
		1219
		1220	You can use keyboard shortcuts, too:
		1221
		1222	URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		1223	URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
1154		1224
1155	rxvt-unicode will automatically re-apply these fonts to the output so far.	1225	rxvt-unicode will automatically re-apply these fonts to the output so far.
1156		1226
1157	=head1 ISO 14755 SUPPORT	1227	=head1 ISO 14755 SUPPORT
1158		1228
…		…
1320		1390
1321	=item B<SHELL>	1391	=item B<SHELL>
1322		1392
1323	The shell to be used for command execution, defaults to C</bin/sh>.	1393	The shell to be used for command execution, defaults to C</bin/sh>.
1324		1394
1325	=item B<RXVTPATH>
1326
1327	The path where @@RXVT_NAME@@ looks for support files such as menu and xpm
1328	files.
1329
1330	=item B<PATH>
1331
1332	Used in the same way as C<RXVTPATH>.
1333
1334	=item B<RXVT_SOCKET>	1395	=item B<RXVT_SOCKET>
1335		1396
1336	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1397	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1337	@@RXVT_NAME@@d(1).	1398	@@RXVT_NAME@@d(1).
1338		1399
…		…
1407		1468
1408	Project Coordinator (changes.txt 2.21a to 2.4.5)	1469	Project Coordinator (changes.txt 2.21a to 2.4.5)
1409		1470
1410	=item Geoff Wing L<< <gcw@pobox.com> >>	1471	=item Geoff Wing L<< <gcw@pobox.com> >>
1411		1472
1412	Rewrote screen display and text selection routines. Project Coordinator	1473	Rewrote screen display and text selection routines.
		1474
1413	(changes.txt 2.4.6 - rxvt-unicode)	1475	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1414		1476
1415	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1477	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>
1416		1478
1417	Forked rxvt-unicode, rewrote most of the display code and internal	1479	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1418	character handling to store text in unicode, improve xterm	1480	extension, random hacks, numerous bugfixes and extensions.
1419	compatibility and apply numerous other bugfixes and extensions.
1420		1481
1421	Project Coordinator (Changes 1.0 -)	1482	Project Coordinator (Changes 1.0 -)
1422		1483
		1484	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>
		1485
		1486	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.
		1487
1423	=back	1488	=back
1424		1489

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.83 by root, Tue Jan 3 22:28:07 2006 UTC vs. Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.83 by root, Tue Jan 3 22:28:07 2006 UTC vs.
Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC