--- rxvt-unicode/doc/rxvt.1.pod 2004/12/01 02:29:14 1.34 +++ rxvt-unicode/doc/rxvt.1.pod 2006/01/16 15:07:27 1.97 @@ -16,8 +16,10 @@ =head1 FREQUENTLY ASKED QUESTIONS -See @@RXVT_NAME@@(7) (try C) for a list of frequently -asked questions and answer to them and some common problems. +See @@RXVT_NAME@@(7) (try C) for a list of +frequently asked questions and answer to them and some common +problems. That document is also accessible on the World-Wide-Web at +L. =head1 RXVT-UNICODE VS. RXVT @@ -105,27 +107,37 @@ Turn on/off jump scrolling; resource B. -=item B<-ip>|B<+ip> +=item B<-ip>|B<+ip> | B<-tr>|B<+tr> Turn on/off inheriting parent window's pixmap. Alternative form is B<-tr>; resource B. =item B<-fade> I -Fade the text by the given percentage when focus is lost. +Fade the text by the given percentage when focus is lost. Small values +fade a little only, 100 completely replaces all colours by the fade +colour; resource B. + +=item B<-fadecolor> I + +Fade to this colour when fading is used (see B<-fade>). The default colour +is black. resource B. =item B<-tint> I Tint the transparent background pixmap with the given colour when -transparency is enabled with B<-tr> or B<-ip>. See also the B<-sh> -option that can be used to brighten or darken the image in addition to -tinting it. +transparency is enabled with B<-tr> or B<-ip>. This only works for +non-tiled backgrounds, currently. See also the B<-sh> option that can be +used to brighten or darken the image in addition to tinting it; resource +I. Example: + + @@RXVT_NAME@@ -tr -tint blue -sh 40 =item B<-sh> I Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image in addition to tinting it (i.e. B<-tint> must be -specified, too). +specified, too, e.g. C<-tint white>). =item B<-bg> I @@ -138,8 +150,8 @@ =item B<-pixmap> I Compile I: Specify XPM file for the background and also optionally -specify its scaling with a geometry string. Note you may need to add -quotes to avoid special shell interpretation of the `;' in the +specify its scaling with a geometry string. Note you may need to +add quotes to avoid special shell interpretation of the C<;> in the command-line; resource B. =item B<-cr> I @@ -162,7 +174,7 @@ =item B<-fn> I Select the fonts to be used. This is a comma separated list of font names -that are used in turn when trying to display Unicode characters. The +that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; other fonts might be smaller, but not (in general) larger. A (hopefully) reasonable default font list is always appended to it. See resource B for more details. @@ -179,18 +191,25 @@ =item B<-fb> I -Compile font-styles: The bold font list to use when bold characters are to -be printed. See resource B for details. +Compile I: The bold font list to use when B characters +are to be printed. See resource B for details. =item B<-fi> I -Compile font-styles: The italic font list to use when bold characters are to -be printed. See resource B for details. +Compile I: The italic font list to use when I +characters are to be printed. See resource B for details. =item B<-fbi> I -Compile font-styles: The bold italic font list to use when bold characters are to -be printed. See resource B for details. +Compile I: The bold italic font list to use when B<< I >> characters are to be printed. See resource B +for details. + +=item B<-is>|B<+is> + +Compile I: Bold/Italic font styles imply high intensity +foreground/background (default). See resource B for +details. =item B<-name> I @@ -238,7 +257,7 @@ =item B<-st>|B<+st> -Display normal (non XTerm/NeXT) scrollbar without/with a trough; +Display rxvt (non XTerm/NeXT) scrollbar without/with a trough; resource B. =item B<-ptab>|B<+ptab> @@ -280,10 +299,18 @@ if honoured by the WM, the rxvt-unicode window will not have window decorations; resource B. +=item B<-sbg> + +Compile I: Disable the usage of the built-in block graphics/line +drawing characters and just rely on what the specified fonts provide. Use +this if you have a good font and want to use its block graphic glyphs; +resource B. + =item B<-lsp> I -Compile I: Lines (pixel height) to insert between each row -of the display; resource B. +Compile I: Lines (pixel height) to insert between each row of +the display. Useful to work around font rendering problems; resource +B. =item B<-tn> I @@ -302,6 +329,11 @@ run the program specified by the B environment variable or, failing that, I. +Please note that you must specify a program with arguments. If you want to +run shell commands, you have to specify the shell, like this: + + @@RXVT_NAME@@ -e sh -c "shell commands" + =item B<-title> I Window title (B<-T> still respected); the default title is the basename @@ -329,10 +361,21 @@ =item B<-imlocale> I -The locale to use for opening the IM. You can use an LC_CTYPE of e.g. -de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input -extension to be able to input japanese characters while staying in -another locale. +The locale to use for opening the IM. You can use an C of e.g. +C for normal text processing but C for the +input extension to be able to input japanese characters while staying in +another locale. resource B. + +=item B<-imfont> I + +Set the font set to use for the X Input Method, see resource B +for more info. + +=item B<-tcw> + +Change the meaning of triple-click selection with the left mouse +button. Instead of selecting a full line it will extend the selection the +end of the logical line only. resource B. =item B<-insecure> @@ -356,11 +399,77 @@ Turn on/off secondary screen scroll (default enabled); resource B. -=item B<-xrm> I +=item B<-hold>|B<+hold> + +Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ +will not immediately destroy its window when the program executed within +it exits. Instead, it will wait till it is being killed or closed by the +user; resource B. + +=item B<-keysym.>I I + +Remap a key symbol. See resource B. + +=item B<-embed> I + +Tells @@RXVT_NAME@@ to embed it's windows into an already-existing window, +which enables applications to easily embed a terminal. + +Right now, @@RXVT_NAME@@ will first unmap/map the specified window, so it +shouldn't be a top-level window. @@RXVT_NAME@@ will also reconfigure it +quite a bit, so don't expect it to keep some specific state. It's best to +create an extra subwindow for @@RXVT_NAME@@ and leave it alone. -No effect on rxvt-unicode. Simply passes through an argument to be made -available in the instance's argument list. Appears in I in -some window managers. +The window will not be destroyed when @@RXVT_NAME@@ exits. + +It might be useful to know that @@RXVT_NAME@@ will not close file +descriptors passed to it (except for stdin/out/err, of course), so you +can use file descriptors to communicate with the programs within the +terminal. This works regardless of wether the C<-embed> option was used or +not. + +Here is a short Gtk2-perl snippet that illustrates how this option can be +used (a longer example is in F): + + my $rxvt = new Gtk2::Socket; + $rxvt->signal_connect_after (realize => sub { + my $xid = $_[0]->window->get_xid; + system "@@RXVT_NAME@@ -embed $xid &"; + }); + +=item B<-pty-fd> I + +Tells @@RXVT_NAME@@ NOT to execute any commands or create a new pty/tty +pair but instead use the given filehandle as the tty master. This is +useful if you want to drive @@RXVT_NAME@@ as a generic terminal emulator +without having to run a program within it. + +If this switch is given, @@RXVT_NAME@@ will not create any utmp/wtmp +entries and will not tinker with pty/tty permissions - you have to do that +yourself if you want that. + +As an extremely special case, specifying C<-1> will completely suppress +pty/tty operations. + +Here is a example in perl that illustrates how this option can be used (a +longer example is in F): + + use IO::Pty; + use Fcntl; + + my $pty = new IO::Pty; + fcntl $pty, F_SETFD, 0; # clear close-on-exec + system "@@RXVT_NAME@@ -pty-fd " . (fileno $pty) . "&"; + close $pty; + + # now communicate with rxvt + my $slave = $pty->slave; + while (<$slave>) { print $slave "got <$_>\n" } + +=item B<-pe> I + +Comma-separated list of perl extension scripts to use (or not to use) in +this terminal instance. See resource B for details. =back @@ -369,27 +478,27 @@ Note: `@@RXVT_NAME@@ --help' gives a list of all resources (long options) compiled into your version. -There are two different methods that @@RXVT_NAME@@ can use to get the -Xresource data: using the X libraries (Xrm*-functions) or internal -Xresources reader (B<~/.Xdefaults>). For the first method (ie. -B<@@RXVT_NAME@@ -h> lists B), you can set and change the -resources using X11 tools like B. Many distribution do also load -settings from the B<~/.Xresources> file when X starts. - -If compiled with internal Xresources support (i.e. B<@@RXVT_NAME@@ -h> -lists B<.Xdefaults>) then B<@@RXVT_NAME@@> accepts application defaults -set in XAPPLOADDIR/URxvt (compile-time defined: usually -B) and resources set in -B<~/.Xdefaults>, or B<~/.Xresources> if B<~/.Xdefaults> does not exist. -Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two -class names: B and B. The class name B allows -resources common to both B<@@RXVT_NAME@@> and the original I to be -easily configured, while the class name B allows resources -unique to B<@@RXVT_NAME@@>, notably colours and key-handling, to be -shared between different B<@@RXVT_NAME@@> configurations. If no -resources are specified, suitable defaults will be used. Command-line -arguments can be used to override resource settings. The following -resources are allowed: +You can set and change the resources using X11 tools like B. Many +distribution do also load settings from the B<~/.Xresources> file when X +starts. @@RXVT_NAME@@ will consult the following files/resources in order, +with later settings overwriting earlier ones: + + 1. system-wide app-defaults file, either locale-dependent OR global + 2. app-defaults file in $XAPPLRESDIR + 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults + 4. SCREEN_RESOURCES for the current screen + 5. $XENVIRONMENT file OR $HOME/.Xdefaults- + +Note that when reading X resources, B<@@RXVT_NAME@@> recognizes two class +names: B and B. The class name B allows resources +common to both B<@@RXVT_NAME@@> and the original I to be easily +configured, while the class name B allows resources unique to +B<@@RXVT_NAME@@>, to be shared between different B<@@RXVT_NAME@@> +configurations. If no resources are specified, suitable defaults will +be used. Command-line arguments can be used to override resource +settings. The following resources are supported (you might want to +check the @@RXVT_NAME@@perl(3) manpage for additional settings by perl +extensions not documented here): =over 4 @@ -429,7 +538,7 @@ Use the specified colour to display bold or italic characters when the foreground colour is the default. If font styles are not available -(Compile styles) and this option is unset, reverse video is used instead. +(Compile I) and this option is unset, reverse video is used instead. =item B I @@ -441,6 +550,11 @@ Use the specified colour as the background for reverse video characters. +=item B I + +If set, use the specified colour as the colour for the underline +itself. If unset, use the foreground colour. + =item B I Use the specified colour for the cursor. The default is to use the @@ -472,11 +586,17 @@ =item B I -Fade the text by the given percentage when focus is lost. +Fade the text by the given percentage when focus is lost; option B<-fade>. + +=item B I + +Fade to this colour, when fading is used (see B). The default +colour is black; option B<-fadecolor>. =item B I -Tint the transparent background pixmap with the given colour. +Tint the transparent background pixmap with the given colour; option +B<-tint>. =item B I @@ -490,7 +610,7 @@ =item B I Use the specified colour for the scrollbar's trough area [default -#969696]. Only relevant for normal (non XTerm/NeXT) scrollbar. +#969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar. =item B I @@ -509,28 +629,20 @@ be magnified beyond 10 times its original size. The maximum permitted scale is 1000. [default 0x0+50+50] -=item B I - -Read in the specified menu file (note the `.menu' extension is -optional) and also optionally specify a starting tag to find. See the -reference documentation for details on the syntax for the menuBar. - =item B I -Specify the colon-delimited search path for finding files (XPM and -menus), in addition to the paths specified by the B and -B environment variables. +Specify the colon-delimited search path for finding XPM files. =item B I -Select the fonts to be used. This is a comma separated list of font -names that are used in turn when trying to display Unicode characters. -The first font defines the cell size for characters; other fonts might -be smaller, but not larger. A reasonable default font list is always -appended to it. option B<-fn>. +Select the fonts to be used. This is a comma separated list of font names +that are checked in order when trying to find glyphs for characters. The +first font defines the cell size for characters; other fonts might be +smaller, but not (in general) larger. A (hopefully) reasonable default +font list is always appended to it; option B<-fn>. Each font can either be a standard X11 core font (XLFD) name, with -optional prefix C or a Xft font (Compile xft), prefixed with C. +optional prefix C or a Xft font (Compile I), prefixed with C. In addition, each font can be prefixed with additional hints and specifications enclosed in square brackets (C<[]>). The only available @@ -539,7 +651,7 @@ For example, this font resource - URxvt*font: 9x15bold,\ + URxvt.font: 9x15bold,\ -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\ -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \ [codeset=JISX0208]xft:Kochi Gothic:antialias=false, \ @@ -583,6 +695,14 @@ If set, but empty, then this specific style is disabled and the normal text font will being used for the given style. +=item B I + +When font styles are not enabled, or this option is enabled (B, +option B<-is>, the default), bold and italic font styles imply high +intensity foreground/backround colours. Disabling this option (B, +option B<+is>) disables this behaviour, the high intensity colours are not +reachable. + =item B I Set mouse selection style to B which is 2.20, B which is @@ -592,7 +712,7 @@ =item B I Set scrollbar style to B, B, B or B. B is -the author's favourite.. +the author's favourite. =item B I @@ -634,6 +754,15 @@ B to initiate a screen dump to the printer and B or B to include the scrollback as well. +The string will be interpreted as if typed into the shell as-is. + +Example: + + URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX) + +This creates a new file in your home directory with the screen contents +everytime you hit C. + =item B I B: enable the scrollbar [default]; option B<-sb>. B: @@ -663,8 +792,8 @@ =item B I B: scroll with scrollback buffer when tty receives new lines (and -B is False); option B<+sw>. B: do not scroll -with scrollback buffer when tty recieves new lines; option B<-sw>. +B is False); option B<-sw>. B: do not scroll +with scrollback buffer when tty recieves new lines; option B<+sw>. =item B I @@ -693,6 +822,13 @@ Set MWM hints to request a borderless window, i.e. if honoured by the WM, the rxvt-unicode window will not have window decorations; option B<-bl>. +=item B I + +Compile I: Disable the usage of the built-in block graphics/line +drawing characters and just rely on what the specified fonts provide. Use +this if you have a good font and want to use its block graphic glyphs; +option B<-sbg>. + =item B I Specifies the terminal type name to be set in the B environment @@ -739,7 +875,8 @@ =item B I -Specifies number of seconds before blanking the pointer [default 2]. +Specifies number of seconds before blanking the pointer [default 2]. Use a +large number (e.g. C<987654321>) to effectively disable the timeout. =item B I @@ -771,23 +908,39 @@ =item B I -The locale to use for opening the IM. You can use an LC_CTYPE of e.g. -de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the input -extension to be able to input japanese characters while staying in -another locale. option B<-imlocale>. +The locale to use for opening the IM. You can use an C of e.g. +C for normal text processing but C for the +input extension to be able to input japanese characters while staying in +another locale; option B<-imlocale>. + +=item B I + +Specify the font-set used for XIM styles C or +C. It must be a standard X font set (XLFD patterns separated +by commas), i.e. it's not in the same format as the other font lists used +in @@RXVT_NAME@@. The default will be set-up to chose *any* suitable found +found, preferably one or two pixels differing in size to the base font. +option B<-imfont>. + +=item B I + +Change the meaning of triple-click selection with the left mouse +button. Instead of selecting a full line it will extend the selection to +the end of the logical line only; option B<-tcw>. =item B I Enables "insecure" mode. Rxvt-unicode offers some escape sequences that echo arbitrary strings like the icon name or the locale. This could be abused if somebody gets 8-bit-clean access to your display, whether -throuh a mail client displaying mail bodies unfiltered or though -write(1). Therefore, these sequences are disabled by default. (Note -that other terminals, including xterm, have these sequences -enabled by default). You can enable them by setting this boolean -resource or specifying B<-insecure> as an option. At the moment, this -enabled display-answer, locale, findfont, icon label and window title -requests as well as dynamic menubar dispatch. +through a mail client displaying mail bodies unfiltered or through +write(1) or any other means. Therefore, these sequences are disabled by +default. (Note that many other terminals, including xterm, have these +sequences enabled by default, which doesn't make it safer, though). + +You can enable them by setting this boolean resource or specifying +B<-insecure> as an option. At the moment, this enables display-answer, +locale, findfont, icon label and window title requests. =item B I @@ -812,16 +965,172 @@ scrollback buffer and switching to/from the secondary screen will instead scroll the screen up. +=item B: I + +Turn on/off hold window after exit support. If enabled, @@RXVT_NAME@@ +will not immediately destroy its window when the program executed within +it exits. Instead, it will wait till it is being killed or closed by the +user. + =item BI: I -Associate I with keysym I (B<0xFF00 - 0xFFFF>). It may -contain escape values (\a: bell, \b: backspace, \e, \E: escape, \n: -newline, \r: return, \t: -tab, \000: octal number) or control characters (^?: delete, ^@: null, -^A ...) and may enclosed with double quotes so that it can start or end -with whitespace. The intervening resource name B cannot be -omitted. This resource is only available when compiled with -KEYSYM_RESOURCE. +Compile I: Associate I with keysym I. The +intervening resource name B cannot be omitted. + +The format of I is "I<(modifiers-)key>", where I can be +any combination of B, B, B, B, +B, B, B, B, B, B, B, B, +and the abbreviated B, B, B, B, B, B, B, B, B<1>, +B<2>, B<3>, B<4>, B<5>. + +The B, B and B modifiers are usually aliased to +whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 Shift/AltGr +keys are being mapped. B is a synthetic modifier mapped to the +current application keymap mode state. + +The spellings of I can be obtained by using B(1) command or +searching keysym macros from B and +omitting the prefix B. Alternatively you can specify I by its hex +keysym value (B<0x0000 - 0xFFFF>). Note that the lookup of Is is not +performed in an exact manner; however, the closest match is assured. + +I may contain escape values (C<\a>: bell, C<\b>: backspace, +C<\e>, C<\E>: escape, C<\n>: newline, C<\r>: carriage return, C<\t>: tab, +C<\000>: octal number) or verbatim control characters (C<^?>: delete, +C<^@>: null, C<^A> ...) and may be enclosed with double quotes so that it +can start or end with whitespace. + +Please note that you need to double the C<\> in resource files, as +Xlib itself does it's own de-escaping (you can use C<\033> instead of +C<\e> (and so on), which will work with both Xt and @@RXVT_NAME@@'s own +processing). + +You can define a range of keysyms in one shot by providing a I +with pattern B, where the delimeter `/' +should be a character not used by the strings. + +Its usage can be demonstrated by an example: + + URxvt.keysym.M-C-0x61: list|\033 + +The above line is equivalent to the following three lines: + + URxvt.keysym.Meta-Control-0x61: \033 + URxvt.keysym.Meta-Control-0x62: \033 + URxvt.keysym.Meta-Control-0x63: \033 + +If I takes the form of C, the specified B +is interpreted and executed as @@RXVT_NAME@@'s control sequence. For +example the following means "change the current locale to C +when Control-Meta-c is being pressed": + + URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 + +If I takes the form C, then the specified B +is passed to the C perl handler. See the @@RXVT_NAME@@perl(3) +manpage. For example, the F extension (activated via +C<@@RXVT_NAME@@ -pe selection>) listens for C events: + + URxvt.keysym.M-C-c: perl:selection:rot13 + +Due the the large number of modifier combinations, a defined key mapping +will match if at I the specified identifiers are being set, and +no other key mappings with those and more bits are being defined. That +means that defining a key map for C will automatically provide +definitions for C, C and so on, unless some of those are defined +mappings themselves. + +Unfortunately, this will override built-in key mappings. For example +if you overwrite the C key you will disable @@RXVT_NAME@@'s +C mapping. To re-enable that, you can poke "holes" into the +user-defined keymap using the C replacement: + + URxvt.keysym.Insert: + URxvt.keysym.S-Insert: builtin: + +The first line defines a mapping for C and I combination +of modifiers. The second line re-establishes the default mapping for +C. + +The following example will map Control-Meta-1 and Control-Meta-2 to +the fonts C and C<9x15bold>, so you can have some limited +font-switching at runtime: + + URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 + +Other things are possible, e.g. resizing (see @@RXVT_NAME@@(7) for more +info): + + URxvt.keysym.M-C-3: command:\033[8;25;80t + URxvt.keysym.M-C-4: command:\033[8;48;110t + +=item B: I + +=item B: I + +Comma-separated list(s) of perl extension scripts (default: C) to +use in this terminal instance; option B<-pe>. + +Extension names can be prefixed with a C<-> sign to prohibit using +them. This can be useful to selectively disable some extensions loaded +by default, or specified via the C resource. For +example, C will use all the default extension except +C. + +Extension names can also be followed by an argument in angle brackets +(e.g. C<< searchable-scrollback >>, which binds the hotkey for +searchable scorllback to Alt/Meta-s). Mentioning the same extension +multiple times with different arguments will pass multiple arguments to +the extension. + +Each extension is looked up in the library directories, loaded if +necessary, and bound to the current terminal instance. + +If both of these resources are the empty string, then the perl +interpreter will not be initialized. The idea behind two options is that +B will be used for extensions that should be available to +all instances, while B is used for specific instances. + +=item B: I + +Perl code to be evaluated when all extensions have been registered. See +the @@RXVT_NAME@@perl(3) manpage. Due to security reasons, this resource +will be ignored when running setuid/setgid. + +=item B: I + +Colon-separated list of additional directories that hold extension +scripts. When looking for extensions specified by the C resource, +@@RXVT_NAME@@ will first look in these directories and then in +F<@@RXVT_LIBDIR@@/urxvt/perl/>. Due to security reasons, this resource +will be ignored when running setuid/setgid. + +See the @@RXVT_NAME@@perl(3) manpage. + +=item B<< selection.pattern-I >>: I + +Additional selection patterns, see the @@RXVT_NAME@@perl(3) manpage for +details. + +=item B<< selection-autotransform.I >>: I + +Selection auto-transform patterns, see the @@RXVT_NAME@@perl(3) manpage +for details. + +=item B I + +Sets the hotkey that starts the incremental scrollback buffer search +(default: C). + +=item B: I + +Specifies the program to be started with a URL argument. Used by the +C and C perl extensions. + +=item B: I + +Sets the WM_TRANSIENT_FOR property to the given window iw. =back @@ -845,9 +1154,9 @@ If mouse reporting mode is active, the normal scrollbar actions are disabled -- on the assumption that we are using a fullscreen -application. Instead, pressing Button1 and Button3 sends B -(Next) and B (Prior), respectively. Similarly, clicking on the -up and down arrows sends B (Up) and B (Down), +application. Instead, pressing Button1 and Button3 sends B +(Next) and B (Prior), respectively. Similarly, clicking on the +up and down arrows sends B (Up) and B (Down), respectively. =head1 TEXT SELECTION AND INSERTION @@ -859,14 +1168,17 @@ =item B: -Left click at the beginning of the region, drag to the end of the -region and release; Right click to extend the marked region; Left -double-click to select a word; Left triple-click to select the entire -line. +Left click at the beginning of the region, drag to the end of the region +and release; Right click to extend the marked region; Left double-click +to select a word; Left triple-click to select the entire logical line +(which can span multiple screen lines), unless modified by resource +B. Starting a selection while pressing the B key (or B keys) -(Compile: frills) will create a rectangular selection instead of a normal -one. +(Compile: I) will create a rectangular selection instead of a +normal one. In this mode, every selected row becomes its own line in the +selection, and trailing whitespace is visually underlined and removed from +the selection. =item B: @@ -881,10 +1193,14 @@ Changing fonts (or font sizes, respectively) via the keypad is not yet supported in rxvt-unicode. Bug me if you need this. -You can, however, switch fonts at runtime using escape sequences (and -therefore using the menubar), e.g.: +You can, however, switch fonts at runtime using escape sequences, e.g.: + + printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic" + +You can use keyboard shortcuts, too: - printf '\e]701;%s\007' "9x15bold,xft:Kochi Gothic" + URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007 rxvt-unicode will automatically re-apply these fonts to the output so far. @@ -898,7 +1214,7 @@ =over 4 -=item 5.1: Basic method +=item * 5.1: Basic method This allows you to enter unicode characters using their hexcode. @@ -915,7 +1231,7 @@ by pressing C and C, followed by C<6-7-1-D-SPACE-6-5-E-5>, followed by releasing the modifier keys. -=item 5.2: Keyboard symbols entry method +=item * 5.2: Keyboard symbols entry method This mode lets you input characters representing the keycap symbols of your keyboard, if representable in the current locale encoding. @@ -928,12 +1244,12 @@ C, although your intention might have been to enter a reverse tab (Shift-Tab). -=item 5.3: Screen-selection entry method +=item * 5.3: Screen-selection entry method While this is implemented already (it's basically the selection mechanism), it could be extended by displaying a unicode character map. -=item 5.4: Feedback method for identifying displayed characters for later input +=item * 5.4: Feedback method for identifying displayed characters for later input This method lets you display the unicode character code associated with characters already displayed. @@ -955,10 +1271,10 @@ =head1 LOGIN STAMP -B<@@RXVT_NAME@@> tries to write an entry into the I(5) file so -that it can be seen via the I command, and can accept messages. -To allow this feature, B<@@RXVT_NAME@@> must be installed setuid root on -some systems. +B<@@RXVT_NAME@@> tries to write an entry into the I(5) file so that +it can be seen via the I command, and can accept messages. To +allow this feature, B<@@RXVT_NAME@@> may need to be installed setuid root +on some systems or setgid to root or to some other group on others. =head1 COLORS AND GRAPHICS @@ -1011,38 +1327,97 @@ =head1 ENVIRONMENT -B<@@RXVT_NAME@@> sets the environment variables B, B -and B. The environment variable B is set to the X -window id number of the B<@@RXVT_NAME@@> window and it also uses and -sets the environment variable B to specify which display -terminal to use. B<@@RXVT_NAME@@> uses the environment variables -B and B to find XPM files. - -=head1 FILES +B<@@RXVT_NAME@@> sets and/or uses the following environment variables: =over 4 -=item B +=item B -System file for login records. +Normally set to C, unless overwritten at configure time, via +resources or on the commandline. -=item B +=item B -Color names. +Either C, C, depending on wether @@RXVT_NAME@@ was +compiled with XPM support, and optionally with the added extension +C<-mono> to indicate that rxvt-unicode runs on a monochrome screen. + +=item B + +Set to a string of the form C or C, where C is +the colour code used as default foreground/text colour (or the string +C to indicate that the default-colour escape sequence is to be +used), C is the colour code used as default background colour (or the +string C), and C is the string C if @@RXVT_NAME@@ +was compiled with XPM support. Libraries like C and C can +(and do) use this information to optimize screen output. + +=item B + +Set to the (decimal) X Window ID of the @@RXVT_NAME@@ window (the toplevel +window, which usually has subwindows for the scrollbar, the terminal +window and so on). + +=item B + +Set to the terminfo directory iff @@RXVT_NAME@@ was configured with +C<--with-terminfo=PATH>. + +=item B + +Used by @@RXVT_NAME@@ to connect to the display and set to the correct +display in it's child processes. + +=item B + +The shell to be used for command execution, defaults to C. + +=item B + +The path where @@RXVT_NAME@@ looks for support files such as menu and xpm +files. + +=item B + +Used in the same way as C. + +=item B + +The unix domain socket path used by @@RXVT_NAME@@c(1) and +@@RXVT_NAME@@d(1). + +Default F<<< $HOME/.rxvt-unicode-I<< > >>>. + +=item B + +Used to locate the default directory for the unix domain socket for +daemon communications and to locate various resource files (such as +C<.Xdefaults>) + +=item B + +Directory where various X resource files are being located. + +=item B + +If set and accessible, gives the name of a X resource file to be loaded by +@@RXVT_NAME@@. =back -=head1 SEE ALSO +=head1 FILES -@@RXVT_NAME@@(7), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) +=over 4 + +=item B -=head1 BUGS +Color names. -Check the BUGS file for an up-to-date list. +=back -Cursor change support is not yet implemented. +=head1 SEE ALSO -Click-and-drag doesn't work with X11 mouse report overriding. +@@RXVT_NAME@@(7), @@RXVT_NAME@@c(1), @@RXVT_NAME@@d(1), xterm(1), sh(1), resize(1), X(1), pty(4), tty(4), utmp(5) =head1 CURRENT PROJECT COORDINATOR @@ -1050,13 +1425,9 @@ =item Project Coordinator -@@RXVT_MAINT@@ L<@@RXVT_MAINTEMAIL@@> - -=item Web page maintainter - -@@RXVT_WEBMAINT@@ L<@@RXVT_WEBMAINTEMAIL@@> +Marc A. Lehmann L<< >> -L<@@RXVT_WEBPAGE@@> +L =back @@ -1091,7 +1462,7 @@ Rewrote screen display and text selection routines. Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) -=item Marc Alexander Lehmann L<< >> +=item Marc Alexander Lehmann L<< >> Forked rxvt-unicode, rewrote most of the display code and internal character handling to store text in unicode, improve xterm