[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.1.pod

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.82 by root, Tue Jan 3 18:11:34 2006 UTC vs.
Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC

…		…
172	resource B<borderColor>.	172	resource B<borderColor>.
173		173
174	=item B<-fn> I<fontlist>	174	=item B<-fn> I<fontlist>
175		175
176	Select the fonts to be used. This is a comma separated list of font names	176	Select the fonts to be used. This is a comma separated list of font names
177	that are used in turn when trying to display Unicode characters. The	177	that are checked in order when trying to find glyphs for characters. The
178	first font defines the cell size for characters; other fonts might be	178	first font defines the cell size for characters; other fonts might be
179	smaller, but not (in general) larger. A (hopefully) reasonable default	179	smaller, but not (in general) larger. A (hopefully) reasonable default
180	font list is always appended to it. See resource B<font> for more details.	180	font list is always appended to it. See resource B<font> for more details.
181		181
182	In short, to specify an X11 core font, just specify it's name or prefix it	182	In short, to specify an X11 core font, just specify it's name or prefix it
…		…
189	See also the question "How does rxvt-unicode choose fonts?" in the FAQ	189	See also the question "How does rxvt-unicode choose fonts?" in the FAQ
190	section of @@RXVT_NAME@@(7).	190	section of @@RXVT_NAME@@(7).
191		191
192	=item B<-fb> I<fontlist>	192	=item B<-fb> I<fontlist>
193		193
194	Compile font-styles: The bold font list to use when bold characters are to	194	Compile I<font-styles>: The bold font list to use when B<bold> characters
195	be printed. See resource B<boldFont> for details.	195	are to be printed. See resource B<boldFont> for details.
196		196
197	=item B<-fi> I<fontlist>	197	=item B<-fi> I<fontlist>
198		198
199	Compile font-styles: The italic font list to use when bold characters are to	199	Compile I<font-styles>: The italic font list to use when I<italic>
200	be printed. See resource B<italicFont> for details.	200	characters are to be printed. See resource B<italicFont> for details.
201		201
202	=item B<-fbi> I<fontlist>	202	=item B<-fbi> I<fontlist>
203		203
204	Compile font-styles: The bold italic font list to use when bold characters are to	204	Compile I<font-styles>: The bold italic font list to use when B<< I<bold
205	be printed. See resource B<boldItalicFont> for details.	205	italic> >> characters are to be printed. See resource B<boldItalicFont>
		206	for details.
206		207
207	=item B<-is>\|B<+is>	208	=item B<-is>\|B<+is>
208		209
209	Compile font-styles: Bold/Italic font styles imply high intensity	210	Compile I<font-styles>: Bold/Italic font styles imply high intensity
210	foreground/background (default). See resource B<intensityStyles> for	211	foreground/background (default). See resource B<intensityStyles> for
211	details.	212	details.
212		213
213	=item B<-name> I<name>	214	=item B<-name> I<name>
214		215
…		…
295	=item B<-bl>	296	=item B<-bl>
296		297
297	Compile I<frills>: Set MWM hints to request a borderless window, i.e.	298	Compile I<frills>: Set MWM hints to request a borderless window, i.e.
298	if honoured by the WM, the rxvt-unicode window will not have window	299	if honoured by the WM, the rxvt-unicode window will not have window
299	decorations; resource B<borderLess>.	300	decorations; resource B<borderLess>.
		301
		302	=item B<-override-redirect>
		303
		304	Compile I<frills>: Sets override-redirect on the window; resource
		305	B<override-redirect>.
		306
		307	=item B<-sbg>
		308
		309	Compile I<frills>: Disable the usage of the built-in block graphics/line
		310	drawing characters and just rely on what the specified fonts provide. Use
		311	this if you have a good font and want to use its block graphic glyphs;
		312	resource B<skipBuiltinGlyphs>.
300		313
301	=item B<-lsp> I<number>	314	=item B<-lsp> I<number>
302		315
303	Compile I<frills>: Lines (pixel height) to insert between each row of	316	Compile I<frills>: Lines (pixel height) to insert between each row of
304	the display. Useful to work around font rendering problems; resource	317	the display. Useful to work around font rendering problems; resource
…		…
427	$rxvt->signal_connect_after (realize => sub {	440	$rxvt->signal_connect_after (realize => sub {
428	my $xid = $_[0]->window->get_xid;	441	my $xid = $_[0]->window->get_xid;
429	system "@@RXVT_NAME@@ -embed $xid &";	442	system "@@RXVT_NAME@@ -embed $xid &";
430	});	443	});
431		444
432	=item B<-pty-fd> I<fileno>	445	=item B<-pty-fd> I<file descriptor>
433		446
434	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty	447	Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty
435	pair but instead use the given filehandle as the tty master. This is	448	pair but instead use the given filehandle as the tty master. This is
436	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator	449	useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator
437	without having to run a program within it.	450	without having to run a program within it.
438		451
439	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp	452	If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp
440	entries and will not tinker with pty/tty permissions - you have to do that	453	entries and will not tinker with pty/tty permissions - you have to do that
441	yourself if you want that.	454	yourself if you want that.
442		455
		456	As an extremely special case, specifying C<-1> will completely suppress
		457	pty/tty operations.
		458
443	Here is a example in perl that illustrates how this option can be used (a	459	Here is a example in perl that illustrates how this option can be used (a
444	longer example is in F<doc/pty-fd>):	460	longer example is in F<doc/pty-fd>):
445		461
446	use IO::Pty;	462	use IO::Pty;
447	use Fcntl;	463	use Fcntl;
…		…
455	my $slave = $pty->slave;	471	my $slave = $pty->slave;
456	while (<$slave>) { print $slave "got <$_>\n" }	472	while (<$slave>) { print $slave "got <$_>\n" }
457		473
458	=item B<-pe> I<string>	474	=item B<-pe> I<string>
459		475
460	Colon-separated list of perl extension scripts to use in this terminal instance. See resource B<perl-ext>.	476	Comma-separated list of perl extension scripts to use (or not to use) in
		477	this terminal instance. See resource B<perl-ext> for details.
461		478
462	=back	479	=back
463		480
464	=head1 RESOURCES (available also as long-options)	481	=head1 RESOURCES (available also as long-options)
465		482
466	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long	483	Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long
467	options) compiled into your version.	484	options) compiled into your version.
468		485
469	There are two different methods that @@RXVT_NAME@@ can use to get the	486	You can set and change the resources using X11 tools like B<xrdb>. Many
470	Xresource data: using the X libraries (Xrm*-functions) or internal	487	distribution do also load settings from the B<~/.Xresources> file when X
471	Xresources reader (B<~/.Xdefaults>). For the first method (ie.	488	starts. @@RXVT_NAME@@ will consult the following files/resources in order,
472	B<@@RXVT_NAME@@ -h> lists B<XGetDefaults>), you can set and change the	489	with later settings overwriting earlier ones:
473	resources using X11 tools like B<xrdb>. Many distribution do also load
474	settings from the B<~/.Xresources> file when X starts. @@RXVT_NAME@@
475	will consult the following files/resources in order, with later settings
476	overwriting earlier ones:
477		490
478	1. system-wide app-defaults file, either locale-dependent OR global	491	1. system-wide app-defaults file, either locale-dependent OR global
479	2. app-defaults file in $XAPPLRESDIR	492	2. app-defaults file in $XAPPLRESDIR
480	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults	493	3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults
481	4. SCREEN_RESOURCES for the current screen	494	4. SCREEN_RESOURCES for the current screen
482	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>	495	5. $XENVIRONMENT file OR $HOME/.Xdefaults-<nodename>
483		496
484	If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h>
485	lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults
486	set in XAPPLOADDIR/URxvt (compile-time defined: usually
487	B</usr/lib/X11/app-defaults/URxvt>) and resources set in
488	B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist.
489	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two	497	Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class
490	class names: B<XTerm> and B<URxvt>. The class name B<Rxvt> allows	498	names: B<Rxvt> and B<URxvt>. The class name B<Rxvt> allows resources
491	resources common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be	499	common to both B<@@RXVT_NAME@@> and the original I<rxvt> to be easily
492	easily configured, while the class name B<URxvt> allows resources	500	configured, while the class name B<URxvt> allows resources unique to
493	unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be	501	B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@>
494	shared between different B<@@RXVT_NAME@@> configurations. If no	502	configurations. If no resources are specified, suitable defaults will
495	resources are specified, suitable defaults will be used. Command-line	503	be used. Command-line arguments can be used to override resource
496	arguments can be used to override resource settings. The following	504	settings. The following resources are supported (you might want to
497	resources are allowed:	505	check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl
		506	extensions not documented here):
498		507
499	=over 4	508	=over 4
500		509
501	=item B<geometry:> I<geom>	510	=item B<geometry:> I<geom>
502		511
…		…
623	of 1 displays the image without any scaling. A scale of 2 to 9	632	of 1 displays the image without any scaling. A scale of 2 to 9
624	specifies an integer number of images in that direction. No image will	633	specifies an integer number of images in that direction. No image will
625	be magnified beyond 10 times its original size. The maximum permitted	634	be magnified beyond 10 times its original size. The maximum permitted
626	scale is 1000. [default 0x0+50+50]	635	scale is 1000. [default 0x0+50+50]
627		636
628	=item B<menu:> I<file[;tag]>
629
630	Read in the specified menu file (note the `.menu' extension is
631	optional) and also optionally specify a starting tag to find. See the
632	reference documentation for details on the syntax for the menuBar.
633
634	=item B<path:> I<path>	637	=item B<path:> I<path>
635		638
636	Specify the colon-delimited search path for finding files (XPM and	639	Specify the colon-delimited search path for finding XPM files.
637	menus), in addition to the paths specified by the B<RXVTPATH> and
638	B<PATH> environment variables.
639		640
640	=item B<font:> I<fontlist>	641	=item B<font:> I<fontlist>
641		642
642	Select the fonts to be used. This is a comma separated list of font	643	Select the fonts to be used. This is a comma separated list of font names
643	names that are used in turn when trying to display Unicode characters.	644	that are checked in order when trying to find glyphs for characters. The
644	The first font defines the cell size for characters; other fonts might	645	first font defines the cell size for characters; other fonts might be
645	be smaller, but not larger. A reasonable default font list is always	646	smaller, but not (in general) larger. A (hopefully) reasonable default
646	appended to it; option B<-fn>.	647	font list is always appended to it; option B<-fn>.
647		648
648	Each font can either be a standard X11 core font (XLFD) name, with	649	Each font can either be a standard X11 core font (XLFD) name, with
649	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.	650	optional prefix C<x:> or a Xft font (Compile I<xft>), prefixed with C<xft:>.
650		651
651	In addition, each font can be prefixed with additional hints and	652	In addition, each font can be prefixed with additional hints and
…		…
653	hint currently is C<codeset=codeset-name>, and this is only used for Xft	654	hint currently is C<codeset=codeset-name>, and this is only used for Xft
654	fonts.	655	fonts.
655		656
656	For example, this font resource	657	For example, this font resource
657		658
658	URxvt*font: 9x15bold,\	659	URxvt.font: 9x15bold,\
659	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\	660	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
660	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \	661	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
661	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \	662	[codeset=JISX0208]xft:Kochi Gothic:antialias=false, \
662	xft:Code2000:antialias=false	663	xft:Code2000:antialias=false
663		664
…		…
760		761
761	The string will be interpreted as if typed into the shell as-is.	762	The string will be interpreted as if typed into the shell as-is.
762		763
763	Example:	764	Example:
764		765
765	URxvt*print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)	766	URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX)
766		767
767	This creates a new file in your home directory with the screen contents	768	This creates a new file in your home directory with the screen contents
768	everytime you hit C<Print>.	769	everytime you hit C<Print>.
769		770
770	=item B<scrollBar:> I<boolean>	771	=item B<scrollBar:> I<boolean>
…		…
824	=item B<borderLess:> I<boolean>	825	=item B<borderLess:> I<boolean>
825		826
826	Set MWM hints to request a borderless window, i.e. if honoured by the	827	Set MWM hints to request a borderless window, i.e. if honoured by the
827	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.	828	WM, the rxvt-unicode window will not have window decorations; option B<-bl>.
828		829
		830	=item B<skipBuiltinGlyphs:> I<boolean>
		831
		832	Compile I<frills>: Disable the usage of the built-in block graphics/line
		833	drawing characters and just rely on what the specified fonts provide. Use
		834	this if you have a good font and want to use its block graphic glyphs;
		835	option B<-sbg>.
		836
829	=item B<termName:> I<termname>	837	=item B<termName:> I<termname>
830		838
831	Specifies the terminal type name to be set in the B<TERM> environment	839	Specifies the terminal type name to be set in the B<TERM> environment
832	variable; option B<-tn>.	840	variable; option B<-tn>.
833		841
…		…
888	pressed. If unset it will send the sequence traditionally associated	896	pressed. If unset it will send the sequence traditionally associated
889	with the B<Execute> key.	897	with the B<Execute> key.
890		898
891	=item B<cutchars:> I<string>	899	=item B<cutchars:> I<string>
892		900
893	The characters used as delimiters for double-click word selection. The	901	The characters used as delimiters for double-click word selection.
894	built-in default:	902
		903	When the selection extension is in use (the default if compiled in, see
		904	the @@RXVT_NAME@@perl(3) manpage), a suitable regex using these characters
		905	will be created (if the resource exists, otherwise, no regex will be
		906	created). In this mode, characters outside ISO-8859-1 can be used.
		907
		908	When the selection extension is not used, only ISO-8859-1 characters can
		909	be used. If not specified, the built-in default is used:
895		910
896	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>	911	B<< BACKSLASH `"'&()*,;<=>?@[]{\|} >>
897		912
898	=item B<preeditType:> I<style>	913	=item B<preeditType:> I<style>
899		914
…		…
935	default. (Note that many other terminals, including xterm, have these	950	default. (Note that many other terminals, including xterm, have these
936	sequences enabled by default, which doesn't make it safer, though).	951	sequences enabled by default, which doesn't make it safer, though).
937		952
938	You can enable them by setting this boolean resource or specifying	953	You can enable them by setting this boolean resource or specifying
939	B<-insecure> as an option. At the moment, this enables display-answer,	954	B<-insecure> as an option. At the moment, this enables display-answer,
940	locale, findfont, icon label and window title requests as well as dynamic	955	locale, findfont, icon label and window title requests.
941	menubar dispatch.
942		956
943	=item B<modifier:> I<modifier>	957	=item B<modifier:> I<modifier>
944		958
945	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,	959	Set the key to be interpreted as the Meta key to: B<alt>, B<meta>,
946	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option	960	B<hyper>, B<super>, B<mod1>, B<mod2>, B<mod3>, B<mod4>, B<mod5>; option
…		…
950		964
951	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)	965	Specify the reply rxvt-unicode sends to the shell when an ENQ (control-E)
952	character is passed through. It may contain escape values as described	966	character is passed through. It may contain escape values as described
953	in the entry on B<keysym> following.	967	in the entry on B<keysym> following.
954		968
955	=item B<secondaryScreen:> I<bool>	969	=item B<secondaryScreen:> I<boolean>
956		970
957	Turn on/off secondary screen (default enabled).	971	Turn on/off secondary screen (default enabled).
958		972
959	=item B<secondaryScroll:> I<bool>	973	=item B<secondaryScroll:> I<boolean>
960		974
961	Turn on/off secondary screen scroll (default enabled). If the this	975	Turn on/off secondary screen scroll (default enabled). If the this
962	option is enabled, scrolls on the secondary screen will change the	976	option is enabled, scrolls on the secondary screen will change the
963	scrollback buffer and switching to/from the secondary screen will	977	scrollback buffer and switching to/from the secondary screen will
964	instead scroll the screen up.	978	instead scroll the screen up.
965		979
966	=item B<hold>: I<bool>	980	=item B<hold>: I<boolean>
967		981
968	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@	982	Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@
969	will not immediately destroy its window when the program executed within	983	will not immediately destroy its window when the program executed within
970	it exits. Instead, it will wait till it is being killed or closed by the	984	it exits. Instead, it will wait till it is being killed or closed by the
971	user.	985	user.
…		…
996	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,	1010	C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab,
997	C<\000>: octal number) or verbatim control characters (C<^?>: delete,	1011	C<\000>: octal number) or verbatim control characters (C<^?>: delete,
998	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it	1012	C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it
999	can start or end with whitespace.	1013	can start or end with whitespace.
1000		1014
1001	Please note that you need to double the C<\> when using	1015	Please note that you need to double the C<\> in resource files, as
1002	C<--enable-xgetdefault>, as X itself does it's own de-escaping (you can	1016	Xlib itself does it's own de-escaping (you can use C<\033> instead of
1003	use C<\033> instead of C<\e> (and so on), which will work with both Xt and	1017	C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own
1004	@@RXVT_NAME@@'s own processing).	1018	processing).
1005		1019
1006	You can define a range of keysyms in one shot by providing a I<string>	1020	You can define a range of keysyms in one shot by providing a I<string>
1007	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'	1021	with pattern B<list/PREFIX/MIDDLE/SUFFIX>, where the delimeter `/'
1008	should be a character not used by the strings.	1022	should be a character not used by the strings.
1009		1023
…		…
1061	info):	1075	info):
1062		1076
1063	URxvt.keysym.M-C-3: command:\033[8;25;80t	1077	URxvt.keysym.M-C-3: command:\033[8;25;80t
1064	URxvt.keysym.M-C-4: command:\033[8;48;110t	1078	URxvt.keysym.M-C-4: command:\033[8;48;110t
1065		1079
		1080	=item B<perl-ext-common>: I<string>
		1081
1066	=item B<perl-ext>: I<string>	1082	=item B<perl-ext>: I<string>
1067		1083
1068	Colon-separated list of perl extension scripts to use in this terminal	1084	Comma-separated list(s) of perl extension scripts (default: C<default>) to
		1085	use in this terminal instance; option B<-pe>.
		1086
		1087	Extension names can be prefixed with a C<-> sign to prohibit using
		1088	them. This can be useful to selectively disable some extensions loaded
		1089	by default, or specified via the C<perl-ext-common> resource. For
		1090	example, C<default,-selection> will use all the default extension except
		1091	C<selection>.
		1092
		1093	Extension names can also be followed by an argument in angle brackets
		1094	(e.g. C<< searchable-scrollback<M-s> >>, which binds the hotkey for
		1095	searchable scorllback to Alt/Meta-s). Mentioning the same extension
		1096	multiple times with different arguments will pass multiple arguments to
		1097	the extension.
		1098
1069	instance. Each extension is looked up in the library directories, loaded	1099	Each extension is looked up in the library directories, loaded if
1070	if necessary, and bound to the current terminal instance. If this resource	1100	necessary, and bound to the current terminal instance.
1071	is empty or missing, then the perl interpreter will not be initialized;	1101
1072	option B<-pe>.	1102	If both of these resources are the empty string, then the perl
		1103	interpreter will not be initialized. The idea behind two options is that
		1104	B<perl-ext-common> will be used for extensions that should be available to
		1105	all instances, while B<perl-ext> is used for specific instances.
1073		1106
1074	=item B<perl-eval>: I<string>	1107	=item B<perl-eval>: I<string>
1075		1108
1076	Perl code to be evaluated when all extensions have been registered. See the	1109	Perl code to be evaluated when all extensions have been registered. See
1077	@@RXVT_NAME@@perl(3) manpage.	1110	the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource
		1111	will be ignored when running setuid/setgid.
1078		1112
1079	=item B<perl-lib>: I<path>	1113	=item B<perl-lib>: I<path>
1080		1114
1081	Colon-separated list of additional directories that hold extension	1115	Colon-separated list of additional directories that hold extension
1082	scripts. When looking for extensions specified by the C<perl> resource,	1116	scripts. When looking for extensions specified by the C<perl> resource,
1083	@@RXVT_NAME@@ will first look in these directories and then in	1117	@@RXVT_NAME@@ will first look in these directories and then in
1084	F<@@RXVT_LIBDIR@@/urxvt/perl/>.	1118	F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource
		1119	will be ignored when running setuid/setgid.
1085		1120
1086	See the @@RXVT_NAME@@perl(3) manpage.	1121	See the @@RXVT_NAME@@perl(3) manpage.
		1122
		1123	=item B<< selection.pattern-I<idx> >>: I<perl-regex>
		1124
		1125	Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for
		1126	details.
		1127
		1128	=item B<< selection-autotransform.I<idx> >>: I<perl-transform>
		1129
		1130	Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage
		1131	for details.
		1132
		1133	=item B<searchable-scrollback:> I<keysym>
		1134
		1135	Sets the hotkey that starts the incremental scrollback buffer search
		1136	(default: C<M-s>).
		1137
		1138	=item B<urlLauncher>: I<string>
		1139
		1140	Specifies the program to be started with a URL argument. Used by the
		1141	C<selection-popup> and C<mark-urls> perl extensions.
		1142
		1143	=item B<transient-for>: I<windowid>
		1144
		1145	Compile I<frills>: Sets the WM_TRANSIENT_FOR property to the given window id.
		1146
		1147	=item B<override-redirect>: I<boolean>
		1148
		1149	Compile I<frills>: Sets override-redirect for the terminal window, making
		1150	it almost invisible to window managers; option B<-override-redirect>.
1087		1151
1088	=back	1152	=back
1089		1153
1090	=head1 THE SCROLLBAR	1154	=head1 THE SCROLLBAR
1091		1155
…		…
1133	selection, and trailing whitespace is visually underlined and removed from	1197	selection, and trailing whitespace is visually underlined and removed from
1134	the selection.	1198	the selection.
1135		1199
1136	=item B<Insertion>:	1200	=item B<Insertion>:
1137		1201
1138	Pressing and releasing the Middle mouse button (or B<Shift-Insert>) in	1202	Pressing and releasing the Middle mouse button in an B<@@RXVT_NAME@@>
1139	an B<@@RXVT_NAME@@> window causes the current text selection to be	1203	window causes the value of the PRIMARY selection (or CLIPBOARD with the
1140	inserted as if it had been typed on the keyboard.	1204	Meta modifier) to be inserted as if it had been typed on the keyboard.
		1205
		1206	Pressing B<Shift-Insert> causes the value of the PRIMARY selection to be
		1207	inserted too.
1141		1208
1142	=back	1209	=back
1143		1210
1144	=head1 CHANGING FONTS	1211	=head1 CHANGING FONTS
1145		1212
1146	Changing fonts (or font sizes, respectively) via the keypad is not yet	1213	Changing fonts (or font sizes, respectively) via the keypad is not yet
1147	supported in rxvt-unicode. Bug me if you need this.	1214	supported in rxvt-unicode. Bug me if you need this.
1148		1215
1149	You can, however, switch fonts at runtime using escape sequences (and	1216	You can, however, switch fonts at runtime using escape sequences, e.g.:
1150	therefore using the menubar), e.g.:
1151		1217
1152	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"	1218	printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic"
		1219
		1220	You can use keyboard shortcuts, too:
		1221
		1222	URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		1223	URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
1153		1224
1154	rxvt-unicode will automatically re-apply these fonts to the output so far.	1225	rxvt-unicode will automatically re-apply these fonts to the output so far.
1155		1226
1156	=head1 ISO 14755 SUPPORT	1227	=head1 ISO 14755 SUPPORT
1157		1228
…		…
1319		1390
1320	=item B<SHELL>	1391	=item B<SHELL>
1321		1392
1322	The shell to be used for command execution, defaults to C</bin/sh>.	1393	The shell to be used for command execution, defaults to C</bin/sh>.
1323		1394
1324	=item B<RXVTPATH>
1325
1326	The path where @@RXVT_NAME@@ looks for support files such as menu and xpm
1327	files.
1328
1329	=item B<PATH>
1330
1331	Used in the same way as C<RXVTPATH>.
1332
1333	=item B<RXVT_SOCKET>	1395	=item B<RXVT_SOCKET>
1334		1396
1335	The unix domain socket path used by @@RXVT_NAME@@c(1) and	1397	The unix domain socket path used by @@RXVT_NAME@@c(1) and
1336	@@RXVT_NAME@@d(1).	1398	@@RXVT_NAME@@d(1).
1337		1399
…		…
1406		1468
1407	Project Coordinator (changes.txt 2.21a to 2.4.5)	1469	Project Coordinator (changes.txt 2.21a to 2.4.5)
1408		1470
1409	=item Geoff Wing L<< <gcw@pobox.com> >>	1471	=item Geoff Wing L<< <gcw@pobox.com> >>
1410		1472
1411	Rewrote screen display and text selection routines. Project Coordinator	1473	Rewrote screen display and text selection routines.
		1474
1412	(changes.txt 2.4.6 - rxvt-unicode)	1475	Project Coordinator (changes.txt 2.4.6 - rxvt-unicode)
1413		1476
1414	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>	1477	=item Marc Alexander Lehmann L<< <rxvt-unicode@schmorp.de> >>
1415		1478
1416	Forked rxvt-unicode, rewrote most of the display code and internal	1479	Forked rxvt-unicode, unicode support, rewrote almost all the code, perl
1417	character handling to store text in unicode, improve xterm	1480	extension, random hacks, numerous bugfixes and extensions.
1418	compatibility and apply numerous other bugfixes and extensions.
1419		1481
1420	Project Coordinator (Changes 1.0 -)	1482	Project Coordinator (Changes 1.0 -)
1421		1483
		1484	=item Emanuele Giaquinta L<< <e.giaquinta@glauco.it> >>
		1485
		1486	Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing.
		1487
1422	=back	1488	=back
1423		1489

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents): Revision 1.82 by root, Tue Jan 3 18:11:34 2006 UTC vs. Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.1.pod (file contents):
Revision 1.82 by root, Tue Jan 3 18:11:34 2006 UTC vs.
Revision 1.104 by root, Wed Jan 25 13:24:45 2006 UTC