ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/rxvt-unicode/doc/rxvt.7.pod

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.100 by root, Tue Jan 31 01:00:49 2006 UTC vs.
Revision 1.151 by sasha, Thu Nov 15 18:40:10 2007 UTC

…		…
17		17
18	This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting	18	This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting
19	all escape sequences, and other background information.	19	all escape sequences, and other background information.
20		20
21	The newest version of this document is also available on the World Wide Web at	21	The newest version of this document is also available on the World Wide Web at
22	L<http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>.	22	L<http://cvs.schmorp.de/browse/rxvt-unicode/doc/rxvt.7.html>.
23		23
24	=head1 FREQUENTLY ASKED QUESTIONS	24	=head1 RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS
25		25
26	=head2 The new selection selects pieces that are too big, how can I select
27	single words?
28		26
29	If you want to select e.g. alphanumeric words, you can use the following	27	=head2 Meta, Features & Commandline Issues
30	setting:
31		28
32	URxvt.selection.pattern-0: ([[:word:]]+)	29	=head3 My question isn't answered here, can I ask a human?
33		30
34	If you click more than twice, the selection will be extended	31	Before sending me mail, you could go to IRC: C<irc.freenode.net>,
35	more and more.	32	channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be
		33	interested in learning about new and exciting problems (but not FAQs :).
36		34
37	To get a selection that is very similar to the old code, try this pattern:	35	=head3 Does it support tabs, can I have a tabbed rxvt-unicode?
38		36
39	URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)	37	Beginning with version 7.3, there is a perl extension that implements a
		38	simple tabbed terminal. It is installed by default, so any of these should
		39	give you tabs:
40		40
41	Please also note that the I<LeftClick Shift-LeftClik> combination also	41	@@URXVT_NAME@@ -pe tabbed
42	selects words like the old code.
43		42
44	=head2 I don't like the new selection/popups/hotkeys/perl, how do I
45	change/disable it?
46
47	You can disable the perl extension completely by setting the
48	B<perl-ext-common> resource to the empty string, which also keeps
49	rxvt-unicode from initialising perl, saving memory.
50
51	If you only want to disable specific features, you first have to
52	identify which perl extension is responsible. For this, read the section
53	B<PREPACKAGED EXTENSIONS> in the @@RXVT_NAME@@perl(3) manpage. For
54	example, to disable the B<selection-popup> and B<option-popup>, specify
55	this B<perl-ext-common> resource:
56
57	URxvt.perl-ext-common: default,-selection-popup,-option-popup
58
59	This will keep the default extensions, but disable the two popup
60	extensions. Some extensions can also be configured, for example,
61	scrollback search mode is triggered by B<M-s>. You can move it to any
62	other combination either by setting the B<searchable-scrollback> resource:
63
64	URxvt.searchable-scrollback: CM-s
65
66	=head3 The cursor moves when selecting text in the current input line, how
67	do I switch this off?
68
69	See next entry.
70
71	=head2 During rlogin/ssh/telnet/etc. sessions, clicking near the cursor
72	outputs strange escape sequences, how do I fix this?
73
74	These are caused by the C<readline> perl extension. Under normal
75	circumstances, it will move your cursor around when you click into the
76	line that contains it. It tries hard not to do this at the wrong moment,
77	but when running a program that doesn't parse cursor movements or in some
78	cases during rlogin sessions, it fails to detect this properly.
79
80	You can permamently switch this feature off by disabling the C<readline>
81	extension:
82
83	URxvt.perl-ext-common: default,-readline	43	URxvt.perl-ext-common: default,tabbed
84		44
85	=head2 Why doesn't rxvt-unicode read my resources?	45	It will also work fine with tabbing functionality of many window managers
		46	or similar tabbing programs, and its embedding-features allow it to be
		47	embedded into other programs, as witnessed by F<doc/rxvt-tabbed> or
		48	the upcoming C<Gtk2::URxvt> perl module, which features a tabbed urxvt
		49	(murxvt) terminal as an example embedding application.
86		50
87	Well, why, indeed? It does, in a way very similar to other X	51	=head3 How do I know which rxvt-unicode version I'm using?
88	applications. Most importantly, this means that if you or your OS loads
89	resources into the X display (the right way to do it), rxvt-unicode will
90	ignore any resource files in your home directory. It will only read
91	F<$HOME/.Xdefaults> when no resources are attached to the display.
92		52
93	If you have or use an F<$HOME/.Xresources> file, chances are that	53	The version number is displayed with the usage (-h). Also the escape
94	resources are loaded into your X-server. In this case, you have to	54	sequence C<ESC [ 8 n> sets the window title to the version number. When
95	re-login after every change (or run F<xrdb -merge $HOME/.Xresources>).	55	using the @@URXVT_NAME@@c client, the version displayed is that of the
		56	daemon.
96		57
97	Also consider the form resources have to use:	58	=head3 Rxvt-unicode uses gobs of memory, how can I reduce that?
98		59
99	URxvt.resource: value	60	Rxvt-unicode tries to obey the rule of not charging you for something you
		61	don't use. One thing you should try is to configure out all settings that
		62	you don't need, for example, Xft support is a resource hog by design,
		63	when used. Compiling it out ensures that no Xft font will be loaded
		64	accidentally when rxvt-unicode tries to find a font for your characters.
100		65
101	If you want to use another form (there are lots of different ways of	66	Also, many people (me included) like large windows and even larger
102	specifying resources), make sure you understand wether and why it	67	scrollback buffers: Without C<--enable-unicode3>, rxvt-unicode will use
103	works. If unsure, use the form above.	68	6 bytes per screen cell. For a 160x?? window this amounts to almost a
		69	kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
		70	use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
		71	rxvt-unicode then uses 8 bytes per screen cell.
104		72
105	=head2 I can't get transparency working, what am I doing wrong?	73	=head3 How can I start @@URXVT_NAME@@d in a race-free way?
106		74
107	First of all, transparency isn't officially supported in rxvt-unicode, so	75	Try C<@@URXVT_NAME@@d -f -o>, which tells @@URXVT_NAME@@d to open the
108	you are mostly on your own. Do not bug the author about it (but you may	76	display, create the listening socket and then fork.
109	bug everybody else). Also, if you can't get it working consider it a rite
110	of passage: ... and you failed.
111		77
112	Here are four ways to get transparency. B<Do> read the manpage and option	78	=head3 How can I start @@URXVT_NAME@@d automatically when I run @@URXVT_NAME@@c?
113	descriptions for the programs mentioned and rxvt-unicode. Really, do it!
114		79
115	1. Use inheritPixmap:	80	If you want to start @@URXVT_NAME@@d automatically whenever you run
		81	@@URXVT_NAME@@c and the daemon isn't running yet, use this script:
116		82
117	Esetroot wallpaper.jpg	83	#!/bin/sh
118	@@RXVT_NAME@@ -ip -tint red -sh 40	84	@@URXVT_NAME@@c "$@"
		85	if [ $? -eq 2 ]; then
		86	@@URXVT_NAME@@d -q -o -f
		87	@@URXVT_NAME@@c "$@"
		88	fi
119		89
120	That works. If you think it doesn't, you lack transparency and tinting	90	This tries to create a new terminal, and if fails with exit status 2,
121	support, or you are unable to read.	91	meaning it couldn't connect to the daemon, it will start the daemon and
		92	re-run the command. Subsequent invocations of the script will re-use the
		93	existing daemon.
122		94
123	2. Use a simple pixmap and emulate pseudo-transparency. This enables you	95	=head3 How do I distinguish whether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.
124	to use effects other than tinting and shading: Just shade/tint/whatever
125	your picture with gimp:
126		96
127	convert wallpaper.jpg -blur 20x20 -modulate 30 background.xpm	97	The original rxvt and rxvt-unicode always export the variable "COLORTERM",
128	@@RXVT_NAME@@ -pixmap background.xpm -pe automove-background	98	so you can check and see if that is set. Note that several programs, JED,
		99	slrn, Midnight Commander automatically check this variable to decide
		100	whether or not to use color.
129		101
130	That works. If you think it doesn't, you lack XPM and Perl support, or you	102	=head3 How do I set the correct, full IP address for the DISPLAY variable?
131	are unable to read.
132		103
133	3. Use an ARGB visual:	104	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
		105	insecure mode then it is possible to use the following shell script
		106	snippets to correctly set the display. If your version of rxvt-unicode
		107	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
		108	the COLORTERM variable can be used to distinguish rxvt-unicode from a
		109	regular xterm.
134		110
135	@@RXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc	111	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
		112	snippets:
136		113
137	This requires XFT support, and the support of your X-server. If that	114	# Bourne/Korn/POSIX family of shells:
138	doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't	115	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
139	there yet, no matter what they claim. Rxvt-Unicode contains the neccessary	116	if [ ${TERM:-foo} = xterm ]; then
140	bugfixes and workarounds for Xft and Xlib to make it work, but that	117	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
141	doesn't mean that your WM has the required kludges in place.	118	echo -n '^[Z'
		119	read term_id
		120	stty icanon echo
		121	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
		122	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
		123	read DISPLAY # set it in our local shell
		124	fi
		125	fi
142		126
143	4. Use xcompmgr and let it do the job:	127	=head3 How do I compile the manual pages on my own?
144		128
145	xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \	129	You need to have a recent version of perl installed as F</usr/bin/perl>,
146	-set _NET_WM_WINDOW_OPACITY 0xc0000000	130	one that comes with F<pod2man>, F<pod2text> and F<pod2xhtml> (from
		131	F<Pod::Xhtml>). Then go to the doc subdirectory and enter C<make alldoc>.
147		132
148	Then click on a window you want to make transparent. Replace C<0xc0000000>
149	by other values to change the degree of opacity. If it doesn't work and
150	your server crashes, you got to keep the pieces.
151
152	=head2 Isn't rxvt supposed to be small? Don't all those features bloat?	133	=head3 Isn't rxvt-unicode supposed to be small? Don't all those features bloat?
153		134
154	I often get asked about this, and I think, no, they didn't cause extra	135	I often get asked about this, and I think, no, they didn't cause extra
155	bloat. If you compare a minimal rxvt and a minimal urxvt, you can see	136	bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
156	that the urxvt binary is larger (due to some encoding tables always being	137	that the urxvt binary is larger (due to some encoding tables always being
157	compiled in), but it actually uses less memory (RSS) after startup. Even	138	compiled in), but it actually uses less memory (RSS) after startup. Even
…		…
161		142
162	text data bss drs rss filename	143	text data bss drs rss filename
163	98398 1664 24 15695 1824 rxvt --disable-everything	144	98398 1664 24 15695 1824 rxvt --disable-everything
164	188985 9048 66616 18222 1788 urxvt --disable-everything	145	188985 9048 66616 18222 1788 urxvt --disable-everything
165		146
166	When you C<--enable-everything> (which _is_ unfair, as this involves xft	147	When you C<--enable-everything> (which I<is> unfair, as this involves xft
167	and full locale/XIM support which are quite bloaty inside libX11 and my	148	and full locale/XIM support which are quite bloaty inside libX11 and my
168	libc), the two diverge, but not unreasnobaly so.	149	libc), the two diverge, but not unreasonably so.
169		150
170	text data bss drs rss filename	151	text data bss drs rss filename
171	163431 2152 24 20123 2060 rxvt --enable-everything	152	163431 2152 24 20123 2060 rxvt --enable-everything
172	1035683 49680 66648 29096 3680 urxvt --enable-everything	153	1035683 49680 66648 29096 3680 urxvt --enable-everything
173		154
…		…
189	(21152k + extra 4204k in separate processes) or konsole (22200k + extra	170	(21152k + extra 4204k in separate processes) or konsole (22200k + extra
190	43180k in daemons that stay around after exit, plus half a minute of	171	43180k in daemons that stay around after exit, plus half a minute of
191	startup time, including the hundreds of warnings it spits out), it fares	172	startup time, including the hundreds of warnings it spits out), it fares
192	extremely well *g*.	173	extremely well *g*.
193		174
194	=head2 Why C++, isn't that unportable/bloated/uncool?	175	=head3 Why C++, isn't that unportable/bloated/uncool?
195		176
196	Is this a question? :) It comes up very often. The simple answer is: I had	177	Is this a question? :) It comes up very often. The simple answer is: I had
197	to write it, and C++ allowed me to write and maintain it in a fraction	178	to write it, and C++ allowed me to write and maintain it in a fraction
198	of the time and effort (which is a scarce resource for me). Put even	179	of the time and effort (which is a scarce resource for me). Put even
199	shorter: It simply wouldn't exist without C++.	180	shorter: It simply wouldn't exist without C++.
…		…
216		197
217	And here is rxvt-unicode:	198	And here is rxvt-unicode:
218		199
219	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)	200	libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
220	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)	201	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
221	libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)	202	libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
222	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)	203	libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
223	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)	204	/lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
224		205
225	No large bloated libraries (of course, none were linked in statically),	206	No large bloated libraries (of course, none were linked in statically),
226	except maybe libX11 :)	207	except maybe libX11 :)
227		208
228	=head2 Does it support tabs, can I have a tabbed rxvt-unicode?
229		209
230	Beginning with version 7.3, there is a perl extension that implements a	210	=head2 Rendering, Font & Look and Feel Issues
231	simple tabbed terminal. It is installed by default, so any of these should
232	give you tabs:
233		211
234	@@RXVT_NAME@@ -pe tabbed	212	=head3 I can't get transparency working, what am I doing wrong?
235		213
		214	First of all, please address all transparency related issues to Sasha Vasko at
		215	sasha@aftercode.net and do not bug the author about it. Also, if you can't
		216	get it working consider it a rite of passage: ... and you failed.
		217
		218	Here are four ways to get transparency. B<Do> read the manpage and option
		219	descriptions for the programs mentioned and rxvt-unicode. Really, do it!
		220
		221	1. Use transparent mode:
		222
		223	Esetroot wallpaper.jpg
		224	@@URXVT_NAME@@ -tr -tint red -sh 40
		225
		226	That works. If you think it doesn't, you lack transparency and tinting
		227	support, or you are unable to read.
		228
		229	2. Use a simple pixmap and emulate pseudo-transparency. This enables you
		230	to use effects other than tinting and shading: Just shade/tint/whatever
		231	your picture with gimp or any other tool:
		232
		233	convert wallpaper.jpg -blur 20x20 -modulate 30 background.jpg
		234	@@URXVT_NAME@@ -pixmap "background.jpg;:root"
		235
		236	That works. If you think it doesn't, you lack AfterImage support, or you
		237	are unable to read.
		238
		239	3. Use an ARGB visual:
		240
		241	@@URXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
		242
		243	This requires XFT support, and the support of your X-server. If that
		244	doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
		245	there yet, no matter what they claim. Rxvt-Unicode contains the necessary
		246	bugfixes and workarounds for Xft and Xlib to make it work, but that
		247	doesn't mean that your WM has the required kludges in place.
		248
		249	4. Use xcompmgr and let it do the job:
		250
		251	xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \
		252	-set _NET_WM_WINDOW_OPACITY 0xc0000000
		253
		254	Then click on a window you want to make transparent. Replace C<0xc0000000>
		255	by other values to change the degree of opacity. If it doesn't work and
		256	your server crashes, you got to keep the pieces.
		257
		258	=head3 Why does rxvt-unicode sometimes leave pixel droppings?
		259
		260	Most fonts were not designed for terminal use, which means that character
		261	size varies a lot. A font that is otherwise fine for terminal use might
		262	contain some characters that are simply too wide. Rxvt-unicode will avoid
		263	these characters. For characters that are just "a bit" too wide a special
		264	"careful" rendering mode is used that redraws adjacent characters.
		265
		266	All of this requires that fonts do not lie about character sizes,
		267	however: Xft fonts often draw glyphs larger than their acclaimed bounding
		268	box, and rxvt-unicode has no way of detecting this (the correct way is to
		269	ask for the character bounding box, which unfortunately is wrong in these
		270	cases).
		271
		272	It's not clear (to me at least), whether this is a bug in Xft, freetype,
		273	or the respective font. If you encounter this problem you might try using
		274	the C<-lsp> option to give the font more height. If that doesn't work, you
		275	might be forced to use a different font.
		276
		277	All of this is not a problem when using X11 core fonts, as their bounding
		278	box data is correct.
		279
		280	=head3 How can I keep rxvt-unicode from using reverse video so much?
		281
		282	First of all, make sure you are running with the right terminal settings
		283	(C<TERM=rxvt-unicode>), which will get rid of most of these effects. Then
		284	make sure you have specified colours for italic and bold, as otherwise
		285	rxvt-unicode might use reverse video to simulate the effect:
		286
		287	URxvt.colorBD: white
		288	URxvt.colorIT: green
		289
		290	=head3 Some programs assume totally weird colours (red instead of blue), how can I fix that?
		291
		292	For some unexplainable reason, some rare programs assume a very weird
		293	colour palette when confronted with a terminal with more than the standard
		294	8 colours (rxvt-unicode supports 88). The right fix is, of course, to fix
		295	these programs not to assume non-ISO colours without very good reasons.
		296
		297	In the meantime, you can either edit your C<rxvt-unicode> terminfo
		298	definition to only claim 8 colour support or use C<TERM=rxvt>, which will
		299	fix colours but keep you from using other rxvt-unicode features.
		300
		301	=head3 Can I switch the fonts at runtime?
		302
		303	Yes, using an escape sequence. Try something like this, which has the same
		304	effect as using the C<-fn> switch, and takes effect immediately:
		305
		306	printf '\33]50;%s\007' "9x15bold,xft:Kochi Gothic"
		307
		308	This is useful if you e.g. work primarily with japanese (and prefer a
		309	japanese font), but you have to switch to chinese temporarily, where
		310	japanese fonts would only be in your way.
		311
		312	You can think of this as a kind of manual ISO-2022 switching.
		313
		314	=head3 Why do italic characters look as if clipped?
		315
		316	Many fonts have difficulties with italic characters and hinting. For
		317	example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
		318	Mono> completely fails in its italic face. A workaround might be to
		319	enable freetype autohinting, i.e. like this:
		320
		321	URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
		322	URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
		323
		324	=head3 Can I speed up Xft rendering somehow?
		325
		326	Yes, the most obvious way to speed it up is to avoid Xft entirely, as
		327	it is simply slow. If you still want Xft fonts you might try to disable
		328	antialiasing (by appending C<:antialias=false>), which saves lots of
		329	memory and also speeds up rendering considerably.
		330
		331	=head3 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
		332
		333	Rxvt-unicode will use whatever you specify as a font. If it needs to
		334	fall back to its default font search list it will prefer X11 core
		335	fonts, because they are small and fast, and then use Xft fonts. It has
		336	antialiasing disabled for most of them, because the author thinks they
		337	look best that way.
		338
		339	If you want antialiasing, you have to specify the fonts manually.
		340
		341	=head3 What's with this bold/blink stuff?
		342
		343	If no bold colour is set via C<colorBD:>, bold will invert text using the
		344	standard foreground colour.
		345
		346	For the standard background colour, blinking will actually make the
		347	text blink when compiled with C<--enable-blinking>. with standard
		348	colours. Without C<--enable-blinking>, the blink attribute will be
		349	ignored.
		350
		351	On ANSI colours, bold/blink attributes are used to set high-intensity
		352	foreground/background colors.
		353
		354	color0-7 are the low-intensity colors.
		355
		356	color8-15 are the corresponding high-intensity colors.
		357
		358	=head3 I don't like the screen colors. How do I change them?
		359
		360	You can change the screen colors at run-time using F<~/.Xdefaults>
		361	resources (or as long-options).
		362
		363	Here are values that are supposed to resemble a VGA screen,
		364	including the murky brown that passes for low-intensity yellow:
		365
		366	URxvt.color0: #000000
		367	URxvt.color1: #A80000
		368	URxvt.color2: #00A800
		369	URxvt.color3: #A8A800
		370	URxvt.color4: #0000A8
		371	URxvt.color5: #A800A8
		372	URxvt.color6: #00A8A8
		373	URxvt.color7: #A8A8A8
		374
		375	URxvt.color8: #000054
		376	URxvt.color9: #FF0054
		377	URxvt.color10: #00FF54
		378	URxvt.color11: #FFFF54
		379	URxvt.color12: #0000FF
		380	URxvt.color13: #FF00FF
		381	URxvt.color14: #00FFFF
		382	URxvt.color15: #FFFFFF
		383
		384	And here is a more complete set of non-standard colors.
		385
		386	URxvt.cursorColor: #dc74d1
		387	URxvt.pointerColor: #dc74d1
		388	URxvt.background: #0e0e0e
		389	URxvt.foreground: #4ad5e1
		390	URxvt.color0: #000000
		391	URxvt.color8: #8b8f93
		392	URxvt.color1: #dc74d1
		393	URxvt.color9: #dc74d1
		394	URxvt.color2: #0eb8c7
		395	URxvt.color10: #0eb8c7
		396	URxvt.color3: #dfe37e
		397	URxvt.color11: #dfe37e
		398	URxvt.color5: #9e88f0
		399	URxvt.color13: #9e88f0
		400	URxvt.color6: #73f7ff
		401	URxvt.color14: #73f7ff
		402	URxvt.color7: #e1dddd
		403	URxvt.color15: #e1dddd
		404
		405	They have been described (not by me) as "pretty girly".
		406
		407	=head3 Why do some characters look so much different than others?
		408
		409	See next entry.
		410
		411	=head3 How does rxvt-unicode choose fonts?
		412
		413	Most fonts do not contain the full range of Unicode, which is
		414	fine. Chances are that the font you (or the admin/package maintainer of
		415	your system/os) have specified does not cover all the characters you want
		416	to display.
		417
		418	B<rxvt-unicode> makes a best-effort try at finding a replacement
		419	font. Often the result is fine, but sometimes the chosen font looks
		420	bad/ugly/wrong. Some fonts have totally strange characters that don't
		421	resemble the correct glyph at all, and rxvt-unicode lacks the artificial
		422	intelligence to detect that a specific glyph is wrong: it has to believe
		423	the font that the characters it claims to contain indeed look correct.
		424
		425	In that case, select a font of your taste and add it to the font list,
		426	e.g.:
		427
		428	@@URXVT_NAME@@ -fn basefont,font2,font3...
		429
		430	When rxvt-unicode sees a character, it will first look at the base
		431	font. If the base font does not contain the character, it will go to the
		432	next font, and so on. Specifying your own fonts will also speed up this
		433	search and use less resources within rxvt-unicode and the X-server.
		434
		435	The only limitation is that none of the fonts may be larger than the base
		436	font, as the base font defines the terminal character cell size, which
		437	must be the same due to the way terminals work.
		438
		439	=head3 Why do some chinese characters look so different than others?
		440
		441	This is because there is a difference between script and language --
		442	rxvt-unicode does not know which language the text that is output is,
		443	as it only knows the unicode character codes. If rxvt-unicode first
		444	sees a japanese/chinese character, it might choose a japanese font for
		445	display. Subsequent japanese characters will use that font. Now, many
		446	chinese characters aren't represented in japanese fonts, so when the first
		447	non-japanese character comes up, rxvt-unicode will look for a chinese font
		448	-- unfortunately at this point, it will still use the japanese font for
		449	chinese characters that are also in the japanese font.
		450
		451	The workaround is easy: just tag a chinese font at the end of your font
		452	list (see the previous question). The key is to view the font list as
		453	a preference list: If you expect more japanese, list a japanese font
		454	first. If you expect more chinese, put a chinese font first.
		455
		456	In the future it might be possible to switch language preferences at
		457	runtime (the internal data structure has no problem with using different
		458	fonts for the same character at the same time, but no interface for this
		459	has been designed yet).
		460
		461	Until then, you might get away with switching fonts at runtime (see L<Can
		462	I switch the fonts at runtime?> later in this document).
		463
		464	=head3 How can I make mplayer display video correctly?
		465
		466	We are working on it, in the meantime, as a workaround, use something like:
		467
		468	@@URXVT_NAME@@ -b 600 -geometry 20x1 -e sh -c 'mplayer -wid $WINDOWID file...'
		469
		470
		471	=head2 Keyboard, Mouse & User Interaction
		472
		473	=head3 The new selection selects pieces that are too big, how can I select single words?
		474
		475	If you want to select e.g. alphanumeric words, you can use the following
		476	setting:
		477
		478	URxvt.selection.pattern-0: ([[:word:]]+)
		479
		480	If you click more than twice, the selection will be extended
		481	more and more.
		482
		483	To get a selection that is very similar to the old code, try this pattern:
		484
		485	URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
		486
		487	Please also note that the I<LeftClick Shift-LeftClik> combination also
		488	selects words like the old code.
		489
		490	=head3 I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
		491
		492	You can disable the perl extension completely by setting the
		493	B<perl-ext-common> resource to the empty string, which also keeps
		494	rxvt-unicode from initialising perl, saving memory.
		495
		496	If you only want to disable specific features, you first have to
		497	identify which perl extension is responsible. For this, read the section
		498	B<PREPACKAGED EXTENSIONS> in the @@URXVT_NAME@@perl(3) manpage. For
		499	example, to disable the B<selection-popup> and B<option-popup>, specify
		500	this B<perl-ext-common> resource:
		501
		502	URxvt.perl-ext-common: default,-selection-popup,-option-popup
		503
		504	This will keep the default extensions, but disable the two popup
		505	extensions. Some extensions can also be configured, for example,
		506	scrollback search mode is triggered by B<M-s>. You can move it to any
		507	other combination either by setting the B<searchable-scrollback> resource:
		508
		509	URxvt.searchable-scrollback: CM-s
		510
		511	=head3 The cursor moves when selecting text in the current input line, how do I switch this off?
		512
		513	See next entry.
		514
		515	=head3 During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?
		516
		517	These are caused by the C<readline> perl extension. Under normal
		518	circumstances, it will move your cursor around when you click into the
		519	line that contains it. It tries hard not to do this at the wrong moment,
		520	but when running a program that doesn't parse cursor movements or in some
		521	cases during rlogin sessions, it fails to detect this properly.
		522
		523	You can permanently switch this feature off by disabling the C<readline>
		524	extension:
		525
236	URxvt.perl-ext-common: default,tabbed	526	URxvt.perl-ext-common: default,-readline
237		527
238	It will also work fine with tabbing functionality of many window managers	528	=head3 My numerical keypad acts weird and generates differing output?
239	or similar tabbing programs, and its embedding-features allow it to be
240	embedded into other programs, as witnessed by F<doc/rxvt-tabbed> or
241	the upcoming C<Gtk2::URxvt> perl module, which features a tabbed urxvt
242	(murxvt) terminal as an example embedding application.
243		529
244	=head2 How do I know which rxvt-unicode version I'm using?	530	Some Debian GNUL/Linux users seem to have this problem, although no
		531	specific details were reported so far. It is possible that this is caused
		532	by the wrong C<TERM> setting, although the details of whether and how
		533	this can happen are unknown, as C<TERM=rxvt> should offer a compatible
		534	keymap. See the answer to the previous question, and please report if that
		535	helped.
245		536
246	The version number is displayed with the usage (-h). Also the escape	537	=head3 My Compose (Multi_key) key is no longer working.
247	sequence C<ESC [ 8 n> sets the window title to the version number. When
248	using the @@RXVT_NAME@@c client, the version displayed is that of the
249	daemon.
250		538
251	=head2 I am using Debian GNU/Linux and have a problem...	539	The most common causes for this are that either your locale is not set
		540	correctly, or you specified a B<preeditStyle> that is not supported by
		541	your input method. For example, if you specified B<OverTheSpot> and
		542	your input method (e.g. the default input method handling Compose keys)
		543	does not support this (for instance because it is not visual), then
		544	rxvt-unicode will continue without an input method.
252		545
253	The Debian GNU/Linux package of rxvt-unicode in sarge contains large	546	In this case either do not specify a B<preeditStyle> or specify more than
254	patches that considerably change the behaviour of rxvt-unicode (but	547	one pre-edit style, such as B<OverTheSpot,Root,None>.
255	unfortunately this notice has been removed). Before reporting a bug to
256	the original rxvt-unicode author please download and install the genuine
257	version (L<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
258	the problem. If you cannot, chances are that the problems are specific to
259	Debian GNU/Linux, in which case it should be reported via the Debian Bug
260	Tracking System (use C<reportbug> to report the bug).
261		548
262	For other problems that also affect the Debian package, you can and	549	=head3 I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755
263	probably should use the Debian BTS, too, because, after all, it's also a
264	bug in the Debian version and it serves as a reminder for other users that
265	might encounter the same issue.
266		550
267	=head2 I am maintaining rxvt-unicode for distribution/OS XXX, any	551	Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on
268	recommendation?	552	international keyboards) or simply use ISO 14755 support to your
		553	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other
		554	codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape
		555	character and so on.
269		556
270	You should build one binary with the default options. F<configure>	557	=head3 Mouse cut/paste suddenly no longer works.
271	now enables most useful options, and the trend goes to making them
272	runtime-switchable, too, so there is usually no drawback to enbaling them,
273	except higher disk and possibly memory usage. The perl interpreter should
274	be enabled, as important functionality (menus, selection, likely more in
275	the future) depends on it.
276		558
277	You should not overwrite the C<perl-ext-common> snd C<perl-ext> resources	559	Make sure that mouse reporting is actually turned off since killing
278	system-wide (except maybe with C<defaults>). This will result in useful	560	some editors prematurely may leave the mouse in mouse report mode. I've
279	behaviour. If your distribution aims at low memory, add an empty	561	heard that tcsh may use mouse reporting unless it otherwise specified. A
280	C<perl-ext-common> resource to the app-defaults file. This will keep the	562	quick check is to see if cut/paste works when the Alt or Shift keys are
281	perl interpreter disabled until the user enables it.	563	depressed.
282		564
283	If you can/want build more binaries, I recommend building a minimal	565	=head3 What's with the strange Backspace/Delete key behaviour?
284	one with C<--disable-everything> (very useful) and a maximal one with
285	C<--enable-everything> (less useful, it will be very big due to a lot of
286	encodings built-in that increase download times and are rarely used).
287		566
288	=head2 I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?	567	Assuming that the physical Backspace key corresponds to the
		568	Backspace keysym (not likely for Linux ... see the following
		569	question) there are two standard values that can be used for
		570	Backspace: C<^H> and C<^?>.
289		571
290	It should be, starting with release 7.1. You are encouraged to properly	572	Historically, either value is correct, but rxvt-unicode adopts the debian
291	install urxvt with privileges necessary for your OS now.	573	policy of using C<^?> when unsure, because it's the one and only correct
		574	choice :).
292		575
293	When rxvt-unicode detects that it runs setuid or setgid, it will fork	576	Rxvt-unicode tries to inherit the current stty settings and uses the value
294	into a helper process for privileged operations (pty handling on some	577	of `erase' to guess the value for backspace. If rxvt-unicode wasn't
295	systems, utmp/wtmp/lastlog handling on others) and drop privileges	578	started from a terminal (say, from a menu or by remote shell), then the
296	immediately. This is much safer than most other terminals that keep	579	system value of `erase', which corresponds to CERASE in <termios.h>, will
297	privileges while running (but is more relevant to urxvt, as it contains	580	be used (which may not be the same as your stty setting).
298	things as perl interpreters, which might be "helpful" to attackers).
299		581
300	This forking is done as the very first within main(), which is very early	582	For starting a new rxvt-unicode:
301	and reduces possible bugs to initialisation code run before main(), or
302	things like the dynamic loader of your system, which should result in very
303	little risk.
304		583
		584	# use Backspace = ^H
		585	$ stty erase ^H
		586	$ @@URXVT_NAME@@
		587
		588	# use Backspace = ^?
		589	$ stty erase ^?
		590	$ @@URXVT_NAME@@
		591
		592	Toggle with C<ESC [ 36 h> / C<ESC [ 36 l>.
		593
		594	For an existing rxvt-unicode:
		595
		596	# use Backspace = ^H
		597	$ stty erase ^H
		598	$ echo -n "^[[36h"
		599
		600	# use Backspace = ^?
		601	$ stty erase ^?
		602	$ echo -n "^[[36l"
		603
		604	This helps satisfy some of the Backspace discrepancies that occur, but
		605	if you use Backspace = C<^H>, make sure that the termcap/terminfo value
		606	properly reflects that.
		607
		608	The Delete key is a another casualty of the ill-defined Backspace problem.
		609	To avoid confusion between the Backspace and Delete keys, the Delete
		610	key has been assigned an escape sequence to match the vt100 for Execute
		611	(C<ESC [ 3 ~>) and is in the supplied termcap/terminfo.
		612
		613	Some other Backspace problems:
		614
		615	some editors use termcap/terminfo,
		616	some editors (vim I'm told) expect Backspace = ^H,
		617	GNU Emacs (and Emacs-like editors) use ^H for help.
		618
		619	Perhaps someday this will all be resolved in a consistent manner.
		620
		621	=head3 I don't like the key-bindings. How do I change them?
		622
		623	There are some compile-time selections available via configure. Unless
		624	you have run "configure" with the C<--disable-resources> option you can
		625	use the `keysym' resource to alter the keystrings associated with keysyms.
		626
		627	Here's an example for a URxvt session started using C<@@URXVT_NAME@@ -name URxvt>
		628
		629	URxvt.keysym.Home: \033[1~
		630	URxvt.keysym.End: \033[4~
		631	URxvt.keysym.C-apostrophe: \033<C-'>
		632	URxvt.keysym.C-slash: \033<C-/>
		633	URxvt.keysym.C-semicolon: \033<C-;>
		634	URxvt.keysym.C-grave: \033<C-`>
		635	URxvt.keysym.C-comma: \033<C-,>
		636	URxvt.keysym.C-period: \033<C-.>
		637	URxvt.keysym.C-0x60: \033<C-`>
		638	URxvt.keysym.C-Tab: \033<C-Tab>
		639	URxvt.keysym.C-Return: \033<C-Return>
		640	URxvt.keysym.S-Return: \033<S-Return>
		641	URxvt.keysym.S-space: \033<S-Space>
		642	URxvt.keysym.M-Up: \033<M-Up>
		643	URxvt.keysym.M-Down: \033<M-Down>
		644	URxvt.keysym.M-Left: \033<M-Left>
		645	URxvt.keysym.M-Right: \033<M-Right>
		646	URxvt.keysym.M-C-0: list \033<M-C- 0123456789 >
		647	URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz >
		648	URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007
		649
		650	See some more examples in the documentation for the B<keysym> resource.
		651
		652	=head3 I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map
		653
		654	KP_Insert == Insert
		655	F22 == Print
		656	F27 == Home
		657	F29 == Prior
		658	F33 == End
		659	F35 == Next
		660
		661	Rather than have rxvt-unicode try to accommodate all the various possible
		662	keyboard mappings, it is better to use `xmodmap' to remap the keys as
		663	required for your particular machine.
		664
		665
		666	=head2 Terminal Configuration
		667
		668	=head3 Can I see a typical configuration?
		669
		670	The default configuration tries to be xterm-like, which I don't like that
		671	much, but it's least surprise to regular users.
		672
		673	As a rxvt or rxvt-unicode user, you are practically supposed to invest
		674	time into customising your terminal. To get you started, here is the
		675	author's .Xdefaults entries, with comments on what they do. It's certainly
		676	not I<typical>, but what's typical...
		677
		678	URxvt.cutchars: "()*,<>[]{}|'
		679	URxvt.print-pipe: cat >/tmp/xxx
		680
		681	These are just for testing stuff.
		682
		683	URxvt.imLocale: ja_JP.UTF-8
		684	URxvt.preeditType: OnTheSpot,None
		685
		686	This tells rxvt-unicode to use a special locale when communicating with
		687	the X Input Method, and also tells it to only use the OnTheSpot pre-edit
		688	type, which requires the C<xim-onthespot> perl extension but rewards me
		689	with correct-looking fonts.
		690
		691	URxvt.perl-lib: /root/lib/urxvt
		692	URxvt.perl-ext-common: default,selection-autotransform,selection-pastebin,xim-onthespot,remote-clipboard
		693	URxvt.selection.pattern-0: ( at .*? line \\d+)
		694	URxvt.selection.pattern-1: ^(/[^:]+):\
		695	URxvt.selection-autotransform.0: s/^([^:[:space:]]+):(\\d+):?$/:e \\Q$1\\E\\x0d:$2\\x0d/
		696	URxvt.selection-autotransform.1: s/^ at (.*?) line (\\d+)$/:e \\Q$1\\E\\x0d:$2\\x0d/
		697
		698	This is my perl configuration. The first two set the perl library
		699	directory and also tells urxvt to use a large number of extensions. I
		700	develop for myself mostly, so I actually use most of the extensions I
		701	write.
		702
		703	The selection stuff mainly makes the selection perl-error-message aware
		704	and tells it to convert perl error messages into vi-commands to load the
		705	relevant file and go tot he error line number.
		706
		707	URxvt.scrollstyle: plain
		708	URxvt.secondaryScroll: true
		709
		710	As the documentation says: plain is the preferred scrollbar for the
		711	author. The C<secondaryScroll> configures urxvt to scroll in full-screen
		712	apps, like screen, so lines scrolled out of screen end up in urxvt's
		713	scrollback buffer.
		714
		715	URxvt.background: #000000
		716	URxvt.foreground: gray90
		717	URxvt.color7: gray90
		718	URxvt.colorBD: #ffffff
		719	URxvt.cursorColor: #e0e080
		720	URxvt.throughColor: #8080f0
		721	URxvt.highlightColor: #f0f0f0
		722
		723	Some colours. Not sure which ones are being used or even non-defaults, but
		724	these are in my .Xdefaults. Most notably, they set foreground/background
		725	to light gray/black, and also make sure that the colour 7 matches the
		726	default foreground colour.
		727
		728	URxvt.underlineColor: yellow
		729
		730	Another colour, makes underline lines look different. Sometimes hurts, but
		731	is mostly a nice effect.
		732
		733	URxvt.geometry: 154x36
		734	URxvt.loginShell: false
		735	URxvt.meta: ignore
		736	URxvt.utmpInhibit: true
		737
		738	Uh, well, should be mostly self-explanatory. By specifying some defaults
		739	manually, I can quickly switch them for testing.
		740
		741	URxvt.saveLines: 8192
		742
		743	A large scrollback buffer is essential. Really.
		744
		745	URxvt.mapAlert: true
		746
		747	The only case I use it is for my IRC window, which I like to keep
		748	iconified till people msg me (which beeps).
		749
		750	URxvt.visualBell: true
		751
		752	The audible bell is often annoying, especially when in a crowd.
		753
		754	URxvt.insecure: true
		755
		756	Please don't hack my mutt! Ooops...
		757
		758	URxvt.pastableTabs: false
		759
		760	I once thought this is a great idea.
		761
		762	urxvt.font: 9x15bold,\
		763	-misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
		764	-misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
		765	[codeset=JISX0208]xft:Kochi Gothic, \
		766	xft:Bitstream Vera Sans Mono:autohint=true, \
		767	xft:Code2000:antialias=false
		768	urxvt.boldFont: -xos4-terminus-bold-r-normal--14-140-72-72-c-80-iso8859-15
		769	urxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
		770	urxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
		771
		772	I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
		773	overwhelmed. A special note: the C<9x15bold> mentioned above is actually
		774	the version from XFree-3.3, as XFree-4 replaced it by a totally different
		775	font (different glyphs for C<;> and many other harmless characters),
		776	while the second font is actually the C<9x15bold> from XFree4/XOrg. The
		777	bold version has less chars than the medium version, so I use it for rare
		778	characters, too. When editing sources with vim, I use italic for comments
		779	and other stuff, which looks quite good with Bitstream Vera anti-aliased.
		780
		781	Terminus is a quite bad font (many very wrong glyphs), but for most of my
		782	purposes, it works, and gives a different look, as my normal (Non-bold)
		783	font is already bold, and I want to see a difference between bold and
		784	normal fonts.
		785
		786	Please note that I used the C<urxvt> instance name and not the C<URxvt>
		787	class name. Thats because I use different configs for different purposes,
		788	for example, my IRC window is started with C<-name IRC>, and uses these
		789	defaults:
		790
		791	IRC*title: IRC
		792	IRC*geometry: 87x12+535+542
		793	IRC*saveLines: 0
		794	IRC*mapAlert: true
		795	IRC*font: suxuseuro
		796	IRC*boldFont: suxuseuro
		797	IRC*colorBD: white
		798	IRC*keysym.M-C-1: command:\033]710;suxuseuro\007\033]711;suxuseuro\007
		799	IRC*keysym.M-C-2: command:\033]710;9x15bold\007\033]711;9x15bold\007
		800
		801	C<Alt-Shift-1> and C<Alt-Shift-2> switch between two different font
		802	sizes. C<suxuseuro> allows me to keep an eye (and actually read)
		803	stuff while keeping a very small window. If somebody pastes something
		804	complicated (e.g. japanese), I temporarily switch to a larger font.
		805
		806	The above is all in my C<.Xdefaults> (I don't use C<.Xresources> nor
		807	C<xrdb>). I also have some resources in a separate C<.Xdefaults-hostname>
		808	file for different hosts, for example, on ym main desktop, I use:
		809
		810	URxvt.keysym.C-M-q: command:\033[3;5;5t
		811	URxvt.keysym.C-M-y: command:\033[3;5;606t
		812	URxvt.keysym.C-M-e: command:\033[3;1605;5t
		813	URxvt.keysym.C-M-c: command:\033[3;1605;606t
		814	URxvt.keysym.C-M-p: perl:test
		815
		816	The first for keysym definitions allow me to quickly bring some windows
		817	in the layout I like most. Ion users might start laughing but will stop
		818	immediately when I tell them that I use my own Fvwm2 module for much the
		819	same effect as Ion provides, and I only very rarely use the above key
		820	combinations :->
		821
		822	=head3 Why doesn't rxvt-unicode read my resources?
		823
		824	Well, why, indeed? It does, in a way very similar to other X
		825	applications. Most importantly, this means that if you or your OS loads
		826	resources into the X display (the right way to do it), rxvt-unicode will
		827	ignore any resource files in your home directory. It will only read
		828	F<$HOME/.Xdefaults> when no resources are attached to the display.
		829
		830	If you have or use an F<$HOME/.Xresources> file, chances are that
		831	resources are loaded into your X-server. In this case, you have to
		832	re-login after every change (or run F<xrdb -merge $HOME/.Xresources>).
		833
		834	Also consider the form resources have to use:
		835
		836	URxvt.resource: value
		837
		838	If you want to use another form (there are lots of different ways of
		839	specifying resources), make sure you understand whether and why it
		840	works. If unsure, use the form above.
		841
305	=head2 When I log-in to another system it tells me about missing terminfo data?	842	=head3 When I log-in to another system it tells me about missing terminfo data?
306		843
307	The terminal description used by rxvt-unicode is not as widely available	844	The terminal description used by rxvt-unicode is not as widely available
308	as that for xterm, or even rxvt (for which the same problem often arises).	845	as that for xterm, or even rxvt (for which the same problem often arises).
309		846
310	The correct solution for this problem is to install the terminfo, this can	847	The correct solution for this problem is to install the terminfo, this can
311	be done like this (with ncurses' infocmp):	848	be done like this (with ncurses' infocmp and works as user and admin):
312		849
313	REMOTE=remotesystem.domain	850	REMOTE=remotesystem.domain
314	infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"	851	infocmp rxvt-unicode | ssh $REMOTE "mkdir -p .terminfo && cat >/tmp/ti && tic /tmp/ti"
315		852
316	... or by installing rxvt-unicode normally on the remote system,	853	... or by installing rxvt-unicode normally on the remote system,
		854
		855	One some systems you might need to set C<$TERMINFO> to the full path of
		856	F<$HOME/.terminfo> for this to work.
317		857
318	If you cannot or do not want to do this, then you can simply set	858	If you cannot or do not want to do this, then you can simply set
319	C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of	859	C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
320	problems arising, which includes wrong keymapping, less and different	860	problems arising, which includes wrong keymapping, less and different
321	colours and some refresh errors in fullscreen applications. It's a nice	861	colours and some refresh errors in fullscreen applications. It's a nice
…		…
326	resource to set it:	866	resource to set it:
327		867
328	URxvt.termName: rxvt	868	URxvt.termName: rxvt
329		869
330	If you don't plan to use B<rxvt> (quite common...) you could also replace	870	If you don't plan to use B<rxvt> (quite common...) you could also replace
331	the rxvt terminfo file with the rxvt-unicode one.	871	the rxvt terminfo file with the rxvt-unicode one and use C<TERM=rxvt>.
332		872
333	=head2 C<tic> outputs some error when compiling the terminfo entry.	873	=head3 C<tic> outputs some error when compiling the terminfo entry.
334		874
335	Most likely it's the empty definition for C<enacs=>. Just replace it by	875	Most likely it's the empty definition for C<enacs=>. Just replace it by
336	C<enacs=\E[0@> and try again.	876	C<enacs=\E[0@> and try again.
337		877
338	=head2 C<bash>'s readline does not work correctly under @@RXVT_NAME@@.	878	=head3 C<bash>'s readline does not work correctly under @@URXVT_NAME@@.
339		879
340	See next entry.	880	See next entry.
341		881
342	=head2 I need a termcap file entry.	882	=head3 I need a termcap file entry.
343		883
344	One reason you might want this is that some distributions or operating	884	One reason you might want this is that some distributions or operating
345	systems still compile some programs using the long-obsoleted termcap	885	systems still compile some programs using the long-obsoleted termcap
346	library (Fedora Core's bash is one example) and rely on a termcap entry	886	library (Fedora Core's bash is one example) and rely on a termcap entry
347	for C<rxvt-unicode>.	887	for C<rxvt-unicode>.
348		888
349	You could use rxvt's termcap entry with resonable results in many cases.	889	You could use rxvt's termcap entry with reasonable results in many cases.
350	You can also create a termcap entry by using terminfo's infocmp program	890	You can also create a termcap entry by using terminfo's infocmp program
351	like this:	891	like this:
352		892
353	infocmp -C rxvt-unicode	893	infocmp -C rxvt-unicode
354		894
…		…
373	:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\	913	:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
374	:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\	914	:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\
375	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\	915	:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
376	:vs=\E[?25h:	916	:vs=\E[?25h:
377		917
378	=head2 Why does C<ls> no longer have coloured output?	918	=head3 Why does C<ls> no longer have coloured output?
379		919
380	The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to	920	The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to
381	decide wether a terminal has colour, but uses it's own configuration	921	decide whether a terminal has colour, but uses its own configuration
382	file. Needless to say, C<rxvt-unicode> is not in it's default file (among	922	file. Needless to say, C<rxvt-unicode> is not in its default file (among
383	with most other terminals supporting colour). Either add:	923	with most other terminals supporting colour). Either add:
384		924
385	TERM rxvt-unicode	925	TERM rxvt-unicode
386		926
387	to C</etc/DIR_COLORS> or simply add:	927	to C</etc/DIR_COLORS> or simply add:
388		928
389	alias ls='ls --color=auto'	929	alias ls='ls --color=auto'
390		930
391	to your C<.profile> or C<.bashrc>.	931	to your C<.profile> or C<.bashrc>.
392		932
393	=head2 Why doesn't vim/emacs etc. use the 88 colour mode?	933	=head3 Why doesn't vim/emacs etc. use the 88 colour mode?
394		934
395	See next entry.	935	See next entry.
396		936
397	=head2 Why doesn't vim/emacs etc. make use of italic?	937	=head3 Why doesn't vim/emacs etc. make use of italic?
398		938
399	See next entry.	939	See next entry.
400		940
401	=head2 Why are the secondary screen-related options not working properly?	941	=head3 Why are the secondary screen-related options not working properly?
402		942
403	Make sure you are using C<TERM=rxvt-unicode>. Some pre-packaged	943	Make sure you are using C<TERM=rxvt-unicode>. Some pre-packaged
404	distributions (most notably Debian GNU/Linux) break rxvt-unicode	944	distributions (most notably Debian GNU/Linux) break rxvt-unicode
405	by setting C<TERM> to C<rxvt>, which doesn't have these extra	945	by setting C<TERM> to C<rxvt>, which doesn't have these extra
406	features. Unfortunately, some of these (most notably, again, Debian	946	features. Unfortunately, some of these (most notably, again, Debian
407	GNU/Linux) furthermore fail to even install the C<rxvt-unicode> terminfo	947	GNU/Linux) furthermore fail to even install the C<rxvt-unicode> terminfo
408	file, so you will need to install it on your own (See the question B<When	948	file, so you will need to install it on your own (See the question B<When
409	I log-in to another system it tells me about missing terminfo data?> on	949	I log-in to another system it tells me about missing terminfo data?> on
410	how to do this).	950	how to do this).
411		951
412	=head2 My numerical keypad acts weird and generates differing output?
413		952
414	Some Debian GNUL/Linux users seem to have this problem, although no	953	=head2 Encoding / Locale / Input Method Issues
415	specific details were reported so far. It is possible that this is caused
416	by the wrong C<TERM> setting, although the details of wether and how
417	this can happen are unknown, as C<TERM=rxvt> should offer a compatible
418	keymap. See the answer to the previous question, and please report if that
419	helped.
420		954
421	=head2 Rxvt-unicode does not seem to understand the selected encoding?	955	=head3 Rxvt-unicode does not seem to understand the selected encoding?
422		956
423	See next entry.	957	See next entry.
424		958
425	=head2 Unicode does not seem to work?	959	=head3 Unicode does not seem to work?
426		960
427	If you encounter strange problems like typing an accented character but	961	If you encounter strange problems like typing an accented character but
428	getting two unrelated other characters or similar, or if program output is	962	getting two unrelated other characters or similar, or if program output is
429	subtly garbled, then you should check your locale settings.	963	subtly garbled, then you should check your locale settings.
430		964
431	Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the	965	Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
432	programs. Often rxvt-unicode is started in the C<C> locale, while the	966	programs running in it. Often rxvt-unicode is started in the C<C> locale,
433	login script running within the rxvt-unicode window changes the locale to	967	while the login script running within the rxvt-unicode window changes the
434	something else, e.g. C<en_GB.UTF-8>. Needless to say, this is not going to work.	968	locale to something else, e.g. C<en_GB.UTF-8>. Needless to say, this is
		969	not going to work, and is the most common cause for problems.
435		970
436	The best thing is to fix your startup environment, as you will likely run	971	The best thing is to fix your startup environment, as you will likely run
437	into other problems. If nothing works you can try this in your .profile.	972	into other problems. If nothing works you can try this in your .profile.
438		973
439	printf '\e]701;%s\007' "$LC_CTYPE"	974	printf '\33]701;%s\007' "$LC_CTYPE" # $LANG or $LC_ALL are worth a try, too
440		975
441	If this doesn't work, then maybe you use a C<LC_CTYPE> specification not	976	If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
442	supported on your systems. Some systems have a C<locale> command which	977	supported on your systems. Some systems have a C<locale> command which
443	displays this (also, C<perl -e0> can be used to check locale settings, as	978	displays this (also, C<perl -e0> can be used to check locale settings, as
444	it will complain loudly if it cannot set the locale). If it displays something	979	it will complain loudly if it cannot set the locale). If it displays something
…		…
450		985
451	If nothing works and you are sure that everything is set correctly then	986	If nothing works and you are sure that everything is set correctly then
452	you will need to remember a little known fact: Some programs just don't	987	you will need to remember a little known fact: Some programs just don't
453	support locales :(	988	support locales :(
454		989
455	=head2 Why do some characters look so much different than others?	990	=head3 How does rxvt-unicode determine the encoding to use?
456		991
457	See next entry.	992	See next entry.
458		993
459	=head2 How does rxvt-unicode choose fonts?	994	=head3 Is there an option to switch encodings?
460		995
461	Most fonts do not contain the full range of Unicode, which is	996	Unlike some other terminals, rxvt-unicode has no encoding switch, and no
462	fine. Chances are that the font you (or the admin/package maintainer of	997	specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
463	your system/os) have specified does not cover all the characters you want	998	UTF-8 or any other encodings with respect to terminal I/O.
464	to display.
465		999
466	B<rxvt-unicode> makes a best-effort try at finding a replacement	1000	The reasons is that there exists a perfectly fine mechanism for selecting
467	font. Often the result is fine, but sometimes the chosen font looks	1001	the encoding, doing I/O and (most important) communicating this to all
468	bad/ugly/wrong. Some fonts have totally strange characters that don't	1002	applications so everybody agrees on character properties such as width
469	resemble the correct glyph at all, and rxvt-unicode lacks the artificial	1003	and code number. This mechanism is the I<locale>. Applications not using
470	intelligence to detect that a specific glyph is wrong: it has to believe	1004	that info will have problems (for example, C<xterm> gets the width of
471	the font that the characters it claims to contain indeed look correct.	1005	characters wrong as it uses its own, locale-independent table under all
472
473	In that case, select a font of your taste and add it to the font list,
474	e.g.:
475
476	@@RXVT_NAME@@ -fn basefont,font2,font3...
477
478	When rxvt-unicode sees a character, it will first look at the base
479	font. If the base font does not contain the character, it will go to the
480	next font, and so on. Specifying your own fonts will also speed up this
481	search and use less resources within rxvt-unicode and the X-server.
482
483	The only limitation is that none of the fonts may be larger than the base
484	font, as the base font defines the terminal character cell size, which
485	must be the same due to the way terminals work.
486
487	=head2 Why do some chinese characters look so different than others?
488
489	This is because there is a difference between script and language --
490	rxvt-unicode does not know which language the text that is output is,
491	as it only knows the unicode character codes. If rxvt-unicode first
492	sees a japanese/chinese character, it might choose a japanese font for
493	display. Subsequent japanese characters will use that font. Now, many
494	chinese characters aren't represented in japanese fonts, so when the first
495	non-japanese character comes up, rxvt-unicode will look for a chinese font
496	-- unfortunately at this point, it will still use the japanese font for
497	chinese characters that are also in the japanese font.
498
499	The workaround is easy: just tag a chinese font at the end of your font
500	list (see the previous question). The key is to view the font list as
501	a preference list: If you expect more japanese, list a japanese font
502	first. If you expect more chinese, put a chinese font first.
503
504	In the future it might be possible to switch language preferences at
505	runtime (the internal data structure has no problem with using different
506	fonts for the same character at the same time, but no interface for this
507	has been designed yet).
508
509	Until then, you might get away with switching fonts at runtime (see L<Can
510	I switch the fonts at runtime?> later in this document).
511
512	=head2 Why does rxvt-unicode sometimes leave pixel droppings?
513
514	Most fonts were not designed for terminal use, which means that character
515	size varies a lot. A font that is otherwise fine for terminal use might
516	contain some characters that are simply too wide. Rxvt-unicode will avoid
517	these characters. For characters that are just "a bit" too wide a special
518	"careful" rendering mode is used that redraws adjacent characters.
519
520	All of this requires that fonts do not lie about character sizes,
521	however: Xft fonts often draw glyphs larger than their acclaimed bounding
522	box, and rxvt-unicode has no way of detecting this (the correct way is to
523	ask for the character bounding box, which unfortunately is wrong in these
524	cases).	1006	locales).
525		1007
526	It's not clear (to me at least), wether this is a bug in Xft, freetype,	1008	Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
527	or the respective font. If you encounter this problem you might try using	1009	programs doing the same (that is, most) will automatically agree in the
528	the C<-lsp> option to give the font more height. If that doesn't work, you	1010	interpretation of characters.
529	might be forced to use a different font.
530		1011
531	All of this is not a problem when using X11 core fonts, as their bounding	1012	Unfortunately, there is no system-independent way to select locales, nor
532	box data is correct.	1013	is there a standard on how locale specifiers will look like.
533		1014
534	=head2 On Solaris 9, many line-drawing characters are too wide.	1015	On most systems, the content of the C<LC_CTYPE> environment variable
		1016	contains an arbitrary string which corresponds to an already-installed
		1017	locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
		1018	C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
		1019	(i.e. C<de> or C<german>) are also common.
535		1020
536	Seems to be a known bug, read	1021	Rxvt-unicode ignores all other locale categories, and except for
537	L<http://nixdoc.net/files/forum/about34198.html>. Some people use the	1022	the encoding, ignores country or language-specific settings,
538	following ugly workaround to get non-double-wide-characters working:	1023	i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the normally same to
		1024	rxvt-unicode.
539		1025
540	#define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)	1026	If you want to use a specific encoding you have to make sure you start
		1027	rxvt-unicode with the correct C<LC_CTYPE> category.
541		1028
542	=head2 My Compose (Multi_key) key is no longer working.	1029	=head3 Can I switch locales at runtime?
543		1030
544	The most common causes for this are that either your locale is not set	1031	Yes, using an escape sequence. Try something like this, which sets
545	correctly, or you specified a B<preeditStyle> that is not supported by	1032	rxvt-unicode's idea of C<LC_CTYPE>.
546	your input method. For example, if you specified B<OverTheSpot> and
547	your input method (e.g. the default input method handling Compose keys)
548	does not support this (for instance because it is not visual), then
549	rxvt-unicode will continue without an input method.
550		1033
551	In this case either do not specify a B<preeditStyle> or specify more than	1034	printf '\33]701;%s\007' ja_JP.SJIS
552	one pre-edit style, such as B<OverTheSpot,Root,None>.
553		1035
554	=head2 I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755	1036	See also the previous answer.
555		1037
556	Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on	1038	Sometimes this capability is rather handy when you want to work in
557	international keyboards) or simply use ISO 14755 support to your	1039	one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
558	advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other	1040	(e.g. UTF-8). For example, I use this script to start C<xjdic>, which
559	codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape	1041	first switches to a locale supported by xjdic and back later:
560	character and so on.
561		1042
562	=head2 How can I keep rxvt-unicode from using reverse video so much?	1043	printf '\33]701;%s\007' ja_JP.SJIS
		1044	xjdic -js
		1045	printf '\33]701;%s\007' de_DE.UTF-8
563		1046
564	First of all, make sure you are running with the right terminal settings	1047	You can also use xterm's C<luit> program, which usually works fine, except
565	(C<TERM=rxvt-unicode>), which will get rid of most of these effects. Then	1048	for some locales where character width differs between program- and
566	make sure you have specified colours for italic and bold, as otherwise	1049	rxvt-unicode-locales.
567	rxvt-unicode might use reverse video to simulate the effect:
568		1050
569	URxvt.colorBD: white	1051	=head3 I have problems getting my input method working.
570	URxvt.colorIT: green
571		1052
572	=head2 Some programs assume totally weird colours (red instead of blue), how can I fix that?	1053	Try a search engine, as this is slightly different for every input method server.
573		1054
574	For some unexplainable reason, some rare programs assume a very weird	1055	Here is a checklist:
575	colour palette when confronted with a terminal with more than the standard
576	8 colours (rxvt-unicode supports 88). The right fix is, of course, to fix
577	these programs not to assume non-ISO colours without very good reasons.
578		1056
579	In the meantime, you can either edit your C<rxvt-unicode> terminfo	1057	=over 4
580	definition to only claim 8 colour support or use C<TERM=rxvt>, which will
581	fix colours but keep you from using other rxvt-unicode features.
582		1058
		1059	=item - Make sure your locale I<and> the imLocale are supported on your OS.
		1060
		1061	Try C<locale -a> or check the documentation for your OS.
		1062
		1063	=item - Make sure your locale or imLocale matches a locale supported by your XIM.
		1064
		1065	For example, B<kinput2> does not support UTF-8 locales, you should use
		1066	C<ja_JP.EUC-JP> or equivalent.
		1067
		1068	=item - Make sure your XIM server is actually running.
		1069
		1070	=item - Make sure the C<XMODIFIERS> environment variable is set correctly when I<starting> rxvt-unicode.
		1071
		1072	When you want to use e.g. B<kinput2>, it must be set to
		1073	C<@im=kinput2>. For B<scim>, use C<@im=SCIM>. You can see what input
		1074	method servers are running with this command:
		1075
		1076	xprop -root XIM_SERVERS
		1077
		1078	=item
		1079
		1080	=back
		1081
		1082	=head3 My input method wants <some encoding> but I want UTF-8, what can I do?
		1083
		1084	You can specify separate locales for the input method and the rest of the
		1085	terminal, using the resource C<imlocale>:
		1086
		1087	URxvt.imlocale: ja_JP.EUC-JP
		1088
		1089	Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
		1090	use your input method. Please note, however, that, depending on your Xlib
		1091	version, you may not be able to input characters outside C<EUC-JP> in a
		1092	normal way then, as your input method limits you.
		1093
		1094	=head3 Rxvt-unicode crashes when the X Input Method changes or exits.
		1095
		1096	Unfortunately, this is unavoidable, as the XIM protocol is racy by
		1097	design. Applications can avoid some crashes at the expense of memory
		1098	leaks, and Input Methods can avoid some crashes by careful ordering at
		1099	exit time. B<kinput2> (and derived input methods) generally succeeds,
		1100	while B<SCIM> (or similar input methods) fails. In the end, however,
		1101	crashes cannot be completely avoided even if both sides cooperate.
		1102
		1103	So the only workaround is not to kill your Input Method Servers.
		1104
		1105
		1106	=head2 Operating Systems / Package Maintaining
		1107
		1108	=head3 I am using Debian GNU/Linux and have a problem...
		1109
		1110	The Debian GNU/Linux package of rxvt-unicode in sarge contains large
		1111	patches that considerably change the behaviour of rxvt-unicode (but
		1112	unfortunately this notice has been removed). Before reporting a bug to
		1113	the original rxvt-unicode author please download and install the genuine
		1114	version (L<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
		1115	the problem. If you cannot, chances are that the problems are specific to
		1116	Debian GNU/Linux, in which case it should be reported via the Debian Bug
		1117	Tracking System (use C<reportbug> to report the bug).
		1118
		1119	For other problems that also affect the Debian package, you can and
		1120	probably should use the Debian BTS, too, because, after all, it's also a
		1121	bug in the Debian version and it serves as a reminder for other users that
		1122	might encounter the same issue.
		1123
		1124	=head3 I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
		1125
		1126	You should build one binary with the default options. F<configure>
		1127	now enables most useful options, and the trend goes to making them
		1128	runtime-switchable, too, so there is usually no drawback to enabling them,
		1129	except higher disk and possibly memory usage. The perl interpreter should
		1130	be enabled, as important functionality (menus, selection, likely more in
		1131	the future) depends on it.
		1132
		1133	You should not overwrite the C<perl-ext-common> snd C<perl-ext> resources
		1134	system-wide (except maybe with C<defaults>). This will result in useful
		1135	behaviour. If your distribution aims at low memory, add an empty
		1136	C<perl-ext-common> resource to the app-defaults file. This will keep the
		1137	perl interpreter disabled until the user enables it.
		1138
		1139	If you can/want build more binaries, I recommend building a minimal
		1140	one with C<--disable-everything> (very useful) and a maximal one with
		1141	C<--enable-everything> (less useful, it will be very big due to a lot of
		1142	encodings built-in that increase download times and are rarely used).
		1143
		1144	=head3 I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
		1145
		1146	It should be, starting with release 7.1. You are encouraged to properly
		1147	install urxvt with privileges necessary for your OS now.
		1148
		1149	When rxvt-unicode detects that it runs setuid or setgid, it will fork
		1150	into a helper process for privileged operations (pty handling on some
		1151	systems, utmp/wtmp/lastlog handling on others) and drop privileges
		1152	immediately. This is much safer than most other terminals that keep
		1153	privileges while running (but is more relevant to urxvt, as it contains
		1154	things as perl interpreters, which might be "helpful" to attackers).
		1155
		1156	This forking is done as the very first within main(), which is very early
		1157	and reduces possible bugs to initialisation code run before main(), or
		1158	things like the dynamic loader of your system, which should result in very
		1159	little risk.
		1160
583	=head2 I am on FreeBSD and rxvt-unicode does not seem to work at all.	1161	=head3 I am on FreeBSD and rxvt-unicode does not seem to work at all.
584		1162
585	Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined	1163	Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
586	in your compile environment, or an implementation that implements it,	1164	in your compile environment, or an implementation that implements it,
587	wether it defines the symbol or not. C<__STDC_ISO_10646__> requires that	1165	whether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
588	B<wchar_t> is represented as unicode.	1166	B<wchar_t> is represented as unicode.
589		1167
590	As you might have guessed, FreeBSD does neither define this symobl nor	1168	As you might have guessed, FreeBSD does neither define this symbol nor
591	does it support it. Instead, it uses it's own internal representation of	1169	does it support it. Instead, it uses its own internal representation of
592	B<wchar_t>. This is, of course, completely fine with respect to standards.	1170	B<wchar_t>. This is, of course, completely fine with respect to standards.
593		1171
594	However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and	1172	However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and
595	C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>.	1173	C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>.
596		1174
…		…
610		1188
611	The rxvt-unicode author insists that the right way to fix this is in the	1189	The rxvt-unicode author insists that the right way to fix this is in the
612	system libraries once and for all, instead of forcing every app to carry	1190	system libraries once and for all, instead of forcing every app to carry
613	complete replacements for them :)	1191	complete replacements for them :)
614		1192
615	=head2 I use Solaris 9 and it doesn't compile/work/etc.
616
617	Try the diff in F<doc/solaris9.patch> as a base. It fixes the worst
618	problems with C<wcwidth> and a compile problem.
619
620	=head2 How can I use rxvt-unicode under cygwin?	1193	=head3 How can I use rxvt-unicode under cygwin?
621		1194
622	rxvt-unicode should compile and run out of the box on cygwin, using	1195	rxvt-unicode should compile and run out of the box on cygwin, using
623	the X11 libraries that come with cygwin. libW11 emulation is no	1196	the X11 libraries that come with cygwin. libW11 emulation is no
624	longer supported (and makes no sense, either, as it only supported a	1197	longer supported (and makes no sense, either, as it only supported a
625	single font). I recommend starting the X-server in C<-multiwindow> or	1198	single font). I recommend starting the X-server in C<-multiwindow> or
…		…
628		1201
629	At the time of this writing, cygwin didn't seem to support any multi-byte	1202	At the time of this writing, cygwin didn't seem to support any multi-byte
630	encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited	1203	encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited
631	to 8-bit encodings.	1204	to 8-bit encodings.
632		1205
633	=head2 How does rxvt-unicode determine the encoding to use?	1206	=head3 Character widths are not correct.
634		1207
635	See next entry.	1208	urxvt uses the system wcwidth function to know the information about
		1209	the width of characters, so on systems with incorrect locale data you
		1210	will likely get bad results. Two notorious examples are Solaris 9,
		1211	where single-width characters like U+2514 are reported as double-width,
		1212	and Darwin 8, where combining chars are reported having width 1.
636		1213
637	=head2 Is there an option to switch encodings?	1214	The solution is to upgrade your system or switch to a better one. A
		1215	possibly working workaround is to use a wcwidth implementation like
638		1216
639	Unlike some other terminals, rxvt-unicode has no encoding switch, and no	1217	http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
640	specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
641	UTF-8 or any other encodings with respect to terminal I/O.
642		1218
643	The reasons is that there exists a perfectly fine mechanism for selecting
644	the encoding, doing I/O and (most important) communicating this to all
645	applications so everybody agrees on character properties such as width
646	and code number. This mechanism is the I<locale>. Applications not using
647	that info will have problems (for example, C<xterm> gets the width of
648	characters wrong as it uses it's own, locale-independent table under all
649	locales).
650
651	Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
652	programs doing the same (that is, most) will automatically agree in the
653	interpretation of characters.
654
655	Unfortunately, there is no system-independent way to select locales, nor
656	is there a standard on how locale specifiers will look like.
657
658	On most systems, the content of the C<LC_CTYPE> environment variable
659	contains an arbitrary string which corresponds to an already-installed
660	locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
661	C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
662	(i.e. C<de> or C<german>) are also common.
663
664	Rxvt-unicode ignores all other locale categories, and except for
665	the encoding, ignores country or language-specific settings,
666	i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the normally same to
667	rxvt-unicode.
668
669	If you want to use a specific encoding you have to make sure you start
670	rxvt-unicode with the correct C<LC_CTYPE> category.
671
672	=head2 Can I switch locales at runtime?
673
674	Yes, using an escape sequence. Try something like this, which sets
675	rxvt-unicode's idea of C<LC_CTYPE>.
676
677	printf '\e]701;%s\007' ja_JP.SJIS
678
679	See also the previous answer.
680
681	Sometimes this capability is rather handy when you want to work in
682	one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
683	(e.g. UTF-8). For example, I use this script to start C<xjdic>, which
684	first switches to a locale supported by xjdic and back later:
685
686	printf '\e]701;%s\007' ja_JP.SJIS
687	xjdic -js
688	printf '\e]701;%s\007' de_DE.UTF-8
689
690	You can also use xterm's C<luit> program, which usually works fine, except
691	for some locales where character width differs between program- and
692	rxvt-unicode-locales.
693
694	=head2 Can I switch the fonts at runtime?
695
696	Yes, using an escape sequence. Try something like this, which has the same
697	effect as using the C<-fn> switch, and takes effect immediately:
698
699	printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"
700
701	This is useful if you e.g. work primarily with japanese (and prefer a
702	japanese font), but you have to switch to chinese temporarily, where
703	japanese fonts would only be in your way.
704
705	You can think of this as a kind of manual ISO-2022 switching.
706
707	=head2 Why do italic characters look as if clipped?
708
709	Many fonts have difficulties with italic characters and hinting. For
710	example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
711	Mono> completely fails in it's italic face. A workaround might be to
712	enable freetype autohinting, i.e. like this:
713
714	URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true
715	URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
716
717	=head2 My input method wants <some encoding> but I want UTF-8, what can I do?
718
719	You can specify separate locales for the input method and the rest of the
720	terminal, using the resource C<imlocale>:
721
722	URxvt.imlocale: ja_JP.EUC-JP
723
724	Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
725	use your input method. Please note, however, that you will not be able to
726	input characters outside C<EUC-JP> in a normal way then, as your input
727	method limits you.
728
729	=head2 Rxvt-unicode crashes when the X Input Method changes or exits.
730
731	Unfortunately, this is unavoidable, as the XIM protocol is racy by
732	design. Applications can avoid some crashes at the expense of memory
733	leaks, and Input Methods can avoid some crashes by careful ordering at
734	exit time. B<kinput2> (and derived input methods) generally succeeds,
735	while B<SCIM> (or similar input methods) fails. In the end, however,
736	crashes cannot be completely avoided even if both sides cooperate.
737
738	So the only workaround is not to kill your Input Method Servers.
739
740	=head2 Rxvt-unicode uses gobs of memory, how can I reduce that?
741
742	Rxvt-unicode tries to obey the rule of not charging you for something you
743	don't use. One thing you should try is to configure out all settings that
744	you don't need, for example, Xft support is a resource hog by design,
745	when used. Compiling it out ensures that no Xft font will be loaded
746	accidentally when rxvt-unicode tries to find a font for your characters.
747
748	Also, many people (me included) like large windows and even larger
749	scrollback buffers: Without C<--enable-unicode3>, rxvt-unicode will use
750	6 bytes per screen cell. For a 160x?? window this amounts to almost a
751	kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
752	use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
753	rxvt-unicode then uses 8 bytes per screen cell.
754
755	=head2 Can I speed up Xft rendering somehow?
756
757	Yes, the most obvious way to speed it up is to avoid Xft entirely, as
758	it is simply slow. If you still want Xft fonts you might try to disable
759	antialiasing (by appending C<:antialias=false>), which saves lots of
760	memory and also speeds up rendering considerably.
761
762	=head2 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
763
764	Rxvt-unicode will use whatever you specify as a font. If it needs to
765	fall back to it's default font search list it will prefer X11 core
766	fonts, because they are small and fast, and then use Xft fonts. It has
767	antialiasing disabled for most of them, because the author thinks they
768	look best that way.
769
770	If you want antialiasing, you have to specify the fonts manually.
771
772	=head2 Mouse cut/paste suddenly no longer works.
773
774	Make sure that mouse reporting is actually turned off since killing
775	some editors prematurely may leave the mouse in mouse report mode. I've
776	heard that tcsh may use mouse reporting unless it otherwise specified. A
777	quick check is to see if cut/paste works when the Alt or Shift keys are
778	depressed.
779
780	=head2 What's with this bold/blink stuff?
781
782	If no bold colour is set via C<colorBD:>, bold will invert text using the
783	standard foreground colour.
784
785	For the standard background colour, blinking will actually make the
786	text blink when compiled with C<--enable-blinking>. with standard
787	colours. Without C<--enable-blinking>, the blink attribute will be
788	ignored.
789
790	On ANSI colours, bold/blink attributes are used to set high-intensity
791	foreground/background colors.
792
793	color0-7 are the low-intensity colors.
794
795	color8-15 are the corresponding high-intensity colors.
796
797	=head2 I don't like the screen colors. How do I change them?
798
799	You can change the screen colors at run-time using F<~/.Xdefaults>
800	resources (or as long-options).
801
802	Here are values that are supposed to resemble a VGA screen,
803	including the murky brown that passes for low-intensity yellow:
804
805	URxvt.color0: #000000
806	URxvt.color1: #A80000
807	URxvt.color2: #00A800
808	URxvt.color3: #A8A800
809	URxvt.color4: #0000A8
810	URxvt.color5: #A800A8
811	URxvt.color6: #00A8A8
812	URxvt.color7: #A8A8A8
813
814	URxvt.color8: #000054
815	URxvt.color9: #FF0054
816	URxvt.color10: #00FF54
817	URxvt.color11: #FFFF54
818	URxvt.color12: #0000FF
819	URxvt.color13: #FF00FF
820	URxvt.color14: #00FFFF
821	URxvt.color15: #FFFFFF
822
823	And here is a more complete set of non-standard colors described (not by
824	me) as "pretty girly".
825
826	URxvt.cursorColor: #dc74d1
827	URxvt.pointerColor: #dc74d1
828	URxvt.background: #0e0e0e
829	URxvt.foreground: #4ad5e1
830	URxvt.color0: #000000
831	URxvt.color8: #8b8f93
832	URxvt.color1: #dc74d1
833	URxvt.color9: #dc74d1
834	URxvt.color2: #0eb8c7
835	URxvt.color10: #0eb8c7
836	URxvt.color3: #dfe37e
837	URxvt.color11: #dfe37e
838	URxvt.color5: #9e88f0
839	URxvt.color13: #9e88f0
840	URxvt.color6: #73f7ff
841	URxvt.color14: #73f7ff
842	URxvt.color7: #e1dddd
843	URxvt.color15: #e1dddd
844
845	=head2 How can I start @@RXVT_NAME@@d in a race-free way?
846
847	Try C<@@RXVT_NAME@@d -f -o>, which tells @@RXVT_NAME@@d to open the
848	display, create the listening socket and then fork.
849
850	=head2 What's with the strange Backspace/Delete key behaviour?
851
852	Assuming that the physical Backspace key corresponds to the
853	BackSpace keysym (not likely for Linux ... see the following
854	question) there are two standard values that can be used for
855	Backspace: C<^H> and C<^?>.
856
857	Historically, either value is correct, but rxvt-unicode adopts the debian
858	policy of using C<^?> when unsure, because it's the one only only correct
859	choice :).
860
861	Rxvt-unicode tries to inherit the current stty settings and uses the value
862	of `erase' to guess the value for backspace. If rxvt-unicode wasn't
863	started from a terminal (say, from a menu or by remote shell), then the
864	system value of `erase', which corresponds to CERASE in <termios.h>, will
865	be used (which may not be the same as your stty setting).
866
867	For starting a new rxvt-unicode:
868
869	# use Backspace = ^H
870	$ stty erase ^H
871	$ @@RXVT_NAME@@
872
873	# use Backspace = ^?
874	$ stty erase ^?
875	$ @@RXVT_NAME@@
876
877	Toggle with C<ESC [ 36 h> / C<ESC [ 36 l>.
878
879	For an existing rxvt-unicode:
880
881	# use Backspace = ^H
882	$ stty erase ^H
883	$ echo -n "^[[36h"
884
885	# use Backspace = ^?
886	$ stty erase ^?
887	$ echo -n "^[[36l"
888
889	This helps satisfy some of the Backspace discrepancies that occur, but
890	if you use Backspace = C<^H>, make sure that the termcap/terminfo value
891	properly reflects that.
892
893	The Delete key is a another casualty of the ill-defined Backspace problem.
894	To avoid confusion between the Backspace and Delete keys, the Delete
895	key has been assigned an escape sequence to match the vt100 for Execute
896	(C<ESC [ 3 ~>) and is in the supplied termcap/terminfo.
897
898	Some other Backspace problems:
899
900	some editors use termcap/terminfo,
901	some editors (vim I'm told) expect Backspace = ^H,
902	GNU Emacs (and Emacs-like editors) use ^H for help.
903
904	Perhaps someday this will all be resolved in a consistent manner.
905
906	=head2 I don't like the key-bindings. How do I change them?
907
908	There are some compile-time selections available via configure. Unless
909	you have run "configure" with the C<--disable-resources> option you can
910	use the `keysym' resource to alter the keystrings associated with keysyms.
911
912	Here's an example for a URxvt session started using C<@@RXVT_NAME@@ -name URxvt>
913
914	URxvt.keysym.Home: \033[1~
915	URxvt.keysym.End: \033[4~
916	URxvt.keysym.C-apostrophe: \033<C-'>
917	URxvt.keysym.C-slash: \033<C-/>
918	URxvt.keysym.C-semicolon: \033<C-;>
919	URxvt.keysym.C-grave: \033<C-`>
920	URxvt.keysym.C-comma: \033<C-,>
921	URxvt.keysym.C-period: \033<C-.>
922	URxvt.keysym.C-0x60: \033<C-`>
923	URxvt.keysym.C-Tab: \033<C-Tab>
924	URxvt.keysym.C-Return: \033<C-Return>
925	URxvt.keysym.S-Return: \033<S-Return>
926	URxvt.keysym.S-space: \033<S-Space>
927	URxvt.keysym.M-Up: \033<M-Up>
928	URxvt.keysym.M-Down: \033<M-Down>
929	URxvt.keysym.M-Left: \033<M-Left>
930	URxvt.keysym.M-Right: \033<M-Right>
931	URxvt.keysym.M-C-0: list \033<M-C- 0123456789 >
932	URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz >
933	URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007
934
935	See some more examples in the documentation for the B<keysym> resource.
936
937	=head2 I'm using keyboard model XXX that has extra Prior/Next/Insert keys.
938	How do I make use of them? For example, the Sun Keyboard type 4
939	has the following mappings that rxvt-unicode doesn't recognize.
940
941	KP_Insert == Insert
942	F22 == Print
943	F27 == Home
944	F29 == Prior
945	F33 == End
946	F35 == Next
947
948	Rather than have rxvt-unicode try to accommodate all the various possible
949	keyboard mappings, it is better to use `xmodmap' to remap the keys as
950	required for your particular machine.
951
952	=head2 How do I distinguish wether I'm running rxvt-unicode or a regular xterm?
953	I need this to decide about setting colors etc.
954
955	rxvt and rxvt-unicode always export the variable "COLORTERM", so you can
956	check and see if that is set. Note that several programs, JED, slrn,
957	Midnight Commander automatically check this variable to decide whether or
958	not to use color.
959
960	=head2 How do I set the correct, full IP address for the DISPLAY variable?
961
962	If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
963	insecure mode then it is possible to use the following shell script
964	snippets to correctly set the display. If your version of rxvt-unicode
965	wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
966	the COLORTERM variable can be used to distinguish rxvt-unicode from a
967	regular xterm.
968
969	Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
970	snippets:
971
972	# Bourne/Korn/POSIX family of shells:
973	[ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
974	if [ ${TERM:-foo} = xterm ]; then
975	stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
976	echo -n '^[Z'
977	read term_id
978	stty icanon echo
979	if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
980	echo -n '^[[7n' # query the rxvt we are in for the DISPLAY string
981	read DISPLAY # set it in our local shell
982	fi
983	fi
984
985	=head2 How do I compile the manual pages for myself?
986
987	You need to have a recent version of perl installed as F</usr/bin/perl>,
988	one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to
989	the doc subdirectory and enter C<make alldoc>.
990
991	=head2 My question isn't answered here, can I ask a human?
992
993	Before sending me mail, you could go to IRC: C<irc.freenode.net>,
994	channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be
995	interested in learning about new and exciting problems (but not FAQs :).
996
997	=head1 RXVT TECHNICAL REFERENCE	1219	=head1 RXVT-UNICODE TECHNICAL REFERENCE
998
999	=head1 DESCRIPTION
1000		1220
1001	The rest of this document describes various technical aspects of	1221	The rest of this document describes various technical aspects of
1002	B<rxvt-unicode>. First the description of supported command sequences,	1222	B<rxvt-unicode>. First the description of supported command sequences,
1003	followed by pixmap support and last by a description of all features	1223	followed by pixmap support and last by a description of all features
1004	selectable at C<configure> time.	1224	selectable at C<configure> time.
1005		1225
1006	=head1 Definitions	1226	=head2 Definitions
1007		1227
1008	=over 4	1228	=over 4
1009		1229
1010	=item B<< C<c> >>	1230	=item B<< C<c> >>
1011		1231
…		…
1029		1249
1030	A text parameter composed of printable characters.	1250	A text parameter composed of printable characters.
1031		1251
1032	=back	1252	=back
1033		1253
1034	=head1 Values	1254	=head2 Values
1035		1255
1036	=over 4	1256	=over 4
1037		1257
1038	=item B<< C<ENQ> >>	1258	=item B<< C<ENQ> >>
1039		1259
…		…
1082		1302
1083	Space Character	1303	Space Character
1084		1304
1085	=back	1305	=back
1086		1306
1087	=head1 Escape Sequences	1307	=head2 Escape Sequences
1088		1308
1089	=over 4	1309	=over 4
1090		1310
1091	=item B<< C<ESC # 8> >>	1311	=item B<< C<ESC # 8> >>
1092		1312
…		…
1190		1410
1191	=back	1411	=back
1192		1412
1193	X<CSI>	1413	X<CSI>
1194		1414
1195	=head1 CSI (Command Sequence Introducer) Sequences	1415	=head2 CSI (Command Sequence Introducer) Sequences
1196		1416
1197	=over 4	1417	=over 4
1198		1418
1199	=item B<< C<ESC [ Ps @> >>	1419	=item B<< C<ESC [ Ps @> >>
1200		1420
…		…
1470		1690
1471	=back	1691	=back
1472		1692
1473	X<PrivateModes>	1693	X<PrivateModes>
1474		1694
1475	=head1 DEC Private Modes	1695	=head2 DEC Private Modes
1476		1696
1477	=over 4	1697	=over 4
1478		1698
1479	=item B<< C<ESC [ ? Pm h> >>	1699	=item B<< C<ESC [ ? Pm h> >>
1480		1700
…		…
1496		1716
1497	Toggle DEC Private Mode Values (rxvt extension). I<where>	1717	Toggle DEC Private Mode Values (rxvt extension). I<where>
1498		1718
1499	=over 4	1719	=over 4
1500		1720
1501	=item B<< C<Ps = 1> >> (DECCKM)	1721	=item B<< C<Pm = 1> >> (DECCKM)
1502		1722
1503	=begin table	1723	=begin table
1504		1724
1505	B<< C<h> >> Application Cursor Keys	1725	B<< C<h> >> Application Cursor Keys
1506	B<< C<l> >> Normal Cursor Keys	1726	B<< C<l> >> Normal Cursor Keys
1507		1727
1508	=end table	1728	=end table
1509		1729
1510	=item B<< C<Ps = 2> >> (ANSI/VT52 mode)	1730	=item B<< C<Pm = 2> >> (ANSI/VT52 mode)
1511		1731
1512	=begin table	1732	=begin table
1513		1733
1514	B<< C<h> >> Enter VT52 mode	1734	B<< C<h> >> Enter VT52 mode
1515	B<< C<l> >> Enter VT52 mode	1735	B<< C<l> >> Enter VT52 mode
1516		1736
1517	=end table	1737	=end table
1518		1738
1519	=item B<< C<Ps = 3> >>	1739	=item B<< C<Pm = 3> >>
1520		1740
1521	=begin table	1741	=begin table
1522		1742
1523	B<< C<h> >> 132 Column Mode (DECCOLM)	1743	B<< C<h> >> 132 Column Mode (DECCOLM)
1524	B<< C<l> >> 80 Column Mode (DECCOLM)	1744	B<< C<l> >> 80 Column Mode (DECCOLM)
1525		1745
1526	=end table	1746	=end table
1527		1747
1528	=item B<< C<Ps = 4> >>	1748	=item B<< C<Pm = 4> >>
1529		1749
1530	=begin table	1750	=begin table
1531		1751
1532	B<< C<h> >> Smooth (Slow) Scroll (DECSCLM)	1752	B<< C<h> >> Smooth (Slow) Scroll (DECSCLM)
1533	B<< C<l> >> Jump (Fast) Scroll (DECSCLM)	1753	B<< C<l> >> Jump (Fast) Scroll (DECSCLM)
1534		1754
1535	=end table	1755	=end table
1536		1756
1537	=item B<< C<Ps = 5> >>	1757	=item B<< C<Pm = 5> >>
1538		1758
1539	=begin table	1759	=begin table
1540		1760
1541	B<< C<h> >> Reverse Video (DECSCNM)	1761	B<< C<h> >> Reverse Video (DECSCNM)
1542	B<< C<l> >> Normal Video (DECSCNM)	1762	B<< C<l> >> Normal Video (DECSCNM)
1543		1763
1544	=end table	1764	=end table
1545		1765
1546	=item B<< C<Ps = 6> >>	1766	=item B<< C<Pm = 6> >>
1547		1767
1548	=begin table	1768	=begin table
1549		1769
1550	B<< C<h> >> Origin Mode (DECOM)	1770	B<< C<h> >> Origin Mode (DECOM)
1551	B<< C<l> >> Normal Cursor Mode (DECOM)	1771	B<< C<l> >> Normal Cursor Mode (DECOM)
1552		1772
1553	=end table	1773	=end table
1554		1774
1555	=item B<< C<Ps = 7> >>	1775	=item B<< C<Pm = 7> >>
1556		1776
1557	=begin table	1777	=begin table
1558		1778
1559	B<< C<h> >> Wraparound Mode (DECAWM)	1779	B<< C<h> >> Wraparound Mode (DECAWM)
1560	B<< C<l> >> No Wraparound Mode (DECAWM)	1780	B<< C<l> >> No Wraparound Mode (DECAWM)
1561		1781
1562	=end table	1782	=end table
1563		1783
1564	=item B<< C<Ps = 8> >> I<unimplemented>	1784	=item B<< C<Pm = 8> >> I<unimplemented>
1565		1785
1566	=begin table	1786	=begin table
1567		1787
1568	B<< C<h> >> Auto-repeat Keys (DECARM)	1788	B<< C<h> >> Auto-repeat Keys (DECARM)
1569	B<< C<l> >> No Auto-repeat Keys (DECARM)	1789	B<< C<l> >> No Auto-repeat Keys (DECARM)
1570		1790
1571	=end table	1791	=end table
1572		1792
1573	=item B<< C<Ps = 9> >> X10 XTerm	1793	=item B<< C<Pm = 9> >> X10 XTerm
1574		1794
1575	=begin table	1795	=begin table
1576		1796
1577	B<< C<h> >> Send Mouse X & Y on button press.	1797	B<< C<h> >> Send Mouse X & Y on button press.
1578	B<< C<l> >> No mouse reporting.	1798	B<< C<l> >> No mouse reporting.
1579		1799
1580	=end table	1800	=end table
1581		1801
1582	=item B<< C<Ps = 25> >>	1802	=item B<< C<Pm = 25> >>
1583		1803
1584	=begin table	1804	=begin table
1585		1805
1586	B<< C<h> >> Visible cursor {cnorm/cvvis}	1806	B<< C<h> >> Visible cursor {cnorm/cvvis}
1587	B<< C<l> >> Invisible cursor {civis}	1807	B<< C<l> >> Invisible cursor {civis}
1588		1808
1589	=end table	1809	=end table
1590		1810
1591	=item B<< C<Ps = 30> >>	1811	=item B<< C<Pm = 30> >>
1592		1812
1593	=begin table	1813	=begin table
1594		1814
1595	B<< C<h> >> scrollBar visisble	1815	B<< C<h> >> scrollBar visisble
1596	B<< C<l> >> scrollBar invisisble	1816	B<< C<l> >> scrollBar invisisble
1597		1817
1598	=end table	1818	=end table
1599		1819
1600	=item B<< C<Ps = 35> >> (B<rxvt>)	1820	=item B<< C<Pm = 35> >> (B<rxvt>)
1601		1821
1602	=begin table	1822	=begin table
1603		1823
1604	B<< C<h> >> Allow XTerm Shift+key sequences	1824	B<< C<h> >> Allow XTerm Shift+key sequences
1605	B<< C<l> >> Disallow XTerm Shift+key sequences	1825	B<< C<l> >> Disallow XTerm Shift+key sequences
1606		1826
1607	=end table	1827	=end table
1608		1828
1609	=item B<< C<Ps = 38> >> I<unimplemented>	1829	=item B<< C<Pm = 38> >> I<unimplemented>
1610		1830
1611	Enter Tektronix Mode (DECTEK)	1831	Enter Tektronix Mode (DECTEK)
1612		1832
1613	=item B<< C<Ps = 40> >>	1833	=item B<< C<Pm = 40> >>
1614		1834
1615	=begin table	1835	=begin table
1616		1836
1617	B<< C<h> >> Allow 80/132 Mode	1837	B<< C<h> >> Allow 80/132 Mode
1618	B<< C<l> >> Disallow 80/132 Mode	1838	B<< C<l> >> Disallow 80/132 Mode
1619		1839
1620	=end table	1840	=end table
1621		1841
1622	=item B<< C<Ps = 44> >> I<unimplemented>	1842	=item B<< C<Pm = 44> >> I<unimplemented>
1623		1843
1624	=begin table	1844	=begin table
1625		1845
1626	B<< C<h> >> Turn On Margin Bell	1846	B<< C<h> >> Turn On Margin Bell
1627	B<< C<l> >> Turn Off Margin Bell	1847	B<< C<l> >> Turn Off Margin Bell
1628		1848
1629	=end table	1849	=end table
1630		1850
1631	=item B<< C<Ps = 45> >> I<unimplemented>	1851	=item B<< C<Pm = 45> >> I<unimplemented>
1632		1852
1633	=begin table	1853	=begin table
1634		1854
1635	B<< C<h> >> Reverse-wraparound Mode	1855	B<< C<h> >> Reverse-wraparound Mode
1636	B<< C<l> >> No Reverse-wraparound Mode	1856	B<< C<l> >> No Reverse-wraparound Mode
1637		1857
1638	=end table	1858	=end table
1639		1859
1640	=item B<< C<Ps = 46> >> I<unimplemented>	1860	=item B<< C<Pm = 46> >> I<unimplemented>
1641		1861
1642	=item B<< C<Ps = 47> >>	1862	=item B<< C<Pm = 47> >>
1643		1863
1644	=begin table	1864	=begin table
1645		1865
1646	B<< C<h> >> Use Alternate Screen Buffer	1866	B<< C<h> >> Use Alternate Screen Buffer
1647	B<< C<l> >> Use Normal Screen Buffer	1867	B<< C<l> >> Use Normal Screen Buffer
1648		1868
1649	=end table	1869	=end table
1650		1870
1651	X<Priv66>	1871	X<Priv66>
1652		1872
1653	=item B<< C<Ps = 66> >>	1873	=item B<< C<Pm = 66> >>
1654		1874
1655	=begin table	1875	=begin table
1656		1876
1657	B<< C<h> >> Application Keypad (DECPAM) == C<ESC =>	1877	B<< C<h> >> Application Keypad (DECPAM) == C<ESC =>
1658	B<< C<l> >> Normal Keypad (DECPNM) == C<< ESC > >>	1878	B<< C<l> >> Normal Keypad (DECPNM) == C<< ESC > >>
1659		1879
1660	=end table	1880	=end table
1661		1881
1662	=item B<< C<Ps = 67> >>	1882	=item B<< C<Pm = 67> >>
1663		1883
1664	=begin table	1884	=begin table
1665		1885
1666	B<< C<h> >> Backspace key sends B<< C<BS> (DECBKM) >>	1886	B<< C<h> >> Backspace key sends B<< C<BS> (DECBKM) >>
1667	B<< C<l> >> Backspace key sends B<< C<DEL> >>	1887	B<< C<l> >> Backspace key sends B<< C<DEL> >>
1668		1888
1669	=end table	1889	=end table
1670		1890
1671	=item B<< C<Ps = 1000> >> (X11 XTerm)	1891	=item B<< C<Pm = 1000> >> (X11 XTerm)
1672		1892
1673	=begin table	1893	=begin table
1674		1894
1675	B<< C<h> >> Send Mouse X & Y on button press and release.	1895	B<< C<h> >> Send Mouse X & Y on button press and release.
1676	B<< C<l> >> No mouse reporting.	1896	B<< C<l> >> No mouse reporting.
1677		1897
1678	=end table	1898	=end table
1679		1899
1680	=item B<< C<Ps = 1001> >> (X11 XTerm) I<unimplemented>	1900	=item B<< C<Pm = 1001> >> (X11 XTerm) I<unimplemented>
1681		1901
1682	=begin table	1902	=begin table
1683		1903
1684	B<< C<h> >> Use Hilite Mouse Tracking.	1904	B<< C<h> >> Use Hilite Mouse Tracking.
1685	B<< C<l> >> No mouse reporting.	1905	B<< C<l> >> No mouse reporting.
1686		1906
1687	=end table	1907	=end table
1688		1908
		1909	=item B<< C<Pm = 1002> >> (X11 XTerm)
		1910
		1911	=begin table
		1912
		1913	B<< C<h> >> Send Mouse X & Y on button press and release, and motion with a button pressed.
		1914	B<< C<l> >> No mouse reporting.
		1915
		1916	=end table
		1917
		1918	=item B<< C<Pm = 1003> >> (X11 XTerm)
		1919
		1920	=begin table
		1921
		1922	B<< C<h> >> Send Mouse X & Y on button press and release, and motion.
		1923	B<< C<l> >> No mouse reporting.
		1924
		1925	=end table
		1926
1689	=item B<< C<Ps = 1010> >> (B<rxvt>)	1927	=item B<< C<Pm = 1010> >> (B<rxvt>)
1690		1928
1691	=begin table	1929	=begin table
1692		1930
1693	B<< C<h> >> Don't scroll to bottom on TTY output	1931	B<< C<h> >> Don't scroll to bottom on TTY output
1694	B<< C<l> >> Scroll to bottom on TTY output	1932	B<< C<l> >> Scroll to bottom on TTY output
1695		1933
1696	=end table	1934	=end table
1697		1935
1698	=item B<< C<Ps = 1011> >> (B<rxvt>)	1936	=item B<< C<Pm = 1011> >> (B<rxvt>)
1699		1937
1700	=begin table	1938	=begin table
1701		1939
1702	B<< C<h> >> Scroll to bottom when a key is pressed	1940	B<< C<h> >> Scroll to bottom when a key is pressed
1703	B<< C<l> >> Don't scroll to bottom when a key is pressed	1941	B<< C<l> >> Don't scroll to bottom when a key is pressed
1704		1942
1705	=end table	1943	=end table
1706		1944
1707	=item B<< C<Ps = 1021> >> (B<rxvt>)	1945	=item B<< C<Pm = 1021> >> (B<rxvt>)
1708		1946
1709	=begin table	1947	=begin table
1710		1948
1711	B<< C<h> >> Bold/italic implies high intensity (see option B<-is>)	1949	B<< C<h> >> Bold/italic implies high intensity (see option B<-is>)
1712	B<< C<l> >> Font styles have no effect on intensity (Compile styles)	1950	B<< C<l> >> Font styles have no effect on intensity (Compile styles)
1713		1951
1714	=end table	1952	=end table
1715		1953
1716	=item B<< C<Ps = 1047> >>	1954	=item B<< C<Pm = 1047> >>
1717		1955
1718	=begin table	1956	=begin table
1719		1957
1720	B<< C<h> >> Use Alternate Screen Buffer	1958	B<< C<h> >> Use Alternate Screen Buffer
1721	B<< C<l> >> Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it	1959	B<< C<l> >> Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
1722		1960
1723	=end table	1961	=end table
1724		1962
1725	=item B<< C<Ps = 1048> >>	1963	=item B<< C<Pm = 1048> >>
1726		1964
1727	=begin table	1965	=begin table
1728		1966
1729	B<< C<h> >> Save cursor position	1967	B<< C<h> >> Save cursor position
1730	B<< C<l> >> Restore cursor position	1968	B<< C<l> >> Restore cursor position
1731		1969
1732	=end table	1970	=end table
1733		1971
1734	=item B<< C<Ps = 1049> >>	1972	=item B<< C<Pm = 1049> >>
1735		1973
1736	=begin table	1974	=begin table
1737		1975
1738	B<< C<h> >> Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it	1976	B<< C<h> >> Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it
1739	B<< C<l> >> Use Normal Screen Buffer	1977	B<< C<l> >> Use Normal Screen Buffer
…		…
1744		1982
1745	=back	1983	=back
1746		1984
1747	X<XTerm>	1985	X<XTerm>
1748		1986
1749	=head1 XTerm Operating System Commands	1987	=head2 XTerm Operating System Commands
1750		1988
1751	=over 4	1989	=over 4
1752		1990
1753	=item B<< C<ESC ] Ps;Pt ST> >>	1991	=item B<< C<ESC ] Ps;Pt ST> >>
1754		1992
…		…
1768	B<< C<Ps = 12> >> Change colour of text cursor foreground to B<< C<Pt> >>	2006	B<< C<Ps = 12> >> Change colour of text cursor foreground to B<< C<Pt> >>
1769	B<< C<Ps = 13> >> Change colour of mouse foreground to B<< C<Pt> >>	2007	B<< C<Ps = 13> >> Change colour of mouse foreground to B<< C<Pt> >>
1770	B<< C<Ps = 17> >> Change colour of highlight characters to B<< C<Pt> >>	2008	B<< C<Ps = 17> >> Change colour of highlight characters to B<< C<Pt> >>
1771	B<< C<Ps = 18> >> Change colour of bold characters to B<< C<Pt> >> [deprecated, see 706]	2009	B<< C<Ps = 18> >> Change colour of bold characters to B<< C<Pt> >> [deprecated, see 706]
1772	B<< C<Ps = 19> >> Change colour of underlined characters to B<< C<Pt> >> [deprecated, see 707]	2010	B<< C<Ps = 19> >> Change colour of underlined characters to B<< C<Pt> >> [deprecated, see 707]
1773	B<< C<Ps = 20> >> Change background pixmap parameters (see section XPM) (Compile XPM).	2011	B<< C<Ps = 20> >> Change background pixmap parameters (see section BACKGROUND IMAGE) (Compile AfterImage).
1774	B<< C<Ps = 39> >> Change default foreground colour to B<< C<Pt> >>.	2012	B<< C<Ps = 39> >> Change default foreground colour to B<< C<Pt> >>.
1775	B<< C<Ps = 46> >> Change Log File to B<< C<Pt> >> I<unimplemented>	2013	B<< C<Ps = 46> >> Change Log File to B<< C<Pt> >> I<unimplemented>
1776	B<< C<Ps = 49> >> Change default background colour to B<< C<Pt> >>.	2014	B<< C<Ps = 49> >> Change default background colour to B<< C<Pt> >>.
1777	B<< C<Ps = 50> >> Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>	2015	B<< C<Ps = 50> >> Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>
1778	B<< C<Ps = 55> >> Log all scrollback buffer and all of screen to B<< C<Pt> >>	2016	B<< C<Ps = 55> >> Log all scrollback buffer and all of screen to B<< C<Pt> >>
…		…
1792		2030
1793	=end table	2031	=end table
1794		2032
1795	=back	2033	=back
1796		2034
1797	X<XPM>	2035	=head1 BACKGROUND IMAGE
1798		2036
1799	=head1 XPM
1800
1801	For the XPM XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value	2037	For the BACGROUND IMAGE XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value
1802	of B<< C<Pt> >> can be the name of the background pixmap followed by a	2038	of B<< C<Pt> >> can be the name of the background image file followed by a
1803	sequence of scaling/positioning commands separated by semi-colons. The	2039	sequence of scaling/positioning commands separated by semi-colons. The
1804	scaling/positioning commands are as follows:	2040	scaling/positioning commands are as follows:
1805		2041
1806	=over 4	2042	=over 4
1807		2043
…		…
1845		2081
1846	For example:	2082	For example:
1847		2083
1848	=over 4	2084	=over 4
1849		2085
1850	=item B<\E]20;funky\a>	2086	=item B<\E]20;funky.jpg\a>
1851		2087
1852	load B<funky.xpm> as a tiled image	2088	load B<funky.jpg> as a tiled image
1853		2089
1854	=item B<\E]20;mona;100\a>	2090	=item B<\E]20;mona.jpg;100\a>
1855		2091
1856	load B<mona.xpm> with a scaling of 100%	2092	load B<mona.jpg> with a scaling of 100%
1857		2093
1858	=item B<\E]20;;200;?\a>	2094	=item B<\E]20;;200;?\a>
1859		2095
1860	rescale the current pixmap to 200% and display the image geometry in	2096	rescale the current pixmap to 200% and display the image geometry in
1861	the title	2097	the title
…		…
1900	=begin table	2136	=begin table
1901		2137
1902	4 Shift	2138	4 Shift
1903	8 Meta	2139	8 Meta
1904	16 Control	2140	16 Control
1905	32 Double Click I<(Rxvt extension)>	2141	32 Double Click I<(rxvt extension)>
1906		2142
1907	=end table	2143	=end table
1908		2144
1909	Col = B<< C<< <x> - SPACE >> >>	2145	Col = B<< C<< <x> - SPACE >> >>
1910		2146
…		…
1988		2224
1989	=head1 CONFIGURE OPTIONS	2225	=head1 CONFIGURE OPTIONS
1990		2226
1991	General hint: if you get compile errors, then likely your configuration	2227	General hint: if you get compile errors, then likely your configuration
1992	hasn't been tested well. Either try with C<--enable-everything> or use	2228	hasn't been tested well. Either try with C<--enable-everything> or use
1993	the F<./reconf> script as a base for experiments. F<./reconf> is used by	2229	the default configuration (i.e. no C<--enable-xxx> or C<--disable-xxx>
1994	myself, so it should generally be a working config. Of course, you should	2230	switches). Of course, you should always report when a combination doesn't
1995	always report when a combination doesn't work, so it can be fixed. Marc	2231	work, so it can be fixed. Marc Lehmann <rxvt@schmorp.de>.
1996	Lehmann <rxvt@schmorp.de>.
1997		2232
1998	All	2233	All
1999		2234
2000	=over 4	2235	=over 4
2001		2236
…		…
2033		2268
2034	=begin table	2269	=begin table
2035		2270
2036	all all available codeset groups	2271	all all available codeset groups
2037	zh common chinese encodings	2272	zh common chinese encodings
2038	zh_ext rarely used but very big chinese encodigs	2273	zh_ext rarely used but very big chinese encodings
2039	jp common japanese encodings	2274	jp common japanese encodings
2040	jp_ext rarely used but big japanese encodings	2275	jp_ext rarely used but big japanese encodings
2041	kr korean encodings	2276	kr korean encodings
2042		2277
2043	=end table	2278	=end table
…		…
2057	requirements per character from 2 to 4 bytes. X11 fonts do not yet	2292	requirements per character from 2 to 4 bytes. X11 fonts do not yet
2058	support these extra characters, but Xft does.	2293	support these extra characters, but Xft does.
2059		2294
2060	Please note that rxvt-unicode can store unicode code points >65535	2295	Please note that rxvt-unicode can store unicode code points >65535
2061	even without this flag, but the number of such characters is	2296	even without this flag, but the number of such characters is
2062	limited to a view thousand (shared with combining characters,	2297	limited to a few thousand (shared with combining characters,
2063	see next switch), and right now rxvt-unicode cannot display them	2298	see next switch), and right now rxvt-unicode cannot display them
2064	(input/output and cut&paste still work, though).	2299	(input/output and cut&paste still work, though).
2065		2300
2066	=item --enable-combining (default: on)	2301	=item --enable-combining (default: on)
2067		2302
…		…
2113		2348
2114	Write user and tty to lastlog file (used by programs like	2349	Write user and tty to lastlog file (used by programs like
2115	F<lastlogin>) at start of rxvt execution. This option requires	2350	F<lastlogin>) at start of rxvt execution. This option requires
2116	--enable-utmp to also be specified.	2351	--enable-utmp to also be specified.
2117		2352
2118	=item --enable-xpm-background (default: on)	2353	=item --enable-afterimage (default: on)
2119		2354
2120	Add support for XPM background pixmaps.	2355	Add support for libAfterImage to be used for transparency and background
		2356	images. It adds support for many file formats including JPG, PNG,
		2357	SVG, TIFF, GIF, XPM, BMP, ICO, XCF, TGA and AfterStep image XML
		2358	(L<http://www.afterstep.org/visualdoc.php?show=asimagexml>).
		2359
		2360	This option also adds such eye candy as blending an image over the root
		2361	background, as well as dynamic scaling and bluring of background images.
		2362
		2363	Note that with this option enabled, @@RXVT_NAME@@'s memory footprint might
		2364	increase by a few megabytes even if no extra features are used (mostly due
		2365	to third-party libraries used by libAI). Memory footprint may somewhat be
		2366	lowered if libAfterImage is configured without support for SVG.
2121		2367
2122	=item --enable-transparency (default: on)	2368	=item --enable-transparency (default: on)
2123		2369
2124	Add support for inheriting parent backgrounds thus giving a fake	2370	Add support for backgrounds, creating illusion of transparency in the term.
2125	transparency to the term.
2126		2371
2127	=item --enable-fading (default: on)	2372	=item --enable-fading (default: on)
2128		2373
2129	Add support for fading the text when focus is lost (requires C<--enable-transparency>).	2374	Add support for fading the text when focus is lost.
2130
2131	=item --enable-tinting (default: on)
2132
2133	Add support for tinting of transparent backgrounds (requires C<--enable-transparency>).
2134		2375
2135	=item --enable-rxvt-scroll (default: on)	2376	=item --enable-rxvt-scroll (default: on)
2136		2377
2137	Add support for the original rxvt scrollbar.	2378	Add support for the original rxvt scrollbar.
2138		2379
…		…
2181	A non-exhaustive list of features enabled by C<--enable-frills> (possibly	2422	A non-exhaustive list of features enabled by C<--enable-frills> (possibly
2182	in combination with other switches) is:	2423	in combination with other switches) is:
2183		2424
2184	MWM-hints	2425	MWM-hints
2185	EWMH-hints (pid, utf8 names) and protocols (ping)	2426	EWMH-hints (pid, utf8 names) and protocols (ping)
		2427	urgency hint
2186	seperate underline colour (-underlineColor)	2428	seperate underline colour (-underlineColor)
2187	settable border widths and borderless switch (-w, -b, -bl)	2429	settable border widths and borderless switch (-w, -b, -bl)
2188	visual depth selection (-depth)	2430	visual depth selection (-depth)
2189	settable extra linespacing /-lsp)	2431	settable extra linespacing /-lsp)
2190	iso-14755-2 and -3, and visual feedback	2432	iso-14755 5.1 (basic) support
2191	tripleclickwords (-tcw)	2433	tripleclickwords (-tcw)
2192	settable insecure mode (-insecure)	2434	settable insecure mode (-insecure)
2193	keysym remapping support	2435	keysym remapping support
2194	cursor blinking and underline cursor (-cb, -uc)	2436	cursor blinking and underline cursor (-cb, -uc)
2195	XEmbed support (-embed)	2437	XEmbed support (-embed)
2196	user-pty (-pty-fd)	2438	user-pty (-pty-fd)
2197	hold on exit (-hold)	2439	hold on exit (-hold)
2198	skip builtin block graphics (-sbg)	2440	skip builtin block graphics (-sbg)
		2441	separate highlightcolor support (-hc)
2199		2442
2200	It also enabled some non-essential features otherwise disabled, such as:	2443	It also enables some non-essential features otherwise disabled, such as:
2201		2444
2202	some round-trip time optimisations	2445	some round-trip time optimisations
2203	nearest color allocation on pseudocolor screens	2446	nearest color allocation on pseudocolor screens
2204	UTF8_STRING supporr for selection	2447	UTF8_STRING support for selection
2205	sgr modes 90..97 and 100..107	2448	sgr modes 90..97 and 100..107
2206	backindex and forwardindex escape sequences	2449	backindex and forwardindex escape sequences
2207	view change/zero scorllback esacpe sequences	2450	view change/zero scrollback escape sequences
2208	locale switching escape sequence	2451	locale switching escape sequence
2209	window op and some xterm/OSC escape sequences	2452	window op and some xterm/OSC escape sequences
2210	rectangular selections	2453	rectangular selections
2211	trailing space removal for selections	2454	trailing space removal for selections
2212	verbose X error handling	2455	verbose X error handling
…		…
2221	=item --enable-keepscrolling (default: on)	2464	=item --enable-keepscrolling (default: on)
2222		2465
2223	Add support for continual scrolling of the display when you hold	2466	Add support for continual scrolling of the display when you hold
2224	the mouse button down on a scrollbar arrow.	2467	the mouse button down on a scrollbar arrow.
2225		2468
		2469	=item --enable-selectionscrolling (default: on)
		2470
		2471	Add support for scrolling when the selection moves to the top or
		2472	bottom of the screen.
		2473
2226	=item --enable-mousewheel (default: on)	2474	=item --enable-mousewheel (default: on)
2227		2475
2228	Add support for scrolling via mouse wheel or buttons 4 & 5.	2476	Add support for scrolling via mouse wheel or buttons 4 & 5.
2229		2477
2230	=item --enable-slipwheeling (default: on)	2478	=item --enable-slipwheeling (default: on)
2231		2479
2232	Add support for continual scrolling (using the mouse wheel as an	2480	Add support for continual scrolling (using the mouse wheel as an
2233	accelerator) while the control key is held down. This option	2481	accelerator) while the control key is held down. This option
2234	requires --enable-mousewheel to also be specified.	2482	requires --enable-mousewheel to also be specified.
2235		2483
2236	=item --disable-new-selection
2237
2238	Remove support for mouse selection style like that of xterm.
2239
2240	=item --enable-dmalloc (default: off)
2241
2242	Use Gray Watson's malloc - which is good for debugging See
2243	http://www.letters.com/dmalloc/ for details If you use either this or the
2244	next option, you may need to edit src/Makefile after compiling to point
2245	DINCLUDE and DLIB to the right places.
2246
2247	You can only use either this option and the following (should
2248	you use either) .
2249
2250	=item --enable-dlmalloc (default: off)
2251
2252	Use Doug Lea's malloc - which is good for a production version
2253	See L<http://g.oswego.edu/dl/html/malloc.html> for details.
2254
2255	=item --enable-smart-resize (default: on)	2484	=item --enable-smart-resize (default: off)
2256		2485
2257	Add smart growth/shrink behaviour when changing font size via hot	2486	Add smart growth/shrink behaviour when resizing.
2258	keys. This should keep the window corner which is closest to a corner of	2487	This should keep the window corner which is closest to a corner of
2259	the screen in a fixed position.	2488	the screen in a fixed position.
2260		2489
2261	=item --enable-pointer-blank (default: on)	2490	=item --enable-pointer-blank (default: on)
2262		2491
2263	Add support to have the pointer disappear when typing or inactive.	2492	Add support to have the pointer disappear when typing or inactive.
2264		2493
2265	=item --enable-perl (default: on)	2494	=item --enable-perl (default: on)
2266		2495
2267	Enable an embedded perl interpreter. See the B<@@RXVT_NAME@@perl(3)>	2496	Enable an embedded perl interpreter. See the B<@@RXVT_NAME@@perl(3)>
2268	manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the files	2497	manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the
2269	in F<src/perl-ext/> for the extensions that are installed by default. The	2498	files in F<src/perl-ext/> for the extensions that are installed by
2270	perl interpreter that is used can be specified via the C<PERL> environment	2499	default. The perl interpreter that is used can be specified via the
2271	variable when running configure.	2500	C<PERL> environment variable when running configure. Even when compiled
		2501	in, perl will I<not> be initialised when all extensions have been disabled
		2502	C<-pe "" --perl-ext-common "">, so it should be safe to enable from a
		2503	resource standpoint.
		2504
		2505	=item --with-afterimage-config=DIR
		2506
		2507	Look for the libAfterImage config script in DIR.
2272		2508
2273	=item --with-name=NAME (default: urxvt)	2509	=item --with-name=NAME (default: urxvt)
2274		2510
2275	Set the basename for the installed binaries, resulting	2511	Set the basename for the installed binaries, resulting
2276	in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with	2512	in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with
…		…
2286	PATH.	2522	PATH.
2287		2523
2288	=item --with-x	2524	=item --with-x
2289		2525
2290	Use the X Window System (pretty much default, eh?).	2526	Use the X Window System (pretty much default, eh?).
2291
2292	=item --with-xpm-includes=DIR
2293
2294	Look for the XPM includes in DIR.
2295
2296	=item --with-xpm-library=DIR
2297
2298	Look for the XPM library in DIR.
2299
2300	=item --with-xpm
2301
2302	Not needed - define via --enable-xpm-background.
2303		2527
2304	=back	2528	=back
2305		2529
2306	=head1 AUTHORS	2530	=head1 AUTHORS
2307		2531

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines