[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.178 by root, Sun May 23 01:05:01 2010 UTC vs.
Revision 1.246 by sf-exg, Tue Jun 21 12:03:55 2016 UTC

…		…
98	is still respected. but deprecated). In the absence of this option, the	98	is still respected. but deprecated). In the absence of this option, the
99	display specified by the B<DISPLAY> environment variable is used.	99	display specified by the B<DISPLAY> environment variable is used.
100		100
101	=item B<-depth> I<bitdepth>	101	=item B<-depth> I<bitdepth>
102		102
103	Compile I<xft>: Attempt to find a visual with the given bit depth;	103	Compile I<frills>: Attempt to find a visual with the given bit depth;
104	resource B<depth>.	104	resource B<depth>.
105		105
106	[Please note that many X servers (and libXft) are buggy with	106	[Please note that many X servers (and libXft) are buggy with
107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts	107	respect to C<-depth 32> and/or alpha channels, and will cause all sorts
108	of graphical corruption. This is harmless, but we can't do anything about	108	of graphical corruption. This is harmless, but we can't do anything about
109	this, so watch out]	109	this, so watch out]
110		110
		111	=item B<-visual> I<visualID>
		112
		113	Compile I<frills>: Use the given visual (see e.g. C<xdpyinfo> for
		114	possible visual ids) instead of the default, and also allocate a private
		115	colormap. All visual types except for DirectColor are supported.
		116
111	=item B<-geometry> I<geom>	117	=item B<-geometry> I<geom>
112		118
113	Window geometry (B<-g> still respected); resource B<geometry>.	119	Window geometry (B<-g> still respected); resource B<geometry>.
114		120
115	=item B<-rv>\|B<+rv>	121	=item B<-rv>\|B<+rv>
…		…
121	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.	127	Turn on/off jump scrolling (allow multiple lines per refresh); resource B<jumpScroll>.
122		128
123	=item B<-ss>\|B<+ss>	129	=item B<-ss>\|B<+ss>
124		130
125	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.	131	Turn on/off skip scrolling (allow multiple screens per refresh); resource B<skipScroll>.
126
127	=item B<-tr>\|B<+tr>
128
129	Turn on/off illusion of a transparent window background; resource B<transparent>.
130
131	B<-ip> is still accepted as an obsolete alias but will be removed in
132	future versions.
133
134	I<Please address all transparency related issues to Sasha Vasko at
135	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
136		132
137	=item B<-fade> I<number>	133	=item B<-fade> I<number>
138		134
139	Fade the text by the given percentage when focus is lost. Small values	135	Fade the text by the given percentage when focus is lost. Small values
140	fade a little only, 100 completely replaces all colours by the fade	136	fade a little only, 100 completely replaces all colours by the fade
…		…
143	=item B<-fadecolor> I<colour>	139	=item B<-fadecolor> I<colour>
144		140
145	Fade to this colour when fading is used (see B<-fade>). The default colour	141	Fade to this colour when fading is used (see B<-fade>). The default colour
146	is opaque black. resource B<fadeColor>.	142	is opaque black. resource B<fadeColor>.
147		143
148	=item B<-tint> I<colour>
149
150	Tint the transparent background pixmap with the given colour when
151	transparency is enabled with B<-tr>. This only works for
152	non-tiled backgrounds, currently. See also the B<-sh> option that can be
153	used to brighten or darken the image in addition to tinting it.
154	Please note that certain tint colours can be applied on the server-side,
155	thus yielding performance gain of two orders of magnitude. These colours are:
156	blue, red, green, cyan, magenta, yellow, and those close to them. Also
157	pure black and pure white colours essentially mean no tinting; resource
158	I<tintColor>. Example:
159
160	@@RXVT_NAME@@ -tr -tint blue -sh 40
161
162	=item B<-sh> I<number>
163
164	Darken (0 .. 100) or lighten (100 .. 200) the transparent
165	background image in addition to (or instead of) tinting it;
166	resource I<shading>.
167
168	=item B<-blt> I<string>
169
170	Specify background blending type. If background pixmap is specified
171	at the same time as transparency - such pixmap will be blended over
172	transparency image, using method specified. Supported values are :
173	B<add>, B<alphablend>, B<allanon> - colour values averaging, B<colorize>,
174	B<darken>, B<diff>, B<dissipate>, B<hue>, B<lighten>, B<overlay>,
175	B<saturate>, B<screen>, B<sub>, B<tint>, B<value>. The default is
176	alpha-blending. Compile I<afterimage>; resource I<blendType>.
177
178	=item B<-blr> I<HxV>
179
180	Apply Gaussian Blur with the specified radii to the transparent
181	background image. If single number is specified - both vertical and
182	horizontal radii are considered to be the same. Setting one of the
183	radii to 1 and another to a large number creates interesting effects
184	on some backgrounds. Maximum radius value is 128. Compile I<afterimage>;
185	resource I<blurRadius>.
186
187	=item B<-icon> I<file>	144	=item B<-icon> I<file>
188		145
189	Compile I<afterimage>: Use the specified image as application icon. This	146	Compile I<pixbuf>: Use the specified image as application icon. This
190	is used by many window managers, taskbars and pagers to represent the	147	is used by many window managers, taskbars and pagers to represent the
191	application window; resource I<iconFile>.	148	application window; resource I<iconFile>.
192		149
193	=item B<-bg> I<colour>	150	=item B<-bg> I<colour>
194		151
195	Window background colour; resource B<background>.	152	Window background colour; resource B<background>.
196		153
197	=item B<-fg> I<colour>	154	=item B<-fg> I<colour>
198		155
199	Window foreground colour; resource B<foreground>.	156	Window foreground colour; resource B<foreground>.
200
201	=item B<-pixmap> I<file[;geom[:op1][:op2][...]]>
202
203	Compile I<afterimage>: Specify image file for the background and also
204	optionally specify its scaling with a geometry string. Note you may need to
205	add quotes to avoid special shell interpretation of the C<;> in the
206	command-line; for more details see resource B<backgroundPixmap>.
207		157
208	=item B<-cr> I<colour>	158	=item B<-cr> I<colour>
209		159
210	The cursor colour; resource B<cursorColor>.	160	The cursor colour; resource B<cursorColor>.
211		161
…		…
270		220
271	=item B<-ls>\|B<+ls>	221	=item B<-ls>\|B<+ls>
272		222
273	Start as a login-shell/sub-shell; resource B<loginShell>.	223	Start as a login-shell/sub-shell; resource B<loginShell>.
274		224
		225	=item B<-mc> I<milliseconds>
		226
		227	Specify the maximum time between multi-click selections.
		228
275	=item B<-ut>\|B<+ut>	229	=item B<-ut>\|B<+ut>
276		230
277	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource	231	Compile I<utmp>: Inhibit/enable writing a utmp entry; resource
278	B<utmpInhibit>.	232	B<utmpInhibit>.
279		233
…		…
357		311
358	=item B<-override-redirect>	312	=item B<-override-redirect>
359		313
360	Compile I<frills>: Sets override-redirect on the window; resource	314	Compile I<frills>: Sets override-redirect on the window; resource
361	B<override-redirect>.	315	B<override-redirect>.
		316
		317	=item B<-dockapp>
		318
		319	Sets the initial state of the window to WithdrawnState, which makes
		320	window managers that support this extension treat it as a dockapp.
362		321
363	=item B<-sbg>	322	=item B<-sbg>
364		323
365	Compile I<frills>: Disable the usage of the built-in block graphics/line	324	Compile I<frills>: Disable the usage of the built-in block graphics/line
366	drawing characters and just rely on what the specified fonts provide. Use	325	drawing characters and just rely on what the specified fonts provide. Use
…		…
421	=item B<-pt> I<style>	380	=item B<-pt> I<style>
422		381
423	Compile I<XIM>: input style for input method; B<OverTheSpot>,	382	Compile I<XIM>: input style for input method; B<OverTheSpot>,
424	B<OffTheSpot>, B<Root>; resource B<preeditType>.	383	B<OffTheSpot>, B<Root>; resource B<preeditType>.
425		384
		385	If the perl extension C<xim-onthespot> is used (which is the default),
		386	then additionally the C<OnTheSpot> preedit type is available.
		387
426	=item B<-im> I<text>	388	=item B<-im> I<text>
427		389
428	Compile I<XIM>: input method name. resource B<inputMethod>.	390	Compile I<XIM>: input method name. resource B<inputMethod>.
429		391
430	=item B<-imlocale> I<string>	392	=item B<-imlocale> I<string>
…		…
571	You can set and change the resources using X11 tools like B<xrdb>. Many	533	You can set and change the resources using X11 tools like B<xrdb>. Many
572	distribution do also load settings from the B<~/.Xresources> file when X	534	distribution do also load settings from the B<~/.Xresources> file when X
573	starts. @@RXVT_NAME@@ will consult the following files/resources in order,	535	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
574	with later settings overwriting earlier ones:	536	with later settings overwriting earlier ones:
575		537
576	1. system-wide app-defaults file, either locale-dependent OR global
577	2. app-defaults file in $XAPPLRESDIR	538	1. app-defaults file in $XAPPLRESDIR
		539	2. $HOME/.Xdefaults
578	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	540	3. RESOURCE_MANAGER property on root-window of screen 0
579	4. SCREEN_RESOURCES for the current screen	541	4. SCREEN_RESOURCES property on root-window of the current screen
580	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	542	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
581	6. resources specified via -xrm on the commandline	543	6. resources specified via -xrm on the commandline
582		544
583	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class	545	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
584	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources	546	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
…		…
700		662
701	B<False>: specify that everything is to be displayed, even	663	B<False>: specify that everything is to be displayed, even
702	if the refresh is too fast for the human eye to read anything (or the	664	if the refresh is too fast for the human eye to read anything (or the
703	monitor to display anything); option B<+ss>.	665	monitor to display anything); option B<+ss>.
704		666
705	=item B<transparent:> I<boolean>
706
707	Turn on/off illusion of a transparent window background.
708
709	B<inheritPixmap> is still accepted as an obsolete alias but will be removed in
710	future versions.
711
712	I<Please address all transparency related issues to Sasha Vasko at
713	sasha@aftercode.net. Read the FAQ (man 7 @@RXVT_NAME@@)!>
714
715	=item B<fading:> I<number>	667	=item B<fading:> I<number>
716		668
717	Fade the text by the given percentage when focus is lost; option B<-fade>.	669	Fade the text by the given percentage when focus is lost; option B<-fade>.
718		670
719	=item B<fadeColor:> I<colour>	671	=item B<fadeColor:> I<colour>
720		672
721	Fade to this colour, when fading is used (see B<fading:>). The default	673	Fade to this colour, when fading is used (see B<fading:>). The default
722	colour is black; option B<-fadecolor>.	674	colour is black; option B<-fadecolor>.
723		675
724	=item B<tintColor:> I<colour>
725
726	Tint the transparent background pixmap with the given colour; option
727	B<-tint>.
728
729	=item B<shading:> I<number>
730
731	Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image
732	in addition to tinting it; option B<-sh>.
733
734	=item B<blendType:> I<string>
735
736	Specify background blending type; option B<-blt>.
737
738	=item B<blurRadius:> I<number>
739
740	Apply gaussian blur with the specified radius to the transparent
741	background image; option B<-blr>.
742
743	=item B<iconFile:> I<file>	676	=item B<iconFile:> I<file>
744		677
745	Set the application icon pixmap; option B<-icon>.	678	Set the application icon pixmap; option B<-icon>.
746		679
747	=item B<scrollColor:> I<colour>	680	=item B<scrollColor:> I<colour>
…		…
755		688
756	=item B<borderColor:> I<colour>	689	=item B<borderColor:> I<colour>
757		690
758	The colour of the border around the text area and between the scrollbar	691	The colour of the border around the text area and between the scrollbar
759	and the text.	692	and the text.
760
761	=item B<backgroundPixmap:> I<file[;geom[:op1][:op2][...]]>
762
763	Use the specified image file for the background and also
764	optionally specify its scaling with a geometry string B<WxH+X+Y>,
765	(default C<0x0+50+50>) in which B<"W" / "H"> specify the
766	horizontal/vertical scale (percent), and B<"X" / "Y"> locate the image
767	centre (percent). A scale of 0 displays the image with tiling. A scale
768	of 1 displays the image without any scaling. A scale of 2 to 9 specifies
769	an integer number of images in that direction. No image will be magnified
770	beyond 10 times its original size. The maximum permitted scale is 1000.
771	Additional operations can be specified after colon B<:op1:op2...>.
772	Supported operations are:
773
774	tile force background image to be tiled and not scaled. Equivalent to 0x0
775	propscale will scale image keeping proportions
776	auto will scale image to match window size. Equivalent to 100x100
777	hscale will scale image horizontally to the window size
778	vscale will scale image vertically to the window size
779	scale will scale image to match window size
780	root will tile image as if it was a root window background, auto-adjusting
781	whenever terminal window moves
782
783	If used in conjunction with B<-tr> option, the specified pixmap will be
784	blended over transparency image using either alpha-blending, or any
785	other blending type, specified with B<-blt "type"> option.
786
787	=item B<path:> I<path>
788
789	Specify the colon-delimited search path for finding background image files.
790		693
791	=item B<font:> I<fontlist>	694	=item B<font:> I<fontlist>
792		695
793	Select the fonts to be used. This is a comma separated list of font names	696	Select the fonts to be used. This is a comma separated list of font names
794	that are checked in order when trying to find glyphs for characters. The	697	that are checked in order when trying to find glyphs for characters. The
…		…
891		794
892	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of	795	B<True>: start as a login shell by prepending a `-' to B<argv[0]> of
893	the shell; option B<-ls>. B<False>: start as a normal sub-shell	796	the shell; option B<-ls>. B<False>: start as a normal sub-shell
894	[default]; option B<+ls>.	797	[default]; option B<+ls>.
895		798
		799	=item B<multiClickTime:> I<number>
		800
		801	Specify the maximum time in milliseconds between multi-click select
		802	events. The default is 500 milliseconds; option B<-mc>.
		803
896	=item B<utmpInhibit:> I<boolean>	804	=item B<utmpInhibit:> I<boolean>
897		805
898	B<True>: inhibit writing record into the system log file B<utmp>;	806	B<True>: inhibit writing record into the system log file B<utmp>;
899	option B<-ut>. B<False>: write record into the system log file B<utmp>	807	option B<-ut>. B<False>: write record into the system log file B<utmp>
900	[default]; option B<+ut>.	808	[default]; option B<+ut>.
…		…
917	=item B<scrollstyle:> I<mode>	825	=item B<scrollstyle:> I<mode>
918		826
919	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is	827	Set scrollbar style to B<rxvt>, B<plain>, B<next> or B<xterm>. B<plain> is
920	the author's favourite.	828	the author's favourite.
921		829
		830	=item B<thickness:> I<number>
		831
		832	Set the scrollbar width in pixels.
		833
922	=item B<scrollBar:> I<boolean>	834	=item B<scrollBar:> I<boolean>
923		835
924	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:	836	B<True>: enable the scrollbar [default]; option B<-sb>. B<False>:
925	disable the scrollbar; option B<+sb>.	837	disable the scrollbar; option B<+sb>.
926		838
…		…
945	B<False>: do not scroll to bottom when tty receives output; option	857	B<False>: do not scroll to bottom when tty receives output; option
946	B<+si>.	858	B<+si>.
947		859
948	=item B<scrollWithBuffer:> I<boolean>	860	=item B<scrollWithBuffer:> I<boolean>
949		861
950	B<True>: scroll with scrollback buffer when tty receives new lines (and	862	B<True>: scroll with scrollback buffer when tty receives new lines (i.e.
951	B<scrollTtyOutput> is False); option B<-sw>. B<False>: do not scroll	863	try to show the same lines) and B<scrollTtyOutput> is False; option
952	with scrollback buffer when tty receives new lines; option B<+sw>.	864	B<-sw>. B<False>: do not scroll with scrollback buffer when tty receives
		865	new lines; option B<+sw>.
953		866
954	=item B<scrollTtyKeypress:> I<boolean>	867	=item B<scrollTtyKeypress:> I<boolean>
955		868
956	B<True>: scroll to bottom when a non-special key is pressed. Special keys	869	B<True>: scroll to bottom when a non-special key is pressed. Special keys
957	are those which are intercepted by rxvt-unicode for special handling and	870	are those which are intercepted by rxvt-unicode for special handling and
958	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to	871	are not passed onto the shell; option B<-sk>. B<False>: do not scroll to
959	bottom when a non-special key is pressed; option B<+sk>.	872	bottom when a non-special key is pressed; option B<+sk>.
960		873
961	=item B<saveLines:> I<number>	874	=item B<saveLines:> I<number>
962		875
963	Save I<number> lines in the scrollback buffer [default 64]. This	876	Save I<number> lines in the scrollback buffer [default 1000]; option B<-sl>.
964	resource is limited on most machines to 65535; option B<-sl>.
965		877
966	=item B<internalBorder:> I<number>	878	=item B<internalBorder:> I<number>
967		879
968	Internal border of I<number> pixels. This resource is limited to 100;	880	Internal border of I<number> pixels. This resource is limited to 100;
969	option B<-b>.	881	option B<-b>.
…		…
1032		944
1033	=item B<pointerColor2:> I<colour>	945	=item B<pointerColor2:> I<colour>
1034		946
1035	Mouse pointer background colour.	947	Mouse pointer background colour.
1036		948
		949	=item B<pointerShape:> I<string>
		950
		951	Compile I<frills>: Specifies the name of the mouse pointer shape
		952	[default B<xterm>]. See the macros in the B<X11/cursorfont.h> include
		953	file for possible values (omit the C<XC_> prefix).
		954
1037	=item B<pointerBlankDelay:> I<number>	955	=item B<pointerBlankDelay:> I<number>
1038		956
1039	Specifies number of seconds before blanking the pointer [default 2]. Use a	957	Specifies number of seconds before blanking the pointer [default 2]. Use a
1040	large number (e.g. C<987654321>) to effectively disable the timeout.	958	large number (e.g. C<987654321>) to effectively disable the timeout.
1041		959
1042	=item B<backspacekey:> I<string>	960	=item B<backspacekey:> I<string>
1043		961
1044	The string to send when the backspace key is pressed. If set to B<DEC>	962	The string to send when the backspace key is pressed. If set to B<DEC>
1045	or unset it will send B<Delete> (code 127) or, if shifted, B<Backspace>	963	or unset it will send B<Delete> (code 127) or, with control, B<Backspace>
1046	(code 8) - which can be reversed with the appropriate DEC private mode	964	(code 8) - which can be reversed with the appropriate DEC private mode
1047	escape sequence.	965	escape sequence.
1048		966
1049	=item B<deletekey:> I<string>	967	=item B<deletekey:> I<string>
1050		968
…		…
1067		985
1068	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>	986	B<< BACKSLASH `"'&()*,;<=>?@[]^{\|} >>
1069		987
1070	=item B<preeditType:> I<style>	988	=item B<preeditType:> I<style>
1071		989
1072	B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.	990	B<OnTheSpot>, B<OverTheSpot>, B<OffTheSpot>, B<Root>; option B<-pt>.
1073		991
1074	=item B<inputMethod:> I<name>	992	=item B<inputMethod:> I<name>
1075		993
1076	I<name> of inputMethod to use; option B<-im>.	994	I<name> of inputMethod to use; option B<-im>.
1077		995
…		…
1146	Sets the working directory for the shell (or the command specified via	1064	Sets the working directory for the shell (or the command specified via
1147	B<-e>). The I<path> must be an absolute path and it must exist for	1065	B<-e>). The I<path> must be an absolute path and it must exist for
1148	@@RXVT_NAME@@ to start. If it isn't specified then the current working	1066	@@RXVT_NAME@@ to start. If it isn't specified then the current working
1149	directory will be used; option B<-cd>.	1067	directory will be used; option B<-cd>.
1150		1068
1151	=item B<keysym.>I<sym>: I<string>	1069	=item B<keysym.>I<sym>: I<action>
1152		1070
1153	Compile I<frills>: Associate I<string> with keysym I<sym>. The	1071	Compile I<frills>: Associate I<action> with keysym I<sym>. The intervening
1154	intervening resource name B<keysym.> cannot be omitted.	1072	resource name B<keysym.> cannot be omitted.
1155		1073
1156	The format of I<sym> is "I<(modifiers-)key>", where I<modifiers> can be	1074	Using this resource, you can map key combinations such as
1157	any combination of B<ISOLevel3>, B<AppKeypad>, B<Control>, B<NumLock>,	1075	C<Ctrl-Shift-BackSpace> to various actions, such as outputting a different
1158	B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>, B<Mod3>, B<Mod4>, B<Mod5>,	1076	string than would normally result from that combination, making the
1159	and the abbreviated B<I>, B<K>, B<C>, B<N>, B<S>, B<M>, B<A>, B<L>, B<1>,	1077	terminal scroll up or down the way you want it, or any other thing an
1160	B<2>, B<3>, B<4>, B<5>.	1078	extension might provide.
		1079
		1080	The key combination that triggers the action, I<sym>, has the following format:
		1081
		1082	(modifiers-)key
		1083
		1084	Where I<modifiers> can be any combination of B<ISOLevel3>, B<AppKeypad>,
		1085	B<Control>, B<NumLock>, B<Shift>, B<Meta>, B<Lock>, B<Mod1>, B<Mod2>,
		1086	B<Mod3>, B<Mod4>, B<Mod5>, and the abbreviated B<I>, B<K>, B<C>, B<N>,
		1087	B<S>, B<M>, B<A>, B<L>, B<1>, B<2>, B<3>, B<4>, B<5>.
1161		1088
1162	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to	1089	The B<NumLock>, B<Meta> and B<ISOLevel3> modifiers are usually aliased to
1163	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr	1090	whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr
1164	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the	1091	keys are being mapped. B<AppKeypad> is a synthetic modifier mapped to the
1165	current application keymap mode state.	1092	current application keymap mode state.
1166		1093
1167	The spellings of I<key> can be obtained by using B<xev>(1) command or	1094	Due the the large number of modifier combinations, a key mapping will
1168	searching keysym macros from B</usr/X11R6/include/X11/keysymdef.h> and	1095	match if I<at least> the specified identifiers are being set, and no other
		1096	key mappings with those and more bits are being defined. That means that
		1097	defining a mapping for C<a> will automatically provide definitions for
		1098	C<Meta-a>, C<Shift-a> and so on, unless some of those are defined mappings
		1099	themselves. See the C<builtin:> action, below, for a way to work around
		1100	this when this is a problem.
		1101
		1102	The spelling of I<key> depends on your implementation of X. An easy way to
		1103	find a key name is to use the B<xev>(1) command. You can find a list by
		1104	looking for the C<XK_> macros in the B<X11/keysymdef.h> include file (omit
1169	omitting the prefix B<XK_>. Alternatively you can specify I<key> by its hex	1105	the C<XK_> prefix). Alternatively you can specify I<key> by its hex keysym
1170	keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of I<sym>s is not	1106	value (B<0x0000 - 0xFFFF>).
1171	performed in an exact manner; however, the closest match is assured.
1172		1107
1173	I<string> may contain escape values (C<\n>: newline, C<\000>: octal	1108	As with any resource value, the I<action> string may contain backslash
		1109	escape sequences (C<\n>: newline, C<\\>: backslash, C<\000>: octal
1174	number), see RESOURCES in C<man 7 X> for futher details.	1110	number), see RESOURCES in C<man 7 X> for further details.
1175		1111
1176	You can define a range of keysyms in one shot by providing a I<string>	1112	An action starts with an action prefix that selects a certain type
1177	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimiter `/'	1113	of action, followed by a colon. An action string without colons is
		1114	interpreted as a literal string to pass to the tty (as if it was
		1115	prefixed with C<string:>).
		1116
		1117	The following action prefixes are known - extensions can provide
		1118	additional prefixes:
		1119
		1120	=over 4
		1121
		1122	=item string:STRING
		1123
		1124	If the I<action> starts with C<string:> (or otherwise contains no colons),
		1125	then the remaining C<STRING> will be passed to the program running in the
		1126	terminal. For example, you could replace whatever Shift-Tab outputs by the
		1127	string C<echo rm -rf /> followed by a newline:
		1128
		1129	URxvt.keysym.Shift-Tab: string:echo rm -rf /\n
		1130
		1131	This could in theory be used to completely redefine your keymap.
		1132
		1133	In addition, for actions of this type, you can define a range of
		1134	keysyms in one shot by loading the C<keysym-list> perl extension and
		1135	providing an I<action> with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where
1178	should be a character not used by the strings.	1136	the delimiter `/' should be a character not used by the strings.
1179		1137
1180	Its usage can be demonstrated by an example:	1138	Its usage can be demonstrated by an example:
1181		1139
1182	URxvt.keysym.M-C-0x61: list\|\033<M-C-\|abc\|>	1140	URxvt.keysym.M-C-0x61: list\|\033<\|abc\|>
1183		1141
1184	The above line is equivalent to the following three lines:	1142	The above line is equivalent to the following three lines:
1185		1143
1186	URxvt.keysym.Meta-Control-0x61: \033<M-C-a>	1144	URxvt.keysym.Meta-Control-0x61: string:\033<a>
1187	URxvt.keysym.Meta-Control-0x62: \033<M-C-b>	1145	URxvt.keysym.Meta-Control-0x62: string:\033<b>
1188	URxvt.keysym.Meta-Control-0x63: \033<M-C-c>	1146	URxvt.keysym.Meta-Control-0x63: string:\033<c>
1189		1147
		1148	=item command:STRING
		1149
1190	If I<string> takes the form of C<command:STRING>, the specified B<STRING>	1150	If I<action> takes the form of C<command:STRING>, the specified B<STRING>
1191	is interpreted and executed as @@RXVT_NAME@@'s control sequence. For	1151	is interpreted and executed as @@RXVT_NAME@@'s control sequence (basically
		1152	the opposite of C<string:> - instead of sending it to the program running
		1153	in the terminal, it will be treated as if it were program output). This is
		1154	most useful to feed command sequences into @@RXVT_NAME@@.
		1155
1192	example the following means "change the current locale to C<zh_CN.GBK>	1156	For example the following means "change the current locale to C<zh_CN.GBK>
1193	when Control-Meta-c is being pressed":	1157	when Control-Meta-c is being pressed":
1194		1158
1195	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007	1159	URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007
1196		1160
1197	If I<string> takes the form C<perl:STRING>, then the specified B<STRING>	1161	The following example will map Control-Meta-1 and Control-Meta-2 to
1198	is passed to the C<on_user_command> perl handler. See the @@RXVT_NAME@@perl(3)	1162	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1199	manpage. For example, the F<selection> extension (activated via	1163	font-switching at runtime:
1200	C<@@RXVT_NAME@@ -pe selection>) listens for C<selection:rot13> events:
1201		1164
1202	URxvt.keysym.M-C-c: perl:selection:rot13	1165	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007
		1166	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007
1203		1167
1204	Due the the large number of modifier combinations, a defined key mapping	1168	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more
1205	will match if at I<at least> the specified identifiers are being set, and	1169	info):
1206	no other key mappings with those and more bits are being defined. That
1207	means that defining a key map for C<a> will automatically provide
1208	definitions for C<Meta-a>, C<Shift-a> and so on, unless some of those are defined
1209	mappings themselves.
1210		1170
1211	Unfortunately, this will override built-in key mappings. For example	1171	URxvt.keysym.M-C-3: command:\033[8;25;80t
		1172	URxvt.keysym.M-C-4: command:\033[8;48;110t
		1173
		1174	=item builtin:
		1175
		1176	The builtin action is the action that @@RXVT_NAME@@ would execute if no
		1177	key binding existed for the key combination. The obvious use is to undo
		1178	the effect of existing bindings. The not so obvious use is to reinstate
		1179	bindings when another binding overrides too many modifiers.
		1180
1212	if you overwrite the C<Insert> key you will disable @@RXVT_NAME@@'s	1181	For example if you overwrite the C<Insert> key you will disable
1213	C<Shift-Insert> mapping. To re-enable that, you can poke "holes" into the	1182	@@RXVT_NAME@@'s C<Shift-Insert> mapping. To re-enable that, you can poke
1214	user-defined keymap using the C<builtin:> replacement:	1183	"holes" into the user-defined keymap using the C<builtin:> replacement:
1215		1184
1216	URxvt.keysym.Insert: <my insert key sequence>	1185	URxvt.keysym.Insert: <my insert key sequence>
1217	URxvt.keysym.S-Insert: builtin:	1186	URxvt.keysym.S-Insert: builtin:
1218		1187
1219	The first line defines a mapping for C<Insert> and I<any> combination	1188	The first line defines a mapping for C<Insert> and I<any> combination
1220	of modifiers. The second line re-establishes the default mapping for	1189	of modifiers. The second line re-establishes the default mapping for
1221	C<Shift-Insert>.	1190	C<Shift-Insert>.
1222		1191
1223	The following example will map Control-Meta-1 and Control-Meta-2 to	1192	=item builtin-string:
1224	the fonts C<suxuseuro> and C<9x15bold>, so you can have some limited
1225	font-switching at runtime:
1226		1193
1227	URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007	1194	This action is mainly useful to restore string mappings for keys that
1228	URxvt.keysym.M-C-2: command:\033]50;9x15bold\007	1195	have predefined actions in @@RXVT_NAME@@. The exact semantics are a bit
		1196	difficult to explain - basically, this action will send the string to the
		1197	application that would be sent if @@RXVT_NAME@@ wouldn't have a built-in
		1198	action for it.
1229		1199
1230	Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more	1200	An example might make it clearer: @@RXVT_NAME@@ normally pastes the
1231	info):	1201	selection when you press C<Shift-Insert>. With the following bindings, it
		1202	would instead emit the (undocumented, but what applications running in the
		1203	terminal might expect) sequence C<ESC [ 2 $> instead:
1232		1204
1233	URxvt.keysym.M-C-3: command:\033[8;25;80t	1205	URxvt.keysym.S-Insert: builtin-string:
1234	URxvt.keysym.M-C-4: command:\033[8;48;110t	1206	URxvt.keysym.C-S-Insert: builtin:
		1207
		1208	The first line disables the paste functionality for that key
		1209	combination, and the second reinstates the default behaviour for
		1210	C<Control-Shift-Insert>, which would otherwise be overridden.
		1211
		1212	Similarly, to let applications gain access to the C<C-M-c> (copy to
		1213	clipboard) and C<C-M-v> (paste clipboard) key combination, you can do
		1214	this:
		1215
		1216	URxvt.keysym.C-M-c: builtin-string:
		1217	URxvt.keysym.C-M-v: builtin-string:
		1218
		1219	=item EXTENSION:STRING
		1220
		1221	An action of this form invokes the action B<STRING>, if any, provided
		1222	by the @@RXVT_NAME@@perl(3) extension B<EXTENSION>. The extension will
		1223	be loaded automatically if necessary.
		1224
		1225	Not all extensions define actions, but popular extensions that do
		1226	include the I<selection> and I<matcher> extensions (documented in their
		1227	own manpages, @@RXVT_NAME@@-selection(1) and @@RXVT_NAME@@-matcher(1),
		1228	respectively).
		1229
		1230	From the silly examples department, this will rot13-"encrypt"
		1231	@@RXVT_NAME@@'s selection when Alt-Control-c is pressed on typical PC
		1232	keyboards:
		1233
		1234	URxvt.keysym.M-C-c: selection:rot13
		1235
		1236	=item perl:STRING DEPRECATED
		1237
		1238	This is a deprecated way of invoking commands provided by perl
		1239	extensions. It is still supported, but should not be used anymore.
		1240
		1241	=back
1235		1242
1236	=item B<perl-ext-common>: I<string>	1243	=item B<perl-ext-common>: I<string>
1237		1244
1238	=item B<perl-ext>: I<string>	1245	=item B<perl-ext>: I<string>
1239		1246
…		…
1241	use in this terminal instance; option B<-pe>.	1248	use in this terminal instance; option B<-pe>.
1242		1249
1243	Extension names can be prefixed with a C<-> sign to prohibit using	1250	Extension names can be prefixed with a C<-> sign to prohibit using
1244	them. This can be useful to selectively disable some extensions loaded	1251	them. This can be useful to selectively disable some extensions loaded
1245	by default, or specified via the C<perl-ext-common> resource. For	1252	by default, or specified via the C<perl-ext-common> resource. For
1246	example, C<default,-selection> will use all the default extension except	1253	example, C<default,-selection> will use all the default extensions except
1247	C<selection>.	1254	C<selection>.
1248		1255
1249	Extension names can also be followed by an argument in angle brackets	1256	The default set includes the C<selection>, C<option-popup>,
1250	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for	1257	C<selection-popup>, C<readline> and C<searchable-scrollback>
1251	searchable scrollback to Alt/Meta-s). Mentioning the same extension	1258	extensions, and extensions which are mentioned in B<keysym> resources.
1252	multiple times with different arguments will pass multiple arguments to	1259
1253	the extension.	1260	Any extension such that a corresponding resource is given on the
		1261	command line is automatically appended to B<perl-ext>.
1254		1262
1255	Each extension is looked up in the library directories, loaded if	1263	Each extension is looked up in the library directories, loaded if
1256	necessary, and bound to the current terminal instance.	1264	necessary, and bound to the current terminal instance. When the library
		1265	search path contains multiple extension files of the same name, then the
		1266	first one found will be used.
1257		1267
1258	If both of these resources are the empty string, then the perl	1268	If both of these resources are the empty string, then the perl interpreter
1259	interpreter will not be initialized. The idea behind two options is that	1269	will not be initialized. The rationale for having two options is that
1260	B<perl-ext-common> will be used for extensions that should be available to	1270	B<perl-ext-common> will be used for extensions that should be available to
1261	all instances, while B<perl-ext> is used for specific instances.	1271	all instances, while B<perl-ext> is used for specific instances.
1262		1272
1263	=item B<perl-eval>: I<string>	1273	=item B<perl-eval>: I<string>
1264		1274
…		…
1266	the @@RXVT_NAME@@perl(3) manpage.	1276	the @@RXVT_NAME@@perl(3) manpage.
1267		1277
1268	=item B<perl-lib>: I<path>	1278	=item B<perl-lib>: I<path>
1269		1279
1270	Colon-separated list of additional directories that hold extension	1280	Colon-separated list of additional directories that hold extension
1271	scripts. When looking for extensions specified by the C<perl> resource,	1281	scripts. When looking for perl extensions, @@RXVT_NAME@@ will first look
1272	@@RXVT_NAME@@ will first look in these directories and then in	1282	in these directories, then in C<$URXVT_PERL_LIB>, F<$HOME/.urxvt/ext> and
1273	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1283	lastly in F<@@RXVT_LIBDIR@@/urxvt/perl/>.
1274		1284
1275	See the @@RXVT_NAME@@perl(3) manpage.	1285	See the @@RXVT_NAME@@perl(3) manpage.
1276		1286
1277	=item B<< selection.pattern-I<idx> >>: I<perl-regex>	1287	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
1278		1288
…		…
1282	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>	1292	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
1283		1293
1284	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage	1294	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
1285	for details.	1295	for details.
1286		1296
1287	=item B<searchable-scrollback:> I<keysym>	1297	=item B<searchable-scrollback:> I<keysym> DEPRECATED
1288		1298
1289	Sets the hotkey that starts the incremental scrollback buffer search	1299	This resource is deprecated and will be removed. Use a B<keysym> resource
1290	(default: C<M-s>).	1300	instead, e.g.:
1291		1301
		1302	URxvt.keysym.M-s: searchable-scrollback:start
		1303
1292	=item B<urlLauncher>: I<string>	1304	=item B<url-launcher>: I<string>
1293		1305
1294	Specifies the program to be started with a URL argument. Used by the	1306	Specifies the program to be started with a URL argument. Used by the
1295	C<selection-popup> and C<matcher> perl extensions.	1307	C<selection-popup> and C<matcher> perl extensions.
1296		1308
1297	=item B<transient-for>: I<windowid>	1309	=item B<transient-for>: I<windowid>
…		…
1308	Turn on/off ISO 14755 (default enabled).	1320	Turn on/off ISO 14755 (default enabled).
1309		1321
1310	=item B<iso14755_52:> I<boolean>	1322	=item B<iso14755_52:> I<boolean>
1311		1323
1312	Turn on/off ISO 14755 5.2 mode (default enabled).	1324	Turn on/off ISO 14755 5.2 mode (default enabled).
		1325
		1326	=back
		1327
		1328	=head1 BACKGROUND IMAGE OPTIONS AND RESOURCES
		1329
		1330	=over 4
		1331
		1332	=item B<-pixmap> I<file[;oplist]>
		1333
		1334	=item B<backgroundPixmap:> I<file[;oplist]>
		1335
		1336	Compile I<pixbuf>: Use the specified image file as the window's
		1337	background and also optionally specify a colon separated list of
		1338	operations to modify it. Note that you may need to quote the C<;>
		1339	character when using the command line option, as C<;> is usually a
		1340	metacharacter in shells. Supported operations are:
		1341
		1342	=over 4
		1343
		1344	=item B<WxH+X+Y>
		1345
		1346	sets scale and position. B<"W" / "H"> specify the horizontal/vertical
		1347	scale (percent), and B<"X" / "Y"> locate the image centre (percent). A
		1348	scale of 0 disables scaling.
		1349
		1350	=item B<op=tile>
		1351
		1352	enables tiling
		1353
		1354	=item B<op=keep-aspect>
		1355
		1356	maintain the image aspect ratio when scaling
		1357
		1358	=item B<op=root-align>
		1359
		1360	use the position of the terminal window relative to the root window as
		1361	the image offset, simulating a root window background
		1362
		1363	=back
		1364
		1365	The default scale and position setting is C<100x100+50+50>.
		1366	Alternatively, a predefined set of templates can be used to achieve
		1367	the most common setups:
		1368
		1369	=over 4
		1370
		1371	=item B<style=tiled>
		1372
		1373	the image is tiled with no scaling. Equivalent to 0x0+0+0:op=tile
		1374
		1375	=item B<style=aspect-stretched>
		1376
		1377	the image is scaled to fill the whole window maintaining the aspect
		1378	ratio and centered. Equivalent to 100x100+50+50:op=keep-aspect
		1379
		1380	=item B<style=stretched>
		1381
		1382	the image is scaled to fill the whole window. Equivalent to 100x100
		1383
		1384	=item B<style=centered>
		1385
		1386	the image is centered with no scaling. Equivalent to 0x0+50+50
		1387
		1388	=item B<style=root-tiled>
		1389
		1390	the image is tiled with no scaling and using 'root' positioning.
		1391	Equivalent to 0x0:op=tile:op=root-align
		1392
		1393	=back
		1394
		1395	If multiple templates are specified the last one wins. Note that a
		1396	template overrides all the scale, position and operations settings.
		1397
		1398	If used in conjunction with pseudo-transparency, the specified pixmap
		1399	will be blended over the transparent background using alpha-blending.
		1400
		1401	=item B<-tr>\|B<+tr>
		1402
		1403	=item B<transparent:> I<boolean>
		1404
		1405	Turn on/off pseudo-transparency by using the root pixmap as background.
		1406
		1407	B<-ip> (B<inheritPixmap>) is still accepted as an obsolete alias but
		1408	will be removed in future versions.
		1409
		1410	=item B<-tint> I<colour>
		1411
		1412	=item B<tintColor:> I<colour>
		1413
		1414	Tint the transparent background with the given colour. Note that a
		1415	black tint yields a completely black image while a white tint yields
		1416	the image unchanged.
		1417
		1418	=item B<-sh> I<number>
		1419
		1420	=item B<shading:> I<number>
		1421
		1422	Darken (0 .. 99) or lighten (101 .. 200) the transparent background.
		1423	A value of 100 means no shading.
		1424
		1425	=item B<-blr> I<HxV>
		1426
		1427	=item B<blurRadius:> I<HxV>
		1428
		1429	Apply gaussian blur with the specified radius to the transparent
		1430	background. If a single number is specified, the vertical and
		1431	horizontal radii are considered to be the same. Setting one of the
		1432	radii to 1 and the other to a large number creates interesting effects
		1433	on some backgrounds. The maximum radius value is 128. An horizontal or
		1434	vertical radius of 0 disables blurring.
		1435
		1436	=item B<path:> I<path>
		1437
		1438	Specify the colon-delimited search path for finding background image files.
1313		1439
1314	=back	1440	=back
1315		1441
1316	=head1 THE SCROLLBAR	1442	=head1 THE SCROLLBAR
1317		1443
…		…
1365	window causes the value of the PRIMARY selection (or CLIPBOARD with the	1491	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1366	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.	1492	B<Meta> modifier) to be inserted as if it had been typed on the keyboard.
1367		1493
1368	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be	1494	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
1369	inserted too.	1495	inserted too.
		1496
		1497	rxvt-unicode also provides the bindings B<Ctrl-Meta-c> and
		1498	<Ctrl-Meta-v> to interact with the CLIPBOARD selection. The first
		1499	binding causes the value of the internal selection to be copied to the
		1500	CLIPBOARD selection, while the second binding causes the value of the
		1501	CLIPBOARD selection to be inserted.
1370		1502
1371	=back	1503	=back
1372		1504
1373	=head1 CHANGING FONTS	1505	=head1 CHANGING FONTS
1374		1506
…		…
1463	In addition to the default foreground and background colours,	1595	In addition to the default foreground and background colours,
1464	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus	1596	B<@@RXVT_NAME@@> can display up to 88/256 colours: 8 ANSI colours plus
1465	high-intensity (potentially bold/blink) versions of the same, and 72 (or	1597	high-intensity (potentially bold/blink) versions of the same, and 72 (or
1466	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB	1598	240 in 256 colour mode) colours arranged in an 4x4x4 (or 6x6x6) colour RGB
1467	cube plus a 8 (24) colour greyscale ramp.	1599	cube plus a 8 (24) colour greyscale ramp.
		1600
		1601	B<@@RXVT_NAME@@> supports direct 24-bit fg/bg RGB colour escapes
		1602	C< ESC [ 38 ; 2 ; R ; G ; Bm > / C< ESC [ 48 ; 2; R ; G ; Bm >. However the
		1603	number of 24-bit colours that can be used is limited: an internal 7x7x5 (256
		1604	colour mode) or 6x6x4 (88 colour mode) colour cube is used to index into the
		1605	24-bit colour space. When indexing collisions happen, the nearest old colour in
		1606	the cube will be adapted to the new 24-bit RGB colour. That means one cannot
		1607	use many similar 24-bit colours. It's typically not a problem in common
		1608	scenarios.
1468		1609
1469	Here is a list of the ANSI colours with their names.	1610	Here is a list of the ANSI colours with their names.
1470		1611
1471	=begin table	1612	=begin table
1472		1613
…		…
1499	The following text gives values for the standard 88 colour mode (and	1640	The following text gives values for the standard 88 colour mode (and
1500	values for the 256 colour mode in parentheses).	1641	values for the 256 colour mode in parentheses).
1501		1642
1502	The RGB cube uses indices 16..79 (16..231) using the following formulas:	1643	The RGB cube uses indices 16..79 (16..231) using the following formulas:
1503		1644
1504	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3	1645	index_88 = (r * 4 + g) * 4 + b + 16 # r, g, b = 0..3
1505	index_256 = (r * 16 + g) * 16 + b + 16 # r, g, b = 0..15	1646	index_256 = (r * 6 + g) * 6 + b + 16 # r, g, b = 0..5
1506		1647
1507	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%	1648	The grayscale ramp uses indices 80..87 (232..239), from 10% to 90% in 10%
1508	steps (1/26 to 25/26 in 1/26 steps).	1649	steps (1/26 to 25/26 in 1/26 steps) - black and white are already part of
		1650	the RGB cube.
1509		1651
1510	Together, all those colours implement the 88 (256) colour xterm	1652	Together, all those colours implement the 88 (256) colour xterm
1511	colours. Only the first 16 can be changed using resources currently, the	1653	colours. Only the first 16 can be changed using resources currently, the
1512	rest can only be changed via command sequences ("escape codes").	1654	rest can only be changed via command sequences ("escape codes").
		1655
		1656	Applications are advised to use terminfo or command sequences to discover
		1657	number and RGB values of all colours (yes, you can query this...).
1513		1658
1514	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by	1659	Note that B<-rv> (B<"reverseVideo: True">) simulates reverse video by
1515	always swapping the foreground/background colours. This is in contrast to	1660	always swapping the foreground/background colours. This is in contrast to
1516	I<xterm>(1) where the colours are only swapped if they have not otherwise	1661	I<xterm>(1) where the colours are only swapped if they have not otherwise
1517	been specified. For example,	1662	been specified. For example,
…		…
1522	White.	1667	White.
1523		1668
1524	=head2 ALPHA CHANNEL SUPPORT	1669	=head2 ALPHA CHANNEL SUPPORT
1525		1670
1526	If Xft support has been compiled in and as long as Xft/Xrender/X don't get	1671	If Xft support has been compiled in and as long as Xft/Xrender/X don't get
1527	their act together, rxvt-unicode will do it's own alpha channel management:	1672	their act together, rxvt-unicode will do its own alpha channel management:
1528		1673
1529	You can prefix any colour with an opaquenes percentage enclosed in	1674	You can prefix any colour with an opaqueness percentage enclosed in
1530	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage	1675	brackets, i.e. C<[percent]>, where C<percent> is a decimal percentage
1531	(0-100) that specifies the opacity of the colour, where C<0> is completely	1676	(0-100) that specifies the opacity of the colour, where C<0> is completely
1532	transparent and C<100> is completely opaque. For example, C<[50]red> is a	1677	transparent and C<100> is completely opaque. For example, C<[50]red> is a
1533	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This	1678	half-transparent red, while C<[95]#00ff00> is an almost opaque green. This
1534	is the recommended format to specify transparency values, and works with	1679	is the recommended format to specify transparency values, and works with
…		…
1614		1759
1615	=item B<SHELL>	1760	=item B<SHELL>
1616		1761
1617	The shell to be used for command execution, defaults to C</bin/sh>.	1762	The shell to be used for command execution, defaults to C</bin/sh>.
1618		1763
1619	=item B<RXVT_SOCKET>	1764	=item B<RXVT_SOCKET> [I<sic>]
1620		1765
1621	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1766	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1622	@@RXVT_NAME@@d(1).	1767	@@RXVT_NAME@@d(1).
1623		1768
1624	Default F<<< $HOME/.rxvt-unicode-I<< <nodename >> >>>.	1769	Default F<<< $HOME/.urxvt/urxvtd-I<< <nodename> >> >>>.
		1770
		1771	=item B<URXVT_PERL_LIB>
		1772
		1773	Additional F<:>-separated library search path for perl extensions. Will be
		1774	searched after B<-perl-lib> but before F<~/.urxvt/ext> and the system library
		1775	directory.
		1776
		1777	=item B<URXVT_PERL_VERBOSITY>
		1778
		1779	See L<@@RXVT_NAME@@perl>(3).
1625		1780
1626	=item B<HOME>	1781	=item B<HOME>
1627		1782
1628	Used to locate the default directory for the unix domain socket for	1783	Used to locate the default directory for the unix domain socket for
1629	daemon communications and to locate various resource files (such as	1784	daemon communications and to locate various resource files (such as
1630	C<.Xdefaults>)	1785	C<.Xdefaults>)
1631		1786
1632	=item B<XAPPLRESDIR>	1787	=item B<XAPPLRESDIR>
1633		1788
1634	Directory where various X resource files are being located.	1789	Directory where application-specific X resource files are located.
1635		1790
1636	=item B<XENVIRONMENT>	1791	=item B<XENVIRONMENT>
1637		1792
1638	If set and accessible, gives the name of a X resource file to be loaded by	1793	If set and accessible, gives the name of a X resource file to be loaded by
1639	@@RXVT_NAME@@.	1794	@@RXVT_NAME@@.
…		…
1650		1805
1651	=back	1806	=back
1652		1807
1653	=head1 SEE ALSO	1808	=head1 SEE ALSO
1654		1809
		1810	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), @@RXVT_NAME@@-extensions(1),
1655	@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)	1811	@@RXVT_NAME@@perl(3), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5)
1656		1812
1657	=head1 CURRENT PROJECT COORDINATOR	1813	=head1 CURRENT PROJECT COORDINATOR
1658		1814
1659	=over 4	1815	=over 4
1660		1816
1661	=item Project Coordinator	1817	=item Project Coordinator
1662		1818
1663	Marc A. Lehmann L<< <rxvt-unicode@schmorp.de> >>	1819	Marc A. Lehmann <rxvt-unicode@schmorp.de>.
1664		1820
1665	L<http://software.schmorp.de/pkg/rxvt-unicode.html>	1821	L<http://software.schmorp.de/pkg/rxvt-unicode.html>
1666		1822
1667	=back	1823	=back
1668		1824
…		…
1672		1828
1673	=item John Bovey	1829	=item John Bovey
1674		1830
1675	University of Kent, 1992, wrote the original Xvt.	1831	University of Kent, 1992, wrote the original Xvt.
1676		1832
1677	=item Rob Nation L<< <nation@rocket.sanders.lockheed.com> >>	1833	=item Rob Nation <nation@rocket.sanders.lockheed.com>
1678		1834
1679	very heavily modified Xvt and came up with Rxvt	1835	very heavily modified Xvt and came up with Rxvt
1680		1836
1681	=item Angelo Haritsis L<< <ah@doc.ic.ac.uk> >>	1837	=item Angelo Haritsis <ah@doc.ic.ac.uk>
1682		1838
1683	wrote the Greek Keyboard Input (no longer in code)	1839	wrote the Greek Keyboard Input (no longer in code)
1684		1840
1685	=item mj olesen L<< <olesen@me.QueensU.CA> >>	1841	=item mj olesen <olesen@me.QueensU.CA>
1686		1842
1687	Wrote the menu system.	1843	Wrote the menu system.
1688		1844
1689	Project Coordinator (changes.txt 2.11 to 2.21)	1845	Project Coordinator (changes.txt 2.11 to 2.21)
1690		1846
1691	=item Oezguer Kesim L<< <kesim@math.fu-berlin.de> >>	1847	=item Oezguer Kesim <kesim@math.fu-berlin.de>
1692		1848
1693	Project Coordinator (changes.txt 2.21a to 2.4.5)	1849	Project Coordinator (changes.txt 2.21a to 2.4.5)
1694		1850
1695	=item Geoff Wing L<< <gcw@pobox.com> >>	1851	=item Geoff Wing <gcw@pobox.com>
1696		1852
1697	Rewrote screen display and text selection routines.	1853	Rewrote screen display and text selection routines.
1698		1854
1699	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)	1855	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1700		1856
1701	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1857	=item Marc Alexander Lehmann <rxvt-unicode@schmorp.de>
1702		1858
1703	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl	1859	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1704	extension, random hacks, numerous bugfixes and extensions.	1860	extension, random hacks, numerous bugfixes and extensions.
1705		1861
1706	Project Coordinator (Changes 1.0 -)	1862	Project Coordinator (Changes 1.0 -)
1707		1863
1708	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>	1864	=item Emanuele Giaquinta <emanuele.giaquinta@gmail.com>
1709		1865
1710	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.	1866	pty/utmp code rewrite, image code improvements, many random hacks and bugfixes.
1711		1867
1712	=back	1868	=back
1713		1869

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.178 by root, Sun May 23 01:05:01 2010 UTC vs. Revision 1.246 by sf-exg, Tue Jun 21 12:03:55 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.178 by root, Sun May 23 01:05:01 2010 UTC vs.
Revision 1.246 by sf-exg, Tue Jun 21 12:03:55 2016 UTC