[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.136 by root, Mon Aug 13 10:01:18 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
17	=head1 FREQUENTLY ASKED QUESTIONS	20	=head1 FREQUENTLY ASKED QUESTIONS
18		21
19	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of	22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
20	frequently asked questions and answer to them and some common	23	frequently asked questions and answer to them and some common
21	problems. That document is also accessible on the World-Wide-Web at	24	problems. That document is also accessible on the World-Wide-Web at
22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.	25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
23		26
24	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
25		28
26	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
27	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
…		…
30	like mongolian or scripts requiring extremely complex combining rules,	33	like mongolian or scripts requiring extremely complex combining rules,
31	like tibetan or devanagari. Don't expect pretty output when using these	34	like tibetan or devanagari. Don't expect pretty output when using these
32	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work	35	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work
33	fine, though. A somewhat difficult case are right-to-left scripts, such	36	fine, though. A somewhat difficult case are right-to-left scripts, such
34	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms	37	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms
35	belong into the application, not the terminal emulator (too many things --	38	belong in the application, not the terminal emulator (too many things --
36	such as cursor-movement while editing -- break otherwise), but that might	39	such as cursor-movement while editing -- break otherwise), but that might
37	change.	40	change.
38		41
39	If you are looking for a terminal that supports more exotic scripts, let	42	If you are looking for a terminal that supports more exotic scripts, let
40	me recommend C<mlterm>, which is a very user friendly, lean and clean	43	me recommend C<mlterm>, which is a very user friendly, lean and clean
…		…
89		92
90	Print out a message describing available options.	93	Print out a message describing available options.
91		94
92	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
93		96
94	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
95	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
96	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
97		100
98	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
99		102
100	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
101	resource B<depth>.	104	resource B<depth>.
102		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
103	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
104		118
105	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
106		120
107	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
113	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
114		128
115	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
116		130
117	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
118
119	=item B<-ip>\|B<+ip> \| B<-tr>\|B<+tr>
120
121	Turn on/off inheriting parent window's pixmap. Alternative form is
122	B<-tr>; resource B<inheritPixmap>.
123
124	I<Please note that transparency of any kind if completely unsupported by
125	the author. Don't bug him with installation questions! Read the FAQ (man 7
126	@@RXVT_NAME@@)!>
127		132
128	=item B<-fade> I<number>	133	=item B<-fade> I<number>
129		134
130	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
131	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
134	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
135		140
136	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
137	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
138		143
139	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
140		145
141	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
142	transparency is enabled with B<-tr> or B<-ip>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
143	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
144	used to brighten or darken the image in addition to tinting it.
145	Please note that certain tint colours can be applied on the server-side,
146	thus yielding performance gain of two orders of magnitude. These colours are:
147	blue, red, green, cyan, magenta, yellow, and those close to them; resource
148	I<tintColor>. Example:
149
150	@@RXVT_NAME@@ -tr -tint blue -sh 40
151
152	=item B<-sh> I<number>
153
154	Darken (0 .. 100) or lighten (-1 .. -100) the transparent
155	background image in addition to (or instead of) tinting it;
156	resource I<shading>.
157
158	=item B<-blt> I<string>
159
160	Specify background blending type. If background pixmap is specified
161	at the same time as transparency - such pixmap will be blended over
162	transparency image, using method specified. Supported values are :
163	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
164	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
165	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
166	alpha-blending; resource I<blendType>.
167
168	=item B<-blr> I<HxV>
169
170	Apply Gaussian Blur with the specified radii to the transparent
171	background image. If single number is specified - both vertical and
172	horizontal radii are considered to be the same. Setting one of the
173	radii to 1 and another to a large number creates interesting effects
174	on some backgrounds. Maximum radius value is 128; resource I<blurRadius>.
175		149
176	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
177		151
178	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
179		153
180	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
181		155
182	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
183
184	=item B<-pixmap> I<file[;geom]>
185
186	Compile I<afterimage>: Specify image file for the background and also
187	optionally specify its scaling with a geometry string. Note you may need to
188	add quotes to avoid special shell interpretation of the C<;> in the
189	command-line; for more details see resource B<backgroundPixmap>.
190		157
191	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
192		159
193	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
194		161
…		…
239	italic> >> characters are to be printed. See resource B<boldItalicFont>	206	italic> >> characters are to be printed. See resource B<boldItalicFont>
240	for details.	207	for details.
241		208
242	=item B<-is>\|B<+is>	209	=item B<-is>\|B<+is>
243		210
244	Compile I<font-styles>: Bold/Italic font styles imply high intensity	211	Compile I<font-styles>: Bold/Blink font styles imply high intensity
245	foreground/background (default). See resource B<intensityStyles> for	212	foreground/background (default). See resource B<intensityStyles> for
246	details.	213	details.
247		214
248	=item B<-name> I<name>	215	=item B<-name> I<name>
249		216
…		…
253		220
254	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
255		222
256	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
257		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
258	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
259		230
260	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
261	B<utmpInhibit>.	232	B<utmpInhibit>.
262		233
…		…
266	B<visualBell>.	237	B<visualBell>.
267		238
268	=item B<-sb>\|B<+sb>	239	=item B<-sb>\|B<+sb>
269		240
270	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>\|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>\|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
271		251
272	=item B<-si>\|B<+si>	252	=item B<-si>\|B<+si>
273		253
274	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
275	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
282	=item B<-sw>\|B<+sw>	262	=item B<-sw>\|B<+sw>
283		263
284	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
285	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
286	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
287
288	=item B<-sr>\|B<+sr>
289
290	Put scrollbar on right/left; resource B<scrollBar_right>.
291
292	=item B<-st>\|B<+st>
293
294	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
295	resource B<scrollBar_floating>.
296		267
297	=item B<-ptab>\|B<+ptab>	268	=item B<-ptab>\|B<+ptab>
298		269
299	If enabled (default), "Horizontal Tab" characters are being stored as	270	If enabled (default), "Horizontal Tab" characters are being stored as
300	actual wide characters in the screen buffer, which makes it possible to	271	actual wide characters in the screen buffer, which makes it possible to
…		…
304		275
305	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
306		277
307	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
308		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
309	=item B<-iconic>	284	=item B<-iconic>
310		285
311	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
312	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
313		288
…		…
329		304
330	=item B<-bl>	305	=item B<-bl>
331		306
332	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
333	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
334	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
335		311
336	=item B<-override-redirect>	312	=item B<-override-redirect>
337		313
338	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
339	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
340		321
341	=item B<-sbg>	322	=item B<-sbg>
342		323
343	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
344	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
347		328
348	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
349		330
350	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
351	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
352	B<linespace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
353		341
354	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
355		343
356	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
357	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
392	=item B<-pt> I<style>	380	=item B<-pt> I<style>
393		381
394	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
395	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
396		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
397	=item B<-im> I<text>	388	=item B<-im> I<text>
398		389
399	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
400		391
401	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
412		403
413	=item B<-tcw>	404	=item B<-tcw>
414		405
415	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
416	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
417	in-use. Instead of selecting a full line it will extend the selection the	408	in-use. Instead of selecting a full line it will extend the selection to
418	end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
419		410
420	=item B<-insecure>	411	=item B<-insecure>
421		412
422	Enable "insecure" mode, which currently enables most of the escape	413	Enable "insecure" mode, which currently enables most of the escape
423	sequences that echo strings. See the resource B<insecure> for more	414	sequences that echo strings. See the resource B<insecure> for more
…		…
443		434
444	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	435	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
445	will not immediately destroy its window when the program executed within	436	will not immediately destroy its window when the program executed within
446	it exits. Instead, it will wait till it is being killed or closed by the	437	it exits. Instead, it will wait till it is being killed or closed by the
447	user; resource B<hold>.	438	user; resource B<hold>.
		439
		440	=item B<-cd> I<path>
		441
		442	Sets the working directory for the shell (or the command specified via
		443	B<-e>). The I<path> must be an absolute path and it must exist for
		444	@@RXVT_NAME@@ to start; resource B<chdir>.
		445
		446	=item B<-xrm> I<string>
		447
		448	Works like the X Toolkit option of the same name, by adding the I<string>
		449	as if it were specified in a resource file. Resource values specified this
		450	way take precedence over all other resource specifications.
		451
		452	Note that you need to use the I<same> syntax as in the .Xdefaults file,
		453	e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific
		454	options can be specified as long-options on the commandline, so use
		455	of B<-xrm> is mostly limited to cases where you want to specify other
		456	resources (e.g. for input methods) or for compatibility with other
		457	programs.
448		458
449	=item B<-keysym.>I<sym> I<string>	459	=item B<-keysym.>I<sym> I<string>
450		460
451	Remap a key symbol. See resource B<keysym>.	461	Remap a key symbol. See resource B<keysym>.
452		462
…		…
487	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	497	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
488	entries and will not tinker with pty/tty permissions - you have to do that	498	entries and will not tinker with pty/tty permissions - you have to do that
489	yourself if you want that.	499	yourself if you want that.
490		500
491	As an extremely special case, specifying C<-1> will completely suppress	501	As an extremely special case, specifying C<-1> will completely suppress
492	pty/tty operations.	502	pty/tty operations, which is probably only useful in conjunction with some
		503	perl extension that manages the terminal.
493		504
494	Here is a example in perl that illustrates how this option can be used (a	505	Here is a example in perl that illustrates how this option can be used (a
495	longer example is in F<doc/pty-fd>):	506	longer example is in F<doc/pty-fd>):
496		507
497	use IO::Pty;	508	use IO::Pty;
…		…
511	Comma-separated list of perl extension scripts to use (or not to use) in	522	Comma-separated list of perl extension scripts to use (or not to use) in
512	this terminal instance. See resource B<perl-ext> for details.	523	this terminal instance. See resource B<perl-ext> for details.
513		524
514	=back	525	=back
515		526
516	=head1 RESOURCES (available also as long-options)	527	=head1 RESOURCES
517		528
518	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	529	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
519	options) compiled into your version.	530	options) compiled into your version. All resources are also available as
		531	long-options.
520		532
521	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
522	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
523	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
524	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
525		537
526	1. system-wide app-defaults file, either locale-dependent OR global
527	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
528	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
529	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
530	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
		543	6. resources specified via -xrm on the commandline
531		544
532	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
533	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
534	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily	547	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
535	configured, while the class name B<URxvt> allows resources unique to	548	configured, while the class name B<URxvt> allows resources unique to
…		…
545	=item B<depth:> I<bitdepth>	558	=item B<depth:> I<bitdepth>
546		559
547	Compile I<xft>: Attempt to find a visual with the given bit depth;	560	Compile I<xft>: Attempt to find a visual with the given bit depth;
548	option B<-depth>.	561	option B<-depth>.
549		562
		563	=item B<buffered:> I<boolean>
		564
		565	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		566	On some card/driver combination enabling it slightly decreases
		567	performance, on most it greatly helps it. The slowdown is small, so it
		568	should normally be enabled.
		569
550	=item B<geometry:> I<geom>	570	=item B<geometry:> I<geom>
551		571
552	Create the window with the specified X window geometry [default 80x24];	572	Create the window with the specified X window geometry [default 80x24];
553	option B<-geometry>.	573	option B<-geometry>.
554		574
…		…
567	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
568	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
569	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
570	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
571	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
572	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
573		593
574	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
575	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
576		596
577	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
588	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
589		609
590	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
591	foreground colour is the default.	611	foreground colour is the default.
592		612
593	=item B<colorRV:> I<colour>
594
595	Use the specified colour as the background for reverse video characters
596	when OPTION_HC is disabled (--disable-frills).
597
598	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
599		614
600	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
601	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
602		627
603	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
604		629
605	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
606	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
613		638
614	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
615		640
616	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
617	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
618	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
619		644
620	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
621		646
622	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
623	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
637		662
638	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
639	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
640	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
641		666
642	=item B<inheritPixmap:> I<boolean>
643
644	B<True>: make the background inherit the parent windows' pixmap, giving
645	artificial transparency. B<False>: do not inherit the parent windows'
646	pixmap.
647
648	I<Please note that transparency of any kind if completely unsupported by
649	the author. Don't bug him with installation questions!>
650
651	=item B<fading:> I<number>	667	=item B<fading:> I<number>
652		668
653	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
654		670
655	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
656		672
657	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
658	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
659		675
660	=item B<tintColor:> I<colour>	676	=item B<iconFile:> I<file>
661		677
662	Tint the transparent background pixmap with the given colour; option	678	Set the application icon pixmap; option B<-icon>.
663	B<-tint>.
664
665	=item B<shading:> I<number>
666
667	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
668	in addition to tinting it; option B<-sh>.
669
670	=item B<blendType:> I<string>
671
672	Specify background blending type; option B<-blt>.
673
674	=item B<blurRadius:> I<number>
675
676	Apply Gaussian Blurr with the specified radius to the transparent
677	background image; option B<-blr>.
678		679
679	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
680		681
681	Use the specified colour for the scrollbar [default #B2B2B2].	682	Use the specified colour for the scrollbar [default #B2B2B2].
682		683
…		…
687		688
688	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
689		690
690	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
691	and the text.	692	and the text.
692
693	=item B<backgroundPixmap:> I<file[;geom]>
694
695	Use the specified image file for the background and also optionally
696	specify its scaling with a geometry string B<WxH+X+Y>,
697	in which B<"W" / "H"> specify the horizontal/vertical scale (percent),
698	and B<"X" / "Y"> locate the image centre (percent).
699	A scale of 0 displays the image with tiling. A scale of 1 displays the
700	image without any scaling. A scale of 2 to 9 specifies an integer
701	number of images in that direction. No image will be magnified beyond
702	10 times its original size. The maximum permitted scale is 1000.
703	Special string of B<"auto"> used as a geometry will cause image to be
704	automatically scaled to match window size.
705	If used in conjunction with B<-tr> option - specified pixmap will be
706	blended over transparency image using either alpha-blending, or any
707	other blending type, specified with B<-blt "type"> option.
708	[default 0x0+50+50]
709
710	=item B<path:> I<path>
711
712	Specify the colon-delimited search path for finding XPM files.
713		693
714	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
715		695
716	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
717	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
740	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
741	wide and 15 pixels high.	721	wide and 15 pixels high.
742		722
743	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
744	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
745	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
746	useful supplement.	726	useful supplement.
747		727
748	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
749	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
750	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
774	text font will being used for the given style.	754	text font will being used for the given style.
775		755
776	=item B<intensityStyles:> I<boolean>	756	=item B<intensityStyles:> I<boolean>
777		757
778	When font styles are not enabled, or this option is enabled (B<True>,	758	When font styles are not enabled, or this option is enabled (B<True>,
779	option B<-is>, the default), bold and italic font styles imply high	759	option B<-is>, the default), bold/blink font styles imply high
780	intensity foreground/background colours. Disabling this option (B<False>,	760	intensity foreground/background colours. Disabling this option (B<False>,
781	option B<+is>) disables this behaviour, the high intensity colours are not	761	option B<+is>) disables this behaviour, the high intensity colours are not
782	reachable.	762	reachable.
783		763
784	=item B<selectstyle:> I<mode>
785
786	Set mouse selection style to B<old> which is 2.20, B<oldword> which
787	is xterm style with 2.20 old word selection, or anything else which
788	gives xterm style selection. Only effective when the original (non-perl)
789	selection code is in use.
790
791	=item B<scrollstyle:> I<mode>
792
793	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
794	the author's favourite.
795
796	=item B<title:> I<string>	764	=item B<title:> I<string>
797		765
798	Set window title string, the default title is the command-line	766	Set window title string, the default title is the command-line
799	specified after the B<-e> option, if any, otherwise the application	767	specified after the B<-e> option, if any, otherwise the application
800	name; option B<-title>.	768	name; option B<-title>.
…		…
813	=item B<urgentOnBell:> I<boolean>	781	=item B<urgentOnBell:> I<boolean>
814		782
815	B<True>: set the urgency hint for the wm on receipt of a bell character.	783	B<True>: set the urgency hint for the wm on receipt of a bell character.
816	B<False>: do not set the urgency hint [default].	784	B<False>: do not set the urgency hint [default].
817		785
		786	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		787
818	=item B<visualBell:> I<boolean>	788	=item B<visualBell:> I<boolean>
819		789
820	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	790	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
821	B<False>: no visual bell [default]; option B<+vb>.	791	B<False>: no visual bell [default]; option B<+vb>.
822		792
…		…
824		794
825	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
826	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
827	[default]; option B<+ls>.	797	[default]; option B<+ls>.
828		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
829	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
830		805
831	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
832	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
833	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
845	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	820	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
846		821
847	This creates a new file in your home directory with the screen contents	822	This creates a new file in your home directory with the screen contents
848	every time you hit C<Print>.	823	every time you hit C<Print>.
849		824
		825	=item B<scrollstyle:> I<mode>
		826
		827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		828	the author's favourite.
		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
850	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
851		835
852	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
853	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
854		838
…		…
873	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
874	B<+si>.	858	B<+si>.
875		859
876	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
877		861
878	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
879	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
880	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
881		866
882	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
883		868
884	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
885	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
886	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
887	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
888		873
889	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
890		875
891	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
892	resource is limited on most machines to 65535; option B<-sl>.
893		877
894	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
895		879
896	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
897	option B<-b>.	881	option B<-b>.
…		…
916	=item B<termName:> I<termname>	900	=item B<termName:> I<termname>
917		901
918	Specifies the terminal type name to be set in the B<TERM> environment	902	Specifies the terminal type name to be set in the B<TERM> environment
919	variable; option B<-tn>.	903	variable; option B<-tn>.
920		904
921	=item B<linespace:> I<number>	905	=item B<lineSpace:> I<number>
922		906
923	Specifies number of lines (pixel height) to insert between each row of	907	Specifies number of lines (pixel height) to insert between each row of
924	the display [default 0]; option B<-lsp>.	908	the display [default 0]; option B<-lsp>.
925		909
926	=item B<meta8:> I<boolean>	910	=item B<meta8:> I<boolean>
…		…
940		924
941	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
942		926
943	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
944	option B<-bc>.	928	option B<-bc>.
		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
945		934
946	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
947		936
948	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
949	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
…		…
955		944
956	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
957		946
958	Mouse pointer background colour.	947	Mouse pointer background colour.
959		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
960	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
961		956
962	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
963	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
964		959
965	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
966		961
967	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
968	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
969	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
970	escape sequence.	965	escape sequence.
971		966
972	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
973		968
…		…
986	will be created). In this mode, characters outside ISO-8859-1 can be used.	981	will be created). In this mode, characters outside ISO-8859-1 can be used.
987		982
988	When the selection extension is not used, only ISO-8859-1 characters can	983	When the selection extension is not used, only ISO-8859-1 characters can
989	be used. If not specified, the built-in default is used:	984	be used. If not specified, the built-in default is used:
990		985
991	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
992		987
993	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
994		989
995	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
996		991
997	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
998		993
999	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1000		995
…		…
1052		1047
1053	=item B<secondaryScroll:> I<boolean>	1048	=item B<secondaryScroll:> I<boolean>
1054		1049
1055	Turn on/off secondary screen scroll (default enabled). If this	1050	Turn on/off secondary screen scroll (default enabled). If this
1056	option is enabled, scrolls on the secondary screen will change the	1051	option is enabled, scrolls on the secondary screen will change the
1057	scrollback buffer and switching to/from the secondary screen will	1052	scrollback buffer and, when secondaryScreen is off, switching
1058	instead scroll the screen up.	1053	to/from the secondary screen will instead scroll the screen up.
1059		1054
1060	=item B<hold>: I<boolean>	1055	=item B<hold>: I<boolean>
1061		1056
1062	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1057	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1063	will not immediately destroy its window when the program executed within	1058	will not immediately destroy its window when the program executed within
1064	it exits. Instead, it will wait till it is being killed or closed by the	1059	it exits. Instead, it will wait till it is being killed or closed by the
1065	user.	1060	user.
1066		1061
		1062	=item B<chdir>: I<path>
		1063
		1064	Sets the working directory for the shell (or the command specified via
		1065	B<-e>). The I<path> must be an absolute path and it must exist for
		1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1067	directory will be used; option B<-cd>.
		1068
1067	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1068		1070
1069	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1070	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1071		1073
1072	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1073	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1074	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1075	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1076	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1085	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1086	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1087	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1077		1088
1078	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1089	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1079	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1090	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1080	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1091	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1081	current application keymap mode state.	1092	current application keymap mode state.
1082		1093
1083	The spellings of I<key> can be obtained by using B<xev>(1) command or	1094	Due the the large number of modifier combinations, a key mapping will
1084	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1095	match if I<at least> the specified identifiers are being set, and no other
		1096	key mappings with those and more bits are being defined. That means that
		1097	defining a mapping for C<a> will automatically provide definitions for
		1098	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1099	themselves. See the C<builtin:> action, below, for a way to work around
		1100	this when this is a problem.
		1101
		1102	The spelling of I<key> depends on your implementation of X. An easy way to
		1103	find a key name is to use the B<xev>(1) command. You can find a list by
		1104	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1085	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1105	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1086	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1106	value (B<0x0000 - 0xFFFF>).
1087	performed in an exact manner; however, the closest match is assured.
1088		1107
1089	I<string> may contain escape values (C<\a>: bell, C<\b>: backspace,	1108	As with any resource value, the I<action> string may contain backslash
1090	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,	1109	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1091	C<\000>: octal number) or verbatim control characters (C<^?>: delete,	1110	number), see RESOURCES in C<man 7 X> for further details.
1092	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it
1093	can start or end with whitespace. B<This feature is deprecated and will
1094	be removed>.
1095		1111
1096	Please note that you need to double the C<\> in resource files, as	1112	An action starts with an action prefix that selects a certain type
1097	Xlib itself does its own de-escaping (you can use C<\033> instead of	1113	of action, followed by a colon. An action string without colons is
1098	C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own	1114	interpreted as a literal string to pass to the tty (as if it was
1099	processing).	1115	prefixed with C<string:>).
1100		1116
1101	You can define a range of keysyms in one shot by providing a I<string>	1117	The following action prefixes are known - extensions can provide
1102	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1118	additional prefixes:
		1119
		1120	=over 4
		1121
		1122	=item string:STRING
		1123
		1124	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1125	then the remaining C<STRING> will be passed to the program running in the
		1126	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1127	string C<echo rm -rf /> followed by a newline:
		1128
		1129	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1130
		1131	This could in theory be used to completely redefine your keymap.
		1132
		1133	In addition, for actions of this type, you can define a range of
		1134	keysyms in one shot by loading the C<keysym-list> perl extension and
		1135	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1103	should be a character not used by the strings.	1136	the delimiter `/' should be a character not used by the strings.
1104		1137
1105	Its usage can be demonstrated by an example:	1138	Its usage can be demonstrated by an example:
1106		1139
1107	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1140	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1108		1141
1109	The above line is equivalent to the following three lines:	1142	The above line is equivalent to the following three lines:
1110		1143
1111	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1144	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1112	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1145	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1113	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1146	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1114		1147
		1148	=item command:STRING
		1149
1115	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1150	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1116	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1151	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1152	the opposite of C<string:> - instead of sending it to the program running
		1153	in the terminal, it will be treated as if it were program output). This is
		1154	most useful to feed command sequences into @@RXVT_NAME@@.
		1155
1117	example the following means "change the current locale to C<zh_CN.GBK>	1156	For example the following means "change the current locale to C<zh_CN.GBK>
1118	when Control-Meta-c is being pressed":	1157	when Control-Meta-c is being pressed":
1119		1158
1120	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1159	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1121		1160
1122	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1161	The following example will map Control-Meta-1 and Control-Meta-2 to
1123	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1162	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1124	manpage. For example, the F<selection> extension (activated via	1163	font-switching at runtime:
1125	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1126		1164
1127	URxvt.keysym.M-C-c: perl:selection:rot13	1165	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1166	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1128		1167
1129	Due the the large number of modifier combinations, a defined key mapping	1168	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1130	will match if at I<at least> the specified identifiers are being set, and	1169	info):
1131	no other key mappings with those and more bits are being defined. That
1132	means that defining a key map for C<a> will automatically provide
1133	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1134	mappings themselves.
1135		1170
1136	Unfortunately, this will override built-in key mappings. For example	1171	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1172	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1173
		1174	=item builtin:
		1175
		1176	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1177	key binding existed for the key combination. The obvious use is to undo
		1178	the effect of existing bindings. The not so obvious use is to reinstate
		1179	bindings when another binding overrides too many modifiers.
		1180
1137	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1181	For example if you overwrite the C<Insert> key you will disable
1138	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1182	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1139	user-defined keymap using the C<builtin:> replacement:	1183	"holes" into the user-defined keymap using the C<builtin:> replacement:
1140		1184
1141	URxvt.keysym.Insert: <my insert key sequence>	1185	URxvt.keysym.Insert: <my insert key sequence>
1142	URxvt.keysym.S-Insert: builtin:	1186	URxvt.keysym.S-Insert: builtin:
1143		1187
1144	The first line defines a mapping for C<Insert> and I<any> combination	1188	The first line defines a mapping for C<Insert> and I<any> combination
1145	of modifiers. The second line re-establishes the default mapping for	1189	of modifiers. The second line re-establishes the default mapping for
1146	C<Shift-Insert>.	1190	C<Shift-Insert>.
1147		1191
1148	The following example will map Control-Meta-1 and Control-Meta-2 to	1192	=item builtin-string:
1149	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1150	font-switching at runtime:
1151		1193
1152	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1194	This action is mainly useful to restore string mappings for keys that
1153	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1195	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1196	difficult to explain - basically, this action will send the string to the
		1197	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1198	action for it.
1154		1199
1155	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1200	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1156	info):	1201	selection when you press C<Shift-Insert>. With the following bindings, it
		1202	would instead emit the (undocumented, but what applications running in the
		1203	terminal might expect) sequence C<ESC [ 2 $> instead:
1157		1204
1158	URxvt.keysym.M-C-3: command:\033[8;25;80t	1205	URxvt.keysym.S-Insert: builtin-string:
1159	URxvt.keysym.M-C-4: command:\033[8;48;110t	1206	URxvt.keysym.C-S-Insert: builtin:
		1207
		1208	The first line disables the paste functionality for that key
		1209	combination, and the second reinstates the default behaviour for
		1210	C<Control-Shift-Insert>, which would otherwise be overridden.
		1211
		1212	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1213	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1214	this:
		1215
		1216	URxvt.keysym.C-M-c: builtin-string:
		1217	URxvt.keysym.C-M-v: builtin-string:
		1218
		1219	=item EXTENSION:STRING
		1220
		1221	An action of this form invokes the action B<STRING>, if any, provided
		1222	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1223	be loaded automatically if necessary.
		1224
		1225	Not all extensions define actions, but popular extensions that do
		1226	include the I<selection> and I<matcher> extensions (documented in their
		1227	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1228	respectively).
		1229
		1230	From the silly examples department, this will rot13-"encrypt"
		1231	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1232	keyboards:
		1233
		1234	URxvt.keysym.M-C-c: selection:rot13
		1235
		1236	=item perl:STRING DEPRECATED
		1237
		1238	This is a deprecated way of invoking commands provided by perl
		1239	extensions. It is still supported, but should not be used anymore.
		1240
		1241	=back
1160		1242
1161	=item B<perl-ext-common>: I<string>	1243	=item B<perl-ext-common>: I<string>
1162		1244
1163	=item B<perl-ext>: I<string>	1245	=item B<perl-ext>: I<string>
1164		1246
…		…
1166	use in this terminal instance; option B<-pe>.	1248	use in this terminal instance; option B<-pe>.
1167		1249
1168	Extension names can be prefixed with a C<-> sign to prohibit using	1250	Extension names can be prefixed with a C<-> sign to prohibit using
1169	them. This can be useful to selectively disable some extensions loaded	1251	them. This can be useful to selectively disable some extensions loaded
1170	by default, or specified via the C<perl-ext-common> resource. For	1252	by default, or specified via the C<perl-ext-common> resource. For
1171	example, C<default,-selection> will use all the default extension except	1253	example, C<default,-selection> will use all the default extensions except
1172	C<selection>.	1254	C<selection>.
1173		1255
1174	Extension names can also be followed by an argument in angle brackets	1256	The default set includes the C<selection>, C<option-popup>,
1175	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1257	C<selection-popup>, C<readline> and C<searchable-scrollback>
1176	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1258	extensions, and extensions which are mentioned in B<keysym> resources.
1177	multiple times with different arguments will pass multiple arguments to	1259
1178	the extension.	1260	Any extension such that a corresponding resource is given on the
		1261	command line is automatically appended to B<perl-ext>.
1179		1262
1180	Each extension is looked up in the library directories, loaded if	1263	Each extension is looked up in the library directories, loaded if
1181	necessary, and bound to the current terminal instance.	1264	necessary, and bound to the current terminal instance. When the library
		1265	search path contains multiple extension files of the same name, then the
		1266	first one found will be used.
1182		1267
1183	If both of these resources are the empty string, then the perl	1268	If both of these resources are the empty string, then the perl interpreter
1184	interpreter will not be initialized. The idea behind two options is that	1269	will not be initialized. The rationale for having two options is that
1185	B<perl-ext-common> will be used for extensions that should be available to	1270	B<perl-ext-common> will be used for extensions that should be available to
1186	all instances, while B<perl-ext> is used for specific instances.	1271	all instances, while B<perl-ext> is used for specific instances.
1187		1272
1188	=item B<perl-eval>: I<string>	1273	=item B<perl-eval>: I<string>
1189		1274
1190	Perl code to be evaluated when all extensions have been registered. See	1275	Perl code to be evaluated when all extensions have been registered. See
1191	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1276	the @@RXVT_NAME@@perl(3) manpage.
1192	will be ignored when running setuid/setgid.
1193		1277
1194	=item B<perl-lib>: I<path>	1278	=item B<perl-lib>: I<path>
1195		1279
1196	Colon-separated list of additional directories that hold extension	1280	Colon-separated list of additional directories that hold extension
1197	scripts. When looking for extensions specified by the C<perl> resource,	1281	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1198	@@RXVT_NAME@@ will first look in these directories and then in	1282	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1199	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1283	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1200	will be ignored when running setuid/setgid.
1201		1284
1202	See the @@RXVT_NAME@@perl(3) manpage.	1285	See the @@RXVT_NAME@@perl(3) manpage.
1203		1286
1204	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1287	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1205		1288
…		…
1209	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1292	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1210		1293
1211	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1294	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1212	for details.	1295	for details.
1213		1296
1214	=item B<searchable-scrollback:> I<keysym>	1297	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1215		1298
1216	Sets the hotkey that starts the incremental scrollback buffer search	1299	This resource is deprecated and will be removed. Use a B<keysym> resource
1217	(default: C<M-s>).	1300	instead, e.g.:
1218		1301
		1302	URxvt.keysym.M-s: searchable-scrollback:start
		1303
1219	=item B<urlLauncher>: I<string>	1304	=item B<url-launcher>: I<string>
1220		1305
1221	Specifies the program to be started with a URL argument. Used by the	1306	Specifies the program to be started with a URL argument. Used by the
1222	C<selection-popup> and C<matcher> perl extensions.	1307	C<selection-popup> and C<matcher> perl extensions.
1223		1308
1224	=item B<transient-for>: I<windowid>	1309	=item B<transient-for>: I<windowid>
…		…
1227		1312
1228	=item B<override-redirect>: I<boolean>	1313	=item B<override-redirect>: I<boolean>
1229		1314
1230	Compile I<frills>: Sets override-redirect for the terminal window, making	1315	Compile I<frills>: Sets override-redirect for the terminal window, making
1231	it almost invisible to window managers; option B<-override-redirect>.	1316	it almost invisible to window managers; option B<-override-redirect>.
		1317
		1318	=item B<iso14755:> I<boolean>
		1319
		1320	Turn on/off ISO 14755 (default enabled).
1232		1321
1233	=item B<iso14755_52:> I<boolean>	1322	=item B<iso14755_52:> I<boolean>
1234		1323
1235	Turn on/off ISO 14755 5.2 mode (default enabled).	1324	Turn on/off ISO 14755 5.2 mode (default enabled).
1236		1325
…		…
1288	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1377	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1289	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1378	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1290		1379
1291	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1380	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1292	inserted too.	1381	inserted too.
		1382
		1383	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1384	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1385	binding causes the value of the internal selection to be copied to the
		1386	CLIPBOARD selection, while the second binding causes the value of the
		1387	CLIPBOARD selection to be inserted.
1293		1388
1294	=back	1389	=back
1295		1390
1296	=head1 CHANGING FONTS	1391	=head1 CHANGING FONTS
1297		1392
…		…
1379	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1474	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1380	it can be seen via the I<who(1)> command, and can accept messages. To	1475	it can be seen via the I<who(1)> command, and can accept messages. To
1381	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1476	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1382	on some systems or setgid to root or to some other group on others.	1477	on some systems or setgid to root or to some other group on others.
1383		1478
1384	=head1 COLORS AND GRAPHICS	1479	=head1 COLOURS AND GRAPHICS
1385		1480
1386	In addition to the default foreground and background colours,	1481	In addition to the default foreground and background colours,
1387	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1482	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1388	high-intensity bold/blink versions of the same). Here is a list of the	1483	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1389	colours with their names.	1484	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1485	cube plus a 8 (24) colour greyscale ramp.
		1486
		1487	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1488	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1489	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1490	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1491	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1492	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1493	use many similar 24-bit colours. It's typically not a problem in common
		1494	scenarios.
		1495
		1496	Here is a list of the ANSI colours with their names.
1390		1497
1391	=begin table	1498	=begin table
1392		1499
1393	B<color0> (black) = Black	1500	B<color0> (black) = Black
1394	B<color1> (red) = Red3	1501	B<color1> (red) = Red3
…		…
1414	It is also possible to specify the colour values of B<foreground>,	1521	It is also possible to specify the colour values of B<foreground>,
1415	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1522	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1416	a number 0-15, as a convenient shorthand to reference the colour name of	1523	a number 0-15, as a convenient shorthand to reference the colour name of
1417	color0-color15.	1524	color0-color15.
1418		1525
1419	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1526	The following text gives values for the standard 88 colour mode (and
1420	additional 72 colours. The first 64 of those (with indices 16 to 79)	1527	values for the 256 colour mode in parentheses).
1421	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1422	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1423		1528
		1529	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1530
		1531	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1532	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1533
		1534	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1535	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1536	the RGB cube.
		1537
1424	Together, all those colours implement the 88 colour xterm colours. Only	1538	Together, all those colours implement the 88 (256) colour xterm
1425	the first 16 can be changed using resources currently, the rest can only	1539	colours. Only the first 16 can be changed using resources currently, the
1426	be changed via command sequences ("escape codes").	1540	rest can only be changed via command sequences ("escape codes").
		1541
		1542	Applications are advised to use terminfo or command sequences to discover
		1543	number and RGB values of all colours (yes, you can query this...).
1427		1544
1428	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1545	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1429	always swapping the foreground/background colours. This is in contrast to	1546	always swapping the foreground/background colours. This is in contrast to
1430	I<xterm>(1) where the colours are only swapped if they have not otherwise	1547	I<xterm>(1) where the colours are only swapped if they have not otherwise
1431	been specified. For example,	1548	been specified. For example,
1432		1549
1433	=over 4
1434
1435	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1550	@@RXVT_NAME@@ -fg Black -bg White -rv
1436		1551
1437	would yield White on Black, while on I<xterm>(1) it would yield Black	1552	would yield White on Black, while on I<xterm>(1) it would yield Black on
1438	on White.	1553	White.
1439
1440	=back
1441		1554
1442	=head2 ALPHA CHANNEL SUPPORT	1555	=head2 ALPHA CHANNEL SUPPORT
1443		1556
1444	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1557	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1445	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1558	their act together, rxvt-unicode will do its own alpha channel management:
1446	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1559
1447	in addition to the ones provided by X, where the additional A component	1560	You can prefix any colour with an opaqueness percentage enclosed in
		1561	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1562	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1563	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1564	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1565	is the recommended format to specify transparency values, and works with
		1566	all ways to specify a colour.
		1567
		1568	For complete control, rxvt-unicode also supports
		1569	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1570	specifications, where the additional C<aaaa> component specifies opacity
1448	specifies opacity (alpha) values. The minimum value of C<0> is completely	1571	(alpha) values. The minimum value of C<0000> is completely transparent,
1449	transparent). You can also prefix any color with C<[percent]>, where	1572	while C<ffff> is completely opaque). The two example colours from
1450	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1573	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1451	the color, where C<0> is completely transparent and C<100> is completelxy	1574	C<rgba:0000/ff00/0000/f332>.
1452	opaque.
1453		1575
1454	You probably need to specify B<"-depth 32">, too, and have the luck that	1576	You probably need to specify B<"-depth 32">, too, to force a visual with
1455	your X-server uses ARGB pixel layout, as X is far from just supporting	1577	alpha channels, and have the luck that your X-server uses ARGB pixel
1456	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1578	layout, as X is far from just supporting ARGB visuals out of the box, and
		1579	rxvt-unicode just fudges around.
1457		1580
1458	For example, the following selects an almost completely transparent red	1581	For example, the following selects an almost completely transparent black
1459	background, and an almost opaque pink foreground:	1582	background, and an almost opaque pink foreground:
1460		1583
1461	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1584	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1462		1585
1463	I<Please note that transparency of any kind if completely unsupported by	1586	When not using a background image, then the interpretation of the
1464	the author. Don't bug him with installation questions!>	1587	alpha channel is up to your compositing manager (most interpret it as
		1588	transparency of course).
		1589
		1590	When using a background pixmap or pseudo-transparency, then the background
		1591	colour will always behave as if it were completely transparent (so the
		1592	background image shows instead), regardless of how it was specified, while
		1593	other colours will either be transparent as specified (the background
		1594	image will show through) on servers supporting the RENDER extension, or
		1595	fully opaque on servers not supporting the RENDER EXTENSION.
		1596
		1597	Please note that due to bugs in Xft, specifying alpha values might result
		1598	in garbage being displayed when the X-server does not support the RENDER
		1599	extension.
1465		1600
1466	=head1 ENVIRONMENT	1601	=head1 ENVIRONMENT
1467		1602
1468	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1603	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1469		1604
…		…
1475	resources or on the command line.	1610	resources or on the command line.
1476		1611
1477	=item B<COLORTERM>	1612	=item B<COLORTERM>
1478		1613
1479	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was	1614	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was
1480	compiled with XPM support, and optionally with the added extension	1615	compiled with background image support, and optionally with the added
1481	C<-mono> to indicate that rxvt-unicode runs on a monochrome screen.	1616	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome
		1617	screen.
1482		1618
1483	=item B<COLORFGBG>	1619	=item B<COLORFGBG>
1484		1620
1485	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is	1621	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
1486	the colour code used as default foreground/text colour (or the string	1622	the colour code used as default foreground/text colour (or the string
1487	C<default> to indicate that the default-colour escape sequence is to be	1623	C<default> to indicate that the default-colour escape sequence is to be
1488	used), C<bg> is the colour code used as default background colour (or the	1624	used), C<bg> is the colour code used as default background colour (or the
1489	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@	1625	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
1490	was compiled with XPM support. Libraries like C<ncurses> and C<slang> can	1626	was compiled with background image support. Libraries like C<ncurses>
1491	(and do) use this information to optimize screen output.	1627	and C<slang> can (and do) use this information to optimize screen output.
1492		1628
1493	=item B<WINDOWID>	1629	=item B<WINDOWID>
1494		1630
1495	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel	1631	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
1496	window, which usually has subwindows for the scrollbar, the terminal	1632	window, which usually has subwindows for the scrollbar, the terminal
…		…
1502	C<--with-terminfo=PATH>.	1638	C<--with-terminfo=PATH>.
1503		1639
1504	=item B<DISPLAY>	1640	=item B<DISPLAY>
1505		1641
1506	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1642	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1507	display in its child processes.	1643	display in its child processes if C<-display> isn't used to override. It
		1644	defaults to C<:0> if it doesn't exist.
1508		1645
1509	=item B<SHELL>	1646	=item B<SHELL>
1510		1647
1511	The shell to be used for command execution, defaults to C</bin/sh>.	1648	The shell to be used for command execution, defaults to C</bin/sh>.
1512		1649
1513	=item B<RXVT_SOCKET>	1650	=item B<RXVT_SOCKET> [I<sic>]
1514		1651
1515	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1652	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1516	@@RXVT_NAME@@d(1).	1653	@@RXVT_NAME@@d(1).
1517		1654
1518	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1655	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1656
		1657	=item B<URXVT_PERL_LIB>
		1658
		1659	Additional F<:>-separated library search path for perl extensions. Will be
		1660	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1661	directory.
		1662
		1663	=item B<URXVT_PERL_VERBOSITY>
		1664
		1665	See L<@@RXVT_NAME@@perl>(3).
1519		1666
1520	=item B<HOME>	1667	=item B<HOME>
1521		1668
1522	Used to locate the default directory for the unix domain socket for	1669	Used to locate the default directory for the unix domain socket for
1523	daemon communications and to locate various resource files (such as	1670	daemon communications and to locate various resource files (such as
1524	C<.Xdefaults>)	1671	C<.Xdefaults>)
1525		1672
1526	=item B<XAPPLRESDIR>	1673	=item B<XAPPLRESDIR>
1527		1674
1528	Directory where various X resource files are being located.	1675	Directory where application-specific X resource files are located.
1529		1676
1530	=item B<XENVIRONMENT>	1677	=item B<XENVIRONMENT>
1531		1678
1532	If set and accessible, gives the name of a X resource file to be loaded by	1679	If set and accessible, gives the name of a X resource file to be loaded by
1533	@@RXVT_NAME@@.	1680	@@RXVT_NAME@@.
…		…
1538		1685
1539	=over 4	1686	=over 4
1540		1687
1541	=item B</usr/lib/X11/rgb.txt>	1688	=item B</usr/lib/X11/rgb.txt>
1542		1689
1543	Color names.	1690	Colour names.
1544		1691
1545	=back	1692	=back
1546		1693
1547	=head1 SEE ALSO	1694	=head1 SEE ALSO
1548		1695
		1696	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1549	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1697	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1550		1698
1551	=head1 CURRENT PROJECT COORDINATOR	1699	=head1 CURRENT PROJECT COORDINATOR
1552		1700
1553	=over 4	1701	=over 4
1554		1702
1555	=item Project Coordinator	1703	=item Project Coordinator
1556		1704
1557	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1705	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1558		1706
1559	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1707	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1560		1708
1561	=back	1709	=back
1562		1710
…		…
1566		1714
1567	=item John Bovey	1715	=item John Bovey
1568		1716
1569	University of Kent, 1992, wrote the original Xvt.	1717	University of Kent, 1992, wrote the original Xvt.
1570		1718
1571	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1719	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1572		1720
1573	very heavily modified Xvt and came up with Rxvt	1721	very heavily modified Xvt and came up with Rxvt
1574		1722
1575	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1723	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1576		1724
1577	wrote the Greek Keyboard Input (no longer in code)	1725	wrote the Greek Keyboard Input (no longer in code)
1578		1726
1579	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1727	=item mj olesen <olesen@me.QueensU.CA>
1580		1728
1581	Wrote the menu system.	1729	Wrote the menu system.
1582		1730
1583	Project Coordinator (changes.txt 2.11 to 2.21)	1731	Project Coordinator (changes.txt 2.11 to 2.21)
1584		1732
1585	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1733	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1586		1734
1587	Project Coordinator (changes.txt 2.21a to 2.4.5)	1735	Project Coordinator (changes.txt 2.21a to 2.4.5)
1588		1736
1589	=item Geoff Wing L<< <gcw@pobox.com> >>	1737	=item Geoff Wing <gcw@pobox.com>
1590		1738
1591	Rewrote screen display and text selection routines.	1739	Rewrote screen display and text selection routines.
1592		1740
1593	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1741	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1594		1742
1595	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1743	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1596		1744
1597	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1745	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1598	extension, random hacks, numerous bugfixes and extensions.	1746	extension, random hacks, numerous bugfixes and extensions.
1599		1747
1600	Project Coordinator (Changes 1.0 -)	1748	Project Coordinator (Changes 1.0 -)
1601		1749
1602	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1750	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1603		1751
1604	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1752	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1605		1753
1606	=back	1754	=back
1607		1755

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.136 by root, Mon Aug 13 10:01:18 2007 UTC vs. Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.136 by root, Mon Aug 13 10:01:18 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC