ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.7.pod
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.58 by root, Wed Jul 13 02:24:02 2005 UTC vs.
Revision 1.64 by root, Sat Dec 24 12:55:17 2005 UTC

… …
24 24
25=head1 FREQUENTLY ASKED QUESTIONS 25=head1 FREQUENTLY ASKED QUESTIONS
26 26
27=over 4 27=over 4
28 28
29=item Isn't rxvt supposed to be small? Don't all those features bloat?
30
31I often get asked about this, and I think, no, they didn't cause extra
32bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
33that the urxvt binary is larger (due to some encoding tables always being
34compiled in), but it actually uses less memory (RSS) after startup. Even
35with C<--disable-everything>, this comparison is a bit unfair, as many
36features unique to urxvt (locale, encoding conversion, iso14755 etc.) are
37already in use in this mode.
38
39 text data bss drs rss filename
40 98398 1664 24 15695 1824 rxvt --disable-everything
41 188985 9048 66616 18222 1788 urxvt --disable-everything
42
43When you C<--enable-everything> (which _is_ unfair, as this involves xft
44and full locale/XIM support which are quite bloaty inside libX11 and my
45libc), the two diverge, but not unreasnobaly so.
46
47 text data bss drs rss filename
48 163431 2152 24 20123 2060 rxvt --enable-everything
49 1035683 49680 66648 29096 3680 urxvt --enable-everything
50
51The very large size of the text section is explained by the east-asian
52encoding tables, which, if unused, take up disk space but nothing else
53and can be compiled out unless you rely on X11 core fonts that use those
54encodings. The BSS size comes from the 64k emergency buffer that my c++
55compiler allocates (but of course doesn't use unless you are out of
56memory). Also, using an xft font instead of a core font immediately adds a
57few megabytes of RSS. Xft indeed is responsible for a lot of RSS even when
58not used.
59
60Of course, due to every character using two or four bytes instead of one,
61a large scrollback buffer will ultimately make rxvt-unicode use more
62memory.
63
64Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), this
65still fares rather well. And compared to some monsters like gnome-terminal
66(21152k + extra 4204k in separate processes) or konsole (22200k + extra
6743180k in daemons that stay around after exit, plus half aminute of
68startup time, including the hundreds of warnings it spits out), it fares
69extremely well *g*.
70
71=item Why C++, isn't that unportable/bloated/uncool?
72
73Is this a question? :) It comes up very often. The simple answer is: I had
74to write it, and C++ allowed me to write and maintain it in a fraction
75of the time and effort (which is a scarce resource for me). Put even
76shorter: It simply wouldn't exist without C++.
77
78My personal stance on this is that C++ is less portable than C, but in
79the case of rxvt-unicode this hardly matters, as its portability limits
80are defined by things like X11, pseudo terminals, locale support and unix
81domain sockets, which are all less portable than C++ itself.
82
83Regarding the bloat, see the above question: It's easy to write programs
84in C that use gobs of memory, an certainly possible to write programs in
85C++ that don't. C++ also often comes with large libraries, but this is
86not necessarily the case with GCC. Here is what rxvt links against on my
87system with a minimal config:
88
89 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
90 libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000)
91 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000)
92 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
93
94And here is rxvt-unicode:
95
96 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
97 libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
98 libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
99 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
100 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
101
102No large bloated libraries (of course, none were linked in statically),
103except maybe libX11 :)
104
105=item Does it support tabs, can I have a tabbed rxvt-unicode?
106
107rxvt-unicode does not directly support tabs. It will work fine with
108tabbing functionality of many window managers or similar tabbing programs,
109and its embedding-features allow it to be embedded into other programs,
110as witnessed by F<doc/rxvt-tabbed> or the upcoming C<Gtk2::URxvt> perl
111module, which features a tabbed urxvt (murxvt) terminal as an example
112embedding application.
113
29=item How do I know which rxvt-unicode version I'm using? 114=item How do I know which rxvt-unicode version I'm using?
30 115
31The version number is displayed with the usage (-h). Also the escape 116The version number is displayed with the usage (-h). Also the escape
32sequence C<ESC [ 8 n> sets the window title to the version number. 117sequence C<ESC [ 8 n> sets the window title to the version number. When
118using the @@RXVT_NAME@@c client, the version displayed is that of the
119daemon.
33 120
34=item I am using Debian GNU/Linux and have a problem... 121=item I am using Debian GNU/Linux and have a problem...
35 122
36The Debian GNU/Linux package of rxvt-unicode in sarge contains large 123The Debian GNU/Linux package of rxvt-unicode in sarge contains large
37patches that considerably change the behaviour of rxvt-unicode. Before 124patches that considerably change the behaviour of rxvt-unicode. Before
… …
487 574
488=item Can I speed up Xft rendering somehow? 575=item Can I speed up Xft rendering somehow?
489 576
490Yes, the most obvious way to speed it up is to avoid Xft entirely, as 577Yes, the most obvious way to speed it up is to avoid Xft entirely, as
491it is simply slow. If you still want Xft fonts you might try to disable 578it is simply slow. If you still want Xft fonts you might try to disable
492antialiasing (by appending C<:antialiasing=false>), which saves lots of 579antialiasing (by appending C<:antialias=false>), which saves lots of
493memory and also speeds up rendering considerably. 580memory and also speeds up rendering considerably.
494 581
495=item Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? 582=item Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
496 583
497Rxvt-unicode will use whatever you specify as a font. If it needs to 584Rxvt-unicode will use whatever you specify as a font. If it needs to
… …
575 URxvt.color7: #e1dddd 662 URxvt.color7: #e1dddd
576 URxvt.color15: #e1dddd 663 URxvt.color15: #e1dddd
577 664
578=item How can I start @@RXVT_NAME@@d in a race-free way? 665=item How can I start @@RXVT_NAME@@d in a race-free way?
579 666
580Despite it's name, @@RXVT_NAME@@d is not a real daemon, but more like a 667Try C<@@RXVT_NAME@@d -f -o>, which tells @@RXVT_NAME@@d to open the
581server that answers @@RXVT_NAME@@c's requests, so it doesn't background 668display, create the listening socket and then fork.
582itself.
583
584To ensure @@RXVT_NAME@@d is listening on it's socket, you can use the
585following method to wait for the startup message before continuing:
586
587 { @@RXVT_NAME@@d & } | read
588 669
589=item What's with the strange Backspace/Delete key behaviour? 670=item What's with the strange Backspace/Delete key behaviour?
590 671
591Assuming that the physical Backspace key corresponds to the 672Assuming that the physical Backspace key corresponds to the
592BackSpace keysym (not likely for Linux ... see the following 673BackSpace keysym (not likely for Linux ... see the following
… …
2191=end table 2272=end table
2192 2273
2193=head1 CONFIGURE OPTIONS 2274=head1 CONFIGURE OPTIONS
2194 2275
2195General hint: if you get compile errors, then likely your configuration 2276General hint: if you get compile errors, then likely your configuration
2196hasn't been tested well. Either try with --enable-everything or use the 2277hasn't been tested well. Either try with C<--enable-everything> or use
2197./reconf script as a base for experiments. ./reconf is used by myself, 2278the F<./reconf> script as a base for experiments. F<./reconf> is used by
2198so it should generally be a working config. Of course, you should always 2279myself, so it should generally be a working config. Of course, you should
2199report when a combination doesn't work, so it can be fixed. Marc Lehmann 2280always report when a combination doesn't work, so it can be fixed. Marc
2200<rxvt@schmorp.de>. 2281Lehmann <rxvt@schmorp.de>.
2282
2283All
2201 2284
2202=over 4 2285=over 4
2203 2286
2204=item --enable-everything 2287=item --enable-everything
2205 2288
2206Add support for all non-multichoice options listed in "./configure 2289Add (or remove) support for all non-multichoice options listed in "./configure
2207--help". Note that unlike other enable options this is order dependant. 2290--help".
2291
2208You can specify this and then disable options which this enables by 2292You can specify this and then disable options you do not like by
2209I<following> this with the appropriate commands. 2293I<following> this with the appropriate C<--disable-...> arguments,
2294or you can start with a minimal configuration by specifying
2295C<--disable-everything> and than adding just the C<--enable-...> arguments
2296you want.
2210 2297
2211=item --enable-xft 2298=item --enable-xft (default: enabled)
2212 2299
2213Add support for Xft (anti-aliases, among others) fonts. Xft fonts are 2300Add support for Xft (anti-aliases, among others) fonts. Xft fonts are
2214slower and require lots of memory, but as long as you don't use them, you 2301slower and require lots of memory, but as long as you don't use them, you
2215don't pay for them. 2302don't pay for them.
2216 2303
2217=item --enable-font-styles 2304=item --enable-font-styles (default: on)
2218 2305
2219Add support for B<bold>, I<italic> and B<< I<bold italic> >> font 2306Add support for B<bold>, I<italic> and B<< I<bold italic> >> font
2220styles. The fonts can be set manually or automatically. 2307styles. The fonts can be set manually or automatically.
2221 2308
2222=item --with-codesets=NAME,... 2309=item --with-codesets=NAME,... (default: all)
2223 2310
2224Compile in support for additional codeset (encoding) groups (C<eu>, C<vn> 2311Compile in support for additional codeset (encoding) groups (C<eu>, C<vn>
2225are always compiled in, which includes most 8-bit character sets). These 2312are always compiled in, which includes most 8-bit character sets). These
2226codeset tables are used for driving X11 core fonts, they are not required 2313codeset tables are used for driving X11 core fonts, they are not required
2227for Xft fonts, although having them compiled in lets rxvt-unicode choose 2314for Xft fonts, although having them compiled in lets rxvt-unicode choose
… …
2238 jp_ext rarely used but big japanese encodings 2325 jp_ext rarely used but big japanese encodings
2239 kr korean encodings 2326 kr korean encodings
2240 2327
2241=end table 2328=end table
2242 2329
2243=item --enable-xim 2330=item --enable-xim (default: on)
2244 2331
2245Add support for XIM (X Input Method) protocol. This allows using 2332Add support for XIM (X Input Method) protocol. This allows using
2246alternative input methods (e.g. kinput2) and will also correctly 2333alternative input methods (e.g. kinput2) and will also correctly
2247set up the input for people using dead keys or compose keys. 2334set up the input for people using dead keys or compose keys.
2248 2335
2249=item --enable-unicode3 2336=item --enable-unicode3 (default: off)
2250 2337
2251Enable direct support for displaying unicode codepoints above 2338Enable direct support for displaying unicode codepoints above
225265535 (the basic multilingual page). This increases storage 233965535 (the basic multilingual page). This increases storage
2253requirements per character from 2 to 4 bytes. X11 fonts do not yet 2340requirements per character from 2 to 4 bytes. X11 fonts do not yet
2254support these extra characters, but Xft does. 2341support these extra characters, but Xft does.
… …
2257even without this flag, but the number of such characters is 2344even without this flag, but the number of such characters is
2258limited to a view thousand (shared with combining characters, 2345limited to a view thousand (shared with combining characters,
2259see next switch), and right now rxvt-unicode cannot display them 2346see next switch), and right now rxvt-unicode cannot display them
2260(input/output and cut&paste still work, though). 2347(input/output and cut&paste still work, though).
2261 2348
2262=item --enable-combining 2349=item --enable-combining (default: on)
2263 2350
2264Enable automatic composition of combining characters into 2351Enable automatic composition of combining characters into
2265composite characters. This is required for proper viewing of text 2352composite characters. This is required for proper viewing of text
2266where accents are encoded as seperate unicode characters. This is 2353where accents are encoded as seperate unicode characters. This is
2267done by using precomposited characters when available or creating 2354done by using precomposited characters when available or creating
… …
2277 2364
2278The combining table also contains entries for arabic presentation forms, 2365The combining table also contains entries for arabic presentation forms,
2279but these are not currently used. Bug me if you want these to be used (and 2366but these are not currently used. Bug me if you want these to be used (and
2280tell me how these are to be used...). 2367tell me how these are to be used...).
2281 2368
2282=item --enable-fallback(=CLASS) 2369=item --enable-fallback(=CLASS) (default: Rxvt)
2283 2370
2284When reading resource settings, also read settings for class CLASS 2371When reading resource settings, also read settings for class CLASS. To disable resource fallback use --disable-fallback.
2285(default: Rxvt). To disable resource fallback use --disable-fallback.
2286 2372
2287=item --with-res-name=NAME 2373=item --with-res-name=NAME (default: urxvt)
2288 2374
2289Use the given name (default: urxvt) as default application name when 2375Use the given name as default application name when
2290reading resources. Specify --with-res-name=rxvt to replace rxvt. 2376reading resources. Specify --with-res-name=rxvt to replace rxvt.
2291 2377
2292=item --with-res-class=CLASS 2378=item --with-res-class=CLASS /default: URxvt)
2293 2379
2294Use the given class (default: URxvt) as default application class 2380Use the given class as default application class
2295when reading resources. Specify --with-res-class=Rxvt to replace 2381when reading resources. Specify --with-res-class=Rxvt to replace
2296rxvt. 2382rxvt.
2297 2383
2298=item --enable-utmp 2384=item --enable-utmp (default: on)
2299 2385
2300Write user and tty to utmp file (used by programs like F<w>) at 2386Write user and tty to utmp file (used by programs like F<w>) at
2301start of rxvt execution and delete information when rxvt exits. 2387start of rxvt execution and delete information when rxvt exits.
2302 2388
2303=item --enable-wtmp 2389=item --enable-wtmp (default: on)
2304 2390
2305Write user and tty to wtmp file (used by programs like F<last>) at 2391Write user and tty to wtmp file (used by programs like F<last>) at
2306start of rxvt execution and write logout when rxvt exits. This 2392start of rxvt execution and write logout when rxvt exits. This
2307option requires --enable-utmp to also be specified. 2393option requires --enable-utmp to also be specified.
2308 2394
2309=item --enable-lastlog 2395=item --enable-lastlog (default: on)
2310 2396
2311Write user and tty to lastlog file (used by programs like 2397Write user and tty to lastlog file (used by programs like
2312F<lastlogin>) at start of rxvt execution. This option requires 2398F<lastlogin>) at start of rxvt execution. This option requires
2313--enable-utmp to also be specified. 2399--enable-utmp to also be specified.
2314 2400
2315=item --enable-xpm-background 2401=item --enable-xpm-background (default: off)
2316 2402
2317Add support for XPM background pixmaps. 2403Add support for XPM background pixmaps.
2318 2404
2319=item --enable-transparency 2405=item --enable-transparency (default: off)
2320 2406
2321Add support for inheriting parent backgrounds thus giving a fake 2407Add support for inheriting parent backgrounds thus giving a fake
2322transparency to the term. 2408transparency to the term.
2323 2409
2324=item --enable-fading 2410=item --enable-fading (default: on)
2325 2411
2326Add support for fading the text when focus is lost. 2412Add support for fading the text when focus is lost (requires C<--enable-transparency>).
2327 2413
2328=item --enable-tinting 2414=item --enable-tinting (default: on)
2329 2415
2330Add support for tinting of transparent backgrounds. 2416Add support for tinting of transparent backgrounds (requires C<--enable-transparency>).
2331 2417
2332=item --enable-menubar 2418=item --enable-menubar (default: off)
2333 2419
2334Add support for our menu bar system (this interacts badly with 2420Add support for our menu bar system (this interacts badly with
2335dynamic locale switching currently). 2421dynamic locale switching currently).
2336 2422
2337=item --enable-rxvt-scroll 2423=item --enable-rxvt-scroll (default: on)
2338 2424
2339Add support for the original rxvt scrollbar. 2425Add support for the original rxvt scrollbar.
2340 2426
2341=item --enable-next-scroll 2427=item --enable-next-scroll (default: on)
2342 2428
2343Add support for a NeXT-like scrollbar. 2429Add support for a NeXT-like scrollbar.
2344 2430
2345=item --enable-xterm-scroll 2431=item --enable-xterm-scroll (default: on)
2346 2432
2347Add support for an Xterm-like scrollbar. 2433Add support for an Xterm-like scrollbar.
2348 2434
2349=item --enable-plain-scroll 2435=item --enable-plain-scroll (default: on)
2350 2436
2351Add support for a very unobtrusive, plain-looking scrollbar that 2437Add support for a very unobtrusive, plain-looking scrollbar that
2352is the favourite of the rxvt-unicode author, having used it for 2438is the favourite of the rxvt-unicode author, having used it for
2353many years. 2439many years.
2354 2440
2355=item --enable-half-shadow 2441=item --enable-half-shadow (default: off)
2356 2442
2357Make shadows on the scrollbar only half the normal width & height. 2443Make shadows on the scrollbar only half the normal width & height.
2358only applicable to rxvt scrollbars. 2444only applicable to rxvt scrollbars.
2359 2445
2360=item --enable-ttygid 2446=item --enable-ttygid (default: off)
2361 2447
2362Change tty device setting to group "tty" - only use this if 2448Change tty device setting to group "tty" - only use this if
2363your system uses this type of security. 2449your system uses this type of security.
2364 2450
2365=item --disable-backspace-key 2451=item --disable-backspace-key
2366 2452
2367Disable any handling of the backspace key by us - let the X server 2453Removes any handling of the backspace key by us - let the X server do it.
2454
2455=item --disable-delete-key
2456
2457Removes any handling of the delete key by us - let the X server
2368do it. 2458do it.
2369 2459
2370=item --disable-delete-key
2371
2372Disable any handling of the delete key by us - let the X server
2373do it.
2374
2375=item --disable-resources 2460=item --disable-resources
2376 2461
2377Remove all resources checking. 2462Removes any support for resource checking.
2378 2463
2379=item --enable-xgetdefault 2464=item --enable-xgetdefault
2380 2465
2381Make resources checking via XGetDefault() instead of our small 2466Make resources checking via XGetDefault() instead of our small
2382version which only checks ~/.Xdefaults, or if that doesn't exist then 2467version which only checks ~/.Xdefaults, or if that doesn't exist then
… …
2384 2469
2385Please note that nowadays, things like XIM will automatically pull in and 2470Please note that nowadays, things like XIM will automatically pull in and
2386use the full X resource manager, so the overhead of using it might be very 2471use the full X resource manager, so the overhead of using it might be very
2387small, if nonexistant. 2472small, if nonexistant.
2388 2473
2389=item --enable-strings 2474=item --enable-strings (default: off)
2390 2475
2391Add support for our possibly faster memset() function and other 2476Add support for our possibly faster memset() function and other
2392various routines, overriding your system's versions which may 2477various routines, overriding your system's versions which may
2393have been hand-crafted in assembly or may require extra libraries 2478have been hand-crafted in assembly or may require extra libraries
2394to link in. (this breaks ANSI-C rules and has problems on many 2479to link in. (this breaks ANSI-C rules and has problems on many
2395GNU/Linux systems). 2480GNU/Linux systems).
2396 2481
2397=item --disable-swapscreen 2482=item --disable-swapscreen
2398 2483
2399Remove support for swap screen. 2484Remove support for secondary/swap screen.
2400 2485
2401=item --enable-frills 2486=item --enable-frills (default: on)
2402 2487
2403Add support for many small features that are not essential but nice to 2488Add support for many small features that are not essential but nice to
2404have. Normally you want this, but for very small binaries you may want to 2489have. Normally you want this, but for very small binaries you may want to
2405disable this. 2490disable this.
2406 2491
… …
2417 window op and some xterm/OSC escape sequences 2502 window op and some xterm/OSC escape sequences
2418 tripleclickwords 2503 tripleclickwords
2419 settable insecure mode 2504 settable insecure mode
2420 keysym remapping support 2505 keysym remapping support
2421 cursor blinking and underline cursor 2506 cursor blinking and underline cursor
2422 -embed and -pty-fd options 2507 -embed, -pty-fd and -hold options
2423 2508
2424=item --enable-iso14755 2509=item --enable-iso14755 (default: on)
2425 2510
2426Enable extended ISO 14755 support (see @@RXVT_NAME@@(1), or 2511Enable extended ISO 14755 support (see @@RXVT_NAME@@(1), or
2427F<doc/rxvt.1.txt>). Basic support (section 5.1) is enabled by 2512F<doc/rxvt.1.txt>). Basic support (section 5.1) is enabled by
2428C<--enable-frills>, while support for 5.2, 5.3 and 5.4 is enabled with 2513C<--enable-frills>, while support for 5.2, 5.3 and 5.4 is enabled with
2429this switch. 2514this switch.
2430 2515
2431=item --enable-keepscrolling 2516=item --enable-keepscrolling (default: on)
2432 2517
2433Add support for continual scrolling of the display when you hold 2518Add support for continual scrolling of the display when you hold
2434the mouse button down on a scrollbar arrow. 2519the mouse button down on a scrollbar arrow.
2435 2520
2436=item --enable-mousewheel 2521=item --enable-mousewheel (default: on)
2437 2522
2438Add support for scrolling via mouse wheel or buttons 4 & 5. 2523Add support for scrolling via mouse wheel or buttons 4 & 5.
2439 2524
2440=item --enable-slipwheeling 2525=item --enable-slipwheeling (default: on)
2441 2526
2442Add support for continual scrolling (using the mouse wheel as an 2527Add support for continual scrolling (using the mouse wheel as an
2443accelerator) while the control key is held down. This option 2528accelerator) while the control key is held down. This option
2444requires --enable-mousewheel to also be specified. 2529requires --enable-mousewheel to also be specified.
2445 2530
2446=item --disable-new-selection 2531=item --disable-new-selection
2447 2532
2448Remove support for mouse selection style like that of xterm. 2533Remove support for mouse selection style like that of xterm.
2449 2534
2450=item --enable-dmalloc 2535=item --enable-dmalloc (default: off)
2451 2536
2452Use Gray Watson's malloc - which is good for debugging See 2537Use Gray Watson's malloc - which is good for debugging See
2453http://www.letters.com/dmalloc/ for details If you use either this or the 2538http://www.letters.com/dmalloc/ for details If you use either this or the
2454next option, you may need to edit src/Makefile after compiling to point 2539next option, you may need to edit src/Makefile after compiling to point
2455DINCLUDE and DLIB to the right places. 2540DINCLUDE and DLIB to the right places.
2456 2541
2457You can only use either this option and the following (should 2542You can only use either this option and the following (should
2458you use either) . 2543you use either) .
2459 2544
2460=item --enable-dlmalloc 2545=item --enable-dlmalloc (default: off)
2461 2546
2462Use Doug Lea's malloc - which is good for a production version 2547Use Doug Lea's malloc - which is good for a production version
2463See L<http://g.oswego.edu/dl/html/malloc.html> for details. 2548See L<http://g.oswego.edu/dl/html/malloc.html> for details.
2464 2549
2465=item --enable-smart-resize 2550=item --enable-smart-resize (default: on)
2466 2551
2467Add smart growth/shrink behaviour when changing font size via from hot 2552Add smart growth/shrink behaviour when changing font size via hot
2468keys. This should keep in a fixed position the rxvt corner which is 2553keys. This should keep the window corner which is closest to a corner of
2469closest to a corner of the screen. 2554the screen in a fixed position.
2470 2555
2471=item --enable-pointer-blank 2556=item --enable-pointer-blank (default: on)
2472 2557
2473Add support to have the pointer disappear when typing or inactive. 2558Add support to have the pointer disappear when typing or inactive.
2474 2559
2475=item --with-name=NAME 2560=item --with-name=NAME (default: urxvt)
2476 2561
2477Set the basename for the installed binaries (default: C<urxvt>, resulting 2562Set the basename for the installed binaries, resulting
2478in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with 2563in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with
2479C<rxvt>. 2564C<rxvt>.
2480 2565
2481=item --with-term=NAME 2566=item --with-term=NAME (default: rxvt-unicode)
2482 2567
2483Change the environmental variable for the terminal to NAME (default 2568Change the environmental variable for the terminal to NAME.
2484C<rxvt-unicode>)
2485 2569
2486=item --with-terminfo=PATH 2570=item --with-terminfo=PATH
2487 2571
2488Change the environmental variable for the path to the terminfo tree to 2572Change the environmental variable for the path to the terminfo tree to
2489PATH. 2573PATH.

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines