[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.7.man.in

Comparing rxvt-unicode/doc/rxvt.7.man.in (file contents):
Revision 1.54 by root, Sat Jan 28 22:16:58 2006 UTC vs.
Revision 1.77 by root, Thu Jul 6 19:43:21 2006 UTC

-.\" Automatically generated by Pod::Man v1.37, Pod::Parser v1.14
+.\" Automatically generated by Pod::Man 2.09 (Pod::Simple 3.04)
 .\"
 .\" Standard preamble:
 .\" ========================================================================
 .de Sh \" Subsection heading
 .br
 .    ds Ae AE
 .\}
 .rm #[ #] #H #V #F C
 .\" ========================================================================
 .\"
-.IX Title "rxvt 7"
+.IX Title "@@RXVT_NAME@@ 7"
-.TH rxvt 7 "2006-01-28" "7.4" "RXVT-UNICODE"
+.TH @@RXVT_NAME@@ 7 "2006-07-06" "7.7" "RXVT-UNICODE"
 .SH "NAME"
 RXVT REFERENCE \- FAQ, command sequences and other background information
 .SH "SYNOPSIS"
 .IX Header "SYNOPSIS"
 .Vb 2
 \&   # set a new font set
 \&   printf '\e33]50;%s\e007' 9x15,xft:Kochi" Mincho"
-.Ve
+\&
-.PP
-.Vb 2
-\&   # change the locale and tell rxvt-unicode about it
+\&   # change the locale and tell rxvt\-unicode about it
-\&   export LC_CTYPE=ja_JP.EUC-JP; printf "\e33]701;$LC_CTYPE\e007"
+\&   export LC_CTYPE=ja_JP.EUC\-JP; printf "\e33]701;$LC_CTYPE\e007"
-.Ve
+\&
-.PP
-.Vb 2
 \&   # set window title
 \&   printf '\e33]2;%s\e007' "new window title"
 .Ve
 .SH "DESCRIPTION"
 .IX Header "DESCRIPTION"
 This document contains the \s-1FAQ\s0, the \s-1RXVT\s0 \s-1TECHNICAL\s0 \s-1REFERENCE\s0 documenting
 all escape sequences, and other background information.
 .PP
-The newest version of this document is
+The newest version of this document is also available on the World Wide Web at
-also available on the World Wide Web at
 <http://cvs.schmorp.de/browse/*checkout*/rxvt\-unicode/doc/rxvt.7.html>.
-.SH "FREQUENTLY ASKED QUESTIONS"
+.SH "RXVT\-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS"
-.IX Header "FREQUENTLY ASKED QUESTIONS"
+.IX Header "RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS"
-.IP "The new selection selects pieces that are too big, how can I select single words?" 4
+.Sh "Meta, Features & Commandline Issues"
-.IX Item "The new selection selects pieces that are too big, how can I select single words?"
+.IX Subsection "Meta, Features & Commandline Issues"
-Yes. For example, if you want to select alphanumeric words, you can use
+\fIMy question isn't answered here, can I ask a human?\fR
-the following resource:
+.IX Subsection "My question isn't answered here, can I ask a human?"
-.Sp
+.PP
+Before sending me mail, you could go to \s-1IRC:\s0 \f(CW\*(C`irc.freenode.net\*(C'\fR,
+channel \f(CW\*(C`#rxvt\-unicode\*(C'\fR has some rxvt-unicode enthusiasts that might be
+interested in learning about new and exciting problems (but not FAQs :).
+.PP
+\fIDoes it support tabs, can I have a tabbed rxvt\-unicode?\fR
+.IX Subsection "Does it support tabs, can I have a tabbed rxvt-unicode?"
+.PP
+Beginning with version 7.3, there is a perl extension that implements a
+simple tabbed terminal. It is installed by default, so any of these should
+give you tabs:
+.PP
 .Vb 1
-\&   URxvt.selection.pattern-0: ([[:word:]]+)
+\&   @@URXVT_NAME@@ \-pe tabbed
+\&
+\&   URxvt.perl\-ext\-common: default,tabbed
 .Ve
-.Sp
+.PP
-If you click more than twice, the selection will be extended
+It will also work fine with tabbing functionality of many window managers
-more and more.
+or similar tabbing programs, and its embedding-features allow it to be
-.Sp
+embedded into other programs, as witnessed by \fIdoc/rxvt\-tabbed\fR or
-To get a selection that is very similar to the old code, try this pattern:
+the upcoming \f(CW\*(C`Gtk2::URxvt\*(C'\fR perl module, which features a tabbed urxvt
-.Sp
+(murxvt) terminal as an example embedding application.
+.PP
+\fIHow do I know which rxvt-unicode version I'm using?\fR
+.IX Subsection "How do I know which rxvt-unicode version I'm using?"
+.PP
+The version number is displayed with the usage (\-h). Also the escape
+sequence \f(CW\*(C`ESC [ 8 n\*(C'\fR sets the window title to the version number. When
+using the @@URXVT_NAME@@c client, the version displayed is that of the
+daemon.
+.PP
+\fIRxvt-unicode uses gobs of memory, how can I reduce that?\fR
+.IX Subsection "Rxvt-unicode uses gobs of memory, how can I reduce that?"
+.PP
+Rxvt-unicode tries to obey the rule of not charging you for something you
+don't use. One thing you should try is to configure out all settings that
+you don't need, for example, Xft support is a resource hog by design,
+when used. Compiling it out ensures that no Xft font will be loaded
+accidentally when rxvt-unicode tries to find a font for your characters.
+.PP
+Also, many people (me included) like large windows and even larger
+scrollback buffers: Without \f(CW\*(C`\-\-enable\-unicode3\*(C'\fR, rxvt-unicode will use
+6 bytes per screen cell. For a 160x?? window this amounts to almost a
+kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
+use 10 Megabytes of memory. With \f(CW\*(C`\-\-enable\-unicode3\*(C'\fR it gets worse, as
+rxvt-unicode then uses 8 bytes per screen cell.
+.PP
+\fIHow can I start @@URXVT_NAME@@d in a race-free way?\fR
+.IX Subsection "How can I start @@URXVT_NAME@@d in a race-free way?"
+.PP
+Try \f(CW\*(C`@@URXVT_NAME@@d \-f \-o\*(C'\fR, which tells @@URXVT_NAME@@d to open the
+display, create the listening socket and then fork.
+.PP
+\fIHow can I start @@URXVT_NAME@@d automatically when I run URXVT_NAME@@c?\fR
+.IX Subsection "How can I start @@URXVT_NAME@@d automatically when I run URXVT_NAME@@c?"
+.PP
+If you want to start @@URXVT_NAME@@d automatically whenever you run
+@@URXVT_NAME@@c and the daemon isn't running yet, use this script:
+.PP
+.Vb 6
+\&   #!/bin/sh
+\&   @@URXVT_NAME@@c "$@"
+\&   if [ $? \-eq 2 ]; then
+\&      @@URXVT_NAME@@d \-q \-o \-f
+\&      @@URXVT_NAME@@c "$@"
+\&   fi
+.Ve
+.PP
+This tries to create a new terminal, and if fails with exit status 2,
+meaning it couldn't connect to the daemon, it will start the daemon and
+re-run the command. Subsequent invocations of the script will re-use the
+existing daemon.
+.PP
+\fIHow do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.\fR
+.IX Subsection "How do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc."
+.PP
+The original rxvt and rxvt-unicode always export the variable \*(L"\s-1COLORTERM\s0\*(R",
+so you can check and see if that is set. Note that several programs, \s-1JED\s0,
+slrn, Midnight Commander automatically check this variable to decide
+whether or not to use color.
+.PP
+\fIHow do I set the correct, full \s-1IP\s0 address for the \s-1DISPLAY\s0 variable?\fR
+.IX Subsection "How do I set the correct, full IP address for the DISPLAY variable?"
+.PP
+If you've compiled rxvt-unicode with \s-1DISPLAY_IS_IP\s0 and have enabled
+insecure mode then it is possible to use the following shell script
+snippets to correctly set the display. If your version of rxvt-unicode
+wasn't also compiled with \s-1ESCZ_ANSWER\s0 (as assumed in these snippets) then
+the \s-1COLORTERM\s0 variable can be used to distinguish rxvt-unicode from a
+regular xterm.
+.PP
+Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
+snippets:
+.PP
-.Vb 1
+.Vb 12
-\&   URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\e\e\e\e]^`{|})]+)
+\&   # Bourne/Korn/POSIX family of shells:
+\&   [ ${TERM:\-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
+\&   if [ ${TERM:\-foo} = xterm ]; then
+\&      stty \-icanon \-echo min 0 time 15 # see if enhanced rxvt or not
+\&      echo \-n '^[Z'
+\&      read term_id
+\&      stty icanon echo
+\&      if [ ""${term_id} = '^[[?1;2C' \-a ${DISPLAY:\-foo} = foo ]; then
+\&         echo \-n '^[[7n'        # query the rxvt we are in for the DISPLAY string
+\&         read DISPLAY           # set it in our local shell
+\&      fi
+\&   fi
 .Ve
-.Sp
+.PP
-Please also note that the \fILeftClick Shift-LeftClik\fR combination also
+\fIHow do I compile the manual pages on my own?\fR
-selects words like the old code.
+.IX Subsection "How do I compile the manual pages on my own?"
-.IP "I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?" 4
+.PP
-.IX Item "I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?"
+You need to have a recent version of perl installed as \fI/usr/bin/perl\fR,
-You can disable the perl extension completely by setting the
+one that comes with \fIpod2man\fR, \fIpod2text\fR and \fIpod2html\fR. Then go to
-\&\fBperl-ext-common\fR resource to the empty string, which also keeps
+the doc subdirectory and enter \f(CW\*(C`make alldoc\*(C'\fR.
-rxvt-unicode from initialising perl, saving memory.
+.PP
-.Sp
-If you only want to disable specific features, you first have to
-identify which perl extension is responsible. For this, read the section
-\&\fB\s-1PREPACKAGED\s0 \s-1EXTENSIONS\s0\fR in the @@RXVT_NAME@@\fIperl\fR\|(3) manpage. For
-example, to disable the \fBselection-popup\fR and \fBoption-popup\fR, specify
-this \fBperl-ext-common\fR resource:
-.Sp
-.Vb 1
-\&   URxvt.perl-ext-common: default,-selection-popup,-option-popup
-.Ve
-.Sp
-This will keep the default extensions, but disable the two popup
-extensions. Some extensions can also be configured, for example,
-scrollback search mode is triggered by \fBM\-s\fR. You can move it to any
-other combination either by setting the \fBsearchable-scrollback\fR resource:
-.Sp
-.Vb 1
-\&   URxvt.searchable-scrollback: CM-s
-.Ve
-.IP "Isn't rxvt supposed to be small? Don't all those features bloat?" 4
+\fIIsn't rxvt-unicode supposed to be small? Don't all those features bloat?\fR
-.IX Item "Isn't rxvt supposed to be small? Don't all those features bloat?"
+.IX Subsection "Isn't rxvt-unicode supposed to be small? Don't all those features bloat?"
+.PP
 I often get asked about this, and I think, no, they didn't cause extra
 bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
 that the urxvt binary is larger (due to some encoding tables always being
 compiled in), but it actually uses less memory (\s-1RSS\s0) after startup. Even
 with \f(CW\*(C`\-\-disable\-everything\*(C'\fR, this comparison is a bit unfair, as many
 features unique to urxvt (locale, encoding conversion, iso14755 etc.) are
 already in use in this mode.
-.Sp
+.PP
 .Vb 3
 \&    text    data     bss     drs     rss filename
-\&   98398    1664      24   15695    1824 rxvt --disable-everything
+\&   98398    1664      24   15695    1824 rxvt \-\-disable\-everything
-\&  188985    9048   66616   18222    1788 urxvt --disable-everything
+\&  188985    9048   66616   18222    1788 urxvt \-\-disable\-everything
 .Ve
-.Sp
+.PP
-When you \f(CW\*(C`\-\-enable\-everything\*(C'\fR (which _is_ unfair, as this involves xft
+When you \f(CW\*(C`\-\-enable\-everything\*(C'\fR (which \fIis\fR unfair, as this involves xft
 and full locale/XIM support which are quite bloaty inside libX11 and my
 libc), the two diverge, but not unreasnobaly so.
-.Sp
+.PP
 .Vb 3
 \&    text    data     bss     drs     rss filename
-\&  163431    2152      24   20123    2060 rxvt --enable-everything
+\&  163431    2152      24   20123    2060 rxvt \-\-enable\-everything
-\& 1035683   49680   66648   29096    3680 urxvt --enable-everything
+\& 1035683   49680   66648   29096    3680 urxvt \-\-enable\-everything
 .Ve
-.Sp
+.PP
 The very large size of the text section is explained by the east-asian
 encoding tables, which, if unused, take up disk space but nothing else
 and can be compiled out unless you rely on X11 core fonts that use those
 encodings. The \s-1BSS\s0 size comes from the 64k emergency buffer that my c++
 compiler allocates (but of course doesn't use unless you are out of
 memory). Also, using an xft font instead of a core font immediately adds a
 few megabytes of \s-1RSS\s0. Xft indeed is responsible for a lot of \s-1RSS\s0 even when
 not used.
-.Sp
+.PP
 Of course, due to every character using two or four bytes instead of one,
 a large scrollback buffer will ultimately make rxvt-unicode use more
 memory.
-.Sp
+.PP
 Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), this
 still fares rather well. And compared to some monsters like gnome-terminal
 (21152k + extra 4204k in separate processes) or konsole (22200k + extra
 43180k in daemons that stay around after exit, plus half a minute of
 startup time, including the hundreds of warnings it spits out), it fares
 extremely well *g*.
+.PP
-.IP "Why \*(C+, isn't that unportable/bloated/uncool?" 4
+\fIWhy \*(C+, isn't that unportable/bloated/uncool?\fR
-.IX Item "Why , isn't that unportable/bloated/uncool?"
+.IX Subsection "Why , isn't that unportable/bloated/uncool?"
+.PP
 Is this a question? :) It comes up very often. The simple answer is: I had
 to write it, and \*(C+ allowed me to write and maintain it in a fraction
 of the time and effort (which is a scarce resource for me). Put even
 shorter: It simply wouldn't exist without \*(C+.
-.Sp
+.PP
 My personal stance on this is that \*(C+ is less portable than C, but in
 the case of rxvt-unicode this hardly matters, as its portability limits
 are defined by things like X11, pseudo terminals, locale support and unix
 domain sockets, which are all less portable than \*(C+ itself.
-.Sp
+.PP
 Regarding the bloat, see the above question: It's easy to write programs
 in C that use gobs of memory, an certainly possible to write programs in
 \&\*(C+ that don't. \*(C+ also often comes with large libraries, but this is
 not necessarily the case with \s-1GCC\s0. Here is what rxvt links against on my
 system with a minimal config:
-.Sp
+.PP
 .Vb 4
 \&   libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
 \&   libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000)
 \&   libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000)
-\&   /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
+\&   /lib64/ld\-linux\-x86\-64.so.2 (0x00002aaaaaaab000)
 .Ve
-.Sp
+.PP
 And here is rxvt\-unicode:
-.Sp
+.PP
 .Vb 5
 \&   libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
 \&   libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
 \&   libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
 \&   libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
-\&   /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
+\&   /lib64/ld\-linux\-x86\-64.so.2 (0x00002aaaaaaab000)
 .Ve
-.Sp
+.PP
 No large bloated libraries (of course, none were linked in statically),
 except maybe libX11 :)
-.IP "Does it support tabs, can I have a tabbed rxvt\-unicode?" 4
+.Sh "Rendering, Font & Look and Feel Issues"
-.IX Item "Does it support tabs, can I have a tabbed rxvt-unicode?"
+.IX Subsection "Rendering, Font & Look and Feel Issues"
-Beginning with version 7.3, there is a perl extension that implements a
+\fII can't get transparency working, what am I doing wrong?\fR
-simple tabbed terminal. It is installed by default, so any of these should
+.IX Subsection "I can't get transparency working, what am I doing wrong?"
-give you tabs:
+.PP
-.Sp
+First of all, transparency isn't officially supported in rxvt\-unicode, so
+you are mostly on your own. Do not bug the author about it (but you may
+bug everybody else). Also, if you can't get it working consider it a rite
+of passage: ... and you failed.
+.PP
+Here are four ways to get transparency. \fBDo\fR read the manpage and option
+descriptions for the programs mentioned and rxvt\-unicode. Really, do it!
+.PP
+1. Use inheritPixmap:
+.PP
+.Vb 2
+\&   Esetroot wallpaper.jpg
+\&   @@URXVT_NAME@@ \-ip \-tint red \-sh 40
+.Ve
+.PP
+That works. If you think it doesn't, you lack transparency and tinting
+support, or you are unable to read.
+.PP
+2. Use a simple pixmap and emulate pseudo\-transparency. This enables you
+to use effects other than tinting and shading: Just shade/tint/whatever
+your picture with gimp or any other tool:
+.PP
+.Vb 2
+\&   convert wallpaper.jpg \-blur 20x20 \-modulate 30 background.xpm
+\&   @@URXVT_NAME@@ \-pixmap background.xpm \-pe automove\-background
+.Ve
+.PP
+That works. If you think it doesn't, you lack \s-1XPM\s0 and Perl support, or you
+are unable to read.
+.PP
+3. Use an \s-1ARGB\s0 visual:
+.PP
 .Vb 1
-\&   @@RXVT_NAME@@ -pe tabbed
+\&   @@URXVT_NAME@@ \-depth 32 \-fg grey90 \-bg rgba:0000/0000/4444/cccc
 .Ve
-.Sp
+.PP
+This requires \s-1XFT\s0 support, and the support of your X\-server. If that
+doesn't work for you, blame Xorg and Keith Packard. \s-1ARGB\s0 visuals aren't
+there yet, no matter what they claim. Rxvt-Unicode contains the neccessary
+bugfixes and workarounds for Xft and Xlib to make it work, but that
+doesn't mean that your \s-1WM\s0 has the required kludges in place.
+.PP
+4. Use xcompmgr and let it do the job:
+.PP
+.Vb 2
+\&  xprop \-frame \-f _NET_WM_WINDOW_OPACITY 32c \e
+\&        \-set _NET_WM_WINDOW_OPACITY 0xc0000000
+.Ve
+.PP
+Then click on a window you want to make transparent. Replace \f(CW0xc0000000\fR
+by other values to change the degree of opacity. If it doesn't work and
+your server crashes, you got to keep the pieces.
+.PP
+\fIWhy does rxvt-unicode sometimes leave pixel droppings?\fR
+.IX Subsection "Why does rxvt-unicode sometimes leave pixel droppings?"
+.PP
+Most fonts were not designed for terminal use, which means that character
+size varies a lot. A font that is otherwise fine for terminal use might
+contain some characters that are simply too wide. Rxvt-unicode will avoid
+these characters. For characters that are just \*(L"a bit\*(R" too wide a special
+\&\*(L"careful\*(R" rendering mode is used that redraws adjacent characters.
+.PP
+All of this requires that fonts do not lie about character sizes,
+however: Xft fonts often draw glyphs larger than their acclaimed bounding
+box, and rxvt-unicode has no way of detecting this (the correct way is to
+ask for the character bounding box, which unfortunately is wrong in these
+cases).
+.PP
+It's not clear (to me at least), wether this is a bug in Xft, freetype,
+or the respective font. If you encounter this problem you might try using
+the \f(CW\*(C`\-lsp\*(C'\fR option to give the font more height. If that doesn't work, you
+might be forced to use a different font.
+.PP
+All of this is not a problem when using X11 core fonts, as their bounding
+box data is correct.
+.PP
+\fIHow can I keep rxvt-unicode from using reverse video so much?\fR
+.IX Subsection "How can I keep rxvt-unicode from using reverse video so much?"
+.PP
+First of all, make sure you are running with the right terminal settings
+(\f(CW\*(C`TERM=rxvt\-unicode\*(C'\fR), which will get rid of most of these effects. Then
+make sure you have specified colours for italic and bold, as otherwise
+rxvt-unicode might use reverse video to simulate the effect:
+.PP
+.Vb 2
+\&   URxvt.colorBD:  white
+\&   URxvt.colorIT:  green
+.Ve
+.PP
+\fISome programs assume totally weird colours (red instead of blue), how can I fix that?\fR
+.IX Subsection "Some programs assume totally weird colours (red instead of blue), how can I fix that?"
+.PP
+For some unexplainable reason, some rare programs assume a very weird
+colour palette when confronted with a terminal with more than the standard
+8 colours (rxvt\-unicode supports 88). The right fix is, of course, to fix
+these programs not to assume non-ISO colours without very good reasons.
+.PP
+In the meantime, you can either edit your \f(CW\*(C`rxvt\-unicode\*(C'\fR terminfo
+definition to only claim 8 colour support or use \f(CW\*(C`TERM=rxvt\*(C'\fR, which will
+fix colours but keep you from using other rxvt-unicode features.
+.PP
+\fICan I switch the fonts at runtime?\fR
+.IX Subsection "Can I switch the fonts at runtime?"
+.PP
+Yes, using an escape sequence. Try something like this, which has the same
+effect as using the \f(CW\*(C`\-fn\*(C'\fR switch, and takes effect immediately:
+.PP
 .Vb 1
+\&   printf '\e33]50;%s\e007' "9x15bold,xft:Kochi Gothic"
+.Ve
+.PP
+This is useful if you e.g. work primarily with japanese (and prefer a
+japanese font), but you have to switch to chinese temporarily, where
+japanese fonts would only be in your way.
+.PP
+You can think of this as a kind of manual \s-1ISO\-2022\s0 switching.
+.PP
+\fIWhy do italic characters look as if clipped?\fR
+.IX Subsection "Why do italic characters look as if clipped?"
+.PP
+Many fonts have difficulties with italic characters and hinting. For
+example, the otherwise very nicely hinted font \f(CW\*(C`xft:Bitstream Vera Sans
+Mono\*(C'\fR completely fails in its italic face. A workaround might be to
+enable freetype autohinting, i.e. like this:
+.PP
+.Vb 2
+\&   URxvt.italicFont:        xft:Bitstream Vera Sans Mono:italic:autohint=true
+\&   URxvt.boldItalicFont:    xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
+.Ve
+.PP
+\fICan I speed up Xft rendering somehow?\fR
+.IX Subsection "Can I speed up Xft rendering somehow?"
+.PP
+Yes, the most obvious way to speed it up is to avoid Xft entirely, as
+it is simply slow. If you still want Xft fonts you might try to disable
+antialiasing (by appending \f(CW\*(C`:antialias=false\*(C'\fR), which saves lots of
+memory and also speeds up rendering considerably.
+.PP
+\fIRxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?\fR
+.IX Subsection "Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?"
+.PP
+Rxvt-unicode will use whatever you specify as a font. If it needs to
+fall back to its default font search list it will prefer X11 core
+fonts, because they are small and fast, and then use Xft fonts. It has
+antialiasing disabled for most of them, because the author thinks they
+look best that way.
+.PP
+If you want antialiasing, you have to specify the fonts manually.
+.PP
+\fIWhat's with this bold/blink stuff?\fR
+.IX Subsection "What's with this bold/blink stuff?"
+.PP
+If no bold colour is set via \f(CW\*(C`colorBD:\*(C'\fR, bold will invert text using the
+standard foreground colour.
+.PP
+For the standard background colour, blinking will actually make the
+text blink when compiled with \f(CW\*(C`\-\-enable\-blinking\*(C'\fR. with standard
+colours. Without \f(CW\*(C`\-\-enable\-blinking\*(C'\fR, the blink attribute will be
+ignored.
+.PP
+On \s-1ANSI\s0 colours, bold/blink attributes are used to set high-intensity
+foreground/background colors.
+.PP
+color0\-7 are the low-intensity colors.
+.PP
+color8\-15 are the corresponding high-intensity colors.
+.PP
+\fII don't like the screen colors.  How do I change them?\fR
+.IX Subsection "I don't like the screen colors.  How do I change them?"
+.PP
+You can change the screen colors at run-time using \fI~/.Xdefaults\fR
+resources (or as long\-options).
+.PP
+Here are values that are supposed to resemble a \s-1VGA\s0 screen,
+including the murky brown that passes for low-intensity yellow:
+.PP
+.Vb 8
+\&   URxvt.color0:   #000000
+\&   URxvt.color1:   #A80000
+\&   URxvt.color2:   #00A800
+\&   URxvt.color3:   #A8A800
+\&   URxvt.color4:   #0000A8
+\&   URxvt.color5:   #A800A8
+\&   URxvt.color6:   #00A8A8
+\&   URxvt.color7:   #A8A8A8
+\&
+\&   URxvt.color8:   #000054
+\&   URxvt.color9:   #FF0054
+\&   URxvt.color10:  #00FF54
+\&   URxvt.color11:  #FFFF54
+\&   URxvt.color12:  #0000FF
+\&   URxvt.color13:  #FF00FF
+\&   URxvt.color14:  #00FFFF
+\&   URxvt.color15:  #FFFFFF
+.Ve
+.PP
+And here is a more complete set of non-standard colors.
+.PP
+.Vb 10
+\&   URxvt.cursorColor:  #dc74d1
+\&   URxvt.pointerColor: #dc74d1
+\&   URxvt.background:   #0e0e0e
+\&   URxvt.foreground:   #4ad5e1
+\&   URxvt.color0:       #000000
+\&   URxvt.color8:       #8b8f93
+\&   URxvt.color1:       #dc74d1
+\&   URxvt.color9:       #dc74d1
+\&   URxvt.color2:       #0eb8c7
+\&   URxvt.color10:      #0eb8c7
+\&   URxvt.color3:       #dfe37e
+\&   URxvt.color11:      #dfe37e
+\&   URxvt.color5:       #9e88f0
+\&   URxvt.color13:      #9e88f0
+\&   URxvt.color6:       #73f7ff
+\&   URxvt.color14:      #73f7ff
+\&   URxvt.color7:       #e1dddd
+\&   URxvt.color15:      #e1dddd
+.Ve
+.PP
+They have been described (not by me) as \*(L"pretty girly\*(R".
+.PP
+\fIWhy do some characters look so much different than others?\fR
+.IX Subsection "Why do some characters look so much different than others?"
+.PP
+See next entry.
+.PP
+\fIHow does rxvt-unicode choose fonts?\fR
+.IX Subsection "How does rxvt-unicode choose fonts?"
+.PP
+Most fonts do not contain the full range of Unicode, which is
+fine. Chances are that the font you (or the admin/package maintainer of
+your system/os) have specified does not cover all the characters you want
+to display.
+.PP
+\&\fBrxvt-unicode\fR makes a best-effort try at finding a replacement
+font. Often the result is fine, but sometimes the chosen font looks
+bad/ugly/wrong. Some fonts have totally strange characters that don't
+resemble the correct glyph at all, and rxvt-unicode lacks the artificial
+intelligence to detect that a specific glyph is wrong: it has to believe
+the font that the characters it claims to contain indeed look correct.
+.PP
+In that case, select a font of your taste and add it to the font list,
+e.g.:
+.PP
+.Vb 1
+\&   @@URXVT_NAME@@ \-fn basefont,font2,font3...
+.Ve
+.PP
+When rxvt-unicode sees a character, it will first look at the base
+font. If the base font does not contain the character, it will go to the
+next font, and so on. Specifying your own fonts will also speed up this
+search and use less resources within rxvt-unicode and the X\-server.
+.PP
+The only limitation is that none of the fonts may be larger than the base
+font, as the base font defines the terminal character cell size, which
+must be the same due to the way terminals work.
+.PP
+\fIWhy do some chinese characters look so different than others?\fR
+.IX Subsection "Why do some chinese characters look so different than others?"
+.PP
+This is because there is a difference between script and language \*(--
+rxvt-unicode does not know which language the text that is output is,
+as it only knows the unicode character codes. If rxvt-unicode first
+sees a japanese/chinese character, it might choose a japanese font for
+display. Subsequent japanese characters will use that font. Now, many
+chinese characters aren't represented in japanese fonts, so when the first
+non-japanese character comes up, rxvt-unicode will look for a chinese font
+\&\*(-- unfortunately at this point, it will still use the japanese font for
+chinese characters that are also in the japanese font.
+.PP
+The workaround is easy: just tag a chinese font at the end of your font
+list (see the previous question). The key is to view the font list as
+a preference list: If you expect more japanese, list a japanese font
+first. If you expect more chinese, put a chinese font first.
+.PP
+In the future it might be possible to switch language preferences at
+runtime (the internal data structure has no problem with using different
+fonts for the same character at the same time, but no interface for this
+has been designed yet).
+.PP
+Until then, you might get away with switching fonts at runtime (see \*(L"Can
+I switch the fonts at runtime?\*(R" later in this document).
+.Sh "Keyboard, Mouse & User Interaction"
+.IX Subsection "Keyboard, Mouse & User Interaction"
+\fIThe new selection selects pieces that are too big, how can I select single words?\fR
+.IX Subsection "The new selection selects pieces that are too big, how can I select single words?"
+.PP
+If you want to select e.g. alphanumeric words, you can use the following
+setting:
+.PP
+.Vb 1
+\&   URxvt.selection.pattern\-0: ([[:word:]]+)
+.Ve
+.PP
+If you click more than twice, the selection will be extended
+more and more.
+.PP
+To get a selection that is very similar to the old code, try this pattern:
+.PP
+.Vb 1
+\&   URxvt.selection.pattern\-0: ([^"&'()*,;<=>?@[\e\e\e\e]^`{|})]+)
+.Ve
+.PP
+Please also note that the \fILeftClick Shift-LeftClik\fR combination also
+selects words like the old code.
+.PP
+\fII don't like the new selection/popups/hotkeys/perl, how do I change/disable it?\fR
+.IX Subsection "I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?"
+.PP
+You can disable the perl extension completely by setting the
+\&\fBperl-ext-common\fR resource to the empty string, which also keeps
+rxvt-unicode from initialising perl, saving memory.
+.PP
+If you only want to disable specific features, you first have to
+identify which perl extension is responsible. For this, read the section
+\&\fB\s-1PREPACKAGED\s0 \s-1EXTENSIONS\s0\fR in the @@URXVT_NAME@@\fIperl\fR\|(3) manpage. For
+example, to disable the \fBselection-popup\fR and \fBoption-popup\fR, specify
+this \fBperl-ext-common\fR resource:
+.PP
+.Vb 1
+\&   URxvt.perl\-ext\-common: default,\-selection\-popup,\-option\-popup
+.Ve
+.PP
+This will keep the default extensions, but disable the two popup
+extensions. Some extensions can also be configured, for example,
+scrollback search mode is triggered by \fBM\-s\fR. You can move it to any
+other combination either by setting the \fBsearchable-scrollback\fR resource:
+.PP
+.Vb 1
+\&   URxvt.searchable\-scrollback: CM\-s
+.Ve
+.PP
+\fIThe cursor moves when selecting text in the current input line, how do I switch this off?\fR
+.IX Subsection "The cursor moves when selecting text in the current input line, how do I switch this off?"
+.PP
+See next entry.
+.PP
+\fIDuring rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?\fR
+.IX Subsection "During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?"
+.PP
+These are caused by the \f(CW\*(C`readline\*(C'\fR perl extension. Under normal
+circumstances, it will move your cursor around when you click into the
+line that contains it. It tries hard not to do this at the wrong moment,
+but when running a program that doesn't parse cursor movements or in some
+cases during rlogin sessions, it fails to detect this properly.
+.PP
+You can permamently switch this feature off by disabling the \f(CW\*(C`readline\*(C'\fR
+extension:
+.PP
+.Vb 1
-\&   URxvt.perl-ext-common: default,tabbed
+\&   URxvt.perl\-ext\-common: default,\-readline
 .Ve
-.Sp
+.PP
-It will also work fine with tabbing functionality of many window managers
+\fIMy numerical keypad acts weird and generates differing output?\fR
-or similar tabbing programs, and its embedding-features allow it to be
+.IX Subsection "My numerical keypad acts weird and generates differing output?"
-embedded into other programs, as witnessed by \fIdoc/rxvt\-tabbed\fR or
+.PP
-the upcoming \f(CW\*(C`Gtk2::URxvt\*(C'\fR perl module, which features a tabbed urxvt
+Some Debian GNUL/Linux users seem to have this problem, although no
-(murxvt) terminal as an example embedding application.
+specific details were reported so far. It is possible that this is caused
-.IP "How do I know which rxvt-unicode version I'm using?" 4
+by the wrong \f(CW\*(C`TERM\*(C'\fR setting, although the details of wether and how
-.IX Item "How do I know which rxvt-unicode version I'm using?"
+this can happen are unknown, as \f(CW\*(C`TERM=rxvt\*(C'\fR should offer a compatible
-The version number is displayed with the usage (\-h). Also the escape
+keymap. See the answer to the previous question, and please report if that
-sequence \f(CW\*(C`ESC [ 8 n\*(C'\fR sets the window title to the version number. When
+helped.
-using the @@RXVT_NAME@@c client, the version displayed is that of the
+.PP
-daemon.
+\fIMy Compose (Multi_key) key is no longer working.\fR
-.IP "I am using Debian GNU/Linux and have a problem..." 4
+.IX Subsection "My Compose (Multi_key) key is no longer working."
-.IX Item "I am using Debian GNU/Linux and have a problem..."
+.PP
-The Debian GNU/Linux package of rxvt-unicode in sarge contains large
+The most common causes for this are that either your locale is not set
-patches that considerably change the behaviour of rxvt-unicode (but
+correctly, or you specified a \fBpreeditStyle\fR that is not supported by
-unfortunately this notice has been removed). Before reporting a bug to
+your input method. For example, if you specified \fBOverTheSpot\fR and
-the original rxvt-unicode author please download and install the genuine
+your input method (e.g. the default input method handling Compose keys)
-version (<http://software.schmorp.de#rxvt\-unicode>) and try to reproduce
+does not support this (for instance because it is not visual), then
-the problem. If you cannot, chances are that the problems are specific to
+rxvt-unicode will continue without an input method.
-Debian GNU/Linux, in which case it should be reported via the Debian Bug
+.PP
-Tracking System (use \f(CW\*(C`reportbug\*(C'\fR to report the bug).
+In this case either do not specify a \fBpreeditStyle\fR or specify more than
-.Sp
+one pre-edit style, such as \fBOverTheSpot,Root,None\fR.
-For other problems that also affect the Debian package, you can and
+.PP
-probably should use the Debian \s-1BTS\s0, too, because, after all, it's also a
+\fII cannot type \f(CI\*(C`Ctrl\-Shift\-2\*(C'\fI to get an \s-1ASCII\s0 \s-1NUL\s0 character due to \s-1ISO\s0 14755\fR
-bug in the Debian version and it serves as a reminder for other users that
+.IX Subsection "I cannot type Ctrl-Shift-2 to get an ASCII NUL character due to ISO 14755"
-might encounter the same issue.
+.PP
-.IP "I am maintaining rxvt-unicode for distribution/OS \s-1XXX\s0, any recommendation?" 4
+Either try \f(CW\*(C`Ctrl\-2\*(C'\fR alone (it often is mapped to \s-1ASCII\s0 \s-1NUL\s0 even on
-.IX Item "I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?"
+international keyboards) or simply use \s-1ISO\s0 14755 support to your
-You should build one binary with the default options. \fIconfigure\fR
+advantage, typing <Ctrl\-Shift\-0> to get a \s-1ASCII\s0 \s-1NUL\s0. This works for other
-now enables most useful options, and the trend goes to making them
+codes, too, such as \f(CW\*(C`Ctrl\-Shift\-1\-d\*(C'\fR to type the default telnet escape
-runtime\-switchable, too, so there is usually no drawback to enbaling them,
+character and so on.
-except higher disk and possibly memory usage. The perl interpreter should
+.PP
-be enabled, as important functionality (menus, selection, likely more in
+\fIMouse cut/paste suddenly no longer works.\fR
-the future) depends on it.
+.IX Subsection "Mouse cut/paste suddenly no longer works."
-.Sp
+.PP
-You should not overwrite the \f(CW\*(C`perl\-ext\-common\*(C'\fR snd \f(CW\*(C`perl\-ext\*(C'\fR resources
+Make sure that mouse reporting is actually turned off since killing
-system-wide (except maybe with \f(CW\*(C`defaults\*(C'\fR). This will result in useful
+some editors prematurely may leave the mouse in mouse report mode. I've
-behaviour. If your distribution aims at low memory, add an empty
+heard that tcsh may use mouse reporting unless it otherwise specified. A
-\&\f(CW\*(C`perl\-ext\-common\*(C'\fR resource to the app-defaults file. This will keep the
+quick check is to see if cut/paste works when the Alt or Shift keys are
-perl interpreter disabled until the user enables it.
+depressed.
-.Sp
+.PP
-If you can/want build more binaries, I recommend building a minimal
+\fIWhat's with the strange Backspace/Delete key behaviour?\fR
-one with \f(CW\*(C`\-\-disable\-everything\*(C'\fR (very useful) and a maximal one with
+.IX Subsection "What's with the strange Backspace/Delete key behaviour?"
-\&\f(CW\*(C`\-\-enable\-everything\*(C'\fR (less useful, it will be very big due to a lot of
+.PP
-encodings built-in that increase download times and are rarely used).
+Assuming that the physical Backspace key corresponds to the
-.IP "I need to make it setuid/setgid to support utmp/ptys on my \s-1OS\s0, is this safe?" 4
+BackSpace keysym (not likely for Linux ... see the following
-.IX Item "I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?"
+question) there are two standard values that can be used for
-It should be, starting with release 7.1. You are encouraged to properly
+Backspace: \f(CW\*(C`^H\*(C'\fR and \f(CW\*(C`^?\*(C'\fR.
-install urxvt with privileges necessary for your \s-1OS\s0 now.
+.PP
-.Sp
+Historically, either value is correct, but rxvt-unicode adopts the debian
-When rxvt-unicode detects that it runs setuid or setgid, it will fork
+policy of using \f(CW\*(C`^?\*(C'\fR when unsure, because it's the one only only correct
-into a helper process for privileged operations (pty handling on some
+choice :).
-systems, utmp/wtmp/lastlog handling on others) and drop privileges
+.PP
-immediately. This is much safer than most other terminals that keep
+Rxvt-unicode tries to inherit the current stty settings and uses the value
-privileges while running (but is more relevant to urxvt, as it contains
+of `erase' to guess the value for backspace.  If rxvt-unicode wasn't
-things as perl interpreters, which might be \*(L"helpful\*(R" to attackers).
+started from a terminal (say, from a menu or by remote shell), then the
-.Sp
+system value of `erase', which corresponds to \s-1CERASE\s0 in <termios.h>, will
-This forking is done as the very first within \fImain()\fR, which is very early
+be used (which may not be the same as your stty setting).
-and reduces possible bugs to initialisation code run before \fImain()\fR, or
+.PP
-things like the dynamic loader of your system, which should result in very
+For starting a new rxvt\-unicode:
-little risk.
+.PP
+.Vb 3
+\&   # use Backspace = ^H
+\&   $ stty erase ^H
+\&   $ @@URXVT_NAME@@
+\&
+\&   # use Backspace = ^?
+\&   $ stty erase ^?
+\&   $ @@URXVT_NAME@@
+.Ve
+.PP
+Toggle with \f(CW\*(C`ESC [ 36 h\*(C'\fR / \f(CW\*(C`ESC [ 36 l\*(C'\fR.
+.PP
+For an existing rxvt\-unicode:
+.PP
+.Vb 3
+\&   # use Backspace = ^H
+\&   $ stty erase ^H
+\&   $ echo \-n "^[[36h"
+\&
+\&   # use Backspace = ^?
+\&   $ stty erase ^?
+\&   $ echo \-n "^[[36l"
+.Ve
+.PP
+This helps satisfy some of the Backspace discrepancies that occur, but
+if you use Backspace = \f(CW\*(C`^H\*(C'\fR, make sure that the termcap/terminfo value
+properly reflects that.
+.PP
+The Delete key is a another casualty of the ill-defined Backspace problem.
+To avoid confusion between the Backspace and Delete keys, the Delete
+key has been assigned an escape sequence to match the vt100 for Execute
+(\f(CW\*(C`ESC [ 3 ~\*(C'\fR) and is in the supplied termcap/terminfo.
+.PP
+Some other Backspace problems:
+.PP
+some editors use termcap/terminfo,
+some editors (vim I'm told) expect Backspace = ^H,
+\&\s-1GNU\s0 Emacs (and Emacs-like editors) use ^H for help.
+.PP
+Perhaps someday this will all be resolved in a consistent manner.
+.PP
+\fII don't like the key\-bindings.  How do I change them?\fR
+.IX Subsection "I don't like the key-bindings.  How do I change them?"
+.PP
+There are some compile-time selections available via configure. Unless
+you have run \*(L"configure\*(R" with the \f(CW\*(C`\-\-disable\-resources\*(C'\fR option you can
+use the `keysym' resource to alter the keystrings associated with keysyms.
+.PP
+Here's an example for a URxvt session started using \f(CW\*(C`@@URXVT_NAME@@ \-name URxvt\*(C'\fR
+.PP
+.Vb 10
+\&   URxvt.keysym.Home:          \e033[1~
+\&   URxvt.keysym.End:           \e033[4~
+\&   URxvt.keysym.C\-apostrophe:  \e033<C\-'>
+\&   URxvt.keysym.C\-slash:       \e033<C\-/>
+\&   URxvt.keysym.C\-semicolon:   \e033<C\-;>
+\&   URxvt.keysym.C\-grave:       \e033<C\-`>
+\&   URxvt.keysym.C\-comma:       \e033<C\-,>
+\&   URxvt.keysym.C\-period:      \e033<C\-.>
+\&   URxvt.keysym.C\-0x60:        \e033<C\-`>
+\&   URxvt.keysym.C\-Tab:         \e033<C\-Tab>
+\&   URxvt.keysym.C\-Return:      \e033<C\-Return>
+\&   URxvt.keysym.S\-Return:      \e033<S\-Return>
+\&   URxvt.keysym.S\-space:       \e033<S\-Space>
+\&   URxvt.keysym.M\-Up:          \e033<M\-Up>
+\&   URxvt.keysym.M\-Down:        \e033<M\-Down>
+\&   URxvt.keysym.M\-Left:        \e033<M\-Left>
+\&   URxvt.keysym.M\-Right:       \e033<M\-Right>
+\&   URxvt.keysym.M\-C\-0:         list \e033<M\-C\- 0123456789 >
+\&   URxvt.keysym.M\-C\-a:         list \e033<M\-C\- abcdefghijklmnopqrstuvwxyz >
+\&   URxvt.keysym.F12:           command:\e033]701;zh_CN.GBK\e007
+.Ve
+.PP
+See some more examples in the documentation for the \fBkeysym\fR resource.
+.PP
+\fII'm using keyboard model \s-1XXX\s0 that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map\fR
+.IX Subsection "I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map"
+.PP
+.Vb 6
+\&   KP_Insert == Insert
+\&   F22 == Print
+\&   F27 == Home
+\&   F29 == Prior
+\&   F33 == End
+\&   F35 == Next
+.Ve
+.PP
+Rather than have rxvt-unicode try to accommodate all the various possible
+keyboard mappings, it is better to use `xmodmap' to remap the keys as
+required for your particular machine.
+.Sh "Terminal Configuration"
+.IX Subsection "Terminal Configuration"
+\fICan I see a typical configuration?\fR
+.IX Subsection "Can I see a typical configuration?"
+.PP
+The default configuration tries to be xterm\-like, which I don't like that
+much, but it's least surprise to regular users.
+.PP
+As a rxvt or rxvt-unicode user, you are practically supposed to invest
+time into customising your terminal. To get you started, here is the
+author's .Xdefaults entries, with comments on what they do. It's certainly
+not \fItypical\fR, but what's typical...
+.PP
+.Vb 2
+\&   URxvt.cutchars: "()*,<>[]{}|'
+\&   URxvt.print\-pipe: cat >/tmp/xxx
+.Ve
+.PP
+These are just for testing stuff.
+.PP
+.Vb 2
+\&   URxvt.imLocale: ja_JP.UTF\-8
+\&   URxvt.preeditType: OnTheSpot,None
+.Ve
+.PP
+This tells rxvt-unicode to use a special locale when communicating with
+the X Input Method, and also tells it to only use the OnTheSpot pre-edit
+type, which requires the \f(CW\*(C`xim\-onthespot\*(C'\fR perl extension but rewards me
+with correct-looking fonts.
+.PP
+.Vb 6
+\&   URxvt.perl\-lib: /root/lib/urxvt
+\&   URxvt.perl\-ext\-common: default,selection\-autotransform,selection\-pastebin,xim\-onthespot,remote\-clipboard
+\&   URxvt.selection.pattern\-0: ( at .*? line \e\ed+)
+\&   URxvt.selection.pattern\-1: ^(/[^:]+):\e
+\&   URxvt.selection\-autotransform.0: s/^([^:[:space:]]+):(\e\ed+):?$/:e \e\eQ$1\e\eE\e\ex0d:$2\e\ex0d/
+\&   URxvt.selection\-autotransform.1: s/^ at (.*?) line (\e\ed+)$/:e \e\eQ$1\e\eE\e\ex0d:$2\e\ex0d/
+.Ve
+.PP
+This is my perl configuration. The first two set the perl library
+directory and also tells urxvt to use a large number of extensions. I
+develop for myself mostly, so I actually use most of the extensions I
+write.
+.PP
+The selection stuff mainly makes the selection perl-error-message aware
+and tells it to convert pelr error mssages into vi-commands to load the
+relevant file and go tot he error line number.
+.PP
+.Vb 2
+\&   URxvt.scrollstyle:      plain
+\&   URxvt.secondaryScroll:  true
+.Ve
+.PP
+As the documentation says: plain is the preferred scrollbar for the
+author. The \f(CW\*(C`secondaryScroll\*(C'\fR confgiures urxvt to scroll in full-screen
+apps, like screen, so lines scorlled out of screen end up in urxvt's
+scrollback buffer.
+.PP
+.Vb 7
+\&   URxvt.background:       #000000
+\&   URxvt.foreground:       gray90
+\&   URxvt.color7:           gray90
+\&   URxvt.colorBD:          #ffffff
+\&   URxvt.cursorColor:      #e0e080
+\&   URxvt.throughColor:     #8080f0
+\&   URxvt.highlightColor:   #f0f0f0
+.Ve
+.PP
+Some colours. Not sure which ones are being used or even non\-defaults, but
+these are in my .Xdefaults. Most notably, they set foreground/background
+to light gray/black, and also make sure that the colour 7 matches the
+default foreground colour.
+.PP
+.Vb 1
+\&   URxvt.underlineColor:   yellow
+.Ve
+.PP
+Another colour, makes underline lines look different. Sometimes hurts, but
+is mostly a nice effect.
+.PP
+.Vb 4
+\&   URxvt.geometry:         154x36
+\&   URxvt.loginShell:       false
+\&   URxvt.meta:             ignore
+\&   URxvt.utmpInhibit:      true
+.Ve
+.PP
+Uh, well, should be mostly self\-explanatory. By specifying some defaults
+manually, I can quickly switch them for testing.
+.PP
+.Vb 1
+\&   URxvt.saveLines:        8192
+.Ve
+.PP
+A large scrollback buffer is essential. Really.
+.PP
+.Vb 1
+\&   URxvt.mapAlert:         true
+.Ve
+.PP
+The only case I use it is for my \s-1IRC\s0 window, which I like to keep
+iconified till people msg me (which beeps).
+.PP
+.Vb 1
+\&   URxvt.visualBell:       true
+.Ve
+.PP
+The audible bell is often annoying, especially when in a crowd.
+.PP
+.Vb 1
+\&   URxvt.insecure:         true
+.Ve
+.PP
+Please don't hack my mutt! Ooops...
+.PP
+.Vb 1
+\&   URxvt.pastableTabs:     false
+.Ve
+.PP
+I once thought this is a great idea.
+.PP
+.Vb 9
+\&   urxvt.font:             9x15bold,\e
+\&                           \-misc\-fixed\-bold\-r\-normal\-\-15\-140\-75\-75\-c\-90\-iso10646\-1,\e
+\&                           \-misc\-fixed\-medium\-r\-normal\-\-15\-140\-75\-75\-c\-90\-iso10646\-1, \e
+\&                           [codeset=JISX0208]xft:Kochi Gothic, \e
+\&                           xft:Bitstream Vera Sans Mono:autohint=true, \e
+\&                           xft:Code2000:antialias=false
+\&   urxvt.boldFont:         \-xos4\-terminus\-bold\-r\-normal\-\-14\-140\-72\-72\-c\-80\-iso8859\-15
+\&   urxvt.italicFont:       xft:Bitstream Vera Sans Mono:italic:autohint=true
+\&   urxvt.boldItalicFont:   xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
+.Ve
+.PP
+I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
+overwhelmed. A special note: the \f(CW\*(C`9x15bold\*(C'\fR mentioend above is actually
+the version from XFree\-3.3, as XFree\-4 replaced it by a totally different
+font (different glyphs for \f(CW\*(C`;\*(C'\fR and many other harmless characters),
+while the second font is actually the \f(CW\*(C`9x15bold\*(C'\fR from XFree4/XOrg. The
+bold version has less chars than the medium version, so I use it for rare
+characters, too. Whene ditign sources with vim, I use italic for comments
+and other stuff, which looks quite good with Bitstream Vera anti\-aliased.
+.PP
+Terminus is a quite bad font (many very wrong glyphs), but for most of my
+purposes, it works, and gives a different look, as my normal (Non\-bold)
+font is already bold, and I want to see a difference between bold and
+normal fonts.
+.PP
+Please note that I used the \f(CW\*(C`urxvt\*(C'\fR instance name and not the \f(CW\*(C`URxvt\*(C'\fR
+class name. Thats because I use different configs for different purposes,
+for example, my \s-1IRC\s0 window is started with \f(CW\*(C`\-name IRC\*(C'\fR, and uses these
+defaults:
+.PP
+.Vb 9
+\&   IRC*title:              IRC
+\&   IRC*geometry:           87x12+535+542
+\&   IRC*saveLines:          0
+\&   IRC*mapAlert:           true
+\&   IRC*font:               suxuseuro
+\&   IRC*boldFont:           suxuseuro
+\&   IRC*colorBD:            white
+\&   IRC*keysym.M\-C\-1:       command:\e033]710;suxuseuro\e007\e033]711;suxuseuro\e007
+\&   IRC*keysym.M\-C\-2:       command:\e033]710;9x15bold\e007\e033]711;9x15bold\e007
+.Ve
+.PP
+\&\f(CW\*(C`Alt\-Shift\-1\*(C'\fR and \f(CW\*(C`Alt\-Shift\-2\*(C'\fR switch between two different font
+sizes. \f(CW\*(C`suxuseuro\*(C'\fR allows me to keep an eye (and actually read)
+stuff while keeping a very small window. If somebody pastes something
+complicated (e.g. japanese), I temporarily switch to a larger font.
+.PP
+The above is all in my \f(CW\*(C`.Xdefaults\*(C'\fR (I don't use \f(CW\*(C`.Xresources\*(C'\fR nor
+\&\f(CW\*(C`xrdb\*(C'\fR). I also have some resources in a separate \f(CW\*(C`.Xdefaults\-hostname\*(C'\fR
+file for different hosts, for example, on ym main desktop, I use:
+.PP
+.Vb 5
+\&   URxvt.keysym.C\-M\-q: command:\e033[3;5;5t
+\&   URxvt.keysym.C\-M\-y: command:\e033[3;5;606t
+\&   URxvt.keysym.C\-M\-e: command:\e033[3;1605;5t
+\&   URxvt.keysym.C\-M\-c: command:\e033[3;1605;606t
+\&   URxvt.keysym.C\-M\-p: perl:test
+.Ve
+.PP
+The first for keysym definitions allow me to quickly bring some windows
+in the layout I like most. Ion users might start laughing but will stop
+immediately when I tell them that I use my own Fvwm2 module for much the
+same effect as Ion provides, and I only very rarely use the above key
+combinations :\->
+.PP
+\fIWhy doesn't rxvt-unicode read my resources?\fR
+.IX Subsection "Why doesn't rxvt-unicode read my resources?"
+.PP
+Well, why, indeed? It does, in a way very similar to other X
+applications. Most importantly, this means that if you or your \s-1OS\s0 loads
+resources into the X display (the right way to do it), rxvt-unicode will
+ignore any resource files in your home directory. It will only read
+\&\fI\f(CI$HOME\fI/.Xdefaults\fR when no resources are attached to the display.
+.PP
+If you have or use an \fI\f(CI$HOME\fI/.Xresources\fR file, chances are that
+resources are loaded into your X\-server. In this case, you have to
+re-login after every change (or run \fIxrdb \-merge \f(CI$HOME\fI/.Xresources\fR).
+.PP
+Also consider the form resources have to use:
+.PP
+.Vb 1
+\&  URxvt.resource: value
+.Ve
+.PP
+If you want to use another form (there are lots of different ways of
+specifying resources), make sure you understand wether and why it
+works. If unsure, use the form above.
+.PP
-.IP "When I log-in to another system it tells me about missing terminfo data?" 4
+\fIWhen I log-in to another system it tells me about missing terminfo data?\fR
-.IX Item "When I log-in to another system it tells me about missing terminfo data?"
+.IX Subsection "When I log-in to another system it tells me about missing terminfo data?"
+.PP
 The terminal description used by rxvt-unicode is not as widely available
 as that for xterm, or even rxvt (for which the same problem often arises).
-.Sp
+.PP
 The correct solution for this problem is to install the terminfo, this can
 be done like this (with ncurses' infocmp):
-.Sp
+.PP
 .Vb 2
 \&   REMOTE=remotesystem.domain
-\&   infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
+\&   infocmp rxvt\-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
 .Ve
-.Sp
+.PP
 \&... or by installing rxvt-unicode normally on the remote system,
-.Sp
+.PP
 If you cannot or do not want to do this, then you can simply set
 \&\f(CW\*(C`TERM=rxvt\*(C'\fR or even \f(CW\*(C`TERM=xterm\*(C'\fR, and live with the small number of
 problems arising, which includes wrong keymapping, less and different
 colours and some refresh errors in fullscreen applications. It's a nice
 quick-and-dirty workaround for rare cases, though.
-.Sp
+.PP
 If you always want to do this (and are fine with the consequences) you
 can either recompile rxvt-unicode with the desired \s-1TERM\s0 value or use a
 resource to set it:
-.Sp
+.PP
 .Vb 1
 \&   URxvt.termName: rxvt
 .Ve
-.Sp
+.PP
 If you don't plan to use \fBrxvt\fR (quite common...) you could also replace
-the rxvt terminfo file with the rxvt-unicode one.
+the rxvt terminfo file with the rxvt-unicode one and use \f(CW\*(C`TERM=rxvt\*(C'\fR.
-.ie n .IP """tic"" outputs some error when compiling the terminfo entry." 4
+.PP
-.el .IP "\f(CWtic\fR outputs some error when compiling the terminfo entry." 4
+\fI\f(CI\*(C`tic\*(C'\fI outputs some error when compiling the terminfo entry.\fR
-.IX Item "tic outputs some error when compiling the terminfo entry."
+.IX Subsection "tic outputs some error when compiling the terminfo entry."
+.PP
 Most likely it's the empty definition for \f(CW\*(C`enacs=\*(C'\fR. Just replace it by
 \&\f(CW\*(C`enacs=\eE[0@\*(C'\fR and try again.
-.ie n .IP """bash""'s readline does not work correctly under @@RXVT_NAME@@." 4
+.PP
-.el .IP "\f(CWbash\fR's readline does not work correctly under @@RXVT_NAME@@." 4
+\fI\f(CI\*(C`bash\*(C'\fI's readline does not work correctly under @@URXVT_NAME@@.\fR
-.IX Item "bash's readline does not work correctly under @@RXVT_NAME@@."
+.IX Subsection "bash's readline does not work correctly under @@URXVT_NAME@@."
-.PD 0
+.PP
+See next entry.
+.PP
-.IP "I need a termcap file entry." 4
+\fII need a termcap file entry.\fR
-.IX Item "I need a termcap file entry."
+.IX Subsection "I need a termcap file entry."
-.PD
+.PP
 One reason you might want this is that some distributions or operating
 systems still compile some programs using the long-obsoleted termcap
 library (Fedora Core's bash is one example) and rely on a termcap entry
 for \f(CW\*(C`rxvt\-unicode\*(C'\fR.
-.Sp
+.PP
 You could use rxvt's termcap entry with resonable results in many cases.
 You can also create a termcap entry by using terminfo's infocmp program
 like this:
-.Sp
+.PP
 .Vb 1
-\&   infocmp -C rxvt-unicode
+\&   infocmp \-C rxvt\-unicode
 .Ve
-.Sp
+.PP
 Or you could use this termcap entry, generated by the command above:
-.Sp
+.PP
-.Vb 20
+.Vb 10
-\&   rxvt-unicode|rxvt-unicode terminal (X Window System):\e
+\&   rxvt\-unicode|rxvt\-unicode terminal (X Window System):\e
 \&           :am:bw:eo:km:mi:ms:xn:xo:\e
 \&           :co#80:it#8:li#24:lm#0:\e
 \&           :AL=\eE[%dL:DC=\eE[%dP:DL=\eE[%dM:DO=\eE[%dB:IC=\eE[%d@:\e
 \&           :K1=\eEOw:K2=\eEOu:K3=\eEOy:K4=\eEOq:K5=\eEOs:LE=\eE[%dD:\e
 \&           :RI=\eE[%dC:SF=\eE[%dS:SR=\eE[%dT:UP=\eE[%dA:ae=\eE(B:al=\eE[L:\e
 \&           :sc=\eE7:se=\eE[27m:sf=^J:so=\eE[7m:sr=\eEM:st=\eEH:ta=^I:\e
 \&           :te=\eE[r\eE[?1049l:ti=\eE[?1049h:ue=\eE[24m:up=\eE[A:\e
 \&           :us=\eE[4m:vb=\eE[?5h\eE[?5l:ve=\eE[?25h:vi=\eE[?25l:\e
 \&           :vs=\eE[?25h:
 .Ve
-.ie n .IP "Why does ""ls"" no longer have coloured output?" 4
+.PP
-.el .IP "Why does \f(CWls\fR no longer have coloured output?" 4
+\fIWhy does \f(CI\*(C`ls\*(C'\fI no longer have coloured output?\fR
-.IX Item "Why does ls no longer have coloured output?"
+.IX Subsection "Why does ls no longer have coloured output?"
+.PP
 The \f(CW\*(C`ls\*(C'\fR in the \s-1GNU\s0 coreutils unfortunately doesn't use terminfo to
-decide wether a terminal has colour, but uses it's own configuration
+decide wether a terminal has colour, but uses its own configuration
-file. Needless to say, \f(CW\*(C`rxvt\-unicode\*(C'\fR is not in it's default file (among
+file. Needless to say, \f(CW\*(C`rxvt\-unicode\*(C'\fR is not in its default file (among
 with most other terminals supporting colour). Either add:
-.Sp
+.PP
 .Vb 1
-\&   TERM rxvt-unicode
+\&   TERM rxvt\-unicode
 .Ve
-.Sp
+.PP
 to \f(CW\*(C`/etc/DIR_COLORS\*(C'\fR or simply add:
-.Sp
+.PP
 .Vb 1
-\&   alias ls='ls --color=auto'
+\&   alias ls='ls \-\-color=auto'
 .Ve
-.Sp
+.PP
 to your \f(CW\*(C`.profile\*(C'\fR or \f(CW\*(C`.bashrc\*(C'\fR.
+.PP
-.IP "Why doesn't vim/emacs etc. use the 88 colour mode?" 4
+\fIWhy doesn't vim/emacs etc. use the 88 colour mode?\fR
-.IX Item "Why doesn't vim/emacs etc. use the 88 colour mode?"
+.IX Subsection "Why doesn't vim/emacs etc. use the 88 colour mode?"
-.PD 0
+.PP
+See next entry.
+.PP
-.IP "Why doesn't vim/emacs etc. make use of italic?" 4
+\fIWhy doesn't vim/emacs etc. make use of italic?\fR
-.IX Item "Why doesn't vim/emacs etc. make use of italic?"
+.IX Subsection "Why doesn't vim/emacs etc. make use of italic?"
+.PP
+See next entry.
+.PP
-.IP "Why are the secondary screen-related options not working properly?" 4
+\fIWhy are the secondary screen-related options not working properly?\fR
-.IX Item "Why are the secondary screen-related options not working properly?"
+.IX Subsection "Why are the secondary screen-related options not working properly?"
-.PD
+.PP
 Make sure you are using \f(CW\*(C`TERM=rxvt\-unicode\*(C'\fR. Some pre-packaged
 distributions (most notably Debian GNU/Linux) break rxvt-unicode
 by setting \f(CW\*(C`TERM\*(C'\fR to \f(CW\*(C`rxvt\*(C'\fR, which doesn't have these extra
 features. Unfortunately, some of these (most notably, again, Debian
 GNU/Linux) furthermore fail to even install the \f(CW\*(C`rxvt\-unicode\*(C'\fR terminfo
 file, so you will need to install it on your own (See the question \fBWhen
 I log-in to another system it tells me about missing terminfo data?\fR on
 how to do this).
-.IP "My numerical keypad acts weird and generates differing output?" 4
+.Sh "Encoding / Locale / Input Method Issues"
-.IX Item "My numerical keypad acts weird and generates differing output?"
+.IX Subsection "Encoding / Locale / Input Method Issues"
-Some Debian GNUL/Linux users seem to have this problem, although no
-specific details were reported so far. It is possible that this is caused
-by the wrong \f(CW\*(C`TERM\*(C'\fR setting, although the details of wether and how
-this can happen are unknown, as \f(CW\*(C`TERM=rxvt\*(C'\fR should offer a compatible
-keymap. See the answer to the previous question, and please report if that
-helped.
-.IP "Rxvt-unicode does not seem to understand the selected encoding?" 4
+\fIRxvt-unicode does not seem to understand the selected encoding?\fR
-.IX Item "Rxvt-unicode does not seem to understand the selected encoding?"
+.IX Subsection "Rxvt-unicode does not seem to understand the selected encoding?"
-.PD 0
+.PP
+See next entry.
+.PP
-.IP "Unicode does not seem to work?" 4
+\fIUnicode does not seem to work?\fR
-.IX Item "Unicode does not seem to work?"
+.IX Subsection "Unicode does not seem to work?"
-.PD
+.PP
 If you encounter strange problems like typing an accented character but
 getting two unrelated other characters or similar, or if program output is
 subtly garbled, then you should check your locale settings.
-.Sp
+.PP
 Rxvt-unicode must be started with the same \f(CW\*(C`LC_CTYPE\*(C'\fR setting as the
 programs. Often rxvt-unicode is started in the \f(CW\*(C`C\*(C'\fR locale, while the
 login script running within the rxvt-unicode window changes the locale to
 something else, e.g. \f(CW\*(C`en_GB.UTF\-8\*(C'\fR. Needless to say, this is not going to work.
-.Sp
+.PP
 The best thing is to fix your startup environment, as you will likely run
 into other problems. If nothing works you can try this in your .profile.
-.Sp
+.PP
 .Vb 1
-\&  printf '\ee]701;%s\e007' "$LC_CTYPE"
+\&  printf '\e33]701;%s\e007' "$LC_CTYPE"
 .Ve
-.Sp
+.PP
 If this doesn't work, then maybe you use a \f(CW\*(C`LC_CTYPE\*(C'\fR specification not
 supported on your systems. Some systems have a \f(CW\*(C`locale\*(C'\fR command which
 displays this (also, \f(CW\*(C`perl \-e0\*(C'\fR can be used to check locale settings, as
 it will complain loudly if it cannot set the locale). If it displays something
 like:
-.Sp
+.PP
 .Vb 1
 \&  locale: Cannot set LC_CTYPE to default locale: ...
 .Ve
-.Sp
+.PP
 Then the locale you specified is not supported on your system.
-.Sp
+.PP
 If nothing works and you are sure that everything is set correctly then
 you will need to remember a little known fact: Some programs just don't
 support locales :(
-.IP "Why do some characters look so much different than others?" 4
+.PP
-.IX Item "Why do some characters look so much different than others?"
+\fIHow does rxvt-unicode determine the encoding to use?\fR
+.IX Subsection "How does rxvt-unicode determine the encoding to use?"
+.PP
+See next entry.
+.PP
+\fIIs there an option to switch encodings?\fR
+.IX Subsection "Is there an option to switch encodings?"
+.PP
+Unlike some other terminals, rxvt-unicode has no encoding switch, and no
+specific \*(L"utf\-8\*(R" mode, such as xterm. In fact, it doesn't even know about
+\&\s-1UTF\-8\s0 or any other encodings with respect to terminal I/O.
+.PP
+The reasons is that there exists a perfectly fine mechanism for selecting
+the encoding, doing I/O and (most important) communicating this to all
+applications so everybody agrees on character properties such as width
+and code number. This mechanism is the \fIlocale\fR. Applications not using
+that info will have problems (for example, \f(CW\*(C`xterm\*(C'\fR gets the width of
+characters wrong as it uses its own, locale-independent table under all
+locales).
+.PP
+Rxvt-unicode uses the \f(CW\*(C`LC_CTYPE\*(C'\fR locale category to select encoding. All
+programs doing the same (that is, most) will automatically agree in the
+interpretation of characters.
+.PP
+Unfortunately, there is no system-independent way to select locales, nor
+is there a standard on how locale specifiers will look like.
+.PP
+On most systems, the content of the \f(CW\*(C`LC_CTYPE\*(C'\fR environment variable
+contains an arbitrary string which corresponds to an already-installed
+locale. Common names for locales are \f(CW\*(C`en_US.UTF\-8\*(C'\fR, \f(CW\*(C`de_DE.ISO\-8859\-15\*(C'\fR,
+\&\f(CW\*(C`ja_JP.EUC\-JP\*(C'\fR, i.e. \f(CW\*(C`language_country.encoding\*(C'\fR, but other forms
+(i.e. \f(CW\*(C`de\*(C'\fR or \f(CW\*(C`german\*(C'\fR) are also common.
+.PP
+Rxvt-unicode ignores all other locale categories, and except for
+the encoding, ignores country or language-specific settings,
+i.e. \f(CW\*(C`de_DE.UTF\-8\*(C'\fR and \f(CW\*(C`ja_JP.UTF\-8\*(C'\fR are the normally same to
+rxvt\-unicode.
+.PP
+If you want to use a specific encoding you have to make sure you start
+rxvt-unicode with the correct \f(CW\*(C`LC_CTYPE\*(C'\fR category.
+.PP
+\fICan I switch locales at runtime?\fR
+.IX Subsection "Can I switch locales at runtime?"
+.PP
+Yes, using an escape sequence. Try something like this, which sets
+rxvt\-unicode's idea of \f(CW\*(C`LC_CTYPE\*(C'\fR.
+.PP
+.Vb 1
+\&  printf '\e33]701;%s\e007' ja_JP.SJIS
+.Ve
+.PP
+See also the previous answer.
+.PP
+Sometimes this capability is rather handy when you want to work in
+one locale (e.g. \f(CW\*(C`de_DE.UTF\-8\*(C'\fR) but some programs don't support it
+(e.g. \s-1UTF\-8\s0). For example, I use this script to start \f(CW\*(C`xjdic\*(C'\fR, which
+first switches to a locale supported by xjdic and back later:
+.PP
+.Vb 3
+\&   printf '\e33]701;%s\e007' ja_JP.SJIS
+\&   xjdic \-js
+\&   printf '\e33]701;%s\e007' de_DE.UTF\-8
+.Ve
+.PP
+You can also use xterm's \f(CW\*(C`luit\*(C'\fR program, which usually works fine, except
+for some locales where character width differs between program\- and
+rxvt\-unicode\-locales.
+.PP
+\fII have problems getting my input method working.\fR
+.IX Subsection "I have problems getting my input method working."
+.PP
+Try a search engine, as this is slightly different for every input method server.
+.PP
+Here is a checklist:
+.IP "\- Make sure your locale \fIand\fR the imLocale are supported on your \s-1OS\s0." 4
+.IX Item "- Make sure your locale and the imLocale are supported on your OS."
+Try \f(CW\*(C`locale \-a\*(C'\fR or check the documentation for your \s-1OS\s0.
+.IP "\- Make sure your locale or imLocale matches a locale supported by your \s-1XIM\s0." 4
+.IX Item "- Make sure your locale or imLocale matches a locale supported by your XIM."
+For example, \fBkinput2\fR does not support \s-1UTF\-8\s0 locales, you should use
+\&\f(CW\*(C`ja_JP.EUC\-JP\*(C'\fR or equivalent.
+.IP "\- Make sure your \s-1XIM\s0 server is actually running." 4
+.IX Item "- Make sure your XIM server is actually running."
 .PD 0
-.IP "How does rxvt-unicode choose fonts?" 4
+.ie n .IP "\- Make sure the ""XMODIFIERS""\fR environment variable is set correctly when \fIstarting rxvt\-unicode." 4
-.IX Item "How does rxvt-unicode choose fonts?"
+.el .IP "\- Make sure the \f(CWXMODIFIERS\fR environment variable is set correctly when \fIstarting\fR rxvt\-unicode." 4
+.IX Item "- Make sure the XMODIFIERS environment variable is set correctly when starting rxvt-unicode."
 .PD
-Most fonts do not contain the full range of Unicode, which is
+When you want to use e.g. \fBkinput2\fR, it must be set to
-fine. Chances are that the font you (or the admin/package maintainer of
+\&\f(CW\*(C`@im=kinput2\*(C'\fR. For \fBscim\fR, use \f(CW\*(C`@im=SCIM\*(C'\fR. Youc an see what input
-your system/os) have specified does not cover all the characters you want
+method servers are running with this command:
-to display.
-.Sp
-\&\fBrxvt-unicode\fR makes a best-effort try at finding a replacement
-font. Often the result is fine, but sometimes the chosen font looks
-bad/ugly/wrong. Some fonts have totally strange characters that don't
-resemble the correct glyph at all, and rxvt-unicode lacks the artificial
-intelligence to detect that a specific glyph is wrong: it has to believe
-the font that the characters it claims to contain indeed look correct.
-.Sp
-In that case, select a font of your taste and add it to the font list,
-e.g.:
 .Sp
 .Vb 1
-\&   @@RXVT_NAME@@ -fn basefont,font2,font3...
+\&   xprop \-root XIM_SERVERS
 .Ve
-.Sp
+.IP "" 4
-When rxvt-unicode sees a character, it will first look at the base
+.PP
-font. If the base font does not contain the character, it will go to the
+\fIMy input method wants <some encoding> but I want \s-1UTF\-8\s0, what can I do?\fR
-next font, and so on. Specifying your own fonts will also speed up this
+.IX Subsection "My input method wants <some encoding> but I want UTF-8, what can I do?"
-search and use less resources within rxvt-unicode and the X\-server.
+.PP
-.Sp
+You can specify separate locales for the input method and the rest of the
-The only limitation is that none of the fonts may be larger than the base
+terminal, using the resource \f(CW\*(C`imlocale\*(C'\fR:
-font, as the base font defines the terminal character cell size, which
+.PP
-must be the same due to the way terminals work.
+.Vb 1
-.IP "Why do some chinese characters look so different than others?" 4
+\&   URxvt.imlocale: ja_JP.EUC\-JP
-.IX Item "Why do some chinese characters look so different than others?"
+.Ve
-This is because there is a difference between script and language \*(--
+.PP
-rxvt-unicode does not know which language the text that is output is,
+Now you can start your terminal with \f(CW\*(C`LC_CTYPE=ja_JP.UTF\-8\*(C'\fR and still
-as it only knows the unicode character codes. If rxvt-unicode first
+use your input method. Please note, however, that, depending on your Xlib
-sees a japanese/chinese character, it might choose a japanese font for
+version, you may not be able to input characters outside \f(CW\*(C`EUC\-JP\*(C'\fR in a
-display. Subsequent japanese characters will use that font. Now, many
+normal way then, as your input method limits you.
-chinese characters aren't represented in japanese fonts, so when the first
+.PP
-non-japanese character comes up, rxvt-unicode will look for a chinese font
+\fIRxvt-unicode crashes when the X Input Method changes or exits.\fR
-\&\*(-- unfortunately at this point, it will still use the japanese font for
+.IX Subsection "Rxvt-unicode crashes when the X Input Method changes or exits."
-chinese characters that are also in the japanese font.
+.PP
-.Sp
+Unfortunately, this is unavoidable, as the \s-1XIM\s0 protocol is racy by
-The workaround is easy: just tag a chinese font at the end of your font
+design. Applications can avoid some crashes at the expense of memory
-list (see the previous question). The key is to view the font list as
+leaks, and Input Methods can avoid some crashes by careful ordering at
-a preference list: If you expect more japanese, list a japanese font
+exit time. \fBkinput2\fR (and derived input methods) generally succeeds,
-first. If you expect more chinese, put a chinese font first.
+while \fB\s-1SCIM\s0\fR (or similar input methods) fails. In the end, however,
-.Sp
+crashes cannot be completely avoided even if both sides cooperate.
-In the future it might be possible to switch language preferences at
+.PP
-runtime (the internal data structure has no problem with using different
+So the only workaround is not to kill your Input Method Servers.
-fonts for the same character at the same time, but no interface for this
+.Sh "Operating Systems / Package Maintaining"
-has been designed yet).
+.IX Subsection "Operating Systems / Package Maintaining"
-.Sp
+\fII am using Debian GNU/Linux and have a problem...\fR
-Until then, you might get away with switching fonts at runtime (see \*(L"Can I switch the fonts at runtime?\*(R" later in this document).
+.IX Subsection "I am using Debian GNU/Linux and have a problem..."
-.IP "Why does rxvt-unicode sometimes leave pixel droppings?" 4
+.PP
-.IX Item "Why does rxvt-unicode sometimes leave pixel droppings?"
+The Debian GNU/Linux package of rxvt-unicode in sarge contains large
-Most fonts were not designed for terminal use, which means that character
+patches that considerably change the behaviour of rxvt-unicode (but
-size varies a lot. A font that is otherwise fine for terminal use might
+unfortunately this notice has been removed). Before reporting a bug to
-contain some characters that are simply too wide. Rxvt-unicode will avoid
+the original rxvt-unicode author please download and install the genuine
-these characters. For characters that are just \*(L"a bit\*(R" too wide a special
+version (<http://software.schmorp.de#rxvt\-unicode>) and try to reproduce
-\&\*(L"careful\*(R" rendering mode is used that redraws adjacent characters.
+the problem. If you cannot, chances are that the problems are specific to
-.Sp
+Debian GNU/Linux, in which case it should be reported via the Debian Bug
-All of this requires that fonts do not lie about character sizes,
+Tracking System (use \f(CW\*(C`reportbug\*(C'\fR to report the bug).
-however: Xft fonts often draw glyphs larger than their acclaimed bounding
+.PP
-box, and rxvt-unicode has no way of detecting this (the correct way is to
+For other problems that also affect the Debian package, you can and
-ask for the character bounding box, which unfortunately is wrong in these
+probably should use the Debian \s-1BTS\s0, too, because, after all, it's also a
-cases).
+bug in the Debian version and it serves as a reminder for other users that
-.Sp
+might encounter the same issue.
-It's not clear (to me at least), wether this is a bug in Xft, freetype,
+.PP
-or the respective font. If you encounter this problem you might try using
+\fII am maintaining rxvt-unicode for distribution/OS \s-1XXX\s0, any recommendation?\fR
-the \f(CW\*(C`\-lsp\*(C'\fR option to give the font more height. If that doesn't work, you
+.IX Subsection "I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?"
-might be forced to use a different font.
+.PP
-.Sp
+You should build one binary with the default options. \fIconfigure\fR
-All of this is not a problem when using X11 core fonts, as their bounding
+now enables most useful options, and the trend goes to making them
-box data is correct.
+runtime\-switchable, too, so there is usually no drawback to enbaling them,
+except higher disk and possibly memory usage. The perl interpreter should
+be enabled, as important functionality (menus, selection, likely more in
+the future) depends on it.
+.PP
+You should not overwrite the \f(CW\*(C`perl\-ext\-common\*(C'\fR snd \f(CW\*(C`perl\-ext\*(C'\fR resources
+system-wide (except maybe with \f(CW\*(C`defaults\*(C'\fR). This will result in useful
+behaviour. If your distribution aims at low memory, add an empty
+\&\f(CW\*(C`perl\-ext\-common\*(C'\fR resource to the app-defaults file. This will keep the
+perl interpreter disabled until the user enables it.
+.PP
+If you can/want build more binaries, I recommend building a minimal
+one with \f(CW\*(C`\-\-disable\-everything\*(C'\fR (very useful) and a maximal one with
+\&\f(CW\*(C`\-\-enable\-everything\*(C'\fR (less useful, it will be very big due to a lot of
+encodings built-in that increase download times and are rarely used).
+.PP
+\fII need to make it setuid/setgid to support utmp/ptys on my \s-1OS\s0, is this safe?\fR
+.IX Subsection "I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?"
+.PP
+It should be, starting with release 7.1. You are encouraged to properly
+install urxvt with privileges necessary for your \s-1OS\s0 now.
+.PP
+When rxvt-unicode detects that it runs setuid or setgid, it will fork
+into a helper process for privileged operations (pty handling on some
+systems, utmp/wtmp/lastlog handling on others) and drop privileges
+immediately. This is much safer than most other terminals that keep
+privileges while running (but is more relevant to urxvt, as it contains
+things as perl interpreters, which might be \*(L"helpful\*(R" to attackers).
+.PP
+This forking is done as the very first within \fImain()\fR, which is very early
+and reduces possible bugs to initialisation code run before \fImain()\fR, or
+things like the dynamic loader of your system, which should result in very
+little risk.
+.PP
-.IP "On Solaris 9, many line-drawing characters are too wide." 4
+\fIOn Solaris 9, many line-drawing characters are too wide.\fR
-.IX Item "On Solaris 9, many line-drawing characters are too wide."
+.IX Subsection "On Solaris 9, many line-drawing characters are too wide."
+.PP
 Seems to be a known bug, read
 <http://nixdoc.net/files/forum/about34198.html>. Some people use the
 following ugly workaround to get non-double-wide-characters working:
-.Sp
+.PP
 .Vb 1
 \&   #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
 .Ve
-.IP "My Compose (Multi_key) key is no longer working." 4
+.PP
-.IX Item "My Compose (Multi_key) key is no longer working."
-The most common causes for this are that either your locale is not set
-correctly, or you specified a \fBpreeditStyle\fR that is not supported by
-your input method. For example, if you specified \fBOverTheSpot\fR and
-your input method (e.g. the default input method handling Compose keys)
-does not support this (for instance because it is not visual), then
-rxvt-unicode will continue without an input method.
-.Sp
-In this case either do not specify a \fBpreeditStyle\fR or specify more than
-one pre-edit style, such as \fBOverTheSpot,Root,None\fR.
-.ie n .IP "I cannot type ""Ctrl\-Shift\-2"" to get an \s-1ASCII\s0 \s-1NUL\s0 character due to \s-1ISO\s0 14755" 4
-.el .IP "I cannot type \f(CWCtrl\-Shift\-2\fR to get an \s-1ASCII\s0 \s-1NUL\s0 character due to \s-1ISO\s0 14755" 4
-.IX Item "I cannot type Ctrl-Shift-2 to get an ASCII NUL character due to ISO 14755"
-Either try \f(CW\*(C`Ctrl\-2\*(C'\fR alone (it often is mapped to \s-1ASCII\s0 \s-1NUL\s0 even on
-international keyboards) or simply use \s-1ISO\s0 14755 support to your
-advantage, typing <Ctrl\-Shift\-0> to get a \s-1ASCII\s0 \s-1NUL\s0. This works for other
-codes, too, such as \f(CW\*(C`Ctrl\-Shift\-1\-d\*(C'\fR to type the default telnet escape
-character and so on.
-.IP "How can I keep rxvt-unicode from using reverse video so much?" 4
-.IX Item "How can I keep rxvt-unicode from using reverse video so much?"
-First of all, make sure you are running with the right terminal settings
-(\f(CW\*(C`TERM=rxvt\-unicode\*(C'\fR), which will get rid of most of these effects. Then
-make sure you have specified colours for italic and bold, as otherwise
-rxvt-unicode might use reverse video to simulate the effect:
-.Sp
-.Vb 2
-\&   URxvt.colorBD:  white
-\&   URxvt.colorIT:  green
-.Ve
-.IP "Some programs assume totally weird colours (red instead of blue), how can I fix that?" 4
-.IX Item "Some programs assume totally weird colours (red instead of blue), how can I fix that?"
-For some unexplainable reason, some rare programs assume a very weird
-colour palette when confronted with a terminal with more than the standard
-8 colours (rxvt\-unicode supports 88). The right fix is, of course, to fix
-these programs not to assume non-ISO colours without very good reasons.
-.Sp
-In the meantime, you can either edit your \f(CW\*(C`rxvt\-unicode\*(C'\fR terminfo
-definition to only claim 8 colour support or use \f(CW\*(C`TERM=rxvt\*(C'\fR, which will
-fix colours but keep you from using other rxvt-unicode features.
-.IP "I am on FreeBSD and rxvt-unicode does not seem to work at all." 4
+\fII am on FreeBSD and rxvt-unicode does not seem to work at all.\fR
-.IX Item "I am on FreeBSD and rxvt-unicode does not seem to work at all."
+.IX Subsection "I am on FreeBSD and rxvt-unicode does not seem to work at all."
+.PP
 Rxvt-unicode requires the symbol \f(CW\*(C`_\|_STDC_ISO_10646_\|_\*(C'\fR to be defined
 in your compile environment, or an implementation that implements it,
 wether it defines the symbol or not. \f(CW\*(C`_\|_STDC_ISO_10646_\|_\*(C'\fR requires that
 \&\fBwchar_t\fR is represented as unicode.
-.Sp
+.PP
 As you might have guessed, FreeBSD does neither define this symobl nor
-does it support it. Instead, it uses it's own internal representation of
+does it support it. Instead, it uses its own internal representation of
 \&\fBwchar_t\fR. This is, of course, completely fine with respect to standards.
-.Sp
+.PP
 However, that means rxvt-unicode only works in \f(CW\*(C`POSIX\*(C'\fR, \f(CW\*(C`ISO\-8859\-1\*(C'\fR and
 \&\f(CW\*(C`UTF\-8\*(C'\fR locales under FreeBSD (which all use Unicode as \fBwchar_t\fR.
-.Sp
+.PP
 \&\f(CW\*(C`_\|_STDC_ISO_10646_\|_\*(C'\fR is the only sane way to support multi-language
 apps in an \s-1OS\s0, as using a locale-dependent (and non\-standardized)
 representation of \fBwchar_t\fR makes it impossible to convert between
 \&\fBwchar_t\fR (as used by X11 and your applications) and any other encoding
 without implementing OS-specific-wrappers for each and every locale. There
 simply are no APIs to convert \fBwchar_t\fR into anything except the current
 locale encoding.
-.Sp
+.PP
 Some applications (such as the formidable \fBmlterm\fR) work around this
 by carrying their own replacement functions for character set handling
 with them, and either implementing OS-dependent hacks or doing multiple
 conversions (which is slow and unreliable in case the \s-1OS\s0 implements
 encodings slightly different than the terminal emulator).
-.Sp
+.PP
 The rxvt-unicode author insists that the right way to fix this is in the
 system libraries once and for all, instead of forcing every app to carry
 complete replacements for them :)
+.PP
-.IP "I use Solaris 9 and it doesn't compile/work/etc." 4
+\fII use Solaris 9 and it doesn't compile/work/etc.\fR
-.IX Item "I use Solaris 9 and it doesn't compile/work/etc."
+.IX Subsection "I use Solaris 9 and it doesn't compile/work/etc."
+.PP
 Try the diff in \fIdoc/solaris9.patch\fR as a base. It fixes the worst
 problems with \f(CW\*(C`wcwidth\*(C'\fR and a compile problem.
+.PP
-.IP "How can I use rxvt-unicode under cygwin?" 4
+\fIHow can I use rxvt-unicode under cygwin?\fR
-.IX Item "How can I use rxvt-unicode under cygwin?"
+.IX Subsection "How can I use rxvt-unicode under cygwin?"
+.PP
 rxvt-unicode should compile and run out of the box on cygwin, using
 the X11 libraries that come with cygwin. libW11 emulation is no
 longer supported (and makes no sense, either, as it only supported a
 single font). I recommend starting the X\-server in \f(CW\*(C`\-multiwindow\*(C'\fR or
 \&\f(CW\*(C`\-rootless\*(C'\fR mode instead, which will result in similar look&feel as the
 old libW11 emulation.
-.Sp
+.PP
 At the time of this writing, cygwin didn't seem to support any multi-byte
 encodings (you might try \f(CW\*(C`LC_CTYPE=C\-UTF\-8\*(C'\fR), so you are likely limited
 to 8\-bit encodings.
-.IP "How does rxvt-unicode determine the encoding to use?" 4
-.IX Item "How does rxvt-unicode determine the encoding to use?"
-.PD 0
-.IP "Is there an option to switch encodings?" 4
-.IX Item "Is there an option to switch encodings?"
-.PD
-Unlike some other terminals, rxvt-unicode has no encoding switch, and no
-specific \*(L"utf\-8\*(R" mode, such as xterm. In fact, it doesn't even know about
-\&\s-1UTF\-8\s0 or any other encodings with respect to terminal I/O.
-.Sp
-The reasons is that there exists a perfectly fine mechanism for selecting
-the encoding, doing I/O and (most important) communicating this to all
-applications so everybody agrees on character properties such as width
-and code number. This mechanism is the \fIlocale\fR. Applications not using
-that info will have problems (for example, \f(CW\*(C`xterm\*(C'\fR gets the width of
-characters wrong as it uses it's own, locale-independent table under all
-locales).
-.Sp
-Rxvt-unicode uses the \f(CW\*(C`LC_CTYPE\*(C'\fR locale category to select encoding. All
-programs doing the same (that is, most) will automatically agree in the
-interpretation of characters.
-.Sp
-Unfortunately, there is no system-independent way to select locales, nor
-is there a standard on how locale specifiers will look like.
-.Sp
-On most systems, the content of the \f(CW\*(C`LC_CTYPE\*(C'\fR environment variable
-contains an arbitrary string which corresponds to an already-installed
-locale. Common names for locales are \f(CW\*(C`en_US.UTF\-8\*(C'\fR, \f(CW\*(C`de_DE.ISO\-8859\-15\*(C'\fR,
-\&\f(CW\*(C`ja_JP.EUC\-JP\*(C'\fR, i.e. \f(CW\*(C`language_country.encoding\*(C'\fR, but other forms
-(i.e. \f(CW\*(C`de\*(C'\fR or \f(CW\*(C`german\*(C'\fR) are also common.
-.Sp
-Rxvt-unicode ignores all other locale categories, and except for
-the encoding, ignores country or language-specific settings,
-i.e. \f(CW\*(C`de_DE.UTF\-8\*(C'\fR and \f(CW\*(C`ja_JP.UTF\-8\*(C'\fR are the normally same to
-rxvt\-unicode.
-.Sp
-If you want to use a specific encoding you have to make sure you start
-rxvt-unicode with the correct \f(CW\*(C`LC_CTYPE\*(C'\fR category.
-.IP "Can I switch locales at runtime?" 4
-.IX Item "Can I switch locales at runtime?"
-Yes, using an escape sequence. Try something like this, which sets
-rxvt\-unicode's idea of \f(CW\*(C`LC_CTYPE\*(C'\fR.
-.Sp
-.Vb 1
-\&  printf '\ee]701;%s\e007' ja_JP.SJIS
-.Ve
-.Sp
-See also the previous answer.
-.Sp
-Sometimes this capability is rather handy when you want to work in
-one locale (e.g. \f(CW\*(C`de_DE.UTF\-8\*(C'\fR) but some programs don't support it
-(e.g. \s-1UTF\-8\s0). For example, I use this script to start \f(CW\*(C`xjdic\*(C'\fR, which
-first switches to a locale supported by xjdic and back later:
-.Sp
-.Vb 3
-\&   printf '\ee]701;%s\e007' ja_JP.SJIS
-\&   xjdic -js
-\&   printf '\ee]701;%s\e007' de_DE.UTF-8
-.Ve
-.Sp
-You can also use xterm's \f(CW\*(C`luit\*(C'\fR program, which usually works fine, except
-for some locales where character width differs between program\- and
-rxvt\-unicode\-locales.
-.IP "Can I switch the fonts at runtime?" 4
-.IX Item "Can I switch the fonts at runtime?"
-Yes, using an escape sequence. Try something like this, which has the same
-effect as using the \f(CW\*(C`\-fn\*(C'\fR switch, and takes effect immediately:
-.Sp
-.Vb 1
-\&   printf '\ee]50;%s\e007' "9x15bold,xft:Kochi Gothic"
-.Ve
-.Sp
-This is useful if you e.g. work primarily with japanese (and prefer a
-japanese font), but you have to switch to chinese temporarily, where
-japanese fonts would only be in your way.
-.Sp
-You can think of this as a kind of manual \s-1ISO\-2022\s0 switching.
-.IP "Why do italic characters look as if clipped?" 4
-.IX Item "Why do italic characters look as if clipped?"
-Many fonts have difficulties with italic characters and hinting. For
-example, the otherwise very nicely hinted font \f(CW\*(C`xft:Bitstream Vera Sans
-Mono\*(C'\fR completely fails in it's italic face. A workaround might be to
-enable freetype autohinting, i.e. like this:
-.Sp
-.Vb 2
-\&   URxvt.italicFont:        xft:Bitstream Vera Sans Mono:italic:autohint=true
-\&   URxvt.boldItalicFont:    xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
-.Ve
-.IP "My input method wants <some encoding> but I want \s-1UTF\-8\s0, what can I do?" 4
-.IX Item "My input method wants <some encoding> but I want UTF-8, what can I do?"
-You can specify separate locales for the input method and the rest of the
-terminal, using the resource \f(CW\*(C`imlocale\*(C'\fR:
-.Sp
-.Vb 1
-\&   URxvt.imlocale: ja_JP.EUC-JP
-.Ve
-.Sp
-Now you can start your terminal with \f(CW\*(C`LC_CTYPE=ja_JP.UTF\-8\*(C'\fR and still
-use your input method. Please note, however, that you will not be able to
-input characters outside \f(CW\*(C`EUC\-JP\*(C'\fR in a normal way then, as your input
-method limits you.
-.IP "Rxvt-unicode crashes when the X Input Method changes or exits." 4
-.IX Item "Rxvt-unicode crashes when the X Input Method changes or exits."
-Unfortunately, this is unavoidable, as the \s-1XIM\s0 protocol is racy by
-design. Applications can avoid some crashes at the expense of memory
-leaks, and Input Methods can avoid some crashes by careful ordering at
-exit time. \fBkinput2\fR (and derived input methods) generally succeeds,
-while \fB\s-1SCIM\s0\fR (or similar input methods) fails. In the end, however,
-crashes cannot be completely avoided even if both sides cooperate.
-.Sp
-So the only workaround is not to kill your Input Method Servers.
-.IP "Rxvt-unicode uses gobs of memory, how can I reduce that?" 4
-.IX Item "Rxvt-unicode uses gobs of memory, how can I reduce that?"
-Rxvt-unicode tries to obey the rule of not charging you for something you
-don't use. One thing you should try is to configure out all settings that
-you don't need, for example, Xft support is a resource hog by design,
-when used. Compiling it out ensures that no Xft font will be loaded
-accidentally when rxvt-unicode tries to find a font for your characters.
-.Sp
-Also, many people (me included) like large windows and even larger
-scrollback buffers: Without \f(CW\*(C`\-\-enable\-unicode3\*(C'\fR, rxvt-unicode will use
-6 bytes per screen cell. For a 160x?? window this amounts to almost a
-kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
-use 10 Megabytes of memory. With \f(CW\*(C`\-\-enable\-unicode3\*(C'\fR it gets worse, as
-rxvt-unicode then uses 8 bytes per screen cell.
-.IP "Can I speed up Xft rendering somehow?" 4
-.IX Item "Can I speed up Xft rendering somehow?"
-Yes, the most obvious way to speed it up is to avoid Xft entirely, as
-it is simply slow. If you still want Xft fonts you might try to disable
-antialiasing (by appending \f(CW\*(C`:antialias=false\*(C'\fR), which saves lots of
-memory and also speeds up rendering considerably.
-.IP "Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?" 4
-.IX Item "Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?"
-Rxvt-unicode will use whatever you specify as a font. If it needs to
-fall back to it's default font search list it will prefer X11 core
-fonts, because they are small and fast, and then use Xft fonts. It has
-antialiasing disabled for most of them, because the author thinks they
-look best that way.
-.Sp
-If you want antialiasing, you have to specify the fonts manually.
-.IP "Mouse cut/paste suddenly no longer works." 4
-.IX Item "Mouse cut/paste suddenly no longer works."
-Make sure that mouse reporting is actually turned off since killing
-some editors prematurely may leave the mouse in mouse report mode. I've
-heard that tcsh may use mouse reporting unless it otherwise specified. A
-quick check is to see if cut/paste works when the Alt or Shift keys are
-depressed.
-.IP "What's with this bold/blink stuff?" 4
-.IX Item "What's with this bold/blink stuff?"
-If no bold colour is set via \f(CW\*(C`colorBD:\*(C'\fR, bold will invert text using the
-standard foreground colour.
-.Sp
-For the standard background colour, blinking will actually make the
-text blink when compiled with \f(CW\*(C`\-\-enable\-blinking\*(C'\fR. with standard
-colours. Without \f(CW\*(C`\-\-enable\-blinking\*(C'\fR, the blink attribute will be
-ignored.
-.Sp
-On \s-1ANSI\s0 colours, bold/blink attributes are used to set high-intensity
-foreground/background colors.
-.Sp
-color0\-7 are the low-intensity colors.
-.Sp
-color8\-15 are the corresponding high-intensity colors.
-.IP "I don't like the screen colors.  How do I change them?" 4
-.IX Item "I don't like the screen colors.  How do I change them?"
-You can change the screen colors at run-time using \fI~/.Xdefaults\fR
-resources (or as long\-options).
-.Sp
-Here are values that are supposed to resemble a \s-1VGA\s0 screen,
-including the murky brown that passes for low-intensity yellow:
-.Sp
-.Vb 8
-\&   URxvt.color0:   #000000
-\&   URxvt.color1:   #A80000
-\&   URxvt.color2:   #00A800
-\&   URxvt.color3:   #A8A800
-\&   URxvt.color4:   #0000A8
-\&   URxvt.color5:   #A800A8
-\&   URxvt.color6:   #00A8A8
-\&   URxvt.color7:   #A8A8A8
-.Ve
-.Sp
-.Vb 8
-\&   URxvt.color8:   #000054
-\&   URxvt.color9:   #FF0054
-\&   URxvt.color10:  #00FF54
-\&   URxvt.color11:  #FFFF54
-\&   URxvt.color12:  #0000FF
-\&   URxvt.color13:  #FF00FF
-\&   URxvt.color14:  #00FFFF
-\&   URxvt.color15:  #FFFFFF
-.Ve
-.Sp
-And here is a more complete set of non-standard colors described (not by
-me) as \*(L"pretty girly\*(R".
-.Sp
-.Vb 18
-\&   URxvt.cursorColor:  #dc74d1
-\&   URxvt.pointerColor: #dc74d1
-\&   URxvt.background:   #0e0e0e
-\&   URxvt.foreground:   #4ad5e1
-\&   URxvt.color0:       #000000
-\&   URxvt.color8:       #8b8f93
-\&   URxvt.color1:       #dc74d1
-\&   URxvt.color9:       #dc74d1
-\&   URxvt.color2:       #0eb8c7
-\&   URxvt.color10:      #0eb8c7
-\&   URxvt.color3:       #dfe37e
-\&   URxvt.color11:      #dfe37e
-\&   URxvt.color5:       #9e88f0
-\&   URxvt.color13:      #9e88f0
-\&   URxvt.color6:       #73f7ff
-\&   URxvt.color14:      #73f7ff
-\&   URxvt.color7:       #e1dddd
-\&   URxvt.color15:      #e1dddd
-.Ve
-.IP "How can I start @@RXVT_NAME@@d in a race-free way?" 4
-.IX Item "How can I start @@RXVT_NAME@@d in a race-free way?"
-Try \f(CW\*(C`@@RXVT_NAME@@d \-f \-o\*(C'\fR, which tells @@RXVT_NAME@@d to open the
-display, create the listening socket and then fork.
-.IP "What's with the strange Backspace/Delete key behaviour?" 4
-.IX Item "What's with the strange Backspace/Delete key behaviour?"
-Assuming that the physical Backspace key corresponds to the
-BackSpace keysym (not likely for Linux ... see the following
-question) there are two standard values that can be used for
-Backspace: \f(CW\*(C`^H\*(C'\fR and \f(CW\*(C`^?\*(C'\fR.
-.Sp
-Historically, either value is correct, but rxvt-unicode adopts the debian
-policy of using \f(CW\*(C`^?\*(C'\fR when unsure, because it's the one only only correct
-choice :).
-.Sp
-Rxvt-unicode tries to inherit the current stty settings and uses the value
-of `erase' to guess the value for backspace.  If rxvt-unicode wasn't
-started from a terminal (say, from a menu or by remote shell), then the
-system value of `erase', which corresponds to \s-1CERASE\s0 in <termios.h>, will
-be used (which may not be the same as your stty setting).
-.Sp
-For starting a new rxvt\-unicode:
-.Sp
-.Vb 3
-\&   # use Backspace = ^H
-\&   $ stty erase ^H
-\&   $ @@RXVT_NAME@@
-.Ve
-.Sp
-.Vb 3
-\&   # use Backspace = ^?
-\&   $ stty erase ^?
-\&   $ @@RXVT_NAME@@
-.Ve
-.Sp
-Toggle with \f(CW\*(C`ESC [ 36 h\*(C'\fR / \f(CW\*(C`ESC [ 36 l\*(C'\fR.
-.Sp
-For an existing rxvt\-unicode:
-.Sp
-.Vb 3
-\&   # use Backspace = ^H
-\&   $ stty erase ^H
-\&   $ echo -n "^[[36h"
-.Ve
-.Sp
-.Vb 3
-\&   # use Backspace = ^?
-\&   $ stty erase ^?
-\&   $ echo -n "^[[36l"
-.Ve
-.Sp
-This helps satisfy some of the Backspace discrepancies that occur, but
-if you use Backspace = \f(CW\*(C`^H\*(C'\fR, make sure that the termcap/terminfo value
-properly reflects that.
-.Sp
-The Delete key is a another casualty of the ill-defined Backspace problem.
-To avoid confusion between the Backspace and Delete keys, the Delete
-key has been assigned an escape sequence to match the vt100 for Execute
-(\f(CW\*(C`ESC [ 3 ~\*(C'\fR) and is in the supplied termcap/terminfo.
-.Sp
-Some other Backspace problems:
-.Sp
-some editors use termcap/terminfo,
-some editors (vim I'm told) expect Backspace = ^H,
-\&\s-1GNU\s0 Emacs (and Emacs-like editors) use ^H for help.
-.Sp
-Perhaps someday this will all be resolved in a consistent manner.
-.IP "I don't like the key\-bindings.  How do I change them?" 4
-.IX Item "I don't like the key-bindings.  How do I change them?"
-There are some compile-time selections available via configure. Unless
-you have run \*(L"configure\*(R" with the \f(CW\*(C`\-\-disable\-resources\*(C'\fR option you can
-use the `keysym' resource to alter the keystrings associated with keysyms.
-.Sp
-Here's an example for a URxvt session started using \f(CW\*(C`@@RXVT_NAME@@ \-name URxvt\*(C'\fR
-.Sp
-.Vb 20
-\&   URxvt.keysym.Home:          \e033[1~
-\&   URxvt.keysym.End:           \e033[4~
-\&   URxvt.keysym.C-apostrophe:  \e033<C-'>
-\&   URxvt.keysym.C-slash:       \e033<C-/>
-\&   URxvt.keysym.C-semicolon:   \e033<C-;>
-\&   URxvt.keysym.C-grave:       \e033<C-`>
-\&   URxvt.keysym.C-comma:       \e033<C-,>
-\&   URxvt.keysym.C-period:      \e033<C-.>
-\&   URxvt.keysym.C-0x60:        \e033<C-`>
-\&   URxvt.keysym.C-Tab:         \e033<C-Tab>
-\&   URxvt.keysym.C-Return:      \e033<C-Return>
-\&   URxvt.keysym.S-Return:      \e033<S-Return>
-\&   URxvt.keysym.S-space:       \e033<S-Space>
-\&   URxvt.keysym.M-Up:          \e033<M-Up>
-\&   URxvt.keysym.M-Down:        \e033<M-Down>
-\&   URxvt.keysym.M-Left:        \e033<M-Left>
-\&   URxvt.keysym.M-Right:       \e033<M-Right>
-\&   URxvt.keysym.M-C-0:         list \e033<M-C- 0123456789 >
-\&   URxvt.keysym.M-C-a:         list \e033<M-C- abcdefghijklmnopqrstuvwxyz >
-\&   URxvt.keysym.F12:           command:\e033]701;zh_CN.GBK\e007
-.Ve
-.Sp
-See some more examples in the documentation for the \fBkeysym\fR resource.
-.IP "I'm using keyboard model \s-1XXX\s0 that has extra Prior/Next/Insert keys. How do I make use of them?  For example, the Sun Keyboard type 4 has the following mappings that rxvt-unicode doesn't recognize." 4
-.IX Item "I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them?  For example, the Sun Keyboard type 4 has the following mappings that rxvt-unicode doesn't recognize."
-.Vb 6
-\&   KP_Insert == Insert
-\&   F22 == Print
-\&   F27 == Home
-\&   F29 == Prior
-\&   F33 == End
-\&   F35 == Next
-.Ve
-.Sp
-Rather than have rxvt-unicode try to accommodate all the various possible
-keyboard mappings, it is better to use `xmodmap' to remap the keys as
-required for your particular machine.
-.IP "How do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc." 4
-.IX Item "How do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc."
-rxvt and rxvt-unicode always export the variable \*(L"\s-1COLORTERM\s0\*(R", so you can
-check and see if that is set. Note that several programs, \s-1JED\s0, slrn,
-Midnight Commander automatically check this variable to decide whether or
-not to use color.
-.IP "How do I set the correct, full \s-1IP\s0 address for the \s-1DISPLAY\s0 variable?" 4
-.IX Item "How do I set the correct, full IP address for the DISPLAY variable?"
-If you've compiled rxvt-unicode with \s-1DISPLAY_IS_IP\s0 and have enabled
-insecure mode then it is possible to use the following shell script
-snippets to correctly set the display. If your version of rxvt-unicode
-wasn't also compiled with \s-1ESCZ_ANSWER\s0 (as assumed in these snippets) then
-the \s-1COLORTERM\s0 variable can be used to distinguish rxvt-unicode from a
-regular xterm.
-.Sp
-Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
-snippets:
-.Sp
-.Vb 12
-\&   # Bourne/Korn/POSIX family of shells:
-\&   [ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
-\&   if [ ${TERM:-foo} = xterm ]; then
-\&      stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
-\&      echo -n '^[Z'
-\&      read term_id
-\&      stty icanon echo
-\&      if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
-\&         echo -n '^[[7n'        # query the rxvt we are in for the DISPLAY string
-\&         read DISPLAY           # set it in our local shell
-\&      fi
-\&   fi
-.Ve
-.IP "How do I compile the manual pages for myself?" 4
-.IX Item "How do I compile the manual pages for myself?"
-You need to have a recent version of perl installed as \fI/usr/bin/perl\fR,
-one that comes with \fIpod2man\fR, \fIpod2text\fR and \fIpod2html\fR. Then go to
-the doc subdirectory and enter \f(CW\*(C`make alldoc\*(C'\fR.
-.IP "My question isn't answered here, can I ask a human?" 4
-.IX Item "My question isn't answered here, can I ask a human?"
-Before sending me mail, you could go to \s-1IRC:\s0 \f(CW\*(C`irc.freenode.net\*(C'\fR,
-channel \f(CW\*(C`#rxvt\-unicode\*(C'\fR has some rxvt-unicode enthusiasts that might be
-interested in learning about new and exciting problems (but not FAQs :).
-.SH "RXVT TECHNICAL REFERENCE"
+.SH "RXVT-UNICODE TECHNICAL REFERENCE"
-.IX Header "RXVT TECHNICAL REFERENCE"
+.IX Header "RXVT-UNICODE TECHNICAL REFERENCE"
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
 The rest of this document describes various technical aspects of
 \&\fBrxvt-unicode\fR. First the description of supported command sequences,
 followed by pixmap support and last by a description of all features
 selectable at \f(CW\*(C`configure\*(C'\fR time.
-.SH "Definitions"
+.Sh "Definitions"
-.IX Header "Definitions"
+.IX Subsection "Definitions"
 .ie n .IP "\fB\fB""c""\fB\fR" 4
 .el .IP "\fB\f(CBc\fB\fR" 4
 .IX Item "c"
 The literal character c.
 .ie n .IP "\fB\fB""C""\fB\fR" 4
 parameters, separated by \f(CW\*(C`;\*(C'\fR character(s).
 .ie n .IP "\fB\fB""Pt""\fB\fR" 4
 .el .IP "\fB\f(CBPt\fB\fR" 4
 .IX Item "Pt"
 A text parameter composed of printable characters.
-.SH "Values"
+.Sh "Values"
-.IX Header "Values"
+.IX Subsection "Values"
 .ie n .IP "\fB\fB""ENQ""\fB\fR" 4
 .el .IP "\fB\f(CBENQ\fB\fR" 4
 .IX Item "ENQ"
 Enquiry (Ctrl\-E) = Send Device Attributes (\s-1DA\s0)
 request attributes from terminal. See \fB\f(CB\*(C`ESC [ Ps c\*(C'\fB\fR.
 Switch to Standard Character Set
 .ie n .IP "\fB\fB""SPC""\fB\fR" 4
 .el .IP "\fB\f(CBSPC\fB\fR" 4
 .IX Item "SPC"
 Space Character
-.SH "Escape Sequences"
+.Sh "Escape Sequences"
-.IX Header "Escape Sequences"
+.IX Subsection "Escape Sequences"
 .ie n .IP "\fB\fB""ESC # 8""\fB\fR" 4
 .el .IP "\fB\f(CBESC # 8\fB\fR" 4
 .IX Item "ESC # 8"
 \&\s-1DEC\s0 Screen Alignment Test (\s-1DECALN\s0)
 .ie n .IP "\fB\fB""ESC 7""\fB\fR" 4
 C = <	Multinational character set unimplemented
 C = 5 	Finnish character set unimplemented
 C = C 	Finnish character set unimplemented
 C = K 	German character set unimplemented
 .TE
 .PP
 .IX Xref "CSI"
-.SH "CSI (Command Sequence Introducer) Sequences"
+.Sh "\s-1CSI\s0 (Command Sequence Introducer) Sequences"
-.IX Header "CSI (Command Sequence Introducer) Sequences"
+.IX Subsection "CSI (Command Sequence Introducer) Sequences"
 .ie n .IP "\fB\fB""ESC [ Ps @""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps @\fB\fR" 4
 .IX Item "ESC [ Ps @"
 Insert \fB\f(CB\*(C`Ps\*(C'\fB\fR (Blank) Character(s) [default: 1] (\s-1ICH\s0)
 .IX Xref "ESCOBPsA"
 l l .
 Ps = 0	Clear Below (default)
 Ps = 1	Clear Above
 Ps = 2	Clear All
 .TE
 .ie n .IP "\fB\fB""ESC [ Ps K""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps K\fB\fR" 4
 .IX Item "ESC [ Ps K"
 Erase in Line (\s-1EL\s0)
 .TS
 l l .
 Ps = 0	Clear to Right (default)
 Ps = 1	Clear to Left
 Ps = 2	Clear All
 .TE
 .ie n .IP "\fB\fB""ESC [ Ps L""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps L\fB\fR" 4
 .IX Item "ESC [ Ps L"
 Insert \fB\f(CB\*(C`Ps\*(C'\fB\fR Line(s) [default: 1] (\s-1IL\s0)
 .ie n .IP "\fB\fB""ESC [ Ps M""\fB\fR" 4
 l l .
 Ps = 0	Tab Set (HTS)
 Ps = 2	Tab Clear (TBC), Clear Current Column (default)
 Ps = 5	Tab Clear (TBC), Clear All
 .TE
 .ie n .IP "\fB\fB""ESC [ Ps X""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps X\fB\fR" 4
 .IX Item "ESC [ Ps X"
 Erase \fB\f(CB\*(C`Ps\*(C'\fB\fR Character(s) [default: 1] (\s-1ECH\s0)
 .ie n .IP "\fB\fB""ESC [ Ps Z""\fB\fR" 4
 .TS
 l l .
 Ps = 0	Clear Current Column (default)
 Ps = 3	Clear All (TBC)
 .TE
 .ie n .IP "\fB\fB""ESC [ Pm h""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Pm h\fB\fR" 4
 .IX Item "ESC [ Pm h"
 Set Mode (\s-1SM\s0). See \fB\f(CB\*(C`ESC [ Pm l\*(C'\fB\fR sequence for description of \f(CW\*(C`Pm\*(C'\fR.
 .ie n .IP "\fB\fB""ESC [ Ps i""\fB\fR" 4
 l l .
 Ps = 0	print screen (MC0)
 Ps = 4	disable transparent print mode (MC4)
 Ps = 5	enable transparent print mode (MC5)
 .TE
 .ie n .IP "\fB\fB""ESC [ Pm l""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Pm l\fB\fR" 4
 .IX Item "ESC [ Pm l"
 Reset Mode (\s-1RM\s0)
 .RS 4
 .TS
 l l .
 h	Insert Mode (SMIR)
 l	Replace Mode (RMIR)
 .TE
 .PD 0
 .ie n .IP "\fB\fB""Ps = 20""\fB\fR (partially implemented)" 4
 .el .IP "\fB\f(CBPs = 20\fB\fR (partially implemented)" 4
 .IX Item "Ps = 20 (partially implemented)"
 .TS
 l l .
 h	Automatic Newline (LNM)
 l	Normal Linefeed (LNM)
 .TE
 .RE
 .RS 4
 .RE
 .ie n .IP "\fB\fB""ESC [ Pm m""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Pm m\fB\fR" 4
 Ps = 95 / 105	fg/bg Bright Magenta
 Ps = 96 / 106	fg/bg Bright Cyan
 Ps = 97 / 107	fg/bg Bright White
 Ps = 99 / 109	fg/bg Bright Default
 .TE
 .ie n .IP "\fB\fB""ESC [ Ps n""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps n\fB\fR" 4
 .IX Item "ESC [ Ps n"
 Device Status Report (\s-1DSR\s0)
 .TS
 Ps = 5	Status Report ESC [ 0 n (``OK'')
 Ps = 6	Report Cursor Position (CPR) [row;column] as ESC [ r ; c R
 Ps = 7	Request Display Name
 Ps = 8	Request Version Number (place in window title)
 .TE
 .ie n .IP "\fB\fB""ESC [ Ps;Ps r""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ Ps;Ps r\fB\fR" 4
 .IX Item "ESC [ Ps;Ps r"
 Set Scrolling Region [top;bottom]
 [default: full size of window] (\s-1CSR\s0)
 Ps = 19	Currently the same as Ps = 18, but responds with Ps = 9
 Ps = 20	Reports icon label (ESC ] L NAME \234)
 Ps = 21	Reports window title (ESC ] l NAME \234)
 Ps = 24..	Set window height to Ps rows
 .TE
 .ie n .IP "\fB\fB""ESC [ u""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ u\fB\fR" 4
 .IX Item "ESC [ u"
 Restore Cursor
 .ie n .IP "\fB\fB""ESC [ Ps x""\fB\fR" 4
 .IX Item "ESC [ Ps x"
 Request Terminal Parameters (\s-1DECREQTPARM\s0)
 .PP
 .IX Xref "PrivateModes"
-.SH "DEC Private Modes"
+.Sh "\s-1DEC\s0 Private Modes"
-.IX Header "DEC Private Modes"
+.IX Subsection "DEC Private Modes"
 .ie n .IP "\fB\fB""ESC [ ? Pm h""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ ? Pm h\fB\fR" 4
 .IX Item "ESC [ ? Pm h"
 \&\s-1DEC\s0 Private Mode Set (\s-1DECSET\s0)
 .ie n .IP "\fB\fB""ESC [ ? Pm l""\fB\fR" 4
 .ie n .IP "\fB\fB""ESC [ ? Pm t""\fB\fR" 4
 .el .IP "\fB\f(CBESC [ ? Pm t\fB\fR" 4
 .IX Item "ESC [ ? Pm t"
 Toggle \s-1DEC\s0 Private Mode Values (rxvt extension). \fIwhere\fR
 .RS 4
-.ie n .IP "\fB\fB""Ps = 1""\fB\fR (\s-1DECCKM\s0)" 4
+.ie n .IP "\fB\fB""Pm = 1""\fB\fR (\s-1DECCKM\s0)" 4
-.el .IP "\fB\f(CBPs = 1\fB\fR (\s-1DECCKM\s0)" 4
+.el .IP "\fB\f(CBPm = 1\fB\fR (\s-1DECCKM\s0)" 4
-.IX Item "Ps = 1 (DECCKM)"
+.IX Item "Pm = 1 (DECCKM)"
 .TS
 l l .
 h	Application Cursor Keys
 l	Normal Cursor Keys
 .TE
 .PD 0
-.ie n .IP "\fB\fB""Ps = 2""\fB\fR (\s-1ANSI/VT52\s0 mode)" 4
+.ie n .IP "\fB\fB""Pm = 2""\fB\fR (\s-1ANSI/VT52\s0 mode)" 4
-.el .IP "\fB\f(CBPs = 2\fB\fR (\s-1ANSI/VT52\s0 mode)" 4
+.el .IP "\fB\f(CBPm = 2\fB\fR (\s-1ANSI/VT52\s0 mode)" 4
-.IX Item "Ps = 2 (ANSI/VT52 mode)"
+.IX Item "Pm = 2 (ANSI/VT52 mode)"
 .TS
 l l .
 h	Enter VT52 mode
 l	Enter VT52 mode
 .TE
-.ie n .IP "\fB\fB""Ps = 3""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 3""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 3\fB\fR" 4
+.el .IP "\fB\f(CBPm = 3\fB\fR" 4
-.IX Item "Ps = 3"
+.IX Item "Pm = 3"
 .TS
 l l .
 h	132 Column Mode (DECCOLM)
 l	80 Column Mode (DECCOLM)
 .TE
-.ie n .IP "\fB\fB""Ps = 4""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 4""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 4\fB\fR" 4
+.el .IP "\fB\f(CBPm = 4\fB\fR" 4
-.IX Item "Ps = 4"
+.IX Item "Pm = 4"
 .TS
 l l .
 h	Smooth (Slow) Scroll (DECSCLM)
 l	Jump (Fast) Scroll (DECSCLM)
 .TE
-.ie n .IP "\fB\fB""Ps = 5""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 5""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 5\fB\fR" 4
+.el .IP "\fB\f(CBPm = 5\fB\fR" 4
-.IX Item "Ps = 5"
+.IX Item "Pm = 5"
 .TS
 l l .
 h	Reverse Video (DECSCNM)
 l	Normal Video (DECSCNM)
 .TE
-.ie n .IP "\fB\fB""Ps = 6""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 6""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 6\fB\fR" 4
+.el .IP "\fB\f(CBPm = 6\fB\fR" 4
-.IX Item "Ps = 6"
+.IX Item "Pm = 6"
 .TS
 l l .
 h	Origin Mode (DECOM)
 l	Normal Cursor Mode (DECOM)
 .TE
-.ie n .IP "\fB\fB""Ps = 7""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 7""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 7\fB\fR" 4
+.el .IP "\fB\f(CBPm = 7\fB\fR" 4
-.IX Item "Ps = 7"
+.IX Item "Pm = 7"
 .TS
 l l .
 h	Wraparound Mode (DECAWM)
 l	No Wraparound Mode (DECAWM)
 .TE
-.ie n .IP "\fB\fB""Ps = 8""\fB\fR \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 8""\fB\fR \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 8\fB\fR \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 8\fB\fR \fIunimplemented\fR" 4
-.IX Item "Ps = 8 unimplemented"
+.IX Item "Pm = 8 unimplemented"
 .TS
 l l .
 h	Auto-repeat Keys (DECARM)
 l	No Auto-repeat Keys (DECARM)
 .TE
-.ie n .IP "\fB\fB""Ps = 9""\fB\fR X10 XTerm" 4
+.ie n .IP "\fB\fB""Pm = 9""\fB\fR X10 XTerm" 4
-.el .IP "\fB\f(CBPs = 9\fB\fR X10 XTerm" 4
+.el .IP "\fB\f(CBPm = 9\fB\fR X10 XTerm" 4
-.IX Item "Ps = 9 X10 XTerm"
+.IX Item "Pm = 9 X10 XTerm"
 .TS
 l l .
 h	Send Mouse X & Y on button press.
 l	No mouse reporting.
 .TE
-.ie n .IP "\fB\fB""Ps = 25""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 25""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 25\fB\fR" 4
+.el .IP "\fB\f(CBPm = 25\fB\fR" 4
-.IX Item "Ps = 25"
+.IX Item "Pm = 25"
 .TS
 l l .
 h	Visible cursor {cnorm/cvvis}
 l	Invisible cursor {civis}
 .TE
-.ie n .IP "\fB\fB""Ps = 30""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 30""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 30\fB\fR" 4
+.el .IP "\fB\f(CBPm = 30\fB\fR" 4
-.IX Item "Ps = 30"
+.IX Item "Pm = 30"
 .TS
 l l .
 h	scrollBar visisble
 l	scrollBar invisisble
 .TE
-.ie n .IP "\fB\fB""Ps = 35""\fB\fR (\fBrxvt\fR)" 4
+.ie n .IP "\fB\fB""Pm = 35""\fB\fR (\fBrxvt\fR)" 4
-.el .IP "\fB\f(CBPs = 35\fB\fR (\fBrxvt\fR)" 4
+.el .IP "\fB\f(CBPm = 35\fB\fR (\fBrxvt\fR)" 4
-.IX Item "Ps = 35 (rxvt)"
+.IX Item "Pm = 35 (rxvt)"
 .TS
 l l .
 h	Allow XTerm Shift+key sequences
 l	Disallow XTerm Shift+key sequences
 .TE
-.ie n .IP "\fB\fB""Ps = 38""\fB\fR \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 38""\fB\fR \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 38\fB\fR \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 38\fB\fR \fIunimplemented\fR" 4
-.IX Item "Ps = 38 unimplemented"
+.IX Item "Pm = 38 unimplemented"
 .PD
 Enter Tektronix Mode (\s-1DECTEK\s0)
-.ie n .IP "\fB\fB""Ps = 40""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 40""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 40\fB\fR" 4
+.el .IP "\fB\f(CBPm = 40\fB\fR" 4
-.IX Item "Ps = 40"
+.IX Item "Pm = 40"
 .TS
 l l .
 h	Allow 80/132 Mode
 l	Disallow 80/132 Mode
 .TE
 .PD 0
-.ie n .IP "\fB\fB""Ps = 44""\fB\fR \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 44""\fB\fR \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 44\fB\fR \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 44\fB\fR \fIunimplemented\fR" 4
-.IX Item "Ps = 44 unimplemented"
+.IX Item "Pm = 44 unimplemented"
 .TS
 l l .
 h	Turn On Margin Bell
 l	Turn Off Margin Bell
 .TE
-.ie n .IP "\fB\fB""Ps = 45""\fB\fR \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 45""\fB\fR \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 45\fB\fR \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 45\fB\fR \fIunimplemented\fR" 4
-.IX Item "Ps = 45 unimplemented"
+.IX Item "Pm = 45 unimplemented"
 .TS
 l l .
 h	Reverse-wraparound Mode
 l	No Reverse-wraparound Mode
 .TE
-.ie n .IP "\fB\fB""Ps = 46""\fB\fR \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 46""\fB\fR \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 46\fB\fR \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 46\fB\fR \fIunimplemented\fR" 4
-.IX Item "Ps = 46 unimplemented"
+.IX Item "Pm = 46 unimplemented"
-.ie n .IP "\fB\fB""Ps = 47""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 47""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 47\fB\fR" 4
+.el .IP "\fB\f(CBPm = 47\fB\fR" 4
-.IX Item "Ps = 47"
+.IX Item "Pm = 47"
 .TS
 l l .
 h	Use Alternate Screen Buffer
 l	Use Normal Screen Buffer
 .TE
 .PD
 .IX Xref "Priv66"
-.ie n .IP "\fB\fB""Ps = 66""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 66""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 66\fB\fR" 4
+.el .IP "\fB\f(CBPm = 66\fB\fR" 4
-.IX Item "Ps = 66"
+.IX Item "Pm = 66"
 .TS
 l l .
 h	Application Keypad (DECPAM) == ESC =
 l	Normal Keypad (DECPNM) == ESC >
 .TE
 .PD 0
-.ie n .IP "\fB\fB""Ps = 67""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 67""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 67\fB\fR" 4
+.el .IP "\fB\f(CBPm = 67\fB\fR" 4
-.IX Item "Ps = 67"
+.IX Item "Pm = 67"
 .TS
 l l .
 h	Backspace key sends BS (DECBKM)
 l	Backspace key sends DEL
 .TE
-.ie n .IP "\fB\fB""Ps = 1000""\fB\fR (X11 XTerm)" 4
+.ie n .IP "\fB\fB""Pm = 1000""\fB\fR (X11 XTerm)" 4
-.el .IP "\fB\f(CBPs = 1000\fB\fR (X11 XTerm)" 4
+.el .IP "\fB\f(CBPm = 1000\fB\fR (X11 XTerm)" 4
-.IX Item "Ps = 1000 (X11 XTerm)"
+.IX Item "Pm = 1000 (X11 XTerm)"
 .TS
 l l .
 h	Send Mouse X & Y on button press and release.
 l	No mouse reporting.
 .TE
-.ie n .IP "\fB\fB""Ps = 1001""\fB\fR (X11 XTerm) \fIunimplemented\fR" 4
+.ie n .IP "\fB\fB""Pm = 1001""\fB\fR (X11 XTerm) \fIunimplemented\fR" 4
-.el .IP "\fB\f(CBPs = 1001\fB\fR (X11 XTerm) \fIunimplemented\fR" 4
+.el .IP "\fB\f(CBPm = 1001\fB\fR (X11 XTerm) \fIunimplemented\fR" 4
-.IX Item "Ps = 1001 (X11 XTerm) unimplemented"
+.IX Item "Pm = 1001 (X11 XTerm) unimplemented"
 .TS
 l l .
 h	Use Hilite Mouse Tracking.
 l	No mouse reporting.
 .TE
-.ie n .IP "\fB\fB""Ps = 1010""\fB\fR (\fBrxvt\fR)" 4
+.ie n .IP "\fB\fB""Pm = 1010""\fB\fR (\fBrxvt\fR)" 4
-.el .IP "\fB\f(CBPs = 1010\fB\fR (\fBrxvt\fR)" 4
+.el .IP "\fB\f(CBPm = 1010\fB\fR (\fBrxvt\fR)" 4
-.IX Item "Ps = 1010 (rxvt)"
+.IX Item "Pm = 1010 (rxvt)"
 .TS
 l l .
 h	Don't scroll to bottom on TTY output
 l	Scroll to bottom on TTY output
 .TE
-.ie n .IP "\fB\fB""Ps = 1011""\fB\fR (\fBrxvt\fR)" 4
+.ie n .IP "\fB\fB""Pm = 1011""\fB\fR (\fBrxvt\fR)" 4
-.el .IP "\fB\f(CBPs = 1011\fB\fR (\fBrxvt\fR)" 4
+.el .IP "\fB\f(CBPm = 1011\fB\fR (\fBrxvt\fR)" 4
-.IX Item "Ps = 1011 (rxvt)"
+.IX Item "Pm = 1011 (rxvt)"
 .TS
 l l .
 h	Scroll to bottom when a key is pressed
 l	Don't scroll to bottom when a key is pressed
 .TE
-.ie n .IP "\fB\fB""Ps = 1021""\fB\fR (\fBrxvt\fR)" 4
+.ie n .IP "\fB\fB""Pm = 1021""\fB\fR (\fBrxvt\fR)" 4
-.el .IP "\fB\f(CBPs = 1021\fB\fR (\fBrxvt\fR)" 4
+.el .IP "\fB\f(CBPm = 1021\fB\fR (\fBrxvt\fR)" 4
-.IX Item "Ps = 1021 (rxvt)"
+.IX Item "Pm = 1021 (rxvt)"
 .TS
 l l .
 h	Bold/italic implies high intensity (see option -is)
 l	Font styles have no effect on intensity (Compile styles)
 .TE
-.ie n .IP "\fB\fB""Ps = 1047""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 1047""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 1047\fB\fR" 4
+.el .IP "\fB\f(CBPm = 1047\fB\fR" 4
-.IX Item "Ps = 1047"
+.IX Item "Pm = 1047"
 .TS
 l l .
 h	Use Alternate Screen Buffer
 l	Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
 .TE
-.ie n .IP "\fB\fB""Ps = 1048""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 1048""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 1048\fB\fR" 4
+.el .IP "\fB\f(CBPm = 1048\fB\fR" 4
-.IX Item "Ps = 1048"
+.IX Item "Pm = 1048"
 .TS
 l l .
 h	Save cursor position
 l	Restore cursor position
 .TE
-.ie n .IP "\fB\fB""Ps = 1049""\fB\fR" 4
+.ie n .IP "\fB\fB""Pm = 1049""\fB\fR" 4
-.el .IP "\fB\f(CBPs = 1049\fB\fR" 4
+.el .IP "\fB\f(CBPm = 1049\fB\fR" 4
-.IX Item "Ps = 1049"
+.IX Item "Pm = 1049"
 .TS
 l l .
 h	Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it
 l	Use Normal Screen Buffer
 .TE
 .RE
 .RS 4
 .RE
 .PD
 .PP
 .IX Xref "XTerm"
-.SH "XTerm Operating System Commands"
+.Sh "XTerm Operating System Commands"
-.IX Header "XTerm Operating System Commands"
+.IX Subsection "XTerm Operating System Commands"
 .ie n .IP "\fB\fB""ESC ] Ps;Pt ST""\fB\fR" 4
 .el .IP "\fB\f(CBESC ] Ps;Pt ST\fB\fR" 4
 .IX Item "ESC ] Ps;Pt ST"
 Set XTerm Parameters. 8\-bit \s-1ST:\s0 0x9c, 7\-bit \s-1ST\s0 sequence: \s-1ESC\s0 \e (0x1b,
 0x5c), backwards compatible terminator \s-1BEL\s0 (0x07) is also accepted. any
 Ps = 713	Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles).
 Ps = 720	Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
 Ps = 721	Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
 Ps = 777	Call the perl extension with the given string, which should be of the form extension:parameters (Compile perl).
 .TE
-.PP
-.IX Xref "XPM"
 .SH "XPM"
 .IX Header "XPM"
 For the \s-1XPM\s0 XTerm escape sequence \fB\f(CB\*(C`ESC ] 20 ; Pt ST\*(C'\fB\fR then value
 of \fB\f(CB\*(C`Pt\*(C'\fB\fR can be the name of the background pixmap followed by a
 sequence of scaling/positioning commands separated by semi\-colons. The
 0	Button1 pressed
 1	Button2 pressed
 2	Button3 pressed
 3	button released (X11 mouse report)
 .TE
 .PP
 The upper bits of \fB\f(CB\*(C`<b>\*(C'\fB\fR indicate the modifiers when the
 button was pressed and are added together (X11 mouse report only):
 .ie n .IP "State = \fB\fB""(<b> \- SPACE) & 60""\fB\fR" 4
 .el .IP "State = \fB\f(CB(<b> \- SPACE) & 60\fB\fR" 4
 .TS
 l l .
 4	Shift
 8	Meta
 16	Control
-32	Double Click (Rxvt extension)
+32	Double Click (rxvt extension)
 .TE
 Col = \fB\f(CB\*(C`<x> \- SPACE\*(C'\fB\fR
 .Sp
 Row = \fB\f(CB\*(C`<y> \- SPACE\*(C'\fB\fR
 .SH "Key Codes"
 .IX Header "Key Codes"
 XK_KP_6	6			ESC O v
 XK_KP_7	7			ESC O w
 XK_KP_8	8			ESC O x
 XK_KP_9	9			ESC O y
 .TE
 .SH "CONFIGURE OPTIONS"
 .IX Header "CONFIGURE OPTIONS"
 General hint: if you get compile errors, then likely your configuration
 hasn't been tested well. Either try with \f(CW\*(C`\-\-enable\-everything\*(C'\fR or use
 the \fI./reconf\fR script as a base for experiments. \fI./reconf\fR is used by
 zh_ext	rarely used but very big chinese encodigs
 jp	common japanese encodings
 jp_ext	rarely used but big japanese encodings
 kr	korean encodings
 .TE
 .IP "\-\-enable\-xim (default: on)" 4
 .IX Item "--enable-xim (default: on)"
 Add support for \s-1XIM\s0 (X Input Method) protocol. This allows using
 alternative input methods (e.g. kinput2) and will also correctly
 set up the input for people using dead keys or compose keys.
 disable this.
 .Sp
 A non-exhaustive list of features enabled by \f(CW\*(C`\-\-enable\-frills\*(C'\fR (possibly
 in combination with other switches) is:
 .Sp
-.Vb 18
+.Vb 10
-\&  MWM-hints
+\&  MWM\-hints
-\&  EWMH-hints (pid, utf8 names) and protocols (ping)
+\&  EWMH\-hints (pid, utf8 names) and protocols (ping)
-\&  seperate underline colour (-underlineColor)
+\&  seperate underline colour (\-underlineColor)
-\&  settable border widths and borderless switch (-w, -b, -bl)
+\&  settable border widths and borderless switch (\-w, \-b, \-bl)
-\&  visual selection (-depth)
+\&  visual depth selection (\-depth)
-\&  settable extra linespacing /-lsp)
+\&  settable extra linespacing /\-lsp)
-\&  iso-14755-2 and -3, and visual feedback
+\&  iso\-14755\-2 and \-3, and visual feedback
+\&  tripleclickwords (\-tcw)
+\&  settable insecure mode (\-insecure)
+\&  keysym remapping support
+\&  cursor blinking and underline cursor (\-cb, \-uc)
+\&  XEmbed support (\-embed)
+\&  user\-pty (\-pty\-fd)
+\&  hold on exit (\-hold)
+\&  skip builtin block graphics (\-sbg)
+\&  separate highlightcolor support (\-hc)
+.Ve
+.Sp
+It also enables some non-essential features otherwise disabled, such as:
+.Sp
+.Vb 11
+\&  some round\-trip time optimisations
+\&  nearest color allocation on pseudocolor screens
+\&  UTF8_STRING supporr for selection
+\&  sgr modes 90..97 and 100..107
-\&  backindex and forwardindex escape sequence
+\&  backindex and forwardindex escape sequences
+\&  view change/zero scorllback esacpe sequences
+\&  locale switching escape sequence
 \&  window op and some xterm/OSC escape sequences
-\&  tripleclickwords (-tcw)
+\&  rectangular selections
-\&  settable insecure mode (-insecure)
+\&  trailing space removal for selections
-\&  keysym remapping support
+\&  verbose X error handling
-\&  cursor blinking and underline cursor (-cb, -uc)
-\&  XEmbed support (-embed)
-\&  user-pty (-pty-fd)
-\&  hold on exit (-hold)
-\&  skip builtin block graphics (-sbg)
-\&  sgr modes 90..97 and 100..107
 .Ve
 .IP "\-\-enable\-iso14755 (default: on)" 4
 .IX Item "--enable-iso14755 (default: on)"
 Enable extended \s-1ISO\s0 14755 support (see @@RXVT_NAME@@(1), or
 \&\fIdoc/rxvt.1.txt\fR). Basic support (section 5.1) is enabled by
 .IX Item "--disable-new-selection"
 Remove support for mouse selection style like that of xterm.
 .IP "\-\-enable\-dmalloc (default: off)" 4
 .IX Item "--enable-dmalloc (default: off)"
 Use Gray Watson's malloc \- which is good for debugging See
-http://www.letters.com/dmalloc/ for details If you use either this or the
+<http://www.letters.com/dmalloc/> for details If you use either this or the
 next option, you may need to edit src/Makefile after compiling to point
 \&\s-1DINCLUDE\s0 and \s-1DLIB\s0 to the right places.
 .Sp
 You can only use either this option and the following (should
 you use either) .
 .IX Header "AUTHORS"
 Marc Lehmann <rxvt@schmorp.de> converted this document to pod and
 reworked it from the original Rxvt documentation, which was done by Geoff
 Wing <gcw@pobox.com>, who in turn used the XTerm documentation and other
 sources.
+.SH "POD ERRORS"
+.IX Header "POD ERRORS"
+Hey! \fBThe above document had some coding errors, which are explained below:\fR
+.IP "Around line 2952:" 4
+.IX Item "Around line 2952:"
+=back doesn't take any parameters, but you said =back  X<Mouse>
+.IP "Around line 3048:" 4
+.IX Item "Around line 3048:"
+=back doesn't take any parameters, but you said =back  X<KeyCodes>

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.7.man.in (file contents): Revision 1.54 by root, Sat Jan 28 22:16:58 2006 UTC vs. Revision 1.77 by root, Thu Jul 6 19:43:21 2006 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.7.man.in (file contents):
Revision 1.54 by root, Sat Jan 28 22:16:58 2006 UTC vs.
Revision 1.77 by root, Thu Jul 6 19:43:21 2006 UTC