[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.53 by root, Fri Feb 11 18:14:07 2005 UTC vs.
Revision 1.111 by root, Tue Jan 31 00:25:16 2006 UTC

…		…
93		93
94	Attempt to open a window on the named X display (B<-d> still	94	Attempt to open a window on the named X display (B<-d> still
95	respected). In the absence of this option, the display specified by the	95	respected). In the absence of this option, the display specified by the
96	B<DISPLAY> environment variable is used.	96	B<DISPLAY> environment variable is used.
97		97
		98	=item B<-depth> I<bitdepth>
		99
		100	Compile I<xft>: Attempt to find a visual with the given bit depth;
		101	resource B<depth>.
		102
98	=item B<-geometry> I<geom>	103	=item B<-geometry> I<geom>
99		104
100	Window geometry (B<-g> still respected); resource B<geometry>.	105	Window geometry (B<-g> still respected); resource B<geometry>.
101		106
102	=item B<-rv>\|B<+rv>	107	=item B<-rv>\|B<+rv>
…		…
105		110
106	=item B<-j>\|B<+j>	111	=item B<-j>\|B<+j>
107		112
108	Turn on/off jump scrolling; resource B<jumpScroll>.	113	Turn on/off jump scrolling; resource B<jumpScroll>.
109		114
110	=item B<-ip>\|B<+ip>	115	=item B<-ip>\|B<+ip> \| B<-tr>\|B<+tr>
111		116
112	Turn on/off inheriting parent window's pixmap. Alternative form is	117	Turn on/off inheriting parent window's pixmap. Alternative form is
113	B<-tr>; resource B<inheritPixmap>.	118	B<-tr>; resource B<inheritPixmap>.
114		119
		120	I<Please note that transparency of any kind if completely unsupported by
		121	the author. Don't bug him with installation questions!>
		122
115	=item B<-fade> I<number>	123	=item B<-fade> I<number>
116		124
117	Fade the text by the given percentage when focus is lost. resource B<fading>.	125	Fade the text by the given percentage when focus is lost. Small values
		126	fade a little only, 100 completely replaces all colours by the fade
		127	colour; resource B<fading>.
		128
		129	=item B<-fadecolor> I<colour>
		130
		131	Fade to this colour when fading is used (see B<-fade>). The default colour
		132	is opaque black. resource B<fadeColor>.
118		133
119	=item B<-tint> I<colour>	134	=item B<-tint> I<colour>
120		135
121	Tint the transparent background pixmap with the given colour when	136	Tint the transparent background pixmap with the given colour when
122	transparency is enabled with B<-tr> or B<-ip>. See also the B<-sh>	137	transparency is enabled with B<-tr> or B<-ip>. This only works for
123	option that can be used to brighten or darken the image in addition to	138	non-tiled backgrounds, currently. See also the B<-sh> option that can be
124	tinting it.	139	used to brighten or darken the image in addition to tinting it; resource
		140	I<tintColor>. Example:
		141
		142	@@RXVT_NAME@@ -tr -tint blue -sh 40
125		143
126	=item B<-sh>	144	=item B<-sh>
127		145
128	I<number> Darken (0 .. 100) or lighten (-1 .. -100) the transparent	146	I<number> Darken (0 .. 100) or lighten (-1 .. -100) the transparent
129	background image in addition to tinting it (i.e. B<-tint> must be	147	background image in addition to tinting it (i.e. B<-tint> must be
…		…
162	resource B<borderColor>.	180	resource B<borderColor>.
163		181
164	=item B<-fn> I<fontlist>	182	=item B<-fn> I<fontlist>
165		183
166	Select the fonts to be used. This is a comma separated list of font names	184	Select the fonts to be used. This is a comma separated list of font names
167	that are used in turn when trying to display Unicode characters. The	185	that are checked in order when trying to find glyphs for characters. The
168	first font defines the cell size for characters; other fonts might be	186	first font defines the cell size for characters; other fonts might be
169	smaller, but not (in general) larger. A (hopefully) reasonable default	187	smaller, but not (in general) larger. A (hopefully) reasonable default
170	font list is always appended to it. See resource B<font> for more details.	188	font list is always appended to it. See resource B<font> for more details.
171		189
172	In short, to specify an X11 core font, just specify it's name or prefix it	190	In short, to specify an X11 core font, just specify it's name or prefix it
…		…
179	See also the question "How does rxvt-unicode choose fonts?" in the FAQ	197	See also the question "How does rxvt-unicode choose fonts?" in the FAQ
180	section of @@RXVT_NAME@@(7).	198	section of @@RXVT_NAME@@(7).
181		199
182	=item B<-fb> I<fontlist>	200	=item B<-fb> I<fontlist>
183		201
184	Compile font-styles: The bold font list to use when bold characters are to	202	Compile I<font-styles>: The bold font list to use when B<bold> characters
185	be printed. See resource B<boldFont> for details.	203	are to be printed. See resource B<boldFont> for details.
186		204
187	=item B<-fi> I<fontlist>	205	=item B<-fi> I<fontlist>
188		206
189	Compile font-styles: The italic font list to use when bold characters are to	207	Compile I<font-styles>: The italic font list to use when I<italic>
190	be printed. See resource B<italicFont> for details.	208	characters are to be printed. See resource B<italicFont> for details.
191		209
192	=item B<-fbi> I<fontlist>	210	=item B<-fbi> I<fontlist>
193		211
194	Compile font-styles: The bold italic font list to use when bold characters are to	212	Compile I<font-styles>: The bold italic font list to use when B<< I<bold
195	be printed. See resource B<boldItalicFont> for details.	213	italic> >> characters are to be printed. See resource B<boldItalicFont>
		214	for details.
		215
		216	=item B<-is>\|B<+is>
		217
		218	Compile I<font-styles>: Bold/Italic font styles imply high intensity
		219	foreground/background (default). See resource B<intensityStyles> for
		220	details.
196		221
197	=item B<-name> I<name>	222	=item B<-name> I<name>
198		223
199	Specify the application name under which resources are to be obtained,	224	Specify the application name under which resources are to be obtained,
200	rather than the default executable file name. Name should not contain	225	rather than the default executable file name. Name should not contain
…		…
238		263
239	Put scrollbar on right/left; resource B<scrollBar_right>.	264	Put scrollbar on right/left; resource B<scrollBar_right>.
240		265
241	=item B<-st>\|B<+st>	266	=item B<-st>\|B<+st>
242		267
243	Display normal (non XTerm/NeXT) scrollbar without/with a trough;	268	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
244	resource B<scrollBar_floating>.	269	resource B<scrollBar_floating>.
245		270
246	=item B<-ptab>\|B<+ptab>	271	=item B<-ptab>\|B<+ptab>
247		272
248	If enabled (default), "Horizontal Tab" characters are being stored as	273	If enabled (default), "Horizontal Tab" characters are being stored as
…		…
279	=item B<-bl>	304	=item B<-bl>
280		305
281	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	306	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
282	if honoured by the WM, the rxvt-unicode window will not have window	307	if honoured by the WM, the rxvt-unicode window will not have window
283	decorations; resource B<borderLess>.	308	decorations; resource B<borderLess>.
		309
		310	=item B<-override-redirect>
		311
		312	Compile I<frills>: Sets override-redirect on the window; resource
		313	B<override-redirect>.
		314
		315	=item B<-sbg>
		316
		317	Compile I<frills>: Disable the usage of the built-in block graphics/line
		318	drawing characters and just rely on what the specified fonts provide. Use
		319	this if you have a good font and want to use its block graphic glyphs;
		320	resource B<skipBuiltinGlyphs>.
284		321
285	=item B<-lsp> I<number>	322	=item B<-lsp> I<number>
286		323
287	Compile I<frills>: Lines (pixel height) to insert between each row of	324	Compile I<frills>: Lines (pixel height) to insert between each row of
288	the display. Useful to work around font rendering problems; resource	325	the display. Useful to work around font rendering problems; resource
…		…
303	given on the command line. If this option is used, it must be the last	340	given on the command line. If this option is used, it must be the last
304	on the command-line. If there is no B<-e> option then the default is to	341	on the command-line. If there is no B<-e> option then the default is to
305	run the program specified by the B<SHELL> environment variable or,	342	run the program specified by the B<SHELL> environment variable or,
306	failing that, I<sh(1)>.	343	failing that, I<sh(1)>.
307		344
		345	Please note that you must specify a program with arguments. If you want to
		346	run shell commands, you have to specify the shell, like this:
		347
		348	@@RXVT_NAME@@ -e sh -c "shell commands"
		349
308	=item B<-title> I<text>	350	=item B<-title> I<text>
309		351
310	Window title (B<-T> still respected); the default title is the basename	352	Window title (B<-T> still respected); the default title is the basename
311	of the program specified after the B<-e> option, if any, otherwise the	353	of the program specified after the B<-e> option, if any, otherwise the
312	application name; resource B<title>.	354	application name; resource B<title>.
…		…
368	=item B<-ssr>\|B<+ssr>	410	=item B<-ssr>\|B<+ssr>
369		411
370	Turn on/off secondary screen scroll (default enabled); resource	412	Turn on/off secondary screen scroll (default enabled); resource
371	B<secondaryScroll>.	413	B<secondaryScroll>.
372		414
		415	=item B<-hold>\|B<+hold>
		416
		417	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
		418	will not immediately destroy its window when the program executed within
		419	it exits. Instead, it will wait till it is being killed or closed by the
		420	user; resource B<hold>.
		421
373	=item B<-keysym.>I<sym>: I<string>	422	=item B<-keysym.>I<sym> I<string>
374		423
375	Remap a key symbol. See resource B<keysym>.	424	Remap a key symbol. See resource B<keysym>.
376		425
		426	=item B<-embed> I<windowid>
		427
		428	Tells @@RXVT_NAME@@ to embed it's windows into an already-existing window,
		429	which enables applications to easily embed a terminal.
		430
		431	Right now, @@RXVT_NAME@@ will first unmap/map the specified window, so it
		432	shouldn't be a top-level window. @@RXVT_NAME@@ will also reconfigure it
		433	quite a bit, so don't expect it to keep some specific state. It's best to
		434	create an extra subwindow for @@RXVT_NAME@@ and leave it alone.
		435
		436	The window will not be destroyed when @@RXVT_NAME@@ exits.
		437
		438	It might be useful to know that @@RXVT_NAME@@ will not close file
		439	descriptors passed to it (except for stdin/out/err, of course), so you
		440	can use file descriptors to communicate with the programs within the
		441	terminal. This works regardless of wether the C<-embed> option was used or
		442	not.
		443
		444	Here is a short Gtk2-perl snippet that illustrates how this option can be
		445	used (a longer example is in F<doc/embed>):
		446
		447	my $rxvt = new Gtk2::Socket;
		448	$rxvt->signal_connect_after (realize => sub {
		449	my $xid = $_[0]->window->get_xid;
		450	system "@@RXVT_NAME@@ -embed $xid &";
		451	});
		452
		453	=item B<-pty-fd> I<file descriptor>
		454
		455	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty
		456	pair but instead use the given filehandle as the tty master. This is
		457	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator
		458	without having to run a program within it.
		459
		460	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
		461	entries and will not tinker with pty/tty permissions - you have to do that
		462	yourself if you want that.
		463
		464	As an extremely special case, specifying C<-1> will completely suppress
		465	pty/tty operations.
		466
		467	Here is a example in perl that illustrates how this option can be used (a
		468	longer example is in F<doc/pty-fd>):
		469
		470	use IO::Pty;
		471	use Fcntl;
		472
		473	my $pty = new IO::Pty;
		474	fcntl $pty, F_SETFD, 0; # clear close-on-exec
		475	system "@@RXVT_NAME@@ -pty-fd " . (fileno $pty) . "&";
		476	close $pty;
		477
		478	# now communicate with rxvt
		479	my $slave = $pty->slave;
		480	while (<$slave>) { print $slave "got <$_>\n" }
		481
377	=item B<-xrm> I<resourcestring>	482	=item B<-pe> I<string>
378		483
379	No effect on rxvt-unicode. Simply passes through an argument to be made	484	Comma-separated list of perl extension scripts to use (or not to use) in
380	available in the instance's argument list. Appears in I<WM_COMMAND> in	485	this terminal instance. See resource B<perl-ext> for details.
381	some window managers.
382		486
383	=back	487	=back
384		488
385	=head1 RESOURCES (available also as long-options)	489	=head1 RESOURCES (available also as long-options)
386		490
387	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	491	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
388	options) compiled into your version.	492	options) compiled into your version.
389		493
390	There are two different methods that @@RXVT_NAME@@ can use to get the	494	You can set and change the resources using X11 tools like B<xrdb>. Many
391	Xresource data: using the X libraries (Xrm*-functions) or internal	495	distribution do also load settings from the B<~/.Xresources> file when X
392	Xresources reader (B<~/.Xdefaults>). For the first method (ie.	496	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
393	B<@@RXVT_NAME@@ -h> lists B<XGetDefaults>), you can set and change the	497	with later settings overwriting earlier ones:
394	resources using X11 tools like B<xrdb>. Many distribution do also load
395	settings from the B<~/.Xresources> file when X starts. @@RXVT_NAME@@
396	will consult the following files/resources in order, with later settings
397	overwriting earlier ones:
398		498
399	1. system-wide app-defaults file, either locale-dependent OR global	499	1. system-wide app-defaults file, either locale-dependent OR global
400	2. app-defaults file in $XAPPLRESDIR	500	2. app-defaults file in $XAPPLRESDIR
401	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	501	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults
402	4. SCREEN_RESOURCES for the current screen	502	4. SCREEN_RESOURCES for the current screen
403	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	503	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
404		504
405	If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h>
406	lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults
407	set in XAPPLOADDIR/URxvt (compile-time defined: usually
408	B</usr/lib/X11/app-defaults/URxvt>) and resources set in
409	B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist.
410	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two	505	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
411	class names: B<XTerm> and B<URxvt>. The class name B<Rxvt> allows	506	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
412	resources common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be	507	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
413	easily configured, while the class name B<URxvt> allows resources	508	configured, while the class name B<URxvt> allows resources unique to
414	unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be	509	B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@>
415	shared between different B<@@RXVT_NAME@@> configurations. If no	510	configurations. If no resources are specified, suitable defaults will
416	resources are specified, suitable defaults will be used. Command-line	511	be used. Command-line arguments can be used to override resource
417	arguments can be used to override resource settings. The following	512	settings. The following resources are supported (you might want to
418	resources are allowed:	513	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
		514	extensions not documented here):
419		515
420	=over 4	516	=over 4
		517
		518	=item B<depth:> I<bitdepth>
		519
		520	Compile I<xft>: Attempt to find a visual with the given bit depth;
		521	option B<-depth>.
421		522
422	=item B<geometry:> I<geom>	523	=item B<geometry:> I<geom>
423		524
424	Create the window with the specified X window geometry [default 80x24];	525	Create the window with the specified X window geometry [default 80x24];
425	option B<-geometry>.	526	option B<-geometry>.
…		…
499		600
500	B<True>: make the background inherit the parent windows' pixmap, giving	601	B<True>: make the background inherit the parent windows' pixmap, giving
501	artificial transparency. B<False>: do not inherit the parent windows'	602	artificial transparency. B<False>: do not inherit the parent windows'
502	pixmap.	603	pixmap.
503		604
		605	I<Please note that transparency of any kind if completely unsupported by
		606	the author. Don't bug him with installation questions!>
		607
504	=item B<fading:> I<number>	608	=item B<fading:> I<number>
505		609
506	Fade the text by the given percentage when focus is lost.	610	Fade the text by the given percentage when focus is lost; option B<-fade>.
		611
		612	=item B<fadeColor:> I<colour>
		613
		614	Fade to this colour, when fading is used (see B<fading:>). The default
		615	colour is black; option B<-fadecolor>.
507		616
508	=item B<tintColor:> I<colour>	617	=item B<tintColor:> I<colour>
509		618
510	Tint the transparent background pixmap with the given colour.	619	Tint the transparent background pixmap with the given colour; option
		620	B<-tint>.
511		621
512	=item B<shading:> I<number>	622	=item B<shading:> I<number>
513		623
514	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background	624	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background
515	image in addition to tinting it.	625	image in addition to tinting it.
…		…
519	Use the specified colour for the scrollbar [default #B2B2B2].	629	Use the specified colour for the scrollbar [default #B2B2B2].
520		630
521	=item B<troughColor:> I<colour>	631	=item B<troughColor:> I<colour>
522		632
523	Use the specified colour for the scrollbar's trough area [default	633	Use the specified colour for the scrollbar's trough area [default
524	#969696]. Only relevant for normal (non XTerm/NeXT) scrollbar.	634	#969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar.
525		635
526	=item B<borderColor:> I<colour>	636	=item B<borderColor:> I<colour>
527		637
528	The colour of the border around the text area and between the scrollbar	638	The colour of the border around the text area and between the scrollbar
529	and the text.	639	and the text.
…		…
538	of 1 displays the image without any scaling. A scale of 2 to 9	648	of 1 displays the image without any scaling. A scale of 2 to 9
539	specifies an integer number of images in that direction. No image will	649	specifies an integer number of images in that direction. No image will
540	be magnified beyond 10 times its original size. The maximum permitted	650	be magnified beyond 10 times its original size. The maximum permitted
541	scale is 1000. [default 0x0+50+50]	651	scale is 1000. [default 0x0+50+50]
542		652
543	=item B<menu:> I<file[;tag]>
544
545	Read in the specified menu file (note the `.menu' extension is
546	optional) and also optionally specify a starting tag to find. See the
547	reference documentation for details on the syntax for the menuBar.
548
549	=item B<path:> I<path>	653	=item B<path:> I<path>
550		654
551	Specify the colon-delimited search path for finding files (XPM and	655	Specify the colon-delimited search path for finding XPM files.
552	menus), in addition to the paths specified by the B<RXVTPATH> and
553	B<PATH> environment variables.
554		656
555	=item B<font:> I<fontlist>	657	=item B<font:> I<fontlist>
556		658
557	Select the fonts to be used. This is a comma separated list of font	659	Select the fonts to be used. This is a comma separated list of font names
558	names that are used in turn when trying to display Unicode characters.	660	that are checked in order when trying to find glyphs for characters. The
559	The first font defines the cell size for characters; other fonts might	661	first font defines the cell size for characters; other fonts might be
560	be smaller, but not larger. A reasonable default font list is always	662	smaller, but not (in general) larger. A (hopefully) reasonable default
561	appended to it. option B<-fn>.	663	font list is always appended to it; option B<-fn>.
562		664
563	Each font can either be a standard X11 core font (XLFD) name, with	665	Each font can either be a standard X11 core font (XLFD) name, with
564	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.	666	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.
565		667
566	In addition, each font can be prefixed with additional hints and	668	In addition, each font can be prefixed with additional hints and
…		…
568	hint currently is C<codeset=codeset-name>, and this is only used for Xft	670	hint currently is C<codeset=codeset-name>, and this is only used for Xft
569	fonts.	671	fonts.
570		672
571	For example, this font resource	673	For example, this font resource
572		674
573	URxvt*font: 9x15bold,\	675	URxvt.font: 9x15bold,\
574	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\	676	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
575	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \	677	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
576	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \	678	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \
577	xft:Code2000:antialias=false	679	xft:Code2000:antialias=false
578		680
…		…
612	not possible, replacement fonts of the desired shape will be tried.	714	not possible, replacement fonts of the desired shape will be tried.
613		715
614	If set, but empty, then this specific style is disabled and the normal	716	If set, but empty, then this specific style is disabled and the normal
615	text font will being used for the given style.	717	text font will being used for the given style.
616		718
		719	=item B<intensityStyles:> I<boolean>
		720
		721	When font styles are not enabled, or this option is enabled (B<True>,
		722	option B<-is>, the default), bold and italic font styles imply high
		723	intensity foreground/backround colours. Disabling this option (B<False>,
		724	option B<+is>) disables this behaviour, the high intensity colours are not
		725	reachable.
		726
617	=item B<selectstyle:> I<mode>	727	=item B<selectstyle:> I<mode>
618		728
619	Set mouse selection style to B<old> which is 2.20, B<oldword> which is	729	Set mouse selection style to B<old> which is 2.20, B<oldword> which is
620	xterm style with 2.20 old word selection, or anything else which gives	730	xterm style with 2.20 old word selection, or anything else which gives
621	xterm style selection.	731	xterm style selection.
622		732
623	=item B<scrollstyle:> I<mode>	733	=item B<scrollstyle:> I<mode>
624		734
625	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	735	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
626	the author's favourite..	736	the author's favourite.
627		737
628	=item B<title:> I<string>	738	=item B<title:> I<string>
629		739
630	Set window title string, the default title is the command-line	740	Set window title string, the default title is the command-line
631	specified after the B<-e> option, if any, otherwise the application	741	specified after the B<-e> option, if any, otherwise the application
…		…
663		773
664	Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use	774	Specify a command pipe for vt100 printer [default I<lpr(1)>]. Use
665	B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or	775	B<Print> to initiate a screen dump to the printer and B<Ctrl-Print> or
666	B<Shift-Print> to include the scrollback as well.	776	B<Shift-Print> to include the scrollback as well.
667		777
		778	The string will be interpreted as if typed into the shell as-is.
		779
		780	Example:
		781
		782	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
		783
		784	This creates a new file in your home directory with the screen contents
		785	everytime you hit C<Print>.
		786
668	=item B<scrollBar:> I<boolean>	787	=item B<scrollBar:> I<boolean>
669		788
670	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	789	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
671	disable the scrollbar; option B<+sb>.	790	disable the scrollbar; option B<+sb>.
672		791
…		…
692	B<+si>.	811	B<+si>.
693		812
694	=item B<scrollWithBuffer:> I<boolean>	813	=item B<scrollWithBuffer:> I<boolean>
695		814
696	B<True>: scroll with scrollback buffer when tty receives new lines (and	815	B<True>: scroll with scrollback buffer when tty receives new lines (and
697	B<scrollTtyOutput> is False); option B<+sw>. B<False>: do not scroll	816	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll
698	with scrollback buffer when tty recieves new lines; option B<-sw>.	817	with scrollback buffer when tty recieves new lines; option B<+sw>.
699		818
700	=item B<scrollTtyKeypress:> I<boolean>	819	=item B<scrollTtyKeypress:> I<boolean>
701		820
702	B<True>: scroll to bottom when a non-special key is pressed. Special keys	821	B<True>: scroll to bottom when a non-special key is pressed. Special keys
703	are those which are intercepted by rxvt-unicode for special handling and	822	are those which are intercepted by rxvt-unicode for special handling and
…		…
722	=item B<borderLess:> I<boolean>	841	=item B<borderLess:> I<boolean>
723		842
724	Set MWM hints to request a borderless window, i.e. if honoured by the	843	Set MWM hints to request a borderless window, i.e. if honoured by the
725	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.	844	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.
726		845
		846	=item B<skipBuiltinGlyphs:> I<boolean>
		847
		848	Compile I<frills>: Disable the usage of the built-in block graphics/line
		849	drawing characters and just rely on what the specified fonts provide. Use
		850	this if you have a good font and want to use its block graphic glyphs;
		851	option B<-sbg>.
		852
727	=item B<termName:> I<termname>	853	=item B<termName:> I<termname>
728		854
729	Specifies the terminal type name to be set in the B<TERM> environment	855	Specifies the terminal type name to be set in the B<TERM> environment
730	variable; option B<-tn>.	856	variable; option B<-tn>.
731		857
…		…
768		894
769	Mouse pointer background colour.	895	Mouse pointer background colour.
770		896
771	=item B<pointerBlankDelay:> I<number>	897	=item B<pointerBlankDelay:> I<number>
772		898
773	Specifies number of seconds before blanking the pointer [default 2].	899	Specifies number of seconds before blanking the pointer [default 2]. Use a
		900	large number (e.g. C<987654321>) to effectively disable the timeout.
774		901
775	=item B<backspacekey:> I<string>	902	=item B<backspacekey:> I<string>
776		903
777	The string to send when the backspace key is pressed. If set to B<DEC>	904	The string to send when the backspace key is pressed. If set to B<DEC>
778	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	905	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>
…		…
785	pressed. If unset it will send the sequence traditionally associated	912	pressed. If unset it will send the sequence traditionally associated
786	with the B<Execute> key.	913	with the B<Execute> key.
787		914
788	=item B<cutchars:> I<string>	915	=item B<cutchars:> I<string>
789		916
790	The characters used as delimiters for double-click word selection. The	917	The characters used as delimiters for double-click word selection
791	built-in default:	918	(whitespace delimiting is added automatically if resource is given).
		919
		920	When the selection extension is in use (the default if compiled in, see
		921	the @@RXVT_NAME@@perl(3) manpage), a suitable regex using these characters
		922	will be created (if the resource exists, otherwise, no regex will be
		923	created). In this mode, characters outside ISO-8859-1 can be used.
		924
		925	When the selection extension is not used, only ISO-8859-1 characters can
		926	be used. If not specified, the built-in default is used:
792		927
793	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	928	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>
794		929
795	=item B<preeditType:> I<style>	930	=item B<preeditType:> I<style>
796		931
…		…
803	=item B<imLocale:> I<name>	938	=item B<imLocale:> I<name>
804		939
805	The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g.	940	The locale to use for opening the IM. You can use an C<LC_CTYPE> of e.g.
806	C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the	941	C<de_DE.UTF-8> for normal text processing but C<ja_JP.EUC-JP> for the
807	input extension to be able to input japanese characters while staying in	942	input extension to be able to input japanese characters while staying in
808	another locale. option B<-imlocale>.	943	another locale; option B<-imlocale>.
809		944
810	=item B<imFont:> I<fontset>	945	=item B<imFont:> I<fontset>
811		946
812	Specify the font-set used for XIM styles C<OverTheSpot> or	947	Specify the font-set used for XIM styles C<OverTheSpot> or
813	C<OffTheSpot>. It must be a standard X font set (XLFD patterns separated	948	C<OffTheSpot>. It must be a standard X font set (XLFD patterns separated
…		…
818		953
819	=item B<tripleclickwords:> I<boolean>	954	=item B<tripleclickwords:> I<boolean>
820		955
821	Change the meaning of triple-click selection with the left mouse	956	Change the meaning of triple-click selection with the left mouse
822	button. Instead of selecting a full line it will extend the selection to	957	button. Instead of selecting a full line it will extend the selection to
823	the end of the logical line only. option B<-tcw>.	958	the end of the logical line only; option B<-tcw>.
824		959
825	=item B<insecure:> I<boolean>	960	=item B<insecure:> I<boolean>
826		961
827	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that	962	Enables "insecure" mode. Rxvt-unicode offers some escape sequences that
828	echo arbitrary strings like the icon name or the locale. This could be	963	echo arbitrary strings like the icon name or the locale. This could be
829	abused if somebody gets 8-bit-clean access to your display, whether	964	abused if somebody gets 8-bit-clean access to your display, whether
830	throuh a mail client displaying mail bodies unfiltered or though	965	through a mail client displaying mail bodies unfiltered or through
831	write(1). Therefore, these sequences are disabled by default. (Note	966	write(1) or any other means. Therefore, these sequences are disabled by
832	that other terminals, including xterm, have these sequences	967	default. (Note that many other terminals, including xterm, have these
833	enabled by default). You can enable them by setting this boolean	968	sequences enabled by default, which doesn't make it safer, though).
834	resource or specifying B<-insecure> as an option. At the moment, this	969
835	enabled display-answer, locale, findfont, icon label and window title	970	You can enable them by setting this boolean resource or specifying
836	requests as well as dynamic menubar dispatch.	971	B<-insecure> as an option. At the moment, this enables display-answer,
		972	locale, findfont, icon label and window title requests.
837		973
838	=item B<modifier:> I<modifier>	974	=item B<modifier:> I<modifier>
839		975
840	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,	976	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,
841	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option	977	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option
…		…
845		981
846	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)	982	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)
847	character is passed through. It may contain escape values as described	983	character is passed through. It may contain escape values as described
848	in the entry on B<keysym> following.	984	in the entry on B<keysym> following.
849		985
850	=item B<secondaryScreen:> I<bool>	986	=item B<secondaryScreen:> I<boolean>
851		987
852	Turn on/off secondary screen (default enabled).	988	Turn on/off secondary screen (default enabled).
853		989
854	=item B<secondaryScroll:> I<bool>	990	=item B<secondaryScroll:> I<boolean>
855		991
856	Turn on/off secondary screen scroll (default enabled). If the this	992	Turn on/off secondary screen scroll (default enabled). If the this
857	option is enabled, scrolls on the secondary screen will change the	993	option is enabled, scrolls on the secondary screen will change the
858	scrollback buffer and switching to/from the secondary screen will	994	scrollback buffer and switching to/from the secondary screen will
859	instead scroll the screen up.	995	instead scroll the screen up.
		996
		997	=item B<hold>: I<boolean>
		998
		999	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
		1000	will not immediately destroy its window when the program executed within
		1001	it exits. Instead, it will wait till it is being killed or closed by the
		1002	user.
860		1003
861	=item B<keysym.>I<sym>: I<string>	1004	=item B<keysym.>I<sym>: I<string>
862		1005
863	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1006	Compile I<frills>: Associate I<string> with keysym I<sym>. The
864	intervening resource name B<keysym.> cannot be omitted.	1007	intervening resource name B<keysym.> cannot be omitted.
…		…
884	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,	1027	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,
885	C<\000>: octal number) or verbatim control characters (C<^?>: delete,	1028	C<\000>: octal number) or verbatim control characters (C<^?>: delete,
886	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it	1029	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it
887	can start or end with whitespace.	1030	can start or end with whitespace.
888		1031
889	Please note that you need to double the C<\> when using	1032	Please note that you need to double the C<\> in resource files, as
890	C<--enable-xgetdefault>, as X itself does it's own de-escaping (you can	1033	Xlib itself does it's own de-escaping (you can use C<\033> instead of
891	use C<\033> instead of C<\e> (and so on), which will work with both Xt and	1034	C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own
892	@@RXVT_NAME@@'s own processing).	1035	processing).
893		1036
894	You can define a range of keysyms in one shot by providing a I<string>	1037	You can define a range of keysyms in one shot by providing a I<string>
895	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'	1038	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'
896	should be a character not used by the strings.	1039	should be a character not used by the strings.
897		1040
…		…
910	example the following means "change the current locale to C<zh_CN.GBK>	1053	example the following means "change the current locale to C<zh_CN.GBK>
911	when Control-Meta-c is being pressed":	1054	when Control-Meta-c is being pressed":
912		1055
913	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1056	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
914		1057
		1058	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>
		1059	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)
		1060	manpage. For example, the F<selection> extension (activated via
		1061	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
		1062
		1063	URxvt.keysym.M-C-c: perl:selection:rot13
		1064
		1065	Due the the large number of modifier combinations, a defined key mapping
		1066	will match if at I<at least> the specified identifiers are being set, and
		1067	no other key mappings with those and more bits are being defined. That
		1068	means that defining a key map for C<a> will automatically provide
		1069	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
		1070	mappings themselves.
		1071
		1072	Unfortunately, this will override built-in key mappings. For example
		1073	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s
		1074	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the
		1075	user-defined keymap using the C<builtin:> replacement:
		1076
		1077	URxvt.keysym.Insert: <my insert key sequence>
		1078	URxvt.keysym.S-Insert: builtin:
		1079
		1080	The first line defines a mapping for C<Insert> and I<any> combination
		1081	of modifiers. The second line re-establishes the default mapping for
		1082	C<Shift-Insert>.
		1083
915	The following example will map Control-Meta-1 and Control-Meta-2 to	1084	The following example will map Control-Meta-1 and Control-Meta-2 to
916	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited	1085	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
917	font-switching at runtime:	1086	font-switching at runtime:
918		1087
919	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1088	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
…		…
922	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1091	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
923	info):	1092	info):
924		1093
925	URxvt.keysym.M-C-3: command:\033[8;25;80t	1094	URxvt.keysym.M-C-3: command:\033[8;25;80t
926	URxvt.keysym.M-C-4: command:\033[8;48;110t	1095	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1096
		1097	=item B<perl-ext-common>: I<string>
		1098
		1099	=item B<perl-ext>: I<string>
		1100
		1101	Comma-separated list(s) of perl extension scripts (default: C<default>) to
		1102	use in this terminal instance; option B<-pe>.
		1103
		1104	Extension names can be prefixed with a C<-> sign to prohibit using
		1105	them. This can be useful to selectively disable some extensions loaded
		1106	by default, or specified via the C<perl-ext-common> resource. For
		1107	example, C<default,-selection> will use all the default extension except
		1108	C<selection>.
		1109
		1110	Extension names can also be followed by an argument in angle brackets
		1111	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for
		1112	searchable scorllback to Alt/Meta-s). Mentioning the same extension
		1113	multiple times with different arguments will pass multiple arguments to
		1114	the extension.
		1115
		1116	Each extension is looked up in the library directories, loaded if
		1117	necessary, and bound to the current terminal instance.
		1118
		1119	If both of these resources are the empty string, then the perl
		1120	interpreter will not be initialized. The idea behind two options is that
		1121	B<perl-ext-common> will be used for extensions that should be available to
		1122	all instances, while B<perl-ext> is used for specific instances.
		1123
		1124	=item B<perl-eval>: I<string>
		1125
		1126	Perl code to be evaluated when all extensions have been registered. See
		1127	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource
		1128	will be ignored when running setuid/setgid.
		1129
		1130	=item B<perl-lib>: I<path>
		1131
		1132	Colon-separated list of additional directories that hold extension
		1133	scripts. When looking for extensions specified by the C<perl> resource,
		1134	@@RXVT_NAME@@ will first look in these directories and then in
		1135	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource
		1136	will be ignored when running setuid/setgid.
		1137
		1138	See the @@RXVT_NAME@@perl(3) manpage.
		1139
		1140	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
		1141
		1142	Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for
		1143	details.
		1144
		1145	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
		1146
		1147	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
		1148	for details.
		1149
		1150	=item B<searchable-scrollback:> I<keysym>
		1151
		1152	Sets the hotkey that starts the incremental scrollback buffer search
		1153	(default: C<M-s>).
		1154
		1155	=item B<urlLauncher>: I<string>
		1156
		1157	Specifies the program to be started with a URL argument. Used by the
		1158	C<selection-popup> and C<mark-urls> perl extensions.
		1159
		1160	=item B<transient-for>: I<windowid>
		1161
		1162	Compile I<frills>: Sets the WM_TRANSIENT_FOR property to the given window id.
		1163
		1164	=item B<override-redirect>: I<boolean>
		1165
		1166	Compile I<frills>: Sets override-redirect for the terminal window, making
		1167	it almost invisible to window managers; option B<-override-redirect>.
927		1168
928	=back	1169	=back
929		1170
930	=head1 THE SCROLLBAR	1171	=head1 THE SCROLLBAR
931		1172
…		…
966	to select a word; Left triple-click to select the entire logical line	1207	to select a word; Left triple-click to select the entire logical line
967	(which can span multiple screen lines), unless modified by resource	1208	(which can span multiple screen lines), unless modified by resource
968	B<tripleclickwords>.	1209	B<tripleclickwords>.
969		1210
970	Starting a selection while pressing the B<Meta> key (or B<Meta+Ctrl> keys)	1211	Starting a selection while pressing the B<Meta> key (or B<Meta+Ctrl> keys)
971	(Compile: I<frills>) will create a rectangular selection instead of a normal	1212	(Compile: I<frills>) will create a rectangular selection instead of a
972	one.	1213	normal one. In this mode, every selected row becomes its own line in the
		1214	selection, and trailing whitespace is visually underlined and removed from
		1215	the selection.
973		1216
974	=item B<Insertion>:	1217	=item B<Insertion>:
975		1218
976	Pressing and releasing the Middle mouse button (or B<Shift-Insert>) in	1219	Pressing and releasing the Middle mouse button in an B<@@RXVT_NAME@@>
977	an B<@@RXVT_NAME@@> window causes the current text selection to be	1220	window causes the value of the PRIMARY selection (or CLIPBOARD with the
978	inserted as if it had been typed on the keyboard.	1221	Meta modifier) to be inserted as if it had been typed on the keyboard.
		1222
		1223	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
		1224	inserted too.
979		1225
980	=back	1226	=back
981		1227
982	=head1 CHANGING FONTS	1228	=head1 CHANGING FONTS
983		1229
984	Changing fonts (or font sizes, respectively) via the keypad is not yet	1230	Changing fonts (or font sizes, respectively) via the keypad is not yet
985	supported in rxvt-unicode. Bug me if you need this.	1231	supported in rxvt-unicode. Bug me if you need this.
986		1232
987	You can, however, switch fonts at runtime using escape sequences (and	1233	You can, however, switch fonts at runtime using escape sequences, e.g.:
988	therefore using the menubar), e.g.:
989		1234
990	printf '\e]701;%s\007' "9x15bold,xft:Kochi Gothic"	1235	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"
		1236
		1237	You can use keyboard shortcuts, too:
		1238
		1239	URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		1240	URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
991		1241
992	rxvt-unicode will automatically re-apply these fonts to the output so far.	1242	rxvt-unicode will automatically re-apply these fonts to the output so far.
993		1243
994	=head1 ISO 14755 SUPPORT	1244	=head1 ISO 14755 SUPPORT
995		1245
…		…
1066	=head1 COLORS AND GRAPHICS	1316	=head1 COLORS AND GRAPHICS
1067		1317
1068	In addition to the default foreground and background colours,	1318	In addition to the default foreground and background colours,
1069	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1319	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus
1070	high-intensity bold/blink versions of the same). Here is a list of the	1320	high-intensity bold/blink versions of the same). Here is a list of the
1071	colours with their B<rgb.txt> names.	1321	colours with their names.
1072		1322
1073	=begin table	1323	=begin table
1074		1324
1075	B<color0> (black) = Black	1325	B<color0> (black) = Black
1076	B<color1> (red) = Red3	1326	B<color1> (red) = Red3
…		…
1110	would yield White on Black, while on I<xterm>(1) it would yield Black	1360	would yield White on Black, while on I<xterm>(1) it would yield Black
1111	on White.	1361	on White.
1112		1362
1113	=back	1363	=back
1114		1364
		1365	=head2 ALPHA CHANNEL SUPPORT
		1366
		1367	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
		1368	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>
		1369	(recommended, but B<MUST> have 4 digits/component) colour specifications,
		1370	in addition to the ones provided by X, where the additional A component
		1371	specifies opacity (alpha) values. The minimum value of C<0> is completely
		1372	transparent). You can also prefix any color with C<[a]>, where C<a> is on
		1373	to four hex digits specifiying the opacity value.
		1374
		1375	You probably need to specify B<"-depth 32">, too, and have the luck that
		1376	your X-server uses ARGB pixel layout, as X is far from just supporting
		1377	ARGB visuals out of the box, and rxvt-unicode just fudges around.
		1378
		1379	For example, the following selects an almost completely transparent red
		1380	background, and an almost opaque pink foreground:
		1381
		1382	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/2222 -fg "[e]pink"
		1383
		1384	I<Please note that transparency of any kind if completely unsupported by
		1385	the author. Don't bug him with installation questions!>
		1386
1115	=head1 ENVIRONMENT	1387	=head1 ENVIRONMENT
1116		1388
1117	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1389	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1118		1390
1119	=over 4	1391	=over 4
…		…
1134	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is	1406	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
1135	the colour code used as default foreground/text colour (or the string	1407	the colour code used as default foreground/text colour (or the string
1136	C<default> to indicate that the default-colour escape sequence is to be	1408	C<default> to indicate that the default-colour escape sequence is to be
1137	used), C<bg> is the colour code used as default background colour (or the	1409	used), C<bg> is the colour code used as default background colour (or the
1138	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@	1410	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
1139	was compiled with XPM support. Libraries like C<slang> can (and do) use	1411	was compiled with XPM support. Libraries like C<ncurses> and C<slang> can
1140	this information to optimize screen output.	1412	(and do) use this information to optimize screen output.
1141		1413
1142	=item B<WINDOWID>	1414	=item B<WINDOWID>
1143		1415
1144	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel	1416	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
1145	window, which usually has subwindows for the scrollbar, the terminal	1417	window, which usually has subwindows for the scrollbar, the terminal
…		…
1157		1429
1158	=item B<SHELL>	1430	=item B<SHELL>
1159		1431
1160	The shell to be used for command execution, defaults to C</bin/sh>.	1432	The shell to be used for command execution, defaults to C</bin/sh>.
1161		1433
1162	=item B<RXVTPATH>
1163
1164	The path where @@RXVT_NAME@@ looks for support files such as menu and xpm
1165	files.
1166
1167	=item B<PATH>
1168
1169	Used in the same way as C<RXVTPATH>.
1170
1171	=item B<RXVT_SOCKET>	1434	=item B<RXVT_SOCKET>
1172		1435
1173	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1436	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1174	@@RXVT_NAME@@d(1).	1437	@@RXVT_NAME@@d(1).
1175		1438
1176	Default C<< $HOME/.rxvt-unicode-<nodename >>.	1439	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.
1177		1440
1178	=item B<HOME>	1441	=item B<HOME>
1179		1442
1180	Used to locate the default directory for the unix domain socket for	1443	Used to locate the default directory for the unix domain socket for
1181	daemon communications and to locate various resource files (such as	1444	daemon communications and to locate various resource files (such as
…		…
1202		1465
1203	=back	1466	=back
1204		1467
1205	=head1 SEE ALSO	1468	=head1 SEE ALSO
1206		1469
1207	@@RXVT_NAME@@(7), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1470	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1208
1209	=head1 BUGS
1210
1211	Check the BUGS file for an up-to-date list.
1212
1213	Cursor change support is not yet implemented.
1214
1215	Click-and-drag doesn't work with X11 mouse report overriding.
1216		1471
1217	=head1 CURRENT PROJECT COORDINATOR	1472	=head1 CURRENT PROJECT COORDINATOR
1218		1473
1219	=over 4	1474	=over 4
1220		1475
1221	=item Project Coordinator	1476	=item Project Coordinator
1222		1477
1223	@@RXVT_MAINT@@ L<@@RXVT_MAINTEMAIL@@>	1478	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>
1224		1479
1225	L<@@RXVT_WEBPAGE@@>	1480	L<http://software.schmorp.de/#rxvt-unicode>
1226		1481
1227	=back	1482	=back
1228		1483
1229	=head1 AUTHORS	1484	=head1 AUTHORS
1230		1485
…		…
1252		1507
1253	Project Coordinator (changes.txt 2.21a to 2.4.5)	1508	Project Coordinator (changes.txt 2.21a to 2.4.5)
1254		1509
1255	=item Geoff Wing L<< <gcw@pobox.com> >>	1510	=item Geoff Wing L<< <gcw@pobox.com> >>
1256		1511
1257	Rewrote screen display and text selection routines. Project Coordinator	1512	Rewrote screen display and text selection routines.
		1513
1258	(changes.txt 2.4.6 - rxvt-unicode)	1514	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1259		1515
1260	=item Marc Alexander Lehmann L<< <rxvt@schmorp.de> >>	1516	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>
1261		1517
1262	Forked rxvt-unicode, rewrote most of the display code and internal	1518	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1263	character handling to store text in unicode, improve xterm	1519	extension, random hacks, numerous bugfixes and extensions.
1264	compatibility and apply numerous other bugfixes and extensions.
1265		1520
1266	Project Coordinator (Changes 1.0 -)	1521	Project Coordinator (Changes 1.0 -)
1267		1522
		1523	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>
		1524
		1525	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.
		1526
1268	=back	1527	=back
1269		1528

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.53 by root, Fri Feb 11 18:14:07 2005 UTC vs. Revision 1.111 by root, Tue Jan 31 00:25:16 2006 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.53 by root, Fri Feb 11 18:14:07 2005 UTC vs.
Revision 1.111 by root, Tue Jan 31 00:25:16 2006 UTC