[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.141 by sasha, Mon Oct 29 13:40:41 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

…		…
12	emulator intended as an I<xterm>(1) replacement for users who do not	12	emulator intended as an I<xterm>(1) replacement for users who do not
13	require features such as Tektronix 4014 emulation and toolkit-style	13	require features such as Tektronix 4014 emulation and toolkit-style
14	configurability. As a result, B<rxvt-unicode> uses much less swap space --	14	configurability. As a result, B<rxvt-unicode> uses much less swap space --
15	a significant advantage on a machine serving many X sessions.	15	a significant advantage on a machine serving many X sessions.
16		16
		17	This document is also available on the World-Wide-Web at
		18	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
		19
17	=head1 FREQUENTLY ASKED QUESTIONS	20	=head1 FREQUENTLY ASKED QUESTIONS
18		21
19	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of	22	See @@RXVT_NAME@@(7) (try C<man 7 @@RXVT_NAME@@>) for a list of
20	frequently asked questions and answer to them and some common	23	frequently asked questions and answer to them and some common
21	problems. That document is also accessible on the World-Wide-Web at	24	problems. That document is also accessible on the World-Wide-Web at
22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.	25	L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
23		26
24	=head1 RXVT-UNICODE VS. RXVT	27	=head1 RXVT-UNICODE VS. RXVT
25		28
26	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode	29	Unlike the original rxvt, B<rxvt-unicode> stores all text in Unicode
27	internally. That means it can store and display most scripts in the	30	internally. That means it can store and display most scripts in the
…		…
30	like mongolian or scripts requiring extremely complex combining rules,	33	like mongolian or scripts requiring extremely complex combining rules,
31	like tibetan or devanagari. Don't expect pretty output when using these	34	like tibetan or devanagari. Don't expect pretty output when using these
32	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work	35	scripts. Most other scripts, latin, cyrillic, kanji, thai etc. should work
33	fine, though. A somewhat difficult case are right-to-left scripts, such	36	fine, though. A somewhat difficult case are right-to-left scripts, such
34	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms	37	as hebrew: B<rxvt-unicode> adopts the view that bidirectional algorithms
35	belong into the application, not the terminal emulator (too many things --	38	belong in the application, not the terminal emulator (too many things --
36	such as cursor-movement while editing -- break otherwise), but that might	39	such as cursor-movement while editing -- break otherwise), but that might
37	change.	40	change.
38		41
39	If you are looking for a terminal that supports more exotic scripts, let	42	If you are looking for a terminal that supports more exotic scripts, let
40	me recommend C<mlterm>, which is a very user friendly, lean and clean	43	me recommend C<mlterm>, which is a very user friendly, lean and clean
…		…
89		92
90	Print out a message describing available options.	93	Print out a message describing available options.
91		94
92	=item B<-display> I<displayname>	95	=item B<-display> I<displayname>
93		96
94	Attempt to open a window on the named X display (B<-d> still	97	Attempt to open a window on the named X display (the older form B<-d>
95	respected). In the absence of this option, the display specified by the	98	is still respected. but deprecated). In the absence of this option, the
96	B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
97		100
98	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
99		102
100	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
101	resource B<depth>.	104	resource B<depth>.
102		105
		106	[Please note that many X servers (and libXft) are buggy with
		107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
		108	of graphical corruption. This is harmless, but we can't do anything about
		109	this, so watch out]
		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
103	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
104		118
105	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
106		120
107	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
113	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
114		128
115	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
116		130
117	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
118
119	=item B<-tr>\|B<+tr>
120
121	Turn on/off illusion of a transparent window background. Obsolete form of it is
122	B<-ip> and it should not be used anymore; resource B<transparent>.
123
124	I<Please note that old resource name of B<inheritPixmap> is obsolete and should be
125	changed to B<transparent>. Backwards compatibility support for B<inheritPixmap> will
126	be phased out in future versions of rxvt!>
127
128	I<Please address all transparency related issues to Sasha Vasko at
129	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
130		132
131	=item B<-fade> I<number>	133	=item B<-fade> I<number>
132		134
133	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
134	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
137	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
138		140
139	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
140	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
141		143
142	=item B<-tint> I<colour>	144	=item B<-icon> I<file>
143		145
144	Tint the transparent background pixmap with the given colour when	146	Compile I<pixbuf>: Use the specified image as application icon. This
145	transparency is enabled with B<-tr>. This only works for	147	is used by many window managers, taskbars and pagers to represent the
146	non-tiled backgrounds, currently. See also the B<-sh> option that can be	148	application window; resource I<iconFile>.
147	used to brighten or darken the image in addition to tinting it.
148	Please note that certain tint colours can be applied on the server-side,
149	thus yielding performance gain of two orders of magnitude. These colours are:
150	blue, red, green, cyan, magenta, yellow, and those close to them. Also
151	pure black and pure white colors essentialy mean no tinting; resource
152	I<tintColor>. Example:
153
154	@@RXVT_NAME@@ -tr -tint blue -sh 40
155
156	=item B<-sh> I<number>
157
158	Darken (0 .. 100) or lighten (100 .. 200) the transparent
159	background image in addition to (or instead of) tinting it;
160	resource I<shading>.
161
162	=item B<-blt> I<string>
163
164	Specify background blending type. If background pixmap is specified
165	at the same time as transparency - such pixmap will be blended over
166	transparency image, using method specified. Supported values are :
167	B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
168	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
169	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
170	alpha-blending. Compile I<afterimage>; resource I<blendType>.
171
172	=item B<-blr> I<HxV>
173
174	Apply Gaussian Blur with the specified radii to the transparent
175	background image. If single number is specified - both vertical and
176	horizontal radii are considered to be the same. Setting one of the
177	radii to 1 and another to a large number creates interesting effects
178	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
179	resource I<blurRadius>.
180		149
181	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
182		151
183	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
184		153
185	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
186		155
187	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
188
189	=item B<-pixmap> I<file[;geom]>
190
191	Compile I<afterimage>: Specify image file for the background and also
192	optionally specify its scaling with a geometry string. Note you may need to
193	add quotes to avoid special shell interpretation of the C<;> in the
194	command-line; for more details see resource B<backgroundPixmap>.
195		157
196	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
197		159
198	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
199		161
…		…
244	italic> >> characters are to be printed. See resource B<boldItalicFont>	206	italic> >> characters are to be printed. See resource B<boldItalicFont>
245	for details.	207	for details.
246		208
247	=item B<-is>\|B<+is>	209	=item B<-is>\|B<+is>
248		210
249	Compile I<font-styles>: Bold/Italic font styles imply high intensity	211	Compile I<font-styles>: Bold/Blink font styles imply high intensity
250	foreground/background (default). See resource B<intensityStyles> for	212	foreground/background (default). See resource B<intensityStyles> for
251	details.	213	details.
252		214
253	=item B<-name> I<name>	215	=item B<-name> I<name>
254		216
…		…
258		220
259	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
260		222
261	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
262		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
263	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
264		230
265	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
266	B<utmpInhibit>.	232	B<utmpInhibit>.
267		233
…		…
271	B<visualBell>.	237	B<visualBell>.
272		238
273	=item B<-sb>\|B<+sb>	239	=item B<-sb>\|B<+sb>
274		240
275	Turn on/off scrollbar; resource B<scrollBar>.	241	Turn on/off scrollbar; resource B<scrollBar>.
		242
		243	=item B<-sr>\|B<+sr>
		244
		245	Put scrollbar on right/left; resource B<scrollBar_right>.
		246
		247	=item B<-st>\|B<+st>
		248
		249	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
		250	resource B<scrollBar_floating>.
276		251
277	=item B<-si>\|B<+si>	252	=item B<-si>\|B<+si>
278		253
279	Turn on/off scroll-to-bottom on TTY output inhibit; resource	254	Turn on/off scroll-to-bottom on TTY output inhibit; resource
280	B<scrollTtyOutput> has opposite effect.	255	B<scrollTtyOutput> has opposite effect.
…		…
287	=item B<-sw>\|B<+sw>	262	=item B<-sw>\|B<+sw>
288		263
289	Turn on/off scrolling with the scrollback buffer as new lines appear.	264	Turn on/off scrolling with the scrollback buffer as new lines appear.
290	This only takes effect if B<-si> is also given; resource	265	This only takes effect if B<-si> is also given; resource
291	B<scrollWithBuffer>.	266	B<scrollWithBuffer>.
292
293	=item B<-sr>\|B<+sr>
294
295	Put scrollbar on right/left; resource B<scrollBar_right>.
296
297	=item B<-st>\|B<+st>
298
299	Display rxvt (non XTerm/NeXT) scrollbar without/with a trough;
300	resource B<scrollBar_floating>.
301		267
302	=item B<-ptab>\|B<+ptab>	268	=item B<-ptab>\|B<+ptab>
303		269
304	If enabled (default), "Horizontal Tab" characters are being stored as	270	If enabled (default), "Horizontal Tab" characters are being stored as
305	actual wide characters in the screen buffer, which makes it possible to	271	actual wide characters in the screen buffer, which makes it possible to
…		…
309		275
310	=item B<-bc>\|B<+bc>	276	=item B<-bc>\|B<+bc>
311		277
312	Blink the cursor; resource B<cursorBlink>.	278	Blink the cursor; resource B<cursorBlink>.
313		279
		280	=item B<-uc>\|B<+uc>
		281
		282	Make the cursor underlined; resource B<cursorUnderline>.
		283
314	=item B<-iconic>	284	=item B<-iconic>
315		285
316	Start iconified, if the window manager supports that option.	286	Start iconified, if the window manager supports that option.
317	Alternative form is B<-ic>.	287	Alternative form is B<-ic>.
318		288
…		…
334		304
335	=item B<-bl>	305	=item B<-bl>
336		306
337	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	307	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
338	if honoured by the WM, the rxvt-unicode window will not have window	308	if honoured by the WM, the rxvt-unicode window will not have window
339	decorations; resource B<borderLess>.	309	decorations; resource B<borderLess>. If the window manager does not
		310	support MWM hints (e.g. kwin), enables override-redirect mode.
340		311
341	=item B<-override-redirect>	312	=item B<-override-redirect>
342		313
343	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
344	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
345		321
346	=item B<-sbg>	322	=item B<-sbg>
347		323
348	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
349	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
353	=item B<-lsp> I<number>	329	=item B<-lsp> I<number>
354		330
355	Compile I<frills>: Lines (pixel height) to insert between each row of	331	Compile I<frills>: Lines (pixel height) to insert between each row of
356	the display. Useful to work around font rendering problems; resource	332	the display. Useful to work around font rendering problems; resource
357	B<lineSpace>.	333	B<lineSpace>.
		334
		335	=item B<-letsp> I<number>
		336
		337	Compile I<frills>: Amount to adjust the computed character width by
		338	to control overall letter spacing. Negative values will tighten up the
		339	letter spacing, positive values will space letters out more. Useful to
		340	work around odd font metrics; resource B<letterSpace>.
358		341
359	=item B<-tn> I<termname>	342	=item B<-tn> I<termname>
360		343
361	This option specifies the name of the terminal type to be set in the	344	This option specifies the name of the terminal type to be set in the
362	B<TERM> environment variable. This terminal type must exist in the	345	B<TERM> environment variable. This terminal type must exist in the
…		…
397	=item B<-pt> I<style>	380	=item B<-pt> I<style>
398		381
399	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
400	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
401		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
402	=item B<-im> I<text>	388	=item B<-im> I<text>
403		389
404	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
405		391
406	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
417		403
418	=item B<-tcw>	404	=item B<-tcw>
419		405
420	Change the meaning of triple-click selection with the left mouse	406	Change the meaning of triple-click selection with the left mouse
421	button. Only effective when the original (non-perl) selection code is	407	button. Only effective when the original (non-perl) selection code is
422	in-use. Instead of selecting a full line it will extend the selection the	408	in-use. Instead of selecting a full line it will extend the selection to
423	end of the logical line only. resource B<tripleclickwords>.	409	the end of the logical line only. resource B<tripleclickwords>.
424		410
425	=item B<-insecure>	411	=item B<-insecure>
426		412
427	Enable "insecure" mode, which currently enables most of the escape	413	Enable "insecure" mode, which currently enables most of the escape
428	sequences that echo strings. See the resource B<insecure> for more	414	sequences that echo strings. See the resource B<insecure> for more
…		…
448		434
449	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	435	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
450	will not immediately destroy its window when the program executed within	436	will not immediately destroy its window when the program executed within
451	it exits. Instead, it will wait till it is being killed or closed by the	437	it exits. Instead, it will wait till it is being killed or closed by the
452	user; resource B<hold>.	438	user; resource B<hold>.
		439
		440	=item B<-cd> I<path>
		441
		442	Sets the working directory for the shell (or the command specified via
		443	B<-e>). The I<path> must be an absolute path and it must exist for
		444	@@RXVT_NAME@@ to start; resource B<chdir>.
		445
		446	=item B<-xrm> I<string>
		447
		448	Works like the X Toolkit option of the same name, by adding the I<string>
		449	as if it were specified in a resource file. Resource values specified this
		450	way take precedence over all other resource specifications.
		451
		452	Note that you need to use the I<same> syntax as in the .Xdefaults file,
		453	e.g. C<*.background: black>. Also note that all @@RXVT_NAME@@-specific
		454	options can be specified as long-options on the commandline, so use
		455	of B<-xrm> is mostly limited to cases where you want to specify other
		456	resources (e.g. for input methods) or for compatibility with other
		457	programs.
453		458
454	=item B<-keysym.>I<sym> I<string>	459	=item B<-keysym.>I<sym> I<string>
455		460
456	Remap a key symbol. See resource B<keysym>.	461	Remap a key symbol. See resource B<keysym>.
457		462
…		…
492	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	497	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
493	entries and will not tinker with pty/tty permissions - you have to do that	498	entries and will not tinker with pty/tty permissions - you have to do that
494	yourself if you want that.	499	yourself if you want that.
495		500
496	As an extremely special case, specifying C<-1> will completely suppress	501	As an extremely special case, specifying C<-1> will completely suppress
497	pty/tty operations.	502	pty/tty operations, which is probably only useful in conjunction with some
		503	perl extension that manages the terminal.
498		504
499	Here is a example in perl that illustrates how this option can be used (a	505	Here is a example in perl that illustrates how this option can be used (a
500	longer example is in F<doc/pty-fd>):	506	longer example is in F<doc/pty-fd>):
501		507
502	use IO::Pty;	508	use IO::Pty;
…		…
516	Comma-separated list of perl extension scripts to use (or not to use) in	522	Comma-separated list of perl extension scripts to use (or not to use) in
517	this terminal instance. See resource B<perl-ext> for details.	523	this terminal instance. See resource B<perl-ext> for details.
518		524
519	=back	525	=back
520		526
521	=head1 RESOURCES (available also as long-options)	527	=head1 RESOURCES
522		528
523	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	529	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
524	options) compiled into your version.	530	options) compiled into your version. All resources are also available as
		531	long-options.
525		532
526	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
527	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
528	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
529	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
530		537
531	1. system-wide app-defaults file, either locale-dependent OR global
532	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
533	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
534	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
535	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
		543	6. resources specified via -xrm on the commandline
536		544
537	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
538	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
539	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily	547	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
540	configured, while the class name B<URxvt> allows resources unique to	548	configured, while the class name B<URxvt> allows resources unique to
…		…
550	=item B<depth:> I<bitdepth>	558	=item B<depth:> I<bitdepth>
551		559
552	Compile I<xft>: Attempt to find a visual with the given bit depth;	560	Compile I<xft>: Attempt to find a visual with the given bit depth;
553	option B<-depth>.	561	option B<-depth>.
554		562
		563	=item B<buffered:> I<boolean>
		564
		565	Compile I<xft>: Turn on/off double-buffering for xft (default enabled).
		566	On some card/driver combination enabling it slightly decreases
		567	performance, on most it greatly helps it. The slowdown is small, so it
		568	should normally be enabled.
		569
555	=item B<geometry:> I<geom>	570	=item B<geometry:> I<geom>
556		571
557	Create the window with the specified X window geometry [default 80x24];	572	Create the window with the specified X window geometry [default 80x24];
558	option B<-geometry>.	573	option B<-geometry>.
559		574
…		…
572	Use the specified colour for the colour value I<n>, where 0-7	587	Use the specified colour for the colour value I<n>, where 0-7
573	corresponds to low-intensity (normal) colours and 8-15 corresponds to	588	corresponds to low-intensity (normal) colours and 8-15 corresponds to
574	high-intensity (bold = bright foreground, blink = bright background)	589	high-intensity (bold = bright foreground, blink = bright background)
575	colours. The canonical names are as follows: 0=black, 1=red, 2=green,	590	colours. The canonical names are as follows: 0=black, 1=red, 2=green,
576	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour	591	3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
577	names used are listed in the B<COLORS AND GRAPHICS> section.	592	names used are listed in the B<COLOURS AND GRAPHICS> section.
578		593
579	Colours higher than 15 cannot be set using resources (yet), but can be	594	Colours higher than 15 cannot be set using resources (yet), but can be
580	changed using an escape command (see @@RXVT_NAME@@(7)).	595	changed using an escape command (see @@RXVT_NAME@@(7)).
581		596
582	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with	597	Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
…		…
593	=item B<colorUL:> I<colour>	608	=item B<colorUL:> I<colour>
594		609
595	Use the specified colour to display underlined characters when the	610	Use the specified colour to display underlined characters when the
596	foreground colour is the default.	611	foreground colour is the default.
597		612
598	=item B<colorRV:> I<colour>
599
600	Use the specified colour as the background for reverse video characters
601	when OPTION_HC is disabled (--disable-frills).
602
603	=item B<underlineColor:> I<colour>	613	=item B<underlineColor:> I<colour>
604		614
605	If set, use the specified colour as the colour for the underline	615	If set, use the specified colour as the colour for the underline
606	itself. If unset, use the foreground colour.	616	itself. If unset, use the foreground colour.
		617
		618	=item B<highlightColor:> I<colour>
		619
		620	If set, use the specified colour as the background for highlighted
		621	characters. If unset, use reverse video.
		622
		623	=item B<highlightTextColor:> I<colour>
		624
		625	If set and highlightColor is set, use the specified colour as the
		626	foreground for highlighted characters.
607		627
608	=item B<cursorColor:> I<colour>	628	=item B<cursorColor:> I<colour>
609		629
610	Use the specified colour for the cursor. The default is to use the	630	Use the specified colour for the cursor. The default is to use the
611	foreground colour; option B<-cr>.	631	foreground colour; option B<-cr>.
…		…
618		638
619	=item B<reverseVideo:> I<boolean>	639	=item B<reverseVideo:> I<boolean>
620		640
621	B<True>: simulate reverse video by foreground and background colours;	641	B<True>: simulate reverse video by foreground and background colours;
622	option B<-rv>. B<False>: regular screen colours [default]; option	642	option B<-rv>. B<False>: regular screen colours [default]; option
623	B<+rv>. See note in B<COLORS AND GRAPHICS> section.	643	B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
624		644
625	=item B<jumpScroll:> I<boolean>	645	=item B<jumpScroll:> I<boolean>
626		646
627	B<True>: specify that jump scrolling should be used. When receiving lots	647	B<True>: specify that jump scrolling should be used. When receiving lots
628	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines	648	of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
…		…
642		662
643	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
644	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
645	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
646		666
647	=item B<inheritPixmap:> I<boolean>
648
649	B<True>: make the background inherit the parent windows' pixmap, giving
650	artificial transparency. B<False>: do not inherit the parent windows'
651	pixmap.
652
653	I<Please note that transparency of any kind if completely unsupported by
654	the author. Don't bug him with installation questions!>
655
656	=item B<fading:> I<number>	667	=item B<fading:> I<number>
657		668
658	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
659		670
660	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
661		672
662	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
663	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
664		675
665	=item B<tintColor:> I<colour>	676	=item B<iconFile:> I<file>
666		677
667	Tint the transparent background pixmap with the given colour; option	678	Set the application icon pixmap; option B<-icon>.
668	B<-tint>.
669
670	=item B<shading:> I<number>
671
672	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
673	in addition to tinting it; option B<-sh>.
674
675	=item B<blendType:> I<string>
676
677	Specify background blending type; option B<-blt>.
678
679	=item B<blurRadius:> I<number>
680
681	Apply Gaussian Blurr with the specified radius to the transparent
682	background image; option B<-blr>.
683		679
684	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
685		681
686	Use the specified colour for the scrollbar [default #B2B2B2].	682	Use the specified colour for the scrollbar [default #B2B2B2].
687		683
…		…
692		688
693	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
694		690
695	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
696	and the text.	692	and the text.
697
698	=item B<backgroundPixmap:> I<file[;geom]>
699
700	Use the specified image file for the background and also optionally
701	specify its scaling with a geometry string B<WxH+X+Y>,
702	in which B<"W" / "H"> specify the horizontal/vertical scale (percent),
703	and B<"X" / "Y"> locate the image centre (percent).
704	A scale of 0 displays the image with tiling. A scale of 1 displays the
705	image without any scaling. A scale of 2 to 9 specifies an integer
706	number of images in that direction. No image will be magnified beyond
707	10 times its original size. The maximum permitted scale is 1000.
708	Special string of B<"auto"> used as a geometry will cause image to be
709	automatically scaled to match window size.
710	If used in conjunction with B<-tr> option - specified pixmap will be
711	blended over transparency image using either alpha-blending, or any
712	other blending type, specified with B<-blt "type"> option.
713	[default 0x0+50+50]
714
715	=item B<path:> I<path>
716
717	Specify the colon-delimited search path for finding background image files.
718		693
719	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
720		695
721	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
722	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
745	it is named first) and thus defines the character cell grid to be 9 pixels	720	it is named first) and thus defines the character cell grid to be 9 pixels
746	wide and 15 pixels high.	721	wide and 15 pixels high.
747		722
748	The second font is just used to add additional unicode characters not in	723	The second font is just used to add additional unicode characters not in
749	the base font, likewise the third, which is unfortunately non-bold, but	724	the base font, likewise the third, which is unfortunately non-bold, but
750	the bold version of the font does contain less characters, so this is a	725	the bold version of the font does contain fewer characters, so this is a
751	useful supplement.	726	useful supplement.
752		727
753	The third font is an Xft font with aliasing turned off, and the characters	728	The third font is an Xft font with aliasing turned off, and the characters
754	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font	729	are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
755	contains other characters, but we are not interested in them.	730	contains other characters, but we are not interested in them.
…		…
779	text font will being used for the given style.	754	text font will being used for the given style.
780		755
781	=item B<intensityStyles:> I<boolean>	756	=item B<intensityStyles:> I<boolean>
782		757
783	When font styles are not enabled, or this option is enabled (B<True>,	758	When font styles are not enabled, or this option is enabled (B<True>,
784	option B<-is>, the default), bold and italic font styles imply high	759	option B<-is>, the default), bold/blink font styles imply high
785	intensity foreground/background colours. Disabling this option (B<False>,	760	intensity foreground/background colours. Disabling this option (B<False>,
786	option B<+is>) disables this behaviour, the high intensity colours are not	761	option B<+is>) disables this behaviour, the high intensity colours are not
787	reachable.	762	reachable.
788		763
789	=item B<selectstyle:> I<mode>
790
791	Set mouse selection style to B<old> which is 2.20, B<oldword> which
792	is xterm style with 2.20 old word selection, or anything else which
793	gives xterm style selection. Only effective when the original (non-perl)
794	selection code is in use.
795
796	=item B<scrollstyle:> I<mode>
797
798	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
799	the author's favourite.
800
801	=item B<title:> I<string>	764	=item B<title:> I<string>
802		765
803	Set window title string, the default title is the command-line	766	Set window title string, the default title is the command-line
804	specified after the B<-e> option, if any, otherwise the application	767	specified after the B<-e> option, if any, otherwise the application
805	name; option B<-title>.	768	name; option B<-title>.
…		…
818	=item B<urgentOnBell:> I<boolean>	781	=item B<urgentOnBell:> I<boolean>
819		782
820	B<True>: set the urgency hint for the wm on receipt of a bell character.	783	B<True>: set the urgency hint for the wm on receipt of a bell character.
821	B<False>: do not set the urgency hint [default].	784	B<False>: do not set the urgency hint [default].
822		785
		786	@@RXVT_NAME@@ resets the urgency hint on every focus change.
		787
823	=item B<visualBell:> I<boolean>	788	=item B<visualBell:> I<boolean>
824		789
825	B<True>: use visual bell on receipt of a bell character; option B<-vb>.	790	B<True>: use visual bell on receipt of a bell character; option B<-vb>.
826	B<False>: no visual bell [default]; option B<+vb>.	791	B<False>: no visual bell [default]; option B<+vb>.
827		792
…		…
829		794
830	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
831	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
832	[default]; option B<+ls>.	797	[default]; option B<+ls>.
833		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
834	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
835		805
836	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
837	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
838	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
850	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	820	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
851		821
852	This creates a new file in your home directory with the screen contents	822	This creates a new file in your home directory with the screen contents
853	every time you hit C<Print>.	823	every time you hit C<Print>.
854		824
		825	=item B<scrollstyle:> I<mode>
		826
		827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
		828	the author's favourite.
		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
855	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
856		835
857	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
858	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
859		838
…		…
878	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
879	B<+si>.	858	B<+si>.
880		859
881	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
882		861
883	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
884	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
885	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
886		866
887	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
888		868
889	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
890	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
891	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
892	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
893		873
894	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
895		875
896	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
897	resource is limited on most machines to 65535; option B<-sl>.
898		877
899	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
900		879
901	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
902	option B<-b>.	881	option B<-b>.
…		…
946	=item B<cursorBlink:> I<boolean>	925	=item B<cursorBlink:> I<boolean>
947		926
948	B<True>: blink the cursor. B<False>: do not blink the cursor [default];	927	B<True>: blink the cursor. B<False>: do not blink the cursor [default];
949	option B<-bc>.	928	option B<-bc>.
950		929
		930	=item B<cursorUnderline:> I<boolean>
		931
		932	B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
		933	option B<-uc>.
		934
951	=item B<pointerBlank:> I<boolean>	935	=item B<pointerBlank:> I<boolean>
952		936
953	B<True>: blank the pointer when a key is pressed or after a set number	937	B<True>: blank the pointer when a key is pressed or after a set number
954	of seconds of inactivity. B<False>: the pointer is always visible	938	of seconds of inactivity. B<False>: the pointer is always visible
955	[default].	939	[default].
…		…
960		944
961	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
962		946
963	Mouse pointer background colour.	947	Mouse pointer background colour.
964		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
965	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
966		956
967	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
968	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
969		959
970	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
971		961
972	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
973	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
974	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
975	escape sequence.	965	escape sequence.
976		966
977	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
978		968
…		…
991	will be created). In this mode, characters outside ISO-8859-1 can be used.	981	will be created). In this mode, characters outside ISO-8859-1 can be used.
992		982
993	When the selection extension is not used, only ISO-8859-1 characters can	983	When the selection extension is not used, only ISO-8859-1 characters can
994	be used. If not specified, the built-in default is used:	984	be used. If not specified, the built-in default is used:
995		985
996	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
997		987
998	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
999		989
1000	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1001		991
1002	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1003		993
1004	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1005		995
…		…
1057		1047
1058	=item B<secondaryScroll:> I<boolean>	1048	=item B<secondaryScroll:> I<boolean>
1059		1049
1060	Turn on/off secondary screen scroll (default enabled). If this	1050	Turn on/off secondary screen scroll (default enabled). If this
1061	option is enabled, scrolls on the secondary screen will change the	1051	option is enabled, scrolls on the secondary screen will change the
1062	scrollback buffer and switching to/from the secondary screen will	1052	scrollback buffer and, when secondaryScreen is off, switching
1063	instead scroll the screen up.	1053	to/from the secondary screen will instead scroll the screen up.
1064		1054
1065	=item B<hold>: I<boolean>	1055	=item B<hold>: I<boolean>
1066		1056
1067	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	1057	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
1068	will not immediately destroy its window when the program executed within	1058	will not immediately destroy its window when the program executed within
1069	it exits. Instead, it will wait till it is being killed or closed by the	1059	it exits. Instead, it will wait till it is being killed or closed by the
1070	user.	1060	user.
1071		1061
		1062	=item B<chdir>: I<path>
		1063
		1064	Sets the working directory for the shell (or the command specified via
		1065	B<-e>). The I<path> must be an absolute path and it must exist for
		1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
		1067	directory will be used; option B<-cd>.
		1068
1072	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1073		1070
1074	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1075	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1076		1073
1077	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1078	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1079	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1080	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1081	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1085	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1086	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1087	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1082		1088
1083	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1089	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1084	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1090	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1085	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1091	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1086	current application keymap mode state.	1092	current application keymap mode state.
1087		1093
1088	The spellings of I<key> can be obtained by using B<xev>(1) command or	1094	Due the the large number of modifier combinations, a key mapping will
1089	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1095	match if I<at least> the specified identifiers are being set, and no other
		1096	key mappings with those and more bits are being defined. That means that
		1097	defining a mapping for C<a> will automatically provide definitions for
		1098	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1099	themselves. See the C<builtin:> action, below, for a way to work around
		1100	this when this is a problem.
		1101
		1102	The spelling of I<key> depends on your implementation of X. An easy way to
		1103	find a key name is to use the B<xev>(1) command. You can find a list by
		1104	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1090	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1105	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1091	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1106	value (B<0x0000 - 0xFFFF>).
1092	performed in an exact manner; however, the closest match is assured.
1093		1107
1094	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1108	As with any resource value, the I<action> string may contain backslash
		1109	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1095	number), see RESOURCES in C<man 7 X> for futher details.	1110	number), see RESOURCES in C<man 7 X> for further details.
1096		1111
1097	You can define a range of keysyms in one shot by providing a I<string>	1112	An action starts with an action prefix that selects a certain type
1098	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1113	of action, followed by a colon. An action string without colons is
		1114	interpreted as a literal string to pass to the tty (as if it was
		1115	prefixed with C<string:>).
		1116
		1117	The following action prefixes are known - extensions can provide
		1118	additional prefixes:
		1119
		1120	=over 4
		1121
		1122	=item string:STRING
		1123
		1124	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1125	then the remaining C<STRING> will be passed to the program running in the
		1126	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1127	string C<echo rm -rf /> followed by a newline:
		1128
		1129	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1130
		1131	This could in theory be used to completely redefine your keymap.
		1132
		1133	In addition, for actions of this type, you can define a range of
		1134	keysyms in one shot by loading the C<keysym-list> perl extension and
		1135	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1099	should be a character not used by the strings.	1136	the delimiter `/' should be a character not used by the strings.
1100		1137
1101	Its usage can be demonstrated by an example:	1138	Its usage can be demonstrated by an example:
1102		1139
1103	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1140	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1104		1141
1105	The above line is equivalent to the following three lines:	1142	The above line is equivalent to the following three lines:
1106		1143
1107	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1144	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1108	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1145	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1109	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1146	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1110		1147
		1148	=item command:STRING
		1149
1111	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1150	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1112	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1151	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1152	the opposite of C<string:> - instead of sending it to the program running
		1153	in the terminal, it will be treated as if it were program output). This is
		1154	most useful to feed command sequences into @@RXVT_NAME@@.
		1155
1113	example the following means "change the current locale to C<zh_CN.GBK>	1156	For example the following means "change the current locale to C<zh_CN.GBK>
1114	when Control-Meta-c is being pressed":	1157	when Control-Meta-c is being pressed":
1115		1158
1116	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1159	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1117		1160
1118	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1161	The following example will map Control-Meta-1 and Control-Meta-2 to
1119	is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3)	1162	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1120	manpage. For example, the F<selection> extension (activated via	1163	font-switching at runtime:
1121	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1122		1164
1123	URxvt.keysym.M-C-c: perl:selection:rot13	1165	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1166	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1124		1167
1125	Due the the large number of modifier combinations, a defined key mapping	1168	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1126	will match if at I<at least> the specified identifiers are being set, and	1169	info):
1127	no other key mappings with those and more bits are being defined. That
1128	means that defining a key map for C<a> will automatically provide
1129	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1130	mappings themselves.
1131		1170
1132	Unfortunately, this will override built-in key mappings. For example	1171	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1172	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1173
		1174	=item builtin:
		1175
		1176	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1177	key binding existed for the key combination. The obvious use is to undo
		1178	the effect of existing bindings. The not so obvious use is to reinstate
		1179	bindings when another binding overrides too many modifiers.
		1180
1133	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1181	For example if you overwrite the C<Insert> key you will disable
1134	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1182	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1135	user-defined keymap using the C<builtin:> replacement:	1183	"holes" into the user-defined keymap using the C<builtin:> replacement:
1136		1184
1137	URxvt.keysym.Insert: <my insert key sequence>	1185	URxvt.keysym.Insert: <my insert key sequence>
1138	URxvt.keysym.S-Insert: builtin:	1186	URxvt.keysym.S-Insert: builtin:
1139		1187
1140	The first line defines a mapping for C<Insert> and I<any> combination	1188	The first line defines a mapping for C<Insert> and I<any> combination
1141	of modifiers. The second line re-establishes the default mapping for	1189	of modifiers. The second line re-establishes the default mapping for
1142	C<Shift-Insert>.	1190	C<Shift-Insert>.
1143		1191
1144	The following example will map Control-Meta-1 and Control-Meta-2 to	1192	=item builtin-string:
1145	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1146	font-switching at runtime:
1147		1193
1148	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1194	This action is mainly useful to restore string mappings for keys that
1149	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1195	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1196	difficult to explain - basically, this action will send the string to the
		1197	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1198	action for it.
1150		1199
1151	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1200	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1152	info):	1201	selection when you press C<Shift-Insert>. With the following bindings, it
		1202	would instead emit the (undocumented, but what applications running in the
		1203	terminal might expect) sequence C<ESC [ 2 $> instead:
1153		1204
1154	URxvt.keysym.M-C-3: command:\033[8;25;80t	1205	URxvt.keysym.S-Insert: builtin-string:
1155	URxvt.keysym.M-C-4: command:\033[8;48;110t	1206	URxvt.keysym.C-S-Insert: builtin:
		1207
		1208	The first line disables the paste functionality for that key
		1209	combination, and the second reinstates the default behaviour for
		1210	C<Control-Shift-Insert>, which would otherwise be overridden.
		1211
		1212	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1213	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1214	this:
		1215
		1216	URxvt.keysym.C-M-c: builtin-string:
		1217	URxvt.keysym.C-M-v: builtin-string:
		1218
		1219	=item EXTENSION:STRING
		1220
		1221	An action of this form invokes the action B<STRING>, if any, provided
		1222	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1223	be loaded automatically if necessary.
		1224
		1225	Not all extensions define actions, but popular extensions that do
		1226	include the I<selection> and I<matcher> extensions (documented in their
		1227	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1228	respectively).
		1229
		1230	From the silly examples department, this will rot13-"encrypt"
		1231	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1232	keyboards:
		1233
		1234	URxvt.keysym.M-C-c: selection:rot13
		1235
		1236	=item perl:STRING DEPRECATED
		1237
		1238	This is a deprecated way of invoking commands provided by perl
		1239	extensions. It is still supported, but should not be used anymore.
		1240
		1241	=back
1156		1242
1157	=item B<perl-ext-common>: I<string>	1243	=item B<perl-ext-common>: I<string>
1158		1244
1159	=item B<perl-ext>: I<string>	1245	=item B<perl-ext>: I<string>
1160		1246
…		…
1162	use in this terminal instance; option B<-pe>.	1248	use in this terminal instance; option B<-pe>.
1163		1249
1164	Extension names can be prefixed with a C<-> sign to prohibit using	1250	Extension names can be prefixed with a C<-> sign to prohibit using
1165	them. This can be useful to selectively disable some extensions loaded	1251	them. This can be useful to selectively disable some extensions loaded
1166	by default, or specified via the C<perl-ext-common> resource. For	1252	by default, or specified via the C<perl-ext-common> resource. For
1167	example, C<default,-selection> will use all the default extension except	1253	example, C<default,-selection> will use all the default extensions except
1168	C<selection>.	1254	C<selection>.
1169		1255
1170	Extension names can also be followed by an argument in angle brackets	1256	The default set includes the C<selection>, C<option-popup>,
1171	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1257	C<selection-popup>, C<readline> and C<searchable-scrollback>
1172	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1258	extensions, and extensions which are mentioned in B<keysym> resources.
1173	multiple times with different arguments will pass multiple arguments to	1259
1174	the extension.	1260	Any extension such that a corresponding resource is given on the
		1261	command line is automatically appended to B<perl-ext>.
1175		1262
1176	Each extension is looked up in the library directories, loaded if	1263	Each extension is looked up in the library directories, loaded if
1177	necessary, and bound to the current terminal instance.	1264	necessary, and bound to the current terminal instance. When the library
		1265	search path contains multiple extension files of the same name, then the
		1266	first one found will be used.
1178		1267
1179	If both of these resources are the empty string, then the perl	1268	If both of these resources are the empty string, then the perl interpreter
1180	interpreter will not be initialized. The idea behind two options is that	1269	will not be initialized. The rationale for having two options is that
1181	B<perl-ext-common> will be used for extensions that should be available to	1270	B<perl-ext-common> will be used for extensions that should be available to
1182	all instances, while B<perl-ext> is used for specific instances.	1271	all instances, while B<perl-ext> is used for specific instances.
1183		1272
1184	=item B<perl-eval>: I<string>	1273	=item B<perl-eval>: I<string>
1185		1274
1186	Perl code to be evaluated when all extensions have been registered. See	1275	Perl code to be evaluated when all extensions have been registered. See
1187	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource	1276	the @@RXVT_NAME@@perl(3) manpage.
1188	will be ignored when running setuid/setgid.
1189		1277
1190	=item B<perl-lib>: I<path>	1278	=item B<perl-lib>: I<path>
1191		1279
1192	Colon-separated list of additional directories that hold extension	1280	Colon-separated list of additional directories that hold extension
1193	scripts. When looking for extensions specified by the C<perl> resource,	1281	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1194	@@RXVT_NAME@@ will first look in these directories and then in	1282	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1195	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource	1283	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1196	will be ignored when running setuid/setgid.
1197		1284
1198	See the @@RXVT_NAME@@perl(3) manpage.	1285	See the @@RXVT_NAME@@perl(3) manpage.
1199		1286
1200	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1287	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1201		1288
…		…
1205	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1292	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1206		1293
1207	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1294	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1208	for details.	1295	for details.
1209		1296
1210	=item B<searchable-scrollback:> I<keysym>	1297	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1211		1298
1212	Sets the hotkey that starts the incremental scrollback buffer search	1299	This resource is deprecated and will be removed. Use a B<keysym> resource
1213	(default: C<M-s>).	1300	instead, e.g.:
1214		1301
		1302	URxvt.keysym.M-s: searchable-scrollback:start
		1303
1215	=item B<urlLauncher>: I<string>	1304	=item B<url-launcher>: I<string>
1216		1305
1217	Specifies the program to be started with a URL argument. Used by the	1306	Specifies the program to be started with a URL argument. Used by the
1218	C<selection-popup> and C<matcher> perl extensions.	1307	C<selection-popup> and C<matcher> perl extensions.
1219		1308
1220	=item B<transient-for>: I<windowid>	1309	=item B<transient-for>: I<windowid>
…		…
1223		1312
1224	=item B<override-redirect>: I<boolean>	1313	=item B<override-redirect>: I<boolean>
1225		1314
1226	Compile I<frills>: Sets override-redirect for the terminal window, making	1315	Compile I<frills>: Sets override-redirect for the terminal window, making
1227	it almost invisible to window managers; option B<-override-redirect>.	1316	it almost invisible to window managers; option B<-override-redirect>.
		1317
		1318	=item B<iso14755:> I<boolean>
		1319
		1320	Turn on/off ISO 14755 (default enabled).
1228		1321
1229	=item B<iso14755_52:> I<boolean>	1322	=item B<iso14755_52:> I<boolean>
1230		1323
1231	Turn on/off ISO 14755 5.2 mode (default enabled).	1324	Turn on/off ISO 14755 5.2 mode (default enabled).
1232		1325
…		…
1284	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1377	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1285	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1378	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1286		1379
1287	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1380	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1288	inserted too.	1381	inserted too.
		1382
		1383	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1384	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1385	binding causes the value of the internal selection to be copied to the
		1386	CLIPBOARD selection, while the second binding causes the value of the
		1387	CLIPBOARD selection to be inserted.
1289		1388
1290	=back	1389	=back
1291		1390
1292	=head1 CHANGING FONTS	1391	=head1 CHANGING FONTS
1293		1392
…		…
1375	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that	1474	B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1376	it can be seen via the I<who(1)> command, and can accept messages. To	1475	it can be seen via the I<who(1)> command, and can accept messages. To
1377	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root	1476	allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1378	on some systems or setgid to root or to some other group on others.	1477	on some systems or setgid to root or to some other group on others.
1379		1478
1380	=head1 COLORS AND GRAPHICS	1479	=head1 COLOURS AND GRAPHICS
1381		1480
1382	In addition to the default foreground and background colours,	1481	In addition to the default foreground and background colours,
1383	B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus	1482	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1384	high-intensity bold/blink versions of the same). Here is a list of the	1483	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1385	colours with their names.	1484	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
		1485	cube plus a 8 (24) colour greyscale ramp.
		1486
		1487	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1488	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1489	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1490	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1491	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1492	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1493	use many similar 24-bit colours. It's typically not a problem in common
		1494	scenarios.
		1495
		1496	Here is a list of the ANSI colours with their names.
1386		1497
1387	=begin table	1498	=begin table
1388		1499
1389	B<color0> (black) = Black	1500	B<color0> (black) = Black
1390	B<color1> (red) = Red3	1501	B<color1> (red) = Red3
…		…
1410	It is also possible to specify the colour values of B<foreground>,	1521	It is also possible to specify the colour values of B<foreground>,
1411	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as	1522	B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1412	a number 0-15, as a convenient shorthand to reference the colour name of	1523	a number 0-15, as a convenient shorthand to reference the colour name of
1413	color0-color15.	1524	color0-color15.
1414		1525
1415	In addition to the colours defined above, @@RXVT_NAME@@ offers an	1526	The following text gives values for the standard 88 colour mode (and
1416	additional 72 colours. The first 64 of those (with indices 16 to 79)	1527	values for the 256 colour mode in parentheses).
1417	consist of a 444 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
1418	16>), followed by 8 additional shades of gray (with indices 80 to 87).
1419		1528
		1529	The RGB cube uses indices 16..79 (16..231) using the following formulas:
		1530
		1531	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
		1532	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
		1533
		1534	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
		1535	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1536	the RGB cube.
		1537
1420	Together, all those colours implement the 88 colour xterm colours. Only	1538	Together, all those colours implement the 88 (256) colour xterm
1421	the first 16 can be changed using resources currently, the rest can only	1539	colours. Only the first 16 can be changed using resources currently, the
1422	be changed via command sequences ("escape codes").	1540	rest can only be changed via command sequences ("escape codes").
		1541
		1542	Applications are advised to use terminfo or command sequences to discover
		1543	number and RGB values of all colours (yes, you can query this...).
1423		1544
1424	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1545	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1425	always swapping the foreground/background colours. This is in contrast to	1546	always swapping the foreground/background colours. This is in contrast to
1426	I<xterm>(1) where the colours are only swapped if they have not otherwise	1547	I<xterm>(1) where the colours are only swapped if they have not otherwise
1427	been specified. For example,	1548	been specified. For example,
1428		1549
1429	=over 4
1430
1431	=item B<@@RXVT_NAME@@ -fg Black -bg White -rv>	1550	@@RXVT_NAME@@ -fg Black -bg White -rv
1432		1551
1433	would yield White on Black, while on I<xterm>(1) it would yield Black	1552	would yield White on Black, while on I<xterm>(1) it would yield Black on
1434	on White.	1553	White.
1435
1436	=back
1437		1554
1438	=head2 ALPHA CHANNEL SUPPORT	1555	=head2 ALPHA CHANNEL SUPPORT
1439		1556
1440	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1557	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1441	their act together, rxvt-unicode will support C<rgba:rrrr/gggg/bbbb/aaaa>	1558	their act together, rxvt-unicode will do its own alpha channel management:
1442	(recommended, but B<MUST> have 4 digits/component) colour specifications,	1559
1443	in addition to the ones provided by X, where the additional A component	1560	You can prefix any colour with an opaqueness percentage enclosed in
		1561	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
		1562	(0-100) that specifies the opacity of the colour, where C<0> is completely
		1563	transparent and C<100> is completely opaque. For example, C<[50]red> is a
		1564	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
		1565	is the recommended format to specify transparency values, and works with
		1566	all ways to specify a colour.
		1567
		1568	For complete control, rxvt-unicode also supports
		1569	C<rgba:rrrr/gggg/bbbb/aaaa> (exactly four hex digits/component) colour
		1570	specifications, where the additional C<aaaa> component specifies opacity
1444	specifies opacity (alpha) values. The minimum value of C<0> is completely	1571	(alpha) values. The minimum value of C<0000> is completely transparent,
1445	transparent). You can also prefix any color with C<[percent]>, where	1572	while C<ffff> is completely opaque). The two example colours from
1446	C<percent> is a decimal percentage (0-100) that specifies the opacity of	1573	earlier could also be specified as C<rgba:ff00/0000/0000/8000> and
1447	the color, where C<0> is completely transparent and C<100> is completelxy	1574	C<rgba:0000/ff00/0000/f332>.
1448	opaque.
1449		1575
1450	You probably need to specify B<"-depth 32">, too, and have the luck that	1576	You probably need to specify B<"-depth 32">, too, to force a visual with
1451	your X-server uses ARGB pixel layout, as X is far from just supporting	1577	alpha channels, and have the luck that your X-server uses ARGB pixel
1452	ARGB visuals out of the box, and rxvt-unicode just fudges around.	1578	layout, as X is far from just supporting ARGB visuals out of the box, and
		1579	rxvt-unicode just fudges around.
1453		1580
1454	For example, the following selects an almost completely transparent red	1581	For example, the following selects an almost completely transparent black
1455	background, and an almost opaque pink foreground:	1582	background, and an almost opaque pink foreground:
1456		1583
1457	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/aaaa -fg "[80]pink"	1584	@@RXVT_NAME@@ -depth 32 -bg rgba:0000/0000/0000/4444 -fg "[80]pink"
1458		1585
1459	I<Please note that transparency of any kind if completely unsupported by	1586	When not using a background image, then the interpretation of the
1460	the author. Don't bug him with installation questions!>	1587	alpha channel is up to your compositing manager (most interpret it as
		1588	transparency of course).
		1589
		1590	When using a background pixmap or pseudo-transparency, then the background
		1591	colour will always behave as if it were completely transparent (so the
		1592	background image shows instead), regardless of how it was specified, while
		1593	other colours will either be transparent as specified (the background
		1594	image will show through) on servers supporting the RENDER extension, or
		1595	fully opaque on servers not supporting the RENDER EXTENSION.
		1596
		1597	Please note that due to bugs in Xft, specifying alpha values might result
		1598	in garbage being displayed when the X-server does not support the RENDER
		1599	extension.
1461		1600
1462	=head1 ENVIRONMENT	1601	=head1 ENVIRONMENT
1463		1602
1464	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:	1603	B<@@RXVT_NAME@@> sets and/or uses the following environment variables:
1465		1604
…		…
1471	resources or on the command line.	1610	resources or on the command line.
1472		1611
1473	=item B<COLORTERM>	1612	=item B<COLORTERM>
1474		1613
1475	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was	1614	Either C<rxvt>, C<rxvt-xpm>, depending on whether @@RXVT_NAME@@ was
1476	compiled with background image support, and optionally with the added	1615	compiled with background image support, and optionally with the added
1477	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome	1616	extension C<-mono> to indicate that rxvt-unicode runs on a monochrome
1478	screen.	1617	screen.
1479		1618
1480	=item B<COLORFGBG>	1619	=item B<COLORFGBG>
1481		1620
1482	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is	1621	Set to a string of the form C<fg;bg> or C<fg;xpm;bg>, where C<fg> is
1483	the colour code used as default foreground/text colour (or the string	1622	the colour code used as default foreground/text colour (or the string
1484	C<default> to indicate that the default-colour escape sequence is to be	1623	C<default> to indicate that the default-colour escape sequence is to be
1485	used), C<bg> is the colour code used as default background colour (or the	1624	used), C<bg> is the colour code used as default background colour (or the
1486	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@	1625	string C<default>), and C<xpm> is the string C<default> if @@RXVT_NAME@@
1487	was compiled with background image support. Libraries like C<ncurses>	1626	was compiled with background image support. Libraries like C<ncurses>
1488	and C<slang> can (and do) use this information to optimize screen output.	1627	and C<slang> can (and do) use this information to optimize screen output.
1489		1628
1490	=item B<WINDOWID>	1629	=item B<WINDOWID>
1491		1630
1492	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel	1631	Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel
…		…
1499	C<--with-terminfo=PATH>.	1638	C<--with-terminfo=PATH>.
1500		1639
1501	=item B<DISPLAY>	1640	=item B<DISPLAY>
1502		1641
1503	Used by @@RXVT_NAME@@ to connect to the display and set to the correct	1642	Used by @@RXVT_NAME@@ to connect to the display and set to the correct
1504	display in its child processes.	1643	display in its child processes if C<-display> isn't used to override. It
		1644	defaults to C<:0> if it doesn't exist.
1505		1645
1506	=item B<SHELL>	1646	=item B<SHELL>
1507		1647
1508	The shell to be used for command execution, defaults to C</bin/sh>.	1648	The shell to be used for command execution, defaults to C</bin/sh>.
1509		1649
1510	=item B<RXVT_SOCKET>	1650	=item B<RXVT_SOCKET> [I<sic>]
1511		1651
1512	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1652	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1513	@@RXVT_NAME@@d(1).	1653	@@RXVT_NAME@@d(1).
1514		1654
1515	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1655	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1656
		1657	=item B<URXVT_PERL_LIB>
		1658
		1659	Additional F<:>-separated library search path for perl extensions. Will be
		1660	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1661	directory.
		1662
		1663	=item B<URXVT_PERL_VERBOSITY>
		1664
		1665	See L<@@RXVT_NAME@@perl>(3).
1516		1666
1517	=item B<HOME>	1667	=item B<HOME>
1518		1668
1519	Used to locate the default directory for the unix domain socket for	1669	Used to locate the default directory for the unix domain socket for
1520	daemon communications and to locate various resource files (such as	1670	daemon communications and to locate various resource files (such as
1521	C<.Xdefaults>)	1671	C<.Xdefaults>)
1522		1672
1523	=item B<XAPPLRESDIR>	1673	=item B<XAPPLRESDIR>
1524		1674
1525	Directory where various X resource files are being located.	1675	Directory where application-specific X resource files are located.
1526		1676
1527	=item B<XENVIRONMENT>	1677	=item B<XENVIRONMENT>
1528		1678
1529	If set and accessible, gives the name of a X resource file to be loaded by	1679	If set and accessible, gives the name of a X resource file to be loaded by
1530	@@RXVT_NAME@@.	1680	@@RXVT_NAME@@.
…		…
1535		1685
1536	=over 4	1686	=over 4
1537		1687
1538	=item B</usr/lib/X11/rgb.txt>	1688	=item B</usr/lib/X11/rgb.txt>
1539		1689
1540	Color names.	1690	Colour names.
1541		1691
1542	=back	1692	=back
1543		1693
1544	=head1 SEE ALSO	1694	=head1 SEE ALSO
1545		1695
		1696	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1546	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1697	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1547		1698
1548	=head1 CURRENT PROJECT COORDINATOR	1699	=head1 CURRENT PROJECT COORDINATOR
1549		1700
1550	=over 4	1701	=over 4
1551		1702
1552	=item Project Coordinator	1703	=item Project Coordinator
1553		1704
1554	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1705	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1555		1706
1556	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1707	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1557		1708
1558	=back	1709	=back
1559		1710
…		…
1563		1714
1564	=item John Bovey	1715	=item John Bovey
1565		1716
1566	University of Kent, 1992, wrote the original Xvt.	1717	University of Kent, 1992, wrote the original Xvt.
1567		1718
1568	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1719	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1569		1720
1570	very heavily modified Xvt and came up with Rxvt	1721	very heavily modified Xvt and came up with Rxvt
1571		1722
1572	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1723	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1573		1724
1574	wrote the Greek Keyboard Input (no longer in code)	1725	wrote the Greek Keyboard Input (no longer in code)
1575		1726
1576	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1727	=item mj olesen <olesen@me.QueensU.CA>
1577		1728
1578	Wrote the menu system.	1729	Wrote the menu system.
1579		1730
1580	Project Coordinator (changes.txt 2.11 to 2.21)	1731	Project Coordinator (changes.txt 2.11 to 2.21)
1581		1732
1582	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1733	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1583		1734
1584	Project Coordinator (changes.txt 2.21a to 2.4.5)	1735	Project Coordinator (changes.txt 2.21a to 2.4.5)
1585		1736
1586	=item Geoff Wing L<< <gcw@pobox.com> >>	1737	=item Geoff Wing <gcw@pobox.com>
1587		1738
1588	Rewrote screen display and text selection routines.	1739	Rewrote screen display and text selection routines.
1589		1740
1590	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1741	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1591		1742
1592	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1743	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1593		1744
1594	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1745	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1595	extension, random hacks, numerous bugfixes and extensions.	1746	extension, random hacks, numerous bugfixes and extensions.
1596		1747
1597	Project Coordinator (Changes 1.0 -)	1748	Project Coordinator (Changes 1.0 -)
1598		1749
1599	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1750	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1600		1751
1601	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1752	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1602		1753
1603	=back	1754	=back
1604		1755

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.141 by sasha, Mon Oct 29 13:40:41 2007 UTC vs. Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.141 by sasha, Mon Oct 29 13:40:41 2007 UTC vs.
Revision 1.247 by sf-exg, Thu Jul 14 05:33:25 2016 UTC