--- rxvt-unicode/doc/rxvt.1.txt 2005/01/16 15:59:45 1.2 +++ rxvt-unicode/doc/rxvt.1.txt 2006/01/29 21:45:47 1.54 @@ -6,7 +6,7 @@ rxvt [options] [-e command [ args ]] DESCRIPTION - rxvt-unicode, version 4.8, is a colour vt102 terminal emulator intended + rxvt-unicode, version 7.4, is a colour vt102 terminal emulator intended as an *xterm*(1) replacement for users who do not require features such as Tektronix 4014 emulation and toolkit-style configurability. As a result, rxvt-unicode uses much less swap space -- a significant @@ -14,7 +14,9 @@ FREQUENTLY ASKED QUESTIONS See rxvt(7) (try "man 7 rxvt") for a list of frequently asked questions - and answer to them and some common problems. + and answer to them and some common problems. That document is also + accessible on the World-Wide-Web at + . RXVT-UNICODE VS. RXVT Unlike the original rxvt, rxvt-unicode stores all text in Unicode @@ -84,6 +86,10 @@ respected). In the absence of this option, the display specified by the DISPLAY environment variable is used. + -depth *bitdepth* + Compile *frills*: Attempt to find a visual with the given bit depth; + resource depth. + -geometry *geom* Window geometry (-g still respected); resource geometry. @@ -93,19 +99,27 @@ -j|+j Turn on/off jump scrolling; resource jumpScroll. - -ip|+ip + -ip|+ip | -tr|+tr Turn on/off inheriting parent window's pixmap. Alternative form is -tr; resource inheritPixmap. -fade *number* - Fade the text by the given percentage when focus is lost. resource - fading. + Fade the text by the given percentage when focus is lost. Small + values fade a little only, 100 completely replaces all colours by + the fade colour; resource fading. + + -fadecolor *colour* + Fade to this colour when fading is used (see -fade). The default + colour is black. resource fadeColor. -tint *colour* Tint the transparent background pixmap with the given colour when - transparency is enabled with -tr or -ip. See also the -sh option - that can be used to brighten or darken the image in addition to - tinting it. + transparency is enabled with -tr or -ip. This only works for + non-tiled backgrounds, currently. See also the -sh option that can + be used to brighten or darken the image in addition to tinting it; + resource *tintColor*. Example: + + rxvt -tr -tint blue -sh 40 -sh *number* Darken (0 .. 100) or lighten (-1 .. -100) the transparent background image in addition to tinting it (i.e. -tint must be @@ -120,7 +134,7 @@ -pixmap *file[;geom]* Compile *XPM*: Specify XPM file for the background and also optionally specify its scaling with a geometry string. Note you may - need to add quotes to avoid special shell interpretation of the `;' + need to add quotes to avoid special shell interpretation of the ";" in the command-line; resource backgroundPixmap. -cr *colour* @@ -138,7 +152,7 @@ -fn *fontlist* Select the fonts to be used. This is a comma separated list of font - names that are used in turn when trying to display Unicode + names that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; other fonts might be smaller, but not (in general) larger. A (hopefully) reasonable default font list is always appended to it. @@ -155,16 +169,21 @@ FAQ section of rxvt(7). -fb *fontlist* - Compile font-styles: The bold font list to use when bold characters - are to be printed. See resource boldFont for details. + Compile *font-styles*: The bold font list to use when bold + characters are to be printed. See resource boldFont for details. -fi *fontlist* - Compile font-styles: The italic font list to use when bold + Compile *font-styles*: The italic font list to use when *italic* characters are to be printed. See resource italicFont for details. -fbi *fontlist* - Compile font-styles: The bold italic font list to use when bold - characters are to be printed. See resource boldItalicFont for + Compile *font-styles*: The bold italic font list to use when *bold + italic* characters are to be printed. See resource boldItalicFont + for details. + + -is|+is + Compile *font-styles*: Bold/Italic font styles imply high intensity + foreground/background (default). See resource intensityStyles for details. -name *name* @@ -204,7 +223,7 @@ Put scrollbar on right/left; resource scrollBar_right. -st|+st - Display normal (non XTerm/NeXT) scrollbar without/with a trough; + Display rxvt (non XTerm/NeXT) scrollbar without/with a trough; resource scrollBar_floating. -ptab|+ptab @@ -239,6 +258,16 @@ if honoured by the WM, the rxvt-unicode window will not have window decorations; resource borderLess. + -override-redirect + Compile *frills*: Sets override-redirect on the window; resource + override-redirect. + + -sbg + Compile *frills*: Disable the usage of the built-in block + graphics/line drawing characters and just rely on what the specified + fonts provide. Use this if you have a good font and want to use its + block graphic glyphs; resource skipBuiltinGlyphs. + -lsp *number* Compile *frills*: Lines (pixel height) to insert between each row of the display. Useful to work around font rendering problems; resource @@ -259,6 +288,12 @@ run the program specified by the SHELL environment variable or, failing that, *sh(1)*. + Please note that you must specify a program with arguments. If you + want to run shell commands, you have to specify the shell, like + this: + + rxvt -e sh -c "shell commands" + -title *text* Window title (-T still respected); the default title is the basename of the program specified after the -e option, if any, otherwise the @@ -279,10 +314,20 @@ Compile *XIM*: input method name. resource inputMethod. -imlocale *string* - The locale to use for opening the IM. You can use an LC_CTYPE of - e.g. de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the - input extension to be able to input japanese characters while - staying in another locale. + The locale to use for opening the IM. You can use an "LC_CTYPE" of + e.g. "de_DE.UTF-8" for normal text processing but "ja_JP.EUC-JP" for + the input extension to be able to input japanese characters while + staying in another locale. resource imLocale. + + -imfont *fontset* + Set the font set to use for the X Input Method, see resource imFont + for more info. + + -tcw + Change the meaning of triple-click selection with the left mouse + button. Instead of selecting a full line it will extend the + selection the end of the logical line only. resource + tripleclickwords. -insecure Enable "insecure" mode, which currently enables most of the escape @@ -301,34 +346,101 @@ Turn on/off secondary screen scroll (default enabled); resource secondaryScroll. - -xrm *resourcestring* - No effect on rxvt-unicode. Simply passes through an argument to be - made available in the instance's argument list. Appears in - *WM_COMMAND* in some window managers. + -hold|+hold + Turn on/off hold window after exit support. If enabled, rxvt will + not immediately destroy its window when the program executed within + it exits. Instead, it will wait till it is being killed or closed by + the user; resource hold. + + -keysym.*sym* *string* + Remap a key symbol. See resource keysym. + + -embed *windowid* + Tells rxvt to embed it's windows into an already-existing window, + which enables applications to easily embed a terminal. + + Right now, rxvt will first unmap/map the specified window, so it + shouldn't be a top-level window. rxvt will also reconfigure it quite + a bit, so don't expect it to keep some specific state. It's best to + create an extra subwindow for rxvt and leave it alone. + + The window will not be destroyed when rxvt exits. + + It might be useful to know that rxvt will not close file descriptors + passed to it (except for stdin/out/err, of course), so you can use + file descriptors to communicate with the programs within the + terminal. This works regardless of wether the "-embed" option was + used or not. + + Here is a short Gtk2-perl snippet that illustrates how this option + can be used (a longer example is in doc/embed): + + my $rxvt = new Gtk2::Socket; + $rxvt->signal_connect_after (realize => sub { + my $xid = $_[0]->window->get_xid; + system "rxvt -embed $xid &"; + }); + + -pty-fd *file descriptor* + Tells rxvt NOT to execute any commands or create a new pty/tty pair + but instead use the given filehandle as the tty master. This is + useful if you want to drive rxvt as a generic terminal emulator + without having to run a program within it. + + If this switch is given, rxvt will not create any utmp/wtmp entries + and will not tinker with pty/tty permissions - you have to do that + yourself if you want that. + + As an extremely special case, specifying -1 will completely suppress + pty/tty operations. + + Here is a example in perl that illustrates how this option can be + used (a longer example is in doc/pty-fd): + + use IO::Pty; + use Fcntl; + + my $pty = new IO::Pty; + fcntl $pty, F_SETFD, 0; # clear close-on-exec + system "rxvt -pty-fd " . (fileno $pty) . "&"; + close $pty; + + # now communicate with rxvt + my $slave = $pty->slave; + while (<$slave>) { print $slave "got <$_>\n" } + + -pe *string* + Comma-separated list of perl extension scripts to use (or not to + use) in this terminal instance. See resource perl-ext for details. RESOURCES (available also as long-options) Note: `rxvt --help' gives a list of all resources (long options) compiled into your version. - There are two different methods that rxvt can use to get the Xresource - data: using the X libraries (Xrm*-functions) or internal Xresources - reader (~/.Xdefaults). For the first method (ie. rxvt -h lists - XGetDefaults), you can set and change the resources using X11 tools like - xset. Many distribution do also load settings from the ~/.Xresources - file when X starts. - - If compiled with internal Xresources support (i.e. rxvt -h lists - .Xdefaults) then rxvt accepts application defaults set in - XAPPLOADDIR/URxvt (compile-time defined: usually - /usr/lib/X11/app-defaults/URxvt) and resources set in ~/.Xdefaults, or - ~/.Xresources if ~/.Xdefaults does not exist. Note that when reading X - resources, rxvt recognizes two class names: XTerm and URxvt. The class - name Rxvt allows resources common to both rxvt and the original *rxvt* - to be easily configured, while the class name URxvt allows resources - unique to rxvt, notably colours and key-handling, to be shared between - different rxvt configurations. If no resources are specified, suitable - defaults will be used. Command-line arguments can be used to override - resource settings. The following resources are allowed: + You can set and change the resources using X11 tools like xrdb. Many + distribution do also load settings from the ~/.Xresources file when X + starts. rxvt will consult the following files/resources in order, with + later settings overwriting earlier ones: + + 1. system-wide app-defaults file, either locale-dependent OR global + 2. app-defaults file in $XAPPLRESDIR + 3. RESOURCE_MANAGER property on root-window OR $HOME/.Xdefaults + 4. SCREEN_RESOURCES for the current screen + 5. $XENVIRONMENT file OR $HOME/.Xdefaults- + + Note that when reading X resources, rxvt recognizes two class names: + Rxvt and URxvt. The class name Rxvt allows resources common to both rxvt + and the original *rxvt* to be easily configured, while the class name + URxvt allows resources unique to rxvt, to be shared between different + rxvt configurations. If no resources are specified, suitable defaults + will be used. Command-line arguments can be used to override resource + settings. The following resources are supported (you might want to check + the rxvtperl(3) manpage for additional settings by perl extensions not + documented here): + + depth: *bitdepth* + Compile *frills*: Attempt to find a visual with the given bit depth; + option -depth. geometry: *geom* Create the window with the specified X window geometry [default @@ -361,7 +473,7 @@ colorIT: *colour* Use the specified colour to display bold or italic characters when the foreground colour is the default. If font styles are not - available (Compile styles) and this option is unset, reverse video + available (Compile *styles*) and this option is unset, reverse video is used instead. colorUL: *colour* @@ -401,10 +513,16 @@ pixmap. fading: *number* - Fade the text by the given percentage when focus is lost. + Fade the text by the given percentage when focus is lost; option + -fade. + + fadeColor: *colour* + Fade to this colour, when fading is used (see fading:). The default + colour is black; option -fadecolor. tintColor: *colour* - Tint the transparent background pixmap with the given colour. + Tint the transparent background pixmap with the given colour; option + -tint. shading: *number* Darken (0 .. 100) or lighten (-1 .. -100) the transparent background @@ -415,7 +533,7 @@ troughColor: *colour* Use the specified colour for the scrollbar's trough area [default - #969696]. Only relevant for normal (non XTerm/NeXT) scrollbar. + #969696]. Only relevant for rxvt (non XTerm/NeXT) scrollbar. borderColor: *colour* The colour of the border around the text area and between the @@ -432,26 +550,19 @@ will be magnified beyond 10 times its original size. The maximum permitted scale is 1000. [default 0x0+50+50] - menu: *file[;tag]* - Read in the specified menu file (note the `.menu' extension is - optional) and also optionally specify a starting tag to find. See - the reference documentation for details on the syntax for the - menuBar. - path: *path* - Specify the colon-delimited search path for finding files (XPM and - menus), in addition to the paths specified by the RXVTPATH and PATH - environment variables. + Specify the colon-delimited search path for finding XPM files. font: *fontlist* Select the fonts to be used. This is a comma separated list of font - names that are used in turn when trying to display Unicode + names that are checked in order when trying to find glyphs for characters. The first font defines the cell size for characters; - other fonts might be smaller, but not larger. A reasonable default - font list is always appended to it. option -fn. + other fonts might be smaller, but not (in general) larger. A + (hopefully) reasonable default font list is always appended to it; + option -fn. Each font can either be a standard X11 core font (XLFD) name, with - optional prefix "x:" or a Xft font (Compile xft), prefixed with + optional prefix "x:" or a Xft font (Compile *xft*), prefixed with "xft:". In addition, each font can be prefixed with additional hints and @@ -461,7 +572,7 @@ For example, this font resource - URxvt*font: 9x15bold,\ + URxvt.font: 9x15bold,\ -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\ -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \ [codeset=JISX0208]xft:Kochi Gothic:antialias=false, \ @@ -504,6 +615,13 @@ If set, but empty, then this specific style is disabled and the normal text font will being used for the given style. + intensityStyles: *boolean* + When font styles are not enabled, or this option is enabled (True, + option -is, the default), bold and italic font styles imply high + intensity foreground/backround colours. Disabling this option + (False, option +is) disables this behaviour, the high intensity + colours are not reachable. + selectstyle: *mode* Set mouse selection style to old which is 2.20, oldword which is xterm style with 2.20 old word selection, or anything else which @@ -511,7 +629,7 @@ scrollstyle: *mode* Set scrollbar style to rxvt, plain, next or xterm. plain is the - author's favourite.. + author's favourite. title: *string* Set window title string, the default title is the command-line @@ -546,6 +664,15 @@ Print to initiate a screen dump to the printer and Ctrl-Print or Shift-Print to include the scrollback as well. + The string will be interpreted as if typed into the shell as-is. + + Example: + + URxvt.print-pipe: cat > $(TMPDIR=$HOME mktemp urxvt.XXXXXX) + + This creates a new file in your home directory with the screen + contents everytime you hit "Print". + scrollBar: *boolean* True: enable the scrollbar [default]; option -sb. False: disable the scrollbar; option +sb. @@ -568,8 +695,8 @@ scrollWithBuffer: *boolean* True: scroll with scrollback buffer when tty receives new lines (and - scrollTtyOutput is False); option +sw. False: do not scroll with - scrollback buffer when tty recieves new lines; option -sw. + scrollTtyOutput is False); option -sw. False: do not scroll with + scrollback buffer when tty recieves new lines; option +sw. scrollTtyKeypress: *boolean* True: scroll to bottom when a non-special key is pressed. Special @@ -594,6 +721,12 @@ the WM, the rxvt-unicode window will not have window decorations; option -bl. + skipBuiltinGlyphs: *boolean* + Compile *frills*: Disable the usage of the built-in block + graphics/line drawing characters and just rely on what the specified + fonts provide. Use this if you have a good font and want to use its + block graphic glyphs; option -sbg. + termName: *termname* Specifies the terminal type name to be set in the TERM environment variable; option -tn. @@ -631,6 +764,8 @@ pointerBlankDelay: *number* Specifies number of seconds before blanking the pointer [default 2]. + Use a large number (e.g. 987654321) to effectively disable the + timeout. backspacekey: *string* The string to send when the backspace key is pressed. If set to DEC @@ -644,8 +779,17 @@ associated with the Execute key. cutchars: *string* - The characters used as delimiters for double-click word selection. - The built-in default: + The characters used as delimiters for double-click word selection + (whitespace delimiting is added automatically if resource is given). + + When the selection extension is in use (the default if compiled in, + see the rxvtperl(3) manpage), a suitable regex using these + characters will be created (if the resource exists, otherwise, no + regex will be created). In this mode, characters outside ISO-8859-1 + can be used. + + When the selection extension is not used, only ISO-8859-1 characters + can be used. If not specified, the built-in default is used: BACKSLASH `"'&()*,;<=>?@[]{|} @@ -656,22 +800,37 @@ *name* of inputMethod to use; option -im. imLocale: *name* - The locale to use for opening the IM. You can use an LC_CTYPE of - e.g. de_DE.UTF-8 for normal text processing but ja_JP.EUC-JP for the - input extension to be able to input japanese characters while - staying in another locale. option -imlocale. + The locale to use for opening the IM. You can use an "LC_CTYPE" of + e.g. "de_DE.UTF-8" for normal text processing but "ja_JP.EUC-JP" for + the input extension to be able to input japanese characters while + staying in another locale; option -imlocale. + + imFont: *fontset* + Specify the font-set used for XIM styles "OverTheSpot" or + "OffTheSpot". It must be a standard X font set (XLFD patterns + separated by commas), i.e. it's not in the same format as the other + font lists used in rxvt. The default will be set-up to chose *any* + suitable found found, preferably one or two pixels differing in size + to the base font. option -imfont. + + tripleclickwords: *boolean* + Change the meaning of triple-click selection with the left mouse + button. Instead of selecting a full line it will extend the + selection to the end of the logical line only; option -tcw. insecure: *boolean* Enables "insecure" mode. Rxvt-unicode offers some escape sequences that echo arbitrary strings like the icon name or the locale. This could be abused if somebody gets 8-bit-clean access to your display, - whether throuh a mail client displaying mail bodies unfiltered or - though write(1). Therefore, these sequences are disabled by default. - (Note that other terminals, including xterm, have these sequences - enabled by default). You can enable them by setting this boolean - resource or specifying -insecure as an option. At the moment, this - enabled display-answer, locale, findfont, icon label and window - title requests as well as dynamic menubar dispatch. + whether through a mail client displaying mail bodies unfiltered or + through write(1) or any other means. Therefore, these sequences are + disabled by default. (Note that many other terminals, including + xterm, have these sequences enabled by default, which doesn't make + it safer, though). + + You can enable them by setting this boolean resource or specifying + -insecure as an option. At the moment, this enables display-answer, + locale, findfont, icon label and window title requests. modifier: *modifier* Set the key to be interpreted as the Meta key to: alt, meta, hyper, @@ -682,51 +841,177 @@ (control-E) character is passed through. It may contain escape values as described in the entry on keysym following. - secondaryScreen: *bool* + secondaryScreen: *boolean* Turn on/off secondary screen (default enabled). - secondaryScroll: *bool* + secondaryScroll: *boolean* Turn on/off secondary screen scroll (default enabled). If the this option is enabled, scrolls on the secondary screen will change the scrollback buffer and switching to/from the secondary screen will instead scroll the screen up. + hold: *boolean* + Turn on/off hold window after exit support. If enabled, rxvt will + not immediately destroy its window when the program executed within + it exits. Instead, it will wait till it is being killed or closed by + the user. + keysym.*sym*: *string* - Associate *string* with keysym *sym*. The intervening resource name - keysym. cannot be omitted. This resource is only available when - compiled with KEYSYM_RESOURCE. - - The format of *sym* is "*(mask-)key*", where *mask* can be any - combination of Control, NumLock, Shift, Meta, Lock, Mod1, Mod2, - Mod3, Mod4, Mod5, and the abbreviated C, N, S, M, A, L, 1, 2, 3, 4, - 5. The spellings of *key* can be obtained by using xev(1) command or + Compile *frills*: Associate *string* with keysym *sym*. The + intervening resource name keysym. cannot be omitted. + + The format of *sym* is "*(modifiers-)key*", where *modifiers* can be + any combination of ISOLevel3, AppKeypad, Control, NumLock, Shift, + Meta, Lock, Mod1, Mod2, Mod3, Mod4, Mod5, and the abbreviated I, K, + C, N, S, M, A, L, 1, 2, 3, 4, 5. + + The NumLock, Meta and ISOLevel3 modifiers are usually aliased to + whatever modifier the NumLock key, Meta/Alt keys or ISO Level3 + Shift/AltGr keys are being mapped. AppKeypad is a synthetic modifier + mapped to the current application keymap mode state. + + The spellings of *key* can be obtained by using xev(1) command or searching keysym macros from /usr/X11R6/include/X11/keysymdef.h and - omit the prefix XK_. Alternatively you can specify *key* by its hex - keysym value (0x0000 - 0xFFFF). Note that the lookup of *sym*s is - not performed in an exact manner; however, the closest match is + omitting the prefix XK_. Alternatively you can specify *key* by its + hex keysym value (0x0000 - 0xFFFF). Note that the lookup of *sym*s + is not performed in an exact manner; however, the closest match is assured. - *string* may contain escape values (\a: bell, \b: backspace, \e, \E: - escape, \n: newline, \r: return, \t: tab, \000: octal number) or - control characters (^?: delete, ^@: null, ^A ...) and may enclosed - with double quotes so that it can start or end with whitespace. + *string* may contain escape values ("\a": bell, "\b": backspace, + "\e", "\E": escape, "\n": newline, "\r": carriage return, "\t": tab, + "\000": octal number) or verbatim control characters ("^?": delete, + "^@": null, "^A" ...) and may be enclosed with double quotes so that + it can start or end with whitespace. + + Please note that you need to double the "\" in resource files, as + Xlib itself does it's own de-escaping (you can use "\033" instead of + "\e" (and so on), which will work with both Xt and rxvt's own + processing). You can define a range of keysyms in one shot by providing a - *string* with pattern list/STRING1/STRING2/STRING3, where the - delimeter `/' should be a character not used by the STRINGs. + *string* with pattern list/PREFIX/MIDDLE/SUFFIX, where the delimeter + `/' should be a character not used by the strings. + + Its usage can be demonstrated by an example: - Its usage can be demonstrated by an example: URxvt.keysym.M-C-0x61: - list.abc.\e + URxvt.keysym.M-C-0x61: list|\033 The above line is equivalent to the following three lines: - URxvt.keysym.Meta-Control-0x61: \e - URxvt.keysym.Meta-Control-0x62: \e - URxvt.keysym.Meta-Control-0x63: \e - - If *string* takes the form of proto:STRING, the specified STRING is - interpreted and executed as rxvt's control sequence. For example, - "proto:\033]701;zh_CN.GBK\007" means changing the current locale to - zh_CN.GBK. + + URxvt.keysym.Meta-Control-0x61: \033 + URxvt.keysym.Meta-Control-0x62: \033 + URxvt.keysym.Meta-Control-0x63: \033 + + If *string* takes the form of "command:STRING", the specified STRING + is interpreted and executed as rxvt's control sequence. For example + the following means "change the current locale to "zh_CN.GBK" when + Control-Meta-c is being pressed": + + URxvt.keysym.M-C-c: command:\033]701;zh_CN.GBK\007 + + If *string* takes the form "perl:STRING", then the specified STRING + is passed to the "on_keyboard_command" perl handler. See the + rxvtperl(3) manpage. For example, the selection extension (activated + via "rxvt -pe selection") listens for "selection:rot13" events: + + URxvt.keysym.M-C-c: perl:selection:rot13 + + Due the the large number of modifier combinations, a defined key + mapping will match if at *at least* the specified identifiers are + being set, and no other key mappings with those and more bits are + being defined. That means that defining a key map for "a" will + automatically provide definitions for "Meta-a", "Shift-a" and so on, + unless some of those are defined mappings themselves. + + Unfortunately, this will override built-in key mappings. For example + if you overwrite the "Insert" key you will disable rxvt's + "Shift-Insert" mapping. To re-enable that, you can poke "holes" into + the user-defined keymap using the "builtin:" replacement: + + URxvt.keysym.Insert: + URxvt.keysym.S-Insert: builtin: + + The first line defines a mapping for "Insert" and *any* combination + of modifiers. The second line re-establishes the default mapping for + "Shift-Insert". + + The following example will map Control-Meta-1 and Control-Meta-2 to + the fonts "suxuseuro" and "9x15bold", so you can have some limited + font-switching at runtime: + + URxvt.keysym.M-C-1: command:\033]50;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]50;9x15bold\007 + + Other things are possible, e.g. resizing (see rxvt(7) for more + info): + + URxvt.keysym.M-C-3: command:\033[8;25;80t + URxvt.keysym.M-C-4: command:\033[8;48;110t + + perl-ext-common: *string* + perl-ext: *string* + Comma-separated list(s) of perl extension scripts (default: + "default") to use in this terminal instance; option -pe. + + Extension names can be prefixed with a "-" sign to prohibit using + them. This can be useful to selectively disable some extensions + loaded by default, or specified via the "perl-ext-common" resource. + For example, "default,-selection" will use all the default extension + except "selection". + + Extension names can also be followed by an argument in angle + brackets (e.g. "searchable-scrollback", which binds the hotkey + for searchable scorllback to Alt/Meta-s). Mentioning the same + extension multiple times with different arguments will pass multiple + arguments to the extension. + + Each extension is looked up in the library directories, loaded if + necessary, and bound to the current terminal instance. + + If both of these resources are the empty string, then the perl + interpreter will not be initialized. The idea behind two options is + that perl-ext-common will be used for extensions that should be + available to all instances, while perl-ext is used for specific + instances. + + perl-eval: *string* + Perl code to be evaluated when all extensions have been registered. + See the rxvtperl(3) manpage. Due to security reasons, this resource + will be ignored when running setuid/setgid. + + perl-lib: *path* + Colon-separated list of additional directories that hold extension + scripts. When looking for extensions specified by the "perl" + resource, rxvt will first look in these directories and then in + /opt/rxvt/lib/urxvt/perl/. Due to security reasons, this resource + will be ignored when running setuid/setgid. + + See the rxvtperl(3) manpage. + + selection.pattern-*idx*: *perl-regex* + Additional selection patterns, see the rxvtperl(3) manpage for + details. + + selection-autotransform.*idx*: *perl-transform* + Selection auto-transform patterns, see the rxvtperl(3) manpage for + details. + + searchable-scrollback: *keysym* + Sets the hotkey that starts the incremental scrollback buffer search + (default: "M-s"). + + urlLauncher: *string* + Specifies the program to be started with a URL argument. Used by the + "selection-popup" and "mark-urls" perl extensions. + + transient-for: *windowid* + Compile *frills*: Sets the WM_TRANSIENT_FOR property to the given + window id. + + override-redirect: *boolean* + Compile *frills*: Sets override-redirect for the terminal window, + making it almost invisible to window managers; option + -override-redirect. THE SCROLLBAR Lines of text that scroll off the top of the rxvt window (resource: @@ -746,9 +1031,9 @@ If mouse reporting mode is active, the normal scrollbar actions are disabled -- on the assumption that we are using a fullscreen - application. Instead, pressing Button1 and Button3 sends ESC[6~ (Next) - and ESC[5~ (Prior), respectively. Similarly, clicking on the up and down - arrows sends ESC[A (Up) and ESC[B (Down), respectively. + application. Instead, pressing Button1 and Button3 sends ESC [ 6 ~ + (Next) and ESC [ 5 ~ (Prior), respectively. Similarly, clicking on the + up and down arrows sends ESC [ A (Up) and ESC [ B (Down), respectively. TEXT SELECTION AND INSERTION The behaviour of text selection and insertion mechanism is similar to @@ -758,25 +1043,36 @@ Left click at the beginning of the region, drag to the end of the region and release; Right click to extend the marked region; Left double-click to select a word; Left triple-click to select the - entire line. + entire logical line (which can span multiple screen lines), unless + modified by resource tripleclickwords. Starting a selection while pressing the Meta key (or Meta+Ctrl keys) - (Compile: frills) will create a rectangular selection instead of a - normal one. + (Compile: *frills*) will create a rectangular selection instead of a + normal one. In this mode, every selected row becomes its own line in + the selection, and trailing whitespace is visually underlined and + removed from the selection. Insertion: - Pressing and releasing the Middle mouse button (or Shift-Insert) in - an rxvt window causes the current text selection to be inserted as - if it had been typed on the keyboard. + Pressing and releasing the Middle mouse button in an rxvt window + causes the value of the PRIMARY selection (or CLIPBOARD with the + Meta modifier) to be inserted as if it had been typed on the + keyboard. + + Pressing Shift-Insert causes the value of the PRIMARY selection to + be inserted too. CHANGING FONTS Changing fonts (or font sizes, respectively) via the keypad is not yet supported in rxvt-unicode. Bug me if you need this. - You can, however, switch fonts at runtime using escape sequences (and - therefore using the menubar), e.g.: + You can, however, switch fonts at runtime using escape sequences, e.g.: + + printf '\e]710;%s\007' "9x15bold,xft:Kochi Gothic" + + You can use keyboard shortcuts, too: - printf '\e]701;%s\007' "9x15bold,xft:Kochi Gothic" + URxvt.keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007 + URxvt.keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007 rxvt-unicode will automatically re-apply these fonts to the output so far. @@ -788,7 +1084,7 @@ the rest is available when rxvt-unicode was compiled with "--enable-iso14755". - 5.1: Basic method + * 5.1: Basic method This allows you to enter unicode characters using their hexcode. Start by pressing and holding both "Control" and "Shift", then enter @@ -804,7 +1100,7 @@ easily by pressing "Control" and "Shift", followed by "6-7-1-D-SPACE-6-5-E-5", followed by releasing the modifier keys. - 5.2: Keyboard symbols entry method + * 5.2: Keyboard symbols entry method This mode lets you input characters representing the keycap symbols of your keyboard, if representable in the current locale encoding. @@ -816,12 +1112,12 @@ enter the symbol for "ISO Level 2 Switch", although your intention might have been to enter a reverse tab (Shift-Tab). - 5.3: Screen-selection entry method + * 5.3: Screen-selection entry method While this is implemented already (it's basically the selection mechanism), it could be extended by displaying a unicode character map. - 5.4: Feedback method for identifying displayed characters for later + * 5.4: Feedback method for identifying displayed characters for later input This method lets you display the unicode character code associated with characters already displayed. @@ -843,13 +1139,13 @@ LOGIN STAMP rxvt tries to write an entry into the *utmp*(5) file so that it can be seen via the *who(1)* command, and can accept messages. To allow this - feature, rxvt must be installed setuid root on some systems. + feature, rxvt may need to be installed setuid root on some systems or + setgid to root or to some other group on others. COLORS AND GRAPHICS In addition to the default foreground and background colours, rxvt can display up to 16 colours (8 ANSI colours plus high-intensity bold/blink - versions of the same). Here is a list of the colours with their rgb.txt - names. + versions of the same). Here is a list of the colours with their names. color0 (black) = Black color1 (red) = Red3 @@ -875,6 +1171,17 @@ 0-15, as a convenient shorthand to reference the colour name of color0-color15. + If Xft support has been compiled in and as long as Xft/Xrender/X don't + get their act together, rxvt-unicode will support + "rgba:rrrr/gggg/bbbb/aaaa" (recommended, but MUST have 4 + digits/component), "#ARGB", "#AARRGGBB" and "#AAAARRRRGGGGBBBB" colour + specifications, in addition to the ones provided by X, where the + additional A component specifies alpha (opacity) values (0 is completely + transparent and the maximum is opaque). You probably need to specify + "-depth 32", too, and have the luck that your X-server uses ARGB pixel + layout, as X is far from just supporting ARGB visuals out of the box, + and rxvt-unicode just fudges around. + Note that -rv ("reverseVideo: True") simulates reverse video by always swapping the foreground/background colours. This is in contrast to *xterm*(1) where the colours are only swapped if they have not otherwise @@ -885,37 +1192,72 @@ on White. ENVIRONMENT - rxvt sets the environment variables TERM, COLORTERM and COLORFGBG. The - environment variable WINDOWID is set to the X window id number of the - rxvt window and it also uses and sets the environment variable DISPLAY - to specify which display terminal to use. rxvt uses the environment - variables RXVTPATH and PATH to find XPM files. + rxvt sets and/or uses the following environment variables: -FILES - /etc/utmp - System file for login records. + TERM + Normally set to "rxvt-unicode", unless overwritten at configure + time, via resources or on the commandline. + + COLORTERM + Either "rxvt", "rxvt-xpm", depending on wether rxvt was compiled + with XPM support, and optionally with the added extension "-mono" to + indicate that rxvt-unicode runs on a monochrome screen. + + COLORFGBG + Set to a string of the form "fg;bg" or "fg;xpm;bg", where "fg" is + the colour code used as default foreground/text colour (or the + string "default" to indicate that the default-colour escape sequence + is to be used), "bg" is the colour code used as default background + colour (or the string "default"), and "xpm" is the string "default" + if rxvt was compiled with XPM support. Libraries like "ncurses" and + "slang" can (and do) use this information to optimize screen output. + + WINDOWID + Set to the (decimal) X Window ID of the rxvt window (the toplevel + window, which usually has subwindows for the scrollbar, the terminal + window and so on). + + TERMINFO + Set to the terminfo directory iff rxvt was configured with + "--with-terminfo=PATH". + + DISPLAY + Used by rxvt to connect to the display and set to the correct + display in it's child processes. + + SHELL + The shell to be used for command execution, defaults to "/bin/sh". + + RXVT_SOCKET + The unix domain socket path used by rxvtc(1) and rxvtd(1). + + Default $HOME/.rxvt-unicode-* - + AUTHORS John Bovey @@ -936,13 +1278,16 @@ Project Coordinator (changes.txt 2.21a to 2.4.5) Geoff Wing - Rewrote screen display and text selection routines. Project - Coordinator (changes.txt 2.4.6 - rxvt-unicode) + Rewrote screen display and text selection routines. - Marc Alexander Lehmann - Forked rxvt-unicode, rewrote most of the display code and internal - character handling to store text in unicode, improve xterm - compatibility and apply numerous other bugfixes and extensions. + Project Coordinator (changes.txt 2.4.6 - rxvt-unicode) + + Marc Alexander Lehmann + Forked rxvt-unicode, unicode support, rewrote almost all the code, + perl extension, random hacks, numerous bugfixes and extensions. Project Coordinator (Changes 1.0 -) + Emanuele Giaquinta + Pty/tty/utmp/wtmp rewrite, lots of random hacking and bugfixing. +