ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.1.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.166 by root, Fri Oct 10 13:23:56 2008 UTC vs.
Revision 1.232 by root, Sun May 18 18:19:10 2014 UTC

… …
98is still respected. but deprecated). In the absence of this option, the 98is still respected. but deprecated). In the absence of this option, the
99display specified by the B<DISPLAY> environment variable is used. 99display specified by the B<DISPLAY> environment variable is used.
100 100
101=item B<-depth> I<bitdepth> 101=item B<-depth> I<bitdepth>
102 102
103Compile I<xft>: Attempt to find a visual with the given bit depth; 103Compile I<frills>: Attempt to find a visual with the given bit depth;
104resource B<depth>. 104resource B<depth>.
105 105
106[Please note that many X servers (and libXft) are buggy with 106[Please note that many X servers (and libXft) are buggy with
107respect to C<-depth 32> and/or alpha channels, and will cause all sorts 107respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108of graphical corruption. This is harmless, but we can't do anything about 108of graphical corruption. This is harmless, but we can't do anything about
109this, so watch out] 109this, so watch out]
110 110
111=item B<-visual> I<visualID>
112
113Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for possible
114visual ids).
115
111=item B<-geometry> I<geom> 116=item B<-geometry> I<geom>
112 117
113Window geometry (B<-g> still respected); resource B<geometry>. 118Window geometry (B<-g> still respected); resource B<geometry>.
114 119
115=item B<-rv>|B<+rv> 120=item B<-rv>|B<+rv>
… …
121Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>. 126Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122 127
123=item B<-ss>|B<+ss> 128=item B<-ss>|B<+ss>
124 129
125Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>. 130Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127=item B<-tr>|B<+tr>
128
129Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131B<-ip> is still accepted as an obsolete alias but will be removed in
132future versions.
133
134I<Please address all transparency related issues to Sasha Vasko at
135sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136 131
137=item B<-fade> I<number> 132=item B<-fade> I<number>
138 133
139Fade the text by the given percentage when focus is lost. Small values 134Fade the text by the given percentage when focus is lost. Small values
140fade a little only, 100 completely replaces all colours by the fade 135fade a little only, 100 completely replaces all colours by the fade
… …
143=item B<-fadecolor> I<colour> 138=item B<-fadecolor> I<colour>
144 139
145Fade to this colour when fading is used (see B<-fade>). The default colour 140Fade to this colour when fading is used (see B<-fade>). The default colour
146is opaque black. resource B<fadeColor>. 141is opaque black. resource B<fadeColor>.
147 142
148=item B<-tint> I<colour> 143=item B<-icon> I<file>
149 144
150Tint the transparent background pixmap with the given colour when 145Compile I<pixbuf>: Use the specified image as application icon. This
151transparency is enabled with B<-tr>. This only works for 146is used by many window managers, taskbars and pagers to represent the
152non-tiled backgrounds, currently. See also the B<-sh> option that can be 147application window; resource I<iconFile>.
153used to brighten or darken the image in addition to tinting it.
154Please note that certain tint colours can be applied on the server-side,
155thus yielding performance gain of two orders of magnitude. These colours are:
156blue, red, green, cyan, magenta, yellow, and those close to them. Also
157pure black and pure white colors essentially mean no tinting; resource
158I<tintColor>. Example:
159
160 @@RXVT_NAME@@ -tr -tint blue -sh 40
161
162=item B<-sh> I<number>
163
164Darken (0 .. 100) or lighten (100 .. 200) the transparent
165background image in addition to (or instead of) tinting it;
166resource I<shading>.
167
168=item B<-blt> I<string>
169
170Specify background blending type. If background pixmap is specified
171at the same time as transparency - such pixmap will be blended over
172transparency image, using method specified. Supported values are :
173B<add>, B<alphablend>, B<allanon> - color values averaging, B<colorize>,
174B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178=item B<-blr> I<HxV>
179
180Apply Gaussian Blur with the specified radii to the transparent
181background image. If single number is specified - both vertical and
182horizontal radii are considered to be the same. Setting one of the
183radii to 1 and another to a large number creates interesting effects
184on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185resource I<blurRadius>.
186 148
187=item B<-bg> I<colour> 149=item B<-bg> I<colour>
188 150
189Window background colour; resource B<background>. 151Window background colour; resource B<background>.
190 152
191=item B<-fg> I<colour> 153=item B<-fg> I<colour>
192 154
193Window foreground colour; resource B<foreground>. 155Window foreground colour; resource B<foreground>.
194
195=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
196
197Compile I<afterimage>: Specify image file for the background and also
198optionally specify its scaling with a geometry string. Note you may need to
199add quotes to avoid special shell interpretation of the C<;> in the
200command-line; for more details see resource B<backgroundPixmap>.
201 156
202=item B<-cr> I<colour> 157=item B<-cr> I<colour>
203 158
204The cursor colour; resource B<cursorColor>. 159The cursor colour; resource B<cursorColor>.
205 160
… …
315 270
316=item B<-bc>|B<+bc> 271=item B<-bc>|B<+bc>
317 272
318Blink the cursor; resource B<cursorBlink>. 273Blink the cursor; resource B<cursorBlink>.
319 274
275=item B<-uc>|B<+uc>
276
277Make the cursor underlined; resource B<cursorUnderline>.
278
320=item B<-iconic> 279=item B<-iconic>
321 280
322Start iconified, if the window manager supports that option. 281Start iconified, if the window manager supports that option.
323Alternative form is B<-ic>. 282Alternative form is B<-ic>.
324 283
… …
360=item B<-lsp> I<number> 319=item B<-lsp> I<number>
361 320
362Compile I<frills>: Lines (pixel height) to insert between each row of 321Compile I<frills>: Lines (pixel height) to insert between each row of
363the display. Useful to work around font rendering problems; resource 322the display. Useful to work around font rendering problems; resource
364B<lineSpace>. 323B<lineSpace>.
324
325=item B<-letsp> I<number>
326
327Compile I<frills>: Amount to adjust the computed character width by
328to control overall letter spacing. Negative values will tighten up the
329letter spacing, positive values will space letters out more. Useful to
330work around odd font metrics; resource B<letterSpace>.
365 331
366=item B<-tn> I<termname> 332=item B<-tn> I<termname>
367 333
368This option specifies the name of the terminal type to be set in the 334This option specifies the name of the terminal type to be set in the
369B<TERM> environment variable. This terminal type must exist in the 335B<TERM> environment variable. This terminal type must exist in the
… …
554You can set and change the resources using X11 tools like B<xrdb>. Many 520You can set and change the resources using X11 tools like B<xrdb>. Many
555distribution do also load settings from the B<~/.Xresources> file when X 521distribution do also load settings from the B<~/.Xresources> file when X
556starts. @@RXVT_NAME@@ will consult the following files/resources in order, 522starts. @@RXVT_NAME@@ will consult the following files/resources in order,
557with later settings overwriting earlier ones: 523with later settings overwriting earlier ones:
558 524
559 1. system-wide app-defaults file, either locale-dependent OR global
560 2. app-defaults file in $XAPPLRESDIR 525 1. app-defaults file in $XAPPLRESDIR
526 2. $HOME/.Xdefaults
561 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults 527 3. RESOURCE_MANAGER property on root-window of screen 0
562 4. SCREEN_RESOURCES for the current screen 528 4. SCREEN_RESOURCES property on root-window of the current screen
563 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename> 529 5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
564 6. resources specified via -xrm on the commandline 530 6. resources specified via -xrm on the commandline
565 531
566Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class 532Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
567names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources 533names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
… …
608Use the specified colour for the colour value I<n>, where 0-7 574Use the specified colour for the colour value I<n>, where 0-7
609corresponds to low-intensity (normal) colours and 8-15 corresponds to 575corresponds to low-intensity (normal) colours and 8-15 corresponds to
610high-intensity (bold = bright foreground, blink = bright background) 576high-intensity (bold = bright foreground, blink = bright background)
611colours. The canonical names are as follows: 0=black, 1=red, 2=green, 577colours. The canonical names are as follows: 0=black, 1=red, 2=green,
6123=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour 5783=yellow, 4=blue, 5=magenta, 6=cyan, 7=white, but the actual colour
613names used are listed in the B<COLORS AND GRAPHICS> section. 579names used are listed in the B<COLOURS AND GRAPHICS> section.
614 580
615Colours higher than 15 cannot be set using resources (yet), but can be 581Colours higher than 15 cannot be set using resources (yet), but can be
616changed using an escape command (see @@RXVT_NAME@@(7)). 582changed using an escape command (see @@RXVT_NAME@@(7)).
617 583
618Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with 584Colours 16-79 form a standard 4x4x4 colour cube (the same as xterm with
… …
629=item B<colorUL:> I<colour> 595=item B<colorUL:> I<colour>
630 596
631Use the specified colour to display underlined characters when the 597Use the specified colour to display underlined characters when the
632foreground colour is the default. 598foreground colour is the default.
633 599
634=item B<colorRV:> I<colour>
635
636Use the specified colour as the background for reverse video characters
637when OPTION_HC is disabled (--disable-frills).
638
639=item B<underlineColor:> I<colour> 600=item B<underlineColor:> I<colour>
640 601
641If set, use the specified colour as the colour for the underline 602If set, use the specified colour as the colour for the underline
642itself. If unset, use the foreground colour. 603itself. If unset, use the foreground colour.
604
605=item B<highlightColor:> I<colour>
606
607If set, use the specified colour as the background for highlighted
608characters. If unset, use reverse video.
609
610=item B<highlightTextColor:> I<colour>
611
612If set and highlightColor is set, use the specified colour as the
613foreground for highlighted characters.
643 614
644=item B<cursorColor:> I<colour> 615=item B<cursorColor:> I<colour>
645 616
646Use the specified colour for the cursor. The default is to use the 617Use the specified colour for the cursor. The default is to use the
647foreground colour; option B<-cr>. 618foreground colour; option B<-cr>.
… …
654 625
655=item B<reverseVideo:> I<boolean> 626=item B<reverseVideo:> I<boolean>
656 627
657B<True>: simulate reverse video by foreground and background colours; 628B<True>: simulate reverse video by foreground and background colours;
658option B<-rv>. B<False>: regular screen colours [default]; option 629option B<-rv>. B<False>: regular screen colours [default]; option
659B<+rv>. See note in B<COLORS AND GRAPHICS> section. 630B<+rv>. See note in B<COLOURS AND GRAPHICS> section.
660 631
661=item B<jumpScroll:> I<boolean> 632=item B<jumpScroll:> I<boolean>
662 633
663B<True>: specify that jump scrolling should be used. When receiving lots 634B<True>: specify that jump scrolling should be used. When receiving lots
664of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines 635of lines, @@RXVT_NAME@@ will only scroll once a whole screen height of lines
… …
678 649
679B<False>: specify that everything is to be displayed, even 650B<False>: specify that everything is to be displayed, even
680if the refresh is too fast for the human eye to read anything (or the 651if the refresh is too fast for the human eye to read anything (or the
681monitor to display anything); option B<+ss>. 652monitor to display anything); option B<+ss>.
682 653
683=item B<transparent:> I<boolean>
684
685Turn on/off illusion of a transparent window background.
686
687B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
688future versions.
689
690I<Please address all transparency related issues to Sasha Vasko at
691sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
692
693=item B<fading:> I<number> 654=item B<fading:> I<number>
694 655
695Fade the text by the given percentage when focus is lost; option B<-fade>. 656Fade the text by the given percentage when focus is lost; option B<-fade>.
696 657
697=item B<fadeColor:> I<colour> 658=item B<fadeColor:> I<colour>
698 659
699Fade to this colour, when fading is used (see B<fading:>). The default 660Fade to this colour, when fading is used (see B<fading:>). The default
700colour is black; option B<-fadecolor>. 661colour is black; option B<-fadecolor>.
701 662
702=item B<tintColor:> I<colour> 663=item B<iconFile:> I<file>
703 664
704Tint the transparent background pixmap with the given colour; option 665Set the application icon pixmap; option B<-icon>.
705B<-tint>.
706
707=item B<shading:> I<number>
708
709Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
710in addition to tinting it; option B<-sh>.
711
712=item B<blendType:> I<string>
713
714Specify background blending type; option B<-blt>.
715
716=item B<blurRadius:> I<number>
717
718Apply Gaussian Blurr with the specified radius to the transparent
719background image; option B<-blr>.
720 666
721=item B<scrollColor:> I<colour> 667=item B<scrollColor:> I<colour>
722 668
723Use the specified colour for the scrollbar [default #B2B2B2]. 669Use the specified colour for the scrollbar [default #B2B2B2].
724 670
… …
729 675
730=item B<borderColor:> I<colour> 676=item B<borderColor:> I<colour>
731 677
732The colour of the border around the text area and between the scrollbar 678The colour of the border around the text area and between the scrollbar
733and the text. 679and the text.
734
735=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
736
737Use the specified image file for the background and also
738optionally specify its scaling with a geometry string B<WxH+X+Y>,
739(default C<0x0+50+50>) in which B<"W" / "H"> specify the
740horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
741centre (percent). A scale of 0 displays the image with tiling. A scale
742of 1 displays the image without any scaling. A scale of 2 to 9 specifies
743an integer number of images in that direction. No image will be magnified
744beyond 10 times its original size. The maximum permitted scale is 1000.
745Additional operations can be specified after colon B<:op1:op2...>.
746Supported operations are:
747
748 tile force background image to be tiled and not scaled. Equivalent to 0x0
749 propscale will scale image keeping proportions
750 auto will scale image to match window size. Equivalent to 100x100
751 hscale will scale image horizontally to the window size
752 vscale will scale image vertically to the window size
753 scale will scale image to match window size
754 root will tile image as if it was a root window background, auto-adjusting
755 whenever terminal window moves
756
757If used in conjunction with B<-tr> option, the specified pixmap will be
758blended over transparency image using either alpha-blending, or any
759other blending type, specified with B<-blt "type"> option.
760
761=item B<path:> I<path>
762
763Specify the colon-delimited search path for finding background image files.
764 680
765=item B<font:> I<fontlist> 681=item B<font:> I<fontlist>
766 682
767Select the fonts to be used. This is a comma separated list of font names 683Select the fonts to be used. This is a comma separated list of font names
768that are checked in order when trying to find glyphs for characters. The 684that are checked in order when trying to find glyphs for characters. The
… …
791it is named first) and thus defines the character cell grid to be 9 pixels 707it is named first) and thus defines the character cell grid to be 9 pixels
792wide and 15 pixels high. 708wide and 15 pixels high.
793 709
794The second font is just used to add additional unicode characters not in 710The second font is just used to add additional unicode characters not in
795the base font, likewise the third, which is unfortunately non-bold, but 711the base font, likewise the third, which is unfortunately non-bold, but
796the bold version of the font does contain less characters, so this is a 712the bold version of the font does contain fewer characters, so this is a
797useful supplement. 713useful supplement.
798 714
799The third font is an Xft font with aliasing turned off, and the characters 715The third font is an Xft font with aliasing turned off, and the characters
800are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font 716are limited to the B<JIS 0208> codeset (i.e. japanese kanji). The font
801contains other characters, but we are not interested in them. 717contains other characters, but we are not interested in them.
… …
852=item B<urgentOnBell:> I<boolean> 768=item B<urgentOnBell:> I<boolean>
853 769
854B<True>: set the urgency hint for the wm on receipt of a bell character. 770B<True>: set the urgency hint for the wm on receipt of a bell character.
855B<False>: do not set the urgency hint [default]. 771B<False>: do not set the urgency hint [default].
856 772
773@@RXVT_NAME@@ resets the urgency hint on every focus change.
774
857=item B<visualBell:> I<boolean> 775=item B<visualBell:> I<boolean>
858 776
859B<True>: use visual bell on receipt of a bell character; option B<-vb>. 777B<True>: use visual bell on receipt of a bell character; option B<-vb>.
860B<False>: no visual bell [default]; option B<+vb>. 778B<False>: no visual bell [default]; option B<+vb>.
861 779
… …
889=item B<scrollstyle:> I<mode> 807=item B<scrollstyle:> I<mode>
890 808
891Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is 809Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
892the author's favourite. 810the author's favourite.
893 811
812=item B<thickness:> I<number>
813
814Set the scrollbar width in pixels.
815
894=item B<scrollBar:> I<boolean> 816=item B<scrollBar:> I<boolean>
895 817
896B<True>: enable the scrollbar [default]; option B<-sb>. B<False>: 818B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
897disable the scrollbar; option B<+sb>. 819disable the scrollbar; option B<+sb>.
898 820
… …
917B<False>: do not scroll to bottom when tty receives output; option 839B<False>: do not scroll to bottom when tty receives output; option
918B<+si>. 840B<+si>.
919 841
920=item B<scrollWithBuffer:> I<boolean> 842=item B<scrollWithBuffer:> I<boolean>
921 843
922B<True>: scroll with scrollback buffer when tty receives new lines (and 844B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
923B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll 845try to show the same lines) and B<scrollTtyOutput> is False; option
924with scrollback buffer when tty receives new lines; option B<+sw>. 846B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
847new lines; option B<+sw>.
925 848
926=item B<scrollTtyKeypress:> I<boolean> 849=item B<scrollTtyKeypress:> I<boolean>
927 850
928B<True>: scroll to bottom when a non-special key is pressed. Special keys 851B<True>: scroll to bottom when a non-special key is pressed. Special keys
929are those which are intercepted by rxvt-unicode for special handling and 852are those which are intercepted by rxvt-unicode for special handling and
… …
985=item B<cursorBlink:> I<boolean> 908=item B<cursorBlink:> I<boolean>
986 909
987B<True>: blink the cursor. B<False>: do not blink the cursor [default]; 910B<True>: blink the cursor. B<False>: do not blink the cursor [default];
988option B<-bc>. 911option B<-bc>.
989 912
913=item B<cursorUnderline:> I<boolean>
914
915B<True>: Make the cursor underlined. B<False>: Make the cursor a box [default];
916option B<-uc>.
917
990=item B<pointerBlank:> I<boolean> 918=item B<pointerBlank:> I<boolean>
991 919
992B<True>: blank the pointer when a key is pressed or after a set number 920B<True>: blank the pointer when a key is pressed or after a set number
993of seconds of inactivity. B<False>: the pointer is always visible 921of seconds of inactivity. B<False>: the pointer is always visible
994[default]. 922[default].
… …
1007large number (e.g. C<987654321>) to effectively disable the timeout. 935large number (e.g. C<987654321>) to effectively disable the timeout.
1008 936
1009=item B<backspacekey:> I<string> 937=item B<backspacekey:> I<string>
1010 938
1011The string to send when the backspace key is pressed. If set to B<DEC> 939The string to send when the backspace key is pressed. If set to B<DEC>
1012or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace> 940or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1013(code 8) - which can be reversed with the appropriate DEC private mode 941(code 8) - which can be reversed with the appropriate DEC private mode
1014escape sequence. 942escape sequence.
1015 943
1016=item B<deletekey:> I<string> 944=item B<deletekey:> I<string>
1017 945
… …
1113Sets the working directory for the shell (or the command specified via 1041Sets the working directory for the shell (or the command specified via
1114B<-e>). The I<path> must be an absolute path and it must exist for 1042B<-e>). The I<path> must be an absolute path and it must exist for
1115@@RXVT_NAME@@ to start. If it isn't specified then the current working 1043@@RXVT_NAME@@ to start. If it isn't specified then the current working
1116directory will be used; option B<-cd>. 1044directory will be used; option B<-cd>.
1117 1045
1118=item B<keysym.>I<sym>: I<string> 1046=item B<keysym.>I<sym>: I<action>
1119 1047
1120Compile I<frills>: Associate I<string> with keysym I<sym>. The 1048Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1121intervening resource name B<keysym.> cannot be omitted. 1049resource name B<keysym.> cannot be omitted.
1122 1050
1123The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be 1051Using this resource, you can map key combinations such as
1124any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>, 1052C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1125B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>, 1053string than would normally result from that combination, making the
1126and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>, 1054terminal scroll up or down the way you want it, or any other thing an
1127B<2>, B<3>, B<4>, B<5>. 1055extension might provide.
1056
1057The key combination that triggers the action, I<sym>, has the following format:
1058
1059 (modifiers-)key
1060
1061Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
1062B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
1063B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
1064B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1128 1065
1129The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to 1066The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1130whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr 1067whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1131keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the 1068keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1132current application keymap mode state. 1069current application keymap mode state.
1133 1070
1134The spellings of I<key> can be obtained by using B<xev>(1) command or 1071Due the the large number of modifier combinations, a key mapping will
1135searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and 1072match if I<at least> the specified identifiers are being set, and no other
1073key mappings with those and more bits are being defined. That means that
1074defining a mapping for C<a> will automatically provide definitions for
1075C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
1076themselves. See the C<builtin:> action, below, for a way to work around
1077this when this is a problem.
1078
1079The spelling of I<key> depends on your implementation of X. An easy way to
1080find a key name is to use the B<xev>(1) command. You can find a list by
1081looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1136omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex 1082the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1137keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not 1083value (B<0x0000 - 0xFFFF>).
1138performed in an exact manner; however, the closest match is assured.
1139 1084
1140I<string> may contain escape values (C<\n>: newline, C<\000>: octal 1085As with any resource value, the I<action> string may contain backslash
1086escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1141number), see RESOURCES in C<man 7 X> for futher details. 1087number), see RESOURCES in C<man 7 X> for further details.
1142 1088
1143You can define a range of keysyms in one shot by providing a I<string> 1089An action starts with an action prefix that selects a certain type
1144with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/' 1090of action, followed by a colon. An action strings without colons is
1145should be a character not used by the strings. 1091interpreted as a literal string to pass to the tty (as if they were
1092prefixed with C<string:>).
1146 1093
1147Its usage can be demonstrated by an example: 1094The following action prefixes are known - extensions can provide
1095additional prefixes:
1148 1096
1149 URxvt.keysym.M-C-0x61: list|\033<M-C-|abc|> 1097=over 4
1150 1098
1151The above line is equivalent to the following three lines: 1099=item string:STRING
1152 1100
1153 URxvt.keysym.Meta-Control-0x61: \033<M-C-a> 1101If the I<action> starts with C<string:> (or otherwise contains no colons),
1154 URxvt.keysym.Meta-Control-0x62: \033<M-C-b> 1102then the remaining C<STRING> will be passed to the program running in the
1155 URxvt.keysym.Meta-Control-0x63: \033<M-C-c> 1103terminal. For example, you could replace whatever Shift-Tab outputs by the
1104string C<echo rm -rf /> followed by a newline:
1156 1105
1106 URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
1107
1108This could in theory be used to completely redefine your keymap.
1109
1110=item command:STRING
1111
1157If I<string> takes the form of C<command:STRING>, the specified B<STRING> 1112If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1158is interpreted and executed as @@RXVT_NAME@@'s control sequence. For 1113is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
1114the opposite of C<string:> - instead of sending it to the program running
1115in the terminal, it will be treated as if it were program output). This is
1116most useful to feed command sequences into @@RXVT_NAME@@.
1117
1159example the following means "change the current locale to C<zh_CN.GBK> 1118For example the following means "change the current locale to C<zh_CN.GBK>
1160when Control-Meta-c is being pressed": 1119when Control-Meta-c is being pressed":
1161 1120
1162 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 1121 URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1163 1122
1164If I<string> takes the form C<perl:STRING>, then the specified B<STRING> 1123The following example will map Control-Meta-1 and Control-Meta-2 to
1165is passed to the C<on_keyboard_command> perl handler. See the @@RXVT_NAME@@perl(3) 1124the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1166manpage. For example, the F<selection> extension (activated via 1125font-switching at runtime:
1167C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1168 1126
1169 URxvt.keysym.M-C-c: perl:selection:rot13 1127 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
1128 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1170 1129
1171Due the the large number of modifier combinations, a defined key mapping 1130Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1172will match if at I<at least> the specified identifiers are being set, and 1131info):
1173no other key mappings with those and more bits are being defined. That
1174means that defining a key map for C<a> will automatically provide
1175definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1176mappings themselves.
1177 1132
1178Unfortunately, this will override built-in key mappings. For example 1133 URxvt.keysym.M-C-3: command:\033[8;25;80t
1134 URxvt.keysym.M-C-4: command:\033[8;48;110t
1135
1136=item builtin:
1137
1138The builtin action is the action that @@RXVT_NAME@@ would execute if no
1139key binding existed for the key combination. The obvious use is to undo
1140the effect of existing bindings. The not so obvious use is to reinstate
1141bindings when another binding overrides too many modifiers.
1142
1179if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s 1143For example if you overwrite the C<Insert> key you will disable
1180C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the 1144@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1181user-defined keymap using the C<builtin:> replacement: 1145"holes" into the user-defined keymap using the C<builtin:> replacement:
1182 1146
1183 URxvt.keysym.Insert: <my insert key sequence> 1147 URxvt.keysym.Insert: <my insert key sequence>
1184 URxvt.keysym.S-Insert: builtin: 1148 URxvt.keysym.S-Insert: builtin:
1185 1149
1186The first line defines a mapping for C<Insert> and I<any> combination 1150The first line defines a mapping for C<Insert> and I<any> combination
1187of modifiers. The second line re-establishes the default mapping for 1151of modifiers. The second line re-establishes the default mapping for
1188C<Shift-Insert>. 1152C<Shift-Insert>.
1189 1153
1190The following example will map Control-Meta-1 and Control-Meta-2 to 1154=item builtin-string:
1191the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1192font-switching at runtime:
1193 1155
1194 URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 1156This action is mainly useful to restore string mappings for keys that
1195 URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 1157have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
1158difficult to explain - basically, this action will send the string to the
1159application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
1160action for it.
1196 1161
1197Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more 1162An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1198info): 1163selection when you press C<Shift-Insert>. With the following bindings, it
1164would instead emit the (undocumented, but what applications running in the
1165terminal might expect) sequence C<ESC [ 2 $> instead:
1199 1166
1200 URxvt.keysym.M-C-3: command:\033[8;25;80t 1167 URxvt.keysym.S-Insert: builtin-string:
1201 URxvt.keysym.M-C-4: command:\033[8;48;110t 1168 URxvt.keysym.C-S-Insert: builtin:
1169
1170The first line disables the paste functionality for that key
1171combination, and the second reinstates the default behaviour for
1172C<Control-Shift-Insert>, which would otherwise be overridden.
1173
1174Similarly, to let applications gain access to the C<C-M-c> (copy to
1175clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
1176this:
1177
1178 URxvt.keysym.C-S-c: builtin-string:
1179 URxvt.keysym.C-S-v: builtin-string:
1180
1181=item EXTENSION:STRING
1182
1183An action of this form passes the B<STRING> to the @@RXVT_NAME@@perl(3)
1184extension of the same name. The extension will be loaded automatically if
1185neccessary.
1186
1187Not all extensions define key actions, but popular extensions that do
1188include the I<selection> and I<matcher> extensions (documented in their
1189own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
1190respectively).
1191
1192From the silly examples department, this will rot13-"encrypt"
1193@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
1194keyboards:
1195
1196 URxvt.keysym.M-C-c: selection:rot13
1197
1198=item perl:STRING *DEPRECATED*
1199
1200This is a deprecated way of passing key mappings to perl extensions. It is
1201still supported, but should not be used anymore.
1202
1203=back
1202 1204
1203=item B<perl-ext-common>: I<string> 1205=item B<perl-ext-common>: I<string>
1204 1206
1205=item B<perl-ext>: I<string> 1207=item B<perl-ext>: I<string>
1206 1208
… …
1208use in this terminal instance; option B<-pe>. 1210use in this terminal instance; option B<-pe>.
1209 1211
1210Extension names can be prefixed with a C<-> sign to prohibit using 1212Extension names can be prefixed with a C<-> sign to prohibit using
1211them. This can be useful to selectively disable some extensions loaded 1213them. This can be useful to selectively disable some extensions loaded
1212by default, or specified via the C<perl-ext-common> resource. For 1214by default, or specified via the C<perl-ext-common> resource. For
1213example, C<default,-selection> will use all the default extension except 1215example, C<default,-selection> will use all the default extensions except
1214C<selection>. 1216C<selection>.
1215 1217
1216Extension names can also be followed by an argument in angle brackets 1218The default set includes the C<selection>, C<option-popup>,
1217(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for 1219C<selection-popup> and C<readline> extensions, any extensions that define
1218searchable scrollback to Alt/Meta-s). Mentioning the same extension 1220keybindings via C<BINDING> meta comments, extensions loaded because
1219multiple times with different arguments will pass multiple arguments to 1221their resources/commandline switches were used, and extensions which are
1220the extension. 1222mentioned in B<keysym> resources.
1221 1223
1222Each extension is looked up in the library directories, loaded if 1224Each extension is looked up in the library directories, loaded if
1223necessary, and bound to the current terminal instance. 1225necessary, and bound to the current terminal instance. When the library
1226search path contains multiple extension files of the same name, then the
1227first one found will be used.
1224 1228
1225If both of these resources are the empty string, then the perl 1229If both of these resources are the empty string, then the perl interpreter
1226interpreter will not be initialized. The idea behind two options is that 1230will not be initialized. The rationale for having two options is that
1227B<perl-ext-common> will be used for extensions that should be available to 1231B<perl-ext-common> will be used for extensions that should be available to
1228all instances, while B<perl-ext> is used for specific instances. 1232all instances, while B<perl-ext> is used for specific instances.
1229 1233
1230=item B<perl-eval>: I<string> 1234=item B<perl-eval>: I<string>
1231 1235
… …
1233the @@RXVT_NAME@@perl(3) manpage. 1237the @@RXVT_NAME@@perl(3) manpage.
1234 1238
1235=item B<perl-lib>: I<path> 1239=item B<perl-lib>: I<path>
1236 1240
1237Colon-separated list of additional directories that hold extension 1241Colon-separated list of additional directories that hold extension
1238scripts. When looking for extensions specified by the C<perl> resource, 1242scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1239@@RXVT_NAME@@ will first look in these directories and then in 1243in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1240F<@@RXVT_LIBDIR@@/urxvt/perl/>. 1244lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1241 1245
1242See the @@RXVT_NAME@@perl(3) manpage. 1246See the @@RXVT_NAME@@perl(3) manpage.
1243 1247
1244=item B<< selection.pattern-I<idx> >>: I<perl-regex> 1248=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1245 1249
… …
1249=item B<< selection-autotransform.I<idx> >>: I<perl-transform> 1253=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1250 1254
1251Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage 1255Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1252for details. 1256for details.
1253 1257
1254=item B<searchable-scrollback:> I<keysym> 1258=item B<searchable-scrollback:> I<keysym> *DEPRECATED*
1255 1259
1256Sets the hotkey that starts the incremental scrollback buffer search 1260This resource is deprecated and will be removed. Use a B<keysym> resource
1257(default: C<M-s>). 1261instead, e.g.:
1258 1262
1263 URxvt.keysym.M-s: searchable-scrollback:start
1264
1259=item B<urlLauncher>: I<string> 1265=item B<url-launcher>: I<string>
1260 1266
1261Specifies the program to be started with a URL argument. Used by the 1267Specifies the program to be started with a URL argument. Used by the
1262C<selection-popup> and C<matcher> perl extensions. 1268C<selection-popup> and C<matcher> perl extensions.
1263 1269
1264=item B<transient-for>: I<windowid> 1270=item B<transient-for>: I<windowid>
… …
1268=item B<override-redirect>: I<boolean> 1274=item B<override-redirect>: I<boolean>
1269 1275
1270Compile I<frills>: Sets override-redirect for the terminal window, making 1276Compile I<frills>: Sets override-redirect for the terminal window, making
1271it almost invisible to window managers; option B<-override-redirect>. 1277it almost invisible to window managers; option B<-override-redirect>.
1272 1278
1279=item B<iso14755:> I<boolean>
1280
1281Turn on/off ISO 14755 (default enabled).
1282
1273=item B<iso14755_52:> I<boolean> 1283=item B<iso14755_52:> I<boolean>
1274 1284
1275Turn on/off ISO 14755 5.2 mode (default enabled). 1285Turn on/off ISO 14755 5.2 mode (default enabled).
1286
1287=back
1288
1289=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
1290
1291=over 4
1292
1293=item B<-pixmap> I<file[;oplist]>
1294
1295=item B<backgroundPixmap:> I<file[;oplist]>
1296
1297Compile I<pixbuf>: Use the specified image file as the window's
1298background and also optionally specify a colon separated list of
1299operations to modify it. Note that you may need to quote the C<;>
1300character when using the command line option, as C<;> is usually a
1301metacharacter in shells. Supported operations are:
1302
1303=over 4
1304
1305=item B<WxH+X+Y>
1306
1307sets scale and position. B<"W" / "H"> specify the horizontal/vertical
1308scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
1309scale of 0 disables scaling.
1310
1311=item B<op=tile>
1312
1313enables tiling
1314
1315=item B<op=keep-aspect>
1316
1317maintain the image aspect ratio when scaling
1318
1319=item B<op=root-align>
1320
1321use the position of the terminal window relative to the root window as
1322the image offset, simulating a root window background
1323
1324=back
1325
1326The default scale and position setting is C<100x100+50+50>.
1327Alternatively, a predefined set of templates can be used to achieve
1328the most common setups:
1329
1330=over 4
1331
1332=item B<style=tiled>
1333
1334the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
1335
1336=item B<style=aspect-stretched>
1337
1338the image is scaled to fill the whole window maintaining the aspect
1339ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
1340
1341=item B<style=stretched>
1342
1343the image is scaled to fill the whole window. Equivalent to 100x100
1344
1345=item B<style=centered>
1346
1347the image is centered with no scaling. Equivalent to 0x0+50+50
1348
1349=item B<style=root-tiled>
1350
1351the image is tiled with no scaling and using 'root' positioning.
1352Equivalent to 0x0:op=tile:op=root-align
1353
1354=back
1355
1356If multiple templates are specified the last one wins. Note that a
1357template overrides all the scale, position and operations settings.
1358
1359If used in conjunction with pseudo-transparency, the specified pixmap
1360will be blended over the transparent background using alpha-blending.
1361
1362=item B<-tr>|B<+tr>
1363
1364=item B<transparent:> I<boolean>
1365
1366Turn on/off pseudo-transparency by using the root pixmap as background.
1367
1368B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
1369will be removed in future versions.
1370
1371=item B<-tint> I<colour>
1372
1373=item B<tintColor:> I<colour>
1374
1375Tint the transparent background with the given colour. Note that a
1376black tint yields a completely black image while a white tint yields
1377the image unchanged.
1378
1379=item B<-sh> I<number>
1380
1381=item B<shading:> I<number>
1382
1383Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
1384A value of 100 means no shading.
1385
1386=item B<-blr> I<HxV>
1387
1388=item B<blurRadius:> I<HxV>
1389
1390Apply gaussian blur with the specified radius to the transparent
1391background. If a single number is specified, the vertical and
1392horizontal radii are considered to be the same. Setting one of the
1393radii to 1 and the other to a large number creates interesting effects
1394on some backgrounds. The maximum radius value is 128. An horizontal or
1395vertical radius of 0 disables blurring.
1396
1397=item B<path:> I<path>
1398
1399Specify the colon-delimited search path for finding background image files.
1276 1400
1277=back 1401=back
1278 1402
1279=head1 THE SCROLLBAR 1403=head1 THE SCROLLBAR
1280 1404
… …
1328window causes the value of the PRIMARY selection (or CLIPBOARD with the 1452window causes the value of the PRIMARY selection (or CLIPBOARD with the
1329B<Meta> modifier) to be inserted as if it had been typed on the keyboard. 1453B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1330 1454
1331Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be 1455Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1332inserted too. 1456inserted too.
1457
1458rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
1459<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
1460binding causes the value of the internal selection to be copied to the
1461CLIPBOARD selection, while the second binding causes the value of the
1462CLIPBOARD selection to be inserted.
1333 1463
1334=back 1464=back
1335 1465
1336=head1 CHANGING FONTS 1466=head1 CHANGING FONTS
1337 1467
… …
1419B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that 1549B<@@RXVT_NAME@@> tries to write an entry into the I<utmp>(5) file so that
1420it can be seen via the I<who(1)> command, and can accept messages. To 1550it can be seen via the I<who(1)> command, and can accept messages. To
1421allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root 1551allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root
1422on some systems or setgid to root or to some other group on others. 1552on some systems or setgid to root or to some other group on others.
1423 1553
1424=head1 COLORS AND GRAPHICS 1554=head1 COLOURS AND GRAPHICS
1425 1555
1426In addition to the default foreground and background colours, 1556In addition to the default foreground and background colours,
1427B<@@RXVT_NAME@@> can display up to 16 colours (8 ANSI colours plus 1557B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1428high-intensity bold/blink versions of the same). Here is a list of the 1558high-intensity (potentially bold/blink) versions of the same, and 72 (or
1429colours with their names. 1559240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1560cube plus a 8 (24) colour greyscale ramp.
1561
1562Here is a list of the ANSI colours with their names.
1430 1563
1431=begin table 1564=begin table
1432 1565
1433 B<color0> (black) = Black 1566 B<color0> (black) = Black
1434 B<color1> (red) = Red3 1567 B<color1> (red) = Red3
… …
1454It is also possible to specify the colour values of B<foreground>, 1587It is also possible to specify the colour values of B<foreground>,
1455B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as 1588B<background>, B<cursorColor>, B<cursorColor2>, B<colorBD>, B<colorUL> as
1456a number 0-15, as a convenient shorthand to reference the colour name of 1589a number 0-15, as a convenient shorthand to reference the colour name of
1457color0-color15. 1590color0-color15.
1458 1591
1459In addition to the colours defined above, @@RXVT_NAME@@ offers an 1592The following text gives values for the standard 88 colour mode (and
1460additional 72 colours. The first 64 of those (with indices 16 to 79) 1593values for the 256 colour mode in parentheses).
1461consist of a 4*4*4 RGB colour cube (i.e. I<index = r * 16 + g * 4 + b +
146216>), followed by 8 additional shades of gray (with indices 80 to 87).
1463 1594
1595The RGB cube uses indices 16..79 (16..231) using the following formulas:
1596
1597 index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1598 index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1599
1600The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1601steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
1602the RGB cube.
1603
1464Together, all those colours implement the 88 colour xterm colours. Only 1604Together, all those colours implement the 88 (256) colour xterm
1465the first 16 can be changed using resources currently, the rest can only 1605colours. Only the first 16 can be changed using resources currently, the
1466be changed via command sequences ("escape codes"). 1606rest can only be changed via command sequences ("escape codes").
1607
1608Applications are advised to use terminfo or command sequences to discover
1609number and RGB values of all colours (yes, you can query this...).
1467 1610
1468Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by 1611Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1469always swapping the foreground/background colours. This is in contrast to 1612always swapping the foreground/background colours. This is in contrast to
1470I<xterm>(1) where the colours are only swapped if they have not otherwise 1613I<xterm>(1) where the colours are only swapped if they have not otherwise
1471been specified. For example, 1614been specified. For example,
1472 1615
1473=over 4
1474
1475=item B<@@RXVT_NAME@@ -fg Black -bg White -rv> 1616 @@RXVT_NAME@@ -fg Black -bg White -rv
1476 1617
1477would yield White on Black, while on I<xterm>(1) it would yield Black 1618would yield White on Black, while on I<xterm>(1) it would yield Black on
1478on White. 1619White.
1479
1480=back
1481 1620
1482=head2 ALPHA CHANNEL SUPPORT 1621=head2 ALPHA CHANNEL SUPPORT
1483 1622
1484If Xft support has been compiled in and as long as Xft/Xrender/X don't get 1623If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1485their act together, rxvt-unicode will do it's own alpha channel management: 1624their act together, rxvt-unicode will do its own alpha channel management:
1486 1625
1487You can prefix any color with an opaquenes percentage enclosed in 1626You can prefix any colour with an opaqueness percentage enclosed in
1488brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage 1627brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1489(0-100) that specifies the opacity of the color, where C<0> is completely 1628(0-100) that specifies the opacity of the colour, where C<0> is completely
1490transparent and C<100> is completely opaque. For example, C<[50]red> is a 1629transparent and C<100> is completely opaque. For example, C<[50]red> is a
1491half-transparent red, while C<[95]#00ff00> is an almost opaque green. This 1630half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1492is the recommended format to specify transparency values, and works with 1631is the recommended format to specify transparency values, and works with
1493all ways to specify a colour. 1632all ways to specify a colour.
1494 1633
… …
1572 1711
1573=item B<SHELL> 1712=item B<SHELL>
1574 1713
1575The shell to be used for command execution, defaults to C</bin/sh>. 1714The shell to be used for command execution, defaults to C</bin/sh>.
1576 1715
1577=item B<RXVT_SOCKET> 1716=item B<RXVT_SOCKET> [I<sic>]
1578 1717
1579The unix domain socket path used by @@RXVT_NAME@@c(1) and 1718The unix domain socket path used by @@RXVT_NAME@@c(1) and
1580@@RXVT_NAME@@d(1). 1719@@RXVT_NAME@@d(1).
1581 1720
1582Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>. 1721Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
1722
1723=item B<URXVT_PERL_LIB>
1724
1725Additional F<:>-separated library search path for perl extensions. Will be
1726searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
1727directory.
1728
1729=item B<URXVT_PERL_VERBOSITY>
1730
1731See L<@@RXVT_NAME@@perl>(3).
1583 1732
1584=item B<HOME> 1733=item B<HOME>
1585 1734
1586Used to locate the default directory for the unix domain socket for 1735Used to locate the default directory for the unix domain socket for
1587daemon communications and to locate various resource files (such as 1736daemon communications and to locate various resource files (such as
1588C<.Xdefaults>) 1737C<.Xdefaults>)
1589 1738
1590=item B<XAPPLRESDIR> 1739=item B<XAPPLRESDIR>
1591 1740
1592Directory where various X resource files are being located. 1741Directory where application-specific X resource files are located.
1593 1742
1594=item B<XENVIRONMENT> 1743=item B<XENVIRONMENT>
1595 1744
1596If set and accessible, gives the name of a X resource file to be loaded by 1745If set and accessible, gives the name of a X resource file to be loaded by
1597@@RXVT_NAME@@. 1746@@RXVT_NAME@@.
… …
1602 1751
1603=over 4 1752=over 4
1604 1753
1605=item B</usr/lib/X11/rgb.txt> 1754=item B</usr/lib/X11/rgb.txt>
1606 1755
1607Color names. 1756Colour names.
1608 1757
1609=back 1758=back
1610 1759
1611=head1 SEE ALSO 1760=head1 SEE ALSO
1612 1761
1762@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1613@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) 1763@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1614 1764
1615=head1 CURRENT PROJECT COORDINATOR 1765=head1 CURRENT PROJECT COORDINATOR
1616 1766
1617=over 4 1767=over 4
1618 1768
1619=item Project Coordinator 1769=item Project Coordinator
1620 1770
1621Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >> 1771Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1622 1772
1623L<http://software.schmorp.de/pkg/rxvt-unicode.html> 1773L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1624 1774
1625=back 1775=back
1626 1776
… …
1630 1780
1631=item John Bovey 1781=item John Bovey
1632 1782
1633University of Kent, 1992, wrote the original Xvt. 1783University of Kent, 1992, wrote the original Xvt.
1634 1784
1635=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >> 1785=item Rob Nation <nation@rocket.sanders.lockheed.com>
1636 1786
1637very heavily modified Xvt and came up with Rxvt 1787very heavily modified Xvt and came up with Rxvt
1638 1788
1639=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >> 1789=item Angelo Haritsis <ah@doc.ic.ac.uk>
1640 1790
1641wrote the Greek Keyboard Input (no longer in code) 1791wrote the Greek Keyboard Input (no longer in code)
1642 1792
1643=item mj olesen L<< <olesen@me.QueensU.CA> >> 1793=item mj olesen <olesen@me.QueensU.CA>
1644 1794
1645Wrote the menu system. 1795Wrote the menu system.
1646 1796
1647Project Coordinator (changes.txt 2.11 to 2.21) 1797Project Coordinator (changes.txt 2.11 to 2.21)
1648 1798
1649=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >> 1799=item Oezguer Kesim <kesim@math.fu-berlin.de>
1650 1800
1651Project Coordinator (changes.txt 2.21a to 2.4.5) 1801Project Coordinator (changes.txt 2.21a to 2.4.5)
1652 1802
1653=item Geoff Wing L<< <gcw@pobox.com> >> 1803=item Geoff Wing <gcw@pobox.com>
1654 1804
1655Rewrote screen display and text selection routines. 1805Rewrote screen display and text selection routines.
1656 1806
1657Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) 1807Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1658 1808
1659=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >> 1809=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1660 1810
1661Forked rxvt-unicode, unicode support, rewrote almost all the code, perl 1811Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1662extension, random hacks, numerous bugfixes and extensions. 1812extension, random hacks, numerous bugfixes and extensions.
1663 1813
1664Project Coordinator (Changes 1.0 -) 1814Project Coordinator (Changes 1.0 -)
1665 1815
1666=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >> 1816=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1667 1817
1668Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing. 1818pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1669 1819
1670=back 1820=back
1671 1821

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines