ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/rxvt-unicode/doc/rxvt.7.pod

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.29 by root, Wed Dec 29 19:17:18 2004 UTC vs.
Revision 1.135 by ayin, Sun Jun 24 23:30:17 2007 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	RXVT REFERENCE - FAQ, command sequences and other background information	3	RXVT REFERENCE - FAQ, command sequences and other background information
4		4
		5	=head1 SYNOPSIS
		6
		7	# set a new font set
		8	printf '\33]50;%s\007' 9x15,xft:Kochi" Mincho"
		9
		10	# change the locale and tell rxvt-unicode about it
		11	export LC_CTYPE=ja_JP.EUC-JP; printf "\33]701;$LC_CTYPE\007"
		12
		13	# set window title
		14	printf '\33]2;%s\007' "new window title"
		15
		16	=head1 DESCRIPTION
		17
		18	This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting
		19	all escape sequences, and other background information.
		20
		21	The newest version of this document is also available on the World Wide Web at
		22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.
		23
5	=head1 FREQUENTLY ASKED QUESTIONS	24	=head1 RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS
6		25
7	=over 4
8		26
		27	=head2 Meta, Features & Commandline Issues
		28
		29	=head3 My question isn't answered here, can I ask a human?
		30
		31	Before sending me mail, you could go to IRC: C<irc.freenode.net>,
		32	channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be
		33	interested in learning about new and exciting problems (but not FAQs :).
		34
		35	=head3 Does it support tabs, can I have a tabbed rxvt-unicode?
		36
		37	Beginning with version 7.3, there is a perl extension that implements a
		38	simple tabbed terminal. It is installed by default, so any of these should
		39	give you tabs:
		40
		41	@@URXVT_NAME@@ -pe tabbed
		42
		43	URxvt.perl-ext-common: default,tabbed
		44
		45	It will also work fine with tabbing functionality of many window managers
		46	or similar tabbing programs, and its embedding-features allow it to be
		47	embedded into other programs, as witnessed by F<doc/rxvt-tabbed> or
		48	the upcoming C<Gtk2::URxvt> perl module, which features a tabbed urxvt
		49	(murxvt) terminal as an example embedding application.
		50
9	=item How do I know which rxvt-unicode version I'm using?	51	=head3 How do I know which rxvt-unicode version I'm using?
10		52
11	The version number is displayed with the usage (-h). Also the escape	53	The version number is displayed with the usage (-h). Also the escape
12	sequence C<ESC[8n> sets the window title to the version number.	54	sequence C<ESC [ 8 n> sets the window title to the version number. When
		55	using the @@URXVT_NAME@@c client, the version displayed is that of the
		56	daemon.
13		57
14	=item When I log-in to another system it tells me about missing terminfo data?
15
16	The terminal description used by rxvt-unicode is not as widely available
17	as that for xterm, or even rxvt (for which the same problem often arises).
18
19	The correct solution for this problem is to install the terminfo, this can
20	be done like this (with ncurses' infocmp):
21
22	REMOTE=remotesystem.domain
23	infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
24
25	... or by installing rxvt-unicode normally on the remote system,
26
27	If you cannot or do not want to do this, then you can simply set
28	C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
29	problems arising, which includes wrong keymapping, less and different
30	colours and some refresh errors in fullscreen applications. It's a nice
31	quick-and-dirty workaround for rare cases, though.
32
33	If you always want to do this you can either recompile rxvt-unicode with
34	the desired TERM value or use a resource to set it:
35
36	URxvt.termName: rxvt
37
38	If you don't plan to use B<rxvt> (quite common...) you could also replace
39	the rxvt terminfo file with the rxvt-unicode one.
40
41	=item I need a termcap file entry.
42
43	You could use rxvt's termcap entry with resonable results in many cases.
44	You can also create a termcap entry by using terminfo's infocmp program
45	like this:
46
47	infocmp -C rxvt-unicode
48
49	OR you could this termcap entry:
50
51	rxvt-unicode|rxvt-unicode terminal (X Window System):\
52	:am:bw:eo:km:mi:ms:xn:xo:\
53	:co#80:it#8:li#24:\
54	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
55	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
56	:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\
57	:as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\
58	:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\
59	:ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\
60	:im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
61	:k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\
62	:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\
63	:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\
64	:ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\
65	:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\
66	:nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\
67	:st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\
68	:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
69	:vs=\E[?25h:
70
71	=item How can I configure rxvt-unicode so that it looks similar to the original rxvt?
72
73	Felix von Leitner says that these two lines, in your F<.Xdefaults>, will make rxvt-unicode
74	behave similar to the original rxvt:
75
76	URxvt.font: -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1
77	URxvt.boldFont: -misc-fixed-bold-r-semicondensed--13-120-75-75-c-60-iso8859-1
78
79	=item Rxvt-unicode does not seem to understand the selected encoding?
80
81	=item Unicode does not seem to work?
82
83	If you encounter strange problems like typing an accented character but
84	getting two unrelated other characters or similar, or if program output is
85	subtly garbled, then you should check your locale settings.
86
87	Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
88	programs. Often rxvt-unicode is started in the C<C> locale, while the
89	login script running within the rxvt-unicode window changes the locale to
90	sth. else, e.h. C<en_GB.UTF-8>. Needless to say, this is not going to work.
91
92	The best thing is to fix your startup environment, as you will likely run
93	into other problems. If nothing works you can try this in your .profile.
94
95	printf '\e]701;%s\007' "$LC_CTYPE"
96
97	If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
98	supported on your systems. Some systems have a C<locale> command which
99	displays this. If it displays sth. like:
100
101	locale: Cannot set LC_CTYPE to default locale: ...
102
103	Then the locale you specified is not supported on your system.
104
105	If nothing works and you are sure that everything is set correctly then
106	you will need to remember a little known fact: Some programs just don't
107	support locales :(
108
109	=item Why do some characters look so much different than others?
110
111	=item How does rxvt-unicode choose fonts?
112
113	Most fonts do not contain the full range of Unicode, which is
114	fine. Chances are that the font you (or the admin/package maintainer of
115	your system/os) have specified does not cover all the characters you want
116	to display.
117
118	B<rxvt-unicode> makes a best-effort try at finding a replacement
119	font. Often the result is fine, but sometimes the chosen font looks
120	bad. Many fonts have totally strange characters that don't resemble the
121	correct glyph at all, and rxvt-unicode lacks the artificial intelligence
122	to detect that a specific glyph is wrong: it has to believe the font that
123	the characters it contains indeed look correct.
124
125	In that case, select a font of your taste and add it to the font list,
126	e.g.:
127
128	@@RXVT_NAME@@ -fn basefont,font2,font3...
129
130	When rxvt-unicode sees a character, it will first look at the base
131	font. If the base font does not contain the character, it will go to the
132	next font, and so on. Specifying your own fonts will also speed up this
133	search and use less resources within rxvt-unicode and the X-server.
134
135	The only limitation is that all the fonts must not be larger than the base
136	font, as the base font defines the principal cell size, which must be the
137	same due to the way terminals work.
138
139	=item Why do some chinese characters look so different than others?
140
141	This is because there is a difference between script and language --
142	rxvt-unicode does not know which language the text that is output
143	is, as it only knows the unicode character codes. If rxvt-unicode
144	first sees a japanese character, it might choose a japanese font for
145	it. Subsequent japanese characters will take that font. Now, many chinese
146	characters aren't represented in japanese fonts, so when the first
147	non-japanese character comes up, rxvt-unicode will look for a chinese font
148	-- unfortunately at this point, it will still use the japanese font for
149	japanese characters that are also chinese.
150
151	The workaround is easy: just tag a chinese font at the end of your font
152	list (see the previous question). The key is to view the font list as
153	a preference list: If you expect more japanese, list a japanese font
154	first. If you expect more chinese, put a chinese font first.
155
156	In the future it might be possible to switch preferences at runtime (the
157	internal data structure has no problem with using different fonts for
158	the same character at the same time, but no interface for this has been
159	designed yet).
160
161	=item Why does rxvt-unicode sometimes leave pixel droppings?
162
163	Most fonts were not designed for terminal use, which means that character
164	size varies a lot. A font that is otherwise fine for terminal use might
165	contain some characters that are simply too wide. Rxvt-unicode will avoid
166	these characters. For characters that are just "a bit" too wide a special
167	"careful" rendering mode is used that redraws adjacent characters.
168
169	All of this requires that fonts do not lie about character sizes,
170	however: Xft fonts often draw glyphs larger than their acclaimed bounding
171	box, and rxvt-unicode has no way of detecting this (the correct way is to
172	ask for the character bounding box, which unfortunately is wrong in these
173	cases).
174
175	It's not clear (to me at least), wether this is a bug in Xft, freetype, or
176	the respective font. If you encounter this problem there is no way to work
177	around this except by using a different font.
178
179	All of this is not a problem when using X11 core fonts, as their bounding
180	box data is correct.
181
182	=item My Compose (Multi_key) key is no longer working.
183
184	The most common causes for this are that either your locale is not set
185	correctly, or you specified a B<preeditStyle> that is not supported by
186	your input method. For example, if you specified B<OverTheSpot> and
187	your input method (e.g. the default input method handling Compose keys)
188	does not support this (for instance because it is not visual), then
189	rxvt-unicode will continue without an input method.
190
191	In this case either do not specify a B<preeditStyle> or specify more than
192	one pre-edit style, such as B<OverTheSpot,Root,None>.
193
194	=item I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755
195
196	Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on
197	international keyboards) or simply use ISO 14755 support to your
198	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other
199	codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape
200	character and so on.
201
202	=item How can I keep rxvt-unicode from using reverse video so much?
203
204	First of all, make sure you are running with the right terminfo
205	(C<urxvt>), which will get rid of most of these effects. Then make sure
206	you have specified colours for italic and bold, as otherwise rxvt-unicode
207	might use reverse video to simulate the effect:
208
209	URxvt*colorBD: white
210	URxvt*colorIT: green
211
212	=item Some programs assume totally weird colours (red instead of blue), how can I fix that?
213
214	For some unexplainable reason, some programs (i.e. irssi) assume a very
215	weird colour palette when confronted with a terminal with more than the
216	standard 8 colours (rxvt-unicode supports 88). The right fix is, of
217	course, to fix these programs not to assume non-ISO colours without very
218	good reasons.
219
220	In the meantime, you can either edit your C<urxvt> terminfo definition to
221	only claim 8 colour support or use C<TERM=rxvt>, which will fix colours
222	but keep you from using other rxvt-unicode features.
223
224	=item I am on FreeBSD and rxvt-unicode does not seem to work at all.
225
226	Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
227	in your compile environment, or an implementation that implements it,
228	wether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
229	B<wchar_t> is represented as unicode.
230
231	As you might have guessed, FreeBSD does neither define this symobl nor
232	does it support it. Instead, it uses it's own internal representation of
233	B<wchar_t>. This is, of course, completely legal.
234
235	However, C<__STDC_ISO_10646__> is the only sane way to support
236	multi-language apps in an OS, as using a locale-dependent (and
237	non-standardized) representation of B<wchar_t> makes it impossible to
238	convert between B<wchar_t> (as used by X11 and your applications) and any
239	other encoding without implementing OS-specific-wrappers for each and
240	every locale. There simply are no APIs to convert B<wchar_t> into anything
241	except the current locale encoding.
242
243	Some applications (such as the formidable B<mlterm>) work around this
244	by carrying their own replacement functions for character set handling
245	with them, and either implementing OS-dependent hacks or doing multiple
246	conversions (which is slow and unreliable in case the OS implements
247	encodings slightly different than the terminal emulator).
248
249	The rxvt-unicode author insists that the right way to fix this is in the
250	system libraries once and for all, instead of forcing every app to carry
251	complete replacements.
252
253	=item How does rxvt-unicode determine the encoding to use?
254
255	=item Is there an option to switch encodings?
256
257	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
258	specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
259	UTF-8 or any other encodings with respect to terminal I/O.
260
261	The reasons is that there exists a perfectly fine mechanism for selecting
262	the encoding, doing I/O and (most important) communicating this to all
263	applications so everybody agrees on character properties such as width and
264	code number. This mechanism is the I<locale>.
265
266	Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
267	programs doing the same (that is, most) will automatically agree in the
268	interpretation of characters.
269
270	Unfortunately, there is no system-independent way to select locales, nor
271	is there a standard on how locale specifiers will look like.
272
273	On most systems, the content of the C<LC_CTYPE> environment variable
274	contains an arbitrary string which corresponds to an already-installed
275	locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
276	C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
277	(i.e. C<de> or C<german>) are also common.
278
279	Rxvt-unicode ignores all other locale categories, and except for
280	the encoding, ignores country or language-specific settings,
281	i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the same for rxvt-unicode.
282
283	If you want to use a specific encoding you have to make sure you start
284	rxvt-unicode with the correct C<LC_CTYPE> category.
285
286	=item Can I switch locales at runtime?
287
288	Yes, using an escape sequence. Try sth. like this, which sets
289	rxvt-unicode's idea of C<LC_CTYPE>.
290
291	printf '\e]701;%s\007' ja_JP.SJIS
292
293	See also the previous question.
294
295	Sometimes this capability is rather handy when you want to work in one
296	locale (e.g. C<de_DE.UTF-8>) but some programs don't support UTF-8. For
297	example, I use this script to start C<xjdic>, which first switches to a
298	locale supported by xjdic and back later:
299
300	printf '\e]701;%s\007' ja_JP.SJIS
301	xjdic -js
302	printf '\e]701;%s\007' de_DE.UTF-8
303
304	=item Can I switch the fonts at runtime?
305
306	Yes, using an escape sequence. Try sth. like this, which has the same
307	effect as using the C<-fn> switch, and takes effect immediately:
308
309	printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"
310
311	This is useful if you e.g. work primarily with japanese (and prefer a
312	japanese font), but you have to switch to chinese temporarily, where
313	japanese fonts would only be in your way.
314
315	You can think of this as a kind of manual ISO-2022 switching.
316
317	=item Why do italic characters look as if clipped?
318
319	Many fonts have difficulties with italic characters and hinting. For
320	example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
321	Mono> completely fails in it's italic face. A workaround is to enable
322	freetype autohinting, i.e. like this:
323
324	URxvt*italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
325	URxvt*boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
326
327	=item My input method wants <some encoding> but I want UTF-8, what can I do?
328
329	You can specify separate locales for the input method and the rest of the
330	terminal, using the resource C<imlocale>:
331
332	URxvt*imlocale: ja_JP.EUC-JP
333
334	Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
335	use your input method. Please note, however, that you will not be able to
336	input characters outside C<EUC-JP> in a normal way then, as your input
337	method limits you.
338
339	=item Rxvt-unicode uses gobs of memory, how can I reduce that?	58	=head3 Rxvt-unicode uses gobs of memory, how can I reduce that?
340		59
341	Rxvt-unicode tries to obey the rule of not charging you for sth. you	60	Rxvt-unicode tries to obey the rule of not charging you for something you
342	don't use. One thing you should try is to configure out all settings that	61	don't use. One thing you should try is to configure out all settings that
343	you don't need, for example, Xft support is a resource hog by design,	62	you don't need, for example, Xft support is a resource hog by design,
344	when used. Compiling it out ensures that no Xft font will be loaded	63	when used. Compiling it out ensures that no Xft font will be loaded
345	accidentally when rxvt-unicode tries to find a font for your characters.	64	accidentally when rxvt-unicode tries to find a font for your characters.
346		65
…		…
349	6 bytes per screen cell. For a 160x?? window this amounts to almost a	68	6 bytes per screen cell. For a 160x?? window this amounts to almost a
350	kilobyte per line. A scrollback buffer of 10000 lines will then (if full)	69	kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
351	use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as	70	use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
352	rxvt-unicode then uses 8 bytes per screen cell.	71	rxvt-unicode then uses 8 bytes per screen cell.
353		72
		73	=head3 How can I start @@URXVT_NAME@@d in a race-free way?
		74
		75	Try C<@@URXVT_NAME@@d -f -o>, which tells @@URXVT_NAME@@d to open the
		76	display, create the listening socket and then fork.
		77
		78	=head3 How can I start @@URXVT_NAME@@d automatically when I run @@URXVT_NAME@@c?
		79
		80	If you want to start @@URXVT_NAME@@d automatically whenever you run
		81	@@URXVT_NAME@@c and the daemon isn't running yet, use this script:
		82
		83	#!/bin/sh
		84	@@URXVT_NAME@@c "$@"
		85	if [ $? -eq 2 ]; then
		86	@@URXVT_NAME@@d -q -o -f
		87	@@URXVT_NAME@@c "$@"
		88	fi
		89
		90	This tries to create a new terminal, and if fails with exit status 2,
		91	meaning it couldn't connect to the daemon, it will start the daemon and
		92	re-run the command. Subsequent invocations of the script will re-use the
		93	existing daemon.
		94
		95	=head3 How do I distinguish whether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.
		96
		97	The original rxvt and rxvt-unicode always export the variable "COLORTERM",
		98	so you can check and see if that is set. Note that several programs, JED,
		99	slrn, Midnight Commander automatically check this variable to decide
		100	whether or not to use color.
		101
		102	=head3 How do I set the correct, full IP address for the DISPLAY variable?
		103
		104	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
		105	insecure mode then it is possible to use the following shell script
		106	snippets to correctly set the display. If your version of rxvt-unicode
		107	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
		108	the COLORTERM variable can be used to distinguish rxvt-unicode from a
		109	regular xterm.
		110
		111	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
		112	snippets:
		113
		114	# Bourne/Korn/POSIX family of shells:
		115	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
		116	if [ ${TERM:-foo} = xterm ]; then
		117	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
		118	echo -n '^[Z'
		119	read term_id
		120	stty icanon echo
		121	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
		122	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
		123	read DISPLAY # set it in our local shell
		124	fi
		125	fi
		126
		127	=head3 How do I compile the manual pages on my own?
		128
		129	You need to have a recent version of perl installed as F</usr/bin/perl>,
		130	one that comes with F<pod2man>, F<pod2text> and F<pod2xhtml> (from
		131	F<Pod::Xhtml>). Then go to the doc subdirectory and enter C<make alldoc>.
		132
		133	=head3 Isn't rxvt-unicode supposed to be small? Don't all those features bloat?
		134
		135	I often get asked about this, and I think, no, they didn't cause extra
		136	bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
		137	that the urxvt binary is larger (due to some encoding tables always being
		138	compiled in), but it actually uses less memory (RSS) after startup. Even
		139	with C<--disable-everything>, this comparison is a bit unfair, as many
		140	features unique to urxvt (locale, encoding conversion, iso14755 etc.) are
		141	already in use in this mode.
		142
		143	text data bss drs rss filename
		144	98398 1664 24 15695 1824 rxvt --disable-everything
		145	188985 9048 66616 18222 1788 urxvt --disable-everything
		146
		147	When you C<--enable-everything> (which I<is> unfair, as this involves xft
		148	and full locale/XIM support which are quite bloaty inside libX11 and my
		149	libc), the two diverge, but not unreasonably so.
		150
		151	text data bss drs rss filename
		152	163431 2152 24 20123 2060 rxvt --enable-everything
		153	1035683 49680 66648 29096 3680 urxvt --enable-everything
		154
		155	The very large size of the text section is explained by the east-asian
		156	encoding tables, which, if unused, take up disk space but nothing else
		157	and can be compiled out unless you rely on X11 core fonts that use those
		158	encodings. The BSS size comes from the 64k emergency buffer that my c++
		159	compiler allocates (but of course doesn't use unless you are out of
		160	memory). Also, using an xft font instead of a core font immediately adds a
		161	few megabytes of RSS. Xft indeed is responsible for a lot of RSS even when
		162	not used.
		163
		164	Of course, due to every character using two or four bytes instead of one,
		165	a large scrollback buffer will ultimately make rxvt-unicode use more
		166	memory.
		167
		168	Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), this
		169	still fares rather well. And compared to some monsters like gnome-terminal
		170	(21152k + extra 4204k in separate processes) or konsole (22200k + extra
		171	43180k in daemons that stay around after exit, plus half a minute of
		172	startup time, including the hundreds of warnings it spits out), it fares
		173	extremely well *g*.
		174
		175	=head3 Why C++, isn't that unportable/bloated/uncool?
		176
		177	Is this a question? :) It comes up very often. The simple answer is: I had
		178	to write it, and C++ allowed me to write and maintain it in a fraction
		179	of the time and effort (which is a scarce resource for me). Put even
		180	shorter: It simply wouldn't exist without C++.
		181
		182	My personal stance on this is that C++ is less portable than C, but in
		183	the case of rxvt-unicode this hardly matters, as its portability limits
		184	are defined by things like X11, pseudo terminals, locale support and unix
		185	domain sockets, which are all less portable than C++ itself.
		186
		187	Regarding the bloat, see the above question: It's easy to write programs
		188	in C that use gobs of memory, an certainly possible to write programs in
		189	C++ that don't. C++ also often comes with large libraries, but this is
		190	not necessarily the case with GCC. Here is what rxvt links against on my
		191	system with a minimal config:
		192
		193	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
		194	libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000)
		195	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000)
		196	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
		197
		198	And here is rxvt-unicode:
		199
		200	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
		201	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
		202	libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
		203	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
		204	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
		205
		206	No large bloated libraries (of course, none were linked in statically),
		207	except maybe libX11 :)
		208
		209
		210	=head2 Rendering, Font & Look and Feel Issues
		211
		212	=head3 I can't get transparency working, what am I doing wrong?
		213
		214	First of all, transparency isn't officially supported in rxvt-unicode, so
		215	you are mostly on your own. Do not bug the author about it (but you may
		216	bug everybody else). Also, if you can't get it working consider it a rite
		217	of passage: ... and you failed.
		218
		219	Here are four ways to get transparency. B<Do> read the manpage and option
		220	descriptions for the programs mentioned and rxvt-unicode. Really, do it!
		221
		222	1. Use inheritPixmap:
		223
		224	Esetroot wallpaper.jpg
		225	@@URXVT_NAME@@ -ip -tint red -sh 40
		226
		227	That works. If you think it doesn't, you lack transparency and tinting
		228	support, or you are unable to read.
		229
		230	2. Use a simple pixmap and emulate pseudo-transparency. This enables you
		231	to use effects other than tinting and shading: Just shade/tint/whatever
		232	your picture with gimp or any other tool:
		233
		234	convert wallpaper.jpg -blur 20x20 -modulate 30 background.xpm
		235	@@URXVT_NAME@@ -pixmap background.xpm -pe automove-background
		236
		237	That works. If you think it doesn't, you lack XPM and Perl support, or you
		238	are unable to read.
		239
		240	3. Use an ARGB visual:
		241
		242	@@URXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
		243
		244	This requires XFT support, and the support of your X-server. If that
		245	doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
		246	there yet, no matter what they claim. Rxvt-Unicode contains the necessary
		247	bugfixes and workarounds for Xft and Xlib to make it work, but that
		248	doesn't mean that your WM has the required kludges in place.
		249
		250	4. Use xcompmgr and let it do the job:
		251
		252	xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \
		253	-set _NET_WM_WINDOW_OPACITY 0xc0000000
		254
		255	Then click on a window you want to make transparent. Replace C<0xc0000000>
		256	by other values to change the degree of opacity. If it doesn't work and
		257	your server crashes, you got to keep the pieces.
		258
		259	=head3 Why does rxvt-unicode sometimes leave pixel droppings?
		260
		261	Most fonts were not designed for terminal use, which means that character
		262	size varies a lot. A font that is otherwise fine for terminal use might
		263	contain some characters that are simply too wide. Rxvt-unicode will avoid
		264	these characters. For characters that are just "a bit" too wide a special
		265	"careful" rendering mode is used that redraws adjacent characters.
		266
		267	All of this requires that fonts do not lie about character sizes,
		268	however: Xft fonts often draw glyphs larger than their acclaimed bounding
		269	box, and rxvt-unicode has no way of detecting this (the correct way is to
		270	ask for the character bounding box, which unfortunately is wrong in these
		271	cases).
		272
		273	It's not clear (to me at least), whether this is a bug in Xft, freetype,
		274	or the respective font. If you encounter this problem you might try using
		275	the C<-lsp> option to give the font more height. If that doesn't work, you
		276	might be forced to use a different font.
		277
		278	All of this is not a problem when using X11 core fonts, as their bounding
		279	box data is correct.
		280
		281	=head3 How can I keep rxvt-unicode from using reverse video so much?
		282
		283	First of all, make sure you are running with the right terminal settings
		284	(C<TERM=rxvt-unicode>), which will get rid of most of these effects. Then
		285	make sure you have specified colours for italic and bold, as otherwise
		286	rxvt-unicode might use reverse video to simulate the effect:
		287
		288	URxvt.colorBD: white
		289	URxvt.colorIT: green
		290
		291	=head3 Some programs assume totally weird colours (red instead of blue), how can I fix that?
		292
		293	For some unexplainable reason, some rare programs assume a very weird
		294	colour palette when confronted with a terminal with more than the standard
		295	8 colours (rxvt-unicode supports 88). The right fix is, of course, to fix
		296	these programs not to assume non-ISO colours without very good reasons.
		297
		298	In the meantime, you can either edit your C<rxvt-unicode> terminfo
		299	definition to only claim 8 colour support or use C<TERM=rxvt>, which will
		300	fix colours but keep you from using other rxvt-unicode features.
		301
		302	=head3 Can I switch the fonts at runtime?
		303
		304	Yes, using an escape sequence. Try something like this, which has the same
		305	effect as using the C<-fn> switch, and takes effect immediately:
		306
		307	printf '\33]50;%s\007' "9x15bold,xft:Kochi Gothic"
		308
		309	This is useful if you e.g. work primarily with japanese (and prefer a
		310	japanese font), but you have to switch to chinese temporarily, where
		311	japanese fonts would only be in your way.
		312
		313	You can think of this as a kind of manual ISO-2022 switching.
		314
		315	=head3 Why do italic characters look as if clipped?
		316
		317	Many fonts have difficulties with italic characters and hinting. For
		318	example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
		319	Mono> completely fails in its italic face. A workaround might be to
		320	enable freetype autohinting, i.e. like this:
		321
		322	URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
		323	URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
		324
354	=item Can I speed up Xft rendering somehow?	325	=head3 Can I speed up Xft rendering somehow?
355		326
356	Yes, the most obvious way to speed it up is to avoid Xft entirely, as	327	Yes, the most obvious way to speed it up is to avoid Xft entirely, as
357	it is simply slow. If you still want Xft fonts you might try to disable	328	it is simply slow. If you still want Xft fonts you might try to disable
358	antialiasing (by appending C<:antialiasing=false>), which saves lots of	329	antialiasing (by appending C<:antialias=false>), which saves lots of
359	memory and also speeds up rendering considerably.	330	memory and also speeds up rendering considerably.
360		331
361	=item Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?	332	=head3 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
362		333
363	Rxvt-unicode will use whatever you specify as a font. If it needs to	334	Rxvt-unicode will use whatever you specify as a font. If it needs to
364	fall back to it's default font search list it will prefer X11 core	335	fall back to its default font search list it will prefer X11 core
365	fonts, because they are small and fast, and then use Xft fonts. It has	336	fonts, because they are small and fast, and then use Xft fonts. It has
366	antialiasing disabled for most of them, because the author thinks they	337	antialiasing disabled for most of them, because the author thinks they
367	look best that way.	338	look best that way.
368		339
369	If you want antialiasing, you have to specify the fonts manually.	340	If you want antialiasing, you have to specify the fonts manually.
370		341
371	=item Mouse cut/paste suddenly no longer works.
372
373	Make sure that mouse reporting is actually turned off since killing
374	some editors prematurely may leave the mouse in mouse report mode. I've
375	heard that tcsh may use mouse reporting unless it otherwise specified. A
376	quick check is to see if cut/paste works when the Alt or Shift keys are
377	depressed. See @@RXVT_NAME@@(7)
378
379	=item What's with this bold/blink stuff?	342	=head3 What's with this bold/blink stuff?
380		343
381	If no bold colour is set via C<colorBD:>, bold will invert text using the	344	If no bold colour is set via C<colorBD:>, bold will invert text using the
382	standard foreground colour.	345	standard foreground colour.
383		346
384	For the standard background colour, blinking will actually make the	347	For the standard background colour, blinking will actually make the
…		…
391		354
392	color0-7 are the low-intensity colors.	355	color0-7 are the low-intensity colors.
393		356
394	color8-15 are the corresponding high-intensity colors.	357	color8-15 are the corresponding high-intensity colors.
395		358
396	=item I don't like the screen colors. How do I change them?	359	=head3 I don't like the screen colors. How do I change them?
397		360
398	You can change the screen colors at run-time using F<~/.Xdefaults>	361	You can change the screen colors at run-time using F<~/.Xdefaults>
399	resources (or as long-options).	362	resources (or as long-options).
400		363
401	Here are values that are supposed to resemble a VGA screen,	364	Here are values that are supposed to resemble a VGA screen,
402	including the murky brown that passes for low-intensity yellow:	365	including the murky brown that passes for low-intensity yellow:
403		366
404	URxvt*color0: #000000	367	URxvt.color0: #000000
405	URxvt*color1: #A80000	368	URxvt.color1: #A80000
406	URxvt*color2: #00A800	369	URxvt.color2: #00A800
407	URxvt*color3: #A8A800	370	URxvt.color3: #A8A800
408	URxvt*color4: #0000A8	371	URxvt.color4: #0000A8
409	URxvt*color5: #A800A8	372	URxvt.color5: #A800A8
410	URxvt*color6: #00A8A8	373	URxvt.color6: #00A8A8
411	URxvt*color7: #A8A8A8	374	URxvt.color7: #A8A8A8
412		375
413	URxvt*color8: #000054	376	URxvt.color8: #000054
414	URxvt*color9: #FF0054	377	URxvt.color9: #FF0054
415	URxvt*color10: #00FF54	378	URxvt.color10: #00FF54
416	URxvt*color11: #FFFF54	379	URxvt.color11: #FFFF54
417	URxvt*color12: #0000FF	380	URxvt.color12: #0000FF
418	URxvt*color13: #FF00FF	381	URxvt.color13: #FF00FF
419	URxvt*color14: #00FFFF	382	URxvt.color14: #00FFFF
420	URxvt*color15: #FFFFFF	383	URxvt.color15: #FFFFFF
421		384
422	And here is a more complete set of non-standard colors described as	385	And here is a more complete set of non-standard colors.
423	"pretty girly":
424		386
425	URxvt.cursorColor: #dc74d1	387	URxvt.cursorColor: #dc74d1
426	URxvt.pointerColor: #dc74d1	388	URxvt.pointerColor: #dc74d1
427	URxvt.background: #0e0e0e	389	URxvt.background: #0e0e0e
428	URxvt.foreground: #4ad5e1	390	URxvt.foreground: #4ad5e1
…		…
439	URxvt.color6: #73f7ff	401	URxvt.color6: #73f7ff
440	URxvt.color14: #73f7ff	402	URxvt.color14: #73f7ff
441	URxvt.color7: #e1dddd	403	URxvt.color7: #e1dddd
442	URxvt.color15: #e1dddd	404	URxvt.color15: #e1dddd
443		405
		406	They have been described (not by me) as "pretty girly".
		407
		408	=head3 Why do some characters look so much different than others?
		409
		410	See next entry.
		411
		412	=head3 How does rxvt-unicode choose fonts?
		413
		414	Most fonts do not contain the full range of Unicode, which is
		415	fine. Chances are that the font you (or the admin/package maintainer of
		416	your system/os) have specified does not cover all the characters you want
		417	to display.
		418
		419	B<rxvt-unicode> makes a best-effort try at finding a replacement
		420	font. Often the result is fine, but sometimes the chosen font looks
		421	bad/ugly/wrong. Some fonts have totally strange characters that don't
		422	resemble the correct glyph at all, and rxvt-unicode lacks the artificial
		423	intelligence to detect that a specific glyph is wrong: it has to believe
		424	the font that the characters it claims to contain indeed look correct.
		425
		426	In that case, select a font of your taste and add it to the font list,
		427	e.g.:
		428
		429	@@URXVT_NAME@@ -fn basefont,font2,font3...
		430
		431	When rxvt-unicode sees a character, it will first look at the base
		432	font. If the base font does not contain the character, it will go to the
		433	next font, and so on. Specifying your own fonts will also speed up this
		434	search and use less resources within rxvt-unicode and the X-server.
		435
		436	The only limitation is that none of the fonts may be larger than the base
		437	font, as the base font defines the terminal character cell size, which
		438	must be the same due to the way terminals work.
		439
		440	=head3 Why do some chinese characters look so different than others?
		441
		442	This is because there is a difference between script and language --
		443	rxvt-unicode does not know which language the text that is output is,
		444	as it only knows the unicode character codes. If rxvt-unicode first
		445	sees a japanese/chinese character, it might choose a japanese font for
		446	display. Subsequent japanese characters will use that font. Now, many
		447	chinese characters aren't represented in japanese fonts, so when the first
		448	non-japanese character comes up, rxvt-unicode will look for a chinese font
		449	-- unfortunately at this point, it will still use the japanese font for
		450	chinese characters that are also in the japanese font.
		451
		452	The workaround is easy: just tag a chinese font at the end of your font
		453	list (see the previous question). The key is to view the font list as
		454	a preference list: If you expect more japanese, list a japanese font
		455	first. If you expect more chinese, put a chinese font first.
		456
		457	In the future it might be possible to switch language preferences at
		458	runtime (the internal data structure has no problem with using different
		459	fonts for the same character at the same time, but no interface for this
		460	has been designed yet).
		461
		462	Until then, you might get away with switching fonts at runtime (see L<Can
		463	I switch the fonts at runtime?> later in this document).
		464
		465	=head2 Keyboard, Mouse & User Interaction
		466
		467	=head3 The new selection selects pieces that are too big, how can I select single words?
		468
		469	If you want to select e.g. alphanumeric words, you can use the following
		470	setting:
		471
		472	URxvt.selection.pattern-0: ([[:word:]]+)
		473
		474	If you click more than twice, the selection will be extended
		475	more and more.
		476
		477	To get a selection that is very similar to the old code, try this pattern:
		478
		479	URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
		480
		481	Please also note that the I<LeftClick Shift-LeftClik> combination also
		482	selects words like the old code.
		483
		484	=head3 I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
		485
		486	You can disable the perl extension completely by setting the
		487	B<perl-ext-common> resource to the empty string, which also keeps
		488	rxvt-unicode from initialising perl, saving memory.
		489
		490	If you only want to disable specific features, you first have to
		491	identify which perl extension is responsible. For this, read the section
		492	B<PREPACKAGED EXTENSIONS> in the @@URXVT_NAME@@perl(3) manpage. For
		493	example, to disable the B<selection-popup> and B<option-popup>, specify
		494	this B<perl-ext-common> resource:
		495
		496	URxvt.perl-ext-common: default,-selection-popup,-option-popup
		497
		498	This will keep the default extensions, but disable the two popup
		499	extensions. Some extensions can also be configured, for example,
		500	scrollback search mode is triggered by B<M-s>. You can move it to any
		501	other combination either by setting the B<searchable-scrollback> resource:
		502
		503	URxvt.searchable-scrollback: CM-s
		504
		505	=head3 The cursor moves when selecting text in the current input line, how do I switch this off?
		506
		507	See next entry.
		508
		509	=head3 During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?
		510
		511	These are caused by the C<readline> perl extension. Under normal
		512	circumstances, it will move your cursor around when you click into the
		513	line that contains it. It tries hard not to do this at the wrong moment,
		514	but when running a program that doesn't parse cursor movements or in some
		515	cases during rlogin sessions, it fails to detect this properly.
		516
		517	You can permanently switch this feature off by disabling the C<readline>
		518	extension:
		519
		520	URxvt.perl-ext-common: default,-readline
		521
		522	=head3 My numerical keypad acts weird and generates differing output?
		523
		524	Some Debian GNUL/Linux users seem to have this problem, although no
		525	specific details were reported so far. It is possible that this is caused
		526	by the wrong C<TERM> setting, although the details of whether and how
		527	this can happen are unknown, as C<TERM=rxvt> should offer a compatible
		528	keymap. See the answer to the previous question, and please report if that
		529	helped.
		530
		531	=head3 My Compose (Multi_key) key is no longer working.
		532
		533	The most common causes for this are that either your locale is not set
		534	correctly, or you specified a B<preeditStyle> that is not supported by
		535	your input method. For example, if you specified B<OverTheSpot> and
		536	your input method (e.g. the default input method handling Compose keys)
		537	does not support this (for instance because it is not visual), then
		538	rxvt-unicode will continue without an input method.
		539
		540	In this case either do not specify a B<preeditStyle> or specify more than
		541	one pre-edit style, such as B<OverTheSpot,Root,None>.
		542
		543	=head3 I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755
		544
		545	Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on
		546	international keyboards) or simply use ISO 14755 support to your
		547	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other
		548	codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape
		549	character and so on.
		550
		551	=head3 Mouse cut/paste suddenly no longer works.
		552
		553	Make sure that mouse reporting is actually turned off since killing
		554	some editors prematurely may leave the mouse in mouse report mode. I've
		555	heard that tcsh may use mouse reporting unless it otherwise specified. A
		556	quick check is to see if cut/paste works when the Alt or Shift keys are
		557	depressed.
		558
444	=item What's with the strange Backspace/Delete key behaviour?	559	=head3 What's with the strange Backspace/Delete key behaviour?
445		560
446	Assuming that the physical Backspace key corresponds to the	561	Assuming that the physical Backspace key corresponds to the
447	BackSpace keysym (not likely for Linux ... see the following	562	Backspace keysym (not likely for Linux ... see the following
448	question) there are two standard values that can be used for	563	question) there are two standard values that can be used for
449	Backspace: C<^H> and C<^?>.	564	Backspace: C<^H> and C<^?>.
450		565
451	Historically, either value is correct, but rxvt-unicode adopts the debian	566	Historically, either value is correct, but rxvt-unicode adopts the debian
452	policy of using C<^?> when unsure, because it's the one only only correct	567	policy of using C<^?> when unsure, because it's the one and only correct
453	choice :).	568	choice :).
454		569
455	Rxvt-unicode tries to inherit the current stty settings and uses the value	570	Rxvt-unicode tries to inherit the current stty settings and uses the value
456	of `erase' to guess the value for backspace. If rxvt-unicode wasn't	571	of `erase' to guess the value for backspace. If rxvt-unicode wasn't
457	started from a terminal (say, from a menu or by remote shell), then the	572	started from a terminal (say, from a menu or by remote shell), then the
…		…
460		575
461	For starting a new rxvt-unicode:	576	For starting a new rxvt-unicode:
462		577
463	# use Backspace = ^H	578	# use Backspace = ^H
464	$ stty erase ^H	579	$ stty erase ^H
465	$ @@RXVT_NAME@@	580	$ @@URXVT_NAME@@
466		581
467	# use Backspace = ^?	582	# use Backspace = ^?
468	$ stty erase ^?	583	$ stty erase ^?
469	$ @@RXVT_NAME@@	584	$ @@URXVT_NAME@@
470		585
471	Toggle with "ESC[36h" / "ESC[36l" as documented in @@RXVT_NAME@@(7).	586	Toggle with C<ESC [ 36 h> / C<ESC [ 36 l>.
472		587
473	For an existing rxvt-unicode:	588	For an existing rxvt-unicode:
474		589
475	# use Backspace = ^H	590	# use Backspace = ^H
476	$ stty erase ^H	591	$ stty erase ^H
…		…
485	properly reflects that.	600	properly reflects that.
486		601
487	The Delete key is a another casualty of the ill-defined Backspace problem.	602	The Delete key is a another casualty of the ill-defined Backspace problem.
488	To avoid confusion between the Backspace and Delete keys, the Delete	603	To avoid confusion between the Backspace and Delete keys, the Delete
489	key has been assigned an escape sequence to match the vt100 for Execute	604	key has been assigned an escape sequence to match the vt100 for Execute
490	(ESC[3~) and is in the supplied termcap/terminfo.	605	(C<ESC [ 3 ~>) and is in the supplied termcap/terminfo.
491		606
492	Some other Backspace problems:	607	Some other Backspace problems:
493		608
494	some editors use termcap/terminfo,	609	some editors use termcap/terminfo,
495	some editors (vim I'm told) expect Backspace = ^H,	610	some editors (vim I'm told) expect Backspace = ^H,
496	GNU Emacs (and Emacs-like editors) use ^H for help.	611	GNU Emacs (and Emacs-like editors) use ^H for help.
497		612
498	Perhaps someday this will all be resolved in a consistent manner.	613	Perhaps someday this will all be resolved in a consistent manner.
499		614
500	=item I don't like the key-bindings. How do I change them?	615	=head3 I don't like the key-bindings. How do I change them?
501		616
502	There are some compile-time selections available via configure. Unless	617	There are some compile-time selections available via configure. Unless
503	you have run "configure" with the C<--disable-resources> option you can	618	you have run "configure" with the C<--disable-resources> option you can
504	use the `keysym' resource to alter the keystrings associated with keysym	619	use the `keysym' resource to alter the keystrings associated with keysyms.
505	0xFF00 - 0xFFFF (function, cursor keys, etc).
506		620
507	Here's an example for a tn3270 session started using `@@RXVT_NAME@@ -name tn3270'	621	Here's an example for a URxvt session started using C<@@URXVT_NAME@@ -name URxvt>
508		622
509	!# ----- special uses ------:	623	URxvt.keysym.Home: \033[1~
510	! tn3270 login, remap function and arrow keys.	624	URxvt.keysym.End: \033[4~
511	tn3270*font: *clean-bold-*-*--15-*	625	URxvt.keysym.C-apostrophe: \033<C-'>
		626	URxvt.keysym.C-slash: \033<C-/>
		627	URxvt.keysym.C-semicolon: \033<C-;>
		628	URxvt.keysym.C-grave: \033<C-`>
		629	URxvt.keysym.C-comma: \033<C-,>
		630	URxvt.keysym.C-period: \033<C-.>
		631	URxvt.keysym.C-0x60: \033<C-`>
		632	URxvt.keysym.C-Tab: \033<C-Tab>
		633	URxvt.keysym.C-Return: \033<C-Return>
		634	URxvt.keysym.S-Return: \033<S-Return>
		635	URxvt.keysym.S-space: \033<S-Space>
		636	URxvt.keysym.M-Up: \033<M-Up>
		637	URxvt.keysym.M-Down: \033<M-Down>
		638	URxvt.keysym.M-Left: \033<M-Left>
		639	URxvt.keysym.M-Right: \033<M-Right>
		640	URxvt.keysym.M-C-0: list \033<M-C- 0123456789 >
		641	URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz >
		642	URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007
512		643
513	! keysym - used by rxvt only	644	See some more examples in the documentation for the B<keysym> resource.
514	! Delete - ^D
515	tn3270*keysym.0xFFFF: \004
516		645
517	! Home - ^A	646	=head3 I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map
518	tn3270*keysym.0xFF50: \001
519	! Left - ^B
520	tn3270*keysym.0xFF51: \002
521	! Up - ^P
522	tn3270*keysym.0xFF52: \020
523	! Right - ^F
524	tn3270*keysym.0xFF53: \006
525	! Down - ^N
526	tn3270*keysym.0xFF54: \016
527	! End - ^E
528	tn3270*keysym.0xFF57: \005
529
530	! F1 - F12
531	tn3270*keysym.0xFFBE: \e1
532	tn3270*keysym.0xFFBF: \e2
533	tn3270*keysym.0xFFC0: \e3
534	tn3270*keysym.0xFFC1: \e4
535	tn3270*keysym.0xFFC2: \e5
536	tn3270*keysym.0xFFC3: \e6
537	tn3270*keysym.0xFFC4: \e7
538	tn3270*keysym.0xFFC5: \e8
539	tn3270*keysym.0xFFC6: \e9
540	tn3270*keysym.0xFFC7: \e0
541	tn3270*keysym.0xFFC8: \e-
542	tn3270*keysym.0xFFC9: \e=
543
544	! map Prior/Next to F7/F8
545	tn3270*keysym.0xFF55: \e7
546	tn3270*keysym.0xFF56: \e8
547
548	=item I'm using keyboard model XXX that has extra Prior/Next/Insert keys.
549	How do I make use of them? For example, the Sun Keyboard type 4
550	has the following mappings that rxvt-unicode doesn't recognize.
551		647
552	KP_Insert == Insert	648	KP_Insert == Insert
553	F22 == Print	649	F22 == Print
554	F27 == Home	650	F27 == Home
555	F29 == Prior	651	F29 == Prior
556	F33 == End	652	F33 == End
557	F35 == Next	653	F35 == Next
558		654
559	Rather than have rxvt-unicode try to accommodate all the various possible keyboard	655	Rather than have rxvt-unicode try to accommodate all the various possible
560	mappings, it is better to use `xmodmap' to remap the keys as required for	656	keyboard mappings, it is better to use `xmodmap' to remap the keys as
561	your particular machine.	657	required for your particular machine.
562		658
563	=item How do I distinguish if I'm running rxvt-unicode or a regular xterm?
564	I need this to decide about setting colors etc.
565		659
566	rxvt and rxvt-unicode always export the variable "COLORTERM", so you can
567	check and see if that is set. Note that several programs, JED, slrn,
568	Midnight Commander automatically check this variable to decide whether or
569	not to use color.
570		660
571	=item How do I set the correct, full IP address for the DISPLAY variable?	661	=head2 Terminal Configuration
572		662
573	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled	663	=head3 Can I see a typical configuration?
574	insecure mode then it is possible to use the following shell script
575	snippets to correctly set the display. If your version of rxvt-unicode
576	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
577	the COLORTERM variable can be used to distinguish rxvt-unicode from a
578	regular xterm.
579		664
580	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script	665	The default configuration tries to be xterm-like, which I don't like that
581	snippets:	666	much, but it's least surprise to regular users.
582		667
583	# Bourne/Korn/POSIX family of shells:	668	As a rxvt or rxvt-unicode user, you are practically supposed to invest
584	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know	669	time into customising your terminal. To get you started, here is the
585	if [ ${TERM:-foo} = xterm ]; then	670	author's .Xdefaults entries, with comments on what they do. It's certainly
586	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not	671	not I<typical>, but what's typical...
587	echo -n '^[Z'
588	read term_id
589	stty icanon echo
590	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
591	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
592	read DISPLAY # set it in our local shell
593	fi
594	fi
595		672
596	=item How do I compile the manual pages for myself?	673	URxvt.cutchars: "()*,<>[]{}|'
		674	URxvt.print-pipe: cat >/tmp/xxx
597		675
598	You need to have a recent version of perl installed as F</usr/bin/perl>,	676	These are just for testing stuff.
599	one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to
600	the doc subdirectory and enter C<make alldoc>.
601		677
602	=item My question isn't answered here, can I ask a human?	678	URxvt.imLocale: ja_JP.UTF-8
		679	URxvt.preeditType: OnTheSpot,None
603		680
604	Before sending me mail, you could go to IRC: C<irc.freenode.net>,	681	This tells rxvt-unicode to use a special locale when communicating with
605	channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be	682	the X Input Method, and also tells it to only use the OnTheSpot pre-edit
606	interested in learning about new and exciting problems (but not FAQs :).	683	type, which requires the C<xim-onthespot> perl extension but rewards me
		684	with correct-looking fonts.
		685
		686	URxvt.perl-lib: /root/lib/urxvt
		687	URxvt.perl-ext-common: default,selection-autotransform,selection-pastebin,xim-onthespot,remote-clipboard
		688	URxvt.selection.pattern-0: ( at .*? line \\d+)
		689	URxvt.selection.pattern-1: ^(/[^:]+):\
		690	URxvt.selection-autotransform.0: s/^([^:[:space:]]+):(\\d+):?$/:e \\Q$1\\E\\x0d:$2\\x0d/
		691	URxvt.selection-autotransform.1: s/^ at (.*?) line (\\d+)$/:e \\Q$1\\E\\x0d:$2\\x0d/
		692
		693	This is my perl configuration. The first two set the perl library
		694	directory and also tells urxvt to use a large number of extensions. I
		695	develop for myself mostly, so I actually use most of the extensions I
		696	write.
		697
		698	The selection stuff mainly makes the selection perl-error-message aware
		699	and tells it to convert perl error messages into vi-commands to load the
		700	relevant file and go tot he error line number.
		701
		702	URxvt.scrollstyle: plain
		703	URxvt.secondaryScroll: true
		704
		705	As the documentation says: plain is the preferred scrollbar for the
		706	author. The C<secondaryScroll> configures urxvt to scroll in full-screen
		707	apps, like screen, so lines scrolled out of screen end up in urxvt's
		708	scrollback buffer.
		709
		710	URxvt.background: #000000
		711	URxvt.foreground: gray90
		712	URxvt.color7: gray90
		713	URxvt.colorBD: #ffffff
		714	URxvt.cursorColor: #e0e080
		715	URxvt.throughColor: #8080f0
		716	URxvt.highlightColor: #f0f0f0
		717
		718	Some colours. Not sure which ones are being used or even non-defaults, but
		719	these are in my .Xdefaults. Most notably, they set foreground/background
		720	to light gray/black, and also make sure that the colour 7 matches the
		721	default foreground colour.
		722
		723	URxvt.underlineColor: yellow
		724
		725	Another colour, makes underline lines look different. Sometimes hurts, but
		726	is mostly a nice effect.
		727
		728	URxvt.geometry: 154x36
		729	URxvt.loginShell: false
		730	URxvt.meta: ignore
		731	URxvt.utmpInhibit: true
		732
		733	Uh, well, should be mostly self-explanatory. By specifying some defaults
		734	manually, I can quickly switch them for testing.
		735
		736	URxvt.saveLines: 8192
		737
		738	A large scrollback buffer is essential. Really.
		739
		740	URxvt.mapAlert: true
		741
		742	The only case I use it is for my IRC window, which I like to keep
		743	iconified till people msg me (which beeps).
		744
		745	URxvt.visualBell: true
		746
		747	The audible bell is often annoying, especially when in a crowd.
		748
		749	URxvt.insecure: true
		750
		751	Please don't hack my mutt! Ooops...
		752
		753	URxvt.pastableTabs: false
		754
		755	I once thought this is a great idea.
		756
		757	urxvt.font: 9x15bold,\
		758	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
		759	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
		760	[codeset=JISX0208]xft:Kochi Gothic, \
		761	xft:Bitstream Vera Sans Mono:autohint=true, \
		762	xft:Code2000:antialias=false
		763	urxvt.boldFont: -xos4-terminus-bold-r-normal--14-140-72-72-c-80-iso8859-15
		764	urxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
		765	urxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
		766
		767	I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
		768	overwhelmed. A special note: the C<9x15bold> mentioned above is actually
		769	the version from XFree-3.3, as XFree-4 replaced it by a totally different
		770	font (different glyphs for C<;> and many other harmless characters),
		771	while the second font is actually the C<9x15bold> from XFree4/XOrg. The
		772	bold version has less chars than the medium version, so I use it for rare
		773	characters, too. When editing sources with vim, I use italic for comments
		774	and other stuff, which looks quite good with Bitstream Vera anti-aliased.
		775
		776	Terminus is a quite bad font (many very wrong glyphs), but for most of my
		777	purposes, it works, and gives a different look, as my normal (Non-bold)
		778	font is already bold, and I want to see a difference between bold and
		779	normal fonts.
		780
		781	Please note that I used the C<urxvt> instance name and not the C<URxvt>
		782	class name. Thats because I use different configs for different purposes,
		783	for example, my IRC window is started with C<-name IRC>, and uses these
		784	defaults:
		785
		786	IRC*title: IRC
		787	IRC*geometry: 87x12+535+542
		788	IRC*saveLines: 0
		789	IRC*mapAlert: true
		790	IRC*font: suxuseuro
		791	IRC*boldFont: suxuseuro
		792	IRC*colorBD: white
		793	IRC*keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		794	IRC*keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
		795
		796	C<Alt-Shift-1> and C<Alt-Shift-2> switch between two different font
		797	sizes. C<suxuseuro> allows me to keep an eye (and actually read)
		798	stuff while keeping a very small window. If somebody pastes something
		799	complicated (e.g. japanese), I temporarily switch to a larger font.
		800
		801	The above is all in my C<.Xdefaults> (I don't use C<.Xresources> nor
		802	C<xrdb>). I also have some resources in a separate C<.Xdefaults-hostname>
		803	file for different hosts, for example, on ym main desktop, I use:
		804
		805	URxvt.keysym.C-M-q: command:\033[3;5;5t
		806	URxvt.keysym.C-M-y: command:\033[3;5;606t
		807	URxvt.keysym.C-M-e: command:\033[3;1605;5t
		808	URxvt.keysym.C-M-c: command:\033[3;1605;606t
		809	URxvt.keysym.C-M-p: perl:test
		810
		811	The first for keysym definitions allow me to quickly bring some windows
		812	in the layout I like most. Ion users might start laughing but will stop
		813	immediately when I tell them that I use my own Fvwm2 module for much the
		814	same effect as Ion provides, and I only very rarely use the above key
		815	combinations :->
		816
		817	=head3 Why doesn't rxvt-unicode read my resources?
		818
		819	Well, why, indeed? It does, in a way very similar to other X
		820	applications. Most importantly, this means that if you or your OS loads
		821	resources into the X display (the right way to do it), rxvt-unicode will
		822	ignore any resource files in your home directory. It will only read
		823	F<$HOME/.Xdefaults> when no resources are attached to the display.
		824
		825	If you have or use an F<$HOME/.Xresources> file, chances are that
		826	resources are loaded into your X-server. In this case, you have to
		827	re-login after every change (or run F<xrdb -merge $HOME/.Xresources>).
		828
		829	Also consider the form resources have to use:
		830
		831	URxvt.resource: value
		832
		833	If you want to use another form (there are lots of different ways of
		834	specifying resources), make sure you understand whether and why it
		835	works. If unsure, use the form above.
		836
		837	=head3 When I log-in to another system it tells me about missing terminfo data?
		838
		839	The terminal description used by rxvt-unicode is not as widely available
		840	as that for xterm, or even rxvt (for which the same problem often arises).
		841
		842	The correct solution for this problem is to install the terminfo, this can
		843	be done like this (with ncurses' infocmp and works as user and admin):
		844
		845	REMOTE=remotesystem.domain
		846	infocmp rxvt-unicode | ssh $REMOTE "mkdir -p .terminfo && cat >/tmp/ti && tic /tmp/ti"
		847
		848	... or by installing rxvt-unicode normally on the remote system,
		849
		850	One some systems you might need to set C<$TERMINFO> to the full path of
		851	F<$HOME/.terminfo> for this to work.
		852
		853	If you cannot or do not want to do this, then you can simply set
		854	C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
		855	problems arising, which includes wrong keymapping, less and different
		856	colours and some refresh errors in fullscreen applications. It's a nice
		857	quick-and-dirty workaround for rare cases, though.
		858
		859	If you always want to do this (and are fine with the consequences) you
		860	can either recompile rxvt-unicode with the desired TERM value or use a
		861	resource to set it:
		862
		863	URxvt.termName: rxvt
		864
		865	If you don't plan to use B<rxvt> (quite common...) you could also replace
		866	the rxvt terminfo file with the rxvt-unicode one and use C<TERM=rxvt>.
		867
		868	=head3 C<tic> outputs some error when compiling the terminfo entry.
		869
		870	Most likely it's the empty definition for C<enacs=>. Just replace it by
		871	C<enacs=\E[0@> and try again.
		872
		873	=head3 C<bash>'s readline does not work correctly under @@URXVT_NAME@@.
		874
		875	See next entry.
		876
		877	=head3 I need a termcap file entry.
		878
		879	One reason you might want this is that some distributions or operating
		880	systems still compile some programs using the long-obsoleted termcap
		881	library (Fedora Core's bash is one example) and rely on a termcap entry
		882	for C<rxvt-unicode>.
		883
		884	You could use rxvt's termcap entry with reasonable results in many cases.
		885	You can also create a termcap entry by using terminfo's infocmp program
		886	like this:
		887
		888	infocmp -C rxvt-unicode
		889
		890	Or you could use this termcap entry, generated by the command above:
		891
		892	rxvt-unicode|rxvt-unicode terminal (X Window System):\
		893	:am:bw:eo:km:mi:ms:xn:xo:\
		894	:co#80:it#8:li#24:lm#0:\
		895	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
		896	:K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
		897	:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\
		898	:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
		899	:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
		900	:dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
		901	:i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
		902	:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
		903	:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
		904	:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
		905	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
		906	:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
		907	:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\
		908	:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
		909	:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\
		910	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
		911	:vs=\E[?25h:
		912
		913	=head3 Why does C<ls> no longer have coloured output?
		914
		915	The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to
		916	decide whether a terminal has colour, but uses its own configuration
		917	file. Needless to say, C<rxvt-unicode> is not in its default file (among
		918	with most other terminals supporting colour). Either add:
		919
		920	TERM rxvt-unicode
		921
		922	to C</etc/DIR_COLORS> or simply add:
		923
		924	alias ls='ls --color=auto'
		925
		926	to your C<.profile> or C<.bashrc>.
		927
		928	=head3 Why doesn't vim/emacs etc. use the 88 colour mode?
		929
		930	See next entry.
		931
		932	=head3 Why doesn't vim/emacs etc. make use of italic?
		933
		934	See next entry.
		935
		936	=head3 Why are the secondary screen-related options not working properly?
		937
		938	Make sure you are using C<TERM=rxvt-unicode>. Some pre-packaged
		939	distributions (most notably Debian GNU/Linux) break rxvt-unicode
		940	by setting C<TERM> to C<rxvt>, which doesn't have these extra
		941	features. Unfortunately, some of these (most notably, again, Debian
		942	GNU/Linux) furthermore fail to even install the C<rxvt-unicode> terminfo
		943	file, so you will need to install it on your own (See the question B<When
		944	I log-in to another system it tells me about missing terminfo data?> on
		945	how to do this).
		946
		947
		948	=head2 Encoding / Locale / Input Method Issues
		949
		950	=head3 Rxvt-unicode does not seem to understand the selected encoding?
		951
		952	See next entry.
		953
		954	=head3 Unicode does not seem to work?
		955
		956	If you encounter strange problems like typing an accented character but
		957	getting two unrelated other characters or similar, or if program output is
		958	subtly garbled, then you should check your locale settings.
		959
		960	Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
		961	programs running in it. Often rxvt-unicode is started in the C<C> locale,
		962	while the login script running within the rxvt-unicode window changes the
		963	locale to something else, e.g. C<en_GB.UTF-8>. Needless to say, this is
		964	not going to work, and is the most common cause for problems.
		965
		966	The best thing is to fix your startup environment, as you will likely run
		967	into other problems. If nothing works you can try this in your .profile.
		968
		969	printf '\33]701;%s\007' "$LC_CTYPE" # $LANG or $LC_ALL are worth a try, too
		970
		971	If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
		972	supported on your systems. Some systems have a C<locale> command which
		973	displays this (also, C<perl -e0> can be used to check locale settings, as
		974	it will complain loudly if it cannot set the locale). If it displays something
		975	like:
		976
		977	locale: Cannot set LC_CTYPE to default locale: ...
		978
		979	Then the locale you specified is not supported on your system.
		980
		981	If nothing works and you are sure that everything is set correctly then
		982	you will need to remember a little known fact: Some programs just don't
		983	support locales :(
		984
		985	=head3 How does rxvt-unicode determine the encoding to use?
		986
		987	See next entry.
		988
		989	=head3 Is there an option to switch encodings?
		990
		991	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
		992	specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
		993	UTF-8 or any other encodings with respect to terminal I/O.
		994
		995	The reasons is that there exists a perfectly fine mechanism for selecting
		996	the encoding, doing I/O and (most important) communicating this to all
		997	applications so everybody agrees on character properties such as width
		998	and code number. This mechanism is the I<locale>. Applications not using
		999	that info will have problems (for example, C<xterm> gets the width of
		1000	characters wrong as it uses its own, locale-independent table under all
		1001	locales).
		1002
		1003	Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
		1004	programs doing the same (that is, most) will automatically agree in the
		1005	interpretation of characters.
		1006
		1007	Unfortunately, there is no system-independent way to select locales, nor
		1008	is there a standard on how locale specifiers will look like.
		1009
		1010	On most systems, the content of the C<LC_CTYPE> environment variable
		1011	contains an arbitrary string which corresponds to an already-installed
		1012	locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
		1013	C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
		1014	(i.e. C<de> or C<german>) are also common.
		1015
		1016	Rxvt-unicode ignores all other locale categories, and except for
		1017	the encoding, ignores country or language-specific settings,
		1018	i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the normally same to
		1019	rxvt-unicode.
		1020
		1021	If you want to use a specific encoding you have to make sure you start
		1022	rxvt-unicode with the correct C<LC_CTYPE> category.
		1023
		1024	=head3 Can I switch locales at runtime?
		1025
		1026	Yes, using an escape sequence. Try something like this, which sets
		1027	rxvt-unicode's idea of C<LC_CTYPE>.
		1028
		1029	printf '\33]701;%s\007' ja_JP.SJIS
		1030
		1031	See also the previous answer.
		1032
		1033	Sometimes this capability is rather handy when you want to work in
		1034	one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
		1035	(e.g. UTF-8). For example, I use this script to start C<xjdic>, which
		1036	first switches to a locale supported by xjdic and back later:
		1037
		1038	printf '\33]701;%s\007' ja_JP.SJIS
		1039	xjdic -js
		1040	printf '\33]701;%s\007' de_DE.UTF-8
		1041
		1042	You can also use xterm's C<luit> program, which usually works fine, except
		1043	for some locales where character width differs between program- and
		1044	rxvt-unicode-locales.
		1045
		1046	=head3 I have problems getting my input method working.
		1047
		1048	Try a search engine, as this is slightly different for every input method server.
		1049
		1050	Here is a checklist:
		1051
		1052	=over 4
		1053
		1054	=item - Make sure your locale I<and> the imLocale are supported on your OS.
		1055
		1056	Try C<locale -a> or check the documentation for your OS.
		1057
		1058	=item - Make sure your locale or imLocale matches a locale supported by your XIM.
		1059
		1060	For example, B<kinput2> does not support UTF-8 locales, you should use
		1061	C<ja_JP.EUC-JP> or equivalent.
		1062
		1063	=item - Make sure your XIM server is actually running.
		1064
		1065	=item - Make sure the C<XMODIFIERS> environment variable is set correctly when I<starting> rxvt-unicode.
		1066
		1067	When you want to use e.g. B<kinput2>, it must be set to
		1068	C<@im=kinput2>. For B<scim>, use C<@im=SCIM>. You can see what input
		1069	method servers are running with this command:
		1070
		1071	xprop -root XIM_SERVERS
		1072
		1073	=item
607		1074
608	=back	1075	=back
609		1076
610	=head1 SYNOPSIS	1077	=head3 My input method wants <some encoding> but I want UTF-8, what can I do?
611		1078
612	# set a new font set	1079	You can specify separate locales for the input method and the rest of the
613	printf '\33]50;%s\007' 9x15,xft:Kochi" Mincho"	1080	terminal, using the resource C<imlocale>:
614		1081
615	# change the locale and tell rxvt-unicode about it	1082	URxvt.imlocale: ja_JP.EUC-JP
616	export LC_CTYPE=ja_JP.EUC-JP; printf "\33]701;$LC_CTYPE\007"
617		1083
618	# set window title	1084	Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
619	printf '\33]2;%s\007' "new window title"	1085	use your input method. Please note, however, that, depending on your Xlib
		1086	version, you may not be able to input characters outside C<EUC-JP> in a
		1087	normal way then, as your input method limits you.
620		1088
621	=head1 DESCRIPTION	1089	=head3 Rxvt-unicode crashes when the X Input Method changes or exits.
		1090
		1091	Unfortunately, this is unavoidable, as the XIM protocol is racy by
		1092	design. Applications can avoid some crashes at the expense of memory
		1093	leaks, and Input Methods can avoid some crashes by careful ordering at
		1094	exit time. B<kinput2> (and derived input methods) generally succeeds,
		1095	while B<SCIM> (or similar input methods) fails. In the end, however,
		1096	crashes cannot be completely avoided even if both sides cooperate.
		1097
		1098	So the only workaround is not to kill your Input Method Servers.
		1099
		1100
		1101	=head2 Operating Systems / Package Maintaining
		1102
		1103	=head3 I am using Debian GNU/Linux and have a problem...
		1104
		1105	The Debian GNU/Linux package of rxvt-unicode in sarge contains large
		1106	patches that considerably change the behaviour of rxvt-unicode (but
		1107	unfortunately this notice has been removed). Before reporting a bug to
		1108	the original rxvt-unicode author please download and install the genuine
		1109	version (L<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
		1110	the problem. If you cannot, chances are that the problems are specific to
		1111	Debian GNU/Linux, in which case it should be reported via the Debian Bug
		1112	Tracking System (use C<reportbug> to report the bug).
		1113
		1114	For other problems that also affect the Debian package, you can and
		1115	probably should use the Debian BTS, too, because, after all, it's also a
		1116	bug in the Debian version and it serves as a reminder for other users that
		1117	might encounter the same issue.
		1118
		1119	=head3 I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
		1120
		1121	You should build one binary with the default options. F<configure>
		1122	now enables most useful options, and the trend goes to making them
		1123	runtime-switchable, too, so there is usually no drawback to enabling them,
		1124	except higher disk and possibly memory usage. The perl interpreter should
		1125	be enabled, as important functionality (menus, selection, likely more in
		1126	the future) depends on it.
		1127
		1128	You should not overwrite the C<perl-ext-common> snd C<perl-ext> resources
		1129	system-wide (except maybe with C<defaults>). This will result in useful
		1130	behaviour. If your distribution aims at low memory, add an empty
		1131	C<perl-ext-common> resource to the app-defaults file. This will keep the
		1132	perl interpreter disabled until the user enables it.
		1133
		1134	If you can/want build more binaries, I recommend building a minimal
		1135	one with C<--disable-everything> (very useful) and a maximal one with
		1136	C<--enable-everything> (less useful, it will be very big due to a lot of
		1137	encodings built-in that increase download times and are rarely used).
		1138
		1139	=head3 I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
		1140
		1141	It should be, starting with release 7.1. You are encouraged to properly
		1142	install urxvt with privileges necessary for your OS now.
		1143
		1144	When rxvt-unicode detects that it runs setuid or setgid, it will fork
		1145	into a helper process for privileged operations (pty handling on some
		1146	systems, utmp/wtmp/lastlog handling on others) and drop privileges
		1147	immediately. This is much safer than most other terminals that keep
		1148	privileges while running (but is more relevant to urxvt, as it contains
		1149	things as perl interpreters, which might be "helpful" to attackers).
		1150
		1151	This forking is done as the very first within main(), which is very early
		1152	and reduces possible bugs to initialisation code run before main(), or
		1153	things like the dynamic loader of your system, which should result in very
		1154	little risk.
		1155
		1156	=head3 On Solaris 9, many line-drawing characters are too wide.
		1157
		1158	Seems to be a known bug, read
		1159	L<http://nixdoc.net/files/forum/about34198.html>. Some people use the
		1160	following ugly workaround to get non-double-wide-characters working:
		1161
		1162	#define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
		1163
		1164	=head3 I am on FreeBSD and rxvt-unicode does not seem to work at all.
		1165
		1166	Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
		1167	in your compile environment, or an implementation that implements it,
		1168	whether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
		1169	B<wchar_t> is represented as unicode.
		1170
		1171	As you might have guessed, FreeBSD does neither define this symbol nor
		1172	does it support it. Instead, it uses its own internal representation of
		1173	B<wchar_t>. This is, of course, completely fine with respect to standards.
		1174
		1175	However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and
		1176	C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>.
		1177
		1178	C<__STDC_ISO_10646__> is the only sane way to support multi-language
		1179	apps in an OS, as using a locale-dependent (and non-standardized)
		1180	representation of B<wchar_t> makes it impossible to convert between
		1181	B<wchar_t> (as used by X11 and your applications) and any other encoding
		1182	without implementing OS-specific-wrappers for each and every locale. There
		1183	simply are no APIs to convert B<wchar_t> into anything except the current
		1184	locale encoding.
		1185
		1186	Some applications (such as the formidable B<mlterm>) work around this
		1187	by carrying their own replacement functions for character set handling
		1188	with them, and either implementing OS-dependent hacks or doing multiple
		1189	conversions (which is slow and unreliable in case the OS implements
		1190	encodings slightly different than the terminal emulator).
		1191
		1192	The rxvt-unicode author insists that the right way to fix this is in the
		1193	system libraries once and for all, instead of forcing every app to carry
		1194	complete replacements for them :)
		1195
		1196	=head3 I use Solaris 9 and it doesn't compile/work/etc.
		1197
		1198	Try the diff in F<doc/solaris9.patch> as a base. It fixes the worst
		1199	problems with C<wcwidth> and a compile problem.
		1200
		1201	=head3 How can I use rxvt-unicode under cygwin?
		1202
		1203	rxvt-unicode should compile and run out of the box on cygwin, using
		1204	the X11 libraries that come with cygwin. libW11 emulation is no
		1205	longer supported (and makes no sense, either, as it only supported a
		1206	single font). I recommend starting the X-server in C<-multiwindow> or
		1207	C<-rootless> mode instead, which will result in similar look&feel as the
		1208	old libW11 emulation.
		1209
		1210	At the time of this writing, cygwin didn't seem to support any multi-byte
		1211	encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited
		1212	to 8-bit encodings.
		1213
		1214	=head1 RXVT-UNICODE TECHNICAL REFERENCE
622		1215
623	The rest of this document describes various technical aspects of	1216	The rest of this document describes various technical aspects of
624	B<rxvt-unicode>. First the description of supported command sequences,	1217	B<rxvt-unicode>. First the description of supported command sequences,
625	followed by menu and pixmap support and last by a description of all	1218	followed by pixmap support and last by a description of all features
626	features selectable at C<configure> time.	1219	selectable at C<configure> time.
627		1220
628	=head1 RXVT TECHNICAL REFERENCE
629
630	=head1 Definitions	1221	=head2 Definitions
631		1222
632	=over 4	1223	=over 4
633		1224
634	=item B<< C<c> >>	1225	=item B<< C<c> >>
635		1226
…		…
653		1244
654	A text parameter composed of printable characters.	1245	A text parameter composed of printable characters.
655		1246
656	=back	1247	=back
657		1248
658	=head1 Values	1249	=head2 Values
659		1250
660	=over 4	1251	=over 4
661		1252
662	=item B<< C<ENQ> >>	1253	=item B<< C<ENQ> >>
663		1254
…		…
706		1297
707	Space Character	1298	Space Character
708		1299
709	=back	1300	=back
710		1301
711	=head1 Escape Sequences	1302	=head2 Escape Sequences
712		1303
713	=over 4	1304	=over 4
714		1305
715	=item B<< C<ESC # 8> >>	1306	=item B<< C<ESC # 8> >>
716		1307
…		…
762	Single Shift Select of G3 Character Set (SS3): affects next character	1353	Single Shift Select of G3 Character Set (SS3): affects next character
763	only I<unimplemented>	1354	only I<unimplemented>
764		1355
765	=item B<< C<ESC Z> >>	1356	=item B<< C<ESC Z> >>
766		1357
767	Obsolete form of returns: B<< C<ESC[?1;2C> >> I<rxvt-unicode compile-time option>	1358	Obsolete form of returns: B<< C<ESC [ ? 1 ; 2 C> >> I<rxvt-unicode compile-time option>
768		1359
769	=item B<< C<ESC c> >>	1360	=item B<< C<ESC c> >>
770		1361
771	Full reset (RIS)	1362	Full reset (RIS)
772		1363
…		…
776		1367
777	=item B<< C<ESC o> >>	1368	=item B<< C<ESC o> >>
778		1369
779	Invoke the G3 Character Set (LS3)	1370	Invoke the G3 Character Set (LS3)
780		1371
781	=item B<< C<ESC> ( C> >>	1372	=item B<< C<ESC ( C> >>
782		1373
783	Designate G0 Character Set (ISO 2022), see below for values of C<C>.	1374	Designate G0 Character Set (ISO 2022), see below for values of C<C>.
784		1375
785	=item B<< C<ESC> ) C> >>	1376	=item B<< C<ESC ) C> >>
786		1377
787	Designate G1 Character Set (ISO 2022), see below for values of C<C>.	1378	Designate G1 Character Set (ISO 2022), see below for values of C<C>.
788		1379
789	=item B<< C<ESC * C> >>	1380	=item B<< C<ESC * C> >>
790		1381
…		…
814		1405
815	=back	1406	=back
816		1407
817	X<CSI>	1408	X<CSI>
818		1409
819	=head1 CSI (Command Sequence Introducer) Sequences	1410	=head2 CSI (Command Sequence Introducer) Sequences
820		1411
821	=over 4	1412	=over 4
822		1413
823	=item B<< C<ESC [ Ps @> >>	1414	=item B<< C<ESC [ Ps @> >>
824		1415
…		…
931		1522
932	=item B<< C<ESC [ Ps c> >>	1523	=item B<< C<ESC [ Ps c> >>
933		1524
934	Send Device Attributes (DA)	1525	Send Device Attributes (DA)
935	B<< C<Ps = 0> >> (or omitted): request attributes from terminal	1526	B<< C<Ps = 0> >> (or omitted): request attributes from terminal
936	returns: B<< C<ESC[?1;2c> >> (``I am a VT100 with Advanced Video	1527	returns: B<< C<ESC [ ? 1 ; 2 c> >> (``I am a VT100 with Advanced Video
937	Option'')	1528	Option'')
938		1529
939	=item B<< C<ESC [ Ps d> >>	1530	=item B<< C<ESC [ Ps d> >>
940		1531
941	Cursor to Line B<< C<Ps> >> (VPA)	1532	Cursor to Line B<< C<Ps> >> (VPA)
…		…
1057		1648
1058	=item B<< C<ESC [ s> >>	1649	=item B<< C<ESC [ s> >>
1059		1650
1060	Save Cursor (SC)	1651	Save Cursor (SC)
1061		1652
		1653	=item B<< C<ESC [ Ps;Pt t> >>
		1654
		1655	Window Operations
		1656
		1657	=begin table
		1658
		1659	B<< C<Ps = 1> >> Deiconify (map) window
		1660	B<< C<Ps = 2> >> Iconify window
		1661	B<< C<Ps = 3> >> B<< C<ESC [ 3 ; X ; Y t> >> Move window to (X|Y)
		1662	B<< C<Ps = 4> >> B<< C<ESC [ 4 ; H ; W t> >> Resize to WxH pixels
		1663	B<< C<Ps = 5> >> Raise window
		1664	B<< C<Ps = 6> >> Lower window
		1665	B<< C<Ps = 7> >> Refresh screen once
		1666	B<< C<Ps = 8> >> B<< C<ESC [ 8 ; R ; C t> >> Resize to R rows and C columns
		1667	B<< C<Ps = 11> >> Report window state (responds with C<Ps = 1> or C<Ps = 2>)
		1668	B<< C<Ps = 13> >> Report window position (responds with C<Ps = 3>)
		1669	B<< C<Ps = 14> >> Report window pixel size (responds with C<Ps = 4>)
		1670	B<< C<Ps = 18> >> Report window text size (responds with C<Ps = 7>)
		1671	B<< C<Ps = 19> >> Currently the same as C<Ps = 18>, but responds with C<Ps = 9>
		1672	B<< C<Ps = 20> >> Reports icon label (B<< C<ESC ] L NAME \234> >>)
		1673	B<< C<Ps = 21> >> Reports window title (B<< C<ESC ] l NAME \234> >>)
		1674	B<< C<Ps = 24..> >> Set window height to C<Ps> rows
		1675
		1676	=end table
		1677
		1678	=item B<< C<ESC [ u> >>
		1679
		1680	Restore Cursor
		1681
1062	=item B<< C<ESC [ Ps x> >>	1682	=item B<< C<ESC [ Ps x> >>
1063		1683
1064	Request Terminal Parameters (DECREQTPARM)	1684	Request Terminal Parameters (DECREQTPARM)
1065		1685
1066	=item B<< C<ESC [ u> >>
1067
1068	Restore Cursor
1069
1070	=back	1686	=back
1071		1687
1072	X<PrivateModes>	1688	X<PrivateModes>
1073		1689
1074	=head1 DEC Private Modes	1690	=head2 DEC Private Modes
1075		1691
1076	=over 4	1692	=over 4
1077		1693
1078	=item B<< C<ESC [ ? Pm h> >>	1694	=item B<< C<ESC [ ? Pm h> >>
1079		1695
…		…
1095		1711
1096	Toggle DEC Private Mode Values (rxvt extension). I<where>	1712	Toggle DEC Private Mode Values (rxvt extension). I<where>
1097		1713
1098	=over 4	1714	=over 4
1099		1715
1100	=item B<< C<Ps = 1> >> (DECCKM)	1716	=item B<< C<Pm = 1> >> (DECCKM)
1101		1717
1102	=begin table	1718	=begin table
1103		1719
1104	B<< C<h> >> Application Cursor Keys	1720	B<< C<h> >> Application Cursor Keys
1105	B<< C<l> >> Normal Cursor Keys	1721	B<< C<l> >> Normal Cursor Keys
1106		1722
1107	=end table	1723	=end table
1108		1724
1109	=item B<< C<Ps = 2> >> (ANSI/VT52 mode)	1725	=item B<< C<Pm = 2> >> (ANSI/VT52 mode)
1110		1726
1111	=begin table	1727	=begin table
1112		1728
1113	B<< C<h> >> Enter VT52 mode	1729	B<< C<h> >> Enter VT52 mode
1114	B<< C<l> >> Enter VT52 mode	1730	B<< C<l> >> Enter VT52 mode
1115		1731
1116	=end table	1732	=end table
1117		1733
1118	=item B<< C<Ps = 3> >>	1734	=item B<< C<Pm = 3> >>
1119		1735
1120	=begin table	1736	=begin table
1121		1737
1122	B<< C<h> >> 132 Column Mode (DECCOLM)	1738	B<< C<h> >> 132 Column Mode (DECCOLM)
1123	B<< C<l> >> 80 Column Mode (DECCOLM)	1739	B<< C<l> >> 80 Column Mode (DECCOLM)
1124		1740
1125	=end table	1741	=end table
1126		1742
1127	=item B<< C<Ps = 4> >>	1743	=item B<< C<Pm = 4> >>
1128		1744
1129	=begin table	1745	=begin table
1130		1746
1131	B<< C<h> >> Smooth (Slow) Scroll (DECSCLM)	1747	B<< C<h> >> Smooth (Slow) Scroll (DECSCLM)
1132	B<< C<l> >> Jump (Fast) Scroll (DECSCLM)	1748	B<< C<l> >> Jump (Fast) Scroll (DECSCLM)
1133		1749
1134	=end table	1750	=end table
1135		1751
1136	=item B<< C<Ps = 5> >>	1752	=item B<< C<Pm = 5> >>
1137		1753
1138	=begin table	1754	=begin table
1139		1755
1140	B<< C<h> >> Reverse Video (DECSCNM)	1756	B<< C<h> >> Reverse Video (DECSCNM)
1141	B<< C<l> >> Normal Video (DECSCNM)	1757	B<< C<l> >> Normal Video (DECSCNM)
1142		1758
1143	=end table	1759	=end table
1144		1760
1145	=item B<< C<Ps = 6> >>	1761	=item B<< C<Pm = 6> >>
1146		1762
1147	=begin table	1763	=begin table
1148		1764
1149	B<< C<h> >> Origin Mode (DECOM)	1765	B<< C<h> >> Origin Mode (DECOM)
1150	B<< C<l> >> Normal Cursor Mode (DECOM)	1766	B<< C<l> >> Normal Cursor Mode (DECOM)
1151		1767
1152	=end table	1768	=end table
1153		1769
1154	=item B<< C<Ps = 7> >>	1770	=item B<< C<Pm = 7> >>
1155		1771
1156	=begin table	1772	=begin table
1157		1773
1158	B<< C<h> >> Wraparound Mode (DECAWM)	1774	B<< C<h> >> Wraparound Mode (DECAWM)
1159	B<< C<l> >> No Wraparound Mode (DECAWM)	1775	B<< C<l> >> No Wraparound Mode (DECAWM)
1160		1776
1161	=end table	1777	=end table
1162		1778
1163	=item B<< C<Ps = 8> >> I<unimplemented>	1779	=item B<< C<Pm = 8> >> I<unimplemented>
1164		1780
1165	=begin table	1781	=begin table
1166		1782
1167	B<< C<h> >> Auto-repeat Keys (DECARM)	1783	B<< C<h> >> Auto-repeat Keys (DECARM)
1168	B<< C<l> >> No Auto-repeat Keys (DECARM)	1784	B<< C<l> >> No Auto-repeat Keys (DECARM)
1169		1785
1170	=end table	1786	=end table
1171		1787
1172	=item B<< C<Ps = 9> >> X10 XTerm	1788	=item B<< C<Pm = 9> >> X10 XTerm
1173		1789
1174	=begin table	1790	=begin table
1175		1791
1176	B<< C<h> >> Send Mouse X & Y on button press.	1792	B<< C<h> >> Send Mouse X & Y on button press.
1177	B<< C<l> >> No mouse reporting.	1793	B<< C<l> >> No mouse reporting.
1178		1794
1179	=end table	1795	=end table
1180		1796
1181	=item B<< C<Ps = 10> >> (B<rxvt>)
1182
1183	=begin table
1184
1185	B<< C<h> >> menuBar visible
1186	B<< C<l> >> menuBar invisible
1187
1188	=end table
1189
1190	=item B<< C<Ps = 25> >>	1797	=item B<< C<Pm = 25> >>
1191		1798
1192	=begin table	1799	=begin table
1193		1800
1194	B<< C<h> >> Visible cursor {cnorm/cvvis}	1801	B<< C<h> >> Visible cursor {cnorm/cvvis}
1195	B<< C<l> >> Invisible cursor {civis}	1802	B<< C<l> >> Invisible cursor {civis}
1196		1803
1197	=end table	1804	=end table
1198		1805
1199	=item B<< C<Ps = 30> >>	1806	=item B<< C<Pm = 30> >>
1200		1807
1201	=begin table	1808	=begin table
1202		1809
1203	B<< C<h> >> scrollBar visisble	1810	B<< C<h> >> scrollBar visisble
1204	B<< C<l> >> scrollBar invisisble	1811	B<< C<l> >> scrollBar invisisble
1205		1812
1206	=end table	1813	=end table
1207		1814
1208	=item B<< C<Ps = 35> >> (B<rxvt>)	1815	=item B<< C<Pm = 35> >> (B<rxvt>)
1209		1816
1210	=begin table	1817	=begin table
1211		1818
1212	B<< C<h> >> Allow XTerm Shift+key sequences	1819	B<< C<h> >> Allow XTerm Shift+key sequences
1213	B<< C<l> >> Disallow XTerm Shift+key sequences	1820	B<< C<l> >> Disallow XTerm Shift+key sequences
1214		1821
1215	=end table	1822	=end table
1216		1823
1217	=item B<< C<Ps = 38> >> I<unimplemented>	1824	=item B<< C<Pm = 38> >> I<unimplemented>
1218		1825
1219	Enter Tektronix Mode (DECTEK)	1826	Enter Tektronix Mode (DECTEK)
1220		1827
1221	=item B<< C<Ps = 40> >>	1828	=item B<< C<Pm = 40> >>
1222		1829
1223	=begin table	1830	=begin table
1224		1831
1225	B<< C<h> >> Allow 80/132 Mode	1832	B<< C<h> >> Allow 80/132 Mode
1226	B<< C<l> >> Disallow 80/132 Mode	1833	B<< C<l> >> Disallow 80/132 Mode
1227		1834
1228	=end table	1835	=end table
1229		1836
1230	=item B<< C<Ps = 44> >> I<unimplemented>	1837	=item B<< C<Pm = 44> >> I<unimplemented>
1231		1838
1232	=begin table	1839	=begin table
1233		1840
1234	B<< C<h> >> Turn On Margin Bell	1841	B<< C<h> >> Turn On Margin Bell
1235	B<< C<l> >> Turn Off Margin Bell	1842	B<< C<l> >> Turn Off Margin Bell
1236		1843
1237	=end table	1844	=end table
1238		1845
1239	=item B<< C<Ps = 45> >> I<unimplemented>	1846	=item B<< C<Pm = 45> >> I<unimplemented>
1240		1847
1241	=begin table	1848	=begin table
1242		1849
1243	B<< C<h> >> Reverse-wraparound Mode	1850	B<< C<h> >> Reverse-wraparound Mode
1244	B<< C<l> >> No Reverse-wraparound Mode	1851	B<< C<l> >> No Reverse-wraparound Mode
1245		1852
1246	=end table	1853	=end table
1247		1854
1248	=item B<< C<Ps = 46> >> I<unimplemented>	1855	=item B<< C<Pm = 46> >> I<unimplemented>
1249		1856
1250	=item B<< C<Ps = 47> >>	1857	=item B<< C<Pm = 47> >>
1251		1858
1252	=begin table	1859	=begin table
1253		1860
1254	B<< C<h> >> Use Alternate Screen Buffer	1861	B<< C<h> >> Use Alternate Screen Buffer
1255	B<< C<l> >> Use Normal Screen Buffer	1862	B<< C<l> >> Use Normal Screen Buffer
1256		1863
1257	=end table	1864	=end table
1258		1865
1259	X<Priv66>	1866	X<Priv66>
1260		1867
1261	=item B<< C<Ps = 66> >>	1868	=item B<< C<Pm = 66> >>
1262		1869
1263	=begin table	1870	=begin table
1264		1871
1265	B<< C<h> >> Application Keypad (DECPAM) == C<ESC =>	1872	B<< C<h> >> Application Keypad (DECPAM) == C<ESC =>
1266	B<< C<l> >> Normal Keypad (DECPNM) == C<< ESC > >>	1873	B<< C<l> >> Normal Keypad (DECPNM) == C<< ESC > >>
1267		1874
1268	=end table	1875	=end table
1269		1876
1270	=item B<< C<Ps = 67> >>	1877	=item B<< C<Pm = 67> >>
1271		1878
1272	=begin table	1879	=begin table
1273		1880
1274	B<< C<h> >> Backspace key sends B<< C<BS> (DECBKM) >>	1881	B<< C<h> >> Backspace key sends B<< C<BS> (DECBKM) >>
1275	B<< C<l> >> Backspace key sends B<< C<DEL> >>	1882	B<< C<l> >> Backspace key sends B<< C<DEL> >>
1276		1883
1277	=end table	1884	=end table
1278		1885
1279	=item B<< C<Ps = 1000> >> (X11 XTerm)	1886	=item B<< C<Pm = 1000> >> (X11 XTerm)
1280		1887
1281	=begin table	1888	=begin table
1282		1889
1283	B<< C<h> >> Send Mouse X & Y on button press and release.	1890	B<< C<h> >> Send Mouse X & Y on button press and release.
1284	B<< C<l> >> No mouse reporting.	1891	B<< C<l> >> No mouse reporting.
1285		1892
1286	=end table	1893	=end table
1287		1894
1288	=item B<< C<Ps = 1001> >> (X11 XTerm) I<unimplemented>	1895	=item B<< C<Pm = 1001> >> (X11 XTerm) I<unimplemented>
1289		1896
1290	=begin table	1897	=begin table
1291		1898
1292	B<< C<h> >> Use Hilite Mouse Tracking.	1899	B<< C<h> >> Use Hilite Mouse Tracking.
1293	B<< C<l> >> No mouse reporting.	1900	B<< C<l> >> No mouse reporting.
1294		1901
1295	=end table	1902	=end table
1296		1903
1297	=item B<< C<Ps = 1010> >> (B<rxvt>)	1904	=item B<< C<Pm = 1010> >> (B<rxvt>)
1298		1905
1299	=begin table	1906	=begin table
1300		1907
1301	B<< C<h> >> Don't scroll to bottom on TTY output	1908	B<< C<h> >> Don't scroll to bottom on TTY output
1302	B<< C<l> >> Scroll to bottom on TTY output	1909	B<< C<l> >> Scroll to bottom on TTY output
1303		1910
1304	=end table	1911	=end table
1305		1912
1306	=item B<< C<Ps = 1011> >> (B<rxvt>)	1913	=item B<< C<Pm = 1011> >> (B<rxvt>)
1307		1914
1308	=begin table	1915	=begin table
1309		1916
1310	B<< C<h> >> Scroll to bottom when a key is pressed	1917	B<< C<h> >> Scroll to bottom when a key is pressed
1311	B<< C<l> >> Don't scroll to bottom when a key is pressed	1918	B<< C<l> >> Don't scroll to bottom when a key is pressed
1312		1919
1313	=end table	1920	=end table
1314		1921
		1922	=item B<< C<Pm = 1021> >> (B<rxvt>)
		1923
		1924	=begin table
		1925
		1926	B<< C<h> >> Bold/italic implies high intensity (see option B<-is>)
		1927	B<< C<l> >> Font styles have no effect on intensity (Compile styles)
		1928
		1929	=end table
		1930
1315	=item B<< C<Ps = 1047> >>	1931	=item B<< C<Pm = 1047> >>
1316		1932
1317	=begin table	1933	=begin table
1318		1934
1319	B<< C<h> >> Use Alternate Screen Buffer	1935	B<< C<h> >> Use Alternate Screen Buffer
1320	B<< C<l> >> Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it	1936	B<< C<l> >> Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
1321		1937
1322	=end table	1938	=end table
1323		1939
1324	=item B<< C<Ps = 1048> >>	1940	=item B<< C<Pm = 1048> >>
1325		1941
1326	=begin table	1942	=begin table
1327		1943
1328	B<< C<h> >> Save cursor position	1944	B<< C<h> >> Save cursor position
1329	B<< C<l> >> Restore cursor position	1945	B<< C<l> >> Restore cursor position
1330		1946
1331	=end table	1947	=end table
1332		1948
1333	=item B<< C<Ps = 1049> >>	1949	=item B<< C<Pm = 1049> >>
1334		1950
1335	=begin table	1951	=begin table
1336		1952
1337	B<< C<h> >> Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it	1953	B<< C<h> >> Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it
1338	B<< C<l> >> Use Normal Screen Buffer	1954	B<< C<l> >> Use Normal Screen Buffer
…		…
1343		1959
1344	=back	1960	=back
1345		1961
1346	X<XTerm>	1962	X<XTerm>
1347		1963
1348	=head1 XTerm Operating System Commands	1964	=head2 XTerm Operating System Commands
1349		1965
1350	=over 4	1966	=over 4
1351		1967
1352	=item B<< C<ESC ] Ps;Pt ST> >>	1968	=item B<< C<ESC ] Ps;Pt ST> >>
1353		1969
…		…
1365	B<< C<Ps = 10> >> Change colour of text foreground to B<< C<Pt> >> B<(NB: may change in future)>	1981	B<< C<Ps = 10> >> Change colour of text foreground to B<< C<Pt> >> B<(NB: may change in future)>
1366	B<< C<Ps = 11> >> Change colour of text background to B<< C<Pt> >> B<(NB: may change in future)>	1982	B<< C<Ps = 11> >> Change colour of text background to B<< C<Pt> >> B<(NB: may change in future)>
1367	B<< C<Ps = 12> >> Change colour of text cursor foreground to B<< C<Pt> >>	1983	B<< C<Ps = 12> >> Change colour of text cursor foreground to B<< C<Pt> >>
1368	B<< C<Ps = 13> >> Change colour of mouse foreground to B<< C<Pt> >>	1984	B<< C<Ps = 13> >> Change colour of mouse foreground to B<< C<Pt> >>
1369	B<< C<Ps = 17> >> Change colour of highlight characters to B<< C<Pt> >>	1985	B<< C<Ps = 17> >> Change colour of highlight characters to B<< C<Pt> >>
1370	B<< C<Ps = 18> >> Change colour of bold characters to B<< C<Pt> >>	1986	B<< C<Ps = 18> >> Change colour of bold characters to B<< C<Pt> >> [deprecated, see 706]
1371	B<< C<Ps = 19> >> Change colour of underlined characters to B<< C<Pt> >>	1987	B<< C<Ps = 19> >> Change colour of underlined characters to B<< C<Pt> >> [deprecated, see 707]
		1988	B<< C<Ps = 20> >> Change background pixmap parameters (see section XPM) (Compile XPM).
1372	B<< C<Ps = 20> >> Change default background to B<< C<Pt> >>	1989	B<< C<Ps = 39> >> Change default foreground colour to B<< C<Pt> >>.
1373	B<< C<Ps = 39> >> Change default foreground colour to B<< C<Pt> >> I<rxvt compile-time option>
1374	B<< C<Ps = 46> >> Change Log File to B<< C<Pt> >> I<unimplemented>	1990	B<< C<Ps = 46> >> Change Log File to B<< C<Pt> >> I<unimplemented>
1375	B<< C<Ps = 49> >> Change default background colour to B<< C<Pt> >> I<rxvt compile-time option>	1991	B<< C<Ps = 49> >> Change default background colour to B<< C<Pt> >>.
1376	B<< C<Ps = 50> >> Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>	1992	B<< C<Ps = 50> >> Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>
1377	B<< C<Ps = 55> >> Log all scrollback buffer and all of screen to B<< C<Pt> >>	1993	B<< C<Ps = 55> >> Log all scrollback buffer and all of screen to B<< C<Pt> >>
1378	B<< C<Ps = 701> >> Change current locale to B<< C<Pt> >>, or, if B<< C<Pt> >> is B<< C<?> >>, return the current locale (@@RXVT_NAME@@ extension)	1994	B<< C<Ps = 701> >> Change current locale to B<< C<Pt> >>, or, if B<< C<Pt> >> is B<< C<?> >>, return the current locale (Compile frills).
1379	B<< C<Ps = 703> >> Menubar command B<< C<Pt> >> I<rxvt compile-time option> (rxvt-unicode extension)	1995	B<< C<Ps = 702> >> Request version if B<< C<Pt> >> is B<< C<?> >>, returning C<rxvt-unicode>, the resource name, the major and minor version numbers, e.g. C<ESC ] 702 ; rxvt-unicode ; urxvt ; 7 ; 4 ST>.
1380	B<< C<Ps = 704> >> Change colour of italic characters to B<< C<Pt> >>	1996	B<< C<Ps = 704> >> Change colour of italic characters to B<< C<Pt> >>
1381	B<< C<Ps = 705> >> Change background pixmap tint colour to B<< C<Pt> >>	1997	B<< C<Ps = 705> >> Change background pixmap tint colour to B<< C<Pt> >> (Compile transparency).
		1998	B<< C<Ps = 706> >> Change colour of bold characters to B<< C<Pt> >>
		1999	B<< C<Ps = 707> >> Change colour of underlined characters to B<< C<Pt> >>
1382	B<< C<Ps = 710> >> Set normal fontset to B<< C<Pt> >>. Same as C<Ps = 50>.	2000	B<< C<Ps = 710> >> Set normal fontset to B<< C<Pt> >>. Same as C<Ps = 50>.
1383	B<< C<Ps = 711> >> Set bold fontset to B<< C<Pt> >>. Similar to C<Ps = 50>.	2001	B<< C<Ps = 711> >> Set bold fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
1384	B<< C<Ps = 712> >> Set italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50>.	2002	B<< C<Ps = 712> >> Set italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
1385	B<< C<Ps = 713> >> Set bold-italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50>.	2003	B<< C<Ps = 713> >> Set bold-italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
		2004	B<< C<Ps = 720> >> Move viewing window up by B<< C<Pt> >> lines, or clear scrollback buffer if C<Pt = 0> (Compile frills).
		2005	B<< C<Ps = 721> >> Move viewing window down by B<< C<Pt> >> lines, or clear scrollback buffer if C<Pt = 0> (Compile frills).
		2006	B<< C<Ps = 777> >> Call the perl extension with the given string, which should be of the form C<extension:parameters> (Compile perl).
1386		2007
1387	=end table	2008	=end table
1388		2009
1389	=back	2010	=back
1390
1391	X<menuBar>
1392
1393	=head1 menuBar
1394
1395	B<< The exact syntax used is I<almost> solidified. >>
1396	In the menus, B<DON'T> try to use menuBar commands that add or remove a
1397	menuBar.
1398
1399	Note that in all of the commands, the B<< I</path/> >> I<cannot> be
1400	omitted: use B<./> to specify a menu relative to the current menu.
1401
1402	=head2 Overview of menuBar operation
1403
1404	For the menuBar XTerm escape sequence C<ESC ] 703 ; Pt ST>, the syntax
1405	of C<Pt> can be used for a variety of tasks:
1406
1407	At the top level is the current menuBar which is a member of a circular
1408	linked-list of other such menuBars.
1409
1410	The menuBar acts as a parent for the various drop-down menus, which in
1411	turn, may have labels, separator lines, menuItems and subMenus.
1412
1413	The menuItems are the useful bits: you can use them to mimic keyboard
1414	input or even to send text or escape sequences back to rxvt.
1415
1416	The menuBar syntax is intended to provide a simple yet robust method of
1417	constructing and manipulating menus and navigating through the
1418	menuBars.
1419
1420	The first step is to use the tag B<< [menu:I<name>] >> which creates
1421	the menuBar called I<name> and allows access. You may now or menus,
1422	subMenus, and menuItems. Finally, use the tag B<[done]> to set the
1423	menuBar access as B<readonly> to prevent accidental corruption of the
1424	menus. To re-access the current menuBar for alterations, use the tag
1425	B<[menu]>, make the alterations and then use B<[done]>
1426
1427	X<menuBarCommands>
1428
1429	=head2 Commands
1430
1431	=over 4
1432
1433	=item B<< [menu:+I<name>] >>
1434
1435	access the named menuBar for creation or alteration. If a new menuBar
1436	is created, it is called I<name> (max of 15 chars) and the current
1437	menuBar is pushed onto the stack
1438
1439	=item B<[menu]>
1440
1441	access the current menuBar for alteration
1442
1443	=item B<< [title:+I<string>] >>
1444
1445	set the current menuBar's title to I<string>, which may contain the
1446	following format specifiers:
1447	B<%%> : literal B<%> character
1448	B<%n> : rxvt name (as per the B<-name> command-line option)
1449	B<%v> : rxvt version
1450
1451	=item B<[done]>
1452
1453	set menuBar access as B<readonly>.
1454	End-of-file tag for B<< [read:+I<file>] >> operations.
1455
1456	=item B<< [read:+I<file>] >>
1457
1458	read menu commands directly from I<file> (extension ".menu" will be
1459	appended if required.) Start reading at a line with B<[menu]> or B<<
1460	[menu:+I<name> >> and continuing until B<[done]> is encountered.
1461
1462	Blank and comment lines (starting with B<#>) are ignored. Actually,
1463	since any invalid menu commands are also ignored, almost anything could
1464	be construed as a comment line, but this may be tightened up in the
1465	future ... so don't count on it!.
1466
1467	=item B<< [read:+I<file>;+I<name>] >>
1468
1469	The same as B<< [read:+I<file>] >>, but start reading at a line with
1470	B<< [menu:+I<name>] >> and continuing until B<< [done:+I<name>] >> or
1471	B<[done]> is encountered.
1472
1473	=item B<[dump]>
1474
1475	dump all menuBars to the file B</tmp/rxvt-PID> in a format suitable for
1476	later rereading.
1477
1478	=item B<[rm:name]>
1479
1480	remove the named menuBar
1481
1482	=item B<[rm] [rm:]>
1483
1484	remove the current menuBar
1485
1486	=item B<[rm*] [rm:*]>
1487
1488	remove all menuBars
1489
1490	=item B<[swap]>
1491
1492	swap the top two menuBars
1493
1494	=item B<[prev]>
1495
1496	access the previous menuBar
1497
1498	=item B<[next]>
1499
1500	access the next menuBar
1501
1502	=item B<[show]>
1503
1504	Enable display of the menuBar
1505
1506	=item B<[hide]>
1507
1508	Disable display of the menuBar
1509
1510	=item B<< [pixmap:+I<name>] >>
1511
1512	=item B<< [pixmap:+I<name>;I<scaling>] >>
1513
1514	(set the background pixmap globally
1515
1516	B<< A Future implementation I<may> make this local to the menubar >>)
1517
1518	=item B<< [:+I<command>:] >>
1519
1520	ignore the menu readonly status and issue a I<command> to or a menu or
1521	menuitem or change the ; a useful shortcut for setting the quick arrows
1522	from a menuBar.
1523
1524	=back
1525
1526	X<menuBarAdd>
1527
1528	=head2 Adding and accessing menus
1529
1530	The following commands may also be B<+> prefixed.
1531
1532	=over 4
1533
1534	=item B</+>
1535
1536	access menuBar top level
1537
1538	=item B<./+>
1539
1540	access current menu level
1541
1542	=item B<../+>
1543
1544	access parent menu (1 level up)
1545
1546	=item B<../../>
1547
1548	access parent menu (multiple levels up)
1549
1550	=item B<< I</path/>menu >>
1551
1552	add/access menu
1553
1554	=item B<< I</path/>menu/* >>
1555
1556	add/access menu and clear it if it exists
1557
1558	=item B<< I</path/>{-} >>
1559
1560	add separator
1561
1562	=item B<< I</path/>{item} >>
1563
1564	add B<item> as a label
1565
1566	=item B<< I</path/>{item} action >>
1567
1568	add/alter I<menuitem> with an associated I<action>
1569
1570	=item B<< I</path/>{item}{right-text} >>
1571
1572	add/alter I<menuitem> with B<right-text> as the right-justified text
1573	and as the associated I<action>
1574
1575	=item B<< I</path/>{item}{rtext} action >>
1576
1577	add/alter I<menuitem> with an associated I<action> and with B<rtext> as
1578	the right-justified text.
1579
1580	=back
1581
1582	=over 4
1583
1584	=item Special characters in I<action> must be backslash-escaped:
1585
1586	B<\a \b \E \e \n \r \t \octal>
1587
1588	=item or in control-character notation:
1589
1590	B<^@, ^A .. ^Z .. ^_, ^?>
1591
1592	=back
1593
1594	To send a string starting with a B<NUL> (B<^@>) character to the
1595	program, start I<action> with a pair of B<NUL> characters (B<^@^@>),
1596	the first of which will be stripped off and the balance directed to the
1597	program. Otherwise if I<action> begins with B<NUL> followed by
1598	non-+B<NUL> characters, the leading B<NUL> is stripped off and the
1599	balance is sent back to rxvt.
1600
1601	As a convenience for the many Emacs-type editors, I<action> may start
1602	with B<M-> (eg, B<M-$> is equivalent to B<\E$>) and a B<CR> will be
1603	appended if missed from B<M-x> commands.
1604
1605	As a convenience for issuing XTerm B<ESC]> sequences from a menubar (or
1606	quick arrow), a B<BEL> (B<^G>) will be appended if needed.
1607
1608	=over 4
1609
1610	=item For example,
1611
1612	B<M-xapropos> is equivalent to B<\Exapropos\r>
1613
1614	=item and
1615
1616	B<\E]703;mona;100> is equivalent to B<\E]703;mona;100\a>
1617
1618	=back
1619
1620	The option B<< {I<right-rtext>} >> will be right-justified. In the
1621	absence of a specified action, this text will be used as the I<action>
1622	as well.
1623
1624	=over 4
1625
1626	=item For example,
1627
1628	B</File/{Open}{^X^F}> is equivalent to B</File/{Open}{^X^F} ^X^F>
1629
1630	=back
1631
1632	The left label I<is> necessary, since it's used for matching, but
1633	implicitly hiding the left label (by using same name for both left and
1634	right labels), or explicitly hiding the left label (by preceeding it
1635	with a dot), makes it possible to have right-justified text only.
1636
1637	=over 4
1638
1639	=item For example,
1640
1641	B</File/{Open}{Open} Open-File-Action>
1642
1643	=item or hiding it
1644
1645	B</File/{.anylabel}{Open} Open-File-Action>
1646
1647	=back
1648
1649	X<menuBarRemove>
1650
1651	=head2 Removing menus
1652
1653	=over 4
1654
1655	=item B<< -/*+ >>
1656
1657	remove all menus from the menuBar, the same as B<[clear]>
1658
1659	=item B<< -+I</path>menu+ >>
1660
1661	remove menu
1662
1663	=item B<< -+I</path>{item}+ >>
1664
1665	remove item
1666
1667	=item B<< -+I</path>{-} >>
1668
1669	remove separator)
1670
1671	=item B<-/path/menu/*>
1672
1673	remove all items, separators and submenus from menu
1674
1675	=back
1676
1677	X<menuBarArrows>
1678
1679	=head2 Quick Arrows
1680
1681	The menus also provide a hook for I<quick arrows> to provide easier
1682	user access. If nothing has been explicitly set, the default is to
1683	emulate the curror keys. The syntax permits each arrow to be altered
1684	individually or all four at once without re-entering their common
1685	beginning/end text. For example, to explicitly associate cursor actions
1686	with the arrows, any of the following forms could be used:
1687
1688	=over 4
1689
1690	=item B<< <r>+I<Right> >>
1691
1692	=item B<< <l>+I<Left> >>
1693
1694	=item B<< <u>+I<Up> >>
1695
1696	=item B<< <d>+I<Down> >>
1697
1698	Define actions for the respective arrow buttons
1699
1700	=item B<< <b>+I<Begin> >>
1701
1702	=item B<< <e>+I<End> >>
1703
1704	Define common beginning/end parts for I<quick arrows> which used in
1705	conjunction with the above <r> <l> <u> <d> constructs
1706
1707	=back
1708
1709	=over 4
1710
1711	=item For example, define arrows individually,
1712
1713	<u>\E[A
1714
1715	<d>\E[B
1716
1717	<r>\E[C
1718
1719	<l>\E[D
1720
1721	=item or all at once
1722
1723	<u>\E[AZ<><d>\E[BZ<><r>\E[CZ<><l>\E[D
1724
1725	=item or more compactly (factoring out common parts)
1726
1727	<b>\E[<u>AZ<><d>BZ<><r>CZ<><l>D
1728
1729	=back
1730
1731	X<menuBarSummary>
1732
1733	=head2 Command Summary
1734
1735	A short summary of the most I<common> commands:
1736
1737	=over 4
1738
1739	=item [menu:name]
1740
1741	use an existing named menuBar or start a new one
1742
1743	=item [menu]
1744
1745	use the current menuBar
1746
1747	=item [title:string]
1748
1749	set menuBar title
1750
1751	=item [done]
1752
1753	set menu access to readonly and, if reading from a file, signal EOF
1754
1755	=item [done:name]
1756
1757	if reading from a file using [read:file;name] signal EOF
1758
1759	=item [rm:name]
1760
1761	remove named menuBar(s)
1762
1763	=item [rm] [rm:]
1764
1765	remove current menuBar
1766
1767	=item [rm*] [rm:*]
1768
1769	remove all menuBar(s)
1770
1771	=item [swap]
1772
1773	swap top two menuBars
1774
1775	=item [prev]
1776
1777	access the previous menuBar
1778
1779	=item [next]
1780
1781	access the next menuBar
1782
1783	=item [show]
1784
1785	map menuBar
1786
1787	=item [hide]
1788
1789	unmap menuBar
1790
1791	=item [pixmap;file]
1792
1793	=item [pixmap;file;scaling]
1794
1795	set a background pixmap
1796
1797	=item [read:file]
1798
1799	=item [read:file;name]
1800
1801	read in a menu from a file
1802
1803	=item [dump]
1804
1805	dump out all menuBars to /tmp/rxvt-PID
1806
1807	=item /
1808
1809	access menuBar top level
1810
1811	=item ./
1812
1813	=item ../
1814
1815	=item ../../
1816
1817	access current or parent menu level
1818
1819	=item /path/menu
1820
1821	add/access menu
1822
1823	=item /path/{-}
1824
1825	add separator
1826
1827	=item /path/{item}{rtext} action
1828
1829	add/alter menu item
1830
1831	=item -/*
1832
1833	remove all menus from the menuBar
1834
1835	=item -/path/menu
1836
1837	remove menu items, separators and submenus from menu
1838
1839	=item -/path/menu
1840
1841	remove menu
1842
1843	=item -/path/{item}
1844
1845	remove item
1846
1847	=item -/path/{-}
1848
1849	remove separator
1850
1851	=item <b>Begin<r>Right<l>Left<u>Up<d>Down<e>End
1852
1853	menu quick arrows
1854
1855	=back
1856	X<XPM>
1857		2011
1858	=head1 XPM	2012	=head1 XPM
1859		2013
1860	For the XPM XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value	2014	For the XPM XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value
1861	of B<< C<Pt> >> can be the name of the background pixmap followed by a	2015	of B<< C<Pt> >> can be the name of the background pixmap followed by a
…		…
1959	=begin table	2113	=begin table
1960		2114
1961	4 Shift	2115	4 Shift
1962	8 Meta	2116	8 Meta
1963	16 Control	2117	16 Control
1964	32 Double Click I<(Rxvt extension)>	2118	32 Double Click I<(rxvt extension)>
1965		2119
1966	=end table	2120	=end table
1967		2121
1968	Col = B<< C<< <x> - SPACE >> >>	2122	Col = B<< C<< <x> - SPACE >> >>
1969		2123
…		…
2046	=end table	2200	=end table
2047		2201
2048	=head1 CONFIGURE OPTIONS	2202	=head1 CONFIGURE OPTIONS
2049		2203
2050	General hint: if you get compile errors, then likely your configuration	2204	General hint: if you get compile errors, then likely your configuration
2051	hasn't been tested well. Either try with --enable-everything or use the	2205	hasn't been tested well. Either try with C<--enable-everything> or use
2052	./reconf script as a base for experiments. ./reconf is used by myself,	2206	the default configuration (i.e. C<--enable-xxx> or C<--disable-xxx>). Of
2053	so it should generally be a working config. Of course, you should always	2207	course, you should always report when a combination doesn't work, so it
2054	report when a combination doesn't work, so it can be fixed. Marc Lehmann	2208	can be fixed. Marc Lehmann <rxvt@schmorp.de>.
2055	<rxvt@schmorp.de>.	2209
		2210	All
2056		2211
2057	=over 4	2212	=over 4
2058		2213
2059	=item --enable-everything	2214	=item --enable-everything
2060		2215
2061	Add support for all non-multichoice options listed in "./configure	2216	Add (or remove) support for all non-multichoice options listed in "./configure
2062	--help". Note that unlike other enable options this is order dependant.	2217	--help".
		2218
2063	You can specify this and then disable options which this enables by	2219	You can specify this and then disable options you do not like by
2064	I<following> this with the appropriate commands.	2220	I<following> this with the appropriate C<--disable-...> arguments,
		2221	or you can start with a minimal configuration by specifying
		2222	C<--disable-everything> and than adding just the C<--enable-...> arguments
		2223	you want.
2065		2224
2066	=item --enable-xft	2225	=item --enable-xft (default: enabled)
2067		2226
2068	Add support for Xft (anti-aliases, among others) fonts. Xft fonts are	2227	Add support for Xft (anti-aliases, among others) fonts. Xft fonts are
2069	slower and require lots of memory, but as long as you don't use them, you	2228	slower and require lots of memory, but as long as you don't use them, you
2070	don't pay for them.	2229	don't pay for them.
2071		2230
2072	=item --enable-font-styles	2231	=item --enable-font-styles (default: on)
2073		2232
2074	Add support for B<bold>, I<italic> and B<< I<bold italic> >> font	2233	Add support for B<bold>, I<italic> and B<< I<bold italic> >> font
2075	styles. The fonts can be set manually or automatically.	2234	styles. The fonts can be set manually or automatically.
2076		2235
2077	=item --with-codesets=NAME,...	2236	=item --with-codesets=NAME,... (default: all)
2078		2237
2079	Compile in support for additional codeset (encoding) groups (eu, vn are	2238	Compile in support for additional codeset (encoding) groups (C<eu>, C<vn>
2080	always compiled in, which includes most 8-bit character sets). These	2239	are always compiled in, which includes most 8-bit character sets). These
2081	codeset tables are currently only used for driving X11 core fonts, they	2240	codeset tables are used for driving X11 core fonts, they are not required
2082	are not required for Xft fonts. Compiling them in will make your binary	2241	for Xft fonts, although having them compiled in lets rxvt-unicode choose
2083	bigger (together about 700kB), but it doesn't increase memory usage unless	2242	replacement fonts more intelligently. Compiling them in will make your
		2243	binary bigger (all of together cost about 700kB), but it doesn't increase
2084	you use an X11 font requiring one of these encodings.	2244	memory usage unless you use a font requiring one of these encodings.
2085		2245
2086	=begin table	2246	=begin table
2087		2247
2088	all all available codeset groups	2248	all all available codeset groups
2089	zh common chinese encodings	2249	zh common chinese encodings
2090	zh_ext rarely used but very big chinese encodigs	2250	zh_ext rarely used but very big chinese encodings
2091	jp common japanese encodings	2251	jp common japanese encodings
2092	jp_ext rarely used but big japanese encodings	2252	jp_ext rarely used but big japanese encodings
2093	kr korean encodings	2253	kr korean encodings
2094		2254
2095	=end table	2255	=end table
2096		2256
2097	=item --enable-xim	2257	=item --enable-xim (default: on)
2098		2258
2099	Add support for XIM (X Input Method) protocol. This allows using	2259	Add support for XIM (X Input Method) protocol. This allows using
2100	alternative input methods (e.g. kinput2) and will also correctly	2260	alternative input methods (e.g. kinput2) and will also correctly
2101	set up the input for people using dead keys or compose keys.	2261	set up the input for people using dead keys or compose keys.
2102		2262
2103	=item --enable-unicode3	2263	=item --enable-unicode3 (default: off)
		2264
		2265	Recommended to stay off unless you really need non-BMP characters.
2104		2266
2105	Enable direct support for displaying unicode codepoints above	2267	Enable direct support for displaying unicode codepoints above
2106	65535 (the basic multilingual page). This increases storage	2268	65535 (the basic multilingual page). This increases storage
2107	requirements per character from 2 to 4 bytes. X11 fonts do not yet	2269	requirements per character from 2 to 4 bytes. X11 fonts do not yet
2108	support these extra characters, but Xft does.	2270	support these extra characters, but Xft does.
2109		2271
2110	Please note that rxvt-unicode can store unicode code points >65535	2272	Please note that rxvt-unicode can store unicode code points >65535
2111	even without this flag, but the number of such characters is	2273	even without this flag, but the number of such characters is
2112	limited to a view thousand (shared with combining characters,	2274	limited to a few thousand (shared with combining characters,
2113	see next switch), and right now rxvt-unicode cannot display them	2275	see next switch), and right now rxvt-unicode cannot display them
2114	(input/output and cut&paste still work, though).	2276	(input/output and cut&paste still work, though).
2115		2277
2116	=item --enable-combining	2278	=item --enable-combining (default: on)
2117		2279
2118	Enable automatic composition of combining characters into	2280	Enable automatic composition of combining characters into
2119	composite characters. This is required for proper viewing of text	2281	composite characters. This is required for proper viewing of text
2120	where accents are encoded as seperate unicode characters. This is	2282	where accents are encoded as seperate unicode characters. This is
2121	done by using precomposited characters when available or creating	2283	done by using precomposited characters when available or creating
2122	new pseudo-characters when no precomposed form exists.	2284	new pseudo-characters when no precomposed form exists.
2123		2285
2124	Without --enable-unicode3, the number of additional precomposed	2286	Without --enable-unicode3, the number of additional precomposed
2125	characters is rather limited (2048, if this is full, rxvt will use the	2287	characters is somewhat limited (the 6400 private use characters will be
2126	private use area, extending the number of combinations to 8448). With	2288	(ab-)used). With --enable-unicode3, no practical limit exists.
2127	--enable-unicode3, no practical limit exists. This will also enable	2289
2128	storage of characters >65535.	2290	This option will also enable storage (but not display) of characters
		2291	beyond plane 0 (>65535) when --enable-unicode3 was not specified.
2129		2292
2130	The combining table also contains entries for arabic presentation forms,	2293	The combining table also contains entries for arabic presentation forms,
2131	but these are not currently used. Bug me if you want these to be used.	2294	but these are not currently used. Bug me if you want these to be used (and
		2295	tell me how these are to be used...).
2132		2296
2133	=item --enable-fallback(=CLASS)	2297	=item --enable-fallback(=CLASS) (default: Rxvt)
2134		2298
2135	When reading resource settings, also read settings for class CLASS	2299	When reading resource settings, also read settings for class CLASS. To
2136	(default: Rxvt). To disable resource fallback use --disable-fallback.	2300	disable resource fallback use --disable-fallback.
2137		2301
2138	=item --with-res-name=NAME	2302	=item --with-res-name=NAME (default: urxvt)
2139		2303
2140	Use the given name (default: urxvt) as default application name when	2304	Use the given name as default application name when
2141	reading resources. Specify --with-res-name=rxvt to replace rxvt.	2305	reading resources. Specify --with-res-name=rxvt to replace rxvt.
2142		2306
2143	=item --with-res-class=CLASS	2307	=item --with-res-class=CLASS /default: URxvt)
2144		2308
2145	Use the given class (default: URxvt) as default application class	2309	Use the given class as default application class
2146	when reading resources. Specify --with-res-class=Rxvt to replace	2310	when reading resources. Specify --with-res-class=Rxvt to replace
2147	rxvt.	2311	rxvt.
2148		2312
2149	=item --enable-utmp	2313	=item --enable-utmp (default: on)
2150		2314
2151	Write user and tty to utmp file (used by programs like F<w>) at	2315	Write user and tty to utmp file (used by programs like F<w>) at
2152	start of rxvt execution and delete information when rxvt exits.	2316	start of rxvt execution and delete information when rxvt exits.
2153		2317
2154	=item --enable-wtmp	2318	=item --enable-wtmp (default: on)
2155		2319
2156	Write user and tty to wtmp file (used by programs like F<last>) at	2320	Write user and tty to wtmp file (used by programs like F<last>) at
2157	start of rxvt execution and write logout when rxvt exits. This	2321	start of rxvt execution and write logout when rxvt exits. This
2158	option requires --enable-utmp to also be specified.	2322	option requires --enable-utmp to also be specified.
2159		2323
2160	=item --enable-lastlog	2324	=item --enable-lastlog (default: on)
2161		2325
2162	Write user and tty to lastlog file (used by programs like	2326	Write user and tty to lastlog file (used by programs like
2163	F<lastlogin>) at start of rxvt execution. This option requires	2327	F<lastlogin>) at start of rxvt execution. This option requires
2164	--enable-utmp to also be specified.	2328	--enable-utmp to also be specified.
2165		2329
2166	=item --enable-xpm-background	2330	=item --enable-xpm-background (default: on)
2167		2331
2168	Add support for XPM background pixmaps.	2332	Add support for XPM background pixmaps.
2169		2333
2170	=item --enable-transparency	2334	=item --enable-transparency (default: on)
2171		2335
2172	Add support for inheriting parent backgrounds thus giving a fake	2336	Add support for inheriting parent backgrounds thus giving a fake
2173	transparency to the term.	2337	transparency to the term.
2174		2338
2175	=item --enable-fading	2339	=item --enable-fading (default: on)
2176		2340
2177	Add support for fading the text when focus is lost.	2341	Add support for fading the text when focus is lost (requires C<--enable-transparency>).
2178		2342
2179	=item --enable-tinting	2343	=item --enable-tinting (default: on)
2180		2344
2181	Add support for tinting of transparent backgrounds.	2345	Add support for tinting of transparent backgrounds (requires C<--enable-transparency>).
2182		2346
2183	=item --enable-menubar
2184
2185	Add support for our menu bar system (this interacts badly with
2186	dynamic locale switching currently).
2187
2188	=item --enable-rxvt-scroll	2347	=item --enable-rxvt-scroll (default: on)
2189		2348
2190	Add support for the original rxvt scrollbar.	2349	Add support for the original rxvt scrollbar.
2191		2350
2192	=item --enable-next-scroll	2351	=item --enable-next-scroll (default: on)
2193		2352
2194	Add support for a NeXT-like scrollbar.	2353	Add support for a NeXT-like scrollbar.
2195		2354
2196	=item --enable-xterm-scroll	2355	=item --enable-xterm-scroll (default: on)
2197		2356
2198	Add support for an Xterm-like scrollbar.	2357	Add support for an Xterm-like scrollbar.
2199		2358
2200	=item --enable-plain-scroll	2359	=item --enable-plain-scroll (default: on)
2201		2360
2202	Add support for a very unobtrusive, plain-looking scrollbar that	2361	Add support for a very unobtrusive, plain-looking scrollbar that
2203	is the favourite of the rxvt-unicode author, having used it for	2362	is the favourite of the rxvt-unicode author, having used it for
2204	many years.	2363	many years.
2205		2364
2206	=item --enable-half-shadow	2365	=item --enable-ttygid (default: off)
2207
2208	Make shadows on the scrollbar only half the normal width & height.
2209	only applicable to rxvt scrollbars.
2210
2211	=item --enable-ttygid
2212		2366
2213	Change tty device setting to group "tty" - only use this if	2367	Change tty device setting to group "tty" - only use this if
2214	your system uses this type of security.	2368	your system uses this type of security.
2215		2369
2216	=item --disable-backspace-key	2370	=item --disable-backspace-key
2217		2371
2218	Disable any handling of the backspace key by us - let the X server	2372	Removes any handling of the backspace key by us - let the X server do it.
		2373
		2374	=item --disable-delete-key
		2375
		2376	Removes any handling of the delete key by us - let the X server
2219	do it.	2377	do it.
2220		2378
2221	=item --disable-delete-key
2222
2223	Disable any handling of the delete key by us - let the X server
2224	do it.
2225
2226	=item --disable-resources	2379	=item --disable-resources
2227		2380
2228	Remove all resources checking.	2381	Removes any support for resource checking.
2229
2230	=item --enable-xgetdefault
2231
2232	Make resources checking via XGetDefault() instead of our small
2233	version which only checks ~/.Xdefaults, or if that doesn't exist
2234	then ~/.Xresources.
2235
2236	=item --enable-strings
2237
2238	Add support for our possibly faster memset() function and other
2239	various routines, overriding your system's versions which may
2240	have been hand-crafted in assembly or may require extra libraries
2241	to link in. (this breaks ANSI-C rules and has problems on many
2242	GNU/Linux systems).
2243		2382
2244	=item --disable-swapscreen	2383	=item --disable-swapscreen
2245		2384
2246	Remove support for swap screen.	2385	Remove support for secondary/swap screen.
2247		2386
2248	=item --enable-frills	2387	=item --enable-frills (default: on)
2249		2388
2250	Add support for many small features that are not essential but nice to	2389	Add support for many small features that are not essential but nice to
2251	have. Normally you want this, but for very small binaries you may want to	2390	have. Normally you want this, but for very small binaries you may want to
2252	disable this.	2391	disable this.
2253		2392
		2393	A non-exhaustive list of features enabled by C<--enable-frills> (possibly
		2394	in combination with other switches) is:
		2395
		2396	MWM-hints
		2397	EWMH-hints (pid, utf8 names) and protocols (ping)
		2398	urgency hint
		2399	seperate underline colour (-underlineColor)
		2400	settable border widths and borderless switch (-w, -b, -bl)
		2401	visual depth selection (-depth)
		2402	settable extra linespacing /-lsp)
		2403	iso-14755 5.1 (basic) support
		2404	tripleclickwords (-tcw)
		2405	settable insecure mode (-insecure)
		2406	keysym remapping support
		2407	cursor blinking and underline cursor (-cb, -uc)
		2408	XEmbed support (-embed)
		2409	user-pty (-pty-fd)
		2410	hold on exit (-hold)
		2411	skip builtin block graphics (-sbg)
		2412	separate highlightcolor support (-hc)
		2413
		2414	It also enables some non-essential features otherwise disabled, such as:
		2415
		2416	some round-trip time optimisations
		2417	nearest color allocation on pseudocolor screens
		2418	UTF8_STRING support for selection
		2419	sgr modes 90..97 and 100..107
		2420	backindex and forwardindex escape sequences
		2421	view change/zero scrollback escape sequences
		2422	locale switching escape sequence
		2423	window op and some xterm/OSC escape sequences
		2424	rectangular selections
		2425	trailing space removal for selections
		2426	verbose X error handling
		2427
2254	=item --enable-iso14755	2428	=item --enable-iso14755 (default: on)
2255		2429
2256	Enable extended ISO 14755 support (see @@RXVT_NAME@@(1), or	2430	Enable extended ISO 14755 support (see @@RXVT_NAME@@(1), or
2257	F<doc/rxvt.1.txt>). Basic support (section 5.1) is enabled by	2431	F<doc/rxvt.1.txt>). Basic support (section 5.1) is enabled by
2258	C<--enable-frills>, while support for 5.2, 5.3 and 5.4 is enabled with	2432	C<--enable-frills>, while support for 5.2, 5.3 and 5.4 is enabled with
2259	this switch.	2433	this switch.
2260		2434
2261	=item --enable-linespace
2262
2263	Add support to provide user specified line spacing between text rows.
2264
2265	=item --enable-keepscrolling	2435	=item --enable-keepscrolling (default: on)
2266		2436
2267	Add support for continual scrolling of the display when you hold	2437	Add support for continual scrolling of the display when you hold
2268	the mouse button down on a scrollbar arrow.	2438	the mouse button down on a scrollbar arrow.
2269		2439
2270	=item --enable-mousewheel	2440	=item --enable-mousewheel (default: on)
2271		2441
2272	Add support for scrolling via mouse wheel or buttons 4 & 5.	2442	Add support for scrolling via mouse wheel or buttons 4 & 5.
2273		2443
2274	=item --enable-slipwheeling	2444	=item --enable-slipwheeling (default: on)
2275		2445
2276	Add support for continual scrolling (using the mouse wheel as an	2446	Add support for continual scrolling (using the mouse wheel as an
2277	accelerator) while the control key is held down. This option	2447	accelerator) while the control key is held down. This option
2278	requires --enable-mousewheel to also be specified.	2448	requires --enable-mousewheel to also be specified.
2279		2449
2280	=item --disable-new-selection
2281
2282	Remove support for mouse selection style like that of xterm.
2283
2284	=item --enable-dmalloc
2285
2286	Use Gray Watson's malloc - which is good for debugging See
2287	http://www.letters.com/dmalloc/ for details If you use either this or the
2288	next option, you may need to edit src/Makefile after compiling to point
2289	DINCLUDE and DLIB to the right places.
2290
2291	You can only use either this option and the following (should
2292	you use either) .
2293
2294	=item --enable-dlmalloc
2295
2296	Use Doug Lea's malloc - which is good for a production version
2297	See L<http://g.oswego.edu/dl/html/malloc.html> for details.
2298
2299	=item --enable-smart-resize	2450	=item --enable-smart-resize (default: on)
2300		2451
2301	Add smart growth/shrink behaviour when changing font size via from hot	2452	Add smart growth/shrink behaviour when changing font size via hot
2302	keys. This should keep in a fixed position the rxvt corner which is	2453	keys. This should keep the window corner which is closest to a corner of
2303	closest to a corner of the screen.	2454	the screen in a fixed position.
2304		2455
2305	=item --enable-cursor-blink
2306
2307	Add support for a blinking cursor.
2308
2309	=item --enable-pointer-blank	2456	=item --enable-pointer-blank (default: on)
2310		2457
2311	Add support to have the pointer disappear when typing or inactive.	2458	Add support to have the pointer disappear when typing or inactive.
2312		2459
2313	=item --with-name=NAME	2460	=item --enable-perl (default: on)
2314		2461
		2462	Enable an embedded perl interpreter. See the B<@@RXVT_NAME@@perl(3)>
		2463	manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the
		2464	files in F<src/perl-ext/> for the extensions that are installed by
		2465	default. The perl interpreter that is used can be specified via the
		2466	C<PERL> environment variable when running configure. Even when compiled
		2467	in, perl will I<not> be initialised when all extensions have been disabled
		2468	C<-pe "" --perl-ext-common "">, so it should be safe to enable from a
		2469	resource standpoint.
		2470
		2471	=item --with-name=NAME (default: urxvt)
		2472
2315	Set the basename for the installed binaries (default: urxvt, resulting in	2473	Set the basename for the installed binaries, resulting
2316	urxvt, urxvtd etc.). Specify --with-name=rxvt to replace rxvt.	2474	in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with
		2475	C<rxvt>.
2317		2476
2318	=item --with-term=NAME	2477	=item --with-term=NAME (default: rxvt-unicode)
2319		2478
2320	Change the environmental variable for the terminal to NAME (default	2479	Change the environmental variable for the terminal to NAME.
2321	"rxvt")
2322		2480
2323	=item --with-terminfo=PATH	2481	=item --with-terminfo=PATH
2324		2482
2325	Change the environmental variable for the path to the terminfo tree to	2483	Change the environmental variable for the path to the terminfo tree to
2326	PATH.	2484	PATH.

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines